staging: delete rtl8187se wireless driver

There is a "real" driver for this hardware now in drivers/net/ so remove
the staging version as it's not needed anymore.

Reported-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: John W. Linville" <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

31 files changed, 0 insertions, 19847 deletions

diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index ea5efb426f75..22365f140bec 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -40,8 +40,6 @@ source "drivers/staging/olpc_dcon/Kconfig"
 
 source "drivers/staging/panel/Kconfig"
 
-source "drivers/staging/rtl8187se/Kconfig"
-
 source "drivers/staging/rtl8192u/Kconfig"
 
 source "drivers/staging/rtl8192e/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 86e020c2ad0d..fbe84ed2d048 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -12,7 +12,6 @@ obj-$(CONFIG_PRISM2_USB)	+= wlan-ng/
 obj-$(CONFIG_COMEDI)		+= comedi/
 obj-$(CONFIG_FB_OLPC_DCON)	+= olpc_dcon/
 obj-$(CONFIG_PANEL)		+= panel/
-obj-$(CONFIG_R8187SE)		+= rtl8187se/
 obj-$(CONFIG_RTL8192U)		+= rtl8192u/
 obj-$(CONFIG_RTL8192E)		+= rtl8192e/
 obj-$(CONFIG_R8712U)		+= rtl8712/
diff --git a/drivers/staging/rtl8187se/Kconfig b/drivers/staging/rtl8187se/Kconfig
deleted file mode 100644
index ff8d41ebca36..000000000000
--- a/drivers/staging/rtl8187se/Kconfig
+++ /dev/null
@@ -1,10 +0,0 @@
-config R8187SE
-	tristate "RealTek RTL8187SE Wireless LAN NIC driver"
-	depends on PCI && WLAN
-	depends on m
-	select WIRELESS_EXT
-	select WEXT_PRIV
-	select EEPROM_93CX6
-	select CRYPTO
-	---help---
-	  If built as a module, it will be called r8187se.ko.
diff --git a/drivers/staging/rtl8187se/Makefile b/drivers/staging/rtl8187se/Makefile
deleted file mode 100644
index 91d1aa2830c9..000000000000
--- a/drivers/staging/rtl8187se/Makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-
-#ccflags-y += -DCONFIG_IEEE80211_NOWEP=y
-#ccflags-y += -std=gnu89
-#ccflags-y += -O2
-#CC            = gcc
-
-ccflags-y := -DSW_ANTE
-ccflags-y += -DTX_TRACK
-ccflags-y += -DHIGH_POWER
-ccflags-y += -DSW_DIG
-ccflags-y += -DRATE_ADAPT
-
-#enable it for legacy power save, disable it for leisure power save
-ccflags-y += -DENABLE_LPS
-
-
-#ccflags-y := -mhard-float -DCONFIG_FORCE_HARD_FLOAT=y
-
-r8187se-y :=			\
-		r8180_core.o		\
-		r8180_wx.o		\
-		r8180_rtl8225z2.o	\
-		r8185b_init.o		\
-		r8180_dm.o		\
-		ieee80211/dot11d.o			\
-		ieee80211/ieee80211_softmac.o		\
-		ieee80211/ieee80211_rx.o		\
-		ieee80211/ieee80211_tx.o		\
-		ieee80211/ieee80211_wx.o		\
-		ieee80211/ieee80211_module.o		\
-		ieee80211/ieee80211_softmac_wx.o	\
-		ieee80211/ieee80211_crypt.o		\
-		ieee80211/ieee80211_crypt_tkip.o	\
-		ieee80211/ieee80211_crypt_ccmp.o	\
-		ieee80211/ieee80211_crypt_wep.o
-
-obj-$(CONFIG_R8187SE)	+= r8187se.o
-
diff --git a/drivers/staging/rtl8187se/Module.symvers b/drivers/staging/rtl8187se/Module.symvers
deleted file mode 100644
index e69de29bb2d1..000000000000
--- a/drivers/staging/rtl8187se/Module.symvers
+++ /dev/null
diff --git a/drivers/staging/rtl8187se/TODO b/drivers/staging/rtl8187se/TODO
deleted file mode 100644
index 704949a9da0d..000000000000
--- a/drivers/staging/rtl8187se/TODO
+++ /dev/null
@@ -1,13 +0,0 @@
-TODO:
-- prepare private ieee80211 stack for merge with rtl8192su's version:
-  - add hwsec_active flag to struct ieee80211_device
-  - add bHwSec flag to cb_desc structure
-- switch to use shared "librtl" instead of private ieee80211 stack
-- switch to use LIB80211
-- switch to use MAC80211
-- use kernel coding style
-- checkpatch.pl fixes
-- sparse fixes
-- integrate with drivers/net/wireless/rtl818x
-
-Please send any patches to Greg Kroah-Hartman <greg@kroah.com>.
diff --git a/drivers/staging/rtl8187se/ieee80211/dot11d.c b/drivers/staging/rtl8187se/ieee80211/dot11d.c
deleted file mode 100644
index 4483c2c0307c..000000000000
--- a/drivers/staging/rtl8187se/ieee80211/dot11d.c
+++ /dev/null
@@ -1,189 +0,0 @@
-#include "dot11d.h"
-
-void Dot11d_Init(struct ieee80211_device *ieee)
-{
-	PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(ieee);
-
-	pDot11dInfo->bEnabled = 0;
-
-	pDot11dInfo->State = DOT11D_STATE_NONE;
-	pDot11dInfo->CountryIeLen = 0;
-	memset(pDot11dInfo->channel_map, 0, MAX_CHANNEL_NUMBER+1);
-	memset(pDot11dInfo->MaxTxPwrDbmList, 0xFF, MAX_CHANNEL_NUMBER+1);
-	RESET_CIE_WATCHDOG(ieee);
-
-	netdev_info(ieee->dev, "Dot11d_Init()\n");
-}
-
-/* Reset to the state as we are just entering a regulatory domain. */
-void Dot11d_Reset(struct ieee80211_device *ieee)
-{
-	u32 i;
-	PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(ieee);
-
-	/* Clear old channel map */
-	memset(pDot11dInfo->channel_map, 0, MAX_CHANNEL_NUMBER+1);
-	memset(pDot11dInfo->MaxTxPwrDbmList, 0xFF, MAX_CHANNEL_NUMBER+1);
-	/* Set new channel map */
-	for (i = 1; i <= 11; i++)
-		(pDot11dInfo->channel_map)[i] = 1;
-
-	for (i = 12; i <= 14; i++)
-		(pDot11dInfo->channel_map)[i] = 2;
-
-	pDot11dInfo->State = DOT11D_STATE_NONE;
-	pDot11dInfo->CountryIeLen = 0;
-	RESET_CIE_WATCHDOG(ieee);
-}
-
-/*
- * Description:
- *	Update country IE from Beacon or Probe Response and configure PHY for
- *	operation in the regulatory domain.
- *
- * TODO:
- *	Configure Tx power.
- *
- * Assumption:
- *	1. IS_DOT11D_ENABLE() is TRUE.
- *	2. Input IE is an valid one.
- */
-void Dot11d_UpdateCountryIe(struct ieee80211_device *dev, u8 *pTaddr,
-			    u16 CoutryIeLen, u8 *pCoutryIe)
-{
-	PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev);
-	u8 i, j, NumTriples, MaxChnlNum;
-	u8 index, MaxTxPowerInDbm;
-	PCHNL_TXPOWER_TRIPLE pTriple;
-
-	if ((CoutryIeLen - 3)%3 != 0) {
-		netdev_info(dev->dev, "Dot11d_UpdateCountryIe(): Invalid country IE, skip it........1\n");
-		Dot11d_Reset(dev);
-		return;
-	}
-
-	memset(pDot11dInfo->channel_map, 0, MAX_CHANNEL_NUMBER+1);
-	memset(pDot11dInfo->MaxTxPwrDbmList, 0xFF, MAX_CHANNEL_NUMBER+1);
-	MaxChnlNum = 0;
-	NumTriples = (CoutryIeLen - 3) / 3; /* skip 3-byte country string. */
-	pTriple = (PCHNL_TXPOWER_TRIPLE)(pCoutryIe + 3);
-	for (i = 0; i < NumTriples; i++) {
-		if (MaxChnlNum >= pTriple->FirstChnl) {
-			/*
-			 * It is not in a monotonically increasing order,
-			 * so stop processing.
-			 */
-			netdev_info(dev->dev,
-				    "Dot11d_UpdateCountryIe(): Invalid country IE, skip it........1\n");
-			Dot11d_Reset(dev);
-			return;
-		}
-		if (MAX_CHANNEL_NUMBER <
-		    (pTriple->FirstChnl + pTriple->NumChnls)) {
-			/*
-			 * It is not a valid set of channel id,
-			 * so stop processing
-			 */
-			netdev_info(dev->dev,
-				    "Dot11d_UpdateCountryIe(): Invalid country IE, skip it........2\n");
-			Dot11d_Reset(dev);
-			return;
-		}
-
-		for (j = 0; j < pTriple->NumChnls; j++) {
-			index = pTriple->FirstChnl + j;
-			pDot11dInfo->channel_map[index] = 1;
-			MaxTxPowerInDbm = pTriple->MaxTxPowerInDbm;
-			pDot11dInfo->MaxTxPwrDbmList[index] = MaxTxPowerInDbm;
-			MaxChnlNum = pTriple->FirstChnl + j;
-		}
-
-		pTriple = (PCHNL_TXPOWER_TRIPLE)((u8 *)pTriple + 3);
-	}
-#if 1
-	netdev_info(dev->dev, "Channel List:");
-	for (i = 1; i <= MAX_CHANNEL_NUMBER; i++)
-		if (pDot11dInfo->channel_map[i] > 0)
-			netdev_info(dev->dev, " %d", i);
-	netdev_info(dev->dev, "\n");
-#endif
-
-	UPDATE_CIE_SRC(dev, pTaddr);
-
-	pDot11dInfo->CountryIeLen = CoutryIeLen;
-	memcpy(pDot11dInfo->CountryIeBuf, pCoutryIe, CoutryIeLen);
-	pDot11dInfo->State = DOT11D_STATE_LEARNED;
-}
-
-u8 DOT11D_GetMaxTxPwrInDbm(struct ieee80211_device *dev, u8 Channel)
-{
-	PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev);
-	u8 MaxTxPwrInDbm = 255;
-
-	if (MAX_CHANNEL_NUMBER < Channel) {
-		netdev_info(dev->dev, "DOT11D_GetMaxTxPwrInDbm(): Invalid Channel\n");
-		return MaxTxPwrInDbm;
-	}
-	if (pDot11dInfo->channel_map[Channel])
-		MaxTxPwrInDbm = pDot11dInfo->MaxTxPwrDbmList[Channel];
-
-	return MaxTxPwrInDbm;
-}
-
-
-void DOT11D_ScanComplete(struct ieee80211_device *dev)
-{
-	PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev);
-
-	switch (pDot11dInfo->State) {
-	case DOT11D_STATE_LEARNED:
-		pDot11dInfo->State = DOT11D_STATE_DONE;
-		break;
-
-	case DOT11D_STATE_DONE:
-		if (GET_CIE_WATCHDOG(dev) == 0) {
-			/* Reset country IE if previous one is gone. */
-			Dot11d_Reset(dev);
-		}
-		break;
-	case DOT11D_STATE_NONE:
-		break;
-	}
-}
-
-int IsLegalChannel(struct ieee80211_device *dev, u8 channel)
-{
-	PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev);
-
-	if (MAX_CHANNEL_NUMBER < channel) {
-		netdev_info(dev->dev, "IsLegalChannel(): Invalid Channel\n");
-		return 0;
-	}
-	if (pDot11dInfo->channel_map[channel] > 0)
-		return 1;
-	return 0;
-}
-
-int ToLegalChannel(struct ieee80211_device *dev, u8 channel)
-{
-	PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev);
-	u8 default_chn = 0;
-	u32 i = 0;
-
-	for (i = 1; i <= MAX_CHANNEL_NUMBER; i++) {
-		if (pDot11dInfo->channel_map[i] > 0) {
-			default_chn = i;
-			break;
-		}
-	}
-
-	if (MAX_CHANNEL_NUMBER < channel) {
-		netdev_info(dev->dev, "IsLegalChannel(): Invalid Channel\n");
-		return default_chn;
-	}
-
-	if (pDot11dInfo->channel_map[channel] > 0)
-		return channel;
-
-	return default_chn;
-}
diff --git a/drivers/staging/rtl8187se/ieee80211/dot11d.h b/drivers/staging/rtl8187se/ieee80211/dot11d.h
deleted file mode 100644
index f996691307bf..000000000000
--- a/drivers/staging/rtl8187se/ieee80211/dot11d.h
+++ /dev/null
@@ -1,71 +0,0 @@
-#ifndef __INC_DOT11D_H
-#define __INC_DOT11D_H
-
-#include "ieee80211.h"
-
-/* #define ENABLE_DOT11D */
-
-/* #define DOT11D_MAX_CHNL_NUM 83 */
-
-typedef struct _CHNL_TXPOWER_TRIPLE {
-	u8 FirstChnl;
-	u8  NumChnls;
-	u8  MaxTxPowerInDbm;
-} CHNL_TXPOWER_TRIPLE, *PCHNL_TXPOWER_TRIPLE;
-
-typedef enum _DOT11D_STATE {
-	DOT11D_STATE_NONE = 0,
-	DOT11D_STATE_LEARNED,
-	DOT11D_STATE_DONE,
-} DOT11D_STATE;
-
-typedef struct _RT_DOT11D_INFO {
-	/* DECLARE_RT_OBJECT(RT_DOT12D_INFO); */
-
-	bool bEnabled; /* dot11MultiDomainCapabilityEnabled */
-
-	u16 CountryIeLen; /* > 0 if CountryIeBuf[] contains valid country information element. */
-	u8  CountryIeBuf[MAX_IE_LEN];
-	u8  CountryIeSrcAddr[6]; /* Source AP of the country IE. */
-	u8  CountryIeWatchdog;
-
-	u8  channel_map[MAX_CHANNEL_NUMBER+1];  /* !!!Value 0: Invalid, 1: Valid (active scan), 2: Valid (passive scan) */
-	/* u8  ChnlListLen; // #Bytes valid in ChnlList[]. */
-	/* u8  ChnlList[DOT11D_MAX_CHNL_NUM]; */
-	u8  MaxTxPwrDbmList[MAX_CHANNEL_NUMBER+1];
-
-	DOT11D_STATE State;
-} RT_DOT11D_INFO, *PRT_DOT11D_INFO;
-
-#define eqMacAddr(a, b) (((a)[0] == (b)[0] && (a)[1] == (b)[1] && (a)[2] == (b)[2] && (a)[3] == (b)[3] && (a)[4] == (b)[4] && (a)[5] == (b)[5]) ? 1:0)
-#define cpMacAddr(des, src) ((des)[0] = (src)[0], (des)[1] = (src)[1], (des)[2] = (src)[2], (des)[3] = (src)[3], (des)[4] = (src)[4], (des)[5] = (src)[5])
-#define GET_DOT11D_INFO(__pIeeeDev) ((PRT_DOT11D_INFO)((__pIeeeDev)->pDot11dInfo))
-
-#define IS_DOT11D_ENABLE(__pIeeeDev) GET_DOT11D_INFO(__pIeeeDev)->bEnabled
-#define IS_COUNTRY_IE_VALID(__pIeeeDev) (GET_DOT11D_INFO(__pIeeeDev)->CountryIeLen > 0)
-
-#define IS_EQUAL_CIE_SRC(__pIeeeDev, __pTa) eqMacAddr(GET_DOT11D_INFO(__pIeeeDev)->CountryIeSrcAddr, __pTa)
-#define UPDATE_CIE_SRC(__pIeeeDev, __pTa) cpMacAddr(GET_DOT11D_INFO(__pIeeeDev)->CountryIeSrcAddr, __pTa)
-
-#define IS_COUNTRY_IE_CHANGED(__pIeeeDev, __Ie) \
-	(((__Ie).Length == 0 || (__Ie).Length != GET_DOT11D_INFO(__pIeeeDev)->CountryIeLen) ? \
-	FALSE : \
-	(!memcmp(GET_DOT11D_INFO(__pIeeeDev)->CountryIeBuf, (__Ie).Octet, (__Ie).Length)))
-
-#define CIE_WATCHDOG_TH 1
-#define GET_CIE_WATCHDOG(__pIeeeDev) GET_DOT11D_INFO(__pIeeeDev)->CountryIeWatchdog
-#define RESET_CIE_WATCHDOG(__pIeeeDev) GET_CIE_WATCHDOG(__pIeeeDev) = 0
-#define UPDATE_CIE_WATCHDOG(__pIeeeDev) ++GET_CIE_WATCHDOG(__pIeeeDev)
-
-#define IS_DOT11D_STATE_DONE(__pIeeeDev) (GET_DOT11D_INFO(__pIeeeDev)->State == DOT11D_STATE_DONE)
-
-void Dot11d_Init(struct ieee80211_device *dev);
-void Dot11d_Reset(struct ieee80211_device *dev);
-void Dot11d_UpdateCountryIe(struct ieee80211_device *dev, u8 *pTaddr,
-			    u16 CoutryIeLen, u8 *pCoutryIe);
-u8 DOT11D_GetMaxTxPwrInDbm(struct ieee80211_device *dev, u8 Channel);
-void DOT11D_ScanComplete(struct ieee80211_device *dev);
-int IsLegalChannel(struct ieee80211_device *dev, u8 channel);
-int ToLegalChannel(struct ieee80211_device *dev, u8 channel);
-
-#endif /*  #ifndef __INC_DOT11D_H */
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211.h b/drivers/staging/rtl8187se/ieee80211/ieee80211.h
deleted file mode 100644
index d1763b7b8f27..000000000000
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211.h
+++ /dev/null
@@ -1,1496 +0,0 @@
-/*
- * Merged with mainline ieee80211.h in Aug 2004.  Original ieee802_11
- * remains copyright by the original authors
- *
- * Portions of the merged code are based on Host AP (software wireless
- * LAN access point) driver for Intersil Prism2/2.5/3.
- *
- * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
- * <jkmaline@cc.hut.fi>
- * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
- *
- * Adaption to a generic IEEE 802.11 stack by James Ketrenos
- * <jketreno@linux.intel.com>
- * Copyright (c) 2004, Intel Corporation
- *
- * Modified for Realtek's wi-fi cards by Andrea Merello
- * <andrea.merello@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation. See README and COPYING for
- * more details.
- */
-#ifndef IEEE80211_H
-#define IEEE80211_H
-#include <linux/if_ether.h> /* ETH_ALEN */
-#include <linux/kernel.h>   /* ARRAY_SIZE */
-#include <linux/jiffies.h>
-#include <linux/timer.h>
-#include <linux/sched.h>
-#include <linux/semaphore.h>
-#include <linux/wireless.h>
-#include <linux/ieee80211.h>
-#include <linux/interrupt.h>
-
-#define KEY_TYPE_NA		0x0
-#define KEY_TYPE_WEP40 		0x1
-#define KEY_TYPE_TKIP		0x2
-#define KEY_TYPE_CCMP		0x4
-#define KEY_TYPE_WEP104		0x5
-
-#define aSifsTime					10
-
-#define MGMT_QUEUE_NUM 5
-
-
-#define IEEE_CMD_SET_WPA_PARAM			1
-#define	IEEE_CMD_SET_WPA_IE			2
-#define IEEE_CMD_SET_ENCRYPTION			3
-#define IEEE_CMD_MLME				4
-
-#define IEEE_PARAM_WPA_ENABLED			1
-#define IEEE_PARAM_TKIP_COUNTERMEASURES		2
-#define IEEE_PARAM_DROP_UNENCRYPTED		3
-#define IEEE_PARAM_PRIVACY_INVOKED		4
-#define IEEE_PARAM_AUTH_ALGS			5
-#define IEEE_PARAM_IEEE_802_1X			6
-//It should consistent with the driver_XXX.c
-//   David, 2006.9.26
-#define IEEE_PARAM_WPAX_SELECT			7
-//Added for notify the encryption type selection
-//   David, 2006.9.26
-#define IEEE_PROTO_WPA				1
-#define IEEE_PROTO_RSN				2
-//Added for notify the encryption type selection
-//   David, 2006.9.26
-#define IEEE_WPAX_USEGROUP			0
-#define IEEE_WPAX_WEP40				1
-#define IEEE_WPAX_TKIP				2
-#define IEEE_WPAX_WRAP   			3
-#define IEEE_WPAX_CCMP				4
-#define IEEE_WPAX_WEP104			5
-
-#define IEEE_KEY_MGMT_IEEE8021X			1
-#define IEEE_KEY_MGMT_PSK			2
-
-
-
-#define IEEE_MLME_STA_DEAUTH			1
-#define IEEE_MLME_STA_DISASSOC			2
-
-
-#define IEEE_CRYPT_ERR_UNKNOWN_ALG		2
-#define IEEE_CRYPT_ERR_UNKNOWN_ADDR		3
-#define IEEE_CRYPT_ERR_CRYPT_INIT_FAILED		4
-#define IEEE_CRYPT_ERR_KEY_SET_FAILED		5
-#define IEEE_CRYPT_ERR_TX_KEY_SET_FAILED		6
-#define IEEE_CRYPT_ERR_CARD_CONF_FAILED		7
-
-
-#define	IEEE_CRYPT_ALG_NAME_LEN			16
-
-extern int ieee80211_crypto_tkip_init(void);
-extern void ieee80211_crypto_tkip_exit(void);
-
-//by amy for ps
-typedef struct ieee_param {
-	u32 cmd;
-	u8 sta_addr[ETH_ALEN];
-        union {
-		struct {
-			u8 name;
-			u32 value;
-		} wpa_param;
-		struct {
-			u32 len;
-			u8 reserved[32];
-			u8 data[0];
-		} wpa_ie;
-	        struct{
-			int command;
-    			int reason_code;
-		} mlme;
-		struct {
-			u8 alg[IEEE_CRYPT_ALG_NAME_LEN];
-			u8 set_tx;
-			u32 err;
-			u8 idx;
-			u8 seq[8]; /* sequence counter (set: RX, get: TX) */
-			u16 key_len;
-			u8 key[0];
-		} crypt;
-
-	} u;
-}ieee_param;
-
-
-#define MSECS(t) msecs_to_jiffies(t)
-#define msleep_interruptible_rtl  msleep_interruptible
-
-#define IEEE80211_DATA_LEN		2304
-/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
-   6.2.1.1.2.
-
-   The figure in section 7.1.2 suggests a body size of up to 2312
-   bytes is allowed, which is a bit confusing, I suspect this
-   represents the 2304 bytes of real data, plus a possible 8 bytes of
-   WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
-
-#define IEEE80211_3ADDR_LEN 24
-#define IEEE80211_4ADDR_LEN 30
-#define IEEE80211_FCS_LEN    4
-#define IEEE80211_HLEN			IEEE80211_4ADDR_LEN
-#define IEEE80211_FRAME_LEN		(IEEE80211_DATA_LEN + IEEE80211_HLEN)
-#define IEEE80211_MGMT_HDR_LEN 24
-#define IEEE80211_DATA_HDR3_LEN 24
-#define IEEE80211_DATA_HDR4_LEN 30
-
-#define MIN_FRAG_THRESHOLD     256U
-#define	MAX_FRAG_THRESHOLD     2346U
-
-/* Frame control field constants */
-#define IEEE80211_FCTL_DSTODS		0x0300 //added by david
-#define IEEE80211_FCTL_WEP		0x4000
-
-/* debug macros */
-
-#ifdef CONFIG_IEEE80211_DEBUG
-extern u32 ieee80211_debug_level;
-#define IEEE80211_DEBUG(level, fmt, args...) \
-do { if (ieee80211_debug_level & (level)) \
-  printk(KERN_DEBUG "ieee80211: %c %s " fmt, \
-         in_interrupt() ? 'I' : 'U', __func__ , ## args); } while (0)
-#else
-#define IEEE80211_DEBUG(level, fmt, args...) do {} while (0)
-#endif	/* CONFIG_IEEE80211_DEBUG */
-
-/*
- * To use the debug system;
- *
- * If you are defining a new debug classification, simply add it to the #define
- * list here in the form of:
- *
- * #define IEEE80211_DL_xxxx VALUE
- *
- * shifting value to the left one bit from the previous entry.  xxxx should be
- * the name of the classification (for example, WEP)
- *
- * You then need to either add a IEEE80211_xxxx_DEBUG() macro definition for your
- * classification, or use IEEE80211_DEBUG(IEEE80211_DL_xxxx, ...) whenever you want
- * to send output to that classification.
- *
- * To add your debug level to the list of levels seen when you perform
- *
- * % cat /proc/net/ipw/debug_level
- *
- * you simply need to add your entry to the ipw_debug_levels array.
- *
- * If you do not see debug_level in /proc/net/ipw then you do not have
- * CONFIG_IEEE80211_DEBUG defined in your kernel configuration
- *
- */
-
-#define IEEE80211_DL_INFO          (1<<0)
-#define IEEE80211_DL_WX            (1<<1)
-#define IEEE80211_DL_SCAN          (1<<2)
-#define IEEE80211_DL_STATE         (1<<3)
-#define IEEE80211_DL_MGMT          (1<<4)
-#define IEEE80211_DL_FRAG          (1<<5)
-#define IEEE80211_DL_EAP           (1<<6)
-#define IEEE80211_DL_DROP          (1<<7)
-
-#define IEEE80211_DL_TX            (1<<8)
-#define IEEE80211_DL_RX            (1<<9)
-
-#define IEEE80211_ERROR(f, a...) printk(KERN_ERR "ieee80211: " f, ## a)
-#define IEEE80211_WARNING(f, a...) printk(KERN_WARNING "ieee80211: " f, ## a)
-#define IEEE80211_DEBUG_INFO(f, a...)   IEEE80211_DEBUG(IEEE80211_DL_INFO, f, ## a)
-
-#define IEEE80211_DEBUG_WX(f, a...)     IEEE80211_DEBUG(IEEE80211_DL_WX, f, ## a)
-#define IEEE80211_DEBUG_SCAN(f, a...)   IEEE80211_DEBUG(IEEE80211_DL_SCAN, f, ## a)
-//#define IEEE_DEBUG_SCAN  IEEE80211_WARNING
-#define IEEE80211_DEBUG_STATE(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_STATE, f, ## a)
-#define IEEE80211_DEBUG_MGMT(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_MGMT, f, ## a)
-#define IEEE80211_DEBUG_FRAG(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_FRAG, f, ## a)
-#define IEEE80211_DEBUG_EAP(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_EAP, f, ## a)
-#define IEEE80211_DEBUG_DROP(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_DROP, f, ## a)
-#define IEEE80211_DEBUG_TX(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_TX, f, ## a)
-#define IEEE80211_DEBUG_RX(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_RX, f, ## a)
-#include <linux/netdevice.h>
-#include <linux/if_arp.h> /* ARPHRD_ETHER */
-
-#ifndef WIRELESS_SPY
-#define WIRELESS_SPY		// enable iwspy support
-#endif
-#include <net/iw_handler.h>	// new driver API
-
-#ifndef ETH_P_PAE
-#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
-#endif /* ETH_P_PAE */
-
-#define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */
-
-#ifndef ETH_P_80211_RAW
-#define ETH_P_80211_RAW (ETH_P_ECONET + 1)
-#endif
-
-/* IEEE 802.11 defines */
-
-#define P80211_OUI_LEN 3
-
-struct ieee80211_snap_hdr {
-
-        u8    dsap;   /* always 0xAA */
-        u8    ssap;   /* always 0xAA */
-        u8    ctrl;   /* always 0x03 */
-        u8    oui[P80211_OUI_LEN];    /* organizational universal id */
-
-} __attribute__ ((packed));
-
-#define SNAP_SIZE sizeof(struct ieee80211_snap_hdr)
-
-#define WLAN_FC_GET_TYPE(fc) ((fc) & IEEE80211_FCTL_FTYPE)
-#define WLAN_FC_GET_STYPE(fc) ((fc) & IEEE80211_FCTL_STYPE)
-
-#define WLAN_GET_SEQ_FRAG(seq) ((seq) & IEEE80211_SCTL_FRAG)
-#define WLAN_GET_SEQ_SEQ(seq)  ((seq) & IEEE80211_SCTL_SEQ)
-
-#define WLAN_CAPABILITY_BSS (1<<0)
-#define WLAN_CAPABILITY_SHORT_SLOT (1<<10)
-
-#define IEEE80211_STATMASK_SIGNAL (1<<0)
-#define IEEE80211_STATMASK_RSSI (1<<1)
-#define IEEE80211_STATMASK_NOISE (1<<2)
-#define IEEE80211_STATMASK_RATE (1<<3)
-#define IEEE80211_STATMASK_WEMASK 0x7
-
-
-#define IEEE80211_CCK_MODULATION    (1<<0)
-#define IEEE80211_OFDM_MODULATION   (1<<1)
-
-#define IEEE80211_24GHZ_BAND     (1<<0)
-#define IEEE80211_52GHZ_BAND     (1<<1)
-
-#define IEEE80211_CCK_RATE_LEN  		4
-#define IEEE80211_CCK_RATE_1MB		        0x02
-#define IEEE80211_CCK_RATE_2MB		        0x04
-#define IEEE80211_CCK_RATE_5MB		        0x0B
-#define IEEE80211_CCK_RATE_11MB		        0x16
-#define IEEE80211_OFDM_RATE_LEN 		8
-#define IEEE80211_OFDM_RATE_6MB		        0x0C
-#define IEEE80211_OFDM_RATE_9MB		        0x12
-#define IEEE80211_OFDM_RATE_12MB		0x18
-#define IEEE80211_OFDM_RATE_18MB		0x24
-#define IEEE80211_OFDM_RATE_24MB		0x30
-#define IEEE80211_OFDM_RATE_36MB		0x48
-#define IEEE80211_OFDM_RATE_48MB		0x60
-#define IEEE80211_OFDM_RATE_54MB		0x6C
-#define IEEE80211_BASIC_RATE_MASK		0x80
-
-#define IEEE80211_CCK_RATE_1MB_MASK		(1<<0)
-#define IEEE80211_CCK_RATE_2MB_MASK		(1<<1)
-#define IEEE80211_CCK_RATE_5MB_MASK		(1<<2)
-#define IEEE80211_CCK_RATE_11MB_MASK		(1<<3)
-#define IEEE80211_OFDM_RATE_6MB_MASK		(1<<4)
-#define IEEE80211_OFDM_RATE_9MB_MASK		(1<<5)
-#define IEEE80211_OFDM_RATE_12MB_MASK		(1<<6)
-#define IEEE80211_OFDM_RATE_18MB_MASK		(1<<7)
-#define IEEE80211_OFDM_RATE_24MB_MASK		(1<<8)
-#define IEEE80211_OFDM_RATE_36MB_MASK		(1<<9)
-#define IEEE80211_OFDM_RATE_48MB_MASK		(1<<10)
-#define IEEE80211_OFDM_RATE_54MB_MASK		(1<<11)
-
-#define IEEE80211_CCK_RATES_MASK	        0x0000000F
-#define IEEE80211_CCK_BASIC_RATES_MASK	(IEEE80211_CCK_RATE_1MB_MASK | \
-	IEEE80211_CCK_RATE_2MB_MASK)
-#define IEEE80211_CCK_DEFAULT_RATES_MASK	(IEEE80211_CCK_BASIC_RATES_MASK | \
-        IEEE80211_CCK_RATE_5MB_MASK | \
-        IEEE80211_CCK_RATE_11MB_MASK)
-
-#define IEEE80211_OFDM_RATES_MASK		0x00000FF0
-#define IEEE80211_OFDM_BASIC_RATES_MASK	(IEEE80211_OFDM_RATE_6MB_MASK | \
-	IEEE80211_OFDM_RATE_12MB_MASK | \
-	IEEE80211_OFDM_RATE_24MB_MASK)
-#define IEEE80211_OFDM_DEFAULT_RATES_MASK	(IEEE80211_OFDM_BASIC_RATES_MASK | \
-	IEEE80211_OFDM_RATE_9MB_MASK  | \
-	IEEE80211_OFDM_RATE_18MB_MASK | \
-	IEEE80211_OFDM_RATE_36MB_MASK | \
-	IEEE80211_OFDM_RATE_48MB_MASK | \
-	IEEE80211_OFDM_RATE_54MB_MASK)
-#define IEEE80211_DEFAULT_RATES_MASK (IEEE80211_OFDM_DEFAULT_RATES_MASK | \
-                                IEEE80211_CCK_DEFAULT_RATES_MASK)
-
-#define IEEE80211_NUM_OFDM_RATES	    8
-#define IEEE80211_NUM_CCK_RATES	            4
-#define IEEE80211_OFDM_SHIFT_MASK_A         4
-
-/* this is stolen and modified from the madwifi driver*/
-#define IEEE80211_FC0_TYPE_MASK		0x0c
-#define IEEE80211_FC0_TYPE_DATA		0x08
-#define IEEE80211_FC0_SUBTYPE_MASK	0xB0
-#define IEEE80211_FC0_SUBTYPE_QOS	0x80
-
-#define IEEE80211_QOS_HAS_SEQ(fc) \
-	(((fc) & (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) == \
-	 (IEEE80211_FC0_TYPE_DATA | IEEE80211_FC0_SUBTYPE_QOS))
-
-/* this is stolen from ipw2200 driver */
-#define IEEE_IBSS_MAC_HASH_SIZE 31
-struct ieee_ibss_seq {
-	u8 mac[ETH_ALEN];
-	u16 seq_num[17];
-	u16 frag_num[17];
-	unsigned long packet_time[17];
-	struct list_head list;
-};
-
-/* NOTE: This data is for statistical purposes; not all hardware provides this
- *       information for frames received.  Not setting these will not cause
- *       any adverse affects. */
-struct ieee80211_rx_stats {
-	u32 mac_time[2];
-	u8 signalstrength;
-	s8 rssi;
-	u8 signal;
-	u8 noise;
-	u16 rate; /* in 100 kbps */
-	u8 received_channel;
-	u8 control;
-	u8 mask;
-	u8 freq;
-	u16 len;
-	u8 nic_type;
-};
-
-/* IEEE 802.11 requires that STA supports concurrent reception of at least
- * three fragmented frames. This define can be increased to support more
- * concurrent frames, but it should be noted that each entry can consume about
- * 2 kB of RAM and increasing cache size will slow down frame reassembly. */
-#define IEEE80211_FRAG_CACHE_LEN 4
-
-struct ieee80211_frag_entry {
-	unsigned long first_frag_time;
-	unsigned int seq;
-	unsigned int last_frag;
-	struct sk_buff *skb;
-	u8 src_addr[ETH_ALEN];
-	u8 dst_addr[ETH_ALEN];
-};
-
-struct ieee80211_stats {
-	unsigned int tx_unicast_frames;
-	unsigned int tx_multicast_frames;
-	unsigned int tx_fragments;
-	unsigned int tx_unicast_octets;
-	unsigned int tx_multicast_octets;
-	unsigned int tx_deferred_transmissions;
-	unsigned int tx_single_retry_frames;
-	unsigned int tx_multiple_retry_frames;
-	unsigned int tx_retry_limit_exceeded;
-	unsigned int tx_discards;
-	unsigned int rx_unicast_frames;
-	unsigned int rx_multicast_frames;
-	unsigned int rx_fragments;
-	unsigned int rx_unicast_octets;
-	unsigned int rx_multicast_octets;
-	unsigned int rx_fcs_errors;
-	unsigned int rx_discards_no_buffer;
-	unsigned int tx_discards_wrong_sa;
-	unsigned int rx_discards_undecryptable;
-	unsigned int rx_message_in_msg_fragments;
-	unsigned int rx_message_in_bad_msg_fragments;
-};
-
-struct ieee80211_device;
-
-#include "ieee80211_crypt.h"
-
-#define SEC_KEY_1         (1<<0)
-#define SEC_KEY_2         (1<<1)
-#define SEC_KEY_3         (1<<2)
-#define SEC_KEY_4         (1<<3)
-#define SEC_ACTIVE_KEY    (1<<4)
-#define SEC_AUTH_MODE     (1<<5)
-#define SEC_UNICAST_GROUP (1<<6)
-#define SEC_LEVEL         (1<<7)
-#define SEC_ENABLED       (1<<8)
-
-#define SEC_LEVEL_0      0 /* None */
-#define SEC_LEVEL_1      1 /* WEP 40 and 104 bit */
-#define SEC_LEVEL_2      2 /* Level 1 + TKIP */
-#define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */
-#define SEC_LEVEL_3      4 /* Level 2 + CCMP */
-
-#define WEP_KEYS 4
-#define WEP_KEY_LEN 13
-
-#define WEP_KEY_LEN_MODIF 32
-
-struct ieee80211_security {
-	u16 active_key:2,
-            enabled:1,
-	    auth_mode:2,
-            auth_algo:4,
-            unicast_uses_group:1;
-	u8 key_sizes[WEP_KEYS];
-	u8 keys[WEP_KEYS][WEP_KEY_LEN_MODIF];
-	u8 level;
-	u16 flags;
-} __attribute__ ((packed));
-
-
-/*
-
- 802.11 data frame from AP
-
-      ,-------------------------------------------------------------------.
-Bytes |  2   |  2   |    6    |    6    |    6    |  2   | 0..2312 |   4  |
-      |------|------|---------|---------|---------|------|---------|------|
-Desc. | ctrl | dura |  DA/RA  |   TA    |    SA   | Sequ |  frame  |  fcs |
-      |      | tion | (BSSID) |         |         | ence |  data   |      |
-      `-------------------------------------------------------------------'
-
-Total: 28-2340 bytes
-
-*/
-
-/* Management Frame Information Element Types */
-enum {
-	MFIE_TYPE_SSID = 0,
-	MFIE_TYPE_RATES = 1,
-	MFIE_TYPE_FH_SET = 2,
-	MFIE_TYPE_DS_SET = 3,
-	MFIE_TYPE_CF_SET = 4,
-	MFIE_TYPE_TIM = 5,
-	MFIE_TYPE_IBSS_SET = 6,
-	MFIE_TYPE_COUNTRY = 7,
-	MFIE_TYPE_CHALLENGE = 16,
-	MFIE_TYPE_ERP = 42,
-	MFIE_TYPE_RSN = 48,
-	MFIE_TYPE_RATES_EX = 50,
-	MFIE_TYPE_GENERIC = 221,
-};
-
-struct ieee80211_header_data {
-	__le16 frame_ctl;
-	u16 duration_id;
-	u8 addr1[6];
-	u8 addr2[6];
-	u8 addr3[6];
-	u16 seq_ctrl;
-};
-
-struct ieee80211_hdr_4addr {
-	__le16 frame_ctl;
-	u16 duration_id;
-	u8 addr1[ETH_ALEN];
-	u8 addr2[ETH_ALEN];
-	u8 addr3[ETH_ALEN];
-	u16 seq_ctl;
-	u8 addr4[ETH_ALEN];
-} __attribute__ ((packed));
-
-struct ieee80211_hdr_3addrqos {
-	u16 frame_ctl;
-	u16 duration_id;
-	u8 addr1[ETH_ALEN];
-	u8 addr2[ETH_ALEN];
-	u8 addr3[ETH_ALEN];
-	u16 seq_ctl;
-	u16 qos_ctl;
-} __attribute__ ((packed));
-
-struct ieee80211_hdr_4addrqos {
-	u16 frame_ctl;
-	u16 duration_id;
-	u8 addr1[ETH_ALEN];
-	u8 addr2[ETH_ALEN];
-	u8 addr3[ETH_ALEN];
-	u16 seq_ctl;
-	u8 addr4[ETH_ALEN];
-	u16 qos_ctl;
-} __attribute__ ((packed));
-
-struct ieee80211_info_element_hdr {
-	u8 id;
-	u8 len;
-} __attribute__ ((packed));
-
-struct ieee80211_info_element {
-	u8 id;
-	u8 len;
-	u8 data[0];
-} __attribute__ ((packed));
-
-struct ieee80211_authentication {
-	struct ieee80211_header_data header;
-	u16 algorithm;
-	u16 transaction;
-	u16 status;
-	//struct ieee80211_info_element_hdr info_element;
-} __attribute__ ((packed));
-
-struct ieee80211_disassoc_frame {
-	struct ieee80211_hdr_3addr header;
-	u16    reasoncode;
-} __attribute__ ((packed));
-
-struct ieee80211_probe_request {
-	struct ieee80211_header_data header;
-	/* struct ieee80211_info_element info_element; */
-} __attribute__ ((packed));
-
-struct ieee80211_probe_response {
-	struct ieee80211_header_data header;
-	u32 time_stamp[2];
-	u16 beacon_interval;
-	u16 capability;
-	struct ieee80211_info_element info_element;
-} __attribute__ ((packed));
-
-struct ieee80211_assoc_request_frame {
-	struct ieee80211_hdr_3addr header;
-	u16 capability;
-	u16 listen_interval;
-	//u8 current_ap[ETH_ALEN];
-	struct ieee80211_info_element_hdr info_element;
-} __attribute__ ((packed));
-
-struct ieee80211_assoc_response_frame {
-	struct ieee80211_hdr_3addr header;
-	u16 capability;
-	u16 status;
-	u16 aid;
-	struct ieee80211_info_element info_element; /* supported rates */
-} __attribute__ ((packed));
-
-struct ieee80211_txb {
-	u8 nr_frags;
-	u8 encrypted;
-	u16 reserved;
-	u16 frag_size;
-	u16 payload_size;
-	struct sk_buff *fragments[0];
-};
-
-/* SWEEP TABLE ENTRIES NUMBER */
-#define MAX_SWEEP_TAB_ENTRIES			42
-#define MAX_SWEEP_TAB_ENTRIES_PER_PACKET	7
-
-/* MAX_RATES_LENGTH needs to be 12.  The spec says 8, and many APs
- * only use 8, and then use extended rates for the remaining supported
- * rates.  Other APs, however, stick all of their supported rates on the
- * main rates information element... */
-#define MAX_RATES_LENGTH			((u8)12)
-#define MAX_RATES_EX_LENGTH			((u8)16)
-
-#define MAX_NETWORK_COUNT			128
-
-#define MAX_CHANNEL_NUMBER			165
-
-#define IEEE80211_SOFTMAC_SCAN_TIME		100 /* (HZ / 2) */
-#define IEEE80211_SOFTMAC_ASSOC_RETRY_TIME	(HZ * 2)
-
-#define CRC_LENGTH	4U
-
-#define MAX_WPA_IE_LEN	64
-
-#define NETWORK_EMPTY_ESSID	(1 << 0)
-#define NETWORK_HAS_OFDM	(1 << 1)
-#define NETWORK_HAS_CCK		(1 << 2)
-
-struct ieee80211_wmm_ac_param {
-	u8 ac_aci_acm_aifsn;
-	u8 ac_ecwmin_ecwmax;
-	u16 ac_txop_limit;
-};
-
-struct ieee80211_wmm_ts_info {
-	u8 ac_dir_tid;
-	u8 ac_up_psb;
-	u8 reserved;
-} __attribute__ ((packed));
-
-struct ieee80211_wmm_tspec_elem {
-	struct ieee80211_wmm_ts_info ts_info;
-	u16 norm_msdu_size;
-	u16 max_msdu_size;
-	u32 min_serv_inter;
-	u32 max_serv_inter;
-	u32 inact_inter;
-	u32 suspen_inter;
-	u32 serv_start_time;
-	u32 min_data_rate;
-	u32 mean_data_rate;
-	u32 peak_data_rate;
-	u32 max_burst_size;
-	u32 delay_bound;
-	u32 min_phy_rate;
-	u16 surp_band_allow;
-	u16 medium_time;
-}__attribute__((packed));
-
-enum eap_type {
-	EAP_PACKET = 0,
-	EAPOL_START,
-	EAPOL_LOGOFF,
-	EAPOL_KEY,
-	EAPOL_ENCAP_ASF_ALERT
-};
-
-static const char *eap_types[] = {
-	[EAP_PACKET]		= "EAP-Packet",
-	[EAPOL_START]		= "EAPOL-Start",
-	[EAPOL_LOGOFF]		= "EAPOL-Logoff",
-	[EAPOL_KEY]		= "EAPOL-Key",
-	[EAPOL_ENCAP_ASF_ALERT]	= "EAPOL-Encap-ASF-Alert"
-};
-
-static inline const char *eap_get_type(int type)
-{
-	return (type >= ARRAY_SIZE(eap_types)) ? "Unknown" : eap_types[type];
-}
-
-struct eapol {
-	u8 snap[6];
-	u16 ethertype;
-	u8 version;
-	u8 type;
-	u16 length;
-} __attribute__ ((packed));
-
-struct ieee80211_softmac_stats {
-	unsigned int rx_ass_ok;
-	unsigned int rx_ass_err;
-	unsigned int rx_probe_rq;
-	unsigned int tx_probe_rs;
-	unsigned int tx_beacons;
-	unsigned int rx_auth_rq;
-	unsigned int rx_auth_rs_ok;
-	unsigned int rx_auth_rs_err;
-	unsigned int tx_auth_rq;
-	unsigned int no_auth_rs;
-	unsigned int no_ass_rs;
-	unsigned int tx_ass_rq;
-	unsigned int rx_ass_rq;
-	unsigned int tx_probe_rq;
-	unsigned int reassoc;
-	unsigned int swtxstop;
-	unsigned int swtxawake;
-};
-
-#define BEACON_PROBE_SSID_ID_POSITION 12
-
-/*
- * These are the data types that can make up management packets
- *
-	u16 auth_algorithm;
-	u16 auth_sequence;
-	u16 beacon_interval;
-	u16 capability;
-	u8 current_ap[ETH_ALEN];
-	u16 listen_interval;
-	struct {
-		u16 association_id:14, reserved:2;
-	} __attribute__ ((packed));
-	u32 time_stamp[2];
-	u16 reason;
-	u16 status;
-*/
-
-#define IEEE80211_DEFAULT_TX_ESSID "Penguin"
-#define IEEE80211_DEFAULT_BASIC_RATE 10
-
-enum {WMM_all_frame, WMM_two_frame, WMM_four_frame, WMM_six_frame};
-#define MAX_SP_Len  (WMM_all_frame << 4)
-#define IEEE80211_QOS_TID 0x0f
-#define QOS_CTL_NOTCONTAIN_ACK (0x01 << 5)
-
-#define MAX_IE_LEN						0xFF //+YJ,080625
-
-struct rtl8187se_channel_list {
-	u8	channel[MAX_CHANNEL_NUMBER + 1];
-	u8	len;
-};
-
-//by amy for ps
-#define IEEE80211_WATCH_DOG_TIME    2000
-//by amy for ps
-//by amy for antenna
-#define ANTENNA_DIVERSITY_TIMER_PERIOD		1000 // 1000 m
-//by amy for antenna
-
-#define IEEE80211_DTIM_MBCAST 4
-#define IEEE80211_DTIM_UCAST 2
-#define IEEE80211_DTIM_VALID 1
-#define IEEE80211_DTIM_INVALID 0
-
-#define IEEE80211_PS_DISABLED 0
-#define IEEE80211_PS_UNICAST IEEE80211_DTIM_UCAST
-#define IEEE80211_PS_MBCAST IEEE80211_DTIM_MBCAST
-#define IEEE80211_PS_ENABLE   IEEE80211_DTIM_VALID
-//added by David for QoS 2006/6/30
-//#define WMM_Hang_8187
-#ifdef WMM_Hang_8187
-#undef WMM_Hang_8187
-#endif
-
-#define WME_AC_BE   0x00
-#define WME_AC_BK   0x01
-#define WME_AC_VI   0x02
-#define WME_AC_VO   0x03
-#define WME_ACI_MASK 0x03
-#define WME_AIFSN_MASK 0x03
-#define WME_AC_PRAM_LEN 16
-
-//UP Mapping to AC, using in MgntQuery_SequenceNumber() and maybe for DSCP
-//#define UP2AC(up)	((up<3) ? ((up==0)?1:0) : (up>>1))
-#define UP2AC(up) (		   \
-	((up) < 1) ? WME_AC_BE : \
-	((up) < 3) ? WME_AC_BK : \
-	((up) < 4) ? WME_AC_BE : \
-	((up) < 6) ? WME_AC_VI : \
-	WME_AC_VO)
-//AC Mapping to UP, using in Tx part for selecting the corresponding TX queue
-#define AC2UP(_ac)	(       \
-	((_ac) == WME_AC_VO) ? 6 : \
-	((_ac) == WME_AC_VI) ? 5 : \
-	((_ac) == WME_AC_BK) ? 1 : \
-	0)
-
-#define	ETHER_ADDR_LEN		6	/* length of an Ethernet address */
-struct	ether_header {
-	u8 ether_dhost[ETHER_ADDR_LEN];
-	u8 ether_shost[ETHER_ADDR_LEN];
-	u16 ether_type;
-} __attribute__((packed));
-
-#ifndef ETHERTYPE_PAE
-#define	ETHERTYPE_PAE	0x888e		/* EAPOL PAE/802.1x */
-#endif
-#ifndef ETHERTYPE_IP
-#define	ETHERTYPE_IP	0x0800		/* IP protocol */
-#endif
-
-struct ieee80211_network {
-	/* These entries are used to identify a unique network */
-	u8 bssid[ETH_ALEN];
-	u8 channel;
-	/* Ensure null-terminated for any debug msgs */
-	u8 ssid[IW_ESSID_MAX_SIZE + 1];
-	u8 ssid_len;
-
-	/* These are network statistics */
-	struct ieee80211_rx_stats stats;
-	u16 capability;
-	u8 rates[MAX_RATES_LENGTH];
-	u8 rates_len;
-	u8 rates_ex[MAX_RATES_EX_LENGTH];
-	u8 rates_ex_len;
-	unsigned long last_scanned;
-	u8 mode;
-	u8 flags;
-	u32 last_associate;
-	u32 time_stamp[2];
-	u16 beacon_interval;
-	u16 listen_interval;
-	u16 atim_window;
-	u8 wpa_ie[MAX_WPA_IE_LEN];
-	size_t wpa_ie_len;
-	u8 rsn_ie[MAX_WPA_IE_LEN];
-	size_t rsn_ie_len;
-	u8 dtim_period;
-	u8 dtim_data;
-	u32 last_dtim_sta_time[2];
-	struct list_head list;
-	//appeded for QoS
-	u8 wmm_info;
-	struct ieee80211_wmm_ac_param wmm_param[4];
-	u8 QoS_Enable;
-	u8 SignalStrength;
-//by amy 080312
-	u8 HighestOperaRate;
-//by amy 080312
-	u8 Turbo_Enable;//enable turbo mode, added by thomas
-	u16 CountryIeLen;
-	u8 CountryIeBuf[MAX_IE_LEN];
-};
-
-enum ieee80211_state {
-
-	/* the card is not linked at all */
-	IEEE80211_NOLINK = 0,
-
-	/* IEEE80211_ASSOCIATING* are for BSS client mode
-	 * the driver shall not perform RX filtering unless
-	 * the state is LINKED.
-	 * The driver shall just check for the state LINKED and
-	 * defaults to NOLINK for ALL the other states (including
-	 * LINKED_SCANNING)
-	 */
-
-	/* the association procedure will start (wq scheduling)*/
-	IEEE80211_ASSOCIATING,
-	IEEE80211_ASSOCIATING_RETRY,
-
-	/* the association procedure is sending AUTH request*/
-	IEEE80211_ASSOCIATING_AUTHENTICATING,
-
-	/* the association procedure has successfully authenticated
-	 * and is sending association request
-	 */
-	IEEE80211_ASSOCIATING_AUTHENTICATED,
-
-	/* the link is ok. the card associated to a BSS or linked
-	 * to a ibss cell or acting as an AP and creating the bss
-	 */
-	IEEE80211_LINKED,
-
-	/* same as LINKED, but the driver shall apply RX filter
-	 * rules as we are in NO_LINK mode. As the card is still
-	 * logically linked, but it is doing a syncro site survey
-	 * then it will be back to LINKED state.
-	 */
-	IEEE80211_LINKED_SCANNING,
-
-};
-
-#define DEFAULT_MAX_SCAN_AGE (15 * HZ)
-#define DEFAULT_FTS 2346
-
-#define CFG_IEEE80211_RESERVE_FCS (1<<0)
-#define CFG_IEEE80211_COMPUTE_FCS (1<<1)
-
-typedef struct tx_pending_t{
-	int frag;
-	struct ieee80211_txb *txb;
-}tx_pending_t;
-
-enum {
-	COUNTRY_CODE_FCC = 0,
-	COUNTRY_CODE_IC = 1,
-	COUNTRY_CODE_ETSI = 2,
-	COUNTRY_CODE_SPAIN = 3,
-	COUNTRY_CODE_FRANCE = 4,
-	COUNTRY_CODE_MKK = 5,
-	COUNTRY_CODE_MKK1 = 6,
-	COUNTRY_CODE_ISRAEL = 7,
-	COUNTRY_CODE_TELEC = 8,
-	COUNTRY_CODE_GLOBAL_DOMAIN = 9,
-	COUNTRY_CODE_WORLD_WIDE_13_INDEX = 10
-};
-
-struct ieee80211_device {
-	struct net_device *dev;
-
-	/* Bookkeeping structures */
-	struct net_device_stats stats;
-	struct ieee80211_stats ieee_stats;
-	struct ieee80211_softmac_stats softmac_stats;
-
-	/* Probe / Beacon management */
-	struct list_head network_free_list;
-	struct list_head network_list;
-	struct ieee80211_network *networks;
-	int scans;
-	int scan_age;
-
-	int iw_mode; /* operating mode (IW_MODE_*) */
-
-	spinlock_t lock;
-	spinlock_t wpax_suitlist_lock;
-
-	int tx_headroom; /* Set to size of any additional room needed at front
-			  * of allocated Tx SKBs */
-	u32 config;
-
-	/* WEP and other encryption related settings at the device level */
-	int open_wep; /* Set to 1 to allow unencrypted frames */
-
-	int reset_on_keychange; /* Set to 1 if the HW needs to be reset on
-				 * WEP key changes */
-
-	/* If the host performs {en,de}cryption, then set to 1 */
-	int host_encrypt;
-	int host_decrypt;
-	int ieee802_1x; /* is IEEE 802.1X used */
-
-	/* WPA data */
-	int wpa_enabled;
-	int drop_unencrypted;
-	int tkip_countermeasures;
-	int privacy_invoked;
-	size_t wpa_ie_len;
-	u8 *wpa_ie;
-
-	u8 ap_mac_addr[6];
-	u16 pairwise_key_type;
-	u16 broadcast_key_type;
-
-	struct list_head crypt_deinit_list;
-	struct ieee80211_crypt_data *crypt[WEP_KEYS];
-	int tx_keyidx; /* default TX key index (crypt[tx_keyidx]) */
-	struct timer_list crypt_deinit_timer;
-
-	int bcrx_sta_key; /* use individual keys to override default keys even
-			   * with RX of broad/multicast frames */
-
-	/* Fragmentation structures */
-	/* each stream contains an entry */
-	struct ieee80211_frag_entry frag_cache[17][IEEE80211_FRAG_CACHE_LEN];
-	unsigned int frag_next_idx[17];
-	u16 fts; /* Fragmentation Threshold */
-
-	/* This stores infos for the current network.
-	 * Either the network we are associated in INFRASTRUCTURE
-	 * or the network that we are creating in MASTER mode.
-	 * ad-hoc is a mixture ;-).
-	 * Note that in infrastructure mode, even when not associated,
-	 * fields bssid and essid may be valid (if wpa_set and essid_set
-	 * are true) as thy carry the value set by the user via iwconfig
-	 */
-	struct ieee80211_network current_network;
-
-
-	enum ieee80211_state state;
-
-	int short_slot;
-	int mode;       /* A, B, G */
-	int modulation; /* CCK, OFDM */
-	int freq_band;  /* 2.4Ghz, 5.2Ghz, Mixed */
-	int abg_true;   /* ABG flag              */
-
-	/* used for forcing the ibss workqueue to terminate
-	 * without wait for the syncro scan to terminate
-	 */
-	short sync_scan_hurryup;
-
-	void * pDot11dInfo;
-	bool bGlobalDomain;
-
-	// For Liteon Ch12~13 passive scan
-	u8	MinPassiveChnlNum;
-	u8	IbssStartChnl;
-
-	int rate;       /* current rate */
-	int basic_rate;
-	//FIXME: please callback, see if redundant with softmac_features
-	short active_scan;
-
-	/* this contains flags for selectively enable softmac support */
-	u16 softmac_features;
-
-	/* if the sequence control field is not filled by HW */
-	u16 seq_ctrl[5];
-
-	/* association procedure transaction sequence number */
-	u16 associate_seq;
-
-	/* AID for RTXed association responses */
-	u16 assoc_id;
-
-	/* power save mode related*/
-	short ps;
-	short sta_sleep;
-	int ps_timeout;
-	struct tasklet_struct ps_task;
-	u32 ps_th;
-	u32 ps_tl;
-
-	short raw_tx;
-	/* used if IEEE_SOFTMAC_TX_QUEUE is set */
-	short queue_stop;
-	short scanning;
-	short proto_started;
-
-	struct semaphore wx_sem;
-	struct semaphore scan_sem;
-
-	spinlock_t mgmt_tx_lock;
-	spinlock_t beacon_lock;
-
-	short beacon_txing;
-
-	short wap_set;
-	short ssid_set;
-
-	u8  wpax_type_set;    //{added by David, 2006.9.28}
-	u32 wpax_type_notify; //{added by David, 2006.9.26}
-
-	/* QoS related flag */
-	char init_wmmparam_flag;
-
-	/* for discarding duplicated packets in IBSS */
-	struct list_head ibss_mac_hash[IEEE_IBSS_MAC_HASH_SIZE];
-
-	/* for discarding duplicated packets in BSS */
-	u16 last_rxseq_num[17]; /* rx seq previous per-tid */
-	u16 last_rxfrag_num[17];/* tx frag previous per-tid */
-	unsigned long last_packet_time[17];
-
-	/* for PS mode */
-	unsigned long last_rx_ps_time;
-
-	/* used if IEEE_SOFTMAC_SINGLE_QUEUE is set */
-	struct sk_buff *mgmt_queue_ring[MGMT_QUEUE_NUM];
-	int mgmt_queue_head;
-	int mgmt_queue_tail;
-
-
-	/* used if IEEE_SOFTMAC_TX_QUEUE is set */
-	struct  tx_pending_t tx_pending;
-
-	/* used if IEEE_SOFTMAC_ASSOCIATE is set */
-	struct timer_list associate_timer;
-
-	/* used if IEEE_SOFTMAC_BEACONS is set */
-	struct timer_list beacon_timer;
-
-	struct work_struct associate_complete_wq;
-//	struct work_struct associate_retry_wq;
-	struct work_struct associate_procedure_wq;
-//	struct work_struct softmac_scan_wq;
-	struct work_struct wx_sync_scan_wq;
-	struct work_struct wmm_param_update_wq;
-	struct work_struct ps_request_tx_ack_wq;//for ps
-//	struct work_struct hw_wakeup_wq;
-//	struct work_struct hw_sleep_wq;
-//	struct work_struct watch_dog_wq;
-	bool bInactivePs;
-	bool actscanning;
-	bool beinretry;
-	u16 ListenInterval;
-	unsigned long NumRxDataInPeriod; //YJ,add,080828
-	unsigned long NumRxBcnInPeriod;  //YJ,add,080828
-	unsigned long NumRxOkTotal;
-	unsigned long NumRxUnicast;//YJ,add,080828,for keep alive
-	bool bHwRadioOff;
-        struct delayed_work softmac_scan_wq;
-        struct delayed_work associate_retry_wq;
-	struct delayed_work hw_wakeup_wq;
-	struct delayed_work hw_sleep_wq;//+by amy 080324
-	struct delayed_work watch_dog_wq;
-	struct delayed_work sw_antenna_wq;
-	struct delayed_work  start_ibss_wq;
-//by amy for rate adaptive 080312
-    struct delayed_work rate_adapter_wq;
-//by amy for rate adaptive
-	struct delayed_work hw_dig_wq;
-	struct delayed_work tx_pw_wq;
-
-//Added for RF power on power off by lizhaoming 080512
-	struct delayed_work GPIOChangeRFWorkItem;
-
-	struct workqueue_struct *wq;
-
-	/* Callback functions */
-	void (*set_security)(struct net_device *dev,
-			     struct ieee80211_security *sec);
-
-	/* Used to TX data frame by using txb structs.
-	 * this is not used if in the softmac_features
-	 * is set the flag IEEE_SOFTMAC_TX_QUEUE
-	 */
-	int (*hard_start_xmit)(struct ieee80211_txb *txb,
-			       struct net_device *dev);
-
-	int (*reset_port)(struct net_device *dev);
-
-	/* Softmac-generated frames (management) are TXed via this
-	 * callback if the flag IEEE_SOFTMAC_SINGLE_QUEUE is
-	 * not set. As some cards may have different HW queues that
-	 * one might want to use for data and management frames
-	 * the option to have two callbacks might be useful.
-	 * This function can't sleep.
-	 */
-	int (*softmac_hard_start_xmit)(struct sk_buff *skb,
-			       struct net_device *dev);
-
-	/* used instead of hard_start_xmit (not softmac_hard_start_xmit)
-	 * if the IEEE_SOFTMAC_TX_QUEUE feature is used to TX data
-	 * frames. If the option IEEE_SOFTMAC_SINGLE_QUEUE is also set
-	 * then also management frames are sent via this callback.
-	 * This function can't sleep.
-	 */
-	void (*softmac_data_hard_start_xmit)(struct sk_buff *skb,
-			       struct net_device *dev,int rate);
-
-	/* stops the HW queue for DATA frames. Useful to avoid
-	 * waste time to TX data frame when we are reassociating
-	 * This function can sleep.
-	 */
-	void (*data_hard_stop)(struct net_device *dev);
-
-	/* OK this is complementar to data_poll_hard_stop */
-	void (*data_hard_resume)(struct net_device *dev);
-
-	/* ask to the driver to retune the radio .
-	 * This function can sleep. the driver should ensure
-	 * the radio has been switched before return.
-	 */
-	void (*set_chan)(struct net_device *dev,short ch);
-
-	/* These are not used if the ieee stack takes care of
-	 * scanning (IEEE_SOFTMAC_SCAN feature set).
-	 * In this case only the set_chan is used.
-	 *
-	 * The syncro version is similar to the start_scan but
-	 * does not return until all channels has been scanned.
-	 * this is called in user context and should sleep,
-	 * it is called in a work_queue when switching to ad-hoc mode
-	 * or in behalf of iwlist scan when the card is associated
-	 * and root user ask for a scan.
-	 * the function stop_scan should stop both the syncro and
-	 * background scanning and can sleep.
-	 * The function start_scan should initiate the background
-	 * scanning and can't sleep.
-	 */
-	void (*scan_syncro)(struct net_device *dev);
-	void (*start_scan)(struct net_device *dev);
-	void (*stop_scan)(struct net_device *dev);
-
-	/* indicate the driver that the link state is changed
-	 * for example it may indicate the card is associated now.
-	 * Driver might be interested in this to apply RX filter
-	 * rules or simply light the LINK led
-	 */
-	void (*link_change)(struct net_device *dev);
-
-	/* these two function indicates to the HW when to start
-	 * and stop to send beacons. This is used when the
-	 * IEEE_SOFTMAC_BEACONS is not set. For now the
-	 * stop_send_bacons is NOT guaranteed to be called only
-	 * after start_send_beacons.
-	 */
-	void (*start_send_beacons) (struct net_device *dev);
-	void (*stop_send_beacons) (struct net_device *dev);
-
-	/* power save mode related */
-	void (*sta_wake_up) (struct net_device *dev);
-	void (*ps_request_tx_ack) (struct net_device *dev);
-	void (*enter_sleep_state) (struct net_device *dev, u32 th, u32 tl);
-	short (*ps_is_queue_empty) (struct net_device *dev);
-
-	/* QoS related */
-	//void (*wmm_param_update) (struct net_device *dev, u8 *ac_param);
-	//void (*wmm_param_update) (struct ieee80211_device *ieee);
-
-	/* This must be the last item so that it points to the data
-	 * allocated beyond this structure by alloc_ieee80211 */
-	u8 priv[0];
-};
-
-#define IEEE_A            (1<<0)
-#define IEEE_B            (1<<1)
-#define IEEE_G            (1<<2)
-#define IEEE_MODE_MASK    (IEEE_A|IEEE_B|IEEE_G)
-
-/* Generate a 802.11 header */
-
-/* Uses the channel change callback directly
- * instead of [start/stop] scan callbacks
- */
-#define IEEE_SOFTMAC_SCAN (1<<2)
-
-/* Perform authentication and association handshake */
-#define IEEE_SOFTMAC_ASSOCIATE (1<<3)
-
-/* Generate probe requests */
-#define IEEE_SOFTMAC_PROBERQ (1<<4)
-
-/* Generate response to probe requests */
-#define IEEE_SOFTMAC_PROBERS (1<<5)
-
-/* The ieee802.11 stack will manages the netif queue
- * wake/stop for the driver, taking care of 802.11
- * fragmentation. See softmac.c for details. */
-#define IEEE_SOFTMAC_TX_QUEUE (1<<7)
-
-/* Uses only the softmac_data_hard_start_xmit
- * even for TX management frames.
- */
-#define IEEE_SOFTMAC_SINGLE_QUEUE (1<<8)
-
-/* Generate beacons.  The stack will enqueue beacons
- * to the card
- */
-#define IEEE_SOFTMAC_BEACONS (1<<6)
-
-
-
-static inline void *ieee80211_priv(struct net_device *dev)
-{
-	return ((struct ieee80211_device *)netdev_priv(dev))->priv;
-}
-
-static inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
-{
-	/* Single white space is for Linksys APs */
-	if (essid_len == 1 && essid[0] == ' ')
-		return 1;
-
-	/* Otherwise, if the entire essid is 0, we assume it is hidden */
-	while (essid_len) {
-		essid_len--;
-		if (essid[essid_len] != '\0')
-			return 0;
-	}
-
-	return 1;
-}
-
-static inline int ieee80211_is_valid_mode(struct ieee80211_device *ieee,
-					  int mode)
-{
-	/*
-	 * It is possible for both access points and our device to support
-	 * combinations of modes, so as long as there is one valid combination
-	 * of ap/device supported modes, then return success
-	 *
-	 */
-	if ((mode & IEEE_A) &&
-	    (ieee->modulation & IEEE80211_OFDM_MODULATION) &&
-	    (ieee->freq_band & IEEE80211_52GHZ_BAND))
-		return 1;
-
-	if ((mode & IEEE_G) &&
-	    (ieee->modulation & IEEE80211_OFDM_MODULATION) &&
-	    (ieee->freq_band & IEEE80211_24GHZ_BAND))
-		return 1;
-
-	if ((mode & IEEE_B) &&
-	    (ieee->modulation & IEEE80211_CCK_MODULATION) &&
-	    (ieee->freq_band & IEEE80211_24GHZ_BAND))
-		return 1;
-
-	return 0;
-}
-
-static inline int ieee80211_get_hdrlen(u16 fc)
-{
-	int hdrlen = 24;
-
-	switch (WLAN_FC_GET_TYPE(fc)) {
-	case IEEE80211_FTYPE_DATA:
-		if ((fc & IEEE80211_FCTL_FROMDS) && (fc & IEEE80211_FCTL_TODS))
-			hdrlen = 30; /* Addr4 */
-		if(IEEE80211_QOS_HAS_SEQ(fc))
-			hdrlen += 2; /* QOS ctrl*/
-		break;
-	case IEEE80211_FTYPE_CTL:
-		switch (WLAN_FC_GET_STYPE(fc)) {
-		case IEEE80211_STYPE_CTS:
-		case IEEE80211_STYPE_ACK:
-			hdrlen = 10;
-			break;
-		default:
-			hdrlen = 16;
-			break;
-		}
-		break;
-	}
-
-	return hdrlen;
-}
-
-
-
-/* ieee80211.c */
-extern void free_ieee80211(struct net_device *dev);
-extern struct net_device *alloc_ieee80211(int sizeof_priv);
-
-extern int ieee80211_set_encryption(struct ieee80211_device *ieee);
-
-/* ieee80211_tx.c */
-
-extern int ieee80211_encrypt_fragment(struct ieee80211_device *ieee,
-				      struct sk_buff *frag, int hdr_len);
-
-extern int ieee80211_rtl_xmit(struct sk_buff *skb, struct net_device *dev);
-extern void ieee80211_txb_free(struct ieee80211_txb *);
-
-
-/* ieee80211_rx.c */
-extern int ieee80211_rtl_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
-			    struct ieee80211_rx_stats *rx_stats);
-extern void ieee80211_rx_mgt(struct ieee80211_device *ieee,
-			     struct ieee80211_hdr_4addr *header,
-			     struct ieee80211_rx_stats *stats);
-
-/* ieee80211_wx.c */
-extern int ieee80211_wx_get_scan(struct ieee80211_device *ieee,
-				 struct iw_request_info *info,
-				 union iwreq_data *wrqu, char *key);
-extern int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
-				   struct iw_request_info *info,
-				   union iwreq_data *wrqu, char *key);
-extern int ieee80211_wx_get_encode(struct ieee80211_device *ieee,
-				   struct iw_request_info *info,
-				   union iwreq_data *wrqu, char *key);
-extern int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee,
-				       struct iw_request_info *info,
-				       union iwreq_data *wrqu, char *extra);
-int ieee80211_wx_set_auth(struct ieee80211_device *ieee,
-			  struct iw_request_info *info,
-			  struct iw_param *data, char *extra);
-int ieee80211_wx_set_mlme(struct ieee80211_device *ieee,
-			  struct iw_request_info *info,
-			  union iwreq_data *wrqu, char *extra);
-
-int ieee80211_wx_set_gen_ie(struct ieee80211_device *ieee, u8 *ie, size_t len);
-/* ieee80211_softmac.c */
-extern short ieee80211_is_54g(const struct ieee80211_network *net);
-extern short ieee80211_is_shortslot(const struct ieee80211_network *net);
-extern int ieee80211_rx_frame_softmac(struct ieee80211_device *ieee,
-				      struct sk_buff *skb,
-				      struct ieee80211_rx_stats *rx_stats,
-				      u16 type, u16 stype);
-extern void ieee80211_softmac_new_net(struct ieee80211_device *ieee,
-				      struct ieee80211_network *net);
-
-extern void ieee80211_softmac_xmit(struct ieee80211_txb *txb,
-				   struct ieee80211_device *ieee);
-extern void ieee80211_softmac_check_all_nets(struct ieee80211_device *ieee);
-extern void ieee80211_start_bss(struct ieee80211_device *ieee);
-extern void ieee80211_start_master_bss(struct ieee80211_device *ieee);
-extern void ieee80211_start_ibss(struct ieee80211_device *ieee);
-extern void ieee80211_softmac_init(struct ieee80211_device *ieee);
-extern void ieee80211_softmac_free(struct ieee80211_device *ieee);
-extern void ieee80211_associate_abort(struct ieee80211_device *ieee);
-extern void ieee80211_disassociate(struct ieee80211_device *ieee);
-extern void ieee80211_stop_scan(struct ieee80211_device *ieee);
-extern void ieee80211_start_scan_syncro(struct ieee80211_device *ieee);
-extern void ieee80211_check_all_nets(struct ieee80211_device *ieee);
-extern void ieee80211_start_protocol(struct ieee80211_device *ieee);
-extern void ieee80211_stop_protocol(struct ieee80211_device *ieee);
-extern void ieee80211_softmac_start_protocol(struct ieee80211_device *ieee);
-extern void ieee80211_softmac_stop_protocol(struct ieee80211_device *ieee);
-extern void ieee80211_reset_queue(struct ieee80211_device *ieee);
-extern void ieee80211_rtl_wake_queue(struct ieee80211_device *ieee);
-extern void ieee80211_rtl_stop_queue(struct ieee80211_device *ieee);
-extern struct sk_buff *ieee80211_get_beacon(struct ieee80211_device *ieee);
-extern void ieee80211_start_send_beacons(struct ieee80211_device *ieee);
-extern void ieee80211_stop_send_beacons(struct ieee80211_device *ieee);
-extern int ieee80211_wpa_supplicant_ioctl(struct ieee80211_device *ieee,
-					  struct iw_point *p);
-extern void notify_wx_assoc_event(struct ieee80211_device *ieee);
-extern void ieee80211_ps_tx_ack(struct ieee80211_device *ieee, short success);
-extern void SendDisassociation(struct ieee80211_device *ieee, u8 *asSta,
-			       u8 asRsn);
-extern void ieee80211_rtl_start_scan(struct ieee80211_device *ieee);
-
-//Add for RF power on power off by lizhaoming 080512
-extern void SendDisassociation(struct ieee80211_device *ieee, u8 *asSta,
-			       u8 asRsn);
-
-/* ieee80211_crypt_ccmp&tkip&wep.c */
-extern void ieee80211_tkip_null(void);
-extern void ieee80211_wep_null(void);
-extern void ieee80211_ccmp_null(void);
-/* ieee80211_softmac_wx.c */
-
-extern int ieee80211_wx_get_wap(struct ieee80211_device *ieee,
-				struct iw_request_info *info,
-				union iwreq_data *wrqu, char *ext);
-
-extern int ieee80211_wx_set_wap(struct ieee80211_device *ieee,
-				struct iw_request_info *info,
-				union iwreq_data *awrq,
-				char *extra);
-
-extern int ieee80211_wx_get_essid(struct ieee80211_device *ieee,
-				  struct iw_request_info *a,
-				  union iwreq_data *wrqu, char *b);
-
-extern int ieee80211_wx_set_rate(struct ieee80211_device *ieee,
-				 struct iw_request_info *info,
-				 union iwreq_data *wrqu, char *extra);
-
-extern int ieee80211_wx_get_rate(struct ieee80211_device *ieee,
-				 struct iw_request_info *info,
-				 union iwreq_data *wrqu, char *extra);
-
-extern int ieee80211_wx_set_mode(struct ieee80211_device *ieee,
-				 struct iw_request_info *a,
-				 union iwreq_data *wrqu, char *b);
-
-extern int ieee80211_wx_set_scan(struct ieee80211_device *ieee,
-				 struct iw_request_info *a,
-				 union iwreq_data *wrqu, char *b);
-
-extern int ieee80211_wx_set_essid(struct ieee80211_device *ieee,
-				  struct iw_request_info *a,
-				  union iwreq_data *wrqu, char *extra);
-
-extern int ieee80211_wx_get_mode(struct ieee80211_device *ieee,
-				 struct iw_request_info *a,
-				 union iwreq_data *wrqu, char *b);
-
-extern int ieee80211_wx_set_freq(struct ieee80211_device *ieee,
-				 struct iw_request_info *a,
-				 union iwreq_data *wrqu, char *b);
-
-extern int ieee80211_wx_get_freq(struct ieee80211_device *ieee,
-				 struct iw_request_info *a,
-				 union iwreq_data *wrqu, char *b);
-
-extern void ieee80211_wx_sync_scan_wq(struct work_struct *work);
-
-extern int ieee80211_wx_set_rawtx(struct ieee80211_device *ieee,
-				  struct iw_request_info *info,
-				  union iwreq_data *wrqu, char *extra);
-
-extern int ieee80211_wx_get_name(struct ieee80211_device *ieee,
-				 struct iw_request_info *info,
-				 union iwreq_data *wrqu, char *extra);
-
-extern int ieee80211_wx_set_power(struct ieee80211_device *ieee,
-				  struct iw_request_info *info,
-				  union iwreq_data *wrqu, char *extra);
-
-extern int ieee80211_wx_get_power(struct ieee80211_device *ieee,
-				  struct iw_request_info *info,
-				  union iwreq_data *wrqu, char *extra);
-
-extern void ieee80211_softmac_ips_scan_syncro(struct ieee80211_device *ieee);
-
-extern void ieee80211_sta_ps_send_null_frame(struct ieee80211_device *ieee,
-					     short pwr);
-
-extern const long ieee80211_wlan_frequencies[];
-
-extern inline void ieee80211_increment_scans(struct ieee80211_device *ieee)
-{
-	ieee->scans++;
-}
-
-extern inline int ieee80211_get_scans(struct ieee80211_device *ieee)
-{
-	return ieee->scans;
-}
-
-static inline const char *escape_essid(const char *essid, u8 essid_len) {
-	static char escaped[IW_ESSID_MAX_SIZE * 2 + 1];
-	const char *s = essid;
-	char *d = escaped;
-
-	if (ieee80211_is_empty_essid(essid, essid_len)) {
-		memcpy(escaped, "<hidden>", sizeof("<hidden>"));
-		return escaped;
-	}
-
-	essid_len = min(essid_len, (u8)IW_ESSID_MAX_SIZE);
-	while (essid_len--) {
-		if (*s == '\0') {
-			*d++ = '\\';
-			*d++ = '0';
-			s++;
-		} else {
-			*d++ = *s++;
-		}
-	}
-	*d = '\0';
-	return escaped;
-}
-#endif /* IEEE80211_H */
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.c
deleted file mode 100644
index 101f0c0cdb0a..000000000000
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.c
+++ /dev/null
@@ -1,240 +0,0 @@
-/*
- * Host AP crypto routines
- *
- * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
- * Portions Copyright (C) 2004, Intel Corporation <jketreno@linux.intel.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation. See README and COPYING for
- * more details.
- *
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-//#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-
-#include "ieee80211.h"
-
-MODULE_AUTHOR("Jouni Malinen");
-MODULE_DESCRIPTION("HostAP crypto");
-MODULE_LICENSE("GPL");
-
-struct ieee80211_crypto_alg {
-	struct list_head list;
-	struct ieee80211_crypto_ops *ops;
-};
-
-
-struct ieee80211_crypto {
-	struct list_head algs;
-	spinlock_t lock;
-};
-
-static struct ieee80211_crypto *hcrypt;
-
-void ieee80211_crypt_deinit_entries(struct ieee80211_device *ieee, int force)
-{
-	struct list_head *ptr, *n;
-	struct ieee80211_crypt_data *entry;
-
-	for (ptr = ieee->crypt_deinit_list.next, n = ptr->next;
-	     ptr != &ieee->crypt_deinit_list; ptr = n, n = ptr->next) {
-		entry = list_entry(ptr, struct ieee80211_crypt_data, list);
-
-		if (atomic_read(&entry->refcnt) != 0 && !force)
-			continue;
-
-		list_del(ptr);
-
-		if (entry->ops)
-			entry->ops->deinit(entry->priv);
-		kfree(entry);
-	}
-}
-
-void ieee80211_crypt_deinit_handler(unsigned long data)
-{
-	struct ieee80211_device *ieee = (struct ieee80211_device *)data;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ieee->lock, flags);
-	ieee80211_crypt_deinit_entries(ieee, 0);
-	if (!list_empty(&ieee->crypt_deinit_list)) {
-		pr_debug("entries remaining in delayed crypt deletion list\n");
-		ieee->crypt_deinit_timer.expires = jiffies + HZ;
-		add_timer(&ieee->crypt_deinit_timer);
-	}
-	spin_unlock_irqrestore(&ieee->lock, flags);
-
-}
-
-void ieee80211_crypt_delayed_deinit(struct ieee80211_device *ieee,
-				    struct ieee80211_crypt_data **crypt)
-{
-	struct ieee80211_crypt_data *tmp;
-	unsigned long flags;
-
-	if (*crypt == NULL)
-		return;
-
-	tmp = *crypt;
-	*crypt = NULL;
-
-	/* must not run ops->deinit() while there may be pending encrypt or
-	 * decrypt operations. Use a list of delayed deinits to avoid needing
-	 * locking. */
-
-	spin_lock_irqsave(&ieee->lock, flags);
-	list_add(&tmp->list, &ieee->crypt_deinit_list);
-	if (!timer_pending(&ieee->crypt_deinit_timer)) {
-		ieee->crypt_deinit_timer.expires = jiffies + HZ;
-		add_timer(&ieee->crypt_deinit_timer);
-	}
-	spin_unlock_irqrestore(&ieee->lock, flags);
-}
-
-int ieee80211_register_crypto_ops(struct ieee80211_crypto_ops *ops)
-{
-	unsigned long flags;
-	struct ieee80211_crypto_alg *alg;
-
-	if (hcrypt == NULL)
-		return -1;
-
-	alg = kzalloc(sizeof(*alg), GFP_KERNEL);
-	if (alg == NULL)
-		return -ENOMEM;
-
-	alg->ops = ops;
-
-	spin_lock_irqsave(&hcrypt->lock, flags);
-	list_add(&alg->list, &hcrypt->algs);
-	spin_unlock_irqrestore(&hcrypt->lock, flags);
-
-	pr_debug("registered algorithm '%s'\n", ops->name);
-
-	return 0;
-}
-
-int ieee80211_unregister_crypto_ops(struct ieee80211_crypto_ops *ops)
-{
-	unsigned long flags;
-	struct list_head *ptr;
-	struct ieee80211_crypto_alg *del_alg = NULL;
-
-	if (hcrypt == NULL)
-		return -1;
-
-	spin_lock_irqsave(&hcrypt->lock, flags);
-	for (ptr = hcrypt->algs.next; ptr != &hcrypt->algs; ptr = ptr->next) {
-		struct ieee80211_crypto_alg *alg =
-			(struct ieee80211_crypto_alg *) ptr;
-		if (alg->ops == ops) {
-			list_del(&alg->list);
-			del_alg = alg;
-			break;
-		}
-	}
-	spin_unlock_irqrestore(&hcrypt->lock, flags);
-
-	if (del_alg) {
-		pr_debug("unregistered algorithm '%s'\n", ops->name);
-		kfree(del_alg);
-	}
-
-	return del_alg ? 0 : -1;
-}
-
-
-struct ieee80211_crypto_ops *ieee80211_get_crypto_ops(const char *name)
-{
-	unsigned long flags;
-	struct list_head *ptr;
-	struct ieee80211_crypto_alg *found_alg = NULL;
-
-	if (hcrypt == NULL)
-		return NULL;
-
-	spin_lock_irqsave(&hcrypt->lock, flags);
-	for (ptr = hcrypt->algs.next; ptr != &hcrypt->algs; ptr = ptr->next) {
-		struct ieee80211_crypto_alg *alg =
-			(struct ieee80211_crypto_alg *) ptr;
-		if (strcmp(alg->ops->name, name) == 0) {
-			found_alg = alg;
-			break;
-		}
-	}
-	spin_unlock_irqrestore(&hcrypt->lock, flags);
-
-	if (found_alg)
-		return found_alg->ops;
-	else
-		return NULL;
-}
-
-
-static void *ieee80211_crypt_null_init(int keyidx) { return (void *) 1; }
-static void ieee80211_crypt_null_deinit(void *priv) {}
-
-static struct ieee80211_crypto_ops ieee80211_crypt_null = {
-	.name			= "NULL",
-	.init			= ieee80211_crypt_null_init,
-	.deinit			= ieee80211_crypt_null_deinit,
-	.encrypt_mpdu		= NULL,
-	.decrypt_mpdu		= NULL,
-	.encrypt_msdu		= NULL,
-	.decrypt_msdu		= NULL,
-	.set_key		= NULL,
-	.get_key		= NULL,
-	.extra_prefix_len	= 0,
-	.extra_postfix_len	= 0,
-	.owner			= THIS_MODULE,
-};
-
-
-int ieee80211_crypto_init(void)
-{
-	int ret = -ENOMEM;
-
-	hcrypt = kzalloc(sizeof(*hcrypt), GFP_KERNEL);
-	if (!hcrypt)
-		goto out;
-
-	INIT_LIST_HEAD(&hcrypt->algs);
-	spin_lock_init(&hcrypt->lock);
-
-	ret = ieee80211_register_crypto_ops(&ieee80211_crypt_null);
-	if (ret < 0) {
-		kfree(hcrypt);
-		hcrypt = NULL;
-	}
-out:
-	return ret;
-}
-
-
-void ieee80211_crypto_deinit(void)
-{
-	struct list_head *ptr, *n;
-	struct ieee80211_crypto_alg *alg = NULL;
-
-	if (hcrypt == NULL)
-		return;
-
-	list_for_each_safe(ptr, n, &hcrypt->algs) {
-		alg = list_entry(ptr, struct ieee80211_crypto_alg, list);
-		if (alg) {
-			list_del(ptr);
-			pr_debug("unregistered algorithm '%s' (deinit)\n",
-				 alg->ops->name);
-			kfree(alg);
-		}
-	}
-	kfree(hcrypt);
-}
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.h b/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.h
deleted file mode 100644
index 0b4ea431982d..000000000000
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * Original code based on Host AP (software wireless LAN access point) driver
- * for Intersil Prism2/2.5/3.
- *
- * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
- * <jkmaline@cc.hut.fi>
- * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
- *
- * Adaption to a generic IEEE 802.11 stack by James Ketrenos
- * <jketreno@linux.intel.com>
- *
- * Copyright (c) 2004, Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation. See README and COPYING for
- * more details.
- */
-
-/*
- * This file defines the interface to the ieee80211 crypto module.
- */
-#ifndef IEEE80211_CRYPT_H
-#define IEEE80211_CRYPT_H
-
-#include <linux/skbuff.h>
-
-struct ieee80211_crypto_ops {
-	const char *name;
-
-	/* init new crypto context (e.g., allocate private data space,
-	 * select IV, etc.); returns NULL on failure or pointer to allocated
-	 * private data on success */
-	void * (*init)(int keyidx);
-
-	/* deinitialize crypto context and free allocated private data */
-	void (*deinit)(void *priv);
-
-	/* encrypt/decrypt return < 0 on error or >= 0 on success. The return
-	 * value from decrypt_mpdu is passed as the keyidx value for
-	 * decrypt_msdu. skb must have enough head and tail room for the
-	 * encryption; if not, error will be returned; these functions are
-	 * called for all MPDUs (i.e., fragments).
-	 */
-	int (*encrypt_mpdu)(struct sk_buff *skb, int hdr_len, void *priv);
-	int (*decrypt_mpdu)(struct sk_buff *skb, int hdr_len, void *priv);
-
-	/* These functions are called for full MSDUs, i.e. full frames.
-	 * These can be NULL if full MSDU operations are not needed. */
-	int (*encrypt_msdu)(struct sk_buff *skb, int hdr_len, void *priv);
-	int (*decrypt_msdu)(struct sk_buff *skb, int keyidx, int hdr_len,
-			    void *priv);
-
-	int (*set_key)(void *key, int len, u8 *seq, void *priv);
-	int (*get_key)(void *key, int len, u8 *seq, void *priv);
-
-	/* procfs handler for printing out key information and possible
-	 * statistics */
-	char * (*print_stats)(char *p, void *priv);
-
-	/* maximum number of bytes added by encryption; encrypt buf is
-	 * allocated with extra_prefix_len bytes, copy of in_buf, and
-	 * extra_postfix_len; encrypt need not use all this space, but
-	 * the result must start at the beginning of the buffer and correct
-	 * length must be returned */
-	int extra_prefix_len, extra_postfix_len;
-
-	struct module *owner;
-};
-
-struct ieee80211_crypt_data {
-	struct list_head list; /* delayed deletion list */
-	struct ieee80211_crypto_ops *ops;
-	void *priv;
-	atomic_t refcnt;
-};
-
-int ieee80211_register_crypto_ops(struct ieee80211_crypto_ops *ops);
-int ieee80211_unregister_crypto_ops(struct ieee80211_crypto_ops *ops);
-struct ieee80211_crypto_ops *ieee80211_get_crypto_ops(const char *name);
-void ieee80211_crypt_deinit_entries(struct ieee80211_device *, int);
-void ieee80211_crypt_deinit_handler(unsigned long);
-void ieee80211_crypt_delayed_deinit(struct ieee80211_device *ieee,
-				    struct ieee80211_crypt_data **crypt);
-
-#endif
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_ccmp.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_ccmp.c
deleted file mode 100644
index 4fe253818630..000000000000
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_ccmp.c
+++ /dev/null
@@ -1,455 +0,0 @@
-/*
- * Host AP crypt: host-based CCMP encryption implementation for Host AP driver
- *
- * Copyright (c) 2003-2004, Jouni Malinen <jkmaline@cc.hut.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation. See README and COPYING for
- * more details.
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <linux/if_ether.h>
-#include <linux/if_arp.h>
-#include <linux/string.h>
-#include <linux/wireless.h>
-
-#include "ieee80211.h"
-
-#include <linux/crypto.h>
-#include <linux/scatterlist.h>
-
-MODULE_AUTHOR("Jouni Malinen");
-MODULE_DESCRIPTION("Host AP crypt: CCMP");
-MODULE_LICENSE("GPL");
-
-
-#define AES_BLOCK_LEN 16
-#define CCMP_HDR_LEN 8
-#define CCMP_MIC_LEN 8
-#define CCMP_TK_LEN 16
-#define CCMP_PN_LEN 6
-
-struct ieee80211_ccmp_data {
-	u8 key[CCMP_TK_LEN];
-	int key_set;
-
-	u8 tx_pn[CCMP_PN_LEN];
-	u8 rx_pn[CCMP_PN_LEN];
-
-	u32 dot11RSNAStatsCCMPFormatErrors;
-	u32 dot11RSNAStatsCCMPReplays;
-	u32 dot11RSNAStatsCCMPDecryptErrors;
-
-	int key_idx;
-
-	struct crypto_tfm *tfm;
-
-	/* scratch buffers for virt_to_page() (crypto API) */
-	u8 tx_b0[AES_BLOCK_LEN], tx_b[AES_BLOCK_LEN],
-		tx_e[AES_BLOCK_LEN], tx_s0[AES_BLOCK_LEN];
-	u8 rx_b0[AES_BLOCK_LEN], rx_b[AES_BLOCK_LEN], rx_a[AES_BLOCK_LEN];
-};
-
-static void ieee80211_ccmp_aes_encrypt(struct crypto_tfm *tfm,
-				const u8 pt[16], u8 ct[16])
-{
-	crypto_cipher_encrypt_one((void *)tfm, ct, pt);
-}
-
-static void *ieee80211_ccmp_init(int key_idx)
-{
-	struct ieee80211_ccmp_data *priv;
-
-	priv = kzalloc(sizeof(*priv), GFP_ATOMIC);
-	if (priv == NULL)
-		goto fail;
-	priv->key_idx = key_idx;
-
-	priv->tfm = (void *)crypto_alloc_cipher("aes", 0, CRYPTO_ALG_ASYNC);
-	if (IS_ERR(priv->tfm)) {
-		pr_debug("could not allocate crypto API aes\n");
-		priv->tfm = NULL;
-		goto fail;
-	}
-
-	return priv;
-
-fail:
-	if (priv) {
-		if (priv->tfm)
-			crypto_free_cipher((void *)priv->tfm);
-		kfree(priv);
-	}
-
-	return NULL;
-}
-
-
-static void ieee80211_ccmp_deinit(void *priv)
-{
-	struct ieee80211_ccmp_data *_priv = priv;
-
-	if (_priv && _priv->tfm)
-		crypto_free_cipher((void *)_priv->tfm);
-	kfree(priv);
-}
-
-
-static inline void xor_block(u8 *b, u8 *a, size_t len)
-{
-	int i;
-	for (i = 0; i < len; i++)
-		b[i] ^= a[i];
-}
-
-static void ccmp_init_blocks(struct crypto_tfm *tfm,
-			     struct ieee80211_hdr_4addr *hdr,
-			     u8 *pn, size_t dlen, u8 *b0, u8 *auth,
-			     u8 *s0)
-{
-	u8 *pos, qc = 0;
-	size_t aad_len;
-	u16 fc;
-	int a4_included, qc_included;
-	u8 aad[2 * AES_BLOCK_LEN];
-
-	fc = le16_to_cpu(hdr->frame_ctl);
-	a4_included = ((fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) ==
-		       (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS));
-	/*
-	qc_included = ((WLAN_FC_GET_TYPE(fc) == IEEE80211_FTYPE_DATA) &&
-		       (WLAN_FC_GET_STYPE(fc) & 0x08));
-	*/
-	qc_included = ((WLAN_FC_GET_TYPE(fc) == IEEE80211_FTYPE_DATA) &&
-		       (WLAN_FC_GET_STYPE(fc) & 0x80));
-	aad_len = 22;
-	if (a4_included)
-		aad_len += 6;
-	if (qc_included) {
-		pos = (u8 *) &hdr->addr4;
-		if (a4_included)
-			pos += 6;
-		qc = *pos & 0x0f;
-		aad_len += 2;
-	}
-	/* CCM Initial Block:
-	 * Flag (Include authentication header, M=3 (8-octet MIC),
-	 *       L=1 (2-octet Dlen))
-	 * Nonce: 0x00 | A2 | PN
-	 * Dlen */
-	b0[0] = 0x59;
-	b0[1] = qc;
-	memcpy(b0 + 2, hdr->addr2, ETH_ALEN);
-	memcpy(b0 + 8, pn, CCMP_PN_LEN);
-	b0[14] = (dlen >> 8) & 0xff;
-	b0[15] = dlen & 0xff;
-
-	/* AAD:
-	 * FC with bits 4..6 and 11..13 masked to zero; 14 is always one
-	 * A1 | A2 | A3
-	 * SC with bits 4..15 (seq#) masked to zero
-	 * A4 (if present)
-	 * QC (if present)
-	 */
-	pos = (u8 *) hdr;
-	aad[0] = 0; /* aad_len >> 8 */
-	aad[1] = aad_len & 0xff;
-	aad[2] = pos[0] & 0x8f;
-	aad[3] = pos[1] & 0xc7;
-	memcpy(aad + 4, hdr->addr1, 3 * ETH_ALEN);
-	pos = (u8 *) &hdr->seq_ctl;
-	aad[22] = pos[0] & 0x0f;
-	aad[23] = 0; /* all bits masked */
-	memset(aad + 24, 0, 8);
-	if (a4_included)
-		memcpy(aad + 24, hdr->addr4, ETH_ALEN);
-	if (qc_included) {
-		aad[a4_included ? 30 : 24] = qc;
-		/* rest of QC masked */
-	}
-
-	/* Start with the first block and AAD */
-	ieee80211_ccmp_aes_encrypt(tfm, b0, auth);
-	xor_block(auth, aad, AES_BLOCK_LEN);
-	ieee80211_ccmp_aes_encrypt(tfm, auth, auth);
-	xor_block(auth, &aad[AES_BLOCK_LEN], AES_BLOCK_LEN);
-	ieee80211_ccmp_aes_encrypt(tfm, auth, auth);
-	b0[0] &= 0x07;
-	b0[14] = b0[15] = 0;
-	ieee80211_ccmp_aes_encrypt(tfm, b0, s0);
-}
-
-static int ieee80211_ccmp_encrypt(struct sk_buff *skb, int hdr_len, void *priv)
-{
-	struct ieee80211_ccmp_data *key = priv;
-	int data_len, i;
-	u8 *pos;
-	struct ieee80211_hdr_4addr *hdr;
-	int blocks, last, len;
-	u8 *mic;
-	u8 *b0 = key->tx_b0;
-	u8 *b = key->tx_b;
-	u8 *e = key->tx_e;
-	u8 *s0 = key->tx_s0;
-
-	if (skb_headroom(skb) < CCMP_HDR_LEN ||
-	    skb_tailroom(skb) < CCMP_MIC_LEN ||
-	    skb->len < hdr_len)
-		return -1;
-
-	data_len = skb->len - hdr_len;
-	pos = skb_push(skb, CCMP_HDR_LEN);
-	memmove(pos, pos + CCMP_HDR_LEN, hdr_len);
-	pos += hdr_len;
-
-	i = CCMP_PN_LEN - 1;
-	while (i >= 0) {
-		key->tx_pn[i]++;
-		if (key->tx_pn[i] != 0)
-			break;
-		i--;
-	}
-
-	*pos++ = key->tx_pn[5];
-	*pos++ = key->tx_pn[4];
-	*pos++ = 0;
-	*pos++ = (key->key_idx << 6) | (1 << 5) /* Ext IV included */;
-	*pos++ = key->tx_pn[3];
-	*pos++ = key->tx_pn[2];
-	*pos++ = key->tx_pn[1];
-	*pos++ = key->tx_pn[0];
-
-	hdr = (struct ieee80211_hdr_4addr *)skb->data;
-	mic = skb_put(skb, CCMP_MIC_LEN);
-
-	ccmp_init_blocks(key->tfm, hdr, key->tx_pn, data_len, b0, b, s0);
-
-	blocks = (data_len + AES_BLOCK_LEN - 1) / AES_BLOCK_LEN;
-	last = data_len % AES_BLOCK_LEN;
-
-	for (i = 1; i <= blocks; i++) {
-		len = (i == blocks && last) ? last : AES_BLOCK_LEN;
-		/* Authentication */
-		xor_block(b, pos, len);
-		ieee80211_ccmp_aes_encrypt(key->tfm, b, b);
-		/* Encryption, with counter */
-		b0[14] = (i >> 8) & 0xff;
-		b0[15] = i & 0xff;
-		ieee80211_ccmp_aes_encrypt(key->tfm, b0, e);
-		xor_block(pos, e, len);
-		pos += len;
-	}
-
-	for (i = 0; i < CCMP_MIC_LEN; i++)
-		mic[i] = b[i] ^ s0[i];
-
-	return 0;
-}
-
-
-static int ieee80211_ccmp_decrypt(struct sk_buff *skb, int hdr_len, void *priv)
-{
-	struct ieee80211_ccmp_data *key = priv;
-	u8 keyidx, *pos;
-	struct ieee80211_hdr_4addr *hdr;
-	u8 pn[6];
-	size_t data_len = skb->len - hdr_len - CCMP_HDR_LEN - CCMP_MIC_LEN;
-	u8 *mic = skb->data + skb->len - CCMP_MIC_LEN;
-	u8 *b0 = key->rx_b0;
-	u8 *b = key->rx_b;
-	u8 *a = key->rx_a;
-	int i, blocks, last, len;
-
-	if (skb->len < hdr_len + CCMP_HDR_LEN + CCMP_MIC_LEN) {
-		key->dot11RSNAStatsCCMPFormatErrors++;
-		return -1;
-	}
-
-	hdr = (struct ieee80211_hdr_4addr *)skb->data;
-	pos = skb->data + hdr_len;
-	keyidx = pos[3];
-	if (!(keyidx & (1 << 5))) {
-		if (net_ratelimit()) {
-			pr_debug("received packet without ExtIV flag from %pM\n",
-				 hdr->addr2);
-		}
-		key->dot11RSNAStatsCCMPFormatErrors++;
-		return -2;
-	}
-	keyidx >>= 6;
-	if (key->key_idx != keyidx) {
-		pr_debug("RX tkey->key_idx=%d frame keyidx=%d priv=%p\n",
-			 key->key_idx, keyidx, priv);
-		return -6;
-	}
-	if (!key->key_set) {
-		if (net_ratelimit()) {
-			pr_debug("received packet from %pM with keyid=%d that does not have a configured key\n",
-				 hdr->addr2, keyidx);
-		}
-		return -3;
-	}
-
-	pn[0] = pos[7];
-	pn[1] = pos[6];
-	pn[2] = pos[5];
-	pn[3] = pos[4];
-	pn[4] = pos[1];
-	pn[5] = pos[0];
-	pos += 8;
-
-	if (memcmp(pn, key->rx_pn, CCMP_PN_LEN) <= 0) {
-		if (net_ratelimit()) {
-			pr_debug("replay detected: STA=%pM previous PN %pm received PN %pm\n",
-				 hdr->addr2, key->rx_pn, pn);
-		}
-		key->dot11RSNAStatsCCMPReplays++;
-		return -4;
-	}
-
-	ccmp_init_blocks(key->tfm, hdr, pn, data_len, b0, a, b);
-	xor_block(mic, b, CCMP_MIC_LEN);
-
-	blocks = (data_len + AES_BLOCK_LEN - 1) / AES_BLOCK_LEN;
-	last = data_len % AES_BLOCK_LEN;
-
-	for (i = 1; i <= blocks; i++) {
-		len = (i == blocks && last) ? last : AES_BLOCK_LEN;
-		/* Decrypt, with counter */
-		b0[14] = (i >> 8) & 0xff;
-		b0[15] = i & 0xff;
-		ieee80211_ccmp_aes_encrypt(key->tfm, b0, b);
-		xor_block(pos, b, len);
-		/* Authentication */
-		xor_block(a, pos, len);
-		ieee80211_ccmp_aes_encrypt(key->tfm, a, a);
-		pos += len;
-	}
-
-	if (memcmp(mic, a, CCMP_MIC_LEN) != 0) {
-		if (net_ratelimit())
-			pr_debug("decrypt failed: STA=%pM\n", hdr->addr2);
-
-		key->dot11RSNAStatsCCMPDecryptErrors++;
-		return -5;
-	}
-
-	memcpy(key->rx_pn, pn, CCMP_PN_LEN);
-
-	/* Remove hdr and MIC */
-	memmove(skb->data + CCMP_HDR_LEN, skb->data, hdr_len);
-	skb_pull(skb, CCMP_HDR_LEN);
-	skb_trim(skb, skb->len - CCMP_MIC_LEN);
-
-	return keyidx;
-}
-
-
-static int ieee80211_ccmp_set_key(void *key, int len, u8 *seq, void *priv)
-{
-	struct ieee80211_ccmp_data *data = priv;
-	int keyidx;
-	struct crypto_tfm *tfm = data->tfm;
-
-	keyidx = data->key_idx;
-	memset(data, 0, sizeof(*data));
-	data->key_idx = keyidx;
-	data->tfm = tfm;
-	if (len == CCMP_TK_LEN) {
-		memcpy(data->key, key, CCMP_TK_LEN);
-		data->key_set = 1;
-		if (seq) {
-			data->rx_pn[0] = seq[5];
-			data->rx_pn[1] = seq[4];
-			data->rx_pn[2] = seq[3];
-			data->rx_pn[3] = seq[2];
-			data->rx_pn[4] = seq[1];
-			data->rx_pn[5] = seq[0];
-		}
-		crypto_cipher_setkey((void *)data->tfm, data->key, CCMP_TK_LEN);
-	} else if (len == 0)
-		data->key_set = 0;
-	else
-		return -1;
-
-	return 0;
-}
-
-
-static int ieee80211_ccmp_get_key(void *key, int len, u8 *seq, void *priv)
-{
-	struct ieee80211_ccmp_data *data = priv;
-
-	if (len < CCMP_TK_LEN)
-		return -1;
-
-	if (!data->key_set)
-		return 0;
-	memcpy(key, data->key, CCMP_TK_LEN);
-
-	if (seq) {
-		seq[0] = data->tx_pn[5];
-		seq[1] = data->tx_pn[4];
-		seq[2] = data->tx_pn[3];
-		seq[3] = data->tx_pn[2];
-		seq[4] = data->tx_pn[1];
-		seq[5] = data->tx_pn[0];
-	}
-
-	return CCMP_TK_LEN;
-}
-
-
-static char *ieee80211_ccmp_print_stats(char *p, void *priv)
-{
-	struct ieee80211_ccmp_data *ccmp = priv;
-	p += sprintf(p,
-		     "key[%d] alg=CCMP key_set=%d tx_pn=%pm rx_pn=%pm format_errors=%d replays=%d decrypt_errors=%d\n",
-		     ccmp->key_idx, ccmp->key_set,
-		     ccmp->tx_pn, ccmp->rx_pn,
-		     ccmp->dot11RSNAStatsCCMPFormatErrors,
-		     ccmp->dot11RSNAStatsCCMPReplays,
-		     ccmp->dot11RSNAStatsCCMPDecryptErrors);
-
-	return p;
-}
-
-void ieee80211_ccmp_null(void)
-{
-	return;
-}
-static struct ieee80211_crypto_ops ieee80211_crypt_ccmp = {
-	.name			= "CCMP",
-	.init			= ieee80211_ccmp_init,
-	.deinit			= ieee80211_ccmp_deinit,
-	.encrypt_mpdu		= ieee80211_ccmp_encrypt,
-	.decrypt_mpdu		= ieee80211_ccmp_decrypt,
-	.encrypt_msdu		= NULL,
-	.decrypt_msdu		= NULL,
-	.set_key		= ieee80211_ccmp_set_key,
-	.get_key		= ieee80211_ccmp_get_key,
-	.print_stats		= ieee80211_ccmp_print_stats,
-	.extra_prefix_len	= CCMP_HDR_LEN,
-	.extra_postfix_len	= CCMP_MIC_LEN,
-	.owner			= THIS_MODULE,
-};
-
-
-int ieee80211_crypto_ccmp_init(void)
-{
-	return ieee80211_register_crypto_ops(&ieee80211_crypt_ccmp);
-}
-
-
-void ieee80211_crypto_ccmp_exit(void)
-{
-	ieee80211_unregister_crypto_ops(&ieee80211_crypt_ccmp);
-}
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_tkip.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_tkip.c
deleted file mode 100644
index 6c1acc5dfba7..000000000000
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_tkip.c
+++ /dev/null
@@ -1,740 +0,0 @@
-/*
- * Host AP crypt: host-based TKIP encryption implementation for Host AP driver
- *
- * Copyright (c) 2003-2004, Jouni Malinen <jkmaline@cc.hut.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation. See README and COPYING for
- * more details.
- */
-
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <linux/if_ether.h>
-#include <linux/if_arp.h>
-#include <asm/string.h>
-
-#include "ieee80211.h"
-
-#include <linux/crypto.h>
-#include <linux/scatterlist.h>
-#include <linux/crc32.h>
-
-MODULE_AUTHOR("Jouni Malinen");
-MODULE_DESCRIPTION("Host AP crypt: TKIP");
-MODULE_LICENSE("GPL");
-
-
-struct ieee80211_tkip_data {
-#define TKIP_KEY_LEN 32
-	u8 key[TKIP_KEY_LEN];
-	int key_set;
-
-	u32 tx_iv32;
-	u16 tx_iv16;
-	u16 tx_ttak[5];
-	int tx_phase1_done;
-
-	u32 rx_iv32;
-	u16 rx_iv16;
-	u16 rx_ttak[5];
-	int rx_phase1_done;
-	u32 rx_iv32_new;
-	u16 rx_iv16_new;
-
-	u32 dot11RSNAStatsTKIPReplays;
-	u32 dot11RSNAStatsTKIPICVErrors;
-	u32 dot11RSNAStatsTKIPLocalMICFailures;
-
-	int key_idx;
-
-	struct crypto_blkcipher *rx_tfm_arc4;
-	struct crypto_hash *rx_tfm_michael;
-	struct crypto_blkcipher *tx_tfm_arc4;
-	struct crypto_hash *tx_tfm_michael;
-	struct crypto_tfm *tfm_arc4;
-	struct crypto_tfm *tfm_michael;
-
-	/* scratch buffers for virt_to_page() (crypto API) */
-	u8 rx_hdr[16], tx_hdr[16];
-};
-
-static void *ieee80211_tkip_init(int key_idx)
-{
-	struct ieee80211_tkip_data *priv;
-
-	priv = kzalloc(sizeof(*priv), GFP_ATOMIC);
-	if (priv == NULL)
-		goto fail;
-	priv->key_idx = key_idx;
-
-	priv->tx_tfm_arc4 = crypto_alloc_blkcipher("ecb(arc4)", 0,
-						CRYPTO_ALG_ASYNC);
-	if (IS_ERR(priv->tx_tfm_arc4)) {
-		printk(KERN_DEBUG "ieee80211_crypt_tkip: could not allocate "
-		       "crypto API arc4\n");
-		priv->tx_tfm_arc4 = NULL;
-		goto fail;
-	}
-
-	priv->tx_tfm_michael = crypto_alloc_hash("michael_mic", 0,
-						 CRYPTO_ALG_ASYNC);
-	if (IS_ERR(priv->tx_tfm_michael)) {
-		printk(KERN_DEBUG "ieee80211_crypt_tkip: could not allocate "
-		       "crypto API michael_mic\n");
-		priv->tx_tfm_michael = NULL;
-		goto fail;
-	}
-
-	priv->rx_tfm_arc4 = crypto_alloc_blkcipher("ecb(arc4)", 0,
-						CRYPTO_ALG_ASYNC);
-	if (IS_ERR(priv->rx_tfm_arc4)) {
-		printk(KERN_DEBUG "ieee80211_crypt_tkip: could not allocate "
-		       "crypto API arc4\n");
-		priv->rx_tfm_arc4 = NULL;
-		goto fail;
-	}
-
-	priv->rx_tfm_michael = crypto_alloc_hash("michael_mic", 0,
-						 CRYPTO_ALG_ASYNC);
-	if (IS_ERR(priv->rx_tfm_michael)) {
-		printk(KERN_DEBUG "ieee80211_crypt_tkip: could not allocate "
-		       "crypto API michael_mic\n");
-		priv->rx_tfm_michael = NULL;
-		goto fail;
-	}
-
-	return priv;
-
-fail:
-	if (priv) {
-		if (priv->tx_tfm_michael)
-			crypto_free_hash(priv->tx_tfm_michael);
-		if (priv->tx_tfm_arc4)
-			crypto_free_blkcipher(priv->tx_tfm_arc4);
-		if (priv->rx_tfm_michael)
-			crypto_free_hash(priv->rx_tfm_michael);
-		if (priv->rx_tfm_arc4)
-			crypto_free_blkcipher(priv->rx_tfm_arc4);
-		kfree(priv);
-	}
-
-	return NULL;
-}
-
-
-static void ieee80211_tkip_deinit(void *priv)
-{
-	struct ieee80211_tkip_data *_priv = priv;
-
-	if (_priv) {
-		if (_priv->tx_tfm_michael)
-			crypto_free_hash(_priv->tx_tfm_michael);
-		if (_priv->tx_tfm_arc4)
-			crypto_free_blkcipher(_priv->tx_tfm_arc4);
-		if (_priv->rx_tfm_michael)
-			crypto_free_hash(_priv->rx_tfm_michael);
-		if (_priv->rx_tfm_arc4)
-			crypto_free_blkcipher(_priv->rx_tfm_arc4);
-	}
-	kfree(priv);
-}
-
-
-static inline u16 RotR1(u16 val)
-{
-	return (val >> 1) | (val << 15);
-}
-
-
-static inline u8 Lo8(u16 val)
-{
-	return val & 0xff;
-}
-
-
-static inline u8 Hi8(u16 val)
-{
-	return val >> 8;
-}
-
-
-static inline u16 Lo16(u32 val)
-{
-	return val & 0xffff;
-}
-
-
-static inline u16 Hi16(u32 val)
-{
-	return val >> 16;
-}
-
-
-static inline u16 Mk16(u8 hi, u8 lo)
-{
-	return lo | (((u16) hi) << 8);
-}
-
-
-static inline u16 Mk16_le(u16 *v)
-{
-	return le16_to_cpu(*v);
-}
-
-
-static const u16 Sbox[256] = {
-	0xC6A5, 0xF884, 0xEE99, 0xF68D, 0xFF0D, 0xD6BD, 0xDEB1, 0x9154,
-	0x6050, 0x0203, 0xCEA9, 0x567D, 0xE719, 0xB562, 0x4DE6, 0xEC9A,
-	0x8F45, 0x1F9D, 0x8940, 0xFA87, 0xEF15, 0xB2EB, 0x8EC9, 0xFB0B,
-	0x41EC, 0xB367, 0x5FFD, 0x45EA, 0x23BF, 0x53F7, 0xE496, 0x9B5B,
-	0x75C2, 0xE11C, 0x3DAE, 0x4C6A, 0x6C5A, 0x7E41, 0xF502, 0x834F,
-	0x685C, 0x51F4, 0xD134, 0xF908, 0xE293, 0xAB73, 0x6253, 0x2A3F,
-	0x080C, 0x9552, 0x4665, 0x9D5E, 0x3028, 0x37A1, 0x0A0F, 0x2FB5,
-	0x0E09, 0x2436, 0x1B9B, 0xDF3D, 0xCD26, 0x4E69, 0x7FCD, 0xEA9F,
-	0x121B, 0x1D9E, 0x5874, 0x342E, 0x362D, 0xDCB2, 0xB4EE, 0x5BFB,
-	0xA4F6, 0x764D, 0xB761, 0x7DCE, 0x527B, 0xDD3E, 0x5E71, 0x1397,
-	0xA6F5, 0xB968, 0x0000, 0xC12C, 0x4060, 0xE31F, 0x79C8, 0xB6ED,
-	0xD4BE, 0x8D46, 0x67D9, 0x724B, 0x94DE, 0x98D4, 0xB0E8, 0x854A,
-	0xBB6B, 0xC52A, 0x4FE5, 0xED16, 0x86C5, 0x9AD7, 0x6655, 0x1194,
-	0x8ACF, 0xE910, 0x0406, 0xFE81, 0xA0F0, 0x7844, 0x25BA, 0x4BE3,
-	0xA2F3, 0x5DFE, 0x80C0, 0x058A, 0x3FAD, 0x21BC, 0x7048, 0xF104,
-	0x63DF, 0x77C1, 0xAF75, 0x4263, 0x2030, 0xE51A, 0xFD0E, 0xBF6D,
-	0x814C, 0x1814, 0x2635, 0xC32F, 0xBEE1, 0x35A2, 0x88CC, 0x2E39,
-	0x9357, 0x55F2, 0xFC82, 0x7A47, 0xC8AC, 0xBAE7, 0x322B, 0xE695,
-	0xC0A0, 0x1998, 0x9ED1, 0xA37F, 0x4466, 0x547E, 0x3BAB, 0x0B83,
-	0x8CCA, 0xC729, 0x6BD3, 0x283C, 0xA779, 0xBCE2, 0x161D, 0xAD76,
-	0xDB3B, 0x6456, 0x744E, 0x141E, 0x92DB, 0x0C0A, 0x486C, 0xB8E4,
-	0x9F5D, 0xBD6E, 0x43EF, 0xC4A6, 0x39A8, 0x31A4, 0xD337, 0xF28B,
-	0xD532, 0x8B43, 0x6E59, 0xDAB7, 0x018C, 0xB164, 0x9CD2, 0x49E0,
-	0xD8B4, 0xACFA, 0xF307, 0xCF25, 0xCAAF, 0xF48E, 0x47E9, 0x1018,
-	0x6FD5, 0xF088, 0x4A6F, 0x5C72, 0x3824, 0x57F1, 0x73C7, 0x9751,
-	0xCB23, 0xA17C, 0xE89C, 0x3E21, 0x96DD, 0x61DC, 0x0D86, 0x0F85,
-	0xE090, 0x7C42, 0x71C4, 0xCCAA, 0x90D8, 0x0605, 0xF701, 0x1C12,
-	0xC2A3, 0x6A5F, 0xAEF9, 0x69D0, 0x1791, 0x9958, 0x3A27, 0x27B9,
-	0xD938, 0xEB13, 0x2BB3, 0x2233, 0xD2BB, 0xA970, 0x0789, 0x33A7,
-	0x2DB6, 0x3C22, 0x1592, 0xC920, 0x8749, 0xAAFF, 0x5078, 0xA57A,
-	0x038F, 0x59F8, 0x0980, 0x1A17, 0x65DA, 0xD731, 0x84C6, 0xD0B8,
-	0x82C3, 0x29B0, 0x5A77, 0x1E11, 0x7BCB, 0xA8FC, 0x6DD6, 0x2C3A,
-};
-
-
-static inline u16 _S_(u16 v)
-{
-	u16 t = Sbox[Hi8(v)];
-	return Sbox[Lo8(v)] ^ ((t << 8) | (t >> 8));
-}
-
-#define PHASE1_LOOP_COUNT 8
-
-static void tkip_mixing_phase1(u16 *TTAK, const u8 *TK, const u8 *TA, u32 IV32)
-{
-	int i, j;
-
-	/* Initialize the 80-bit TTAK from TSC (IV32) and TA[0..5] */
-	TTAK[0] = Lo16(IV32);
-	TTAK[1] = Hi16(IV32);
-	TTAK[2] = Mk16(TA[1], TA[0]);
-	TTAK[3] = Mk16(TA[3], TA[2]);
-	TTAK[4] = Mk16(TA[5], TA[4]);
-
-	for (i = 0; i < PHASE1_LOOP_COUNT; i++) {
-		j = 2 * (i & 1);
-		TTAK[0] += _S_(TTAK[4] ^ Mk16(TK[1 + j], TK[0 + j]));
-		TTAK[1] += _S_(TTAK[0] ^ Mk16(TK[5 + j], TK[4 + j]));
-		TTAK[2] += _S_(TTAK[1] ^ Mk16(TK[9 + j], TK[8 + j]));
-		TTAK[3] += _S_(TTAK[2] ^ Mk16(TK[13 + j], TK[12 + j]));
-		TTAK[4] += _S_(TTAK[3] ^ Mk16(TK[1 + j], TK[0 + j])) + i;
-	}
-}
-
-
-static void tkip_mixing_phase2(u8 *WEPSeed, const u8 *TK, const u16 *TTAK,
-			       u16 IV16)
-{
-	/* Make temporary area overlap WEP seed so that the final copy can be
-	 * avoided on little endian hosts. */
-	u16 *PPK = (u16 *) &WEPSeed[4];
-
-	/* Step 1 - make copy of TTAK and bring in TSC */
-	PPK[0] = TTAK[0];
-	PPK[1] = TTAK[1];
-	PPK[2] = TTAK[2];
-	PPK[3] = TTAK[3];
-	PPK[4] = TTAK[4];
-	PPK[5] = TTAK[4] + IV16;
-
-	/* Step 2 - 96-bit bijective mixing using S-box */
-	PPK[0] += _S_(PPK[5] ^ Mk16_le((u16 *) &TK[0]));
-	PPK[1] += _S_(PPK[0] ^ Mk16_le((u16 *) &TK[2]));
-	PPK[2] += _S_(PPK[1] ^ Mk16_le((u16 *) &TK[4]));
-	PPK[3] += _S_(PPK[2] ^ Mk16_le((u16 *) &TK[6]));
-	PPK[4] += _S_(PPK[3] ^ Mk16_le((u16 *) &TK[8]));
-	PPK[5] += _S_(PPK[4] ^ Mk16_le((u16 *) &TK[10]));
-
-	PPK[0] += RotR1(PPK[5] ^ Mk16_le((u16 *) &TK[12]));
-	PPK[1] += RotR1(PPK[0] ^ Mk16_le((u16 *) &TK[14]));
-	PPK[2] += RotR1(PPK[1]);
-	PPK[3] += RotR1(PPK[2]);
-	PPK[4] += RotR1(PPK[3]);
-	PPK[5] += RotR1(PPK[4]);
-
-	/* Step 3 - bring in last of TK bits, assign 24-bit WEP IV value
-	 * WEPSeed[0..2] is transmitted as WEP IV */
-	WEPSeed[0] = Hi8(IV16);
-	WEPSeed[1] = (Hi8(IV16) | 0x20) & 0x7F;
-	WEPSeed[2] = Lo8(IV16);
-	WEPSeed[3] = Lo8((PPK[5] ^ Mk16_le((u16 *) &TK[0])) >> 1);
-
-#ifdef __BIG_ENDIAN
-	{
-		int i;
-		for (i = 0; i < 6; i++)
-			PPK[i] = (PPK[i] << 8) | (PPK[i] >> 8);
-	}
-#endif
-}
-
-static int ieee80211_tkip_encrypt(struct sk_buff *skb, int hdr_len, void *priv)
-{
-	struct ieee80211_tkip_data *tkey = priv;
-	struct blkcipher_desc desc = {.tfm = tkey->tx_tfm_arc4};
-	int len;
-	u8  *pos;
-	struct ieee80211_hdr_4addr *hdr;
-	u8 rc4key[16], *icv;
-	u32 crc;
-	struct scatterlist sg;
-	int ret;
-
-	ret = 0;
-	if (skb_headroom(skb) < 8 || skb_tailroom(skb) < 4 ||
-	    skb->len < hdr_len)
-		return -1;
-
-	hdr = (struct ieee80211_hdr_4addr *)skb->data;
-
-	if (!tkey->tx_phase1_done) {
-		tkip_mixing_phase1(tkey->tx_ttak, tkey->key, hdr->addr2,
-				   tkey->tx_iv32);
-		tkey->tx_phase1_done = 1;
-	}
-	tkip_mixing_phase2(rc4key, tkey->key, tkey->tx_ttak, tkey->tx_iv16);
-
-	len = skb->len - hdr_len;
-	pos = skb_push(skb, 8);
-	memmove(pos, pos + 8, hdr_len);
-	pos += hdr_len;
-
-	*pos++ = rc4key[0];
-	*pos++ = rc4key[1];
-	*pos++ = rc4key[2];
-	*pos++ = (tkey->key_idx << 6) | (1 << 5) /* Ext IV included */;
-	*pos++ = tkey->tx_iv32 & 0xff;
-	*pos++ = (tkey->tx_iv32 >> 8) & 0xff;
-	*pos++ = (tkey->tx_iv32 >> 16) & 0xff;
-	*pos++ = (tkey->tx_iv32 >> 24) & 0xff;
-
-	icv = skb_put(skb, 4);
-	crc = ~crc32_le(~0, pos, len);
-	icv[0] = crc;
-	icv[1] = crc >> 8;
-	icv[2] = crc >> 16;
-	icv[3] = crc >> 24;
-	crypto_blkcipher_setkey(tkey->tx_tfm_arc4, rc4key, 16);
-	sg_init_one(&sg, pos, len + 4);
-	ret = crypto_blkcipher_encrypt(&desc, &sg, &sg, len + 4);
-
-	tkey->tx_iv16++;
-	if (tkey->tx_iv16 == 0) {
-		tkey->tx_phase1_done = 0;
-		tkey->tx_iv32++;
-	}
-	   return ret;
-}
-
-static int ieee80211_tkip_decrypt(struct sk_buff *skb, int hdr_len, void *priv)
-{
-	struct ieee80211_tkip_data *tkey = priv;
-	struct blkcipher_desc desc = { .tfm = tkey->rx_tfm_arc4 };
-	u8 keyidx, *pos;
-	u32 iv32;
-	u16 iv16;
-	struct ieee80211_hdr_4addr *hdr;
-	u8 icv[4];
-	u32 crc;
-	struct scatterlist sg;
-	u8 rc4key[16];
-	int plen;
-
-	if (skb->len < hdr_len + 8 + 4)
-		return -1;
-
-	hdr = (struct ieee80211_hdr_4addr *)skb->data;
-	pos = skb->data + hdr_len;
-	keyidx = pos[3];
-	if (!(keyidx & (1 << 5))) {
-		if (net_ratelimit()) {
-			printk(KERN_DEBUG "TKIP: received packet without ExtIV"
-			       " flag from %pM\n", hdr->addr2);
-		}
-		return -2;
-	}
-	keyidx >>= 6;
-	if (tkey->key_idx != keyidx) {
-		printk(KERN_DEBUG "TKIP: RX tkey->key_idx=%d frame "
-		       "keyidx=%d priv=%p\n", tkey->key_idx, keyidx, priv);
-		return -6;
-	}
-	if (!tkey->key_set) {
-		if (net_ratelimit()) {
-			printk(KERN_DEBUG "TKIP: received packet from %pM"
-			       " with keyid=%d that does not have a configured"
-			       " key\n", hdr->addr2, keyidx);
-		}
-		return -3;
-	}
-	iv16 = (pos[0] << 8) | pos[2];
-	iv32 = pos[4] | (pos[5] << 8) | (pos[6] << 16) | (pos[7] << 24);
-	pos += 8;
-
-	if (iv32 < tkey->rx_iv32 ||
-	    (iv32 == tkey->rx_iv32 && iv16 <= tkey->rx_iv16)) {
-		if (net_ratelimit()) {
-			printk(KERN_DEBUG "TKIP: replay detected: STA=%pM"
-			       " previous TSC %08x%04x received TSC "
-			       "%08x%04x\n", hdr->addr2,
-			       tkey->rx_iv32, tkey->rx_iv16, iv32, iv16);
-		}
-		tkey->dot11RSNAStatsTKIPReplays++;
-		return -4;
-	}
-
-	if (iv32 != tkey->rx_iv32 || !tkey->rx_phase1_done) {
-		tkip_mixing_phase1(tkey->rx_ttak, tkey->key, hdr->addr2, iv32);
-		tkey->rx_phase1_done = 1;
-	}
-	tkip_mixing_phase2(rc4key, tkey->key, tkey->rx_ttak, iv16);
-
-	plen = skb->len - hdr_len - 12;
-	crypto_blkcipher_setkey(tkey->rx_tfm_arc4, rc4key, 16);
-	sg_init_one(&sg, pos, plen + 4);
-	if (crypto_blkcipher_decrypt(&desc, &sg, &sg, plen + 4)) {
-		if (net_ratelimit()) {
-			printk(KERN_DEBUG ": TKIP: failed to decrypt "
-			       "received packet from %pM\n",
-			       hdr->addr2);
-		}
-		return -7;
-	}
-
-	crc = ~crc32_le(~0, pos, plen);
-	icv[0] = crc;
-	icv[1] = crc >> 8;
-	icv[2] = crc >> 16;
-	icv[3] = crc >> 24;
-	if (memcmp(icv, pos + plen, 4) != 0) {
-		if (iv32 != tkey->rx_iv32) {
-			/* Previously cached Phase1 result was already lost, so
-			 * it needs to be recalculated for the next packet. */
-			tkey->rx_phase1_done = 0;
-		}
-		if (net_ratelimit()) {
-			printk(KERN_DEBUG "TKIP: ICV error detected: STA="
-			       "%pM\n", hdr->addr2);
-		}
-		tkey->dot11RSNAStatsTKIPICVErrors++;
-		return -5;
-	}
-
-	/* Update real counters only after Michael MIC verification has
-	 * completed */
-	tkey->rx_iv32_new = iv32;
-	tkey->rx_iv16_new = iv16;
-
-	/* Remove IV and ICV */
-	memmove(skb->data + 8, skb->data, hdr_len);
-	skb_pull(skb, 8);
-	skb_trim(skb, skb->len - 4);
-
-	return keyidx;
-}
-
-static int michael_mic(struct crypto_hash *tfm_michael, u8 *key, u8 *hdr,
-			u8 *data, size_t data_len, u8 *mic)
-{
-	struct hash_desc desc;
-	struct scatterlist sg[2];
-
-	if (tfm_michael == NULL) {
-		printk(KERN_WARNING "michael_mic: tfm_michael == NULL\n");
-		return -1;
-	}
-
-	sg_init_table(sg, 2);
-	sg_set_buf(&sg[0], hdr, 16);
-	sg_set_buf(&sg[1], data, data_len);
-
-	if (crypto_hash_setkey(tfm_michael, key, 8))
-		return -1;
-
-	desc.tfm = tfm_michael;
-	desc.flags = 0;
-	return crypto_hash_digest(&desc, sg, data_len + 16, mic);
-}
-
-static void michael_mic_hdr(struct sk_buff *skb, u8 *hdr)
-{
-	struct ieee80211_hdr_4addr *hdr11;
-
-	hdr11 = (struct ieee80211_hdr_4addr *)skb->data;
-	switch (le16_to_cpu(hdr11->frame_ctl) &
-		(IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS)) {
-	case IEEE80211_FCTL_TODS:
-		memcpy(hdr, hdr11->addr3, ETH_ALEN); /* DA */
-		memcpy(hdr + ETH_ALEN, hdr11->addr2, ETH_ALEN); /* SA */
-		break;
-	case IEEE80211_FCTL_FROMDS:
-		memcpy(hdr, hdr11->addr1, ETH_ALEN); /* DA */
-		memcpy(hdr + ETH_ALEN, hdr11->addr3, ETH_ALEN); /* SA */
-		break;
-	case IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS:
-		memcpy(hdr, hdr11->addr3, ETH_ALEN); /* DA */
-		memcpy(hdr + ETH_ALEN, hdr11->addr4, ETH_ALEN); /* SA */
-		break;
-	case 0:
-		memcpy(hdr, hdr11->addr1, ETH_ALEN); /* DA */
-		memcpy(hdr + ETH_ALEN, hdr11->addr2, ETH_ALEN); /* SA */
-		break;
-	}
-
-	hdr[12] = 0; /* priority */
-
-	hdr[13] = hdr[14] = hdr[15] = 0; /* reserved */
-}
-
-
-static int ieee80211_michael_mic_add(struct sk_buff *skb, int hdr_len,
-				     void *priv)
-{
-	struct ieee80211_tkip_data *tkey = priv;
-	u8 *pos;
-	struct ieee80211_hdr_4addr *hdr;
-
-	hdr = (struct ieee80211_hdr_4addr *)skb->data;
-
-	if (skb_tailroom(skb) < 8 || skb->len < hdr_len) {
-		printk(KERN_DEBUG "Invalid packet for Michael MIC add "
-		       "(tailroom=%d hdr_len=%d skb->len=%d)\n",
-		       skb_tailroom(skb), hdr_len, skb->len);
-		return -1;
-	}
-
-	michael_mic_hdr(skb, tkey->tx_hdr);
-
-	if (IEEE80211_QOS_HAS_SEQ(le16_to_cpu(hdr->frame_ctl)))
-		tkey->tx_hdr[12] = *(skb->data + hdr_len - 2) & 0x07;
-
-	pos = skb_put(skb, 8);
-
-	if (michael_mic(tkey->tx_tfm_michael, &tkey->key[16], tkey->tx_hdr,
-			skb->data + hdr_len, skb->len - 8 - hdr_len, pos))
-		return -1;
-
-	return 0;
-}
-
-static void ieee80211_michael_mic_failure(struct net_device *dev,
-					  struct ieee80211_hdr_4addr *hdr,
-					  int keyidx)
-{
-	union iwreq_data wrqu;
-	struct iw_michaelmicfailure ev;
-
-	/* TODO: needed parameters: count, keyid, key type, TSC */
-	memset(&ev, 0, sizeof(ev));
-	ev.flags = keyidx & IW_MICFAILURE_KEY_ID;
-	if (hdr->addr1[0] & 0x01)
-		ev.flags |= IW_MICFAILURE_GROUP;
-	else
-		ev.flags |= IW_MICFAILURE_PAIRWISE;
-	ev.src_addr.sa_family = ARPHRD_ETHER;
-	memcpy(ev.src_addr.sa_data, hdr->addr2, ETH_ALEN);
-	memset(&wrqu, 0, sizeof(wrqu));
-	wrqu.data.length = sizeof(ev);
-	wireless_send_event(dev, IWEVMICHAELMICFAILURE, &wrqu, (char *) &ev);
-}
-
-static int ieee80211_michael_mic_verify(struct sk_buff *skb, int keyidx,
-					int hdr_len, void *priv)
-{
-	struct ieee80211_tkip_data *tkey = priv;
-	u8 mic[8];
-	struct ieee80211_hdr_4addr *hdr;
-
-	hdr = (struct ieee80211_hdr_4addr *)skb->data;
-
-	if (!tkey->key_set)
-		return -1;
-
-	michael_mic_hdr(skb, tkey->rx_hdr);
-	if (IEEE80211_QOS_HAS_SEQ(le16_to_cpu(hdr->frame_ctl)))
-		tkey->rx_hdr[12] = *(skb->data + hdr_len - 2) & 0x07;
-
-	if (michael_mic(tkey->rx_tfm_michael, &tkey->key[24], tkey->rx_hdr,
-			skb->data + hdr_len, skb->len - 8 - hdr_len, mic))
-		return -1;
-
-	if (memcmp(mic, skb->data + skb->len - 8, 8) != 0) {
-		struct ieee80211_hdr_4addr *hdr;
-		hdr = (struct ieee80211_hdr_4addr *)skb->data;
-		printk(KERN_DEBUG "%s: Michael MIC verification failed for "
-		       "MSDU from %pM keyidx=%d\n",
-		       skb->dev ? skb->dev->name : "N/A", hdr->addr2,
-		       keyidx);
-		if (skb->dev)
-			ieee80211_michael_mic_failure(skb->dev, hdr, keyidx);
-		tkey->dot11RSNAStatsTKIPLocalMICFailures++;
-		return -1;
-	}
-
-	/* Update TSC counters for RX now that the packet verification has
-	 * completed. */
-	tkey->rx_iv32 = tkey->rx_iv32_new;
-	tkey->rx_iv16 = tkey->rx_iv16_new;
-
-	skb_trim(skb, skb->len - 8);
-
-	return 0;
-}
-
-
-static int ieee80211_tkip_set_key(void *key, int len, u8 *seq, void *priv)
-{
-	struct ieee80211_tkip_data *tkey = priv;
-	int keyidx;
-	struct crypto_hash *tfm = tkey->tx_tfm_michael;
-	struct crypto_blkcipher *tfm2 = tkey->tx_tfm_arc4;
-	struct crypto_hash *tfm3 = tkey->rx_tfm_michael;
-	struct crypto_blkcipher *tfm4 = tkey->rx_tfm_arc4;
-
-	keyidx = tkey->key_idx;
-	memset(tkey, 0, sizeof(*tkey));
-	tkey->key_idx = keyidx;
-
-	tkey->tx_tfm_michael = tfm;
-	tkey->tx_tfm_arc4 = tfm2;
-	tkey->rx_tfm_michael = tfm3;
-	tkey->rx_tfm_arc4 = tfm4;
-
-	if (len == TKIP_KEY_LEN) {
-		memcpy(tkey->key, key, TKIP_KEY_LEN);
-		tkey->key_set = 1;
-		tkey->tx_iv16 = 1; /* TSC is initialized to 1 */
-		if (seq) {
-			tkey->rx_iv32 = (seq[5] << 24) | (seq[4] << 16) |
-				(seq[3] << 8) | seq[2];
-			tkey->rx_iv16 = (seq[1] << 8) | seq[0];
-		}
-	} else if (len == 0)
-		tkey->key_set = 0;
-	else
-		return -1;
-
-	return 0;
-}
-
-
-static int ieee80211_tkip_get_key(void *key, int len, u8 *seq, void *priv)
-{
-	struct ieee80211_tkip_data *tkey = priv;
-
-	if (len < TKIP_KEY_LEN)
-		return -1;
-
-	if (!tkey->key_set)
-		return 0;
-	memcpy(key, tkey->key, TKIP_KEY_LEN);
-
-	if (seq) {
-		/* Return the sequence number of the last transmitted frame. */
-		u16 iv16 = tkey->tx_iv16;
-		u32 iv32 = tkey->tx_iv32;
-		if (iv16 == 0)
-			iv32--;
-		iv16--;
-		seq[0] = tkey->tx_iv16;
-		seq[1] = tkey->tx_iv16 >> 8;
-		seq[2] = tkey->tx_iv32;
-		seq[3] = tkey->tx_iv32 >> 8;
-		seq[4] = tkey->tx_iv32 >> 16;
-		seq[5] = tkey->tx_iv32 >> 24;
-	}
-
-	return TKIP_KEY_LEN;
-}
-
-
-static char *ieee80211_tkip_print_stats(char *p, void *priv)
-{
-	struct ieee80211_tkip_data *tkip = priv;
-	p += sprintf(p, "key[%d] alg=TKIP key_set=%d "
-		     "tx_pn=%02x%02x%02x%02x%02x%02x "
-		     "rx_pn=%02x%02x%02x%02x%02x%02x "
-		     "replays=%d icv_errors=%d local_mic_failures=%d\n",
-		     tkip->key_idx, tkip->key_set,
-		     (tkip->tx_iv32 >> 24) & 0xff,
-		     (tkip->tx_iv32 >> 16) & 0xff,
-		     (tkip->tx_iv32 >> 8) & 0xff,
-		     tkip->tx_iv32 & 0xff,
-		     (tkip->tx_iv16 >> 8) & 0xff,
-		     tkip->tx_iv16 & 0xff,
-		     (tkip->rx_iv32 >> 24) & 0xff,
-		     (tkip->rx_iv32 >> 16) & 0xff,
-		     (tkip->rx_iv32 >> 8) & 0xff,
-		     tkip->rx_iv32 & 0xff,
-		     (tkip->rx_iv16 >> 8) & 0xff,
-		     tkip->rx_iv16 & 0xff,
-		     tkip->dot11RSNAStatsTKIPReplays,
-		     tkip->dot11RSNAStatsTKIPICVErrors,
-		     tkip->dot11RSNAStatsTKIPLocalMICFailures);
-	return p;
-}
-
-
-static struct ieee80211_crypto_ops ieee80211_crypt_tkip = {
-	.name			= "TKIP",
-	.init			= ieee80211_tkip_init,
-	.deinit			= ieee80211_tkip_deinit,
-	.encrypt_mpdu		= ieee80211_tkip_encrypt,
-	.decrypt_mpdu		= ieee80211_tkip_decrypt,
-	.encrypt_msdu		= ieee80211_michael_mic_add,
-	.decrypt_msdu		= ieee80211_michael_mic_verify,
-	.set_key		= ieee80211_tkip_set_key,
-	.get_key		= ieee80211_tkip_get_key,
-	.print_stats		= ieee80211_tkip_print_stats,
-	.extra_prefix_len	= 4 + 4, /* IV + ExtIV */
-	.extra_postfix_len	= 8 + 4, /* MIC + ICV */
-	.owner		        = THIS_MODULE,
-};
-
-
-int ieee80211_crypto_tkip_init(void)
-{
-	return ieee80211_register_crypto_ops(&ieee80211_crypt_tkip);
-}
-
-
-void ieee80211_crypto_tkip_exit(void)
-{
-	ieee80211_unregister_crypto_ops(&ieee80211_crypt_tkip);
-}
-
-
-void ieee80211_tkip_null(void)
-{
-}
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_wep.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_wep.c
deleted file mode 100644
index f25367224941..000000000000
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_wep.c
+++ /dev/null
@@ -1,277 +0,0 @@
-/*
- * Host AP crypt: host-based WEP encryption implementation for Host AP driver
- *
- * Copyright (c) 2002-2004, Jouni Malinen <jkmaline@cc.hut.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation. See README and COPYING for
- * more details.
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/skbuff.h>
-#include <linux/string.h>
-
-#include "ieee80211.h"
-
-#include <linux/crypto.h>
-#include <linux/scatterlist.h>
-#include <linux/crc32.h>
-
-MODULE_AUTHOR("Jouni Malinen");
-MODULE_DESCRIPTION("Host AP crypt: WEP");
-MODULE_LICENSE("GPL");
-
-struct prism2_wep_data {
-	u32 iv;
-#define WEP_KEY_LEN 13
-	u8 key[WEP_KEY_LEN + 1];
-	u8 key_len;
-	u8 key_idx;
-	struct crypto_blkcipher *tx_tfm;
-	struct crypto_blkcipher *rx_tfm;
-};
-
-static void *prism2_wep_init(int keyidx)
-{
-	struct prism2_wep_data *priv;
-
-	priv = kzalloc(sizeof(*priv), GFP_ATOMIC);
-	if (priv == NULL)
-		goto fail;
-	priv->key_idx = keyidx;
-	priv->tx_tfm = crypto_alloc_blkcipher("ecb(arc4)", 0, CRYPTO_ALG_ASYNC);
-	if (IS_ERR(priv->tx_tfm)) {
-		pr_debug("could not allocate crypto API arc4\n");
-		priv->tx_tfm = NULL;
-		goto fail;
-	}
-	priv->rx_tfm = crypto_alloc_blkcipher("ecb(arc4)", 0, CRYPTO_ALG_ASYNC);
-	if (IS_ERR(priv->rx_tfm)) {
-		pr_debug("could not allocate crypto API arc4\n");
-		priv->rx_tfm = NULL;
-		goto fail;
-	}
-
-	/* start WEP IV from a random value */
-	get_random_bytes(&priv->iv, 4);
-
-	return priv;
-
-fail:
-	if (priv) {
-		if (priv->tx_tfm)
-			crypto_free_blkcipher(priv->tx_tfm);
-		if (priv->rx_tfm)
-			crypto_free_blkcipher(priv->rx_tfm);
-		kfree(priv);
-	}
-
-	return NULL;
-}
-
-static void prism2_wep_deinit(void *priv)
-{
-	struct prism2_wep_data *_priv = priv;
-
-	if (_priv) {
-		if (_priv->tx_tfm)
-			crypto_free_blkcipher(_priv->tx_tfm);
-		if (_priv->rx_tfm)
-			crypto_free_blkcipher(_priv->rx_tfm);
-	}
-
-	kfree(priv);
-}
-
-/* Perform WEP encryption on given skb that has at least 4 bytes of headroom
- * for IV and 4 bytes of tailroom for ICV. Both IV and ICV will be transmitted,
- * so the payload length increases with 8 bytes.
- *
- * WEP frame payload: IV + TX key idx, RC4(data), ICV = RC4(CRC32(data))
- */
-static int prism2_wep_encrypt(struct sk_buff *skb, int hdr_len, void *priv)
-{
-	struct prism2_wep_data *wep = priv;
-	struct blkcipher_desc desc = { .tfm = wep->tx_tfm };
-	u32 klen, len;
-	u8 key[WEP_KEY_LEN + 3];
-	u8 *pos;
-	u32 crc;
-	u8 *icv;
-	struct scatterlist sg;
-
-	if (skb_headroom(skb) < 4 || skb_tailroom(skb) < 4 ||
-	    skb->len < hdr_len)
-		return -1;
-
-	len = skb->len - hdr_len;
-	pos = skb_push(skb, 4);
-	memmove(pos, pos + 4, hdr_len);
-	pos += hdr_len;
-
-	klen = 3 + wep->key_len;
-
-	wep->iv++;
-
-	/* Fluhrer, Mantin, and Shamir have reported weaknesses in the key
-	 * scheduling algorithm of RC4. At least IVs (KeyByte + 3, 0xff, N)
-	 * can be used to speedup attacks, so avoid using them. */
-	if ((wep->iv & 0xff00) == 0xff00) {
-		u8 B = (wep->iv >> 16) & 0xff;
-		if (B >= 3 && B < klen)
-			wep->iv += 0x0100;
-	}
-
-	/* Prepend 24-bit IV to RC4 key and TX frame */
-	*pos++ = key[0] = (wep->iv >> 16) & 0xff;
-	*pos++ = key[1] = (wep->iv >> 8) & 0xff;
-	*pos++ = key[2] = wep->iv & 0xff;
-	*pos++ = wep->key_idx << 6;
-
-	/* Copy rest of the WEP key (the secret part) */
-	memcpy(key + 3, wep->key, wep->key_len);
-
-	/* Append little-endian CRC32 and encrypt it to produce ICV */
-	crc = ~crc32_le(~0, pos, len);
-	icv = skb_put(skb, 4);
-	icv[0] = crc;
-	icv[1] = crc >> 8;
-	icv[2] = crc >> 16;
-	icv[3] = crc >> 24;
-
-	crypto_blkcipher_setkey(wep->tx_tfm, key, klen);
-	sg_init_one(&sg, pos, len + 4);
-
-	return crypto_blkcipher_encrypt(&desc, &sg, &sg, len + 4);
-}
-
-/* Perform WEP decryption on given buffer. Buffer includes whole WEP part of
- * the frame: IV (4 bytes), encrypted payload (including SNAP header),
- * ICV (4 bytes). len includes both IV and ICV.
- *
- * Returns 0 if frame was decrypted successfully and ICV was correct and -1 on
- * failure. If frame is OK, IV and ICV will be removed.
- */
-static int prism2_wep_decrypt(struct sk_buff *skb, int hdr_len, void *priv)
-{
-	struct prism2_wep_data *wep = priv;
-	struct blkcipher_desc desc = { .tfm = wep->rx_tfm };
-	u32 klen, plen;
-	u8 key[WEP_KEY_LEN + 3];
-	u8 keyidx, *pos;
-	u32 crc;
-	u8 icv[4];
-	struct scatterlist sg;
-
-	if (skb->len < hdr_len + 8)
-		return -1;
-
-	pos = skb->data + hdr_len;
-	key[0] = *pos++;
-	key[1] = *pos++;
-	key[2] = *pos++;
-	keyidx = *pos++ >> 6;
-	if (keyidx != wep->key_idx)
-		return -1;
-
-	klen = 3 + wep->key_len;
-
-	/* Copy rest of the WEP key (the secret part) */
-	memcpy(key + 3, wep->key, wep->key_len);
-
-	/* Apply RC4 to data and compute CRC32 over decrypted data */
-	plen = skb->len - hdr_len - 8;
-
-	crypto_blkcipher_setkey(wep->rx_tfm, key, klen);
-	sg_init_one(&sg, pos, plen + 4);
-
-	if (crypto_blkcipher_decrypt(&desc, &sg, &sg, plen + 4))
-		return -7;
-
-	crc = ~crc32_le(~0, pos, plen);
-	icv[0] = crc;
-	icv[1] = crc >> 8;
-	icv[2] = crc >> 16;
-	icv[3] = crc >> 24;
-
-	if (memcmp(icv, pos + plen, 4) != 0) {
-		/* ICV mismatch - drop frame */
-		return -2;
-	}
-
-	/* Remove IV and ICV */
-	memmove(skb->data + 4, skb->data, hdr_len);
-	skb_pull(skb, 4);
-	skb_trim(skb, skb->len - 4);
-	return 0;
-}
-
-static int prism2_wep_set_key(void *key, int len, u8 *seq, void *priv)
-{
-	struct prism2_wep_data *wep = priv;
-
-	if (len < 0 || len > WEP_KEY_LEN)
-		return -1;
-
-	memcpy(wep->key, key, len);
-	wep->key_len = len;
-
-	return 0;
-}
-
-static int prism2_wep_get_key(void *key, int len, u8 *seq, void *priv)
-{
-	struct prism2_wep_data *wep = priv;
-
-	if (len < wep->key_len)
-		return -1;
-
-	memcpy(key, wep->key, wep->key_len);
-
-	return wep->key_len;
-}
-
-static char *prism2_wep_print_stats(char *p, void *priv)
-{
-	struct prism2_wep_data *wep = priv;
-	p += sprintf(p, "key[%d] alg=WEP len=%d\n",
-		     wep->key_idx, wep->key_len);
-	return p;
-}
-
-static struct ieee80211_crypto_ops ieee80211_crypt_wep = {
-	.name			= "WEP",
-	.init			= prism2_wep_init,
-	.deinit			= prism2_wep_deinit,
-	.encrypt_mpdu		= prism2_wep_encrypt,
-	.decrypt_mpdu		= prism2_wep_decrypt,
-	.encrypt_msdu		= NULL,
-	.decrypt_msdu		= NULL,
-	.set_key		= prism2_wep_set_key,
-	.get_key		= prism2_wep_get_key,
-	.print_stats		= prism2_wep_print_stats,
-	.extra_prefix_len	= 4, /* IV */
-	.extra_postfix_len	= 4, /* ICV */
-	.owner			= THIS_MODULE,
-};
-
-int ieee80211_crypto_wep_init(void)
-{
-	return ieee80211_register_crypto_ops(&ieee80211_crypt_wep);
-}
-
-void ieee80211_crypto_wep_exit(void)
-{
-	ieee80211_unregister_crypto_ops(&ieee80211_crypt_wep);
-}
-
-void ieee80211_wep_null(void)
-{
-	return;
-}
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_module.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_module.c
deleted file mode 100644
index 07a1fbb6678e..000000000000
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_module.c
+++ /dev/null
@@ -1,203 +0,0 @@
-/*******************************************************************************
-
-  Copyright(c) 2004 Intel Corporation. All rights reserved.
-
-  Portions of this file are based on the WEP enablement code provided by the
-  Host AP project hostap-drivers v0.1.3
-  Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
-  <jkmaline@cc.hut.fi>
-  Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
-
-  This program is free software; you can redistribute it and/or modify it
-  under the terms of version 2 of the GNU General Public License as
-  published by the Free Software Foundation.
-
-  This program is distributed in the hope that it will be useful, but WITHOUT
-  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-  more details.
-
-  You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc., 59
-  Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-
-  The full GNU General Public License is included in this distribution in the
-  file called LICENSE.
-
-  Contact Information:
-  James P. Ketrenos <ipw2100-admin@linux.intel.com>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#include <linux/compiler.h>
-//#include <linux/config.h>
-#include <linux/errno.h>
-#include <linux/if_arp.h>
-#include <linux/in6.h>
-#include <linux/in.h>
-#include <linux/ip.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/netdevice.h>
-#include <linux/pci.h>
-#include <linux/proc_fs.h>
-#include <linux/skbuff.h>
-#include <linux/slab.h>
-#include <linux/tcp.h>
-#include <linux/types.h>
-#include <linux/wireless.h>
-#include <linux/etherdevice.h>
-#include <linux/uaccess.h>
-#include <net/arp.h>
-#include <net/net_namespace.h>
-
-#include "ieee80211.h"
-
-MODULE_DESCRIPTION("802.11 data/management/control stack");
-MODULE_AUTHOR("Copyright (C) 2004 Intel Corporation <jketreno@linux.intel.com>");
-MODULE_LICENSE("GPL");
-
-#define DRV_NAME "ieee80211"
-
-static inline int ieee80211_networks_allocate(struct ieee80211_device *ieee)
-{
-	if (ieee->networks)
-		return 0;
-
-	ieee->networks = kcalloc(
-		MAX_NETWORK_COUNT, sizeof(struct ieee80211_network),
-		GFP_KERNEL);
-	if (!ieee->networks)
-		return -ENOMEM;
-
-	return 0;
-}
-
-static inline void ieee80211_networks_free(struct ieee80211_device *ieee)
-{
-	if (!ieee->networks)
-		return;
-	kfree(ieee->networks);
-	ieee->networks = NULL;
-}
-
-static inline void ieee80211_networks_initialize(struct ieee80211_device *ieee)
-{
-	int i;
-
-	INIT_LIST_HEAD(&ieee->network_free_list);
-	INIT_LIST_HEAD(&ieee->network_list);
-	for (i = 0; i < MAX_NETWORK_COUNT; i++)
-		list_add_tail(&ieee->networks[i].list, &ieee->network_free_list);
-}
-
-
-struct net_device *alloc_ieee80211(int sizeof_priv)
-{
-	struct ieee80211_device *ieee;
-	struct net_device *dev;
-	int i, err;
-
-	IEEE80211_DEBUG_INFO("Initializing...\n");
-
-	dev = alloc_etherdev(sizeof(struct ieee80211_device) + sizeof_priv);
-	if (!dev) {
-		IEEE80211_ERROR("Unable to network device.\n");
-		goto failed;
-	}
-	ieee = netdev_priv(dev);
-
-	ieee->dev = dev;
-
-	err = ieee80211_networks_allocate(ieee);
-	if (err) {
-		IEEE80211_ERROR("Unable to allocate beacon storage: %d\n",
-				err);
-		goto failed;
-	}
-	ieee80211_networks_initialize(ieee);
-
-	/* Default fragmentation threshold is maximum payload size */
-	ieee->fts = DEFAULT_FTS;
-	ieee->scan_age = DEFAULT_MAX_SCAN_AGE;
-	ieee->open_wep = 1;
-
-	/* Default to enabling full open WEP with host based encrypt/decrypt */
-	ieee->host_encrypt = 1;
-	ieee->host_decrypt = 1;
-	ieee->ieee802_1x = 1; /* Default to supporting 802.1x */
-
-	INIT_LIST_HEAD(&ieee->crypt_deinit_list);
-	init_timer(&ieee->crypt_deinit_timer);
-	ieee->crypt_deinit_timer.data = (unsigned long)ieee;
-	ieee->crypt_deinit_timer.function = ieee80211_crypt_deinit_handler;
-
-	spin_lock_init(&ieee->lock);
-	spin_lock_init(&ieee->wpax_suitlist_lock);
-
-	ieee->wpax_type_set = 0;
-	ieee->wpa_enabled = 0;
-	ieee->tkip_countermeasures = 0;
-	ieee->drop_unencrypted = 0;
-	ieee->privacy_invoked = 0;
-	ieee->ieee802_1x = 1;
-	ieee->raw_tx = 0;
-
-	ieee80211_softmac_init(ieee);
-
-	for (i = 0; i < IEEE_IBSS_MAC_HASH_SIZE; i++)
-		INIT_LIST_HEAD(&ieee->ibss_mac_hash[i]);
-
-	for (i = 0; i < 17; i++) {
-		ieee->last_rxseq_num[i] = -1;
-		ieee->last_rxfrag_num[i] = -1;
-		ieee->last_packet_time[i] = 0;
-	}
-//These function were added to load crypte module autoly
-	ieee80211_tkip_null();
-	ieee80211_wep_null();
-	ieee80211_ccmp_null();
-	return dev;
-
- failed:
-	if (dev)
-		free_netdev(dev);
-	return NULL;
-}
-
-
-void free_ieee80211(struct net_device *dev)
-{
-	struct ieee80211_device *ieee = netdev_priv(dev);
-
-	int i;
-	struct list_head *p, *q;
-
-
-	ieee80211_softmac_free(ieee);
-	del_timer_sync(&ieee->crypt_deinit_timer);
-	ieee80211_crypt_deinit_entries(ieee, 1);
-
-	for (i = 0; i < WEP_KEYS; i++) {
-		struct ieee80211_crypt_data *crypt = ieee->crypt[i];
-		if (crypt) {
-			if (crypt->ops)
-				crypt->ops->deinit(crypt->priv);
-			kfree(crypt);
-			ieee->crypt[i] = NULL;
-		}
-	}
-
-	ieee80211_networks_free(ieee);
-
-	for (i = 0; i < IEEE_IBSS_MAC_HASH_SIZE; i++) {
-		list_for_each_safe(p, q, &ieee->ibss_mac_hash[i]) {
-			kfree(list_entry(p, struct ieee_ibss_seq, list));
-			list_del(p);
-		}
-	}
-
-
-	free_netdev(dev);
-}
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c
deleted file mode 100644
index b522b57a2691..000000000000
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c
+++ /dev/null
@@ -1,1486 +0,0 @@
-/*
- * Original code based Host AP (software wireless LAN access point) driver
- * for Intersil Prism2/2.5/3 - hostap.o module, common routines
- *
- * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
- * <jkmaline@cc.hut.fi>
- * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
- * Copyright (c) 2004, Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation. See README and COPYING for
- * more details.
- ******************************************************************************
-
-  Few modifications for Realtek's Wi-Fi drivers by
-  Andrea Merello <andrea.merello@gmail.com>
-
-  A special thanks goes to Realtek for their support !
-
-******************************************************************************/
-
-
-#include <linux/compiler.h>
-//#include <linux/config.h>
-#include <linux/errno.h>
-#include <linux/if_arp.h>
-#include <linux/in6.h>
-#include <linux/in.h>
-#include <linux/ip.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/netdevice.h>
-#include <linux/pci.h>
-#include <linux/proc_fs.h>
-#include <linux/skbuff.h>
-#include <linux/slab.h>
-#include <linux/tcp.h>
-#include <linux/types.h>
-#include <linux/wireless.h>
-#include <linux/etherdevice.h>
-#include <linux/uaccess.h>
-#include <linux/ctype.h>
-
-#include "ieee80211.h"
-#include "dot11d.h"
-static inline void ieee80211_monitor_rx(struct ieee80211_device *ieee,
-					struct sk_buff *skb,
-					struct ieee80211_rx_stats *rx_stats)
-{
-	struct ieee80211_hdr_4addr *hdr =
-		(struct ieee80211_hdr_4addr *)skb->data;
-	u16 fc = le16_to_cpu(hdr->frame_ctl);
-
-	skb->dev = ieee->dev;
-	skb_reset_mac_header(skb);
-	skb_pull(skb, ieee80211_get_hdrlen(fc));
-	skb->pkt_type = PACKET_OTHERHOST;
-	skb->protocol = __constant_htons(ETH_P_80211_RAW);
-	memset(skb->cb, 0, sizeof(skb->cb));
-	netif_rx(skb);
-}
-
-
-/* Called only as a tasklet (software IRQ) */
-static struct ieee80211_frag_entry *
-ieee80211_frag_cache_find(struct ieee80211_device *ieee, unsigned int seq,
-			  unsigned int frag, u8 tid, u8 *src, u8 *dst)
-{
-	struct ieee80211_frag_entry *entry;
-	int i;
-
-	for (i = 0; i < IEEE80211_FRAG_CACHE_LEN; i++) {
-		entry = &ieee->frag_cache[tid][i];
-		if (entry->skb != NULL &&
-		    time_after(jiffies, entry->first_frag_time + 2 * HZ)) {
-			IEEE80211_DEBUG_FRAG(
-				"expiring fragment cache entry "
-				"seq=%u last_frag=%u\n",
-				entry->seq, entry->last_frag);
-			dev_kfree_skb_any(entry->skb);
-			entry->skb = NULL;
-		}
-
-		if (entry->skb != NULL && entry->seq == seq &&
-		    (entry->last_frag + 1 == frag || frag == -1) &&
-		    memcmp(entry->src_addr, src, ETH_ALEN) == 0 &&
-		    memcmp(entry->dst_addr, dst, ETH_ALEN) == 0)
-			return entry;
-	}
-
-	return NULL;
-}
-
-/* Called only as a tasklet (software IRQ) */
-static struct sk_buff *
-ieee80211_frag_cache_get(struct ieee80211_device *ieee,
-			 struct ieee80211_hdr_4addr *hdr)
-{
-	struct sk_buff *skb = NULL;
-	u16 fc = le16_to_cpu(hdr->frame_ctl);
-	u16 sc = le16_to_cpu(hdr->seq_ctl);
-	unsigned int frag = WLAN_GET_SEQ_FRAG(sc);
-	unsigned int seq = WLAN_GET_SEQ_SEQ(sc);
-	struct ieee80211_frag_entry *entry;
-	struct ieee80211_hdr_3addrqos *hdr_3addrqos;
-	struct ieee80211_hdr_4addrqos *hdr_4addrqos;
-	u8 tid;
-
-	if (((fc & IEEE80211_FCTL_DSTODS) == IEEE80211_FCTL_DSTODS) && IEEE80211_QOS_HAS_SEQ(fc)) {
-		hdr_4addrqos = (struct ieee80211_hdr_4addrqos *)hdr;
-		tid = le16_to_cpu(hdr_4addrqos->qos_ctl) & IEEE80211_QOS_TID;
-		tid = UP2AC(tid);
-		tid++;
-	} else if (IEEE80211_QOS_HAS_SEQ(fc)) {
-		hdr_3addrqos = (struct ieee80211_hdr_3addrqos *)hdr;
-		tid = le16_to_cpu(hdr_3addrqos->qos_ctl) & IEEE80211_QOS_TID;
-		tid = UP2AC(tid);
-		tid++;
-	} else {
-		tid = 0;
-	}
-
-	if (frag == 0) {
-		/* Reserve enough space to fit maximum frame length */
-		skb = dev_alloc_skb(ieee->dev->mtu +
-				    sizeof(struct ieee80211_hdr_4addr) +
-				    8 /* LLC */ +
-				    2 /* alignment */ +
-				    8 /* WEP */ +
-				    ETH_ALEN /* WDS */ +
-				    (IEEE80211_QOS_HAS_SEQ(fc) ? 2 : 0) /* QOS Control */);
-		if (skb == NULL)
-			return NULL;
-
-		entry = &ieee->frag_cache[tid][ieee->frag_next_idx[tid]];
-		ieee->frag_next_idx[tid]++;
-		if (ieee->frag_next_idx[tid] >= IEEE80211_FRAG_CACHE_LEN)
-			ieee->frag_next_idx[tid] = 0;
-
-		if (entry->skb != NULL)
-			dev_kfree_skb_any(entry->skb);
-
-		entry->first_frag_time = jiffies;
-		entry->seq = seq;
-		entry->last_frag = frag;
-		entry->skb = skb;
-		memcpy(entry->src_addr, hdr->addr2, ETH_ALEN);
-		memcpy(entry->dst_addr, hdr->addr1, ETH_ALEN);
-	} else {
-		/* received a fragment of a frame for which the head fragment
-		 * should have already been received */
-		entry = ieee80211_frag_cache_find(ieee, seq, frag, tid, hdr->addr2,
-						  hdr->addr1);
-		if (entry != NULL) {
-			entry->last_frag = frag;
-			skb = entry->skb;
-		}
-	}
-
-	return skb;
-}
-
-
-/* Called only as a tasklet (software IRQ) */
-static int ieee80211_frag_cache_invalidate(struct ieee80211_device *ieee,
-					   struct ieee80211_hdr_4addr *hdr)
-{
-	u16 fc = le16_to_cpu(hdr->frame_ctl);
-	u16 sc = le16_to_cpu(hdr->seq_ctl);
-	unsigned int seq = WLAN_GET_SEQ_SEQ(sc);
-	struct ieee80211_frag_entry *entry;
-	struct ieee80211_hdr_3addrqos *hdr_3addrqos;
-	struct ieee80211_hdr_4addrqos *hdr_4addrqos;
-	u8 tid;
-
-	if (((fc & IEEE80211_FCTL_DSTODS) == IEEE80211_FCTL_DSTODS) && IEEE80211_QOS_HAS_SEQ(fc)) {
-		hdr_4addrqos = (struct ieee80211_hdr_4addrqos *)hdr;
-		tid = le16_to_cpu(hdr_4addrqos->qos_ctl) & IEEE80211_QOS_TID;
-		tid = UP2AC(tid);
-		tid++;
-	} else if (IEEE80211_QOS_HAS_SEQ(fc)) {
-		hdr_3addrqos = (struct ieee80211_hdr_3addrqos *)hdr;
-		tid = le16_to_cpu(hdr_3addrqos->qos_ctl) & IEEE80211_QOS_TID;
-		tid = UP2AC(tid);
-		tid++;
-	} else {
-		tid = 0;
-	}
-
-	entry = ieee80211_frag_cache_find(ieee, seq, -1, tid, hdr->addr2,
-					  hdr->addr1);
-
-	if (entry == NULL) {
-		IEEE80211_DEBUG_FRAG(
-			"could not invalidate fragment cache "
-			"entry (seq=%u)\n", seq);
-		return -1;
-	}
-
-	entry->skb = NULL;
-	return 0;
-}
-
-
-
-/* ieee80211_rx_frame_mgtmt
- *
- * Responsible for handling management control frames
- *
- * Called by ieee80211_rx */
-static inline int
-ieee80211_rx_frame_mgmt(struct ieee80211_device *ieee, struct sk_buff *skb,
-			struct ieee80211_rx_stats *rx_stats, u16 type,
-			u16 stype)
-{
-	struct ieee80211_hdr_4addr *hdr;
-
-	// cheat the the hdr type
-	hdr = (struct ieee80211_hdr_4addr *)skb->data;
-
-	/* On the struct stats definition there is written that
-	 * this is not mandatory.... but seems that the probe
-	 * response parser uses it
-	 */
-	rx_stats->len = skb->len;
-	ieee80211_rx_mgt(ieee, (struct ieee80211_hdr_4addr *)skb->data,
-			 rx_stats);
-
-	if ((ieee->state == IEEE80211_LINKED) && (memcmp(hdr->addr3, ieee->current_network.bssid, ETH_ALEN))) {
-		dev_kfree_skb_any(skb);
-		return 0;
-	}
-
-	ieee80211_rx_frame_softmac(ieee, skb, rx_stats, type, stype);
-
-	dev_kfree_skb_any(skb);
-
-	return 0;
-
-}
-
-
-
-/* See IEEE 802.1H for LLC/SNAP encapsulation/decapsulation */
-/* Ethernet-II snap header (RFC1042 for most EtherTypes) */
-static unsigned char rfc1042_header[] = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 };
-/* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */
-static unsigned char bridge_tunnel_header[] = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 };
-/* No encapsulation header if EtherType < 0x600 (=length) */
-
-/* Called by ieee80211_rx_frame_decrypt */
-static int ieee80211_is_eapol_frame(struct ieee80211_device *ieee,
-				    struct sk_buff *skb, size_t hdrlen)
-{
-	struct net_device *dev = ieee->dev;
-	u16 fc, ethertype;
-	struct ieee80211_hdr_4addr *hdr;
-	u8 *pos;
-
-	if (skb->len < 24)
-		return 0;
-
-	hdr = (struct ieee80211_hdr_4addr *)skb->data;
-	fc = le16_to_cpu(hdr->frame_ctl);
-
-	/* check that the frame is unicast frame to us */
-	if ((fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) ==
-	    IEEE80211_FCTL_TODS &&
-	    memcmp(hdr->addr1, dev->dev_addr, ETH_ALEN) == 0 &&
-	    memcmp(hdr->addr3, dev->dev_addr, ETH_ALEN) == 0) {
-		/* ToDS frame with own addr BSSID and DA */
-	} else if ((fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) ==
-		   IEEE80211_FCTL_FROMDS &&
-		   memcmp(hdr->addr1, dev->dev_addr, ETH_ALEN) == 0) {
-		/* FromDS frame with own addr as DA */
-	} else
-		return 0;
-
-	if (skb->len < 24 + 8)
-		return 0;
-
-	/* check for port access entity Ethernet type */
-//	pos = skb->data + 24;
-	pos = skb->data + hdrlen;
-	ethertype = (pos[6] << 8) | pos[7];
-	if (ethertype == ETH_P_PAE)
-		return 1;
-
-	return 0;
-}
-
-/* Called only as a tasklet (software IRQ), by ieee80211_rx */
-static inline int
-ieee80211_rx_frame_decrypt(struct ieee80211_device *ieee, struct sk_buff *skb,
-			   struct ieee80211_crypt_data *crypt)
-{
-	struct ieee80211_hdr_4addr *hdr;
-	int res, hdrlen;
-
-	if (crypt == NULL || crypt->ops->decrypt_mpdu == NULL)
-		return 0;
-
-	hdr = (struct ieee80211_hdr_4addr *)skb->data;
-	hdrlen = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl));
-
-#ifdef CONFIG_IEEE80211_CRYPT_TKIP
-	if (ieee->tkip_countermeasures &&
-	    strcmp(crypt->ops->name, "TKIP") == 0) {
-		if (net_ratelimit()) {
-			netdev_dbg(ieee->dev,
-				   "TKIP countermeasures: dropped received packet from %pM\n",
-				   ieee->dev->name, hdr->addr2);
-		}
-		return -1;
-	}
-#endif
-
-	atomic_inc(&crypt->refcnt);
-	res = crypt->ops->decrypt_mpdu(skb, hdrlen, crypt->priv);
-	atomic_dec(&crypt->refcnt);
-	if (res < 0) {
-		IEEE80211_DEBUG_DROP(
-			"decryption failed (SA=%pM"
-			") res=%d\n", hdr->addr2, res);
-		if (res == -2)
-			IEEE80211_DEBUG_DROP("Decryption failed ICV "
-					     "mismatch (key %d)\n",
-					     skb->data[hdrlen + 3] >> 6);
-		ieee->ieee_stats.rx_discards_undecryptable++;
-		return -1;
-	}
-
-	return res;
-}
-
-
-/* Called only as a tasklet (software IRQ), by ieee80211_rx */
-static inline int
-ieee80211_rx_frame_decrypt_msdu(struct ieee80211_device *ieee,
-				struct sk_buff *skb, int keyidx,
-				struct ieee80211_crypt_data *crypt)
-{
-	struct ieee80211_hdr_4addr *hdr;
-	int res, hdrlen;
-
-	if (crypt == NULL || crypt->ops->decrypt_msdu == NULL)
-		return 0;
-
-	hdr = (struct ieee80211_hdr_4addr *)skb->data;
-	hdrlen = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl));
-
-	atomic_inc(&crypt->refcnt);
-	res = crypt->ops->decrypt_msdu(skb, keyidx, hdrlen, crypt->priv);
-	atomic_dec(&crypt->refcnt);
-	if (res < 0) {
-		netdev_dbg(ieee->dev,
-			   "MSDU decryption/MIC verification failed (SA=%pM keyidx=%d)\n",
-			   hdr->addr2, keyidx);
-		return -1;
-	}
-
-	return 0;
-}
-
-
-/* this function is stolen from ipw2200 driver*/
-#define IEEE_PACKET_RETRY_TIME (5*HZ)
-static int is_duplicate_packet(struct ieee80211_device *ieee,
-			       struct ieee80211_hdr_4addr *header)
-{
-	u16 fc = le16_to_cpu(header->frame_ctl);
-	u16 sc = le16_to_cpu(header->seq_ctl);
-	u16 seq = WLAN_GET_SEQ_SEQ(sc);
-	u16 frag = WLAN_GET_SEQ_FRAG(sc);
-	u16 *last_seq, *last_frag;
-	unsigned long *last_time;
-	struct ieee80211_hdr_3addrqos *hdr_3addrqos;
-	struct ieee80211_hdr_4addrqos *hdr_4addrqos;
-	u8 tid;
-
-	//TO2DS and QoS
-	if (((fc & IEEE80211_FCTL_DSTODS) == IEEE80211_FCTL_DSTODS) && IEEE80211_QOS_HAS_SEQ(fc)) {
-		hdr_4addrqos = (struct ieee80211_hdr_4addrqos *)header;
-		tid = le16_to_cpu(hdr_4addrqos->qos_ctl) & IEEE80211_QOS_TID;
-		tid = UP2AC(tid);
-		tid++;
-	} else if (IEEE80211_QOS_HAS_SEQ(fc)) { //QoS
-		hdr_3addrqos = (struct ieee80211_hdr_3addrqos *)header;
-		tid = le16_to_cpu(hdr_3addrqos->qos_ctl) & IEEE80211_QOS_TID;
-		tid = UP2AC(tid);
-		tid++;
-	} else { // no QoS
-		tid = 0;
-	}
-	switch (ieee->iw_mode) {
-	case IW_MODE_ADHOC:
-	{
-		struct list_head *p;
-		struct ieee_ibss_seq *entry = NULL;
-		u8 *mac = header->addr2;
-		int index = mac[5] % IEEE_IBSS_MAC_HASH_SIZE;
-
-		list_for_each(p, &ieee->ibss_mac_hash[index]) {
-			entry = list_entry(p, struct ieee_ibss_seq, list);
-			if (!memcmp(entry->mac, mac, ETH_ALEN))
-				break;
-		}
-	//	if (memcmp(entry->mac, mac, ETH_ALEN)){
-		if (p == &ieee->ibss_mac_hash[index]) {
-			entry = kmalloc(sizeof(struct ieee_ibss_seq), GFP_ATOMIC);
-			if (!entry)
-				return 0;
-
-			memcpy(entry->mac, mac, ETH_ALEN);
-			entry->seq_num[tid] = seq;
-			entry->frag_num[tid] = frag;
-			entry->packet_time[tid] = jiffies;
-			list_add(&entry->list, &ieee->ibss_mac_hash[index]);
-			return 0;
-		}
-		last_seq = &entry->seq_num[tid];
-		last_frag = &entry->frag_num[tid];
-		last_time = &entry->packet_time[tid];
-		break;
-	}
-
-	case IW_MODE_INFRA:
-		last_seq = &ieee->last_rxseq_num[tid];
-		last_frag = &ieee->last_rxfrag_num[tid];
-		last_time = &ieee->last_packet_time[tid];
-
-		break;
-	default:
-		return 0;
-	}
-
-//	if(tid != 0) {
-//		printk(KERN_WARNING ":)))))))))))%x %x %x, fc(%x)\n", tid, *last_seq, seq, header->frame_ctl);
-//	}
-	if ((*last_seq == seq) &&
-	    time_after(*last_time + IEEE_PACKET_RETRY_TIME, jiffies)) {
-		if (*last_frag == frag) {
-			//printk(KERN_WARNING "[1] go drop!\n");
-			goto drop;
-
-		}
-		if (*last_frag + 1 != frag)
-			/* out-of-order fragment */
-			//printk(KERN_WARNING "[2] go drop!\n");
-			goto drop;
-	} else
-		*last_seq = seq;
-
-	*last_frag = frag;
-	*last_time = jiffies;
-	return 0;
-
-drop:
-//	BUG_ON(!(fc & IEEE80211_FCTL_RETRY));
-//	printk("DUP\n");
-
-	return 1;
-}
-
-
-/* All received frames are sent to this function. @skb contains the frame in
- * IEEE 802.11 format, i.e., in the format it was sent over air.
- * This function is called only as a tasklet (software IRQ). */
-int ieee80211_rtl_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
-		     struct ieee80211_rx_stats *rx_stats)
-{
-	struct net_device *dev = ieee->dev;
-	//struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	struct ieee80211_hdr_4addr *hdr;
-
-	size_t hdrlen;
-	u16 fc, type, stype, sc;
-	struct net_device_stats *stats;
-	unsigned int frag;
-	u8 *payload;
-	u16 ethertype;
-	u8 dst[ETH_ALEN];
-	u8 src[ETH_ALEN];
-	u8 bssid[ETH_ALEN];
-	struct ieee80211_crypt_data *crypt = NULL;
-	int keyidx = 0;
-
-	// cheat the the hdr type
-	hdr = (struct ieee80211_hdr_4addr *)skb->data;
-	stats = &ieee->stats;
-
-	if (skb->len < 10) {
-		netdev_info(ieee->dev, "SKB length < 10\n");
-		goto rx_dropped;
-	}
-
-	fc = le16_to_cpu(hdr->frame_ctl);
-	type = WLAN_FC_GET_TYPE(fc);
-	stype = WLAN_FC_GET_STYPE(fc);
-	sc = le16_to_cpu(hdr->seq_ctl);
-
-	frag = WLAN_GET_SEQ_FRAG(sc);
-
-//YJ,add,080828,for keep alive
-	if ((fc & IEEE80211_FCTL_TODS) != IEEE80211_FCTL_TODS) {
-		if (!memcmp(hdr->addr1, dev->dev_addr, ETH_ALEN))
-			ieee->NumRxUnicast++;
-	} else {
-		if (!memcmp(hdr->addr3, dev->dev_addr, ETH_ALEN))
-			ieee->NumRxUnicast++;
-	}
-//YJ,add,080828,for keep alive,end
-
-	hdrlen = ieee80211_get_hdrlen(fc);
-
-
-	if (ieee->iw_mode == IW_MODE_MONITOR) {
-		ieee80211_monitor_rx(ieee, skb, rx_stats);
-		stats->rx_packets++;
-		stats->rx_bytes += skb->len;
-		return 1;
-	}
-
-	if (ieee->host_decrypt) {
-		int idx = 0;
-		if (skb->len >= hdrlen + 3)
-			idx = skb->data[hdrlen + 3] >> 6;
-		crypt = ieee->crypt[idx];
-
-		/* allow NULL decrypt to indicate an station specific override
-		 * for default encryption */
-		if (crypt && (crypt->ops == NULL ||
-			      crypt->ops->decrypt_mpdu == NULL))
-			crypt = NULL;
-
-		if (!crypt && (fc & IEEE80211_FCTL_WEP)) {
-			/* This seems to be triggered by some (multicast?)
-			 * frames from other than current BSS, so just drop the
-			 * frames silently instead of filling system log with
-			 * these reports. */
-			IEEE80211_DEBUG_DROP("Decryption failed (not set)"
-					     " (SA=%pM)\n",
-					     hdr->addr2);
-			ieee->ieee_stats.rx_discards_undecryptable++;
-			goto rx_dropped;
-		}
-	}
-
-	if (skb->len < IEEE80211_DATA_HDR3_LEN)
-		goto rx_dropped;
-
-	// if QoS enabled, should check the sequence for each of the AC
-	if (is_duplicate_packet(ieee, hdr))
-		goto rx_dropped;
-
-
-	if (type == IEEE80211_FTYPE_MGMT) {
-		if (ieee80211_rx_frame_mgmt(ieee, skb, rx_stats, type, stype))
-			goto rx_dropped;
-		else
-			goto rx_exit;
-	}
-
-	/* Data frame - extract src/dst addresses */
-	switch (fc & (IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS)) {
-	case IEEE80211_FCTL_FROMDS:
-		memcpy(dst, hdr->addr1, ETH_ALEN);
-		memcpy(src, hdr->addr3, ETH_ALEN);
-		memcpy(bssid, hdr->addr2, ETH_ALEN);
-		break;
-	case IEEE80211_FCTL_TODS:
-		memcpy(dst, hdr->addr3, ETH_ALEN);
-		memcpy(src, hdr->addr2, ETH_ALEN);
-		memcpy(bssid, hdr->addr1, ETH_ALEN);
-		break;
-	case IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS:
-		if (skb->len < IEEE80211_DATA_HDR4_LEN)
-			goto rx_dropped;
-		memcpy(dst, hdr->addr3, ETH_ALEN);
-		memcpy(src, hdr->addr4, ETH_ALEN);
-		memcpy(bssid, ieee->current_network.bssid, ETH_ALEN);
-		break;
-	case 0:
-		memcpy(dst, hdr->addr1, ETH_ALEN);
-		memcpy(src, hdr->addr2, ETH_ALEN);
-		memcpy(bssid, hdr->addr3, ETH_ALEN);
-		break;
-	}
-
-
-	dev->last_rx = jiffies;
-
-
-	/* Nullfunc frames may have PS-bit set, so they must be passed to
-	 * hostap_handle_sta_rx() before being dropped here. */
-	if (stype != IEEE80211_STYPE_DATA &&
-	    stype != IEEE80211_STYPE_DATA_CFACK &&
-	    stype != IEEE80211_STYPE_DATA_CFPOLL &&
-	    stype != IEEE80211_STYPE_DATA_CFACKPOLL &&
-	    stype != IEEE80211_STYPE_QOS_DATA//add by David,2006.8.4
-	    ) {
-		if (stype != IEEE80211_STYPE_NULLFUNC)
-			IEEE80211_DEBUG_DROP(
-				"RX: dropped data frame "
-				"with no data (type=0x%02x, "
-				"subtype=0x%02x, len=%d)\n",
-				type, stype, skb->len);
-		goto rx_dropped;
-	}
-	if (memcmp(bssid, ieee->current_network.bssid, ETH_ALEN))
-		goto rx_dropped;
-
-	ieee->NumRxDataInPeriod++;
-	ieee->NumRxOkTotal++;
-	/* skb: hdr + (possibly fragmented, possibly encrypted) payload */
-
-	if (ieee->host_decrypt && (fc & IEEE80211_FCTL_WEP) &&
-	    (keyidx = ieee80211_rx_frame_decrypt(ieee, skb, crypt)) < 0)
-		goto rx_dropped;
-
-	hdr = (struct ieee80211_hdr_4addr *)skb->data;
-
-	/* skb: hdr + (possibly fragmented) plaintext payload */
-	// PR: FIXME: hostap has additional conditions in the "if" below:
-	// ieee->host_decrypt && (fc & IEEE80211_FCTL_WEP) &&
-	if ((frag != 0 || (fc & IEEE80211_FCTL_MOREFRAGS))) {
-		int flen;
-		struct sk_buff *frag_skb = ieee80211_frag_cache_get(ieee, hdr);
-		IEEE80211_DEBUG_FRAG("Rx Fragment received (%u)\n", frag);
-
-		if (!frag_skb) {
-			IEEE80211_DEBUG(IEEE80211_DL_RX | IEEE80211_DL_FRAG,
-					"Rx cannot get skb from fragment "
-					"cache (morefrag=%d seq=%u frag=%u)\n",
-					(fc & IEEE80211_FCTL_MOREFRAGS) != 0,
-					WLAN_GET_SEQ_SEQ(sc), frag);
-			goto rx_dropped;
-		}
-		flen = skb->len;
-		if (frag != 0)
-			flen -= hdrlen;
-
-		if (frag_skb->tail + flen > frag_skb->end) {
-			netdev_warn(ieee->dev,
-				    "host decrypted and reassembled frame did not fit skb\n");
-			ieee80211_frag_cache_invalidate(ieee, hdr);
-			goto rx_dropped;
-		}
-
-		if (frag == 0) {
-			/* copy first fragment (including full headers) into
-			 * beginning of the fragment cache skb */
-			memcpy(skb_put(frag_skb, flen), skb->data, flen);
-		} else {
-			/* append frame payload to the end of the fragment
-			 * cache skb */
-			memcpy(skb_put(frag_skb, flen), skb->data + hdrlen,
-			       flen);
-		}
-		dev_kfree_skb_any(skb);
-		skb = NULL;
-
-		if (fc & IEEE80211_FCTL_MOREFRAGS) {
-			/* more fragments expected - leave the skb in fragment
-			 * cache for now; it will be delivered to upper layers
-			 * after all fragments have been received */
-			goto rx_exit;
-		}
-
-		/* this was the last fragment and the frame will be
-		 * delivered, so remove skb from fragment cache */
-		skb = frag_skb;
-		hdr = (struct ieee80211_hdr_4addr *)skb->data;
-		ieee80211_frag_cache_invalidate(ieee, hdr);
-	}
-
-	/* skb: hdr + (possible reassembled) full MSDU payload; possibly still
-	 * encrypted/authenticated */
-	if (ieee->host_decrypt && (fc & IEEE80211_FCTL_WEP) &&
-	    ieee80211_rx_frame_decrypt_msdu(ieee, skb, keyidx, crypt))
-		goto rx_dropped;
-
-	hdr = (struct ieee80211_hdr_4addr *)skb->data;
-	if (crypt && !(fc & IEEE80211_FCTL_WEP) && !ieee->open_wep) {
-		if (/*ieee->ieee802_1x &&*/
-		    ieee80211_is_eapol_frame(ieee, skb, hdrlen)) {
-
-#ifdef CONFIG_IEEE80211_DEBUG
-			/* pass unencrypted EAPOL frames even if encryption is
-			 * configured */
-			struct eapol *eap = (struct eapol *)(skb->data +
-				24);
-			IEEE80211_DEBUG_EAP("RX: IEEE 802.1X EAPOL frame: %s\n",
-						eap_get_type(eap->type));
-#endif
-		} else {
-			IEEE80211_DEBUG_DROP(
-				"encryption configured, but RX "
-				"frame not encrypted (SA=%pM)\n",
-				hdr->addr2);
-			goto rx_dropped;
-		}
-	}
-
-#ifdef CONFIG_IEEE80211_DEBUG
-	if (crypt && !(fc & IEEE80211_FCTL_WEP) &&
-	    ieee80211_is_eapol_frame(ieee, skb, hdrlen)) {
-			struct eapol *eap = (struct eapol *)(skb->data +
-				24);
-			IEEE80211_DEBUG_EAP("RX: IEEE 802.1X EAPOL frame: %s\n",
-						eap_get_type(eap->type));
-	}
-#endif
-
-	if (crypt && !(fc & IEEE80211_FCTL_WEP) && !ieee->open_wep &&
-	    !ieee80211_is_eapol_frame(ieee, skb, hdrlen)) {
-		IEEE80211_DEBUG_DROP(
-			"dropped unencrypted RX data "
-			"frame from %pM"
-			" (drop_unencrypted=1)\n",
-			hdr->addr2);
-		goto rx_dropped;
-	}
-/*
-	if(ieee80211_is_eapol_frame(ieee, skb, hdrlen)) {
-		printk(KERN_WARNING "RX: IEEE802.1X EPAOL frame!\n");
-	}
-*/
-	/* skb: hdr + (possible reassembled) full plaintext payload */
-	payload = skb->data + hdrlen;
-	ethertype = (payload[6] << 8) | payload[7];
-
-
-	/* convert hdr + possible LLC headers into Ethernet header */
-	if (skb->len - hdrlen >= 8 &&
-	    ((memcmp(payload, rfc1042_header, SNAP_SIZE) == 0 &&
-	      ethertype != ETH_P_AARP && ethertype != ETH_P_IPX) ||
-	     memcmp(payload, bridge_tunnel_header, SNAP_SIZE) == 0)) {
-		/* remove RFC1042 or Bridge-Tunnel encapsulation and
-		 * replace EtherType */
-		skb_pull(skb, hdrlen + SNAP_SIZE);
-		memcpy(skb_push(skb, ETH_ALEN), src, ETH_ALEN);
-		memcpy(skb_push(skb, ETH_ALEN), dst, ETH_ALEN);
-	} else {
-		u16 len;
-		/* Leave Ethernet header part of hdr and full payload */
-		skb_pull(skb, hdrlen);
-		len = htons(skb->len);
-		memcpy(skb_push(skb, 2), &len, 2);
-		memcpy(skb_push(skb, ETH_ALEN), src, ETH_ALEN);
-		memcpy(skb_push(skb, ETH_ALEN), dst, ETH_ALEN);
-	}
-
-
-	stats->rx_packets++;
-	stats->rx_bytes += skb->len;
-
-	if (skb) {
-		skb->protocol = eth_type_trans(skb, dev);
-		memset(skb->cb, 0, sizeof(skb->cb));
-		skb->dev = dev;
-		skb->ip_summed = CHECKSUM_NONE; /* 802.11 crc not sufficient */
-		ieee->last_rx_ps_time = jiffies;
-		netif_rx(skb);
-	}
-
- rx_exit:
-	return 1;
-
- rx_dropped:
-	stats->rx_dropped++;
-
-	/* Returning 0 indicates to caller that we have not handled the SKB--
-	 * so it is still allocated and can be used again by underlying
-	 * hardware as a DMA target */
-	return 0;
-}
-
-#define MGMT_FRAME_FIXED_PART_LENGTH		0x24
-
-static inline int ieee80211_is_ofdm_rate(u8 rate)
-{
-	switch (rate & ~IEEE80211_BASIC_RATE_MASK) {
-	case IEEE80211_OFDM_RATE_6MB:
-	case IEEE80211_OFDM_RATE_9MB:
-	case IEEE80211_OFDM_RATE_12MB:
-	case IEEE80211_OFDM_RATE_18MB:
-	case IEEE80211_OFDM_RATE_24MB:
-	case IEEE80211_OFDM_RATE_36MB:
-	case IEEE80211_OFDM_RATE_48MB:
-	case IEEE80211_OFDM_RATE_54MB:
-		return 1;
-	}
-	return 0;
-}
-
-static inline int ieee80211_SignalStrengthTranslate(int CurrSS)
-{
-	int RetSS;
-
-	// Step 1. Scale mapping.
-	if (CurrSS >= 71 && CurrSS <= 100)
-		RetSS = 90 + ((CurrSS - 70) / 3);
-	else if (CurrSS >= 41 && CurrSS <= 70)
-		RetSS = 78 + ((CurrSS - 40) / 3);
-	else if (CurrSS >= 31 && CurrSS <= 40)
-		RetSS = 66 + (CurrSS - 30);
-	else if (CurrSS >= 21 && CurrSS <= 30)
-		RetSS = 54 + (CurrSS - 20);
-	else if (CurrSS >= 5 && CurrSS <= 20)
-		RetSS = 42 + (((CurrSS - 5) * 2) / 3);
-	else if (CurrSS == 4)
-		RetSS = 36;
-	else if (CurrSS == 3)
-		RetSS = 27;
-	else if (CurrSS == 2)
-		RetSS = 18;
-	else if (CurrSS == 1)
-		RetSS = 9;
-	else
-		RetSS = CurrSS;
-
-	//RT_TRACE(COMP_DBG, DBG_LOUD, ("##### After Mapping:  LastSS: %d, CurrSS: %d, RetSS: %d\n", LastSS, CurrSS, RetSS));
-
-	// Step 2. Smoothing.
-
-	//RT_TRACE(COMP_DBG, DBG_LOUD, ("$$$$$ After Smoothing:  LastSS: %d, CurrSS: %d, RetSS: %d\n", LastSS, CurrSS, RetSS));
-
-	return RetSS;
-}
-
-static inline void
-ieee80211_extract_country_ie(struct ieee80211_device *ieee,
-			     struct ieee80211_info_element *info_element,
-			     struct ieee80211_network *network, u8 *addr2)
-{
-	if (IS_DOT11D_ENABLE(ieee)) {
-		if (info_element->len != 0) {
-			memcpy(network->CountryIeBuf, info_element->data, info_element->len);
-			network->CountryIeLen = info_element->len;
-
-			if (!IS_COUNTRY_IE_VALID(ieee))
-				Dot11d_UpdateCountryIe(ieee, addr2, info_element->len, info_element->data);
-		}
-
-		//
-		// 070305, rcnjko: I update country IE watch dog here because
-		// some AP (e.g. Cisco 1242) don't include country IE in their
-		// probe response frame.
-		//
-		if (IS_EQUAL_CIE_SRC(ieee, addr2))
-			UPDATE_CIE_WATCHDOG(ieee);
-	}
-
-}
-
-/* SignalStrengthIndex is 0-100 */
-static int ieee80211_TranslateToDbm(unsigned char SignalStrengthIndex)
-{
-	unsigned char SignalPower; // in dBm.
-
-	// Translate to dBm (x=0.5y-95).
-	SignalPower = (int)SignalStrengthIndex * 7 / 10;
-	SignalPower -= 95;
-
-	return SignalPower;
-}
-inline int ieee80211_network_init(
-	struct ieee80211_device *ieee,
-	struct ieee80211_probe_response *beacon,
-	struct ieee80211_network *network,
-	struct ieee80211_rx_stats *stats)
-{
-#ifdef CONFIG_IEEE80211_DEBUG
-	char rates_str[64];
-	char *p;
-#endif
-	struct ieee80211_info_element *info_element;
-	u16 left;
-	u8 i;
-	short offset;
-	u8 curRate = 0, hOpRate = 0, curRate_ex = 0;
-
-	/* Pull out fixed field data */
-	memcpy(network->bssid, beacon->header.addr3, ETH_ALEN);
-	network->capability = beacon->capability;
-	network->last_scanned = jiffies;
-	network->time_stamp[0] = beacon->time_stamp[0];
-	network->time_stamp[1] = beacon->time_stamp[1];
-	network->beacon_interval = beacon->beacon_interval;
-	/* Where to pull this? beacon->listen_interval;*/
-	network->listen_interval = 0x0A;
-	network->rates_len = network->rates_ex_len = 0;
-	network->last_associate = 0;
-	network->ssid_len = 0;
-	network->flags = 0;
-	network->atim_window = 0;
-	network->QoS_Enable = 0;
-//by amy 080312
-	network->HighestOperaRate = 0;
-//by amy 080312
-	network->Turbo_Enable = 0;
-	network->CountryIeLen = 0;
-	memset(network->CountryIeBuf, 0, MAX_IE_LEN);
-
-	if (stats->freq == IEEE80211_52GHZ_BAND) {
-		/* for A band (No DS info) */
-		network->channel = stats->received_channel;
-	} else
-		network->flags |= NETWORK_HAS_CCK;
-
-	network->wpa_ie_len = 0;
-	network->rsn_ie_len = 0;
-
-	info_element = &beacon->info_element;
-	left = stats->len - ((void *)info_element - (void *)beacon);
-	while (left >= sizeof(struct ieee80211_info_element_hdr)) {
-		if (sizeof(struct ieee80211_info_element_hdr) + info_element->len > left) {
-			IEEE80211_DEBUG_SCAN("SCAN: parse failed: info_element->len + 2 > left : info_element->len+2=%d left=%d.\n",
-					     info_element->len + sizeof(struct ieee80211_info_element),
-					     left);
-			return 1;
-		}
-
-		switch (info_element->id) {
-		case MFIE_TYPE_SSID:
-			if (ieee80211_is_empty_essid(info_element->data,
-						     info_element->len)) {
-				network->flags |= NETWORK_EMPTY_ESSID;
-				break;
-			}
-
-			network->ssid_len = min(info_element->len,
-						(u8)IW_ESSID_MAX_SIZE);
-			memcpy(network->ssid, info_element->data, network->ssid_len);
-			if (network->ssid_len < IW_ESSID_MAX_SIZE)
-				memset(network->ssid + network->ssid_len, 0,
-				       IW_ESSID_MAX_SIZE - network->ssid_len);
-
-			IEEE80211_DEBUG_SCAN("MFIE_TYPE_SSID: '%s' len=%d.\n",
-					     network->ssid, network->ssid_len);
-			break;
-
-		case MFIE_TYPE_RATES:
-#ifdef CONFIG_IEEE80211_DEBUG
-			p = rates_str;
-#endif
-			network->rates_len = min(info_element->len, MAX_RATES_LENGTH);
-			for (i = 0; i < network->rates_len; i++) {
-				network->rates[i] = info_element->data[i];
-				curRate = network->rates[i] & 0x7f;
-				if (hOpRate < curRate)
-					hOpRate = curRate;
-#ifdef CONFIG_IEEE80211_DEBUG
-				p += snprintf(p, sizeof(rates_str) - (p - rates_str), "%02X ", network->rates[i]);
-#endif
-				if (ieee80211_is_ofdm_rate(info_element->data[i])) {
-					network->flags |= NETWORK_HAS_OFDM;
-					if (info_element->data[i] &
-					    IEEE80211_BASIC_RATE_MASK)
-						network->flags &=
-							~NETWORK_HAS_CCK;
-				}
-			}
-
-			IEEE80211_DEBUG_SCAN("MFIE_TYPE_RATES: '%s' (%d)\n",
-					     rates_str, network->rates_len);
-			break;
-
-		case MFIE_TYPE_RATES_EX:
-#ifdef CONFIG_IEEE80211_DEBUG
-			p = rates_str;
-#endif
-			network->rates_ex_len = min(info_element->len, MAX_RATES_EX_LENGTH);
-			for (i = 0; i < network->rates_ex_len; i++) {
-				network->rates_ex[i] = info_element->data[i];
-				curRate_ex = network->rates_ex[i] & 0x7f;
-				if (hOpRate < curRate_ex)
-					hOpRate = curRate_ex;
-#ifdef CONFIG_IEEE80211_DEBUG
-				p += snprintf(p, sizeof(rates_str) - (p - rates_str), "%02X ", network->rates[i]);
-#endif
-				if (ieee80211_is_ofdm_rate(info_element->data[i])) {
-					network->flags |= NETWORK_HAS_OFDM;
-					if (info_element->data[i] &
-					    IEEE80211_BASIC_RATE_MASK)
-						network->flags &=
-							~NETWORK_HAS_CCK;
-				}
-			}
-
-			IEEE80211_DEBUG_SCAN("MFIE_TYPE_RATES_EX: '%s' (%d)\n",
-					     rates_str, network->rates_ex_len);
-			break;
-
-		case MFIE_TYPE_DS_SET:
-			IEEE80211_DEBUG_SCAN("MFIE_TYPE_DS_SET: %d\n",
-					     info_element->data[0]);
-			if (stats->freq == IEEE80211_24GHZ_BAND)
-				network->channel = info_element->data[0];
-			break;
-
-		case MFIE_TYPE_FH_SET:
-			IEEE80211_DEBUG_SCAN("MFIE_TYPE_FH_SET: ignored\n");
-			break;
-
-		case MFIE_TYPE_CF_SET:
-			IEEE80211_DEBUG_SCAN("MFIE_TYPE_CF_SET: ignored\n");
-			break;
-
-		case MFIE_TYPE_TIM:
-
-			if (info_element->len < 4)
-				break;
-
-			network->dtim_period = info_element->data[1];
-
-			if (ieee->state != IEEE80211_LINKED)
-				break;
-
-			network->last_dtim_sta_time[0] = jiffies;
-			network->last_dtim_sta_time[1] = stats->mac_time[1];
-
-			network->dtim_data = IEEE80211_DTIM_VALID;
-
-			if (info_element->data[0] != 0)
-				break;
-
-			if (info_element->data[2] & 1)
-				network->dtim_data |= IEEE80211_DTIM_MBCAST;
-
-			offset = (info_element->data[2] >> 1)*2;
-
-			//printk("offset1:%x aid:%x\n",offset, ieee->assoc_id);
-
-			/* add and modified for ps 2008.1.22 */
-			if (ieee->assoc_id < 8*offset ||
-				ieee->assoc_id > 8*(offset + info_element->len - 3)) {
-				break;
-			}
-
-			offset = (ieee->assoc_id/8) - offset;// + ((aid % 8)? 0 : 1) ;
-
-		//	printk("offset:%x data:%x, ucast:%d\n", offset,
-			//	info_element->data[3+offset] ,
-			//	info_element->data[3+offset] & (1<<(ieee->assoc_id%8)));
-
-			if (info_element->data[3+offset] & (1<<(ieee->assoc_id%8)))
-				network->dtim_data |= IEEE80211_DTIM_UCAST;
-
-			break;
-
-		case MFIE_TYPE_IBSS_SET:
-			IEEE80211_DEBUG_SCAN("MFIE_TYPE_IBSS_SET: ignored\n");
-			break;
-
-		case MFIE_TYPE_CHALLENGE:
-			IEEE80211_DEBUG_SCAN("MFIE_TYPE_CHALLENGE: ignored\n");
-			break;
-
-		case MFIE_TYPE_GENERIC:
-			//nic is 87B
-			IEEE80211_DEBUG_SCAN("MFIE_TYPE_GENERIC: %d bytes\n",
-					     info_element->len);
-			if (info_element->len >= 4  &&
-			    info_element->data[0] == 0x00 &&
-			    info_element->data[1] == 0x50 &&
-			    info_element->data[2] == 0xf2 &&
-			    info_element->data[3] == 0x01) {
-				network->wpa_ie_len = min(info_element->len + 2,
-							 MAX_WPA_IE_LEN);
-				memcpy(network->wpa_ie, info_element,
-				       network->wpa_ie_len);
-			}
-
-			if (info_element->len == 7 &&
-			    info_element->data[0] == 0x00 &&
-			    info_element->data[1] == 0xe0 &&
-			    info_element->data[2] == 0x4c &&
-			    info_element->data[3] == 0x01 &&
-			    info_element->data[4] == 0x02) {
-				network->Turbo_Enable = 1;
-			}
-			if (1 == stats->nic_type) //nic 87
-				break;
-
-			if (info_element->len >= 5  &&
-			    info_element->data[0] == 0x00 &&
-			    info_element->data[1] == 0x50 &&
-			    info_element->data[2] == 0xf2 &&
-			    info_element->data[3] == 0x02 &&
-			    info_element->data[4] == 0x00) {
-				//printk(KERN_WARNING "wmm info updated: %x\n", info_element->data[6]);
-				//WMM Information Element
-				network->wmm_info = info_element->data[6];
-				network->QoS_Enable = 1;
-			}
-
-			if (info_element->len >= 8  &&
-			    info_element->data[0] == 0x00 &&
-			    info_element->data[1] == 0x50 &&
-			    info_element->data[2] == 0xf2 &&
-			    info_element->data[3] == 0x02 &&
-			    info_element->data[4] == 0x01) {
-				// Not care about version at present.
-				//WMM Information Element
-				//printk(KERN_WARNING "wmm info&param updated: %x\n", info_element->data[6]);
-				network->wmm_info = info_element->data[6];
-				//WMM Parameter Element
-				memcpy(network->wmm_param, (u8 *)(info_element->data + 8), (info_element->len - 8));
-				network->QoS_Enable = 1;
-			}
-			break;
-
-		case MFIE_TYPE_RSN:
-			IEEE80211_DEBUG_SCAN("MFIE_TYPE_RSN: %d bytes\n",
-					     info_element->len);
-			network->rsn_ie_len = min(info_element->len + 2,
-						 MAX_WPA_IE_LEN);
-			memcpy(network->rsn_ie, info_element,
-			       network->rsn_ie_len);
-			break;
-		case MFIE_TYPE_COUNTRY:
-			IEEE80211_DEBUG_SCAN("MFIE_TYPE_COUNTRY: %d bytes\n",
-					     info_element->len);
-//			printk("=====>Receive <%s> Country IE\n",network->ssid);
-			ieee80211_extract_country_ie(ieee, info_element, network, beacon->header.addr2);
-			break;
-		default:
-			IEEE80211_DEBUG_SCAN("unsupported IE %d\n",
-					     info_element->id);
-			break;
-		}
-
-		left -= sizeof(struct ieee80211_info_element_hdr) +
-			info_element->len;
-		info_element = (struct ieee80211_info_element *)
-			&info_element->data[info_element->len];
-	}
-//by amy 080312
-	network->HighestOperaRate = hOpRate;
-//by amy 080312
-	network->mode = 0;
-	if (stats->freq == IEEE80211_52GHZ_BAND)
-		network->mode = IEEE_A;
-	else {
-		if (network->flags & NETWORK_HAS_OFDM)
-			network->mode |= IEEE_G;
-		if (network->flags & NETWORK_HAS_CCK)
-			network->mode |= IEEE_B;
-	}
-
-	if (network->mode == 0) {
-		IEEE80211_DEBUG_SCAN("Filtered out '%s (%pM)' "
-				     "network.\n",
-				     escape_essid(network->ssid,
-						  network->ssid_len),
-				     network->bssid);
-		return 1;
-	}
-
-	if (ieee80211_is_empty_essid(network->ssid, network->ssid_len))
-		network->flags |= NETWORK_EMPTY_ESSID;
-
-	stats->signal = ieee80211_TranslateToDbm(stats->signalstrength);
-	//stats->noise = stats->signal - stats->noise;
-	stats->noise = ieee80211_TranslateToDbm(100 - stats->signalstrength) - 25;
-	memcpy(&network->stats, stats, sizeof(network->stats));
-
-	return 0;
-}
-
-static inline int is_same_network(struct ieee80211_network *src,
-				  struct ieee80211_network *dst,
-				  struct ieee80211_device *ieee)
-{
-	/* A network is only a duplicate if the channel, BSSID, ESSID
-	 * and the capability field (in particular IBSS and BSS) all match.
-	 * We treat all <hidden> with the same BSSID and channel
-	 * as one network */
-	return (((src->ssid_len == dst->ssid_len) || (ieee->iw_mode == IW_MODE_INFRA)) &&  //YJ,mod,080819,for hidden ap
-		//((src->ssid_len == dst->ssid_len) &&
-		(src->channel == dst->channel) &&
-		!memcmp(src->bssid, dst->bssid, ETH_ALEN) &&
-		(!memcmp(src->ssid, dst->ssid, src->ssid_len) || (ieee->iw_mode == IW_MODE_INFRA)) && //YJ,mod,080819,for hidden ap
-		//!memcmp(src->ssid, dst->ssid, src->ssid_len) &&
-		((src->capability & WLAN_CAPABILITY_IBSS) ==
-		(dst->capability & WLAN_CAPABILITY_IBSS)) &&
-		((src->capability & WLAN_CAPABILITY_BSS) ==
-		(dst->capability & WLAN_CAPABILITY_BSS)));
-}
-
-inline void update_network(struct ieee80211_network *dst,
-			   struct ieee80211_network *src)
-{
-	unsigned char quality = src->stats.signalstrength;
-	unsigned char signal = 0;
-	unsigned char noise = 0;
-	if (dst->stats.signalstrength > 0)
-		quality = (dst->stats.signalstrength * 5 + src->stats.signalstrength + 5)/6;
-	signal = ieee80211_TranslateToDbm(quality);
-	//noise = signal - src->stats.noise;
-	if (dst->stats.noise > 0)
-		noise = (dst->stats.noise * 5 + src->stats.noise)/6;
-        //if(strcmp(dst->ssid, "linksys_lzm000") == 0)
-//	printk("ssid:%s, quality:%d, signal:%d\n", dst->ssid, quality, signal);
-	memcpy(&dst->stats, &src->stats, sizeof(struct ieee80211_rx_stats));
-	dst->stats.signalstrength = quality;
-	dst->stats.signal = signal;
-//	printk("==================>stats.signal is %d\n",dst->stats.signal);
-	dst->stats.noise = noise;
-
-
-	dst->capability = src->capability;
-	memcpy(dst->rates, src->rates, src->rates_len);
-	dst->rates_len = src->rates_len;
-	memcpy(dst->rates_ex, src->rates_ex, src->rates_ex_len);
-	dst->rates_ex_len = src->rates_ex_len;
-	dst->HighestOperaRate = src->HighestOperaRate;
-	//printk("==========>in %s: src->ssid is %s,chan is %d\n",__func__,src->ssid,src->channel);
-
-	//YJ,add,080819,for hidden ap
-	if (src->ssid_len > 0) {
-		//if(src->ssid_len == 13)
-		//	printk("=====================>>>>>>>> Dst ssid: %s Src ssid: %s\n", dst->ssid, src->ssid);
-		memset(dst->ssid, 0, dst->ssid_len);
-		dst->ssid_len = src->ssid_len;
-		memcpy(dst->ssid, src->ssid, src->ssid_len);
-	}
-	//YJ,add,080819,for hidden ap,end
-
-	dst->channel = src->channel;
-	dst->mode = src->mode;
-	dst->flags = src->flags;
-	dst->time_stamp[0] = src->time_stamp[0];
-	dst->time_stamp[1] = src->time_stamp[1];
-
-	dst->beacon_interval = src->beacon_interval;
-	dst->listen_interval = src->listen_interval;
-	dst->atim_window = src->atim_window;
-	dst->dtim_period = src->dtim_period;
-	dst->dtim_data = src->dtim_data;
-	dst->last_dtim_sta_time[0] = src->last_dtim_sta_time[0];
-	dst->last_dtim_sta_time[1] = src->last_dtim_sta_time[1];
-//	printk("update:%s, dtim_period:%x, dtim_data:%x\n", src->ssid, src->dtim_period, src->dtim_data);
-	memcpy(dst->wpa_ie, src->wpa_ie, src->wpa_ie_len);
-	dst->wpa_ie_len = src->wpa_ie_len;
-	memcpy(dst->rsn_ie, src->rsn_ie, src->rsn_ie_len);
-	dst->rsn_ie_len = src->rsn_ie_len;
-
-	dst->last_scanned = jiffies;
-	/* dst->last_associate is not overwritten */
-// disable QoS process now, added by David 2006/7/25
-#if 1
-	dst->wmm_info = src->wmm_info; //sure to exist in beacon or probe response frame.
-/*
-	if((dst->wmm_info^src->wmm_info)&0x0f) {//Param Set Count change, update Parameter
-	  memcpy(dst->wmm_param, src->wmm_param, IEEE80211_AC_PRAM_LEN);
-	}
-*/
-	if (src->wmm_param[0].ac_aci_acm_aifsn || \
-	   src->wmm_param[1].ac_aci_acm_aifsn || \
-	   src->wmm_param[2].ac_aci_acm_aifsn || \
-	   src->wmm_param[3].ac_aci_acm_aifsn) {
-		memcpy(dst->wmm_param, src->wmm_param, WME_AC_PRAM_LEN);
-	}
-	dst->QoS_Enable = src->QoS_Enable;
-#else
-	dst->QoS_Enable = 1;//for Rtl8187 simulation
-#endif
-	dst->SignalStrength = src->SignalStrength;
-	dst->Turbo_Enable = src->Turbo_Enable;
-	dst->CountryIeLen = src->CountryIeLen;
-	memcpy(dst->CountryIeBuf, src->CountryIeBuf, src->CountryIeLen);
-}
-
-
-inline void
-ieee80211_process_probe_response(struct ieee80211_device *ieee,
-				 struct ieee80211_probe_response *beacon,
-				 struct ieee80211_rx_stats *stats)
-{
-	struct ieee80211_network network;
-	struct ieee80211_network *target;
-	struct ieee80211_network *oldest = NULL;
-#ifdef CONFIG_IEEE80211_DEBUG
-	struct ieee80211_info_element *info_element = &beacon->info_element;
-#endif
-	unsigned long flags;
-	short renew;
-	u8 wmm_info;
-	u8 is_beacon = (WLAN_FC_GET_STYPE(beacon->header.frame_ctl) == IEEE80211_STYPE_BEACON) ? 1 : 0;  //YJ,add,080819,for hidden ap
-
-	memset(&network, 0, sizeof(struct ieee80211_network));
-
-	IEEE80211_DEBUG_SCAN(
-		"'%s' (%pM): %c%c%c%c %c%c%c%c-%c%c%c%c %c%c%c%c\n",
-		escape_essid(info_element->data, info_element->len),
-		beacon->header.addr3,
-		(beacon->capability & (1<<0xf)) ? '1' : '0',
-		(beacon->capability & (1<<0xe)) ? '1' : '0',
-		(beacon->capability & (1<<0xd)) ? '1' : '0',
-		(beacon->capability & (1<<0xc)) ? '1' : '0',
-		(beacon->capability & (1<<0xb)) ? '1' : '0',
-		(beacon->capability & (1<<0xa)) ? '1' : '0',
-		(beacon->capability & (1<<0x9)) ? '1' : '0',
-		(beacon->capability & (1<<0x8)) ? '1' : '0',
-		(beacon->capability & (1<<0x7)) ? '1' : '0',
-		(beacon->capability & (1<<0x6)) ? '1' : '0',
-		(beacon->capability & (1<<0x5)) ? '1' : '0',
-		(beacon->capability & (1<<0x4)) ? '1' : '0',
-		(beacon->capability & (1<<0x3)) ? '1' : '0',
-		(beacon->capability & (1<<0x2)) ? '1' : '0',
-		(beacon->capability & (1<<0x1)) ? '1' : '0',
-		(beacon->capability & (1<<0x0)) ? '1' : '0');
-
-	if (ieee80211_network_init(ieee, beacon, &network, stats)) {
-		IEEE80211_DEBUG_SCAN("Dropped '%s' (%pM) via %s.\n",
-				     escape_essid(info_element->data,
-						  info_element->len),
-				     beacon->header.addr3,
-				     WLAN_FC_GET_STYPE(beacon->header.frame_ctl) ==
-				     IEEE80211_STYPE_PROBE_RESP ?
-				     "PROBE RESPONSE" : "BEACON");
-		return;
-	}
-
-	// For Asus EeePc request,
-	// (1) if wireless adapter receive get any 802.11d country code in AP beacon,
-	//	   wireless adapter should follow the country code.
-	// (2)  If there is no any country code in beacon,
-	//       then wireless adapter should do active scan from ch1~11 and
-	//       passive scan from ch12~14
-	if (ieee->bGlobalDomain) {
-		if (WLAN_FC_GET_STYPE(beacon->header.frame_ctl) == IEEE80211_STYPE_PROBE_RESP) {
-			// Case 1: Country code
-			if (IS_COUNTRY_IE_VALID(ieee)) {
-				if (!IsLegalChannel(ieee, network.channel)) {
-					printk("GetScanInfo(): For Country code, filter probe response at channel(%d).\n", network.channel);
-					return;
-				}
-			}
-			// Case 2: No any country code.
-			else {
-				// Filter over channel ch12~14
-				if (network.channel > 11) {
-					printk("GetScanInfo(): For Global Domain, filter probe response at channel(%d).\n", network.channel);
-					return;
-				}
-			}
-		} else {
-			// Case 1: Country code
-			if (IS_COUNTRY_IE_VALID(ieee)) {
-				if (!IsLegalChannel(ieee, network.channel)) {
-					printk("GetScanInfo(): For Country code, filter beacon at channel(%d).\n", network.channel);
-					return;
-				}
-			}
-			// Case 2: No any country code.
-			else {
-				// Filter over channel ch12~14
-				if (network.channel > 14) {
-					printk("GetScanInfo(): For Global Domain, filter beacon at channel(%d).\n", network.channel);
-					return;
-				}
-			}
-		}
-	}
-	/* The network parsed correctly -- so now we scan our known networks
-	 * to see if we can find it in our list.
-	 *
-	 * NOTE:  This search is definitely not optimized.  Once its doing
-	 *        the "right thing" we'll optimize it for efficiency if
-	 *        necessary */
-
-	/* Search for this entry in the list and update it if it is
-	 * already there. */
-
-	spin_lock_irqsave(&ieee->lock, flags);
-
-	if (is_same_network(&ieee->current_network, &network, ieee)) {
-		wmm_info = ieee->current_network.wmm_info;
-		//YJ,add,080819,for hidden ap
-		if (is_beacon == 0)
-			network.flags = (~NETWORK_EMPTY_ESSID & network.flags)|(NETWORK_EMPTY_ESSID & ieee->current_network.flags);
-		else if (ieee->state == IEEE80211_LINKED)
-			ieee->NumRxBcnInPeriod++;
-		//YJ,add,080819,for hidden ap,end
-		//printk("====>network.ssid=%s cur_ssid=%s\n", network.ssid, ieee->current_network.ssid);
-		update_network(&ieee->current_network, &network);
-	}
-
-	list_for_each_entry(target, &ieee->network_list, list) {
-		if (is_same_network(target, &network, ieee))
-			break;
-		if ((oldest == NULL) ||
-		    (target->last_scanned < oldest->last_scanned))
-			oldest = target;
-	}
-
-	/* If we didn't find a match, then get a new network slot to initialize
-	 * with this beacon's information */
-	if (&target->list == &ieee->network_list) {
-		if (list_empty(&ieee->network_free_list)) {
-			/* If there are no more slots, expire the oldest */
-			list_del(&oldest->list);
-			target = oldest;
-			IEEE80211_DEBUG_SCAN("Expired '%s' (%pM) from "
-					     "network list.\n",
-					     escape_essid(target->ssid,
-							  target->ssid_len),
-					     target->bssid);
-		} else {
-			/* Otherwise just pull from the free list */
-			target = list_entry(ieee->network_free_list.next,
-					    struct ieee80211_network, list);
-			list_del(ieee->network_free_list.next);
-		}
-
-
-#ifdef CONFIG_IEEE80211_DEBUG
-		IEEE80211_DEBUG_SCAN("Adding '%s' (%pM) via %s.\n",
-				     escape_essid(network.ssid,
-						  network.ssid_len),
-				     network.bssid,
-				     WLAN_FC_GET_STYPE(beacon->header.frame_ctl) ==
-				     IEEE80211_STYPE_PROBE_RESP ?
-				     "PROBE RESPONSE" : "BEACON");
-#endif
-
-		memcpy(target, &network, sizeof(*target));
-		list_add_tail(&target->list, &ieee->network_list);
-	} else {
-		IEEE80211_DEBUG_SCAN("Updating '%s' (%pM) via %s.\n",
-				     escape_essid(target->ssid,
-						  target->ssid_len),
-				     target->bssid,
-				     WLAN_FC_GET_STYPE(beacon->header.frame_ctl) ==
-				     IEEE80211_STYPE_PROBE_RESP ?
-				     "PROBE RESPONSE" : "BEACON");
-
-		/* we have an entry and we are going to update it. But this entry may
-		 * be already expired. In this case we do the same as we found a new
-		 * net and call the new_net handler
-		 */
-		renew = !time_after(target->last_scanned + ieee->scan_age, jiffies);
-		//YJ,add,080819,for hidden ap
-		if (is_beacon == 0)
-			network.flags = (~NETWORK_EMPTY_ESSID & network.flags)|(NETWORK_EMPTY_ESSID & target->flags);
-		//if(strncmp(network.ssid, "linksys-c",9) == 0)
-		//	printk("====>2 network.ssid=%s FLAG=%d target.ssid=%s FLAG=%d\n", network.ssid, network.flags, target->ssid, target->flags);
-		if (((network.flags & NETWORK_EMPTY_ESSID) == NETWORK_EMPTY_ESSID) \
-		    && (((network.ssid_len > 0) && (strncmp(target->ssid, network.ssid, network.ssid_len)))\
-		    || ((ieee->current_network.ssid_len == network.ssid_len) && (strncmp(ieee->current_network.ssid, network.ssid, network.ssid_len) == 0) && (ieee->state == IEEE80211_NOLINK))))
-			renew = 1;
-		//YJ,add,080819,for hidden ap,end
-		update_network(target, &network);
-	}
-
-	spin_unlock_irqrestore(&ieee->lock, flags);
-}
-
-void ieee80211_rx_mgt(struct ieee80211_device *ieee,
-		      struct ieee80211_hdr_4addr *header,
-		      struct ieee80211_rx_stats *stats)
-{
-	switch (WLAN_FC_GET_STYPE(header->frame_ctl)) {
-
-	case IEEE80211_STYPE_BEACON:
-		IEEE80211_DEBUG_MGMT("received BEACON (%d)\n",
-				     WLAN_FC_GET_STYPE(header->frame_ctl));
-		IEEE80211_DEBUG_SCAN("Beacon\n");
-		ieee80211_process_probe_response(
-			ieee, (struct ieee80211_probe_response *)header, stats);
-		break;
-
-	case IEEE80211_STYPE_PROBE_RESP:
-		IEEE80211_DEBUG_MGMT("received PROBE RESPONSE (%d)\n",
-				     WLAN_FC_GET_STYPE(header->frame_ctl));
-		IEEE80211_DEBUG_SCAN("Probe response\n");
-		ieee80211_process_probe_response(
-			ieee, (struct ieee80211_probe_response *)header, stats);
-		break;
-	}
-}
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
deleted file mode 100644
index 03eb164798cd..000000000000
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
+++ /dev/null
@@ -1,2711 +0,0 @@
-/* IEEE 802.11 SoftMAC layer
- * Copyright (c) 2005 Andrea Merello <andrea.merello@gmail.com>
- *
- * Mostly extracted from the rtl8180-sa2400 driver for the
- * in-kernel generic ieee802.11 stack.
- *
- * Few lines might be stolen from other part of the ieee80211
- * stack. Copyright who own it's copyright
- *
- * WPA code stolen from the ipw2200 driver.
- * Copyright who own it's copyright.
- *
- * released under the GPL
- */
-
-#include "ieee80211.h"
-
-#include <linux/random.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/uaccess.h>
-#include <linux/etherdevice.h>
-
-#include "dot11d.h"
-
-short ieee80211_is_54g(const struct ieee80211_network *net)
-{
-	return (net->rates_ex_len > 0) || (net->rates_len > 4);
-}
-
-short ieee80211_is_shortslot(const struct ieee80211_network *net)
-{
-	return net->capability & WLAN_CAPABILITY_SHORT_SLOT;
-}
-
-/* returns the total length needed for placing the RATE MFIE
- * tag and the EXTENDED RATE MFIE tag if needed.
- * It encludes two bytes per tag for the tag itself and its len
- */
-static unsigned int ieee80211_MFIE_rate_len(struct ieee80211_device *ieee)
-{
-	unsigned int rate_len = 0;
-
-	if (ieee->modulation & IEEE80211_CCK_MODULATION)
-		rate_len = IEEE80211_CCK_RATE_LEN + 2;
-
-	if (ieee->modulation & IEEE80211_OFDM_MODULATION)
-
-		rate_len += IEEE80211_OFDM_RATE_LEN + 2;
-
-	return rate_len;
-}
-
-/* place the MFIE rate, tag to the memory (double) poised.
- * Then it updates the pointer so that it points after the new MFIE tag added.
- */
-static void ieee80211_MFIE_Brate(struct ieee80211_device *ieee, u8 **tag_p)
-{
-	u8 *tag = *tag_p;
-
-	if (ieee->modulation & IEEE80211_CCK_MODULATION) {
-		*tag++ = MFIE_TYPE_RATES;
-		*tag++ = 4;
-		*tag++ = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_1MB;
-		*tag++ = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_2MB;
-		*tag++ = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_5MB;
-		*tag++ = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_11MB;
-	}
-
-	/* We may add an option for custom rates that specific HW might support */
-	*tag_p = tag;
-}
-
-static void ieee80211_MFIE_Grate(struct ieee80211_device *ieee, u8 **tag_p)
-{
-	u8 *tag = *tag_p;
-
-		if (ieee->modulation & IEEE80211_OFDM_MODULATION) {
-		*tag++ = MFIE_TYPE_RATES_EX;
-		*tag++ = 8;
-		*tag++ = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_6MB;
-		*tag++ = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_9MB;
-		*tag++ = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_12MB;
-		*tag++ = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_18MB;
-		*tag++ = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_24MB;
-		*tag++ = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_36MB;
-		*tag++ = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_48MB;
-		*tag++ = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_54MB;
-
-	}
-	/* We may add an option for custom rates that specific HW might support */
-	*tag_p = tag;
-}
-
-static void ieee80211_WMM_Info(struct ieee80211_device *ieee, u8 **tag_p)
-{
-	u8 *tag = *tag_p;
-
-	*tag++ = MFIE_TYPE_GENERIC; /* 0 */
-	*tag++ = 7;
-	*tag++ = 0x00;
-	*tag++ = 0x50;
-	*tag++ = 0xf2;
-	*tag++ = 0x02; /* 5 */
-	*tag++ = 0x00;
-	*tag++ = 0x01;
-#ifdef SUPPORT_USPD
-	if (ieee->current_network.wmm_info & 0x80)
-		*tag++ = 0x0f|MAX_SP_Len;
-	else
-		*tag++ = MAX_SP_Len;
-#else
-	*tag++ = MAX_SP_Len;
-#endif
-	*tag_p = tag;
-}
-
-static void ieee80211_TURBO_Info(struct ieee80211_device *ieee, u8 **tag_p)
-{
-	u8 *tag = *tag_p;
-	*tag++ = MFIE_TYPE_GENERIC; /* 0 */
-	*tag++ = 7;
-	*tag++ = 0x00;
-	*tag++ = 0xe0;
-	*tag++ = 0x4c;
-	*tag++ = 0x01; /* 5 */
-	*tag++ = 0x02;
-	*tag++ = 0x11;
-	*tag++ = 0x00;
-	*tag_p = tag;
-	printk(KERN_ALERT "This is enable turbo mode IE process\n");
-}
-
-static void enqueue_mgmt(struct ieee80211_device *ieee, struct sk_buff *skb)
-{
-	int nh;
-	nh = (ieee->mgmt_queue_head + 1) % MGMT_QUEUE_NUM;
-
-	ieee->mgmt_queue_head = nh;
-	ieee->mgmt_queue_ring[nh] = skb;
-}
-
-static struct sk_buff *dequeue_mgmt(struct ieee80211_device *ieee)
-{
-	struct sk_buff *ret;
-
-	if (ieee->mgmt_queue_tail == ieee->mgmt_queue_head)
-		return NULL;
-
-	ret = ieee->mgmt_queue_ring[ieee->mgmt_queue_tail];
-
-	ieee->mgmt_queue_tail =
-		(ieee->mgmt_queue_tail + 1) % MGMT_QUEUE_NUM;
-
-	return ret;
-}
-
-static void init_mgmt_queue(struct ieee80211_device *ieee)
-{
-	ieee->mgmt_queue_tail = ieee->mgmt_queue_head = 0;
-}
-
-void ieee80211_sta_wakeup(struct ieee80211_device *ieee, short nl);
-
-inline void softmac_mgmt_xmit(struct sk_buff *skb,
-			      struct ieee80211_device *ieee)
-{
-	unsigned long flags;
-	short single = ieee->softmac_features & IEEE_SOFTMAC_SINGLE_QUEUE;
-	struct ieee80211_hdr_3addr  *header =
-		(struct ieee80211_hdr_3addr  *) skb->data;
-
-	spin_lock_irqsave(&ieee->lock, flags);
-
-	/* called with 2nd param 0, no mgmt lock required */
-	ieee80211_sta_wakeup(ieee, 0);
-
-	if (single) {
-		if (ieee->queue_stop) {
-			enqueue_mgmt(ieee, skb);
-		} else {
-			header->seq_ctrl = cpu_to_le16(ieee->seq_ctrl[0]<<4);
-
-			if (ieee->seq_ctrl[0] == 0xFFF)
-				ieee->seq_ctrl[0] = 0;
-			else
-				ieee->seq_ctrl[0]++;
-
-			/* avoid watchdog triggers */
-			ieee->dev->trans_start = jiffies;
-			ieee->softmac_data_hard_start_xmit(skb, ieee->dev, ieee->basic_rate);
-		}
-
-		spin_unlock_irqrestore(&ieee->lock, flags);
-	} else {
-		spin_unlock_irqrestore(&ieee->lock, flags);
-		spin_lock_irqsave(&ieee->mgmt_tx_lock, flags);
-
-		header->seq_ctrl = cpu_to_le16(ieee->seq_ctrl[0] << 4);
-
-		if (ieee->seq_ctrl[0] == 0xFFF)
-			ieee->seq_ctrl[0] = 0;
-		else
-			ieee->seq_ctrl[0]++;
-
-		/* avoid watchdog triggers */
-		ieee->dev->trans_start = jiffies;
-		ieee->softmac_hard_start_xmit(skb, ieee->dev);
-
-		spin_unlock_irqrestore(&ieee->mgmt_tx_lock, flags);
-	}
-}
-
-inline void softmac_ps_mgmt_xmit(struct sk_buff *skb,
-				 struct ieee80211_device *ieee)
-{
-	short single = ieee->softmac_features & IEEE_SOFTMAC_SINGLE_QUEUE;
-	struct ieee80211_hdr_3addr  *header =
-		(struct ieee80211_hdr_3addr  *) skb->data;
-
-	if (single) {
-		header->seq_ctrl = cpu_to_le16(ieee->seq_ctrl[0] << 4);
-
-		if (ieee->seq_ctrl[0] == 0xFFF)
-			ieee->seq_ctrl[0] = 0;
-		else
-			ieee->seq_ctrl[0]++;
-
-		/* avoid watchdog triggers */
-		ieee->dev->trans_start = jiffies;
-		ieee->softmac_data_hard_start_xmit(skb, ieee->dev, ieee->basic_rate);
-	} else {
-		header->seq_ctrl = cpu_to_le16(ieee->seq_ctrl[0] << 4);
-
-		if (ieee->seq_ctrl[0] == 0xFFF)
-			ieee->seq_ctrl[0] = 0;
-		else
-			ieee->seq_ctrl[0]++;
-
-		/* avoid watchdog triggers */
-		ieee->dev->trans_start = jiffies;
-		ieee->softmac_hard_start_xmit(skb, ieee->dev);
-	}
-}
-
-inline struct sk_buff *
-ieee80211_disassociate_skb(struct ieee80211_network *beacon,
-			   struct ieee80211_device *ieee, u8 asRsn)
-{
-	struct sk_buff *skb;
-	struct ieee80211_disassoc_frame *disass;
-
-	skb = dev_alloc_skb(sizeof(struct ieee80211_disassoc_frame));
-	if (!skb)
-		return NULL;
-
-	disass = (struct ieee80211_disassoc_frame *) skb_put(skb, sizeof(struct ieee80211_disassoc_frame));
-	disass->header.frame_control = cpu_to_le16(IEEE80211_STYPE_DISASSOC);
-	disass->header.duration_id = 0;
-
-	memcpy(disass->header.addr1, beacon->bssid, ETH_ALEN);
-	memcpy(disass->header.addr2, ieee->dev->dev_addr, ETH_ALEN);
-	memcpy(disass->header.addr3, beacon->bssid, ETH_ALEN);
-
-	disass->reasoncode = asRsn;
-	return skb;
-}
-
-void SendDisassociation(struct ieee80211_device *ieee, u8 *asSta, u8 asRsn)
-{
-	struct ieee80211_network *beacon = &ieee->current_network;
-	struct sk_buff *skb;
-	skb = ieee80211_disassociate_skb(beacon, ieee, asRsn);
-	if (skb)
-		softmac_mgmt_xmit(skb, ieee);
-}
-
-inline struct sk_buff *ieee80211_probe_req(struct ieee80211_device *ieee)
-{
-	unsigned int len, rate_len;
-	u8 *tag;
-	struct sk_buff *skb;
-	struct ieee80211_probe_request *req;
-
-	len = ieee->current_network.ssid_len;
-
-	rate_len = ieee80211_MFIE_rate_len(ieee);
-
-	skb = dev_alloc_skb(sizeof(struct ieee80211_probe_request) +
-			    2 + len + rate_len);
-	if (!skb)
-		return NULL;
-
-	req = (struct ieee80211_probe_request *) skb_put(skb, sizeof(struct ieee80211_probe_request));
-	req->header.frame_ctl = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ);
-	req->header.duration_id = 0; /* FIXME: is this OK ? */
-
-	memset(req->header.addr1, 0xff, ETH_ALEN);
-	memcpy(req->header.addr2, ieee->dev->dev_addr, ETH_ALEN);
-	memset(req->header.addr3, 0xff, ETH_ALEN);
-
-	tag = (u8 *) skb_put(skb, len + 2 + rate_len);
-
-	*tag++ = MFIE_TYPE_SSID;
-	*tag++ = len;
-	memcpy(tag, ieee->current_network.ssid, len);
-	tag += len;
-	ieee80211_MFIE_Brate(ieee, &tag);
-	ieee80211_MFIE_Grate(ieee, &tag);
-
-	return skb;
-}
-
-struct sk_buff *ieee80211_get_beacon_(struct ieee80211_device *ieee);
-
-static void ieee80211_send_beacon(struct ieee80211_device *ieee)
-{
-	struct sk_buff *skb;
-
-	skb = ieee80211_get_beacon_(ieee);
-
-	if (skb) {
-		softmac_mgmt_xmit(skb, ieee);
-		ieee->softmac_stats.tx_beacons++;
-		dev_kfree_skb_any(skb);
-	}
-
-	ieee->beacon_timer.expires = jiffies +
-		(MSECS(ieee->current_network.beacon_interval - 5));
-
-	if (ieee->beacon_txing)
-		add_timer(&ieee->beacon_timer);
-}
-
-
-static void ieee80211_send_beacon_cb(unsigned long _ieee)
-{
-	struct ieee80211_device *ieee =
-		(struct ieee80211_device *) _ieee;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ieee->beacon_lock, flags);
-	ieee80211_send_beacon(ieee);
-	spin_unlock_irqrestore(&ieee->beacon_lock, flags);
-}
-
-static void ieee80211_send_probe(struct ieee80211_device *ieee)
-{
-	struct sk_buff *skb;
-
-	skb = ieee80211_probe_req(ieee);
-	if (skb) {
-		softmac_mgmt_xmit(skb, ieee);
-		ieee->softmac_stats.tx_probe_rq++;
-	}
-}
-
-static void ieee80211_send_probe_requests(struct ieee80211_device *ieee)
-{
-	if (ieee->active_scan && (ieee->softmac_features & IEEE_SOFTMAC_PROBERQ)) {
-		ieee80211_send_probe(ieee);
-		ieee80211_send_probe(ieee);
-	}
-}
-
-/* this performs syncro scan blocking the caller until all channels
- * in the allowed channel map has been checked.
- */
-static void ieee80211_softmac_scan_syncro(struct ieee80211_device *ieee)
-{
-	short ch = 0;
-	u8 channel_map[MAX_CHANNEL_NUMBER+1];
-	memcpy(channel_map, GET_DOT11D_INFO(ieee)->channel_map, MAX_CHANNEL_NUMBER+1);
-	down(&ieee->scan_sem);
-
-	while (1) {
-		do {
-			ch++;
-			if (ch > MAX_CHANNEL_NUMBER)
-				goto out; /* scan completed */
-
-		} while (!channel_map[ch]);
-		/* this function can be called in two situations
-		 * 1- We have switched to ad-hoc mode and we are
-		 *    performing a complete syncro scan before conclude
-		 *    there are no interesting cell and to create a
-		 *    new one. In this case the link state is
-		 *    IEEE80211_NOLINK until we found an interesting cell.
-		 *    If so the ieee8021_new_net, called by the RX path
-		 *    will set the state to IEEE80211_LINKED, so we stop
-		 *    scanning
-		 * 2- We are linked and the root uses run iwlist scan.
-		 *    So we switch to IEEE80211_LINKED_SCANNING to remember
-		 *    that we are still logically linked (not interested in
-		 *    new network events, despite for updating the net list,
-		 *    but we are temporarily 'unlinked' as the driver shall
-		 *    not filter RX frames and the channel is changing.
-		 * So the only situation in witch are interested is to check
-		 * if the state become LINKED because of the #1 situation
-		 */
-
-		if (ieee->state == IEEE80211_LINKED)
-			goto out;
-
-		ieee->set_chan(ieee->dev, ch);
-		if (channel_map[ch] == 1)
-			ieee80211_send_probe_requests(ieee);
-
-		/* this prevent excessive time wait when we
-		 * need to wait for a syncro scan to end..
-		 */
-		if (ieee->sync_scan_hurryup)
-			goto out;
-
-		msleep_interruptible_rtl(IEEE80211_SOFTMAC_SCAN_TIME);
-	}
-out:
-	ieee->sync_scan_hurryup = 0;
-	up(&ieee->scan_sem);
-	if (IS_DOT11D_ENABLE(ieee))
-		DOT11D_ScanComplete(ieee);
-}
-
-void ieee80211_softmac_ips_scan_syncro(struct ieee80211_device *ieee)
-{
-	int ch;
-	unsigned int watch_dog = 0;
-	u8 channel_map[MAX_CHANNEL_NUMBER+1];
-	memcpy(channel_map, GET_DOT11D_INFO(ieee)->channel_map, MAX_CHANNEL_NUMBER+1);
-	down(&ieee->scan_sem);
-	ch = ieee->current_network.channel;
-
-	while (1) {
-		/* this function can be called in two situations
-		 * 1- We have switched to ad-hoc mode and we are
-		 *    performing a complete syncro scan before conclude
-		 *    there are no interesting cell and to create a
-		 *    new one. In this case the link state is
-		 *    IEEE80211_NOLINK until we found an interesting cell.
-		 *    If so the ieee8021_new_net, called by the RX path
-		 *    will set the state to IEEE80211_LINKED, so we stop
-		 *    scanning
-		 * 2- We are linked and the root uses run iwlist scan.
-		 *    So we switch to IEEE80211_LINKED_SCANNING to remember
-		 *    that we are still logically linked (not interested in
-		 *    new network events, despite for updating the net list,
-		 *    but we are temporarily 'unlinked' as the driver shall
-		 *    not filter RX frames and the channel is changing.
-		 * So the only situation in witch are interested is to check
-		 * if the state become LINKED because of the #1 situation
-		 */
-		if (ieee->state == IEEE80211_LINKED)
-			goto out;
-
-		if (channel_map[ieee->current_network.channel] > 0)
-			ieee->set_chan(ieee->dev, ieee->current_network.channel);
-
-		if (channel_map[ieee->current_network.channel] == 1)
-			ieee80211_send_probe_requests(ieee);
-
-		msleep_interruptible_rtl(IEEE80211_SOFTMAC_SCAN_TIME);
-
-		do {
-			if (watch_dog++ >= MAX_CHANNEL_NUMBER)
-				goto out; /* scan completed */
-
-			ieee->current_network.channel = (ieee->current_network.channel + 1)%MAX_CHANNEL_NUMBER;
-		} while (!channel_map[ieee->current_network.channel]);
-	}
-out:
-	ieee->actscanning = false;
-	up(&ieee->scan_sem);
-	if (IS_DOT11D_ENABLE(ieee))
-		DOT11D_ScanComplete(ieee);
-}
-
-static void ieee80211_softmac_scan_wq(struct work_struct *work)
-{
-	struct delayed_work *dwork = to_delayed_work(work);
-	struct ieee80211_device *ieee = container_of(dwork, struct ieee80211_device, softmac_scan_wq);
-	static short watchdog;
-	u8 channel_map[MAX_CHANNEL_NUMBER+1];
-	memcpy(channel_map, GET_DOT11D_INFO(ieee)->channel_map, MAX_CHANNEL_NUMBER+1);
-	down(&ieee->scan_sem);
-
-	do {
-		ieee->current_network.channel =
-			(ieee->current_network.channel + 1) % MAX_CHANNEL_NUMBER;
-		if (watchdog++ > MAX_CHANNEL_NUMBER)
-				goto out; /* no good chans */
-	} while (!channel_map[ieee->current_network.channel]);
-
-	if (ieee->scanning == 0) {
-		printk("error out, scanning = 0\n");
-		goto out;
-	}
-	ieee->set_chan(ieee->dev, ieee->current_network.channel);
-	if (channel_map[ieee->current_network.channel] == 1)
-		ieee80211_send_probe_requests(ieee);
-
-	queue_delayed_work(ieee->wq, &ieee->softmac_scan_wq, IEEE80211_SOFTMAC_SCAN_TIME);
-	up(&ieee->scan_sem);
-	return;
-out:
-	ieee->actscanning = false;
-	watchdog = 0;
-	ieee->scanning = 0;
-	up(&ieee->scan_sem);
-
-	if (IS_DOT11D_ENABLE(ieee))
-		DOT11D_ScanComplete(ieee);
-	return;
-}
-
-static void ieee80211_beacons_start(struct ieee80211_device *ieee)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&ieee->beacon_lock, flags);
-
-	ieee->beacon_txing = 1;
-	ieee80211_send_beacon(ieee);
-
-	spin_unlock_irqrestore(&ieee->beacon_lock, flags);
-}
-
-static void ieee80211_beacons_stop(struct ieee80211_device *ieee)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&ieee->beacon_lock, flags);
-
-	ieee->beacon_txing = 0;
-	del_timer_sync(&ieee->beacon_timer);
-
-	spin_unlock_irqrestore(&ieee->beacon_lock, flags);
-}
-
-void ieee80211_stop_send_beacons(struct ieee80211_device *ieee)
-{
-	if (ieee->stop_send_beacons)
-		ieee->stop_send_beacons(ieee->dev);
-	if (ieee->softmac_features & IEEE_SOFTMAC_BEACONS)
-		ieee80211_beacons_stop(ieee);
-}
-
-void ieee80211_start_send_beacons(struct ieee80211_device *ieee)
-{
-	if (ieee->start_send_beacons)
-		ieee->start_send_beacons(ieee->dev);
-	if (ieee->softmac_features & IEEE_SOFTMAC_BEACONS)
-		ieee80211_beacons_start(ieee);
-}
-
-static void ieee80211_softmac_stop_scan(struct ieee80211_device *ieee)
-{
-	down(&ieee->scan_sem);
-
-	if (ieee->scanning == 1) {
-		ieee->scanning = 0;
-		cancel_delayed_work(&ieee->softmac_scan_wq);
-	}
-
-	up(&ieee->scan_sem);
-}
-
-void ieee80211_stop_scan(struct ieee80211_device *ieee)
-{
-	if (ieee->softmac_features & IEEE_SOFTMAC_SCAN)
-		ieee80211_softmac_stop_scan(ieee);
-	else
-		ieee->stop_scan(ieee->dev);
-}
-
-/* called with ieee->lock held */
-void ieee80211_rtl_start_scan(struct ieee80211_device *ieee)
-{
-	if (IS_DOT11D_ENABLE(ieee)) {
-		if (IS_COUNTRY_IE_VALID(ieee))
-			RESET_CIE_WATCHDOG(ieee);
-	}
-
-	if (ieee->softmac_features & IEEE_SOFTMAC_SCAN) {
-		if (ieee->scanning == 0) {
-			ieee->scanning = 1;
-#if 1
-			queue_delayed_work(ieee->wq, &ieee->softmac_scan_wq, 0);
-#endif
-		}
-	}else
-		ieee->start_scan(ieee->dev);
-}
-
-/* called with wx_sem held */
-void ieee80211_start_scan_syncro(struct ieee80211_device *ieee)
-{
-	if (IS_DOT11D_ENABLE(ieee)) {
-		if (IS_COUNTRY_IE_VALID(ieee))
-			RESET_CIE_WATCHDOG(ieee);
-	}
-	ieee->sync_scan_hurryup = 0;
-
-	if (ieee->softmac_features & IEEE_SOFTMAC_SCAN)
-		ieee80211_softmac_scan_syncro(ieee);
-	else
-		ieee->scan_syncro(ieee->dev);
-}
-
-inline struct sk_buff *
-ieee80211_authentication_req(struct ieee80211_network *beacon,
-			     struct ieee80211_device *ieee, int challengelen)
-{
-	struct sk_buff *skb;
-	struct ieee80211_authentication *auth;
-
-	skb = dev_alloc_skb(sizeof(struct ieee80211_authentication) + challengelen);
-
-	if (!skb)
-		return NULL;
-
-	auth = (struct ieee80211_authentication *)
-		skb_put(skb, sizeof(struct ieee80211_authentication));
-
-	auth->header.frame_ctl = IEEE80211_STYPE_AUTH;
-	if (challengelen)
-		auth->header.frame_ctl |= IEEE80211_FCTL_WEP;
-
-	auth->header.duration_id = 0x013a; /* FIXME */
-
-	memcpy(auth->header.addr1, beacon->bssid, ETH_ALEN);
-	memcpy(auth->header.addr2, ieee->dev->dev_addr, ETH_ALEN);
-	memcpy(auth->header.addr3, beacon->bssid, ETH_ALEN);
-
-	auth->algorithm = ieee->open_wep ? WLAN_AUTH_OPEN : WLAN_AUTH_SHARED_KEY;
-
-	auth->transaction = cpu_to_le16(ieee->associate_seq);
-	ieee->associate_seq++;
-
-	auth->status = cpu_to_le16(WLAN_STATUS_SUCCESS);
-
-	return skb;
-}
-
-static struct sk_buff *ieee80211_probe_resp(struct ieee80211_device *ieee,
-					    u8 *dest)
-{
-	u8 *tag;
-	int beacon_size;
-	struct ieee80211_probe_response *beacon_buf;
-	struct sk_buff *skb;
-	int encrypt;
-	int atim_len, erp_len;
-	struct ieee80211_crypt_data *crypt;
-
-	char *ssid = ieee->current_network.ssid;
-	int ssid_len = ieee->current_network.ssid_len;
-	int rate_len = ieee->current_network.rates_len+2;
-	int rate_ex_len = ieee->current_network.rates_ex_len;
-	int wpa_ie_len = ieee->wpa_ie_len;
-	if (rate_ex_len > 0)
-		rate_ex_len += 2;
-
-	if (ieee->current_network.capability & WLAN_CAPABILITY_IBSS)
-		atim_len = 4;
-	else
-		atim_len = 0;
-
-	if (ieee80211_is_54g(&ieee->current_network))
-		erp_len = 3;
-	else
-		erp_len = 0;
-
-	beacon_size = sizeof(struct ieee80211_probe_response)+
-		ssid_len
-		+3 /* channel */
-		+rate_len
-		+rate_ex_len
-		+atim_len
-		+wpa_ie_len
-		+erp_len;
-
-	skb = dev_alloc_skb(beacon_size);
-
-	if (!skb)
-		return NULL;
-
-	beacon_buf = (struct ieee80211_probe_response *) skb_put(skb, beacon_size);
-
-	memcpy(beacon_buf->header.addr1, dest, ETH_ALEN);
-	memcpy(beacon_buf->header.addr2, ieee->dev->dev_addr, ETH_ALEN);
-	memcpy(beacon_buf->header.addr3, ieee->current_network.bssid, ETH_ALEN);
-
-	beacon_buf->header.duration_id = 0; /* FIXME */
-	beacon_buf->beacon_interval =
-		cpu_to_le16(ieee->current_network.beacon_interval);
-	beacon_buf->capability =
-		cpu_to_le16(ieee->current_network.capability & WLAN_CAPABILITY_IBSS);
-
-	if (ieee->short_slot && (ieee->current_network.capability & WLAN_CAPABILITY_SHORT_SLOT))
-		beacon_buf->capability |= cpu_to_le16(WLAN_CAPABILITY_SHORT_SLOT);
-
-	crypt = ieee->crypt[ieee->tx_keyidx];
-
-	encrypt = ieee->host_encrypt && crypt && crypt->ops &&
-		((0 == strcmp(crypt->ops->name, "WEP")) || wpa_ie_len);
-
-	if (encrypt)
-		beacon_buf->capability |= cpu_to_le16(WLAN_CAPABILITY_PRIVACY);
-
-
-	beacon_buf->header.frame_ctl = cpu_to_le16(IEEE80211_STYPE_PROBE_RESP);
-
-	beacon_buf->info_element.id = MFIE_TYPE_SSID;
-	beacon_buf->info_element.len = ssid_len;
-
-	tag = (u8 *) beacon_buf->info_element.data;
-
-	memcpy(tag, ssid, ssid_len);
-
-	tag += ssid_len;
-
-	*(tag++) = MFIE_TYPE_RATES;
-	*(tag++) = rate_len - 2;
-	memcpy(tag, ieee->current_network.rates, rate_len-2);
-	tag += rate_len - 2;
-
-	*(tag++) = MFIE_TYPE_DS_SET;
-	*(tag++) = 1;
-	*(tag++) = ieee->current_network.channel;
-
-	if (atim_len) {
-		*(tag++) = MFIE_TYPE_IBSS_SET;
-		*(tag++) = 2;
-		*((u16 *)(tag)) = cpu_to_le16(ieee->current_network.atim_window);
-		tag += 2;
-	}
-
-	if (erp_len) {
-		*(tag++) = MFIE_TYPE_ERP;
-		*(tag++) = 1;
-		*(tag++) = 0;
-	}
-
-	if (rate_ex_len) {
-		*(tag++) = MFIE_TYPE_RATES_EX;
-		*(tag++) = rate_ex_len-2;
-		memcpy(tag, ieee->current_network.rates_ex, rate_ex_len-2);
-		tag += rate_ex_len - 2;
-	}
-
-	if (wpa_ie_len)	{
-		if (ieee->iw_mode == IW_MODE_ADHOC) {
-			/* as Windows will set pairwise key same as the group
-			 * key which is not allowed in Linux, so set this for
-			 * IOT issue.
-			 */
-			memcpy(&ieee->wpa_ie[14], &ieee->wpa_ie[8], 4);
-		}
-
-		memcpy(tag, ieee->wpa_ie, ieee->wpa_ie_len);
-	}
-	skb->dev = ieee->dev;
-	return skb;
-}
-
-static struct sk_buff *ieee80211_assoc_resp(struct ieee80211_device *ieee,
-					    u8 *dest)
-{
-	struct sk_buff *skb;
-	u8 *tag;
-
-	struct ieee80211_crypt_data *crypt;
-	struct ieee80211_assoc_response_frame *assoc;
-	short encrypt;
-
-	unsigned int rate_len = ieee80211_MFIE_rate_len(ieee);
-	int len = sizeof(struct ieee80211_assoc_response_frame) + rate_len;
-
-	skb = dev_alloc_skb(len);
-
-	if (!skb)
-		return NULL;
-
-	assoc = (struct ieee80211_assoc_response_frame *)
-		skb_put(skb, sizeof(struct ieee80211_assoc_response_frame));
-
-	assoc->header.frame_control = cpu_to_le16(IEEE80211_STYPE_ASSOC_RESP);
-	memcpy(assoc->header.addr1, dest, ETH_ALEN);
-	memcpy(assoc->header.addr3, ieee->dev->dev_addr, ETH_ALEN);
-	memcpy(assoc->header.addr2, ieee->dev->dev_addr, ETH_ALEN);
-	assoc->capability = cpu_to_le16(ieee->iw_mode == IW_MODE_MASTER ?
-		WLAN_CAPABILITY_BSS : WLAN_CAPABILITY_IBSS);
-
-	if (ieee->short_slot)
-		assoc->capability |= cpu_to_le16(WLAN_CAPABILITY_SHORT_SLOT);
-
-	if (ieee->host_encrypt)
-		crypt = ieee->crypt[ieee->tx_keyidx];
-	else
-		crypt = NULL;
-
-	encrypt = (crypt && crypt->ops);
-
-	if (encrypt)
-		assoc->capability |= cpu_to_le16(WLAN_CAPABILITY_PRIVACY);
-
-	assoc->status = 0;
-	assoc->aid = cpu_to_le16(ieee->assoc_id);
-	if (ieee->assoc_id == 0x2007)
-		ieee->assoc_id = 0;
-	else
-		ieee->assoc_id++;
-
-	tag = (u8 *) skb_put(skb, rate_len);
-
-	ieee80211_MFIE_Brate(ieee, &tag);
-	ieee80211_MFIE_Grate(ieee, &tag);
-
-	return skb;
-}
-
-static struct sk_buff *ieee80211_auth_resp(struct ieee80211_device *ieee,
-					   int status, u8 *dest)
-{
-	struct sk_buff *skb;
-	struct ieee80211_authentication *auth;
-
-	skb = dev_alloc_skb(sizeof(struct ieee80211_authentication)+1);
-
-	if (!skb)
-		return NULL;
-
-	skb->len = sizeof(struct ieee80211_authentication);
-
-	auth = (struct ieee80211_authentication *)skb->data;
-
-	auth->status = cpu_to_le16(status);
-	auth->transaction = cpu_to_le16(2);
-	auth->algorithm = cpu_to_le16(WLAN_AUTH_OPEN);
-
-	memcpy(auth->header.addr3, ieee->dev->dev_addr, ETH_ALEN);
-	memcpy(auth->header.addr2, ieee->dev->dev_addr, ETH_ALEN);
-	memcpy(auth->header.addr1, dest, ETH_ALEN);
-	auth->header.frame_ctl = cpu_to_le16(IEEE80211_STYPE_AUTH);
-	return skb;
-}
-
-static struct sk_buff *ieee80211_null_func(struct ieee80211_device *ieee, short pwr)
-{
-	struct sk_buff *skb;
-	struct ieee80211_hdr_3addr *hdr;
-
-	skb = dev_alloc_skb(sizeof(struct ieee80211_hdr_3addr));
-
-	if (!skb)
-		return NULL;
-
-	hdr = (struct ieee80211_hdr_3addr *)skb_put(skb, sizeof(struct ieee80211_hdr_3addr));
-
-	memcpy(hdr->addr1, ieee->current_network.bssid, ETH_ALEN);
-	memcpy(hdr->addr2, ieee->dev->dev_addr, ETH_ALEN);
-	memcpy(hdr->addr3, ieee->current_network.bssid, ETH_ALEN);
-
-	hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_DATA |
-		IEEE80211_STYPE_NULLFUNC | IEEE80211_FCTL_TODS |
-		(pwr ? IEEE80211_FCTL_PM:0));
-
-	return skb;
-}
-
-static void ieee80211_resp_to_assoc_rq(struct ieee80211_device *ieee, u8 *dest)
-{
-	struct sk_buff *buf = ieee80211_assoc_resp(ieee, dest);
-
-	if (buf) {
-		softmac_mgmt_xmit(buf, ieee);
-		dev_kfree_skb_any(buf);
-	}
-}
-
-static void ieee80211_resp_to_auth(struct ieee80211_device *ieee, int s, u8 *dest)
-{
-	struct sk_buff *buf = ieee80211_auth_resp(ieee, s, dest);
-
-	if (buf) {
-		softmac_mgmt_xmit(buf, ieee);
-		dev_kfree_skb_any(buf);
-	}
-}
-
-static void ieee80211_resp_to_probe(struct ieee80211_device *ieee, u8 *dest)
-{
-	struct sk_buff *buf = ieee80211_probe_resp(ieee, dest);
-
-	if (buf) {
-		softmac_mgmt_xmit(buf, ieee);
-		dev_kfree_skb_any(buf);
-	}
-}
-
-inline struct sk_buff *
-ieee80211_association_req(struct ieee80211_network *beacon,
-			  struct ieee80211_device *ieee)
-{
-	struct sk_buff *skb;
-
-	struct ieee80211_assoc_request_frame *hdr;
-	u8 *tag;
-	unsigned int wpa_len = beacon->wpa_ie_len;
-#if 1
-	/* for testing purpose */
-	unsigned int rsn_len = beacon->rsn_ie_len;
-#endif
-	unsigned int rate_len = ieee80211_MFIE_rate_len(ieee);
-	unsigned int wmm_info_len = beacon->QoS_Enable?9:0;
-	unsigned int turbo_info_len = beacon->Turbo_Enable?9:0;
-
-	u8  encry_proto = ieee->wpax_type_notify & 0xff;
-
-	int len = 0;
-
-	/* [0] Notify type of encryption: WPA/WPA2
-	 * [1] pair wise type
-	 * [2] authen type
-	 */
-	if (ieee->wpax_type_set) {
-		if (IEEE_PROTO_WPA == encry_proto) {
-			rsn_len = 0;
-		} else if (IEEE_PROTO_RSN == encry_proto) {
-			wpa_len = 0;
-		}
-	}
-	len = sizeof(struct ieee80211_assoc_request_frame)+
-		+ beacon->ssid_len /* essid tagged val */
-		+ rate_len /* rates tagged val */
-		+ wpa_len
-		+ rsn_len
-		+ wmm_info_len
-		+ turbo_info_len;
-
-	skb = dev_alloc_skb(len);
-
-	if (!skb)
-		return NULL;
-
-	hdr = (struct ieee80211_assoc_request_frame *)
-		skb_put(skb, sizeof(struct ieee80211_assoc_request_frame));
-
-	hdr->header.frame_control = IEEE80211_STYPE_ASSOC_REQ;
-	hdr->header.duration_id = 37; /* FIXME */
-	memcpy(hdr->header.addr1, beacon->bssid, ETH_ALEN);
-	memcpy(hdr->header.addr2, ieee->dev->dev_addr, ETH_ALEN);
-	memcpy(hdr->header.addr3, beacon->bssid, ETH_ALEN);
-	memcpy(ieee->ap_mac_addr, beacon->bssid, ETH_ALEN); /* for HW security */
-
-	hdr->capability = cpu_to_le16(WLAN_CAPABILITY_BSS);
-	if (beacon->capability & WLAN_CAPABILITY_PRIVACY)
-		hdr->capability |= cpu_to_le16(WLAN_CAPABILITY_PRIVACY);
-	if (beacon->capability & WLAN_CAPABILITY_SHORT_PREAMBLE)
-		hdr->capability |= cpu_to_le16(WLAN_CAPABILITY_SHORT_PREAMBLE);
-
-	if (ieee->short_slot)
-		hdr->capability |= cpu_to_le16(WLAN_CAPABILITY_SHORT_SLOT);
-
-	hdr->listen_interval = 0xa; /* FIXME */
-
-	hdr->info_element.id = MFIE_TYPE_SSID;
-
-	hdr->info_element.len = beacon->ssid_len;
-	tag = skb_put(skb, beacon->ssid_len);
-	memcpy(tag, beacon->ssid, beacon->ssid_len);
-
-	tag = skb_put(skb, rate_len);
-
-	ieee80211_MFIE_Brate(ieee, &tag);
-	ieee80211_MFIE_Grate(ieee, &tag);
-
-	/* add rsn==0 condition for ap's mix security mode(wpa+wpa2)
-	 * choose AES encryption as default algorithm while using mixed mode.
-	 */
-
-	tag = skb_put(skb, ieee->wpa_ie_len);
-	memcpy(tag, ieee->wpa_ie, ieee->wpa_ie_len);
-
-	tag = skb_put(skb, wmm_info_len);
-	if (wmm_info_len)
-	  ieee80211_WMM_Info(ieee, &tag);
-
-	tag = skb_put(skb, turbo_info_len);
-	if (turbo_info_len)
-		ieee80211_TURBO_Info(ieee, &tag);
-
-	return skb;
-}
-
-void ieee80211_associate_abort(struct ieee80211_device *ieee)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&ieee->lock, flags);
-
-	ieee->associate_seq++;
-
-	/* don't scan, and avoid to have the RX path possibly
-	 * try again to associate. Even do not react to AUTH or
-	 * ASSOC response. Just wait for the retry wq to be scheduled.
-	 * Here we will check if there are good nets to associate
-	 * with, so we retry or just get back to NO_LINK and scanning
-	 */
-	if (ieee->state == IEEE80211_ASSOCIATING_AUTHENTICATING) {
-		IEEE80211_DEBUG_MGMT("Authentication failed\n");
-		ieee->softmac_stats.no_auth_rs++;
-	} else {
-		IEEE80211_DEBUG_MGMT("Association failed\n");
-		ieee->softmac_stats.no_ass_rs++;
-	}
-
-	ieee->state = IEEE80211_ASSOCIATING_RETRY;
-
-	queue_delayed_work(ieee->wq, &ieee->associate_retry_wq, IEEE80211_SOFTMAC_ASSOC_RETRY_TIME);
-
-	spin_unlock_irqrestore(&ieee->lock, flags);
-}
-
-static void ieee80211_associate_abort_cb(unsigned long dev)
-{
-	ieee80211_associate_abort((struct ieee80211_device *) dev);
-}
-
-static void ieee80211_associate_step1(struct ieee80211_device *ieee)
-{
-	struct ieee80211_network *beacon = &ieee->current_network;
-	struct sk_buff *skb;
-
-	IEEE80211_DEBUG_MGMT("Stopping scan\n");
-	ieee->softmac_stats.tx_auth_rq++;
-	skb = ieee80211_authentication_req(beacon, ieee, 0);
-	if (!skb) {
-		ieee80211_associate_abort(ieee);
-	} else {
-		ieee->state = IEEE80211_ASSOCIATING_AUTHENTICATING;
-		IEEE80211_DEBUG_MGMT("Sending authentication request\n");
-		softmac_mgmt_xmit(skb, ieee);
-		/* BUGON when you try to add_timer twice, using mod_timer may
-		 * be better.
-		 */
-		if (!timer_pending(&ieee->associate_timer)) {
-			ieee->associate_timer.expires = jiffies + (HZ / 2);
-			add_timer(&ieee->associate_timer);
-		}
-		/* If call dev_kfree_skb_any,a warning will ocur....
-		 * KERNEL: assertion (!atomic_read(&skb->users)) failed at
-		 * net/core/dev.c (1708)
-		 */
-	}
-}
-
-static void ieee80211_rtl_auth_challenge(struct ieee80211_device *ieee, u8 *challenge,
-				  int chlen)
-{
-	u8 *c;
-	struct sk_buff *skb;
-	struct ieee80211_network *beacon = &ieee->current_network;
-	del_timer_sync(&ieee->associate_timer);
-	ieee->associate_seq++;
-	ieee->softmac_stats.tx_auth_rq++;
-
-	skb = ieee80211_authentication_req(beacon, ieee, chlen+2);
-	if (!skb)
-		ieee80211_associate_abort(ieee);
-	else {
-		c = skb_put(skb, chlen+2);
-		*(c++) = MFIE_TYPE_CHALLENGE;
-		*(c++) = chlen;
-		memcpy(c, challenge, chlen);
-
-		IEEE80211_DEBUG_MGMT("Sending authentication challenge response\n");
-
-		ieee80211_encrypt_fragment(ieee, skb, sizeof(struct ieee80211_hdr_3addr));
-
-		softmac_mgmt_xmit(skb, ieee);
-		if (!timer_pending(&ieee->associate_timer)) {
-		ieee->associate_timer.expires = jiffies + (HZ / 2);
-		add_timer(&ieee->associate_timer);
-		}
-		dev_kfree_skb_any(skb);
-	}
-	kfree(challenge);
-}
-
-static void ieee80211_associate_step2(struct ieee80211_device *ieee)
-{
-	struct sk_buff *skb;
-	struct ieee80211_network *beacon = &ieee->current_network;
-
-	del_timer_sync(&ieee->associate_timer);
-
-	IEEE80211_DEBUG_MGMT("Sending association request\n");
-	ieee->softmac_stats.tx_ass_rq++;
-	skb = ieee80211_association_req(beacon, ieee);
-	if (!skb)
-		ieee80211_associate_abort(ieee);
-	else {
-		softmac_mgmt_xmit(skb, ieee);
-		if (!timer_pending(&ieee->associate_timer)) {
-		ieee->associate_timer.expires = jiffies + (HZ / 2);
-		add_timer(&ieee->associate_timer);
-		}
-	}
-}
-
-static void ieee80211_associate_complete_wq(struct work_struct *work)
-{
-	struct ieee80211_device *ieee = container_of(work, struct ieee80211_device, associate_complete_wq);
-
-	printk(KERN_INFO "Associated successfully\n");
-	if (ieee80211_is_54g(&ieee->current_network) &&
-		(ieee->modulation & IEEE80211_OFDM_MODULATION)) {
-		ieee->rate = 540;
-		printk(KERN_INFO"Using G rates\n");
-	} else {
-		ieee->rate = 110;
-		printk(KERN_INFO"Using B rates\n");
-	}
-	ieee->link_change(ieee->dev);
-	notify_wx_assoc_event(ieee);
-	if (ieee->data_hard_resume)
-		ieee->data_hard_resume(ieee->dev);
-	netif_carrier_on(ieee->dev);
-}
-
-static void ieee80211_associate_complete(struct ieee80211_device *ieee)
-{
-	del_timer_sync(&ieee->associate_timer);
-
-	ieee->state = IEEE80211_LINKED;
-	IEEE80211_DEBUG_MGMT("Successfully associated\n");
-
-	queue_work(ieee->wq, &ieee->associate_complete_wq);
-}
-
-static void ieee80211_associate_procedure_wq(struct work_struct *work)
-{
-	struct ieee80211_device *ieee = container_of(work, struct ieee80211_device, associate_procedure_wq);
-
-	ieee->sync_scan_hurryup = 1;
-	down(&ieee->wx_sem);
-
-	if (ieee->data_hard_stop)
-		ieee->data_hard_stop(ieee->dev);
-
-	ieee80211_stop_scan(ieee);
-	ieee->set_chan(ieee->dev, ieee->current_network.channel);
-
-	ieee->associate_seq = 1;
-	ieee80211_associate_step1(ieee);
-
-	up(&ieee->wx_sem);
-}
-
-inline void ieee80211_softmac_new_net(struct ieee80211_device *ieee,
-				      struct ieee80211_network *net)
-{
-	u8 tmp_ssid[IW_ESSID_MAX_SIZE+1];
-	int tmp_ssid_len = 0;
-
-	short apset, ssidset, ssidbroad, apmatch, ssidmatch;
-
-	/* we are interested in new new only if we are not associated
-	 * and we are not associating / authenticating
-	 */
-	if (ieee->state != IEEE80211_NOLINK)
-		return;
-
-	if ((ieee->iw_mode == IW_MODE_INFRA) && !(net->capability & WLAN_CAPABILITY_BSS))
-		return;
-
-	if ((ieee->iw_mode == IW_MODE_ADHOC) && !(net->capability & WLAN_CAPABILITY_IBSS))
-		return;
-
-	if (ieee->iw_mode == IW_MODE_INFRA || ieee->iw_mode == IW_MODE_ADHOC) {
-		/* if the user specified the AP MAC, we need also the essid
-		 * This could be obtained by beacons or, if the network does not
-		 * broadcast it, it can be put manually.
-		 */
-		apset = ieee->wap_set;
-		ssidset = ieee->ssid_set;
-		ssidbroad =  !(net->ssid_len == 0 || net->ssid[0] == '\0');
-		apmatch = (memcmp(ieee->current_network.bssid, net->bssid, ETH_ALEN) == 0);
-
-		if (ieee->current_network.ssid_len != net->ssid_len)
-			ssidmatch = 0;
-		else
-			ssidmatch = (0 == strncmp(ieee->current_network.ssid, net->ssid, net->ssid_len));
-
-		/* if the user set the AP check if match.
-		 * if the network does not broadcast essid we check the user
-		 * supplied ANY essid
-		 * if the network does broadcast and the user does not set essid
-		 * it is OK
-		 * if the network does broadcast and the user did set essid
-		 * chech if essid match
-		 * (apset && apmatch && ((ssidset && ssidbroad && ssidmatch) ||
-		 *  (ssidbroad && !ssidset) || (!ssidbroad && ssidset))) ||
-		 * if the ap is not set, check that the user set the bssid and
-		 * the network does broadcast and that those two bssid matches
-		 * (!apset && ssidset && ssidbroad && ssidmatch)
-		 */
-		if ((apset && apmatch && ((ssidset && ssidbroad && ssidmatch) ||
-		     (ssidbroad && !ssidset) || (!ssidbroad && ssidset))) ||
-		    (!apset && ssidset && ssidbroad && ssidmatch)) {
-			/* if the essid is hidden replace it with the
-			 * essid provided by the user.
-			 */
-			if (!ssidbroad) {
-				strncpy(tmp_ssid, ieee->current_network.ssid, IW_ESSID_MAX_SIZE);
-				tmp_ssid_len = ieee->current_network.ssid_len;
-			}
-			memcpy(&ieee->current_network, net, sizeof(struct ieee80211_network));
-
-			if (!ssidbroad) {
-				strncpy(ieee->current_network.ssid, tmp_ssid, IW_ESSID_MAX_SIZE);
-				ieee->current_network.ssid_len = tmp_ssid_len;
-			}
-			printk(KERN_INFO"Linking with %s: channel is %d\n", ieee->current_network.ssid, ieee->current_network.channel);
-
-			if (ieee->iw_mode == IW_MODE_INFRA) {
-				ieee->state = IEEE80211_ASSOCIATING;
-				ieee->beinretry = false;
-				queue_work(ieee->wq, &ieee->associate_procedure_wq);
-			} else {
-				if (ieee80211_is_54g(&ieee->current_network) &&
-						(ieee->modulation & IEEE80211_OFDM_MODULATION)) {
-					ieee->rate = 540;
-					printk(KERN_INFO"Using G rates\n");
-				} else {
-					ieee->rate = 110;
-					printk(KERN_INFO"Using B rates\n");
-				}
-				ieee->state = IEEE80211_LINKED;
-				ieee->beinretry = false;
-			}
-		}
-	}
-}
-
-void ieee80211_softmac_check_all_nets(struct ieee80211_device *ieee)
-{
-	unsigned long flags;
-	struct ieee80211_network *target;
-
-	spin_lock_irqsave(&ieee->lock, flags);
-	list_for_each_entry(target, &ieee->network_list, list) {
-		/* if the state become different that NOLINK means
-		 * we had found what we are searching for
-		 */
-		if (ieee->state != IEEE80211_NOLINK)
-			break;
-
-		if (ieee->scan_age == 0 || time_after(target->last_scanned + ieee->scan_age, jiffies))
-			ieee80211_softmac_new_net(ieee, target);
-	}
-	spin_unlock_irqrestore(&ieee->lock, flags);
-}
-
-static inline u16 auth_parse(struct sk_buff *skb, u8 **challenge, int *chlen)
-{
-	struct ieee80211_authentication *a;
-	u8 *t;
-	if (skb->len < (sizeof(struct ieee80211_authentication) - sizeof(struct ieee80211_info_element))) {
-		IEEE80211_DEBUG_MGMT("invalid len in auth resp: %d\n", skb->len);
-		return 0xcafe;
-	}
-	*challenge = NULL;
-	a = (struct ieee80211_authentication *) skb->data;
-	if (skb->len > (sizeof(struct ieee80211_authentication) + 3)) {
-		t = skb->data + sizeof(struct ieee80211_authentication);
-
-		if (*(t++) == MFIE_TYPE_CHALLENGE) {
-			*chlen = *(t++);
-			*challenge = kmemdup(t, *chlen, GFP_ATOMIC);
-			if (!*challenge)
-				return -ENOMEM;
-		}
-	}
-	return cpu_to_le16(a->status);
-}
-
-static int auth_rq_parse(struct sk_buff *skb, u8 *dest)
-{
-	struct ieee80211_authentication *a;
-
-	if (skb->len < (sizeof(struct ieee80211_authentication) - sizeof(struct ieee80211_info_element))) {
-		IEEE80211_DEBUG_MGMT("invalid len in auth request: %d\n", skb->len);
-		return -1;
-	}
-	a = (struct ieee80211_authentication *) skb->data;
-
-	memcpy(dest, a->header.addr2, ETH_ALEN);
-
-	if (le16_to_cpu(a->algorithm) != WLAN_AUTH_OPEN)
-		return  WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG;
-
-	return WLAN_STATUS_SUCCESS;
-}
-
-static short probe_rq_parse(struct ieee80211_device *ieee, struct sk_buff *skb,
-			    u8 *src)
-{
-	u8 *tag;
-	u8 *skbend;
-	u8 *ssid = NULL;
-	u8 ssidlen = 0;
-
-	struct ieee80211_hdr_3addr   *header =
-		(struct ieee80211_hdr_3addr   *) skb->data;
-
-	if (skb->len < sizeof(struct ieee80211_hdr_3addr))
-		return -1; /* corrupted */
-
-	memcpy(src, header->addr2, ETH_ALEN);
-
-	skbend = (u8 *)skb->data + skb->len;
-
-	tag = skb->data + sizeof(struct ieee80211_hdr_3addr);
-
-	while (tag+1 < skbend) {
-		if (*tag == 0) {
-			ssid = tag+2;
-			ssidlen = *(tag+1);
-			break;
-		}
-		tag++; /* point to the len field */
-		tag = tag + *(tag); /* point to the last data byte of the tag */
-		tag++; /* point to the next tag */
-	}
-
-	if (ssidlen == 0)
-		return 1;
-
-	if (!ssid)
-		 return 1; /* ssid not found in tagged param */
-
-	return (!strncmp(ssid, ieee->current_network.ssid, ssidlen));
-
-}
-
-static int assoc_rq_parse(struct sk_buff *skb, u8 *dest)
-{
-	struct ieee80211_assoc_request_frame *a;
-
-	if (skb->len < (sizeof(struct ieee80211_assoc_request_frame) -
-		sizeof(struct ieee80211_info_element))) {
-
-		IEEE80211_DEBUG_MGMT("invalid len in auth request:%d\n", skb->len);
-		return -1;
-	}
-
-	a = (struct ieee80211_assoc_request_frame *) skb->data;
-
-	memcpy(dest, a->header.addr2, ETH_ALEN);
-
-	return 0;
-}
-
-static inline u16 assoc_parse(struct sk_buff *skb, int *aid)
-{
-	struct ieee80211_assoc_response_frame *a;
-	if (skb->len < sizeof(struct ieee80211_assoc_response_frame)) {
-		IEEE80211_DEBUG_MGMT("invalid len in auth resp: %d\n", skb->len);
-		return 0xcafe;
-	}
-
-	a = (struct ieee80211_assoc_response_frame *) skb->data;
-	*aid = le16_to_cpu(a->aid) & 0x3fff;
-	return le16_to_cpu(a->status);
-}
-
-static inline void ieee80211_rx_probe_rq(struct ieee80211_device *ieee,
-					 struct sk_buff *skb)
-{
-	u8 dest[ETH_ALEN];
-
-	ieee->softmac_stats.rx_probe_rq++;
-	if (probe_rq_parse(ieee, skb, dest)) {
-		ieee->softmac_stats.tx_probe_rs++;
-		ieee80211_resp_to_probe(ieee, dest);
-	}
-}
-
-inline void ieee80211_rx_auth_rq(struct ieee80211_device *ieee,
-				 struct sk_buff *skb)
-{
-	u8 dest[ETH_ALEN];
-	int status;
-	ieee->softmac_stats.rx_auth_rq++;
-
-	status = auth_rq_parse(skb, dest);
-	if (status != -1)
-		ieee80211_resp_to_auth(ieee, status, dest);
-}
-
-inline void
-ieee80211_rx_assoc_rq(struct ieee80211_device *ieee, struct sk_buff *skb)
-{
-
-	u8 dest[ETH_ALEN];
-
-	ieee->softmac_stats.rx_ass_rq++;
-	if (assoc_rq_parse(skb, dest) != -1)
-		ieee80211_resp_to_assoc_rq(ieee, dest);
-
-
-	printk(KERN_INFO"New client associated: %pM\n", dest);
-}
-
-void ieee80211_sta_ps_send_null_frame(struct ieee80211_device *ieee, short pwr)
-{
-	struct sk_buff *buf = ieee80211_null_func(ieee, pwr);
-
-	if (buf)
-		softmac_ps_mgmt_xmit(buf, ieee);
-}
-
-static short ieee80211_sta_ps_sleep(struct ieee80211_device *ieee, u32 *time_h,
-			     u32 *time_l)
-{
-	int timeout = 0;
-
-	u8 dtim;
-	dtim = ieee->current_network.dtim_data;
-
-	if (!(dtim & IEEE80211_DTIM_VALID))
-		return 0;
-	else
-		timeout = ieee->current_network.beacon_interval;
-
-	ieee->current_network.dtim_data = IEEE80211_DTIM_INVALID;
-
-	if (dtim & ((IEEE80211_DTIM_UCAST | IEEE80211_DTIM_MBCAST) & ieee->ps))
-		return 2;
-
-	if (!time_after(jiffies, ieee->dev->trans_start + MSECS(timeout)))
-		return 0;
-
-	if (!time_after(jiffies, ieee->last_rx_ps_time + MSECS(timeout)))
-		return 0;
-
-	if ((ieee->softmac_features & IEEE_SOFTMAC_SINGLE_QUEUE) &&
-		(ieee->mgmt_queue_tail != ieee->mgmt_queue_head))
-		return 0;
-
-	if (time_l) {
-		*time_l = ieee->current_network.last_dtim_sta_time[0]
-			+ MSECS((ieee->current_network.beacon_interval));
-	}
-
-	if (time_h) {
-		*time_h = ieee->current_network.last_dtim_sta_time[1];
-		if (time_l && *time_l < ieee->current_network.last_dtim_sta_time[0])
-			*time_h += 1;
-	}
-
-	return 1;
-}
-
-static inline void ieee80211_sta_ps(struct ieee80211_device *ieee)
-{
-
-	u32 th, tl;
-	short sleep;
-
-	unsigned long flags, flags2;
-
-	spin_lock_irqsave(&ieee->lock, flags);
-
-	if ((ieee->ps == IEEE80211_PS_DISABLED ||
-		ieee->iw_mode != IW_MODE_INFRA ||
-		ieee->state != IEEE80211_LINKED)) {
-
-		/* #warning CHECK_LOCK_HERE */
-		spin_lock_irqsave(&ieee->mgmt_tx_lock, flags2);
-
-		ieee80211_sta_wakeup(ieee, 1);
-
-		spin_unlock_irqrestore(&ieee->mgmt_tx_lock, flags2);
-	}
-
-	sleep = ieee80211_sta_ps_sleep(ieee, &th, &tl);
-	/* 2 wake, 1 sleep, 0 do nothing */
-	if (sleep == 0)
-		goto out;
-
-	if (sleep == 1) {
-		if (ieee->sta_sleep == 1)
-			ieee->enter_sleep_state(ieee->dev, th, tl);
-
-		else if (ieee->sta_sleep == 0) {
-			spin_lock_irqsave(&ieee->mgmt_tx_lock, flags2);
-			if (ieee->ps_is_queue_empty(ieee->dev)) {
-				ieee->sta_sleep = 2;
-
-				ieee->ps_request_tx_ack(ieee->dev);
-
-				ieee80211_sta_ps_send_null_frame(ieee, 1);
-
-				ieee->ps_th = th;
-				ieee->ps_tl = tl;
-			}
-			spin_unlock_irqrestore(&ieee->mgmt_tx_lock, flags2);
-		}
-	} else if (sleep == 2) {
-		/* #warning CHECK_LOCK_HERE */
-		spin_lock_irqsave(&ieee->mgmt_tx_lock, flags2);
-
-		ieee80211_sta_wakeup(ieee, 1);
-
-		spin_unlock_irqrestore(&ieee->mgmt_tx_lock, flags2);
-	}
-out:
-	spin_unlock_irqrestore(&ieee->lock, flags);
-}
-
-void ieee80211_sta_wakeup(struct ieee80211_device *ieee, short nl)
-{
-	if (ieee->sta_sleep == 0) {
-		if (nl) {
-			ieee->ps_request_tx_ack(ieee->dev);
-			ieee80211_sta_ps_send_null_frame(ieee, 0);
-		}
-		return;
-	}
-
-	if (ieee->sta_sleep == 1)
-		ieee->sta_wake_up(ieee->dev);
-
-	ieee->sta_sleep = 0;
-
-	if (nl) {
-		ieee->ps_request_tx_ack(ieee->dev);
-		ieee80211_sta_ps_send_null_frame(ieee, 0);
-	}
-}
-
-void ieee80211_ps_tx_ack(struct ieee80211_device *ieee, short success)
-{
-	unsigned long flags, flags2;
-
-	spin_lock_irqsave(&ieee->lock, flags);
-	if (ieee->sta_sleep == 2) {
-		/* Null frame with PS bit set */
-		if (success) {
-			ieee->sta_sleep = 1;
-			ieee->enter_sleep_state(ieee->dev, ieee->ps_th, ieee->ps_tl);
-		}
-		/* if the card report not success we can't be sure the AP
-		 * has not RXed so we can't assume the AP believe us awake
-		 */
-	} else {
-		if ((ieee->sta_sleep == 0) && !success) {
-			spin_lock_irqsave(&ieee->mgmt_tx_lock, flags2);
-			ieee80211_sta_ps_send_null_frame(ieee, 0);
-			spin_unlock_irqrestore(&ieee->mgmt_tx_lock, flags2);
-		}
-	}
-	spin_unlock_irqrestore(&ieee->lock, flags);
-}
-
-inline int ieee80211_rx_frame_softmac(struct ieee80211_device *ieee,
-				      struct sk_buff *skb,
-				      struct ieee80211_rx_stats *rx_stats,
-				      u16 type,	u16 stype)
-{
-	struct ieee80211_hdr_3addr *header = (struct ieee80211_hdr_3addr *) skb->data;
-	u16 errcode;
-	u8 *challenge = NULL;
-	int chlen = 0;
-	int aid = 0;
-	struct ieee80211_assoc_response_frame *assoc_resp;
-	struct ieee80211_info_element *info_element;
-
-	if (!ieee->proto_started)
-		return 0;
-
-	if (ieee->sta_sleep || (ieee->ps != IEEE80211_PS_DISABLED &&
-		ieee->iw_mode == IW_MODE_INFRA &&
-		ieee->state == IEEE80211_LINKED))
-
-		tasklet_schedule(&ieee->ps_task);
-
-	if (WLAN_FC_GET_STYPE(header->frame_control) != IEEE80211_STYPE_PROBE_RESP &&
-		WLAN_FC_GET_STYPE(header->frame_control) != IEEE80211_STYPE_BEACON)
-		ieee->last_rx_ps_time = jiffies;
-
-	switch (WLAN_FC_GET_STYPE(header->frame_control)) {
-		case IEEE80211_STYPE_ASSOC_RESP:
-		case IEEE80211_STYPE_REASSOC_RESP:
-			IEEE80211_DEBUG_MGMT("received [RE]ASSOCIATION RESPONSE (%d)\n",
-					WLAN_FC_GET_STYPE(header->frame_ctl));
-			if ((ieee->softmac_features & IEEE_SOFTMAC_ASSOCIATE) &&
-				ieee->state == IEEE80211_ASSOCIATING_AUTHENTICATED &&
-				ieee->iw_mode == IW_MODE_INFRA) {
-				errcode = assoc_parse(skb, &aid);
-				if (0 == errcode) {
-					u16 left;
-
-					ieee->state = IEEE80211_LINKED;
-					ieee->assoc_id = aid;
-					ieee->softmac_stats.rx_ass_ok++;
-					/* card type is 8187 */
-					if (1 == rx_stats->nic_type)
-						goto associate_complete;
-
-					assoc_resp = (struct ieee80211_assoc_response_frame *)skb->data;
-					info_element = &assoc_resp->info_element;
-					left = skb->len - ((void *)info_element - (void *)assoc_resp);
-
-					while (left >= sizeof(struct ieee80211_info_element_hdr)) {
-						if (sizeof(struct ieee80211_info_element_hdr) + info_element->len > left) {
-							printk(KERN_WARNING "[re]associate response error!");
-							return 1;
-						}
-						switch (info_element->id) {
-						  case MFIE_TYPE_GENERIC:
-							IEEE80211_DEBUG_SCAN("MFIE_TYPE_GENERIC: %d bytes\n", info_element->len);
-							if (info_element->len >= 8  &&
-							    info_element->data[0] == 0x00 &&
-							    info_element->data[1] == 0x50 &&
-							    info_element->data[2] == 0xf2 &&
-							    info_element->data[3] == 0x02 &&
-							    info_element->data[4] == 0x01) {
-								/* Not care about version at present.
-								 * WMM Parameter Element.
-								 */
-								memcpy(ieee->current_network.wmm_param, (u8 *)(info_element->data\
-									+ 8), (info_element->len - 8));
-
-								if (((ieee->current_network.wmm_info^info_element->data[6])& \
-										    0x0f) || (!ieee->init_wmmparam_flag)) {
-									/* refresh parameter element for current network
-									 * update the register parameter for hardware.
-									 */
-									ieee->init_wmmparam_flag = 1;
-									queue_work(ieee->wq, &ieee->wmm_param_update_wq);
-								}
-								/* update info_element for current network */
-								ieee->current_network.wmm_info  = info_element->data[6];
-							}
-							break;
-						  default:
-							/* nothing to do at present!!! */
-							break;
-						}
-
-						left -= sizeof(struct ieee80211_info_element_hdr) +
-							info_element->len;
-						info_element = (struct ieee80211_info_element *)
-							&info_element->data[info_element->len];
-					}
-					/* legacy AP, reset the AC_xx_param register */
-					if (!ieee->init_wmmparam_flag) {
-						queue_work(ieee->wq, &ieee->wmm_param_update_wq);
-						ieee->init_wmmparam_flag = 1; /* indicate AC_xx_param upated since last associate */
-					}
-associate_complete:
-					ieee80211_associate_complete(ieee);
-				} else {
-					ieee->softmac_stats.rx_ass_err++;
-					IEEE80211_DEBUG_MGMT(
-						"Association response status code 0x%x\n",
-						errcode);
-					ieee80211_associate_abort(ieee);
-				}
-			}
-			break;
-		case IEEE80211_STYPE_ASSOC_REQ:
-		case IEEE80211_STYPE_REASSOC_REQ:
-			if ((ieee->softmac_features & IEEE_SOFTMAC_ASSOCIATE) &&
-				ieee->iw_mode == IW_MODE_MASTER)
-
-				ieee80211_rx_assoc_rq(ieee, skb);
-			break;
-		case IEEE80211_STYPE_AUTH:
-			if (ieee->softmac_features & IEEE_SOFTMAC_ASSOCIATE) {
-				if (ieee->state == IEEE80211_ASSOCIATING_AUTHENTICATING &&
-				ieee->iw_mode == IW_MODE_INFRA){
-						IEEE80211_DEBUG_MGMT("Received authentication response");
-
-						errcode = auth_parse(skb, &challenge, &chlen);
-						if (0 == errcode) {
-							if (ieee->open_wep || !challenge) {
-								ieee->state = IEEE80211_ASSOCIATING_AUTHENTICATED;
-								ieee->softmac_stats.rx_auth_rs_ok++;
-
-								ieee80211_associate_step2(ieee);
-							} else {
-								ieee80211_rtl_auth_challenge(ieee, challenge, chlen);
-							}
-						} else {
-							ieee->softmac_stats.rx_auth_rs_err++;
-							IEEE80211_DEBUG_MGMT("Authentication response status code 0x%x", errcode);
-							ieee80211_associate_abort(ieee);
-						}
-
-					} else if (ieee->iw_mode == IW_MODE_MASTER) {
-						ieee80211_rx_auth_rq(ieee, skb);
-					}
-				}
-			break;
-		case IEEE80211_STYPE_PROBE_REQ:
-			if ((ieee->softmac_features & IEEE_SOFTMAC_PROBERS) &&
-				((ieee->iw_mode == IW_MODE_ADHOC ||
-				ieee->iw_mode == IW_MODE_MASTER) &&
-				ieee->state == IEEE80211_LINKED))
-
-				ieee80211_rx_probe_rq(ieee, skb);
-			break;
-		case IEEE80211_STYPE_DISASSOC:
-		case IEEE80211_STYPE_DEAUTH:
-			/* FIXME for now repeat all the association procedure
-			 * both for disassociation and deauthentication
-			 */
-			if ((ieee->softmac_features & IEEE_SOFTMAC_ASSOCIATE) &&
-				(ieee->state == IEEE80211_LINKED) &&
-				(ieee->iw_mode == IW_MODE_INFRA) &&
-				(!memcmp(header->addr2, ieee->current_network.bssid, ETH_ALEN))) {
-				ieee->state = IEEE80211_ASSOCIATING;
-				ieee->softmac_stats.reassoc++;
-
-				queue_work(ieee->wq, &ieee->associate_procedure_wq);
-			}
-			break;
-		default:
-			return -1;
-			break;
-	}
-	return 0;
-}
-
-/* following are for a simpler TX queue management.
- * Instead of using netif_[stop/wake]_queue the driver
- * will uses these two function (plus a reset one), that
- * will internally uses the kernel netif_* and takes
- * care of the ieee802.11 fragmentation.
- * So the driver receives a fragment per time and might
- * call the stop function when it want without take care
- * to have enough room to TX an entire packet.
- * This might be useful if each fragment need it's own
- * descriptor, thus just keep a total free memory > than
- * the max fragmentation threshold is not enough.. If the
- * ieee802.11 stack passed a TXB struct then you needed
- * to keep N free descriptors where
- * N = MAX_PACKET_SIZE / MIN_FRAG_TRESHOLD
- * In this way you need just one and the 802.11 stack
- * will take care of buffering fragments and pass them to
- * to the driver later, when it wakes the queue.
- */
-
-void ieee80211_softmac_xmit(struct ieee80211_txb *txb,
-			    struct ieee80211_device *ieee)
-{
-	unsigned long flags;
-	int  i;
-
-	spin_lock_irqsave(&ieee->lock, flags);
-
-	/* called with 2nd parm 0, no tx mgmt lock required */
-	ieee80211_sta_wakeup(ieee, 0);
-
-	for (i = 0; i < txb->nr_frags; i++) {
-		if (ieee->queue_stop) {
-			ieee->tx_pending.txb = txb;
-			ieee->tx_pending.frag = i;
-			goto exit;
-		} else {
-			ieee->softmac_data_hard_start_xmit(
-				txb->fragments[i],
-				ieee->dev, ieee->rate);
-			ieee->stats.tx_packets++;
-			ieee->stats.tx_bytes += txb->fragments[i]->len;
-			ieee->dev->trans_start = jiffies;
-		}
-	}
-
-	ieee80211_txb_free(txb);
-
-	exit:
-	spin_unlock_irqrestore(&ieee->lock, flags);
-}
-
-/* called with ieee->lock acquired */
-static void ieee80211_resume_tx(struct ieee80211_device *ieee)
-{
-	int i;
-	for (i = ieee->tx_pending.frag; i < ieee->tx_pending.txb->nr_frags; i++) {
-
-		if (ieee->queue_stop) {
-			ieee->tx_pending.frag = i;
-			return;
-		} else {
-			ieee->softmac_data_hard_start_xmit(
-				ieee->tx_pending.txb->fragments[i],
-				ieee->dev, ieee->rate);
-			ieee->stats.tx_packets++;
-			ieee->dev->trans_start = jiffies;
-		}
-	}
-
-	ieee80211_txb_free(ieee->tx_pending.txb);
-	ieee->tx_pending.txb = NULL;
-}
-
-void ieee80211_reset_queue(struct ieee80211_device *ieee)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&ieee->lock, flags);
-	init_mgmt_queue(ieee);
-	if (ieee->tx_pending.txb) {
-		ieee80211_txb_free(ieee->tx_pending.txb);
-		ieee->tx_pending.txb = NULL;
-	}
-	ieee->queue_stop = 0;
-	spin_unlock_irqrestore(&ieee->lock, flags);
-}
-
-void ieee80211_rtl_wake_queue(struct ieee80211_device *ieee)
-{
-	unsigned long flags;
-	struct sk_buff *skb;
-	struct ieee80211_hdr_3addr  *header;
-
-	spin_lock_irqsave(&ieee->lock, flags);
-	if (!ieee->queue_stop)
-		goto exit;
-
-	ieee->queue_stop = 0;
-
-	if (ieee->softmac_features & IEEE_SOFTMAC_SINGLE_QUEUE) {
-		while (!ieee->queue_stop && (skb = dequeue_mgmt(ieee))) {
-			header = (struct ieee80211_hdr_3addr  *) skb->data;
-
-			header->seq_ctrl = cpu_to_le16(ieee->seq_ctrl[0] << 4);
-
-			if (ieee->seq_ctrl[0] == 0xFFF)
-				ieee->seq_ctrl[0] = 0;
-			else
-				ieee->seq_ctrl[0]++;
-
-			ieee->softmac_data_hard_start_xmit(skb, ieee->dev, ieee->basic_rate);
-			dev_kfree_skb_any(skb);
-		}
-	}
-	if (!ieee->queue_stop && ieee->tx_pending.txb)
-		ieee80211_resume_tx(ieee);
-
-	if (!ieee->queue_stop && netif_queue_stopped(ieee->dev)) {
-		ieee->softmac_stats.swtxawake++;
-		netif_wake_queue(ieee->dev);
-	}
-exit:
-	spin_unlock_irqrestore(&ieee->lock, flags);
-}
-
-void ieee80211_rtl_stop_queue(struct ieee80211_device *ieee)
-{
-	if (!netif_queue_stopped(ieee->dev)) {
-		netif_stop_queue(ieee->dev);
-		ieee->softmac_stats.swtxstop++;
-	}
-	ieee->queue_stop = 1;
-}
-
-inline void ieee80211_randomize_cell(struct ieee80211_device *ieee)
-{
-	random_ether_addr(ieee->current_network.bssid);
-}
-
-/* called in user context only */
-void ieee80211_start_master_bss(struct ieee80211_device *ieee)
-{
-	ieee->assoc_id = 1;
-
-	if (ieee->current_network.ssid_len == 0) {
-		strncpy(ieee->current_network.ssid,
-			IEEE80211_DEFAULT_TX_ESSID,
-			IW_ESSID_MAX_SIZE);
-
-		ieee->current_network.ssid_len = strlen(IEEE80211_DEFAULT_TX_ESSID);
-		ieee->ssid_set = 1;
-	}
-
-	memcpy(ieee->current_network.bssid, ieee->dev->dev_addr, ETH_ALEN);
-
-	ieee->set_chan(ieee->dev, ieee->current_network.channel);
-	ieee->state = IEEE80211_LINKED;
-	ieee->link_change(ieee->dev);
-	notify_wx_assoc_event(ieee);
-
-	if (ieee->data_hard_resume)
-		ieee->data_hard_resume(ieee->dev);
-
-	netif_carrier_on(ieee->dev);
-}
-
-static void ieee80211_start_monitor_mode(struct ieee80211_device *ieee)
-{
-	if (ieee->raw_tx) {
-
-		if (ieee->data_hard_resume)
-			ieee->data_hard_resume(ieee->dev);
-
-		netif_carrier_on(ieee->dev);
-	}
-}
-
-static void ieee80211_start_ibss_wq(struct work_struct *work)
-{
-	struct delayed_work *dwork = to_delayed_work(work);
-	struct ieee80211_device *ieee = container_of(dwork, struct ieee80211_device, start_ibss_wq);
-
-	/* iwconfig mode ad-hoc will schedule this and return
-	 * on the other hand this will block further iwconfig SET
-	 * operations because of the wx_sem hold.
-	 * Anyway some most set operations set a flag to speed-up
-	 * (abort) this wq (when syncro scanning) before sleeping
-	 * on the semaphore
-	 */
-
-	down(&ieee->wx_sem);
-
-	if (ieee->current_network.ssid_len == 0) {
-		strcpy(ieee->current_network.ssid, IEEE80211_DEFAULT_TX_ESSID);
-		ieee->current_network.ssid_len = strlen(IEEE80211_DEFAULT_TX_ESSID);
-		ieee->ssid_set = 1;
-	}
-
-	/* check if we have this cell in our network list */
-	ieee80211_softmac_check_all_nets(ieee);
-
-	if (ieee->state == IEEE80211_NOLINK)
-		ieee->current_network.channel = 10;
-	/* if not then the state is not linked. Maybe the user switched to
-	 * ad-hoc mode just after being in monitor mode, or just after
-	 * being very few time in managed mode (so the card have had no
-	 * time to scan all the chans..) or we have just run up the iface
-	 * after setting ad-hoc mode. So we have to give another try..
-	 * Here, in ibss mode, should be safe to do this without extra care
-	 * (in bss mode we had to make sure no-one tried to associate when
-	 * we had just checked the ieee->state and we was going to start the
-	 * scan) because in ibss mode the ieee80211_new_net function, when
-	 * finds a good net, just set the ieee->state to IEEE80211_LINKED,
-	 * so, at worst, we waste a bit of time to initiate an unneeded syncro
-	 * scan, that will stop at the first round because it sees the state
-	 * associated.
-	 */
-	if (ieee->state == IEEE80211_NOLINK)
-		ieee80211_start_scan_syncro(ieee);
-
-	/* the network definitively is not here.. create a new cell */
-	if (ieee->state == IEEE80211_NOLINK) {
-		printk("creating new IBSS cell\n");
-		if (!ieee->wap_set)
-			ieee80211_randomize_cell(ieee);
-
-		if (ieee->modulation & IEEE80211_CCK_MODULATION) {
-			ieee->current_network.rates_len = 4;
-
-			ieee->current_network.rates[0] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_1MB;
-			ieee->current_network.rates[1] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_2MB;
-			ieee->current_network.rates[2] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_5MB;
-			ieee->current_network.rates[3] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_11MB;
-
-		} else
-			ieee->current_network.rates_len = 0;
-
-		if (ieee->modulation & IEEE80211_OFDM_MODULATION) {
-			ieee->current_network.rates_ex_len = 8;
-
-			ieee->current_network.rates_ex[0] = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_6MB;
-			ieee->current_network.rates_ex[1] = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_9MB;
-			ieee->current_network.rates_ex[2] = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_12MB;
-			ieee->current_network.rates_ex[3] = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_18MB;
-			ieee->current_network.rates_ex[4] = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_24MB;
-			ieee->current_network.rates_ex[5] = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_36MB;
-			ieee->current_network.rates_ex[6] = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_48MB;
-			ieee->current_network.rates_ex[7] = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_54MB;
-
-			ieee->rate = 540;
-		} else {
-			ieee->current_network.rates_ex_len = 0;
-			ieee->rate = 110;
-		}
-
-		/* By default, WMM function will be disabled in IBSS mode */
-		ieee->current_network.QoS_Enable = 0;
-
-		ieee->current_network.atim_window = 0;
-		ieee->current_network.capability = WLAN_CAPABILITY_IBSS;
-		if (ieee->short_slot)
-			ieee->current_network.capability |= WLAN_CAPABILITY_SHORT_SLOT;
-	}
-
-	ieee->state = IEEE80211_LINKED;
-	ieee->set_chan(ieee->dev, ieee->current_network.channel);
-	ieee->link_change(ieee->dev);
-
-	notify_wx_assoc_event(ieee);
-
-	ieee80211_start_send_beacons(ieee);
-	printk(KERN_WARNING "after sending beacon packet!\n");
-
-	if (ieee->data_hard_resume)
-		ieee->data_hard_resume(ieee->dev);
-
-	netif_carrier_on(ieee->dev);
-
-	up(&ieee->wx_sem);
-}
-
-inline void ieee80211_start_ibss(struct ieee80211_device *ieee)
-{
-	queue_delayed_work(ieee->wq, &ieee->start_ibss_wq, 100);
-}
-
-/* this is called only in user context, with wx_sem held */
-void ieee80211_start_bss(struct ieee80211_device *ieee)
-{
-	unsigned long flags;
-	/* Ref: 802.11d 11.1.3.3
-	 * STA shall not start a BSS unless properly formed Beacon frame
-	 * including a Country IE.
-	 */
-	if (IS_DOT11D_ENABLE(ieee) && !IS_COUNTRY_IE_VALID(ieee)) {
-		if (!ieee->bGlobalDomain)
-			return;
-	}
-	/* check if we have already found the net we are interested in (if any).
-	 * if not (we are disassociated and we are not
-	 * in associating / authenticating phase) start the background scanning.
-	 */
-	ieee80211_softmac_check_all_nets(ieee);
-
-	/* ensure no-one start an associating process (thus setting
-	 * the ieee->state to ieee80211_ASSOCIATING) while we
-	 * have just cheked it and we are going to enable scan.
-	 * The ieee80211_new_net function is always called with
-	 * lock held (from both ieee80211_softmac_check_all_nets and
-	 * the rx path), so we cannot be in the middle of such function
-	 */
-	spin_lock_irqsave(&ieee->lock, flags);
-
-	if (ieee->state == IEEE80211_NOLINK) {
-		ieee->actscanning = true;
-		ieee80211_rtl_start_scan(ieee);
-	}
-	spin_unlock_irqrestore(&ieee->lock, flags);
-}
-
-/* called only in userspace context */
-void ieee80211_disassociate(struct ieee80211_device *ieee)
-{
-	netif_carrier_off(ieee->dev);
-
-	if (ieee->softmac_features & IEEE_SOFTMAC_TX_QUEUE)
-			ieee80211_reset_queue(ieee);
-
-	if (ieee->data_hard_stop)
-			ieee->data_hard_stop(ieee->dev);
-
-	if (IS_DOT11D_ENABLE(ieee))
-		Dot11d_Reset(ieee);
-
-	ieee->link_change(ieee->dev);
-	if (ieee->state == IEEE80211_LINKED)
-		notify_wx_assoc_event(ieee);
-	ieee->state = IEEE80211_NOLINK;
-
-}
-static void ieee80211_associate_retry_wq(struct work_struct *work)
-{
-	struct delayed_work *dwork = to_delayed_work(work);
-	struct ieee80211_device *ieee = container_of(dwork, struct ieee80211_device, associate_retry_wq);
-	unsigned long flags;
-	down(&ieee->wx_sem);
-	if (!ieee->proto_started)
-		goto exit;
-	if (ieee->state != IEEE80211_ASSOCIATING_RETRY)
-		goto exit;
-	/* until we do not set the state to IEEE80211_NOLINK
-	* there are no possibility to have someone else trying
-	* to start an association procedure (we get here with
-	* ieee->state = IEEE80211_ASSOCIATING).
-	* When we set the state to IEEE80211_NOLINK it is possible
-	* that the RX path run an attempt to associate, but
-	* both ieee80211_softmac_check_all_nets and the
-	* RX path works with ieee->lock held so there are no
-	* problems. If we are still disassociated then start a scan.
-	* the lock here is necessary to ensure no one try to start
-	* an association procedure when we have just checked the
-	* state and we are going to start the scan.
-	*/
-	ieee->state = IEEE80211_NOLINK;
-	ieee->beinretry = true;
-	ieee80211_softmac_check_all_nets(ieee);
-
-	spin_lock_irqsave(&ieee->lock, flags);
-
-	if (ieee->state == IEEE80211_NOLINK) {
-		ieee->beinretry = false;
-		ieee->actscanning = true;
-		ieee80211_rtl_start_scan(ieee);
-	}
-	if (ieee->state == IEEE80211_NOLINK)
-		notify_wx_assoc_event(ieee);
-	spin_unlock_irqrestore(&ieee->lock, flags);
-
-exit:
-	up(&ieee->wx_sem);
-}
-
-struct sk_buff *ieee80211_get_beacon_(struct ieee80211_device *ieee)
-{
-	u8 broadcast_addr[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
-
-	struct sk_buff *skb = NULL;
-	struct ieee80211_probe_response *b;
-
-	skb = ieee80211_probe_resp(ieee, broadcast_addr);
-	if (!skb)
-		return NULL;
-
-	b = (struct ieee80211_probe_response *) skb->data;
-	b->header.frame_ctl = cpu_to_le16(IEEE80211_STYPE_BEACON);
-
-	return skb;
-}
-
-struct sk_buff *ieee80211_get_beacon(struct ieee80211_device *ieee)
-{
-	struct sk_buff *skb;
-	struct ieee80211_probe_response *b;
-
-	skb = ieee80211_get_beacon_(ieee);
-	if (!skb)
-		return NULL;
-
-	b = (struct ieee80211_probe_response *) skb->data;
-	b->header.seq_ctrl = cpu_to_le16(ieee->seq_ctrl[0] << 4);
-
-	if (ieee->seq_ctrl[0] == 0xFFF)
-		ieee->seq_ctrl[0] = 0;
-	else
-		ieee->seq_ctrl[0]++;
-
-	return skb;
-}
-
-void ieee80211_softmac_stop_protocol(struct ieee80211_device *ieee)
-{
-	ieee->sync_scan_hurryup = 1;
-	down(&ieee->wx_sem);
-	ieee80211_stop_protocol(ieee);
-	up(&ieee->wx_sem);
-}
-
-void ieee80211_stop_protocol(struct ieee80211_device *ieee)
-{
-	if (!ieee->proto_started)
-		return;
-
-	ieee->proto_started = 0;
-
-	ieee80211_stop_send_beacons(ieee);
-	if ((ieee->iw_mode == IW_MODE_INFRA) && (ieee->state == IEEE80211_LINKED))
-		SendDisassociation(ieee, NULL, WLAN_REASON_DISASSOC_STA_HAS_LEFT);
-
-	del_timer_sync(&ieee->associate_timer);
-	cancel_delayed_work(&ieee->associate_retry_wq);
-	cancel_delayed_work(&ieee->start_ibss_wq);
-	ieee80211_stop_scan(ieee);
-
-	ieee80211_disassociate(ieee);
-}
-
-void ieee80211_softmac_start_protocol(struct ieee80211_device *ieee)
-{
-	ieee->sync_scan_hurryup = 0;
-	down(&ieee->wx_sem);
-	ieee80211_start_protocol(ieee);
-	up(&ieee->wx_sem);
-}
-
-void ieee80211_start_protocol(struct ieee80211_device *ieee)
-{
-	short ch = 0;
-	int i = 0;
-
-	if (ieee->proto_started)
-		return;
-
-	ieee->proto_started = 1;
-
-	if (ieee->current_network.channel == 0) {
-		do {
-			ch++;
-			if (ch > MAX_CHANNEL_NUMBER)
-				return; /* no channel found */
-
-		} while (!GET_DOT11D_INFO(ieee)->channel_map[ch]);
-
-		ieee->current_network.channel = ch;
-	}
-
-	if (ieee->current_network.beacon_interval == 0)
-		ieee->current_network.beacon_interval = 100;
-	ieee->set_chan(ieee->dev, ieee->current_network.channel);
-
-	for (i = 0; i < 17; i++) {
-		ieee->last_rxseq_num[i] = -1;
-		ieee->last_rxfrag_num[i] = -1;
-		ieee->last_packet_time[i] = 0;
-	}
-
-	ieee->init_wmmparam_flag = 0; /* reinitialize AC_xx_PARAM registers. */
-
-	/* if the user set the MAC of the ad-hoc cell and then
-	 * switch to managed mode, shall we  make sure that association
-	 * attempts does not fail just because the user provide the essid
-	 * and the nic is still checking for the AP MAC ??
-	 */
-	switch (ieee->iw_mode) {
-		case IW_MODE_AUTO:
-			ieee->iw_mode = IW_MODE_INFRA;
-			/* not set break here intentionly */
-		case IW_MODE_INFRA:
-			ieee80211_start_bss(ieee);
-			break;
-
-		case IW_MODE_ADHOC:
-			ieee80211_start_ibss(ieee);
-			break;
-
-		case IW_MODE_MASTER:
-			ieee80211_start_master_bss(ieee);
-		break;
-
-		case IW_MODE_MONITOR:
-			ieee80211_start_monitor_mode(ieee);
-			break;
-
-		default:
-			ieee->iw_mode = IW_MODE_INFRA;
-			ieee80211_start_bss(ieee);
-			break;
-	}
-}
-
-#define DRV_NAME  "Ieee80211"
-void ieee80211_softmac_init(struct ieee80211_device *ieee)
-{
-	int i;
-	memset(&ieee->current_network, 0, sizeof(struct ieee80211_network));
-
-	ieee->state = IEEE80211_NOLINK;
-	ieee->sync_scan_hurryup = 0;
-	for (i = 0; i < 5; i++)
-		ieee->seq_ctrl[i] = 0;
-
-	ieee->assoc_id = 0;
-	ieee->queue_stop = 0;
-	ieee->scanning = 0;
-	ieee->softmac_features = 0; /* so IEEE2100-like driver are happy */
-	ieee->wap_set = 0;
-	ieee->ssid_set = 0;
-	ieee->proto_started = 0;
-	ieee->basic_rate = IEEE80211_DEFAULT_BASIC_RATE;
-	ieee->rate = 3;
-	ieee->ps = IEEE80211_PS_MBCAST|IEEE80211_PS_UNICAST;
-	ieee->sta_sleep = 0;
-	ieee->bInactivePs = false;
-	ieee->actscanning = false;
-	ieee->ListenInterval = 2;
-	ieee->NumRxDataInPeriod = 0;
-	ieee->NumRxBcnInPeriod = 0;
-	ieee->NumRxOkTotal = 0;
-	ieee->NumRxUnicast = 0; /* for keep alive */
-	ieee->beinretry = false;
-	ieee->bHwRadioOff = false;
-
-	init_mgmt_queue(ieee);
-
-	ieee->tx_pending.txb = NULL;
-
-	init_timer(&ieee->associate_timer);
-	ieee->associate_timer.data = (unsigned long)ieee;
-	ieee->associate_timer.function = ieee80211_associate_abort_cb;
-
-	init_timer(&ieee->beacon_timer);
-	ieee->beacon_timer.data = (unsigned long) ieee;
-	ieee->beacon_timer.function = ieee80211_send_beacon_cb;
-
-	ieee->wq = create_workqueue(DRV_NAME);
-
-	INIT_DELAYED_WORK(&ieee->start_ibss_wq, (void *) ieee80211_start_ibss_wq);
-	INIT_WORK(&ieee->associate_complete_wq, (void *) ieee80211_associate_complete_wq);
-	INIT_WORK(&ieee->associate_procedure_wq, (void *) ieee80211_associate_procedure_wq);
-	INIT_DELAYED_WORK(&ieee->softmac_scan_wq, (void *) ieee80211_softmac_scan_wq);
-	INIT_DELAYED_WORK(&ieee->associate_retry_wq, (void *) ieee80211_associate_retry_wq);
-	INIT_WORK(&ieee->wx_sync_scan_wq, (void *) ieee80211_wx_sync_scan_wq);
-
-	sema_init(&ieee->wx_sem, 1);
-	sema_init(&ieee->scan_sem, 1);
-
-	spin_lock_init(&ieee->mgmt_tx_lock);
-	spin_lock_init(&ieee->beacon_lock);
-
-	tasklet_init(&ieee->ps_task,
-	     (void(*)(unsigned long)) ieee80211_sta_ps,
-	     (unsigned long)ieee);
-	ieee->pDot11dInfo = kmalloc(sizeof(RT_DOT11D_INFO), GFP_ATOMIC);
-}
-
-void ieee80211_softmac_free(struct ieee80211_device *ieee)
-{
-	down(&ieee->wx_sem);
-
-	del_timer_sync(&ieee->associate_timer);
-	cancel_delayed_work(&ieee->associate_retry_wq);
-
-	/* add for RF power on power of */
-	cancel_delayed_work(&ieee->GPIOChangeRFWorkItem);
-
-	destroy_workqueue(ieee->wq);
-	kfree(ieee->pDot11dInfo);
-	up(&ieee->wx_sem);
-}
-
-/* Start of WPA code. This is stolen from the ipw2200 driver  */
-static int ieee80211_wpa_enable(struct ieee80211_device *ieee, int value)
-{
-	/* This is called when wpa_supplicant loads and closes the driver
-	 * interface. */
-	printk("%s WPA\n", value ? "enabling" : "disabling");
-	ieee->wpa_enabled = value;
-	return 0;
-}
-
-static void ieee80211_wpa_assoc_frame(struct ieee80211_device *ieee, char *wpa_ie,
-			       int wpa_ie_len)
-{
-	/* make sure WPA is enabled */
-	ieee80211_wpa_enable(ieee, 1);
-
-	ieee80211_disassociate(ieee);
-}
-
-static int ieee80211_wpa_mlme(struct ieee80211_device *ieee, int command,
-			      int reason)
-{
-	int ret = 0;
-
-	switch (command) {
-	case IEEE_MLME_STA_DEAUTH:
-		/* silently ignore */
-		break;
-
-	case IEEE_MLME_STA_DISASSOC:
-		ieee80211_disassociate(ieee);
-		break;
-
-	default:
-		printk("Unknown MLME request: %d\n", command);
-		ret = -EOPNOTSUPP;
-	}
-
-	return ret;
-}
-
-static int ieee80211_wpa_set_wpa_ie(struct ieee80211_device *ieee,
-				    struct ieee_param *param, int plen)
-{
-	u8 *buf;
-
-	if (param->u.wpa_ie.len > MAX_WPA_IE_LEN ||
-	    (param->u.wpa_ie.len && param->u.wpa_ie.data == NULL))
-		return -EINVAL;
-
-	if (param->u.wpa_ie.len) {
-		buf = kmemdup(param->u.wpa_ie.data, param->u.wpa_ie.len,
-			      GFP_KERNEL);
-		if (buf == NULL)
-			return -ENOMEM;
-
-		kfree(ieee->wpa_ie);
-		ieee->wpa_ie = buf;
-		ieee->wpa_ie_len = param->u.wpa_ie.len;
-	} else {
-		kfree(ieee->wpa_ie);
-		ieee->wpa_ie = NULL;
-		ieee->wpa_ie_len = 0;
-	}
-
-	ieee80211_wpa_assoc_frame(ieee, ieee->wpa_ie, ieee->wpa_ie_len);
-	return 0;
-}
-
-#define AUTH_ALG_OPEN_SYSTEM			0x1
-#define AUTH_ALG_SHARED_KEY			0x2
-
-static int ieee80211_wpa_set_auth_algs(struct ieee80211_device *ieee, int value)
-{
-	struct ieee80211_security sec = {
-		.flags = SEC_AUTH_MODE,
-	};
-	int ret = 0;
-
-	if (value & AUTH_ALG_SHARED_KEY) {
-		sec.auth_mode = WLAN_AUTH_SHARED_KEY;
-		ieee->open_wep = 0;
-	} else {
-		sec.auth_mode = WLAN_AUTH_OPEN;
-		ieee->open_wep = 1;
-	}
-
-	if (ieee->set_security)
-		ieee->set_security(ieee->dev, &sec);
-	else
-		ret = -EOPNOTSUPP;
-
-	return ret;
-}
-
-static int ieee80211_wpa_set_param(struct ieee80211_device *ieee, u8 name,
-				   u32 value)
-{
-	int ret = 0;
-	unsigned long flags;
-
-	switch (name) {
-	case IEEE_PARAM_WPA_ENABLED:
-		ret = ieee80211_wpa_enable(ieee, value);
-		break;
-
-	case IEEE_PARAM_TKIP_COUNTERMEASURES:
-		ieee->tkip_countermeasures = value;
-		break;
-
-	case IEEE_PARAM_DROP_UNENCRYPTED: {
-		/* HACK:
-		 *
-		 * wpa_supplicant calls set_wpa_enabled when the driver
-		 * is loaded and unloaded, regardless of if WPA is being
-		 * used.  No other calls are made which can be used to
-		 * determine if encryption will be used or not prior to
-		 * association being expected.  If encryption is not being
-		 * used, drop_unencrypted is set to false, else true -- we
-		 * can use this to determine if the CAP_PRIVACY_ON bit should
-		 * be set.
-		 */
-		struct ieee80211_security sec = {
-			.flags = SEC_ENABLED,
-			.enabled = value,
-		};
-		ieee->drop_unencrypted = value;
-		/* We only change SEC_LEVEL for open mode. Others
-		 * are set by ipw_wpa_set_encryption.
-		 */
-		if (!value) {
-			sec.flags |= SEC_LEVEL;
-			sec.level = SEC_LEVEL_0;
-		} else {
-			sec.flags |= SEC_LEVEL;
-			sec.level = SEC_LEVEL_1;
-		}
-		if (ieee->set_security)
-			ieee->set_security(ieee->dev, &sec);
-		break;
-	}
-
-	case IEEE_PARAM_PRIVACY_INVOKED:
-		ieee->privacy_invoked = value;
-		break;
-	case IEEE_PARAM_AUTH_ALGS:
-		ret = ieee80211_wpa_set_auth_algs(ieee, value);
-		break;
-	case IEEE_PARAM_IEEE_802_1X:
-		ieee->ieee802_1x = value;
-		break;
-	case IEEE_PARAM_WPAX_SELECT:
-		spin_lock_irqsave(&ieee->wpax_suitlist_lock, flags);
-		ieee->wpax_type_set = 1;
-		ieee->wpax_type_notify = value;
-		spin_unlock_irqrestore(&ieee->wpax_suitlist_lock, flags);
-		break;
-	default:
-		printk("Unknown WPA param: %d\n", name);
-		ret = -EOPNOTSUPP;
-	}
-
-	return ret;
-}
-
-/* implementation borrowed from hostap driver */
-
-static int ieee80211_wpa_set_encryption(struct ieee80211_device *ieee,
-					struct ieee_param *param, int param_len)
-{
-	int ret = 0;
-
-	struct ieee80211_crypto_ops *ops;
-	struct ieee80211_crypt_data **crypt;
-
-	struct ieee80211_security sec = {
-		.flags = 0,
-	};
-
-	param->u.crypt.err = 0;
-	param->u.crypt.alg[IEEE_CRYPT_ALG_NAME_LEN - 1] = '\0';
-
-	if (param_len !=
-	    (int) ((char *) param->u.crypt.key - (char *) param) +
-	    param->u.crypt.key_len) {
-		printk("Len mismatch %d, %d\n", param_len,
-			       param->u.crypt.key_len);
-		return -EINVAL;
-	}
-	if (is_broadcast_ether_addr(param->sta_addr)) {
-		if (param->u.crypt.idx >= WEP_KEYS)
-			return -EINVAL;
-		crypt = &ieee->crypt[param->u.crypt.idx];
-	} else {
-		return -EINVAL;
-	}
-
-	if (strcmp(param->u.crypt.alg, "none") == 0) {
-		if (crypt) {
-			sec.enabled = 0;
-			/* FIXME FIXME */
-			sec.level = SEC_LEVEL_0;
-			sec.flags |= SEC_ENABLED | SEC_LEVEL;
-			ieee80211_crypt_delayed_deinit(ieee, crypt);
-		}
-		goto done;
-	}
-	sec.enabled = 1;
-	/* FIXME FIXME */
-	sec.flags |= SEC_ENABLED;
-
-	/* IPW HW cannot build TKIP MIC, host decryption still needed. */
-	if (!(ieee->host_encrypt || ieee->host_decrypt) &&
-	    strcmp(param->u.crypt.alg, "TKIP"))
-		goto skip_host_crypt;
-
-	ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
-	if (ops == NULL && strcmp(param->u.crypt.alg, "WEP") == 0)
-		ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
-	else if (ops == NULL && strcmp(param->u.crypt.alg, "TKIP") == 0)
-		ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
-	else if (ops == NULL && strcmp(param->u.crypt.alg, "CCMP") == 0)
-		ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
-	if (ops == NULL) {
-		printk("unknown crypto alg '%s'\n", param->u.crypt.alg);
-		param->u.crypt.err = IEEE_CRYPT_ERR_UNKNOWN_ALG;
-		ret = -EINVAL;
-		goto done;
-	}
-
-	if (*crypt == NULL || (*crypt)->ops != ops) {
-		struct ieee80211_crypt_data *new_crypt;
-
-		ieee80211_crypt_delayed_deinit(ieee, crypt);
-
-		new_crypt = kmalloc(sizeof(*new_crypt), GFP_KERNEL);
-		if (new_crypt == NULL) {
-			ret = -ENOMEM;
-			goto done;
-		}
-		memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data));
-		new_crypt->ops = ops;
-		if (new_crypt->ops)
-			new_crypt->priv =
-				new_crypt->ops->init(param->u.crypt.idx);
-
-		if (new_crypt->priv == NULL) {
-			kfree(new_crypt);
-			param->u.crypt.err = IEEE_CRYPT_ERR_CRYPT_INIT_FAILED;
-			ret = -EINVAL;
-			goto done;
-		}
-
-		*crypt = new_crypt;
-	}
-
-	if (param->u.crypt.key_len > 0 && (*crypt)->ops->set_key &&
-	    (*crypt)->ops->set_key(param->u.crypt.key,
-				   param->u.crypt.key_len, param->u.crypt.seq,
-				   (*crypt)->priv) < 0) {
-		printk("key setting failed\n");
-		param->u.crypt.err = IEEE_CRYPT_ERR_KEY_SET_FAILED;
-		ret = -EINVAL;
-		goto done;
-	}
-
- skip_host_crypt:
-	if (param->u.crypt.set_tx) {
-		ieee->tx_keyidx = param->u.crypt.idx;
-		sec.active_key = param->u.crypt.idx;
-		sec.flags |= SEC_ACTIVE_KEY;
-	} else
-		sec.flags &= ~SEC_ACTIVE_KEY;
-
-	if (param->u.crypt.alg != NULL) {
-		memcpy(sec.keys[param->u.crypt.idx],
-		       param->u.crypt.key,
-		       param->u.crypt.key_len);
-		sec.key_sizes[param->u.crypt.idx] = param->u.crypt.key_len;
-		sec.flags |= (1 << param->u.crypt.idx);
-
-		if (strcmp(param->u.crypt.alg, "WEP") == 0) {
-			sec.flags |= SEC_LEVEL;
-			sec.level = SEC_LEVEL_1;
-		} else if (strcmp(param->u.crypt.alg, "TKIP") == 0) {
-			sec.flags |= SEC_LEVEL;
-			sec.level = SEC_LEVEL_2;
-		} else if (strcmp(param->u.crypt.alg, "CCMP") == 0) {
-			sec.flags |= SEC_LEVEL;
-			sec.level = SEC_LEVEL_3;
-		}
-	}
- done:
-	if (ieee->set_security)
-		ieee->set_security(ieee->dev, &sec);
-
-	/* Do not reset port if card is in Managed mode since resetting will
-	 * generate new IEEE 802.11 authentication which may end up in looping
-	 * with IEEE 802.1X.  If your hardware requires a reset after WEP
-	 * configuration (for example... Prism2), implement the reset_port in
-	 * the callbacks structures used to initialize the 802.11 stack. */
-	if (ieee->reset_on_keychange &&
-	    ieee->iw_mode != IW_MODE_INFRA &&
-	    ieee->reset_port &&
-	    ieee->reset_port(ieee->dev)) {
-		printk("reset_port failed\n");
-		param->u.crypt.err = IEEE_CRYPT_ERR_CARD_CONF_FAILED;
-		return -EINVAL;
-	}
-
-	return ret;
-}
-
-int ieee80211_wpa_supplicant_ioctl(struct ieee80211_device *ieee,
-				   struct iw_point *p)
-{
-	struct ieee_param *param;
-	int ret = 0;
-
-	down(&ieee->wx_sem);
-
-	if (p->length < sizeof(struct ieee_param) || !p->pointer) {
-		ret = -EINVAL;
-		goto out;
-	}
-
-	param = memdup_user(p->pointer, p->length);
-	if (IS_ERR(param)) {
-		ret = PTR_ERR(param);
-		goto out;
-	}
-
-	switch (param->cmd) {
-	case IEEE_CMD_SET_WPA_PARAM:
-		ret = ieee80211_wpa_set_param(ieee, param->u.wpa_param.name,
-					param->u.wpa_param.value);
-		break;
-	case IEEE_CMD_SET_WPA_IE:
-		ret = ieee80211_wpa_set_wpa_ie(ieee, param, p->length);
-		break;
-	case IEEE_CMD_SET_ENCRYPTION:
-		ret = ieee80211_wpa_set_encryption(ieee, param, p->length);
-		break;
-	case IEEE_CMD_MLME:
-		ret = ieee80211_wpa_mlme(ieee, param->u.mlme.command,
-				   param->u.mlme.reason_code);
-		break;
-	default:
-		printk("Unknown WPA supplicant request: %d\n", param->cmd);
-		ret = -EOPNOTSUPP;
-		break;
-	}
-
-	if (ret == 0 && copy_to_user(p->pointer, param, p->length))
-		ret = -EFAULT;
-
-	kfree(param);
-out:
-	up(&ieee->wx_sem);
-
-	return ret;
-}
-
-void notify_wx_assoc_event(struct ieee80211_device *ieee)
-{
-	union iwreq_data wrqu;
-	wrqu.ap_addr.sa_family = ARPHRD_ETHER;
-	if (ieee->state == IEEE80211_LINKED)
-		memcpy(wrqu.ap_addr.sa_data, ieee->current_network.bssid, ETH_ALEN);
-	else
-		memset(wrqu.ap_addr.sa_data, 0, ETH_ALEN);
-	wireless_send_event(ieee->dev, SIOCGIWAP, &wrqu, NULL);
-}
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c
deleted file mode 100644
index 46f35644126c..000000000000
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c
+++ /dev/null
@@ -1,567 +0,0 @@
-/* IEEE 802.11 SoftMAC layer
- * Copyright (c) 2005 Andrea Merello <andrea.merello@gmail.com>
- *
- * Mostly extracted from the rtl8180-sa2400 driver for the
- * in-kernel generic ieee802.11 stack.
- *
- * Some pieces of code might be stolen from ipw2100 driver
- * copyright of who own it's copyright ;-)
- *
- * PS wx handler mostly stolen from hostap, copyright who
- * own it's copyright ;-)
- *
- * released under the GPL
- */
-
-
-#include <linux/etherdevice.h>
-
-#include "ieee80211.h"
-
-/* FIXME: add A freqs */
-
-const long ieee80211_wlan_frequencies[] = {
-	2412, 2417, 2422, 2427,
-	2432, 2437, 2442, 2447,
-	2452, 2457, 2462, 2467,
-	2472, 2484
-};
-
-
-int ieee80211_wx_set_freq(struct ieee80211_device *ieee,
-			  struct iw_request_info *a, union iwreq_data *wrqu,
-			  char *b)
-{
-	int ret;
-	struct iw_freq *fwrq = &wrqu->freq;
-//	printk("in %s\n",__func__);
-	down(&ieee->wx_sem);
-
-	if (ieee->iw_mode == IW_MODE_INFRA) {
-		ret = -EOPNOTSUPP;
-		goto out;
-	}
-
-	/* if setting by freq convert to channel */
-	if (fwrq->e == 1) {
-		if ((fwrq->m >= (int) 2.412e8 &&
-		     fwrq->m <= (int) 2.487e8)) {
-			int f = fwrq->m / 100000;
-			int c = 0;
-
-			while ((c < 14) && (f != ieee80211_wlan_frequencies[c]))
-				c++;
-
-			/* hack to fall through */
-			fwrq->e = 0;
-			fwrq->m = c + 1;
-		}
-	}
-
-	if (fwrq->e > 0 || fwrq->m > 14 || fwrq->m < 1) {
-		ret = -EOPNOTSUPP;
-		goto out;
-
-	} else { /* Set the channel */
-
-
-		ieee->current_network.channel = fwrq->m;
-		ieee->set_chan(ieee->dev, ieee->current_network.channel);
-
-		if (ieee->iw_mode == IW_MODE_ADHOC || ieee->iw_mode == IW_MODE_MASTER)
-			if (ieee->state == IEEE80211_LINKED) {
-				ieee80211_stop_send_beacons(ieee);
-				ieee80211_start_send_beacons(ieee);
-			}
-	}
-
-	ret = 0;
-out:
-	up(&ieee->wx_sem);
-	return ret;
-}
-
-
-int ieee80211_wx_get_freq(struct ieee80211_device *ieee,
-			  struct iw_request_info *a, union iwreq_data *wrqu,
-			  char *b)
-{
-	struct iw_freq *fwrq = &wrqu->freq;
-
-	if (ieee->current_network.channel == 0)
-		return -1;
-
-	fwrq->m = ieee->current_network.channel;
-	fwrq->e = 0;
-
-	return 0;
-}
-
-int ieee80211_wx_get_wap(struct ieee80211_device *ieee,
-			 struct iw_request_info *info, union iwreq_data *wrqu,
-			 char *extra)
-{
-	unsigned long flags;
-
-	wrqu->ap_addr.sa_family = ARPHRD_ETHER;
-
-	if (ieee->iw_mode == IW_MODE_MONITOR)
-		return -1;
-
-	/* We want avoid to give to the user inconsistent infos*/
-	spin_lock_irqsave(&ieee->lock, flags);
-
-	if (ieee->state != IEEE80211_LINKED &&
-		ieee->state != IEEE80211_LINKED_SCANNING &&
-		ieee->wap_set == 0)
-
-		memset(wrqu->ap_addr.sa_data, 0, ETH_ALEN);
-	else
-		memcpy(wrqu->ap_addr.sa_data,
-		       ieee->current_network.bssid, ETH_ALEN);
-
-	spin_unlock_irqrestore(&ieee->lock, flags);
-
-	return 0;
-}
-
-
-int ieee80211_wx_set_wap(struct ieee80211_device *ieee,
-			 struct iw_request_info *info, union iwreq_data *awrq,
-			 char *extra)
-{
-
-	int ret = 0;
-	unsigned long flags;
-
-	short ifup = ieee->proto_started;//dev->flags & IFF_UP;
-	struct sockaddr *temp = (struct sockaddr *)awrq;
-
-	//printk("=======Set WAP:");
-	ieee->sync_scan_hurryup = 1;
-
-	down(&ieee->wx_sem);
-	/* use ifconfig hw ether */
-	if (ieee->iw_mode == IW_MODE_MASTER) {
-		ret = -1;
-		goto out;
-	}
-
-	if (temp->sa_family != ARPHRD_ETHER) {
-		ret = -EINVAL;
-		goto out;
-	}
-
-	if (ifup)
-		ieee80211_stop_protocol(ieee);
-
-	/* just to avoid to give inconsistent infos in the
-	 * get wx method. not really needed otherwise
-	 */
-	spin_lock_irqsave(&ieee->lock, flags);
-
-	memcpy(ieee->current_network.bssid, temp->sa_data, ETH_ALEN);
-	ieee->wap_set = !is_zero_ether_addr(temp->sa_data);
-	//printk(" %x:%x:%x:%x:%x:%x\n", ieee->current_network.bssid[0],ieee->current_network.bssid[1],ieee->current_network.bssid[2],ieee->current_network.bssid[3],ieee->current_network.bssid[4],ieee->current_network.bssid[5]);
-
-	spin_unlock_irqrestore(&ieee->lock, flags);
-
-	if (ifup)
-		ieee80211_start_protocol(ieee);
-
-out:
-	up(&ieee->wx_sem);
-	return ret;
-}
-
-int ieee80211_wx_get_essid(struct ieee80211_device *ieee,
-			   struct iw_request_info *a, union iwreq_data *wrqu,
-			   char *b)
-{
-	int len, ret = 0;
-	unsigned long flags;
-
-	if (ieee->iw_mode == IW_MODE_MONITOR)
-		return -1;
-
-	/* We want avoid to give to the user inconsistent infos*/
-	spin_lock_irqsave(&ieee->lock, flags);
-
-	if (ieee->current_network.ssid[0] == '\0' ||
-		ieee->current_network.ssid_len == 0){
-		ret = -1;
-		goto out;
-	}
-
-	if (ieee->state != IEEE80211_LINKED &&
-		ieee->state != IEEE80211_LINKED_SCANNING &&
-		ieee->ssid_set == 0){
-		ret = -1;
-		goto out;
-	}
-	len = ieee->current_network.ssid_len;
-	wrqu->essid.length = len;
-	strncpy(b, ieee->current_network.ssid, len);
-	wrqu->essid.flags = 1;
-
-out:
-	spin_unlock_irqrestore(&ieee->lock, flags);
-
-	return ret;
-
-}
-
-int ieee80211_wx_set_rate(struct ieee80211_device *ieee,
-			  struct iw_request_info *info, union iwreq_data *wrqu,
-			  char *extra)
-{
-
-	u32 target_rate = wrqu->bitrate.value;
-
-	//added by lizhaoming for auto mode
-	if (target_rate == -1)
-		ieee->rate = 110;
-	else
-		ieee->rate = target_rate/100000;
-
-	//FIXME: we might want to limit rate also in management protocols.
-	return 0;
-}
-
-
-
-int ieee80211_wx_get_rate(struct ieee80211_device *ieee,
-			  struct iw_request_info *info, union iwreq_data *wrqu,
-			  char *extra)
-{
-
-	wrqu->bitrate.value = ieee->rate * 100000;
-
-	return 0;
-}
-
-int ieee80211_wx_set_mode(struct ieee80211_device *ieee,
-			  struct iw_request_info *a, union iwreq_data *wrqu,
-			  char *b)
-{
-
-	ieee->sync_scan_hurryup = 1;
-
-	down(&ieee->wx_sem);
-
-	if (wrqu->mode == ieee->iw_mode)
-		goto out;
-
-	if (wrqu->mode == IW_MODE_MONITOR)
-		ieee->dev->type = ARPHRD_IEEE80211;
-	else
-		ieee->dev->type = ARPHRD_ETHER;
-
-	if (!ieee->proto_started) {
-		ieee->iw_mode = wrqu->mode;
-	} else {
-		ieee80211_stop_protocol(ieee);
-		ieee->iw_mode = wrqu->mode;
-		ieee80211_start_protocol(ieee);
-	}
-
-out:
-	up(&ieee->wx_sem);
-	return 0;
-}
-
-
-void ieee80211_wx_sync_scan_wq(struct work_struct *work)
-{
-	struct ieee80211_device *ieee = container_of(work, struct ieee80211_device, wx_sync_scan_wq);
-	short chan;
-
-	chan = ieee->current_network.channel;
-
-	if (ieee->data_hard_stop)
-		ieee->data_hard_stop(ieee->dev);
-
-	ieee80211_stop_send_beacons(ieee);
-
-	ieee->state = IEEE80211_LINKED_SCANNING;
-	ieee->link_change(ieee->dev);
-
-	ieee80211_start_scan_syncro(ieee);
-
-	ieee->set_chan(ieee->dev, chan);
-
-	ieee->state = IEEE80211_LINKED;
-	ieee->link_change(ieee->dev);
-
-	if (ieee->data_hard_resume)
-		ieee->data_hard_resume(ieee->dev);
-
-	if (ieee->iw_mode == IW_MODE_ADHOC || ieee->iw_mode == IW_MODE_MASTER)
-		ieee80211_start_send_beacons(ieee);
-
-	//YJ,add,080828, In prevent of lossing ping packet during scanning
-	//ieee80211_sta_ps_send_null_frame(ieee, false);
-	//YJ,add,080828,end
-
-	up(&ieee->wx_sem);
-
-}
-
-int ieee80211_wx_set_scan(struct ieee80211_device *ieee,
-			  struct iw_request_info *a, union iwreq_data *wrqu,
-			  char *b)
-{
-	int ret = 0;
-
-	down(&ieee->wx_sem);
-
-	if (ieee->iw_mode == IW_MODE_MONITOR || !(ieee->proto_started)) {
-		ret = -1;
-		goto out;
-	}
-	//YJ,add,080828
-	//In prevent of lossing ping packet during scanning
-	//ieee80211_sta_ps_send_null_frame(ieee, true);
-	//YJ,add,080828,end
-
-	if (ieee->state == IEEE80211_LINKED) {
-		queue_work(ieee->wq, &ieee->wx_sync_scan_wq);
-		/* intentionally forget to up sem */
-		return 0;
-	}
-
-out:
-	up(&ieee->wx_sem);
-	return ret;
-}
-
-int ieee80211_wx_set_essid(struct ieee80211_device *ieee,
-			   struct iw_request_info *a, union iwreq_data *wrqu,
-			   char *extra)
-{
-
-	int ret = 0, len;
-	short proto_started;
-	unsigned long flags;
-
-	ieee->sync_scan_hurryup = 1;
-
-	down(&ieee->wx_sem);
-
-	proto_started = ieee->proto_started;
-
-	if (wrqu->essid.length > IW_ESSID_MAX_SIZE) {
-		ret = -E2BIG;
-		goto out;
-	}
-
-	if (ieee->iw_mode == IW_MODE_MONITOR) {
-		ret = -1;
-		goto out;
-	}
-
-	if (proto_started)
-		ieee80211_stop_protocol(ieee);
-
-	/* this is just to be sure that the GET wx callback
-	 * has consistent infos. not needed otherwise
-	 */
-	spin_lock_irqsave(&ieee->lock, flags);
-
-	if (wrqu->essid.flags && wrqu->essid.length) {
-//YJ,modified,080819
-		len = (wrqu->essid.length < IW_ESSID_MAX_SIZE) ? (wrqu->essid.length) : IW_ESSID_MAX_SIZE;
-		memset(ieee->current_network.ssid, 0, ieee->current_network.ssid_len); //YJ,add,080819
-		strncpy(ieee->current_network.ssid, extra, len);
-		ieee->current_network.ssid_len = len;
-		ieee->ssid_set = 1;
-//YJ,modified,080819,end
-
-		//YJ,add,080819,for hidden ap
-		if (len == 0) {
-			memset(ieee->current_network.bssid, 0, ETH_ALEN);
-			ieee->current_network.capability = 0;
-		}
-		//YJ,add,080819,for hidden ap,end
-	} else {
-		ieee->ssid_set = 0;
-		ieee->current_network.ssid[0] = '\0';
-		ieee->current_network.ssid_len = 0;
-	}
-	//printk("==========set essid %s!\n",ieee->current_network.ssid);
-	spin_unlock_irqrestore(&ieee->lock, flags);
-
-	if (proto_started)
-		ieee80211_start_protocol(ieee);
-out:
-	up(&ieee->wx_sem);
-	return ret;
-}
-
-int ieee80211_wx_get_mode(struct ieee80211_device *ieee,
-			  struct iw_request_info *a, union iwreq_data *wrqu,
-			  char *b)
-{
-
-	wrqu->mode = ieee->iw_mode;
-	return 0;
-}
-
-int ieee80211_wx_set_rawtx(struct ieee80211_device *ieee,
-			   struct iw_request_info *info, union iwreq_data *wrqu,
-			   char *extra)
-{
-
-	int *parms = (int *)extra;
-	int enable = (parms[0] > 0);
-	short prev = ieee->raw_tx;
-
-	down(&ieee->wx_sem);
-
-	if (enable)
-		ieee->raw_tx = 1;
-	else
-		ieee->raw_tx = 0;
-
-	netdev_info(ieee->dev, "raw TX is %s\n",
-		    ieee->raw_tx ? "enabled" : "disabled");
-
-	if (ieee->iw_mode == IW_MODE_MONITOR) {
-		if (prev == 0 && ieee->raw_tx) {
-			if (ieee->data_hard_resume)
-				ieee->data_hard_resume(ieee->dev);
-
-			netif_carrier_on(ieee->dev);
-		}
-
-		if (prev && ieee->raw_tx == 1)
-			netif_carrier_off(ieee->dev);
-	}
-
-	up(&ieee->wx_sem);
-
-	return 0;
-}
-
-int ieee80211_wx_get_name(struct ieee80211_device *ieee,
-			  struct iw_request_info *info, union iwreq_data *wrqu,
-			  char *extra)
-{
-	strlcpy(wrqu->name, "802.11", IFNAMSIZ);
-	if (ieee->modulation & IEEE80211_CCK_MODULATION) {
-		strlcat(wrqu->name, "b", IFNAMSIZ);
-		if (ieee->modulation & IEEE80211_OFDM_MODULATION)
-			strlcat(wrqu->name, "/g", IFNAMSIZ);
-	} else if (ieee->modulation & IEEE80211_OFDM_MODULATION)
-		strlcat(wrqu->name, "g", IFNAMSIZ);
-
-	if ((ieee->state == IEEE80211_LINKED) ||
-		(ieee->state == IEEE80211_LINKED_SCANNING))
-		strlcat(wrqu->name, "  link", IFNAMSIZ);
-	else if (ieee->state != IEEE80211_NOLINK)
-		strlcat(wrqu->name, " .....", IFNAMSIZ);
-
-
-	return 0;
-}
-
-
-/* this is mostly stolen from hostap */
-int ieee80211_wx_set_power(struct ieee80211_device *ieee,
-			   struct iw_request_info *info, union iwreq_data *wrqu,
-			   char *extra)
-{
-	int ret = 0;
-
-	if ((!ieee->sta_wake_up) ||
-	    (!ieee->ps_request_tx_ack) ||
-	    (!ieee->enter_sleep_state) ||
-	    (!ieee->ps_is_queue_empty)) {
-
-		printk("ERROR. PS mode tried to be use but driver missed a callback\n\n");
-
-		return -1;
-	}
-
-	down(&ieee->wx_sem);
-
-	if (wrqu->power.disabled) {
-		ieee->ps = IEEE80211_PS_DISABLED;
-
-		goto exit;
-	}
-	switch (wrqu->power.flags & IW_POWER_MODE) {
-	case IW_POWER_UNICAST_R:
-		ieee->ps = IEEE80211_PS_UNICAST;
-
-		break;
-	case IW_POWER_ALL_R:
-		ieee->ps = IEEE80211_PS_UNICAST | IEEE80211_PS_MBCAST;
-		break;
-
-	case IW_POWER_ON:
-		ieee->ps = IEEE80211_PS_DISABLED;
-		break;
-
-	default:
-		ret = -EINVAL;
-		goto exit;
-	}
-
-	if (wrqu->power.flags & IW_POWER_TIMEOUT) {
-
-		ieee->ps_timeout = wrqu->power.value / 1000;
-		printk("Timeout %d\n", ieee->ps_timeout);
-	}
-
-	if (wrqu->power.flags & IW_POWER_PERIOD) {
-
-		ret = -EOPNOTSUPP;
-		goto exit;
-		//wrq->value / 1024;
-
-	}
-exit:
-	up(&ieee->wx_sem);
-	return ret;
-
-}
-
-/* this is stolen from hostap */
-int ieee80211_wx_get_power(struct ieee80211_device *ieee,
-			   struct iw_request_info *info, union iwreq_data *wrqu,
-			   char *extra)
-{
-	int ret = 0;
-
-	down(&ieee->wx_sem);
-
-	if (ieee->ps == IEEE80211_PS_DISABLED) {
-		wrqu->power.disabled = 1;
-		goto exit;
-	}
-
-	wrqu->power.disabled = 0;
-
-//	if ((wrqu->power.flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) {
-		wrqu->power.flags = IW_POWER_TIMEOUT;
-		wrqu->power.value = ieee->ps_timeout * 1000;
-//	} else {
-//		ret = -EOPNOTSUPP;
-//		goto exit;
-		//wrqu->power.flags = IW_POWER_PERIOD;
-		//wrqu->power.value = ieee->current_network.dtim_period *
-		//	ieee->current_network.beacon_interval * 1024;
-//	}
-
-
-	if (ieee->ps & IEEE80211_PS_MBCAST)
-		wrqu->power.flags |= IW_POWER_ALL_R;
-	else
-		wrqu->power.flags |= IW_POWER_UNICAST_R;
-
-exit:
-	up(&ieee->wx_sem);
-	return ret;
-
-}
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c
deleted file mode 100644
index 0dc5ae414270..000000000000
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c
+++ /dev/null
@@ -1,591 +0,0 @@
-/******************************************************************************
-
-  Copyright(c) 2003 - 2004 Intel Corporation. All rights reserved.
-
-  This program is free software; you can redistribute it and/or modify it
-  under the terms of version 2 of the GNU General Public License as
-  published by the Free Software Foundation.
-
-  This program is distributed in the hope that it will be useful, but WITHOUT
-  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-  more details.
-
-  You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc., 59
-  Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-
-  The full GNU General Public License is included in this distribution in the
-  file called LICENSE.
-
-  Contact Information:
-  James P. Ketrenos <ipw2100-admin@linux.intel.com>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-******************************************************************************
-
-  Few modifications for Realtek's Wi-Fi drivers by
-  Andrea Merello <andrea.merello@gmail.com>
-
-  A special thanks goes to Realtek for their support !
-
-******************************************************************************/
-
-#include <linux/compiler.h>
-#include <linux/errno.h>
-#include <linux/if_arp.h>
-#include <linux/in6.h>
-#include <linux/in.h>
-#include <linux/ip.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/netdevice.h>
-#include <linux/pci.h>
-#include <linux/proc_fs.h>
-#include <linux/skbuff.h>
-#include <linux/slab.h>
-#include <linux/tcp.h>
-#include <linux/types.h>
-#include <linux/wireless.h>
-#include <linux/etherdevice.h>
-#include <asm/uaccess.h>
-#include <linux/if_vlan.h>
-
-#include "ieee80211.h"
-
-
-/*
-
-
-802.11 Data Frame
-
-
-802.11 frame_contorl for data frames - 2 bytes
-     ,-----------------------------------------------------------------------------------------.
-bits | 0  |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  a  |  b  |  c  |  d  |  e   |
-     |----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|------|
-val  | 0  |  0  |  0  |  1  |  x  |  0  |  0  |  0  |  1  |  0  |  x  |  x  |  x  |  x  |  x   |
-     |----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|------|
-desc | ^-ver-^  |  ^type-^  |  ^-----subtype-----^  | to  |from |more |retry| pwr |more |wep   |
-     |          |           | x=0 data,x=1 data+ack | DS  | DS  |frag |     | mgm |data |      |
-     '-----------------------------------------------------------------------------------------'
-		                                    /\
-                                                    |
-802.11 Data Frame                                   |
-           ,--------- 'ctrl' expands to >-----------'
-          |
-      ,--'---,-------------------------------------------------------------.
-Bytes |  2   |  2   |    6    |    6    |    6    |  2   | 0..2312 |   4  |
-      |------|------|---------|---------|---------|------|---------|------|
-Desc. | ctrl | dura |  DA/RA  |   TA    |    SA   | Sequ |  Frame  |  fcs |
-      |      | tion | (BSSID) |         |         | ence |  data   |      |
-      `--------------------------------------------------|         |------'
-Total: 28 non-data bytes                                 `----.----'
-                                                              |
-       .- 'Frame data' expands to <---------------------------'
-       |
-       V
-      ,---------------------------------------------------.
-Bytes |  1   |  1   |    1    |    3     |  2   |  0-2304 |
-      |------|------|---------|----------|------|---------|
-Desc. | SNAP | SNAP | Control |Eth Tunnel| Type | IP      |
-      | DSAP | SSAP |         |          |      | Packet  |
-      | 0xAA | 0xAA |0x03 (UI)|0x00-00-F8|      |         |
-      `-----------------------------------------|         |
-Total: 8 non-data bytes                         `----.----'
-                                                     |
-       .- 'IP Packet' expands, if WEP enabled, to <--'
-       |
-       V
-      ,-----------------------.
-Bytes |  4  |   0-2296  |  4  |
-      |-----|-----------|-----|
-Desc. | IV  | Encrypted | ICV |
-      |     | IP Packet |     |
-      `-----------------------'
-Total: 8 non-data bytes
-
-
-802.3 Ethernet Data Frame
-
-      ,-----------------------------------------.
-Bytes |   6   |   6   |  2   |  Variable |   4  |
-      |-------|-------|------|-----------|------|
-Desc. | Dest. | Source| Type | IP Packet |  fcs |
-      |  MAC  |  MAC  |      |           |      |
-      `-----------------------------------------'
-Total: 18 non-data bytes
-
-In the event that fragmentation is required, the incoming payload is split into
-N parts of size ieee->fts.  The first fragment contains the SNAP header and the
-remaining packets are just data.
-
-If encryption is enabled, each fragment payload size is reduced by enough space
-to add the prefix and postfix (IV and ICV totalling 8 bytes in the case of WEP)
-So if you have 1500 bytes of payload with ieee->fts set to 500 without
-encryption it will take 3 frames.  With WEP it will take 4 frames as the
-payload of each frame is reduced to 492 bytes.
-
-* SKB visualization
-*
-*  ,- skb->data
-* |
-* |    ETHERNET HEADER        ,-<-- PAYLOAD
-* |                           |     14 bytes from skb->data
-* |  2 bytes for Type --> ,T. |     (sizeof ethhdr)
-* |                       | | |
-* |,-Dest.--. ,--Src.---. | | |
-* |  6 bytes| | 6 bytes | | | |
-* v         | |         | | | |
-* 0         | v       1 | v | v           2
-* 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5
-*     ^     | ^         | ^ |
-*     |     | |         | | |
-*     |     | |         | `T' <---- 2 bytes for Type
-*     |     | |         |
-*     |     | '---SNAP--' <-------- 6 bytes for SNAP
-*     |     |
-*     `-IV--' <-------------------- 4 bytes for IV (WEP)
-*
-*      SNAP HEADER
-*
-*/
-
-static u8 P802_1H_OUI[P80211_OUI_LEN] = { 0x00, 0x00, 0xf8 };
-static u8 RFC1042_OUI[P80211_OUI_LEN] = { 0x00, 0x00, 0x00 };
-
-static inline int ieee80211_put_snap(u8 *data, u16 h_proto)
-{
-	struct ieee80211_snap_hdr *snap;
-	u8 *oui;
-
-	snap = (struct ieee80211_snap_hdr *)data;
-	snap->dsap = 0xaa;
-	snap->ssap = 0xaa;
-	snap->ctrl = 0x03;
-
-	if (h_proto == 0x8137 || h_proto == 0x80f3)
-		oui = P802_1H_OUI;
-	else
-		oui = RFC1042_OUI;
-	snap->oui[0] = oui[0];
-	snap->oui[1] = oui[1];
-	snap->oui[2] = oui[2];
-
-	*(u16 *)(data + SNAP_SIZE) = htons(h_proto);
-
-	return SNAP_SIZE + sizeof(u16);
-}
-
-int ieee80211_encrypt_fragment(struct ieee80211_device *ieee,
-			       struct sk_buff *frag, int hdr_len)
-{
-	struct ieee80211_crypt_data* crypt = ieee->crypt[ieee->tx_keyidx];
-	int res;
-
-	/*
-	 * added to care about null crypt condition, to solve that system hangs
-	 * when shared keys error
-	 */
-	if (!crypt || !crypt->ops)
-		return -1;
-
-#ifdef CONFIG_IEEE80211_CRYPT_TKIP
-	struct ieee80211_hdr_4addr *header;
-
-	if (ieee->tkip_countermeasures &&
-	    crypt && crypt->ops && strcmp(crypt->ops->name, "TKIP") == 0) {
-		header = (struct ieee80211_hdr_4addr *)frag->data;
-		if (net_ratelimit()) {
-			netdev_dbg(ieee->dev, "TKIP countermeasures: dropped "
-			       "TX packet to %pM\n", header->addr1);
-		}
-		return -1;
-	}
-#endif
-	/*
-	 * To encrypt, frame format is:
-	 * IV (4 bytes), clear payload (including SNAP), ICV (4 bytes)
-	 *
-	 * PR: FIXME: Copied from hostap. Check fragmentation/MSDU/MPDU
-	 * encryption.
-	 *
-	 * Host-based IEEE 802.11 fragmentation for TX is not yet supported, so
-	 * call both MSDU and MPDU encryption functions from here.
-	 */
-	atomic_inc(&crypt->refcnt);
-	res = 0;
-	if (crypt->ops->encrypt_msdu)
-		res = crypt->ops->encrypt_msdu(frag, hdr_len, crypt->priv);
-	if (res == 0 && crypt->ops->encrypt_mpdu)
-		res = crypt->ops->encrypt_mpdu(frag, hdr_len, crypt->priv);
-
-	atomic_dec(&crypt->refcnt);
-	if (res < 0) {
-		netdev_info(ieee->dev, "Encryption failed: len=%d.\n", frag->len);
-		ieee->ieee_stats.tx_discards++;
-		return -1;
-	}
-
-	return 0;
-}
-
-
-void ieee80211_txb_free(struct ieee80211_txb *txb)
-{
-	int i;
-	if (unlikely(!txb))
-		return;
-	for (i = 0; i < txb->nr_frags; i++)
-		if (txb->fragments[i])
-			dev_kfree_skb_any(txb->fragments[i]);
-	kfree(txb);
-}
-
-static struct ieee80211_txb *ieee80211_alloc_txb(int nr_frags, int txb_size,
-						 gfp_t gfp_mask)
-{
-	struct ieee80211_txb *txb;
-	int i;
-	txb = kmalloc(
-		sizeof(struct ieee80211_txb) + (sizeof(u8 *) * nr_frags),
-		gfp_mask);
-	if (!txb)
-		return NULL;
-
-	memset(txb, 0, sizeof(struct ieee80211_txb));
-	txb->nr_frags = nr_frags;
-	txb->frag_size = txb_size;
-
-	for (i = 0; i < nr_frags; i++) {
-		txb->fragments[i] = dev_alloc_skb(txb_size);
-		if (unlikely(!txb->fragments[i])) {
-			i--;
-			break;
-		}
-	}
-	if (unlikely(i != nr_frags)) {
-		while (i >= 0)
-			dev_kfree_skb_any(txb->fragments[i--]);
-		kfree(txb);
-		return NULL;
-	}
-	return txb;
-}
-
-/*
- * Classify the to-be send data packet
- * Need to acquire the sent queue index.
- */
-static int ieee80211_classify(struct sk_buff *skb,
-			      struct ieee80211_network *network)
-{
-	struct ether_header *eh = (struct ether_header *)skb->data;
-	unsigned int wme_UP = 0;
-
-	if (!network->QoS_Enable) {
-		skb->priority = 0;
-		return(wme_UP);
-	}
-
-	if (eh->ether_type == __constant_htons(ETHERTYPE_IP)) {
-		const struct iphdr *ih = (struct iphdr *)(skb->data +
-		    sizeof(struct ether_header));
-		wme_UP = (ih->tos >> 5)&0x07;
-	} else if (vlan_tx_tag_present(skb)) {/* vtag packet */
-#ifndef VLAN_PRI_SHIFT
-#define VLAN_PRI_SHIFT  13              /* Shift to find VLAN user priority */
-#define VLAN_PRI_MASK   7               /* Mask for user priority bits in VLAN */
-#endif
-		u32 tag = vlan_tx_tag_get(skb);
-		wme_UP = (tag >> VLAN_PRI_SHIFT) & VLAN_PRI_MASK;
-	} else if (ETH_P_PAE ==  ntohs(((struct ethhdr *)skb->data)->h_proto)) {
-		wme_UP = 7;
-	}
-
-	skb->priority = wme_UP;
-	return(wme_UP);
-}
-
-/* SKBs are added to the ieee->tx_queue. */
-int ieee80211_rtl_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	struct ieee80211_device *ieee = netdev_priv(dev);
-	struct ieee80211_txb *txb = NULL;
-	struct ieee80211_hdr_3addrqos *frag_hdr;
-	int i, bytes_per_frag, nr_frags, bytes_last_frag, frag_size;
-	unsigned long flags;
-	struct net_device_stats *stats = &ieee->stats;
-	int ether_type, encrypt;
-	int bytes, fc, qos_ctl, hdr_len;
-	struct sk_buff *skb_frag;
-	struct ieee80211_hdr_3addrqos header = { /* Ensure zero initialized */
-		.duration_id = 0,
-		.seq_ctl = 0,
-		.qos_ctl = 0
-	};
-	u8 dest[ETH_ALEN], src[ETH_ALEN];
-
-	struct ieee80211_crypt_data* crypt;
-
-	spin_lock_irqsave(&ieee->lock, flags);
-
-	/*
-	 * If there is no driver handler to take the TXB, don't bother
-	 * creating it...
-	 */
-	if ((!ieee->hard_start_xmit &&
-	     !(ieee->softmac_features & IEEE_SOFTMAC_TX_QUEUE)) ||
-	    ((!ieee->softmac_data_hard_start_xmit &&
-	      (ieee->softmac_features & IEEE_SOFTMAC_TX_QUEUE)))) {
-		netdev_warn(ieee->dev, "No xmit handler.\n");
-		goto success;
-	}
-
-	ieee80211_classify(skb,&ieee->current_network);
-	if (likely(ieee->raw_tx == 0)){
-
-		if (unlikely(skb->len < SNAP_SIZE + sizeof(u16))) {
-			netdev_warn(ieee->dev, "skb too small (%d).\n", skb->len);
-			goto success;
-		}
-
-		ether_type = ntohs(((struct ethhdr *)skb->data)->h_proto);
-
-		crypt = ieee->crypt[ieee->tx_keyidx];
-
-		encrypt = !(ether_type == ETH_P_PAE && ieee->ieee802_1x) &&
-			ieee->host_encrypt && crypt && crypt->ops;
-
-		if (!encrypt && ieee->ieee802_1x &&
-		ieee->drop_unencrypted && ether_type != ETH_P_PAE) {
-			stats->tx_dropped++;
-			goto success;
-		}
-
-	#ifdef CONFIG_IEEE80211_DEBUG
-		if (crypt && !encrypt && ether_type == ETH_P_PAE) {
-			struct eapol *eap = (struct eapol *)(skb->data +
-				sizeof(struct ethhdr) - SNAP_SIZE - sizeof(u16));
-			IEEE80211_DEBUG_EAP("TX: IEEE 802.11 EAPOL frame: %s\n",
-				eap_get_type(eap->type));
-		}
-	#endif
-
-		/* Save source and destination addresses */
-		memcpy(&dest, skb->data, ETH_ALEN);
-		memcpy(&src, skb->data+ETH_ALEN, ETH_ALEN);
-
-		/* Advance the SKB to the start of the payload */
-		skb_pull(skb, sizeof(struct ethhdr));
-
-		/* Determine total amount of storage required for TXB packets */
-		bytes = skb->len + SNAP_SIZE + sizeof(u16);
-
-		if (ieee->current_network.QoS_Enable) {
-			if (encrypt)
-				fc = IEEE80211_FTYPE_DATA | IEEE80211_STYPE_QOS_DATA |
-					IEEE80211_FCTL_WEP;
-			else
-				fc = IEEE80211_FTYPE_DATA | IEEE80211_STYPE_QOS_DATA;
-
-		} else {
-			if (encrypt)
-				fc = IEEE80211_FTYPE_DATA | IEEE80211_STYPE_DATA |
-					IEEE80211_FCTL_WEP;
-			else
-				fc = IEEE80211_FTYPE_DATA | IEEE80211_STYPE_DATA;
-		}
-
-		if (ieee->iw_mode == IW_MODE_INFRA) {
-			fc |= IEEE80211_FCTL_TODS;
-			/* To DS: Addr1 = BSSID, Addr2 = SA, Addr3 = DA */
-			memcpy(&header.addr1, ieee->current_network.bssid, ETH_ALEN);
-			memcpy(&header.addr2, &src, ETH_ALEN);
-			memcpy(&header.addr3, &dest, ETH_ALEN);
-		} else if (ieee->iw_mode == IW_MODE_ADHOC) {
-			/*
-			 * not From/To DS: Addr1 = DA, Addr2 = SA,
-			 * Addr3 = BSSID
-			 */
-			memcpy(&header.addr1, dest, ETH_ALEN);
-			memcpy(&header.addr2, src, ETH_ALEN);
-			memcpy(&header.addr3, ieee->current_network.bssid, ETH_ALEN);
-		}
-		header.frame_ctl = cpu_to_le16(fc);
-
-		/*
-		 * Determine fragmentation size based on destination (multicast
-		 * and broadcast are not fragmented)
-		 */
-		if (is_multicast_ether_addr(header.addr1)) {
-			frag_size = MAX_FRAG_THRESHOLD;
-			qos_ctl = QOS_CTL_NOTCONTAIN_ACK;
-		} else {
-			/* default:392 */
-			frag_size = ieee->fts;
-			qos_ctl = 0;
-		}
-
-		if (ieee->current_network.QoS_Enable)	{
-			hdr_len = IEEE80211_3ADDR_LEN + 2;
-			/* skb->priority is set in the ieee80211_classify() */
-			qos_ctl |= skb->priority;
-			header.qos_ctl = cpu_to_le16(qos_ctl);
-		} else {
-			hdr_len = IEEE80211_3ADDR_LEN;
-		}
-
-		/*
-		 * Determine amount of payload per fragment.  Regardless of if
-		 * this stack is providing the full 802.11 header, one will
-		 * eventually be affixed to this fragment -- so we must account
-		 * for it when determining the amount of payload space.
-		 */
-		bytes_per_frag = frag_size - hdr_len;
-		if (ieee->config &
-		(CFG_IEEE80211_COMPUTE_FCS | CFG_IEEE80211_RESERVE_FCS))
-			bytes_per_frag -= IEEE80211_FCS_LEN;
-
-		/* Each fragment may need to have room for encryption pre/postfix */
-		if (encrypt)
-			bytes_per_frag -= crypt->ops->extra_prefix_len +
-				crypt->ops->extra_postfix_len;
-
-		/*
-		 * Number of fragments is the total bytes_per_frag /
-		 * payload_per_fragment
-		 */
-		nr_frags = bytes / bytes_per_frag;
-		bytes_last_frag = bytes % bytes_per_frag;
-		if (bytes_last_frag)
-			nr_frags++;
-		else
-			bytes_last_frag = bytes_per_frag;
-
-		/*
-		 * When we allocate the TXB we allocate enough space for the 
-		 * reserve and full fragment bytes (bytes_per_frag doesn't
-		 * include prefix, postfix, header, FCS, etc.)
-		 */
-		txb = ieee80211_alloc_txb(nr_frags, frag_size, GFP_ATOMIC);
-		if (unlikely(!txb)) {
-			netdev_warn(ieee->dev, "Could not allocate TXB\n");
-			goto failed;
-		}
-		txb->encrypted = encrypt;
-		txb->payload_size = bytes;
-
-		for (i = 0; i < nr_frags; i++) {
-			skb_frag = txb->fragments[i];
-			skb_frag->priority = UP2AC(skb->priority);
-			if (encrypt)
-				skb_reserve(skb_frag, crypt->ops->extra_prefix_len);
-
-			frag_hdr = (struct ieee80211_hdr_3addrqos *)skb_put(
-				skb_frag, hdr_len);
-			memcpy(frag_hdr, &header, hdr_len);
-
-			/*
-			 * If this is not the last fragment, then add the MOREFRAGS
-			 * bit to the frame control
-			 */
-			if (i != nr_frags - 1) {
-				frag_hdr->frame_ctl = cpu_to_le16(
-					fc | IEEE80211_FCTL_MOREFRAGS);
-				bytes = bytes_per_frag;
-
-			} else {
-				/* The last fragment takes the remaining length */
-				bytes = bytes_last_frag;
-			}
-			if (ieee->current_network.QoS_Enable) {
-				/*
-				 * add 1 only indicate to corresponding seq
-				 * number control 2006/7/12
-				 */
-				frag_hdr->seq_ctl = cpu_to_le16(
-					ieee->seq_ctrl[UP2AC(skb->priority)+1]<<4 | i);
-			} else {
-				frag_hdr->seq_ctl = cpu_to_le16(
-					ieee->seq_ctrl[0]<<4 | i);
-			}
-
-			/* Put a SNAP header on the first fragment */
-			if (i == 0) {
-				ieee80211_put_snap(
-					skb_put(skb_frag, SNAP_SIZE + sizeof(u16)),
-					ether_type);
-				bytes -= SNAP_SIZE + sizeof(u16);
-			}
-
-			memcpy(skb_put(skb_frag, bytes), skb->data, bytes);
-
-			/* Advance the SKB... */
-			skb_pull(skb, bytes);
-
-			/*
-			 * Encryption routine will move the header forward in
-			 * order to insert the IV between the header and the
-			 * payload
-			 */
-			if (encrypt)
-				ieee80211_encrypt_fragment(ieee, skb_frag, hdr_len);
-			if (ieee->config &
-			(CFG_IEEE80211_COMPUTE_FCS | CFG_IEEE80211_RESERVE_FCS))
-				skb_put(skb_frag, 4);
-		}
-		/* Advance sequence number in data frame. */
-		if (ieee->current_network.QoS_Enable) {
-			if (ieee->seq_ctrl[UP2AC(skb->priority) + 1] == 0xFFF)
-				ieee->seq_ctrl[UP2AC(skb->priority) + 1] = 0;
-			else
-				ieee->seq_ctrl[UP2AC(skb->priority) + 1]++;
-		} else {
-			if (ieee->seq_ctrl[0] == 0xFFF)
-				ieee->seq_ctrl[0] = 0;
-			else
-				ieee->seq_ctrl[0]++;
-		}
-	} else {
-		if (unlikely(skb->len < sizeof(struct ieee80211_hdr_3addr))) {
-			netdev_warn(ieee->dev, "skb too small (%d).\n", skb->len);
-			goto success;
-		}
-
-		txb = ieee80211_alloc_txb(1, skb->len, GFP_ATOMIC);
-		if (!txb) {
-			netdev_warn(ieee->dev, "Could not allocate TXB\n");
-			goto failed;
-		}
-
-		txb->encrypted = 0;
-		txb->payload_size = skb->len;
-		memcpy(skb_put(txb->fragments[0], skb->len), skb->data, skb->len);
-	}
-
- success:
-	spin_unlock_irqrestore(&ieee->lock, flags);
-		dev_kfree_skb_any(skb);
-	if (txb) {
-		if (ieee->softmac_features & IEEE_SOFTMAC_TX_QUEUE) {
-			ieee80211_softmac_xmit(txb, ieee);
-		} else {
-			if ((*ieee->hard_start_xmit)(txb, dev) == 0) {
-				stats->tx_packets++;
-				stats->tx_bytes += txb->payload_size;
-				return NETDEV_TX_OK;
-			}
-			ieee80211_txb_free(txb);
-		}
-	}
-
-	return NETDEV_TX_OK;
-
- failed:
-	spin_unlock_irqrestore(&ieee->lock, flags);
-	netif_stop_queue(dev);
-	stats->tx_errors++;
-	return NETDEV_TX_BUSY;
-
-}
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c
deleted file mode 100644
index 07c3f715a6f5..000000000000
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c
+++ /dev/null
@@ -1,713 +0,0 @@
-/*
- *  Copyright(c) 2004 Intel Corporation. All rights reserved.
- *
- * Portions of this file are based on the WEP enablement code provided by the
- * Host AP project hostap-drivers v0.1.3
- * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
- * <jkmaline@cc.hut.fi>
- * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59
- * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- * James P. Ketrenos <ipw2100-admin@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- */
-
-#include <linux/wireless.h>
-#include <linux/kmod.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/etherdevice.h>
-
-#include "ieee80211.h"
-static const char *ieee80211_modes[] = {
-	"?", "a", "b", "ab", "g", "ag", "bg", "abg"
-};
-
-#define MAX_CUSTOM_LEN 64
-static inline char *rtl818x_translate_scan(struct ieee80211_device *ieee,
-					   char *start, char *stop,
-					   struct ieee80211_network *network,
-					   struct iw_request_info *info)
-{
-	char custom[MAX_CUSTOM_LEN];
-	char *p;
-	struct iw_event iwe;
-	int i, j;
-	u8 max_rate, rate;
-
-	/* First entry *MUST* be the AP MAC address */
-	iwe.cmd = SIOCGIWAP;
-	iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
-	ether_addr_copy(iwe.u.ap_addr.sa_data, network->bssid);
-	start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_ADDR_LEN);
-
-	/* Remaining entries will be displayed in the order we provide them */
-
-	/* Add the ESSID */
-	iwe.cmd = SIOCGIWESSID;
-	iwe.u.data.flags = 1;
-	if (network->ssid_len == 0) {
-		iwe.u.data.length = sizeof("<hidden>");
-		start = iwe_stream_add_point(info, start, stop, &iwe, "<hidden>");
-	} else {
-		iwe.u.data.length = min_t(u8, network->ssid_len, 32);
-		start = iwe_stream_add_point(info, start, stop, &iwe, network->ssid);
-	}
-	/* Add the protocol name */
-	iwe.cmd = SIOCGIWNAME;
-	snprintf(iwe.u.name, IFNAMSIZ, "IEEE 802.11%s", ieee80211_modes[network->mode]);
-	start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_CHAR_LEN);
-
-	/* Add mode */
-	iwe.cmd = SIOCGIWMODE;
-	if (network->capability &
-	    (WLAN_CAPABILITY_BSS | WLAN_CAPABILITY_IBSS)) {
-		if (network->capability & WLAN_CAPABILITY_BSS)
-			iwe.u.mode = IW_MODE_MASTER;
-		else
-			iwe.u.mode = IW_MODE_ADHOC;
-
-		start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_UINT_LEN);
-	}
-
-	/* Add frequency/channel */
-	iwe.cmd = SIOCGIWFREQ;
-	iwe.u.freq.m = network->channel;
-	iwe.u.freq.e = 0;
-	iwe.u.freq.i = 0;
-	start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_FREQ_LEN);
-
-	/* Add encryption capability */
-	iwe.cmd = SIOCGIWENCODE;
-	if (network->capability & WLAN_CAPABILITY_PRIVACY)
-		iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
-	else
-		iwe.u.data.flags = IW_ENCODE_DISABLED;
-	iwe.u.data.length = 0;
-	start = iwe_stream_add_point(info, start, stop, &iwe, network->ssid);
-
-	/* Add basic and extended rates */
-	max_rate = 0;
-	p = custom;
-	p += snprintf(p, MAX_CUSTOM_LEN - (p - custom), " Rates (Mb/s): ");
-	for (i = 0, j = 0; i < network->rates_len; ) {
-		if (j < network->rates_ex_len &&
-		    ((network->rates_ex[j] & 0x7F) <
-		     (network->rates[i] & 0x7F)))
-			rate = network->rates_ex[j++] & 0x7F;
-		else
-			rate = network->rates[i++] & 0x7F;
-		if (rate > max_rate)
-			max_rate = rate;
-		p += snprintf(p, MAX_CUSTOM_LEN - (p - custom),
-			      "%d%s ", rate >> 1, (rate & 1) ? ".5" : "");
-	}
-	for (; j < network->rates_ex_len; j++) {
-		rate = network->rates_ex[j] & 0x7F;
-		p += snprintf(p, MAX_CUSTOM_LEN - (p - custom),
-			      "%d%s ", rate >> 1, (rate & 1) ? ".5" : "");
-		if (rate > max_rate)
-			max_rate = rate;
-	}
-
-	iwe.cmd = SIOCGIWRATE;
-	iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0;
-	iwe.u.bitrate.value = max_rate * 500000;
-	start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_PARAM_LEN);
-
-	iwe.cmd = IWEVCUSTOM;
-	iwe.u.data.length = p - custom;
-	if (iwe.u.data.length)
-		start = iwe_stream_add_point(info, start, stop, &iwe, custom);
-
-	/* Add quality statistics */
-	/* TODO: Fix these values... */
-	if (network->stats.signal == 0 || network->stats.rssi == 0)
-		netdev_info(ieee->dev, "========>signal:%d, rssi:%d\n",
-			    network->stats.signal, network->stats.rssi);
-	iwe.cmd = IWEVQUAL;
-	iwe.u.qual.qual = network->stats.signalstrength;
-	iwe.u.qual.level = network->stats.signal;
-	iwe.u.qual.noise = network->stats.noise;
-	iwe.u.qual.updated = network->stats.mask & IEEE80211_STATMASK_WEMASK;
-	if (!(network->stats.mask & IEEE80211_STATMASK_RSSI))
-		iwe.u.qual.updated |= IW_QUAL_LEVEL_INVALID;
-	if (!(network->stats.mask & IEEE80211_STATMASK_NOISE))
-		iwe.u.qual.updated |= IW_QUAL_NOISE_INVALID;
-	if (!(network->stats.mask & IEEE80211_STATMASK_SIGNAL))
-		iwe.u.qual.updated |= IW_QUAL_QUAL_INVALID;
-	iwe.u.qual.updated = 7;
-	start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_QUAL_LEN);
-
-	iwe.cmd = IWEVCUSTOM;
-	p = custom;
-
-	iwe.u.data.length = p - custom;
-	if (iwe.u.data.length)
-		start = iwe_stream_add_point(info, start, stop, &iwe, custom);
-
-	memset(&iwe, 0, sizeof(iwe));
-	if (network->wpa_ie_len) {
-		char buf[MAX_WPA_IE_LEN];
-		memcpy(buf, network->wpa_ie, network->wpa_ie_len);
-		iwe.cmd = IWEVGENIE;
-		iwe.u.data.length = network->wpa_ie_len;
-		start = iwe_stream_add_point(info, start, stop, &iwe, buf);
-	}
-
-	memset(&iwe, 0, sizeof(iwe));
-	if (network->rsn_ie_len) {
-		char buf[MAX_WPA_IE_LEN];
-		memcpy(buf, network->rsn_ie, network->rsn_ie_len);
-		iwe.cmd = IWEVGENIE;
-		iwe.u.data.length = network->rsn_ie_len;
-		start = iwe_stream_add_point(info, start, stop, &iwe, buf);
-	}
-
-	/* Add EXTRA: Age to display seconds since last beacon/probe response
-	 * for given network.
-	 */
-	iwe.cmd = IWEVCUSTOM;
-	p = custom;
-	p += snprintf(p, MAX_CUSTOM_LEN - (p - custom),
-		      " Last beacon: %lums ago", (jiffies - network->last_scanned) / (HZ / 100));
-	iwe.u.data.length = p - custom;
-	if (iwe.u.data.length)
-		start = iwe_stream_add_point(info, start, stop, &iwe, custom);
-
-	return start;
-}
-
-int ieee80211_wx_get_scan(struct ieee80211_device *ieee,
-			  struct iw_request_info *info,
-			  union iwreq_data *wrqu, char *extra)
-{
-	struct ieee80211_network *network;
-	unsigned long flags;
-	int err = 0;
-	char *ev = extra;
-	char *stop = ev + wrqu->data.length;
-	int i = 0;
-
-	IEEE80211_DEBUG_WX("Getting scan\n");
-	down(&ieee->wx_sem);
-	spin_lock_irqsave(&ieee->lock, flags);
-
-	if (!ieee->bHwRadioOff) {
-		list_for_each_entry(network, &ieee->network_list, list) {
-			i++;
-
-			if ((stop-ev) < 200) {
-				err = -E2BIG;
-				break;
-			}
-			if (ieee->scan_age == 0 ||
-			    time_after(network->last_scanned + ieee->scan_age, jiffies)) {
-				ev = rtl818x_translate_scan(ieee, ev, stop, network, info);
-			} else
-				IEEE80211_DEBUG_SCAN(
-					"Not showing network '%s ("
-					"%pM)' due to age (%lums).\n",
-					escape_essid(network->ssid,
-						     network->ssid_len),
-					network->bssid,
-					(jiffies - network->last_scanned) / (HZ / 100));
-		}
-	}
-	spin_unlock_irqrestore(&ieee->lock, flags);
-	up(&ieee->wx_sem);
-	wrqu->data.length = ev -  extra;
-	wrqu->data.flags = 0;
-	IEEE80211_DEBUG_WX("exit: %d networks returned.\n", i);
-
-	return err;
-}
-
-int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu, char *keybuf)
-{
-	struct iw_point *erq = &(wrqu->encoding);
-	struct net_device *dev = ieee->dev;
-	struct ieee80211_security sec = {
-		.flags = 0
-	};
-	int i, key, key_provided, len;
-	struct ieee80211_crypt_data **crypt;
-
-	IEEE80211_DEBUG_WX("SET_ENCODE\n");
-
-	key = erq->flags & IW_ENCODE_INDEX;
-	if (key) {
-		if (key > WEP_KEYS)
-			return -EINVAL;
-		key--;
-		key_provided = 1;
-	} else {
-		key_provided = 0;
-		key = ieee->tx_keyidx;
-	}
-
-	IEEE80211_DEBUG_WX("Key: %d [%s]\n", key, key_provided ?
-			   "provided" : "default");
-
-	crypt = &ieee->crypt[key];
-
-	if (erq->flags & IW_ENCODE_DISABLED) {
-		if (key_provided && *crypt) {
-			IEEE80211_DEBUG_WX("Disabling encryption on key %d.\n",
-					   key);
-			ieee80211_crypt_delayed_deinit(ieee, crypt);
-		} else
-			IEEE80211_DEBUG_WX("Disabling encryption.\n");
-
-		/* Check all the keys to see if any are still configured,
-		 * and if no key index was provided, de-init them all.
-		 */
-		for (i = 0; i < WEP_KEYS; i++) {
-			if (ieee->crypt[i] != NULL) {
-				if (key_provided)
-					break;
-				ieee80211_crypt_delayed_deinit(
-					ieee, &ieee->crypt[i]);
-			}
-		}
-
-		if (i == WEP_KEYS) {
-			sec.enabled = 0;
-			sec.level = SEC_LEVEL_0;
-			sec.flags |= SEC_ENABLED | SEC_LEVEL;
-		}
-
-		goto done;
-	}
-
-	sec.enabled = 1;
-	sec.flags |= SEC_ENABLED;
-
-	if (*crypt != NULL && (*crypt)->ops != NULL &&
-	    strcmp((*crypt)->ops->name, "WEP") != 0) {
-		/* changing to use WEP; deinit previously used algorithm
-		 * on this key.
-		 */
-		ieee80211_crypt_delayed_deinit(ieee, crypt);
-	}
-
-	if (*crypt == NULL) {
-		struct ieee80211_crypt_data *new_crypt;
-
-		/* take WEP into use */
-		new_crypt = kzalloc(sizeof(struct ieee80211_crypt_data),
-				    GFP_KERNEL);
-		if (new_crypt == NULL)
-			return -ENOMEM;
-		new_crypt->ops = ieee80211_get_crypto_ops("WEP");
-		if (!new_crypt->ops)
-			new_crypt->ops = ieee80211_get_crypto_ops("WEP");
-
-		if (new_crypt->ops)
-			new_crypt->priv = new_crypt->ops->init(key);
-
-		if (!new_crypt->ops || !new_crypt->priv) {
-			kfree(new_crypt);
-			new_crypt = NULL;
-
-			netdev_warn(ieee->dev,
-				    "could not initialize WEP: load module ieee80211_crypt_wep\n");
-			return -EOPNOTSUPP;
-		}
-		*crypt = new_crypt;
-	}
-
-	/* If a new key was provided, set it up */
-	if (erq->length > 0) {
-		len = erq->length <= 5 ? 5 : 13;
-		memcpy(sec.keys[key], keybuf, erq->length);
-		if (len > erq->length)
-			memset(sec.keys[key] + erq->length, 0,
-			       len - erq->length);
-		IEEE80211_DEBUG_WX("Setting key %d to '%s' (%d:%d bytes)\n",
-				   key, escape_essid(sec.keys[key], len),
-				   erq->length, len);
-		sec.key_sizes[key] = len;
-		(*crypt)->ops->set_key(sec.keys[key], len, NULL,
-				       (*crypt)->priv);
-		sec.flags |= (1 << key);
-		/* This ensures a key will be activated if no key is
-		 * explicitly set.
-		 */
-		if (key == sec.active_key)
-			sec.flags |= SEC_ACTIVE_KEY;
-		ieee->tx_keyidx = key;
-	} else {
-		len = (*crypt)->ops->get_key(sec.keys[key], WEP_KEY_LEN,
-					     NULL, (*crypt)->priv);
-		if (len == 0) {
-			/* Set a default key of all 0 */
-			IEEE80211_DEBUG_WX("Setting key %d to all zero.\n",
-					   key);
-			memset(sec.keys[key], 0, 13);
-			(*crypt)->ops->set_key(sec.keys[key], 13, NULL,
-					       (*crypt)->priv);
-			sec.key_sizes[key] = 13;
-			sec.flags |= (1 << key);
-		}
-
-		/* No key data - just set the default TX key index */
-		if (key_provided) {
-			IEEE80211_DEBUG_WX(
-				"Setting key %d to default Tx key.\n", key);
-			ieee->tx_keyidx = key;
-			sec.active_key = key;
-			sec.flags |= SEC_ACTIVE_KEY;
-		}
-	}
-
- done:
-	ieee->open_wep = !(erq->flags & IW_ENCODE_RESTRICTED);
-	sec.auth_mode = ieee->open_wep ? WLAN_AUTH_OPEN : WLAN_AUTH_SHARED_KEY;
-	sec.flags |= SEC_AUTH_MODE;
-	IEEE80211_DEBUG_WX("Auth: %s\n", sec.auth_mode == WLAN_AUTH_OPEN ?
-			   "OPEN" : "SHARED KEY");
-
-	/* For now we just support WEP, so only set that security level...
-	 * TODO: When WPA is added this is one place that needs to change
-	 */
-	sec.flags |= SEC_LEVEL;
-	sec.level = SEC_LEVEL_1; /* 40 and 104 bit WEP */
-
-	if (ieee->set_security)
-		ieee->set_security(dev, &sec);
-
-	/* Do not reset port if card is in Managed mode since resetting will
-	 * generate new IEEE 802.11 authentication which may end up in looping
-	 * with IEEE 802.1X.  If your hardware requires a reset after WEP
-	 * configuration (for example... Prism2), implement the reset_port in
-	 * the callbacks structures used to initialize the 802.11 stack.
-	 */
-	if (ieee->reset_on_keychange &&
-	    ieee->iw_mode != IW_MODE_INFRA &&
-	    ieee->reset_port && ieee->reset_port(dev)) {
-		netdev_dbg(ieee->dev, "reset_port failed\n");
-		return -EINVAL;
-	}
-	return 0;
-}
-
-int ieee80211_wx_get_encode(struct ieee80211_device *ieee,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu, char *keybuf)
-{
-	struct iw_point *erq = &(wrqu->encoding);
-	int len, key;
-	struct ieee80211_crypt_data *crypt;
-
-	IEEE80211_DEBUG_WX("GET_ENCODE\n");
-
-	if (ieee->iw_mode == IW_MODE_MONITOR)
-		return -1;
-
-	key = erq->flags & IW_ENCODE_INDEX;
-	if (key) {
-		if (key > WEP_KEYS)
-			return -EINVAL;
-		key--;
-	} else
-		key = ieee->tx_keyidx;
-
-	crypt = ieee->crypt[key];
-	erq->flags = key + 1;
-
-	if (crypt == NULL || crypt->ops == NULL) {
-		erq->length = 0;
-		erq->flags |= IW_ENCODE_DISABLED;
-		return 0;
-	}
-
-	if (strcmp(crypt->ops->name, "WEP") != 0) {
-		/* only WEP is supported with wireless extensions, so just
-		 * report that encryption is used.
-		 */
-		erq->length = 0;
-		erq->flags |= IW_ENCODE_ENABLED;
-		return 0;
-	}
-
-	len = crypt->ops->get_key(keybuf, WEP_KEY_LEN, NULL, crypt->priv);
-	erq->length = (len >= 0 ? len : 0);
-
-	erq->flags |= IW_ENCODE_ENABLED;
-
-	if (ieee->open_wep)
-		erq->flags |= IW_ENCODE_OPEN;
-	else
-		erq->flags |= IW_ENCODE_RESTRICTED;
-
-	return 0;
-}
-
-int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee,
-				struct iw_request_info *info,
-				union iwreq_data *wrqu, char *extra)
-{
-	struct net_device *dev = ieee->dev;
-	struct iw_point *encoding = &wrqu->encoding;
-	struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
-	int i, idx, ret = 0;
-	int group_key = 0;
-	const char *alg;
-	struct ieee80211_crypto_ops *ops;
-	struct ieee80211_crypt_data **crypt;
-
-	struct ieee80211_security sec = {
-		.flags = 0,
-	};
-	idx = encoding->flags & IW_ENCODE_INDEX;
-	if (idx) {
-		if (idx < 1 || idx > WEP_KEYS)
-			return -EINVAL;
-		idx--;
-	} else
-		idx = ieee->tx_keyidx;
-
-	if (ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY) {
-		crypt = &ieee->crypt[idx];
-		group_key = 1;
-	} else {
-		/* some Cisco APs use idx>0 for unicast in dynamic WEP */
-		if (idx != 0 && ext->alg != IW_ENCODE_ALG_WEP)
-			return -EINVAL;
-		if (ieee->iw_mode == IW_MODE_INFRA)
-			crypt = &ieee->crypt[idx];
-		else
-			return -EINVAL;
-	}
-
-	sec.flags |= SEC_ENABLED;
-	if ((encoding->flags & IW_ENCODE_DISABLED) ||
-	    ext->alg == IW_ENCODE_ALG_NONE) {
-		if (*crypt)
-			ieee80211_crypt_delayed_deinit(ieee, crypt);
-
-		for (i = 0; i < WEP_KEYS; i++)
-			if (ieee->crypt[i] != NULL)
-				break;
-
-		if (i == WEP_KEYS) {
-			sec.enabled = 0;
-			sec.level = SEC_LEVEL_0;
-			sec.flags |= SEC_LEVEL;
-		}
-		goto done;
-	}
-
-	sec.enabled = 1;
-
-	switch (ext->alg) {
-	case IW_ENCODE_ALG_WEP:
-		alg = "WEP";
-		break;
-	case IW_ENCODE_ALG_TKIP:
-		alg = "TKIP";
-		break;
-	case IW_ENCODE_ALG_CCMP:
-		alg = "CCMP";
-		break;
-	default:
-		IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n",
-				   dev->name, ext->alg);
-		ret = -EINVAL;
-		goto done;
-	}
-
-	ops = ieee80211_get_crypto_ops(alg);
-	if (ops == NULL)
-		ops = ieee80211_get_crypto_ops(alg);
-	if (ops == NULL) {
-		IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n",
-				   dev->name, ext->alg);
-		netdev_err(ieee->dev, "========>unknown crypto alg %d\n",
-			   ext->alg);
-		ret = -EINVAL;
-		goto done;
-	}
-
-	if (*crypt == NULL || (*crypt)->ops != ops) {
-		struct ieee80211_crypt_data *new_crypt;
-
-		ieee80211_crypt_delayed_deinit(ieee, crypt);
-
-		new_crypt = kzalloc(sizeof(*new_crypt), GFP_KERNEL);
-		if (new_crypt == NULL) {
-			ret = -ENOMEM;
-			goto done;
-		}
-		new_crypt->ops = ops;
-		if (new_crypt->ops)
-			new_crypt->priv = new_crypt->ops->init(idx);
-		if (new_crypt->priv == NULL) {
-			kfree(new_crypt);
-			ret = -EINVAL;
-			goto done;
-		}
-		*crypt = new_crypt;
-
-	}
-
-	if (ext->key_len > 0 && (*crypt)->ops->set_key &&
-	    (*crypt)->ops->set_key(ext->key, ext->key_len, ext->rx_seq,
-				   (*crypt)->priv) < 0) {
-		IEEE80211_DEBUG_WX("%s: key setting failed\n", dev->name);
-		netdev_err(ieee->dev, "key setting failed\n");
-		ret = -EINVAL;
-		goto done;
-	}
-#if 1
-	if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) {
-		ieee->tx_keyidx = idx;
-		sec.active_key = idx;
-		sec.flags |= SEC_ACTIVE_KEY;
-	}
-
-	if (ext->alg != IW_ENCODE_ALG_NONE) {
-		memcpy(sec.keys[idx], ext->key, ext->key_len);
-		sec.key_sizes[idx] = ext->key_len;
-		sec.flags |= (1 << idx);
-		if (ext->alg == IW_ENCODE_ALG_WEP) {
-			sec.flags |= SEC_LEVEL;
-			sec.level = SEC_LEVEL_1;
-		} else if (ext->alg == IW_ENCODE_ALG_TKIP) {
-			sec.flags |= SEC_LEVEL;
-			sec.level = SEC_LEVEL_2;
-		} else if (ext->alg == IW_ENCODE_ALG_CCMP) {
-			sec.flags |= SEC_LEVEL;
-			sec.level = SEC_LEVEL_3;
-		}
-		/* Don't set sec level for group keys. */
-		if (group_key)
-			sec.flags &= ~SEC_LEVEL;
-	}
-#endif
-done:
-	if (ieee->set_security)
-		ieee->set_security(ieee->dev, &sec);
-
-	if (ieee->reset_on_keychange &&
-	    ieee->iw_mode != IW_MODE_INFRA &&
-	    ieee->reset_port && ieee->reset_port(dev)) {
-		IEEE80211_DEBUG_WX("%s: reset_port failed\n", dev->name);
-		return -EINVAL;
-	}
-
-	return ret;
-}
-
-int ieee80211_wx_set_mlme(struct ieee80211_device *ieee,
-			  struct iw_request_info *info,
-			  union iwreq_data *wrqu, char *extra)
-{
-	struct iw_mlme *mlme = (struct iw_mlme *) extra;
-#if 1
-	switch (mlme->cmd) {
-	case IW_MLME_DEAUTH:
-	case IW_MLME_DISASSOC:
-		ieee80211_disassociate(ieee);
-		break;
-	default:
-		return -EOPNOTSUPP;
-	}
-#endif
-	return 0;
-}
-
-int ieee80211_wx_set_auth(struct ieee80211_device *ieee,
-			  struct iw_request_info *info,
-			  struct iw_param *data, char *extra)
-{
-	switch (data->flags & IW_AUTH_INDEX) {
-	case IW_AUTH_WPA_VERSION:
-		/* need to support wpa2 here */
-		break;
-	case IW_AUTH_CIPHER_PAIRWISE:
-	case IW_AUTH_CIPHER_GROUP:
-	case IW_AUTH_KEY_MGMT:
-		/* Host AP driver does not use these parameters and allows
-		 * wpa_supplicant to control them internally.
-		 */
-		break;
-	case IW_AUTH_TKIP_COUNTERMEASURES:
-		ieee->tkip_countermeasures = data->value;
-		break;
-	case IW_AUTH_DROP_UNENCRYPTED:
-		ieee->drop_unencrypted = data->value;
-		break;
-
-	case IW_AUTH_80211_AUTH_ALG:
-		ieee->open_wep = (data->value&IW_AUTH_ALG_OPEN_SYSTEM) ? 1 : 0;
-		break;
-
-#if 1
-	case IW_AUTH_WPA_ENABLED:
-		ieee->wpa_enabled = (data->value) ? 1 : 0;
-		break;
-
-#endif
-	case IW_AUTH_RX_UNENCRYPTED_EAPOL:
-		ieee->ieee802_1x = data->value;
-		break;
-	case IW_AUTH_PRIVACY_INVOKED:
-		ieee->privacy_invoked = data->value;
-		break;
-	default:
-		return -EOPNOTSUPP;
-	}
-	return 0;
-}
-
-#if 1
-int ieee80211_wx_set_gen_ie(struct ieee80211_device *ieee, u8 *ie, size_t len)
-{
-	u8 *buf = NULL;
-
-	if (len > MAX_WPA_IE_LEN || (len && ie == NULL)) {
-		netdev_err(ieee->dev, "return error out, len:%zu\n", len);
-	return -EINVAL;
-	}
-
-	if (len) {
-		if (len != ie[1]+2) {
-			netdev_err(ieee->dev, "len:%zu, ie:%d\n", len, ie[1]);
-			return -EINVAL;
-		}
-		buf = kmemdup(ie, len, GFP_KERNEL);
-		if (buf == NULL)
-			return -ENOMEM;
-		kfree(ieee->wpa_ie);
-		ieee->wpa_ie = buf;
-		ieee->wpa_ie_len = len;
-	} else {
-		kfree(ieee->wpa_ie);
-		ieee->wpa_ie = NULL;
-		ieee->wpa_ie_len = 0;
-	}
-
-	return 0;
-
-}
-#endif
diff --git a/drivers/staging/rtl8187se/r8180.h b/drivers/staging/rtl8187se/r8180.h
deleted file mode 100644
index 9f931dba1d82..000000000000
--- a/drivers/staging/rtl8187se/r8180.h
+++ /dev/null
@@ -1,640 +0,0 @@
-/*
- * This is part of rtl8180 OpenSource driver.
- * Copyright (C) Andrea Merello 2004-2005  <andrea.merello@gmail.com>
- * Released under the terms of GPL (General Public Licence)
- *
- * Parts of this driver are based on the GPL part of the official realtek driver
- *
- * Parts of this driver are based on the rtl8180 driver skeleton from Patric
- * Schenke & Andres Salomon
- *
- * Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver
- *
- * We want to thanks the Authors of those projects and the Ndiswrapper project
- * Authors.
- */
-
-#ifndef R8180H
-#define R8180H
-
-#include <linux/interrupt.h>
-
-#define RTL8180_MODULE_NAME "r8180"
-#define DMESG(x, a...) printk(KERN_INFO RTL8180_MODULE_NAME ": " x "\n", ## a)
-#define DMESGW(x, a...) printk(KERN_WARNING RTL8180_MODULE_NAME ": WW:" x "\n", ## a)
-#define DMESGE(x, a...) printk(KERN_WARNING RTL8180_MODULE_NAME ": EE:" x "\n", ## a)
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/netdevice.h>
-#include <linux/pci.h>
-#include <linux/etherdevice.h>
-#include <linux/delay.h>
-#include <linux/rtnetlink.h> /* for rtnl_lock() */
-#include <linux/wireless.h>
-#include <linux/timer.h>
-#include <linux/proc_fs.h> /* Necessary because we use the proc fs. */
-#include <linux/if_arp.h>
-#include "ieee80211/ieee80211.h"
-#include <asm/io.h>
-
-#define EPROM_93c46 0
-#define EPROM_93c56 1
-
-#define RTL_IOCTL_WPA_SUPPLICANT (SIOCIWFIRSTPRIV + 30)
-
-#define DEFAULT_FRAG_THRESHOLD 2342U
-#define MIN_FRAG_THRESHOLD 256U
-#define DEFAULT_RTS_THRESHOLD 2342U
-#define MIN_RTS_THRESHOLD 0U
-#define MAX_RTS_THRESHOLD 2342U
-#define DEFAULT_BEACONINTERVAL 0x64U
-
-#define DEFAULT_RETRY_RTS 7
-#define DEFAULT_RETRY_DATA 7
-
-#define BEACON_QUEUE 6
-
-#define aSifsTime 10
-
-#define sCrcLng 4
-#define sAckCtsLng 112 /* bits in ACK and CTS frames. */
-/* +by amy 080312. */
-#define RATE_ADAPTIVE_TIMER_PERIOD 300
-
-enum wireless_mode {
-	WIRELESS_MODE_UNKNOWN = 0x00,
-	WIRELESS_MODE_A = 0x01,
-	WIRELESS_MODE_B = 0x02,
-	WIRELESS_MODE_G = 0x04,
-	WIRELESS_MODE_AUTO = 0x08,
-};
-
-struct chnl_access_setting {
-	u16 sifs_timer;
-	u16 difs_timer;
-	u16 slot_time_timer;
-	u16 eifs_timer;
-	u16 cwmin_index;
-	u16 cwmax_index;
-};
-
-enum nic_t {
-	NIC_8185 = 1,
-	NIC_8185B
-};
-
-typedef u32 AC_CODING;
-#define AC0_BE	0 /* ACI: 0x00 */ /* Best Effort. */
-#define AC1_BK	1 /* ACI: 0x01 */ /* Background. */
-#define AC2_VI	2 /* ACI: 0x10 */ /* Video. */
-#define AC3_VO	3 /* ACI: 0x11 */ /* Voice. */
-#define AC_MAX	4 /* Max: define total number; Should not to be used as a real
-		   * enum.
-		   */
-
-/*
- * ECWmin/ECWmax field.
- * Ref: WMM spec 2.2.2: WME Parameter Element, p.13.
- */
-typedef union _ECW {
-	u8 charData;
-	struct {
-		u8 ECWmin:4;
-		u8 ECWmax:4;
-	} f;	/* Field */
-} ECW, *PECW;
-
-/*
- * ACI/AIFSN Field. Ref: WMM spec 2.2.2: WME Parameter Element, p.12.
- */
-typedef union _ACI_AIFSN {
-	u8 charData;
-
-	struct {
-		u8 AIFSN:4;
-		u8 ACM:1;
-		u8 ACI:2;
-		u8 Reserved:1;
-	} f;	/* Field */
-} ACI_AIFSN, *PACI_AIFSN;
-
-/*
- * AC Parameters Record Format.
- * Ref: WMM spec 2.2.2: WME Parameter Element, p.12.
- */
-typedef union _AC_PARAM {
-	u32 longData;
-	u8 charData[4];
-
-	struct {
-		ACI_AIFSN AciAifsn;
-		ECW Ecw;
-		u16 TXOPLimit;
-	} f;	/* Field */
-} AC_PARAM, *PAC_PARAM;
-
-struct buffer {
-	struct buffer *next;
-	u32 *buf;
-	dma_addr_t dma;
-};
-
-/* YJ,modified,080828. */
-struct stats {
-	unsigned long txrdu;
-	unsigned long rxrdu;
-	unsigned long rxnolast;
-	unsigned long rxnodata;
-	unsigned long rxnopointer;
-	unsigned long txnperr;
-	unsigned long txresumed;
-	unsigned long rxerr;
-	unsigned long rxoverflow;
-	unsigned long rxint;
-	unsigned long txbkpokint;
-	unsigned long txbepoking;
-	unsigned long txbkperr;
-	unsigned long txbeperr;
-	unsigned long txnpokint;
-	unsigned long txhpokint;
-	unsigned long txhperr;
-	unsigned long ints;
-	unsigned long shints;
-	unsigned long txoverflow;
-	unsigned long rxdmafail;
-	unsigned long txbeacon;
-	unsigned long txbeaconerr;
-	unsigned long txlpokint;
-	unsigned long txlperr;
-	unsigned long txretry; /* retry number tony 20060601 */
-	unsigned long rxcrcerrmin; /* crc error (0-500) */
-	unsigned long rxcrcerrmid; /* crc error (500-1000) */
-	unsigned long rxcrcerrmax; /* crc error (>1000) */
-	unsigned long rxicverr; /* ICV error */
-};
-
-#define MAX_LD_SLOT_NUM 10
-#define KEEP_ALIVE_INTERVAL 20 /* in seconds. */
-#define CHECK_FOR_HANG_PERIOD 2 /* be equal to watchdog check time. */
-#define DEFAULT_KEEP_ALIVE_LEVEL 1
-#define DEFAULT_SLOT_NUM 2
-#define POWER_PROFILE_AC 0
-#define POWER_PROFILE_BATTERY 1
-
-struct link_detect_t {
-	u32 rx_frame_num[MAX_LD_SLOT_NUM]; /* number of Rx Frame.
-					    * CheckForHang_period  to determine
-					    * link status.
-					    */
-	u16 slot_num; /* number of CheckForHang period to determine link status,
-		       * default is 2.
-		       */
-	u16 slot_index;
-	u32 num_tx_ok_in_period; /* number of packet transmitted during
-				  * CheckForHang.
-				  */
-	u32 num_rx_ok_in_period; /* number of packet received during
-				  * CheckForHang.
-				  */
-	u8 idle_count; /* (KEEP_ALIVE_INTERVAL / CHECK_FOR_HANG_PERIOD) */
-	u32 last_num_tx_unicast;
-	u32 last_num_rx_unicast;
-
-	bool b_busy_traffic; /* when it is set to 1, UI cann't scan at will. */
-};
-
-/* YJ,modified,080828,end */
-
-/* by amy for led
- * ==========================================================================
- * LED customization.
- * ==========================================================================
- */
-enum led_strategy_8185 {
-	SW_LED_MODE0,
-	SW_LED_MODE1,
-	HW_LED, /* HW control 2 LEDs, LED0 and LED1 (there are 4 different
-		 * control modes). */
-};
-
-enum rt_rf_power_state {
-	RF_ON,
-	RF_SLEEP,
-	RF_OFF
-};
-
-enum _ReasonCode {
-	unspec_reason = 0x1,
-	auth_not_valid = 0x2,
-	deauth_lv_ss = 0x3,
-	inactivity = 0x4,
-	ap_overload = 0x5,
-	class2_err = 0x6,
-	class3_err = 0x7,
-	disas_lv_ss = 0x8,
-	asoc_not_auth = 0x9,
-
-	/* ----MIC_CHECK */
-	mic_failure = 0xe,
-	/* ----END MIC_CHECK */
-
-	/* Reason code defined in 802.11i D10.0 p.28. */
-	invalid_IE = 0x0d,
-	four_way_tmout = 0x0f,
-	two_way_tmout = 0x10,
-	IE_dismatch = 0x11,
-	invalid_Gcipher	= 0x12,
-	invalid_Pcipher	= 0x13,
-	invalid_AKMP = 0x14,
-	unsup_RSNIEver = 0x15,
-	invalid_RSNIE = 0x16,
-	auth_802_1x_fail = 0x17,
-	ciper_reject = 0x18,
-
-	/* Reason code defined in 7.3.1.7, 802.1e D13.0, p.42. Added by Annie,
-	 * 2005-11-15.
-	 */
-	QoS_unspec = 0x20, /* 32 */
-	QAP_bandwidth = 0x21, /* 33 */
-	poor_condition = 0x22, /* 34 */
-	no_facility = 0x23, /* 35 */
-	/* Where is 36??? */
-	req_declined = 0x25, /* 37 */
-	invalid_param = 0x26, /* 38 */
-	req_not_honored = 0x27, /* 39 */
-	TS_not_created = 0x2F, /* 47 */
-	DL_not_allowed = 0x30, /* 48 */
-	dest_not_exist = 0x31, /* 49 */
-	dest_not_QSTA = 0x32, /* 50 */
-};
-
-enum rt_ps_mode {
-	ACTIVE, /* Active/Continuous access. */
-	MAX_PS,	/* Max power save mode. */
-	FAST_PS /* Fast power save mode. */
-};
-
-/* by amy for power save. */
-struct r8180_priv {
-	struct pci_dev *pdev;
-
-	short epromtype;
-	int irq;
-	struct ieee80211_device *ieee80211;
-
-	short plcp_preamble_mode; /* 0:auto 1:short 2:long */
-
-	spinlock_t irq_th_lock;
-	spinlock_t tx_lock;
-	spinlock_t ps_lock;
-	spinlock_t rf_ps_lock;
-
-	u16 irq_mask;
-	short irq_enabled;
-	struct net_device *dev;
-	short chan;
-	short sens;
-	short max_sens;
-	u8 chtxpwr[15]; /* channels from 1 to 14, 0 not used. */
-	u8 chtxpwr_ofdm[15]; /* channels from 1 to 14, 0 not used. */
-	u8 channel_plan;  /* it's the channel plan index. */
-	short up;
-	short crcmon; /* if 1 allow bad crc frame reception in monitor mode. */
-
-	struct timer_list scan_timer;
-	spinlock_t scan_lock;
-	u8 active_probe;
-	struct semaphore wx_sem;
-	short hw_wep;
-
-	short digphy;
-	short antb;
-	short diversity;
-	u32 key0[4];
-	short (*rf_set_sens)(struct net_device *dev, short sens);
-	void (*rf_set_chan)(struct net_device *dev, short ch);
-	void (*rf_close)(struct net_device *dev);
-	void (*rf_init)(struct net_device *dev);
-	void (*rf_sleep)(struct net_device *dev);
-	void (*rf_wakeup)(struct net_device *dev);
-	/* short rate; */
-	short promisc;
-	/* stats */
-	struct stats stats;
-	struct link_detect_t link_detect; /* YJ,add,080828 */
-	struct iw_statistics wstats;
-
-	/* RX stuff. */
-	u32 *rxring;
-	u32 *rxringtail;
-	dma_addr_t rxringdma;
-	struct buffer *rxbuffer;
-	struct buffer *rxbufferhead;
-	int rxringcount;
-	u16 rxbuffersize;
-
-	struct sk_buff *rx_skb;
-
-	short rx_skb_complete;
-
-	u32 rx_prevlen;
-
-	u32 *txmapring;
-	u32 *txbkpring;
-	u32 *txbepring;
-	u32 *txvipring;
-	u32 *txvopring;
-	u32 *txhpring;
-	dma_addr_t txmapringdma;
-	dma_addr_t txbkpringdma;
-	dma_addr_t txbepringdma;
-	dma_addr_t txvipringdma;
-	dma_addr_t txvopringdma;
-	dma_addr_t txhpringdma;
-	u32 *txmapringtail;
-	u32 *txbkpringtail;
-	u32 *txbepringtail;
-	u32 *txvipringtail;
-	u32 *txvopringtail;
-	u32 *txhpringtail;
-	u32 *txmapringhead;
-	u32 *txbkpringhead;
-	u32 *txbepringhead;
-	u32 *txvipringhead;
-	u32 *txvopringhead;
-	u32 *txhpringhead;
-	struct buffer *txmapbufs;
-	struct buffer *txbkpbufs;
-	struct buffer *txbepbufs;
-	struct buffer *txvipbufs;
-	struct buffer *txvopbufs;
-	struct buffer *txhpbufs;
-	struct buffer *txmapbufstail;
-	struct buffer *txbkpbufstail;
-	struct buffer *txbepbufstail;
-	struct buffer *txvipbufstail;
-	struct buffer *txvopbufstail;
-	struct buffer *txhpbufstail;
-
-	int txringcount;
-	int txbuffsize;
-	struct tasklet_struct irq_rx_tasklet;
-	u8 dma_poll_mask;
-
-	/* adhoc/master mode stuff. */
-	u32 *txbeaconringtail;
-	dma_addr_t txbeaconringdma;
-	u32 *txbeaconring;
-	int txbeaconcount;
-	struct buffer *txbeaconbufs;
-	struct buffer *txbeaconbufstail;
-
-	u8 retry_data;
-	u8 retry_rts;
-	u16 rts;
-
-	/* by amy for led. */
-	enum led_strategy_8185 led_strategy;
-	/* by amy for led. */
-
-	/* by amy for power save. */
-	struct timer_list watch_dog_timer;
-	bool bInactivePs;
-	bool bSwRfProcessing;
-	enum rt_rf_power_state eInactivePowerState;
-	enum rt_rf_power_state eRFPowerState;
-	u32 RfOffReason;
-	bool RFChangeInProgress;
-	bool SetRFPowerStateInProgress;
-	u8 RFProgType;
-	bool bLeisurePs;
-	enum rt_ps_mode dot11PowerSaveMode;
-	u8 TxPollingTimes;
-
-	bool bApBufOurFrame; /* TRUE if AP buffer our unicast data , we will
-			      * keep eAwake until receive data or timeout.
-			      */
-	u8 WaitBufDataBcnCount;
-	u8 WaitBufDataTimeOut;
-
-	/* by amy for power save. */
-	/* by amy for antenna. */
-	u8 EEPROMSwAntennaDiversity;
-	bool EEPROMDefaultAntenna1;
-	u8 RegSwAntennaDiversityMechanism;
-	bool bSwAntennaDiverity;
-	u8 RegDefaultAntenna;
-	bool bDefaultAntenna1;
-	u8 SignalStrength;
-	long Stats_SignalStrength;
-	long LastSignalStrengthInPercent; /* In percentage, used for smoothing,
-					   * e.g. Moving Average.
-					   */
-	u8 SignalQuality; /* in 0-100 index. */
-	long Stats_SignalQuality;
-	long RecvSignalPower; /* in dBm. */
-	long Stats_RecvSignalPower;
-	u8 LastRxPktAntenna; /* +by amy 080312 Antenna which received the lasted
-			      * packet. 0: Aux, 1:Main. Added by Roger,
-			      * 2008.01.25.
-			      */
-	u32 AdRxOkCnt;
-	long AdRxSignalStrength;
-	u8 CurrAntennaIndex; /* Index to current Antenna (both Tx and Rx). */
-	u8 AdTickCount; /* Times of SwAntennaDiversityTimer happened. */
-	u8 AdCheckPeriod; /* # of period SwAntennaDiversityTimer to check Rx
-			   * signal strength for SW Antenna Diversity.
-			   */
-	u8 AdMinCheckPeriod; /* Min value of AdCheckPeriod. */
-	u8 AdMaxCheckPeriod; /* Max value of AdCheckPeriod. */
-	long AdRxSsThreshold; /* Signal strength threshold to switch antenna. */
-	long AdMaxRxSsThreshold; /* Max value of AdRxSsThreshold. */
-	bool bAdSwitchedChecking; /* TRUE if we shall shall check Rx signal
-				   * strength for last time switching antenna.
-				   */
-	long AdRxSsBeforeSwitched; /* Rx signal strength before we switched
-				    * antenna.
-				    */
-	struct timer_list SwAntennaDiversityTimer;
-	/* by amy for antenna {by amy 080312 */
-
-	/* Crystal calibration. Added by Roger, 2007.12.11. */
-
-	bool bXtalCalibration; /* Crystal calibration.*/
-	u8 XtalCal_Xin; /* Crystal calibration for Xin. 0~7.5pF */
-	u8 XtalCal_Xout; /* Crystal calibration for Xout. 0~7.5pF */
-
-	/* Tx power tracking with thermal meter indication.
-	 * Added by Roger, 2007.12.11.
-	 */
-
-	bool bTxPowerTrack; /* Tx Power tracking. */
-	u8 ThermalMeter; /* Thermal meter reference indication. */
-
-	/* Dynamic Initial Gain Adjustment Mechanism. Added by Bruce,
-	 * 2007-02-14.
-	 */
-	bool bDigMechanism; /* TRUE if DIG is enabled, FALSE ow. */
-	bool bRegHighPowerMechanism; /* For High Power Mechanism. 061010,
-				      * by rcnjko.
-				      */
-	u32 FalseAlarmRegValue;
-	u8 RegDigOfdmFaUpTh; /* Upper threshold of OFDM false alarm, which is
-			      * used in DIG.
-			      */
-	u8 DIG_NumberFallbackVote;
-	u8 DIG_NumberUpgradeVote;
-	/* For HW antenna diversity, added by Roger, 2008.01.30. */
-	u32 AdMainAntennaRxOkCnt; /* Main antenna Rx OK count. */
-	u32 AdAuxAntennaRxOkCnt; /* Aux antenna Rx OK count. */
-	bool bHWAdSwitched; /* TRUE if we has switched default antenna by HW
-			     * evaluation.
-			     */
-	/* RF High Power upper/lower threshold. */
-	u8 RegHiPwrUpperTh;
-	u8 RegHiPwrLowerTh;
-	/* RF RSSI High Power upper/lower Threshold. */
-	u8 RegRSSIHiPwrUpperTh;
-	u8 RegRSSIHiPwrLowerTh;
-	/* Current CCK RSSI value to determine CCK high power, asked by SD3 DZ,
-	 * by Bruce, 2007-04-12.
-	 */
-	u8 CurCCKRSSI;
-	bool bCurCCKPkt;
-	/* High Power Mechanism. Added by amy, 080312. */
-	bool bToUpdateTxPwr;
-	long UndecoratedSmoothedSS;
-	long UndecoratedSmoothedRxPower;
-	u8 RSSI;
-	char RxPower;
-	u8 InitialGain;
-	/* For adjust Dig Threshold during Legacy/Leisure Power Save Mode. */
-	u32 DozePeriodInPast2Sec;
-	/* Don't access BB/RF under disable PLL situation. */
-	u8 InitialGainBackUp;
-	u8 RegBModeGainStage;
-	/* by amy for rate adaptive */
-	struct timer_list rateadapter_timer;
-	u32 RateAdaptivePeriod;
-	bool bEnhanceTxPwr;
-	bool bUpdateARFR;
-	int ForcedDataRate; /* Force Data Rate. 0: Auto, 0x02: 1M ~ 0x6C: 54M.)
-			     */
-	u32 NumTxUnicast; /* YJ,add,080828,for keep alive. */
-	u8 keepAliveLevel; /*YJ,add,080828,for KeepAlive. */
-	unsigned long NumTxOkTotal;
-	u16 LastRetryCnt;
-	u16 LastRetryRate;
-	unsigned long LastTxokCnt;
-	unsigned long LastRxokCnt;
-	u16 CurrRetryCnt;
-	unsigned long LastTxOKBytes;
-	unsigned long NumTxOkBytesTotal;
-	u8 LastFailTxRate;
-	long LastFailTxRateSS;
-	u8 FailTxRateCount;
-	u32 LastTxThroughput;
-	/* for up rate. */
-	unsigned short bTryuping;
-	u8 CurrTxRate; /* the rate before up. */
-	u16 CurrRetryRate;
-	u16 TryupingCount;
-	u8 TryDownCountLowData;
-	u8 TryupingCountNoData;
-
-	u8 CurrentOperaRate;
-	struct work_struct reset_wq;
-	struct work_struct watch_dog_wq;
-	short ack_tx_to_ieee;
-
-	u8 dma_poll_stop_mask;
-
-	u16 ShortRetryLimit;
-	u16 LongRetryLimit;
-	u16 EarlyRxThreshold;
-	u32 TransmitConfig;
-	u32 ReceiveConfig;
-	u32 IntrMask;
-
-	struct chnl_access_setting ChannelAccessSetting;
-};
-
-#define MANAGE_PRIORITY 0
-#define BK_PRIORITY 1
-#define BE_PRIORITY 2
-#define VI_PRIORITY 3
-#define VO_PRIORITY 4
-#define HI_PRIORITY 5
-#define BEACON_PRIORITY 6
-
-#define LOW_PRIORITY VI_PRIORITY
-#define NORM_PRIORITY VO_PRIORITY
-/* AC2Queue mapping. */
-#define AC2Q(_ac) (((_ac) == WME_AC_VO) ? VO_PRIORITY : \
-		((_ac) == WME_AC_VI) ? VI_PRIORITY : \
-		((_ac) == WME_AC_BK) ? BK_PRIORITY : \
-		BE_PRIORITY)
-
-short rtl8180_tx(struct net_device *dev, u8 *skbuf, int len, int priority,
-		 bool morefrag, short fragdesc, int rate);
-
-u8 read_nic_byte(struct net_device *dev, int x);
-u32 read_nic_dword(struct net_device *dev, int x);
-u16 read_nic_word(struct net_device *dev, int x);
-void write_nic_byte(struct net_device *dev, int x, u8 y);
-void write_nic_word(struct net_device *dev, int x, u16 y);
-void write_nic_dword(struct net_device *dev, int x, u32 y);
-void force_pci_posting(struct net_device *dev);
-
-void rtl8180_rtx_disable(struct net_device *);
-void rtl8180_set_anaparam(struct net_device *dev, u32 a);
-void rtl8185_set_anaparam2(struct net_device *dev, u32 a);
-void rtl8180_set_hw_wep(struct net_device *dev);
-void rtl8180_no_hw_wep(struct net_device *dev);
-void rtl8180_update_msr(struct net_device *dev);
-void rtl8180_beacon_tx_disable(struct net_device *dev);
-void rtl8180_beacon_rx_disable(struct net_device *dev);
-int rtl8180_down(struct net_device *dev);
-int rtl8180_up(struct net_device *dev);
-void rtl8180_commit(struct net_device *dev);
-void rtl8180_set_chan(struct net_device *dev, short ch);
-void write_phy(struct net_device *dev, u8 adr, u8 data);
-void write_phy_cck(struct net_device *dev, u8 adr, u32 data);
-void write_phy_ofdm(struct net_device *dev, u8 adr, u32 data);
-void rtl8185_tx_antenna(struct net_device *dev, u8 ant);
-void rtl8185_rf_pins_enable(struct net_device *dev);
-void IPSEnter(struct net_device *dev);
-void IPSLeave(struct net_device *dev);
-int get_curr_tx_free_desc(struct net_device *dev, int priority);
-void UpdateInitialGain(struct net_device *dev);
-bool SetAntennaConfig87SE(struct net_device *dev, u8 DefaultAnt,
-			  bool bAntDiversity);
-
-void rtl8185b_adapter_start(struct net_device *dev);
-void rtl8185b_rx_enable(struct net_device *dev);
-void rtl8185b_tx_enable(struct net_device *dev);
-void rtl8180_reset(struct net_device *dev);
-void rtl8185b_irq_enable(struct net_device *dev);
-void fix_rx_fifo(struct net_device *dev);
-void fix_tx_fifo(struct net_device *dev);
-void rtl8225z2_SetTXPowerLevel(struct net_device *dev, short ch);
-void rtl8180_rate_adapter(struct work_struct *work);
-bool MgntActSet_RF_State(struct net_device *dev, enum rt_rf_power_state StateToSet,
-			 u32 ChangeSource);
-
-#endif
-
-/* fun with the built-in ieee80211 stack... */
-extern int ieee80211_crypto_init(void);
-extern void ieee80211_crypto_deinit(void);
-extern int ieee80211_crypto_tkip_init(void);
-extern void ieee80211_crypto_tkip_exit(void);
-extern int ieee80211_crypto_ccmp_init(void);
-extern void ieee80211_crypto_ccmp_exit(void);
-extern int ieee80211_crypto_wep_init(void);
-extern void ieee80211_crypto_wep_exit(void);
diff --git a/drivers/staging/rtl8187se/r8180_93cx6.h b/drivers/staging/rtl8187se/r8180_93cx6.h
deleted file mode 100644
index b52b5b0610ab..000000000000
--- a/drivers/staging/rtl8187se/r8180_93cx6.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
-	This is part of rtl8180 OpenSource driver
-	Copyright (C) Andrea Merello 2004-2005  <andrea.merello@gmail.com>
-	Released under the terms of GPL (General Public Licence)
-
-	Parts of this driver are based on the GPL part of the official realtek driver
-	Parts of this driver are based on the rtl8180 driver skeleton from Patric Schenke & Andres Salomon
-	Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver
-
-	We want to tanks the Authors of such projects and the Ndiswrapper project Authors.
-*/
-
-/*This files contains card eeprom (93c46 or 93c56) programming routines*/
-/*memory is addressed by WORDS*/
-
-#include "r8180.h"
-#include "r8180_hw.h"
-
-#define EPROM_DELAY 10
-
-#define EPROM_ANAPARAM_ADDRLWORD 0xd
-#define EPROM_ANAPARAM_ADDRHWORD 0xe
-
-#define RFCHIPID 0x6
-#define	RFCHIPID_INTERSIL 1
-#define	RFCHIPID_RFMD 2
-#define	RFCHIPID_PHILIPS 3
-#define	RFCHIPID_MAXIM 4
-#define	RFCHIPID_GCT 5
-#define RFCHIPID_RTL8225 9
-#define RF_ZEBRA2 11
-#define EPROM_TXPW_BASE 0x05
-#define RF_ZEBRA4 12
-#define RFCHIPID_RTL8255 0xa
-#define RF_PARAM 0x19
-#define RF_PARAM_DIGPHY_SHIFT 0
-#define RF_PARAM_ANTBDEFAULT_SHIFT 1
-#define RF_PARAM_CARRIERSENSE_SHIFT 2
-#define RF_PARAM_CARRIERSENSE_MASK (3<<2)
-#define ENERGY_TRESHOLD 0x17
-#define EPROM_VERSION 0x1E
-#define MAC_ADR 0x7
-
-#define CIS 0x18
-
-#define	EPROM_TXPW_OFDM_CH1_2 0x20
-
-#define	EPROM_TXPW_CH1_2 0x30
-
-#define RTL818X_EEPROM_CMD_READ		(1 << 0)
-#define RTL818X_EEPROM_CMD_WRITE	(1 << 1)
-#define RTL818X_EEPROM_CMD_CK		(1 << 2)
-#define RTL818X_EEPROM_CMD_CS		(1 << 3)
-
diff --git a/drivers/staging/rtl8187se/r8180_core.c b/drivers/staging/rtl8187se/r8180_core.c
deleted file mode 100644
index a6022d4e7573..000000000000
--- a/drivers/staging/rtl8187se/r8180_core.c
+++ /dev/null
@@ -1,3775 +0,0 @@
-/*
- * This is part of rtl818x pci OpenSource driver - v 0.1
- * Copyright (C) Andrea Merello 2004-2005  <andrea.merello@gmail.com>
- * Released under the terms of GPL (General Public License)
- *
- * Parts of this driver are based on the GPL part of the official
- * Realtek driver.
- *
- * Parts of this driver are based on the rtl8180 driver skeleton
- * from Patric Schenke & Andres Salomon.
- *
- * Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver.
- *
- * Parts of BB/RF code are derived from David Young rtl8180 netbsd driver.
- *
- * RSSI calc function from 'The Deuce'
- *
- * Some ideas borrowed from the 8139too.c driver included in linux kernel.
- *
- * We (I?) want to thanks the Authors of those projecs and also the
- * Ndiswrapper's project Authors.
- *
- * A big big thanks goes also to Realtek corp. for their help in my attempt to
- * add RTL8185 and RTL8225 support, and to David Young also.
- *
- * Power management interface routines.
- * Written by Mariusz Matuszek.
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#undef RX_DONT_PASS_UL
-#undef DUMMY_RX
-
-#include <linux/slab.h>
-#include <linux/syscalls.h>
-#include <linux/eeprom_93cx6.h>
-#include <linux/interrupt.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-
-#include "r8180_hw.h"
-#include "r8180.h"
-#include "r8180_rtl8225.h" /* RTL8225 Radio frontend */
-#include "r8180_93cx6.h"   /* Card EEPROM */
-#include "r8180_wx.h"
-#include "r8180_dm.h"
-
-#include "ieee80211/dot11d.h"
-
-static struct pci_device_id rtl8180_pci_id_tbl[] = {
-	{
-		.vendor = PCI_VENDOR_ID_REALTEK,
-		.device = 0x8199,
-		.subvendor = PCI_ANY_ID,
-		.subdevice = PCI_ANY_ID,
-		.driver_data = 0,
-	},
-	{
-		.vendor = 0,
-		.device = 0,
-		.subvendor = 0,
-		.subdevice = 0,
-		.driver_data = 0,
-	}
-};
-
-static char ifname[IFNAMSIZ] = "wlan%d";
-static int hwwep;
-
-MODULE_LICENSE("GPL");
-MODULE_DEVICE_TABLE(pci, rtl8180_pci_id_tbl);
-MODULE_AUTHOR("Andrea Merello <andrea.merello@gmail.com>");
-MODULE_DESCRIPTION("Linux driver for Realtek RTL8187SE WiFi cards");
-
-module_param_string(ifname, ifname, sizeof(ifname), S_IRUGO|S_IWUSR);
-module_param(hwwep, int, S_IRUGO|S_IWUSR);
-
-MODULE_PARM_DESC(hwwep, " Try to use hardware WEP support. Still broken and not available on all cards");
-
-static int rtl8180_pci_probe(struct pci_dev *pdev,
-			     const struct pci_device_id *id);
-
-static void rtl8180_pci_remove(struct pci_dev *pdev);
-
-static void rtl8180_shutdown(struct pci_dev *pdev)
-{
-	struct net_device *dev = pci_get_drvdata(pdev);
-	if (dev->netdev_ops->ndo_stop)
-		dev->netdev_ops->ndo_stop(dev);
-	pci_disable_device(pdev);
-}
-
-static int rtl8180_suspend(struct pci_dev *pdev, pm_message_t state)
-{
-	struct net_device *dev = pci_get_drvdata(pdev);
-
-	if (!netif_running(dev))
-		goto out_pci_suspend;
-
-	if (dev->netdev_ops->ndo_stop)
-		dev->netdev_ops->ndo_stop(dev);
-
-	netif_device_detach(dev);
-
-out_pci_suspend:
-	pci_save_state(pdev);
-	pci_disable_device(pdev);
-	pci_set_power_state(pdev, pci_choose_state(pdev, state));
-	return 0;
-}
-
-static int rtl8180_resume(struct pci_dev *pdev)
-{
-	struct net_device *dev = pci_get_drvdata(pdev);
-	int err;
-	u32 val;
-
-	pci_set_power_state(pdev, PCI_D0);
-
-	err = pci_enable_device(pdev);
-	if (err) {
-		dev_err(&pdev->dev, "pci_enable_device failed on resume\n");
-
-		return err;
-	}
-
-	pci_restore_state(pdev);
-
-	/*
-	 * Suspend/Resume resets the PCI configuration space, so we have to
-	 * re-disable the RETRY_TIMEOUT register (0x41) to keep PCI Tx retries
-	 * from interfering with C3 CPU state. pci_restore_state won't help
-	 * here since it only restores the first 64 bytes pci config header.
-	 */
-	pci_read_config_dword(pdev, 0x40, &val);
-	if ((val & 0x0000ff00) != 0)
-		pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
-
-	if (!netif_running(dev))
-		goto out;
-
-	if (dev->netdev_ops->ndo_open)
-		dev->netdev_ops->ndo_open(dev);
-
-	netif_device_attach(dev);
-out:
-	return 0;
-}
-
-static struct pci_driver rtl8180_pci_driver = {
-	.name		= RTL8180_MODULE_NAME,
-	.id_table	= rtl8180_pci_id_tbl,
-	.probe		= rtl8180_pci_probe,
-	.remove		= rtl8180_pci_remove,
-	.suspend	= rtl8180_suspend,
-	.resume		= rtl8180_resume,
-	.shutdown	= rtl8180_shutdown,
-};
-
-u8 read_nic_byte(struct net_device *dev, int x)
-{
-	return 0xff&readb((u8 __iomem *)dev->mem_start + x);
-}
-
-u32 read_nic_dword(struct net_device *dev, int x)
-{
-	return readl((u8 __iomem *)dev->mem_start + x);
-}
-
-u16 read_nic_word(struct net_device *dev, int x)
-{
-	return readw((u8 __iomem *)dev->mem_start + x);
-}
-
-void write_nic_byte(struct net_device *dev, int x, u8 y)
-{
-	writeb(y, (u8 __iomem *)dev->mem_start + x);
-	udelay(20);
-}
-
-void write_nic_dword(struct net_device *dev, int x, u32 y)
-{
-	writel(y, (u8 __iomem *)dev->mem_start + x);
-	udelay(20);
-}
-
-void write_nic_word(struct net_device *dev, int x, u16 y)
-{
-	writew(y, (u8 __iomem *)dev->mem_start + x);
-	udelay(20);
-}
-
-inline void force_pci_posting(struct net_device *dev)
-{
-	read_nic_byte(dev, EPROM_CMD);
-	mb();
-}
-
-static irqreturn_t rtl8180_interrupt(int irq, void *netdev);
-void set_nic_rxring(struct net_device *dev);
-void set_nic_txring(struct net_device *dev);
-static struct net_device_stats *rtl8180_stats(struct net_device *dev);
-void rtl8180_commit(struct net_device *dev);
-void rtl8180_start_tx_beacon(struct net_device *dev);
-
-static struct proc_dir_entry *rtl8180_proc;
-
-static int proc_get_registers(struct seq_file *m, void *v)
-{
-	struct net_device *dev = m->private;
-	int i, n, max = 0xff;
-
-	/* This dump the current register page */
-	for (n = 0; n <= max;) {
-		seq_printf(m, "\nD:  %2x > ", n);
-
-		for (i = 0; i < 16 && n <= max; i++, n++)
-			seq_printf(m, "%2x ", read_nic_byte(dev, n));
-	}
-	seq_putc(m, '\n');
-	return 0;
-}
-
-int get_curr_tx_free_desc(struct net_device *dev, int priority);
-
-static int proc_get_stats_hw(struct seq_file *m, void *v)
-{
-	return 0;
-}
-
-static int proc_get_stats_rx(struct seq_file *m, void *v)
-{
-	struct net_device *dev = m->private;
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
-	seq_printf(m,
-		"RX OK: %lu\n"
-		"RX Retry: %lu\n"
-		"RX CRC Error(0-500): %lu\n"
-		"RX CRC Error(500-1000): %lu\n"
-		"RX CRC Error(>1000): %lu\n"
-		"RX ICV Error: %lu\n",
-		priv->stats.rxint,
-		priv->stats.rxerr,
-		priv->stats.rxcrcerrmin,
-		priv->stats.rxcrcerrmid,
-		priv->stats.rxcrcerrmax,
-		priv->stats.rxicverr
-		);
-
-	return 0;
-}
-
-static int proc_get_stats_tx(struct seq_file *m, void *v)
-{
-	struct net_device *dev = m->private;
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	unsigned long totalOK;
-
-	totalOK = priv->stats.txnpokint + priv->stats.txhpokint +
-		priv->stats.txlpokint;
-
-	seq_printf(m,
-		"TX OK: %lu\n"
-		"TX Error: %lu\n"
-		"TX Retry: %lu\n"
-		"TX beacon OK: %lu\n"
-		"TX beacon error: %lu\n",
-		totalOK,
-		priv->stats.txnperr+priv->stats.txhperr+priv->stats.txlperr,
-		priv->stats.txretry,
-		priv->stats.txbeacon,
-		priv->stats.txbeaconerr
-	);
-
-	return 0;
-}
-
-static void rtl8180_proc_module_init(void)
-{
-	DMESG("Initializing proc filesystem");
-	rtl8180_proc = proc_mkdir(RTL8180_MODULE_NAME, init_net.proc_net);
-}
-
-static void rtl8180_proc_module_remove(void)
-{
-	remove_proc_entry(RTL8180_MODULE_NAME, init_net.proc_net);
-}
-
-static void rtl8180_proc_remove_one(struct net_device *dev)
-{
-	remove_proc_subtree(dev->name, rtl8180_proc);
-}
-
-/*
- * seq_file wrappers for procfile show routines.
- */
-static int rtl8180_proc_open(struct inode *inode, struct file *file)
-{
-	struct net_device *dev = proc_get_parent_data(inode);
-	int (*show)(struct seq_file *, void *) = PDE_DATA(inode);
-
-	return single_open(file, show, dev);
-}
-
-static const struct file_operations rtl8180_proc_fops = {
-	.open		= rtl8180_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-/*
- * Table of proc files we need to create.
- */
-struct rtl8180_proc_file {
-	char name[12];
-	int (*show)(struct seq_file *, void *);
-};
-
-static const struct rtl8180_proc_file rtl8180_proc_files[] = {
-	{ "stats-hw",	&proc_get_stats_hw },
-	{ "stats-rx",	&proc_get_stats_rx },
-	{ "stats-tx",	&proc_get_stats_tx },
-	{ "registers",	&proc_get_registers },
-	{ "" }
-};
-
-static void rtl8180_proc_init_one(struct net_device *dev)
-{
-	const struct rtl8180_proc_file *f;
-	struct proc_dir_entry *dir;
-
-	dir = proc_mkdir_data(dev->name, 0, rtl8180_proc, dev);
-	if (!dir) {
-		DMESGE("Unable to initialize /proc/net/r8180/%s\n", dev->name);
-		return;
-	}
-
-	for (f = rtl8180_proc_files; f->name[0]; f++) {
-		if (!proc_create_data(f->name, S_IFREG | S_IRUGO, dir,
-				      &rtl8180_proc_fops, f->show)) {
-			DMESGE("Unable to initialize /proc/net/r8180/%s/%s\n",
-			       dev->name, f->name);
-			return;
-		}
-	}
-}
-
-/*
- * FIXME: check if we can use some standard already-existent
- * data type+functions in kernel.
- */
-
-static short buffer_add(struct buffer **buffer, u32 *buf, dma_addr_t dma,
-			struct buffer **bufferhead)
-{
-	struct buffer *tmp;
-
-	if (!*buffer) {
-
-		*buffer = kmalloc(sizeof(struct buffer), GFP_KERNEL);
-
-		if (*buffer == NULL) {
-			DMESGE("Failed to kmalloc head of TX/RX struct");
-			return -1;
-		}
-		(*buffer)->next = *buffer;
-		(*buffer)->buf = buf;
-		(*buffer)->dma = dma;
-		if (bufferhead != NULL)
-			(*bufferhead) = (*buffer);
-		return 0;
-	}
-	tmp = *buffer;
-
-	while (tmp->next != (*buffer))
-		tmp = tmp->next;
-	tmp->next = kmalloc(sizeof(struct buffer), GFP_KERNEL);
-	if (tmp->next == NULL) {
-		DMESGE("Failed to kmalloc TX/RX struct");
-		return -1;
-	}
-	tmp->next->buf = buf;
-	tmp->next->dma = dma;
-	tmp->next->next = *buffer;
-
-	return 0;
-}
-
-static void buffer_free(struct net_device *dev, struct buffer **buffer, int len,
-		 short consistent)
-{
-
-	struct buffer *tmp, *next;
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	struct pci_dev *pdev = priv->pdev;
-
-	if (!*buffer)
-		return;
-
-	tmp = *buffer;
-
-	do {
-		next = tmp->next;
-		if (consistent) {
-			pci_free_consistent(pdev, len,
-				    tmp->buf, tmp->dma);
-		} else {
-			pci_unmap_single(pdev, tmp->dma,
-			len, PCI_DMA_FROMDEVICE);
-			kfree(tmp->buf);
-		}
-		kfree(tmp);
-		tmp = next;
-	} while (next != *buffer);
-
-	*buffer = NULL;
-}
-
-int get_curr_tx_free_desc(struct net_device *dev, int priority)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	u32 *tail;
-	u32 *head;
-	int ret;
-
-	switch (priority) {
-	case MANAGE_PRIORITY:
-		head = priv->txmapringhead;
-		tail = priv->txmapringtail;
-		break;
-	case BK_PRIORITY:
-		head = priv->txbkpringhead;
-		tail = priv->txbkpringtail;
-		break;
-	case BE_PRIORITY:
-		head = priv->txbepringhead;
-		tail = priv->txbepringtail;
-		break;
-	case VI_PRIORITY:
-		head = priv->txvipringhead;
-		tail = priv->txvipringtail;
-		break;
-	case VO_PRIORITY:
-		head = priv->txvopringhead;
-		tail = priv->txvopringtail;
-		break;
-	case HI_PRIORITY:
-		head = priv->txhpringhead;
-		tail = priv->txhpringtail;
-		break;
-	default:
-		return -1;
-	}
-
-	if (head <= tail)
-		ret = priv->txringcount - (tail - head)/8;
-	else
-		ret = (head - tail)/8;
-
-	if (ret > priv->txringcount)
-		DMESG("BUG");
-
-	return ret;
-}
-
-static short check_nic_enought_desc(struct net_device *dev, int priority)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	struct ieee80211_device *ieee = netdev_priv(dev);
-	int requiredbyte;
-	int required;
-
-	requiredbyte = priv->ieee80211->fts +
-		sizeof(struct ieee80211_header_data);
-
-	if (ieee->current_network.QoS_Enable)
-		requiredbyte += 2;
-
-	required = requiredbyte / (priv->txbuffsize-4);
-
-	if (requiredbyte % priv->txbuffsize)
-		required++;
-
-	/* for now we keep two free descriptor as a safety boundary
-	 * between the tail and the head
-	 */
-
-	return required + 2 < get_curr_tx_free_desc(dev, priority);
-}
-
-void fix_tx_fifo(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	u32 *tmp;
-	int i;
-
-	for (tmp = priv->txmapring, i = 0;
-	     i < priv->txringcount;
-	     tmp += 8, i++) {
-		*tmp = *tmp & ~(1<<31);
-	}
-
-	for (tmp = priv->txbkpring, i = 0;
-	     i < priv->txringcount;
-	     tmp += 8, i++) {
-		*tmp = *tmp & ~(1<<31);
-	}
-
-	for (tmp = priv->txbepring, i = 0;
-	     i < priv->txringcount;
-	     tmp += 8, i++) {
-		*tmp = *tmp & ~(1<<31);
-	}
-	for (tmp = priv->txvipring, i = 0;
-	     i < priv->txringcount;
-	     tmp += 8, i++) {
-		*tmp = *tmp & ~(1<<31);
-	}
-
-	for (tmp = priv->txvopring, i = 0;
-	     i < priv->txringcount;
-	     tmp += 8, i++) {
-		*tmp = *tmp & ~(1<<31);
-	}
-
-	for (tmp = priv->txhpring, i = 0;
-	     i < priv->txringcount;
-	     tmp += 8, i++) {
-		*tmp = *tmp & ~(1<<31);
-	}
-
-	for (tmp = priv->txbeaconring, i = 0;
-	     i < priv->txbeaconcount;
-	     tmp += 8, i++) {
-		*tmp = *tmp & ~(1<<31);
-	}
-
-	priv->txmapringtail = priv->txmapring;
-	priv->txmapringhead = priv->txmapring;
-	priv->txmapbufstail = priv->txmapbufs;
-
-	priv->txbkpringtail = priv->txbkpring;
-	priv->txbkpringhead = priv->txbkpring;
-	priv->txbkpbufstail = priv->txbkpbufs;
-
-	priv->txbepringtail = priv->txbepring;
-	priv->txbepringhead = priv->txbepring;
-	priv->txbepbufstail = priv->txbepbufs;
-
-	priv->txvipringtail = priv->txvipring;
-	priv->txvipringhead = priv->txvipring;
-	priv->txvipbufstail = priv->txvipbufs;
-
-	priv->txvopringtail = priv->txvopring;
-	priv->txvopringhead = priv->txvopring;
-	priv->txvopbufstail = priv->txvopbufs;
-
-	priv->txhpringtail = priv->txhpring;
-	priv->txhpringhead = priv->txhpring;
-	priv->txhpbufstail = priv->txhpbufs;
-
-	priv->txbeaconringtail = priv->txbeaconring;
-	priv->txbeaconbufstail = priv->txbeaconbufs;
-	set_nic_txring(dev);
-
-	ieee80211_reset_queue(priv->ieee80211);
-	priv->ack_tx_to_ieee = 0;
-}
-
-void fix_rx_fifo(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	u32 *tmp;
-	struct buffer *rxbuf;
-	u8 rx_desc_size;
-
-	rx_desc_size = 8; /* 4*8 = 32 bytes */
-
-	for (tmp = priv->rxring, rxbuf = priv->rxbufferhead;
-	     (tmp < (priv->rxring)+(priv->rxringcount)*rx_desc_size);
-	     tmp += rx_desc_size, rxbuf = rxbuf->next) {
-		*(tmp+2) = rxbuf->dma;
-		*tmp = *tmp & ~0xfff;
-		*tmp = *tmp | priv->rxbuffersize;
-		*tmp |= (1<<31);
-	}
-
-	priv->rxringtail = priv->rxring;
-	priv->rxbuffer = priv->rxbufferhead;
-	priv->rx_skb_complete = 1;
-	set_nic_rxring(dev);
-}
-
-static void rtl8180_irq_disable(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
-	write_nic_dword(dev, IMR, 0);
-	force_pci_posting(dev);
-	priv->irq_enabled = 0;
-}
-
-void rtl8180_set_mode(struct net_device *dev, int mode)
-{
-	u8 ecmd;
-
-	ecmd = read_nic_byte(dev, EPROM_CMD);
-	ecmd = ecmd & ~EPROM_CMD_OPERATING_MODE_MASK;
-	ecmd = ecmd | (mode<<EPROM_CMD_OPERATING_MODE_SHIFT);
-	ecmd = ecmd & ~(1<<EPROM_CS_SHIFT);
-	ecmd = ecmd & ~(1<<EPROM_CK_SHIFT);
-	write_nic_byte(dev, EPROM_CMD, ecmd);
-}
-
-void rtl8180_beacon_tx_enable(struct net_device *dev);
-
-void rtl8180_update_msr(struct net_device *dev)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	u8 msr;
-	u32 rxconf;
-
-	msr  = read_nic_byte(dev, MSR);
-	msr &= ~MSR_LINK_MASK;
-
-	rxconf = read_nic_dword(dev, RX_CONF);
-
-	if (priv->ieee80211->state == IEEE80211_LINKED)	{
-		if (priv->ieee80211->iw_mode == IW_MODE_ADHOC)
-			msr |= (MSR_LINK_ADHOC<<MSR_LINK_SHIFT);
-		else if (priv->ieee80211->iw_mode == IW_MODE_MASTER)
-			msr |= (MSR_LINK_MASTER<<MSR_LINK_SHIFT);
-		else if (priv->ieee80211->iw_mode == IW_MODE_INFRA)
-			msr |= (MSR_LINK_MANAGED<<MSR_LINK_SHIFT);
-		else
-			msr |= (MSR_LINK_NONE<<MSR_LINK_SHIFT);
-		rxconf |= (1<<RX_CHECK_BSSID_SHIFT);
-
-	} else {
-		msr |= (MSR_LINK_NONE<<MSR_LINK_SHIFT);
-		rxconf &= ~(1<<RX_CHECK_BSSID_SHIFT);
-	}
-
-	write_nic_byte(dev, MSR, msr);
-	write_nic_dword(dev, RX_CONF, rxconf);
-}
-
-void rtl8180_set_chan(struct net_device *dev, short ch)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
-	if ((ch > 14) || (ch < 1)) {
-		netdev_err(dev, "In %s: Invalid channel %d\n", __func__, ch);
-		return;
-	}
-
-	priv->chan = ch;
-	priv->rf_set_chan(dev, priv->chan);
-}
-
-void set_nic_txring(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
-	write_nic_dword(dev, TX_MANAGEPRIORITY_RING_ADDR, priv->txmapringdma);
-	write_nic_dword(dev, TX_BKPRIORITY_RING_ADDR, priv->txbkpringdma);
-	write_nic_dword(dev, TX_BEPRIORITY_RING_ADDR, priv->txbepringdma);
-	write_nic_dword(dev, TX_VIPRIORITY_RING_ADDR, priv->txvipringdma);
-	write_nic_dword(dev, TX_VOPRIORITY_RING_ADDR, priv->txvopringdma);
-	write_nic_dword(dev, TX_HIGHPRIORITY_RING_ADDR, priv->txhpringdma);
-	write_nic_dword(dev, TX_BEACON_RING_ADDR, priv->txbeaconringdma);
-}
-
-void rtl8180_beacon_tx_enable(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
-	rtl8180_set_mode(dev, EPROM_CMD_CONFIG);
-	priv->dma_poll_stop_mask &= ~(TPPOLLSTOP_BQ);
-	write_nic_byte(dev, TPPollStop, priv->dma_poll_mask);
-	rtl8180_set_mode(dev, EPROM_CMD_NORMAL);
-}
-
-void rtl8180_beacon_tx_disable(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
-	rtl8180_set_mode(dev, EPROM_CMD_CONFIG);
-	priv->dma_poll_stop_mask |= TPPOLLSTOP_BQ;
-	write_nic_byte(dev, TPPollStop, priv->dma_poll_stop_mask);
-	rtl8180_set_mode(dev, EPROM_CMD_NORMAL);
-
-}
-
-void rtl8180_rtx_disable(struct net_device *dev)
-{
-	u8 cmd;
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	cmd = read_nic_byte(dev, CMD);
-	write_nic_byte(dev, CMD, cmd &
-		       ~((1<<CMD_RX_ENABLE_SHIFT)|(1<<CMD_TX_ENABLE_SHIFT)));
-	force_pci_posting(dev);
-	mdelay(10);
-
-	if (!priv->rx_skb_complete)
-		dev_kfree_skb_any(priv->rx_skb);
-}
-
-static short alloc_tx_desc_ring(struct net_device *dev, int bufsize, int count,
-				int addr)
-{
-	int i;
-	u32 *desc;
-	u32 *tmp;
-	dma_addr_t dma_desc, dma_tmp;
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	struct pci_dev *pdev = priv->pdev;
-	void *buf;
-
-	if ((bufsize & 0xfff) != bufsize) {
-		DMESGE("TX buffer allocation too large");
-		return 0;
-	}
-	desc = (u32 *)pci_alloc_consistent(pdev,
-					  sizeof(u32)*8*count+256, &dma_desc);
-	if (desc == NULL)
-		return -1;
-
-	if (dma_desc & 0xff)
-		/*
-		 * descriptor's buffer must be 256 byte aligned
-		 * we shouldn't be here, since we set DMA mask !
-		 */
-		WARN(1, "DMA buffer is not aligned\n");
-
-	tmp = desc;
-
-	for (i = 0; i < count; i++) {
-		buf = (void *)pci_alloc_consistent(pdev, bufsize, &dma_tmp);
-		if (buf == NULL)
-			return -ENOMEM;
-
-		switch (addr) {
-		case TX_MANAGEPRIORITY_RING_ADDR:
-			if (-1 == buffer_add(&priv->txmapbufs,
-				buf, dma_tmp, NULL)) {
-				DMESGE("Unable to allocate mem for buffer NP");
-				return -ENOMEM;
-			}
-			break;
-		case TX_BKPRIORITY_RING_ADDR:
-			if (-1 == buffer_add(&priv->txbkpbufs,
-				buf, dma_tmp, NULL)) {
-				DMESGE("Unable to allocate mem for buffer LP");
-				return -ENOMEM;
-			}
-			break;
-		case TX_BEPRIORITY_RING_ADDR:
-			if (-1 == buffer_add(&priv->txbepbufs,
-				buf, dma_tmp, NULL)) {
-				DMESGE("Unable to allocate mem for buffer NP");
-				return -ENOMEM;
-			}
-			break;
-		case TX_VIPRIORITY_RING_ADDR:
-			if (-1 == buffer_add(&priv->txvipbufs,
-				buf, dma_tmp, NULL)) {
-				DMESGE("Unable to allocate mem for buffer LP");
-				return -ENOMEM;
-			}
-			break;
-		case TX_VOPRIORITY_RING_ADDR:
-			if (-1 == buffer_add(&priv->txvopbufs,
-				buf, dma_tmp, NULL)) {
-				DMESGE("Unable to allocate mem for buffer NP");
-				return -ENOMEM;
-			}
-			break;
-		case TX_HIGHPRIORITY_RING_ADDR:
-			if (-1 == buffer_add(&priv->txhpbufs,
-				buf, dma_tmp, NULL)) {
-				DMESGE("Unable to allocate mem for buffer HP");
-				return -ENOMEM;
-			}
-			break;
-		case TX_BEACON_RING_ADDR:
-			if (-1 == buffer_add(&priv->txbeaconbufs,
-				buf, dma_tmp, NULL)) {
-				DMESGE("Unable to allocate mem for buffer BP");
-				return -ENOMEM;
-			}
-			break;
-		}
-		*tmp = *tmp & ~(1<<31); /* descriptor empty, owned by the drv */
-		*(tmp+2) = (u32)dma_tmp;
-		*(tmp+3) = bufsize;
-
-		if (i+1 < count)
-			*(tmp+4) = (u32)dma_desc+((i+1)*8*4);
-		else
-			*(tmp+4) = (u32)dma_desc;
-
-		tmp = tmp+8;
-	}
-
-	switch (addr) {
-	case TX_MANAGEPRIORITY_RING_ADDR:
-		priv->txmapringdma = dma_desc;
-		priv->txmapring = desc;
-		break;
-	case TX_BKPRIORITY_RING_ADDR:
-		priv->txbkpringdma = dma_desc;
-		priv->txbkpring = desc;
-		break;
-	case TX_BEPRIORITY_RING_ADDR:
-		priv->txbepringdma = dma_desc;
-		priv->txbepring = desc;
-		break;
-	case TX_VIPRIORITY_RING_ADDR:
-		priv->txvipringdma = dma_desc;
-		priv->txvipring = desc;
-		break;
-	case TX_VOPRIORITY_RING_ADDR:
-		priv->txvopringdma = dma_desc;
-		priv->txvopring = desc;
-		break;
-	case TX_HIGHPRIORITY_RING_ADDR:
-		priv->txhpringdma = dma_desc;
-		priv->txhpring = desc;
-		break;
-	case TX_BEACON_RING_ADDR:
-		priv->txbeaconringdma = dma_desc;
-		priv->txbeaconring = desc;
-		break;
-
-	}
-
-	return 0;
-}
-
-static void free_tx_desc_rings(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	struct pci_dev *pdev = priv->pdev;
-	int count = priv->txringcount;
-
-	pci_free_consistent(pdev, sizeof(u32)*8*count+256,
-			    priv->txmapring, priv->txmapringdma);
-	buffer_free(dev, &(priv->txmapbufs), priv->txbuffsize, 1);
-
-	pci_free_consistent(pdev, sizeof(u32)*8*count+256,
-			    priv->txbkpring, priv->txbkpringdma);
-	buffer_free(dev, &(priv->txbkpbufs), priv->txbuffsize, 1);
-
-	pci_free_consistent(pdev, sizeof(u32)*8*count+256,
-			    priv->txbepring, priv->txbepringdma);
-	buffer_free(dev, &(priv->txbepbufs), priv->txbuffsize, 1);
-
-	pci_free_consistent(pdev, sizeof(u32)*8*count+256,
-			    priv->txvipring, priv->txvipringdma);
-	buffer_free(dev, &(priv->txvipbufs), priv->txbuffsize, 1);
-
-	pci_free_consistent(pdev, sizeof(u32)*8*count+256,
-			    priv->txvopring, priv->txvopringdma);
-	buffer_free(dev, &(priv->txvopbufs), priv->txbuffsize, 1);
-
-	pci_free_consistent(pdev, sizeof(u32)*8*count+256,
-			    priv->txhpring, priv->txhpringdma);
-	buffer_free(dev, &(priv->txhpbufs), priv->txbuffsize, 1);
-
-	count = priv->txbeaconcount;
-	pci_free_consistent(pdev, sizeof(u32)*8*count+256,
-			    priv->txbeaconring, priv->txbeaconringdma);
-	buffer_free(dev, &(priv->txbeaconbufs), priv->txbuffsize, 1);
-}
-
-static void free_rx_desc_ring(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	struct pci_dev *pdev = priv->pdev;
-	int count = priv->rxringcount;
-
-	pci_free_consistent(pdev, sizeof(u32)*8*count+256,
-			    priv->rxring, priv->rxringdma);
-
-	buffer_free(dev, &(priv->rxbuffer), priv->rxbuffersize, 0);
-}
-
-static short alloc_rx_desc_ring(struct net_device *dev, u16 bufsize, int count)
-{
-	int i;
-	u32 *desc;
-	u32 *tmp;
-	dma_addr_t dma_desc, dma_tmp;
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	struct pci_dev *pdev = priv->pdev;
-	void *buf;
-	u8 rx_desc_size;
-
-	rx_desc_size = 8; /* 4*8 = 32 bytes */
-
-	if ((bufsize & 0xfff) != bufsize) {
-		DMESGE("RX buffer allocation too large");
-		return -1;
-	}
-
-	desc = (u32 *)pci_alloc_consistent(pdev,
-		sizeof(u32) * rx_desc_size * count + 256, &dma_desc);
-
-	if (dma_desc & 0xff)
-		/*
-		 * descriptor's buffer must be 256 byte aligned
-		 * should never happen since we specify the DMA mask
-		 */
-		WARN(1, "DMA buffer is not aligned\n");
-
-	priv->rxring = desc;
-	priv->rxringdma = dma_desc;
-	tmp = desc;
-
-	for (i = 0; i < count; i++) {
-		buf = kmalloc(bufsize * sizeof(u8), GFP_ATOMIC);
-		if (buf == NULL) {
-			DMESGE("Failed to kmalloc RX buffer");
-			return -1;
-		}
-
-		dma_tmp = pci_map_single(pdev, buf, bufsize * sizeof(u8),
-					 PCI_DMA_FROMDEVICE);
-		if (pci_dma_mapping_error(pdev, dma_tmp))
-			return -1;
-		if (-1 == buffer_add(&(priv->rxbuffer), buf, dma_tmp,
-			   &(priv->rxbufferhead))) {
-			DMESGE("Unable to allocate mem RX buf");
-			return -1;
-		}
-		*tmp = 0; /* zero pads the header of the descriptor */
-		*tmp = *tmp | (bufsize&0xfff);
-		*(tmp+2) = (u32)dma_tmp;
-		*tmp = *tmp | (1<<31); /* descriptor void, owned by the NIC */
-
-		tmp = tmp+rx_desc_size;
-	}
-
-	/* this is the last descriptor */
-	*(tmp - rx_desc_size) = *(tmp - rx_desc_size) | (1 << 30);
-
-	return 0;
-}
-
-
-void set_nic_rxring(struct net_device *dev)
-{
-	u8 pgreg;
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
-	pgreg = read_nic_byte(dev, PGSELECT);
-	write_nic_byte(dev, PGSELECT, pgreg & ~(1<<PGSELECT_PG_SHIFT));
-
-	write_nic_dword(dev, RXRING_ADDR, priv->rxringdma);
-}
-
-void rtl8180_reset(struct net_device *dev)
-{
-	u8 cr;
-
-	rtl8180_irq_disable(dev);
-
-	cr = read_nic_byte(dev, CMD);
-	cr = cr & 2;
-	cr = cr | (1<<CMD_RST_SHIFT);
-	write_nic_byte(dev, CMD, cr);
-
-	force_pci_posting(dev);
-
-	mdelay(200);
-
-	if (read_nic_byte(dev, CMD) & (1<<CMD_RST_SHIFT))
-		DMESGW("Card reset timeout!");
-	else
-		DMESG("Card successfully reset");
-
-	rtl8180_set_mode(dev, EPROM_CMD_LOAD);
-	force_pci_posting(dev);
-	mdelay(200);
-}
-
-inline u16 ieeerate2rtlrate(int rate)
-{
-	switch (rate) {
-	case 10:
-		return 0;
-	case 20:
-		return 1;
-	case 55:
-		return 2;
-	case 110:
-		return 3;
-	case 60:
-		return 4;
-	case 90:
-		return 5;
-	case 120:
-		return 6;
-	case 180:
-		return 7;
-	case 240:
-		return 8;
-	case 360:
-		return 9;
-	case 480:
-		return 10;
-	case 540:
-		return 11;
-	default:
-		return 3;
-	}
-}
-
-static u16 rtl_rate[] = {10, 20, 55, 110, 60,
-	90, 120, 180, 240, 360, 480, 540, 720};
-
-inline u16 rtl8180_rate2rate(short rate)
-{
-	if (rate > 12)
-		return 10;
-	return rtl_rate[rate];
-}
-
-inline u8 rtl8180_IsWirelessBMode(u16 rate)
-{
-	if (((rate <= 110) && (rate != 60) && (rate != 90)) || (rate == 220))
-		return 1;
-	else
-		return 0;
-}
-
-u16 N_DBPSOfRate(u16 DataRate);
-
-static u16 ComputeTxTime(u16 FrameLength, u16 DataRate, u8 bManagementFrame,
-		  u8 bShortPreamble)
-{
-	u16	FrameTime;
-	u16	N_DBPS;
-	u16	Ceiling;
-
-	if (rtl8180_IsWirelessBMode(DataRate)) {
-		if (bManagementFrame || !bShortPreamble || DataRate == 10)
-			/* long preamble */
-			FrameTime = (u16)(144+48+(FrameLength*8/(DataRate/10)));
-		else
-			/* short preamble */
-			FrameTime = (u16)(72+24+(FrameLength*8/(DataRate/10)));
-
-		if ((FrameLength*8 % (DataRate/10)) != 0) /* get the ceilling */
-			FrameTime++;
-	} else {	/* 802.11g DSSS-OFDM PLCP length field calculation. */
-		N_DBPS = N_DBPSOfRate(DataRate);
-		Ceiling = (16 + 8*FrameLength + 6) / N_DBPS
-				+ (((16 + 8*FrameLength + 6) % N_DBPS) ? 1 : 0);
-		FrameTime = (u16)(16 + 4 + 4*Ceiling + 6);
-	}
-	return FrameTime;
-}
-
-u16 N_DBPSOfRate(u16 DataRate)
-{
-	 u16 N_DBPS = 24;
-
-	switch (DataRate) {
-	case 60:
-		N_DBPS = 24;
-		break;
-	case 90:
-		N_DBPS = 36;
-		break;
-	case 120:
-		N_DBPS = 48;
-		break;
-	case 180:
-		N_DBPS = 72;
-		break;
-	case 240:
-		N_DBPS = 96;
-		break;
-	case 360:
-		N_DBPS = 144;
-		break;
-	case 480:
-		N_DBPS = 192;
-		break;
-	case 540:
-		N_DBPS = 216;
-		break;
-	default:
-		break;
-	}
-
-	return N_DBPS;
-}
-
-/*
- * For Netgear case, they want good-looking signal strength.
- */
-static long NetgearSignalStrengthTranslate(long LastSS, long CurrSS)
-{
-	long RetSS;
-
-	/* Step 1. Scale mapping. */
-	if (CurrSS >= 71 && CurrSS <= 100)
-		RetSS = 90 + ((CurrSS - 70) / 3);
-	else if (CurrSS >= 41 && CurrSS <= 70)
-		RetSS = 78 + ((CurrSS - 40) / 3);
-	else if (CurrSS >= 31 && CurrSS <= 40)
-		RetSS = 66 + (CurrSS - 30);
-	else if (CurrSS >= 21 && CurrSS <= 30)
-		RetSS = 54 + (CurrSS - 20);
-	else if (CurrSS >= 5 && CurrSS <= 20)
-		RetSS = 42 + (((CurrSS - 5) * 2) / 3);
-	else if (CurrSS == 4)
-		RetSS = 36;
-	else if (CurrSS == 3)
-		RetSS = 27;
-	else if (CurrSS == 2)
-		RetSS = 18;
-	else if (CurrSS == 1)
-		RetSS = 9;
-	else
-		RetSS = CurrSS;
-
-	/* Step 2. Smoothing. */
-	if (LastSS > 0)
-		RetSS = ((LastSS * 5) + (RetSS) + 5) / 6;
-
-	return RetSS;
-}
-
-/*
- * Translate 0-100 signal strength index into dBm.
- */
-static long TranslateToDbm8185(u8 SignalStrengthIndex)
-{
-	long SignalPower;
-
-	/* Translate to dBm (x=0.5y-95). */
-	SignalPower = (long)((SignalStrengthIndex + 1) >> 1);
-	SignalPower -= 95;
-
-	return SignalPower;
-}
-
-/*
- * Perform signal smoothing for dynamic mechanism.
- * This is different with PerformSignalSmoothing8185 in smoothing formula.
- * No dramatic adjustment is applied because dynamic mechanism need some
- * degree of correctness. Ported from 8187B.
- */
-static void PerformUndecoratedSignalSmoothing8185(struct r8180_priv *priv,
-						  bool bCckRate)
-{
-	long smoothedSS;
-	long smoothedRx;
-
-	/* Determine the current packet is CCK rate. */
-	priv->bCurCCKPkt = bCckRate;
-
-	smoothedSS = priv->SignalStrength * 10;
-
-	if (priv->UndecoratedSmoothedSS >= 0)
-		smoothedSS = ((priv->UndecoratedSmoothedSS * 5) +
-				smoothedSS) / 6;
-
-	priv->UndecoratedSmoothedSS = smoothedSS;
-
-	smoothedRx = ((priv->UndecoratedSmoothedRxPower * 50) +
-			(priv->RxPower * 11)) / 60;
-
-	priv->UndecoratedSmoothedRxPower = smoothedRx;
-
-	if (bCckRate)
-		priv->CurCCKRSSI = priv->RSSI;
-	else
-		priv->CurCCKRSSI = 0;
-}
-
-
-/*
- * This is rough RX isr handling routine
- */
-static void rtl8180_rx(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	struct sk_buff *tmp_skb;
-	short first, last;
-	u32 len;
-	int lastlen;
-	unsigned char quality, signal;
-	u8 rate;
-	u32 *tmp, *tmp2;
-	u8 rx_desc_size;
-	u8 padding;
-	char rxpower = 0;
-	u32 RXAGC = 0;
-	long RxAGC_dBm = 0;
-	u8	LNA = 0, BB = 0;
-	u8	LNA_gain[4] = {02, 17, 29, 39};
-	u8  Antenna = 0;
-	struct ieee80211_hdr_4addr *hdr;
-	u16 fc, type;
-	u8 bHwError = 0, bCRC = 0, bICV = 0;
-	bool	bCckRate = false;
-	u8     RSSI = 0;
-	long	SignalStrengthIndex = 0;
-	struct ieee80211_rx_stats stats = {
-		.signal = 0,
-		.noise = -98,
-		.rate = 0,
-		.freq = IEEE80211_24GHZ_BAND,
-	};
-
-	stats.nic_type = NIC_8185B;
-	rx_desc_size = 8;
-
-	if ((*(priv->rxringtail)) & (1<<31)) {
-		/* we have got an RX int, but the descriptor. we are pointing
-		 * is empty.
-		 */
-
-		priv->stats.rxnodata++;
-		priv->ieee80211->stats.rx_errors++;
-
-		tmp2 = NULL;
-		tmp = priv->rxringtail;
-		do {
-			if (tmp == priv->rxring)
-				tmp  = priv->rxring + (priv->rxringcount - 1) *
-					rx_desc_size;
-			else
-				tmp -= rx_desc_size;
-
-			if (!(*tmp & (1<<31)))
-				tmp2 = tmp;
-		} while (tmp != priv->rxring);
-
-		if (tmp2)
-			priv->rxringtail = tmp2;
-	}
-
-	/* while there are filled descriptors */
-	while (!(*(priv->rxringtail) & (1<<31))) {
-		if (*(priv->rxringtail) & (1<<26))
-			DMESGW("RX buffer overflow");
-		if (*(priv->rxringtail) & (1<<12))
-			priv->stats.rxicverr++;
-
-		if (*(priv->rxringtail) & (1<<27)) {
-			priv->stats.rxdmafail++;
-			goto drop;
-		}
-
-		pci_dma_sync_single_for_cpu(priv->pdev,
-				    priv->rxbuffer->dma,
-				    priv->rxbuffersize * sizeof(u8),
-				    PCI_DMA_FROMDEVICE);
-
-		first = *(priv->rxringtail) & (1<<29) ? 1 : 0;
-		if (first)
-			priv->rx_prevlen = 0;
-
-		last = *(priv->rxringtail) & (1<<28) ? 1 : 0;
-		if (last) {
-			lastlen = ((*priv->rxringtail) & 0xfff);
-
-			/* if the last descriptor (that should tell us the total
-			 * packet len) tell us something less than the
-			 * descriptors len we had until now, then there is some
-			 * problem..
-			 * workaround to prevent kernel panic
-			 */
-			if (lastlen < priv->rx_prevlen)
-				len = 0;
-			else
-				len = lastlen-priv->rx_prevlen;
-
-			if (*(priv->rxringtail) & (1<<13)) {
-				if ((*(priv->rxringtail) & 0xfff) < 500)
-					priv->stats.rxcrcerrmin++;
-				else if ((*(priv->rxringtail) & 0x0fff) > 1000)
-					priv->stats.rxcrcerrmax++;
-				else
-					priv->stats.rxcrcerrmid++;
-
-			}
-
-		} else {
-			len = priv->rxbuffersize;
-		}
-
-		if (first && last) {
-			padding = ((*(priv->rxringtail+3))&(0x04000000))>>26;
-		} else if (first) {
-			padding = ((*(priv->rxringtail+3))&(0x04000000))>>26;
-			if (padding)
-				len -= 2;
-		} else {
-			padding = 0;
-		}
-		padding = 0;
-		priv->rx_prevlen += len;
-
-		if (priv->rx_prevlen > MAX_FRAG_THRESHOLD + 100) {
-			/* HW is probably passing several buggy frames without
-			 * FD or LD flag set.
-			 * Throw this garbage away to prevent skb memory
-			 * exhausting
-			 */
-			if (!priv->rx_skb_complete)
-				dev_kfree_skb_any(priv->rx_skb);
-			priv->rx_skb_complete = 1;
-		}
-
-		signal = (unsigned char)((*(priv->rxringtail + 3) &
-			0x00ff0000) >> 16);
-		signal = (signal & 0xfe) >> 1;
-
-		quality = (unsigned char)((*(priv->rxringtail+3)) & (0xff));
-
-		stats.mac_time[0] = *(priv->rxringtail+1);
-		stats.mac_time[1] = *(priv->rxringtail+2);
-
-		rxpower = ((char)((*(priv->rxringtail + 4) &
-			0x00ff0000) >> 16)) / 2 - 42;
-
-		RSSI = ((u8)((*(priv->rxringtail + 3) &
-			0x0000ff00) >> 8)) & 0x7f;
-
-		rate = ((*(priv->rxringtail)) &
-			((1<<23)|(1<<22)|(1<<21)|(1<<20)))>>20;
-
-		stats.rate = rtl8180_rate2rate(rate);
-		Antenna = (*(priv->rxringtail + 3) & 0x00008000) == 0 ? 0 : 1;
-		if (!rtl8180_IsWirelessBMode(stats.rate)) { /* OFDM rate. */
-			RxAGC_dBm = rxpower+1;	/* bias */
-		} else { /* CCK rate. */
-			RxAGC_dBm = signal; /* bit 0 discard */
-
-			LNA = (u8) (RxAGC_dBm & 0x60) >> 5; /* bit 6~ bit 5 */
-			BB  = (u8) (RxAGC_dBm & 0x1F); /* bit 4 ~ bit 0 */
-
-			/* Pin_11b=-(LNA_gain+BB_gain) (dBm) */
-			RxAGC_dBm = -(LNA_gain[LNA] + (BB * 2));
-
-			RxAGC_dBm += 4; /* bias */
-		}
-
-		if (RxAGC_dBm & 0x80) /* absolute value */
-			RXAGC = ~(RxAGC_dBm)+1;
-		bCckRate = rtl8180_IsWirelessBMode(stats.rate);
-		/* Translate RXAGC into 1-100. */
-		if (!rtl8180_IsWirelessBMode(stats.rate)) { /* OFDM rate. */
-			if (RXAGC > 90)
-				RXAGC = 90;
-			else if (RXAGC < 25)
-				RXAGC = 25;
-			RXAGC = (90-RXAGC)*100/65;
-		} else { /* CCK rate. */
-			if (RXAGC > 95)
-				RXAGC = 95;
-			else if (RXAGC < 30)
-				RXAGC = 30;
-			RXAGC = (95-RXAGC)*100/65;
-		}
-		priv->SignalStrength = (u8)RXAGC;
-		priv->RecvSignalPower = RxAGC_dBm;
-		priv->RxPower = rxpower;
-		priv->RSSI = RSSI;
-		/* SQ translation formula is provided by SD3 DZ. 2006.06.27 */
-		if (quality >= 127)
-			/* 0 causes epc to show signal zero, walk around now */
-			quality = 1;
-		else if (quality < 27)
-			quality = 100;
-		else
-			quality = 127 - quality;
-		priv->SignalQuality = quality;
-
-		stats.signal = (u8) quality;
-
-		stats.signalstrength = RXAGC;
-		if (stats.signalstrength > 100)
-			stats.signalstrength = 100;
-		stats.signalstrength = (stats.signalstrength * 70) / 100 + 30;
-		stats.rssi = priv->wstats.qual.qual = priv->SignalQuality;
-		stats.noise = priv->wstats.qual.noise =
-			100 - priv->wstats.qual.qual;
-		bHwError = (((*(priv->rxringtail)) & (0x00000fff)) == 4080) |
-			   (((*(priv->rxringtail)) & (0x04000000)) != 0) |
-			   (((*(priv->rxringtail)) & (0x08000000)) != 0) |
-			   (((~(*(priv->rxringtail))) & (0x10000000)) != 0) |
-			   (((~(*(priv->rxringtail))) & (0x20000000)) != 0);
-		bCRC = ((*(priv->rxringtail)) & (0x00002000)) >> 13;
-		bICV = ((*(priv->rxringtail)) & (0x00001000)) >> 12;
-		hdr = (struct ieee80211_hdr_4addr *)priv->rxbuffer->buf;
-		    fc = le16_to_cpu(hdr->frame_ctl);
-		type = WLAN_FC_GET_TYPE(fc);
-
-		if (IEEE80211_FTYPE_CTL != type &&
-		    !bHwError && !bCRC && !bICV &&
-		    eqMacAddr(priv->ieee80211->current_network.bssid,
-			fc & IEEE80211_FCTL_TODS ? hdr->addr1 :
-			fc & IEEE80211_FCTL_FROMDS ? hdr->addr2 :
-			hdr->addr3)) {
-
-			/* Perform signal smoothing for dynamic
-			 * mechanism on demand. This is different
-			 * with PerformSignalSmoothing8185 in smoothing
-			 * fomula. No dramatic adjustion is apply
-			 * because dynamic mechanism need some degree
-			 * of correctness. */
-			PerformUndecoratedSignalSmoothing8185(priv, bCckRate);
-
-			/* For good-looking singal strength. */
-			SignalStrengthIndex = NetgearSignalStrengthTranslate(
-				priv->LastSignalStrengthInPercent,
-				priv->SignalStrength);
-
-			priv->LastSignalStrengthInPercent = SignalStrengthIndex;
-			priv->Stats_SignalStrength =
-				TranslateToDbm8185((u8)SignalStrengthIndex);
-
-			/*
-			 * We need more correct power of received packets and
-			 * the "SignalStrength" of RxStats is beautified, so we
-			 * record the correct power here.
-			 */
-
-			priv->Stats_SignalQuality = (long)(
-				priv->Stats_SignalQuality * 5 +
-				(long)priv->SignalQuality + 5) / 6;
-
-			priv->Stats_RecvSignalPower = (long)(
-				priv->Stats_RecvSignalPower * 5 +
-				priv->RecvSignalPower - 1) / 6;
-
-			/*
-			 * Figure out which antenna received the last packet.
-			 * 0: aux, 1: main
-			 */
-			priv->LastRxPktAntenna = Antenna ? 1 : 0;
-			SwAntennaDiversityRxOk8185(dev, priv->SignalStrength);
-		}
-
-		if (first) {
-			if (!priv->rx_skb_complete) {
-				/* seems that HW sometimes fails to receive and
-				 * doesn't provide the last descriptor.
-				 */
-				dev_kfree_skb_any(priv->rx_skb);
-				priv->stats.rxnolast++;
-			}
-			priv->rx_skb = dev_alloc_skb(len+2);
-			if (!priv->rx_skb)
-				goto drop;
-
-			priv->rx_skb_complete = 0;
-			priv->rx_skb->dev = dev;
-		} else {
-			/* if we are here we should have already RXed the first
-			 * frame.
-			 * If we get here and the skb is not allocated then
-			 * we have just throw out garbage (skb not allocated)
-			 * and we are still rxing garbage....
-			 */
-			if (!priv->rx_skb_complete) {
-
-				tmp_skb = dev_alloc_skb(
-					priv->rx_skb->len + len + 2);
-
-				if (!tmp_skb)
-					goto drop;
-
-				tmp_skb->dev = dev;
-
-				memcpy(skb_put(tmp_skb, priv->rx_skb->len),
-					priv->rx_skb->data,
-					priv->rx_skb->len);
-
-				dev_kfree_skb_any(priv->rx_skb);
-
-				priv->rx_skb = tmp_skb;
-			}
-		}
-
-		if (!priv->rx_skb_complete) {
-			memcpy(skb_put(priv->rx_skb, len), ((unsigned char *)
-				priv->rxbuffer->buf) + (padding ? 2 : 0), len);
-		}
-
-		if (last && !priv->rx_skb_complete) {
-			if (priv->rx_skb->len > 4)
-				skb_trim(priv->rx_skb, priv->rx_skb->len-4);
-			if (!ieee80211_rtl_rx(priv->ieee80211,
-					 priv->rx_skb, &stats))
-				dev_kfree_skb_any(priv->rx_skb);
-			priv->rx_skb_complete = 1;
-		}
-
-		pci_dma_sync_single_for_device(priv->pdev,
-				    priv->rxbuffer->dma,
-				    priv->rxbuffersize * sizeof(u8),
-				    PCI_DMA_FROMDEVICE);
-
-drop: /* this is used when we have not enough mem */
-		/* restore the descriptor */
-		*(priv->rxringtail+2) = priv->rxbuffer->dma;
-		*(priv->rxringtail) = *(priv->rxringtail) & ~0xfff;
-		*(priv->rxringtail) =
-			*(priv->rxringtail) | priv->rxbuffersize;
-
-		*(priv->rxringtail) =
-			*(priv->rxringtail) | (1<<31);
-
-		priv->rxringtail += rx_desc_size;
-		if (priv->rxringtail >=
-		   (priv->rxring)+(priv->rxringcount)*rx_desc_size)
-			priv->rxringtail = priv->rxring;
-
-		priv->rxbuffer = (priv->rxbuffer->next);
-	}
-}
-
-
-static void rtl8180_dma_kick(struct net_device *dev, int priority)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
-	rtl8180_set_mode(dev, EPROM_CMD_CONFIG);
-	write_nic_byte(dev, TX_DMA_POLLING,
-			(1 << (priority + 1)) | priv->dma_poll_mask);
-	rtl8180_set_mode(dev, EPROM_CMD_NORMAL);
-
-	force_pci_posting(dev);
-}
-
-static void rtl8180_data_hard_stop(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
-	rtl8180_set_mode(dev, EPROM_CMD_CONFIG);
-	priv->dma_poll_stop_mask |= TPPOLLSTOP_AC_VIQ;
-	write_nic_byte(dev, TPPollStop, priv->dma_poll_stop_mask);
-	rtl8180_set_mode(dev, EPROM_CMD_NORMAL);
-}
-
-static void rtl8180_data_hard_resume(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
-	rtl8180_set_mode(dev, EPROM_CMD_CONFIG);
-	priv->dma_poll_stop_mask &= ~(TPPOLLSTOP_AC_VIQ);
-	write_nic_byte(dev, TPPollStop, priv->dma_poll_stop_mask);
-	rtl8180_set_mode(dev, EPROM_CMD_NORMAL);
-}
-
-/*
- * This function TX data frames when the ieee80211 stack requires this.
- * It checks also if we need to stop the ieee tx queue, eventually do it
- */
-static void rtl8180_hard_data_xmit(struct sk_buff *skb, struct net_device *dev,
-				   int rate)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	int mode;
-	struct ieee80211_hdr_3addr *h = (struct ieee80211_hdr_3addr *)skb->data;
-	bool morefrag = le16_to_cpu(h->frame_control) & IEEE80211_FCTL_MOREFRAGS;
-	unsigned long flags;
-	int priority;
-
-	mode = priv->ieee80211->iw_mode;
-
-	rate = ieeerate2rtlrate(rate);
-	/*
-	 * This function doesn't require lock because we make sure it's called
-	 * with the tx_lock already acquired.
-	 * This come from the kernel's hard_xmit callback (through the ieee
-	 * stack, or from the try_wake_queue (again through the ieee stack.
-	 */
-	priority = AC2Q(skb->priority);
-	spin_lock_irqsave(&priv->tx_lock, flags);
-
-	if (priv->ieee80211->bHwRadioOff) {
-		spin_unlock_irqrestore(&priv->tx_lock, flags);
-
-		return;
-	}
-
-	if (!check_nic_enought_desc(dev, priority)) {
-		DMESGW("Error: no descriptor left by previous TX (avail %d) ",
-			get_curr_tx_free_desc(dev, priority));
-		ieee80211_rtl_stop_queue(priv->ieee80211);
-	}
-	rtl8180_tx(dev, skb->data, skb->len, priority, morefrag, 0, rate);
-	if (!check_nic_enought_desc(dev, priority))
-		ieee80211_rtl_stop_queue(priv->ieee80211);
-
-	spin_unlock_irqrestore(&priv->tx_lock, flags);
-}
-
-/*
- * This is a rough attempt to TX a frame
- * This is called by the ieee 80211 stack to TX management frames.
- * If the ring is full packets are dropped (for data frame the queue
- * is stopped before this can happen). For this reason it is better
- * if the descriptors are larger than the largest management frame
- * we intend to TX: i'm unsure what the HW does if it will not find
- * the last fragment of a frame because it has been dropped...
- * Since queues for Management and Data frames are different we
- * might use a different lock than tx_lock (for example mgmt_tx_lock)
- */
-/* these function may loop if invoked with 0 descriptors or 0 len buffer */
-static int rtl8180_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	unsigned long flags;
-	int priority;
-
-	priority = MANAGE_PRIORITY;
-
-	spin_lock_irqsave(&priv->tx_lock, flags);
-
-	if (priv->ieee80211->bHwRadioOff) {
-		spin_unlock_irqrestore(&priv->tx_lock, flags);
-		dev_kfree_skb_any(skb);
-		return NETDEV_TX_OK;
-	}
-
-	rtl8180_tx(dev, skb->data, skb->len, priority,
-		0, 0, ieeerate2rtlrate(priv->ieee80211->basic_rate));
-
-	priv->ieee80211->stats.tx_bytes += skb->len;
-	priv->ieee80211->stats.tx_packets++;
-	spin_unlock_irqrestore(&priv->tx_lock, flags);
-
-	dev_kfree_skb_any(skb);
-	return NETDEV_TX_OK;
-}
-
-static void rtl8180_prepare_beacon(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	struct sk_buff *skb;
-
-	u16 word  = read_nic_word(dev, BcnItv);
-	word &= ~BcnItv_BcnItv; /* clear Bcn_Itv */
-
-	/* word |= 0x64; */
-	word |= cpu_to_le16(priv->ieee80211->current_network.beacon_interval);
-
-	write_nic_word(dev, BcnItv, word);
-
-	skb = ieee80211_get_beacon(priv->ieee80211);
-	if (skb) {
-		rtl8180_tx(dev, skb->data, skb->len, BEACON_PRIORITY,
-			0, 0, ieeerate2rtlrate(priv->ieee80211->basic_rate));
-		dev_kfree_skb_any(skb);
-	}
-}
-
-/*
- * This function do the real dirty work: it enqueues a TX command descriptor in
- * the ring buffer, copyes the frame in a TX buffer and kicks the NIC to ensure
- * it does the DMA transfer.
- */
-short rtl8180_tx(struct net_device *dev, u8 *txbuf, int len, int priority,
-		 bool morefrag, short descfrag, int rate)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	u32 *tail, *temp_tail;
-	u32 *begin;
-	u32 *buf;
-	int i;
-	int remain;
-	int buflen;
-	int count;
-	struct buffer *buflist;
-	struct ieee80211_hdr_3addr *frag_hdr =
-		(struct ieee80211_hdr_3addr *)txbuf;
-	u8 dest[ETH_ALEN];
-	u8 bUseShortPreamble = 0;
-	u8 bCTSEnable = 0;
-	u8 bRTSEnable = 0;
-	u16 Duration = 0;
-	u16 RtsDur = 0;
-	u16 ThisFrameTime = 0;
-	u16 TxDescDuration = 0;
-	bool ownbit_flag = false;
-
-	switch (priority) {
-	case MANAGE_PRIORITY:
-		tail = priv->txmapringtail;
-		begin = priv->txmapring;
-		buflist = priv->txmapbufstail;
-		count = priv->txringcount;
-		break;
-	case BK_PRIORITY:
-		tail = priv->txbkpringtail;
-		begin = priv->txbkpring;
-		buflist = priv->txbkpbufstail;
-		count = priv->txringcount;
-		break;
-	case BE_PRIORITY:
-		tail = priv->txbepringtail;
-		begin = priv->txbepring;
-		buflist = priv->txbepbufstail;
-		count = priv->txringcount;
-		break;
-	case VI_PRIORITY:
-		tail = priv->txvipringtail;
-		begin = priv->txvipring;
-		buflist = priv->txvipbufstail;
-		count = priv->txringcount;
-		break;
-	case VO_PRIORITY:
-		tail = priv->txvopringtail;
-		begin = priv->txvopring;
-		buflist = priv->txvopbufstail;
-		count = priv->txringcount;
-		break;
-	case HI_PRIORITY:
-		tail = priv->txhpringtail;
-		begin = priv->txhpring;
-		buflist = priv->txhpbufstail;
-		count = priv->txringcount;
-		break;
-	case BEACON_PRIORITY:
-		tail = priv->txbeaconringtail;
-		begin = priv->txbeaconring;
-		buflist = priv->txbeaconbufstail;
-		count = priv->txbeaconcount;
-		break;
-	default:
-		return -1;
-		break;
-	}
-
-	memcpy(&dest, frag_hdr->addr1, ETH_ALEN);
-	if (is_multicast_ether_addr(dest)) {
-		Duration = 0;
-		RtsDur = 0;
-		bRTSEnable = 0;
-		bCTSEnable = 0;
-
-		ThisFrameTime = ComputeTxTime(len + sCrcLng,
-			rtl8180_rate2rate(rate), 0, bUseShortPreamble);
-		TxDescDuration = ThisFrameTime;
-	} else { /* Unicast packet */
-		u16 AckTime;
-
-		/* for Keep alive */
-		priv->NumTxUnicast++;
-
-		/* Figure out ACK rate according to BSS basic rate
-		 * and Tx rate.
-		 * AckCTSLng = 14 use 1M bps send
-		 */
-		AckTime = ComputeTxTime(14, 10, 0, 0);
-
-		if (((len + sCrcLng) > priv->rts) && priv->rts) { /* RTS/CTS. */
-			u16 RtsTime, CtsTime;
-			bRTSEnable = 1;
-			bCTSEnable = 0;
-
-			/* Rate and time required for RTS. */
-			RtsTime = ComputeTxTime(sAckCtsLng / 8,
-				priv->ieee80211->basic_rate, 0, 0);
-
-			/* Rate and time required for CTS.
-			 * AckCTSLng = 14 use 1M bps send
-			 */
-			CtsTime = ComputeTxTime(14, 10, 0, 0);
-
-			/* Figure out time required to transmit this frame. */
-			ThisFrameTime = ComputeTxTime(len + sCrcLng,
-				rtl8180_rate2rate(rate), 0,
-				bUseShortPreamble);
-
-			/* RTS-CTS-ThisFrame-ACK. */
-			RtsDur = CtsTime + ThisFrameTime +
-				AckTime + 3 * aSifsTime;
-
-			TxDescDuration = RtsTime + RtsDur;
-		} else { /* Normal case. */
-			bCTSEnable = 0;
-			bRTSEnable = 0;
-			RtsDur = 0;
-
-			ThisFrameTime = ComputeTxTime(len + sCrcLng,
-				rtl8180_rate2rate(rate), 0, bUseShortPreamble);
-			TxDescDuration = ThisFrameTime + aSifsTime + AckTime;
-		}
-
-		if (!(le16_to_cpu(frag_hdr->frame_control) & IEEE80211_FCTL_MOREFRAGS)) {
-			/* ThisFrame-ACK. */
-			Duration = aSifsTime + AckTime;
-		} else { /* One or more fragments remained. */
-			u16 NextFragTime;
-
-			/* pretend following packet length = current packet */
-			NextFragTime = ComputeTxTime(len + sCrcLng,
-				rtl8180_rate2rate(rate), 0, bUseShortPreamble);
-
-			/* ThisFrag-ACk-NextFrag-ACK. */
-			Duration = NextFragTime + 3 * aSifsTime + 2 * AckTime;
-		}
-
-	} /* End of Unicast packet */
-
-	frag_hdr->duration_id = Duration;
-
-	buflen = priv->txbuffsize;
-	remain = len;
-	temp_tail = tail;
-
-	while (remain != 0) {
-		mb();
-		if (!buflist) {
-			DMESGE("TX buffer error, cannot TX frames. pri %d.",
-				priority);
-			return -1;
-		}
-		buf = buflist->buf;
-
-		if ((*tail & (1 << 31)) && (priority != BEACON_PRIORITY)) {
-			DMESGW("No more TX desc, returning %x of %x",
-			       remain, len);
-			priv->stats.txrdu++;
-			return remain;
-		}
-
-		*tail = 0; /* zeroes header */
-		*(tail+1) = 0;
-		*(tail+3) = 0;
-		*(tail+5) = 0;
-		*(tail+6) = 0;
-		*(tail+7) = 0;
-
-		/* FIXME: should be triggered by HW encryption parameters.*/
-		*tail |= (1<<15); /* no encrypt */
-
-		if (remain == len && !descfrag) {
-			ownbit_flag = false;
-			*tail = *tail | (1 << 29); /* first segment of packet */
-			*tail = *tail | (len);
-		} else {
-			ownbit_flag = true;
-		}
-
-		for (i = 0; i < buflen && remain > 0; i++, remain--) {
-			/* copy data into descriptor pointed DMAble buffer */
-			((u8 *)buf)[i] = txbuf[i];
-
-			if (remain == 4 && i+4 >= buflen)
-				break;
-			/* ensure the last desc has at least 4 bytes payload */
-		}
-		txbuf = txbuf + i;
-		*(tail+3) = *(tail+3) & ~0xfff;
-		*(tail+3) = *(tail+3) | i; /* buffer length */
-
-		if (bCTSEnable)
-			*tail |= (1<<18);
-
-		if (bRTSEnable) { /* rts enable */
-			/* RTS RATE */
-			*tail |= (ieeerate2rtlrate(
-				priv->ieee80211->basic_rate) << 19);
-
-			*tail |= (1<<23); /* rts enable */
-			*(tail+1) |= (RtsDur&0xffff); /* RTS Duration */
-		}
-		*(tail+3) |= ((TxDescDuration&0xffff)<<16); /* DURATION */
-
-		*(tail + 5) |= (11 << 8); /* retry lim; */
-
-		*tail = *tail | ((rate&0xf) << 24);
-
-		if (morefrag)
-			*tail = (*tail) | (1<<17); /* more fragment */
-		if (!remain)
-			*tail = (*tail) | (1<<28); /* last segment of frame */
-
-		*(tail+5) = *(tail+5)|(2<<27);
-		*(tail+7) = *(tail+7)|(1<<4);
-
-		wmb();
-		if (ownbit_flag)
-			/* descriptor ready to be txed */
-			*tail |= (1 << 31);
-
-		if ((tail - begin)/8 == count-1)
-			tail = begin;
-		else
-			tail = tail+8;
-
-		buflist = buflist->next;
-
-		mb();
-
-		switch (priority) {
-		case MANAGE_PRIORITY:
-			priv->txmapringtail = tail;
-			priv->txmapbufstail = buflist;
-			break;
-		case BK_PRIORITY:
-			priv->txbkpringtail = tail;
-			priv->txbkpbufstail = buflist;
-			break;
-		case BE_PRIORITY:
-			priv->txbepringtail = tail;
-			priv->txbepbufstail = buflist;
-			break;
-		case VI_PRIORITY:
-			priv->txvipringtail = tail;
-			priv->txvipbufstail = buflist;
-			break;
-		case VO_PRIORITY:
-			priv->txvopringtail = tail;
-			priv->txvopbufstail = buflist;
-			break;
-		case HI_PRIORITY:
-			priv->txhpringtail = tail;
-			priv->txhpbufstail = buflist;
-			break;
-		case BEACON_PRIORITY:
-			/*
-			 * The HW seems to be happy with the 1st
-			 * descriptor filled and the 2nd empty...
-			 * So always update descriptor 1 and never
-			 * touch 2nd
-			 */
-			break;
-		}
-	}
-	*temp_tail = *temp_tail | (1<<31); /* descriptor ready to be txed */
-	rtl8180_dma_kick(dev, priority);
-
-	return 0;
-}
-
-void rtl8180_irq_rx_tasklet(struct r8180_priv *priv);
-
-static void rtl8180_link_change(struct net_device *dev)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	u16 beacon_interval;
-	struct ieee80211_network *net = &priv->ieee80211->current_network;
-
-	rtl8180_update_msr(dev);
-
-	rtl8180_set_mode(dev, EPROM_CMD_CONFIG);
-
-	write_nic_dword(dev, BSSID, ((u32 *)net->bssid)[0]);
-	write_nic_word(dev, BSSID+4, ((u16 *)net->bssid)[2]);
-
-	beacon_interval  = read_nic_word(dev, BEACON_INTERVAL);
-	beacon_interval &= ~BEACON_INTERVAL_MASK;
-	beacon_interval |= net->beacon_interval;
-	write_nic_word(dev, BEACON_INTERVAL, beacon_interval);
-
-	rtl8180_set_mode(dev, EPROM_CMD_NORMAL);
-
-	rtl8180_set_chan(dev, priv->chan);
-}
-
-static void rtl8180_rq_tx_ack(struct net_device *dev)
-{
-
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	write_nic_byte(dev, CONFIG4,
-		read_nic_byte(dev, CONFIG4) | CONFIG4_PWRMGT);
-	priv->ack_tx_to_ieee = 1;
-}
-
-static short rtl8180_is_tx_queue_empty(struct net_device *dev)
-{
-
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	u32 *d;
-
-	for (d = priv->txmapring;
-		d < priv->txmapring + priv->txringcount; d += 8)
-			if (*d & (1<<31))
-				return 0;
-
-	for (d = priv->txbkpring;
-		d < priv->txbkpring + priv->txringcount; d += 8)
-			if (*d & (1<<31))
-				return 0;
-
-	for (d = priv->txbepring;
-		d < priv->txbepring + priv->txringcount; d += 8)
-			if (*d & (1<<31))
-				return 0;
-
-	for (d = priv->txvipring;
-		d < priv->txvipring + priv->txringcount; d += 8)
-			if (*d & (1<<31))
-				return 0;
-
-	for (d = priv->txvopring;
-		d < priv->txvopring + priv->txringcount; d += 8)
-			if (*d & (1<<31))
-				return 0;
-
-	for (d = priv->txhpring;
-		d < priv->txhpring + priv->txringcount; d += 8)
-			if (*d & (1<<31))
-				return 0;
-	return 1;
-}
-
-static void rtl8180_hw_wakeup(struct net_device *dev)
-{
-	unsigned long flags;
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	spin_lock_irqsave(&priv->ps_lock, flags);
-	write_nic_byte(dev, CONFIG4,
-		read_nic_byte(dev, CONFIG4) & ~CONFIG4_PWRMGT);
-	if (priv->rf_wakeup)
-		priv->rf_wakeup(dev);
-	spin_unlock_irqrestore(&priv->ps_lock, flags);
-}
-
-static void rtl8180_hw_sleep_down(struct net_device *dev)
-{
-	unsigned long flags;
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	spin_lock_irqsave(&priv->ps_lock, flags);
-	if (priv->rf_sleep)
-		priv->rf_sleep(dev);
-	spin_unlock_irqrestore(&priv->ps_lock, flags);
-}
-
-static void rtl8180_hw_sleep(struct net_device *dev, u32 th, u32 tl)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	u32 rb = jiffies;
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->ps_lock, flags);
-
-	/*
-	 * Writing HW register with 0 equals to disable
-	 * the timer, that is not really what we want
-	 */
-	tl -= MSECS(4+16+7);
-
-	/*
-	 * If the interval in which we are requested to sleep is too
-	 * short then give up and remain awake
-	 */
-	if (((tl >= rb) && (tl-rb) <= MSECS(MIN_SLEEP_TIME))
-		|| ((rb > tl) && (rb-tl) < MSECS(MIN_SLEEP_TIME))) {
-		spin_unlock_irqrestore(&priv->ps_lock, flags);
-		netdev_warn(dev, "too short to sleep\n");
-		return;
-	}
-
-	{
-		u32 tmp = (tl > rb) ? (tl-rb) : (rb-tl);
-
-		priv->DozePeriodInPast2Sec += jiffies_to_msecs(tmp);
-		/* as tl may be less than rb */
-		queue_delayed_work(priv->ieee80211->wq,
-			&priv->ieee80211->hw_wakeup_wq, tmp);
-	}
-	/*
-	 * If we suspect the TimerInt is gone beyond tl
-	 * while setting it, then give up
-	 */
-
-	if (((tl > rb) && ((tl-rb) > MSECS(MAX_SLEEP_TIME))) ||
-		((tl < rb) && ((rb-tl) > MSECS(MAX_SLEEP_TIME)))) {
-		spin_unlock_irqrestore(&priv->ps_lock, flags);
-		return;
-	}
-
-	queue_work(priv->ieee80211->wq, (void *)&priv->ieee80211->hw_sleep_wq);
-	spin_unlock_irqrestore(&priv->ps_lock, flags);
-}
-
-static void rtl8180_wmm_single_param_update(struct net_device *dev,
-	u8 mode, AC_CODING eACI, PAC_PARAM param)
-{
-	u8 u1bAIFS;
-	u32 u4bAcParam;
-
-	/* Retrieve parameters to update. */
-	/* Mode G/A: slotTimeTimer = 9; Mode B: 20 */
-	u1bAIFS = param->f.AciAifsn.f.AIFSN * ((mode & IEEE_G) == IEEE_G ?
-		9 : 20) + aSifsTime;
-	u4bAcParam = (((u32)param->f.TXOPLimit << AC_PARAM_TXOP_LIMIT_OFFSET) |
-		((u32)param->f.Ecw.f.ECWmax << AC_PARAM_ECW_MAX_OFFSET) |
-		((u32)param->f.Ecw.f.ECWmin << AC_PARAM_ECW_MIN_OFFSET) |
-		((u32)u1bAIFS << AC_PARAM_AIFS_OFFSET));
-
-	switch (eACI) {
-	case AC1_BK:
-		write_nic_dword(dev, AC_BK_PARAM, u4bAcParam);
-		return;
-	case AC0_BE:
-		write_nic_dword(dev, AC_BE_PARAM, u4bAcParam);
-		return;
-	case AC2_VI:
-		write_nic_dword(dev, AC_VI_PARAM, u4bAcParam);
-		return;
-	case AC3_VO:
-		write_nic_dword(dev, AC_VO_PARAM, u4bAcParam);
-		return;
-	default:
-		pr_warn("SetHwReg8185(): invalid ACI: %d!\n", eACI);
-		return;
-	}
-}
-
-static void rtl8180_wmm_param_update(struct work_struct *work)
-{
-	struct ieee80211_device *ieee = container_of(work,
-		struct ieee80211_device, wmm_param_update_wq);
-	struct net_device *dev = ieee->dev;
-	u8 *ac_param = (u8 *)(ieee->current_network.wmm_param);
-	u8 mode = ieee->current_network.mode;
-	AC_CODING eACI;
-	AC_PARAM AcParam;
-
-	if (!ieee->current_network.QoS_Enable) {
-		/* legacy ac_xx_param update */
-		AcParam.longData = 0;
-		AcParam.f.AciAifsn.f.AIFSN = 2; /* Follow 802.11 DIFS. */
-		AcParam.f.AciAifsn.f.ACM = 0;
-		AcParam.f.Ecw.f.ECWmin = 3; /* Follow 802.11 CWmin. */
-		AcParam.f.Ecw.f.ECWmax = 7; /* Follow 802.11 CWmax. */
-		AcParam.f.TXOPLimit = 0;
-
-		for (eACI = 0; eACI < AC_MAX; eACI++) {
-			AcParam.f.AciAifsn.f.ACI = (u8)eACI;
-
-			rtl8180_wmm_single_param_update(dev, mode, eACI,
-				(PAC_PARAM)&AcParam);
-		}
-		return;
-	}
-
-	for (eACI = 0; eACI < AC_MAX; eACI++) {
-		rtl8180_wmm_single_param_update(dev, mode,
-			((PAC_PARAM)ac_param)->f.AciAifsn.f.ACI,
-			(PAC_PARAM)ac_param);
-
-		ac_param += sizeof(AC_PARAM);
-	}
-}
-
-void rtl8180_restart_wq(struct work_struct *work);
-void rtl8180_watch_dog_wq(struct work_struct *work);
-void rtl8180_hw_wakeup_wq(struct work_struct *work);
-void rtl8180_hw_sleep_wq(struct work_struct *work);
-void rtl8180_sw_antenna_wq(struct work_struct *work);
-void rtl8180_watch_dog(struct net_device *dev);
-
-static void watch_dog_adaptive(unsigned long data)
-{
-	struct r8180_priv *priv = ieee80211_priv((struct net_device *)data);
-
-	if (!priv->up) {
-		DMESG("<----watch_dog_adaptive():driver is not up!\n");
-		return;
-	}
-
-	/* Tx High Power Mechanism. */
-	if (CheckHighPower((struct net_device *)data))
-		queue_work(priv->ieee80211->wq,
-			(void *)&priv->ieee80211->tx_pw_wq);
-
-	/* Tx Power Tracking on 87SE. */
-	if (CheckTxPwrTracking((struct net_device *)data))
-		TxPwrTracking87SE((struct net_device *)data);
-
-	/* Perform DIG immediately. */
-	if (CheckDig((struct net_device *)data))
-		queue_work(priv->ieee80211->wq,
-			(void *)&priv->ieee80211->hw_dig_wq);
-
-	rtl8180_watch_dog((struct net_device *)data);
-
-	queue_work(priv->ieee80211->wq,
-		(void *)&priv->ieee80211->GPIOChangeRFWorkItem);
-
-	priv->watch_dog_timer.expires = jiffies +
-		MSECS(IEEE80211_WATCH_DOG_TIME);
-
-	add_timer(&priv->watch_dog_timer);
-}
-
-static struct rtl8187se_channel_list channel_plan_list[] = {
-	/* FCC */
-	{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40,
-		44, 48, 52, 56, 60, 64}, 19},
-
-	/* IC */
-	{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11}, 11},
-
-	/* ETSI */
-	{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40,
-		44, 48, 52, 56, 60, 64}, 21},
-
-	/* Spain. Change to ETSI. */
-	{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40,
-		44, 48, 52, 56, 60, 64}, 21},
-
-	/* France. Change to ETSI. */
-	{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40,
-		44, 48, 52, 56, 60, 64}, 21},
-
-	/* MKK */
-	{{14, 36, 40, 44, 48, 52, 56, 60, 64}, 9},
-
-	/* MKK1 */
-	{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 36,
-		40, 44, 48, 52, 56, 60, 64}, 22},
-
-	/* Israel. */
-	{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40,
-		44, 48, 52, 56, 60, 64}, 21},
-
-	/* For 11a , TELEC */
-	{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 34, 38, 42, 46}, 17},
-
-	/* For Global Domain. 1-11 active, 12-14 passive. */
-	{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14}, 14},
-
-	/* world wide 13: ch1~ch11 active, ch12~13 passive */
-	{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13}, 13}
-};
-
-static void rtl8180_set_channel_map(u8 channel_plan,
-				    struct ieee80211_device *ieee)
-{
-	int i;
-
-	ieee->MinPassiveChnlNum = MAX_CHANNEL_NUMBER+1;
-	ieee->IbssStartChnl = 0;
-
-	switch (channel_plan) {
-	case COUNTRY_CODE_FCC:
-	case COUNTRY_CODE_IC:
-	case COUNTRY_CODE_ETSI:
-	case COUNTRY_CODE_SPAIN:
-	case COUNTRY_CODE_FRANCE:
-	case COUNTRY_CODE_MKK:
-	case COUNTRY_CODE_MKK1:
-	case COUNTRY_CODE_ISRAEL:
-	case COUNTRY_CODE_TELEC:
-		{
-			Dot11d_Init(ieee);
-			ieee->bGlobalDomain = false;
-			if (channel_plan_list[channel_plan].len != 0) {
-				/* Clear old channel map */
-				memset(GET_DOT11D_INFO(ieee)->channel_map, 0, sizeof(GET_DOT11D_INFO(ieee)->channel_map));
-				/* Set new channel map */
-				for (i = 0; i < channel_plan_list[channel_plan].len; i++) {
-					if (channel_plan_list[channel_plan].channel[i] <= 14)
-						GET_DOT11D_INFO(ieee)->channel_map[channel_plan_list[channel_plan].channel[i]] = 1;
-				}
-			}
-			break;
-		}
-	case COUNTRY_CODE_GLOBAL_DOMAIN:
-		{
-			GET_DOT11D_INFO(ieee)->bEnabled = false;
-			Dot11d_Reset(ieee);
-			ieee->bGlobalDomain = true;
-			break;
-		}
-	case COUNTRY_CODE_WORLD_WIDE_13_INDEX:
-		{
-			ieee->MinPassiveChnlNum = 12;
-			ieee->IbssStartChnl = 10;
-			break;
-		}
-	default:
-		{
-			Dot11d_Init(ieee);
-			ieee->bGlobalDomain = false;
-			memset(GET_DOT11D_INFO(ieee)->channel_map, 0, sizeof(GET_DOT11D_INFO(ieee)->channel_map));
-			for (i = 1; i <= 14; i++)
-				GET_DOT11D_INFO(ieee)->channel_map[i] = 1;
-			break;
-		}
-	}
-}
-
-void GPIOChangeRFWorkItemCallBack(struct work_struct *work);
-
-static void rtl8180_statistics_init(struct stats *pstats)
-{
-	memset(pstats, 0, sizeof(struct stats));
-}
-
-static void rtl8180_link_detect_init(struct link_detect_t *plink_detect)
-{
-	memset(plink_detect, 0, sizeof(struct link_detect_t));
-	plink_detect->slot_num = DEFAULT_SLOT_NUM;
-}
-
-static void rtl8187se_eeprom_register_read(struct eeprom_93cx6 *eeprom)
-{
-	struct net_device *dev = eeprom->data;
-	u8 reg = read_nic_byte(dev, EPROM_CMD);
-
-	eeprom->reg_data_in = reg & RTL818X_EEPROM_CMD_WRITE;
-	eeprom->reg_data_out = reg & RTL818X_EEPROM_CMD_READ;
-	eeprom->reg_data_clock = reg & RTL818X_EEPROM_CMD_CK;
-	eeprom->reg_chip_select = reg & RTL818X_EEPROM_CMD_CS;
-}
-
-static void rtl8187se_eeprom_register_write(struct eeprom_93cx6 *eeprom)
-{
-	struct net_device *dev = eeprom->data;
-	u8 reg = 2 << 6;
-
-	if (eeprom->reg_data_in)
-		reg |= RTL818X_EEPROM_CMD_WRITE;
-	if (eeprom->reg_data_out)
-		reg |= RTL818X_EEPROM_CMD_READ;
-	if (eeprom->reg_data_clock)
-		reg |= RTL818X_EEPROM_CMD_CK;
-	if (eeprom->reg_chip_select)
-		reg |= RTL818X_EEPROM_CMD_CS;
-
-	write_nic_byte(dev, EPROM_CMD, reg);
-	read_nic_byte(dev, EPROM_CMD);
-	udelay(10);
-}
-
-static short rtl8180_init(struct net_device *dev)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	u16 word;
-	u16 usValue;
-	u16 tmpu16;
-	int i, j;
-	struct eeprom_93cx6 eeprom;
-	u16 eeprom_val;
-
-	eeprom.data = dev;
-	eeprom.register_read = rtl8187se_eeprom_register_read;
-	eeprom.register_write = rtl8187se_eeprom_register_write;
-	eeprom.width = PCI_EEPROM_WIDTH_93C46;
-
-	eeprom_93cx6_read(&eeprom, EEPROM_COUNTRY_CODE>>1, &eeprom_val);
-	priv->channel_plan = eeprom_val & 0xFF;
-	if (priv->channel_plan > COUNTRY_CODE_GLOBAL_DOMAIN) {
-		netdev_err(dev, "rtl8180_init: Invalid channel plan! Set to default.\n");
-		priv->channel_plan = 0;
-	}
-
-	DMESG("Channel plan is %d\n", priv->channel_plan);
-	rtl8180_set_channel_map(priv->channel_plan, priv->ieee80211);
-
-	/* FIXME: these constants are placed in a bad pleace. */
-	priv->txbuffsize = 2048;	/* 1024; */
-	priv->txringcount = 32;		/* 32; */
-	priv->rxbuffersize = 2048;	/* 1024; */
-	priv->rxringcount = 64;		/* 32; */
-	priv->txbeaconcount = 2;
-	priv->rx_skb_complete = 1;
-
-	priv->RFChangeInProgress = false;
-	priv->SetRFPowerStateInProgress = false;
-	priv->RFProgType = 0;
-
-	priv->irq_enabled = 0;
-
-	rtl8180_statistics_init(&priv->stats);
-	rtl8180_link_detect_init(&priv->link_detect);
-
-	priv->ack_tx_to_ieee = 0;
-	priv->ieee80211->current_network.beacon_interval =
-		DEFAULT_BEACONINTERVAL;
-	priv->ieee80211->iw_mode = IW_MODE_INFRA;
-	priv->ieee80211->softmac_features  = IEEE_SOFTMAC_SCAN |
-		IEEE_SOFTMAC_ASSOCIATE | IEEE_SOFTMAC_PROBERQ |
-		IEEE_SOFTMAC_PROBERS | IEEE_SOFTMAC_TX_QUEUE;
-	priv->ieee80211->active_scan = 1;
-	priv->ieee80211->rate = 110; /* 11 mbps */
-	priv->ieee80211->modulation = IEEE80211_CCK_MODULATION;
-	priv->ieee80211->host_encrypt = 1;
-	priv->ieee80211->host_decrypt = 1;
-	priv->ieee80211->sta_wake_up = rtl8180_hw_wakeup;
-	priv->ieee80211->ps_request_tx_ack = rtl8180_rq_tx_ack;
-	priv->ieee80211->enter_sleep_state = rtl8180_hw_sleep;
-	priv->ieee80211->ps_is_queue_empty = rtl8180_is_tx_queue_empty;
-
-	priv->hw_wep = hwwep;
-	priv->dev = dev;
-	priv->retry_rts = DEFAULT_RETRY_RTS;
-	priv->retry_data = DEFAULT_RETRY_DATA;
-	priv->RFChangeInProgress = false;
-	priv->SetRFPowerStateInProgress = false;
-	priv->RFProgType = 0;
-	priv->bInactivePs = true; /* false; */
-	priv->ieee80211->bInactivePs = priv->bInactivePs;
-	priv->bSwRfProcessing = false;
-	priv->eRFPowerState = RF_OFF;
-	priv->RfOffReason = 0;
-	priv->led_strategy = SW_LED_MODE0;
-	priv->TxPollingTimes = 0;
-	priv->bLeisurePs = true;
-	priv->dot11PowerSaveMode = ACTIVE;
-	priv->AdMinCheckPeriod = 5;
-	priv->AdMaxCheckPeriod = 10;
-	priv->AdMaxRxSsThreshold = 30;	/* 60->30 */
-	priv->AdRxSsThreshold = 20;	/* 50->20 */
-	priv->AdCheckPeriod = priv->AdMinCheckPeriod;
-	priv->AdTickCount = 0;
-	priv->AdRxSignalStrength = -1;
-	priv->RegSwAntennaDiversityMechanism = 0;
-	priv->RegDefaultAntenna = 0;
-	priv->SignalStrength = 0;
-	priv->AdRxOkCnt = 0;
-	priv->CurrAntennaIndex = 0;
-	priv->AdRxSsBeforeSwitched = 0;
-	init_timer(&priv->SwAntennaDiversityTimer);
-	priv->SwAntennaDiversityTimer.data = (unsigned long)dev;
-	priv->SwAntennaDiversityTimer.function =
-		(void *)SwAntennaDiversityTimerCallback;
-	priv->bDigMechanism = true;
-	priv->InitialGain = 6;
-	priv->bXtalCalibration = false;
-	priv->XtalCal_Xin = 0;
-	priv->XtalCal_Xout = 0;
-	priv->bTxPowerTrack = false;
-	priv->ThermalMeter = 0;
-	priv->FalseAlarmRegValue = 0;
-	priv->RegDigOfdmFaUpTh = 0xc; /* Upper threshold of OFDM false alarm,
-					which is used in DIG. */
-	priv->DIG_NumberFallbackVote = 0;
-	priv->DIG_NumberUpgradeVote = 0;
-	priv->LastSignalStrengthInPercent = 0;
-	priv->Stats_SignalStrength = 0;
-	priv->LastRxPktAntenna = 0;
-	priv->SignalQuality = 0; /* in 0-100 index. */
-	priv->Stats_SignalQuality = 0;
-	priv->RecvSignalPower = 0; /* in dBm. */
-	priv->Stats_RecvSignalPower = 0;
-	priv->AdMainAntennaRxOkCnt = 0;
-	priv->AdAuxAntennaRxOkCnt = 0;
-	priv->bHWAdSwitched = false;
-	priv->bRegHighPowerMechanism = true;
-	priv->RegHiPwrUpperTh = 77;
-	priv->RegHiPwrLowerTh = 75;
-	priv->RegRSSIHiPwrUpperTh = 70;
-	priv->RegRSSIHiPwrLowerTh = 20;
-	priv->bCurCCKPkt = false;
-	priv->UndecoratedSmoothedSS = -1;
-	priv->bToUpdateTxPwr = false;
-	priv->CurCCKRSSI = 0;
-	priv->RxPower = 0;
-	priv->RSSI = 0;
-	priv->NumTxOkTotal = 0;
-	priv->NumTxUnicast = 0;
-	priv->keepAliveLevel = DEFAULT_KEEP_ALIVE_LEVEL;
-	priv->CurrRetryCnt = 0;
-	priv->LastRetryCnt = 0;
-	priv->LastTxokCnt = 0;
-	priv->LastRxokCnt = 0;
-	priv->LastRetryRate = 0;
-	priv->bTryuping = 0;
-	priv->CurrTxRate = 0;
-	priv->CurrRetryRate = 0;
-	priv->TryupingCount = 0;
-	priv->TryupingCountNoData = 0;
-	priv->TryDownCountLowData = 0;
-	priv->LastTxOKBytes = 0;
-	priv->LastFailTxRate = 0;
-	priv->LastFailTxRateSS = 0;
-	priv->FailTxRateCount = 0;
-	priv->LastTxThroughput = 0;
-	priv->NumTxOkBytesTotal = 0;
-	priv->ForcedDataRate = 0;
-	priv->RegBModeGainStage = 1;
-
-	priv->promisc = (dev->flags & IFF_PROMISC) ? 1 : 0;
-	spin_lock_init(&priv->irq_th_lock);
-	spin_lock_init(&priv->tx_lock);
-	spin_lock_init(&priv->ps_lock);
-	spin_lock_init(&priv->rf_ps_lock);
-	sema_init(&priv->wx_sem, 1);
-	INIT_WORK(&priv->reset_wq, (void *)rtl8180_restart_wq);
-	INIT_DELAYED_WORK(&priv->ieee80211->hw_wakeup_wq,
-			  (void *)rtl8180_hw_wakeup_wq);
-	INIT_DELAYED_WORK(&priv->ieee80211->hw_sleep_wq,
-			  (void *)rtl8180_hw_sleep_wq);
-	INIT_WORK(&priv->ieee80211->wmm_param_update_wq,
-		  (void *)rtl8180_wmm_param_update);
-	INIT_DELAYED_WORK(&priv->ieee80211->rate_adapter_wq,
-			  (void *)rtl8180_rate_adapter);
-	INIT_DELAYED_WORK(&priv->ieee80211->hw_dig_wq,
-			 (void *)rtl8180_hw_dig_wq);
-	INIT_DELAYED_WORK(&priv->ieee80211->tx_pw_wq,
-			 (void *)rtl8180_tx_pw_wq);
-	INIT_DELAYED_WORK(&priv->ieee80211->GPIOChangeRFWorkItem,
-			 (void *) GPIOChangeRFWorkItemCallBack);
-	tasklet_init(&priv->irq_rx_tasklet,
-		     (void(*)(unsigned long)) rtl8180_irq_rx_tasklet,
-		     (unsigned long)priv);
-
-	init_timer(&priv->watch_dog_timer);
-	priv->watch_dog_timer.data = (unsigned long)dev;
-	priv->watch_dog_timer.function = watch_dog_adaptive;
-
-	init_timer(&priv->rateadapter_timer);
-	priv->rateadapter_timer.data = (unsigned long)dev;
-	priv->rateadapter_timer.function = timer_rate_adaptive;
-	priv->RateAdaptivePeriod = RATE_ADAPTIVE_TIMER_PERIOD;
-	priv->bEnhanceTxPwr = false;
-
-	priv->ieee80211->softmac_hard_start_xmit = rtl8180_hard_start_xmit;
-	priv->ieee80211->set_chan = rtl8180_set_chan;
-	priv->ieee80211->link_change = rtl8180_link_change;
-	priv->ieee80211->softmac_data_hard_start_xmit = rtl8180_hard_data_xmit;
-	priv->ieee80211->data_hard_stop = rtl8180_data_hard_stop;
-	priv->ieee80211->data_hard_resume = rtl8180_data_hard_resume;
-
-	priv->ieee80211->init_wmmparam_flag = 0;
-
-	priv->ieee80211->start_send_beacons = rtl8180_start_tx_beacon;
-	priv->ieee80211->stop_send_beacons = rtl8180_beacon_tx_disable;
-	priv->ieee80211->fts = DEFAULT_FRAG_THRESHOLD;
-
-	priv->ShortRetryLimit = 7;
-	priv->LongRetryLimit = 7;
-	priv->EarlyRxThreshold = 7;
-
-	priv->TransmitConfig =	(1<<TCR_DurProcMode_OFFSET) |
-				(7<<TCR_MXDMA_OFFSET) |
-				(priv->ShortRetryLimit<<TCR_SRL_OFFSET) |
-				(priv->LongRetryLimit<<TCR_LRL_OFFSET);
-
-	priv->ReceiveConfig =	RCR_AMF | RCR_ADF | RCR_ACF |
-				RCR_AB | RCR_AM | RCR_APM |
-				(7<<RCR_MXDMA_OFFSET) |
-				(priv->EarlyRxThreshold<<RCR_FIFO_OFFSET) |
-				(priv->EarlyRxThreshold == 7 ?
-					 RCR_ONLYERLPKT : 0);
-
-	priv->IntrMask		= IMR_TMGDOK | IMR_TBDER |
-				  IMR_THPDER | IMR_THPDOK |
-				  IMR_TVODER | IMR_TVODOK |
-				  IMR_TVIDER | IMR_TVIDOK |
-				  IMR_TBEDER | IMR_TBEDOK |
-				  IMR_TBKDER | IMR_TBKDOK |
-				  IMR_RDU |
-				  IMR_RER | IMR_ROK |
-				  IMR_RQoSOK;
-
-	priv->InitialGain = 6;
-
-	DMESG("MAC controller is a RTL8187SE b/g");
-
-	priv->ieee80211->modulation |= IEEE80211_OFDM_MODULATION;
-	priv->ieee80211->short_slot = 1;
-
-	eeprom_93cx6_read(&eeprom, EEPROM_SW_REVD_OFFSET, &usValue);
-	DMESG("usValue is %#hx\n", usValue);
-	/* 3Read AntennaDiversity */
-
-	/* SW Antenna Diversity. */
-	priv->EEPROMSwAntennaDiversity = (usValue & EEPROM_SW_AD_MASK) ==
-		EEPROM_SW_AD_ENABLE;
-
-	/* Default Antenna to use. */
-	priv->EEPROMDefaultAntenna1 = (usValue & EEPROM_DEF_ANT_MASK) ==
-		EEPROM_DEF_ANT_1;
-
-	if (priv->RegSwAntennaDiversityMechanism == 0) /* Auto */
-		/* 0: default from EEPROM. */
-		priv->bSwAntennaDiverity = priv->EEPROMSwAntennaDiversity;
-	else
-		/* 1:disable antenna diversity, 2: enable antenna diversity. */
-		priv->bSwAntennaDiverity =
-			priv->RegSwAntennaDiversityMechanism == 2;
-
-	if (priv->RegDefaultAntenna == 0)
-		/* 0: default from EEPROM. */
-		priv->bDefaultAntenna1 = priv->EEPROMDefaultAntenna1;
-	else
-		/* 1: main, 2: aux. */
-		priv->bDefaultAntenna1 = priv->RegDefaultAntenna == 2;
-
-	priv->plcp_preamble_mode = 2;
-	/* the eeprom type is stored in RCR register bit #6 */
-	if (RCR_9356SEL & read_nic_dword(dev, RCR))
-		priv->epromtype = EPROM_93c56;
-	else
-		priv->epromtype = EPROM_93c46;
-
-	eeprom_93cx6_multiread(&eeprom, 0x7, (__le16 *)
-			       dev->dev_addr, 3);
-
-	for (i = 1, j = 0; i < 14; i += 2, j++) {
-		eeprom_93cx6_read(&eeprom, EPROM_TXPW_CH1_2 + j, &word);
-		priv->chtxpwr[i] = word & 0xff;
-		priv->chtxpwr[i+1] = (word & 0xff00)>>8;
-	}
-	for (i = 1, j = 0; i < 14; i += 2, j++) {
-		eeprom_93cx6_read(&eeprom, EPROM_TXPW_OFDM_CH1_2 + j, &word);
-		priv->chtxpwr_ofdm[i] = word & 0xff;
-		priv->chtxpwr_ofdm[i+1] = (word & 0xff00) >> 8;
-	}
-
-	/* 3Read crystal calibration and thermal meter indication on 87SE. */
-	eeprom_93cx6_read(&eeprom, EEPROM_RSV>>1, &tmpu16);
-
-	/* Crystal calibration for Xin and Xout resp. */
-	priv->XtalCal_Xout = tmpu16 & EEPROM_XTAL_CAL_XOUT_MASK;
-	priv->XtalCal_Xin = (tmpu16 & EEPROM_XTAL_CAL_XIN_MASK) >> 4;
-	if ((tmpu16 & EEPROM_XTAL_CAL_ENABLE) >> 12)
-		priv->bXtalCalibration = true;
-
-	/* Thermal meter reference indication. */
-	priv->ThermalMeter =  (u8)((tmpu16 & EEPROM_THERMAL_METER_MASK) >> 8);
-	if ((tmpu16 & EEPROM_THERMAL_METER_ENABLE) >> 13)
-		priv->bTxPowerTrack = true;
-
-	priv->rf_sleep = rtl8225z4_rf_sleep;
-	priv->rf_wakeup = rtl8225z4_rf_wakeup;
-	DMESGW("**PLEASE** REPORT SUCCESSFUL/UNSUCCESSFUL TO Realtek!");
-
-	priv->rf_close = rtl8225z2_rf_close;
-	priv->rf_init = rtl8225z2_rf_init;
-	priv->rf_set_chan = rtl8225z2_rf_set_chan;
-	priv->rf_set_sens = NULL;
-
-	if (0 != alloc_rx_desc_ring(dev, priv->rxbuffersize, priv->rxringcount))
-		return -ENOMEM;
-
-	if (0 != alloc_tx_desc_ring(dev, priv->txbuffsize, priv->txringcount,
-				  TX_MANAGEPRIORITY_RING_ADDR))
-		return -ENOMEM;
-
-	if (0 != alloc_tx_desc_ring(dev, priv->txbuffsize, priv->txringcount,
-				 TX_BKPRIORITY_RING_ADDR))
-		return -ENOMEM;
-
-	if (0 != alloc_tx_desc_ring(dev, priv->txbuffsize, priv->txringcount,
-				 TX_BEPRIORITY_RING_ADDR))
-		return -ENOMEM;
-
-	if (0 != alloc_tx_desc_ring(dev, priv->txbuffsize, priv->txringcount,
-				  TX_VIPRIORITY_RING_ADDR))
-		return -ENOMEM;
-
-	if (0 != alloc_tx_desc_ring(dev, priv->txbuffsize, priv->txringcount,
-				  TX_VOPRIORITY_RING_ADDR))
-		return -ENOMEM;
-
-	if (0 != alloc_tx_desc_ring(dev, priv->txbuffsize, priv->txringcount,
-				  TX_HIGHPRIORITY_RING_ADDR))
-		return -ENOMEM;
-
-	if (0 != alloc_tx_desc_ring(dev, priv->txbuffsize, priv->txbeaconcount,
-				  TX_BEACON_RING_ADDR))
-		return -ENOMEM;
-
-	if (request_irq(dev->irq, rtl8180_interrupt,
-		IRQF_SHARED, dev->name, dev)) {
-		DMESGE("Error allocating IRQ %d", dev->irq);
-		return -1;
-	} else {
-		priv->irq = dev->irq;
-		DMESG("IRQ %d", dev->irq);
-	}
-
-	return 0;
-}
-
-void rtl8180_no_hw_wep(struct net_device *dev)
-{
-}
-
-void rtl8180_set_hw_wep(struct net_device *dev)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	u8 pgreg;
-	u8 security;
-	u32 key0_word4;
-
-	pgreg = read_nic_byte(dev, PGSELECT);
-	write_nic_byte(dev, PGSELECT, pgreg & ~(1<<PGSELECT_PG_SHIFT));
-
-	key0_word4 = read_nic_dword(dev, KEY0+4+4+4);
-	key0_word4 &= ~0xff;
-	key0_word4 |= priv->key0[3] & 0xff;
-	write_nic_dword(dev, KEY0, (priv->key0[0]));
-	write_nic_dword(dev, KEY0+4, (priv->key0[1]));
-	write_nic_dword(dev, KEY0+4+4, (priv->key0[2]));
-	write_nic_dword(dev, KEY0+4+4+4, (key0_word4));
-
-	security  = read_nic_byte(dev, SECURITY);
-	security |= (1<<SECURITY_WEP_TX_ENABLE_SHIFT);
-	security |= (1<<SECURITY_WEP_RX_ENABLE_SHIFT);
-	security &= ~SECURITY_ENCRYP_MASK;
-	security |= (SECURITY_ENCRYP_104<<SECURITY_ENCRYP_SHIFT);
-
-	write_nic_byte(dev, SECURITY, security);
-
-	DMESG("key %x %x %x %x", read_nic_dword(dev, KEY0+4+4+4),
-	      read_nic_dword(dev, KEY0+4+4), read_nic_dword(dev, KEY0+4),
-	      read_nic_dword(dev, KEY0));
-}
-
-
-void rtl8185_rf_pins_enable(struct net_device *dev)
-{
-	write_nic_word(dev, RFPinsEnable, 0x1fff); /* | tmp); */
-}
-
-void rtl8185_set_anaparam2(struct net_device *dev, u32 a)
-{
-	u8 conf3;
-
-	rtl8180_set_mode(dev, EPROM_CMD_CONFIG);
-
-	conf3 = read_nic_byte(dev, CONFIG3);
-	write_nic_byte(dev, CONFIG3, conf3 | (1<<CONFIG3_ANAPARAM_W_SHIFT));
-	write_nic_dword(dev, ANAPARAM2, a);
-
-	conf3 = read_nic_byte(dev, CONFIG3);
-	write_nic_byte(dev, CONFIG3, conf3 & ~(1<<CONFIG3_ANAPARAM_W_SHIFT));
-	rtl8180_set_mode(dev, EPROM_CMD_NORMAL);
-}
-
-void rtl8180_set_anaparam(struct net_device *dev, u32 a)
-{
-	u8 conf3;
-
-	rtl8180_set_mode(dev, EPROM_CMD_CONFIG);
-
-	conf3 = read_nic_byte(dev, CONFIG3);
-	write_nic_byte(dev, CONFIG3, conf3 | (1<<CONFIG3_ANAPARAM_W_SHIFT));
-	write_nic_dword(dev, ANAPARAM, a);
-
-	conf3 = read_nic_byte(dev, CONFIG3);
-	write_nic_byte(dev, CONFIG3, conf3 & ~(1<<CONFIG3_ANAPARAM_W_SHIFT));
-	rtl8180_set_mode(dev, EPROM_CMD_NORMAL);
-}
-
-void rtl8185_tx_antenna(struct net_device *dev, u8 ant)
-{
-	write_nic_byte(dev, TX_ANTENNA, ant);
-	force_pci_posting(dev);
-	mdelay(1);
-}
-
-static void rtl8185_write_phy(struct net_device *dev, u8 adr, u32 data)
-{
-	u32 phyw;
-
-	adr |= 0x80;
-
-	phyw = ((data<<8) | adr);
-
-	/* Note: we must write 0xff7c after 0x7d-0x7f to write BB register. */
-	write_nic_byte(dev, 0x7f, ((phyw & 0xff000000) >> 24));
-	write_nic_byte(dev, 0x7e, ((phyw & 0x00ff0000) >> 16));
-	write_nic_byte(dev, 0x7d, ((phyw & 0x0000ff00) >> 8));
-	write_nic_byte(dev, 0x7c, ((phyw & 0x000000ff)));
-}
-
-inline void write_phy_ofdm(struct net_device *dev, u8 adr, u32 data)
-{
-	data = data & 0xff;
-	rtl8185_write_phy(dev, adr, data);
-}
-
-void write_phy_cck(struct net_device *dev, u8 adr, u32 data)
-{
-	data = data & 0xff;
-	rtl8185_write_phy(dev, adr, data | 0x10000);
-}
-
-/*
- * This configures registers for beacon tx and enables it via
- * rtl8180_beacon_tx_enable(). rtl8180_beacon_tx_disable() might
- * be used to stop beacon transmission
- */
-void rtl8180_start_tx_beacon(struct net_device *dev)
-{
-	u16 word;
-
-	DMESG("Enabling beacon TX");
-	rtl8180_prepare_beacon(dev);
-	rtl8180_irq_disable(dev);
-	rtl8180_beacon_tx_enable(dev);
-
-	word = read_nic_word(dev, AtimWnd) & ~AtimWnd_AtimWnd;
-	write_nic_word(dev, AtimWnd, word); /* word |= */
-
-	word  = read_nic_word(dev, BintrItv);
-	word &= ~BintrItv_BintrItv;
-	word |= 1000; /* priv->ieee80211->current_network.beacon_interval *
-		       * ((priv->txbeaconcount > 1)?(priv->txbeaconcount-1):1);
-		       * FIXME: check if correct ^^ worked with 0x3e8;
-		       */
-	write_nic_word(dev, BintrItv, word);
-
-	rtl8180_set_mode(dev, EPROM_CMD_NORMAL);
-
-	rtl8185b_irq_enable(dev);
-}
-
-static struct net_device_stats *rtl8180_stats(struct net_device *dev)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	return &priv->ieee80211->stats;
-}
-
-/*
- * Change current and default preamble mode.
- */
-static bool MgntActSet_802_11_PowerSaveMode(struct r8180_priv *priv,
-				     enum rt_ps_mode rtPsMode)
-{
-	/* Currently, we do not change power save mode on IBSS mode. */
-	if (priv->ieee80211->iw_mode == IW_MODE_ADHOC)
-		return false;
-
-	priv->ieee80211->ps = rtPsMode;
-
-	return true;
-}
-
-static void LeisurePSEnter(struct r8180_priv *priv)
-{
-	if (priv->bLeisurePs)
-		if (priv->ieee80211->ps == IEEE80211_PS_DISABLED)
-			/* IEEE80211_PS_ENABLE */
-			MgntActSet_802_11_PowerSaveMode(priv,
-				IEEE80211_PS_MBCAST | IEEE80211_PS_UNICAST);
-}
-
-static void LeisurePSLeave(struct r8180_priv *priv)
-{
-	if (priv->bLeisurePs)
-		if (priv->ieee80211->ps != IEEE80211_PS_DISABLED)
-			MgntActSet_802_11_PowerSaveMode(
-				priv, IEEE80211_PS_DISABLED);
-}
-
-void rtl8180_hw_wakeup_wq(struct work_struct *work)
-{
-	struct delayed_work *dwork = to_delayed_work(work);
-	struct ieee80211_device *ieee = container_of(
-		dwork, struct ieee80211_device, hw_wakeup_wq);
-	struct net_device *dev = ieee->dev;
-
-	rtl8180_hw_wakeup(dev);
-}
-
-void rtl8180_hw_sleep_wq(struct work_struct *work)
-{
-	struct delayed_work *dwork = to_delayed_work(work);
-	struct ieee80211_device *ieee = container_of(
-		dwork, struct ieee80211_device, hw_sleep_wq);
-	struct net_device *dev = ieee->dev;
-
-	rtl8180_hw_sleep_down(dev);
-}
-
-static void MgntLinkKeepAlive(struct r8180_priv *priv)
-{
-	if (priv->keepAliveLevel == 0)
-		return;
-
-	if (priv->ieee80211->state == IEEE80211_LINKED) {
-		/*
-		 * Keep-Alive.
-		 */
-
-		if ((priv->keepAliveLevel == 2) ||
-			(priv->link_detect.last_num_tx_unicast ==
-				priv->NumTxUnicast &&
-			priv->link_detect.last_num_rx_unicast ==
-				priv->ieee80211->NumRxUnicast)
-			) {
-			priv->link_detect.idle_count++;
-
-			/*
-			 * Send a Keep-Alive packet packet to AP if we had
-			 * been idle for a while.
-			 */
-			if (priv->link_detect.idle_count >=
-				KEEP_ALIVE_INTERVAL /
-				CHECK_FOR_HANG_PERIOD - 1) {
-				priv->link_detect.idle_count = 0;
-				ieee80211_sta_ps_send_null_frame(
-					priv->ieee80211, false);
-			}
-		} else {
-			priv->link_detect.idle_count = 0;
-		}
-		priv->link_detect.last_num_tx_unicast = priv->NumTxUnicast;
-		priv->link_detect.last_num_rx_unicast =
-			priv->ieee80211->NumRxUnicast;
-	}
-}
-
-void rtl8180_watch_dog(struct net_device *dev)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	bool bEnterPS = false;
-	bool bBusyTraffic = false;
-	u32 TotalRxNum = 0;
-	u16 SlotIndex = 0;
-	u16 i = 0;
-	if (priv->ieee80211->actscanning == false) {
-		if ((priv->ieee80211->iw_mode != IW_MODE_ADHOC) &&
-		    (priv->ieee80211->state == IEEE80211_NOLINK) &&
-		    (priv->ieee80211->beinretry == false) &&
-		    (priv->eRFPowerState == RF_ON))
-			IPSEnter(dev);
-	}
-	if ((priv->ieee80211->state == IEEE80211_LINKED) &&
-		(priv->ieee80211->iw_mode == IW_MODE_INFRA)) {
-		SlotIndex = (priv->link_detect.slot_index++) %
-			priv->link_detect.slot_num;
-
-		priv->link_detect.rx_frame_num[SlotIndex] =
-			priv->ieee80211->NumRxDataInPeriod +
-			priv->ieee80211->NumRxBcnInPeriod;
-
-		for (i = 0; i < priv->link_detect.slot_num; i++)
-			TotalRxNum += priv->link_detect.rx_frame_num[i];
-
-		if (TotalRxNum == 0) {
-			priv->ieee80211->state = IEEE80211_ASSOCIATING;
-			queue_work(priv->ieee80211->wq,
-				&priv->ieee80211->associate_procedure_wq);
-		}
-	}
-
-	MgntLinkKeepAlive(priv);
-
-	LeisurePSLeave(priv);
-
-	if (priv->ieee80211->state == IEEE80211_LINKED) {
-		priv->link_detect.num_rx_ok_in_period =
-			priv->ieee80211->NumRxDataInPeriod;
-		if (priv->link_detect.num_rx_ok_in_period > 666 ||
-			priv->link_detect.num_tx_ok_in_period > 666) {
-			bBusyTraffic = true;
-		}
-		if ((priv->link_detect.num_rx_ok_in_period +
-			priv->link_detect.num_tx_ok_in_period > 8)
-			|| (priv->link_detect.num_rx_ok_in_period > 2)) {
-			bEnterPS = false;
-		} else
-			bEnterPS = true;
-
-		if (bEnterPS)
-			LeisurePSEnter(priv);
-		else
-			LeisurePSLeave(priv);
-	} else
-		LeisurePSLeave(priv);
-	priv->link_detect.b_busy_traffic = bBusyTraffic;
-	priv->link_detect.num_rx_ok_in_period = 0;
-	priv->link_detect.num_tx_ok_in_period = 0;
-	priv->ieee80211->NumRxDataInPeriod = 0;
-	priv->ieee80211->NumRxBcnInPeriod = 0;
-}
-
-static int _rtl8180_up(struct net_device *dev)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	priv->up = 1;
-
-	DMESG("Bringing up iface");
-	rtl8185b_adapter_start(dev);
-	rtl8185b_rx_enable(dev);
-	rtl8185b_tx_enable(dev);
-	if (priv->bInactivePs) {
-		if (priv->ieee80211->iw_mode == IW_MODE_ADHOC)
-			IPSLeave(dev);
-	}
-	timer_rate_adaptive((unsigned long)dev);
-	watch_dog_adaptive((unsigned long)dev);
-	if (priv->bSwAntennaDiverity)
-			SwAntennaDiversityTimerCallback(dev);
-	ieee80211_softmac_start_protocol(priv->ieee80211);
-	return 0;
-}
-
-static int rtl8180_open(struct net_device *dev)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	int ret;
-
-	down(&priv->wx_sem);
-	ret = rtl8180_up(dev);
-	up(&priv->wx_sem);
-	return ret;
-}
-
-int rtl8180_up(struct net_device *dev)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	if (priv->up == 1)
-		return -1;
-
-	return _rtl8180_up(dev);
-}
-
-static int rtl8180_close(struct net_device *dev)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	int ret;
-
-	down(&priv->wx_sem);
-	ret = rtl8180_down(dev);
-	up(&priv->wx_sem);
-
-	return ret;
-}
-
-int rtl8180_down(struct net_device *dev)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	if (priv->up == 0)
-		return -1;
-
-	priv->up = 0;
-
-	ieee80211_softmac_stop_protocol(priv->ieee80211);
-	/* FIXME */
-	if (!netif_queue_stopped(dev))
-		netif_stop_queue(dev);
-	rtl8180_rtx_disable(dev);
-	rtl8180_irq_disable(dev);
-	del_timer_sync(&priv->watch_dog_timer);
-	del_timer_sync(&priv->rateadapter_timer);
-	cancel_delayed_work(&priv->ieee80211->rate_adapter_wq);
-	cancel_delayed_work(&priv->ieee80211->hw_wakeup_wq);
-	cancel_delayed_work(&priv->ieee80211->hw_sleep_wq);
-	cancel_delayed_work(&priv->ieee80211->hw_dig_wq);
-	cancel_delayed_work(&priv->ieee80211->tx_pw_wq);
-	del_timer_sync(&priv->SwAntennaDiversityTimer);
-	SetZebraRFPowerState8185(dev, RF_OFF);
-	memset(&priv->ieee80211->current_network,
-		0, sizeof(struct ieee80211_network));
-	priv->ieee80211->state = IEEE80211_NOLINK;
-	return 0;
-}
-
-void rtl8180_restart_wq(struct work_struct *work)
-{
-	struct r8180_priv *priv = container_of(
-		work, struct r8180_priv, reset_wq);
-	struct net_device *dev = priv->dev;
-
-	down(&priv->wx_sem);
-
-	rtl8180_commit(dev);
-
-	up(&priv->wx_sem);
-}
-
-static void rtl8180_restart(struct net_device *dev)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	schedule_work(&priv->reset_wq);
-}
-
-void rtl8180_commit(struct net_device *dev)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	if (priv->up == 0)
-		return;
-
-	del_timer_sync(&priv->watch_dog_timer);
-	del_timer_sync(&priv->rateadapter_timer);
-	cancel_delayed_work(&priv->ieee80211->rate_adapter_wq);
-	cancel_delayed_work(&priv->ieee80211->hw_wakeup_wq);
-	cancel_delayed_work(&priv->ieee80211->hw_sleep_wq);
-	cancel_delayed_work(&priv->ieee80211->hw_dig_wq);
-	cancel_delayed_work(&priv->ieee80211->tx_pw_wq);
-	del_timer_sync(&priv->SwAntennaDiversityTimer);
-	ieee80211_softmac_stop_protocol(priv->ieee80211);
-	rtl8180_irq_disable(dev);
-	rtl8180_rtx_disable(dev);
-	_rtl8180_up(dev);
-}
-
-static void r8180_set_multicast(struct net_device *dev)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	short promisc;
-
-	promisc = (dev->flags & IFF_PROMISC) ? 1 : 0;
-
-	if (promisc != priv->promisc)
-		rtl8180_restart(dev);
-
-	priv->promisc = promisc;
-}
-
-static int r8180_set_mac_adr(struct net_device *dev, void *mac)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	struct sockaddr *addr = mac;
-
-	down(&priv->wx_sem);
-
-	memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
-
-	if (priv->ieee80211->iw_mode == IW_MODE_MASTER)
-		memcpy(priv->ieee80211->current_network.bssid,
-			dev->dev_addr, ETH_ALEN);
-
-	if (priv->up) {
-		rtl8180_down(dev);
-		rtl8180_up(dev);
-	}
-
-	up(&priv->wx_sem);
-
-	return 0;
-}
-
-/* based on ipw2200 driver */
-static int rtl8180_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	struct iwreq *wrq = (struct iwreq *) rq;
-	int ret = -1;
-
-	switch (cmd) {
-	case RTL_IOCTL_WPA_SUPPLICANT:
-		ret = ieee80211_wpa_supplicant_ioctl(
-			priv->ieee80211, &wrq->u.data);
-		return ret;
-	default:
-		return -EOPNOTSUPP;
-	}
-
-	return -EOPNOTSUPP;
-}
-
-static const struct net_device_ops rtl8180_netdev_ops = {
-	.ndo_open		= rtl8180_open,
-	.ndo_stop		= rtl8180_close,
-	.ndo_get_stats		= rtl8180_stats,
-	.ndo_tx_timeout		= rtl8180_restart,
-	.ndo_do_ioctl		= rtl8180_ioctl,
-	.ndo_set_rx_mode	= r8180_set_multicast,
-	.ndo_set_mac_address	= r8180_set_mac_adr,
-	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_change_mtu		= eth_change_mtu,
-	.ndo_start_xmit		= ieee80211_rtl_xmit,
-};
-
-static int rtl8180_pci_probe(struct pci_dev *pdev,
-			     const struct pci_device_id *id)
-{
-	unsigned long ioaddr = 0;
-	struct net_device *dev = NULL;
-	struct r8180_priv *priv = NULL;
-	u8 unit = 0;
-	int ret = -ENODEV;
-
-	unsigned long pmem_start, pmem_len, pmem_flags;
-
-	DMESG("Configuring chip resources");
-
-	if (pci_enable_device(pdev)) {
-		DMESG("Failed to enable PCI device");
-		return -EIO;
-	}
-
-	pci_set_master(pdev);
-	pci_set_dma_mask(pdev, 0xffffff00ULL);
-	pci_set_consistent_dma_mask(pdev, 0xffffff00ULL);
-	dev = alloc_ieee80211(sizeof(struct r8180_priv));
-	if (!dev) {
-		ret = -ENOMEM;
-		goto fail_free;
-	}
-	priv = ieee80211_priv(dev);
-	priv->ieee80211 = netdev_priv(dev);
-
-	pci_set_drvdata(pdev, dev);
-	SET_NETDEV_DEV(dev, &pdev->dev);
-
-	priv = ieee80211_priv(dev);
-	priv->pdev = pdev;
-
-	pmem_start = pci_resource_start(pdev, 1);
-	pmem_len = pci_resource_len(pdev, 1);
-	pmem_flags = pci_resource_flags(pdev, 1);
-
-	if (!(pmem_flags & IORESOURCE_MEM)) {
-		DMESG("region #1 not a MMIO resource, aborting");
-		goto fail;
-	}
-
-	if (!request_mem_region(pmem_start, pmem_len, RTL8180_MODULE_NAME)) {
-		DMESG("request_mem_region failed!");
-		goto fail;
-	}
-
-	ioaddr = (unsigned long)ioremap_nocache(pmem_start, pmem_len);
-	if (ioaddr == (unsigned long)NULL) {
-		DMESG("ioremap failed!");
-		goto fail1;
-	}
-
-	dev->mem_start = ioaddr; /* shared mem start */
-	dev->mem_end = ioaddr + pci_resource_len(pdev, 0); /* shared mem end */
-
-	pci_read_config_byte(pdev, 0x05, &unit);
-	pci_write_config_byte(pdev, 0x05, unit & (~0x04));
-
-	dev->irq = pdev->irq;
-	priv->irq = 0;
-
-	dev->netdev_ops = &rtl8180_netdev_ops;
-	dev->wireless_handlers = &r8180_wx_handlers_def;
-
-	dev->type = ARPHRD_ETHER;
-	dev->watchdog_timeo = HZ*3;
-
-	if (dev_alloc_name(dev, ifname) < 0) {
-		DMESG("Oops: devname already taken! Trying wlan%%d...\n");
-		strcpy(ifname, "wlan%d");
-		dev_alloc_name(dev, ifname);
-	}
-
-	if (rtl8180_init(dev) != 0) {
-		DMESG("Initialization failed");
-		goto fail1;
-	}
-
-	netif_carrier_off(dev);
-
-	if (register_netdev(dev))
-		goto fail1;
-
-	rtl8180_proc_init_one(dev);
-
-	DMESG("Driver probe completed\n");
-	return 0;
-fail1:
-	if (dev->mem_start != (unsigned long)NULL) {
-		iounmap((void __iomem *)dev->mem_start);
-		release_mem_region(pci_resource_start(pdev, 1),
-				   pci_resource_len(pdev, 1));
-	}
-fail:
-	if (dev) {
-		if (priv->irq) {
-			free_irq(dev->irq, dev);
-			dev->irq = 0;
-		}
-		free_ieee80211(dev);
-	}
-
-fail_free:
-	pci_disable_device(pdev);
-
-	DMESG("wlan driver load failed\n");
-	return ret;
-}
-
-static void rtl8180_pci_remove(struct pci_dev *pdev)
-{
-	struct r8180_priv *priv;
-	struct net_device *dev = pci_get_drvdata(pdev);
-
-	if (dev) {
-		unregister_netdev(dev);
-
-		priv = ieee80211_priv(dev);
-
-		rtl8180_proc_remove_one(dev);
-		rtl8180_down(dev);
-		priv->rf_close(dev);
-		rtl8180_reset(dev);
-		mdelay(10);
-
-		if (priv->irq) {
-			DMESG("Freeing irq %d", dev->irq);
-			free_irq(dev->irq, dev);
-			priv->irq = 0;
-		}
-
-		free_rx_desc_ring(dev);
-		free_tx_desc_rings(dev);
-
-		if (dev->mem_start != (unsigned long)NULL) {
-			iounmap((void __iomem *)dev->mem_start);
-			release_mem_region(pci_resource_start(pdev, 1),
-					   pci_resource_len(pdev, 1));
-		}
-
-		free_ieee80211(dev);
-	}
-	pci_disable_device(pdev);
-
-	DMESG("wlan driver removed\n");
-}
-
-static int __init rtl8180_pci_module_init(void)
-{
-	int ret;
-
-	ret = ieee80211_crypto_init();
-	if (ret) {
-		pr_err("ieee80211_crypto_init() failed %d\n", ret);
-		return ret;
-	}
-	ret = ieee80211_crypto_tkip_init();
-	if (ret) {
-		pr_err("ieee80211_crypto_tkip_init() failed %d\n", ret);
-		return ret;
-	}
-	ret = ieee80211_crypto_ccmp_init();
-	if (ret) {
-		pr_err("ieee80211_crypto_ccmp_init() failed %d\n", ret);
-		return ret;
-	}
-	ret = ieee80211_crypto_wep_init();
-	if (ret) {
-		pr_err("ieee80211_crypto_wep_init() failed %d\n", ret);
-		return ret;
-	}
-
-	pr_info("\nLinux kernel driver for RTL8180 / RTL8185 based WLAN cards\n");
-	pr_info("Copyright (c) 2004-2005, Andrea Merello\n");
-	DMESG("Initializing module");
-	DMESG("Wireless extensions version %d", WIRELESS_EXT);
-	rtl8180_proc_module_init();
-
-	if (pci_register_driver(&rtl8180_pci_driver)) {
-		DMESG("No device found");
-		return -ENODEV;
-	}
-	return 0;
-}
-
-static void __exit rtl8180_pci_module_exit(void)
-{
-	pci_unregister_driver(&rtl8180_pci_driver);
-	rtl8180_proc_module_remove();
-	ieee80211_crypto_tkip_exit();
-	ieee80211_crypto_ccmp_exit();
-	ieee80211_crypto_wep_exit();
-	ieee80211_crypto_deinit();
-	DMESG("Exiting");
-}
-
-static void rtl8180_try_wake_queue(struct net_device *dev, int pri)
-{
-	unsigned long flags;
-	short enough_desc;
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
-	spin_lock_irqsave(&priv->tx_lock, flags);
-	enough_desc = check_nic_enought_desc(dev, pri);
-	spin_unlock_irqrestore(&priv->tx_lock, flags);
-
-	if (enough_desc)
-		ieee80211_rtl_wake_queue(priv->ieee80211);
-}
-
-static void rtl8180_tx_isr(struct net_device *dev, int pri, short error)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	u32 *tail; /* tail virtual addr */
-	u32 *head; /* head virtual addr */
-	u32 *begin; /* start of ring virtual addr */
-	u32 *nicv; /* nic pointer virtual addr */
-	u32 nic; /* nic pointer physical addr */
-	u32 nicbegin; /* start of ring physical addr */
-	unsigned long flag;
-	/* physical addr are ok on 32 bits since we set DMA mask */
-	int offs;
-	int j, i;
-	int hd;
-	if (error)
-		priv->stats.txretry++;
-	spin_lock_irqsave(&priv->tx_lock, flag);
-	switch (pri) {
-	case MANAGE_PRIORITY:
-		tail = priv->txmapringtail;
-		begin = priv->txmapring;
-		head = priv->txmapringhead;
-		nic = read_nic_dword(dev, TX_MANAGEPRIORITY_RING_ADDR);
-		nicbegin = priv->txmapringdma;
-		break;
-	case BK_PRIORITY:
-		tail = priv->txbkpringtail;
-		begin = priv->txbkpring;
-		head = priv->txbkpringhead;
-		nic = read_nic_dword(dev, TX_BKPRIORITY_RING_ADDR);
-		nicbegin = priv->txbkpringdma;
-		break;
-	case BE_PRIORITY:
-		tail = priv->txbepringtail;
-		begin = priv->txbepring;
-		head = priv->txbepringhead;
-		nic = read_nic_dword(dev, TX_BEPRIORITY_RING_ADDR);
-		nicbegin = priv->txbepringdma;
-		break;
-	case VI_PRIORITY:
-		tail = priv->txvipringtail;
-		begin = priv->txvipring;
-		head = priv->txvipringhead;
-		nic = read_nic_dword(dev, TX_VIPRIORITY_RING_ADDR);
-		nicbegin = priv->txvipringdma;
-		break;
-	case VO_PRIORITY:
-		tail = priv->txvopringtail;
-		begin = priv->txvopring;
-		head = priv->txvopringhead;
-		nic = read_nic_dword(dev, TX_VOPRIORITY_RING_ADDR);
-		nicbegin = priv->txvopringdma;
-		break;
-	case HI_PRIORITY:
-		tail = priv->txhpringtail;
-		begin = priv->txhpring;
-		head = priv->txhpringhead;
-		nic = read_nic_dword(dev, TX_HIGHPRIORITY_RING_ADDR);
-		nicbegin = priv->txhpringdma;
-		break;
-
-	default:
-		spin_unlock_irqrestore(&priv->tx_lock, flag);
-		return;
-	}
-
-	nicv = (u32 *)((nic - nicbegin) + (u8 *)begin);
-	if ((head <= tail && (nicv > tail || nicv < head)) ||
-		(head > tail && (nicv > tail && nicv < head))) {
-			DMESGW("nic has lost pointer");
-			spin_unlock_irqrestore(&priv->tx_lock, flag);
-			rtl8180_restart(dev);
-			return;
-		}
-
-	/*
-	 * We check all the descriptors between the head and the nic,
-	 * but not the currently pointed by the nic (the next to be txed)
-	 * and the previous of the pointed (might be in process ??)
-	 */
-	offs = (nic - nicbegin);
-	offs = offs / 8 / 4;
-	hd = (head - begin) / 8;
-
-	if (offs >= hd)
-		j = offs - hd;
-	else
-		j = offs + (priv->txringcount-1-hd);
-
-	j -= 2;
-	if (j < 0)
-		j = 0;
-
-	for (i = 0; i < j; i++) {
-		if ((*head) & (1<<31))
-			break;
-		if (((*head)&(0x10000000)) != 0) {
-			priv->CurrRetryCnt += (u16)((*head) & (0x000000ff));
-			if (!error)
-				priv->NumTxOkTotal++;
-		}
-
-		if (!error)
-			priv->NumTxOkBytesTotal += (*(head+3)) & (0x00000fff);
-
-		*head = *head & ~(1<<31);
-
-		if ((head - begin)/8 == priv->txringcount-1)
-			head = begin;
-		else
-			head += 8;
-	}
-
-	/*
-	 * The head has been moved to the last certainly TXed
-	 * (or at least processed by the nic) packet.
-	 * The driver take forcefully owning of all these packets
-	 * If the packet previous of the nic pointer has been
-	 * processed this doesn't matter: it will be checked
-	 * here at the next round. Anyway if no more packet are
-	 * TXed no memory leak occur at all.
-	 */
-
-	switch (pri) {
-	case MANAGE_PRIORITY:
-		priv->txmapringhead = head;
-
-		if (priv->ack_tx_to_ieee) {
-			if (rtl8180_is_tx_queue_empty(dev)) {
-				priv->ack_tx_to_ieee = 0;
-				ieee80211_ps_tx_ack(priv->ieee80211, !error);
-			}
-		}
-		break;
-	case BK_PRIORITY:
-		priv->txbkpringhead = head;
-		break;
-	case BE_PRIORITY:
-		priv->txbepringhead = head;
-		break;
-	case VI_PRIORITY:
-		priv->txvipringhead = head;
-		break;
-	case VO_PRIORITY:
-		priv->txvopringhead = head;
-		break;
-	case HI_PRIORITY:
-		priv->txhpringhead = head;
-		break;
-	}
-
-	spin_unlock_irqrestore(&priv->tx_lock, flag);
-}
-
-static irqreturn_t rtl8180_interrupt(int irq, void *netdev)
-{
-	struct net_device *dev = (struct net_device *) netdev;
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	unsigned long flags;
-	u32 inta;
-
-	/* We should return IRQ_NONE, but for now let me keep this */
-	if (priv->irq_enabled == 0)
-		return IRQ_HANDLED;
-
-	spin_lock_irqsave(&priv->irq_th_lock, flags);
-
-	/* ISR: 4bytes */
-	inta = read_nic_dword(dev, ISR);
-	write_nic_dword(dev, ISR, inta); /* reset int situation */
-
-	priv->stats.shints++;
-
-	if (!inta) {
-		spin_unlock_irqrestore(&priv->irq_th_lock, flags);
-		return IRQ_HANDLED;
-	/*
-	 * most probably we can safely return IRQ_NONE,
-	 * but for now is better to avoid problems
-	 */
-	}
-
-	if (inta == 0xffff) {
-		/* HW disappeared */
-		spin_unlock_irqrestore(&priv->irq_th_lock, flags);
-		return IRQ_HANDLED;
-	}
-
-	priv->stats.ints++;
-
-	if (!netif_running(dev)) {
-		spin_unlock_irqrestore(&priv->irq_th_lock, flags);
-		return IRQ_HANDLED;
-	}
-
-	if (inta & ISR_TimeOut)
-		write_nic_dword(dev, TimerInt, 0);
-
-	if (inta & ISR_TBDOK)
-		priv->stats.txbeacon++;
-
-	if (inta & ISR_TBDER)
-		priv->stats.txbeaconerr++;
-
-	if (inta & IMR_TMGDOK)
-		rtl8180_tx_isr(dev, MANAGE_PRIORITY, 0);
-
-	if (inta & ISR_THPDER) {
-		priv->stats.txhperr++;
-		rtl8180_tx_isr(dev, HI_PRIORITY, 1);
-		priv->ieee80211->stats.tx_errors++;
-	}
-
-	if (inta & ISR_THPDOK) { /* High priority tx ok */
-		priv->link_detect.num_tx_ok_in_period++;
-		priv->stats.txhpokint++;
-		rtl8180_tx_isr(dev, HI_PRIORITY, 0);
-	}
-
-	if (inta & ISR_RER)
-		priv->stats.rxerr++;
-
-	if (inta & ISR_TBKDER) { /* corresponding to BK_PRIORITY */
-		priv->stats.txbkperr++;
-		priv->ieee80211->stats.tx_errors++;
-		rtl8180_tx_isr(dev, BK_PRIORITY, 1);
-		rtl8180_try_wake_queue(dev, BK_PRIORITY);
-	}
-
-	if (inta & ISR_TBEDER) { /* corresponding to BE_PRIORITY */
-		priv->stats.txbeperr++;
-		priv->ieee80211->stats.tx_errors++;
-		rtl8180_tx_isr(dev, BE_PRIORITY, 1);
-		rtl8180_try_wake_queue(dev, BE_PRIORITY);
-	}
-	if (inta & ISR_TNPDER) { /* corresponding to VO_PRIORITY */
-		priv->stats.txnperr++;
-		priv->ieee80211->stats.tx_errors++;
-		rtl8180_tx_isr(dev, NORM_PRIORITY, 1);
-		rtl8180_try_wake_queue(dev, NORM_PRIORITY);
-	}
-
-	if (inta & ISR_TLPDER) { /* corresponding to VI_PRIORITY */
-		priv->stats.txlperr++;
-		priv->ieee80211->stats.tx_errors++;
-		rtl8180_tx_isr(dev, LOW_PRIORITY, 1);
-		rtl8180_try_wake_queue(dev, LOW_PRIORITY);
-	}
-
-	if (inta & ISR_ROK) {
-		priv->stats.rxint++;
-		tasklet_schedule(&priv->irq_rx_tasklet);
-	}
-
-	if (inta & ISR_RQoSOK) {
-		priv->stats.rxint++;
-		tasklet_schedule(&priv->irq_rx_tasklet);
-	}
-
-	if (inta & ISR_BcnInt)
-		rtl8180_prepare_beacon(dev);
-
-	if (inta & ISR_RDU) {
-		DMESGW("No RX descriptor available");
-		priv->stats.rxrdu++;
-		tasklet_schedule(&priv->irq_rx_tasklet);
-	}
-
-	if (inta & ISR_RXFOVW) {
-		priv->stats.rxoverflow++;
-		tasklet_schedule(&priv->irq_rx_tasklet);
-	}
-
-	if (inta & ISR_TXFOVW)
-		priv->stats.txoverflow++;
-
-	if (inta & ISR_TNPDOK) { /* Normal priority tx ok */
-		priv->link_detect.num_tx_ok_in_period++;
-		priv->stats.txnpokint++;
-		rtl8180_tx_isr(dev, NORM_PRIORITY, 0);
-		rtl8180_try_wake_queue(dev, NORM_PRIORITY);
-	}
-
-	if (inta & ISR_TLPDOK) { /* Low priority tx ok */
-		priv->link_detect.num_tx_ok_in_period++;
-		priv->stats.txlpokint++;
-		rtl8180_tx_isr(dev, LOW_PRIORITY, 0);
-		rtl8180_try_wake_queue(dev, LOW_PRIORITY);
-	}
-
-	if (inta & ISR_TBKDOK) { /* corresponding to BK_PRIORITY */
-		priv->stats.txbkpokint++;
-		priv->link_detect.num_tx_ok_in_period++;
-		rtl8180_tx_isr(dev, BK_PRIORITY, 0);
-		rtl8180_try_wake_queue(dev, BE_PRIORITY);
-	}
-
-	if (inta & ISR_TBEDOK) { /* corresponding to BE_PRIORITY */
-		priv->stats.txbeperr++;
-		priv->link_detect.num_tx_ok_in_period++;
-		rtl8180_tx_isr(dev, BE_PRIORITY, 0);
-		rtl8180_try_wake_queue(dev, BE_PRIORITY);
-	}
-	force_pci_posting(dev);
-	spin_unlock_irqrestore(&priv->irq_th_lock, flags);
-
-	return IRQ_HANDLED;
-}
-
-void rtl8180_irq_rx_tasklet(struct r8180_priv *priv)
-{
-	rtl8180_rx(priv->dev);
-}
-
-void GPIOChangeRFWorkItemCallBack(struct work_struct *work)
-{
-	struct ieee80211_device *ieee = container_of(
-		work, struct ieee80211_device, GPIOChangeRFWorkItem.work);
-	struct net_device *dev = ieee->dev;
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	u8 btPSR;
-	u8 btConfig0;
-	enum rt_rf_power_state eRfPowerStateToSet;
-	bool bActuallySet = false;
-
-	char *argv[3];
-	static char *RadioPowerPath = "/etc/acpi/events/RadioPower.sh";
-	static char *envp[] = {"HOME=/", "TERM=linux",
-		"PATH=/usr/bin:/bin", NULL};
-	static int readf_count;
-
-	readf_count = (readf_count+1)%0xffff;
-	/* We should turn off LED before polling FF51[4]. */
-
-	/* Turn off LED. */
-	btPSR = read_nic_byte(dev, PSR);
-	write_nic_byte(dev, PSR, (btPSR & ~BIT3));
-
-	/* It need to delay 4us suggested */
-	udelay(4);
-
-	/* HW radio On/Off according to the value of FF51[4](config0) */
-	btConfig0 = btPSR = read_nic_byte(dev, CONFIG0);
-
-	eRfPowerStateToSet = (btConfig0 & BIT4) ?  RF_ON : RF_OFF;
-
-	/* Turn LED back on when radio enabled */
-	if (eRfPowerStateToSet == RF_ON)
-		write_nic_byte(dev, PSR, btPSR | BIT3);
-
-	if ((priv->ieee80211->bHwRadioOff == true) &&
-	   (eRfPowerStateToSet == RF_ON)) {
-		priv->ieee80211->bHwRadioOff = false;
-		bActuallySet = true;
-	} else if ((priv->ieee80211->bHwRadioOff == false) &&
-		  (eRfPowerStateToSet == RF_OFF)) {
-		priv->ieee80211->bHwRadioOff = true;
-		bActuallySet = true;
-	}
-
-	if (bActuallySet) {
-		MgntActSet_RF_State(dev, eRfPowerStateToSet, RF_CHANGE_BY_HW);
-
-		/* To update the UI status for Power status changed */
-		if (priv->ieee80211->bHwRadioOff == true)
-			argv[1] = "RFOFF";
-		else
-			argv[1] = "RFON";
-		argv[0] = RadioPowerPath;
-		argv[2] = NULL;
-
-		call_usermodehelper(RadioPowerPath, argv, envp, UMH_WAIT_PROC);
-	}
-}
-
-module_init(rtl8180_pci_module_init);
-module_exit(rtl8180_pci_module_exit);
diff --git a/drivers/staging/rtl8187se/r8180_dm.c b/drivers/staging/rtl8187se/r8180_dm.c
deleted file mode 100644
index 8c020e064869..000000000000
--- a/drivers/staging/rtl8187se/r8180_dm.c
+++ /dev/null
@@ -1,1139 +0,0 @@
-#include "r8180_dm.h"
-#include "r8180_hw.h"
-#include "r8180_93cx6.h"
-
- /*	Return TRUE if we shall perform High Power Mechanism, FALSE otherwise. */
-#define RATE_ADAPTIVE_TIMER_PERIOD      300
-
-bool CheckHighPower(struct net_device *dev)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	struct ieee80211_device *ieee = priv->ieee80211;
-
-	if (!priv->bRegHighPowerMechanism)
-		return false;
-
-	if (ieee->state == IEEE80211_LINKED_SCANNING)
-		return false;
-
-	return true;
-}
-
-/*
- *	Description:
- *		Update Tx power level if necessary.
- *		See also DoRxHighPower() and SetTxPowerLevel8185() for reference.
- *
- *	Note:
- *		The reason why we udpate Tx power level here instead of DoRxHighPower()
- *		is the number of IO to change Tx power is much more than channel TR switch
- *		and they are related to OFDM and MAC registers.
- *		So, we don't want to update it so frequently in per-Rx packet base.
- */
-static void DoTxHighPower(struct net_device *dev)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	u16			HiPwrUpperTh = 0;
-	u16			HiPwrLowerTh = 0;
-	u8			RSSIHiPwrUpperTh;
-	u8			RSSIHiPwrLowerTh;
-	u8			u1bTmp;
-	char			OfdmTxPwrIdx, CckTxPwrIdx;
-
-	HiPwrUpperTh = priv->RegHiPwrUpperTh;
-	HiPwrLowerTh = priv->RegHiPwrLowerTh;
-
-	HiPwrUpperTh = HiPwrUpperTh * 10;
-	HiPwrLowerTh = HiPwrLowerTh * 10;
-	RSSIHiPwrUpperTh = priv->RegRSSIHiPwrUpperTh;
-	RSSIHiPwrLowerTh = priv->RegRSSIHiPwrLowerTh;
-
-	/* lzm add 080826 */
-	OfdmTxPwrIdx  = priv->chtxpwr_ofdm[priv->ieee80211->current_network.channel];
-	CckTxPwrIdx  = priv->chtxpwr[priv->ieee80211->current_network.channel];
-
-	if ((priv->UndecoratedSmoothedSS > HiPwrUpperTh) ||
-		(priv->bCurCCKPkt && (priv->CurCCKRSSI > RSSIHiPwrUpperTh))) {
-		/* Stevenl suggested that degrade 8dbm in high power sate. 2007-12-04 Isaiah */
-
-		priv->bToUpdateTxPwr = true;
-		u1bTmp = read_nic_byte(dev, CCK_TXAGC);
-
-		/* If it never enter High Power. */
-		if (CckTxPwrIdx == u1bTmp) {
-			u1bTmp = (u1bTmp > 16) ? (u1bTmp - 16) : 0;  /* 8dbm */
-			write_nic_byte(dev, CCK_TXAGC, u1bTmp);
-
-			u1bTmp = read_nic_byte(dev, OFDM_TXAGC);
-			u1bTmp = (u1bTmp > 16) ? (u1bTmp - 16) : 0;  /* 8dbm */
-			write_nic_byte(dev, OFDM_TXAGC, u1bTmp);
-		}
-
-	} else if ((priv->UndecoratedSmoothedSS < HiPwrLowerTh) &&
-		(!priv->bCurCCKPkt || priv->CurCCKRSSI < RSSIHiPwrLowerTh)) {
-		if (priv->bToUpdateTxPwr) {
-			priv->bToUpdateTxPwr = false;
-			/* SD3 required. */
-			u1bTmp = read_nic_byte(dev, CCK_TXAGC);
-			if (u1bTmp < CckTxPwrIdx) {
-				write_nic_byte(dev, CCK_TXAGC, CckTxPwrIdx);
-			}
-
-			u1bTmp = read_nic_byte(dev, OFDM_TXAGC);
-			if (u1bTmp < OfdmTxPwrIdx) {
-				write_nic_byte(dev, OFDM_TXAGC, OfdmTxPwrIdx);
-			}
-		}
-	}
-}
-
-
-/*
- *	Description:
- *		Callback function of UpdateTxPowerWorkItem.
- *		Because of some event happened, e.g. CCX TPC, High Power Mechanism,
- *		We update Tx power of current channel again.
- */
-void rtl8180_tx_pw_wq(struct work_struct *work)
-{
-	struct delayed_work *dwork = to_delayed_work(work);
-	struct ieee80211_device *ieee = container_of(dwork, struct ieee80211_device, tx_pw_wq);
-	struct net_device *dev = ieee->dev;
-
-	DoTxHighPower(dev);
-}
-
-
-/*
- *	Return TRUE if we shall perform DIG Mechanism, FALSE otherwise.
- */
-bool CheckDig(struct net_device *dev)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	struct ieee80211_device *ieee = priv->ieee80211;
-
-	if (!priv->bDigMechanism)
-		return false;
-
-	if (ieee->state != IEEE80211_LINKED)
-		return false;
-
-	if ((priv->ieee80211->rate / 5) < 36) /* Schedule Dig under all OFDM rates. By Bruce, 2007-06-01. */
-		return false;
-	return true;
-}
-/*
- *	Implementation of DIG for Zebra and Zebra2.
- */
-static void DIG_Zebra(struct net_device *dev)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	u16			CCKFalseAlarm, OFDMFalseAlarm;
-	u16			OfdmFA1, OfdmFA2;
-	int			InitialGainStep = 7; /* The number of initial gain stages. */
-	int			LowestGainStage = 4; /* The capable lowest stage of performing dig workitem. */
-	u32			AwakePeriodIn2Sec = 0;
-
-	CCKFalseAlarm = (u16)(priv->FalseAlarmRegValue & 0x0000ffff);
-	OFDMFalseAlarm = (u16)((priv->FalseAlarmRegValue >> 16) & 0x0000ffff);
-	OfdmFA1 =  0x15;
-	OfdmFA2 = ((u16)(priv->RegDigOfdmFaUpTh)) << 8;
-
-	/* The number of initial gain steps is different, by Bruce, 2007-04-13. */
-	if (priv->InitialGain == 0) { /* autoDIG */
-		/* Advised from SD3 DZ */
-		priv->InitialGain = 4; /* In 87B, m74dBm means State 4 (m82dBm) */
-	}
-	/* Advised from SD3 DZ */
-	OfdmFA1 = 0x20;
-
-#if 1 /* lzm reserved 080826 */
-	AwakePeriodIn2Sec = (2000 - priv->DozePeriodInPast2Sec);
-	priv->DozePeriodInPast2Sec = 0;
-
-	if (AwakePeriodIn2Sec) {
-		OfdmFA1 = (u16)((OfdmFA1 * AwakePeriodIn2Sec) / 2000);
-		OfdmFA2 = (u16)((OfdmFA2 * AwakePeriodIn2Sec) / 2000);
-	} else {
-		;
-	}
-#endif
-
-	InitialGainStep = 8;
-	LowestGainStage = priv->RegBModeGainStage; /* Lowest gain stage. */
-
-	if (OFDMFalseAlarm > OfdmFA1) {
-		if (OFDMFalseAlarm > OfdmFA2) {
-			priv->DIG_NumberFallbackVote++;
-			if (priv->DIG_NumberFallbackVote > 1) {
-				/* serious OFDM  False Alarm, need fallback */
-				if (priv->InitialGain < InitialGainStep) {
-					priv->InitialGainBackUp = priv->InitialGain;
-
-					priv->InitialGain = (priv->InitialGain + 1);
-					UpdateInitialGain(dev);
-				}
-				priv->DIG_NumberFallbackVote = 0;
-				priv->DIG_NumberUpgradeVote = 0;
-			}
-		} else {
-			if (priv->DIG_NumberFallbackVote)
-				priv->DIG_NumberFallbackVote--;
-		}
-		priv->DIG_NumberUpgradeVote = 0;
-	} else {
-		if (priv->DIG_NumberFallbackVote)
-			priv->DIG_NumberFallbackVote--;
-		priv->DIG_NumberUpgradeVote++;
-
-		if (priv->DIG_NumberUpgradeVote > 9) {
-			if (priv->InitialGain > LowestGainStage) { /* In 87B, m78dBm means State 4 (m864dBm) */
-				priv->InitialGainBackUp = priv->InitialGain;
-
-				priv->InitialGain = (priv->InitialGain - 1);
-				UpdateInitialGain(dev);
-			}
-			priv->DIG_NumberFallbackVote = 0;
-			priv->DIG_NumberUpgradeVote = 0;
-		}
-	}
-}
-
-/*
- *	Dispatch DIG implementation according to RF.
- */
-static void DynamicInitGain(struct net_device *dev)
-{
-	DIG_Zebra(dev);
-}
-
-void rtl8180_hw_dig_wq(struct work_struct *work)
-{
-	struct delayed_work *dwork = to_delayed_work(work);
-	struct ieee80211_device *ieee = container_of(dwork, struct ieee80211_device, hw_dig_wq);
-	struct net_device *dev = ieee->dev;
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	/* Read CCK and OFDM False Alarm. */
-	priv->FalseAlarmRegValue = read_nic_dword(dev, CCK_FALSE_ALARM);
-
-
-	/* Adjust Initial Gain dynamically. */
-	DynamicInitGain(dev);
-
-}
-
-static int IncludedInSupportedRates(struct r8180_priv *priv, u8 TxRate)
-{
-	u8 rate_len;
-	u8 rate_ex_len;
-	u8                      RateMask = 0x7F;
-	u8                      idx;
-	unsigned short          Found = 0;
-	u8                      NaiveTxRate = TxRate&RateMask;
-
-	rate_len = priv->ieee80211->current_network.rates_len;
-	rate_ex_len = priv->ieee80211->current_network.rates_ex_len;
-	for (idx = 0; idx < rate_len; idx++) {
-		if ((priv->ieee80211->current_network.rates[idx] & RateMask) == NaiveTxRate) {
-			Found = 1;
-			goto found_rate;
-		}
-	}
-	for (idx = 0; idx < rate_ex_len; idx++) {
-		if ((priv->ieee80211->current_network.rates_ex[idx] & RateMask) == NaiveTxRate) {
-			Found = 1;
-			goto found_rate;
-		}
-	}
-	return Found;
-found_rate:
-	return Found;
-}
-
-/*
- *	Get the Tx rate one degree up form the input rate in the supported rates.
- *	Return the upgrade rate if it is successed, otherwise return the input rate.
- */
-static u8 GetUpgradeTxRate(struct net_device *dev, u8 rate)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	u8                      UpRate;
-
-	/* Upgrade 1 degree. */
-	switch (rate) {
-	case 108: /* Up to 54Mbps. */
-		UpRate = 108;
-		break;
-
-	case 96: /* Up to 54Mbps. */
-		UpRate = 108;
-		break;
-
-	case 72: /* Up to 48Mbps. */
-		UpRate = 96;
-		break;
-
-	case 48: /* Up to 36Mbps. */
-		UpRate = 72;
-		break;
-
-	case 36: /* Up to 24Mbps. */
-		UpRate = 48;
-		break;
-
-	case 22: /* Up to 18Mbps. */
-		UpRate = 36;
-		break;
-
-	case 11: /* Up to 11Mbps. */
-		UpRate = 22;
-		break;
-
-	case 4: /* Up to 5.5Mbps. */
-		UpRate = 11;
-		break;
-
-	case 2: /* Up to 2Mbps. */
-		UpRate = 4;
-		break;
-
-	default:
-		printk("GetUpgradeTxRate(): Input Tx Rate(%d) is undefined!\n", rate);
-		return rate;
-	}
-	/* Check if the rate is valid. */
-	if (IncludedInSupportedRates(priv, UpRate)) {
-		return UpRate;
-	} else {
-		return rate;
-	}
-	return rate;
-}
-/*
- *	Get the Tx rate one degree down form the input rate in the supported rates.
- *	Return the degrade rate if it is successed, otherwise return the input rate.
- */
-
-static u8 GetDegradeTxRate(struct net_device *dev, u8 rate)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	u8                      DownRate;
-
-	/* Upgrade 1 degree. */
-	switch (rate) {
-	case 108: /* Down to 48Mbps. */
-		DownRate = 96;
-		break;
-
-	case 96: /* Down to 36Mbps. */
-		DownRate = 72;
-		break;
-
-	case 72: /* Down to 24Mbps. */
-		DownRate = 48;
-		break;
-
-	case 48: /* Down to 18Mbps. */
-		DownRate = 36;
-		break;
-
-	case 36: /* Down to 11Mbps. */
-		DownRate = 22;
-		break;
-
-	case 22: /* Down to 5.5Mbps. */
-		DownRate = 11;
-		break;
-
-	case 11: /* Down to 2Mbps. */
-		DownRate = 4;
-		break;
-
-	case 4: /* Down to 1Mbps. */
-		DownRate = 2;
-		break;
-
-	case 2: /* Down to 1Mbps. */
-		DownRate = 2;
-		break;
-
-	default:
-		printk("GetDegradeTxRate(): Input Tx Rate(%d) is undefined!\n", rate);
-		return rate;
-	}
-	/* Check if the rate is valid. */
-	if (IncludedInSupportedRates(priv, DownRate)) {
-		return DownRate;
-	} else {
-		return rate;
-	}
-	return rate;
-}
-/*
- *      Helper function to determine if specified data rate is
- *      CCK rate.
- */
-
-static bool MgntIsCckRate(u16 rate)
-{
-	bool bReturn = false;
-
-	if ((rate <= 22) && (rate != 12) && (rate != 18)) {
-		bReturn = true;
-	}
-
-	return bReturn;
-}
-/*
- *	Description:
- *		Tx Power tracking mechanism routine on 87SE.
- */
-void TxPwrTracking87SE(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	u8	tmpu1Byte, CurrentThermal, Idx;
-	char	CckTxPwrIdx, OfdmTxPwrIdx;
-
-	tmpu1Byte = read_nic_byte(dev, EN_LPF_CAL);
-	CurrentThermal = (tmpu1Byte & 0xf0) >> 4; /*[ 7:4]: thermal meter indication. */
-	CurrentThermal = (CurrentThermal > 0x0c) ? 0x0c : CurrentThermal;/* lzm add 080826 */
-
-	if (CurrentThermal != priv->ThermalMeter) {
-		/* Update Tx Power level on each channel. */
-		for (Idx = 1; Idx < 15; Idx++) {
-			CckTxPwrIdx = priv->chtxpwr[Idx];
-			OfdmTxPwrIdx = priv->chtxpwr_ofdm[Idx];
-
-			if (CurrentThermal > priv->ThermalMeter) {
-				/* higher thermal meter. */
-				CckTxPwrIdx += (CurrentThermal - priv->ThermalMeter) * 2;
-				OfdmTxPwrIdx += (CurrentThermal - priv->ThermalMeter) * 2;
-
-				if (CckTxPwrIdx > 35)
-					CckTxPwrIdx = 35; /* Force TxPower to maximal index. */
-				if (OfdmTxPwrIdx > 35)
-					OfdmTxPwrIdx = 35;
-			} else {
-				/* lower thermal meter. */
-				CckTxPwrIdx -= (priv->ThermalMeter - CurrentThermal) * 2;
-				OfdmTxPwrIdx -= (priv->ThermalMeter - CurrentThermal) * 2;
-
-				if (CckTxPwrIdx < 0)
-					CckTxPwrIdx = 0;
-				if (OfdmTxPwrIdx < 0)
-					OfdmTxPwrIdx = 0;
-			}
-
-			/* Update TxPower level on CCK and OFDM resp. */
-			priv->chtxpwr[Idx] = CckTxPwrIdx;
-			priv->chtxpwr_ofdm[Idx] = OfdmTxPwrIdx;
-		}
-
-		/* Update TxPower level immediately. */
-		rtl8225z2_SetTXPowerLevel(dev, priv->ieee80211->current_network.channel);
-	}
-	priv->ThermalMeter = CurrentThermal;
-}
-static void StaRateAdaptive87SE(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	unsigned long	CurrTxokCnt;
-	u16		CurrRetryCnt;
-	u16		CurrRetryRate;
-	unsigned long	CurrRxokCnt;
-	bool		bTryUp = false;
-	bool		bTryDown = false;
-	u8		TryUpTh = 1;
-	u8		TryDownTh = 2;
-	u32		TxThroughput;
-	long		CurrSignalStrength;
-	bool		bUpdateInitialGain = false;
-	u8		u1bOfdm = 0, u1bCck = 0;
-	char		OfdmTxPwrIdx, CckTxPwrIdx;
-
-	priv->RateAdaptivePeriod = RATE_ADAPTIVE_TIMER_PERIOD;
-
-
-	CurrRetryCnt	= priv->CurrRetryCnt;
-	CurrTxokCnt	= priv->NumTxOkTotal - priv->LastTxokCnt;
-	CurrRxokCnt	= priv->ieee80211->NumRxOkTotal - priv->LastRxokCnt;
-	CurrSignalStrength = priv->Stats_RecvSignalPower;
-	TxThroughput = (u32)(priv->NumTxOkBytesTotal - priv->LastTxOKBytes);
-	priv->LastTxOKBytes = priv->NumTxOkBytesTotal;
-	priv->CurrentOperaRate = priv->ieee80211->rate / 5;
-	/* 2 Compute retry ratio. */
-	if (CurrTxokCnt > 0) {
-		CurrRetryRate = (u16)(CurrRetryCnt * 100 / CurrTxokCnt);
-	} else {
-	/* It may be serious retry. To distinguish serious retry or no packets modified by Bruce */
-		CurrRetryRate = (u16)(CurrRetryCnt * 100 / 1);
-	}
-
-	priv->LastRetryCnt = priv->CurrRetryCnt;
-	priv->LastTxokCnt = priv->NumTxOkTotal;
-	priv->LastRxokCnt = priv->ieee80211->NumRxOkTotal;
-	priv->CurrRetryCnt = 0;
-
-	/* 2No Tx packets, return to init_rate or not? */
-	if (CurrRetryRate == 0 && CurrTxokCnt == 0) {
-		/*
-		 * After 9 (30*300ms) seconds in this condition, we try to raise rate.
-		 */
-		priv->TryupingCountNoData++;
-
-		/* [TRC Dell Lab] Extend raised period from 4.5sec to 9sec, Isaiah 2008-02-15 18:00 */
-		if (priv->TryupingCountNoData > 30) {
-			priv->TryupingCountNoData = 0;
-			priv->CurrentOperaRate = GetUpgradeTxRate(dev, priv->CurrentOperaRate);
-			/* Reset Fail Record */
-			priv->LastFailTxRate = 0;
-			priv->LastFailTxRateSS = -200;
-			priv->FailTxRateCount = 0;
-		}
-		goto SetInitialGain;
-	} else {
-		priv->TryupingCountNoData = 0; /*Reset trying up times. */
-	}
-
-
-	/*
-	 * For Netgear case, I comment out the following signal strength estimation,
-	 * which can results in lower rate to transmit when sample is NOT enough (e.g. PING request).
-	 *
-	 * Restructure rate adaptive as the following main stages:
-	 * (1) Add retry threshold in 54M upgrading condition with signal strength.
-	 * (2) Add the mechanism to degrade to CCK rate according to signal strength
-	 *		and retry rate.
-	 * (3) Remove all Initial Gain Updates over OFDM rate. To avoid the complicated
-	 *		situation, Initial Gain Update is upon on DIG mechanism except CCK rate.
-	 * (4) Add the mechanism of trying to upgrade tx rate.
-	 * (5) Record the information of upping tx rate to avoid trying upping tx rate constantly.
-	 *
-	 */
-
-	/*
-	 * 11Mbps or 36Mbps
-	 * Check more times in these rate(key rates).
-	 */
-	if (priv->CurrentOperaRate == 22 || priv->CurrentOperaRate == 72)
-		TryUpTh += 9;
-	/*
-	 * Let these rates down more difficult.
-	 */
-	if (MgntIsCckRate(priv->CurrentOperaRate) || priv->CurrentOperaRate == 36)
-		TryDownTh += 1;
-
-	/* 1 Adjust Rate. */
-	if (priv->bTryuping == true) {
-		/* 2 For Test Upgrading mechanism
-		 * Note:
-		 *	Sometimes the throughput is upon on the capability between the AP and NIC,
-		 *	thus the low data rate does not improve the performance.
-		 *	We randomly upgrade the data rate and check if the retry rate is improved.
-		 */
-
-		/* Upgrading rate did not improve the retry rate, fallback to the original rate. */
-		if ((CurrRetryRate > 25) && TxThroughput < priv->LastTxThroughput) {
-			/*Not necessary raising rate, fall back rate. */
-			bTryDown = true;
-		} else {
-			priv->bTryuping = false;
-		}
-	} else if (CurrSignalStrength > -47 && (CurrRetryRate < 50)) {
-		/*
-		 * 2For High Power
-		 *
-		 * Return to highest data rate, if signal strength is good enough.
-		 * SignalStrength threshold(-50dbm) is for RTL8186.
-		 * Revise SignalStrength threshold to -51dbm.
-		 */
-		/* Also need to check retry rate for safety, by Bruce, 2007-06-05. */
-		if (priv->CurrentOperaRate != priv->ieee80211->current_network.HighestOperaRate) {
-			bTryUp = true;
-			/* Upgrade Tx Rate directly. */
-			priv->TryupingCount += TryUpTh;
-		}
-
-	} else if (CurrTxokCnt > 9 && CurrTxokCnt < 100 && CurrRetryRate >= 600) {
-		/*
-		 *2 For Serious Retry
-		 *
-		 * Traffic is not busy but our Tx retry is serious.
-		 */
-		bTryDown = true;
-		/* Let Rate Mechanism to degrade tx rate directly. */
-		priv->TryDownCountLowData += TryDownTh;
-	} else if (priv->CurrentOperaRate == 108) {
-		/* 2For 54Mbps */
-		/* Air Link */
-		if ((CurrRetryRate > 26) && (priv->LastRetryRate > 25)) {
-			bTryDown = true;
-		}
-		/* Cable Link */
-		else if ((CurrRetryRate > 17) && (priv->LastRetryRate > 16) && (CurrSignalStrength > -72)) {
-			bTryDown = true;
-		}
-
-		if (bTryDown && (CurrSignalStrength < -75)) /* cable link */
-			priv->TryDownCountLowData += TryDownTh;
-	} else if (priv->CurrentOperaRate == 96) {
-		/* 2For 48Mbps */
-		/* Air Link */
-		if (((CurrRetryRate > 48) && (priv->LastRetryRate > 47))) {
-			bTryDown = true;
-		} else if (((CurrRetryRate > 21) && (priv->LastRetryRate > 20)) && (CurrSignalStrength > -74)) { /* Cable Link */
-			/* Down to rate 36Mbps. */
-			bTryDown = true;
-		} else if ((CurrRetryRate > (priv->LastRetryRate + 50)) && (priv->FailTxRateCount > 2)) {
-			bTryDown = true;
-			priv->TryDownCountLowData += TryDownTh;
-		} else if ((CurrRetryRate < 8) && (priv->LastRetryRate < 8)) { /* TO DO: need to consider (RSSI) */
-			bTryUp = true;
-		}
-
-		if (bTryDown && (CurrSignalStrength < -75)) {
-			priv->TryDownCountLowData += TryDownTh;
-		}
-	} else if (priv->CurrentOperaRate == 72) {
-		/* 2For 36Mbps */
-		if ((CurrRetryRate > 43) && (priv->LastRetryRate > 41)) {
-			/* Down to rate 24Mbps. */
-			bTryDown = true;
-		} else if ((CurrRetryRate > (priv->LastRetryRate + 50)) && (priv->FailTxRateCount > 2)) {
-			bTryDown = true;
-			priv->TryDownCountLowData += TryDownTh;
-		} else if ((CurrRetryRate < 15) &&  (priv->LastRetryRate < 16)) { /* TO DO: need to consider (RSSI) */
-			bTryUp = true;
-		}
-
-		if (bTryDown && (CurrSignalStrength < -80))
-			priv->TryDownCountLowData += TryDownTh;
-
-	} else if (priv->CurrentOperaRate == 48) {
-		/* 2For 24Mbps */
-		/* Air Link */
-		if (((CurrRetryRate > 63) && (priv->LastRetryRate > 62))) {
-			bTryDown = true;
-		} else if (((CurrRetryRate > 33) && (priv->LastRetryRate > 32)) && (CurrSignalStrength > -82)) { /* Cable Link */
-			bTryDown = true;
-		} else if ((CurrRetryRate > (priv->LastRetryRate + 50)) && (priv->FailTxRateCount > 2)) {
-			bTryDown = true;
-			priv->TryDownCountLowData += TryDownTh;
-		} else if ((CurrRetryRate < 20) && (priv->LastRetryRate < 21)) { /* TO DO: need to consider (RSSI) */
-			bTryUp = true;
-		}
-
-		if (bTryDown && (CurrSignalStrength < -82))
-			priv->TryDownCountLowData += TryDownTh;
-
-	} else if (priv->CurrentOperaRate == 36) {
-		if (((CurrRetryRate > 85) && (priv->LastRetryRate > 86))) {
-			bTryDown = true;
-		} else if ((CurrRetryRate > (priv->LastRetryRate + 50)) && (priv->FailTxRateCount > 2)) {
-			bTryDown = true;
-			priv->TryDownCountLowData += TryDownTh;
-		} else if ((CurrRetryRate < 22) && (priv->LastRetryRate < 23)) { /* TO DO: need to consider (RSSI) */
-			bTryUp = true;
-		}
-	} else if (priv->CurrentOperaRate == 22) {
-		/* 2For 11Mbps */
-		if (CurrRetryRate > 95) {
-			bTryDown = true;
-		} else if ((CurrRetryRate < 29) && (priv->LastRetryRate < 30)) { /*TO DO: need to consider (RSSI) */
-			bTryUp = true;
-		}
-	} else if (priv->CurrentOperaRate == 11) {
-		/* 2For 5.5Mbps */
-		if (CurrRetryRate > 149) {
-			bTryDown = true;
-		} else if ((CurrRetryRate < 60) && (priv->LastRetryRate < 65)) {
-			bTryUp = true;
-		}
-	} else if (priv->CurrentOperaRate == 4) {
-		/* 2For 2 Mbps */
-		if ((CurrRetryRate > 99) && (priv->LastRetryRate > 99)) {
-			bTryDown = true;
-		} else if ((CurrRetryRate < 65) && (priv->LastRetryRate < 70)) {
-			bTryUp = true;
-		}
-	} else if (priv->CurrentOperaRate == 2) {
-		/* 2For 1 Mbps */
-		if ((CurrRetryRate < 70) && (priv->LastRetryRate < 75)) {
-			bTryUp = true;
-		}
-	}
-
-	if (bTryUp && bTryDown)
-		printk("StaRateAdaptive87B(): Tx Rate tried upping and downing simultaneously!\n");
-
-	/* 1 Test Upgrading Tx Rate
-	 * Sometimes the cause of the low throughput (high retry rate) is the compatibility between the AP and NIC.
-	 * To test if the upper rate may cause lower retry rate, this mechanism randomly occurs to test upgrading tx rate.
-	 */
-	if (!bTryUp && !bTryDown && (priv->TryupingCount == 0) && (priv->TryDownCountLowData == 0)
-		&& priv->CurrentOperaRate != priv->ieee80211->current_network.HighestOperaRate && priv->FailTxRateCount < 2) {
-		if (jiffies % (CurrRetryRate + 101) == 0) {
-			bTryUp = true;
-			priv->bTryuping = true;
-		}
-	}
-
-	/* 1 Rate Mechanism */
-	if (bTryUp) {
-		priv->TryupingCount++;
-		priv->TryDownCountLowData = 0;
-
-		/*
-		 * Check more times if we need to upgrade indeed.
-		 * Because the largest value of pHalData->TryupingCount is 0xFFFF and
-		 * the largest value of pHalData->FailTxRateCount is 0x14,
-		 * this condition will be satisfied at most every 2 min.
-		 */
-
-		if ((priv->TryupingCount > (TryUpTh + priv->FailTxRateCount * priv->FailTxRateCount)) ||
-			(CurrSignalStrength > priv->LastFailTxRateSS) || priv->bTryuping) {
-			priv->TryupingCount = 0;
-			/*
-			 * When transferring from CCK to OFDM, DIG is an important issue.
-			 */
-			if (priv->CurrentOperaRate == 22)
-				bUpdateInitialGain = true;
-
-			/*
-			 * The difference in throughput between 48Mbps and 36Mbps is 8M.
-			 * So, we must be careful in this rate scale. Isaiah 2008-02-15.
-			 */
-			if (((priv->CurrentOperaRate == 72) || (priv->CurrentOperaRate == 48) || (priv->CurrentOperaRate == 36)) &&
-				(priv->FailTxRateCount > 2))
-				priv->RateAdaptivePeriod = (RATE_ADAPTIVE_TIMER_PERIOD / 2);
-
-			/* (1)To avoid upgrade frequently to the fail tx rate, add the FailTxRateCount into the threshold. */
-			/* (2)If the signal strength is increased, it may be able to upgrade. */
-
-			priv->CurrentOperaRate = GetUpgradeTxRate(dev, priv->CurrentOperaRate);
-
-			if (priv->CurrentOperaRate == 36) {
-				priv->bUpdateARFR = true;
-				write_nic_word(dev, ARFR, 0x0F8F); /* bypass 12/9/6 */
-			} else if (priv->bUpdateARFR) {
-				priv->bUpdateARFR = false;
-				write_nic_word(dev, ARFR, 0x0FFF); /* set 1M ~ 54Mbps. */
-			}
-
-			/* Update Fail Tx rate and count. */
-			if (priv->LastFailTxRate != priv->CurrentOperaRate) {
-				priv->LastFailTxRate = priv->CurrentOperaRate;
-				priv->FailTxRateCount = 0;
-				priv->LastFailTxRateSS = -200; /* Set lowest power. */
-			}
-		}
-	} else {
-		if (priv->TryupingCount > 0)
-			priv->TryupingCount--;
-	}
-
-	if (bTryDown) {
-		priv->TryDownCountLowData++;
-		priv->TryupingCount = 0;
-
-		/* Check if Tx rate can be degraded or Test trying upgrading should fallback. */
-		if (priv->TryDownCountLowData > TryDownTh || priv->bTryuping) {
-			priv->TryDownCountLowData = 0;
-			priv->bTryuping = false;
-			/* Update fail information. */
-			if (priv->LastFailTxRate == priv->CurrentOperaRate) {
-				priv->FailTxRateCount++;
-				/* Record the Tx fail rate signal strength. */
-				if (CurrSignalStrength > priv->LastFailTxRateSS)
-					priv->LastFailTxRateSS = CurrSignalStrength;
-			} else {
-				priv->LastFailTxRate = priv->CurrentOperaRate;
-				priv->FailTxRateCount = 1;
-				priv->LastFailTxRateSS = CurrSignalStrength;
-			}
-			priv->CurrentOperaRate = GetDegradeTxRate(dev, priv->CurrentOperaRate);
-
-			/* Reduce chariot training time at weak signal strength situation. SD3 ED demand. */
-			if ((CurrSignalStrength < -80) && (priv->CurrentOperaRate > 72)) {
-				priv->CurrentOperaRate = 72;
-			}
-
-			if (priv->CurrentOperaRate == 36) {
-				priv->bUpdateARFR = true;
-				write_nic_word(dev, ARFR, 0x0F8F); /* bypass 12/9/6 */
-			} else if (priv->bUpdateARFR) {
-				priv->bUpdateARFR = false;
-				write_nic_word(dev, ARFR, 0x0FFF); /* set 1M ~ 54Mbps. */
-			}
-
-			/*
-			 * When it is CCK rate, it may need to update initial gain to receive lower power packets.
-			 */
-			if (MgntIsCckRate(priv->CurrentOperaRate)) {
-				bUpdateInitialGain = true;
-			}
-		}
-	} else {
-		if (priv->TryDownCountLowData > 0)
-			priv->TryDownCountLowData--;
-	}
-
-	/*
-	 * Keep the Tx fail rate count to equal to 0x15 at most.
-	 * Reduce the fail count at least to 10 sec if tx rate is tending stable.
-	 */
-	if (priv->FailTxRateCount >= 0x15 ||
-		(!bTryUp && !bTryDown && priv->TryDownCountLowData == 0 && priv->TryupingCount && priv->FailTxRateCount > 0x6)) {
-		priv->FailTxRateCount--;
-	}
-
-
-	OfdmTxPwrIdx  = priv->chtxpwr_ofdm[priv->ieee80211->current_network.channel];
-	CckTxPwrIdx  = priv->chtxpwr[priv->ieee80211->current_network.channel];
-
-	/* Mac0x9e increase 2 level in 36M~18M situation */
-	if ((priv->CurrentOperaRate < 96) && (priv->CurrentOperaRate > 22)) {
-		u1bCck = read_nic_byte(dev, CCK_TXAGC);
-		u1bOfdm = read_nic_byte(dev, OFDM_TXAGC);
-
-		/* case 1: Never enter High power */
-		if (u1bCck == CckTxPwrIdx) {
-			if (u1bOfdm != (OfdmTxPwrIdx + 2)) {
-			priv->bEnhanceTxPwr = true;
-			u1bOfdm = ((u1bOfdm + 2) > 35) ? 35 : (u1bOfdm + 2);
-			write_nic_byte(dev, OFDM_TXAGC, u1bOfdm);
-			}
-		} else if (u1bCck < CckTxPwrIdx) {
-		/* case 2: enter high power */
-			if (!priv->bEnhanceTxPwr) {
-				priv->bEnhanceTxPwr = true;
-				u1bOfdm = ((u1bOfdm + 2) > 35) ? 35 : (u1bOfdm + 2);
-				write_nic_byte(dev, OFDM_TXAGC, u1bOfdm);
-			}
-		}
-	} else if (priv->bEnhanceTxPwr) {  /* 54/48/11/5.5/2/1 */
-		u1bCck = read_nic_byte(dev, CCK_TXAGC);
-		u1bOfdm = read_nic_byte(dev, OFDM_TXAGC);
-
-		/* case 1: Never enter High power */
-		if (u1bCck == CckTxPwrIdx) {
-			priv->bEnhanceTxPwr = false;
-			write_nic_byte(dev, OFDM_TXAGC, OfdmTxPwrIdx);
-		}
-		/* case 2: enter high power */
-		else if (u1bCck < CckTxPwrIdx) {
-			priv->bEnhanceTxPwr = false;
-			u1bOfdm = ((u1bOfdm - 2) > 0) ? (u1bOfdm - 2) : 0;
-			write_nic_byte(dev, OFDM_TXAGC, u1bOfdm);
-		}
-	}
-
-	/*
-	 * We need update initial gain when we set tx rate "from OFDM to CCK" or
-	 * "from CCK to OFDM".
-	 */
-SetInitialGain:
-	if (bUpdateInitialGain) {
-		if (MgntIsCckRate(priv->CurrentOperaRate)) { /* CCK */
-			if (priv->InitialGain > priv->RegBModeGainStage) {
-				priv->InitialGainBackUp = priv->InitialGain;
-
-				if (CurrSignalStrength < -85) /* Low power, OFDM [0x17] = 26. */
-					/* SD3 SYs suggest that CurrSignalStrength < -65, ofdm 0x17=26. */
-					priv->InitialGain = priv->RegBModeGainStage;
-
-				else if (priv->InitialGain > priv->RegBModeGainStage + 1)
-					priv->InitialGain -= 2;
-
-				else
-					priv->InitialGain--;
-
-				printk("StaRateAdaptive87SE(): update init_gain to index %d for date rate %d\n", priv->InitialGain, priv->CurrentOperaRate);
-				UpdateInitialGain(dev);
-			}
-		} else { /* OFDM */
-			if (priv->InitialGain < 4) {
-				priv->InitialGainBackUp = priv->InitialGain;
-
-				priv->InitialGain++;
-				printk("StaRateAdaptive87SE(): update init_gain to index %d for date rate %d\n", priv->InitialGain, priv->CurrentOperaRate);
-				UpdateInitialGain(dev);
-			}
-		}
-	}
-
-	/* Record the related info */
-	priv->LastRetryRate = CurrRetryRate;
-	priv->LastTxThroughput = TxThroughput;
-	priv->ieee80211->rate = priv->CurrentOperaRate * 5;
-}
-
-void rtl8180_rate_adapter(struct work_struct *work)
-{
-	struct delayed_work *dwork = to_delayed_work(work);
-	struct ieee80211_device *ieee = container_of(dwork, struct ieee80211_device, rate_adapter_wq);
-	struct net_device *dev = ieee->dev;
-	StaRateAdaptive87SE(dev);
-}
-void timer_rate_adaptive(unsigned long data)
-{
-	struct r8180_priv *priv = ieee80211_priv((struct net_device *)data);
-	if (!priv->up) {
-		return;
-	}
-	if ((priv->ieee80211->iw_mode != IW_MODE_MASTER)
-			&& (priv->ieee80211->state == IEEE80211_LINKED) &&
-			(priv->ForcedDataRate == 0)) {
-		queue_work(priv->ieee80211->wq, (void *)&priv->ieee80211->rate_adapter_wq);
-	}
-	priv->rateadapter_timer.expires = jiffies + MSECS(priv->RateAdaptivePeriod);
-	add_timer(&priv->rateadapter_timer);
-}
-
-void SwAntennaDiversityRxOk8185(struct net_device *dev, u8 SignalStrength)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
-	priv->AdRxOkCnt++;
-
-	if (priv->AdRxSignalStrength != -1) {
-		priv->AdRxSignalStrength = ((priv->AdRxSignalStrength * 7) + (SignalStrength * 3)) / 10;
-	} else { /* Initialization case. */
-		priv->AdRxSignalStrength = SignalStrength;
-	}
-
-	if (priv->LastRxPktAntenna) /* Main antenna. */
-		priv->AdMainAntennaRxOkCnt++;
-	else	 /* Aux antenna. */
-		priv->AdAuxAntennaRxOkCnt++;
-}
- /*	Change Antenna Switch. */
-bool SetAntenna8185(struct net_device *dev, u8 u1bAntennaIndex)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	bool bAntennaSwitched = false;
-
-	switch (u1bAntennaIndex) {
-	case 0:
-		/* Mac register, main antenna */
-		write_nic_byte(dev, ANTSEL, 0x03);
-		/* base band */
-		write_phy_cck(dev, 0x11, 0x9b); /* Config CCK RX antenna. */
-		write_phy_ofdm(dev, 0x0d, 0x5c); /* Config OFDM RX antenna. */
-
-		bAntennaSwitched = true;
-		break;
-
-	case 1:
-		/* Mac register, aux antenna */
-		write_nic_byte(dev, ANTSEL, 0x00);
-		/* base band */
-		write_phy_cck(dev, 0x11, 0xbb); /* Config CCK RX antenna. */
-		write_phy_ofdm(dev, 0x0d, 0x54); /* Config OFDM RX antenna. */
-
-		bAntennaSwitched = true;
-
-		break;
-
-	default:
-		printk("SetAntenna8185: unknown u1bAntennaIndex(%d)\n", u1bAntennaIndex);
-		break;
-	}
-
-	if (bAntennaSwitched)
-		priv->CurrAntennaIndex = u1bAntennaIndex;
-
-	return bAntennaSwitched;
-}
- /*	Toggle Antenna switch. */
-bool SwitchAntenna(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
-	bool		bResult;
-
-	if (priv->CurrAntennaIndex == 0) {
-		bResult = SetAntenna8185(dev, 1);
-	} else {
-		bResult = SetAntenna8185(dev, 0);
-	}
-
-	return bResult;
-}
-/*
- * Engine of SW Antenna Diversity mechanism.
- * Since 8187 has no Tx part information,
- * this implementation is only dependend on Rx part information.
- */
-void SwAntennaDiversity(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	bool   bSwCheckSS = false;
-	if (bSwCheckSS) {
-		priv->AdTickCount++;
-
-		printk("(1) AdTickCount: %d, AdCheckPeriod: %d\n",
-			priv->AdTickCount, priv->AdCheckPeriod);
-		printk("(2) AdRxSignalStrength: %ld, AdRxSsThreshold: %ld\n",
-			priv->AdRxSignalStrength, priv->AdRxSsThreshold);
-	}
-
-	/* Case 1. No Link. */
-	if (priv->ieee80211->state != IEEE80211_LINKED) {
-		priv->bAdSwitchedChecking = false;
-		/* I switch antenna here to prevent any one of antenna is broken before link established, 2006.04.18, by rcnjko.. */
-		SwitchAntenna(dev);
-
-	  /* Case 2. Linked but no packet receive.d */
-	} else if (priv->AdRxOkCnt == 0) {
-		priv->bAdSwitchedChecking = false;
-		SwitchAntenna(dev);
-
-	  /* Case 3. Evaluate last antenna switch action and undo it if necessary. */
-	} else if (priv->bAdSwitchedChecking == true) {
-		priv->bAdSwitchedChecking = false;
-
-		/* Adjust Rx signal strength threshold. */
-		priv->AdRxSsThreshold = (priv->AdRxSignalStrength + priv->AdRxSsBeforeSwitched) / 2;
-
-		priv->AdRxSsThreshold = (priv->AdRxSsThreshold > priv->AdMaxRxSsThreshold) ?
-					priv->AdMaxRxSsThreshold : priv->AdRxSsThreshold;
-		if (priv->AdRxSignalStrength < priv->AdRxSsBeforeSwitched) {
-		/* Rx signal strength is not improved after we swtiched antenna. => Swich back. */
-			/* Increase Antenna Diversity checking period due to bad decision. */
-			priv->AdCheckPeriod *= 2;
-			/* Increase Antenna Diversity checking period. */
-			if (priv->AdCheckPeriod > priv->AdMaxCheckPeriod)
-				priv->AdCheckPeriod = priv->AdMaxCheckPeriod;
-
-			/* Wrong decision => switch back. */
-			SwitchAntenna(dev);
-		} else {
-		/* Rx Signal Strength is improved. */
-
-			/* Reset Antenna Diversity checking period to its min value. */
-			priv->AdCheckPeriod = priv->AdMinCheckPeriod;
-		}
-
-	}
-	/* Case 4. Evaluate if we shall switch antenna now. */
-	/* Cause Table Speed is very fast in TRC Dell Lab, we check it every time. */
-	else {
-		priv->AdTickCount = 0;
-
-		/*
-		 * <Roger_Notes> We evaluate RxOk counts for each antenna first and than
-		 * evaluate signal strength.
-		 * The following operation can overcome the disability of CCA on both two antennas
-		 * When signal strength was extremely low or high.
-		 * 2008.01.30.
-		 */
-
-		/*
-		 * Evaluate RxOk count from each antenna if we shall switch default antenna now.
-		 */
-		if ((priv->AdMainAntennaRxOkCnt < priv->AdAuxAntennaRxOkCnt)
-			&& (priv->CurrAntennaIndex == 0)) {
-		/* We set Main antenna as default but RxOk count was less than Aux ones. */
-
-			/* Switch to Aux antenna. */
-			SwitchAntenna(dev);
-			priv->bHWAdSwitched = true;
-		} else if ((priv->AdAuxAntennaRxOkCnt < priv->AdMainAntennaRxOkCnt)
-			&& (priv->CurrAntennaIndex == 1)) {
-		/* We set Aux antenna as default but RxOk count was less than Main ones. */
-
-			/* Switch to Main antenna. */
-			SwitchAntenna(dev);
-			priv->bHWAdSwitched = true;
-		} else {
-		/* Default antenna is better. */
-
-			/* Still need to check current signal strength. */
-			priv->bHWAdSwitched = false;
-		}
-		/*
-		 * <Roger_Notes> We evaluate Rx signal strength ONLY when default antenna
-		 * didn't change by HW evaluation.
-		 * 2008.02.27.
-		 *
-		 * [TRC Dell Lab] SignalStrength is inaccuracy. Isaiah 2008-03-05
-		 * For example, Throughput of aux is better than main antenna(about 10M v.s 2M),
-		 * but AdRxSignalStrength is less than main.
-		 * Our guess is that main antenna have lower throughput and get many change
-		 * to receive more CCK packets(ex.Beacon) which have stronger SignalStrength.
-		 */
-		if ((!priv->bHWAdSwitched) && (bSwCheckSS)) {
-			/* Evaluate Rx signal strength if we shall switch antenna now. */
-			if (priv->AdRxSignalStrength < priv->AdRxSsThreshold) {
-			/* Rx signal strength is weak => Switch Antenna. */
-				priv->AdRxSsBeforeSwitched = priv->AdRxSignalStrength;
-				priv->bAdSwitchedChecking = true;
-
-				SwitchAntenna(dev);
-			} else {
-			/* Rx signal strength is OK. */
-				priv->bAdSwitchedChecking = false;
-				/* Increase Rx signal strength threshold if necessary. */
-				if ((priv->AdRxSignalStrength > (priv->AdRxSsThreshold + 10)) && /* Signal is much stronger than current threshold */
-					priv->AdRxSsThreshold <= priv->AdMaxRxSsThreshold) { /* Current threhold is not yet reach upper limit. */
-
-					priv->AdRxSsThreshold = (priv->AdRxSsThreshold + priv->AdRxSignalStrength) / 2;
-					priv->AdRxSsThreshold = (priv->AdRxSsThreshold > priv->AdMaxRxSsThreshold) ?
-								priv->AdMaxRxSsThreshold : priv->AdRxSsThreshold;/* +by amy 080312 */
-				}
-
-				/* Reduce Antenna Diversity checking period if possible. */
-				if (priv->AdCheckPeriod > priv->AdMinCheckPeriod)
-					priv->AdCheckPeriod /= 2;
-			}
-		}
-	}
-	/* Reset antenna diversity Rx related statistics. */
-	priv->AdRxOkCnt = 0;
-	priv->AdMainAntennaRxOkCnt = 0;
-	priv->AdAuxAntennaRxOkCnt = 0;
-}
-
- /*	Return TRUE if we shall perform Tx Power Tracking Mechanism, FALSE otherwise. */
-bool CheckTxPwrTracking(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
-	if (!priv->bTxPowerTrack)
-		return false;
-
-	/* if 87SE is in High Power , don't do Tx Power Tracking. asked by SD3 ED. 2008-08-08 Isaiah */
-	if (priv->bToUpdateTxPwr)
-		return false;
-
-	return true;
-}
-
-
- /*	Timer callback function of SW Antenna Diversity. */
-void SwAntennaDiversityTimerCallback(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	enum rt_rf_power_state rtState;
-
-	 /* We do NOT need to switch antenna while RF is off. */
-	rtState = priv->eRFPowerState;
-	do {
-		if (rtState == RF_OFF) {
-			break;
-		} else if (rtState == RF_SLEEP) {
-			/* Don't access BB/RF under Disable PLL situation. */
-			break;
-		}
-		SwAntennaDiversity(dev);
-
-	} while (false);
-
-	if (priv->up) {
-		priv->SwAntennaDiversityTimer.expires = jiffies + MSECS(ANTENNA_DIVERSITY_TIMER_PERIOD);
-		add_timer(&priv->SwAntennaDiversityTimer);
-	}
-}
-
diff --git a/drivers/staging/rtl8187se/r8180_dm.h b/drivers/staging/rtl8187se/r8180_dm.h
deleted file mode 100644
index cb4046f346ef..000000000000
--- a/drivers/staging/rtl8187se/r8180_dm.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef R8180_DM_H
-#define R8180_DM_H
-
-#include "r8180.h"
-/* #include "r8180_hw.h"	*/
-/* #include "r8180_93cx6.h"	*/
-void SwAntennaDiversityRxOk8185(struct net_device *dev, u8 SignalStrength);
-bool SetAntenna8185(struct net_device *dev, u8 u1bAntennaIndex);
-bool SwitchAntenna(struct net_device *dev);
-void SwAntennaDiversity(struct net_device *dev);
-void SwAntennaDiversityTimerCallback(struct net_device *dev);
-bool CheckDig(struct net_device *dev);
-bool CheckHighPower(struct net_device *dev);
-void rtl8180_hw_dig_wq(struct work_struct *work);
-void rtl8180_tx_pw_wq(struct work_struct *work);
-void rtl8180_rate_adapter(struct work_struct *work);
-void TxPwrTracking87SE(struct net_device *dev);
-bool CheckTxPwrTracking(struct net_device *dev);
-void rtl8180_rate_adapter(struct work_struct *work);
-void timer_rate_adaptive(unsigned long data);
-
-
-#endif
diff --git a/drivers/staging/rtl8187se/r8180_hw.h b/drivers/staging/rtl8187se/r8180_hw.h
deleted file mode 100644
index e59d74f8ecfc..000000000000
--- a/drivers/staging/rtl8187se/r8180_hw.h
+++ /dev/null
@@ -1,588 +0,0 @@
-/*
-	This is part of rtl8180 OpenSource driver.
-	Copyright (C) Andrea Merello 2004-2005  <andrea.merello@gmail.com>
-	Released under the terms of GPL (General Public Licence)
-
-	Parts of this driver are based on the GPL part of the
-	official Realtek driver.
-	Parts of this driver are based on the rtl8180 driver skeleton
-	from Patric Schenke & Andres Salomon.
-	Parts of this driver are based on the Intel Pro Wireless
-	2100 GPL driver.
-
-	We want to tanks the Authors of those projects
-	and the Ndiswrapper project Authors.
-*/
-
-/* Mariusz Matuszek added full registers definition with Realtek's name */
-
-/* this file contains register definitions for the rtl8180 MAC controller */
-#ifndef R8180_HW
-#define R8180_HW
-
-
-#define BIT0	0x00000001
-#define BIT1	0x00000002
-#define BIT2	0x00000004
-#define BIT3	0x00000008
-#define BIT4	0x00000010
-#define BIT5	0x00000020
-#define BIT6	0x00000040
-#define BIT7	0x00000080
-#define BIT9	0x00000200
-#define BIT11	0x00000800
-#define BIT13	0x00002000
-#define BIT15	0x00008000
-#define BIT20	0x00100000
-#define BIT21	0x00200000
-#define BIT22	0x00400000
-#define BIT23	0x00800000
-#define BIT24	0x01000000
-#define BIT25	0x02000000
-#define BIT26	0x04000000
-#define BIT27	0x08000000
-#define BIT28	0x10000000
-#define BIT29	0x20000000
-#define BIT30	0x40000000
-#define BIT31	0x80000000
-
-#define MAX_SLEEP_TIME (10000)
-#define MIN_SLEEP_TIME (50)
-
-#define BB_HOST_BANG_EN (1<<2)
-#define BB_HOST_BANG_CLK (1<<1)
-
-#define MAC0 0
-#define MAC4 4
-
-#define CMD 0x37
-#define CMD_RST_SHIFT 4
-#define CMD_RX_ENABLE_SHIFT 3
-#define CMD_TX_ENABLE_SHIFT 2
-
-#define EPROM_CMD 0x50
-#define EPROM_CMD_RESERVED_MASK ((1<<5)|(1<<4))
-#define EPROM_CMD_OPERATING_MODE_SHIFT 6
-#define EPROM_CMD_OPERATING_MODE_MASK ((1<<7)|(1<<6))
-#define EPROM_CMD_CONFIG 0x3
-#define EPROM_CMD_NORMAL 0
-#define EPROM_CMD_LOAD 1
-#define EPROM_CMD_PROGRAM 2
-#define EPROM_CS_SHIFT 3
-#define EPROM_CK_SHIFT 2
-#define EPROM_W_SHIFT 1
-#define EPROM_R_SHIFT 0
-#define CONFIG2_DMA_POLLING_MODE_SHIFT 3
-
-#define INTA_TXOVERFLOW (1<<15)
-#define INTA_TIMEOUT (1<<14)
-#define INTA_HIPRIORITYDESCERR (1<<9)
-#define INTA_HIPRIORITYDESCOK (1<<8)
-#define INTA_NORMPRIORITYDESCERR (1<<7)
-#define INTA_NORMPRIORITYDESCOK (1<<6)
-#define INTA_RXOVERFLOW (1<<5)
-#define INTA_RXDESCERR (1<<4)
-#define INTA_LOWPRIORITYDESCERR (1<<3)
-#define INTA_LOWPRIORITYDESCOK (1<<2)
-#define INTA_RXOK (1)
-#define INTA_MASK 0x3c
-
-#define RXRING_ADDR 0xe4 /* page 0 */
-#define PGSELECT 0x5e
-#define PGSELECT_PG_SHIFT 0
-#define RX_CONF 0x44
-#define MAC_FILTER_MASK ((1<<0) | (1<<1) | (1<<2) | (1<<3) | (1<<5) | \
-(1<<12) | (1<<18) | (1<<19) | (1<<20) | (1<<21) | (1<<22) | (1<<23))
-#define RX_CHECK_BSSID_SHIFT 23
-#define ACCEPT_PWR_FRAME_SHIFT 22
-#define ACCEPT_MNG_FRAME_SHIFT 20
-#define ACCEPT_CTL_FRAME_SHIFT 19
-#define ACCEPT_DATA_FRAME_SHIFT 18
-#define ACCEPT_ICVERR_FRAME_SHIFT 12
-#define ACCEPT_CRCERR_FRAME_SHIFT 5
-#define ACCEPT_BCAST_FRAME_SHIFT 3
-#define ACCEPT_MCAST_FRAME_SHIFT 2
-#define ACCEPT_ALLMAC_FRAME_SHIFT 0
-#define ACCEPT_NICMAC_FRAME_SHIFT 1
-
-#define RX_FIFO_THRESHOLD_MASK ((1<<13) | (1<<14) | (1<<15))
-#define RX_FIFO_THRESHOLD_SHIFT 13
-#define RX_FIFO_THRESHOLD_NONE 7
-#define RX_AUTORESETPHY_SHIFT 28
-
-#define TX_CONF 0x40
-#define TX_CONF_HEADER_AUTOICREMENT_SHIFT 30
-#define TX_LOOPBACK_SHIFT 17
-#define TX_LOOPBACK_NONE 0
-#define TX_LOOPBACK_CONTINUE 3
-#define TX_LOOPBACK_MASK ((1<<17)|(1<<18))
-#define TX_DPRETRY_SHIFT 0
-#define R8180_MAX_RETRY 255
-#define TX_RTSRETRY_SHIFT 8
-#define TX_NOICV_SHIFT 19
-#define TX_NOCRC_SHIFT 16
-#define TX_DMA_POLLING 0xd9
-#define TX_DMA_POLLING_BEACON_SHIFT 7
-#define TX_DMA_POLLING_HIPRIORITY_SHIFT 6
-#define TX_DMA_POLLING_NORMPRIORITY_SHIFT 5
-#define TX_DMA_POLLING_LOWPRIORITY_SHIFT 4
-#define TX_MANAGEPRIORITY_RING_ADDR 0x0C
-#define TX_BKPRIORITY_RING_ADDR 0x10
-#define TX_BEPRIORITY_RING_ADDR 0x14
-#define TX_VIPRIORITY_RING_ADDR 0x20
-#define TX_VOPRIORITY_RING_ADDR 0x24
-#define TX_HIGHPRIORITY_RING_ADDR 0x28
-#define MAX_RX_DMA_MASK ((1<<8) | (1<<9) | (1<<10))
-#define MAX_RX_DMA_2048 7
-#define MAX_RX_DMA_1024	6
-#define MAX_RX_DMA_SHIFT 10
-#define INT_TIMEOUT 0x48
-#define CONFIG3_CLKRUN_SHIFT 2
-#define CONFIG3_ANAPARAM_W_SHIFT 6
-#define ANAPARAM 0x54
-#define BEACON_INTERVAL 0x70
-#define BEACON_INTERVAL_MASK ((1<<0)|(1<<1)|(1<<2)|(1<<3)|(1<<4)|(1<<5)| \
-(1<<6)|(1<<7)|(1<<8)|(1<<9))
-#define ATIM_MASK ((1<<0)|(1<<1)|(1<<2)|(1<<3)|(1<<4)|(1<<5)|(1<<6)|(1<<7)| \
-(1<<8)|(1<<9))
-#define ATIM 0x72
-#define EPROM_CS_SHIFT 3
-#define EPROM_CK_SHIFT 2
-#define PHY_ADR 0x7c
-#define SECURITY 0x5f /* 1209 this is sth wrong */
-#define SECURITY_WEP_TX_ENABLE_SHIFT 1
-#define SECURITY_WEP_RX_ENABLE_SHIFT 0
-#define SECURITY_ENCRYP_104 1
-#define SECURITY_ENCRYP_SHIFT 4
-#define SECURITY_ENCRYP_MASK ((1<<4)|(1<<5))
-#define KEY0 0x90  /* 1209 this is sth wrong */
-#define CONFIG2_ANTENNA_SHIFT 6
-#define TX_BEACON_RING_ADDR 0x4c
-#define CONFIG0_WEP40_SHIFT 7
-#define CONFIG0_WEP104_SHIFT 6
-#define AGCRESET_SHIFT 5
-
-
-
-/*
- * Operational registers offsets in PCI (I/O) space.
- * RealTek names are used.
- */
-
-#define TSFTR 0x0018
-
-#define TLPDA 0x0020
-
-#define BSSID 0x002E
-
-#define CR 0x0037
-
-#define RF_SW_CONFIG	        0x8			/* store data which is transmitted to RF for driver	*/
-#define RF_SW_CFG_SI		BIT1
-#define EIFS			0x2D			/* Extended InterFrame Space Timer, in unit of 4 us.	*/
-
-#define BRSR			0x34			/* Basic rate set										*/
-
-#define IMR 0x006C
-#define ISR 0x003C
-
-#define TCR 0x0040
-
-#define RCR 0x0044
-
-#define TimerInt 0x0048
-
-#define CR9346 0x0050
-
-#define CONFIG0 0x0051
-#define CONFIG2 0x0053
-
-#define MSR 0x0058
-
-#define CONFIG3 0x0059
-#define CONFIG4 0x005A
-	/* SD3 szuyitasi: Mac0x57= CC -> B0 Mac0x60= D1 -> C6	*/
-	/* Mac0x60 = 0x000004C6 power save parameters			*/
-	#define ANAPARM_ASIC_ON    0xB0054D00
-	#define ANAPARM2_ASIC_ON  0x000004C6
-
-	#define ANAPARM_ON ANAPARM_ASIC_ON
-	#define ANAPARM2_ON ANAPARM2_ASIC_ON
-
-#define TESTR 0x005B
-
-#define PSR 0x005E
-
-#define BcnItv 0x0070
-
-#define AtimWnd 0x0072
-
-#define BintrItv 0x0074
-
-#define PhyAddr 0x007C
-#define PhyDataR 0x007E
-
-/* following are for rtl8185 */
-#define RFPinsOutput 0x80
-#define RFPinsEnable 0x82
-#define RF_TIMING 0x8c
-#define RFPinsSelect 0x84
-#define ANAPARAM2 0x60
-#define RF_PARA 0x88
-#define RFPinsInput 0x86
-#define GP_ENABLE 0x90
-#define GPIO 0x91
-#define SW_CONTROL_GPIO 0x400
-#define TX_ANTENNA 0x9f
-#define TX_GAIN_OFDM 0x9e
-#define TX_GAIN_CCK 0x9d
-#define WPA_CONFIG 0xb0
-#define TX_AGC_CTL 0x9c
-#define TX_AGC_CTL_PERPACKET_GAIN_SHIFT 0
-#define TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT 1
-#define TX_AGC_CTL_FEEDBACK_ANT 2
-#define RESP_RATE 0x34
-#define SIFS 0xb4
-#define DIFS 0xb5
-
-#define SLOT 0xb6
-#define CW_CONF 0xbc
-#define CW_CONF_PERPACKET_RETRY_SHIFT 1
-#define CW_CONF_PERPACKET_CW_SHIFT 0
-#define CW_VAL 0xbd
-#define MAX_RESP_RATE_SHIFT 4
-#define MIN_RESP_RATE_SHIFT 0
-#define RATE_FALLBACK 0xbe
-
-#define CONFIG5 0x00D8
-
-#define PHYPR			0xDA			/* 0xDA - 0x0B PHY Parameter Register.	*/
-
-#define FEMR			0x1D4	/* Function Event Mask register	*/
-
-#define FFER 0x00FC
-#define FFER_END 0x00FF
-
-
-
-/*
- * Bitmasks for specific register functions.
- * Names are derived from the register name and function name.
- *
- * <REGISTER>_<FUNCTION>[<bit>]
- *
- * this leads to some awkward names...
- */
-
-#define BRSR_BPLCP  ((1 << 8))
-#define BRSR_MBR    ((1 << 1)|(1 << 0))
-#define BRSR_MBR_8185 ((1 << 11)|(1 << 10)|(1 << 9)|(1 << 8)|(1 << 7)|(1 << 6)|(1 << 5)|(1 << 4)|(1 << 3)|(1 << 2)|(1 << 1)|(1 << 0))
-#define BRSR_MBR0   ((1 << 0))
-#define BRSR_MBR1   ((1 << 1))
-
-#define CR_RST      ((1 << 4))
-#define CR_RE       ((1 << 3))
-#define CR_TE       ((1 << 2))
-#define CR_MulRW    ((1 << 0))
-
-#define IMR_Dot11hInt	((1 << 25))			/*802.11h Measurement Interrupt					*/
-#define IMR_BcnDmaInt	((1 << 24))			/*Beacon DMA Interrupt */ /*What differenct between BcnDmaInt and BcnInt???	*/
-#define IMR_WakeInt		((1 << 23))			/*Wake Up Interrupt								*/
-#define IMR_TXFOVW		((1 << 22))			/*Tx FIFO Overflow Interrupt					*/
-#define IMR_TimeOut1	((1 << 21))			/*Time Out Interrupt 1							*/
-#define IMR_BcnInt		((1 << 20))			/*Beacon Time out Interrupt						*/
-#define IMR_ATIMInt		((1 << 19))			/*ATIM Time Out Interrupt						*/
-#define IMR_TBDER		((1 << 18))			/*Tx Beacon Descriptor Error Interrupt			*/
-#define IMR_TBDOK		((1 << 17))			/*Tx Beacon Descriptor OK Interrupt				*/
-#define IMR_THPDER		((1 << 16))			/*Tx High Priority Descriptor Error Interrupt	*/
-#define IMR_THPDOK		((1 << 15))			/*Tx High Priority Descriptor OK Interrupt		*/
-#define IMR_TVODER		((1 << 14))			/*Tx AC_VO Descriptor Error Interrupt			*/
-#define IMR_TVODOK		((1 << 13))			/*Tx AC_VO Descriptor OK Interrupt				*/
-#define IMR_FOVW		((1 << 12))			/*Rx FIFO Overflow Interrupt					*/
-#define IMR_RDU			((1 << 11))			/*Rx Descriptor Unavailable Interrupt			*/
-#define IMR_TVIDER		((1 << 10))			/*Tx AC_VI Descriptor Error Interrupt			*/
-#define IMR_TVIDOK		((1 << 9))			/*Tx AC_VI Descriptor OK Interrupt				*/
-#define IMR_RER			((1 << 8))			/*Rx Error Interrupt							*/
-#define IMR_ROK			((1 << 7))			/*Receive OK Interrupt							*/
-#define IMR_TBEDER		((1 << 6))			/*Tx AC_BE Descriptor Error Interrupt			*/
-#define IMR_TBEDOK		((1 << 5))			/*Tx AC_BE Descriptor OK Interrupt				*/
-#define IMR_TBKDER		((1 << 4))			/*Tx AC_BK Descriptor Error Interrupt			*/
-#define IMR_TBKDOK		((1 << 3))			/*Tx AC_BK Descriptor OK Interrupt				*/
-#define IMR_RQoSOK		((1 << 2))			/*Rx QoS OK Interrupt							*/
-#define IMR_TimeOut2	((1 << 1))			/*Time Out Interrupt 2							*/
-#define IMR_TimeOut3	((1 << 0))			/*Time Out Interrupt 3							*/
-#define IMR_TMGDOK      ((1 << 30))
-#define ISR_Dot11hInt	((1 << 25))			/*802.11h Measurement Interrupt					*/
-#define ISR_BcnDmaInt	((1 << 24))			/*Beacon DMA Interrupt	*/ /*What differenct between BcnDmaInt and BcnInt???	*/
-#define ISR_WakeInt		((1 << 23))			/*Wake Up Interrupt								*/
-#define ISR_TXFOVW		((1 << 22))			/*Tx FIFO Overflow Interrupt					*/
-#define ISR_TimeOut1	((1 << 21))			/*Time Out Interrupt 1							*/
-#define ISR_BcnInt		((1 << 20))			/*Beacon Time out Interrupt						*/
-#define ISR_ATIMInt		((1 << 19))			/*ATIM Time Out Interrupt						*/
-#define ISR_TBDER		((1 << 18))			/*Tx Beacon Descriptor Error Interrupt			*/
-#define ISR_TBDOK		((1 << 17))			/*Tx Beacon Descriptor OK Interrupt				*/
-#define ISR_THPDER		((1 << 16))			/*Tx High Priority Descriptor Error Interrupt	*/
-#define ISR_THPDOK		((1 << 15))			/*Tx High Priority Descriptor OK Interrupt		*/
-#define ISR_TVODER		((1 << 14))			/*Tx AC_VO Descriptor Error Interrupt			*/
-#define ISR_TVODOK		((1 << 13))			/*Tx AC_VO Descriptor OK Interrupt				*/
-#define ISR_FOVW		((1 << 12))			/*Rx FIFO Overflow Interrupt					*/
-#define ISR_RDU			((1 << 11))			/*Rx Descriptor Unavailable Interrupt			*/
-#define ISR_TVIDER		((1 << 10))			/*Tx AC_VI Descriptor Error Interrupt			*/
-#define ISR_TVIDOK		((1 << 9))			/*Tx AC_VI Descriptor OK Interrupt				*/
-#define ISR_RER			((1 << 8))			/*Rx Error Interrupt							*/
-#define ISR_ROK			((1 << 7))			/*Receive OK Interrupt							*/
-#define ISR_TBEDER		((1 << 6))			/*Tx AC_BE Descriptor Error Interrupt			*/
-#define ISR_TBEDOK		((1 << 5))			/*Tx AC_BE Descriptor OK Interrupt				*/
-#define ISR_TBKDER		((1 << 4))			/*Tx AC_BK Descriptor Error Interrupt			*/
-#define ISR_TBKDOK		((1 << 3))			/*Tx AC_BK Descriptor OK Interrupt				*/
-#define ISR_RQoSOK		((1 << 2))			/*Rx QoS OK Interrupt							*/
-#define ISR_TimeOut2	((1 << 1))			/*Time Out Interrupt 2							*/
-#define ISR_TimeOut3	((1 << 0))			/*Time Out Interrupt 3							*/
-
-/* these definition is used for Tx/Rx test temporarily */
-#define ISR_TLPDER  ISR_TVIDER
-#define ISR_TLPDOK  ISR_TVIDOK
-#define ISR_TNPDER  ISR_TVODER
-#define ISR_TNPDOK  ISR_TVODOK
-#define ISR_TimeOut ISR_TimeOut1
-#define ISR_RXFOVW ISR_FOVW
-
-
-#define HW_VERID_R8180_F 3
-#define HW_VERID_R8180_ABCD 2
-#define HW_VERID_R8185_ABC 4
-#define HW_VERID_R8185_D 5
-#define HW_VERID_R8185B_B 6
-
-#define TCR_CWMIN   ((1 << 31))
-#define TCR_SWSEQ   ((1 << 30))
-#define TCR_HWVERID_MASK ((1 << 27)|(1 << 26)|(1 << 25))
-#define TCR_HWVERID_SHIFT 25
-#define TCR_SAT     ((1 << 24))
-#define TCR_PLCP_LEN TCR_SAT /* rtl8180 */
-#define TCR_MXDMA_MASK   ((1 << 23)|(1 << 22)|(1 << 21))
-#define TCR_MXDMA_1024 6
-#define TCR_MXDMA_2048 7
-#define TCR_MXDMA_SHIFT  21
-#define TCR_DISCW   ((1 << 20))
-#define TCR_ICV     ((1 << 19))
-#define TCR_LBK     ((1 << 18)|(1 << 17))
-#define TCR_LBK1    ((1 << 18))
-#define TCR_LBK0    ((1 << 17))
-#define TCR_CRC     ((1 << 16))
-#define TCR_DPRETRY_MASK   ((1 << 15)|(1 << 14)|(1 << 13)|(1 << 12)|(1 << 11)|(1 << 10)|(1 << 9)|(1 << 8))
-#define TCR_RTSRETRY_MASK   ((1 << 0)|(1 << 1)|(1 << 2)|(1 << 3)|(1 << 4)|(1 << 5)|(1 << 6)|(1 << 7))
-#define TCR_PROBE_NOTIMESTAMP_SHIFT 29 /* rtl8185 */
-
-#define RCR_ONLYERLPKT ((1 << 31))
-#define RCR_CS_SHIFT   29
-#define RCR_CS_MASK    ((1 << 30) | (1 << 29))
-#define RCR_ENMARP     ((1 << 28))
-#define RCR_CBSSID     ((1 << 23))
-#define RCR_APWRMGT    ((1 << 22))
-#define RCR_ADD3       ((1 << 21))
-#define RCR_AMF        ((1 << 20))
-#define RCR_ACF        ((1 << 19))
-#define RCR_ADF        ((1 << 18))
-#define RCR_RXFTH      ((1 << 15)|(1 << 14)|(1 << 13))
-#define RCR_RXFTH2     ((1 << 15))
-#define RCR_RXFTH1     ((1 << 14))
-#define RCR_RXFTH0     ((1 << 13))
-#define RCR_AICV       ((1 << 12))
-#define RCR_MXDMA      ((1 << 10)|(1 << 9)|(1 << 8))
-#define RCR_MXDMA2     ((1 << 10))
-#define RCR_MXDMA1     ((1 << 9))
-#define RCR_MXDMA0     ((1 << 8))
-#define RCR_9356SEL    ((1 << 6))
-#define RCR_ACRC32     ((1 << 5))
-#define RCR_AB         ((1 << 3))
-#define RCR_AM         ((1 << 2))
-#define RCR_APM        ((1 << 1))
-#define RCR_AAP        ((1 << 0))
-
-#define CR9346_EEM     ((1 << 7)|(1 << 6))
-#define CR9346_EEM1    ((1 << 7))
-#define CR9346_EEM0    ((1 << 6))
-#define CR9346_EECS    ((1 << 3))
-#define CR9346_EESK    ((1 << 2))
-#define CR9346_EED1    ((1 << 1))
-#define CR9346_EED0    ((1 << 0))
-
-#define CONFIG3_PARM_En    ((1 << 6))
-#define CONFIG3_FuncRegEn  ((1 << 1))
-
-#define CONFIG4_PWRMGT     ((1 << 5))
-
-#define MSR_LINK_MASK      ((1 << 2)|(1 << 3))
-#define MSR_LINK_MANAGED   2
-#define MSR_LINK_NONE      0
-#define MSR_LINK_SHIFT     2
-#define MSR_LINK_ADHOC     1
-#define MSR_LINK_MASTER    3
-
-#define BcnItv_BcnItv      (0x01FF)
-
-#define AtimWnd_AtimWnd    (0x01FF)
-
-#define BintrItv_BintrItv  (0x01FF)
-
-#define FEMR_INTR    ((1 << 15))
-#define FEMR_WKUP    ((1 << 14))
-#define FEMR_GWAKE   ((1 << 4))
-
-#define FFER_INTR    ((1 << 15))
-#define FFER_GWAKE   ((1 << 4))
-
-/* Three wire mode.					*/
-#define SW_THREE_WIRE			0
-#define HW_THREE_WIRE			2
-/* RTL8187S by amy					*/
-#define HW_THREE_WIRE_PI		5
-#define HW_THREE_WIRE_SI		6
-/* by amy							*/
-#define TCR_LRL_OFFSET		0
-#define TCR_SRL_OFFSET		8
-#define TCR_MXDMA_OFFSET	21
-#define TCR_DISReqQsize_OFFSET		28
-#define TCR_DurProcMode_OFFSET		30
-
-#define RCR_MXDMA_OFFSET				8
-#define RCR_FIFO_OFFSET					13
-
-#define AckTimeOutReg	0x79		/* ACK timeout register, in unit of 4 us. */
-
-#define RFTiming			0x8C
-
-#define TPPollStop		0x93
-
-#define TXAGC_CTL		0x9C			/*< RJ_TODO_8185B> TX_AGC_CONTROL (0x9C seems be removed at 8185B, see p37). */
-#define CCK_TXAGC		0x9D
-#define OFDM_TXAGC		0x9E
-#define ANTSEL			0x9F
-
-#define ACM_CONTROL             0x00BF      /* ACM Control Registe */
-
-#define	IntMig			0xE2			/* Interrupt Migration (0xE2 ~ 0xE3)	*/
-
-#define TID_AC_MAP		0xE8			/* TID to AC Mapping Register			*/
-
-#define ANAPARAM3		0xEE			/* <RJ_TODO_8185B> How to use it?		*/
-
-#define AC_VO_PARAM		0xF0			/* AC_VO Parameters Record				*/
-#define AC_VI_PARAM		0xF4			/* AC_VI Parameters Record				*/
-#define AC_BE_PARAM		0xF8			/* AC_BE Parameters Record				*/
-#define AC_BK_PARAM		0xFC			/* AC_BK Parameters Record				*/
-
-#define GPIOCtrl			0x16B			/*GPIO Control Register.			*/
-#define ARFR			0x1E0	/* Auto Rate Fallback Register (0x1e0 ~ 0x1e2)	*/
-
-#define RFSW_CTRL			0x272	/* 0x272-0x273.								*/
-#define SW_3W_DB0			0x274	/* Software 3-wire data buffer bit 31~0.		*/
-#define SW_3W_DB1			0x278	/* Software 3-wire data buffer bit 63~32.	*/
-#define SW_3W_CMD0			0x27C	/* Software 3-wire Control/Status Register.	*/
-#define SW_3W_CMD1			0x27D	/* Software 3-wire Control/Status Register.	*/
-
-#define PI_DATA_READ		0X360	/* 0x360 - 0x361  Parallel Interface Data Register.	*/
-#define SI_DATA_READ		0x362	/* 0x362 - 0x363  Serial Interface Data Register.	*/
-
-/*
-----------------------------------------------------------------------------
-		8185B TPPollStop bits					(offset 0x93, 1 byte)
-----------------------------------------------------------------------------
-*/
-#define TPPOLLSTOP_BQ			(0x01 << 7)
-#define TPPOLLSTOP_AC_VIQ		(0x01 << 4)
-
-#define MSR_LINK_ENEDCA	   (1<<4)
-
-/*
-----------------------------------------------------------------------------
-		8187B AC_XX_PARAM bits
-----------------------------------------------------------------------------
-*/
-#define AC_PARAM_TXOP_LIMIT_OFFSET		16
-#define AC_PARAM_ECW_MAX_OFFSET			12
-#define AC_PARAM_ECW_MIN_OFFSET			8
-#define AC_PARAM_AIFS_OFFSET			0
-
-/*
-----------------------------------------------------------------------------
-		8187B ACM_CONTROL bits					(Offset 0xBF, 1 Byte)
-----------------------------------------------------------------------------
-*/
-#define VOQ_ACM_EN				(0x01 << 7)	/*BIT7	*/
-#define VIQ_ACM_EN				(0x01 << 6)	/*BIT6	*/
-#define BEQ_ACM_EN				(0x01 << 5)	/*BIT5	*/
-#define ACM_HW_EN				(0x01 << 4)	/*BIT4	*/
-#define VOQ_ACM_CTL				(0x01 << 2)	/*BIT2	*/	/* Set to 1 when AC_VO used time reaches or exceeds the admitted time	*/
-#define VIQ_ACM_CTL				(0x01 << 1)	/*BIT1	*/	/* Set to 1 when AC_VI used time reaches or exceeds the admitted time	*/
-#define BEQ_ACM_CTL				(0x01 << 0)	/*BIT0	*/	/* Set to 1 when AC_BE used time reaches or exceeds the admitted time	*/
-
-
-/*
-----------------------------------------------------------------------------
-		8185B SW_3W_CMD bits					(Offset 0x27C-0x27D, 16bit)
-----------------------------------------------------------------------------
-*/
-#define SW_3W_CMD0_HOLD		((1 << 7))
-#define SW_3W_CMD1_RE		((1 << 0)) /* BIT8		*/
-#define SW_3W_CMD1_WE		((1 << 1)) /* BIT9		*/
-#define SW_3W_CMD1_DONE		((1 << 2)) /* BIT10		*/
-
-#define BB_HOST_BANG_RW		(1 << 3)
-
-/*
-----------------------------------------------------------------------------
-		8185B RATE_FALLBACK_CTL bits			(Offset 0xBE, 8bit)
-----------------------------------------------------------------------------
-*/
-#define RATE_FALLBACK_CTL_ENABLE				((1 << 7))
-#define RATE_FALLBACK_CTL_ENABLE_RTSCTS		((1 << 6))
-/* Auto rate fallback per 2^n retry. */
-#define RATE_FALLBACK_CTL_AUTO_STEP0	0x00
-#define RATE_FALLBACK_CTL_AUTO_STEP1	0x01
-#define RATE_FALLBACK_CTL_AUTO_STEP2	0x02
-#define RATE_FALLBACK_CTL_AUTO_STEP3	0x03
-
-
-#define RTL8225z2_ANAPARAM_OFF	0x55480658
-#define RTL8225z2_ANAPARAM2_OFF	0x72003f70
-/* by amy for power save		*/
-#define RF_CHANGE_BY_HW BIT30
-#define RF_CHANGE_BY_PS BIT29
-#define RF_CHANGE_BY_IPS BIT28
-/* by amy for power save		*/
-/* by amy for antenna			*/
-#define EEPROM_SW_REVD_OFFSET 0x3f
-
-/*  BIT[8-9] is for SW Antenna Diversity.
- *  Only the value EEPROM_SW_AD_ENABLE means enable, other values are disable.
- */
-#define EEPROM_SW_AD_MASK			0x0300
-#define EEPROM_SW_AD_ENABLE			0x0100
-
-/* BIT[10-11] determine if Antenna 1 is the Default Antenna.
- * Only the value EEPROM_DEF_ANT_1 means TRUE, other values are FALSE.
- */
-#define EEPROM_DEF_ANT_MASK			0x0C00
-#define EEPROM_DEF_ANT_1			0x0400
-/*by amy for antenna																				*/
-/* {by amy 080312																					*/
-/* 0x7C, 0x7D Crystal calibration and Tx Power tracking mechanism. Added by Roger. 2007.12.10.		*/
-#define EEPROM_RSV						0x7C
-#define EEPROM_XTAL_CAL_XOUT_MASK	0x0F	/* 0x7C[3:0], Crystal calibration for Xout.				*/
-#define EEPROM_XTAL_CAL_XIN_MASK		0xF0	/* 0x7C[7:4], Crystal calibration for Xin.			*/
-#define EEPROM_THERMAL_METER_MASK	0x0F00	/* 0x7D[3:0], Thermal meter reference level.			*/
-#define EEPROM_XTAL_CAL_ENABLE		0x1000	/* 0x7D[4], Crystal calibration enabled/disabled BIT.	*/
-#define EEPROM_THERMAL_METER_ENABLE	0x2000	/* 0x7D[5], Thermal meter enabled/disabled BIT.			*/
-#define EN_LPF_CAL			0x238	/* Enable LPF Calibration.										*/
-#define PWR_METER_EN		BIT1
-/* <RJ_TODO_8185B> where are false alarm counters in 8185B? */
-#define CCK_FALSE_ALARM		0xD0
-/* by amy 080312} */
-
-/* YJ,add for Country IE, 080630 */
-#define EEPROM_COUNTRY_CODE  0x2E
-/* YJ,add,080630,end */
-
-#endif
diff --git a/drivers/staging/rtl8187se/r8180_rtl8225.h b/drivers/staging/rtl8187se/r8180_rtl8225.h
deleted file mode 100644
index 7df73927b3cc..000000000000
--- a/drivers/staging/rtl8187se/r8180_rtl8225.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * This is part of the rtl8180-sa2400 driver released under the GPL (See file
- * COPYING for details).
- *
- * Copyright (c) 2005 Andrea Merello <andrea.merello@gmail.com>
- *
- * This files contains programming code for the rtl8225 radio frontend.
- *
- * *Many* thanks to Realtek Corp. for their great support!
- */
-
-#include "r8180.h"
-
-#define RTL8225_ANAPARAM_ON  0xa0000b59
-#define RTL8225_ANAPARAM_OFF 0xa00beb59
-#define RTL8225_ANAPARAM2_OFF 0x840dec11
-#define RTL8225_ANAPARAM2_ON  0x860dec11
-#define RTL8225_ANAPARAM_SLEEP 0xa00bab59
-#define RTL8225_ANAPARAM2_SLEEP 0x840dec11
-
-void rtl8225z2_rf_init(struct net_device *dev);
-void rtl8225z2_rf_set_chan(struct net_device *dev, short ch);
-void rtl8225z2_rf_close(struct net_device *dev);
-
-void RF_WriteReg(struct net_device *dev, u8 offset, u16 data);
-u16 RF_ReadReg(struct net_device *dev, u8 offset);
-
-void rtl8180_set_mode(struct net_device *dev, int mode);
-void rtl8180_set_mode(struct net_device *dev, int mode);
-bool SetZebraRFPowerState8185(struct net_device *dev,
-			      enum rt_rf_power_state eRFPowerState);
-void rtl8225z4_rf_sleep(struct net_device *dev);
-void rtl8225z4_rf_wakeup(struct net_device *dev);
-
diff --git a/drivers/staging/rtl8187se/r8180_rtl8225z2.c b/drivers/staging/rtl8187se/r8180_rtl8225z2.c
deleted file mode 100644
index 47104fa05c55..000000000000
--- a/drivers/staging/rtl8187se/r8180_rtl8225z2.c
+++ /dev/null
@@ -1,811 +0,0 @@
-/*
- * This is part of the rtl8180-sa2400 driver
- * released under the GPL (See file COPYING for details).
- * Copyright (c) 2005 Andrea Merello <andrea.merello@gmail.com>
- *
- * This files contains programming code for the rtl8225
- * radio frontend.
- *
- * *Many* thanks to Realtek Corp. for their great support!
- */
-
-#include "r8180_hw.h"
-#include "r8180_rtl8225.h"
-#include "r8180_93cx6.h"
-
-#include "ieee80211/dot11d.h"
-
-static void write_rtl8225(struct net_device *dev, u8 adr, u16 data)
-{
-	int i;
-	u16 out, select;
-	u8 bit;
-	u32 bangdata = (data << 4) | (adr & 0xf);
-
-	out = read_nic_word(dev, RFPinsOutput) & 0xfff3;
-
-	write_nic_word(dev, RFPinsEnable,
-		(read_nic_word(dev, RFPinsEnable) | 0x7));
-
-	select = read_nic_word(dev, RFPinsSelect);
-
-	write_nic_word(dev, RFPinsSelect, select | 0x7 |
-		       SW_CONTROL_GPIO);
-
-	force_pci_posting(dev);
-	udelay(10);
-
-	write_nic_word(dev, RFPinsOutput, out | BB_HOST_BANG_EN);
-
-	force_pci_posting(dev);
-	udelay(2);
-
-	write_nic_word(dev, RFPinsOutput, out);
-
-	force_pci_posting(dev);
-	udelay(10);
-
-	for (i = 15; i >= 0; i--) {
-		bit = (bangdata & (1 << i)) >> i;
-
-		write_nic_word(dev, RFPinsOutput, bit | out);
-
-		write_nic_word(dev, RFPinsOutput, bit | out | BB_HOST_BANG_CLK);
-		write_nic_word(dev, RFPinsOutput, bit | out | BB_HOST_BANG_CLK);
-
-		i--;
-		bit = (bangdata & (1 << i)) >> i;
-
-		write_nic_word(dev, RFPinsOutput, bit | out | BB_HOST_BANG_CLK);
-		write_nic_word(dev, RFPinsOutput, bit | out | BB_HOST_BANG_CLK);
-
-		write_nic_word(dev, RFPinsOutput, bit | out);
-
-	}
-
-	write_nic_word(dev, RFPinsOutput, out | BB_HOST_BANG_EN);
-
-	force_pci_posting(dev);
-	udelay(10);
-
-	write_nic_word(dev, RFPinsOutput, out | BB_HOST_BANG_EN);
-
-	write_nic_word(dev, RFPinsSelect, select | SW_CONTROL_GPIO);
-
-	rtl8185_rf_pins_enable(dev);
-}
-
-static const u8 rtl8225_agc[] = {
-	0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e,
-	0x9d, 0x9c, 0x9b, 0x9a, 0x99, 0x98, 0x97, 0x96,
-	0x95, 0x94, 0x93, 0x92, 0x91, 0x90, 0x8f, 0x8e,
-	0x8d, 0x8c, 0x8b, 0x8a, 0x89, 0x88, 0x87, 0x86,
-	0x85, 0x84, 0x83, 0x82, 0x81, 0x80, 0x3f, 0x3e,
-	0x3d, 0x3c, 0x3b, 0x3a, 0x39, 0x38, 0x37, 0x36,
-	0x35, 0x34, 0x33, 0x32, 0x31, 0x30, 0x2f, 0x2e,
-	0x2d, 0x2c, 0x2b, 0x2a, 0x29, 0x28, 0x27, 0x26,
-	0x25, 0x24, 0x23, 0x22, 0x21, 0x20, 0x1f, 0x1e,
-	0x1d, 0x1c, 0x1b, 0x1a, 0x19, 0x18, 0x17, 0x16,
-	0x15, 0x14, 0x13, 0x12, 0x11, 0x10, 0x0f, 0x0e,
-	0x0d, 0x0c, 0x0b, 0x0a, 0x09, 0x08, 0x07, 0x06,
-	0x05, 0x04, 0x03, 0x02, 0x01, 0x01, 0x01, 0x01,
-	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
-	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
-	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
-};
-
-static const u32 rtl8225_chan[] = {
-	0,
-	0x0080, 0x0100, 0x0180, 0x0200, 0x0280, 0x0300, 0x0380,
-	0x0400, 0x0480, 0x0500, 0x0580, 0x0600, 0x0680, 0x074A,
-};
-
-static const u8 rtl8225z2_gain_bg[] = {
-	0x23, 0x15, 0xa5, /* -82-1dBm */
-	0x23, 0x15, 0xb5, /* -82-2dBm */
-	0x23, 0x15, 0xc5, /* -82-3dBm */
-	0x33, 0x15, 0xc5, /* -78dBm */
-	0x43, 0x15, 0xc5, /* -74dBm */
-	0x53, 0x15, 0xc5, /* -70dBm */
-	0x63, 0x15, 0xc5, /* -66dBm */
-};
-
-static const u8 rtl8225z2_gain_a[] = {
-	0x13, 0x27, 0x5a, /* -82dBm */
-	0x23, 0x23, 0x58, /* -82dBm */
-	0x33, 0x1f, 0x56, /* -82dBm */
-	0x43, 0x1b, 0x54, /* -78dBm */
-	0x53, 0x17, 0x51, /* -74dBm */
-	0x63, 0x24, 0x4f, /* -70dBm */
-	0x73, 0x0f, 0x4c, /* -66dBm */
-};
-
-static const u16 rtl8225z2_rxgain[] = {
-	0x0400, 0x0401, 0x0402, 0x0403, 0x0404, 0x0405, 0x0408, 0x0409,
-	0x040a, 0x040b, 0x0502, 0x0503, 0x0504, 0x0505, 0x0540, 0x0541,
-	0x0542, 0x0543, 0x0544, 0x0545, 0x0580, 0x0581, 0x0582, 0x0583,
-	0x0584, 0x0585, 0x0588, 0x0589, 0x058a, 0x058b, 0x0643, 0x0644,
-	0x0645, 0x0680, 0x0681, 0x0682, 0x0683, 0x0684, 0x0685, 0x0688,
-	0x0689, 0x068a, 0x068b, 0x068c, 0x0742, 0x0743, 0x0744, 0x0745,
-	0x0780, 0x0781, 0x0782, 0x0783, 0x0784, 0x0785, 0x0788, 0x0789,
-	0x078a, 0x078b, 0x078c, 0x078d, 0x0790, 0x0791, 0x0792, 0x0793,
-	0x0794, 0x0795, 0x0798, 0x0799, 0x079a, 0x079b, 0x079c, 0x079d,
-	0x07a0, 0x07a1, 0x07a2, 0x07a3, 0x07a4, 0x07a5, 0x07a8, 0x07a9,
-	0x03aa, 0x03ab, 0x03ac, 0x03ad, 0x03b0, 0x03b1, 0x03b2, 0x03b3,
-	0x03b4, 0x03b5, 0x03b8, 0x03b9, 0x03ba, 0x03bb
-
-};
-
-static void rtl8225z2_set_gain(struct net_device *dev, short gain)
-{
-	const u8 *rtl8225_gain;
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	u8 mode = priv->ieee80211->mode;
-
-	if (mode == IEEE_B || mode == IEEE_G)
-		rtl8225_gain = rtl8225z2_gain_bg;
-	else
-		rtl8225_gain = rtl8225z2_gain_a;
-
-	write_phy_ofdm(dev, 0x0b, rtl8225_gain[gain * 3]);
-	write_phy_ofdm(dev, 0x1b, rtl8225_gain[gain * 3 + 1]);
-	write_phy_ofdm(dev, 0x1d, rtl8225_gain[gain * 3 + 2]);
-	write_phy_ofdm(dev, 0x21, 0x37);
-}
-
-static u32 read_rtl8225(struct net_device *dev, u8 adr)
-{
-	u32 data2Write = ((u32)(adr & 0x1f)) << 27;
-	u32 dataRead;
-	u32 mask;
-	u16 oval, oval2, oval3, tmp;
-	int i;
-	short bit, rw;
-	u8 wLength = 6;
-	u8 rLength = 12;
-	u8 low2high = 0;
-
-	oval = read_nic_word(dev, RFPinsOutput);
-	oval2 = read_nic_word(dev, RFPinsEnable);
-	oval3 = read_nic_word(dev, RFPinsSelect);
-
-	write_nic_word(dev, RFPinsEnable, (oval2|0xf));
-	write_nic_word(dev, RFPinsSelect, (oval3|0xf));
-
-	dataRead = 0;
-
-	oval &= ~0xf;
-
-	write_nic_word(dev, RFPinsOutput, oval | BB_HOST_BANG_EN);
-	udelay(4);
-
-	write_nic_word(dev, RFPinsOutput, oval);
-	udelay(5);
-
-	rw = 0;
-
-	mask = (low2high) ? 0x01 : (((u32)0x01)<<(32-1));
-
-	for (i = 0; i < wLength/2; i++) {
-		bit = ((data2Write&mask) != 0) ? 1 : 0;
-		write_nic_word(dev, RFPinsOutput, bit | oval | rw);
-		udelay(1);
-
-		write_nic_word(dev, RFPinsOutput,
-				bit | oval | BB_HOST_BANG_CLK | rw);
-		udelay(2);
-		write_nic_word(dev, RFPinsOutput,
-				bit | oval | BB_HOST_BANG_CLK | rw);
-		udelay(2);
-
-		mask = (low2high) ? (mask<<1) : (mask>>1);
-
-		if (i == 2) {
-			rw = BB_HOST_BANG_RW;
-			write_nic_word(dev, RFPinsOutput,
-					bit | oval | BB_HOST_BANG_CLK | rw);
-			udelay(2);
-			write_nic_word(dev, RFPinsOutput, bit | oval | rw);
-			udelay(2);
-			break;
-		}
-
-		bit = ((data2Write&mask) != 0) ? 1 : 0;
-
-		write_nic_word(dev, RFPinsOutput,
-				oval | bit | rw | BB_HOST_BANG_CLK);
-		udelay(2);
-		write_nic_word(dev, RFPinsOutput,
-				oval | bit | rw | BB_HOST_BANG_CLK);
-		udelay(2);
-
-		write_nic_word(dev, RFPinsOutput, oval | bit | rw);
-		udelay(1);
-
-		mask = (low2high) ? (mask<<1) : (mask>>1);
-	}
-
-	write_nic_word(dev, RFPinsOutput, rw|oval);
-	udelay(2);
-	mask = (low2high) ? 0x01 : (((u32)0x01) << (12-1));
-
-	/*
-	 * We must set data pin to HW controlled, otherwise RF can't driver it
-	 * and value RF register won't be able to read back properly.
-	 */
-	write_nic_word(dev, RFPinsEnable, (oval2 & (~0x01)));
-
-	for (i = 0; i < rLength; i++) {
-		write_nic_word(dev, RFPinsOutput, rw|oval); udelay(1);
-
-		write_nic_word(dev, RFPinsOutput, rw|oval|BB_HOST_BANG_CLK);
-		udelay(2);
-		write_nic_word(dev, RFPinsOutput, rw|oval|BB_HOST_BANG_CLK);
-		udelay(2);
-		write_nic_word(dev, RFPinsOutput, rw|oval|BB_HOST_BANG_CLK);
-		udelay(2);
-		tmp = read_nic_word(dev, RFPinsInput);
-
-		dataRead |= (tmp & BB_HOST_BANG_CLK ? mask : 0);
-
-		write_nic_word(dev, RFPinsOutput, (rw|oval)); udelay(2);
-
-		mask = (low2high) ? (mask<<1) : (mask>>1);
-	}
-
-	write_nic_word(dev, RFPinsOutput,
-			BB_HOST_BANG_EN | BB_HOST_BANG_RW | oval);
-	udelay(2);
-
-	write_nic_word(dev, RFPinsEnable, oval2);
-	write_nic_word(dev, RFPinsSelect, oval3); /* Set To SW Switch */
-	write_nic_word(dev, RFPinsOutput, 0x3a0);
-
-	return dataRead;
-}
-
-void rtl8225z2_rf_close(struct net_device *dev)
-{
-	RF_WriteReg(dev, 0x4, 0x1f);
-
-	force_pci_posting(dev);
-	mdelay(1);
-
-	rtl8180_set_anaparam(dev, RTL8225z2_ANAPARAM_OFF);
-	rtl8185_set_anaparam2(dev, RTL8225z2_ANAPARAM2_OFF);
-}
-
-/*
- * Map dBm into Tx power index according to current HW model, for example,
- * RF and PA, and current wireless mode.
- */
-static s8 DbmToTxPwrIdx(struct r8180_priv *priv,
-			enum wireless_mode mode, s32 PowerInDbm)
-{
-	bool bUseDefault = true;
-	s8 TxPwrIdx = 0;
-
-	/*
-	 * OFDM Power in dBm = Index * 0.5 + 0
-	 * CCK Power in dBm = Index * 0.25 + 13
-	 */
-	s32 tmp = 0;
-
-	if (mode == WIRELESS_MODE_G) {
-		bUseDefault = false;
-		tmp = (2 * PowerInDbm);
-
-		if (tmp < 0)
-			TxPwrIdx = 0;
-		else if (tmp > 40) /* 40 means 20 dBm. */
-			TxPwrIdx = 40;
-		else
-			TxPwrIdx = (s8)tmp;
-	} else if (mode == WIRELESS_MODE_B) {
-		bUseDefault = false;
-		tmp = (4 * PowerInDbm) - 52;
-
-		if (tmp < 0)
-			TxPwrIdx = 0;
-		else if (tmp > 28) /* 28 means 20 dBm. */
-			TxPwrIdx = 28;
-		else
-			TxPwrIdx = (s8)tmp;
-	}
-
-	/*
-	 * TRUE if we want to use a default implementation.
-	 * We shall set it to FALSE when we have exact translation formula
-	 * for target IC. 070622, by rcnjko.
-	 */
-	if (bUseDefault) {
-		if (PowerInDbm < 0)
-			TxPwrIdx = 0;
-		else if (PowerInDbm > 35)
-			TxPwrIdx = 35;
-		else
-			TxPwrIdx = (u8)PowerInDbm;
-	}
-
-	return TxPwrIdx;
-}
-
-void rtl8225z2_SetTXPowerLevel(struct net_device *dev, short ch)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	u8 max_cck_power_level;
-	u8 max_ofdm_power_level;
-	u8 min_ofdm_power_level;
-	char cck_power_level = (char)(0xff & priv->chtxpwr[ch]);
-	char ofdm_power_level = (char)(0xff & priv->chtxpwr_ofdm[ch]);
-
-	if (IS_DOT11D_ENABLE(priv->ieee80211) &&
-	    IS_DOT11D_STATE_DONE(priv->ieee80211)) {
-		u8 MaxTxPwrInDbm = DOT11D_GetMaxTxPwrInDbm(priv->ieee80211, ch);
-		u8 CckMaxPwrIdx = DbmToTxPwrIdx(priv, WIRELESS_MODE_B,
-							MaxTxPwrInDbm);
-		u8 OfdmMaxPwrIdx = DbmToTxPwrIdx(priv, WIRELESS_MODE_G,
-							MaxTxPwrInDbm);
-
-		if (cck_power_level > CckMaxPwrIdx)
-			cck_power_level = CckMaxPwrIdx;
-		if (ofdm_power_level > OfdmMaxPwrIdx)
-			ofdm_power_level = OfdmMaxPwrIdx;
-	}
-
-	max_cck_power_level = 15;
-	max_ofdm_power_level = 25;
-	min_ofdm_power_level = 10;
-
-	if (cck_power_level > 35)
-		cck_power_level = 35;
-
-	write_nic_byte(dev, CCK_TXAGC, cck_power_level);
-	force_pci_posting(dev);
-	mdelay(1);
-
-	if (ofdm_power_level > 35)
-		ofdm_power_level = 35;
-
-	if (priv->up == 0) {
-		write_phy_ofdm(dev, 2, 0x42);
-		write_phy_ofdm(dev, 5, 0x00);
-		write_phy_ofdm(dev, 6, 0x40);
-		write_phy_ofdm(dev, 7, 0x00);
-		write_phy_ofdm(dev, 8, 0x40);
-	}
-
-	write_nic_byte(dev, OFDM_TXAGC, ofdm_power_level);
-
-	if (ofdm_power_level <= 11) {
-		write_phy_ofdm(dev, 0x07, 0x5c);
-		write_phy_ofdm(dev, 0x09, 0x5c);
-	}
-
-	if (ofdm_power_level <= 17) {
-		write_phy_ofdm(dev, 0x07, 0x54);
-		write_phy_ofdm(dev, 0x09, 0x54);
-	} else {
-		write_phy_ofdm(dev, 0x07, 0x50);
-		write_phy_ofdm(dev, 0x09, 0x50);
-	}
-
-	force_pci_posting(dev);
-	mdelay(1);
-}
-
-void rtl8225z2_rf_set_chan(struct net_device *dev, short ch)
-{
-	rtl8225z2_SetTXPowerLevel(dev, ch);
-
-	RF_WriteReg(dev, 0x7, rtl8225_chan[ch]);
-
-	if ((RF_ReadReg(dev, 0x7) & 0x0F80) != rtl8225_chan[ch])
-		RF_WriteReg(dev, 0x7, rtl8225_chan[ch]);
-
-	mdelay(1);
-
-	force_pci_posting(dev);
-	mdelay(10);
-}
-
-static void rtl8225_host_pci_init(struct net_device *dev)
-{
-	write_nic_word(dev, RFPinsOutput, 0x480);
-
-	rtl8185_rf_pins_enable(dev);
-
-	write_nic_word(dev, RFPinsSelect, 0x88 | SW_CONTROL_GPIO);
-
-	write_nic_byte(dev, GP_ENABLE, 0);
-
-	force_pci_posting(dev);
-	mdelay(200);
-
-	/* bit 6 is for RF on/off detection */
-	write_nic_word(dev, GP_ENABLE, 0xff & (~(1 << 6)));
-}
-
-void rtl8225z2_rf_init(struct net_device *dev)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	int i;
-	short channel = 1;
-	u16 brsr;
-	u32 data;
-
-	priv->chan = channel;
-
-	rtl8225_host_pci_init(dev);
-
-	write_nic_dword(dev, RF_TIMING, 0x000a8008);
-
-	brsr = read_nic_word(dev, BRSR);
-
-	write_nic_word(dev, BRSR, 0xffff);
-
-	write_nic_dword(dev, RF_PARA, 0x100044);
-
-	rtl8180_set_mode(dev, EPROM_CMD_CONFIG);
-	write_nic_byte(dev, CONFIG3, 0x44);
-	rtl8180_set_mode(dev, EPROM_CMD_NORMAL);
-
-	rtl8185_rf_pins_enable(dev);
-
-	write_rtl8225(dev, 0x0, 0x2bf); mdelay(1);
-	write_rtl8225(dev, 0x1, 0xee0); mdelay(1);
-	write_rtl8225(dev, 0x2, 0x44d); mdelay(1);
-	write_rtl8225(dev, 0x3, 0x441); mdelay(1);
-	write_rtl8225(dev, 0x4, 0x8c3); mdelay(1);
-	write_rtl8225(dev, 0x5, 0xc72); mdelay(1);
-	write_rtl8225(dev, 0x6, 0xe6);  mdelay(1);
-	write_rtl8225(dev, 0x7, rtl8225_chan[channel]);  mdelay(1);
-	write_rtl8225(dev, 0x8, 0x3f);  mdelay(1);
-	write_rtl8225(dev, 0x9, 0x335); mdelay(1);
-	write_rtl8225(dev, 0xa, 0x9d4); mdelay(1);
-	write_rtl8225(dev, 0xb, 0x7bb); mdelay(1);
-	write_rtl8225(dev, 0xc, 0x850); mdelay(1);
-	write_rtl8225(dev, 0xd, 0xcdf); mdelay(1);
-	write_rtl8225(dev, 0xe, 0x2b);  mdelay(1);
-	write_rtl8225(dev, 0xf, 0x114);
-
-	mdelay(100);
-
-	write_rtl8225(dev, 0x0, 0x1b7);
-
-	for (i = 0; i < ARRAY_SIZE(rtl8225z2_rxgain); i++) {
-		write_rtl8225(dev, 0x1, i + 1);
-		write_rtl8225(dev, 0x2, rtl8225z2_rxgain[i]);
-	}
-
-	write_rtl8225(dev, 0x3, 0x80);
-	write_rtl8225(dev, 0x5, 0x4);
-
-	write_rtl8225(dev, 0x0, 0xb7);
-
-	write_rtl8225(dev, 0x2, 0xc4d);
-
-	/* FIXME!! rtl8187 we have to check if calibrarion
-	 * is successful and eventually cal. again (repeat
-	 * the two write on reg 2)
-	 */
-	data = read_rtl8225(dev, 6);
-	if (!(data & 0x00000080)) {
-		write_rtl8225(dev, 0x02, 0x0c4d);
-		force_pci_posting(dev); mdelay(200);
-		write_rtl8225(dev, 0x02, 0x044d);
-		force_pci_posting(dev); mdelay(100);
-		data = read_rtl8225(dev, 6);
-		if (!(data & 0x00000080))
-			DMESGW("RF Calibration Failed!!!!\n");
-	}
-
-	mdelay(200);
-
-	write_rtl8225(dev, 0x0, 0x2bf);
-
-	for (i = 0; i < ARRAY_SIZE(rtl8225_agc); i++) {
-		write_phy_ofdm(dev, 0xb, rtl8225_agc[i]);
-		mdelay(1);
-
-		/* enable writing AGC table */
-		write_phy_ofdm(dev, 0xa, i + 0x80);
-		mdelay(1);
-	}
-
-	force_pci_posting(dev);
-	mdelay(1);
-
-	write_phy_ofdm(dev, 0x00, 0x01); mdelay(1);
-	write_phy_ofdm(dev, 0x01, 0x02); mdelay(1);
-	write_phy_ofdm(dev, 0x02, 0x62); mdelay(1);
-	write_phy_ofdm(dev, 0x03, 0x00); mdelay(1);
-	write_phy_ofdm(dev, 0x04, 0x00); mdelay(1);
-	write_phy_ofdm(dev, 0x05, 0x00); mdelay(1);
-	write_phy_ofdm(dev, 0x06, 0x40); mdelay(1);
-	write_phy_ofdm(dev, 0x07, 0x00); mdelay(1);
-	write_phy_ofdm(dev, 0x08, 0x40); mdelay(1);
-	write_phy_ofdm(dev, 0x09, 0xfe); mdelay(1);
-	write_phy_ofdm(dev, 0x0a, 0x08); mdelay(1);
-	write_phy_ofdm(dev, 0x0b, 0x80); mdelay(1);
-	write_phy_ofdm(dev, 0x0c, 0x01); mdelay(1);
-	write_phy_ofdm(dev, 0x0d, 0x43);
-	write_phy_ofdm(dev, 0x0e, 0xd3); mdelay(1);
-	write_phy_ofdm(dev, 0x0f, 0x38); mdelay(1);
-	write_phy_ofdm(dev, 0x10, 0x84); mdelay(1);
-	write_phy_ofdm(dev, 0x11, 0x07); mdelay(1);
-	write_phy_ofdm(dev, 0x12, 0x20); mdelay(1);
-	write_phy_ofdm(dev, 0x13, 0x20); mdelay(1);
-	write_phy_ofdm(dev, 0x14, 0x00); mdelay(1);
-	write_phy_ofdm(dev, 0x15, 0x40); mdelay(1);
-	write_phy_ofdm(dev, 0x16, 0x00); mdelay(1);
-	write_phy_ofdm(dev, 0x17, 0x40); mdelay(1);
-	write_phy_ofdm(dev, 0x18, 0xef); mdelay(1);
-	write_phy_ofdm(dev, 0x19, 0x19); mdelay(1);
-	write_phy_ofdm(dev, 0x1a, 0x20); mdelay(1);
-	write_phy_ofdm(dev, 0x1b, 0x15); mdelay(1);
-	write_phy_ofdm(dev, 0x1c, 0x04); mdelay(1);
-	write_phy_ofdm(dev, 0x1d, 0xc5); mdelay(1);
-	write_phy_ofdm(dev, 0x1e, 0x95); mdelay(1);
-	write_phy_ofdm(dev, 0x1f, 0x75); mdelay(1);
-	write_phy_ofdm(dev, 0x20, 0x1f); mdelay(1);
-	write_phy_ofdm(dev, 0x21, 0x17); mdelay(1);
-	write_phy_ofdm(dev, 0x22, 0x16); mdelay(1);
-	write_phy_ofdm(dev, 0x23, 0x80); mdelay(1); /* FIXME maybe not needed */
-	write_phy_ofdm(dev, 0x24, 0x46); mdelay(1);
-	write_phy_ofdm(dev, 0x25, 0x00); mdelay(1);
-	write_phy_ofdm(dev, 0x26, 0x90); mdelay(1);
-	write_phy_ofdm(dev, 0x27, 0x88); mdelay(1);
-
-	rtl8225z2_set_gain(dev, 4);
-
-	write_phy_cck(dev, 0x0, 0x98); mdelay(1);
-	write_phy_cck(dev, 0x3, 0x20); mdelay(1);
-	write_phy_cck(dev, 0x4, 0x7e); mdelay(1);
-	write_phy_cck(dev, 0x5, 0x12); mdelay(1);
-	write_phy_cck(dev, 0x6, 0xfc); mdelay(1);
-	write_phy_cck(dev, 0x7, 0x78); mdelay(1);
-	write_phy_cck(dev, 0x8, 0x2e); mdelay(1);
-	write_phy_cck(dev, 0x10, 0x93); mdelay(1);
-	write_phy_cck(dev, 0x11, 0x88); mdelay(1);
-	write_phy_cck(dev, 0x12, 0x47); mdelay(1);
-	write_phy_cck(dev, 0x13, 0xd0);
-	write_phy_cck(dev, 0x19, 0x00);
-	write_phy_cck(dev, 0x1a, 0xa0);
-	write_phy_cck(dev, 0x1b, 0x08);
-	write_phy_cck(dev, 0x40, 0x86); /* CCK Carrier Sense Threshold */
-	write_phy_cck(dev, 0x41, 0x8d); mdelay(1);
-	write_phy_cck(dev, 0x42, 0x15); mdelay(1);
-	write_phy_cck(dev, 0x43, 0x18); mdelay(1);
-	write_phy_cck(dev, 0x44, 0x36); mdelay(1);
-	write_phy_cck(dev, 0x45, 0x35); mdelay(1);
-	write_phy_cck(dev, 0x46, 0x2e); mdelay(1);
-	write_phy_cck(dev, 0x47, 0x25); mdelay(1);
-	write_phy_cck(dev, 0x48, 0x1c); mdelay(1);
-	write_phy_cck(dev, 0x49, 0x12); mdelay(1);
-	write_phy_cck(dev, 0x4a, 0x09); mdelay(1);
-	write_phy_cck(dev, 0x4b, 0x04); mdelay(1);
-	write_phy_cck(dev, 0x4c, 0x05); mdelay(1);
-
-	write_nic_byte(dev, 0x5b, 0x0d); mdelay(1);
-
-	rtl8225z2_SetTXPowerLevel(dev, channel);
-
-	/* RX antenna default to A */
-	write_phy_cck(dev, 0x11, 0x9b); mdelay(1);		/* B: 0xDB */
-	write_phy_ofdm(dev, 0x26, 0x90); mdelay(1);		/* B: 0x10 */
-
-	rtl8185_tx_antenna(dev, 0x03);				/* B: 0x00 */
-
-	/* switch to high-speed 3-wire
-	 * last digit. 2 for both cck and ofdm
-	 */
-	write_nic_dword(dev, 0x94, 0x15c00002);
-	rtl8185_rf_pins_enable(dev);
-
-	rtl8225z2_rf_set_chan(dev, priv->chan);
-}
-
-#define MAX_DOZE_WAITING_TIMES_85B		20
-#define MAX_POLLING_24F_TIMES_87SE		10
-#define LPS_MAX_SLEEP_WAITING_TIMES_87SE	5
-
-bool SetZebraRFPowerState8185(struct net_device *dev,
-			      enum rt_rf_power_state eRFPowerState)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	u8			btCR9346, btConfig3;
-	bool bActionAllowed = true, bTurnOffBB = true;
-	u8			u1bTmp;
-	int			i;
-	bool		bResult = true;
-	u8			QueueID;
-
-	if (priv->SetRFPowerStateInProgress == true)
-		return false;
-
-	priv->SetRFPowerStateInProgress = true;
-
-	btCR9346 = read_nic_byte(dev, CR9346);
-	write_nic_byte(dev, CR9346, (btCR9346 | 0xC0));
-
-	btConfig3 = read_nic_byte(dev, CONFIG3);
-	write_nic_byte(dev, CONFIG3, (btConfig3 | CONFIG3_PARM_En));
-
-	switch (eRFPowerState) {
-	case RF_ON:
-		write_nic_word(dev, 0x37C, 0x00EC);
-
-		/* turn on AFE */
-		write_nic_byte(dev, 0x54, 0x00);
-		write_nic_byte(dev, 0x62, 0x00);
-
-		/* turn on RF */
-		RF_WriteReg(dev, 0x0, 0x009f); udelay(500);
-		RF_WriteReg(dev, 0x4, 0x0972); udelay(500);
-
-		/* turn on RF again */
-		RF_WriteReg(dev, 0x0, 0x009f); udelay(500);
-		RF_WriteReg(dev, 0x4, 0x0972); udelay(500);
-
-		/* turn on BB */
-		write_phy_ofdm(dev, 0x10, 0x40);
-		write_phy_ofdm(dev, 0x12, 0x40);
-
-		/* Avoid power down at init time. */
-		write_nic_byte(dev, CONFIG4, priv->RFProgType);
-
-		u1bTmp = read_nic_byte(dev, 0x24E);
-		write_nic_byte(dev, 0x24E, (u1bTmp & (~(BIT5 | BIT6))));
-		break;
-	case RF_SLEEP:
-		for (QueueID = 0, i = 0; QueueID < 6;) {
-			if (get_curr_tx_free_desc(dev, QueueID) ==
-							priv->txringcount) {
-				QueueID++;
-				continue;
-			} else {
-				priv->TxPollingTimes++;
-				if (priv->TxPollingTimes >=
-					LPS_MAX_SLEEP_WAITING_TIMES_87SE) {
-					bActionAllowed = false;
-					break;
-				} else
-					udelay(10);
-			}
-		}
-
-		if (bActionAllowed) {
-			/* turn off BB RXIQ matrix to cut off rx signal */
-			write_phy_ofdm(dev, 0x10, 0x00);
-			write_phy_ofdm(dev, 0x12, 0x00);
-
-			/* turn off RF */
-			RF_WriteReg(dev, 0x4, 0x0000);
-			RF_WriteReg(dev, 0x0, 0x0000);
-
-			/* turn off AFE except PLL */
-			write_nic_byte(dev, 0x62, 0xff);
-			write_nic_byte(dev, 0x54, 0xec);
-
-			mdelay(1);
-
-			{
-				int i = 0;
-				while (true) {
-					u8 tmp24F = read_nic_byte(dev, 0x24f);
-
-					if ((tmp24F == 0x01) ||
-							(tmp24F == 0x09)) {
-						bTurnOffBB = true;
-						break;
-					} else {
-						udelay(10);
-						i++;
-						priv->TxPollingTimes++;
-
-						if (priv->TxPollingTimes >= LPS_MAX_SLEEP_WAITING_TIMES_87SE) {
-							bTurnOffBB = false;
-							break;
-						} else
-							udelay(10);
-					}
-				}
-			}
-
-			if (bTurnOffBB) {
-				/* turn off BB */
-				u1bTmp = read_nic_byte(dev, 0x24E);
-				write_nic_byte(dev, 0x24E,
-						(u1bTmp | BIT5 | BIT6));
-
-				/* turn off AFE PLL */
-				write_nic_byte(dev, 0x54, 0xFC);
-				write_nic_word(dev, 0x37C, 0x00FC);
-			}
-		}
-		break;
-	case RF_OFF:
-		for (QueueID = 0, i = 0; QueueID < 6;) {
-			if (get_curr_tx_free_desc(dev, QueueID) ==
-					priv->txringcount) {
-				QueueID++;
-				continue;
-			} else {
-				udelay(10);
-				i++;
-			}
-
-			if (i >= MAX_DOZE_WAITING_TIMES_85B)
-				break;
-		}
-
-		/* turn off BB RXIQ matrix to cut off rx signal */
-		write_phy_ofdm(dev, 0x10, 0x00);
-		write_phy_ofdm(dev, 0x12, 0x00);
-
-		/* turn off RF */
-		RF_WriteReg(dev, 0x4, 0x0000);
-		RF_WriteReg(dev, 0x0, 0x0000);
-
-		/* turn off AFE except PLL */
-		write_nic_byte(dev, 0x62, 0xff);
-		write_nic_byte(dev, 0x54, 0xec);
-
-		mdelay(1);
-
-		{
-			int i = 0;
-
-			while (true) {
-				u8 tmp24F = read_nic_byte(dev, 0x24f);
-
-				if ((tmp24F == 0x01) || (tmp24F == 0x09)) {
-					bTurnOffBB = true;
-					break;
-				} else {
-					bTurnOffBB = false;
-					udelay(10);
-					i++;
-				}
-
-				if (i > MAX_POLLING_24F_TIMES_87SE)
-					break;
-			}
-		}
-
-		if (bTurnOffBB) {
-			/* turn off BB */
-			u1bTmp = read_nic_byte(dev, 0x24E);
-			write_nic_byte(dev, 0x24E, (u1bTmp | BIT5 | BIT6));
-
-			/* turn off AFE PLL (80M) */
-			write_nic_byte(dev, 0x54, 0xFC);
-			write_nic_word(dev, 0x37C, 0x00FC);
-		}
-		break;
-	}
-
-	btConfig3 &= ~(CONFIG3_PARM_En);
-	write_nic_byte(dev, CONFIG3, btConfig3);
-
-	btCR9346 &= ~(0xC0);
-	write_nic_byte(dev, CR9346, btCR9346);
-
-	if (bResult && bActionAllowed)
-		priv->eRFPowerState = eRFPowerState;
-
-	priv->SetRFPowerStateInProgress = false;
-
-	return bResult && bActionAllowed;
-}
-
-void rtl8225z4_rf_sleep(struct net_device *dev)
-{
-	MgntActSet_RF_State(dev, RF_SLEEP, RF_CHANGE_BY_PS);
-}
-
-void rtl8225z4_rf_wakeup(struct net_device *dev)
-{
-	MgntActSet_RF_State(dev, RF_ON, RF_CHANGE_BY_PS);
-}
diff --git a/drivers/staging/rtl8187se/r8180_wx.c b/drivers/staging/rtl8187se/r8180_wx.c
deleted file mode 100644
index b55249170f18..000000000000
--- a/drivers/staging/rtl8187se/r8180_wx.c
+++ /dev/null
@@ -1,1409 +0,0 @@
-/*
-	This file contains wireless extension handlers.
-
-	This is part of rtl8180 OpenSource driver.
-	Copyright (C) Andrea Merello 2004-2005  <andrea.merello@gmail.com>
-	Released under the terms of GPL (General Public Licence)
-
-	Parts of this driver are based on the GPL part
-	of the official realtek driver.
-
-	Parts of this driver are based on the rtl8180 driver skeleton
-	from Patric Schenke & Andres Salomon.
-
-	Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver.
-
-	We want to thanks the Authors of those projects and the Ndiswrapper
-	project Authors.
-*/
-
-
-#include "r8180.h"
-#include "r8180_hw.h"
-
-#include <net/iw_handler.h>
-#include "ieee80211/dot11d.h"
-
-static u32 rtl8180_rates[] = {1000000, 2000000, 5500000, 11000000,
-	6000000, 9000000, 12000000, 18000000, 24000000, 36000000, 48000000, 54000000};
-
-#define RATE_COUNT ARRAY_SIZE(rtl8180_rates)
-
-static struct rtl8187se_channel_list default_channel_plan[] = {
-	{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64}, 19},		/* FCC */
-	{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11}, 11},						/* IC */
-	{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64}, 21},	/* ETSI	*/
-	{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64}, 21},	/* Spain. Change to ETSI. */
-	{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64}, 21},	/* France. Change to ETSI. */
-	{{14, 36, 40, 44, 48, 52, 56, 60, 64}, 9},						/* MKK */
-	{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 36, 40, 44, 48, 52, 56, 60, 64}, 22},	/* MKK1	*/
-	{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64}, 21},	/* Israel */
-	{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 34, 38, 42, 46}, 17},			/* For 11a , TELEC */
-	{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14}, 14}					/* For Global Domain. 1-11:active scan, 12-14 passive scan.*/	/* +YJ, 080626 */
-};
-static int r8180_wx_get_freq(struct net_device *dev,
-			     struct iw_request_info *a,
-			     union iwreq_data *wrqu, char *b)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	return ieee80211_wx_get_freq(priv->ieee80211, a, wrqu, b);
-}
-
-
-static int r8180_wx_set_key(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu, char *key)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	struct iw_point *erq = &(wrqu->encoding);
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-	if (erq->length > 0) {
-		u32 *tkey = (u32 *) key;
-		priv->key0[0] = tkey[0];
-		priv->key0[1] = tkey[1];
-		priv->key0[2] = tkey[2];
-		priv->key0[3] = tkey[3] & 0xff;
-		DMESG("Setting wep key to %x %x %x %x",
-		      tkey[0], tkey[1], tkey[2], tkey[3]);
-		rtl8180_set_hw_wep(dev);
-	}
-	return 0;
-}
-
-
-static int r8180_wx_set_beaconinterval(struct net_device *dev,
-				       struct iw_request_info *aa,
-				       union iwreq_data *wrqu, char *b)
-{
-	int *parms = (int *)b;
-	int bi = parms[0];
-
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-	down(&priv->wx_sem);
-	DMESG("setting beacon interval to %x", bi);
-
-	priv->ieee80211->current_network.beacon_interval = bi;
-	rtl8180_commit(dev);
-	up(&priv->wx_sem);
-
-	return 0;
-}
-
-
-
-static int r8180_wx_get_mode(struct net_device *dev, struct iw_request_info *a,
-			     union iwreq_data *wrqu, char *b)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	return ieee80211_wx_get_mode(priv->ieee80211, a, wrqu, b);
-}
-
-
-
-static int r8180_wx_get_rate(struct net_device *dev,
-			     struct iw_request_info *info,
-			     union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	return ieee80211_wx_get_rate(priv->ieee80211, info, wrqu, extra);
-}
-
-
-
-static int r8180_wx_set_rate(struct net_device *dev,
-			     struct iw_request_info *info,
-			     union iwreq_data *wrqu, char *extra)
-{
-	int ret;
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-	down(&priv->wx_sem);
-
-	ret = ieee80211_wx_set_rate(priv->ieee80211, info, wrqu, extra);
-
-	up(&priv->wx_sem);
-
-	return ret;
-}
-
-
-static int r8180_wx_set_crcmon(struct net_device *dev,
-			       struct iw_request_info *info,
-			       union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	int *parms = (int *)extra;
-	int enable = (parms[0] > 0);
-	short prev = priv->crcmon;
-
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-	down(&priv->wx_sem);
-
-	if (enable)
-		priv->crcmon = 1;
-	else
-		priv->crcmon = 0;
-
-	DMESG("bad CRC in monitor mode are %s",
-	      priv->crcmon ? "accepted" : "rejected");
-
-	if (prev != priv->crcmon && priv->up)	{
-		rtl8180_down(dev);
-		rtl8180_up(dev);
-	}
-
-	up(&priv->wx_sem);
-
-	return 0;
-}
-
-
-static int r8180_wx_set_mode(struct net_device *dev, struct iw_request_info *a,
-			     union iwreq_data *wrqu, char *b)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	int ret;
-
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-	down(&priv->wx_sem);
-	if (priv->bInactivePs)	{
-		if (wrqu->mode == IW_MODE_ADHOC)
-			IPSLeave(dev);
-	}
-	ret = ieee80211_wx_set_mode(priv->ieee80211, a, wrqu, b);
-
-	up(&priv->wx_sem);
-	return ret;
-}
-
-/* YJ,add,080819,for hidden ap */
-struct  iw_range_with_scan_capa	{
-		/* Informative stuff (to choose between different interface) */
-
-		__u32		throughput; /* To give an idea... */
-
-		/* In theory this value should be the maximum benchmarked
-		 * TCP/IP throughput, because with most of these devices the
-		 * bit rate is meaningless (overhead an co) to estimate how
-		 * fast the connection will go and pick the fastest one.
-		 * I suggest people to play with Netperf or any benchmark...
-		 */
-
-		/* NWID (or domain id)	*/
-		__u32           min_nwid; /* Minimal NWID we are able to set */
-		__u32			max_nwid; /* Maximal NWID we are able to set */
-
-		/* Old Frequency (backward compat - moved lower ) */
-		__u16			old_num_channels;
-		__u8			old_num_frequency;
-
-		/* Scan capabilities */
-		__u8			scan_capa;
-};
-/* YJ,add,080819,for hidden ap */
-
-
-static int rtl8180_wx_get_range(struct net_device *dev,
-				struct iw_request_info *info,
-				union iwreq_data *wrqu, char *extra)
-{
-	struct iw_range *range = (struct iw_range *)extra;
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	u16 val;
-	int i;
-
-	wrqu->data.length = sizeof(*range);
-	memset(range, 0, sizeof(*range));
-
-	/* Let's try to keep this struct in the same order as in
-	 * linux/include/wireless.h
-	 */
-
-	/* TODO: See what values we can set, and remove the ones we can't
-	 * set, or fill them with some default data.
-	 */
-
-	/* ~5 Mb/s real (802.11b) */
-	range->throughput = 5 * 1000 * 1000;
-
-	/* TODO: Not used in 802.11b?	*/
-/*	range->min_nwid; */	/* Minimal NWID we are able to set */
-	/* TODO: Not used in 802.11b?	*/
-/*	range->max_nwid; */	/* Maximal NWID we are able to set */
-
-		/* Old Frequency (backward compat - moved lower ) */
-/*	range->old_num_channels; */
-/*	range->old_num_frequency; */
-/*	range->old_freq[6]; */ /* Filler to keep "version" at the same offset */
-	if (priv->rf_set_sens != NULL)
-		range->sensitivity = priv->max_sens;	/* signal level threshold range */
-
-	range->max_qual.qual = 100;
-	/* TODO: Find real max RSSI and stick here */
-	range->max_qual.level = 0;
-	range->max_qual.noise = -98;
-	range->max_qual.updated = 7; /* Updated all three */
-
-	range->avg_qual.qual = 92; /* > 8% missed beacons is 'bad' */
-	/* TODO: Find real 'good' to 'bad' threshold value for RSSI */
-	range->avg_qual.level = 20 + -98;
-	range->avg_qual.noise = 0;
-	range->avg_qual.updated = 7; /* Updated all three */
-
-	range->num_bitrates = RATE_COUNT;
-
-	for (i = 0; i < RATE_COUNT && i < IW_MAX_BITRATES; i++)
-		range->bitrate[i] = rtl8180_rates[i];
-
-	range->min_frag = MIN_FRAG_THRESHOLD;
-	range->max_frag = MAX_FRAG_THRESHOLD;
-
-	range->pm_capa = 0;
-
-	range->we_version_compiled = WIRELESS_EXT;
-	range->we_version_source = 16;
-
-		range->num_channels = 14;
-
-	for (i = 0, val = 0; i < 14; i++) {
-
-		/* Include only legal frequencies for some countries */
-		if ((GET_DOT11D_INFO(priv->ieee80211)->channel_map)[i+1]) {
-				range->freq[val].i = i + 1;
-			range->freq[val].m = ieee80211_wlan_frequencies[i] * 100000;
-			range->freq[val].e = 1;
-			val++;
-		} else {
-			/* FIXME: do we need to set anything for channels */
-			/* we don't use ? */
-		}
-
-		if (val == IW_MAX_FREQUENCIES)
-			break;
-	}
-
-	range->num_frequency = val;
-	range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_WPA2 |
-						IW_ENC_CAPA_CIPHER_TKIP | IW_ENC_CAPA_CIPHER_CCMP;
-
-	return 0;
-}
-
-
-static int r8180_wx_set_scan(struct net_device *dev, struct iw_request_info *a,
-			     union iwreq_data *wrqu, char *b)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	int ret;
-	struct ieee80211_device *ieee = priv->ieee80211;
-
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-	if (wrqu->data.flags & IW_SCAN_THIS_ESSID)	{
-		struct iw_scan_req *req = (struct iw_scan_req *)b;
-		if (req->essid_len)		{
-			ieee->current_network.ssid_len = req->essid_len;
-			memcpy(ieee->current_network.ssid, req->essid, req->essid_len);
-		}
-	}
-
-	down(&priv->wx_sem);
-	if (priv->up)	{
-		priv->ieee80211->actscanning = true;
-		if (priv->bInactivePs && (priv->ieee80211->state != IEEE80211_LINKED))	{
-			IPSLeave(dev);
-		ieee80211_softmac_ips_scan_syncro(priv->ieee80211);
-			ret = 0;
-		}	else	{
-			/* prevent scan in BusyTraffic */
-			/* FIXME: Need to consider last scan time */
-			if ((priv->link_detect.b_busy_traffic) && (true)) {
-				ret = 0;
-				printk("Now traffic is busy, please try later!\n");
-			}	else
-				/* prevent scan in BusyTraffic,end */
-				ret = ieee80211_wx_set_scan(priv->ieee80211, a, wrqu, b);
-		}
-	}	else
-			ret = -1;
-
-	up(&priv->wx_sem);
-
-	return ret;
-}
-
-
-static int r8180_wx_get_scan(struct net_device *dev, struct iw_request_info *a,
-			     union iwreq_data *wrqu, char *b)
-{
-
-	int ret;
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	down(&priv->wx_sem);
-	if (priv->up)
-		ret = ieee80211_wx_get_scan(priv->ieee80211, a, wrqu, b);
-	else
-		ret = -1;
-
-	up(&priv->wx_sem);
-	return ret;
-}
-
-
-static int r8180_wx_set_essid(struct net_device *dev,
-			      struct iw_request_info *a,
-			      union iwreq_data *wrqu, char *b)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	int ret;
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-	down(&priv->wx_sem);
-	if (priv->bInactivePs)
-		IPSLeave(dev);
-
-	ret = ieee80211_wx_set_essid(priv->ieee80211, a, wrqu, b);
-
-	up(&priv->wx_sem);
-	return ret;
-}
-
-
-static int r8180_wx_get_essid(struct net_device *dev,
-			      struct iw_request_info *a,
-			      union iwreq_data *wrqu, char *b)
-{
-	int ret;
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	down(&priv->wx_sem);
-
-	ret = ieee80211_wx_get_essid(priv->ieee80211, a, wrqu, b);
-
-	up(&priv->wx_sem);
-
-	return ret;
-}
-
-
-static int r8180_wx_set_freq(struct net_device *dev, struct iw_request_info *a,
-			     union iwreq_data *wrqu, char *b)
-{
-	int ret;
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-	down(&priv->wx_sem);
-
-	ret = ieee80211_wx_set_freq(priv->ieee80211, a, wrqu, b);
-
-	up(&priv->wx_sem);
-	return ret;
-}
-
-
-static int r8180_wx_get_name(struct net_device *dev,
-			     struct iw_request_info *info,
-			     union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	return ieee80211_wx_get_name(priv->ieee80211, info, wrqu, extra);
-}
-
-static int r8180_wx_set_frag(struct net_device *dev,
-			     struct iw_request_info *info,
-			     union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-	if (wrqu->frag.disabled)
-		priv->ieee80211->fts = DEFAULT_FRAG_THRESHOLD;
-	else {
-		if (wrqu->frag.value < MIN_FRAG_THRESHOLD ||
-		    wrqu->frag.value > MAX_FRAG_THRESHOLD)
-			return -EINVAL;
-
-		priv->ieee80211->fts = wrqu->frag.value & ~0x1;
-	}
-
-	return 0;
-}
-
-
-static int r8180_wx_get_frag(struct net_device *dev,
-			     struct iw_request_info *info,
-			     union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	wrqu->frag.value = priv->ieee80211->fts;
-	wrqu->frag.fixed = 0;	/* no auto select */
-	wrqu->frag.disabled = (wrqu->frag.value == DEFAULT_FRAG_THRESHOLD);
-
-	return 0;
-}
-
-
-static int r8180_wx_set_wap(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *awrq, char *extra)
-{
-	int ret;
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-	down(&priv->wx_sem);
-
-	ret = ieee80211_wx_set_wap(priv->ieee80211, info, awrq, extra);
-
-	up(&priv->wx_sem);
-	return ret;
-
-}
-
-
-static int r8180_wx_get_wap(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	return ieee80211_wx_get_wap(priv->ieee80211, info, wrqu, extra);
-}
-
-
-static int r8180_wx_set_enc(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu, char *key)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	int ret;
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-
-	down(&priv->wx_sem);
-
-	if (priv->hw_wep)
-		ret = r8180_wx_set_key(dev, info, wrqu, key);
-	else	{
-		DMESG("Setting SW wep key");
-		ret = ieee80211_wx_set_encode(priv->ieee80211, info, wrqu, key);
-	}
-
-	up(&priv->wx_sem);
-	return ret;
-}
-
-
-static int r8180_wx_get_enc(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu, char *key)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	return ieee80211_wx_get_encode(priv->ieee80211, info, wrqu, key);
-}
-
-
-static int r8180_wx_set_scan_type(struct net_device *dev,
-				  struct iw_request_info *aa,
-				  union	iwreq_data *wrqu, char *p)
-{
-
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	int *parms = (int *)p;
-	int mode = parms[0];
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-	priv->ieee80211->active_scan = mode;
-
-	return 1;
-}
-
-static int r8180_wx_set_retry(struct net_device *dev,
-			      struct iw_request_info *info,
-			      union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	int err = 0;
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-	down(&priv->wx_sem);
-
-	if (wrqu->retry.flags & IW_RETRY_LIFETIME ||
-	    wrqu->retry.disabled)	{
-		err = -EINVAL;
-		goto exit;
-	}
-	if (!(wrqu->retry.flags & IW_RETRY_LIMIT))	{
-		err = -EINVAL;
-		goto exit;
-	}
-
-	if (wrqu->retry.value > R8180_MAX_RETRY)	{
-		err = -EINVAL;
-		goto exit;
-	}
-	if (wrqu->retry.flags & IW_RETRY_MAX) {
-		priv->retry_rts = wrqu->retry.value;
-		DMESG("Setting retry for RTS/CTS data to %d", wrqu->retry.value);
-
-	}	else {
-		priv->retry_data = wrqu->retry.value;
-		DMESG("Setting retry for non RTS/CTS data to %d", wrqu->retry.value);
-	}
-
-	/* FIXME !
-	 * We might try to write directly the TX config register
-	 * or to restart just the (R)TX process.
-	 * I'm unsure if whole reset is really needed
-	 */
-
-	rtl8180_commit(dev);
-exit:
-	up(&priv->wx_sem);
-
-	return err;
-}
-
-static int r8180_wx_get_retry(struct net_device *dev,
-			      struct iw_request_info *info,
-			      union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-
-	wrqu->retry.disabled = 0; /* can't be disabled */
-
-	if ((wrqu->retry.flags & IW_RETRY_TYPE) ==
-	    IW_RETRY_LIFETIME)
-		return -EINVAL;
-
-	if (wrqu->retry.flags & IW_RETRY_MAX) {
-		wrqu->retry.flags = IW_RETRY_LIMIT | IW_RETRY_MAX;
-		wrqu->retry.value = priv->retry_rts;
-	} else {
-		wrqu->retry.flags = IW_RETRY_LIMIT | IW_RETRY_MIN;
-		wrqu->retry.value = priv->retry_data;
-	}
-
-	return 0;
-}
-
-static int r8180_wx_get_sens(struct net_device *dev,
-			     struct iw_request_info *info,
-			     union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	if (priv->rf_set_sens == NULL)
-		return -1; /* we have not this support for this radio */
-	wrqu->sens.value = priv->sens;
-	return 0;
-}
-
-
-static int r8180_wx_set_sens(struct net_device *dev,
-			     struct iw_request_info *info,
-			     union iwreq_data *wrqu, char *extra)
-{
-
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	short err = 0;
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-	down(&priv->wx_sem);
-	if (priv->rf_set_sens == NULL) {
-		err = -1; /* we have not this support for this radio */
-		goto exit;
-	}
-	if (priv->rf_set_sens(dev, wrqu->sens.value) == 0)
-		priv->sens = wrqu->sens.value;
-	else
-		err = -EINVAL;
-
-exit:
-	up(&priv->wx_sem);
-
-	return err;
-}
-
-
-static int r8180_wx_set_rawtx(struct net_device *dev,
-			      struct iw_request_info *info,
-			      union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	int ret;
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-	down(&priv->wx_sem);
-
-	ret = ieee80211_wx_set_rawtx(priv->ieee80211, info, wrqu, extra);
-
-	up(&priv->wx_sem);
-
-	return ret;
-
-}
-
-static int r8180_wx_get_power(struct net_device *dev,
-			      struct iw_request_info *info,
-			      union iwreq_data *wrqu, char *extra)
-{
-	int ret;
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	down(&priv->wx_sem);
-
-	ret = ieee80211_wx_get_power(priv->ieee80211, info, wrqu, extra);
-
-	up(&priv->wx_sem);
-
-	return ret;
-}
-
-static int r8180_wx_set_power(struct net_device *dev,
-			      struct iw_request_info *info,
-			      union iwreq_data *wrqu, char *extra)
-{
-	int ret;
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-	down(&priv->wx_sem);
-	printk("=>>>>>>>>>>=============================>set power:%d, %d!\n", wrqu->power.disabled, wrqu->power.flags);
-	if (wrqu->power.disabled == 0) {
-		wrqu->power.flags |= IW_POWER_ALL_R;
-		wrqu->power.flags |= IW_POWER_TIMEOUT;
-		wrqu->power.value = 1000;
-	}
-
-	ret = ieee80211_wx_set_power(priv->ieee80211, info, wrqu, extra);
-
-	up(&priv->wx_sem);
-
-	return ret;
-}
-
-static int r8180_wx_set_rts(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-	if (wrqu->rts.disabled)
-		priv->rts = DEFAULT_RTS_THRESHOLD;
-	else {
-		if (wrqu->rts.value < MIN_RTS_THRESHOLD ||
-		    wrqu->rts.value > MAX_RTS_THRESHOLD)
-			return -EINVAL;
-
-		priv->rts = wrqu->rts.value;
-	}
-
-	return 0;
-}
-static int r8180_wx_get_rts(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-
-
-	wrqu->rts.value = priv->rts;
-	wrqu->rts.fixed = 0;	/* no auto select */
-	wrqu->rts.disabled = (wrqu->rts.value == 0);
-
-	return 0;
-}
-static int dummy(struct net_device *dev, struct iw_request_info *a,
-		 union iwreq_data *wrqu, char *b)
-{
-	return -1;
-}
-
-static int r8180_wx_get_iwmode(struct net_device *dev,
-			       struct iw_request_info *info,
-			       union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	struct ieee80211_device *ieee;
-	int ret = 0;
-
-
-
-	down(&priv->wx_sem);
-
-	ieee = priv->ieee80211;
-
-	strcpy(extra, "802.11");
-	if (ieee->modulation & IEEE80211_CCK_MODULATION) {
-		strcat(extra, "b");
-		if (ieee->modulation & IEEE80211_OFDM_MODULATION)
-			strcat(extra, "/g");
-	} else if (ieee->modulation & IEEE80211_OFDM_MODULATION)
-		strcat(extra, "g");
-
-	up(&priv->wx_sem);
-
-	return ret;
-}
-static int r8180_wx_set_iwmode(struct net_device *dev,
-			       struct iw_request_info *info,
-			       union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	struct ieee80211_device *ieee = priv->ieee80211;
-	int *param = (int *)extra;
-	int ret = 0;
-	int modulation = 0, mode = 0;
-
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-	down(&priv->wx_sem);
-
-	if (*param == 1) {
-		modulation |= IEEE80211_CCK_MODULATION;
-		mode = IEEE_B;
-	printk(KERN_INFO "B mode!\n");
-	} else if (*param == 2) {
-		modulation |= IEEE80211_OFDM_MODULATION;
-		mode = IEEE_G;
-	printk(KERN_INFO "G mode!\n");
-	} else if (*param == 3) {
-		modulation |= IEEE80211_CCK_MODULATION;
-		modulation |= IEEE80211_OFDM_MODULATION;
-		mode = IEEE_B|IEEE_G;
-	printk(KERN_INFO "B/G mode!\n");
-	}
-
-	if (ieee->proto_started) {
-		ieee80211_stop_protocol(ieee);
-		ieee->mode = mode;
-		ieee->modulation = modulation;
-		ieee80211_start_protocol(ieee);
-	} else {
-		ieee->mode = mode;
-		ieee->modulation = modulation;
-	}
-
-	up(&priv->wx_sem);
-
-	return ret;
-}
-static int r8180_wx_get_preamble(struct net_device *dev,
-				 struct iw_request_info *info,
-				 union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-
-
-	down(&priv->wx_sem);
-
-
-
-	*extra = (char) priv->plcp_preamble_mode;	/* 0:auto 1:short 2:long */
-	up(&priv->wx_sem);
-
-	return 0;
-}
-static int r8180_wx_set_preamble(struct net_device *dev,
-				 struct iw_request_info *info,
-				 union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	int ret = 0;
-
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-	down(&priv->wx_sem);
-	if (*extra < 0 || *extra > 2)
-		ret = -1;
-	else
-		priv->plcp_preamble_mode = *((short *)extra);
-
-
-
-	up(&priv->wx_sem);
-
-	return ret;
-}
-static int r8180_wx_get_siglevel(struct net_device *dev,
-				 struct iw_request_info *info,
-				 union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	int ret = 0;
-
-
-
-	down(&priv->wx_sem);
-	/* Modify by hikaru 6.5 */
-	*((int *)extra) = priv->wstats.qual.level;/*for interface test ,it should be the priv->wstats.qual.level; */
-
-
-
-	up(&priv->wx_sem);
-
-	return ret;
-}
-static int r8180_wx_get_sigqual(struct net_device *dev,
-				struct iw_request_info *info,
-				union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	int ret = 0;
-
-
-
-	down(&priv->wx_sem);
-	/* Modify by hikaru 6.5	*/
-	*((int *)extra) = priv->wstats.qual.qual;/* for interface test ,it should be the priv->wstats.qual.qual; */
-
-
-
-	up(&priv->wx_sem);
-
-	return ret;
-}
-static int r8180_wx_reset_stats(struct net_device *dev,
-				struct iw_request_info *info,
-				union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	down(&priv->wx_sem);
-
-	priv->stats.txrdu = 0;
-	priv->stats.rxrdu = 0;
-	priv->stats.rxnolast = 0;
-	priv->stats.rxnodata = 0;
-	priv->stats.rxnopointer = 0;
-	priv->stats.txnperr = 0;
-	priv->stats.txresumed = 0;
-	priv->stats.rxerr = 0;
-	priv->stats.rxoverflow = 0;
-	priv->stats.rxint = 0;
-
-	priv->stats.txnpokint = 0;
-	priv->stats.txhpokint = 0;
-	priv->stats.txhperr = 0;
-	priv->stats.ints = 0;
-	priv->stats.shints = 0;
-	priv->stats.txoverflow = 0;
-	priv->stats.rxdmafail = 0;
-	priv->stats.txbeacon = 0;
-	priv->stats.txbeaconerr = 0;
-	priv->stats.txlpokint = 0;
-	priv->stats.txlperr = 0;
-	priv->stats.txretry = 0;/* 20060601 */
-	priv->stats.rxcrcerrmin = 0 ;
-	priv->stats.rxcrcerrmid = 0;
-	priv->stats.rxcrcerrmax = 0;
-	priv->stats.rxicverr = 0;
-
-	up(&priv->wx_sem);
-
-	return 0;
-
-}
-static int r8180_wx_radio_on(struct net_device *dev,
-			     struct iw_request_info *info,
-			     union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-
-	down(&priv->wx_sem);
-	priv->rf_wakeup(dev);
-
-	up(&priv->wx_sem);
-
-	return 0;
-
-}
-
-static int r8180_wx_radio_off(struct net_device *dev,
-			      struct iw_request_info *info,
-			      union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-
-	down(&priv->wx_sem);
-	priv->rf_sleep(dev);
-
-	up(&priv->wx_sem);
-
-	return 0;
-
-}
-static int r8180_wx_get_channelplan(struct net_device *dev,
-				    struct iw_request_info *info,
-				    union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-
-
-	down(&priv->wx_sem);
-	*extra = priv->channel_plan;
-
-
-
-	up(&priv->wx_sem);
-
-	return 0;
-}
-static int r8180_wx_set_channelplan(struct net_device *dev,
-				    struct iw_request_info *info,
-				    union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	int *val = (int *)extra;
-	int i;
-	printk("-----in fun %s\n", __func__);
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-	/* unsigned long flags; */
-	down(&priv->wx_sem);
-	if (default_channel_plan[*val].len != 0) {
-		priv->channel_plan = *val;
-		/* Clear old channel map 8 */
-		for (i = 1; i <= MAX_CHANNEL_NUMBER; i++)
-			GET_DOT11D_INFO(priv->ieee80211)->channel_map[i] = 0;
-
-		/* Set new channel map */
-		for (i = 1; i <= default_channel_plan[*val].len; i++)
-			GET_DOT11D_INFO(priv->ieee80211)->channel_map[default_channel_plan[*val].channel[i-1]] = 1;
-
-	}
-	up(&priv->wx_sem);
-
-	return 0;
-}
-
-static int r8180_wx_get_version(struct net_device *dev,
-				struct iw_request_info *info,
-				union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	/* struct ieee80211_device *ieee; */
-
-	down(&priv->wx_sem);
-	strcpy(extra, "1020.0808");
-	up(&priv->wx_sem);
-
-	return 0;
-}
-
-/* added by amy 080818 */
-/*receive datarate from user typing valid rate is from 2 to 108 (1 - 54M), if input 0, return to normal rate adaptive. */
-static int r8180_wx_set_forcerate(struct net_device *dev,
-				  struct iw_request_info *info,
-				  union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	u8 forcerate = *extra;
-
-	down(&priv->wx_sem);
-
-	printk("==============>%s(): forcerate is %d\n", __func__, forcerate);
-	if ((forcerate == 2) || (forcerate == 4) || (forcerate == 11) || (forcerate == 22) || (forcerate == 12) ||
-		(forcerate == 18) || (forcerate == 24) || (forcerate == 36) || (forcerate == 48) || (forcerate == 72) ||
-		(forcerate == 96) || (forcerate == 108)) {
-		priv->ForcedDataRate = 1;
-		priv->ieee80211->rate = forcerate * 5;
-	}	else if (forcerate == 0)	{
-		priv->ForcedDataRate = 0;
-		printk("OK! return rate adaptive\n");
-	}	else
-			printk("ERR: wrong rate\n");
-	up(&priv->wx_sem);
-	return 0;
-}
-
-static int r8180_wx_set_enc_ext(struct net_device *dev,
-				struct iw_request_info *info,
-				union iwreq_data *wrqu, char *extra)
-{
-
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	int ret = 0;
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-	down(&priv->wx_sem);
-	ret = ieee80211_wx_set_encode_ext(priv->ieee80211, info, wrqu, extra);
-	up(&priv->wx_sem);
-	return ret;
-
-}
-static int r8180_wx_set_auth(struct net_device *dev,
-			     struct iw_request_info *info,
-			     union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	int ret = 0;
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-	down(&priv->wx_sem);
-	ret = ieee80211_wx_set_auth(priv->ieee80211, info, &wrqu->param, extra);
-	up(&priv->wx_sem);
-	return ret;
-}
-
-static int r8180_wx_set_mlme(struct net_device *dev,
-			     struct iw_request_info *info,
-			     union iwreq_data *wrqu, char *extra)
-{
-	int ret = 0;
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-
-	down(&priv->wx_sem);
-#if 1
-	ret = ieee80211_wx_set_mlme(priv->ieee80211, info, wrqu, extra);
-#endif
-	up(&priv->wx_sem);
-	return ret;
-}
-static int r8180_wx_set_gen_ie(struct net_device *dev,
-			       struct iw_request_info *info,
-			       union iwreq_data *wrqu, char *extra)
-{
-	int ret = 0;
-		struct r8180_priv *priv = ieee80211_priv(dev);
-
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-	down(&priv->wx_sem);
-#if 1
-	ret = ieee80211_wx_set_gen_ie(priv->ieee80211, extra, wrqu->data.length);
-#endif
-	up(&priv->wx_sem);
-	return ret;
-
-
-}
-
-static const iw_handler r8180_wx_handlers[] =	{
-	IW_HANDLER(SIOCGIWNAME,		r8180_wx_get_name),
-	IW_HANDLER(SIOCSIWNWID,		dummy),
-	IW_HANDLER(SIOCGIWNWID,		dummy),
-	IW_HANDLER(SIOCSIWFREQ,		r8180_wx_set_freq),
-	IW_HANDLER(SIOCGIWFREQ,		r8180_wx_get_freq),
-	IW_HANDLER(SIOCSIWMODE, 	r8180_wx_set_mode),
-	IW_HANDLER(SIOCGIWMODE,		r8180_wx_get_mode),
-	IW_HANDLER(SIOCSIWSENS,		r8180_wx_set_sens),
-	IW_HANDLER(SIOCGIWSENS,		r8180_wx_get_sens),
-	IW_HANDLER(SIOCGIWRANGE,	rtl8180_wx_get_range),
-	IW_HANDLER(SIOCSIWSPY,		dummy),
-	IW_HANDLER(SIOCGIWSPY,		dummy),
-	IW_HANDLER(SIOCSIWAP,		r8180_wx_set_wap),
-	IW_HANDLER(SIOCGIWAP,		r8180_wx_get_wap),
-	IW_HANDLER(SIOCSIWMLME,		r8180_wx_set_mlme),
-	IW_HANDLER(SIOCGIWAPLIST,	dummy),		/* deprecated */
-	IW_HANDLER(SIOCSIWSCAN,		r8180_wx_set_scan),
-	IW_HANDLER(SIOCGIWSCAN,		r8180_wx_get_scan),
-	IW_HANDLER(SIOCSIWESSID,	r8180_wx_set_essid),
-	IW_HANDLER(SIOCGIWESSID,	r8180_wx_get_essid),
-	IW_HANDLER(SIOCSIWNICKN,	dummy),
-	IW_HANDLER(SIOCGIWNICKN,	dummy),
-	IW_HANDLER(SIOCSIWRATE,		r8180_wx_set_rate),
-	IW_HANDLER(SIOCGIWRATE,		r8180_wx_get_rate),
-	IW_HANDLER(SIOCSIWRTS,		r8180_wx_set_rts),
-	IW_HANDLER(SIOCGIWRTS,		r8180_wx_get_rts),
-	IW_HANDLER(SIOCSIWFRAG,		r8180_wx_set_frag),
-	IW_HANDLER(SIOCGIWFRAG,		r8180_wx_get_frag),
-	IW_HANDLER(SIOCSIWTXPOW,	dummy),
-	IW_HANDLER(SIOCGIWTXPOW,	dummy),
-	IW_HANDLER(SIOCSIWRETRY,	r8180_wx_set_retry),
-	IW_HANDLER(SIOCGIWRETRY,	r8180_wx_get_retry),
-	IW_HANDLER(SIOCSIWENCODE,	r8180_wx_set_enc),
-	IW_HANDLER(SIOCGIWENCODE,	r8180_wx_get_enc),
-	IW_HANDLER(SIOCSIWPOWER,	r8180_wx_set_power),
-	IW_HANDLER(SIOCGIWPOWER,	r8180_wx_get_power),
-	IW_HANDLER(SIOCSIWGENIE,	r8180_wx_set_gen_ie),
-	IW_HANDLER(SIOCSIWAUTH,		r8180_wx_set_auth),
-	IW_HANDLER(SIOCSIWENCODEEXT,	r8180_wx_set_enc_ext),
-};
-
-static const struct iw_priv_args r8180_private_args[] = {
-	{
-		SIOCIWFIRSTPRIV + 0x0,
-		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "badcrc"
-	},
-	{	SIOCIWFIRSTPRIV + 0x1,
-		0, 0, "dummy"
-
-	},
-	{
-		SIOCIWFIRSTPRIV + 0x2,
-		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "beaconint"
-	},
-	{	SIOCIWFIRSTPRIV + 0x3,
-		0, 0, "dummy"
-
-	},
-	{
-		SIOCIWFIRSTPRIV + 0x4,
-		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "activescan"
-
-	},
-	{	SIOCIWFIRSTPRIV + 0x5,
-		0, 0, "dummy"
-
-	},
-	{
-		SIOCIWFIRSTPRIV + 0x6,
-		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "rawtx"
-
-	},
-	{	SIOCIWFIRSTPRIV + 0x7,
-		0, 0, "dummy"
-
-	},
-	{
-		SIOCIWFIRSTPRIV + 0x8,
-		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "setiwmode"
-	},
-	{
-		SIOCIWFIRSTPRIV + 0x9,
-		0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | 32, "getiwmode"
-	},
-	{
-		SIOCIWFIRSTPRIV + 0xA,
-		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "setpreamble"
-	},
-	{
-		SIOCIWFIRSTPRIV + 0xB,
-		0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getpreamble"
-	},
-	{	SIOCIWFIRSTPRIV + 0xC,
-		0, 0, "dummy"
-	},
-	{
-		SIOCIWFIRSTPRIV + 0xD,
-		0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getrssi"
-	},
-	{	SIOCIWFIRSTPRIV + 0xE,
-		0, 0, "dummy"
-	},
-	{
-		SIOCIWFIRSTPRIV + 0xF,
-		0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getlinkqual"
-	},
-	{
-		SIOCIWFIRSTPRIV + 0x10,
-		0, 0, "resetstats"
-	},
-	{
-		SIOCIWFIRSTPRIV + 0x11,
-		0, 0, "dummy"
-	},
-	{
-		SIOCIWFIRSTPRIV + 0x12,
-		0, 0, "radioon"
-	},
-	{
-		SIOCIWFIRSTPRIV + 0x13,
-		0, 0, "radiooff"
-	},
-	{
-		SIOCIWFIRSTPRIV + 0x14,
-		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "setchannel"
-	},
-	{
-		SIOCIWFIRSTPRIV + 0x15,
-		0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getchannel"
-	},
-	{
-		SIOCIWFIRSTPRIV + 0x16,
-		0, 0, "dummy"
-	},
-	{
-		SIOCIWFIRSTPRIV + 0x17,
-		0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | 32, "getversion"
-	},
-	{
-		SIOCIWFIRSTPRIV + 0x18,
-		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "setrate"
-	},
-};
-
-
-static iw_handler r8180_private_handler[] = {
-	r8180_wx_set_crcmon, /*SIOCIWSECONDPRIV*/
-	dummy,
-	r8180_wx_set_beaconinterval,
-	dummy,
-	/* r8180_wx_set_monitor_type, */
-	r8180_wx_set_scan_type,
-	dummy,
-	r8180_wx_set_rawtx,
-	dummy,
-	r8180_wx_set_iwmode,
-	r8180_wx_get_iwmode,
-	r8180_wx_set_preamble,
-	r8180_wx_get_preamble,
-	dummy,
-	r8180_wx_get_siglevel,
-	dummy,
-	r8180_wx_get_sigqual,
-	r8180_wx_reset_stats,
-	dummy,/* r8180_wx_get_stats */
-	r8180_wx_radio_on,
-	r8180_wx_radio_off,
-	r8180_wx_set_channelplan,
-	r8180_wx_get_channelplan,
-	dummy,
-	r8180_wx_get_version,
-	r8180_wx_set_forcerate,
-};
-
-static inline int is_same_network(struct ieee80211_network *src,
-				  struct ieee80211_network *dst,
-				  struct ieee80211_device *ieee)
-{
-		/* A network is only a duplicate if the channel, BSSID, ESSID
-		 * and the capability field (in particular IBSS and BSS) all match.
-		 * We treat all <hidden> with the same BSSID and channel
-		 * as one network
-		 */
-		if (src->channel != dst->channel)
-			return 0;
-
-		if (memcmp(src->bssid, dst->bssid, ETH_ALEN) != 0)
-			return 0;
-
-		if (ieee->iw_mode != IW_MODE_INFRA) {
-			if (src->ssid_len != dst->ssid_len)
-				return 0;
-			if (memcmp(src->ssid, dst->ssid, src->ssid_len) != 0)
-				return 0;
-		}
-
-		if ((src->capability & WLAN_CAPABILITY_IBSS) !=
-		    (dst->capability & WLAN_CAPABILITY_IBSS))
-			return 0;
-		if ((src->capability & WLAN_CAPABILITY_BSS) !=
-		    (dst->capability & WLAN_CAPABILITY_BSS))
-			return 0;
-
-		return 1;
-}
-
-/* WB modified to show signal to GUI on 18-01-2008 */
-static struct iw_statistics *r8180_get_wireless_stats(struct net_device *dev)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	struct ieee80211_device *ieee = priv->ieee80211;
-	struct iw_statistics *wstats = &priv->wstats;
-	int tmp_level = 0;
-	int tmp_qual = 0;
-	int tmp_noise = 0;
-
-	if (ieee->state < IEEE80211_LINKED)	{
-		wstats->qual.qual = 0;
-		wstats->qual.level = 0;
-		wstats->qual.noise = 0;
-		wstats->qual.updated = IW_QUAL_ALL_UPDATED | IW_QUAL_DBM;
-		return wstats;
-	}
-
-	tmp_level = (&ieee->current_network)->stats.signal;
-	tmp_qual = (&ieee->current_network)->stats.signalstrength;
-	tmp_noise = (&ieee->current_network)->stats.noise;
-
-	wstats->qual.level = tmp_level;
-	wstats->qual.qual = tmp_qual;
-	wstats->qual.noise = tmp_noise;
-	wstats->qual.updated = IW_QUAL_ALL_UPDATED | IW_QUAL_DBM;
-	return wstats;
-}
-
-struct iw_handler_def  r8180_wx_handlers_def = {
-	.standard = r8180_wx_handlers,
-	.num_standard = ARRAY_SIZE(r8180_wx_handlers),
-	.private = r8180_private_handler,
-	.num_private = ARRAY_SIZE(r8180_private_handler),
-	.num_private_args = sizeof(r8180_private_args) / sizeof(struct iw_priv_args),
-	.get_wireless_stats = r8180_get_wireless_stats,
-	.private_args = (struct iw_priv_args *)r8180_private_args,
-};
-
-
diff --git a/drivers/staging/rtl8187se/r8180_wx.h b/drivers/staging/rtl8187se/r8180_wx.h
deleted file mode 100644
index d471520ac772..000000000000
--- a/drivers/staging/rtl8187se/r8180_wx.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
-	This is part of rtl8180 OpenSource driver - v 0.3
-	Copyright (C) Andrea Merello 2004  <andrea.merello@gmail.com>
-	Released under the terms of GPL (General Public Licence)
-
-	Parts of this driver are based on the GPL part of the official realtek driver
-	Parts of this driver are based on the rtl8180 driver skeleton from Patric Schenke & Andres Salomon
-	Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver
-
-	We want to thanks the Authors of such projects and the Ndiswrapper project Authors.
-*/
-
-/* this file (will) contains wireless extension handlers*/
-
-#ifndef R8180_WX_H
-#define R8180_WX_H
-#include <linux/wireless.h>
-#include "ieee80211/ieee80211.h"
-extern struct iw_handler_def r8180_wx_handlers_def;
-
-#endif
diff --git a/drivers/staging/rtl8187se/r8185b_init.c b/drivers/staging/rtl8187se/r8185b_init.c
deleted file mode 100644
index cc6f100814f3..000000000000
--- a/drivers/staging/rtl8187se/r8185b_init.c
+++ /dev/null
@@ -1,1464 +0,0 @@
-/*
- * Copyright (c) Realtek Semiconductor Corp. All rights reserved.
- *
- * Module Name:
- *	r8185b_init.c
- *
- * Abstract:
- *	Hardware Initialization and Hardware IO for RTL8185B
- *
- * Major Change History:
- *	When		Who				What
- *	----------	---------------		-------------------------------
- *	2006-11-15	Xiong			Created
- *
- * Notes:
- *	This file is ported from RTL8185B Windows driver.
- *
- *
- */
-
-/*--------------------------Include File------------------------------------*/
-#include <linux/spinlock.h>
-#include "r8180_hw.h"
-#include "r8180.h"
-#include "r8180_rtl8225.h" /* RTL8225 Radio frontend */
-#include "r8180_93cx6.h"   /* Card EEPROM */
-#include "r8180_wx.h"
-#include "ieee80211/dot11d.h"
-/* #define CONFIG_RTL8180_IO_MAP */
-#define TC_3W_POLL_MAX_TRY_CNT 5
-
-static u8 MAC_REG_TABLE[][2] =	{
-	/*
-	 * PAGE 0:
-	 * 0x34(BRSR), 0xBE(RATE_FALLBACK_CTL), 0x1E0(ARFR) would set in
-	 * HwConfigureRTL8185()
-	 * 0x272(RFSW_CTRL), 0x1CE(AESMSK_QC) set in InitializeAdapter8185().
-	 * 0x1F0~0x1F8  set in MacConfig_85BASIC()
-	 */
-	{0x08, 0xae}, {0x0a, 0x72}, {0x5b, 0x42},
-	{0x84, 0x88}, {0x85, 0x24}, {0x88, 0x54}, {0x8b, 0xb8}, {0x8c, 0x03},
-	{0x8d, 0x40}, {0x8e, 0x00}, {0x8f, 0x00}, {0x5b, 0x18}, {0x91, 0x03},
-	{0x94, 0x0F}, {0x95, 0x32},
-	{0x96, 0x00}, {0x97, 0x07}, {0xb4, 0x22}, {0xdb, 0x00},
-	{0xf0, 0x32}, {0xf1, 0x32}, {0xf2, 0x00}, {0xf3, 0x00}, {0xf4, 0x32},
-	{0xf5, 0x43}, {0xf6, 0x00}, {0xf7, 0x00}, {0xf8, 0x46}, {0xf9, 0xa4},
-	{0xfa, 0x00}, {0xfb, 0x00}, {0xfc, 0x96}, {0xfd, 0xa4}, {0xfe, 0x00},
-	{0xff, 0x00},
-
-	/*
-	 * PAGE 1:
-	 * For Flextronics system Logo PCIHCT failure:
-	 * 0x1C4~0x1CD set no-zero value to avoid PCI configuration
-	 * space 0x45[7]=1
-	 */
-	{0x5e, 0x01},
-	{0x58, 0x00}, {0x59, 0x00}, {0x5a, 0x04}, {0x5b, 0x00}, {0x60, 0x24},
-	{0x61, 0x97}, {0x62, 0xF0}, {0x63, 0x09}, {0x80, 0x0F}, {0x81, 0xFF},
-	{0x82, 0xFF}, {0x83, 0x03},
-	/* lzm add 080826 */
-	{0xC4, 0x22}, {0xC5, 0x22}, {0xC6, 0x22}, {0xC7, 0x22}, {0xC8, 0x22},
-	/* lzm add 080826 */
-	{0xC9, 0x22}, {0xCA, 0x22}, {0xCB, 0x22}, {0xCC, 0x22}, {0xCD, 0x22},
-	{0xe2, 0x00},
-
-
-	/* PAGE 2: */
-	{0x5e, 0x02},
-	{0x0c, 0x04}, {0x4c, 0x30}, {0x4d, 0x08}, {0x50, 0x05}, {0x51, 0xf5},
-	{0x52, 0x04}, {0x53, 0xa0}, {0x54, 0xff}, {0x55, 0xff}, {0x56, 0xff},
-	{0x57, 0xff}, {0x58, 0x08}, {0x59, 0x08}, {0x5a, 0x08}, {0x5b, 0x08},
-	{0x60, 0x08}, {0x61, 0x08}, {0x62, 0x08}, {0x63, 0x08}, {0x64, 0x2f},
-	{0x8c, 0x3f}, {0x8d, 0x3f}, {0x8e, 0x3f},
-	{0x8f, 0x3f}, {0xc4, 0xff}, {0xc5, 0xff}, {0xc6, 0xff}, {0xc7, 0xff},
-	{0xc8, 0x00}, {0xc9, 0x00}, {0xca, 0x80}, {0xcb, 0x00},
-
-	/* PAGE 0: */
-	{0x5e, 0x00}, {0x9f, 0x03}
-	};
-
-
-static u8  ZEBRA_AGC[] = {
-	0,
-	0x7E, 0x7E, 0x7E, 0x7E, 0x7D, 0x7C, 0x7B, 0x7A, 0x79, 0x78, 0x77, 0x76,
-	0x75, 0x74, 0x73, 0x72, 0x71, 0x70, 0x6F, 0x6E, 0x6D, 0x6C, 0x6B, 0x6A,
-	0x69, 0x68, 0x67, 0x66, 0x65, 0x64, 0x63, 0x62, 0x48, 0x47, 0x46, 0x45,
-	0x44, 0x29, 0x28, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0x08, 0x07,
-	0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f,
-	0x0f, 0x0f, 0x10, 0x11, 0x12, 0x13, 0x15, 0x16, 0x17, 0x17, 0x18, 0x18,
-	0x19, 0x1a, 0x1a, 0x1b, 0x1b, 0x1c, 0x1c, 0x1d, 0x1d, 0x1d, 0x1e, 0x1e,
-	0x1f, 0x1f, 0x1f, 0x20, 0x20, 0x20, 0x20, 0x21, 0x21, 0x21, 0x22, 0x22,
-	0x22, 0x23, 0x23, 0x24, 0x24, 0x25, 0x25, 0x25, 0x26, 0x26, 0x27, 0x27,
-	0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F
-	};
-
-static u32 ZEBRA_RF_RX_GAIN_TABLE[] = {
-	0x0096, 0x0076, 0x0056, 0x0036, 0x0016, 0x01f6, 0x01d6, 0x01b6,
-	0x0196, 0x0176, 0x00F7, 0x00D7, 0x00B7, 0x0097, 0x0077, 0x0057,
-	0x0037, 0x00FB, 0x00DB, 0x00BB, 0x00FF, 0x00E3, 0x00C3, 0x00A3,
-	0x0083, 0x0063, 0x0043, 0x0023, 0x0003, 0x01E3, 0x01C3, 0x01A3,
-	0x0183, 0x0163, 0x0143, 0x0123, 0x0103
-	};
-
-static u8 OFDM_CONFIG[]	= {
-	/* OFDM reg0x06[7:0]=0xFF: Enable power saving mode in RX */
-	/* OFDM reg0x3C[4]=1'b1: Enable RX power saving mode */
-	/* ofdm 0x3a = 0x7b ,(original : 0xfb) For ECS shielding room TP test */
-	/* 0x00	*/
-	0x10, 0x0F, 0x0A, 0x0C, 0x14, 0xFA, 0xFF, 0x50,
-	0x00, 0x50, 0x00, 0x00, 0x00, 0x5C, 0x00, 0x00,
-	/* 0x10	*/
-	0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0xA8, 0x26,
-	0x32, 0x33, 0x06, 0xA5, 0x6F, 0x55, 0xC8, 0xBB,
-	/* 0x20	*/
-	0x0A, 0xE1, 0x2C, 0x4A, 0x86, 0x83, 0x34, 0x00,
-	0x4F, 0x24, 0x6F, 0xC2, 0x03, 0x40, 0x80, 0x00,
-	/* 0x30	*/
-	0xC0, 0xC1, 0x58, 0xF1, 0x00, 0xC4, 0x90, 0x3e,
-	0xD8, 0x3C, 0x7B, 0x10, 0x10
-	};
-
-	/*---------------------------------------------------------------
-	 *	Hardware IO
-	 *	the code is ported from Windows source code
-	 *---------------------------------------------------------------
-	 */
-
-static u8 PlatformIORead1Byte(struct net_device *dev, u32 offset)
-{
-	return read_nic_byte(dev, offset);
-}
-
-static void PlatformIOWrite1Byte(struct net_device *dev, u32 offset, u8 data)
-{
-	write_nic_byte(dev, offset, data);
-	/*
-	 * To make sure write operation is completed,
-	 * 2005.11.09, by rcnjko.
-	 */
-	read_nic_byte(dev, offset);
-}
-
-static void PlatformIOWrite2Byte(struct net_device *dev, u32 offset, u16 data)
-{
-	write_nic_word(dev, offset, data);
-	/*
-	 * To make sure write operation is completed,
-	 *  2005.11.09, by rcnjko.
-	 */
-	read_nic_word(dev, offset);
-}
-
-static void PlatformIOWrite4Byte(struct net_device *dev, u32 offset, u32 data)
-{
-	if (offset == PhyAddr) {
-		/* For Base Band configuration. */
-		unsigned char	cmdByte;
-		unsigned long	dataBytes;
-		unsigned char	idx;
-		u8		u1bTmp;
-
-		cmdByte = (u8)(data & 0x000000ff);
-		dataBytes = data>>8;
-
-		/*
-		 *	071010, rcnjko:
-		 *	The critical section is only BB read/write race
-		 *	condition. Assumption:
-		 *	1. We assume NO one will access BB at DIRQL, otherwise,
-		 *	system will crash for
-		 *	acquiring the spinlock in such context.
-		 *	2. PlatformIOWrite4Byte() MUST NOT be recursive.
-		 */
-		/* NdisAcquireSpinLock( &(pDevice->IoSpinLock) ); */
-
-		for (idx = 0; idx < 30; idx++) {
-			/* Make sure command bit is clear before access it. */
-			u1bTmp = PlatformIORead1Byte(dev, PhyAddr);
-			if ((u1bTmp & BIT7) == 0)
-				break;
-			else
-				mdelay(10);
-		}
-
-		for (idx = 0; idx < 3; idx++)
-			PlatformIOWrite1Byte(dev, offset+1+idx,
-					     ((u8 *)&dataBytes)[idx]);
-
-		write_nic_byte(dev, offset, cmdByte);
-
-		/* NdisReleaseSpinLock( &(pDevice->IoSpinLock) ); */
-	} else {
-		write_nic_dword(dev, offset, data);
-		/*
-		 * To make sure write operation is completed, 2005.11.09,
-		 *  by rcnjko.
-		 */
-		read_nic_dword(dev, offset);
-	}
-}
-
-static void SetOutputEnableOfRfPins(struct net_device *dev)
-{
-	write_nic_word(dev, RFPinsEnable, 0x1bff);
-}
-
-static bool HwHSSIThreeWire(struct net_device *dev,
-			    u8 *pDataBuf,
-			    bool write)
-{
-	u8	TryCnt;
-	u8	u1bTmp;
-
-	/* Check if WE and RE are cleared. */
-	for (TryCnt = 0; TryCnt < TC_3W_POLL_MAX_TRY_CNT; TryCnt++) {
-		u1bTmp = read_nic_byte(dev, SW_3W_CMD1);
-		if ((u1bTmp & (SW_3W_CMD1_RE|SW_3W_CMD1_WE)) == 0)
-			break;
-
-		udelay(10);
-	}
-	if (TryCnt == TC_3W_POLL_MAX_TRY_CNT) {
-		netdev_err(dev,
-			   "HwThreeWire(): CmdReg: %#X RE|WE bits are not clear!!\n",
-			   u1bTmp);
-	return false;
-	}
-
-	/* RTL8187S HSSI Read/Write Function */
-	u1bTmp = read_nic_byte(dev, RF_SW_CONFIG);
-	u1bTmp |= RF_SW_CFG_SI; /* reg08[1]=1 Serial Interface(SI) */
-	write_nic_byte(dev, RF_SW_CONFIG, u1bTmp);
-
-	/* jong: HW SI read must set reg84[3]=0. */
-	u1bTmp = read_nic_byte(dev, RFPinsSelect);
-	u1bTmp &= ~BIT3;
-	write_nic_byte(dev, RFPinsSelect, u1bTmp);
-	/*  Fill up data buffer for write operation. */
-
-	/* SI - reg274[3:0] : RF register's Address */
-	if (write)
-		write_nic_word(dev, SW_3W_DB0, *((u16 *)pDataBuf));
-	else
-		write_nic_word(dev, SW_3W_DB0, *((u16 *)pDataBuf));
-
-	/* Set up command: WE or RE. */
-	if (write)
-		write_nic_byte(dev, SW_3W_CMD1, SW_3W_CMD1_WE);
-	else
-		write_nic_byte(dev, SW_3W_CMD1, SW_3W_CMD1_RE);
-
-
-	/* Check if DONE is set. */
-	for (TryCnt = 0; TryCnt < TC_3W_POLL_MAX_TRY_CNT; TryCnt++) {
-		u1bTmp = read_nic_byte(dev, SW_3W_CMD1);
-		if (u1bTmp & SW_3W_CMD1_DONE)
-			break;
-
-		udelay(10);
-	}
-
-	write_nic_byte(dev, SW_3W_CMD1, 0);
-
-	/* Read back data for read operation. */
-	if (!write) {
-		/* Serial Interface : reg363_362[11:0] */
-		*((u16 *)pDataBuf) = read_nic_word(dev, SI_DATA_READ);
-		*((u16 *)pDataBuf) &= 0x0FFF;
-	}
-
-	return true;
-}
-
-void RF_WriteReg(struct net_device *dev, u8 offset, u16 data)
-{
-	u16 reg = (data << 4) | (offset & 0x0f);
-	HwHSSIThreeWire(dev, (u8 *)&reg, true);
-}
-
-u16 RF_ReadReg(struct net_device *dev, u8 offset)
-{
-	u16 reg = offset & 0x0f;
-	HwHSSIThreeWire(dev, (u8 *)&reg, false);
-	return reg;
-}
-
-static u8 ReadBBPortUchar(struct net_device *dev, u32 addr)
-{
-	PlatformIOWrite4Byte(dev, PhyAddr, addr & 0xffffff7f);
-	return PlatformIORead1Byte(dev, PhyDataR);
-}
-
-/* by Owen on 04/07/14 for writing BB register successfully */
-static void WriteBBPortUchar(struct net_device *dev, u32 Data)
-{
-	PlatformIOWrite4Byte(dev, PhyAddr, Data);
-	ReadBBPortUchar(dev, Data);
-}
-
-/*
- *	Description:
- *	Perform Antenna settings with antenna diversity on 87SE.
- *		Created by Roger, 2008.01.25.
- */
-bool SetAntennaConfig87SE(struct net_device *dev,
-			  u8   DefaultAnt, /* 0: Main, 1: Aux. */
-			  bool bAntDiversity) /* 1:Enable, 0: Disable. */
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	bool   bAntennaSwitched = true;
-	/* 0x00 = disabled, 0x80 = enabled */
-	u8	ant_diversity_offset = 0x00;
-
-	/*
-	 * printk("SetAntennaConfig87SE(): DefaultAnt(%d), bAntDiversity(%d)\n",
-	 * DefaultAnt, bAntDiversity);
-	 */
-
-	/* Threshold for antenna diversity. */
-	write_phy_cck(dev, 0x0c, 0x09); /* Reg0c : 09 */
-
-	if (bAntDiversity)	/*	Enable Antenna Diversity. */
-		ant_diversity_offset = 0x80;
-
-	if (DefaultAnt == 1) { /* aux Antenna */
-		/* Mac register, aux antenna */
-		write_nic_byte(dev, ANTSEL, 0x00);
-
-		/* Config CCK RX antenna. */
-		write_phy_cck(dev, 0x11, 0xbb); /* Reg11 : bb */
-
-		/* Reg01 : 47 | ant_diversity_offset */
-		write_phy_cck(dev, 0x01, 0x47|ant_diversity_offset);
-
-		/* Config OFDM RX antenna. */
-		write_phy_ofdm(dev, 0x0D, 0x54);	/* Reg0d : 54 */
-		/* Reg18 : 32 */
-		write_phy_ofdm(dev, 0x18, 0x32|ant_diversity_offset);
-	} else { /* main Antenna */
-		/* Mac register, main antenna */
-		write_nic_byte(dev, ANTSEL, 0x03);
-
-		/* Config CCK RX antenna.	*/
-		write_phy_cck(dev, 0x11, 0x9b); /* Reg11 : 9b */
-		/* Reg01 : 47 */
-		write_phy_cck(dev, 0x01, 0x47|ant_diversity_offset);
-
-		/* Config OFDM RX antenna. */
-		write_phy_ofdm(dev, 0x0D, 0x5c); /* Reg0d : 5c */
-		/*Reg18 : 32 */
-		write_phy_ofdm(dev, 0x18, 0x32|ant_diversity_offset);
-	}
-	priv->CurrAntennaIndex = DefaultAnt; /* Update default settings. */
-	return	bAntennaSwitched;
-}
-/*
- *--------------------------------------------------------------
- *		Hardware Initialization.
- *		the code is ported from Windows source code
- *--------------------------------------------------------------
- */
-
-static void ZEBRA_Config_85BASIC_HardCode(struct net_device *dev)
-{
-
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	u32			i;
-	u32	addr, data;
-	u32 u4bRegOffset, u4bRegValue;
-	u16 u4bRF23, u4bRF24;
-	u8			u1b24E;
-	int d_cut = 0;
-
-
-/*
- *===========================================================================
- *	87S_PCIE :: RADIOCFG.TXT
- *===========================================================================
- */
-
-
-	/* Page1 : reg16-reg30 */
-	RF_WriteReg(dev, 0x00, 0x013f);		mdelay(1); /* switch to page1 */
-	u4bRF23 = RF_ReadReg(dev, 0x08);	mdelay(1);
-	u4bRF24 = RF_ReadReg(dev, 0x09);	mdelay(1);
-
-	if (u4bRF23 == 0x818 && u4bRF24 == 0x70C) {
-		d_cut = 1;
-		netdev_info(dev, "card type changed from C- to D-cut\n");
-	}
-
-	/* Page0 : reg0-reg15 */
-
-	RF_WriteReg(dev, 0x00, 0x009f);		mdelay(1);/* 1	*/
-	RF_WriteReg(dev, 0x01, 0x06e0);		mdelay(1);
-	RF_WriteReg(dev, 0x02, 0x004d);		mdelay(1);/* 2	*/
-	RF_WriteReg(dev, 0x03, 0x07f1);		mdelay(1);/* 3	*/
-	RF_WriteReg(dev, 0x04, 0x0975);		mdelay(1);
-	RF_WriteReg(dev, 0x05, 0x0c72);		mdelay(1);
-	RF_WriteReg(dev, 0x06, 0x0ae6);		mdelay(1);
-	RF_WriteReg(dev, 0x07, 0x00ca);		mdelay(1);
-	RF_WriteReg(dev, 0x08, 0x0e1c);		mdelay(1);
-	RF_WriteReg(dev, 0x09, 0x02f0);		mdelay(1);
-	RF_WriteReg(dev, 0x0a, 0x09d0);		mdelay(1);
-	RF_WriteReg(dev, 0x0b, 0x01ba);		mdelay(1);
-	RF_WriteReg(dev, 0x0c, 0x0640);		mdelay(1);
-	RF_WriteReg(dev, 0x0d, 0x08df);		mdelay(1);
-	RF_WriteReg(dev, 0x0e, 0x0020);		mdelay(1);
-	RF_WriteReg(dev, 0x0f, 0x0990);		mdelay(1);
-
-	/*  Page1 : reg16-reg30 */
-	RF_WriteReg(dev, 0x00, 0x013f);		mdelay(1);
-	RF_WriteReg(dev, 0x03, 0x0806);		mdelay(1);
-	RF_WriteReg(dev, 0x04, 0x03a7);		mdelay(1);
-	RF_WriteReg(dev, 0x05, 0x059b);		mdelay(1);
-	RF_WriteReg(dev, 0x06, 0x0081);		mdelay(1);
-	RF_WriteReg(dev, 0x07, 0x01A0);		mdelay(1);
-/*
- * Don't write RF23/RF24 to make a difference between 87S C cut and D cut.
- * asked by SD3 stevenl.
- */
-	RF_WriteReg(dev, 0x0a, 0x0001);		mdelay(1);
-	RF_WriteReg(dev, 0x0b, 0x0418);		mdelay(1);
-
-	if (d_cut) {
-		RF_WriteReg(dev, 0x0c, 0x0fbe);		mdelay(1);
-		RF_WriteReg(dev, 0x0d, 0x0008);		mdelay(1);
-		/* RX LO buffer */
-		RF_WriteReg(dev, 0x0e, 0x0807);		mdelay(1);
-	} else {
-		RF_WriteReg(dev, 0x0c, 0x0fbe);		mdelay(1);
-		RF_WriteReg(dev, 0x0d, 0x0008);		mdelay(1);
-		/* RX LO buffer */
-		RF_WriteReg(dev, 0x0e, 0x0806);		mdelay(1);
-	}
-
-	RF_WriteReg(dev, 0x0f, 0x0acc);		mdelay(1);
-	RF_WriteReg(dev, 0x00, 0x01d7);		mdelay(1); /* 6 */
-	RF_WriteReg(dev, 0x03, 0x0e00);		mdelay(1);
-	RF_WriteReg(dev, 0x04, 0x0e50);		mdelay(1);
-
-	for (i = 0; i <= 36; i++) {
-		RF_WriteReg(dev, 0x01, i);		mdelay(1);
-		RF_WriteReg(dev, 0x02, ZEBRA_RF_RX_GAIN_TABLE[i]); mdelay(1);
-	}
-
-	RF_WriteReg(dev, 0x05, 0x0203);		mdelay(1); /* 203, 343 */
-	RF_WriteReg(dev, 0x06, 0x0200);		mdelay(1); /* 400 */
-	/* switch to reg16-reg30, and HSSI disable 137 */
-	RF_WriteReg(dev, 0x00, 0x0137);		mdelay(1);
-	mdelay(10); /* Deay 10 ms. */		/* 0xfd */
-
-	/* Z4 synthesizer loop filter setting, 392 */
-	RF_WriteReg(dev, 0x0d, 0x0008);		mdelay(1);
-	mdelay(10); /* Deay 10 ms. */		/* 0xfd */
-
-	/* switch to reg0-reg15, and HSSI disable */
-	RF_WriteReg(dev, 0x00, 0x0037);		mdelay(1);
-	mdelay(10); /* Deay 10 ms. */		/* 0xfd	*/
-
-	/* CBC on, Tx Rx disable, High gain */
-	RF_WriteReg(dev, 0x04, 0x0160);		mdelay(1);
-	mdelay(10); /* Deay 10 ms. */		/* 0xfd	*/
-
-	/* Z4 setted channel 1 */
-	RF_WriteReg(dev, 0x07, 0x0080);		mdelay(1);
-	mdelay(10); /* Deay 10 ms. */		/* 0xfd	*/
-
-	RF_WriteReg(dev, 0x02, 0x088D);		mdelay(1); /* LC calibration */
-	mdelay(200); /* Deay 200 ms. */		/* 0xfd	*/
-	mdelay(10);  /* Deay 10 ms. */		/* 0xfd	*/
-	mdelay(10);  /* Deay 10 ms. */		/* 0xfd	*/
-
-	/* switch to reg16-reg30 137, and HSSI disable 137 */
-	RF_WriteReg(dev, 0x00, 0x0137);		mdelay(1);
-	mdelay(10); /* Deay 10 ms. */		/* 0xfd	*/
-
-	RF_WriteReg(dev, 0x07, 0x0000);		mdelay(1);
-	RF_WriteReg(dev, 0x07, 0x0180);		mdelay(1);
-	RF_WriteReg(dev, 0x07, 0x0220);		mdelay(1);
-	RF_WriteReg(dev, 0x07, 0x03E0);		mdelay(1);
-
-	/* DAC calibration off 20070702	*/
-	RF_WriteReg(dev, 0x06, 0x00c1);		mdelay(1);
-	RF_WriteReg(dev, 0x0a, 0x0001);		mdelay(1);
-	/* For crystal calibration, added by Roger, 2007.12.11. */
-	if (priv->bXtalCalibration) { /* reg 30.	*/
-	 /*
-	  *	enable crystal calibration.
-	  *	RF Reg[30], (1)Xin:[12:9], Xout:[8:5],  addr[4:0].
-	  *	(2)PA Pwr delay timer[15:14], default: 2.4us,
-	  *	set BIT15=0
-	  *	(3)RF signal on/off when calibration[13], default: on,
-	  *	set BIT13=0.
-	  *	So we should minus 4 BITs offset.
-	  */
-		RF_WriteReg(dev, 0x0f, (priv->XtalCal_Xin<<5) |
-			    (priv->XtalCal_Xout<<1) | BIT11 | BIT9); mdelay(1);
-		netdev_info(dev, "ZEBRA_Config_85BASIC_HardCode(): (%02x)\n",
-		      (priv->XtalCal_Xin<<5) | (priv->XtalCal_Xout<<1) |
-		       BIT11 | BIT9);
-	} else {
-		/* using default value. Xin=6, Xout=6.	*/
-		RF_WriteReg(dev, 0x0f, 0x0acc);		mdelay(1);
-	}
-	/* switch to reg0-reg15, and HSSI enable */
-	RF_WriteReg(dev, 0x00, 0x00bf);		mdelay(1);
-	/* Rx BB start calibration, 00c//+edward */
-	RF_WriteReg(dev, 0x0d, 0x08df);		mdelay(1);
-	/* temperature meter off */
-	RF_WriteReg(dev, 0x02, 0x004d);		mdelay(1);
-	RF_WriteReg(dev, 0x04, 0x0975);		mdelay(1); /* Rx mode */
-	mdelay(10);	/* Deay 10 ms.*/	/* 0xfe	*/
-	mdelay(10);	/* Deay 10 ms.*/	/* 0xfe	*/
-	mdelay(10);	/* Deay 10 ms.*/	/* 0xfe	*/
-	/* Rx mode*/	/*+edward */
-	RF_WriteReg(dev, 0x00, 0x0197);		mdelay(1);
-	/* Rx mode*/	/*+edward */
-	RF_WriteReg(dev, 0x05, 0x05ab);		mdelay(1);
-	/* Rx mode*/	/*+edward */
-	RF_WriteReg(dev, 0x00, 0x009f);		mdelay(1);
-	/* Rx mode*/	/*+edward */
-	RF_WriteReg(dev, 0x01, 0x0000);		mdelay(1);
-	/* Rx mode*/	/*+edward */
-	RF_WriteReg(dev, 0x02, 0x0000);		mdelay(1);
-	/* power save parameters. */
-	u1b24E = read_nic_byte(dev, 0x24E);
-	write_nic_byte(dev, 0x24E, (u1b24E & (~(BIT5|BIT6))));
-
-	/*======================================================================
-	 *
-	 *======================================================================
-	 * CCKCONF.TXT
-	 *======================================================================
-	 *
-	 *	[POWER SAVE] Power Saving Parameters by jong. 2007-11-27
-	 *	CCK reg0x00[7]=1'b1 :power saving for TX (default)
-	 *	CCK reg0x00[6]=1'b1: power saving for RX (default)
-	 *	CCK reg0x06[4]=1'b1: turn off channel estimation related
-	 *	circuits if not doing channel estimation.
-	 *	CCK reg0x06[3]=1'b1: turn off unused circuits before cca = 1
-	 *	CCK reg0x06[2]=1'b1: turn off cck's circuit if macrst =0
-	 */
-
-	write_phy_cck(dev, 0x00, 0xc8);
-	write_phy_cck(dev, 0x06, 0x1c);
-	write_phy_cck(dev, 0x10, 0x78);
-	write_phy_cck(dev, 0x2e, 0xd0);
-	write_phy_cck(dev, 0x2f, 0x06);
-	write_phy_cck(dev, 0x01, 0x46);
-
-	/* power control */
-	write_nic_byte(dev, CCK_TXAGC, 0x10);
-	write_nic_byte(dev, OFDM_TXAGC, 0x1B);
-	write_nic_byte(dev, ANTSEL, 0x03);
-
-
-
-	/*
-	 *======================================================================
-	 *	AGC.txt
-	 *======================================================================
-	 */
-
-	write_phy_ofdm(dev, 0x00, 0x12);
-
-	for (i = 0; i < 128; i++) {
-
-		data = ZEBRA_AGC[i+1];
-		data = data << 8;
-		data = data | 0x0000008F;
-
-		addr = i + 0x80; /* enable writing AGC table */
-		addr = addr << 8;
-		addr = addr | 0x0000008E;
-
-		WriteBBPortUchar(dev, data);
-		WriteBBPortUchar(dev, addr);
-		WriteBBPortUchar(dev, 0x0000008E);
-	}
-
-	PlatformIOWrite4Byte(dev, PhyAddr, 0x00001080);	/* Annie, 2006-05-05 */
-
-	/*
-	 *======================================================================
-	 *
-	 *======================================================================
-	 * OFDMCONF.TXT
-	 *======================================================================
-	 */
-
-	for (i = 0; i < 60; i++) {
-		u4bRegOffset = i;
-		u4bRegValue = OFDM_CONFIG[i];
-
-		WriteBBPortUchar(dev,
-				(0x00000080 |
-				(u4bRegOffset & 0x7f) |
-				((u4bRegValue & 0xff) << 8)));
-	}
-
-	/*
-	 *======================================================================
-	 * by amy for antenna
-	 *======================================================================
-	 */
-	/*
-	 * Config Sw/Hw  Combinational Antenna Diversity. Added by Roger,
-	 * 2008.02.26.
-	 */
-	SetAntennaConfig87SE(dev, priv->bDefaultAntenna1,
-			     priv->bSwAntennaDiverity);
-}
-
-
-void UpdateInitialGain(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
-	/* lzm add 080826 */
-	if (priv->eRFPowerState != RF_ON) {
-		/*	Don't access BB/RF under disable PLL situation.
-		 *	RT_TRACE(COMP_DIG, DBG_LOUD, ("UpdateInitialGain -
-		 *	pHalData->eRFPowerState!=RF_ON\n"));
-		 *	Back to the original state
-		 */
-		priv->InitialGain = priv->InitialGainBackUp;
-		return;
-	}
-
-	switch (priv->InitialGain) {
-	case 1: /* m861dBm */
-		write_phy_ofdm(dev, 0x17, 0x26);	mdelay(1);
-		write_phy_ofdm(dev, 0x24, 0x86);	mdelay(1);
-		write_phy_ofdm(dev, 0x05, 0xfa);	mdelay(1);
-		break;
-
-	case 2: /* m862dBm */
-		write_phy_ofdm(dev, 0x17, 0x36);	mdelay(1);
-		write_phy_ofdm(dev, 0x24, 0x86);	mdelay(1);
-		write_phy_ofdm(dev, 0x05, 0xfa);	mdelay(1);
-		break;
-
-	case 3: /* m863dBm */
-		write_phy_ofdm(dev, 0x17, 0x36);	mdelay(1);
-		write_phy_ofdm(dev, 0x24, 0x86);	mdelay(1);
-		write_phy_ofdm(dev, 0x05, 0xfb);	mdelay(1);
-		break;
-
-	case 4: /* m864dBm */
-		write_phy_ofdm(dev, 0x17, 0x46);	mdelay(1);
-		write_phy_ofdm(dev, 0x24, 0x86);	mdelay(1);
-		write_phy_ofdm(dev, 0x05, 0xfb);	mdelay(1);
-		break;
-
-	case 5: /* m82dBm */
-		write_phy_ofdm(dev, 0x17, 0x46);	mdelay(1);
-		write_phy_ofdm(dev, 0x24, 0x96);	mdelay(1);
-		write_phy_ofdm(dev, 0x05, 0xfb);	mdelay(1);
-		break;
-
-	case 6: /* m78dBm */
-		write_phy_ofdm(dev, 0x17, 0x56);	mdelay(1);
-		write_phy_ofdm(dev, 0x24, 0x96);	mdelay(1);
-		write_phy_ofdm(dev, 0x05, 0xfc);	mdelay(1);
-		break;
-
-	case 7: /* m74dBm */
-		write_phy_ofdm(dev, 0x17, 0x56);	mdelay(1);
-		write_phy_ofdm(dev, 0x24, 0xa6);	mdelay(1);
-		write_phy_ofdm(dev, 0x05, 0xfc);	mdelay(1);
-		break;
-
-	case 8:
-		write_phy_ofdm(dev, 0x17, 0x66);	mdelay(1);
-		write_phy_ofdm(dev, 0x24, 0xb6);	mdelay(1);
-		write_phy_ofdm(dev, 0x05, 0xfc);	mdelay(1);
-		break;
-
-	default: /* MP */
-		write_phy_ofdm(dev, 0x17, 0x26);	mdelay(1);
-		write_phy_ofdm(dev, 0x24, 0x86);	mdelay(1);
-		write_phy_ofdm(dev, 0x05, 0xfa);	mdelay(1);
-		break;
-	}
-}
-/*
- *	Description:
- *		Tx Power tracking mechanism routine on 87SE.
- *	Created by Roger, 2007.12.11.
- */
-static void InitTxPwrTracking87SE(struct net_device *dev)
-{
-	u32	u4bRfReg;
-
-	u4bRfReg = RF_ReadReg(dev, 0x02);
-
-	/* Enable Thermal meter indication.	*/
-	RF_WriteReg(dev, 0x02, u4bRfReg|PWR_METER_EN);		mdelay(1);
-}
-
-static void PhyConfig8185(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-		write_nic_dword(dev, RCR, priv->ReceiveConfig);
-	   priv->RFProgType = read_nic_byte(dev, CONFIG4) & 0x03;
-	/*  RF config */
-	ZEBRA_Config_85BASIC_HardCode(dev);
-	/* Set default initial gain state to 4, approved by SD3 DZ, by Bruce,
-	 * 2007-06-06.
-	 */
-	if (priv->bDigMechanism) {
-		if (priv->InitialGain == 0)
-			priv->InitialGain = 4;
-	}
-
-	/*
-	 *	Enable thermal meter indication to implement TxPower tracking
-	 *	on 87SE. We initialize thermal meter here to avoid unsuccessful
-	 *	configuration. Added by Roger, 2007.12.11.
-	 */
-	if (priv->bTxPowerTrack)
-		InitTxPwrTracking87SE(dev);
-
-	priv->InitialGainBackUp = priv->InitialGain;
-	UpdateInitialGain(dev);
-
-	return;
-}
-
-static void HwConfigureRTL8185(struct net_device *dev)
-{
-	/*
-	 * RTL8185_TODO: Determine Retrylimit, TxAGC,
-	 * AutoRateFallback control.
-	 */
-	u8 bUNIVERSAL_CONTROL_RL = 0;
-	u8 bUNIVERSAL_CONTROL_AGC = 1;
-	u8 bUNIVERSAL_CONTROL_ANT = 1;
-	u8 bAUTO_RATE_FALLBACK_CTL = 1;
-	u8 val8;
-	write_nic_word(dev, BRSR, 0x0fff);
-	/* Retry limit */
-	val8 = read_nic_byte(dev, CW_CONF);
-
-	if (bUNIVERSAL_CONTROL_RL)
-		val8 = val8 & 0xfd;
-	else
-		val8 = val8 | 0x02;
-
-	write_nic_byte(dev, CW_CONF, val8);
-
-	/* Tx AGC */
-	val8 = read_nic_byte(dev, TXAGC_CTL);
-	if (bUNIVERSAL_CONTROL_AGC) {
-		write_nic_byte(dev, CCK_TXAGC, 128);
-		write_nic_byte(dev, OFDM_TXAGC, 128);
-		val8 = val8 & 0xfe;
-	} else {
-		val8 = val8 | 0x01;
-	}
-
-
-	write_nic_byte(dev, TXAGC_CTL, val8);
-
-	/* Tx Antenna including Feedback control */
-	val8 = read_nic_byte(dev, TXAGC_CTL);
-
-	if (bUNIVERSAL_CONTROL_ANT) {
-		write_nic_byte(dev, ANTSEL, 0x00);
-		val8 = val8 & 0xfd;
-	} else {
-		val8 = val8 & (val8|0x02); /* xiong-2006-11-15 */
-	}
-
-	write_nic_byte(dev, TXAGC_CTL, val8);
-
-	/* Auto Rate fallback control	*/
-	val8 = read_nic_byte(dev, RATE_FALLBACK);
-	val8 &= 0x7c;
-	if (bAUTO_RATE_FALLBACK_CTL) {
-		val8 |= RATE_FALLBACK_CTL_ENABLE | RATE_FALLBACK_CTL_AUTO_STEP1;
-
-		/* <RJ_TODO_8185B> We shall set up the ARFR according
-		 * to user's setting.
-		 */
-		PlatformIOWrite2Byte(dev, ARFR, 0x0fff); /* set 1M ~ 54Mbps. */
-	}
-	write_nic_byte(dev, RATE_FALLBACK, val8);
-}
-
-static void MacConfig_85BASIC_HardCode(struct net_device *dev)
-{
-	/*
-	 *======================================================================
-	 * MACREG.TXT
-	 *======================================================================
-	 */
-	int nLinesRead = 0;
-	u32 u4bRegOffset, u4bRegValue, u4bPageIndex = 0;
-	int i;
-
-	nLinesRead = sizeof(MAC_REG_TABLE)/2;
-
-	for (i = 0; i < nLinesRead; i++) { /* nLinesRead=101 */
-		u4bRegOffset = MAC_REG_TABLE[i][0];
-		u4bRegValue = MAC_REG_TABLE[i][1];
-
-				if (u4bRegOffset == 0x5e)
-					u4bPageIndex = u4bRegValue;
-				else
-					u4bRegOffset |= (u4bPageIndex << 8);
-
-		write_nic_byte(dev, u4bRegOffset, (u8)u4bRegValue);
-	}
-	/* ================================================================= */
-}
-
-static void MacConfig_85BASIC(struct net_device *dev)
-{
-
-	u8			u1DA;
-	MacConfig_85BASIC_HardCode(dev);
-
-	/* ================================================================= */
-
-	/* Follow TID_AC_MAP of WMac. */
-	write_nic_word(dev, TID_AC_MAP, 0xfa50);
-
-	/* Interrupt Migration, Jong suggested we use set 0x0000 first,
-	 * 2005.12.14, by rcnjko.
-	 */
-	write_nic_word(dev, IntMig, 0x0000);
-
-	/* Prevent TPC to cause CRC error. Added by Annie, 2006-06-10. */
-	PlatformIOWrite4Byte(dev, 0x1F0, 0x00000000);
-	PlatformIOWrite4Byte(dev, 0x1F4, 0x00000000);
-	PlatformIOWrite1Byte(dev, 0x1F8, 0x00);
-
-	/* Asked for by SD3 CM Lin, 2006.06.27, by rcnjko. */
-
-	/*
-	 *  power save parameter based on
-	 * "87SE power save parameters 20071127.doc", as follow.
-	 */
-
-	/* Enable DA10 TX power saving */
-	u1DA = read_nic_byte(dev, PHYPR);
-	write_nic_byte(dev, PHYPR, (u1DA | BIT2));
-
-	/* POWER: */
-	write_nic_word(dev, 0x360, 0x1000);
-	write_nic_word(dev, 0x362, 0x1000);
-
-	/* AFE. */
-	write_nic_word(dev, 0x370, 0x0560);
-	write_nic_word(dev, 0x372, 0x0560);
-	write_nic_word(dev, 0x374, 0x0DA4);
-	write_nic_word(dev, 0x376, 0x0DA4);
-	write_nic_word(dev, 0x378, 0x0560);
-	write_nic_word(dev, 0x37A, 0x0560);
-	write_nic_word(dev, 0x37C, 0x00EC);
-	write_nic_word(dev, 0x37E, 0x00EC); /* +edward */
-	write_nic_byte(dev, 0x24E, 0x01);
-}
-
-static u8 GetSupportedWirelessMode8185(struct net_device *dev)
-{
-	return WIRELESS_MODE_B | WIRELESS_MODE_G;
-}
-
-static void
-ActUpdateChannelAccessSetting(struct net_device *dev,
-			      enum wireless_mode mode,
-			      struct chnl_access_setting *chnl_access_setting)
-{
-	AC_CODING	eACI;
-
-	/*
-	 *	<RJ_TODO_8185B>
-	 *	TODO: We still don't know how to set up these registers,
-	 *	just follow WMAC to verify 8185B FPAG.
-	 *
-	 *	<RJ_TODO_8185B>
-	 *	Jong said CWmin/CWmax register are not functional in 8185B,
-	 *	so we shall fill channel access realted register into AC
-	 *	parameter registers,
-	 *	even in nQBss.
-	 */
-
-	/* Suggested by Jong, 2005.12.08. */
-	chnl_access_setting->sifs_timer = 0x22;
-	chnl_access_setting->difs_timer = 0x1C; /* 2006.06.02, by rcnjko. */
-	chnl_access_setting->slot_time_timer = 9; /* 2006.06.02, by rcnjko. */
-	/*
-	 * Suggested by wcchu, it is the default value of EIFS register,
-	 * 2005.12.08.
-	 */
-	chnl_access_setting->eifs_timer = 0x5B;
-	chnl_access_setting->cwmin_index = 3; /* 2006.06.02, by rcnjko. */
-	chnl_access_setting->cwmax_index = 7; /* 2006.06.02, by rcnjko. */
-
-	write_nic_byte(dev, SIFS, chnl_access_setting->sifs_timer);
-	/*
-	 * Rewrited from directly use PlatformEFIOWrite1Byte(),
-	 * by Annie, 2006-03-29.
-	 */
-	write_nic_byte(dev, SLOT, chnl_access_setting->slot_time_timer);
-
-	write_nic_byte(dev, EIFS, chnl_access_setting->eifs_timer);
-
-	/*
-	 * <RJ_EXPR_QOS> Suggested by wcchu, it is the default value of EIFS
-	 * register, 2005.12.08.
-	 */
-	write_nic_byte(dev, AckTimeOutReg, 0x5B);
-
-	for (eACI = 0; eACI < AC_MAX; eACI++)
-		write_nic_byte(dev, ACM_CONTROL, 0);
-}
-
-static void ActSetWirelessMode8185(struct net_device *dev, u8 btWirelessMode)
-{
-	struct  r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	struct  ieee80211_device *ieee = priv->ieee80211;
-	u8	btSupportedWirelessMode = GetSupportedWirelessMode8185(dev);
-
-	if ((btWirelessMode & btSupportedWirelessMode) == 0)	{
-		/*
-		 * Don't switch to unsupported wireless mode, 2006.02.15,
-		 * by rcnjko.
-		 */
-		DMESGW("ActSetWirelessMode8185(): WirelessMode(%d) is not supported (%d)!\n",
-			btWirelessMode, btSupportedWirelessMode);
-		return;
-	}
-
-	/* 1. Assign wireless mode to switch if necessary. */
-	if (btWirelessMode == WIRELESS_MODE_AUTO) {
-		if ((btSupportedWirelessMode & WIRELESS_MODE_A)) {
-			btWirelessMode = WIRELESS_MODE_A;
-		} else if (btSupportedWirelessMode & WIRELESS_MODE_G) {
-				btWirelessMode = WIRELESS_MODE_G;
-
-		} else if ((btSupportedWirelessMode & WIRELESS_MODE_B))	{
-				btWirelessMode = WIRELESS_MODE_B;
-		} else {
-			DMESGW("ActSetWirelessMode8185(): No valid wireless mode supported, btSupportedWirelessMode(%x)!!!\n",
-			       btSupportedWirelessMode);
-			btWirelessMode = WIRELESS_MODE_B;
-		}
-	}
-
-	/*
-	 * 2. Swtich band: RF or BB specific actions,
-	 * for example, refresh tables in omc8255, or change initial gain if
-	 * necessary. Nothing to do for Zebra to switch band. Update current
-	 * wireless mode if we switch to specified band successfully.
-	 */
-
-	ieee->mode = (enum wireless_mode)btWirelessMode;
-
-	/* 3. Change related setting. */
-	if (ieee->mode == WIRELESS_MODE_A)
-		DMESG("WIRELESS_MODE_A\n");
-	else if (ieee->mode == WIRELESS_MODE_B)
-		DMESG("WIRELESS_MODE_B\n");
-	else if (ieee->mode == WIRELESS_MODE_G)
-		DMESG("WIRELESS_MODE_G\n");
-
-	ActUpdateChannelAccessSetting(dev, ieee->mode,
-				      &priv->ChannelAccessSetting);
-}
-
-void rtl8185b_irq_enable(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
-	priv->irq_enabled = 1;
-	write_nic_dword(dev, IMR, priv->IntrMask);
-}
-
-static void MgntDisconnectIBSS(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	u8 i;
-
-	for (i = 0; i < 6; i++)
-		priv->ieee80211->current_network.bssid[i] = 0x55;
-
-
-
-	priv->ieee80211->state = IEEE80211_NOLINK;
-	/*
-	 *	Stop Beacon.
-	 *
-	 *	Vista add a Adhoc profile, HW radio off until
-	 *	OID_DOT11_RESET_REQUEST Driver would set MSR=NO_LINK,
-	 *	then HW Radio ON, MgntQueue Stuck. Because Bcn DMA isn't
-	 *	complete, mgnt queue would stuck until Bcn packet send.
-	 *
-	 *	Disable Beacon Queue Own bit, suggested by jong
-	 */
-	ieee80211_stop_send_beacons(priv->ieee80211);
-
-	priv->ieee80211->link_change(dev);
-	notify_wx_assoc_event(priv->ieee80211);
-}
-
-static void MlmeDisassociateRequest(struct net_device *dev, u8 *asSta, u8 asRsn)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	u8 i;
-
-	SendDisassociation(priv->ieee80211, asSta, asRsn);
-
-	if (memcmp(priv->ieee80211->current_network.bssid, asSta, 6) == 0) {
-		/* ShuChen TODO: change media status. */
-
-		for (i = 0; i < 6; i++)
-			priv->ieee80211->current_network.bssid[i] = 0x22;
-
-		ieee80211_disassociate(priv->ieee80211);
-	}
-}
-
-static void MgntDisconnectAP(struct net_device *dev, u8 asRsn)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
-	/*
-	 * Commented out by rcnjko, 2005.01.27:
-	 * I move SecClearAllKeys() to MgntActSet_802_11_DISASSOCIATE().
-	 *
-	 *	2004/09/15, kcwu, the key should be cleared, or the new
-	 *	handshaking will not success
-	 *
-	 *	In WPA WPA2 need to Clear all key ... because new key will set
-	 *	after new handshaking. 2004.10.11, by rcnjko.
-	 */
-	MlmeDisassociateRequest(dev, priv->ieee80211->current_network.bssid,
-				asRsn);
-
-	priv->ieee80211->state = IEEE80211_NOLINK;
-}
-
-static bool MgntDisconnect(struct net_device *dev, u8 asRsn)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	/*
-	 *	Schedule an workitem to wake up for ps mode, 070109, by rcnjko.
-	 */
-
-	if (IS_DOT11D_ENABLE(priv->ieee80211))
-		Dot11d_Reset(priv->ieee80211);
-	/* In adhoc mode, update beacon frame. */
-	if (priv->ieee80211->state == IEEE80211_LINKED)	{
-		if (priv->ieee80211->iw_mode == IW_MODE_ADHOC)
-			MgntDisconnectIBSS(dev);
-
-		if (priv->ieee80211->iw_mode == IW_MODE_INFRA) {
-			/*
-			 *	We clear key here instead of MgntDisconnectAP()
-			 *	because that MgntActSet_802_11_DISASSOCIATE()
-			 *	is an interface called by OS, e.g.
-			 *	OID_802_11_DISASSOCIATE in Windows while as
-			 *	MgntDisconnectAP() is used to handle
-			 *	disassociation related things to AP, e.g. send
-			 *	Disassoc frame to AP.  2005.01.27, by rcnjko.
-			 */
-			MgntDisconnectAP(dev, asRsn);
-		}
-		/* Indicate Disconnect, 2005.02.23, by rcnjko.	*/
-	}
-	return true;
-}
-/*
- *	Description:
- *		Chang RF Power State.
- *		Note that, only MgntActSet_RF_State() is allowed to set
- *		HW_VAR_RF_STATE.
- *
- *	Assumption:
- *		PASSIVE LEVEL.
- */
-static bool SetRFPowerState(struct net_device *dev,
-			    enum rt_rf_power_state eRFPowerState)
-{
-	struct	r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	bool	bResult = false;
-
-	if (eRFPowerState == priv->eRFPowerState)
-		return bResult;
-
-	bResult = SetZebraRFPowerState8185(dev, eRFPowerState);
-
-	return bResult;
-}
-
-bool MgntActSet_RF_State(struct net_device *dev, enum rt_rf_power_state StateToSet,
-			 u32 ChangeSource)
-{
-	struct	r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	bool	bActionAllowed = false;
-	bool	bConnectBySSID = false;
-	enum rt_rf_power_state rtState;
-	u16	RFWaitCounter = 0;
-	unsigned long flag;
-	/*
-	 *	Prevent the race condition of RF state change. By Bruce,
-	 *	2007-11-28. Only one thread can change the RF state at one time,
-	 *	and others should wait to be executed.
-	 */
-	while (true) {
-		spin_lock_irqsave(&priv->rf_ps_lock, flag);
-		if (priv->RFChangeInProgress) {
-			spin_unlock_irqrestore(&priv->rf_ps_lock, flag);
-			/*  Set RF after the previous action is done.	*/
-			while (priv->RFChangeInProgress) {
-				RFWaitCounter++;
-				udelay(1000); /* 1 ms	*/
-
-				/*
-				 *	Wait too long, return FALSE to avoid
-				 *	to be stuck here.
-				 */
-				if (RFWaitCounter > 1000) { /* 1sec */
-					netdev_info(dev, "MgntActSet_RF_State(): Wait too long to set RF\n");
-					/* TODO: Reset RF state? */
-					return false;
-				}
-			}
-		} else {
-			priv->RFChangeInProgress = true;
-			spin_unlock_irqrestore(&priv->rf_ps_lock, flag);
-			break;
-		}
-	}
-	rtState = priv->eRFPowerState;
-
-	switch (StateToSet) {
-	case RF_ON:
-		/*
-		 *	Turn On RF no matter the IPS setting because we need to
-		 *	update the RF state to Ndis under Vista, or the Windows
-		 *	does not allow the driver to perform site survey any
-		 *	more. By Bruce, 2007-10-02.
-		 */
-		priv->RfOffReason &= (~ChangeSource);
-
-		if (!priv->RfOffReason)	{
-			priv->RfOffReason = 0;
-			bActionAllowed = true;
-
-			if (rtState == RF_OFF &&
-			    ChangeSource >= RF_CHANGE_BY_HW)
-				bConnectBySSID = true;
-		}
-		break;
-
-	case RF_OFF:
-		 /* 070125, rcnjko: we always keep connected in AP mode. */
-
-		if (priv->RfOffReason > RF_CHANGE_BY_IPS) {
-			/*
-			 *	060808, Annie:
-			 *	Disconnect to current BSS when radio off.
-			 *	Asked by QuanTa.
-			 *
-			 *	Calling MgntDisconnect() instead of
-			 *	MgntActSet_802_11_DISASSOCIATE(), because
-			 *	we do NOT need to set ssid to dummy ones.
-			 */
-			MgntDisconnect(dev, disas_lv_ss);
-			/*
-			 *	Clear content of bssDesc[] and bssDesc4Query[]
-			 *	to avoid reporting old bss to UI.
-			 */
-		}
-
-		priv->RfOffReason |= ChangeSource;
-		bActionAllowed = true;
-		break;
-	case RF_SLEEP:
-		priv->RfOffReason |= ChangeSource;
-		bActionAllowed = true;
-		break;
-	default:
-		break;
-	}
-
-	if (bActionAllowed) {
-		/* Config HW to the specified mode. */
-		SetRFPowerState(dev, StateToSet);
-	}
-
-	/* Release RF spinlock	*/
-	spin_lock_irqsave(&priv->rf_ps_lock, flag);
-	priv->RFChangeInProgress = false;
-	spin_unlock_irqrestore(&priv->rf_ps_lock, flag);
-	return bActionAllowed;
-}
-
-static void InactivePowerSave(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	/*
-	 *	This flag "bSwRfProcessing", indicates the status of IPS
-	 *	procedure, should be set if the IPS workitem is really
-	 *	scheduled. The old code, sets this flag before scheduling the
-	 *	IPS workitem and however, at the same time the previous IPS
-	 *	workitem did not end yet, fails to schedule the current
-	 *	workitem. Thus, bSwRfProcessing blocks the IPS procedure of
-	 *	switching RF.
-	 */
-	priv->bSwRfProcessing = true;
-
-	MgntActSet_RF_State(dev, priv->eInactivePowerState, RF_CHANGE_BY_IPS);
-
-	/*
-	 *	To solve CAM values miss in RF OFF, rewrite CAM values after
-	 *	RF ON. By Bruce, 2007-09-20.
-	 */
-
-	priv->bSwRfProcessing = false;
-}
-
-/*
- *	Description:
- *		Enter the inactive power save mode. RF will be off
- */
-void IPSEnter(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	enum rt_rf_power_state rtState;
-	if (priv->bInactivePs) {
-		rtState = priv->eRFPowerState;
-
-		/*
-		 *	Do not enter IPS in the following conditions:
-		 *	(1) RF is already OFF or
-		 *	Sleep (2) bSwRfProcessing (indicates the IPS is still
-		 *	under going) (3) Connected (only disconnected can
-		 *	trigger IPS)(4) IBSS (send Beacon)
-		 *	(5) AP mode (send Beacon)
-		 */
-		if (rtState == RF_ON && !priv->bSwRfProcessing
-			&& (priv->ieee80211->state != IEEE80211_LINKED)) {
-			priv->eInactivePowerState = RF_OFF;
-			InactivePowerSave(dev);
-		}
-	}
-}
-void IPSLeave(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	enum rt_rf_power_state rtState;
-	if (priv->bInactivePs) {
-		rtState = priv->eRFPowerState;
-		if ((rtState == RF_OFF || rtState == RF_SLEEP) &&
-		    !priv->bSwRfProcessing
-		    && priv->RfOffReason <= RF_CHANGE_BY_IPS) {
-			priv->eInactivePowerState = RF_ON;
-			InactivePowerSave(dev);
-		}
-	}
-}
-
-void rtl8185b_adapter_start(struct net_device *dev)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	struct ieee80211_device *ieee = priv->ieee80211;
-
-	u8 SupportedWirelessMode;
-	u8 InitWirelessMode;
-	u8 bInvalidWirelessMode = 0;
-	u8 tmpu8;
-	u8 btCR9346;
-	u8 TmpU1b;
-	u8 btPSR;
-
-	write_nic_byte(dev, 0x24e, (BIT5|BIT6|BIT0));
-	rtl8180_reset(dev);
-
-	priv->dma_poll_mask = 0;
-	priv->dma_poll_stop_mask = 0;
-
-	HwConfigureRTL8185(dev);
-	write_nic_dword(dev, MAC0, ((u32 *)dev->dev_addr)[0]);
-	write_nic_word(dev, MAC4, ((u32 *)dev->dev_addr)[1] & 0xffff);
-	/* default network type to 'No Link' */
-	write_nic_byte(dev, MSR, read_nic_byte(dev, MSR) & 0xf3);
-	write_nic_word(dev, BcnItv, 100);
-	write_nic_word(dev, AtimWnd, 2);
-	PlatformIOWrite2Byte(dev, FEMR, 0xFFFF);
-	write_nic_byte(dev, WPA_CONFIG, 0);
-	MacConfig_85BASIC(dev);
-	/* Override the RFSW_CTRL (MAC offset 0x272-0x273), 2006.06.07,
-	 * by rcnjko.
-	 */
-	/* BT_DEMO_BOARD type */
-	PlatformIOWrite2Byte(dev, RFSW_CTRL, 0x569a);
-
-	/*
-	 *---------------------------------------------------------------------
-	 *	Set up PHY related.
-	 *---------------------------------------------------------------------
-	 */
-	/* Enable Config3.PARAM_En to revise AnaaParm. */
-	write_nic_byte(dev, CR9346, 0xc0); /* enable config register write */
-	tmpu8 = read_nic_byte(dev, CONFIG3);
-	write_nic_byte(dev, CONFIG3, (tmpu8 | CONFIG3_PARM_En));
-	/* Turn on Analog power. */
-	/* Asked for by William, otherwise, MAC 3-wire can't work,
-	 * 2006.06.27, by rcnjko.
-	 */
-	write_nic_dword(dev, ANAPARAM2, ANAPARM2_ASIC_ON);
-	write_nic_dword(dev, ANAPARAM, ANAPARM_ASIC_ON);
-	write_nic_word(dev, ANAPARAM3, 0x0010);
-
-	write_nic_byte(dev, CONFIG3, tmpu8);
-	write_nic_byte(dev, CR9346, 0x00);
-	/* enable EEM0 and EEM1 in 9346CR */
-	btCR9346 = read_nic_byte(dev, CR9346);
-	write_nic_byte(dev, CR9346, (btCR9346 | 0xC0));
-
-	/* B cut use LED1 to control HW RF on/off */
-	TmpU1b = read_nic_byte(dev, CONFIG5);
-	TmpU1b = TmpU1b & ~BIT3;
-	write_nic_byte(dev, CONFIG5, TmpU1b);
-
-	/* disable EEM0 and EEM1 in 9346CR */
-	btCR9346 &= ~(0xC0);
-	write_nic_byte(dev, CR9346, btCR9346);
-
-	/* Enable Led (suggested by Jong) */
-	/* B-cut RF Radio on/off  5e[3]=0 */
-	btPSR = read_nic_byte(dev, PSR);
-	write_nic_byte(dev, PSR, (btPSR | BIT3));
-	/* setup initial timing for RFE. */
-	write_nic_word(dev, RFPinsOutput, 0x0480);
-	SetOutputEnableOfRfPins(dev);
-	write_nic_word(dev, RFPinsSelect, 0x2488);
-
-	/* PHY config. */
-	PhyConfig8185(dev);
-
-	/*
-	 *	We assume RegWirelessMode has already been initialized before,
-	 *	however, we has to validate the wireless mode here and provide a
-	 *	reasonable initialized value if necessary. 2005.01.13,
-	 *	by rcnjko.
-	 */
-	SupportedWirelessMode = GetSupportedWirelessMode8185(dev);
-	if ((ieee->mode != WIRELESS_MODE_B) &&
-		(ieee->mode != WIRELESS_MODE_G) &&
-		(ieee->mode != WIRELESS_MODE_A) &&
-		(ieee->mode != WIRELESS_MODE_AUTO)) {
-		/* It should be one of B, G, A, or AUTO. */
-		bInvalidWirelessMode = 1;
-	} else {
-	/* One of B, G, A, or AUTO. */
-		/* Check if the wireless mode is supported by RF. */
-		if	((ieee->mode != WIRELESS_MODE_AUTO) &&
-			(ieee->mode & SupportedWirelessMode) == 0) {
-			bInvalidWirelessMode = 1;
-		}
-	}
-
-	if (bInvalidWirelessMode || ieee->mode == WIRELESS_MODE_AUTO) {
-		/* Auto or other invalid value. */
-		/* Assigne a wireless mode to initialize. */
-		if ((SupportedWirelessMode & WIRELESS_MODE_A)) {
-			InitWirelessMode = WIRELESS_MODE_A;
-		} else if ((SupportedWirelessMode & WIRELESS_MODE_G)) {
-			InitWirelessMode = WIRELESS_MODE_G;
-		} else if ((SupportedWirelessMode & WIRELESS_MODE_B)) {
-			InitWirelessMode = WIRELESS_MODE_B;
-		} else {
-			DMESGW("InitializeAdapter8185(): No valid wireless mode supported, SupportedWirelessMode(%x)!!!\n",
-				 SupportedWirelessMode);
-			InitWirelessMode = WIRELESS_MODE_B;
-		}
-
-		/* Initialize RegWirelessMode if it is not a valid one.	*/
-		if (bInvalidWirelessMode)
-			ieee->mode = (enum wireless_mode)InitWirelessMode;
-
-	} else {
-	/* One of B, G, A. */
-		InitWirelessMode = ieee->mode;
-	}
-	priv->eRFPowerState = RF_OFF;
-	priv->RfOffReason = 0;
-	{
-		MgntActSet_RF_State(dev, RF_ON, 0);
-	}
-		/*
-		 * If inactive power mode is enabled, disable rf while in
-		 * disconnected state.
-		 */
-	if (priv->bInactivePs)
-		MgntActSet_RF_State(dev , RF_OFF, RF_CHANGE_BY_IPS);
-
-	ActSetWirelessMode8185(dev, (u8)(InitWirelessMode));
-
-	/* ----------------------------------------------------------------- */
-
-	rtl8185b_irq_enable(dev);
-
-	netif_start_queue(dev);
-}
-
-void rtl8185b_rx_enable(struct net_device *dev)
-{
-	u8 cmd;
-	/* for now we accept data, management & ctl frame*/
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
-
-	if (dev->flags & IFF_PROMISC)
-		DMESG("NIC in promisc mode");
-
-	if (priv->ieee80211->iw_mode == IW_MODE_MONITOR || dev->flags &
-	    IFF_PROMISC) {
-		priv->ReceiveConfig = priv->ReceiveConfig & (~RCR_APM);
-		priv->ReceiveConfig = priv->ReceiveConfig | RCR_AAP;
-	}
-
-	if (priv->ieee80211->iw_mode == IW_MODE_MONITOR)
-		priv->ReceiveConfig = priv->ReceiveConfig | RCR_ACF |
-				      RCR_APWRMGT | RCR_AICV;
-
-
-	if (priv->crcmon == 1 && priv->ieee80211->iw_mode == IW_MODE_MONITOR)
-		priv->ReceiveConfig = priv->ReceiveConfig | RCR_ACRC32;
-
-	write_nic_dword(dev, RCR, priv->ReceiveConfig);
-
-	fix_rx_fifo(dev);
-
-	cmd = read_nic_byte(dev, CMD);
-	write_nic_byte(dev, CMD, cmd | (1<<CMD_RX_ENABLE_SHIFT));
-
-}
-
-void rtl8185b_tx_enable(struct net_device *dev)
-{
-	u8 cmd;
-	u8 byte;
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
-	write_nic_dword(dev, TCR, priv->TransmitConfig);
-	byte = read_nic_byte(dev, MSR);
-	byte |= MSR_LINK_ENEDCA;
-	write_nic_byte(dev, MSR, byte);
-
-	fix_tx_fifo(dev);
-
-	cmd = read_nic_byte(dev, CMD);
-	write_nic_byte(dev, CMD, cmd | (1<<CMD_TX_ENABLE_SHIFT));
-}
-