diff options
Diffstat (limited to 'drivers/net/ethernet/atheros/atl1e/atl1e_param.c')
| -rw-r--r-- | drivers/net/ethernet/atheros/atl1e/atl1e_param.c | 268 |
1 files changed, 268 insertions, 0 deletions
diff --git a/drivers/net/ethernet/atheros/atl1e/atl1e_param.c b/drivers/net/ethernet/atheros/atl1e/atl1e_param.c new file mode 100644 index 000000000000..0ce60b6e7ef0 --- /dev/null +++ b/drivers/net/ethernet/atheros/atl1e/atl1e_param.c @@ -0,0 +1,268 @@ +/* + * Copyright(c) 2007 Atheros Corporation. All rights reserved. + * + * Derived from Intel e1000 driver + * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include <linux/netdevice.h> + +#include "atl1e.h" + +/* This is the only thing that needs to be changed to adjust the + * maximum number of ports that the driver can manage. + */ + +#define ATL1E_MAX_NIC 32 + +#define OPTION_UNSET -1 +#define OPTION_DISABLED 0 +#define OPTION_ENABLED 1 + +/* All parameters are treated the same, as an integer array of values. + * This macro just reduces the need to repeat the same declaration code + * over and over (plus this helps to avoid typo bugs). + */ +#define ATL1E_PARAM_INIT { [0 ... ATL1E_MAX_NIC] = OPTION_UNSET } + +#define ATL1E_PARAM(x, desc) \ + static int __devinitdata x[ATL1E_MAX_NIC + 1] = ATL1E_PARAM_INIT; \ + static unsigned int num_##x; \ + module_param_array_named(x, x, int, &num_##x, 0); \ + MODULE_PARM_DESC(x, desc); + +/* Transmit Memory count + * + * Valid Range: 64-2048 + * + * Default Value: 128 + */ +#define ATL1E_MIN_TX_DESC_CNT 32 +#define ATL1E_MAX_TX_DESC_CNT 1020 +#define ATL1E_DEFAULT_TX_DESC_CNT 128 +ATL1E_PARAM(tx_desc_cnt, "Transmit description count"); + +/* Receive Memory Block Count + * + * Valid Range: 16-512 + * + * Default Value: 128 + */ +#define ATL1E_MIN_RX_MEM_SIZE 8 /* 8KB */ +#define ATL1E_MAX_RX_MEM_SIZE 1024 /* 1MB */ +#define ATL1E_DEFAULT_RX_MEM_SIZE 256 /* 128KB */ +ATL1E_PARAM(rx_mem_size, "memory size of rx buffer(KB)"); + +/* User Specified MediaType Override + * + * Valid Range: 0-5 + * - 0 - auto-negotiate at all supported speeds + * - 1 - only link at 100Mbps Full Duplex + * - 2 - only link at 100Mbps Half Duplex + * - 3 - only link at 10Mbps Full Duplex + * - 4 - only link at 10Mbps Half Duplex + * Default Value: 0 + */ + +ATL1E_PARAM(media_type, "MediaType Select"); + +/* Interrupt Moderate Timer in units of 2 us + * + * Valid Range: 10-65535 + * + * Default Value: 45000(90ms) + */ +#define INT_MOD_DEFAULT_CNT 100 /* 200us */ +#define INT_MOD_MAX_CNT 65000 +#define INT_MOD_MIN_CNT 50 +ATL1E_PARAM(int_mod_timer, "Interrupt Moderator Timer"); + +#define AUTONEG_ADV_DEFAULT 0x2F +#define AUTONEG_ADV_MASK 0x2F +#define FLOW_CONTROL_DEFAULT FLOW_CONTROL_FULL + +#define FLASH_VENDOR_DEFAULT 0 +#define FLASH_VENDOR_MIN 0 +#define FLASH_VENDOR_MAX 2 + +struct atl1e_option { + enum { enable_option, range_option, list_option } type; + char *name; + char *err; + int def; + union { + struct { /* range_option info */ + int min; + int max; + } r; + struct { /* list_option info */ + int nr; + struct atl1e_opt_list { int i; char *str; } *p; + } l; + } arg; +}; + +static int __devinit atl1e_validate_option(int *value, struct atl1e_option *opt, struct atl1e_adapter *adapter) +{ + if (*value == OPTION_UNSET) { + *value = opt->def; + return 0; + } + + switch (opt->type) { + case enable_option: + switch (*value) { + case OPTION_ENABLED: + netdev_info(adapter->netdev, + "%s Enabled\n", opt->name); + return 0; + case OPTION_DISABLED: + netdev_info(adapter->netdev, + "%s Disabled\n", opt->name); + return 0; + } + break; + case range_option: + if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) { + netdev_info(adapter->netdev, "%s set to %i\n", + opt->name, *value); + return 0; + } + break; + case list_option:{ + int i; + struct atl1e_opt_list *ent; + + for (i = 0; i < opt->arg.l.nr; i++) { + ent = &opt->arg.l.p[i]; + if (*value == ent->i) { + if (ent->str[0] != '\0') + netdev_info(adapter->netdev, + "%s\n", ent->str); + return 0; + } + } + break; + } + default: + BUG(); + } + + netdev_info(adapter->netdev, "Invalid %s specified (%i) %s\n", + opt->name, *value, opt->err); + *value = opt->def; + return -1; +} + +/* + * atl1e_check_options - Range Checking for Command Line Parameters + * @adapter: board private structure + * + * This routine checks all command line parameters for valid user + * input. If an invalid value is given, or if no user specified + * value exists, a default value is used. The final value is stored + * in a variable in the adapter structure. + */ +void __devinit atl1e_check_options(struct atl1e_adapter *adapter) +{ + int bd = adapter->bd_number; + + if (bd >= ATL1E_MAX_NIC) { + netdev_notice(adapter->netdev, + "no configuration for board #%i\n", bd); + netdev_notice(adapter->netdev, + "Using defaults for all values\n"); + } + + { /* Transmit Ring Size */ + struct atl1e_option opt = { + .type = range_option, + .name = "Transmit Ddescription Count", + .err = "using default of " + __MODULE_STRING(ATL1E_DEFAULT_TX_DESC_CNT), + .def = ATL1E_DEFAULT_TX_DESC_CNT, + .arg = { .r = { .min = ATL1E_MIN_TX_DESC_CNT, + .max = ATL1E_MAX_TX_DESC_CNT} } + }; + int val; + if (num_tx_desc_cnt > bd) { + val = tx_desc_cnt[bd]; + atl1e_validate_option(&val, &opt, adapter); + adapter->tx_ring.count = (u16) val & 0xFFFC; + } else + adapter->tx_ring.count = (u16)opt.def; + } + + { /* Receive Memory Block Count */ + struct atl1e_option opt = { + .type = range_option, + .name = "Memory size of rx buffer(KB)", + .err = "using default of " + __MODULE_STRING(ATL1E_DEFAULT_RX_MEM_SIZE), + .def = ATL1E_DEFAULT_RX_MEM_SIZE, + .arg = { .r = { .min = ATL1E_MIN_RX_MEM_SIZE, + .max = ATL1E_MAX_RX_MEM_SIZE} } + }; + int val; + if (num_rx_mem_size > bd) { + val = rx_mem_size[bd]; + atl1e_validate_option(&val, &opt, adapter); + adapter->rx_ring.page_size = (u32)val * 1024; + } else { + adapter->rx_ring.page_size = (u32)opt.def * 1024; + } + } + + { /* Interrupt Moderate Timer */ + struct atl1e_option opt = { + .type = range_option, + .name = "Interrupt Moderate Timer", + .err = "using default of " + __MODULE_STRING(INT_MOD_DEFAULT_CNT), + .def = INT_MOD_DEFAULT_CNT, + .arg = { .r = { .min = INT_MOD_MIN_CNT, + .max = INT_MOD_MAX_CNT} } + } ; + int val; + if (num_int_mod_timer > bd) { + val = int_mod_timer[bd]; + atl1e_validate_option(&val, &opt, adapter); + adapter->hw.imt = (u16) val; + } else + adapter->hw.imt = (u16)(opt.def); + } + + { /* MediaType */ + struct atl1e_option opt = { + .type = range_option, + .name = "Speed/Duplex Selection", + .err = "using default of " + __MODULE_STRING(MEDIA_TYPE_AUTO_SENSOR), + .def = MEDIA_TYPE_AUTO_SENSOR, + .arg = { .r = { .min = MEDIA_TYPE_AUTO_SENSOR, + .max = MEDIA_TYPE_10M_HALF} } + } ; + int val; + if (num_media_type > bd) { + val = media_type[bd]; + atl1e_validate_option(&val, &opt, adapter); + adapter->hw.media_type = (u16) val; + } else + adapter->hw.media_type = (u16)(opt.def); + + } +} |