diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-apollon.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-apollon.c | 285 |
1 files changed, 285 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c new file mode 100644 index 000000000000..6c6ba172cdf6 --- /dev/null +++ b/arch/arm/mach-omap2/board-apollon.c @@ -0,0 +1,285 @@ +/* + * linux/arch/arm/mach-omap/omap2/board-apollon.c + * + * Copyright (C) 2005,2006 Samsung Electronics + * Author: Kyungmin Park <kyungmin.park@samsung.com> + * + * Modified from mach-omap/omap2/board-h4.c + * + * Code for apollon OMAP2 board. Should work on many OMAP2 systems where + * the bootloader passes the board-specific data to the kernel. + * Do not put any board specific code to this file; create a new machine + * type if you need custom low-level initializations. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/onenand.h> +#include <linux/interrupt.h> +#include <linux/delay.h> + +#include <asm/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> + +#include <asm/arch/gpio.h> +#include <asm/arch/mux.h> +#include <asm/arch/usb.h> +#include <asm/arch/board.h> +#include <asm/arch/common.h> +#include "prcm-regs.h" + +/* LED & Switch macros */ +#define LED0_GPIO13 13 +#define LED1_GPIO14 14 +#define LED2_GPIO15 15 +#define SW_ENTER_GPIO16 16 +#define SW_UP_GPIO17 17 +#define SW_DOWN_GPIO58 58 + +static struct mtd_partition apollon_partitions[] = { + { + .name = "X-Loader + U-Boot", + .offset = 0, + .size = SZ_128K, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "params", + .offset = MTDPART_OFS_APPEND, + .size = SZ_128K, + }, + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_2M, + }, + { + .name = "rootfs", + .offset = MTDPART_OFS_APPEND, + .size = SZ_16M, + }, + { + .name = "filesystem00", + .offset = MTDPART_OFS_APPEND, + .size = SZ_32M, + }, + { + .name = "filesystem01", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct flash_platform_data apollon_flash_data = { + .parts = apollon_partitions, + .nr_parts = ARRAY_SIZE(apollon_partitions), +}; + +static struct resource apollon_flash_resource = { + .start = APOLLON_CS0_BASE, + .end = APOLLON_CS0_BASE + SZ_128K, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device apollon_onenand_device = { + .name = "onenand", + .id = -1, + .dev = { + .platform_data = &apollon_flash_data, + }, + .num_resources = ARRAY_SIZE(&apollon_flash_resource), + .resource = &apollon_flash_resource, +}; + +static struct resource apollon_smc91x_resources[] = { + [0] = { + .start = APOLLON_ETHR_START, /* Physical */ + .end = APOLLON_ETHR_START + 0xf, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = OMAP_GPIO_IRQ(APOLLON_ETHR_GPIO_IRQ), + .end = OMAP_GPIO_IRQ(APOLLON_ETHR_GPIO_IRQ), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device apollon_smc91x_device = { + .name = "smc91x", + .id = -1, + .num_resources = ARRAY_SIZE(apollon_smc91x_resources), + .resource = apollon_smc91x_resources, +}; + +static struct platform_device apollon_lcd_device = { + .name = "apollon_lcd", + .id = -1, +}; + +static struct platform_device *apollon_devices[] __initdata = { + &apollon_onenand_device, + &apollon_smc91x_device, + &apollon_lcd_device, +}; + +static inline void __init apollon_init_smc91x(void) +{ + /* Make sure CS1 timings are correct */ + GPMC_CONFIG1_1 = 0x00011203; + GPMC_CONFIG2_1 = 0x001f1f01; + GPMC_CONFIG3_1 = 0x00080803; + GPMC_CONFIG4_1 = 0x1c091c09; + GPMC_CONFIG5_1 = 0x041f1f1f; + GPMC_CONFIG6_1 = 0x000004c4; + GPMC_CONFIG7_1 = 0x00000f40 | (APOLLON_CS1_BASE >> 24); + udelay(100); + + omap_cfg_reg(W4__24XX_GPIO74); + if (omap_request_gpio(APOLLON_ETHR_GPIO_IRQ) < 0) { + printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n", + APOLLON_ETHR_GPIO_IRQ); + return; + } + omap_set_gpio_direction(APOLLON_ETHR_GPIO_IRQ, 1); +} + +static void __init omap_apollon_init_irq(void) +{ + omap2_init_common_hw(); + omap_init_irq(); + omap_gpio_init(); + apollon_init_smc91x(); +} + +static struct omap_uart_config apollon_uart_config __initdata = { + .enabled_uarts = (1 << 0) | (0 << 1) | (0 << 2), +}; + +static struct omap_mmc_config apollon_mmc_config __initdata = { + .mmc [0] = { + .enabled = 0, + .wire4 = 0, + .wp_pin = -1, + .power_pin = -1, + .switch_pin = -1, + }, +}; + +static struct omap_lcd_config apollon_lcd_config __initdata = { + .ctrl_name = "internal", +}; + +static struct omap_board_config_kernel apollon_config[] = { + { OMAP_TAG_UART, &apollon_uart_config }, + { OMAP_TAG_MMC, &apollon_mmc_config }, + { OMAP_TAG_LCD, &apollon_lcd_config }, +}; + +static void __init apollon_led_init(void) +{ + /* LED0 - AA10 */ + omap_cfg_reg(AA10_242X_GPIO13); + omap_request_gpio(LED0_GPIO13); + omap_set_gpio_direction(LED0_GPIO13, 0); + omap_set_gpio_dataout(LED0_GPIO13, 0); + /* LED1 - AA6 */ + omap_cfg_reg(AA6_242X_GPIO14); + omap_request_gpio(LED1_GPIO14); + omap_set_gpio_direction(LED1_GPIO14, 0); + omap_set_gpio_dataout(LED1_GPIO14, 0); + /* LED2 - AA4 */ + omap_cfg_reg(AA4_242X_GPIO15); + omap_request_gpio(LED2_GPIO15); + omap_set_gpio_direction(LED2_GPIO15, 0); + omap_set_gpio_dataout(LED2_GPIO15, 0); +} + +static irqreturn_t apollon_sw_interrupt(int irq, void *ignored, struct pt_regs *regs) +{ + static unsigned int led0, led1, led2; + + if (irq == OMAP_GPIO_IRQ(SW_ENTER_GPIO16)) + omap_set_gpio_dataout(LED0_GPIO13, led0 ^= 1); + else if (irq == OMAP_GPIO_IRQ(SW_UP_GPIO17)) + omap_set_gpio_dataout(LED1_GPIO14, led1 ^= 1); + else if (irq == OMAP_GPIO_IRQ(SW_DOWN_GPIO58)) + omap_set_gpio_dataout(LED2_GPIO15, led2 ^= 1); + + return IRQ_HANDLED; +} + +static void __init apollon_sw_init(void) +{ + /* Enter SW - Y11 */ + omap_cfg_reg(Y11_242X_GPIO16); + omap_request_gpio(SW_ENTER_GPIO16); + omap_set_gpio_direction(SW_ENTER_GPIO16, 1); + /* Up SW - AA12 */ + omap_cfg_reg(AA12_242X_GPIO17); + omap_request_gpio(SW_UP_GPIO17); + omap_set_gpio_direction(SW_UP_GPIO17, 1); + /* Down SW - AA8 */ + omap_cfg_reg(AA8_242X_GPIO58); + omap_request_gpio(SW_DOWN_GPIO58); + omap_set_gpio_direction(SW_DOWN_GPIO58, 1); + + set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQT_RISING); + if (request_irq(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), &apollon_sw_interrupt, + SA_SHIRQ, "enter sw", + &apollon_sw_interrupt)) + return; + set_irq_type(OMAP_GPIO_IRQ(SW_UP_GPIO17), IRQT_RISING); + if (request_irq(OMAP_GPIO_IRQ(SW_UP_GPIO17), &apollon_sw_interrupt, + SA_SHIRQ, "up sw", + &apollon_sw_interrupt)) + return; + set_irq_type(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), IRQT_RISING); + if (request_irq(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), &apollon_sw_interrupt, + SA_SHIRQ, "down sw", + &apollon_sw_interrupt)) + return; +} + +static void __init omap_apollon_init(void) +{ + apollon_led_init(); + apollon_sw_init(); + + /* REVISIT: where's the correct place */ + omap_cfg_reg(W19_24XX_SYS_NIRQ); + + /* + * Make sure the serial ports are muxed on at this point. + * You have to mux them off in device drivers later on + * if not needed. + */ + platform_add_devices(apollon_devices, ARRAY_SIZE(apollon_devices)); + omap_board_config = apollon_config; + omap_board_config_size = ARRAY_SIZE(apollon_config); + omap_serial_init(); +} + +static void __init omap_apollon_map_io(void) +{ + omap2_map_common_io(); +} + +MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon") + /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */ + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap_apollon_map_io, + .init_irq = omap_apollon_init_irq, + .init_machine = omap_apollon_init, + .timer = &omap_timer, +MACHINE_END |