diff options
| -rw-r--r-- | arch/sparc/kernel/sun4m_smp.c | 2 | ||||
| -rw-r--r-- | arch/sparc64/defconfig | 71 | ||||
| -rw-r--r-- | arch/sparc64/kernel/Makefile | 2 | ||||
| -rw-r--r-- | arch/sparc64/kernel/central.c | 6 | ||||
| -rw-r--r-- | arch/sparc64/kernel/irq.c | 16 | ||||
| -rw-r--r-- | arch/sparc64/kernel/pci.c | 37 | ||||
| -rw-r--r-- | arch/sparc64/kernel/pci_fire.c | 418 | ||||
| -rw-r--r-- | arch/sparc64/kernel/pci_iommu.c | 22 | ||||
| -rw-r--r-- | arch/sparc64/kernel/prom.c | 112 | ||||
| -rw-r--r-- | drivers/scsi/sun_esp.c | 1 | ||||
| -rw-r--r-- | drivers/serial/sunsu.c | 8 | ||||
| -rw-r--r-- | drivers/video/Kconfig | 26 | ||||
| -rw-r--r-- | drivers/video/Makefile | 2 | ||||
| -rw-r--r-- | drivers/video/sunxvr2500.c | 277 | ||||
| -rw-r--r-- | drivers/video/sunxvr500.c | 443 | ||||
| -rw-r--r-- | include/asm-sparc64/iommu.h | 1 | ||||
| -rw-r--r-- | mm/sparse.c | 2 |
17 files changed, 1365 insertions, 81 deletions
diff --git a/arch/sparc/kernel/sun4m_smp.c b/arch/sparc/kernel/sun4m_smp.c index e2d9c018bd56..4e07bdbbfb5d 100644 --- a/arch/sparc/kernel/sun4m_smp.c +++ b/arch/sparc/kernel/sun4m_smp.c @@ -405,7 +405,7 @@ void __init smp4m_blackbox_current(unsigned *addr) addr[0] = 0x81580000 | rd; /* rd %tbr, reg */ addr[2] = 0x8130200a | rd | rs1; /* srl reg, 0xa, reg */ - addr[4] = 0x8008200c | rd | rs1; /* and reg, 3, reg */ + addr[4] = 0x8008200c | rd | rs1; /* and reg, 0xc, reg */ } void __init sun4m_init_smp(void) diff --git a/arch/sparc64/defconfig b/arch/sparc64/defconfig index 120c9c33b7a6..37c2d3695658 100644 --- a/arch/sparc64/defconfig +++ b/arch/sparc64/defconfig @@ -1,15 +1,16 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21-rc4 -# Sat Mar 17 14:18:44 2007 +# Linux kernel version: 2.6.21 +# Sun May 6 22:46:54 2007 # CONFIG_SPARC=y CONFIG_SPARC64=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_64BIT=y CONFIG_MMU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TIME_INTERPOLATION=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set @@ -108,6 +109,9 @@ CONFIG_GENERIC_HARDIRQS=y # # General machine setup # +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y # CONFIG_SMP is not set CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=m @@ -140,8 +144,7 @@ CONFIG_SELECT_MEMORY_MODEL=y CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y CONFIG_HAVE_MEMORY_PRESENT=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPARSEMEM_EXTREME=y +CONFIG_SPARSEMEM_STATIC=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=0 @@ -151,6 +154,7 @@ CONFIG_SUN_AUXIO=y CONFIG_SUN_IO=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y +CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y # CONFIG_PCI_DEBUG is not set CONFIG_SUN_OPENPROMFS=m @@ -178,7 +182,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -219,6 +222,7 @@ CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y CONFIG_IPV6_ROUTE_INFO=y +CONFIG_IPV6_OPTIMISTIC_DAD=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m @@ -292,6 +296,14 @@ CONFIG_NET_TCPPROBE=m # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # @@ -312,10 +324,6 @@ CONFIG_FW_LOADER=y # Connector - unified userspace <-> kernelspace linker # CONFIG_CONNECTOR=m - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set # @@ -383,7 +391,6 @@ CONFIG_BLK_DEV_IDEPCI=y # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y CONFIG_IDEDMA_ONLYDISK=y # CONFIG_BLK_DEV_AEC62XX is not set CONFIG_BLK_DEV_ALI15X3=y @@ -413,7 +420,6 @@ CONFIG_BLK_DEV_ALI15X3=y # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set -CONFIG_IDEDMA_AUTO=y # CONFIG_BLK_DEV_HD is not set # @@ -443,6 +449,7 @@ CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -485,6 +492,7 @@ CONFIG_ISCSI_TCP=m # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_ESP_CORE is not set # CONFIG_SCSI_SUNESP is not set # CONFIG_SCSI_SRP is not set @@ -628,9 +636,10 @@ CONFIG_BNX2=m # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) +# Wireless LAN # -# CONFIG_NET_RADIO is not set +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # # Wan interfaces @@ -695,6 +704,12 @@ CONFIG_KEYBOARD_LKKBD=m # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=y # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set @@ -702,6 +717,7 @@ CONFIG_MOUSE_SERIAL=y CONFIG_INPUT_MISC=y CONFIG_INPUT_SPARCSPKR=y # CONFIG_INPUT_UINPUT is not set +# CONFIG_INPUT_POLLDEV is not set # # Hardware I/O ports @@ -763,11 +779,8 @@ CONFIG_RTC=y # TPM devices # # CONFIG_TCG_TPM is not set - -# -# I2C support -# CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_CHARDEV is not set # @@ -791,17 +804,17 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PASEMI is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set # # Miscellaneous I2C Chip support @@ -912,7 +925,7 @@ CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # -# Frambuffer hardware drivers +# Frame buffer hardware drivers # # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set @@ -937,6 +950,8 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set +# CONFIG_FB_XVR500 is not set +# CONFIG_FB_XVR2500 is not set # CONFIG_FB_PCI is not set # CONFIG_FB_VIRTUAL is not set @@ -1094,6 +1109,14 @@ CONFIG_HID=y # CONFIG_HID_DEBUG is not set # +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +CONFIG_USB_HIDDEV=y + +# # USB support # CONFIG_USB_ARCH_HAS_HCD=y @@ -1106,6 +1129,7 @@ CONFIG_USB=y # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set @@ -1156,10 +1180,6 @@ CONFIG_USB_STORAGE=m # # USB Input Devices # -CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -CONFIG_USB_HIDDEV=y # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set # CONFIG_USB_ACECAD is not set @@ -1524,6 +1544,7 @@ CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_LRW=m +# CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m diff --git a/arch/sparc64/kernel/Makefile b/arch/sparc64/kernel/Makefile index eff0c01d3579..6bf6fb65bc20 100644 --- a/arch/sparc64/kernel/Makefile +++ b/arch/sparc64/kernel/Makefile @@ -17,7 +17,7 @@ obj-y := process.o setup.o cpu.o idprom.o \ obj-$(CONFIG_STACKTRACE) += stacktrace.o obj-$(CONFIG_PCI) += ebus.o isa.o pci_common.o pci_iommu.o \ pci_psycho.o pci_sabre.o pci_schizo.o \ - pci_sun4v.o pci_sun4v_asm.o + pci_sun4v.o pci_sun4v_asm.o pci_fire.o obj-$(CONFIG_SMP) += smp.o trampoline.o obj-$(CONFIG_SPARC32_COMPAT) += sys32.o sys_sparc32.o signal32.o obj-$(CONFIG_BINFMT_ELF32) += binfmt_elf32.o diff --git a/arch/sparc64/kernel/central.c b/arch/sparc64/kernel/central.c index c65b2f9c98d8..8230099f0d8a 100644 --- a/arch/sparc64/kernel/central.c +++ b/arch/sparc64/kernel/central.c @@ -98,7 +98,7 @@ void apply_central_ranges(struct linux_central *central, central->num_central_ranges); } -void * __init central_alloc_bootmem(unsigned long size) +static void * __init central_alloc_bootmem(unsigned long size) { void *ret; @@ -116,7 +116,7 @@ static unsigned long prom_reg_to_paddr(struct linux_prom_registers *r) return ret | (unsigned long) r->phys_addr; } -static void probe_other_fhcs(void) +static void __init probe_other_fhcs(void) { struct device_node *dp; const struct linux_prom64_registers *fpregs; @@ -298,7 +298,7 @@ static void init_all_fhc_hw(void) } -void central_probe(void) +void __init central_probe(void) { struct linux_prom_registers fpregs[6]; const struct linux_prom_registers *pr; diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c index 6241e3dbbd57..3edc18e1b818 100644 --- a/arch/sparc64/kernel/irq.c +++ b/arch/sparc64/kernel/irq.c @@ -279,7 +279,7 @@ static void sun4u_irq_enable(unsigned int virt_irq) struct irq_handler_data *data = get_irq_chip_data(virt_irq); if (likely(data)) { - unsigned long cpuid, imap; + unsigned long cpuid, imap, val; unsigned int tid; cpuid = irq_choose_cpu(virt_irq); @@ -287,7 +287,11 @@ static void sun4u_irq_enable(unsigned int virt_irq) tid = sun4u_compute_tid(imap, cpuid); - upa_writel(tid | IMAP_VALID, imap); + val = upa_readq(imap); + val &= ~(IMAP_TID_UPA | IMAP_TID_JBUS | + IMAP_AID_SAFARI | IMAP_NID_SAFARI); + val |= tid | IMAP_VALID; + upa_writeq(val, imap); } } @@ -297,10 +301,10 @@ static void sun4u_irq_disable(unsigned int virt_irq) if (likely(data)) { unsigned long imap = data->imap; - u32 tmp = upa_readl(imap); + u32 tmp = upa_readq(imap); tmp &= ~IMAP_VALID; - upa_writel(tmp, imap); + upa_writeq(tmp, imap); } } @@ -309,7 +313,7 @@ static void sun4u_irq_end(unsigned int virt_irq) struct irq_handler_data *data = get_irq_chip_data(virt_irq); if (likely(data)) - upa_writel(ICLR_IDLE, data->iclr); + upa_writeq(ICLR_IDLE, data->iclr); } static void sun4v_irq_enable(unsigned int virt_irq) @@ -465,7 +469,7 @@ unsigned int build_irq(int inofixup, unsigned long iclr, unsigned long imap) BUG_ON(tlb_type == hypervisor); - ino = (upa_readl(imap) & (IMAP_IGN | IMAP_INO)) + inofixup; + ino = (upa_readq(imap) & (IMAP_IGN | IMAP_INO)) + inofixup; bucket = &ivector_table[ino]; if (!bucket->virt_irq) { bucket->virt_irq = virt_irq_alloc(__irq(bucket)); diff --git a/arch/sparc64/kernel/pci.c b/arch/sparc64/kernel/pci.c index 9a549547cb2b..af2c7ff01eeb 100644 --- a/arch/sparc64/kernel/pci.c +++ b/arch/sparc64/kernel/pci.c @@ -190,6 +190,7 @@ extern void schizo_init(struct device_node *, const char *); extern void schizo_plus_init(struct device_node *, const char *); extern void tomatillo_init(struct device_node *, const char *); extern void sun4v_pci_init(struct device_node *, const char *); +extern void fire_pci_init(struct device_node *, const char *); static struct { char *model_name; @@ -207,6 +208,7 @@ static struct { { "SUNW,tomatillo", tomatillo_init }, { "pci108e,a801", tomatillo_init }, { "SUNW,sun4v-pci", sun4v_pci_init }, + { "pciex108e,80f0", fire_pci_init }, }; #define PCI_NUM_CONTROLLER_TYPES (sizeof(pci_controller_table) / \ sizeof(pci_controller_table[0])) @@ -436,6 +438,13 @@ struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm, printk(" class: 0x%x device name: %s\n", dev->class, pci_name(dev)); + /* I have seen IDE devices which will not respond to + * the bmdma simplex check reads if bus mastering is + * disabled. + */ + if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE) + pci_set_master(dev); + dev->current_state = 4; /* unknown power state */ dev->error_state = pci_channel_io_normal; @@ -468,7 +477,7 @@ struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm, return dev; } -static void __init apb_calc_first_last(u8 map, u32 *first_p, u32 *last_p) +static void __devinit apb_calc_first_last(u8 map, u32 *first_p, u32 *last_p) { u32 idx, first, last; @@ -497,9 +506,9 @@ static void __init pci_resource_adjust(struct resource *res, /* Cook up fake bus resources for SUNW,simba PCI bridges which lack * a proper 'ranges' property. */ -static void __init apb_fake_ranges(struct pci_dev *dev, - struct pci_bus *bus, - struct pci_pbm_info *pbm) +static void __devinit apb_fake_ranges(struct pci_dev *dev, + struct pci_bus *bus, + struct pci_pbm_info *pbm) { struct resource *res; u32 first, last; @@ -522,15 +531,15 @@ static void __init apb_fake_ranges(struct pci_dev *dev, pci_resource_adjust(res, &pbm->mem_space); } -static void __init pci_of_scan_bus(struct pci_pbm_info *pbm, - struct device_node *node, - struct pci_bus *bus); +static void __devinit pci_of_scan_bus(struct pci_pbm_info *pbm, + struct device_node *node, + struct pci_bus *bus); #define GET_64BIT(prop, i) ((((u64) (prop)[(i)]) << 32) | (prop)[(i)+1]) -void __devinit of_scan_pci_bridge(struct pci_pbm_info *pbm, - struct device_node *node, - struct pci_dev *dev) +static void __devinit of_scan_pci_bridge(struct pci_pbm_info *pbm, + struct device_node *node, + struct pci_dev *dev) { struct pci_bus *bus; const u32 *busrange, *ranges; @@ -629,9 +638,9 @@ simba_cont: pci_of_scan_bus(pbm, node, bus); } -static void __init pci_of_scan_bus(struct pci_pbm_info *pbm, - struct device_node *node, - struct pci_bus *bus) +static void __devinit pci_of_scan_bus(struct pci_pbm_info *pbm, + struct device_node *node, + struct pci_bus *bus) { struct device_node *child; const u32 *reg; @@ -733,7 +742,7 @@ int pci_host_bridge_write_pci_cfg(struct pci_bus *bus_dev, return PCIBIOS_SUCCESSFUL; } -struct pci_bus * __init pci_scan_one_pbm(struct pci_pbm_info *pbm) +struct pci_bus * __devinit pci_scan_one_pbm(struct pci_pbm_info *pbm) { struct pci_controller_info *p = pbm->parent; struct device_node *node = pbm->prom_node; diff --git a/arch/sparc64/kernel/pci_fire.c b/arch/sparc64/kernel/pci_fire.c new file mode 100644 index 000000000000..0fe626631e12 --- /dev/null +++ b/arch/sparc64/kernel/pci_fire.c @@ -0,0 +1,418 @@ +/* pci_fire.c: Sun4u platform PCI-E controller support. + * + * Copyright (C) 2007 David S. Miller (davem@davemloft.net) + */ +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/slab.h> +#include <linux/init.h> + +#include <asm/pbm.h> +#include <asm/oplib.h> +#include <asm/prom.h> + +#include "pci_impl.h" + +#define fire_read(__reg) \ +({ u64 __ret; \ + __asm__ __volatile__("ldxa [%1] %2, %0" \ + : "=r" (__ret) \ + : "r" (__reg), "i" (ASI_PHYS_BYPASS_EC_E) \ + : "memory"); \ + __ret; \ +}) +#define fire_write(__reg, __val) \ + __asm__ __volatile__("stxa %0, [%1] %2" \ + : /* no outputs */ \ + : "r" (__val), "r" (__reg), \ + "i" (ASI_PHYS_BYPASS_EC_E) \ + : "memory") + +/* Fire config space address format is nearly identical to + * that of SCHIZO and PSYCHO, except that in order to accomodate + * PCI-E extended config space the encoding can handle 12 bits + * of register address: + * + * 32 28 27 20 19 15 14 12 11 2 1 0 + * ------------------------------------------------- + * |0 0 0 0 0| bus | device | function | reg | 0 0 | + * ------------------------------------------------- + */ +#define FIRE_CONFIG_BASE(PBM) ((PBM)->config_space) +#define FIRE_CONFIG_ENCODE(BUS, DEVFN, REG) \ + (((unsigned long)(BUS) << 20) | \ + ((unsigned long)(DEVFN) << 12) | \ + ((unsigned long)(REG))) + +static void *fire_pci_config_mkaddr(struct pci_pbm_info *pbm, + unsigned char bus, + unsigned int devfn, + int where) +{ + if (!pbm) + return NULL; + return (void *) + (FIRE_CONFIG_BASE(pbm) | + FIRE_CONFIG_ENCODE(bus, devfn, where)); +} + +/* FIRE PCI configuration space accessors. */ + +static int fire_read_pci_cfg(struct pci_bus *bus_dev, unsigned int devfn, + int where, int size, u32 *value) +{ + struct pci_pbm_info *pbm = bus_dev->sysdata; + unsigned char bus = bus_dev->number; + u32 *addr; + u16 tmp16; + u8 tmp8; + + if (bus_dev == pbm->pci_bus && devfn == 0x00) + return pci_host_bridge_read_pci_cfg(bus_dev, devfn, where, + size, value); + switch (size) { + case 1: + *value = 0xff; + break; + case 2: + *value = 0xffff; + break; + case 4: + *value = 0xffffffff; + break; + } + + addr = fire_pci_config_mkaddr(pbm, bus, devfn, where); + if (!addr) + return PCIBIOS_SUCCESSFUL; + + switch (size) { + case 1: + pci_config_read8((u8 *)addr, &tmp8); + *value = tmp8; + break; + + case 2: + if (where & 0x01) { + printk("pci_read_config_word: misaligned reg [%x]\n", + where); + return PCIBIOS_SUCCESSFUL; + } + pci_config_read16((u16 *)addr, &tmp16); + *value = tmp16; + break; + + case 4: + if (where & 0x03) { + printk("pci_read_config_dword: misaligned reg [%x]\n", + where); + return PCIBIOS_SUCCESSFUL; + } + + pci_config_read32(addr, value); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static int fire_write_pci_cfg(struct pci_bus *bus_dev, unsigned int devfn, + int where, int size, u32 value) +{ + struct pci_pbm_info *pbm = bus_dev->sysdata; + unsigned char bus = bus_dev->number; + u32 *addr; + + if (bus_dev == pbm->pci_bus && devfn == 0x00) + return pci_host_bridge_write_pci_cfg(bus_dev, devfn, where, + size, value); + addr = fire_pci_config_mkaddr(pbm, bus, devfn, where); + if (!addr) + return PCIBIOS_SUCCESSFUL; + + switch (size) { + case 1: + pci_config_write8((u8 *)addr, value); + break; + + case 2: + if (where & 0x01) { + printk("pci_write_config_word: misaligned reg [%x]\n", + where); + return PCIBIOS_SUCCESSFUL; + } + pci_config_write16((u16 *)addr, value); + break; + + case 4: + if (where & 0x03) { + printk("pci_write_config_dword: misaligned reg [%x]\n", + where); + return PCIBIOS_SUCCESSFUL; + } + + pci_config_write32(addr, value); + } + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops pci_fire_ops = { + .read = fire_read_pci_cfg, + .write = fire_write_pci_cfg, +}; + +static void pbm_scan_bus(struct pci_controller_info *p, + struct pci_pbm_info *pbm) +{ + pbm->pci_bus = pci_scan_one_pbm(pbm); +} + +static void pci_fire_scan_bus(struct pci_controller_info *p) +{ + struct device_node *dp; + + if ((dp = p->pbm_A.prom_node) != NULL) + pbm_scan_bus(p, &p->pbm_A); + + if ((dp = p->pbm_B.prom_node) != NULL) + pbm_scan_bus(p, &p->pbm_B); + + /* XXX register error interrupt handlers XXX */ +} + +#define FIRE_IOMMU_CONTROL 0x40000UL +#define FIRE_IOMMU_TSBBASE 0x40008UL +#define FIRE_IOMMU_FLUSH 0x40100UL +#define FIRE_IOMMU_FLUSHINV 0x40100UL + +static void pci_fire_pbm_iommu_init(struct pci_pbm_info *pbm) +{ + struct iommu *iommu = pbm->iommu; + u32 vdma[2], dma_mask; + u64 control; + int tsbsize; + + /* No virtual-dma property on these guys, use largest size. */ + vdma[0] = 0xc0000000; /* base */ + vdma[1] = 0x40000000; /* size */ + dma_mask = 0xffffffff; + tsbsize = 128; + + /* Register addresses. */ + iommu->iommu_control = pbm->pbm_regs + FIRE_IOMMU_CONTROL; + iommu->iommu_tsbbase = pbm->pbm_regs + FIRE_IOMMU_TSBBASE; + iommu->iommu_flush = pbm->pbm_regs + FIRE_IOMMU_FLUSH; + iommu->iommu_flushinv = pbm->pbm_regs + FIRE_IOMMU_FLUSHINV; + + /* We use the main control/status register of FIRE as the write + * completion register. + */ + iommu->write_complete_reg = pbm->controller_regs + 0x410000UL; + + /* + * Invalidate TLB Entries. + */ + fire_write(iommu->iommu_flushinv, ~(u64)0); + + pci_iommu_table_init(iommu, tsbsize * 8 * 1024, vdma[0], dma_mask); + + fire_write(iommu->iommu_tsbbase, __pa(iommu->page_table) | 0x7UL); + + control = fire_read(iommu->iommu_control); + control |= (0x00000400 /* TSB cache snoop enable */ | + 0x00000300 /* Cache mode */ | + 0x00000002 /* Bypass enable */ | + 0x00000001 /* Translation enable */); + fire_write(iommu->iommu_control, control); +} + +/* Based at pbm->controller_regs */ +#define FIRE_PARITY_CONTROL 0x470010UL +#define FIRE_PARITY_ENAB 0x8000000000000000UL +#define FIRE_FATAL_RESET_CTL 0x471028UL +#define FIRE_FATAL_RESET_SPARE 0x0000000004000000UL +#define FIRE_FATAL_RESET_MB 0x0000000002000000UL +#define FIRE_FATAL_RESET_CPE 0x0000000000008000UL +#define FIRE_FATAL_RESET_APE 0x0000000000004000UL +#define FIRE_FATAL_RESET_PIO 0x0000000000000040UL +#define FIRE_FATAL_RESET_JW 0x0000000000000004UL +#define FIRE_FATAL_RESET_JI 0x0000000000000002UL +#define FIRE_FATAL_RESET_JR 0x0000000000000001UL +#define FIRE_CORE_INTR_ENABLE 0x471800UL + +/* Based at pbm->pbm_regs */ +#define FIRE_TLU_CTRL 0x80000UL +#define FIRE_TLU_CTRL_TIM 0x00000000da000000UL +#define FIRE_TLU_CTRL_QDET 0x0000000000000100UL +#define FIRE_TLU_CTRL_CFG 0x0000000000000001UL +#define FIRE_TLU_DEV_CTRL 0x90008UL +#define FIRE_TLU_LINK_CTRL 0x90020UL +#define FIRE_TLU_LINK_CTRL_CLK 0x0000000000000040UL +#define FIRE_LPU_RESET 0xe2008UL +#define FIRE_LPU_LLCFG 0xe2200UL +#define FIRE_LPU_LLCFG_VC0 0x0000000000000100UL +#define FIRE_LPU_FCTRL_UCTRL 0xe2240UL +#define FIRE_LPU_FCTRL_UCTRL_N 0x0000000000000002UL +#define FIRE_LPU_FCTRL_UCTRL_P 0x0000000000000001UL +#define FIRE_LPU_TXL_FIFOP 0xe2430UL +#define FIRE_LPU_LTSSM_CFG2 0xe2788UL +#define FIRE_LPU_LTSSM_CFG3 0xe2790UL +#define FIRE_LPU_LTSSM_CFG4 0xe2798UL +#define FIRE_LPU_LTSSM_CFG5 0xe27a0UL +#define FIRE_DMC_IENAB 0x31800UL +#define FIRE_DMC_DBG_SEL_A 0x53000UL +#define FIRE_DMC_DBG_SEL_B 0x53008UL +#define FIRE_PEC_IENAB 0x51800UL + +static void pci_fire_hw_init(struct pci_pbm_info *pbm) +{ + u64 val; + + fire_write(pbm->controller_regs + FIRE_PARITY_CONTROL, + FIRE_PARITY_ENAB); + + fire_write(pbm->controller_regs + FIRE_FATAL_RESET_CTL, + (FIRE_FATAL_RESET_SPARE | + FIRE_FATAL_RESET_MB | + FIRE_FATAL_RESET_CPE | + FIRE_FATAL_RESET_APE | + FIRE_FATAL_RESET_PIO | + FIRE_FATAL_RESET_JW | + FIRE_FATAL_RESET_JI | + FIRE_FATAL_RESET_JR)); + + fire_write(pbm->controller_regs + FIRE_CORE_INTR_ENABLE, ~(u64)0); + + val = fire_read(pbm->pbm_regs + FIRE_TLU_CTRL); + val |= (FIRE_TLU_CTRL_TIM | + FIRE_TLU_CTRL_QDET | + FIRE_TLU_CTRL_CFG); + fire_write(pbm->pbm_regs + FIRE_TLU_CTRL, val); + fire_write(pbm->pbm_regs + FIRE_TLU_DEV_CTRL, 0); + fire_write(pbm->pbm_regs + FIRE_TLU_LINK_CTRL, + FIRE_TLU_LINK_CTRL_CLK); + + fire_write(pbm->pbm_regs + FIRE_LPU_RESET, 0); + fire_write(pbm->pbm_regs + FIRE_LPU_LLCFG, + FIRE_LPU_LLCFG_VC0); + fire_write(pbm->pbm_regs + FIRE_LPU_FCTRL_UCTRL, + (FIRE_LPU_FCTRL_UCTRL_N | + FIRE_LPU_FCTRL_UCTRL_P)); + fire_write(pbm->pbm_regs + FIRE_LPU_TXL_FIFOP, + ((0xffff << 16) | (0x0000 << 0))); + fire_write(pbm->pbm_regs + FIRE_LPU_LTSSM_CFG2, 3000000); + fire_write(pbm->pbm_regs + FIRE_LPU_LTSSM_CFG3, 500000); + fire_write(pbm->pbm_regs + FIRE_LPU_LTSSM_CFG4, + (2 << 16) | (140 << 8)); + fire_write(pbm->pbm_regs + FIRE_LPU_LTSSM_CFG5, 0); + + fire_write(pbm->pbm_regs + FIRE_DMC_IENAB, ~(u64)0); + fire_write(pbm->pbm_regs + FIRE_DMC_DBG_SEL_A, 0); + fire_write(pbm->pbm_regs + FIRE_DMC_DBG_SEL_B, 0); + + fire_write(pbm->pbm_regs + FIRE_PEC_IENAB, ~(u64)0); +} + +static void pci_fire_pbm_init(struct pci_controller_info *p, + struct device_node *dp, u32 portid) +{ + const struct linux_prom64_registers *regs; + struct pci_pbm_info *pbm; + const u32 *ino_bitmap; + const unsigned int *busrange; + + if ((portid & 1) == 0) + pbm = &p->pbm_A; + else + pbm = &p->pbm_B; + + pbm->portid = portid; + pbm->parent = p; + pbm->prom_node = dp; + pbm->name = dp->full_name; + + regs = of_get_property(dp, "reg", NULL); + pbm->pbm_regs = regs[0].phys_addr; + pbm->controller_regs = regs[1].phys_addr - 0x410000UL; + + printk("%s: SUN4U PCIE Bus Module\n", pbm->name); + + pci_determine_mem_io_space(pbm); + + ino_bitmap = of_get_property(dp, "ino-bitmap", NULL); + pbm->ino_bitmap = (((u64)ino_bitmap[1] << 32UL) | + ((u64)ino_bitmap[0] << 0UL)); + + busrange = of_get_property(dp, "bus-range", NULL); + pbm->pci_first_busno = busrange[0]; + pbm->pci_last_busno = busrange[1]; + + pci_fire_hw_init(pbm); + pci_fire_pbm_iommu_init(pbm); +} + +static inline int portid_compare(u32 x, u32 y) +{ + if (x == (y ^ 1)) + return 1; + return 0; +} + +void fire_pci_init(struct device_node *dp, const char *model_name) +{ + struct pci_controller_info *p; + u32 portid = of_getintprop_default(dp, "portid", 0xff); + struct iommu *iommu; + + for (p = pci_controller_root; p; p = p->next) { + struct pci_pbm_info *pbm; + + if (p->pbm_A.prom_node && p->pbm_B.prom_node) + continue; + + pbm = (p->pbm_A.prom_node ? + &p->pbm_A : + &p->pbm_B); + + if (portid_compare(pbm->portid, portid)) { + pci_fire_pbm_init(p, dp, portid); + return; + } + } + + p = kzalloc(sizeof(struct pci_controller_info), GFP_ATOMIC); + if (!p) + goto fatal_memory_error; + + iommu = kzalloc(sizeof(struct iommu), GFP_ATOMIC); + if (!iommu) + goto fatal_memory_error; + + p->pbm_A.iommu = iommu; + + iommu = kzalloc(sizeof(struct iommu), GFP_ATOMIC); + if (!iommu) + goto fatal_memory_error; + + p->pbm_B.iommu = iommu; + + p->next = pci_controller_root; + pci_controller_root = p; + + p->index = pci_num_controllers++; + + p->scan_bus = pci_fire_scan_bus; + /* XXX MSI support XXX */ + p->pci_ops = &pci_fire_ops; + + /* Like PSYCHO and SCHIZO we have a 2GB aligned area + * for memory space. + */ + pci_memspace_mask = 0x7fffffffUL; + + pci_fire_pbm_init(p, dp, portid); + return; + +fatal_memory_error: + prom_printf("PCI_FIRE: Fatal memory allocation error.\n"); + prom_halt(); +} diff --git a/arch/sparc64/kernel/pci_iommu.c b/arch/sparc64/kernel/pci_iommu.c index 66712772f494..9e405cbbcb0d 100644 --- a/arch/sparc64/kernel/pci_iommu.c +++ b/arch/sparc64/kernel/pci_iommu.c @@ -37,17 +37,21 @@ /* Must be invoked under the IOMMU lock. */ static void __iommu_flushall(struct iommu *iommu) { - unsigned long tag; - int entry; + if (iommu->iommu_flushinv) { + pci_iommu_write(iommu->iommu_flushinv, ~(u64)0); + } else { + unsigned long tag; + int entry; - tag = iommu->iommu_flush + (0xa580UL - 0x0210UL); - for (entry = 0; entry < 16; entry++) { - pci_iommu_write(tag, 0); - tag += 8; - } + tag = iommu->iommu_flush + (0xa580UL - 0x0210UL); + for (entry = 0; entry < 16; entry++) { + pci_iommu_write(tag, 0); + tag += 8; + } - /* Ensure completion of previous PIO writes. */ - (void) pci_iommu_read(iommu->write_complete_reg); + /* Ensure completion of previous PIO writes. */ + (void) pci_iommu_read(iommu->write_complete_reg); + } } #define IOPTE_CONSISTENT(CTX) \ diff --git a/arch/sparc64/kernel/prom.c b/arch/sparc64/kernel/prom.c index 5e1fcd05160d..c54d4d8af014 100644 --- a/arch/sparc64/kernel/prom.c +++ b/arch/sparc64/kernel/prom.c @@ -386,11 +386,9 @@ static unsigned int psycho_irq_build(struct device_node *dp, /* Now build the IRQ bucket. */ imap = controller_regs + imap_off; - imap += 4; iclr_off = psycho_iclr_offset(ino); iclr = controller_regs + iclr_off; - iclr += 4; if ((ino & 0x20) == 0) inofixup = ino & 0x03; @@ -398,7 +396,7 @@ static unsigned int psycho_irq_build(struct device_node *dp, return build_irq(inofixup, iclr, imap); } -static void psycho_irq_trans_init(struct device_node *dp) +static void __init psycho_irq_trans_init(struct device_node *dp) { const struct linux_prom64_registers *regs; @@ -613,11 +611,9 @@ static unsigned int sabre_irq_build(struct device_node *dp, /* Now build the IRQ bucket. */ imap = controller_regs + imap_off; - imap += 4; iclr_off = sabre_iclr_offset(ino); iclr = controller_regs + iclr_off; - iclr += 4; if ((ino & 0x20) == 0) inofixup = ino & 0x03; @@ -640,7 +636,7 @@ static unsigned int sabre_irq_build(struct device_node *dp, return virt_irq; } -static void sabre_irq_trans_init(struct device_node *dp) +static void __init sabre_irq_trans_init(struct device_node *dp) { const struct linux_prom64_registers *regs; struct sabre_irq_data *irq_data; @@ -679,13 +675,14 @@ static unsigned long schizo_iclr_offset(unsigned long ino) static unsigned long schizo_ino_to_iclr(unsigned long pbm_regs, unsigned int ino) { - return pbm_regs + schizo_iclr_offset(ino) + 4; + + return pbm_regs + schizo_iclr_offset(ino); } static unsigned long schizo_ino_to_imap(unsigned long pbm_regs, unsigned int ino) { - return pbm_regs + schizo_imap_offset(ino) + 4; + return pbm_regs + schizo_imap_offset(ino); } #define schizo_read(__reg) \ @@ -796,7 +793,8 @@ static unsigned int schizo_irq_build(struct device_node *dp, return virt_irq; } -static void __schizo_irq_trans_init(struct device_node *dp, int is_tomatillo) +static void __init __schizo_irq_trans_init(struct device_node *dp, + int is_tomatillo) { const struct linux_prom64_registers *regs; struct schizo_irq_data *irq_data; @@ -818,12 +816,12 @@ static void __schizo_irq_trans_init(struct device_node *dp, int is_tomatillo) irq_data->chip_version = of_getintprop_default(dp, "version#", 0); } -static void schizo_irq_trans_init(struct device_node *dp) +static void __init schizo_irq_trans_init(struct device_node *dp) { __schizo_irq_trans_init(dp, 0); } -static void tomatillo_irq_trans_init(struct device_node *dp) +static void __init tomatillo_irq_trans_init(struct device_node *dp) { __schizo_irq_trans_init(dp, 1); } @@ -837,7 +835,7 @@ static unsigned int pci_sun4v_irq_build(struct device_node *dp, return sun4v_build_irq(devhandle, devino); } -static void pci_sun4v_irq_trans_init(struct device_node *dp) +static void __init pci_sun4v_irq_trans_init(struct device_node *dp) { const struct linux_prom64_registers *regs; @@ -848,6 +846,85 @@ static void pci_sun4v_irq_trans_init(struct device_node *dp) dp->irq_trans->data = (void *) (unsigned long) ((regs->phys_addr >> 32UL) & 0x0fffffff); } + +struct fire_irq_data { + unsigned long pbm_regs; + u32 portid; +}; + +#define FIRE_IMAP_BASE 0x001000 +#define FIRE_ICLR_BASE 0x001400 + +static unsigned long fire_imap_offset(unsigned long ino) +{ + return FIRE_IMAP_BASE + (ino * 8UL); +} + +static unsigned long fire_iclr_offset(unsigned long ino) +{ + return FIRE_ICLR_BASE + (ino * 8UL); +} + +static unsigned long fire_ino_to_iclr(unsigned long pbm_regs, + unsigned int ino) +{ + return pbm_regs + fire_iclr_offset(ino); +} + +static unsigned long fire_ino_to_imap(unsigned long pbm_regs, + unsigned int ino) +{ + return pbm_regs + fire_imap_offset(ino); +} + +static unsigned int fire_irq_build(struct device_node *dp, + unsigned int ino, + void *_data) +{ + struct fire_irq_data *irq_data = _data; + unsigned long pbm_regs = irq_data->pbm_regs; + unsigned long imap, iclr; + unsigned long int_ctrlr; + + ino &= 0x3f; + + /* Now build the IRQ bucket. */ + imap = fire_ino_to_imap(pbm_regs, ino); + iclr = fire_ino_to_iclr(pbm_regs, ino); + + /* Set the interrupt controller number. */ + int_ctrlr = 1 << 6; + upa_writeq(int_ctrlr, imap); + + /* The interrupt map registers do not have an INO field + * like other chips do. They return zero in the INO + * field, and the interrupt controller number is controlled + * in bits 6 thru 9. So in order for build_irq() to get + * the INO right we pass it in as part of the fixup + * which will get added to the map register zero value + * read by build_irq(). + */ + ino |= (irq_data->portid << 6); + ino -= int_ctrlr; + return build_irq(ino, iclr, imap); +} + +static void __init fire_irq_trans_init(struct device_node *dp) +{ + const struct linux_prom64_registers *regs; + struct fire_irq_data *irq_data; + + dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller)); + dp->irq_trans->irq_build = fire_irq_build; + + irq_data = prom_early_alloc(sizeof(struct fire_irq_data)); + + regs = of_get_property(dp, "reg", NULL); + dp->irq_trans->data = irq_data; + + irq_data->pbm_regs = regs[0].phys_addr; + irq_data->portid = of_getintprop_default(dp, "portid", 0); +} #endif /* CONFIG_PCI */ #ifdef CONFIG_SBUS @@ -995,7 +1072,7 @@ static unsigned int sbus_of_build_irq(struct device_node *dp, return build_irq(sbus_level, iclr, imap); } -static void sbus_irq_trans_init(struct device_node *dp) +static void __init sbus_irq_trans_init(struct device_node *dp) { const struct linux_prom64_registers *regs; @@ -1042,7 +1119,7 @@ static unsigned int central_build_irq(struct device_node *dp, return build_irq(0, iclr, imap); } -static void central_irq_trans_init(struct device_node *dp) +static void __init central_irq_trans_init(struct device_node *dp) { dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller)); dp->irq_trans->irq_build = central_build_irq; @@ -1056,7 +1133,7 @@ struct irq_trans { }; #ifdef CONFIG_PCI -static struct irq_trans pci_irq_trans_table[] = { +static struct irq_trans __initdata pci_irq_trans_table[] = { { "SUNW,sabre", sabre_irq_trans_init }, { "pci108e,a000", sabre_irq_trans_init }, { "pci108e,a001", sabre_irq_trans_init }, @@ -1069,6 +1146,7 @@ static struct irq_trans pci_irq_trans_table[] = { { "SUNW,tomatillo", tomatillo_irq_trans_init }, { "pci108e,a801", tomatillo_irq_trans_init }, { "SUNW,sun4v-pci", pci_sun4v_irq_trans_init }, + { "pciex108e,80f0", fire_irq_trans_init }, }; #endif @@ -1081,7 +1159,7 @@ static unsigned int sun4v_vdev_irq_build(struct device_node *dp, return sun4v_build_irq(devhandle, devino); } -static void sun4v_vdev_irq_trans_init(struct device_node *dp) +static void __init sun4v_vdev_irq_trans_init(struct device_node *dp) { const struct linux_prom64_registers *regs; @@ -1093,7 +1171,7 @@ static void sun4v_vdev_irq_trans_init(struct device_node *dp) ((regs->phys_addr >> 32UL) & 0x0fffffff); } -static void irq_trans_init(struct device_node *dp) +static void __init irq_trans_init(struct device_node *dp) { #ifdef CONFIG_PCI const char *model; diff --git a/drivers/scsi/sun_esp.c b/drivers/scsi/sun_esp.c index 8c766bcd1095..bbeb2451d32f 100644 --- a/drivers/scsi/sun_esp.c +++ b/drivers/scsi/sun_esp.c @@ -5,6 +5,7 @@ #include <linux/kernel.h> #include <linux/types.h> +#include <linux/delay.h> #include <linux/module.h> #include <linux/init.h> diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c index bfd44177a215..2a63cdba3208 100644 --- a/drivers/serial/sunsu.c +++ b/drivers/serial/sunsu.c @@ -1312,7 +1312,7 @@ static void sunsu_console_write(struct console *co, const char *s, * - initialize the serial port * Return non-zero if we didn't find a serial port. */ -static int sunsu_console_setup(struct console *co, char *options) +static int __init sunsu_console_setup(struct console *co, char *options) { struct uart_port *port; int baud = 9600; @@ -1343,7 +1343,7 @@ static int sunsu_console_setup(struct console *co, char *options) return uart_set_options(port, co, baud, parity, bits, flow); } -static struct console sunsu_cons = { +static struct console sunsu_console = { .name = "ttyS", .write = sunsu_console_write, .device = uart_console_device, @@ -1373,9 +1373,9 @@ static inline struct console *SUNSU_CONSOLE(int num_uart) if (i == num_uart) return NULL; - sunsu_cons.index = i; + sunsu_console.index = i; - return &sunsu_cons; + return &sunsu_console; } #else #define SUNSU_CONSOLE(num_uart) (NULL) diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 2d89d0e9bcf4..344c37595305 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -1383,6 +1383,32 @@ config FB_LEO This is the frame buffer device driver for the SBUS-based Sun ZX (leo) frame buffer cards. +config FB_XVR500 + bool "Sun XVR-500 3DLABS Wildcat support" + depends on FB && PCI && SPARC64 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This is the framebuffer device for the Sun XVR-500 and similar + graphics cards based upon the 3DLABS Wildcat chipset. The driver + only works on sparc64 systems where the system firwmare has + mostly initialized the card already. It is treated as a + completely dumb framebuffer device. + +config FB_XVR2500 + bool "Sun XVR-2500 3DLABS Wildcat support" + depends on FB && PCI && SPARC64 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This is the framebuffer device for the Sun XVR-2500 and similar + graphics cards based upon the 3DLABS Wildcat chipset. The driver + only works on sparc64 systems where the system firwmare has + mostly initialized the card already. It is treated as a + completely dumb framebuffer device. + config FB_PCI bool "PCI framebuffers" depends on (FB = y) && PCI && SPARC diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 869351785ee8..558473d040d6 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -67,6 +67,8 @@ obj-$(CONFIG_FB_ATARI) += atafb.o c2p.o atafb_mfb.o \ atafb_iplan2p2.o atafb_iplan2p4.o atafb_iplan2p8.o obj-$(CONFIG_FB_MAC) += macfb.o obj-$(CONFIG_FB_HGA) += hgafb.o +obj-$(CONFIG_FB_XVR500) += sunxvr500.o +obj-$(CONFIG_FB_XVR2500) += sunxvr2500.o obj-$(CONFIG_FB_IGA) += igafb.o obj-$(CONFIG_FB_APOLLO) += dnfb.o obj-$(CONFIG_FB_Q40) += q40fb.o diff --git a/drivers/video/sunxvr2500.c b/drivers/video/sunxvr2500.c new file mode 100644 index 000000000000..4010492c6920 --- /dev/null +++ b/drivers/video/sunxvr2500.c @@ -0,0 +1,277 @@ +/* s3d.c: Sun 3DLABS XVR-2500 et al. driver for sparc64 systems + * + * Copyright (C) 2007 David S. Miller (davem@davemloft.net) + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/fb.h> +#include <linux/pci.h> +#include <linux/init.h> + +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/of_device.h> + +struct s3d_info { + struct fb_info *info; + struct pci_dev *pdev; + + char __iomem *fb_base; + unsigned long fb_base_phys; + + struct device_node *of_node; + + unsigned int width; + unsigned int height; + unsigned int depth; + unsigned int fb_size; + + u32 pseudo_palette[256]; +}; + +static int __devinit s3d_get_props(struct s3d_info *sp) +{ + sp->width = of_getintprop_default(sp->of_node, "width", 0); + sp->height = of_getintprop_default(sp->of_node, "height", 0); + sp->depth = of_getintprop_default(sp->of_node, "depth", 8); + + if (!sp->width || !sp->height) { + printk(KERN_ERR "s3d: Critical properties missing for %s\n", + pci_name(sp->pdev)); + return -EINVAL; + } + + return 0; +} + +static int s3d_setcolreg(unsigned regno, + unsigned red, unsigned green, unsigned blue, + unsigned transp, struct fb_info *info) +{ + u32 value; + + if (regno >= 256) + return 1; + + red >>= 8; + green >>= 8; + blue >>= 8; + + value = (blue << 24) | (green << 16) | (red << 8); + ((u32 *)info->pseudo_palette)[regno] = value; + + return 0; +} + +static struct fb_ops s3d_ops = { + .owner = THIS_MODULE, + .fb_setcolreg = s3d_setcolreg, + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, +}; + +static int __devinit s3d_set_fbinfo(struct s3d_info *sp) +{ + struct fb_info *info = sp->info; + struct fb_var_screeninfo *var = &info->var; + + info->flags = FBINFO_DEFAULT; + info->fbops = &s3d_ops; + info->screen_base = sp->fb_base; + info->screen_size = sp->fb_size; + + info->pseudo_palette = sp->pseudo_palette; + + /* Fill fix common fields */ + strlcpy(info->fix.id, "s3d", sizeof(info->fix.id)); + info->fix.smem_start = sp->fb_base_phys; + info->fix.smem_len = sp->fb_size; + info->fix.type = FB_TYPE_PACKED_PIXELS; + if (sp->depth == 32 || sp->depth == 24) + info->fix.visual = FB_VISUAL_TRUECOLOR; + else + info->fix.visual = FB_VISUAL_PSEUDOCOLOR; + + var->xres = sp->width; + var->yres = sp->height; + var->xres_virtual = var->xres; + var->yres_virtual = var->yres; + var->bits_per_pixel = sp->depth; + + var->red.offset = 8; + var->red.length = 8; + var->green.offset = 16; + var->green.length = 8; + var->blue.offset = 24; + var->blue.length = 8; + var->transp.offset = 0; + var->transp.length = 0; + + if (fb_alloc_cmap(&info->cmap, 256, 0)) { + printk(KERN_ERR "s3d: Cannot allocate color map.\n"); + return -ENOMEM; + } + + return 0; +} + +static int __devinit s3d_pci_register(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct fb_info *info; + struct s3d_info *sp; + int err; + + err = pci_enable_device(pdev); + if (err < 0) { + printk(KERN_ERR "s3d: Cannot enable PCI device %s\n", + pci_name(pdev)); + goto err_out; + } + + info = framebuffer_alloc(sizeof(struct s3d_info), &pdev->dev); + if (!info) { + printk(KERN_ERR "s3d: Cannot allocate fb_info\n"); + err = -ENOMEM; + goto err_disable; + } + + sp = info->par; + sp->info = info; + sp->pdev = pdev; + sp->of_node = pci_device_to_OF_node(pdev); + if (!sp->of_node) { + printk(KERN_ERR "s3d: Cannot find OF node of %s\n", + pci_name(pdev)); + err = -ENODEV; + goto err_release_fb; + } + + sp->fb_base_phys = pci_resource_start (pdev, 1); + + err = pci_request_region(pdev, 1, "s3d framebuffer"); + if (err < 0) { + printk("s3d: Cannot request region 1 for %s\n", + pci_name(pdev)); + goto err_release_fb; + } + + err = s3d_get_props(sp); + if (err) + goto err_release_pci; + + /* XXX 'linebytes' is often wrong, it is equal to the width + * XXX with depth of 32 on my XVR-2500 which is clearly not + * XXX right. So we don't try to use it. + */ + switch (sp->depth) { + case 8: + info->fix.line_length = sp->width; + break; + case 16: + info->fix.line_length = sp->width * 2; + break; + case 24: + info->fix.line_length = sp->width * 3; + break; + case 32: + info->fix.line_length = sp->width * 4; + break; + } + sp->fb_size = info->fix.line_length * sp->height; + + sp->fb_base = ioremap(sp->fb_base_phys, sp->fb_size); + if (!sp->fb_base) + goto err_release_pci; + + err = s3d_set_fbinfo(sp); + if (err) + goto err_unmap_fb; + + pci_set_drvdata(pdev, info); + + printk("s3d: Found device at %s\n", pci_name(pdev)); + + err = register_framebuffer(info); + if (err < 0) { + printk(KERN_ERR "s3d: Could not register framebuffer %s\n", + pci_name(pdev)); + goto err_unmap_fb; + } + + return 0; + +err_unmap_fb: + iounmap(sp->fb_base); + +err_release_pci: + pci_release_region(pdev, 1); + +err_release_fb: + framebuffer_release(info); + +err_disable: + pci_disable_device(pdev); + +err_out: + return err; +} + +static void __devexit s3d_pci_unregister(struct pci_dev *pdev) +{ + struct fb_info *info = pci_get_drvdata(pdev); + struct s3d_info *sp = info->par; + + unregister_framebuffer(info); + + iounmap(sp->fb_base); + + pci_release_region(pdev, 1); + + framebuffer_release(info); + + pci_disable_device(pdev); +} + +static struct pci_device_id s3d_pci_table[] = { + { /* XVR-2500 */ + PCI_DEVICE(PCI_VENDOR_ID_3DLABS, 0x0032), + .driver_data = 1, + }, + { /* XVR-500 */ + PCI_DEVICE(PCI_VENDOR_ID_3DLABS, 0x07a2), + .driver_data = 0, + }, + { 0, } +}; + +static struct pci_driver s3d_driver = { + .name = "s3d", + .id_table = s3d_pci_table, + .probe = s3d_pci_register, + .remove = __devexit_p(s3d_pci_unregister), +}; + +static int __init s3d_init(void) +{ + if (fb_get_options("s3d", NULL)) + return -ENODEV; + + return pci_register_driver(&s3d_driver); +} + +static void __exit s3d_exit(void) +{ + pci_unregister_driver(&s3d_driver); +} + +module_init(s3d_init); +module_exit(s3d_exit); + +MODULE_DESCRIPTION("framebuffer driver for Sun XVR-2500 graphics"); +MODULE_AUTHOR("David S. Miller <davem@davemloft.net>"); +MODULE_VERSION("1.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/video/sunxvr500.c b/drivers/video/sunxvr500.c new file mode 100644 index 000000000000..08880a62bfa3 --- /dev/null +++ b/drivers/video/sunxvr500.c @@ -0,0 +1,443 @@ +/* sunxvr500.c: Sun 3DLABS XVR-500 Expert3D driver for sparc64 systems + * + * Copyright (C) 2007 David S. Miller (davem@davemloft.net) + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/fb.h> +#include <linux/pci.h> +#include <linux/init.h> + +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/of_device.h> + +/* XXX This device has a 'dev-comm' property which aparently is + * XXX a pointer into the openfirmware's address space which is + * XXX a shared area the kernel driver can use to keep OBP + * XXX informed about the current resolution setting. The idea + * XXX is that the kernel can change resolutions, and as long + * XXX as the values in the 'dev-comm' area are accurate then + * XXX OBP can still render text properly to the console. + * XXX + * XXX I'm still working out the layout of this and whether there + * XXX are any signatures we need to look for etc. + */ +struct e3d_info { + struct fb_info *info; + struct pci_dev *pdev; + + spinlock_t lock; + + char __iomem *fb_base; + unsigned long fb_base_phys; + + unsigned long fb8_buf_diff; + unsigned long regs_base_phys; + + void __iomem *ramdac; + + struct device_node *of_node; + + unsigned int width; + unsigned int height; + unsigned int depth; + unsigned int fb_size; + + u32 fb_base_reg; + u32 fb8_0_off; + u32 fb8_1_off; + + u32 pseudo_palette[256]; +}; + +static int __devinit e3d_get_props(struct e3d_info *ep) +{ + ep->width = of_getintprop_default(ep->of_node, "width", 0); + ep->height = of_getintprop_default(ep->of_node, "height", 0); + ep->depth = of_getintprop_default(ep->of_node, "depth", 8); + + if (!ep->width || !ep->height) { + printk(KERN_ERR "e3d: Critical properties missing for %s\n", + pci_name(ep->pdev)); + return -EINVAL; + } + + return 0; +} + +/* My XVR-500 comes up, at 1280x768 and a FB base register value of + * 0x04000000, the following video layout register values: + * + * RAMDAC_VID_WH 0x03ff04ff + * RAMDAC_VID_CFG 0x1a0b0088 + * RAMDAC_VID_32FB_0 0x04000000 + * RAMDAC_VID_32FB_1 0x04800000 + * RAMDAC_VID_8FB_0 0x05000000 + * RAMDAC_VID_8FB_1 0x05200000 + * RAMDAC_VID_XXXFB 0x05400000 + * RAMDAC_VID_YYYFB 0x05c00000 + * RAMDAC_VID_ZZZFB 0x05e00000 + */ +/* Video layout registers */ +#define RAMDAC_VID_WH 0x00000070UL /* (height-1)<<16 | (width-1) */ +#define RAMDAC_VID_CFG 0x00000074UL /* 0x1a000088|(linesz_log2<<16) */ +#define RAMDAC_VID_32FB_0 0x00000078UL /* PCI base 32bpp FB buffer 0 */ +#define RAMDAC_VID_32FB_1 0x0000007cUL /* PCI base 32bpp FB buffer 1 */ +#define RAMDAC_VID_8FB_0 0x00000080UL /* PCI base 8bpp FB buffer 0 */ +#define RAMDAC_VID_8FB_1 0x00000084UL /* PCI base 8bpp FB buffer 1 */ +#define RAMDAC_VID_XXXFB 0x00000088UL /* PCI base of XXX FB */ +#define RAMDAC_VID_YYYFB 0x0000008cUL /* PCI base of YYY FB */ +#define RAMDAC_VID_ZZZFB 0x00000090UL /* PCI base of ZZZ FB */ + +/* CLUT registers */ +#define RAMDAC_INDEX 0x000000bcUL +#define RAMDAC_DATA 0x000000c0UL + +static void e3d_clut_write(struct e3d_info *ep, int index, u32 val) +{ + void __iomem *ramdac = ep->ramdac; + unsigned long flags; + + spin_lock_irqsave(&ep->lock, flags); + + writel(index, ramdac + RAMDAC_INDEX); + writel(val, ramdac + RAMDAC_DATA); + + spin_unlock_irqrestore(&ep->lock, flags); +} + +static int e3d_setcolreg(unsigned regno, + unsigned red, unsigned green, unsigned blue, + unsigned transp, struct fb_info *info) +{ + struct e3d_info *ep = info->par; + u32 red_8, green_8, blue_8; + u32 red_10, green_10, blue_10; + u32 value; + + if (regno >= 256) + return 1; + + red_8 = red >> 8; + green_8 = green >> 8; + blue_8 = blue >> 8; + + value = (blue_8 << 24) | (green_8 << 16) | (red_8 << 8); + ((u32 *)info->pseudo_palette)[regno] = value; + + + red_10 = red >> 6; + green_10 = green >> 6; + blue_10 = blue >> 6; + + value = (blue_10 << 20) | (green_10 << 10) | (red_10 << 0); + e3d_clut_write(ep, regno, value); + + return 0; +} + +/* XXX This is a bit of a hack. I can't figure out exactly how the + * XXX two 8bpp areas of the framebuffer work. I imagine there is + * XXX a WID attribute somewhere else in the framebuffer which tells + * XXX the ramdac which of the two 8bpp framebuffer regions to take + * XXX the pixel from. So, for now, render into both regions to make + * XXX sure the pixel shows up. + */ +static void e3d_imageblit(struct fb_info *info, const struct fb_image *image) +{ + struct e3d_info *ep = info->par; + unsigned long flags; + + spin_lock_irqsave(&ep->lock, flags); + cfb_imageblit(info, image); + info->screen_base += ep->fb8_buf_diff; + cfb_imageblit(info, image); + info->screen_base -= ep->fb8_buf_diff; + spin_unlock_irqrestore(&ep->lock, flags); +} + +static void e3d_fillrect(struct fb_info *info, const struct fb_fillrect *rect) +{ + struct e3d_info *ep = info->par; + unsigned long flags; + + spin_lock_irqsave(&ep->lock, flags); + cfb_fillrect(info, rect); + info->screen_base += ep->fb8_buf_diff; + cfb_fillrect(info, rect); + info->screen_base -= ep->fb8_buf_diff; + spin_unlock_irqrestore(&ep->lock, flags); +} + +static void e3d_copyarea(struct fb_info *info, const struct fb_copyarea *area) +{ + struct e3d_info *ep = info->par; + unsigned long flags; + + spin_lock_irqsave(&ep->lock, flags); + cfb_copyarea(info, area); + info->screen_base += ep->fb8_buf_diff; + cfb_copyarea(info, area); + info->screen_base -= ep->fb8_buf_diff; + spin_unlock_irqrestore(&ep->lock, flags); +} + +static struct fb_ops e3d_ops = { + .owner = THIS_MODULE, + .fb_setcolreg = e3d_setcolreg, + .fb_fillrect = e3d_fillrect, + .fb_copyarea = e3d_copyarea, + .fb_imageblit = e3d_imageblit, +}; + +static int __devinit e3d_set_fbinfo(struct e3d_info *ep) +{ + struct fb_info *info = ep->info; + struct fb_var_screeninfo *var = &info->var; + + info->flags = FBINFO_DEFAULT; + info->fbops = &e3d_ops; + info->screen_base = ep->fb_base; + info->screen_size = ep->fb_size; + + info->pseudo_palette = ep->pseudo_palette; + + /* Fill fix common fields */ + strlcpy(info->fix.id, "e3d", sizeof(info->fix.id)); + info->fix.smem_start = ep->fb_base_phys; + info->fix.smem_len = ep->fb_size; + info->fix.type = FB_TYPE_PACKED_PIXELS; + if (ep->depth == 32 || ep->depth == 24) + info->fix.visual = FB_VISUAL_TRUECOLOR; + else + info->fix.visual = FB_VISUAL_PSEUDOCOLOR; + + var->xres = ep->width; + var->yres = ep->height; + var->xres_virtual = var->xres; + var->yres_virtual = var->yres; + var->bits_per_pixel = ep->depth; + + var->red.offset = 8; + var->red.length = 8; + var->green.offset = 16; + var->green.length = 8; + var->blue.offset = 24; + var->blue.length = 8; + var->transp.offset = 0; + var->transp.length = 0; + + if (fb_alloc_cmap(&info->cmap, 256, 0)) { + printk(KERN_ERR "e3d: Cannot allocate color map.\n"); + return -ENOMEM; + } + + return 0; +} + +static int __devinit e3d_pci_register(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct fb_info *info; + struct e3d_info *ep; + unsigned int line_length; + int err; + + err = pci_enable_device(pdev); + if (err < 0) { + printk(KERN_ERR "e3d: Cannot enable PCI device %s\n", + pci_name(pdev)); + goto err_out; + } + + info = framebuffer_alloc(sizeof(struct e3d_info), &pdev->dev); + if (!info) { + printk(KERN_ERR "e3d: Cannot allocate fb_info\n"); + err = -ENOMEM; + goto err_disable; + } + + ep = info->par; + ep->info = info; + ep->pdev = pdev; + spin_lock_init(&ep->lock); + ep->of_node = pci_device_to_OF_node(pdev); + if (!ep->of_node) { + printk(KERN_ERR "e3d: Cannot find OF node of %s\n", + pci_name(pdev)); + err = -ENODEV; + goto err_release_fb; + } + + /* Read the PCI base register of the frame buffer, which we + * need in order to interpret the RAMDAC_VID_*FB* values in + * the ramdac correctly. + */ + pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0, + &ep->fb_base_reg); + ep->fb_base_reg &= PCI_BASE_ADDRESS_MEM_MASK; + + ep->regs_base_phys = pci_resource_start (pdev, 1); + err = pci_request_region(pdev, 1, "e3d regs"); + if (err < 0) { + printk("e3d: Cannot request region 1 for %s\n", + pci_name(pdev)); + goto err_release_fb; + } + ep->ramdac = ioremap(ep->regs_base_phys + 0x8000, 0x1000); + if (!ep->ramdac) + goto err_release_pci1; + + ep->fb8_0_off = readl(ep->ramdac + RAMDAC_VID_8FB_0); + ep->fb8_0_off -= ep->fb_base_reg; + + ep->fb8_1_off = readl(ep->ramdac + RAMDAC_VID_8FB_1); + ep->fb8_1_off -= ep->fb_base_reg; + + ep->fb8_buf_diff = ep->fb8_1_off - ep->fb8_0_off; + + ep->fb_base_phys = pci_resource_start (pdev, 0); + ep->fb_base_phys += ep->fb8_0_off; + + err = pci_request_region(pdev, 0, "e3d framebuffer"); + if (err < 0) { + printk("e3d: Cannot request region 0 for %s\n", + pci_name(pdev)); + goto err_unmap_ramdac; + } + + err = e3d_get_props(ep); + if (err) + goto err_release_pci0; + + line_length = (readl(ep->ramdac + RAMDAC_VID_CFG) >> 16) & 0xff; + line_length = 1 << line_length; + + switch (ep->depth) { + case 8: + info->fix.line_length = line_length; + break; + case 16: + info->fix.line_length = line_length * 2; + break; + case 24: + info->fix.line_length = line_length * 3; + break; + case 32: + info->fix.line_length = line_length * 4; + break; + } + ep->fb_size = info->fix.line_length * ep->height; + + ep->fb_base = ioremap(ep->fb_base_phys, ep->fb_size); + if (!ep->fb_base) + goto err_release_pci0; + + err = e3d_set_fbinfo(ep); + if (err) + goto err_unmap_fb; + + pci_set_drvdata(pdev, info); + + printk("e3d: Found device at %s\n", pci_name(pdev)); + + err = register_framebuffer(info); + if (err < 0) { + printk(KERN_ERR "e3d: Could not register framebuffer %s\n", + pci_name(pdev)); + goto err_unmap_fb; + } + + return 0; + +err_unmap_fb: + iounmap(ep->fb_base); + +err_release_pci0: + pci_release_region(pdev, 0); + +err_unmap_ramdac: + iounmap(ep->ramdac); + +err_release_pci1: + pci_release_region(pdev, 1); + +err_release_fb: + framebuffer_release(info); + +err_disable: + pci_disable_device(pdev); + +err_out: + return err; +} + +static void __devexit e3d_pci_unregister(struct pci_dev *pdev) +{ + struct fb_info *info = pci_get_drvdata(pdev); + struct e3d_info *ep = info->par; + + unregister_framebuffer(info); + + iounmap(ep->ramdac); + iounmap(ep->fb_base); + + pci_release_region(pdev, 0); + pci_release_region(pdev, 1); + + framebuffer_release(info); + + pci_disable_device(pdev); +} + +static struct pci_device_id e3d_pci_table[] = { + { PCI_DEVICE(PCI_VENDOR_ID_3DLABS, 0x7a0), }, + { PCI_DEVICE(PCI_VENDOR_ID_3DLABS, 0x7a2), }, + { .vendor = PCI_VENDOR_ID_3DLABS, + .device = PCI_ANY_ID, + .subvendor = PCI_VENDOR_ID_3DLABS, + .subdevice = 0x0108, + }, + { .vendor = PCI_VENDOR_ID_3DLABS, + .device = PCI_ANY_ID, + .subvendor = PCI_VENDOR_ID_3DLABS, + .subdevice = 0x0140, + }, + { .vendor = PCI_VENDOR_ID_3DLABS, + .device = PCI_ANY_ID, + .subvendor = PCI_VENDOR_ID_3DLABS, + .subdevice = 0x1024, + }, + { 0, } +}; + +static struct pci_driver e3d_driver = { + .name = "e3d", + .id_table = e3d_pci_table, + .probe = e3d_pci_register, + .remove = __devexit_p(e3d_pci_unregister), +}; + +static int __init e3d_init(void) +{ + if (fb_get_options("e3d", NULL)) + return -ENODEV; + + return pci_register_driver(&e3d_driver); +} + +static void __exit e3d_exit(void) +{ + pci_unregister_driver(&e3d_driver); +} + +module_init(e3d_init); +module_exit(e3d_exit); + +MODULE_DESCRIPTION("framebuffer driver for Sun XVR-500 graphics"); +MODULE_AUTHOR("David S. Miller <davem@davemloft.net>"); +MODULE_VERSION("1.0"); +MODULE_LICENSE("GPL"); diff --git a/include/asm-sparc64/iommu.h b/include/asm-sparc64/iommu.h index e199594a1e9b..0b1813f41045 100644 --- a/include/asm-sparc64/iommu.h +++ b/include/asm-sparc64/iommu.h @@ -32,6 +32,7 @@ struct iommu { unsigned long iommu_control; unsigned long iommu_tsbbase; unsigned long iommu_flush; + unsigned long iommu_flushinv; unsigned long iommu_ctxflush; unsigned long write_complete_reg; unsigned long dummy_page; diff --git a/mm/sparse.c b/mm/sparse.c index ac26eb0d73cd..893e5621c247 100644 --- a/mm/sparse.c +++ b/mm/sparse.c @@ -272,7 +272,7 @@ static void __kfree_section_memmap(struct page *memmap, unsigned long nr_pages) * Allocate the accumulated non-linear sections, allocate a mem_map * for each and record the physical to section mapping. */ -void sparse_init(void) +void __init sparse_init(void) { unsigned long pnum; struct page *map; |