Merge branch 'poll' into staging/for_v3.4

* poll: (5970 commits)
  poll: add poll_requested_events() and poll_does_not_wait() functions
  crc32: select an algorithm via Kconfig
  crc32: add self-test code for crc32c
  crypto: crc32c should use library implementation
  crc32: bolt on crc32c
  crc32: add note about this patchset to crc32.c
  crc32: optimize loop counter for x86
  crc32: add slice-by-8 algorithm to existing code
  crc32: make CRC_*_BITS definition correspond to actual bit counts
  crc32: fix mixing of endian-specific types
  crc32: miscellaneous cleanups
  crc32: simplify unit test code
  crc32: move long comment about crc32 fundamentals to Documentation/
  crc32: remove two instances of trailing whitespaces
  checkpatch: check for quoted strings broken across lines
  checkpatch: whitespace - add/remove blank lines
  checkpatch: warn on use of yield()
  checkpatch: add --strict tests for braces, comments and casts
  checkpatch: add [] to type extensions
  checkpatch: high precedence operators do not require additional parentheses in #defines
  ...

5 files changed, 24 insertions, 8 deletions

diff --git a/Documentation/DocBook/80211.tmpl b/Documentation/DocBook/80211.tmpl
index 2014155c899..c5ac6929c41 100644
--- a/Documentation/DocBook/80211.tmpl
+++ b/Documentation/DocBook/80211.tmpl
@@ -129,7 +129,6 @@
 !Finclude/net/cfg80211.h cfg80211_pmksa
 !Finclude/net/cfg80211.h cfg80211_send_rx_auth
 !Finclude/net/cfg80211.h cfg80211_send_auth_timeout
-!Finclude/net/cfg80211.h __cfg80211_auth_canceled
 !Finclude/net/cfg80211.h cfg80211_send_rx_assoc
 !Finclude/net/cfg80211.h cfg80211_send_assoc_timeout
 !Finclude/net/cfg80211.h cfg80211_send_deauth
diff --git a/Documentation/DocBook/filesystems.tmpl b/Documentation/DocBook/filesystems.tmpl
index f51f28531b8..3fca32c4192 100644
--- a/Documentation/DocBook/filesystems.tmpl
+++ b/Documentation/DocBook/filesystems.tmpl
@@ -387,7 +387,7 @@ an example.
      <title>See also</title>
 	<para>
 	  <citation>
-	   <ulink url="ftp://ftp.uk.linux.org/pub/linux/sct/fs/jfs/journal-design.ps.gz">
+	   <ulink url="http://kernel.org/pub/linux/kernel/people/sct/ext3/journal-design.ps.gz">
 	   	Journaling the Linux ext2fs Filesystem, LinuxExpo 98, Stephen Tweedie
 	   </ulink>
 	  </citation>
diff --git a/Documentation/DocBook/kgdb.tmpl b/Documentation/DocBook/kgdb.tmpl
index d71b57fcf11..4ee4ba3509f 100644
--- a/Documentation/DocBook/kgdb.tmpl
+++ b/Documentation/DocBook/kgdb.tmpl
@@ -362,6 +362,23 @@
    </para>
   </para>
   </sect1>
+   <sect1 id="kgdbreboot">
+   <title>Run time parameter: kgdbreboot</title>
+   <para> The kgdbreboot feature allows you to change how the debugger
+   deals with the reboot notification.  You have 3 choices for the
+   behavior.  The default behavior is always set to 0.</para>
+   <orderedlist>
+   <listitem><para>echo -1 > /sys/module/debug_core/parameters/kgdbreboot</para>
+   <para>Ignore the reboot notification entirely.</para>
+   </listitem>
+   <listitem><para>echo 0 > /sys/module/debug_core/parameters/kgdbreboot</para>
+   <para>Send the detach message to any attached debugger client.</para>
+   </listitem>
+   <listitem><para>echo 1 > /sys/module/debug_core/parameters/kgdbreboot</para>
+   <para>Enter the debugger on reboot notify.</para>
+   </listitem>
+   </orderedlist>
+  </sect1>
   </chapter>
   <chapter id="usingKDB">
   <title>Using kdb</title>
diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl
index cdd1bb9aac0..31df1aa0071 100644
--- a/Documentation/DocBook/libata.tmpl
+++ b/Documentation/DocBook/libata.tmpl
@@ -22,8 +22,8 @@
    <para>
    The contents of this file are subject to the Open
    Software License version 1.1 that can be found at
-   <ulink url="http://www.opensource.org/licenses/osl-1.1.txt">http://www.opensource.org/licenses/osl-1.1.txt</ulink> and is included herein
-   by reference.
+   <ulink url="http://fedoraproject.org/wiki/Licensing:OSL1.1">http://fedoraproject.org/wiki/Licensing:OSL1.1</ulink>
+   and is included herein by reference.
    </para>
 
    <para>
@@ -945,7 +945,7 @@ and other resources, etc.
 
         <listitem>
 	<para>
-	!BSY &amp;&amp; ERR after CDB tranfer starts but before the
+	!BSY &amp;&amp; ERR after CDB transfer starts but before the
         last byte of CDB is transferred.  ATA/ATAPI standard states
         that &quot;The device shall not terminate the PACKET command
         with an error before the last byte of the command packet has
@@ -1050,7 +1050,7 @@ and other resources, etc.
 	   to complete a command.  Combined with the fact that MWDMA
 	   and PIO transfer errors aren't allowed to use ICRC bit up to
 	   ATA/ATAPI-7, it seems to imply that ABRT bit alone could
-	   indicate tranfer errors.
+	   indicate transfer errors.
 	   </para>
 	   <para>
 	   However, ATA/ATAPI-8 draft revision 1f removes the part
diff --git a/Documentation/DocBook/media/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml
index dd958b5a34e..bce97c50391 100644
--- a/Documentation/DocBook/media/v4l/compat.xml
+++ b/Documentation/DocBook/media/v4l/compat.xml
@@ -444,7 +444,7 @@ linkend="pixfmt-rgb"><constant>V4L2_PIX_FMT_BGR24</constant></link></para></entr
 		<entry><para><link
 linkend="pixfmt-rgb"><constant>V4L2_PIX_FMT_BGR32</constant></link><footnote>
 		      <para>Presumably all V4L RGB formats are
-little-endian, although some drivers might interpret them according to machine endianess. V4L2 defines little-endian, big-endian and red/blue
+little-endian, although some drivers might interpret them according to machine endianness. V4L2 defines little-endian, big-endian and red/blue
 swapped variants. For details see <xref linkend="pixfmt-rgb" />.</para>
 		    </footnote></para></entry>
 	      </row>
@@ -823,7 +823,7 @@ standard); 35468950&nbsp;Hz PAL and SECAM (625-line standards)</entry>
 		<row>
 		  <entry>sample_format</entry>
 		  <entry>V4L2_PIX_FMT_GREY. The last four bytes (a
-machine endianess integer) contain a frame counter.</entry>
+machine endianness integer) contain a frame counter.</entry>
 		</row>
 		<row>
 		  <entry>start[]</entry>