summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/b43/phy_lcn.c
AgeCommit message (Collapse)AuthorFilesLines
2015-11-18b43: move under broadcom vendor directoryKalle Valo1-855/+0
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2014-08-25b43: flush some writes on Broadcom MIPS SoCsRafał Miłecki1-3/+3
Access to PHY and radio registers is indirect on Broadcom hardware and it seems that addressing on some MIPS SoCs may require flushing. So far this problem was noticed on 0x4716 SoC only (marketing names: BCM4717, BCM4718). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-25b43: don't duplicate common PHY read/write opsRafał Miłecki1-14/+0
Most of the PHYs use the same way of accessing registers, so move that code to the shared place. An exception is G-PHY which sometimes access A-PHY regs and requires special handling. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-18b43: use one shared function for setting MAC frequencyRafał Miłecki1-34/+1
By the way add few chipsets that were tracked with "wl" dumps. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-25mac80211: Use a cfg80211_chan_def in ieee80211_hw_conf_chanKarl Beldan1-2/+3
Drivers that don't use chanctxes cannot perform VHT association because they still use a "backward compatibility" pair of {ieee80211_channel, nl80211_channel_type} in ieee80211_conf and ieee80211_local. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> [fix kernel-doc] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-09-27b43: LCN-PHY: minor clean upsRafał Miłecki1-1/+1
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-19b43: LCN-PHY: finish sense setupRafał Miłecki1-3/+87
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-19b43: LCN-PHY: add more init tweaksRafał Miłecki1-2/+20
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-19b43: LCN-PHY: init TX power controlRafał Miłecki1-1/+91
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-19b43: LCN-PHY: implement SPUR avoidance modeRafał Miłecki1-2/+56
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-19b43: LCN-PHY: set TX filtersRafał Miłecki1-1/+106
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-19b43: LCN-PHY: tweaks for channel switchingRafał Miłecki1-4/+63
They have been taken from brcmsmac, add Broadcom's copyright. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-14b43: add my copyrights and myself as the module authorRafał Miłecki1-0/+2
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13b43: LCN-PHY: add conditions for few operationsRafał Miłecki1-13/+31
It was not possible to guess the conditions from MMIO dumps. Take them from brcmsmac code. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13b43: LCN-PHY: rename functions, get rid of magic namesRafał Miłecki1-6/+23
We've compared b43 with brcmsmac and took functions names from the later. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13b43: LCN-PHY: put tables functions in correct fileRafał Miłecki1-10/+0
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13b43: LCN-PHY: implement saving and restoring PHY & radio configurationRafał Miłecki1-0/+35
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13b43: LCN-PHY: prepare functions for channel switchingRafał Miłecki1-2/+84
Switching is not fully implemented yet, prepare place for the code. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13b43: LCN-PHY: implement more PHY ops before radio initRafał Miłecki1-3/+53
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13b43: LCN-PHY: add R/W ops for PHY and radioRafał Miłecki1-2/+40
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24b43: LCN-PHY: init 0x2064 radioRafał Miłecki1-0/+54
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24b43: LCN-PHY: basic PHY initRafał Miłecki1-2/+72
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24b43: LCN-PHY: switch analogRafał Miłecki1-1/+11
Analog is switched on right after reading PHY version: read16 0xfaafc3e0 -> 0xa801 phy_read(0x043b) -> 0x0000 phy_write(0x043b) <- 0x0000 Switched off after after killing radio: >>> Switch Radio(OFF) end phy_read(0x043c) -> 0x0000 phy_write(0x043c) <- 0x0007 phy_read(0x043b) -> 0x0000 phy_write(0x043b) <- 0x0007 Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24b43: LCN-PHY: implement disabling radioRafał Miłecki1-0/+23
wl reads radio version, then disables it. That's how we found it in MMIO dump: radio_read(0x0000) -> 0x0031 <-- RADIO READ WITHOUT 0x200 SET! radio_read(0x0001) -> 0x0064 <-- RADIO READ WITHOUT 0x200 SET! radio_read(0x0002) -> 0x0020 <-- RADIO READ WITHOUT 0x200 SET! read32 0xfaafc120 -> 0x04000400 phy_read(0x044d) -> 0x0000 phy_write(0x044d) <- 0x0000 phy_read(0x044c) -> 0x1fff phy_write(0x044c) <- 0x1fff phy_read(0x04b7) -> 0x0000 phy_write(0x04b7) <- 0x0000 phy_read(0x04b1) -> 0x0000 phy_write(0x04b1) <- 0x0000 phy_read(0x04b0) -> 0x7dff phy_write(0x04b0) <- 0x7dff phy_read(0x04fa) -> 0x0000 phy_write(0x04fa) <- 0x0000 phy_read(0x04f9) -> 0x007f phy_write(0x04f9) <- 0x007f Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24b43: LCN-PHY: add very basic PHY opsRafał Miłecki1-2/+52
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08b43: LCN-PHY add place for new PHY supportRafał Miłecki1-0/+52
LCN-PHY was found in 14e4:4727 card. It uses LCN/1 and 0x2064/1 radio. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 07:56:32 +0000