diff options
Diffstat (limited to 'drivers/net/wireless/wl12xx/boot.c')
-rw-r--r-- | drivers/net/wireless/wl12xx/boot.c | 73 |
1 files changed, 7 insertions, 66 deletions
diff --git a/drivers/net/wireless/wl12xx/boot.c b/drivers/net/wireless/wl12xx/boot.c index 8f9cf5a816ea..84d295126edf 100644 --- a/drivers/net/wireless/wl12xx/boot.c +++ b/drivers/net/wireless/wl12xx/boot.c @@ -33,65 +33,6 @@ #include "event.h" #include "rx.h" -static struct wl1271_partition_set part_table[PART_TABLE_LEN] = { - [PART_DOWN] = { - .mem = { - .start = 0x00000000, - .size = 0x000177c0 - }, - .reg = { - .start = REGISTERS_BASE, - .size = 0x00008800 - }, - .mem2 = { - .start = 0x00000000, - .size = 0x00000000 - }, - .mem3 = { - .start = 0x00000000, - .size = 0x00000000 - }, - }, - - [PART_WORK] = { - .mem = { - .start = 0x00040000, - .size = 0x00014fc0 - }, - .reg = { - .start = REGISTERS_BASE, - .size = 0x0000a000 - }, - .mem2 = { - .start = 0x003004f8, - .size = 0x00000004 - }, - .mem3 = { - .start = 0x00040404, - .size = 0x00000000 - }, - }, - - [PART_DRPW] = { - .mem = { - .start = 0x00040000, - .size = 0x00014fc0 - }, - .reg = { - .start = DRPW_BASE, - .size = 0x00006000 - }, - .mem2 = { - .start = 0x00000000, - .size = 0x00000000 - }, - .mem3 = { - .start = 0x00000000, - .size = 0x00000000 - } - } -}; - static void wl1271_boot_set_ecpu_ctrl(struct wl1271 *wl, u32 flag) { u32 cpu_ctrl; @@ -181,13 +122,13 @@ static int wl1271_boot_upload_firmware_chunk(struct wl1271 *wl, void *buf, return -ENOMEM; } - memcpy(&partition, &part_table[PART_DOWN], sizeof(partition)); + memcpy(&partition, &wl12xx_part_table[PART_DOWN], sizeof(partition)); partition.mem.start = dest; wl1271_set_partition(wl, &partition); /* 10.1 set partition limit and chunk num */ chunk_num = 0; - partition_limit = part_table[PART_DOWN].mem.size; + partition_limit = wl12xx_part_table[PART_DOWN].mem.size; while (chunk_num < fw_data_len / CHUNK_SIZE) { /* 10.2 update partition, if needed */ @@ -195,7 +136,7 @@ static int wl1271_boot_upload_firmware_chunk(struct wl1271 *wl, void *buf, if (addr > partition_limit) { addr = dest + chunk_num * CHUNK_SIZE; partition_limit = chunk_num * CHUNK_SIZE + - part_table[PART_DOWN].mem.size; + wl12xx_part_table[PART_DOWN].mem.size; partition.mem.start = addr; wl1271_set_partition(wl, &partition); } @@ -383,7 +324,7 @@ static int wl1271_boot_upload_nvs(struct wl1271 *wl) nvs_len -= nvs_ptr - (u8 *)wl->nvs; /* Now we must set the partition correctly */ - wl1271_set_partition(wl, &part_table[PART_WORK]); + wl1271_set_partition(wl, &wl12xx_part_table[PART_WORK]); /* Copy the NVS tables to a new block to ensure alignment */ nvs_aligned = kmemdup(nvs_ptr, nvs_len, GFP_KERNEL); @@ -492,7 +433,7 @@ static int wl1271_boot_run_firmware(struct wl1271 *wl) wl->event_box_addr = wl1271_read32(wl, REG_EVENT_MAILBOX_PTR); /* set the working partition to its "running" mode offset */ - wl1271_set_partition(wl, &part_table[PART_WORK]); + wl1271_set_partition(wl, &wl12xx_part_table[PART_WORK]); wl1271_debug(DEBUG_MAILBOX, "cmd_box_addr 0x%x event_box_addr 0x%x", wl->cmd_box_addr, wl->event_box_addr); @@ -769,7 +710,7 @@ int wl1271_load_firmware(struct wl1271 *wl) wl1271_write32(wl, WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL); udelay(500); - wl1271_set_partition(wl, &part_table[PART_DRPW]); + wl1271_set_partition(wl, &wl12xx_part_table[PART_DRPW]); /* Read-modify-write DRPW_SCRATCH_START register (see next state) to be used by DRPw FW. The RTRIM value will be added by the FW @@ -788,7 +729,7 @@ int wl1271_load_firmware(struct wl1271 *wl) wl1271_write32(wl, DRPW_SCRATCH_START, clk); - wl1271_set_partition(wl, &part_table[PART_WORK]); + wl1271_set_partition(wl, &wl12xx_part_table[PART_WORK]); /* Disable interrupts */ wl1271_write32(wl, ACX_REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL); |