summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-07-23 17:34:48 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2012-07-23 17:34:48 -0700
commitf1d2c07d331f717da79a42952be7dc1c0d35f846 (patch)
tree5bc98d2d63a37b688b40a4641855c512b385d0ae
parenta17f29a5e98c0a32a900a773083c719e27f4bc0e (diff)
parentd003e09891fdc0c170b99328eba7ed004809ef5a (diff)
Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull arm-soc board specific updates from Arnd Bergmann: "These changes are all for individual board files. In the long run, those files will largely go away, and the amount of changes appears to be continuously decreasing, which is a good sign. This time around, changes are focused on tegra, omap and samsung." Fix conflicts in arch/arm/mach-{omap2/common-board-devices.c,tegra/Makefile.boot} as per the 'for-linus' branch. * tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits) ARM: EXYNOS: Add leds status1 and status2 on Origen board ARM: S3C64XX: Mark most Cragganmore initdata devinitdata ARM: EXYNOS: Add missing .reserve field to SMDKC210 ARM: EXYNOS: Add DRM device to SMDK4X12 board ARM: S3C64XX: Clean up after SPI driver platform data updates ARM: SAMSUNG: no need to set the value for clk_xusbxti when it is 24Mhz ARM: EXYNOS: Add framebuffer support for SMDK4X12 ARM: EXYNOS: Add HSOTG support to SMDK4X12 ARM: S5PV210: Add audio platform device in Goni board ARM: S5PV210: Add audio platform device in Aquila board ARM: EXYNOS: Add audio platform device in SMDKV310 board ARM: S3C64XX: Don't specify an irq_base for WM1192-EV1 board ARM: OMAP3: Fix omap3evm randconfig error introduced by VBUS support ARM: OMAP: board-omap4panda: MUX configuration for sys_nirq2 ARM: OMAP: board-4430sdp: MUX configuration for sys_nirq2 ARM: OMAP3530evm: set pendown_state and debounce time for ads7846 ARM: omap3evm: enable VBUS switch for EHCI tranceiver ARM: OMAP3EVM: Adding USB internal LDOs board file ARM: OMAP3EVM: Add NAND flash definition ARM: OMAP3: cm-t35: add tvp5150 decoder support ...
-rw-r--r--arch/arm/Kconfig1
-rw-r--r--arch/arm/mach-exynos/Kconfig7
-rw-r--r--arch/arm/mach-exynos/mach-nuri.c3
-rw-r--r--arch/arm/mach-exynos/mach-origen.c39
-rw-r--r--arch/arm/mach-exynos/mach-smdk4x12.c83
-rw-r--r--arch/arm/mach-exynos/mach-smdkv310.c17
-rw-r--r--arch/arm/mach-exynos/mach-universal_c210.c3
-rw-r--r--arch/arm/mach-omap2/Makefile4
-rw-r--r--arch/arm/mach-omap2/board-4430sdp.c3
-rw-r--r--arch/arm/mach-omap2/board-cm-t35.c89
-rw-r--r--arch/arm/mach-omap2/board-omap3evm.c78
-rw-r--r--arch/arm/mach-omap2/board-omap4panda.c3
-rw-r--r--arch/arm/mach-omap2/common-board-devices.c11
-rw-r--r--arch/arm/mach-omap2/common-board-devices.h1
-rw-r--r--arch/arm/mach-omap2/drm.c61
-rw-r--r--arch/arm/mach-s3c64xx/include/mach/crag6410.h4
-rw-r--r--arch/arm/mach-s3c64xx/mach-crag6410-module.c11
-rw-r--r--arch/arm/mach-s3c64xx/mach-crag6410.c69
-rw-r--r--arch/arm/mach-s3c64xx/mach-smdk6410.c1
-rw-r--r--arch/arm/mach-s5pv210/Kconfig2
-rw-r--r--arch/arm/mach-s5pv210/mach-aquila.c7
-rw-r--r--arch/arm/mach-s5pv210/mach-goni.c11
-rw-r--r--arch/arm/mach-s5pv210/mach-smdkv210.c10
-rw-r--r--arch/arm/mach-tegra/Kconfig36
-rw-r--r--arch/arm/mach-tegra/Makefile13
-rw-r--r--arch/arm/mach-tegra/Makefile.boot10
-rw-r--r--arch/arm/mach-tegra/board-dt-tegra20.c74
-rw-r--r--arch/arm/mach-tegra/board-dt-tegra30.c8
-rw-r--r--arch/arm/mach-tegra/board-harmony-pcie.c15
-rw-r--r--arch/arm/mach-tegra/board-harmony-power.c25
-rw-r--r--arch/arm/mach-tegra/board-paz00.c7
-rw-r--r--arch/arm/mach-tegra/board-seaboard-pinmux.c197
-rw-r--r--arch/arm/mach-tegra/board-seaboard.c306
-rw-r--r--arch/arm/mach-tegra/board-seaboard.h47
-rw-r--r--arch/arm/mach-tegra/board.h9
-rw-r--r--drivers/staging/omapdrm/omap_drv.h2
-rw-r--r--include/linux/platform_data/omap_drm.h (renamed from drivers/staging/omapdrm/omap_priv.h)19
37 files changed, 593 insertions, 693 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index b1639621689..dc3de407ce0 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -683,6 +683,7 @@ config ARCH_TEGRA
select MIGHT_HAVE_CACHE_L2X0
select NEED_MACH_IO_H if PCI
select ARCH_HAS_CPUFREQ
+ select USE_OF
help
This enables support for NVIDIA Tegra based systems (Tegra APX,
Tegra 6xx and Tegra 2 series).
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 6f6d13f91e4..b5b4c8c9db1 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -207,6 +207,7 @@ config MACH_SMDKV310
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
+ select S3C_DEV_USB_HSOTG
select SAMSUNG_DEV_BACKLIGHT
select EXYNOS_DEV_DRM
select EXYNOS_DEV_SYSMMU
@@ -326,6 +327,7 @@ config MACH_ORIGEN
select S3C_DEV_WDT
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC2
+ select S3C_DEV_USB_HSOTG
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
@@ -360,22 +362,27 @@ config MACH_SMDK4212
select S3C_DEV_I2C3
select S3C_DEV_I2C7
select S3C_DEV_RTC
+ select S3C_DEV_USB_HSOTG
select S3C_DEV_WDT
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
select S5P_DEV_FIMC3
+ select S5P_DEV_FIMD0
select S5P_DEV_MFC
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_KEYPAD
select SAMSUNG_DEV_PWM
select EXYNOS_DEV_SYSMMU
select EXYNOS_DEV_DMA
+ select EXYNOS_DEV_DRM
+ select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C7
select EXYNOS4_SETUP_KEYPAD
select EXYNOS4_SETUP_SDHCI
+ select EXYNOS4_SETUP_USB_PHY
help
Machine support for Samsung SMDK4212
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index f3b328d0aff..f98a83a81ce 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -1341,9 +1341,8 @@ static struct platform_device *nuri_devices[] __initdata = {
static void __init nuri_map_io(void)
{
- clk_xusbxti.rate = 24000000;
exynos_init_io(NULL, 0);
- s3c24xx_init_clocks(24000000);
+ s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs));
}
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index 873c708fd34..5a12dc26f49 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -9,6 +9,7 @@
*/
#include <linux/serial_core.h>
+#include <linux/leds.h>
#include <linux/gpio.h>
#include <linux/mmc/host.h>
#include <linux/platform_device.h>
@@ -21,6 +22,7 @@
#include <linux/mfd/max8997.h>
#include <linux/lcd.h>
#include <linux/rfkill-gpio.h>
+#include <linux/platform_data/s3c-hsotg.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
@@ -498,6 +500,37 @@ static void __init origen_ohci_init(void)
exynos4_ohci_set_platdata(pdata);
}
+/* USB OTG */
+static struct s3c_hsotg_plat origen_hsotg_pdata;
+
+static struct gpio_led origen_gpio_leds[] = {
+ {
+ .name = "origen::status1",
+ .default_trigger = "heartbeat",
+ .gpio = EXYNOS4_GPX1(3),
+ .active_low = 1,
+ },
+ {
+ .name = "origen::status2",
+ .default_trigger = "mmc0",
+ .gpio = EXYNOS4_GPX1(4),
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data origen_gpio_led_info = {
+ .leds = origen_gpio_leds,
+ .num_leds = ARRAY_SIZE(origen_gpio_leds),
+};
+
+static struct platform_device origen_leds_gpio = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &origen_gpio_led_info,
+ },
+};
+
static struct gpio_keys_button origen_gpio_keys_table[] = {
{
.code = KEY_MENU,
@@ -654,6 +687,7 @@ static struct platform_device *origen_devices[] __initdata = {
&s3c_device_hsmmc0,
&s3c_device_i2c0,
&s3c_device_rtc,
+ &s3c_device_usb_hsotg,
&s3c_device_wdt,
&s5p_device_ehci,
&s5p_device_fimc0,
@@ -676,6 +710,7 @@ static struct platform_device *origen_devices[] __initdata = {
&exynos4_device_ohci,
&origen_device_gpiokeys,
&origen_lcd_hv070wsa,
+ &origen_leds_gpio,
&origen_device_bluetooth,
};
@@ -711,7 +746,7 @@ static void s5p_tv_setup(void)
static void __init origen_map_io(void)
{
exynos_init_io(NULL, 0);
- s3c24xx_init_clocks(24000000);
+ s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
}
@@ -743,7 +778,7 @@ static void __init origen_machine_init(void)
origen_ehci_init();
origen_ohci_init();
- clk_xusbxti.rate = 24000000;
+ s3c_hsotg_set_platdata(&origen_hsotg_pdata);
s5p_tv_setup();
s5p_i2c_hdmiphy_set_platdata(NULL);
diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c
index fb09c70e195..b26beb13ebe 100644
--- a/arch/arm/mach-exynos/mach-smdk4x12.c
+++ b/arch/arm/mach-exynos/mach-smdk4x12.c
@@ -13,12 +13,14 @@
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/io.h>
+#include <linux/lcd.h>
#include <linux/mfd/max8997.h>
#include <linux/mmc/host.h>
#include <linux/platform_device.h>
#include <linux/pwm_backlight.h>
#include <linux/regulator/machine.h>
#include <linux/serial_core.h>
+#include <linux/platform_data/s3c-hsotg.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
@@ -28,15 +30,18 @@
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
+#include <plat/fb.h>
#include <plat/gpio-cfg.h>
#include <plat/iic.h>
#include <plat/keypad.h>
#include <plat/mfc.h>
+#include <plat/regs-fb.h>
#include <plat/regs-serial.h>
#include <plat/sdhci.h>
#include <mach/map.h>
+#include <drm/exynos_drm.h>
#include "common.h"
/* Following are default values for UCON, ULCON and UFCON UART registers */
@@ -219,8 +224,10 @@ static struct platform_pwm_backlight_data smdk4x12_bl_data = {
static uint32_t smdk4x12_keymap[] __initdata = {
/* KEY(row, col, keycode) */
- KEY(1, 0, KEY_D), KEY(1, 1, KEY_A), KEY(1, 2, KEY_B),
- KEY(1, 3, KEY_E), KEY(1, 4, KEY_C)
+ KEY(1, 3, KEY_1), KEY(1, 4, KEY_2), KEY(1, 5, KEY_3),
+ KEY(1, 6, KEY_4), KEY(1, 7, KEY_5),
+ KEY(2, 5, KEY_D), KEY(2, 6, KEY_A), KEY(2, 7, KEY_B),
+ KEY(0, 7, KEY_E), KEY(0, 5, KEY_C)
};
static struct matrix_keymap_data smdk4x12_keymap_data __initdata = {
@@ -230,10 +237,62 @@ static struct matrix_keymap_data smdk4x12_keymap_data __initdata = {
static struct samsung_keypad_platdata smdk4x12_keypad_data __initdata = {
.keymap_data = &smdk4x12_keymap_data,
- .rows = 2,
- .cols = 5,
+ .rows = 3,
+ .cols = 8,
};
+#ifdef CONFIG_DRM_EXYNOS
+static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
+ .panel = {
+ .timing = {
+ .left_margin = 8,
+ .right_margin = 8,
+ .upper_margin = 6,
+ .lower_margin = 6,
+ .hsync_len = 6,
+ .vsync_len = 4,
+ .xres = 480,
+ .yres = 800,
+ },
+ },
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ .default_win = 0,
+ .bpp = 32,
+};
+#else
+static struct s3c_fb_pd_win smdk4x12_fb_win0 = {
+ .xres = 480,
+ .yres = 800,
+ .virtual_x = 480,
+ .virtual_y = 800 * 2,
+ .max_bpp = 32,
+ .default_bpp = 24,
+};
+
+static struct fb_videomode smdk4x12_lcd_timing = {
+ .left_margin = 8,
+ .right_margin = 8,
+ .upper_margin = 6,
+ .lower_margin = 6,
+ .hsync_len = 6,
+ .vsync_len = 4,
+ .xres = 480,
+ .yres = 800,
+};
+
+static struct s3c_fb_platdata smdk4x12_lcd_pdata __initdata = {
+ .win[0] = &smdk4x12_fb_win0,
+ .vtiming = &smdk4x12_lcd_timing,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ .setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
+};
+#endif
+
+/* USB OTG */
+static struct s3c_hsotg_plat smdk4x12_hsotg_pdata;
+
static struct platform_device *smdk4x12_devices[] __initdata = {
&s3c_device_hsmmc2,
&s3c_device_hsmmc3,
@@ -242,22 +301,25 @@ static struct platform_device *smdk4x12_devices[] __initdata = {
&s3c_device_i2c3,
&s3c_device_i2c7,
&s3c_device_rtc,
+ &s3c_device_usb_hsotg,
&s3c_device_wdt,
&s5p_device_fimc0,
&s5p_device_fimc1,
&s5p_device_fimc2,
&s5p_device_fimc3,
&s5p_device_fimc_md,
+ &s5p_device_fimd0,
&s5p_device_mfc,
&s5p_device_mfc_l,
&s5p_device_mfc_r,
+#ifdef CONFIG_DRM_EXYNOS
+ &exynos_device_drm,
+#endif
&samsung_device_keypad,
};
static void __init smdk4x12_map_io(void)
{
- clk_xusbxti.rate = 24000000;
-
exynos_init_io(NULL, 0);
s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs));
@@ -293,6 +355,15 @@ static void __init smdk4x12_machine_init(void)
s3c_sdhci2_set_platdata(&smdk4x12_hsmmc2_pdata);
s3c_sdhci3_set_platdata(&smdk4x12_hsmmc3_pdata);
+ s3c_hsotg_set_platdata(&smdk4x12_hsotg_pdata);
+
+#ifdef CONFIG_DRM_EXYNOS
+ s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
+ exynos4_fimd0_gpio_setup_24bpp();
+#else
+ s5p_fimd0_set_platdata(&smdk4x12_lcd_pdata);
+#endif
+
platform_add_devices(smdk4x12_devices, ARRAY_SIZE(smdk4x12_devices));
}
diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c
index 5fb209c4a59..3cfa688d274 100644
--- a/arch/arm/mach-exynos/mach-smdkv310.c
+++ b/arch/arm/mach-exynos/mach-smdkv310.c
@@ -19,6 +19,7 @@
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/pwm_backlight.h>
+#include <linux/platform_data/s3c-hsotg.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
@@ -270,6 +271,15 @@ static void __init smdkv310_ohci_init(void)
exynos4_ohci_set_platdata(pdata);
}
+/* USB OTG */
+static struct s3c_hsotg_plat smdkv310_hsotg_pdata;
+
+/* Audio device */
+static struct platform_device smdkv310_device_audio = {
+ .name = "smdk-audio",
+ .id = -1,
+};
+
static struct platform_device *smdkv310_devices[] __initdata = {
&s3c_device_hsmmc0,
&s3c_device_hsmmc1,
@@ -278,6 +288,7 @@ static struct platform_device *smdkv310_devices[] __initdata = {
&s3c_device_i2c1,
&s5p_device_i2c_hdmiphy,
&s3c_device_rtc,
+ &s3c_device_usb_hsotg,
&s3c_device_wdt,
&s5p_device_ehci,
&s5p_device_fimc0,
@@ -301,6 +312,7 @@ static struct platform_device *smdkv310_devices[] __initdata = {
&samsung_asoc_dma,
&samsung_asoc_idma,
&s5p_device_fimd0,
+ &smdkv310_device_audio,
&smdkv310_lcd_lte480wv,
&smdkv310_smsc911x,
&exynos4_device_ahci,
@@ -353,7 +365,7 @@ static void s5p_tv_setup(void)
static void __init smdkv310_map_io(void)
{
exynos_init_io(NULL, 0);
- s3c24xx_init_clocks(24000000);
+ s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs));
}
@@ -389,7 +401,7 @@ static void __init smdkv310_machine_init(void)
smdkv310_ehci_init();
smdkv310_ohci_init();
- clk_xusbxti.rate = 24000000;
+ s3c_hsotg_set_platdata(&smdkv310_hsotg_pdata);
platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
}
@@ -416,5 +428,6 @@ MACHINE_START(SMDKC210, "SMDKC210")
.init_machine = smdkv310_machine_init,
.init_late = exynos_init_late,
.timer = &exynos4_timer,
+ .reserve = &smdkv310_reserve,
.restart = exynos4_restart,
MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index 68719f57dce..4d1f40d44ed 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -1099,9 +1099,8 @@ static struct platform_device *universal_devices[] __initdata = {
static void __init universal_map_io(void)
{
- clk_xusbxti.rate = 24000000;
exynos_init_io(NULL, 0);
- s3c24xx_init_clocks(24000000);
+ s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
s5p_set_timer_source(S5P_PWM2, S5P_PWM4);
}
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index b779ddd86fa..19b771d0c0d 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -217,6 +217,10 @@ endif
# OMAP2420 MSDI controller integration support ("MMC")
obj-$(CONFIG_SOC_OMAP2420) += msdi.o
+ifneq ($(CONFIG_DRM_OMAP),)
+obj-y += drm.o
+endif
+
# Specific board support
obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 8e17284a803..ad8a7d94afc 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -821,6 +821,9 @@ static void __init omap_4430sdp_display_init(void)
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
OMAP4_MUX(USBB2_ULPITLL_CLK, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+ /* NIRQ2 for twl6040 */
+ OMAP4_MUX(SYS_NIRQ2, OMAP_MUX_MODE0 |
+ OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE),
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index ded100c80a9..97d719047af 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -490,6 +490,71 @@ static struct twl4030_platform_data cm_t35_twldata = {
.power = &cm_t35_power_data,
};
+#if defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE)
+#include <media/omap3isp.h>
+#include "devices.h"
+
+static struct i2c_board_info cm_t35_isp_i2c_boardinfo[] = {
+ {
+ I2C_BOARD_INFO("mt9t001", 0x5d),
+ },
+ {
+ I2C_BOARD_INFO("tvp5150", 0x5c),
+ },
+};
+
+static struct isp_subdev_i2c_board_info cm_t35_isp_primary_subdevs[] = {
+ {
+ .board_info = &cm_t35_isp_i2c_boardinfo[0],
+ .i2c_adapter_id = 3,
+ },
+ { NULL, 0, },
+};
+
+static struct isp_subdev_i2c_board_info cm_t35_isp_secondary_subdevs[] = {
+ {
+ .board_info = &cm_t35_isp_i2c_boardinfo[1],
+ .i2c_adapter_id = 3,
+ },
+ { NULL, 0, },
+};
+
+static struct isp_v4l2_subdevs_group cm_t35_isp_subdevs[] = {
+ {
+ .subdevs = cm_t35_isp_primary_subdevs,
+ .interface = ISP_INTERFACE_PARALLEL,
+ .bus = {
+ .parallel = {
+ .clk_pol = 1,
+ },
+ },
+ },
+ {
+ .subdevs = cm_t35_isp_secondary_subdevs,
+ .interface = ISP_INTERFACE_PARALLEL,
+ .bus = {
+ .parallel = {
+ .clk_pol = 0,
+ },
+ },
+ },
+ { NULL, 0, },
+};
+
+static struct isp_platform_data cm_t35_isp_pdata = {
+ .subdevs = cm_t35_isp_subdevs,
+};
+
+static void __init cm_t35_init_camera(void)
+{
+ if (omap3_init_camera(&cm_t35_isp_pdata) < 0)
+ pr_warn("CM-T3x: Failed registering camera device!\n");
+}
+
+#else
+static inline void cm_t35_init_camera(void) {}
+#endif /* CONFIG_VIDEO_OMAP3 */
+
static void __init cm_t35_init_i2c(void)
{
omap3_pmic_get_config(&cm_t35_twldata, TWL_COMMON_PDATA_USB,
@@ -497,6 +562,8 @@ static void __init cm_t35_init_i2c(void)
TWL_COMMON_PDATA_AUDIO);
omap3_pmic_init("tps65930", &cm_t35_twldata);
+
+ omap_register_i2c_bus(3, 400, NULL, 0);
}
#ifdef CONFIG_OMAP_MUX
@@ -574,6 +641,27 @@ static struct omap_board_mux board_mux[] __initdata = {
OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ /* Camera */
+ OMAP3_MUX(CAM_HS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_VS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_XCLKA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_FLD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_D0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_D1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_D2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_D3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_D4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_D5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_D6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_D7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(CAM_D8, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+ OMAP3_MUX(CAM_D9, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+ OMAP3_MUX(CAM_STROBE, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+ OMAP3_MUX(CAM_D10, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLDOWN),
+ OMAP3_MUX(CAM_D11, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLDOWN),
+
/* display controls */
OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
OMAP3_MUX(GPMC_NCS7, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
@@ -646,6 +734,7 @@ static void __init cm_t3x_common_init(void)
usb_musb_init(NULL);
cm_t35_init_usbh();
+ cm_t35_init_camera();
}
static void __init cm_t35_init(void)
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 639bd07ea38..ef230a0eb5e 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -24,6 +24,10 @@
#include <linux/leds.h>
#include <linux/interrupt.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/i2c/twl.h>
@@ -43,6 +47,7 @@
#include <plat/board.h>
#include <plat/usb.h>
+#include <plat/nand.h>
#include "common.h"
#include <plat/mcspi.h>
#include <video/omapdss.h>
@@ -53,7 +58,6 @@
#include "hsmmc.h"
#include "common-board-devices.h"
-#define OMAP3_EVM_TS_GPIO 175
#define OMAP3_EVM_EHCI_VBUS 22
#define OMAP3_EVM_EHCI_SELECT 61
@@ -355,6 +359,19 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
platform_device_register(&leds_gpio);
+ /* Enable VBUS switch by setting TWL4030.GPIO2DIR as output
+ * for starting USB tranceiver
+ */
+#ifdef CONFIG_TWL4030_CORE
+ if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) {
+ u8 val;
+
+ twl_i2c_read_u8(TWL4030_MODULE_GPIO, &val, REG_GPIODATADIR1);
+ val |= 0x04; /* TWL4030.GPIO2DIR BIT at GPIODATADIR1(0x9B) */
+ twl_i2c_write_u8(TWL4030_MODULE_GPIO, val, REG_GPIODATADIR1);
+ }
+#endif
+
return 0;
}
@@ -461,6 +478,28 @@ struct wl12xx_platform_data omap3evm_wlan_data __initdata = {
};
#endif
+/* VAUX2 for USB */
+static struct regulator_consumer_supply omap3evm_vaux2_supplies[] = {
+ REGULATOR_SUPPLY("VDD_CSIPHY1", "omap3isp"), /* OMAP ISP */
+ REGULATOR_SUPPLY("VDD_CSIPHY2", "omap3isp"), /* OMAP ISP */
+ REGULATOR_SUPPLY("hsusb1", "ehci-omap.0"),
+ REGULATOR_SUPPLY("vaux2", NULL),
+};
+
+static struct regulator_init_data omap3evm_vaux2 = {
+ .constraints = {
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(omap3evm_vaux2_supplies),
+ .consumer_supplies = omap3evm_vaux2_supplies,
+};
+
static struct twl4030_platform_data omap3evm_twldata = {
/* platform_data for children goes here */
.keypad = &omap3evm_kp_data,
@@ -607,6 +646,37 @@ static struct regulator_consumer_supply dummy_supplies[] = {
REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
};
+static struct mtd_partition omap3evm_nand_partitions[] = {
+ /* All the partition sizes are listed in terms of NAND block size */
+ {
+ .name = "X-Loader",
+ .offset = 0,
+ .size = 4*(SZ_128K),
+ .mask_flags = MTD_WRITEABLE
+ },
+ {
+ .name = "U-Boot",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 14*(SZ_128K),
+ .mask_flags = MTD_WRITEABLE
+ },
+ {
+ .name = "U-Boot Env",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 2*(SZ_128K)
+ },
+ {
+ .name = "Kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 40*(SZ_128K)
+ },
+ {
+ .name = "File system",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
+ },
+};
+
static void __init omap3_evm_init(void)
{
struct omap_board_mux *obm;
@@ -623,6 +693,9 @@ static void __init omap3_evm_init(void)
omap_mux_init_gpio(63, OMAP_PIN_INPUT);
omap_hsmmc_init(mmc);
+ if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
+ omap3evm_twldata.vaux2 = &omap3evm_vaux2;
+
omap3_evm_i2c_init();
omap_display_init(&omap3_evm_dss_data);
@@ -656,6 +729,9 @@ static void __init omap3_evm_init(void)
}
usb_musb_init(&musb_board_data);
usbhs_init(&usbhs_bdata);
+ omap_nand_flash_init(NAND_BUSWIDTH_16, omap3evm_nand_partitions,
+ ARRAY_SIZE(omap3evm_nand_partitions));
+
omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL);
omap3evm_init_smsc911x();
omap3_evm_display_init();
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 982fb2622ab..b627cdc12b8 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -379,6 +379,9 @@ static struct omap_board_mux board_mux[] __initdata = {
OMAP4_MUX(DPM_EMU18, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
/* dispc2_data0 */
OMAP4_MUX(DPM_EMU19, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+ /* NIRQ2 for twl6040 */
+ OMAP4_MUX(SYS_NIRQ2, OMAP_MUX_MODE0 |
+ OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE),
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
index c1875862679..14734746457 100644
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
@@ -35,6 +35,16 @@ static struct omap2_mcspi_device_config ads7846_mcspi_config = {
.turbo_mode = 0,
};
+/*
+ * ADS7846 driver maybe request a gpio according to the value
+ * of pdata->get_pendown_state, but we have done this. So set
+ * get_pendown_state to avoid twice gpio requesting.
+ */
+static int omap3_get_pendown_state(void)
+{
+ return !gpio_get_value(OMAP3_EVM_TS_GPIO);
+}
+
static struct ads7846_platform_data ads7846_config = {
.x_max = 0x0fff,
.y_max = 0x0fff,
@@ -45,6 +55,7 @@ static struct ads7846_platform_data ads7846_config = {
.debounce_rep = 1,
.gpio_pendown = -EINVAL,
.keep_vref_on = 1,
+ .get_pendown_state = &omap3_get_pendown_state,
};
static struct spi_board_info ads7846_spi_board_info __initdata = {
diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h
index a0b4a42836a..4c4ef6a6166 100644
--- a/arch/arm/mach-omap2/common-board-devices.h
+++ b/arch/arm/mach-omap2/common-board-devices.h
@@ -4,6 +4,7 @@
#include "twl-common.h"
#define NAND_BLOCK_SIZE SZ_128K
+#define OMAP3_EVM_TS_GPIO 175
struct mtd_partition;
struct ads7846_platform_data;
diff --git a/arch/arm/mach-omap2/drm.c b/arch/arm/mach-omap2/drm.c
new file mode 100644
index 00000000000..72e0f01b715
--- /dev/null
+++ b/arch/arm/mach-omap2/drm.c
@@ -0,0 +1,61 @@
+/*
+ * DRM/KMS device registration for TI OMAP platforms
+ *
+ * Copyright (C) 2012 Texas Instruments
+ * Author: Rob Clark <rob.clark@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <plat/omap_device.h>
+#include <plat/omap_hwmod.h>
+
+#if defined(CONFIG_DRM_OMAP) || (CONFIG_DRM_OMAP_MODULE)
+
+static struct platform_device omap_drm_device = {
+ .dev = {
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .name = "omapdrm",
+ .id = 0,
+};
+
+static int __init omap_init_drm(void)
+{
+ struct omap_hwmod *oh = NULL;
+ struct platform_device *pdev;
+
+ /* lookup and populate the DMM information, if present - OMAP4+ */
+ oh = omap_hwmod_lookup("dmm");
+
+ if (oh) {
+ pdev = omap_device_build(oh->name, -1, oh, NULL, 0, NULL, 0,
+ false);
+ WARN(IS_ERR(pdev), "Could not build omap_device for %s\n",
+ oh->name);
+ }
+
+ return platform_device_register(&omap_drm_device);
+
+}
+
+arch_initcall(omap_init_drm);
+
+#endif
diff --git a/arch/arm/mach-s3c64xx/include/mach/crag6410.h b/arch/arm/mach-s3c64xx/include/mach/crag6410.h
index 4cb2f951f1e..4c3c9994fc2 100644
--- a/arch/arm/mach-s3c64xx/include/mach/crag6410.h
+++ b/arch/arm/mach-s3c64xx/include/mach/crag6410.h
@@ -13,9 +13,7 @@
#include <linux/gpio.h>
-#define BANFF_PMIC_IRQ_BASE IRQ_BOARD_START
-#define GLENFARCLAS_PMIC_IRQ_BASE (IRQ_BOARD_START + 64)
-#define CODEC_IRQ_BASE (IRQ_BOARD_START + 128)
+#define GLENFARCLAS_PMIC_IRQ_BASE IRQ_BOARD_START
#define PCA935X_GPIO_BASE GPIO_BOARD_START
#define CODEC_GPIO_BASE (GPIO_BOARD_START + 8)
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index 7a27f5603c7..9e382e7c77c 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -29,7 +29,6 @@
#include <mach/crag6410.h>
static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = {
- .set_level = gpio_set_value,
.line = S3C64XX_GPC(3),
};
@@ -39,6 +38,7 @@ static struct spi_board_info wm1253_devs[] = {
.bus_num = 0,
.chip_select = 0,
.mode = SPI_MODE_0,
+ .irq = S3C_EINT(5),
.controller_data = &wm0010_spi_csinfo,
},
};
@@ -168,7 +168,6 @@ static struct wm8994_pdata wm8994_pdata = {
.gpio_defaults = {
0x3, /* IRQ out, active high, CMOS */
},
- .irq_base = CODEC_IRQ_BASE,
.ldo = {
{ .init_data = &wm8994_ldo1, },
{ .init_data = &wm8994_ldo2, },
@@ -182,6 +181,11 @@ static const struct i2c_board_info wm1277_devs[] = {
},
};
+static const struct i2c_board_info wm5102_devs[] = {
+ { I2C_BOARD_INFO("wm5102", 0x1a),
+ .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, },
+};
+
static const struct i2c_board_info wm6230_i2c_devs[] = {
{ I2C_BOARD_INFO("wm9081", 0x6c),
.platform_data = &wm9081_pdata, },
@@ -209,6 +213,7 @@ static __devinitdata const struct {
.spi_devs = wm1253_devs, .num_spi_devs = ARRAY_SIZE(wm1253_devs) },
{ .id = 0x32, .name = "XXXX-EV1 Caol Illa" },
{ .id = 0x33, .name = "XXXX-EV1 Oban" },
+ { .id = 0x34, .name = "WM0010-6320-CS42 Balblair" },
{ .id = 0x39, .name = "1254-EV1 Dallas Dhu",
.i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) },
{ .id = 0x3a, .name = "1259-EV1 Tobermory",
@@ -218,6 +223,8 @@ static __devinitdata const struct {
{ .id = 0x3c, .name = "1273-EV1 Longmorn" },
{ .id = 0x3d, .name = "1277-EV1 Littlemill",
.i2c_devs = wm1277_devs, .num_i2c_devs = ARRAY_SIZE(wm1277_devs) },
+ { .id = 0x3e, .name = "WM5102-6271-EV1-CS127",
+ .i2c_devs = wm5102_devs, .num_i2c_devs = ARRAY_SIZE(wm5102_devs) },
};
static __devinit int wlf_gf_module_probe(struct i2c_client *i2c,
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 6dd4fae33a8..09cd81207a3 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -171,7 +171,7 @@ static struct fb_videomode crag6410_lcd_timing = {
};
/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
-static struct s3c_fb_platdata crag6410_lcd_pdata __initdata = {
+static struct s3c_fb_platdata crag6410_lcd_pdata __devinitdata = {
.setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
.vtiming = &crag6410_lcd_timing,
.win[0] = &crag6410_fb_win0,
@@ -181,7 +181,7 @@ static struct s3c_fb_platdata crag6410_lcd_pdata __initdata = {
/* 2x6 keypad */
-static uint32_t crag6410_keymap[] __initdata = {
+static uint32_t crag6410_keymap[] __devinitdata = {
/* KEY(row, col, keycode) */
KEY(0, 0, KEY_VOLUMEUP),
KEY(0, 1, KEY_HOME),
@@ -197,12 +197,12 @@ static uint32_t crag6410_keymap[] __initdata = {
KEY(1, 5, KEY_CAMERA),
};
-static struct matrix_keymap_data crag6410_keymap_data __initdata = {
+static struct matrix_keymap_data crag6410_keymap_data __devinitdata = {
.keymap = crag6410_keymap,
.keymap_size = ARRAY_SIZE(crag6410_keymap),
};
-static struct samsung_keypad_platdata crag6410_keypad_data __initdata = {
+static struct samsung_keypad_platdata crag6410_keypad_data __devinitdata = {
.keymap_data = &crag6410_keymap_data,
.rows = 2,
.cols = 6,
@@ -373,11 +373,11 @@ static struct wm831x_buckv_pdata vddarm_pdata = {
.dvs_gpio = S3C64XX_GPK(0),
};
-static struct regulator_consumer_supply vddarm_consumers[] __initdata = {
+static struct regulator_consumer_supply vddarm_consumers[] __devinitdata = {
REGULATOR_SUPPLY("vddarm", NULL),
};
-static struct regulator_init_data vddarm __initdata = {
+static struct regulator_init_data vddarm __devinitdata = {
.constraints = {
.name = "VDDARM",
.min_uV = 1000000,
@@ -391,11 +391,11 @@ static struct regulator_init_data vddarm __initdata = {
.driver_data = &vddarm_pdata,
};
-static struct regulator_consumer_supply vddint_consumers[] __initdata = {
+static struct regulator_consumer_supply vddint_consumers[] __devinitdata = {
REGULATOR_SUPPLY("vddint", NULL),
};
-static struct regulator_init_data vddint __initdata = {
+static struct regulator_init_data vddint __devinitdata = {
.constraints = {
.name = "VDDINT",
.min_uV = 1000000,
@@ -408,27 +408,27 @@ static struct regulator_init_data vddint __initdata = {
.supply_regulator = "WALLVDD",
};
-static struct regulator_init_data vddmem __initdata = {
+static struct regulator_init_data vddmem __devinitdata = {
.constraints = {
.name = "VDDMEM",
.always_on = 1,
},
};
-static struct regulator_init_data vddsys __initdata = {
+static struct regulator_init_data vddsys __devinitdata = {
.constraints = {
.name = "VDDSYS,VDDEXT,VDDPCM,VDDSS",
.always_on = 1,
},
};
-static struct regulator_consumer_supply vddmmc_consumers[] __initdata = {
+static struct regulator_consumer_supply vddmmc_consumers[] __devinitdata = {
REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
REGULATOR_SUPPLY("vmmc", "s3c-sdhci.1"),
REGULATOR_SUPPLY("vmmc", "s3c-sdhci.2"),
};
-static struct regulator_init_data vddmmc __initdata = {
+static struct regulator_init_data vddmmc __devinitdata = {
.constraints = {
.name = "VDDMMC,UH",
.always_on = 1,
@@ -438,7 +438,7 @@ static struct regulator_init_data vddmmc __initdata = {
.supply_regulator = "WALLVDD",
};
-static struct regulator_init_data vddotgi __initdata = {
+static struct regulator_init_data vddotgi __devinitdata = {
.constraints = {
.name = "VDDOTGi",
.always_on = 1,
@@ -446,7 +446,7 @@ static struct regulator_init_data vddotgi __initdata = {
.supply_regulator = "WALLVDD",
};
-static struct regulator_init_data vddotg __initdata = {
+static struct regulator_init_data vddotg __devinitdata = {
.constraints = {
.name = "VDDOTG",
.always_on = 1,
@@ -454,7 +454,7 @@ static struct regulator_init_data vddotg __initdata = {
.supply_regulator = "WALLVDD",
};
-static struct regulator_init_data vddhi __initdata = {
+static struct regulator_init_data vddhi __devinitdata = {
.constraints = {
.name = "VDDHI",
.always_on = 1,
@@ -462,7 +462,7 @@ static struct regulator_init_data vddhi __initdata = {
.supply_regulator = "WALLVDD",
};
-static struct regulator_init_data vddadc __initdata = {
+static struct regulator_init_data vddadc __devinitdata = {
.constraints = {
.name = "VDDADC,VDDDAC",
.always_on = 1,
@@ -470,7 +470,7 @@ static struct regulator_init_data vddadc __initdata = {
.supply_regulator = "WALLVDD",
};
-static struct regulator_init_data vddmem0 __initdata = {
+static struct regulator_init_data vddmem0 __devinitdata = {
.constraints = {
.name = "VDDMEM0",
.always_on = 1,
@@ -478,7 +478,7 @@ static struct regulator_init_data vddmem0 __initdata = {
.supply_regulator = "WALLVDD",
};
-static struct regulator_init_data vddpll __initdata = {
+static struct regulator_init_data vddpll __devinitdata = {
.constraints = {
.name = "VDDPLL",
.always_on = 1,
@@ -486,7 +486,7 @@ static struct regulator_init_data vddpll __initdata = {
.supply_regulator = "WALLVDD",
};
-static struct regulator_init_data vddlcd __initdata = {
+static struct regulator_init_data vddlcd __devinitdata = {
.constraints = {
.name = "VDDLCD",
.always_on = 1,
@@ -494,7 +494,7 @@ static struct regulator_init_data vddlcd __initdata = {
.supply_regulator = "WALLVDD",
};
-static struct regulator_init_data vddalive __initdata = {
+static struct regulator_init_data vddalive __devinitdata = {
.constraints = {
.name = "VDDALIVE",
.always_on = 1,
@@ -502,30 +502,29 @@ static struct regulator_init_data vddalive __initdata = {
.supply_regulator = "WALLVDD",
};
-static struct wm831x_backup_pdata banff_backup_pdata __initdata = {
+static struct wm831x_backup_pdata banff_backup_pdata __devinitdata = {
.charger_enable = 1,
.vlim = 2500, /* mV */
.ilim = 200, /* uA */
};
-static struct wm831x_status_pdata banff_red_led __initdata = {
+static struct wm831x_status_pdata banff_red_led __devinitdata = {
.name = "banff:red:",
.default_src = WM831X_STATUS_MANUAL,
};
-static struct wm831x_status_pdata banff_green_led __initdata = {
+static struct wm831x_status_pdata banff_green_led __devinitdata = {
.name = "banff:green:",
.default_src = WM831X_STATUS_MANUAL,
};
-static struct wm831x_touch_pdata touch_pdata __initdata = {
+static struct wm831x_touch_pdata touch_pdata __devinitdata = {
.data_irq = S3C_EINT(26),
.pd_irq = S3C_EINT(27),
};
-static struct wm831x_pdata crag_pmic_pdata __initdata = {
+static struct wm831x_pdata crag_pmic_pdata __devinitdata = {
.wm831x_num = 1,
- .irq_base = BANFF_PMIC_IRQ_BASE,
.gpio_base = BANFF_PMIC_GPIO_BASE,
.soft_shutdown = true,
@@ -568,7 +567,7 @@ static struct wm831x_pdata crag_pmic_pdata __initdata = {
.touch = &touch_pdata,
};
-static struct i2c_board_info i2c_devs0[] __initdata = {
+static struct i2c_board_info i2c_devs0[] __devinitdata = {
{ I2C_BOARD_INFO("24c08", 0x50), },
{ I2C_BOARD_INFO("tca6408", 0x20),
.platform_data = &crag6410_pca_data,
@@ -583,12 +582,12 @@ static struct s3c2410_platform_i2c i2c0_pdata = {
.frequency = 400000,
};
-static struct regulator_consumer_supply pvdd_1v2_consumers[] __initdata = {
+static struct regulator_consumer_supply pvdd_1v2_consumers[] __devinitdata = {
REGULATOR_SUPPLY("DCVDD", "spi0.0"),
REGULATOR_SUPPLY("AVDD", "spi0.0"),
};
-static struct regulator_init_data pvdd_1v2 __initdata = {
+static struct regulator_init_data pvdd_1v2 __devinitdata = {
.constraints = {
.name = "PVDD_1V2",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
@@ -598,7 +597,7 @@ static struct regulator_init_data pvdd_1v2 __initdata = {
.num_consumer_supplies = ARRAY_SIZE(pvdd_1v2_consumers),
};
-static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = {
+static struct regulator_consumer_supply pvdd_1v8_consumers[] __devinitdata = {
REGULATOR_SUPPLY("LDOVDD", "1-001a"),
REGULATOR_SUPPLY("PLLVDD", "1-001a"),
REGULATOR_SUPPLY("DBVDD", "1-001a"),
@@ -612,7 +611,7 @@ static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = {
REGULATOR_SUPPLY("DBVDD", "spi0.0"),
};
-static struct regulator_init_data pvdd_1v8 __initdata = {
+static struct regulator_init_data pvdd_1v8 __devinitdata = {
.constraints = {
.name = "PVDD_1V8",
.always_on = 1,
@@ -622,12 +621,12 @@ static struct regulator_init_data pvdd_1v8 __initdata = {
.num_consumer_supplies = ARRAY_SIZE(pvdd_1v8_consumers),
};
-static struct regulator_consumer_supply pvdd_3v3_consumers[] __initdata = {
+static struct regulator_consumer_supply pvdd_3v3_consumers[] __devinitdata = {
REGULATOR_SUPPLY("MICVDD", "1-001a"),
REGULATOR_SUPPLY("AVDD1", "1-001a"),
};
-static struct regulator_init_data pvdd_3v3 __initdata = {
+static struct regulator_init_data pvdd_3v3 __devinitdata = {
.constraints = {
.name = "PVDD_3V3",
.always_on = 1,
@@ -637,7 +636,7 @@ static struct regulator_init_data pvdd_3v3 __initdata = {
.num_consumer_supplies = ARRAY_SIZE(pvdd_3v3_consumers),
};
-static struct wm831x_pdata glenfarclas_pmic_pdata __initdata = {
+static struct wm831x_pdata glenfarclas_pmic_pdata __devinitdata = {
.wm831x_num = 2,
.irq_base = GLENFARCLAS_PMIC_IRQ_BASE,
.gpio_base = GLENFARCLAS_PMIC_GPIO_BASE,
@@ -669,7 +668,7 @@ static struct wm1250_ev1_pdata wm1250_ev1_pdata = {
},
};
-static struct i2c_board_info i2c_devs1[] __initdata = {
+static struct i2c_board_info i2c_devs1[] __devinitdata = {
{ I2C_BOARD_INFO("wm8311", 0x34),
.irq = S3C_EINT(0),
.platform_data = &glenfarclas_pmic_pdata },
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index df3103d450e..0fe4f1503f4 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -566,7 +566,6 @@ static struct wm831x_status_pdata wm1192_led8_pdata = {
static struct wm831x_pdata smdk6410_wm1192_pdata = {
.pre_init = wm1192_pre_init,
- .irq_base = IRQ_BOARD_START,
.backlight = &wm1192_backlight_pdata,
.dcdc = {
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 88e983b0c82..77185c38188 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -152,6 +152,7 @@ config MACH_SMDKV210
select S3C_DEV_I2C1
select S3C_DEV_I2C2
select S3C_DEV_RTC
+ select S3C_DEV_USB_HSOTG
select S3C_DEV_WDT
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
@@ -170,6 +171,7 @@ config MACH_SMDKV210
select S5PV210_SETUP_IDE
select S5PV210_SETUP_KEYPAD
select S5PV210_SETUP_SDHCI
+ select S5PV210_SETUP_USB_PHY
help
Machine support for Samsung SMDKV210
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index af528f9e97f..78028df86c5 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -600,10 +600,17 @@ static void aquila_setup_sdhci(void)
s3c_sdhci2_set_platdata(&aquila_hsmmc2_data);
};
+/* Audio device */
+static struct platform_device aquila_device_audio = {
+ .name = "smdk-audio",
+ .id = -1,
+};
+
static struct platform_device *aquila_devices[] __initdata = {
&aquila_i2c_gpio_pmic,
&aquila_i2c_gpio5,
&aquila_device_gpiokeys,
+ &aquila_device_audio,
&s3c_device_fb,
&s5p_device_onenand,
&s3c_device_hsmmc0,
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index bf5087c2b7f..822a5595068 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -859,12 +859,19 @@ static struct s5p_platform_fimc goni_fimc_md_platdata __initdata = {
.num_clients = ARRAY_SIZE(goni_camera_sensors),
};
+/* Audio device */
+static struct platform_device goni_device_audio = {
+ .name = "smdk-audio",
+ .id = -1,
+};
+
static struct platform_device *goni_devices[] __initdata = {
&s3c_device_fb,
&s5p_device_onenand,
&goni_spi_gpio,
&goni_i2c_gpio_pmic,
&goni_i2c_gpio5,
+ &goni_device_audio,
&mmc2_fixed_voltage,
&goni_device_gpiokeys,
&s5p_device_mfc,
@@ -901,7 +908,7 @@ static void __init goni_sound_init(void)
static void __init goni_map_io(void)
{
s5pv210_init_io(NULL, 0);
- s3c24xx_init_clocks(24000000);
+ s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(goni_uartcfgs, ARRAY_SIZE(goni_uartcfgs));
s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
}
@@ -959,8 +966,6 @@ static void __init goni_machine_init(void)
/* KEYPAD */
samsung_keypad_set_platdata(&keypad_data);
- clk_xusbxti.rate = 24000000;
-
platform_add_devices(goni_devices, ARRAY_SIZE(goni_devices));
}
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index 0d7ddec88eb..918b23d71fd 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -19,6 +19,7 @@
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/pwm_backlight.h>
+#include <linux/platform_data/s3c-hsotg.h>
#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
@@ -47,6 +48,7 @@
#include <plat/backlight.h>
#include <plat/regs-fb-v4.h>
#include <plat/mfc.h>
+#include <plat/clock.h>
#include "common.h"
@@ -203,6 +205,9 @@ static struct s3c_fb_platdata smdkv210_lcd0_pdata __initdata = {
.setup_gpio = s5pv210_fb_gpio_setup_24bpp,
};
+/* USB OTG */
+static struct s3c_hsotg_plat smdkv210_hsotg_pdata;
+
static struct platform_device *smdkv210_devices[] __initdata = {
&s3c_device_adc,
&s3c_device_cfcon,
@@ -216,6 +221,7 @@ static struct platform_device *smdkv210_devices[] __initdata = {
&s3c_device_i2c2,
&s3c_device_rtc,
&s3c_device_ts,
+ &s3c_device_usb_hsotg,
&s3c_device_wdt,
&s5p_device_fimc0,
&s5p_device_fimc1,
@@ -279,7 +285,7 @@ static struct platform_pwm_backlight_data smdkv210_bl_data = {
static void __init smdkv210_map_io(void)
{
s5pv210_init_io(NULL, 0);
- s3c24xx_init_clocks(24000000);
+ s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
s5p_set_timer_source(S5P_PWM2, S5P_PWM4);
}
@@ -314,6 +320,8 @@ static void __init smdkv210_machine_init(void)
samsung_bl_set(&smdkv210_bl_gpio_info, &smdkv210_bl_data);
+ s3c_hsotg_set_platdata(&smdkv210_hsotg_pdata);
+
platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
}
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index 7c407393cd0..9077aaa398d 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -66,34 +66,12 @@ config MACH_HARMONY
help
Support for nVidia Harmony development platform
-config MACH_KAEN
- bool "Kaen board"
- depends on ARCH_TEGRA_2x_SOC
- select MACH_SEABOARD
- help
- Support for the Kaen version of Seaboard
-
config MACH_PAZ00
bool "Paz00 board"
depends on ARCH_TEGRA_2x_SOC
help
Support for the Toshiba AC100/Dynabook AZ netbook
-config MACH_SEABOARD
- bool "Seaboard board"
- depends on ARCH_TEGRA_2x_SOC
- help
- Support for nVidia Seaboard development platform. It will
- also be included for some of the derivative boards that
- have large similarities with the seaboard design.
-
-config MACH_TEGRA_DT
- bool "Generic Tegra20 board (FDT support)"
- depends on ARCH_TEGRA_2x_SOC
- select USE_OF
- help
- Support for generic NVIDIA Tegra20 boards using Flattened Device Tree
-
config MACH_TRIMSLICE
bool "TrimSlice board"
depends on ARCH_TEGRA_2x_SOC
@@ -101,20 +79,6 @@ config MACH_TRIMSLICE
help
Support for CompuLab TrimSlice platform
-config MACH_WARIO
- bool "Wario board"
- depends on ARCH_TEGRA_2x_SOC
- select MACH_SEABOARD
- help
- Support for the Wario version of Seaboard
-
-config MACH_VENTANA
- bool "Ventana board"
- depends on ARCH_TEGRA_2x_SOC
- select MACH_TEGRA_DT
- help
- Support for the nVidia Ventana development platform
-
choice
prompt "Default low-level debug console UART"
default TEGRA_DEBUG_UART_NONE
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index 90aae34245c..c3d7303b9ac 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -14,7 +14,6 @@ obj-$(CONFIG_CPU_IDLE) += cpuidle.o
obj-$(CONFIG_CPU_IDLE) += sleep.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_clocks.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_emc.o
-obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += board-dt-tegra30.o
obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_clocks.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_SMP) += reset.o
@@ -24,6 +23,9 @@ obj-$(CONFIG_CPU_FREQ) += cpu-tegra.o
obj-$(CONFIG_TEGRA_PCI) += pcie.o
obj-$(CONFIG_USB_SUPPORT) += usb_phy.o
+obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += board-dt-tegra20.o
+obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += board-dt-tegra30.o
+
obj-$(CONFIG_MACH_HARMONY) += board-harmony.o
obj-$(CONFIG_MACH_HARMONY) += board-harmony-pinmux.o
obj-$(CONFIG_MACH_HARMONY) += board-harmony-pcie.o
@@ -32,14 +34,5 @@ obj-$(CONFIG_MACH_HARMONY) += board-harmony-power.o
obj-$(CONFIG_MACH_PAZ00) += board-paz00.o
obj-$(CONFIG_MACH_PAZ00) += board-paz00-pinmux.o
-obj-$(CONFIG_MACH_SEABOARD) += board-seaboard.o
-obj-$(CONFIG_MACH_SEABOARD) += board-seaboard-pinmux.o
-
-obj-$(CONFIG_MACH_TEGRA_DT) += board-dt-tegra20.o
-obj-$(CONFIG_MACH_TEGRA_DT) += board-harmony-pinmux.o
-obj-$(CONFIG_MACH_TEGRA_DT) += board-seaboard-pinmux.o
-obj-$(CONFIG_MACH_TEGRA_DT) += board-paz00-pinmux.o
-obj-$(CONFIG_MACH_TEGRA_DT) += board-trimslice-pinmux.o
-
obj-$(CONFIG_MACH_TRIMSLICE) += board-trimslice.o
obj-$(CONFIG_MACH_TRIMSLICE) += board-trimslice-pinmux.o
diff --git a/arch/arm/mach-tegra/Makefile.boot b/arch/arm/mach-tegra/Makefile.boot
index 435f00ca3c5..7a1bb62ddcf 100644
--- a/arch/arm/mach-tegra/Makefile.boot
+++ b/arch/arm/mach-tegra/Makefile.boot
@@ -2,10 +2,10 @@ zreladdr-$(CONFIG_ARCH_TEGRA_2x_SOC) += 0x00008000
params_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00000100
initrd_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00800000
-dtb-$(CONFIG_MACH_HARMONY) += tegra20-harmony.dtb
-dtb-$(CONFIG_MACH_PAZ00) += tegra20-paz00.dtb
-dtb-$(CONFIG_MACH_SEABOARD) += tegra20-seaboard.dtb
-dtb-$(CONFIG_MACH_TRIMSLICE) += tegra20-trimslice.dtb
-dtb-$(CONFIG_MACH_VENTANA) += tegra20-ventana.dtb
+dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-harmony.dtb
+dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-paz00.dtb
+dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-seaboard.dtb
+dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-trimslice.dtb
+dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-ventana.dtb
dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-whistler.dtb
dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu.dtb
diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c
index eb7249db50a..d0de9c1192f 100644
--- a/arch/arm/mach-tegra/board-dt-tegra20.c
+++ b/arch/arm/mach-tegra/board-dt-tegra20.c
@@ -64,6 +64,7 @@ struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = {
&tegra_ehci2_pdata),
OF_DEV_AUXDATA("nvidia,tegra20-ehci", TEGRA_USB3_BASE, "tegra-ehci.2",
&tegra_ehci3_pdata),
+ OF_DEV_AUXDATA("nvidia,tegra20-apbdma", 0x6000a000, "tegra-apbdma", NULL),
{}
};
@@ -81,11 +82,6 @@ static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = {
{ NULL, NULL, 0, 0},
};
-static struct of_device_id tegra_dt_match_table[] __initdata = {
- { .compatible = "simple-bus", },
- {}
-};
-
static void __init tegra_dt_init(void)
{
tegra_clk_init_from_table(tegra_dt_clk_init_table);
@@ -94,10 +90,74 @@ static void __init tegra_dt_init(void)
* Finished with the static registrations now; fill in the missing
* devices
*/
- of_platform_populate(NULL, tegra_dt_match_table,
+ of_platform_populate(NULL, of_default_bus_match_table,
tegra20_auxdata_lookup, NULL);
}
+#ifdef CONFIG_MACH_TRIMSLICE
+static void __init trimslice_init(void)
+{
+ int ret;
+
+ ret = tegra_pcie_init(true, true);
+ if (ret)
+ pr_err("tegra_pci_init() failed: %d\n", ret);
+}
+#endif
+
+#ifdef CONFIG_MACH_HARMONY
+static void __init harmony_init(void)
+{
+ int ret;
+
+ ret = harmony_regulator_init();
+ if (ret) {
+ pr_err("harmony_regulator_init() failed: %d\n", ret);
+ return;
+ }
+
+ ret = harmony_pcie_init();
+ if (ret)
+ pr_err("harmony_pcie_init() failed: %d\n", ret);
+}
+#endif
+
+#ifdef CONFIG_MACH_PAZ00
+static void __init paz00_init(void)
+{
+ tegra_paz00_wifikill_init();
+}
+#endif
+
+static struct {
+ char *machine;
+ void (*init)(void);
+} board_init_funcs[] = {
+#ifdef CONFIG_MACH_TRIMSLICE
+ { "compulab,trimslice", trimslice_init },
+#endif
+#ifdef CONFIG_MACH_HARMONY
+ { "nvidia,harmony", harmony_init },
+#endif
+#ifdef CONFIG_MACH_PAZ00
+ { "compal,paz00", paz00_init },
+#endif
+};
+
+static void __init tegra_dt_init_late(void)
+{
+ int i;
+
+ tegra_init_late();
+
+ for (i = 0; i < ARRAY_SIZE(board_init_funcs); i++) {
+ if (of_machine_is_compatible(board_init_funcs[i].machine)) {
+ board_init_funcs[i].init();
+ break;
+ }
+ }
+}
+
static const char *tegra20_dt_board_compat[] = {
"nvidia,tegra20",
NULL
@@ -110,7 +170,7 @@ DT_MACHINE_START(TEGRA_DT, "nVidia Tegra20 (Flattened Device Tree)")
.handle_irq = gic_handle_irq,
.timer = &tegra_timer,
.init_machine = tegra_dt_init,
- .init_late = tegra_init_late,
+ .init_late = tegra_dt_init_late,
.restart = tegra_assert_system_reset,
.dt_compat = tegra20_dt_board_compat,
MACHINE_END
diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c
index 4f76fa7a5da..ee48214bfd8 100644
--- a/arch/arm/mach-tegra/board-dt-tegra30.c
+++ b/arch/arm/mach-tegra/board-dt-tegra30.c
@@ -36,11 +36,6 @@
#include "board.h"
#include "clock.h"
-static struct of_device_id tegra_dt_match_table[] __initdata = {
- { .compatible = "simple-bus", },
- {}
-};
-
struct of_dev_auxdata tegra30_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000000, "sdhci-tegra.0", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000200, "sdhci-tegra.1", NULL),
@@ -52,6 +47,7 @@ struct of_dev_auxdata tegra30_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000C700, "tegra-i2c.3", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000D000, "tegra-i2c.4", NULL),
OF_DEV_AUXDATA("nvidia,tegra30-ahub", 0x70080000, "tegra30-ahub", NULL),
+ OF_DEV_AUXDATA("nvidia,tegra30-apbdma", 0x6000a000, "tegra-apbdma", NULL),
{}
};
@@ -74,7 +70,7 @@ static void __init tegra30_dt_init(void)
{
tegra_clk_init_from_table(tegra_dt_clk_init_table);
- of_platform_populate(NULL, tegra_dt_match_table,
+ of_platform_populate(NULL, of_default_bus_match_table,
tegra30_auxdata_lookup, NULL);
}
diff --git a/arch/arm/mach-tegra/board-harmony-pcie.c b/arch/arm/mach-tegra/board-harmony-pcie.c
index 33c4fedab84..e8c3fda9bec 100644
--- a/arch/arm/mach-tegra/board-harmony-pcie.c
+++ b/arch/arm/mach-tegra/board-harmony-pcie.c
@@ -27,14 +27,11 @@
#ifdef CONFIG_TEGRA_PCI
-static int __init harmony_pcie_init(void)
+int __init harmony_pcie_init(void)
{
struct regulator *regulator = NULL;
int err;
- if (!machine_is_harmony())
- return 0;
-
err = gpio_request(TEGRA_GPIO_EN_VDD_1V05_GPIO, "EN_VDD_1V05");
if (err)
return err;
@@ -62,7 +59,15 @@ err_reg:
return err;
}
+static int __init harmony_pcie_initcall(void)
+{
+ if (!machine_is_harmony())
+ return 0;
+
+ return harmony_pcie_init();
+}
+
/* PCI should be initialized after I2C, mfd and regulators */
-subsys_initcall_sync(harmony_pcie_init);
+subsys_initcall_sync(harmony_pcie_initcall);
#endif
diff --git a/arch/arm/mach-tegra/board-harmony-power.c b/arch/arm/mach-tegra/board-harmony-power.c
index 82f32300796..44dcb2e869b 100644
--- a/arch/arm/mach-tegra/board-harmony-power.c
+++ b/arch/arm/mach-tegra/board-harmony-power.c
@@ -20,6 +20,10 @@
#include <linux/gpio.h>
#include <linux/regulator/machine.h>
#include <linux/mfd/tps6586x.h>
+#include <linux/of.h>
+#include <linux/of_i2c.h>
+
+#include <asm/mach-types.h>
#include <mach/irqs.h>
@@ -110,7 +114,26 @@ static struct i2c_board_info __initdata harmony_regulators[] = {
int __init harmony_regulator_init(void)
{
- i2c_register_board_info(3, harmony_regulators, 1);
+ if (machine_is_harmony()) {
+ i2c_register_board_info(3, harmony_regulators, 1);
+ } else { /* Harmony, booted using device tree */
+ struct device_node *np;
+ struct i2c_adapter *adapter;
+
+ np = of_find_node_by_path("/i2c@7000d000");
+ if (np == NULL) {
+ pr_err("Could not find device_node for DVC I2C\n");
+ return -ENODEV;
+ }
+
+ adapter = of_find_i2c_adapter_by_node(np);
+ if (!adapter) {
+ pr_err("Could not find i2c_adapter for DVC I2C\n");
+ return -ENODEV;
+ }
+
+ i2c_new_device(adapter, harmony_regulators);
+ }
return 0;
}
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index bbc1907e98a..4b64af5cab2 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -148,7 +148,6 @@ static struct platform_device *paz00_devices[] __initdata = {
&debug_uart,
&tegra_sdhci_device4,
&tegra_sdhci_device1,
- &wifi_rfkill_device,
&leds_gpio,
&gpio_keys_device,
};
@@ -201,6 +200,11 @@ static struct tegra_sdhci_platform_data sdhci_pdata4 = {
.is_8bit = 1,
};
+void __init tegra_paz00_wifikill_init(void)
+{
+ platform_device_register(&wifi_rfkill_device);
+}
+
static void __init tegra_paz00_init(void)
{
tegra_clk_init_from_table(paz00_clk_init_table);
@@ -211,6 +215,7 @@ static void __init tegra_paz00_init(void)
tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4;
platform_add_devices(paz00_devices, ARRAY_SIZE(paz00_devices));
+ tegra_paz00_wifikill_init();
paz00_i2c_init();
paz00_usb_init();
diff --git a/arch/arm/mach-tegra/board-seaboard-pinmux.c b/arch/arm/mach-tegra/board-seaboard-pinmux.c
deleted file mode 100644
index 11fc8a568c6..00000000000
--- a/arch/arm/mach-tegra/board-seaboard-pinmux.c
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * Copyright (C) 2010-2012 NVIDIA Corporation
- * Copyright (C) 2011 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-
-#include "board-seaboard.h"
-#include "board-pinmux.h"
-
-static unsigned long seaboard_pincfg_drive_sdio1[] = {
- TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_HIGH_SPEED_MODE, 0),
- TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_SCHMITT, 0),
- TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_LOW_POWER_MODE, 3),
- TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_DRIVE_DOWN_STRENGTH, 31),
- TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_DRIVE_UP_STRENGTH, 31),
- TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_SLEW_RATE_FALLING, 3),
- TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_SLEW_RATE_RISING, 3),
-};
-
-static struct pinctrl_map common_map[] = {
- TEGRA_MAP_MUXCONF("ata", "ide", none, driven),
- TEGRA_MAP_MUXCONF("atb", "sdio4", none, driven),
- TEGRA_MAP_MUXCONF("atc", "nand", none, driven),
- TEGRA_MAP_MUXCONF("atd", "gmi", none, driven),
- TEGRA_MAP_MUXCONF("ate", "gmi", none, tristate),
- TEGRA_MAP_MUXCONF("cdev1", "plla_out", none, driven),
- TEGRA_MAP_MUXCONF("cdev2", "pllp_out4", none, driven),
- TEGRA_MAP_MUXCONF("crtp", "crt", up, tristate),
- TEGRA_MAP_MUXCONF("csus", "vi_sensor_clk", none, tristate),
- TEGRA_MAP_MUXCONF("dap1", "dap1", none, driven),
- TEGRA_MAP_MUXCONF("dap2", "dap2", none, driven),
- TEGRA_MAP_MUXCONF("dap3", "dap3", none, tristate),
- TEGRA_MAP_MUXCONF("dap4", "dap4", none, driven),
- TEGRA_MAP_MUXCONF("dta", "vi", down, driven),
- TEGRA_MAP_MUXCONF("dtb", "vi", down, driven),
- TEGRA_MAP_MUXCONF("dtc", "vi", down, driven),
- TEGRA_MAP_MUXCONF("dtd", "vi", down, driven),
- TEGRA_MAP_MUXCONF("dte", "vi", down, tristate),
- TEGRA_MAP_MUXCONF("dtf", "i2c3", none, driven),
- TEGRA_MAP_MUXCONF("gma", "sdio4", none, driven),
- TEGRA_MAP_MUXCONF("gmb", "gmi", up, tristate),
- TEGRA_MAP_MUXCONF("gmc", "uartd", none, driven),
- TEGRA_MAP_MUXCONF("gme", "sdio4", none, driven),
- TEGRA_MAP_MUXCONF("gpu", "pwm", none, driven),
- TEGRA_MAP_MUXCONF("gpu7", "rtck", none, driven),
- TEGRA_MAP_MUXCONF("gpv", "pcie", none, tristate),
- TEGRA_MAP_MUXCONF("hdint", "hdmi", na, tristate),
- TEGRA_MAP_MUXCONF("i2cp", "i2cp", none, driven),
- TEGRA_MAP_MUXCONF("irrx", "uartb", none, driven),
- TEGRA_MAP_MUXCONF("irtx", "uartb", none, driven),
- TEGRA_MAP_MUXCONF("kbca", "kbc", up, driven),
- TEGRA_MAP_MUXCONF("kbcb", "kbc", up, driven),
- TEGRA_MAP_MUXCONF("kbcc", "kbc", up, driven),
- TEGRA_MAP_MUXCONF("kbcd", "kbc", up, driven),
- TEGRA_MAP_MUXCONF("kbce", "kbc", up, driven),
- TEGRA_MAP_MUXCONF("kbcf", "kbc", up, driven),
- TEGRA_MAP_MUXCONF("lcsn", "rsvd4", na, tristate),
- TEGRA_MAP_MUXCONF("ld0", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld1", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld10", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld11", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld12", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld13", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld14", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld15", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld16", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld17", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld2", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld3", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld4", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld5", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld6", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld7", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld8", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ld9", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("ldc", "rsvd4", na, tristate),
- TEGRA_MAP_MUXCONF("ldi", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lhp0", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lhp1", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lhp2", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lhs", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lm0", "rsvd4", na, driven),
- TEGRA_MAP_MUXCONF("lm1", "crt", na, tristate),
- TEGRA_MAP_MUXCONF("lpp", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lpw1", "rsvd4", na, tristate),
- TEGRA_MAP_MUXCONF("lsc0", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lsdi", "rsvd4", na, tristate),
- TEGRA_MAP_MUXCONF("lspi", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lvp0", "rsvd4", na, tristate),
- TEGRA_MAP_MUXCONF("lvp1", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lvs", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("owc", "rsvd2", none, tristate),
- TEGRA_MAP_MUXCONF("pmc", "pwr_on", na, driven),
- TEGRA_MAP_MUXCONF("pta", "hdmi", none, driven),
- TEGRA_MAP_MUXCONF("rm", "i2c1", none, driven),
- TEGRA_MAP_MUXCONF("sdb", "sdio3", na, driven),
- TEGRA_MAP_MUXCONF("sdc", "sdio3", none, driven),
- TEGRA_MAP_MUXCONF("sdd", "sdio3", none, driven),
- TEGRA_MAP_MUXCONF("sdio1", "sdio1", up, driven),
- TEGRA_MAP_MUXCONF("slxa", "pcie", up, tristate),
- TEGRA_MAP_MUXCONF("slxd", "spdif", none, driven),
- TEGRA_MAP_MUXCONF("slxk", "pcie", none, driven),
- TEGRA_MAP_MUXCONF("spdi", "rsvd2", none, driven),
- TEGRA_MAP_MUXCONF("spdo", "rsvd2", none, driven),
- TEGRA_MAP_MUXCONF("spib", "gmi", none, tristate),
- TEGRA_MAP_MUXCONF("spid", "spi1", none, tristate),
- TEGRA_MAP_MUXCONF("spie", "spi1", none, tristate),
- TEGRA_MAP_MUXCONF("spif", "spi1", down, tristate),
- TEGRA_MAP_MUXCONF("spih", "spi2_alt", up, tristate),
- TEGRA_MAP_MUXCONF("uaa", "ulpi", up, driven),
- TEGRA_MAP_MUXCONF("uab", "ulpi", up, driven),
- TEGRA_MAP_MUXCONF("uac", "rsvd2", none, driven),
- TEGRA_MAP_MUXCONF("uad", "irda", none, driven),
- TEGRA_MAP_MUXCONF("uca", "uartc", none, driven),
- TEGRA_MAP_MUXCONF("ucb", "uartc", none, driven),
- TEGRA_MAP_MUXCONF("uda", "ulpi", none, driven),
- TEGRA_MAP_CONF("ck32", none, na),
- TEGRA_MAP_CONF("ddrc", none, na),
- TEGRA_MAP_CONF("pmca", none, na),
- TEGRA_MAP_CONF("pmcb", none, na),
- TEGRA_MAP_CONF("pmcc", none, na),
- TEGRA_MAP_CONF("pmcd", none, na),
- TEGRA_MAP_CONF("pmce", none, na),
- TEGRA_MAP_CONF("xm2c", none, na),
- TEGRA_MAP_CONF("xm2d", none, na),
- TEGRA_MAP_CONF("ls", up, na),
- TEGRA_MAP_CONF("lc", up, na),
- TEGRA_MAP_CONF("ld17_0", down, na),
- TEGRA_MAP_CONF("ld19_18", down, na),
- TEGRA_MAP_CONF("ld21_20", down, na),
- TEGRA_MAP_CONF("ld23_22", down, na),
-};
-
-static struct pinctrl_map seaboard_map[] = {
- TEGRA_MAP_MUXCONF("ddc", "rsvd2", none, tristate),
- TEGRA_MAP_MUXCONF("gmd", "sflash", none, driven),
- TEGRA_MAP_MUXCONF("lpw0", "hdmi", na, driven),
- TEGRA_MAP_MUXCONF("lpw2", "hdmi", na, driven),
- TEGRA_MAP_MUXCONF("lsc1", "hdmi", na, tristate),
- TEGRA_MAP_MUXCONF("lsck", "hdmi", na, tristate),
- TEGRA_MAP_MUXCONF("lsda", "hdmi", na, tristate),
- TEGRA_MAP_MUXCONF("slxc", "spdif", none, tristate),
- TEGRA_MAP_MUXCONF("spia", "gmi", up, tristate),
- TEGRA_MAP_MUXCONF("spic", "gmi", up, driven),
- TEGRA_MAP_MUXCONF("spig", "spi2_alt", up, tristate),
- PIN_MAP_CONFIGS_GROUP_HOG_DEFAULT(PINMUX_DEV, "drive_sdio1", seaboard_pincfg_drive_sdio1),
-};
-
-static struct pinctrl_map ventana_map[] = {
- TEGRA_MAP_MUXCONF("ddc", "rsvd2", none, driven),
- TEGRA_MAP_MUXCONF("gmd", "sflash", none, tristate),
- TEGRA_MAP_MUXCONF("lpw0", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lpw2", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lsc1", "displaya", na, driven),
- TEGRA_MAP_MUXCONF("lsck", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("lsda", "displaya", na, tristate),
- TEGRA_MAP_MUXCONF("slxc", "sdio3", none, driven),
- TEGRA_MAP_MUXCONF("spia", "gmi", none, tristate),
- TEGRA_MAP_MUXCONF("spic", "gmi", none, tristate),
- TEGRA_MAP_MUXCONF("spig", "spi2_alt", none, tristate),
-};
-
-static struct tegra_board_pinmux_conf common_conf = {
- .maps = common_map,
- .map_count = ARRAY_SIZE(common_map),
-};
-
-static struct tegra_board_pinmux_conf seaboard_conf = {
- .maps = seaboard_map,
- .map_count = ARRAY_SIZE(seaboard_map),
-};
-
-static struct tegra_board_pinmux_conf ventana_conf = {
- .maps = ventana_map,
- .map_count = ARRAY_SIZE(ventana_map),
-};
-
-void seaboard_pinmux_init(void)
-{
- tegra_board_pinmux_init(&common_conf, &seaboard_conf);
-}
-
-void ventana_pinmux_init(void)
-{
- tegra_board_pinmux_init(&common_conf, &ventana_conf);
-}
diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c
deleted file mode 100644
index 71e9f3fc7fb..00000000000
--- a/arch/arm/mach-tegra/board-seaboard.c
+++ /dev/null
@@ -1,306 +0,0 @@
-/*
- * Copyright (c) 2010, 2011 NVIDIA Corporation.
- * Copyright (C) 2010, 2011 Google, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/of_serial.h>
-#include <linux/i2c.h>
-#include <linux/delay.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/platform_data/tegra_usb.h>
-
-#include <sound/wm8903.h>
-
-#include <mach/iomap.h>
-#include <mach/irqs.h>
-#include <mach/sdhci.h>
-#include <mach/tegra_wm8903_pdata.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
-
-#include "board.h"
-#include "board-seaboard.h"
-#include "clock.h"
-#include "devices.h"
-#include "gpio-names.h"
-
-static struct plat_serial8250_port debug_uart_platform_data[] = {
- {
- /* Memory and IRQ filled in before registration */
- .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
- .type = PORT_TEGRA,
- .handle_break = tegra_serial_handle_break,
- .iotype = UPIO_MEM,
- .regshift = 2,
- .uartclk = 216000000,
- }, {
- .flags = 0,
- }
-};
-
-static struct platform_device debug_uart = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = debug_uart_platform_data,
- },
-};
-
-static __initdata struct tegra_clk_init_table seaboard_clk_init_table[] = {
- /* name parent rate enabled */
- { "uartb", "pll_p", 216000000, true},
- { "uartd", "pll_p", 216000000, true},
- { "pll_a", "pll_p_out1", 56448000, true },
- { "pll_a_out0", "pll_a", 11289600, true },
- { "cdev1", NULL, 0, true },
- { "i2s1", "pll_a_out0", 11289600, false},
- { "usbd", "clk_m", 12000000, true},
- { "usb3", "clk_m", 12000000, true},
- { NULL, NULL, 0, 0},
-};
-
-static struct gpio_keys_button seaboard_gpio_keys_buttons[] = {
- {
- .code = SW_LID,
- .gpio = TEGRA_GPIO_LIDSWITCH,
- .active_low = 0,
- .desc = "Lid",
- .type = EV_SW,
- .wakeup = 1,
- .debounce_interval = 1,
- },
- {
- .code = KEY_POWER,
- .gpio = TEGRA_GPIO_POWERKEY,
- .active_low = 1,
- .desc = "Power",
- .type = EV_KEY,
- .wakeup = 1,
- },
-};
-
-static struct gpio_keys_platform_data seaboard_gpio_keys = {
- .buttons = seaboard_gpio_keys_buttons,
- .nbuttons = ARRAY_SIZE(seaboard_gpio_keys_buttons),
-};
-
-static struct platform_device seaboard_gpio_keys_device = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &seaboard_gpio_keys,
- }
-};
-
-static struct tegra_sdhci_platform_data sdhci_pdata1 = {
- .cd_gpio = -1,
- .wp_gpio = -1,
- .power_gpio = -1,
-};
-
-static struct tegra_sdhci_platform_data sdhci_pdata3 = {
- .cd_gpio = TEGRA_GPIO_SD2_CD,
- .wp_gpio = TEGRA_GPIO_SD2_WP,
- .power_gpio = TEGRA_GPIO_SD2_POWER,
-};
-
-static struct tegra_sdhci_platform_data sdhci_pdata4 = {
- .cd_gpio = -1,
- .wp_gpio = -1,
- .power_gpio = -1,
- .is_8bit = 1,
-};
-
-static struct tegra_wm8903_platform_data seaboard_audio_pdata = {
- .gpio_spkr_en = TEGRA_GPIO_SPKR_EN,
- .gpio_hp_det = TEGRA_GPIO_HP_DET,
- .gpio_hp_mute = -1,
- .gpio_int_mic_en = -1,
- .gpio_ext_mic_en = -1,
-};
-
-static struct platform_device seaboard_audio_device = {
- .name = "tegra-snd-wm8903",
- .id = 0,
- .dev = {
- .platform_data = &seaboard_audio_pdata,
- },
-};
-
-static struct platform_device *seaboard_devices[] __initdata = {
- &debug_uart,
- &tegra_pmu_device,
- &tegra_sdhci_device4,
- &tegra_sdhci_device3,
- &tegra_sdhci_device1,
- &seaboard_gpio_keys_device,
- &tegra_i2s_device1,
- &tegra_das_device,
- &seaboard_audio_device,
-};
-
-static struct i2c_board_info __initdata isl29018_device = {
- I2C_BOARD_INFO("isl29018", 0x44),
-};
-
-static struct i2c_board_info __initdata adt7461_device = {
- I2C_BOARD_INFO("adt7461", 0x4c),
-};
-
-static struct wm8903_platform_data wm8903_pdata = {
- .irq_active_low = 0,
- .micdet_cfg = 0,
- .micdet_delay = 100,
- .gpio_base = SEABOARD_GPIO_WM8903(0),
- .gpio_cfg = {
- 0,
- 0,
- WM8903_GPIO_CONFIG_ZERO,
- 0,
- 0,
- },
-};
-
-static struct i2c_board_info __initdata wm8903_device = {
- I2C_BOARD_INFO("wm8903", 0x1a),
- .platform_data = &wm8903_pdata,
-};
-
-static int seaboard_ehci_init(void)
-{
- struct tegra_ehci_platform_data *pdata;
-
- pdata = tegra_ehci1_device.dev.platform_data;
- pdata->vbus_gpio = TEGRA_GPIO_USB1;
-
- platform_device_register(&tegra_ehci1_device);
- platform_device_register(&tegra_ehci3_device);
-
- return 0;
-}
-
-static void __init seaboard_i2c_init(void)
-{
- isl29018_device.irq = gpio_to_irq(TEGRA_GPIO_ISL29018_IRQ);
- i2c_register_board_info(0, &isl29018_device, 1);
-
- wm8903_device.irq = gpio_to_irq(TEGRA_GPIO_CDC_IRQ);
- i2c_register_board_info(0, &wm8903_device, 1);
-
- i2c_register_board_info(3, &adt7461_device, 1);
-
- platform_device_register(&tegra_i2c_device1);
- platform_device_register(&tegra_i2c_device2);
- platform_device_register(&tegra_i2c_device3);
- platform_device_register(&tegra_i2c_device4);
-}
-
-static void __init seaboard_common_init(void)
-{
- seaboard_pinmux_init();
-
- tegra_clk_init_from_table(seaboard_clk_init_table);
-
- tegra_sdhci_device1.dev.platform_data = &sdhci_pdata1;
- tegra_sdhci_device3.dev.platform_data = &sdhci_pdata3;
- tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4;
-
- platform_add_devices(seaboard_devices, ARRAY_SIZE(seaboard_devices));
-
- seaboard_ehci_init();
-}
-
-static void __init tegra_seaboard_init(void)
-{
- /* Seaboard uses UARTD for the debug port. */
- debug_uart_platform_data[0].membase = IO_ADDRESS(TEGRA_UARTD_BASE);
- debug_uart_platform_data[0].mapbase = TEGRA_UARTD_BASE;
- debug_uart_platform_data[0].irq = INT_UARTD;
-
- seaboard_common_init();
-
- seaboard_i2c_init();
-}
-
-static void __init tegra_kaen_init(void)
-{
- /* Kaen uses UARTB for the debug port. */
- debug_uart_platform_data[0].membase = IO_ADDRESS(TEGRA_UARTB_BASE);
- debug_uart_platform_data[0].mapbase = TEGRA_UARTB_BASE;
- debug_uart_platform_data[0].irq = INT_UARTB;
-
- seaboard_audio_pdata.gpio_hp_mute = TEGRA_GPIO_KAEN_HP_MUTE;
-
- seaboard_common_init();
-
- seaboard_i2c_init();
-}
-
-static void __init tegra_wario_init(void)
-{
- /* Wario uses UARTB for the debug port. */
- debug_uart_platform_data[0].membase = IO_ADDRESS(TEGRA_UARTB_BASE);
- debug_uart_platform_data[0].mapbase = TEGRA_UARTB_BASE;
- debug_uart_platform_data[0].irq = INT_UARTB;
-
- seaboard_common_init();
-
- seaboard_i2c_init();
-}
-
-
-MACHINE_START(SEABOARD, "seaboard")
- .atag_offset = 0x100,
- .map_io = tegra_map_common_io,
- .init_early = tegra20_init_early,
- .init_irq = tegra_init_irq,
- .handle_irq = gic_handle_irq,
- .timer = &tegra_timer,
- .init_machine = tegra_seaboard_init,
- .init_late = tegra_init_late,
- .restart = tegra_assert_system_reset,
-MACHINE_END
-
-MACHINE_START(KAEN, "kaen")
- .atag_offset = 0x100,
- .map_io = tegra_map_common_io,
- .init_early = tegra20_init_early,
- .init_irq = tegra_init_irq,
- .handle_irq = gic_handle_irq,
- .timer = &tegra_timer,
- .init_machine = tegra_kaen_init,
- .init_late = tegra_init_late,
- .restart = tegra_assert_system_reset,
-MACHINE_END
-
-MACHINE_START(WARIO, "wario")
- .atag_offset = 0x100,
- .map_io = tegra_map_common_io,
- .init_early = tegra20_init_early,
- .init_irq = tegra_init_irq,
- .handle_irq = gic_handle_irq,
- .timer = &tegra_timer,
- .init_machine = tegra_wario_init,
- .init_late = tegra_init_late,
- .restart = tegra_assert_system_reset,
-MACHINE_END
diff --git a/arch/arm/mach-tegra/board-seaboard.h b/arch/arm/mach-tegra/board-seaboard.h
deleted file mode 100644
index 4c45d4ca3c4..00000000000
--- a/arch/arm/mach-tegra/board-seaboard.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * arch/arm/mach-tegra/board-seaboard.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef _MACH_TEGRA_BOARD_SEABOARD_H
-#define _MACH_TEGRA_BOARD_SEABOARD_H
-
-#include <mach/gpio-tegra.h>
-
-#define SEABOARD_GPIO_TPS6586X(_x_) (TEGRA_NR_GPIOS + (_x_))
-#define SEABOARD_GPIO_WM8903(_x_) (SEABOARD_GPIO_TPS6586X(4) + (_x_))
-
-#define TEGRA_GPIO_SD2_CD TEGRA_GPIO_PI5
-#define TEGRA_GPIO_SD2_WP TEGRA_GPIO_PH1
-#define TEGRA_GPIO_SD2_POWER TEGRA_GPIO_PI6
-#define TEGRA_GPIO_LIDSWITCH TEGRA_GPIO_PC7
-#define TEGRA_GPIO_USB1 TEGRA_GPIO_PD0
-#define TEGRA_GPIO_POWERKEY TEGRA_GPIO_PV2
-#define TEGRA_GPIO_BACKLIGHT TEGRA_GPIO_PD4
-#define TEGRA_GPIO_LVDS_SHUTDOWN TEGRA_GPIO_PB2
-#define TEGRA_GPIO_BACKLIGHT_PWM TEGRA_GPIO_PU5
-#define TEGRA_GPIO_BACKLIGHT_VDD TEGRA_GPIO_PW0
-#define TEGRA_GPIO_EN_VDD_PNL TEGRA_GPIO_PC6
-#define TEGRA_GPIO_MAGNETOMETER TEGRA_GPIO_PN5
-#define TEGRA_GPIO_ISL29018_IRQ TEGRA_GPIO_PZ2
-#define TEGRA_GPIO_AC_ONLINE TEGRA_GPIO_PV3
-#define TEGRA_GPIO_WWAN_PWR SEABOARD_GPIO_TPS6586X(2)
-#define TEGRA_GPIO_CDC_IRQ TEGRA_GPIO_PX3
-#define TEGRA_GPIO_SPKR_EN SEABOARD_GPIO_WM8903(2)
-#define TEGRA_GPIO_HP_DET TEGRA_GPIO_PX1
-#define TEGRA_GPIO_KAEN_HP_MUTE TEGRA_GPIO_PA5
-
-void seaboard_pinmux_init(void);
-
-#endif
diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h
index 65014968fc6..f88e5143c76 100644
--- a/arch/arm/mach-tegra/board.h
+++ b/arch/arm/mach-tegra/board.h
@@ -46,5 +46,14 @@ int __init tegra_powergate_debugfs_init(void);
static inline int tegra_powergate_debugfs_init(void) { return 0; }
#endif
+int __init harmony_regulator_init(void);
+#ifdef CONFIG_TEGRA_PCI
+int __init harmony_pcie_init(void);
+#else
+static inline int harmony_pcie_init(void) { return 0; }
+#endif
+
+void __init tegra_paz00_wifikill_init(void);
+
extern struct sys_timer tegra_timer;
#endif
diff --git a/drivers/staging/omapdrm/omap_drv.h b/drivers/staging/omapdrm/omap_drv.h
index f238d574da0..2092a9167d2 100644
--- a/drivers/staging/omapdrm/omap_drv.h
+++ b/drivers/staging/omapdrm/omap_drv.h
@@ -25,8 +25,8 @@
#include <linux/types.h>
#include <drm/drmP.h>
#include <drm/drm_crtc_helper.h>
+#include <linux/platform_data/omap_drm.h>
#include "omap_drm.h"
-#include "omap_priv.h"
#define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__)
#define VERB(fmt, ...) if (0) DRM_DEBUG(fmt, ##__VA_ARGS__) /* verbose debug */
diff --git a/drivers/staging/omapdrm/omap_priv.h b/include/linux/platform_data/omap_drm.h
index ef644144714..3da73bdc203 100644
--- a/drivers/staging/omapdrm/omap_priv.h
+++ b/include/linux/platform_data/omap_drm.h
@@ -1,8 +1,8 @@
/*
- * include/drm/omap_priv.h
+ * DRM/KMS platform data for TI OMAP platforms
*
- * Copyright (C) 2011 Texas Instruments
- * Author: Rob Clark <rob@ti.com>
+ * Copyright (C) 2012 Texas Instruments
+ * Author: Rob Clark <rob.clark@linaro.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
@@ -17,13 +17,11 @@
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#ifndef __OMAP_PRIV_H__
-#define __OMAP_PRIV_H__
+#ifndef __PLATFORM_DATA_OMAP_DRM_H__
+#define __PLATFORM_DATA_OMAP_DRM_H__
-/* Non-userspace facing APIs
- */
-
-/* optional platform data to configure the default configuration of which
+/*
+ * Optional platform data to configure the default configuration of which
* pipes/overlays/CRTCs are used.. if this is not provided, then instead the
* first CONFIG_DRM_OMAP_NUM_CRTCS are used, and they are each connected to
* one manager, with priority given to managers that are connected to
@@ -49,7 +47,6 @@ struct omap_kms_platform_data {
struct omap_drm_platform_data {
struct omap_kms_platform_data *kms_pdata;
- struct omap_dmm_platform_data *dmm_pdata;
};
-#endif /* __OMAP_DRM_H__ */
+#endif /* __PLATFORM_DATA_OMAP_DRM_H__ */