Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 375 insertions, 0 deletions

diff --git a/drivers/input/keyboard/hil_kbd.c b/drivers/input/keyboard/hil_kbd.c
new file mode 100644
index 00000000000..ef78bffed5e
--- /dev/null
+++ b/drivers/input/keyboard/hil_kbd.c
@@ -0,0 +1,375 @@
+/*
+ * Generic linux-input device driver for keyboard devices
+ *
+ * Copyright (c) 2001 Brian S. Julin
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL").
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ *
+ * References:
+ * HP-HIL Technical Reference Manual.  Hewlett Packard Product No. 45918A
+ *
+ */
+
+#include <linux/hil.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/pci_ids.h>
+
+#define PREFIX "HIL KEYB: "
+#define HIL_GENERIC_NAME "HIL keyboard"
+
+MODULE_AUTHOR("Brian S. Julin <bri@calyx.com>");
+MODULE_DESCRIPTION(HIL_GENERIC_NAME " driver");
+MODULE_LICENSE("Dual BSD/GPL");
+
+#define HIL_KBD_MAX_LENGTH 16
+
+#define HIL_KBD_SET1_UPBIT 0x01
+#define HIL_KBD_SET1_SHIFT 1
+static unsigned int hil_kbd_set1[HIL_KEYCODES_SET1_TBLSIZE] = 
+	{ HIL_KEYCODES_SET1 };
+
+#define HIL_KBD_SET2_UPBIT 0x01
+#define HIL_KBD_SET2_SHIFT 1
+/* Set2 is user defined */
+
+#define HIL_KBD_SET3_UPBIT 0x80
+#define HIL_KBD_SET3_SHIFT 0
+static unsigned int hil_kbd_set3[HIL_KEYCODES_SET3_TBLSIZE] =
+	{ HIL_KEYCODES_SET3 };
+
+static char hil_language[][16] = { HIL_LOCALE_MAP };
+
+struct hil_kbd {
+	struct input_dev dev;
+	struct serio *serio;
+
+	/* Input buffer and index for packets from HIL bus. */
+	hil_packet data[HIL_KBD_MAX_LENGTH];
+	int idx4; /* four counts per packet */
+
+	/* Raw device info records from HIL bus, see hil.h for fields. */
+	char	idd[HIL_KBD_MAX_LENGTH];	/* DID byte and IDD record */
+	char	rsc[HIL_KBD_MAX_LENGTH];	/* RSC record */
+	char	exd[HIL_KBD_MAX_LENGTH];	/* EXD record */
+	char	rnm[HIL_KBD_MAX_LENGTH + 1];	/* RNM record + NULL term. */
+
+	/* Something to sleep around with. */
+	struct semaphore sem;
+};
+
+/* Process a complete packet after transfer from the HIL */
+static void hil_kbd_process_record(struct hil_kbd *kbd)
+{
+	struct input_dev *dev = &kbd->dev;
+	hil_packet *data = kbd->data;
+	hil_packet p;
+	int idx, i, cnt;
+
+	idx = kbd->idx4/4;
+	p = data[idx - 1];
+
+	if ((p & ~HIL_CMDCT_POL) == 
+	    (HIL_ERR_INT | HIL_PKT_CMD | HIL_CMD_POL)) goto report;
+	if ((p & ~HIL_CMDCT_RPL) == 
+	    (HIL_ERR_INT | HIL_PKT_CMD | HIL_CMD_RPL)) goto report;
+
+	/* Not a poll response.  See if we are loading config records. */
+	switch (p & HIL_PKT_DATA_MASK) {
+	case HIL_CMD_IDD:
+		for (i = 0; i < idx; i++)
+			kbd->idd[i] = kbd->data[i] & HIL_PKT_DATA_MASK;
+		for (; i < HIL_KBD_MAX_LENGTH; i++)
+			kbd->idd[i] = 0;
+		break;
+	case HIL_CMD_RSC:
+		for (i = 0; i < idx; i++)
+			kbd->rsc[i] = kbd->data[i] & HIL_PKT_DATA_MASK;
+		for (; i < HIL_KBD_MAX_LENGTH; i++)
+			kbd->rsc[i] = 0;
+		break;
+	case HIL_CMD_EXD:
+		for (i = 0; i < idx; i++)
+			kbd->exd[i] = kbd->data[i] & HIL_PKT_DATA_MASK;
+		for (; i < HIL_KBD_MAX_LENGTH; i++)
+			kbd->exd[i] = 0;
+		break;
+	case HIL_CMD_RNM:
+		for (i = 0; i < idx; i++)
+			kbd->rnm[i] = kbd->data[i] & HIL_PKT_DATA_MASK;
+		for (; i < HIL_KBD_MAX_LENGTH + 1; i++)
+			kbd->rnm[i] = '\0';
+		break;
+	default:
+		/* These occur when device isn't present */
+		if (p == (HIL_ERR_INT | HIL_PKT_CMD)) break; 
+		/* Anything else we'd like to know about. */
+		printk(KERN_WARNING PREFIX "Device sent unknown record %x\n", p);
+		break;
+	}
+	goto out;
+
+ report:
+	cnt = 1;
+	switch (kbd->data[0] & HIL_POL_CHARTYPE_MASK) {
+	case HIL_POL_CHARTYPE_NONE:
+		break;
+	case HIL_POL_CHARTYPE_ASCII:
+		while (cnt < idx - 1)
+			input_report_key(dev, kbd->data[cnt++] & 0x7f, 1);
+		break;
+	case HIL_POL_CHARTYPE_RSVD1:
+	case HIL_POL_CHARTYPE_RSVD2:
+	case HIL_POL_CHARTYPE_BINARY:
+		while (cnt < idx - 1)
+			input_report_key(dev, kbd->data[cnt++], 1);
+		break;
+	case HIL_POL_CHARTYPE_SET1:
+		while (cnt < idx - 1) {
+			unsigned int key;
+			int up;
+			key = kbd->data[cnt++];
+			up = key & HIL_KBD_SET1_UPBIT;
+			key &= (~HIL_KBD_SET1_UPBIT & 0xff);
+			key = hil_kbd_set1[key >> HIL_KBD_SET1_SHIFT];
+			if (key != KEY_RESERVED)
+				input_report_key(dev, key, !up);
+		}
+		break;
+	case HIL_POL_CHARTYPE_SET2:
+		while (cnt < idx - 1) {
+			unsigned int key;
+			int up;
+			key = kbd->data[cnt++];
+			up = key & HIL_KBD_SET2_UPBIT;
+			key &= (~HIL_KBD_SET1_UPBIT & 0xff);
+			key = key >> HIL_KBD_SET2_SHIFT;
+			if (key != KEY_RESERVED)
+				input_report_key(dev, key, !up);
+		}
+		break;
+	case HIL_POL_CHARTYPE_SET3:
+		while (cnt < idx - 1) {
+			unsigned int key;
+			int up;
+			key = kbd->data[cnt++];
+			up = key & HIL_KBD_SET3_UPBIT;
+			key &= (~HIL_KBD_SET1_UPBIT & 0xff);
+			key = hil_kbd_set3[key >> HIL_KBD_SET3_SHIFT];
+			if (key != KEY_RESERVED)
+				input_report_key(dev, key, !up);
+		}
+		break;
+	}
+ out:
+	kbd->idx4 = 0;
+	up(&kbd->sem);
+}
+
+static void hil_kbd_process_err(struct hil_kbd *kbd) {
+	printk(KERN_WARNING PREFIX "errored HIL packet\n");
+	kbd->idx4 = 0;
+	up(&kbd->sem);
+}
+
+static irqreturn_t hil_kbd_interrupt(struct serio *serio, 
+	      unsigned char data, unsigned int flags, struct pt_regs *regs)
+{
+	struct hil_kbd *kbd;
+	hil_packet packet;
+	int idx;
+
+	kbd = (struct hil_kbd *)serio->private;
+	if (kbd == NULL) {
+		BUG();
+		return IRQ_HANDLED;
+	}
+
+	if (kbd->idx4 >= (HIL_KBD_MAX_LENGTH * sizeof(hil_packet))) {
+		hil_kbd_process_err(kbd);
+		return IRQ_HANDLED;
+	}
+	idx = kbd->idx4/4;
+	if (!(kbd->idx4 % 4)) kbd->data[idx] = 0;
+	packet = kbd->data[idx];
+	packet |= ((hil_packet)data) << ((3 - (kbd->idx4 % 4)) * 8);
+	kbd->data[idx] = packet;
+
+	/* Records of N 4-byte hil_packets must terminate with a command. */
+	if ((++(kbd->idx4)) % 4) return IRQ_HANDLED;
+	if ((packet & 0xffff0000) != HIL_ERR_INT) {
+		hil_kbd_process_err(kbd);
+		return IRQ_HANDLED;
+	}
+	if (packet & HIL_PKT_CMD) hil_kbd_process_record(kbd);
+	return IRQ_HANDLED;
+}
+
+static void hil_kbd_disconnect(struct serio *serio)
+{
+	struct hil_kbd *kbd;
+
+	kbd = (struct hil_kbd *)serio->private;
+	if (kbd == NULL) {
+		BUG();
+		return;
+	}
+
+	input_unregister_device(&kbd->dev);
+	serio_close(serio);
+	kfree(kbd);
+}
+
+static void hil_kbd_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct hil_kbd	*kbd;
+	uint8_t		did, *idd;
+	int		i;
+	
+	if (serio->type != (SERIO_HIL_MLC | SERIO_HIL)) return;
+
+	if (!(kbd = kmalloc(sizeof(struct hil_kbd), GFP_KERNEL))) return;
+	memset(kbd, 0, sizeof(struct hil_kbd));
+
+	if (serio_open(serio, drv)) goto bail0;
+
+	serio->private = kbd;
+	kbd->serio = serio;
+	kbd->dev.private = kbd;
+
+	init_MUTEX_LOCKED(&(kbd->sem));
+
+	/* Get device info.  MLC driver supplies devid/status/etc. */
+	serio->write(serio, 0);
+	serio->write(serio, 0);
+	serio->write(serio, HIL_PKT_CMD >> 8);
+	serio->write(serio, HIL_CMD_IDD);
+	down(&(kbd->sem));
+
+	serio->write(serio, 0);
+	serio->write(serio, 0);
+	serio->write(serio, HIL_PKT_CMD >> 8);
+	serio->write(serio, HIL_CMD_RSC);
+	down(&(kbd->sem));
+
+	serio->write(serio, 0);
+	serio->write(serio, 0);
+	serio->write(serio, HIL_PKT_CMD >> 8);
+	serio->write(serio, HIL_CMD_RNM);
+	down(&(kbd->sem));
+
+	serio->write(serio, 0);
+	serio->write(serio, 0);
+	serio->write(serio, HIL_PKT_CMD >> 8);
+	serio->write(serio, HIL_CMD_EXD);
+	down(&(kbd->sem));
+
+	up(&(kbd->sem));
+
+	did = kbd->idd[0];
+	idd = kbd->idd + 1;
+	switch (did & HIL_IDD_DID_TYPE_MASK) {
+	case HIL_IDD_DID_TYPE_KB_INTEGRAL:
+	case HIL_IDD_DID_TYPE_KB_ITF:
+	case HIL_IDD_DID_TYPE_KB_RSVD:
+	case HIL_IDD_DID_TYPE_CHAR:
+		printk(KERN_INFO PREFIX "HIL keyboard found (did = 0x%02x, lang = %s)\n",
+			did, hil_language[did & HIL_IDD_DID_TYPE_KB_LANG_MASK]);
+		break;
+	default:
+		goto bail1;
+	}
+
+	if(HIL_IDD_NUM_BUTTONS(idd) || HIL_IDD_NUM_AXES_PER_SET(*idd)) {
+		printk(KERN_INFO PREFIX "keyboards only, no combo devices supported.\n");
+		goto bail1;
+	}
+
+
+	kbd->dev.evbit[0]	= BIT(EV_KEY) | BIT(EV_REP);
+	kbd->dev.ledbit[0]	= BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_SCROLLL);
+	kbd->dev.keycodemax	= HIL_KEYCODES_SET1_TBLSIZE;
+	kbd->dev.keycodesize	= sizeof(hil_kbd_set1[0]);
+	kbd->dev.keycode	= hil_kbd_set1;
+	kbd->dev.name		= strlen(kbd->rnm) ? kbd->rnm : HIL_GENERIC_NAME;
+	kbd->dev.phys		= "hpkbd/input0";	/* XXX */
+
+	kbd->dev.id.bustype	= BUS_HIL;
+	kbd->dev.id.vendor	= PCI_VENDOR_ID_HP;
+	kbd->dev.id.product	= 0x0001; /* TODO: get from kbd->rsc */
+	kbd->dev.id.version	= 0x0100; /* TODO: get from kbd->rsc */
+	kbd->dev.dev		= &serio->dev;
+
+	for (i = 0; i < 128; i++) {
+		set_bit(hil_kbd_set1[i], kbd->dev.keybit);
+		set_bit(hil_kbd_set3[i], kbd->dev.keybit);
+	}
+	clear_bit(0, kbd->dev.keybit);
+
+	input_register_device(&kbd->dev);
+	printk(KERN_INFO "input: %s, ID: %d\n",
+		kbd->dev.name, did);
+
+	serio->write(serio, 0);
+	serio->write(serio, 0);
+	serio->write(serio, HIL_PKT_CMD >> 8);
+	serio->write(serio, HIL_CMD_EK1); /* Enable Keyswitch Autorepeat 1 */
+	down(&(kbd->sem));
+	up(&(kbd->sem));
+
+	return;
+ bail1:
+	serio_close(serio);
+ bail0:
+	kfree(kbd);
+}
+
+
+struct serio_driver hil_kbd_serio_drv = {
+	.driver		= {
+		.name	= "hil_kbd",
+	},
+	.description	= "HP HIL keyboard driver",
+	.connect 	= hil_kbd_connect,
+	.disconnect 	= hil_kbd_disconnect,
+	.interrupt 	= hil_kbd_interrupt
+};
+
+static int __init hil_kbd_init(void)
+{
+	serio_register_driver(&hil_kbd_serio_drv);
+        return 0;
+}
+                
+static void __exit hil_kbd_exit(void)
+{
+	serio_unregister_driver(&hil_kbd_serio_drv);
+}
+                        
+module_init(hil_kbd_init);
+module_exit(hil_kbd_exit);