diff options
Diffstat (limited to 'drivers/media/platform/s5p-mfc/s5p_mfc_common.h')
| -rw-r--r-- | drivers/media/platform/s5p-mfc/s5p_mfc_common.h | 191 |
1 files changed, 155 insertions, 36 deletions
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h index 519b0d66d8d1..f02e0497ca98 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h @@ -16,13 +16,14 @@ #ifndef S5P_MFC_COMMON_H_ #define S5P_MFC_COMMON_H_ -#include "regs-mfc.h" #include <linux/platform_device.h> #include <linux/videodev2.h> #include <media/v4l2-ctrls.h> #include <media/v4l2-device.h> #include <media/v4l2-ioctl.h> #include <media/videobuf2-core.h> +#include "regs-mfc.h" +#include "regs-mfc-v6.h" /* Definitions related to MFC memory */ @@ -30,17 +31,6 @@ * while mmaping */ #define DST_QUEUE_OFF_BASE (TASK_SIZE / 2) -/* Offset used by the hardware to store addresses */ -#define MFC_OFFSET_SHIFT 11 - -#define FIRMWARE_ALIGN 0x20000 /* 128KB */ -#define MFC_H264_CTX_BUF_SIZE 0x96000 /* 600KB per H264 instance */ -#define MFC_CTX_BUF_SIZE 0x2800 /* 10KB per instance */ -#define DESC_BUF_SIZE 0x20000 /* 128KB for DESC buffer */ -#define SHARED_BUF_SIZE 0x2000 /* 8KB for shared buffer */ - -#define DEF_CPB_SIZE 0x40000 /* 512KB */ - #define MFC_BANK1_ALLOC_CTX 0 #define MFC_BANK2_ALLOC_CTX 1 @@ -74,7 +64,40 @@ static inline dma_addr_t s5p_mfc_mem_cookie(void *a, void *b) #define MFC_ENC_CAP_PLANE_COUNT 1 #define MFC_ENC_OUT_PLANE_COUNT 2 #define STUFF_BYTE 4 -#define MFC_MAX_CTRLS 64 +#define MFC_MAX_CTRLS 70 + +#define S5P_MFC_CODEC_NONE -1 +#define S5P_MFC_CODEC_H264_DEC 0 +#define S5P_MFC_CODEC_H264_MVC_DEC 1 +#define S5P_MFC_CODEC_VC1_DEC 2 +#define S5P_MFC_CODEC_MPEG4_DEC 3 +#define S5P_MFC_CODEC_MPEG2_DEC 4 +#define S5P_MFC_CODEC_H263_DEC 5 +#define S5P_MFC_CODEC_VC1RCV_DEC 6 +#define S5P_MFC_CODEC_VP8_DEC 7 + +#define S5P_MFC_CODEC_H264_ENC 20 +#define S5P_MFC_CODEC_H264_MVC_ENC 21 +#define S5P_MFC_CODEC_MPEG4_ENC 22 +#define S5P_MFC_CODEC_H263_ENC 23 + +#define S5P_MFC_R2H_CMD_EMPTY 0 +#define S5P_MFC_R2H_CMD_SYS_INIT_RET 1 +#define S5P_MFC_R2H_CMD_OPEN_INSTANCE_RET 2 +#define S5P_MFC_R2H_CMD_SEQ_DONE_RET 3 +#define S5P_MFC_R2H_CMD_INIT_BUFFERS_RET 4 +#define S5P_MFC_R2H_CMD_CLOSE_INSTANCE_RET 6 +#define S5P_MFC_R2H_CMD_SLEEP_RET 7 +#define S5P_MFC_R2H_CMD_WAKEUP_RET 8 +#define S5P_MFC_R2H_CMD_COMPLETE_SEQ_RET 9 +#define S5P_MFC_R2H_CMD_DPB_FLUSH_RET 10 +#define S5P_MFC_R2H_CMD_NAL_ABORT_RET 11 +#define S5P_MFC_R2H_CMD_FW_STATUS_RET 12 +#define S5P_MFC_R2H_CMD_FRAME_DONE_RET 13 +#define S5P_MFC_R2H_CMD_FIELD_DONE_RET 14 +#define S5P_MFC_R2H_CMD_SLICE_DONE_RET 15 +#define S5P_MFC_R2H_CMD_ENC_BUFFER_FUL_RET 16 +#define S5P_MFC_R2H_CMD_ERR_RET 32 #define mfc_read(dev, offset) readl(dev->regs_base + (offset)) #define mfc_write(dev, data, offset) writel((data), dev->regs_base + \ @@ -177,6 +200,58 @@ struct s5p_mfc_pm { struct device *device; }; +struct s5p_mfc_buf_size_v5 { + unsigned int h264_ctx; + unsigned int non_h264_ctx; + unsigned int dsc; + unsigned int shm; +}; + +struct s5p_mfc_buf_size_v6 { + unsigned int dev_ctx; + unsigned int h264_dec_ctx; + unsigned int other_dec_ctx; + unsigned int h264_enc_ctx; + unsigned int other_enc_ctx; +}; + +struct s5p_mfc_buf_size { + unsigned int fw; + unsigned int cpb; + void *priv; +}; + +struct s5p_mfc_buf_align { + unsigned int base; +}; + +struct s5p_mfc_variant { + unsigned int version; + unsigned int port_num; + struct s5p_mfc_buf_size *buf_size; + struct s5p_mfc_buf_align *buf_align; + char *mclk_name; + char *fw_name; +}; + +/** + * struct s5p_mfc_priv_buf - represents internal used buffer + * @alloc: allocation-specific context for each buffer + * (videobuf2 allocator) + * @ofs: offset of each buffer, will be used for MFC + * @virt: kernel virtual address, only valid when the + * buffer accessed by driver + * @dma: DMA address, only valid when kernel DMA API used + * @size: size of the buffer + */ +struct s5p_mfc_priv_buf { + void *alloc; + unsigned long ofs; + void *virt; + dma_addr_t dma; + size_t size; +}; + /** * struct s5p_mfc_dev - The struct containing driver internal parameters. * @@ -191,6 +266,7 @@ struct s5p_mfc_pm { * @dec_ctrl_handler: control framework handler for decoding * @enc_ctrl_handler: control framework handler for encoding * @pm: power management control + * @variant: MFC hardware variant information * @num_inst: couter of active MFC instances * @irqlock: lock for operations on videobuf2 queues * @condlock: lock for changing/checking if a context is ready to be @@ -212,6 +288,10 @@ struct s5p_mfc_pm { * @watchdog_work: worker for the watchdog * @alloc_ctx: videobuf2 allocator contexts for two memory banks * @enter_suspend: flag set when entering suspend + * @ctx_buf: common context memory (MFCv6) + * @warn_start: hardware error code from which warnings start + * @mfc_ops: ops structure holding HW operation function pointers + * @mfc_cmds: cmd structure holding HW commands function pointers * */ struct s5p_mfc_dev { @@ -226,6 +306,7 @@ struct s5p_mfc_dev { struct v4l2_ctrl_handler dec_ctrl_handler; struct v4l2_ctrl_handler enc_ctrl_handler; struct s5p_mfc_pm pm; + struct s5p_mfc_variant *variant; int num_inst; spinlock_t irqlock; /* lock when operating on videobuf2 queues */ spinlock_t condlock; /* lock when changing/checking if a context is @@ -248,6 +329,11 @@ struct s5p_mfc_dev { struct work_struct watchdog_work; void *alloc_ctx[2]; unsigned long enter_suspend; + + struct s5p_mfc_priv_buf ctx_buf; + int warn_start; + struct s5p_mfc_hw_ops *mfc_ops; + struct s5p_mfc_hw_cmds *mfc_cmds; }; /** @@ -262,7 +348,6 @@ struct s5p_mfc_h264_enc_params { u8 max_ref_pic; u8 num_ref_pic_4p; int _8x8_transform; - int rc_mb; int rc_mb_dark; int rc_mb_smooth; int rc_mb_static; @@ -281,6 +366,23 @@ struct s5p_mfc_h264_enc_params { enum v4l2_mpeg_video_h264_level level_v4l2; int level; u16 cpb_size; + int interlace; + u8 hier_qp; + u8 hier_qp_type; + u8 hier_qp_layer; + u8 hier_qp_layer_qp[7]; + u8 sei_frame_packing; + u8 sei_fp_curr_frame_0; + u8 sei_fp_arrangement_type; + + u8 fmo; + u8 fmo_map_type; + u8 fmo_slice_grp; + u8 fmo_chg_dir; + u32 fmo_chg_rate; + u32 fmo_run_len[4]; + u8 aso; + u32 aso_slice_order[8]; }; /** @@ -319,9 +421,11 @@ struct s5p_mfc_enc_params { u8 pad_cb; u8 pad_cr; int rc_frame; + int rc_mb; u32 rc_bitrate; u16 rc_reaction_coeff; u16 vbv_size; + u32 vbv_delay; enum v4l2_mpeg_video_header_mode seq_hdr_mode; enum v4l2_mpeg_mfc51_video_frame_skip_mode frame_skip_mode; @@ -330,7 +434,6 @@ struct s5p_mfc_enc_params { u8 num_b_frame; u32 rc_framerate_num; u32 rc_framerate_denom; - int interlace; union { struct s5p_mfc_h264_enc_params h264; @@ -388,6 +491,8 @@ struct s5p_mfc_codec_ops { * decoding buffer * @dpb_flush_flag: flag used to indicate that a DPB buffers are being * flushed + * @head_processed: flag mentioning whether the header data is processed + * completely or not * @bank1_buf: handle to memory allocated for temporary buffers from * memory bank 1 * @bank1_phys: address of the temporary buffers from memory bank 1 @@ -412,19 +517,20 @@ struct s5p_mfc_codec_ops { * @display_delay_enable: display delay for H264 enable flag * @after_packed_pb: flag used to track buffer when stream is in * Packed PB format + * @sei_fp_parse: enable/disable parsing of frame packing SEI information * @dpb_count: count of the DPB buffers required by MFC hw * @total_dpb_count: count of DPB buffers with additional buffers * requested by the application - * @ctx_buf: handle to the memory associated with this context - * @ctx_phys: address of the memory associated with this context - * @ctx_size: size of the memory associated with this context - * @desc_buf: description buffer for decoding handle - * @desc_phys: description buffer for decoding address - * @shm_alloc: handle for the shared memory buffer - * @shm: virtual address for the shared memory buffer - * @shm_ofs: address offset for shared memory + * @ctx: context buffer information + * @dsc: descriptor buffer information + * @shm: shared memory buffer information + * @mv_count: number of MV buffers allocated for decoding * @enc_params: encoding parameters for MFC * @enc_dst_buf_size: size of the buffers for encoder output + * @luma_dpb_size: dpb buffer size for luma + * @chroma_dpb_size: dpb buffer size for chroma + * @me_buffer_size: size of the motion estimation buffer + * @tmv_buffer_size: size of temporal predictor motion vector buffer * @frame_type: used to force the type of the next encoded frame * @ref_queue: list of the reference buffers for encoding * @ref_queue_cnt: number of the buffers in the reference list @@ -473,6 +579,7 @@ struct s5p_mfc_ctx { unsigned long consumed_stream; unsigned int dpb_flush_flag; + unsigned int head_processed; /* Buffers */ void *bank1_buf; @@ -502,37 +609,41 @@ struct s5p_mfc_ctx { int display_delay; int display_delay_enable; int after_packed_pb; + int sei_fp_parse; int dpb_count; int total_dpb_count; - + int mv_count; /* Buffers */ - void *ctx_buf; - size_t ctx_phys; - size_t ctx_ofs; - size_t ctx_size; - - void *desc_buf; - size_t desc_phys; - - - void *shm_alloc; - void *shm; - size_t shm_ofs; + struct s5p_mfc_priv_buf ctx; + struct s5p_mfc_priv_buf dsc; + struct s5p_mfc_priv_buf shm; struct s5p_mfc_enc_params enc_params; size_t enc_dst_buf_size; + size_t luma_dpb_size; + size_t chroma_dpb_size; + size_t me_buffer_size; + size_t tmv_buffer_size; enum v4l2_mpeg_mfc51_video_force_frame_type force_frame_type; struct list_head ref_queue; unsigned int ref_queue_cnt; + enum v4l2_mpeg_video_multi_slice_mode slice_mode; + union { + unsigned int mb; + unsigned int bits; + } slice_size; + struct s5p_mfc_codec_ops *c_ops; struct v4l2_ctrl *ctrls[MFC_MAX_CTRLS]; struct v4l2_ctrl_handler ctrl_handler; + unsigned int frame_tag; + size_t scratch_buf_size; }; /* @@ -565,6 +676,9 @@ struct mfc_control { __u8 is_volatile; }; +/* Macro for making hardware specific calls */ +#define s5p_mfc_hw_call(f, op, args...) \ + ((f && f->op) ? f->op(args) : -ENODEV) #define fh_to_ctx(__fh) container_of(__fh, struct s5p_mfc_ctx, fh) #define ctrl_to_ctx(__ctrl) \ @@ -575,4 +689,9 @@ void set_work_bit(struct s5p_mfc_ctx *ctx); void clear_work_bit_irqsave(struct s5p_mfc_ctx *ctx); void set_work_bit_irqsave(struct s5p_mfc_ctx *ctx); +#define HAS_PORTNUM(dev) (dev ? (dev->variant ? \ + (dev->variant->port_num ? 1 : 0) : 0) : 0) +#define IS_TWOPORT(dev) (dev->variant->port_num == 2 ? 1 : 0) +#define IS_MFCV6(dev) (dev->variant->version >= 0x60 ? 1 : 0) + #endif /* S5P_MFC_COMMON_H_ */ |