diff options
| author | Mahesh Bandewar <maheshb@google.com> | 2014-11-23 23:07:46 -0800 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2014-11-24 15:29:18 -0500 |
| commit | 2ad7bf3638411cb547f2823df08166c13ab04269 (patch) | |
| tree | 2d31c5a7f0278318d7f6aae805ca4c1296c50afb /include | |
| parent | 2bbea0a885079a095c252a927a174a0bfec9e3e9 (diff) | |
ipvlan: Initial check-in of the IPVLAN driver.
This driver is very similar to the macvlan driver except that it
uses L3 on the frame to determine the logical interface while
functioning as packet dispatcher. It inherits L2 of the master
device hence the packets on wire will have the same L2 for all
the packets originating from all virtual devices off of the same
master device.
This driver was developed keeping the namespace use-case in
mind. Hence most of the examples given here take that as the
base setup where main-device belongs to the default-ns and
virtual devices are assigned to the additional namespaces.
The device operates in two different modes and the difference
in these two modes in primarily in the TX side.
(a) L2 mode : In this mode, the device behaves as a L2 device.
TX processing upto L2 happens on the stack of the virtual device
associated with (namespace). Packets are switched after that
into the main device (default-ns) and queued for xmit.
RX processing is simple and all multicast, broadcast (if
applicable), and unicast belonging to the address(es) are
delivered to the virtual devices.
(b) L3 mode : In this mode, the device behaves like a L3 device.
TX processing upto L3 happens on the stack of the virtual device
associated with (namespace). Packets are switched to the
main-device (default-ns) for the L2 processing. Hence the routing
table of the default-ns will be used in this mode.
RX processins is somewhat similar to the L2 mode except that in
this mode only Unicast packets are delivered to the virtual device
while main-dev will handle all other packets.
The devices can be added using the "ip" command from the iproute2
package -
ip link add link <master> <virtual> type ipvlan mode [ l2 | l3 ]
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Laurent Chavey <chavey@google.com>
Cc: Tim Hockin <thockin@google.com>
Cc: Brandon Philips <brandon.philips@coreos.com>
Cc: Pavel Emelianov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/netdevice.h | 4 | ||||
| -rw-r--r-- | include/uapi/linux/if_link.h | 15 |
2 files changed, 19 insertions, 0 deletions
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 5cd508787572..2cb772495f7a 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1230,6 +1230,8 @@ enum netdev_priv_flags { IFF_LIVE_ADDR_CHANGE = 1<<20, IFF_MACVLAN = 1<<21, IFF_XMIT_DST_RELEASE_PERM = 1<<22, + IFF_IPVLAN_MASTER = 1<<23, + IFF_IPVLAN_SLAVE = 1<<24, }; #define IFF_802_1Q_VLAN IFF_802_1Q_VLAN @@ -1255,6 +1257,8 @@ enum netdev_priv_flags { #define IFF_LIVE_ADDR_CHANGE IFF_LIVE_ADDR_CHANGE #define IFF_MACVLAN IFF_MACVLAN #define IFF_XMIT_DST_RELEASE_PERM IFF_XMIT_DST_RELEASE_PERM +#define IFF_IPVLAN_MASTER IFF_IPVLAN_MASTER +#define IFF_IPVLAN_SLAVE IFF_IPVLAN_SLAVE /** * struct net_device - The DEVICE structure. diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h index 7072d8325016..36bddc233633 100644 --- a/include/uapi/linux/if_link.h +++ b/include/uapi/linux/if_link.h @@ -330,6 +330,21 @@ enum macvlan_macaddr_mode { #define MACVLAN_FLAG_NOPROMISC 1 +/* IPVLAN section */ +enum { + IFLA_IPVLAN_UNSPEC, + IFLA_IPVLAN_MODE, + __IFLA_IPVLAN_MAX +}; + +#define IFLA_IPVLAN_MAX (__IFLA_IPVLAN_MAX - 1) + +enum ipvlan_mode { + IPVLAN_MODE_L2 = 0, + IPVLAN_MODE_L3, + IPVLAN_MODE_MAX +}; + /* VXLAN section */ enum { IFLA_VXLAN_UNSPEC, |