diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/hwmon/w83627hf.c | 16 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-viapro.c | 27 | ||||
| -rw-r--r-- | drivers/i2c/chips/ds1337.c | 4 |
3 files changed, 20 insertions, 27 deletions
diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c index 70ef926c3bd8..4e9a04e1f08e 100644 --- a/drivers/hwmon/w83627hf.c +++ b/drivers/hwmon/w83627hf.c @@ -180,11 +180,10 @@ superio_exit(void) #define W83781D_REG_BANK 0x4E #define W83781D_REG_CONFIG 0x40 -#define W83781D_REG_ALARM1 0x41 -#define W83781D_REG_ALARM2 0x42 -#define W83781D_REG_ALARM3 0x450 +#define W83781D_REG_ALARM1 0x459 +#define W83781D_REG_ALARM2 0x45A +#define W83781D_REG_ALARM3 0x45B -#define W83781D_REG_IRQ 0x4C #define W83781D_REG_BEEP_CONFIG 0x4D #define W83781D_REG_BEEP_INTS1 0x56 #define W83781D_REG_BEEP_INTS2 0x57 @@ -1370,13 +1369,6 @@ static void w83627hf_init_client(struct i2c_client *client) W83781D_REG_TEMP3_CONFIG, tmp & 0xfe); } } - - /* enable comparator mode for temp2 and temp3 so - alarm indication will work correctly */ - i = w83627hf_read_value(client, W83781D_REG_IRQ); - if (!(i & 0x40)) - w83627hf_write_value(client, W83781D_REG_IRQ, - i | 0x40); } /* Start monitoring */ @@ -1400,7 +1392,7 @@ static struct w83627hf_data *w83627hf_update_device(struct device *dev) /* skip missing sensors */ if (((data->type == w83697hf) && (i == 1)) || ((data->type == w83627thf || data->type == w83637hf) - && (i == 4 || i == 5))) + && (i == 5 || i == 6))) continue; data->in[i] = w83627hf_read_value(client, W83781D_REG_IN(i)); diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index c9366b504833..a2237d4b2cf2 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -142,19 +142,18 @@ static int vt596_transaction(u8 size) /* Make sure the SMBus host is ready to start transmitting */ if ((temp = inb_p(SMBHSTSTS)) & 0x1F) { dev_dbg(&vt596_adapter.dev, "SMBus busy (0x%02x). " - "Resetting... ", temp); + "Resetting...\n", temp); outb_p(temp, SMBHSTSTS); if ((temp = inb_p(SMBHSTSTS)) & 0x1F) { - printk("Failed! (0x%02x)\n", temp); + dev_err(&vt596_adapter.dev, "SMBus reset failed! " + "(0x%02x)\n", temp); return -1; - } else { - printk("Successful!\n"); } } /* Start the transaction by setting bit 6 */ - outb_p(0x40 | (size & 0x3C), SMBHSTCNT); + outb_p(0x40 | size, SMBHSTCNT); /* We will always wait for a fraction of a second */ do { @@ -171,7 +170,7 @@ static int vt596_transaction(u8 size) if (temp & 0x10) { result = -1; dev_err(&vt596_adapter.dev, "Transaction failed (0x%02x)\n", - inb_p(SMBHSTCNT) & 0x3C); + size); } if (temp & 0x08) { @@ -180,11 +179,13 @@ static int vt596_transaction(u8 size) } if (temp & 0x04) { + int read = inb_p(SMBHSTADD) & 0x01; result = -1; - /* Quick commands are used to probe for chips, so - errors are expected, and we don't want to frighten the - user. */ - if ((inb_p(SMBHSTCNT) & 0x3C) != VT596_QUICK) + /* The quick and receive byte commands are used to probe + for chips, so errors are expected, and we don't want + to frighten the user. */ + if (!((size == VT596_QUICK && !read) || + (size == VT596_BYTE && read))) dev_err(&vt596_adapter.dev, "Transaction error!\n"); } @@ -462,9 +463,9 @@ static void __exit i2c_vt596_exit(void) } } -MODULE_AUTHOR( - "Frodo Looijaard <frodol@dds.nl> and " - "Philip Edelbrock <phil@netroedge.com>"); +MODULE_AUTHOR("Kyosti Malkki <kmalkki@cc.hut.fi>, " + "Mark D. Studebaker <mdsxyz123@yahoo.com> and " + "Jean Delvare <khali@linux-fr.org>"); MODULE_DESCRIPTION("vt82c596 SMBus driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/chips/ds1337.c b/drivers/i2c/chips/ds1337.c index 01b037007410..02682fb794c8 100644 --- a/drivers/i2c/chips/ds1337.c +++ b/drivers/i2c/chips/ds1337.c @@ -164,9 +164,9 @@ static int ds1337_set_datetime(struct i2c_client *client, struct rtc_time *dt) buf[1] = BIN2BCD(dt->tm_sec); buf[2] = BIN2BCD(dt->tm_min); buf[3] = BIN2BCD(dt->tm_hour); - buf[4] = BIN2BCD(dt->tm_wday) + 1; + buf[4] = BIN2BCD(dt->tm_wday + 1); buf[5] = BIN2BCD(dt->tm_mday); - buf[6] = BIN2BCD(dt->tm_mon) + 1; + buf[6] = BIN2BCD(dt->tm_mon + 1); val = dt->tm_year; if (val >= 100) { val -= 100; |