diff options
Diffstat (limited to 'drivers/scsi/mpt3sas/mpt3sas_ctl.h')
| -rw-r--r-- | drivers/scsi/mpt3sas/mpt3sas_ctl.h | 418 |
1 files changed, 418 insertions, 0 deletions
diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.h b/drivers/scsi/mpt3sas/mpt3sas_ctl.h new file mode 100644 index 000000000000..bd89f4f00550 --- /dev/null +++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.h @@ -0,0 +1,418 @@ +/* + * Management Module Support for MPT (Message Passing Technology) based + * controllers + * + * This code is based on drivers/scsi/mpt3sas/mpt3sas_ctl.h + * Copyright (C) 2012 LSI Corporation + * (mailto:DL-MPTFusionLinux@lsi.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * NO WARRANTY + * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + * solely responsible for determining the appropriateness of using and + * distributing the Program and assumes all risks associated with its + * exercise of rights under this Agreement, including but not limited to + * the risks and costs of program errors, damage to or loss of data, + * programs or equipment, and unavailability or interruption of operations. + + * DISCLAIMER OF LIABILITY + * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + */ + +#ifndef MPT3SAS_CTL_H_INCLUDED +#define MPT3SAS_CTL_H_INCLUDED + +#ifdef __KERNEL__ +#include <linux/miscdevice.h> +#endif + + +#ifndef MPT3SAS_MINOR +#define MPT3SAS_MINOR (MPT_MINOR + 2) +#endif +#define MPT3SAS_DEV_NAME "mpt3ctl" +#define MPT3_MAGIC_NUMBER 'L' +#define MPT3_IOCTL_DEFAULT_TIMEOUT (10) /* in seconds */ + +/** + * IOCTL opcodes + */ +#define MPT3IOCINFO _IOWR(MPT3_MAGIC_NUMBER, 17, \ + struct mpt3_ioctl_iocinfo) +#define MPT3COMMAND _IOWR(MPT3_MAGIC_NUMBER, 20, \ + struct mpt3_ioctl_command) +#ifdef CONFIG_COMPAT +#define MPT3COMMAND32 _IOWR(MPT3_MAGIC_NUMBER, 20, \ + struct mpt3_ioctl_command32) +#endif +#define MPT3EVENTQUERY _IOWR(MPT3_MAGIC_NUMBER, 21, \ + struct mpt3_ioctl_eventquery) +#define MPT3EVENTENABLE _IOWR(MPT3_MAGIC_NUMBER, 22, \ + struct mpt3_ioctl_eventenable) +#define MPT3EVENTREPORT _IOWR(MPT3_MAGIC_NUMBER, 23, \ + struct mpt3_ioctl_eventreport) +#define MPT3HARDRESET _IOWR(MPT3_MAGIC_NUMBER, 24, \ + struct mpt3_ioctl_diag_reset) +#define MPT3BTDHMAPPING _IOWR(MPT3_MAGIC_NUMBER, 31, \ + struct mpt3_ioctl_btdh_mapping) + +/* diag buffer support */ +#define MPT3DIAGREGISTER _IOWR(MPT3_MAGIC_NUMBER, 26, \ + struct mpt3_diag_register) +#define MPT3DIAGRELEASE _IOWR(MPT3_MAGIC_NUMBER, 27, \ + struct mpt3_diag_release) +#define MPT3DIAGUNREGISTER _IOWR(MPT3_MAGIC_NUMBER, 28, \ + struct mpt3_diag_unregister) +#define MPT3DIAGQUERY _IOWR(MPT3_MAGIC_NUMBER, 29, \ + struct mpt3_diag_query) +#define MPT3DIAGREADBUFFER _IOWR(MPT3_MAGIC_NUMBER, 30, \ + struct mpt3_diag_read_buffer) + +/** + * struct mpt3_ioctl_header - main header structure + * @ioc_number - IOC unit number + * @port_number - IOC port number + * @max_data_size - maximum number bytes to transfer on read + */ +struct mpt3_ioctl_header { + uint32_t ioc_number; + uint32_t port_number; + uint32_t max_data_size; +}; + +/** + * struct mpt3_ioctl_diag_reset - diagnostic reset + * @hdr - generic header + */ +struct mpt3_ioctl_diag_reset { + struct mpt3_ioctl_header hdr; +}; + + +/** + * struct mpt3_ioctl_pci_info - pci device info + * @device - pci device id + * @function - pci function id + * @bus - pci bus id + * @segment_id - pci segment id + */ +struct mpt3_ioctl_pci_info { + union { + struct { + uint32_t device:5; + uint32_t function:3; + uint32_t bus:24; + } bits; + uint32_t word; + } u; + uint32_t segment_id; +}; + + +#define MPT2_IOCTL_INTERFACE_SCSI (0x00) +#define MPT2_IOCTL_INTERFACE_FC (0x01) +#define MPT2_IOCTL_INTERFACE_FC_IP (0x02) +#define MPT2_IOCTL_INTERFACE_SAS (0x03) +#define MPT2_IOCTL_INTERFACE_SAS2 (0x04) +#define MPT3_IOCTL_INTERFACE_SAS3 (0x06) +#define MPT2_IOCTL_VERSION_LENGTH (32) + +/** + * struct mpt3_ioctl_iocinfo - generic controller info + * @hdr - generic header + * @adapter_type - type of adapter (spi, fc, sas) + * @port_number - port number + * @pci_id - PCI Id + * @hw_rev - hardware revision + * @sub_system_device - PCI subsystem Device ID + * @sub_system_vendor - PCI subsystem Vendor ID + * @rsvd0 - reserved + * @firmware_version - firmware version + * @bios_version - BIOS version + * @driver_version - driver version - 32 ASCII characters + * @rsvd1 - reserved + * @scsi_id - scsi id of adapter 0 + * @rsvd2 - reserved + * @pci_information - pci info (2nd revision) + */ +struct mpt3_ioctl_iocinfo { + struct mpt3_ioctl_header hdr; + uint32_t adapter_type; + uint32_t port_number; + uint32_t pci_id; + uint32_t hw_rev; + uint32_t subsystem_device; + uint32_t subsystem_vendor; + uint32_t rsvd0; + uint32_t firmware_version; + uint32_t bios_version; + uint8_t driver_version[MPT2_IOCTL_VERSION_LENGTH]; + uint8_t rsvd1; + uint8_t scsi_id; + uint16_t rsvd2; + struct mpt3_ioctl_pci_info pci_information; +}; + + +/* number of event log entries */ +#define MPT3SAS_CTL_EVENT_LOG_SIZE (50) + +/** + * struct mpt3_ioctl_eventquery - query event count and type + * @hdr - generic header + * @event_entries - number of events returned by get_event_report + * @rsvd - reserved + * @event_types - type of events currently being captured + */ +struct mpt3_ioctl_eventquery { + struct mpt3_ioctl_header hdr; + uint16_t event_entries; + uint16_t rsvd; + uint32_t event_types[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS]; +}; + +/** + * struct mpt3_ioctl_eventenable - enable/disable event capturing + * @hdr - generic header + * @event_types - toggle off/on type of events to be captured + */ +struct mpt3_ioctl_eventenable { + struct mpt3_ioctl_header hdr; + uint32_t event_types[4]; +}; + +#define MPT3_EVENT_DATA_SIZE (192) +/** + * struct MPT3_IOCTL_EVENTS - + * @event - the event that was reported + * @context - unique value for each event assigned by driver + * @data - event data returned in fw reply message + */ +struct MPT3_IOCTL_EVENTS { + uint32_t event; + uint32_t context; + uint8_t data[MPT3_EVENT_DATA_SIZE]; +}; + +/** + * struct mpt3_ioctl_eventreport - returing event log + * @hdr - generic header + * @event_data - (see struct MPT3_IOCTL_EVENTS) + */ +struct mpt3_ioctl_eventreport { + struct mpt3_ioctl_header hdr; + struct MPT3_IOCTL_EVENTS event_data[1]; +}; + +/** + * struct mpt3_ioctl_command - generic mpt firmware passthru ioctl + * @hdr - generic header + * @timeout - command timeout in seconds. (if zero then use driver default + * value). + * @reply_frame_buf_ptr - reply location + * @data_in_buf_ptr - destination for read + * @data_out_buf_ptr - data source for write + * @sense_data_ptr - sense data location + * @max_reply_bytes - maximum number of reply bytes to be sent to app. + * @data_in_size - number bytes for data transfer in (read) + * @data_out_size - number bytes for data transfer out (write) + * @max_sense_bytes - maximum number of bytes for auto sense buffers + * @data_sge_offset - offset in words from the start of the request message to + * the first SGL + * @mf[1]; + */ +struct mpt3_ioctl_command { + struct mpt3_ioctl_header hdr; + uint32_t timeout; + void __user *reply_frame_buf_ptr; + void __user *data_in_buf_ptr; + void __user *data_out_buf_ptr; + void __user *sense_data_ptr; + uint32_t max_reply_bytes; + uint32_t data_in_size; + uint32_t data_out_size; + uint32_t max_sense_bytes; + uint32_t data_sge_offset; + uint8_t mf[1]; +}; + +#ifdef CONFIG_COMPAT +struct mpt3_ioctl_command32 { + struct mpt3_ioctl_header hdr; + uint32_t timeout; + uint32_t reply_frame_buf_ptr; + uint32_t data_in_buf_ptr; + uint32_t data_out_buf_ptr; + uint32_t sense_data_ptr; + uint32_t max_reply_bytes; + uint32_t data_in_size; + uint32_t data_out_size; + uint32_t max_sense_bytes; + uint32_t data_sge_offset; + uint8_t mf[1]; +}; +#endif + +/** + * struct mpt3_ioctl_btdh_mapping - mapping info + * @hdr - generic header + * @id - target device identification number + * @bus - SCSI bus number that the target device exists on + * @handle - device handle for the target device + * @rsvd - reserved + * + * To obtain a bus/id the application sets + * handle to valid handle, and bus/id to 0xFFFF. + * + * To obtain the device handle the application sets + * bus/id valid value, and the handle to 0xFFFF. + */ +struct mpt3_ioctl_btdh_mapping { + struct mpt3_ioctl_header hdr; + uint32_t id; + uint32_t bus; + uint16_t handle; + uint16_t rsvd; +}; + + + +/* application flags for mpt3_diag_register, mpt3_diag_query */ +#define MPT3_APP_FLAGS_APP_OWNED (0x0001) +#define MPT3_APP_FLAGS_BUFFER_VALID (0x0002) +#define MPT3_APP_FLAGS_FW_BUFFER_ACCESS (0x0004) + +/* flags for mpt3_diag_read_buffer */ +#define MPT3_FLAGS_REREGISTER (0x0001) + +#define MPT3_PRODUCT_SPECIFIC_DWORDS 23 + +/** + * struct mpt3_diag_register - application register with driver + * @hdr - generic header + * @reserved - + * @buffer_type - specifies either TRACE, SNAPSHOT, or EXTENDED + * @application_flags - misc flags + * @diagnostic_flags - specifies flags affecting command processing + * @product_specific - product specific information + * @requested_buffer_size - buffers size in bytes + * @unique_id - tag specified by application that is used to signal ownership + * of the buffer. + * + * This will allow the driver to setup any required buffers that will be + * needed by firmware to communicate with the driver. + */ +struct mpt3_diag_register { + struct mpt3_ioctl_header hdr; + uint8_t reserved; + uint8_t buffer_type; + uint16_t application_flags; + uint32_t diagnostic_flags; + uint32_t product_specific[MPT3_PRODUCT_SPECIFIC_DWORDS]; + uint32_t requested_buffer_size; + uint32_t unique_id; +}; + +/** + * struct mpt3_diag_unregister - application unregister with driver + * @hdr - generic header + * @unique_id - tag uniquely identifies the buffer to be unregistered + * + * This will allow the driver to cleanup any memory allocated for diag + * messages and to free up any resources. + */ +struct mpt3_diag_unregister { + struct mpt3_ioctl_header hdr; + uint32_t unique_id; +}; + +/** + * struct mpt3_diag_query - query relevant info associated with diag buffers + * @hdr - generic header + * @reserved - + * @buffer_type - specifies either TRACE, SNAPSHOT, or EXTENDED + * @application_flags - misc flags + * @diagnostic_flags - specifies flags affecting command processing + * @product_specific - product specific information + * @total_buffer_size - diag buffer size in bytes + * @driver_added_buffer_size - size of extra space appended to end of buffer + * @unique_id - unique id associated with this buffer. + * + * The application will send only buffer_type and unique_id. Driver will + * inspect unique_id first, if valid, fill in all the info. If unique_id is + * 0x00, the driver will return info specified by Buffer Type. + */ +struct mpt3_diag_query { + struct mpt3_ioctl_header hdr; + uint8_t reserved; + uint8_t buffer_type; + uint16_t application_flags; + uint32_t diagnostic_flags; + uint32_t product_specific[MPT3_PRODUCT_SPECIFIC_DWORDS]; + uint32_t total_buffer_size; + uint32_t driver_added_buffer_size; + uint32_t unique_id; +}; + +/** + * struct mpt3_diag_release - request to send Diag Release Message to firmware + * @hdr - generic header + * @unique_id - tag uniquely identifies the buffer to be released + * + * This allows ownership of the specified buffer to returned to the driver, + * allowing an application to read the buffer without fear that firmware is + * overwritting information in the buffer. + */ +struct mpt3_diag_release { + struct mpt3_ioctl_header hdr; + uint32_t unique_id; +}; + +/** + * struct mpt3_diag_read_buffer - request for copy of the diag buffer + * @hdr - generic header + * @status - + * @reserved - + * @flags - misc flags + * @starting_offset - starting offset within drivers buffer where to start + * reading data at into the specified application buffer + * @bytes_to_read - number of bytes to copy from the drivers buffer into the + * application buffer starting at starting_offset. + * @unique_id - unique id associated with this buffer. + * @diagnostic_data - data payload + */ +struct mpt3_diag_read_buffer { + struct mpt3_ioctl_header hdr; + uint8_t status; + uint8_t reserved; + uint16_t flags; + uint32_t starting_offset; + uint32_t bytes_to_read; + uint32_t unique_id; + uint32_t diagnostic_data[1]; +}; + +#endif /* MPT3SAS_CTL_H_INCLUDED */ |