summaryrefslogtreecommitdiff
path: root/drivers/input/touchscreen/atmel_mxt_ts.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/input/touchscreen/atmel_mxt_ts.c')
-rw-r--r--drivers/input/touchscreen/atmel_mxt_ts.c366
1 files changed, 198 insertions, 168 deletions
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 03b85711cb70..db178ed2b47e 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -359,7 +359,6 @@ static int mxt_bootloader_read(struct mxt_data *data,
msg.buf = val;
ret = i2c_transfer(data->client->adapter, &msg, 1);
-
if (ret == 1) {
ret = 0;
} else {
@@ -414,6 +413,7 @@ static int mxt_lookup_bootloader_address(struct mxt_data *data, bool retry)
case 0x5b:
bootloader = appmode - 0x26;
break;
+
default:
dev_err(&data->client->dev,
"Appmode i2c address 0x%02x not found\n",
@@ -425,20 +425,20 @@ static int mxt_lookup_bootloader_address(struct mxt_data *data, bool retry)
return 0;
}
-static int mxt_probe_bootloader(struct mxt_data *data, bool retry)
+static int mxt_probe_bootloader(struct mxt_data *data, bool alt_address)
{
struct device *dev = &data->client->dev;
- int ret;
+ int error;
u8 val;
bool crc_failure;
- ret = mxt_lookup_bootloader_address(data, retry);
- if (ret)
- return ret;
+ error = mxt_lookup_bootloader_address(data, alt_address);
+ if (error)
+ return error;
- ret = mxt_bootloader_read(data, &val, 1);
- if (ret)
- return ret;
+ error = mxt_bootloader_read(data, &val, 1);
+ if (error)
+ return error;
/* Check app crc fail mode */
crc_failure = (val & ~MXT_BOOT_STATUS_MASK) == MXT_APP_CRC_FAIL;
@@ -1064,6 +1064,137 @@ static u32 mxt_calculate_crc(u8 *base, off_t start_off, off_t end_off)
return crc;
}
+static int mxt_prepare_cfg_mem(struct mxt_data *data,
+ const struct firmware *cfg,
+ unsigned int data_pos,
+ unsigned int cfg_start_ofs,
+ u8 *config_mem,
+ size_t config_mem_size)
+{
+ struct device *dev = &data->client->dev;
+ struct mxt_object *object;
+ unsigned int type, instance, size, byte_offset;
+ int offset;
+ int ret;
+ int i;
+ u16 reg;
+ u8 val;
+
+ while (data_pos < cfg->size) {
+ /* Read type, instance, length */
+ ret = sscanf(cfg->data + data_pos, "%x %x %x%n",
+ &type, &instance, &size, &offset);
+ if (ret == 0) {
+ /* EOF */
+ break;
+ } else if (ret != 3) {
+ dev_err(dev, "Bad format: failed to parse object\n");
+ return -EINVAL;
+ }
+ data_pos += offset;
+
+ object = mxt_get_object(data, type);
+ if (!object) {
+ /* Skip object */
+ for (i = 0; i < size; i++) {
+ ret = sscanf(cfg->data + data_pos, "%hhx%n",
+ &val, &offset);
+ if (ret != 1) {
+ dev_err(dev, "Bad format in T%d at %d\n",
+ type, i);
+ return -EINVAL;
+ }
+ data_pos += offset;
+ }
+ continue;
+ }
+
+ if (size > mxt_obj_size(object)) {
+ /*
+ * Either we are in fallback mode due to wrong
+ * config or config from a later fw version,
+ * or the file is corrupt or hand-edited.
+ */
+ dev_warn(dev, "Discarding %zu byte(s) in T%u\n",
+ size - mxt_obj_size(object), type);
+ } else if (mxt_obj_size(object) > size) {
+ /*
+ * If firmware is upgraded, new bytes may be added to
+ * end of objects. It is generally forward compatible
+ * to zero these bytes - previous behaviour will be
+ * retained. However this does invalidate the CRC and
+ * will force fallback mode until the configuration is
+ * updated. We warn here but do nothing else - the
+ * malloc has zeroed the entire configuration.
+ */
+ dev_warn(dev, "Zeroing %zu byte(s) in T%d\n",
+ mxt_obj_size(object) - size, type);
+ }
+
+ if (instance >= mxt_obj_instances(object)) {
+ dev_err(dev, "Object instances exceeded!\n");
+ return -EINVAL;
+ }
+
+ reg = object->start_address + mxt_obj_size(object) * instance;
+
+ for (i = 0; i < size; i++) {
+ ret = sscanf(cfg->data + data_pos, "%hhx%n",
+ &val,
+ &offset);
+ if (ret != 1) {
+ dev_err(dev, "Bad format in T%d at %d\n",
+ type, i);
+ return -EINVAL;
+ }
+ data_pos += offset;
+
+ if (i > mxt_obj_size(object))
+ continue;
+
+ byte_offset = reg + i - cfg_start_ofs;
+
+ if (byte_offset >= 0 && byte_offset < config_mem_size) {
+ *(config_mem + byte_offset) = val;
+ } else {
+ dev_err(dev, "Bad object: reg:%d, T%d, ofs=%d\n",
+ reg, object->type, byte_offset);
+ return -EINVAL;
+ }
+ }
+ }
+
+ return 0;
+}
+
+static int mxt_upload_cfg_mem(struct mxt_data *data, unsigned int cfg_start,
+ u8 *config_mem, size_t config_mem_size)
+{
+ unsigned int byte_offset = 0;
+ int error;
+
+ /* Write configuration as blocks */
+ while (byte_offset < config_mem_size) {
+ unsigned int size = config_mem_size - byte_offset;
+
+ if (size > MXT_MAX_BLOCK_WRITE)
+ size = MXT_MAX_BLOCK_WRITE;
+
+ error = __mxt_write_reg(data->client,
+ cfg_start + byte_offset,
+ size, config_mem + byte_offset);
+ if (error) {
+ dev_err(&data->client->dev,
+ "Config write error, ret=%d\n", error);
+ return error;
+ }
+
+ byte_offset += size;
+ }
+
+ return 0;
+}
+
/*
* mxt_update_cfg - download configuration to chip
*
@@ -1087,26 +1218,20 @@ static int mxt_update_cfg(struct mxt_data *data, const struct firmware *cfg)
{
struct device *dev = &data->client->dev;
struct mxt_info cfg_info;
- struct mxt_object *object;
int ret;
int offset;
int data_pos;
- int byte_offset;
int i;
int cfg_start_ofs;
u32 info_crc, config_crc, calculated_crc;
u8 *config_mem;
size_t config_mem_size;
- unsigned int type, instance, size;
- u8 val;
- u16 reg;
mxt_update_crc(data, MXT_COMMAND_REPORTALL, 1);
if (strncmp(cfg->data, MXT_CFG_MAGIC, strlen(MXT_CFG_MAGIC))) {
dev_err(dev, "Unrecognised config file\n");
- ret = -EINVAL;
- goto release;
+ return -EINVAL;
}
data_pos = strlen(MXT_CFG_MAGIC);
@@ -1118,8 +1243,7 @@ static int mxt_update_cfg(struct mxt_data *data, const struct firmware *cfg)
&offset);
if (ret != 1) {
dev_err(dev, "Bad format\n");
- ret = -EINVAL;
- goto release;
+ return -EINVAL;
}
data_pos += offset;
@@ -1127,30 +1251,26 @@ static int mxt_update_cfg(struct mxt_data *data, const struct firmware *cfg)
if (cfg_info.family_id != data->info.family_id) {
dev_err(dev, "Family ID mismatch!\n");
- ret = -EINVAL;
- goto release;
+ return -EINVAL;
}
if (cfg_info.variant_id != data->info.variant_id) {
dev_err(dev, "Variant ID mismatch!\n");
- ret = -EINVAL;
- goto release;
+ return -EINVAL;
}
/* Read CRCs */
ret = sscanf(cfg->data + data_pos, "%x%n", &info_crc, &offset);
if (ret != 1) {
dev_err(dev, "Bad format: failed to parse Info CRC\n");
- ret = -EINVAL;
- goto release;
+ return -EINVAL;
}
data_pos += offset;
ret = sscanf(cfg->data + data_pos, "%x%n", &config_crc, &offset);
if (ret != 1) {
dev_err(dev, "Bad format: failed to parse Config CRC\n");
- ret = -EINVAL;
- goto release;
+ return -EINVAL;
}
data_pos += offset;
@@ -1166,8 +1286,7 @@ static int mxt_update_cfg(struct mxt_data *data, const struct firmware *cfg)
} else if (config_crc == data->config_crc) {
dev_dbg(dev, "Config CRC 0x%06X: OK\n",
data->config_crc);
- ret = 0;
- goto release;
+ return 0;
} else {
dev_info(dev, "Config CRC 0x%06X: does not match file 0x%06X\n",
data->config_crc, config_crc);
@@ -1186,93 +1305,13 @@ static int mxt_update_cfg(struct mxt_data *data, const struct firmware *cfg)
config_mem = kzalloc(config_mem_size, GFP_KERNEL);
if (!config_mem) {
dev_err(dev, "Failed to allocate memory\n");
- ret = -ENOMEM;
- goto release;
+ return -ENOMEM;
}
- while (data_pos < cfg->size) {
- /* Read type, instance, length */
- ret = sscanf(cfg->data + data_pos, "%x %x %x%n",
- &type, &instance, &size, &offset);
- if (ret == 0) {
- /* EOF */
- break;
- } else if (ret != 3) {
- dev_err(dev, "Bad format: failed to parse object\n");
- ret = -EINVAL;
- goto release_mem;
- }
- data_pos += offset;
-
- object = mxt_get_object(data, type);
- if (!object) {
- /* Skip object */
- for (i = 0; i < size; i++) {
- ret = sscanf(cfg->data + data_pos, "%hhx%n",
- &val,
- &offset);
- data_pos += offset;
- }
- continue;
- }
-
- if (size > mxt_obj_size(object)) {
- /*
- * Either we are in fallback mode due to wrong
- * config or config from a later fw version,
- * or the file is corrupt or hand-edited.
- */
- dev_warn(dev, "Discarding %zu byte(s) in T%u\n",
- size - mxt_obj_size(object), type);
- } else if (mxt_obj_size(object) > size) {
- /*
- * If firmware is upgraded, new bytes may be added to
- * end of objects. It is generally forward compatible
- * to zero these bytes - previous behaviour will be
- * retained. However this does invalidate the CRC and
- * will force fallback mode until the configuration is
- * updated. We warn here but do nothing else - the
- * malloc has zeroed the entire configuration.
- */
- dev_warn(dev, "Zeroing %zu byte(s) in T%d\n",
- mxt_obj_size(object) - size, type);
- }
-
- if (instance >= mxt_obj_instances(object)) {
- dev_err(dev, "Object instances exceeded!\n");
- ret = -EINVAL;
- goto release_mem;
- }
-
- reg = object->start_address + mxt_obj_size(object) * instance;
-
- for (i = 0; i < size; i++) {
- ret = sscanf(cfg->data + data_pos, "%hhx%n",
- &val,
- &offset);
- if (ret != 1) {
- dev_err(dev, "Bad format in T%d\n", type);
- ret = -EINVAL;
- goto release_mem;
- }
- data_pos += offset;
-
- if (i > mxt_obj_size(object))
- continue;
-
- byte_offset = reg + i - cfg_start_ofs;
-
- if ((byte_offset >= 0)
- && (byte_offset <= config_mem_size)) {
- *(config_mem + byte_offset) = val;
- } else {
- dev_err(dev, "Bad object: reg:%d, T%d, ofs=%d\n",
- reg, object->type, byte_offset);
- ret = -EINVAL;
- goto release_mem;
- }
- }
- }
+ ret = mxt_prepare_cfg_mem(data, cfg, data_pos, cfg_start_ofs,
+ config_mem, config_mem_size);
+ if (ret)
+ goto release_mem;
/* Calculate crc of the received configs (not the raw config file) */
if (data->T7_address < cfg_start_ofs) {
@@ -1286,28 +1325,14 @@ static int mxt_update_cfg(struct mxt_data *data, const struct firmware *cfg)
data->T7_address - cfg_start_ofs,
config_mem_size);
- if (config_crc > 0 && (config_crc != calculated_crc))
+ if (config_crc > 0 && config_crc != calculated_crc)
dev_warn(dev, "Config CRC error, calculated=%06X, file=%06X\n",
calculated_crc, config_crc);
- /* Write configuration as blocks */
- byte_offset = 0;
- while (byte_offset < config_mem_size) {
- size = config_mem_size - byte_offset;
-
- if (size > MXT_MAX_BLOCK_WRITE)
- size = MXT_MAX_BLOCK_WRITE;
-
- ret = __mxt_write_reg(data->client,
- cfg_start_ofs + byte_offset,
- size, config_mem + byte_offset);
- if (ret != 0) {
- dev_err(dev, "Config write error, ret=%d\n", ret);
- goto release_mem;
- }
-
- byte_offset += size;
- }
+ ret = mxt_upload_cfg_mem(data, cfg_start_ofs,
+ config_mem, config_mem_size);
+ if (ret)
+ goto release_mem;
mxt_update_crc(data, MXT_COMMAND_BACKUPNV, MXT_BACKUP_VALUE);
@@ -1319,8 +1344,6 @@ static int mxt_update_cfg(struct mxt_data *data, const struct firmware *cfg)
release_mem:
kfree(config_mem);
-release:
- release_firmware(cfg);
return ret;
}
@@ -1422,10 +1445,12 @@ static int mxt_get_object_table(struct mxt_data *data)
switch (object->type) {
case MXT_GEN_MESSAGE_T5:
- if (data->info.family_id == 0x80) {
+ if (data->info.family_id == 0x80 &&
+ data->info.version < 0x20) {
/*
- * On mXT224 read and discard unused CRC byte
- * otherwise DMA reads are misaligned
+ * On mXT224 firmware versions prior to V2.0
+ * read and discard unused CRC byte otherwise
+ * DMA reads are misaligned.
*/
data->T5_msg_size = mxt_obj_size(object);
} else {
@@ -1433,6 +1458,7 @@ static int mxt_get_object_table(struct mxt_data *data)
data->T5_msg_size = mxt_obj_size(object) - 1;
}
data->T5_address = object->start_address;
+ break;
case MXT_GEN_COMMAND_T6:
data->T6_reportid = min_id;
data->T6_address = object->start_address;
@@ -1638,46 +1664,45 @@ static int mxt_configure_objects(struct mxt_data *data,
static void mxt_config_cb(const struct firmware *cfg, void *ctx)
{
mxt_configure_objects(ctx, cfg);
+ release_firmware(cfg);
}
static int mxt_initialize(struct mxt_data *data)
{
struct i2c_client *client = data->client;
+ int recovery_attempts = 0;
int error;
- bool alt_bootloader_addr = false;
- bool retry = false;
-retry_info:
- error = mxt_get_info(data);
- if (error) {
-retry_bootloader:
- error = mxt_probe_bootloader(data, alt_bootloader_addr);
+ while (1) {
+ error = mxt_get_info(data);
+ if (!error)
+ break;
+
+ /* Check bootloader state */
+ error = mxt_probe_bootloader(data, false);
if (error) {
- if (alt_bootloader_addr) {
+ dev_info(&client->dev, "Trying alternate bootloader address\n");
+ error = mxt_probe_bootloader(data, true);
+ if (error) {
/* Chip is not in appmode or bootloader mode */
return error;
}
+ }
- dev_info(&client->dev, "Trying alternate bootloader address\n");
- alt_bootloader_addr = true;
- goto retry_bootloader;
- } else {
- if (retry) {
- dev_err(&client->dev, "Could not recover from bootloader mode\n");
- /*
- * We can reflash from this state, so do not
- * abort init
- */
- data->in_bootloader = true;
- return 0;
- }
-
- /* Attempt to exit bootloader into app mode */
- mxt_send_bootloader_cmd(data, false);
- msleep(MXT_FW_RESET_TIME);
- retry = true;
- goto retry_info;
+ /* OK, we are in bootloader, see if we can recover */
+ if (++recovery_attempts > 1) {
+ dev_err(&client->dev, "Could not recover from bootloader mode\n");
+ /*
+ * We can reflash from this state, so do not
+ * abort initialization.
+ */
+ data->in_bootloader = true;
+ return 0;
}
+
+ /* Attempt to exit bootloader into app mode */
+ mxt_send_bootloader_cmd(data, false);
+ msleep(MXT_FW_RESET_TIME);
}
/* Get object table information */
@@ -1687,13 +1712,18 @@ retry_bootloader:
return error;
}
- mxt_acquire_irq(data);
+ error = mxt_acquire_irq(data);
if (error)
goto err_free_object_table;
- request_firmware_nowait(THIS_MODULE, true, MXT_CFG_NAME,
- &data->client->dev, GFP_KERNEL, data,
- mxt_config_cb);
+ error = request_firmware_nowait(THIS_MODULE, true, MXT_CFG_NAME,
+ &client->dev, GFP_KERNEL, data,
+ mxt_config_cb);
+ if (error) {
+ dev_err(&client->dev, "Failed to invoke firmware loader: %d\n",
+ error);
+ goto err_free_object_table;
+ }
return 0;