Merge tag 'usb-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/PHY updates from Greg KH:
 "Here is the big USB and PHY driver updates for 4.11-rc1.

  Nothing major, just the normal amount of churn in the usb gadget and
  dwc and xhci controllers, new device ids, new phy drivers, a new
  usb-serial driver, and a few other minor changes in different USB
  drivers.

  All have been in linux-next for a long time with no reported issues"

* tag 'usb-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (265 commits)
  usb: cdc-wdm: remove logically dead code
  USB: serial: keyspan: drop header file
  USB: serial: io_edgeport: drop io-tables header file
  usb: musb: add code comment for clarification
  usb: misc: add USB251xB/xBi Hi-Speed Hub Controller Driver
  usb: misc: usbtest: remove redundant check on retval < 0
  USB: serial: upd78f0730: sort device ids
  USB: serial: upd78f0730: add ID for EVAL-ADXL362Z
  ohci-hub: fix typo in dbg_port macro
  usb: musb: dsps: Manage CPPI 4.1 DMA interrupt in DSPS
  usb: musb: tusb6010: Clean up tusb_omap_dma structure
  usb: musb: cppi_dma: Clean up cppi41_dma_controller structure
  usb: musb: cppi_dma: Clean up cppi structure
  usb: musb: cppi41: Detect aborted transfers in cppi41_dma_callback()
  usb: musb: dma: Add a DMA completion platform callback
  drivers: usb: usbip: Add missing break statement to switch
  usb: mtu3: remove redundant dev_err call in get_ssusb_rscs()
  USB: serial: mos7840: fix another NULL-deref at open
  USB: serial: console: clean up sanity checks
  USB: serial: console: fix uninitialised spinlock
  ...

30 files changed, 1577 insertions, 1254 deletions

diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index d9bc8dafe000..a8d5f2e4878d 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -713,6 +713,15 @@ config USB_SERIAL_QT2
 	  To compile this driver as a module, choose M here: the
 	  module will be called quatech-serial.
 
+config USB_SERIAL_UPD78F0730
+	tristate "USB Renesas uPD78F0730 Single Port Serial Driver"
+	help
+	  Say Y here if you want to use the Renesas uPD78F0730
+	  serial driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called upd78f0730.
+
 config USB_SERIAL_DEBUG
 	tristate "USB Debugging Device"
 	help
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index 9e43b7b002eb..5a21a82390e1 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -56,6 +56,7 @@ obj-$(CONFIG_USB_SERIAL_SSU100)			+= ssu100.o
 obj-$(CONFIG_USB_SERIAL_SYMBOL)			+= symbolserial.o
 obj-$(CONFIG_USB_SERIAL_WWAN)			+= usb_wwan.o
 obj-$(CONFIG_USB_SERIAL_TI)			+= ti_usb_3410_5052.o
+obj-$(CONFIG_USB_SERIAL_UPD78F0730)		+= upd78f0730.o
 obj-$(CONFIG_USB_SERIAL_VISOR)			+= visor.o
 obj-$(CONFIG_USB_SERIAL_WISHBONE)		+= wishbone-serial.o
 obj-$(CONFIG_USB_SERIAL_WHITEHEAT)		+= whiteheat.o
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 1532cde8a437..2779e59c30f1 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -99,10 +99,17 @@ static int ark3116_read_reg(struct usb_serial *serial,
 				 usb_rcvctrlpipe(serial->dev, 0),
 				 0xfe, 0xc0, 0, reg,
 				 buf, 1, ARK_TIMEOUT);
-	if (result < 0)
+	if (result < 1) {
+		dev_err(&serial->interface->dev,
+				"failed to read register %u: %d\n",
+				reg, result);
+		if (result >= 0)
+			result = -EIO;
+
 		return result;
-	else
-		return buf[0];
+	}
+
+	return buf[0];
 }
 
 static inline int calc_divisor(int bps)
@@ -118,17 +125,11 @@ static inline int calc_divisor(int bps)
 static int ark3116_attach(struct usb_serial *serial)
 {
 	/* make sure we have our end-points */
-	if ((serial->num_bulk_in == 0) ||
-	    (serial->num_bulk_out == 0) ||
-	    (serial->num_interrupt_in == 0)) {
-		dev_err(&serial->dev->dev,
-			"%s - missing endpoint - "
-			"bulk in: %d, bulk out: %d, int in %d\n",
-			KBUILD_MODNAME,
-			serial->num_bulk_in,
-			serial->num_bulk_out,
-			serial->num_interrupt_in);
-		return -EINVAL;
+	if (serial->num_bulk_in == 0 ||
+			serial->num_bulk_out == 0 ||
+			serial->num_interrupt_in == 0) {
+		dev_err(&serial->interface->dev, "missing endpoint\n");
+		return -ENODEV;
 	}
 
 	return 0;
@@ -186,10 +187,8 @@ static int ark3116_port_probe(struct usb_serial_port *port)
 	if (priv->irda)
 		ark3116_write_reg(serial, 0x9, 0);
 
-	dev_info(&serial->dev->dev,
-		"%s using %s mode\n",
-		KBUILD_MODNAME,
-		priv->irda ? "IrDA" : "RS232");
+	dev_info(&port->dev, "using %s mode\n", priv->irda ? "IrDA" : "RS232");
+
 	return 0;
 }
 
@@ -325,9 +324,8 @@ static void ark3116_set_termios(struct tty_struct *tty,
 
 	/* check for software flow control */
 	if (I_IXOFF(tty) || I_IXON(tty)) {
-		dev_warn(&serial->dev->dev,
-			 "%s: don't know how to do software flow control\n",
-			 KBUILD_MODNAME);
+		dev_warn(&port->dev,
+				"software flow control not implemented\n");
 	}
 
 	/* Don't rewrite B0 */
@@ -346,8 +344,8 @@ static void ark3116_close(struct usb_serial_port *port)
 	ark3116_write_reg(serial, UART_IER, 0);
 
 	usb_serial_generic_close(port);
-	if (serial->num_interrupt_in)
-		usb_kill_urb(port->interrupt_in_urb);
+
+	usb_kill_urb(port->interrupt_in_urb);
 }
 
 static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port)
@@ -366,23 +364,29 @@ static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port)
 		dev_dbg(&port->dev,
 			"%s - usb_serial_generic_open failed: %d\n",
 			__func__, result);
-		goto err_out;
+		goto err_free;
 	}
 
 	/* remove any data still left: also clears error state */
 	ark3116_read_reg(serial, UART_RX, buf);
 
 	/* read modem status */
-	priv->msr = ark3116_read_reg(serial, UART_MSR, buf);
+	result = ark3116_read_reg(serial, UART_MSR, buf);
+	if (result < 0)
+		goto err_close;
+	priv->msr = *buf;
+
 	/* read line status */
-	priv->lsr = ark3116_read_reg(serial, UART_LSR, buf);
+	result = ark3116_read_reg(serial, UART_LSR, buf);
+	if (result < 0)
+		goto err_close;
+	priv->lsr = *buf;
 
 	result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 	if (result) {
 		dev_err(&port->dev, "submit irq_in urb failed %d\n",
 			result);
-		ark3116_close(port);
-		goto err_out;
+		goto err_close;
 	}
 
 	/* activate interrupts */
@@ -395,8 +399,15 @@ static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port)
 	if (tty)
 		ark3116_set_termios(tty, port, NULL);
 
-err_out:
 	kfree(buf);
+
+	return 0;
+
+err_close:
+	usb_serial_generic_close(port);
+err_free:
+	kfree(buf);
+
 	return result;
 }
 
@@ -602,9 +613,8 @@ static void ark3116_read_int_callback(struct urb *urb)
 
 	result = usb_submit_urb(urb, GFP_ATOMIC);
 	if (result)
-		dev_err(&urb->dev->dev,
-			"%s - Error %d submitting interrupt urb\n",
-			__func__, result);
+		dev_err(&port->dev, "failed to resubmit interrupt urb: %d\n",
+			result);
 }
 
 
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index 95aa5233726c..351745aec0e1 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -93,8 +93,8 @@ MODULE_DEVICE_TABLE(usb, id_table);
 struct ch341_private {
 	spinlock_t lock; /* access lock */
 	unsigned baud_rate; /* set baud rate */
-	u8 line_control; /* set line control value RTS/DTR */
-	u8 line_status; /* active status of modem control inputs */
+	u8 mcr;
+	u8 msr;
 	u8 lcr;
 };
 
@@ -107,8 +107,8 @@ static int ch341_control_out(struct usb_device *dev, u8 request,
 {
 	int r;
 
-	dev_dbg(&dev->dev, "ch341_control_out(%02x,%02x,%04x,%04x)\n",
-		USB_DIR_OUT|0x40, (int)request, (int)value, (int)index);
+	dev_dbg(&dev->dev, "%s - (%02x,%04x,%04x)\n", __func__,
+		request, value, index);
 
 	r = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request,
 			    USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
@@ -125,9 +125,8 @@ static int ch341_control_in(struct usb_device *dev,
 {
 	int r;
 
-	dev_dbg(&dev->dev, "ch341_control_in(%02x,%02x,%04x,%04x,%p,%u)\n",
-		USB_DIR_IN|0x40, (int)request, (int)value, (int)index, buf,
-		(int)bufsize);
+	dev_dbg(&dev->dev, "%s - (%02x,%04x,%04x,%u)\n", __func__,
+		request, value, index, bufsize);
 
 	r = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), request,
 			    USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
@@ -210,7 +209,7 @@ static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv)
 		goto out;
 
 	spin_lock_irqsave(&priv->lock, flags);
-	priv->line_status = (~(*buffer)) & CH341_BITS_MODEM_STAT;
+	priv->msr = (~(*buffer)) & CH341_BITS_MODEM_STAT;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 out:	kfree(buffer);
@@ -239,30 +238,11 @@ static int ch341_configure(struct usb_device *dev, struct ch341_private *priv)
 	if (r < 0)
 		goto out;
 
-	/* expect two bytes 0x56 0x00 */
-	r = ch341_control_in(dev, CH341_REQ_READ_REG, 0x2518, 0, buffer, size);
-	if (r < 0)
-		goto out;
-
-	r = ch341_control_out(dev, CH341_REQ_WRITE_REG, 0x2518, 0x0050);
-	if (r < 0)
-		goto out;
-
-	/* expect 0xff 0xee */
-	r = ch341_get_status(dev, priv);
-	if (r < 0)
-		goto out;
-
 	r = ch341_set_baudrate_lcr(dev, priv, priv->lcr);
 	if (r < 0)
 		goto out;
 
-	r = ch341_set_handshake(dev, priv->line_control);
-	if (r < 0)
-		goto out;
-
-	/* expect 0x9f 0xee */
-	r = ch341_get_status(dev, priv);
+	r = ch341_set_handshake(dev, priv->mcr);
 
 out:	kfree(buffer);
 	return r;
@@ -279,6 +259,11 @@ static int ch341_port_probe(struct usb_serial_port *port)
 
 	spin_lock_init(&priv->lock);
 	priv->baud_rate = DEFAULT_BAUD_RATE;
+	/*
+	 * Some CH340 devices appear unable to change the initial LCR
+	 * settings, so set a sane 8N1 default.
+	 */
+	priv->lcr = CH341_LCR_ENABLE_RX | CH341_LCR_ENABLE_TX | CH341_LCR_CS8;
 
 	r = ch341_configure(port->serial->dev, priv);
 	if (r < 0)
@@ -304,7 +289,7 @@ static int ch341_port_remove(struct usb_serial_port *port)
 static int ch341_carrier_raised(struct usb_serial_port *port)
 {
 	struct ch341_private *priv = usb_get_serial_port_data(port);
-	if (priv->line_status & CH341_BIT_DCD)
+	if (priv->msr & CH341_BIT_DCD)
 		return 1;
 	return 0;
 }
@@ -317,11 +302,11 @@ static void ch341_dtr_rts(struct usb_serial_port *port, int on)
 	/* drop DTR and RTS */
 	spin_lock_irqsave(&priv->lock, flags);
 	if (on)
-		priv->line_control |= CH341_BIT_RTS | CH341_BIT_DTR;
+		priv->mcr |= CH341_BIT_RTS | CH341_BIT_DTR;
 	else
-		priv->line_control &= ~(CH341_BIT_RTS | CH341_BIT_DTR);
+		priv->mcr &= ~(CH341_BIT_RTS | CH341_BIT_DTR);
 	spin_unlock_irqrestore(&priv->lock, flags);
-	ch341_set_handshake(port->serial->dev, priv->line_control);
+	ch341_set_handshake(port->serial->dev, priv->mcr);
 }
 
 static void ch341_close(struct usb_serial_port *port)
@@ -334,14 +319,9 @@ static void ch341_close(struct usb_serial_port *port)
 /* open this device, set default parameters */
 static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
-	struct usb_serial *serial = port->serial;
 	struct ch341_private *priv = usb_get_serial_port_data(port);
 	int r;
 
-	r = ch341_configure(serial->dev, priv);
-	if (r)
-		return r;
-
 	if (tty)
 		ch341_set_termios(tty, port, NULL);
 
@@ -353,6 +333,12 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port)
 		return r;
 	}
 
+	r = ch341_get_status(port->serial->dev, priv);
+	if (r < 0) {
+		dev_err(&port->dev, "failed to read modem status: %d\n", r);
+		goto err_kill_interrupt_urb;
+	}
+
 	r = usb_serial_generic_open(tty, port);
 	if (r)
 		goto err_kill_interrupt_urb;
@@ -374,7 +360,7 @@ static void ch341_set_termios(struct tty_struct *tty,
 	struct ch341_private *priv = usb_get_serial_port_data(port);
 	unsigned baud_rate;
 	unsigned long flags;
-	unsigned char ctrl;
+	u8 lcr;
 	int r;
 
 	/* redundant changes may cause the chip to lose bytes */
@@ -383,54 +369,54 @@ static void ch341_set_termios(struct tty_struct *tty,
 
 	baud_rate = tty_get_baud_rate(tty);
 
-	ctrl = CH341_LCR_ENABLE_RX | CH341_LCR_ENABLE_TX;
+	lcr = CH341_LCR_ENABLE_RX | CH341_LCR_ENABLE_TX;
 
 	switch (C_CSIZE(tty)) {
 	case CS5:
-		ctrl |= CH341_LCR_CS5;
+		lcr |= CH341_LCR_CS5;
 		break;
 	case CS6:
-		ctrl |= CH341_LCR_CS6;
+		lcr |= CH341_LCR_CS6;
 		break;
 	case CS7:
-		ctrl |= CH341_LCR_CS7;
+		lcr |= CH341_LCR_CS7;
 		break;
 	case CS8:
-		ctrl |= CH341_LCR_CS8;
+		lcr |= CH341_LCR_CS8;
 		break;
 	}
 
 	if (C_PARENB(tty)) {
-		ctrl |= CH341_LCR_ENABLE_PAR;
+		lcr |= CH341_LCR_ENABLE_PAR;
 		if (C_PARODD(tty) == 0)
-			ctrl |= CH341_LCR_PAR_EVEN;
+			lcr |= CH341_LCR_PAR_EVEN;
 		if (C_CMSPAR(tty))
-			ctrl |= CH341_LCR_MARK_SPACE;
+			lcr |= CH341_LCR_MARK_SPACE;
 	}
 
 	if (C_CSTOPB(tty))
-		ctrl |= CH341_LCR_STOP_BITS_2;
+		lcr |= CH341_LCR_STOP_BITS_2;
 
 	if (baud_rate) {
 		priv->baud_rate = baud_rate;
 
-		r = ch341_set_baudrate_lcr(port->serial->dev, priv, ctrl);
+		r = ch341_set_baudrate_lcr(port->serial->dev, priv, lcr);
 		if (r < 0 && old_termios) {
 			priv->baud_rate = tty_termios_baud_rate(old_termios);
 			tty_termios_copy_hw(&tty->termios, old_termios);
 		} else if (r == 0) {
-			priv->lcr = ctrl;
+			priv->lcr = lcr;
 		}
 	}
 
 	spin_lock_irqsave(&priv->lock, flags);
 	if (C_BAUD(tty) == B0)
-		priv->line_control &= ~(CH341_BIT_DTR | CH341_BIT_RTS);
+		priv->mcr &= ~(CH341_BIT_DTR | CH341_BIT_RTS);
 	else if (old_termios && (old_termios->c_cflag & CBAUD) == B0)
-		priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS);
+		priv->mcr |= (CH341_BIT_DTR | CH341_BIT_RTS);
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	ch341_set_handshake(port->serial->dev, priv->line_control);
+	ch341_set_handshake(port->serial->dev, priv->mcr);
 }
 
 static void ch341_break_ctl(struct tty_struct *tty, int break_state)
@@ -486,20 +472,20 @@ static int ch341_tiocmset(struct tty_struct *tty,
 
 	spin_lock_irqsave(&priv->lock, flags);
 	if (set & TIOCM_RTS)
-		priv->line_control |= CH341_BIT_RTS;
+		priv->mcr |= CH341_BIT_RTS;
 	if (set & TIOCM_DTR)
-		priv->line_control |= CH341_BIT_DTR;
+		priv->mcr |= CH341_BIT_DTR;
 	if (clear & TIOCM_RTS)
-		priv->line_control &= ~CH341_BIT_RTS;
+		priv->mcr &= ~CH341_BIT_RTS;
 	if (clear & TIOCM_DTR)
-		priv->line_control &= ~CH341_BIT_DTR;
-	control = priv->line_control;
+		priv->mcr &= ~CH341_BIT_DTR;
+	control = priv->mcr;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	return ch341_set_handshake(port->serial->dev, control);
 }
 
-static void ch341_update_line_status(struct usb_serial_port *port,
+static void ch341_update_status(struct usb_serial_port *port,
 					unsigned char *data, size_t len)
 {
 	struct ch341_private *priv = usb_get_serial_port_data(port);
@@ -514,8 +500,8 @@ static void ch341_update_line_status(struct usb_serial_port *port,
 	status = ~data[2] & CH341_BITS_MODEM_STAT;
 
 	spin_lock_irqsave(&priv->lock, flags);
-	delta = status ^ priv->line_status;
-	priv->line_status = status;
+	delta = status ^ priv->msr;
+	priv->msr = status;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	if (data[1] & CH341_MULT_STAT)
@@ -568,7 +554,7 @@ static void ch341_read_int_callback(struct urb *urb)
 	}
 
 	usb_serial_debug_data(&port->dev, __func__, len, data);
-	ch341_update_line_status(port, data, len);
+	ch341_update_status(port, data, len);
 exit:
 	status = usb_submit_urb(urb, GFP_ATOMIC);
 	if (status) {
@@ -587,8 +573,8 @@ static int ch341_tiocmget(struct tty_struct *tty)
 	unsigned int result;
 
 	spin_lock_irqsave(&priv->lock, flags);
-	mcr = priv->line_control;
-	status = priv->line_status;
+	mcr = priv->mcr;
+	status = priv->msr;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	result = ((mcr & CH341_BIT_DTR)		? TIOCM_DTR : 0)
@@ -619,6 +605,12 @@ static int ch341_reset_resume(struct usb_serial *serial)
 				ret);
 			return ret;
 		}
+
+		ret = ch341_get_status(port->serial->dev, priv);
+		if (ret < 0) {
+			dev_err(&port->dev, "failed to read modem status: %d\n",
+				ret);
+		}
 	}
 
 	return usb_serial_generic_resume(serial);
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 8967715fe6fc..fdf89800ebc3 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -143,6 +143,7 @@ static int usb_console_setup(struct console *co, char *options)
 			tty->driver = usb_serial_tty_driver;
 			tty->index = co->index;
 			init_ldsem(&tty->ldisc_sem);
+			spin_lock_init(&tty->files_lock);
 			INIT_LIST_HEAD(&tty->tty_files);
 			kref_get(&tty->driver->kref);
 			__module_get(tty->driver->owner);
@@ -264,8 +265,7 @@ static struct console usbcons = {
 
 void usb_serial_console_disconnect(struct usb_serial *serial)
 {
-	if (serial && serial->port && serial->port[0]
-				&& serial->port[0] == usbcons_info.port) {
+	if (serial->port[0] == usbcons_info.port) {
 		usb_serial_console_exit();
 		usb_serial_put(serial);
 	}
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 5d61d0871f2e..0c55e7f64269 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -178,6 +178,8 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x1901, 0x0190) }, /* GE B850 CP2105 Recorder interface */
 	{ USB_DEVICE(0x1901, 0x0193) }, /* GE B650 CP2104 PMC interface */
 	{ USB_DEVICE(0x1901, 0x0194) },	/* GE Healthcare Remote Alarm Box */
+	{ USB_DEVICE(0x1901, 0x0195) },	/* GE B850/B650/B450 CP2104 DP UART interface */
+	{ USB_DEVICE(0x1901, 0x0196) },	/* GE B850 CP2105 DP UART interface */
 	{ USB_DEVICE(0x19CF, 0x3000) }, /* Parrot NMEA GPS Flight Recorder */
 	{ USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
 	{ USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index bbeeb2bd55a8..90110de715e0 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -1069,7 +1069,6 @@ static void cypress_read_int_callback(struct urb *urb)
 	unsigned char *data = urb->transfer_buffer;
 	unsigned long flags;
 	char tty_flag = TTY_NORMAL;
-	int havedata = 0;
 	int bytes = 0;
 	int result;
 	int i = 0;
@@ -1118,16 +1117,12 @@ static void cypress_read_int_callback(struct urb *urb)
 		priv->current_status = data[0] & 0xF8;
 		bytes = data[1] + 2;
 		i = 2;
-		if (bytes > 2)
-			havedata = 1;
 		break;
 	case packet_format_2:
 		/* This is for the CY7C63743... */
 		priv->current_status = data[0] & 0xF8;
 		bytes = (data[0] & 0x07) + 1;
 		i = 1;
-		if (bytes > 1)
-			havedata = 1;
 		break;
 	}
 	spin_unlock_irqrestore(&priv->lock, flags);
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 6a1df9e824ca..eb433922598c 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -1398,25 +1398,30 @@ static int digi_read_inb_callback(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
 	struct digi_port *priv = usb_get_serial_port_data(port);
-	int opcode = ((unsigned char *)urb->transfer_buffer)[0];
-	int len = ((unsigned char *)urb->transfer_buffer)[1];
-	int port_status = ((unsigned char *)urb->transfer_buffer)[2];
-	unsigned char *data = ((unsigned char *)urb->transfer_buffer) + 3;
+	unsigned char *buf = urb->transfer_buffer;
+	int opcode;
+	int len;
+	int port_status;
+	unsigned char *data;
 	int flag, throttled;
-	int status = urb->status;
-
-	/* do not process callbacks on closed ports */
-	/* but do continue the read chain */
-	if (urb->status == -ENOENT)
-		return 0;
 
 	/* short/multiple packet check */
+	if (urb->actual_length < 2) {
+		dev_warn(&port->dev, "short packet received\n");
+		return -1;
+	}
+
+	opcode = buf[0];
+	len = buf[1];
+
 	if (urb->actual_length != len + 2) {
-		dev_err(&port->dev, "%s: INCOMPLETE OR MULTIPLE PACKET, "
-			"status=%d, port=%d, opcode=%d, len=%d, "
-			"actual_length=%d, status=%d\n", __func__, status,
-			priv->dp_port_num, opcode, len, urb->actual_length,
-			port_status);
+		dev_err(&port->dev, "malformed packet received: port=%d, opcode=%d, len=%d, actual_length=%u\n",
+			priv->dp_port_num, opcode, len, urb->actual_length);
+		return -1;
+	}
+
+	if (opcode == DIGI_CMD_RECEIVE_DATA && len < 1) {
+		dev_err(&port->dev, "malformed data packet received\n");
 		return -1;
 	}
 
@@ -1430,6 +1435,9 @@ static int digi_read_inb_callback(struct urb *urb)
 
 	/* receive data */
 	if (opcode == DIGI_CMD_RECEIVE_DATA) {
+		port_status = buf[2];
+		data = &buf[3];
+
 		/* get flag from port_status */
 		flag = 0;
 
@@ -1482,16 +1490,20 @@ static int digi_read_oob_callback(struct urb *urb)
 	struct usb_serial *serial = port->serial;
 	struct tty_struct *tty;
 	struct digi_port *priv = usb_get_serial_port_data(port);
+	unsigned char *buf = urb->transfer_buffer;
 	int opcode, line, status, val;
 	int i;
 	unsigned int rts;
 
+	if (urb->actual_length < 4)
+		return -1;
+
 	/* handle each oob command */
-	for (i = 0; i < urb->actual_length - 3;) {
-		opcode = ((unsigned char *)urb->transfer_buffer)[i++];
-		line = ((unsigned char *)urb->transfer_buffer)[i++];
-		status = ((unsigned char *)urb->transfer_buffer)[i++];
-		val = ((unsigned char *)urb->transfer_buffer)[i++];
+	for (i = 0; i < urb->actual_length - 4; i += 4) {
+		opcode = buf[i];
+		line = buf[i + 1];
+		status = buf[i + 2];
+		val = buf[i + 3];
 
 		dev_dbg(&port->dev, "digi_read_oob_callback: opcode=%d, line=%d, status=%d, val=%d\n",
 			opcode, line, status, val);
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 23d14b98ae2a..c540de15aad2 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1439,10 +1439,13 @@ static int read_latency_timer(struct usb_serial_port *port)
 			     FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE,
 			     0, priv->interface,
 			     buf, 1, WDR_TIMEOUT);
-	if (rv < 0)
+	if (rv < 1) {
 		dev_err(&port->dev, "Unable to read latency timer: %i\n", rv);
-	else
+		if (rv >= 0)
+			rv = -EIO;
+	} else {
 		priv->latency = buf[0];
+	}
 
 	kfree(buf);
 
@@ -1531,7 +1534,7 @@ check_and_exit:
 }
 
 static int get_lsr_info(struct usb_serial_port *port,
-			struct serial_struct __user *retinfo)
+			unsigned int __user *retinfo)
 {
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	unsigned int result = 0;
@@ -1802,8 +1805,6 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
 
 	mutex_init(&priv->cfg_lock);
 
-	priv->flags = ASYNC_LOW_LATENCY;
-
 	if (quirk && quirk->port_probe)
 		quirk->port_probe(priv);
 
@@ -2067,6 +2068,20 @@ static int ftdi_process_packet(struct usb_serial_port *port,
 		priv->prev_status = status;
 	}
 
+	/* save if the transmitter is empty or not */
+	if (packet[1] & FTDI_RS_TEMT)
+		priv->transmit_empty = 1;
+	else
+		priv->transmit_empty = 0;
+
+	len -= 2;
+	if (!len)
+		return 0;	/* status only */
+
+	/*
+	 * Break and error status must only be processed for packets with
+	 * data payload to avoid over-reporting.
+	 */
 	flag = TTY_NORMAL;
 	if (packet[1] & FTDI_RS_ERR_MASK) {
 		/* Break takes precedence over parity, which takes precedence
@@ -2089,15 +2104,6 @@ static int ftdi_process_packet(struct usb_serial_port *port,
 		}
 	}
 
-	/* save if the transmitter is empty or not */
-	if (packet[1] & FTDI_RS_TEMT)
-		priv->transmit_empty = 1;
-	else
-		priv->transmit_empty = 0;
-
-	len -= 2;
-	if (!len)
-		return 0;	/* status only */
 	port->icount.rx += len;
 	ch = packet + 2;
 
@@ -2428,8 +2434,12 @@ static int ftdi_get_modem_status(struct usb_serial_port *port,
 			FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
 			0, priv->interface,
 			buf, len, WDR_TIMEOUT);
-	if (ret < 0) {
+
+	/* NOTE: We allow short responses and handle that below. */
+	if (ret < 1) {
 		dev_err(&port->dev, "failed to get modem status: %d\n", ret);
+		if (ret >= 0)
+			ret = -EIO;
 		ret = usb_translate_errors(ret);
 		goto out;
 	}
@@ -2480,20 +2490,15 @@ static int ftdi_ioctl(struct tty_struct *tty,
 					unsigned int cmd, unsigned long arg)
 {
 	struct usb_serial_port *port = tty->driver_data;
+	void __user *argp = (void __user *)arg;
 
-	/* Based on code from acm.c and others */
 	switch (cmd) {
-
-	case TIOCGSERIAL: /* gets serial port data */
-		return get_serial_info(port,
-					(struct serial_struct __user *) arg);
-
-	case TIOCSSERIAL: /* sets serial port data */
-		return set_serial_info(tty, port,
-					(struct serial_struct __user *) arg);
+	case TIOCGSERIAL:
+		return get_serial_info(port, argp);
+	case TIOCSSERIAL:
+		return set_serial_info(tty, port, argp);
 	case TIOCSERGETLSR:
-		return get_lsr_info(port, (struct serial_struct __user *)arg);
-		break;
+		return get_lsr_info(port, argp);
 	default:
 		break;
 	}
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index d50e5773483f..bb7673e80a57 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -57,6 +57,88 @@
 
 #define OPEN_TIMEOUT		(5*HZ)		/* 5 seconds */
 
+static const struct usb_device_id edgeport_2port_id_table[] = {
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_2) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_2I) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_421) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_21) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_2_DIN) },
+	{ }
+};
+
+static const struct usb_device_id edgeport_4port_id_table[] = {
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_RAPIDPORT_4) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4T) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_MT4X56USB) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4I) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8_DUAL_CPU) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4_DIN) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_22I) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_412_4) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_COMPATIBLE) },
+	{ }
+};
+
+static const struct usb_device_id edgeport_8port_id_table[] = {
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_16_DUAL_CPU) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8I) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8R) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8RR) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_412_8) },
+	{ }
+};
+
+static const struct usb_device_id Epic_port_id_table[] = {
+	{ USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0202) },
+	{ USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0203) },
+	{ USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0310) },
+	{ USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0311) },
+	{ USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0312) },
+	{ USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A758) },
+	{ USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A794) },
+	{ USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A225) },
+	{ }
+};
+
+/* Devices that this driver supports */
+static const struct usb_device_id id_table_combined[] = {
+	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_4) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_RAPIDPORT_4) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_4T) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_MT4X56USB) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_2) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_4I) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_2I) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_421) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_21) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_8_DUAL_CPU) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_8) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_2_DIN) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_4_DIN) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_16_DUAL_CPU) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_22I) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_412_4) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_COMPATIBLE) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_8I) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8R) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8RR) },
+	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_412_8) },
+	{ USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0202) },
+	{ USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0203) },
+	{ USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0310) },
+	{ USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0311) },
+	{ USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0312) },
+	{ USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A758) },
+	{ USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A794) },
+	{ USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A225) },
+	{ } /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, id_table_combined);
+
+
 /* receive port state */
 enum RXSTATE {
 	EXPECT_HDR1 = 0,    /* Expect header byte 1 */
@@ -217,8 +299,6 @@ static void edge_release(struct usb_serial *serial);
 static int edge_port_probe(struct usb_serial_port *port);
 static int edge_port_remove(struct usb_serial_port *port);
 
-#include "io_tables.h"	/* all of the devices that this driver supports */
-
 /* function prototypes for all of our local functions */
 
 static void  process_rcvd_data(struct edgeport_serial *edge_serial,
@@ -492,20 +572,24 @@ static int get_epic_descriptor(struct edgeport_serial *ep)
 	int result;
 	struct usb_serial *serial = ep->serial;
 	struct edgeport_product_info *product_info = &ep->product_info;
-	struct edge_compatibility_descriptor *epic = &ep->epic_descriptor;
+	struct edge_compatibility_descriptor *epic;
 	struct edge_compatibility_bits *bits;
 	struct device *dev = &serial->dev->dev;
 
 	ep->is_epic = 0;
+
+	epic = kmalloc(sizeof(*epic), GFP_KERNEL);
+	if (!epic)
+		return -ENOMEM;
+
 	result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 				 USB_REQUEST_ION_GET_EPIC_DESC,
 				 0xC0, 0x00, 0x00,
-				 &ep->epic_descriptor,
-				 sizeof(struct edge_compatibility_descriptor),
+				 epic, sizeof(*epic),
 				 300);
-
-	if (result > 0) {
+	if (result == sizeof(*epic)) {
 		ep->is_epic = 1;
+		memcpy(&ep->epic_descriptor, epic, sizeof(*epic));
 		memset(product_info, 0, sizeof(struct edgeport_product_info));
 
 		product_info->NumPorts = epic->NumPorts;
@@ -534,8 +618,16 @@ static int get_epic_descriptor(struct edgeport_serial *ep)
 		dev_dbg(dev, "  IOSPWriteLCR     : %s\n", bits->IOSPWriteLCR	? "TRUE": "FALSE");
 		dev_dbg(dev, "  IOSPSetBaudRate  : %s\n", bits->IOSPSetBaudRate	? "TRUE": "FALSE");
 		dev_dbg(dev, "  TrueEdgeport     : %s\n", bits->TrueEdgeport	? "TRUE": "FALSE");
+
+		result = 0;
+	} else if (result >= 0) {
+		dev_warn(&serial->interface->dev, "short epic descriptor received: %d\n",
+			 result);
+		result = -EIO;
 	}
 
+	kfree(epic);
+
 	return result;
 }
 
@@ -1560,7 +1652,6 @@ static int get_serial_info(struct edgeport_port *edge_port,
 	tmp.line		= edge_port->port->minor;
 	tmp.port		= edge_port->port->port_number;
 	tmp.irq			= 0;
-	tmp.flags		= ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
 	tmp.xmit_fifo_size	= edge_port->maxTxCredits;
 	tmp.baud_base		= 9600;
 	tmp.close_delay		= 5*HZ;
@@ -2090,8 +2181,7 @@ static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr,
  * rom_read
  *	reads a number of bytes from the Edgeport device starting at the given
  *	address.
- *	If successful returns the number of bytes read, otherwise it returns
- *	a negative error number of the problem.
+ *	Returns zero on success or a negative error number.
  ****************************************************************************/
 static int rom_read(struct usb_serial *serial, __u16 extAddr,
 					__u16 addr, __u16 length, __u8 *data)
@@ -2116,12 +2206,17 @@ static int rom_read(struct usb_serial *serial, __u16 extAddr,
 					USB_REQUEST_ION_READ_ROM,
 					0xC0, addr, extAddr, transfer_buffer,
 					current_length, 300);
-		if (result < 0)
+		if (result < current_length) {
+			if (result >= 0)
+				result = -EIO;
 			break;
+		}
 		memcpy(data, transfer_buffer, current_length);
 		length -= current_length;
 		addr += current_length;
 		data += current_length;
+
+		result = 0;
 	}
 
 	kfree(transfer_buffer);
@@ -2575,9 +2670,10 @@ static void get_manufacturing_desc(struct edgeport_serial *edge_serial)
 				EDGE_MANUF_DESC_LEN,
 				(__u8 *)(&edge_serial->manuf_descriptor));
 
-	if (response < 1)
-		dev_err(dev, "error in getting manufacturer descriptor\n");
-	else {
+	if (response < 0) {
+		dev_err(dev, "error in getting manufacturer descriptor: %d\n",
+				response);
+	} else {
 		char string[30];
 		dev_dbg(dev, "**Manufacturer Descriptor\n");
 		dev_dbg(dev, "  RomSize:        %dK\n",
@@ -2634,9 +2730,10 @@ static void get_boot_desc(struct edgeport_serial *edge_serial)
 				EDGE_BOOT_DESC_LEN,
 				(__u8 *)(&edge_serial->boot_descriptor));
 
-	if (response < 1)
-		dev_err(dev, "error in getting boot descriptor\n");
-	else {
+	if (response < 0) {
+		dev_err(dev, "error in getting boot descriptor: %d\n",
+				response);
+	} else {
 		dev_dbg(dev, "**Boot Descriptor:\n");
 		dev_dbg(dev, "  BootCodeLength: %d\n",
 			le16_to_cpu(edge_serial->boot_descriptor.BootCodeLength));
@@ -2779,7 +2876,7 @@ static int edge_startup(struct usb_serial *serial)
 	dev_info(&serial->dev->dev, "%s detected\n", edge_serial->name);
 
 	/* Read the epic descriptor */
-	if (get_epic_descriptor(edge_serial) <= 0) {
+	if (get_epic_descriptor(edge_serial) < 0) {
 		/* memcpy descriptor to Supports structures */
 		memcpy(&edge_serial->epic_descriptor.Supports, descriptor,
 		       sizeof(struct edge_compatibility_bits));
@@ -3015,6 +3112,139 @@ static int edge_port_remove(struct usb_serial_port *port)
 	return 0;
 }
 
+static struct usb_serial_driver edgeport_2port_device = {
+	.driver = {
+		.owner		= THIS_MODULE,
+		.name		= "edgeport_2",
+	},
+	.description		= "Edgeport 2 port adapter",
+	.id_table		= edgeport_2port_id_table,
+	.num_ports		= 2,
+	.open			= edge_open,
+	.close			= edge_close,
+	.throttle		= edge_throttle,
+	.unthrottle		= edge_unthrottle,
+	.attach			= edge_startup,
+	.disconnect		= edge_disconnect,
+	.release		= edge_release,
+	.port_probe		= edge_port_probe,
+	.port_remove		= edge_port_remove,
+	.ioctl			= edge_ioctl,
+	.set_termios		= edge_set_termios,
+	.tiocmget		= edge_tiocmget,
+	.tiocmset		= edge_tiocmset,
+	.tiocmiwait		= usb_serial_generic_tiocmiwait,
+	.get_icount		= usb_serial_generic_get_icount,
+	.write			= edge_write,
+	.write_room		= edge_write_room,
+	.chars_in_buffer	= edge_chars_in_buffer,
+	.break_ctl		= edge_break,
+	.read_int_callback	= edge_interrupt_callback,
+	.read_bulk_callback	= edge_bulk_in_callback,
+	.write_bulk_callback	= edge_bulk_out_data_callback,
+};
+
+static struct usb_serial_driver edgeport_4port_device = {
+	.driver = {
+		.owner		= THIS_MODULE,
+		.name		= "edgeport_4",
+	},
+	.description		= "Edgeport 4 port adapter",
+	.id_table		= edgeport_4port_id_table,
+	.num_ports		= 4,
+	.open			= edge_open,
+	.close			= edge_close,
+	.throttle		= edge_throttle,
+	.unthrottle		= edge_unthrottle,
+	.attach			= edge_startup,
+	.disconnect		= edge_disconnect,
+	.release		= edge_release,
+	.port_probe		= edge_port_probe,
+	.port_remove		= edge_port_remove,
+	.ioctl			= edge_ioctl,
+	.set_termios		= edge_set_termios,
+	.tiocmget		= edge_tiocmget,
+	.tiocmset		= edge_tiocmset,
+	.tiocmiwait		= usb_serial_generic_tiocmiwait,
+	.get_icount		= usb_serial_generic_get_icount,
+	.write			= edge_write,
+	.write_room		= edge_write_room,
+	.chars_in_buffer	= edge_chars_in_buffer,
+	.break_ctl		= edge_break,
+	.read_int_callback	= edge_interrupt_callback,
+	.read_bulk_callback	= edge_bulk_in_callback,
+	.write_bulk_callback	= edge_bulk_out_data_callback,
+};
+
+static struct usb_serial_driver edgeport_8port_device = {
+	.driver = {
+		.owner		= THIS_MODULE,
+		.name		= "edgeport_8",
+	},
+	.description		= "Edgeport 8 port adapter",
+	.id_table		= edgeport_8port_id_table,
+	.num_ports		= 8,
+	.open			= edge_open,
+	.close			= edge_close,
+	.throttle		= edge_throttle,
+	.unthrottle		= edge_unthrottle,
+	.attach			= edge_startup,
+	.disconnect		= edge_disconnect,
+	.release		= edge_release,
+	.port_probe		= edge_port_probe,
+	.port_remove		= edge_port_remove,
+	.ioctl			= edge_ioctl,
+	.set_termios		= edge_set_termios,
+	.tiocmget		= edge_tiocmget,
+	.tiocmset		= edge_tiocmset,
+	.tiocmiwait		= usb_serial_generic_tiocmiwait,
+	.get_icount		= usb_serial_generic_get_icount,
+	.write			= edge_write,
+	.write_room		= edge_write_room,
+	.chars_in_buffer	= edge_chars_in_buffer,
+	.break_ctl		= edge_break,
+	.read_int_callback	= edge_interrupt_callback,
+	.read_bulk_callback	= edge_bulk_in_callback,
+	.write_bulk_callback	= edge_bulk_out_data_callback,
+};
+
+static struct usb_serial_driver epic_device = {
+	.driver = {
+		.owner		= THIS_MODULE,
+		.name		= "epic",
+	},
+	.description		= "EPiC device",
+	.id_table		= Epic_port_id_table,
+	.num_ports		= 1,
+	.open			= edge_open,
+	.close			= edge_close,
+	.throttle		= edge_throttle,
+	.unthrottle		= edge_unthrottle,
+	.attach			= edge_startup,
+	.disconnect		= edge_disconnect,
+	.release		= edge_release,
+	.port_probe		= edge_port_probe,
+	.port_remove		= edge_port_remove,
+	.ioctl			= edge_ioctl,
+	.set_termios		= edge_set_termios,
+	.tiocmget		= edge_tiocmget,
+	.tiocmset		= edge_tiocmset,
+	.tiocmiwait		= usb_serial_generic_tiocmiwait,
+	.get_icount		= usb_serial_generic_get_icount,
+	.write			= edge_write,
+	.write_room		= edge_write_room,
+	.chars_in_buffer	= edge_chars_in_buffer,
+	.break_ctl		= edge_break,
+	.read_int_callback	= edge_interrupt_callback,
+	.read_bulk_callback	= edge_bulk_in_callback,
+	.write_bulk_callback	= edge_bulk_out_data_callback,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&edgeport_2port_device, &edgeport_4port_device,
+	&edgeport_8port_device, &epic_device, NULL
+};
+
 module_usb_serial_driver(serial_drivers, id_table_combined);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h
deleted file mode 100644
index ae5fac5656c9..000000000000
--- a/drivers/usb/serial/io_tables.h
+++ /dev/null
@@ -1,232 +0,0 @@
-/*
- * IO Edgeport Driver tables
- *
- *	Copyright (C) 2001
- *	    Greg Kroah-Hartman (greg@kroah.com)
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- */
-
-#ifndef IO_TABLES_H
-#define IO_TABLES_H
-
-static const struct usb_device_id edgeport_2port_id_table[] = {
-	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_2) },
-	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_2I) },
-	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_421) },
-	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_21) },
-	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_2_DIN) },
-	{ }
-};
-
-static const struct usb_device_id edgeport_4port_id_table[] = {
-	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4) },
-	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_RAPIDPORT_4) },
-	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4T) },
-	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_MT4X56USB) },
-	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4I) },
-	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8_DUAL_CPU) },
-	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4_DIN) },
-	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_22I) },
-	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_412_4) },
-	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_COMPATIBLE) },
-	{ }
-};
-
-static const struct usb_device_id edgeport_8port_id_table[] = {
-	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8) },
-	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_16_DUAL_CPU) },
-	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8I) },
-	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8R) },
-	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8RR) },
-	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_412_8) },
-	{ }
-};
-
-static const struct usb_device_id Epic_port_id_table[] = {
-	{ USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0202) },
-	{ USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0203) },
-	{ USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0310) },
-	{ USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0311) },
-	{ USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0312) },
-	{ USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A758) },
-	{ USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A794) },
-	{ USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A225) },
-	{ }
-};
-
-/* Devices that this driver supports */
-static const struct usb_device_id id_table_combined[] = {
-	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_4) },
-	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_RAPIDPORT_4) },
-	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_4T) },
-	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_MT4X56USB) },
-	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_2) },
-	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_4I) },
-	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_2I) },
-	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_421) },
-	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_21) },
-	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_8_DUAL_CPU) },
-	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_8) },
-	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_2_DIN) },
-	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_4_DIN) },
-	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_16_DUAL_CPU) },
-	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_22I) },
-	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_412_4) },
-	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_COMPATIBLE) },
-	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_8I) },
-	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8R) },
-	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8RR) },
-	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_412_8) },
-	{ USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0202) },
-	{ USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0203) },
-	{ USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0310) },
-	{ USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0311) },
-	{ USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0312) },
-	{ USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A758) },
-	{ USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A794) },
-	{ USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A225) },
-	{ } /* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE(usb, id_table_combined);
-
-static struct usb_serial_driver edgeport_2port_device = {
-	.driver = {
-		.owner		= THIS_MODULE,
-		.name		= "edgeport_2",
-	},
-	.description		= "Edgeport 2 port adapter",
-	.id_table		= edgeport_2port_id_table,
-	.num_ports		= 2,
-	.open			= edge_open,
-	.close			= edge_close,
-	.throttle		= edge_throttle,
-	.unthrottle		= edge_unthrottle,
-	.attach			= edge_startup,
-	.disconnect		= edge_disconnect,
-	.release		= edge_release,
-	.port_probe		= edge_port_probe,
-	.port_remove		= edge_port_remove,
-	.ioctl			= edge_ioctl,
-	.set_termios		= edge_set_termios,
-	.tiocmget		= edge_tiocmget,
-	.tiocmset		= edge_tiocmset,
-	.tiocmiwait		= usb_serial_generic_tiocmiwait,
-	.get_icount		= usb_serial_generic_get_icount,
-	.write			= edge_write,
-	.write_room		= edge_write_room,
-	.chars_in_buffer	= edge_chars_in_buffer,
-	.break_ctl		= edge_break,
-	.read_int_callback	= edge_interrupt_callback,
-	.read_bulk_callback	= edge_bulk_in_callback,
-	.write_bulk_callback	= edge_bulk_out_data_callback,
-};
-
-static struct usb_serial_driver edgeport_4port_device = {
-	.driver = {
-		.owner		= THIS_MODULE,
-		.name		= "edgeport_4",
-	},
-	.description		= "Edgeport 4 port adapter",
-	.id_table		= edgeport_4port_id_table,
-	.num_ports		= 4,
-	.open			= edge_open,
-	.close			= edge_close,
-	.throttle		= edge_throttle,
-	.unthrottle		= edge_unthrottle,
-	.attach			= edge_startup,
-	.disconnect		= edge_disconnect,
-	.release		= edge_release,
-	.port_probe		= edge_port_probe,
-	.port_remove		= edge_port_remove,
-	.ioctl			= edge_ioctl,
-	.set_termios		= edge_set_termios,
-	.tiocmget		= edge_tiocmget,
-	.tiocmset		= edge_tiocmset,
-	.tiocmiwait		= usb_serial_generic_tiocmiwait,
-	.get_icount		= usb_serial_generic_get_icount,
-	.write			= edge_write,
-	.write_room		= edge_write_room,
-	.chars_in_buffer	= edge_chars_in_buffer,
-	.break_ctl		= edge_break,
-	.read_int_callback	= edge_interrupt_callback,
-	.read_bulk_callback	= edge_bulk_in_callback,
-	.write_bulk_callback	= edge_bulk_out_data_callback,
-};
-
-static struct usb_serial_driver edgeport_8port_device = {
-	.driver = {
-		.owner		= THIS_MODULE,
-		.name		= "edgeport_8",
-	},
-	.description		= "Edgeport 8 port adapter",
-	.id_table		= edgeport_8port_id_table,
-	.num_ports		= 8,
-	.open			= edge_open,
-	.close			= edge_close,
-	.throttle		= edge_throttle,
-	.unthrottle		= edge_unthrottle,
-	.attach			= edge_startup,
-	.disconnect		= edge_disconnect,
-	.release		= edge_release,
-	.port_probe		= edge_port_probe,
-	.port_remove		= edge_port_remove,
-	.ioctl			= edge_ioctl,
-	.set_termios		= edge_set_termios,
-	.tiocmget		= edge_tiocmget,
-	.tiocmset		= edge_tiocmset,
-	.tiocmiwait		= usb_serial_generic_tiocmiwait,
-	.get_icount		= usb_serial_generic_get_icount,
-	.write			= edge_write,
-	.write_room		= edge_write_room,
-	.chars_in_buffer	= edge_chars_in_buffer,
-	.break_ctl		= edge_break,
-	.read_int_callback	= edge_interrupt_callback,
-	.read_bulk_callback	= edge_bulk_in_callback,
-	.write_bulk_callback	= edge_bulk_out_data_callback,
-};
-
-static struct usb_serial_driver epic_device = {
-	.driver = {
-		.owner		= THIS_MODULE,
-		.name		= "epic",
-	},
-	.description		= "EPiC device",
-	.id_table		= Epic_port_id_table,
-	.num_ports		= 1,
-	.open			= edge_open,
-	.close			= edge_close,
-	.throttle		= edge_throttle,
-	.unthrottle		= edge_unthrottle,
-	.attach			= edge_startup,
-	.disconnect		= edge_disconnect,
-	.release		= edge_release,
-	.port_probe		= edge_port_probe,
-	.port_remove		= edge_port_remove,
-	.ioctl			= edge_ioctl,
-	.set_termios		= edge_set_termios,
-	.tiocmget		= edge_tiocmget,
-	.tiocmset		= edge_tiocmset,
-	.tiocmiwait		= usb_serial_generic_tiocmiwait,
-	.get_icount		= usb_serial_generic_get_icount,
-	.write			= edge_write,
-	.write_room		= edge_write_room,
-	.chars_in_buffer	= edge_chars_in_buffer,
-	.break_ctl		= edge_break,
-	.read_int_callback	= edge_interrupt_callback,
-	.read_bulk_callback	= edge_bulk_in_callback,
-	.write_bulk_callback	= edge_bulk_out_data_callback,
-};
-
-static struct usb_serial_driver * const serial_drivers[] = {
-	&edgeport_2port_device, &edgeport_4port_device,
-	&edgeport_8port_device, &epic_device, NULL
-};
-
-#endif
-
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 9a0db2965fbb..ceaeebaa6f90 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -2468,7 +2468,6 @@ static int get_serial_info(struct edgeport_port *edge_port,
 	tmp.line		= edge_port->port->minor;
 	tmp.port		= edge_port->port->port_number;
 	tmp.irq			= 0;
-	tmp.flags		= ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
 	tmp.xmit_fifo_size	= edge_port->port->bulk_out_size;
 	tmp.baud_base		= 9600;
 	tmp.close_delay		= 5*HZ;
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index d57fb5199218..030390f37b0a 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -976,7 +976,6 @@ static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	struct device *dev = &port->dev;
-	u8 *buf;
 	int result;
 	int baud;
 	u32 actual;
@@ -991,20 +990,8 @@ static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port)
 	usb_clear_halt(serial->dev, port->write_urb->pipe);
 	usb_clear_halt(serial->dev, port->read_urb->pipe);
 
-	buf = kmalloc(10, GFP_KERNEL);
-	if (buf == NULL)
-		return -ENOMEM;
-
 	priv->poll = 0;
 
-	/* initialize writebuf */
-#define FISH(a, b, c, d) do { \
-	result = usb_control_msg(port->serial->dev,	\
-				usb_rcvctrlpipe(port->serial->dev, 0),	\
-				b, a, c, d, buf, 1, 1000); \
-	dev_dbg(dev, "0x%x:0x%x:0x%x:0x%x  %d - %x\n", a, b, c, d, result, \
-				buf[0]); } while (0);
-
 #define SOUP(a, b, c, d)  do { \
 	result = usb_control_msg(port->serial->dev,	\
 				usb_sndctrlpipe(port->serial->dev, 0),	\
@@ -1017,7 +1004,7 @@ static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port)
 	/* sprintf(buf ,"%c%c%c%c",0x03,0x02,0x02,0x0); */
 
 	SOUP(0x03, 0x02, 0x02, 0x0);
-	kfree(buf);
+
 	iuu_led(port, 0xF000, 0xF000, 0, 0xFF);
 	iuu_uart_on(port);
 	if (boost < 100)
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 1f9414bdd649..5662d324edd2 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -41,11 +41,508 @@
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 #include <linux/usb/ezusb.h>
-#include "keyspan.h"
 
 #define DRIVER_AUTHOR "Hugh Blemings <hugh@misc.nu"
 #define DRIVER_DESC "Keyspan USB to Serial Converter Driver"
 
+/* Function prototypes for Keyspan serial converter */
+static int keyspan_open(struct tty_struct *tty, struct usb_serial_port *port);
+static void keyspan_close(struct usb_serial_port *port);
+static void keyspan_dtr_rts(struct usb_serial_port *port, int on);
+static int keyspan_startup(struct usb_serial *serial);
+static void keyspan_disconnect(struct usb_serial *serial);
+static void keyspan_release(struct usb_serial *serial);
+static int keyspan_port_probe(struct usb_serial_port *port);
+static int keyspan_port_remove(struct usb_serial_port *port);
+static int keyspan_write_room(struct tty_struct *tty);
+static int keyspan_write(struct tty_struct *tty, struct usb_serial_port *port,
+			 const unsigned char *buf, int count);
+static void keyspan_send_setup(struct usb_serial_port *port, int reset_port);
+static void keyspan_set_termios(struct tty_struct *tty,
+				struct usb_serial_port *port,
+				struct ktermios *old);
+static void keyspan_break_ctl(struct tty_struct *tty, int break_state);
+static int keyspan_tiocmget(struct tty_struct *tty);
+static int keyspan_tiocmset(struct tty_struct *tty, unsigned int set,
+			    unsigned int clear);
+static int keyspan_fake_startup(struct usb_serial *serial);
+
+static int keyspan_usa19_calc_baud(struct usb_serial_port *port,
+				   u32 baud_rate, u32 baudclk,
+				   u8 *rate_hi, u8 *rate_low,
+				   u8 *prescaler, int portnum);
+static int keyspan_usa19w_calc_baud(struct usb_serial_port *port,
+				    u32 baud_rate, u32 baudclk,
+				    u8 *rate_hi, u8 *rate_low,
+				    u8 *prescaler, int portnum);
+static int keyspan_usa28_calc_baud(struct usb_serial_port *port,
+				   u32 baud_rate, u32 baudclk,
+				   u8 *rate_hi, u8 *rate_low,
+				   u8 *prescaler, int portnum);
+static int keyspan_usa19hs_calc_baud(struct usb_serial_port *port,
+				     u32 baud_rate, u32 baudclk,
+				     u8 *rate_hi, u8 *rate_low,
+				     u8 *prescaler, int portnum);
+
+static int keyspan_usa28_send_setup(struct usb_serial *serial,
+				    struct usb_serial_port *port,
+				    int reset_port);
+static int keyspan_usa26_send_setup(struct usb_serial *serial,
+				    struct usb_serial_port *port,
+				    int reset_port);
+static int keyspan_usa49_send_setup(struct usb_serial *serial,
+				    struct usb_serial_port *port,
+				    int reset_port);
+static int keyspan_usa90_send_setup(struct usb_serial *serial,
+				    struct usb_serial_port *port,
+				    int reset_port);
+static int keyspan_usa67_send_setup(struct usb_serial *serial,
+				    struct usb_serial_port *port,
+				    int reset_port);
+
+/* Values used for baud rate calculation - device specific */
+#define KEYSPAN_INVALID_BAUD_RATE		(-1)
+#define KEYSPAN_BAUD_RATE_OK			(0)
+#define KEYSPAN_USA18X_BAUDCLK			(12000000L)	/* a guess */
+#define KEYSPAN_USA19_BAUDCLK			(12000000L)
+#define KEYSPAN_USA19W_BAUDCLK			(24000000L)
+#define KEYSPAN_USA19HS_BAUDCLK			(14769231L)
+#define KEYSPAN_USA28_BAUDCLK			(1843200L)
+#define KEYSPAN_USA28X_BAUDCLK			(12000000L)
+#define KEYSPAN_USA49W_BAUDCLK			(48000000L)
+
+/* Some constants used to characterise each device.  */
+#define KEYSPAN_MAX_NUM_PORTS			(4)
+#define KEYSPAN_MAX_FLIPS			(2)
+
+/*
+ * Device info for the Keyspan serial converter, used by the overall
+ * usb-serial probe function.
+ */
+#define KEYSPAN_VENDOR_ID			(0x06cd)
+
+/* Product IDs for the products supported, pre-renumeration */
+#define keyspan_usa18x_pre_product_id		0x0105
+#define keyspan_usa19_pre_product_id		0x0103
+#define keyspan_usa19qi_pre_product_id		0x010b
+#define keyspan_mpr_pre_product_id		0x011b
+#define keyspan_usa19qw_pre_product_id		0x0118
+#define keyspan_usa19w_pre_product_id		0x0106
+#define keyspan_usa28_pre_product_id		0x0101
+#define keyspan_usa28x_pre_product_id		0x0102
+#define keyspan_usa28xa_pre_product_id		0x0114
+#define keyspan_usa28xb_pre_product_id		0x0113
+#define keyspan_usa49w_pre_product_id		0x0109
+#define keyspan_usa49wlc_pre_product_id		0x011a
+
+/*
+ * Product IDs post-renumeration.  Note that the 28x and 28xb have the same
+ * id's post-renumeration but behave identically so it's not an issue. As
+ * such, the 28xb is not listed in any of the device tables.
+ */
+#define keyspan_usa18x_product_id		0x0112
+#define keyspan_usa19_product_id		0x0107
+#define keyspan_usa19qi_product_id		0x010c
+#define keyspan_usa19hs_product_id		0x0121
+#define keyspan_mpr_product_id			0x011c
+#define keyspan_usa19qw_product_id		0x0119
+#define keyspan_usa19w_product_id		0x0108
+#define keyspan_usa28_product_id		0x010f
+#define keyspan_usa28x_product_id		0x0110
+#define keyspan_usa28xa_product_id		0x0115
+#define keyspan_usa28xb_product_id		0x0110
+#define keyspan_usa28xg_product_id		0x0135
+#define keyspan_usa49w_product_id		0x010a
+#define keyspan_usa49wlc_product_id		0x012a
+#define keyspan_usa49wg_product_id		0x0131
+
+struct keyspan_device_details {
+	/* product ID value */
+	int	product_id;
+
+	enum	{msg_usa26, msg_usa28, msg_usa49, msg_usa90, msg_usa67} msg_format;
+
+		/* Number of physical ports */
+	int	num_ports;
+
+		/* 1 if endpoint flipping used on input, 0 if not */
+	int	indat_endp_flip;
+
+		/* 1 if endpoint flipping used on output, 0 if not */
+	int	outdat_endp_flip;
+
+		/*
+		 * Table mapping input data endpoint IDs to physical port
+		 * number and flip if used
+		 */
+	int	indat_endpoints[KEYSPAN_MAX_NUM_PORTS];
+
+		/* Same for output endpoints */
+	int	outdat_endpoints[KEYSPAN_MAX_NUM_PORTS];
+
+		/* Input acknowledge endpoints */
+	int	inack_endpoints[KEYSPAN_MAX_NUM_PORTS];
+
+		/* Output control endpoints */
+	int	outcont_endpoints[KEYSPAN_MAX_NUM_PORTS];
+
+		/* Endpoint used for input status */
+	int	instat_endpoint;
+
+		/* Endpoint used for input data 49WG only */
+	int	indat_endpoint;
+
+		/* Endpoint used for global control functions */
+	int	glocont_endpoint;
+
+	int	(*calculate_baud_rate)(struct usb_serial_port *port,
+				       u32 baud_rate, u32 baudclk,
+				       u8 *rate_hi, u8 *rate_low, u8 *prescaler,
+				       int portnum);
+	u32	baudclk;
+};
+
+/*
+ * Now for each device type we setup the device detail structure with the
+ * appropriate information (provided in Keyspan's documentation)
+ */
+
+static const struct keyspan_device_details usa18x_device_details = {
+	.product_id		= keyspan_usa18x_product_id,
+	.msg_format		= msg_usa26,
+	.num_ports		= 1,
+	.indat_endp_flip	= 0,
+	.outdat_endp_flip	= 1,
+	.indat_endpoints	= {0x81},
+	.outdat_endpoints	= {0x01},
+	.inack_endpoints	= {0x85},
+	.outcont_endpoints	= {0x05},
+	.instat_endpoint	= 0x87,
+	.indat_endpoint		= -1,
+	.glocont_endpoint	= 0x07,
+	.calculate_baud_rate	= keyspan_usa19w_calc_baud,
+	.baudclk		= KEYSPAN_USA18X_BAUDCLK,
+};
+
+static const struct keyspan_device_details usa19_device_details = {
+	.product_id		= keyspan_usa19_product_id,
+	.msg_format		= msg_usa28,
+	.num_ports		= 1,
+	.indat_endp_flip	= 1,
+	.outdat_endp_flip	= 1,
+	.indat_endpoints	= {0x81},
+	.outdat_endpoints	= {0x01},
+	.inack_endpoints	= {0x83},
+	.outcont_endpoints	= {0x03},
+	.instat_endpoint	= 0x84,
+	.indat_endpoint		= -1,
+	.glocont_endpoint	= -1,
+	.calculate_baud_rate	= keyspan_usa19_calc_baud,
+	.baudclk		= KEYSPAN_USA19_BAUDCLK,
+};
+
+static const struct keyspan_device_details usa19qi_device_details = {
+	.product_id		= keyspan_usa19qi_product_id,
+	.msg_format		= msg_usa28,
+	.num_ports		= 1,
+	.indat_endp_flip	= 1,
+	.outdat_endp_flip	= 1,
+	.indat_endpoints	= {0x81},
+	.outdat_endpoints	= {0x01},
+	.inack_endpoints	= {0x83},
+	.outcont_endpoints	= {0x03},
+	.instat_endpoint	= 0x84,
+	.indat_endpoint		= -1,
+	.glocont_endpoint	= -1,
+	.calculate_baud_rate	= keyspan_usa28_calc_baud,
+	.baudclk		= KEYSPAN_USA19_BAUDCLK,
+};
+
+static const struct keyspan_device_details mpr_device_details = {
+	.product_id		= keyspan_mpr_product_id,
+	.msg_format		= msg_usa28,
+	.num_ports		= 1,
+	.indat_endp_flip	= 1,
+	.outdat_endp_flip	= 1,
+	.indat_endpoints	= {0x81},
+	.outdat_endpoints	= {0x01},
+	.inack_endpoints	= {0x83},
+	.outcont_endpoints	= {0x03},
+	.instat_endpoint	= 0x84,
+	.indat_endpoint		= -1,
+	.glocont_endpoint	= -1,
+	.calculate_baud_rate	= keyspan_usa28_calc_baud,
+	.baudclk		= KEYSPAN_USA19_BAUDCLK,
+};
+
+static const struct keyspan_device_details usa19qw_device_details = {
+	.product_id		= keyspan_usa19qw_product_id,
+	.msg_format		= msg_usa26,
+	.num_ports		= 1,
+	.indat_endp_flip	= 0,
+	.outdat_endp_flip	= 1,
+	.indat_endpoints	= {0x81},
+	.outdat_endpoints	= {0x01},
+	.inack_endpoints	= {0x85},
+	.outcont_endpoints	= {0x05},
+	.instat_endpoint	= 0x87,
+	.indat_endpoint		= -1,
+	.glocont_endpoint	= 0x07,
+	.calculate_baud_rate	= keyspan_usa19w_calc_baud,
+	.baudclk		= KEYSPAN_USA19W_BAUDCLK,
+};
+
+static const struct keyspan_device_details usa19w_device_details = {
+	.product_id		= keyspan_usa19w_product_id,
+	.msg_format		= msg_usa26,
+	.num_ports		= 1,
+	.indat_endp_flip	= 0,
+	.outdat_endp_flip	= 1,
+	.indat_endpoints	= {0x81},
+	.outdat_endpoints	= {0x01},
+	.inack_endpoints	= {0x85},
+	.outcont_endpoints	= {0x05},
+	.instat_endpoint	= 0x87,
+	.indat_endpoint		= -1,
+	.glocont_endpoint	= 0x07,
+	.calculate_baud_rate	= keyspan_usa19w_calc_baud,
+	.baudclk		= KEYSPAN_USA19W_BAUDCLK,
+};
+
+static const struct keyspan_device_details usa19hs_device_details = {
+	.product_id		= keyspan_usa19hs_product_id,
+	.msg_format		= msg_usa90,
+	.num_ports		= 1,
+	.indat_endp_flip	= 0,
+	.outdat_endp_flip	= 0,
+	.indat_endpoints	= {0x81},
+	.outdat_endpoints	= {0x01},
+	.inack_endpoints	= {-1},
+	.outcont_endpoints	= {0x02},
+	.instat_endpoint	= 0x82,
+	.indat_endpoint		= -1,
+	.glocont_endpoint	= -1,
+	.calculate_baud_rate	= keyspan_usa19hs_calc_baud,
+	.baudclk		= KEYSPAN_USA19HS_BAUDCLK,
+};
+
+static const struct keyspan_device_details usa28_device_details = {
+	.product_id		= keyspan_usa28_product_id,
+	.msg_format		= msg_usa28,
+	.num_ports		= 2,
+	.indat_endp_flip	= 1,
+	.outdat_endp_flip	= 1,
+	.indat_endpoints	= {0x81, 0x83},
+	.outdat_endpoints	= {0x01, 0x03},
+	.inack_endpoints	= {0x85, 0x86},
+	.outcont_endpoints	= {0x05, 0x06},
+	.instat_endpoint	= 0x87,
+	.indat_endpoint		= -1,
+	.glocont_endpoint	= 0x07,
+	.calculate_baud_rate	= keyspan_usa28_calc_baud,
+	.baudclk		= KEYSPAN_USA28_BAUDCLK,
+};
+
+static const struct keyspan_device_details usa28x_device_details = {
+	.product_id		= keyspan_usa28x_product_id,
+	.msg_format		= msg_usa26,
+	.num_ports		= 2,
+	.indat_endp_flip	= 0,
+	.outdat_endp_flip	= 1,
+	.indat_endpoints	= {0x81, 0x83},
+	.outdat_endpoints	= {0x01, 0x03},
+	.inack_endpoints	= {0x85, 0x86},
+	.outcont_endpoints	= {0x05, 0x06},
+	.instat_endpoint	= 0x87,
+	.indat_endpoint		= -1,
+	.glocont_endpoint	= 0x07,
+	.calculate_baud_rate	= keyspan_usa19w_calc_baud,
+	.baudclk		= KEYSPAN_USA28X_BAUDCLK,
+};
+
+static const struct keyspan_device_details usa28xa_device_details = {
+	.product_id		= keyspan_usa28xa_product_id,
+	.msg_format		= msg_usa26,
+	.num_ports		= 2,
+	.indat_endp_flip	= 0,
+	.outdat_endp_flip	= 1,
+	.indat_endpoints	= {0x81, 0x83},
+	.outdat_endpoints	= {0x01, 0x03},
+	.inack_endpoints	= {0x85, 0x86},
+	.outcont_endpoints	= {0x05, 0x06},
+	.instat_endpoint	= 0x87,
+	.indat_endpoint		= -1,
+	.glocont_endpoint	= 0x07,
+	.calculate_baud_rate	= keyspan_usa19w_calc_baud,
+	.baudclk		= KEYSPAN_USA28X_BAUDCLK,
+};
+
+static const struct keyspan_device_details usa28xg_device_details = {
+	.product_id		= keyspan_usa28xg_product_id,
+	.msg_format		= msg_usa67,
+	.num_ports		= 2,
+	.indat_endp_flip	= 0,
+	.outdat_endp_flip	= 0,
+	.indat_endpoints	= {0x84, 0x88},
+	.outdat_endpoints	= {0x02, 0x06},
+	.inack_endpoints	= {-1, -1},
+	.outcont_endpoints	= {-1, -1},
+	.instat_endpoint	= 0x81,
+	.indat_endpoint		= -1,
+	.glocont_endpoint	= 0x01,
+	.calculate_baud_rate	= keyspan_usa19w_calc_baud,
+	.baudclk		= KEYSPAN_USA28X_BAUDCLK,
+};
+/*
+ * We don't need a separate entry for the usa28xb as it appears as a 28x
+ * anyway.
+ */
+
+static const struct keyspan_device_details usa49w_device_details = {
+	.product_id		= keyspan_usa49w_product_id,
+	.msg_format		= msg_usa49,
+	.num_ports		= 4,
+	.indat_endp_flip	= 0,
+	.outdat_endp_flip	= 0,
+	.indat_endpoints	= {0x81, 0x82, 0x83, 0x84},
+	.outdat_endpoints	= {0x01, 0x02, 0x03, 0x04},
+	.inack_endpoints	= {-1, -1, -1, -1},
+	.outcont_endpoints	= {-1, -1, -1, -1},
+	.instat_endpoint	= 0x87,
+	.indat_endpoint		= -1,
+	.glocont_endpoint	= 0x07,
+	.calculate_baud_rate	= keyspan_usa19w_calc_baud,
+	.baudclk		= KEYSPAN_USA49W_BAUDCLK,
+};
+
+static const struct keyspan_device_details usa49wlc_device_details = {
+	.product_id		= keyspan_usa49wlc_product_id,
+	.msg_format		= msg_usa49,
+	.num_ports		= 4,
+	.indat_endp_flip	= 0,
+	.outdat_endp_flip	= 0,
+	.indat_endpoints	= {0x81, 0x82, 0x83, 0x84},
+	.outdat_endpoints	= {0x01, 0x02, 0x03, 0x04},
+	.inack_endpoints	= {-1, -1, -1, -1},
+	.outcont_endpoints	= {-1, -1, -1, -1},
+	.instat_endpoint	= 0x87,
+	.indat_endpoint		= -1,
+	.glocont_endpoint	= 0x07,
+	.calculate_baud_rate	= keyspan_usa19w_calc_baud,
+	.baudclk		= KEYSPAN_USA19W_BAUDCLK,
+};
+
+static const struct keyspan_device_details usa49wg_device_details = {
+	.product_id		= keyspan_usa49wg_product_id,
+	.msg_format		= msg_usa49,
+	.num_ports		= 4,
+	.indat_endp_flip	= 0,
+	.outdat_endp_flip	= 0,
+	.indat_endpoints	= {-1, -1, -1, -1},	/* single 'global' data in EP */
+	.outdat_endpoints	= {0x01, 0x02, 0x04, 0x06},
+	.inack_endpoints	= {-1, -1, -1, -1},
+	.outcont_endpoints	= {-1, -1, -1, -1},
+	.instat_endpoint	= 0x81,
+	.indat_endpoint		= 0x88,
+	.glocont_endpoint	= 0x00,			/* uses control EP */
+	.calculate_baud_rate	= keyspan_usa19w_calc_baud,
+	.baudclk		= KEYSPAN_USA19W_BAUDCLK,
+};
+
+static const struct keyspan_device_details *keyspan_devices[] = {
+	&usa18x_device_details,
+	&usa19_device_details,
+	&usa19qi_device_details,
+	&mpr_device_details,
+	&usa19qw_device_details,
+	&usa19w_device_details,
+	&usa19hs_device_details,
+	&usa28_device_details,
+	&usa28x_device_details,
+	&usa28xa_device_details,
+	&usa28xg_device_details,
+	/* 28xb not required as it renumerates as a 28x */
+	&usa49w_device_details,
+	&usa49wlc_device_details,
+	&usa49wg_device_details,
+	NULL,
+};
+
+static const struct usb_device_id keyspan_ids_combined[] = {
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19hs_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xg_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id)},
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)},
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wg_product_id)},
+	{ } /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, keyspan_ids_combined);
+
+/* usb_device_id table for the pre-firmware download keyspan devices */
+static const struct usb_device_id keyspan_pre_ids[] = {
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_pre_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_pre_product_id) },
+	{ } /* Terminating entry */
+};
+
+static const struct usb_device_id keyspan_1port_ids[] = {
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19hs_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_product_id) },
+	{ } /* Terminating entry */
+};
+
+static const struct usb_device_id keyspan_2port_ids[] = {
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xg_product_id) },
+	{ } /* Terminating entry */
+};
+
+static const struct usb_device_id keyspan_4port_ids[] = {
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id) },
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)},
+	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wg_product_id)},
+	{ } /* Terminating entry */
+};
+
 #define INSTAT_BUFLEN	32
 #define GLOCONT_BUFLEN	64
 #define INDAT49W_BUFLEN	512
@@ -126,8 +623,6 @@ struct keyspan_port_private {
 #include "keyspan_usa67msg.h"
 
 
-module_usb_serial_driver(serial_drivers, keyspan_ids_combined);
-
 static void keyspan_break_ctl(struct tty_struct *tty, int break_state)
 {
 	struct usb_serial_port *port = tty->driver_data;
@@ -2523,6 +3018,97 @@ static int keyspan_port_remove(struct usb_serial_port *port)
 	return 0;
 }
 
+/* Structs for the devices, pre and post renumeration. */
+static struct usb_serial_driver keyspan_pre_device = {
+	.driver = {
+		.owner		= THIS_MODULE,
+		.name		= "keyspan_no_firm",
+	},
+	.description		= "Keyspan - (without firmware)",
+	.id_table		= keyspan_pre_ids,
+	.num_ports		= 1,
+	.attach			= keyspan_fake_startup,
+};
+
+static struct usb_serial_driver keyspan_1port_device = {
+	.driver = {
+		.owner		= THIS_MODULE,
+		.name		= "keyspan_1",
+	},
+	.description		= "Keyspan 1 port adapter",
+	.id_table		= keyspan_1port_ids,
+	.num_ports		= 1,
+	.open			= keyspan_open,
+	.close			= keyspan_close,
+	.dtr_rts		= keyspan_dtr_rts,
+	.write			= keyspan_write,
+	.write_room		= keyspan_write_room,
+	.set_termios		= keyspan_set_termios,
+	.break_ctl		= keyspan_break_ctl,
+	.tiocmget		= keyspan_tiocmget,
+	.tiocmset		= keyspan_tiocmset,
+	.attach			= keyspan_startup,
+	.disconnect		= keyspan_disconnect,
+	.release		= keyspan_release,
+	.port_probe		= keyspan_port_probe,
+	.port_remove		= keyspan_port_remove,
+};
+
+static struct usb_serial_driver keyspan_2port_device = {
+	.driver = {
+		.owner		= THIS_MODULE,
+		.name		= "keyspan_2",
+	},
+	.description		= "Keyspan 2 port adapter",
+	.id_table		= keyspan_2port_ids,
+	.num_ports		= 2,
+	.open			= keyspan_open,
+	.close			= keyspan_close,
+	.dtr_rts		= keyspan_dtr_rts,
+	.write			= keyspan_write,
+	.write_room		= keyspan_write_room,
+	.set_termios		= keyspan_set_termios,
+	.break_ctl		= keyspan_break_ctl,
+	.tiocmget		= keyspan_tiocmget,
+	.tiocmset		= keyspan_tiocmset,
+	.attach			= keyspan_startup,
+	.disconnect		= keyspan_disconnect,
+	.release		= keyspan_release,
+	.port_probe		= keyspan_port_probe,
+	.port_remove		= keyspan_port_remove,
+};
+
+static struct usb_serial_driver keyspan_4port_device = {
+	.driver = {
+		.owner		= THIS_MODULE,
+		.name		= "keyspan_4",
+	},
+	.description		= "Keyspan 4 port adapter",
+	.id_table		= keyspan_4port_ids,
+	.num_ports		= 4,
+	.open			= keyspan_open,
+	.close			= keyspan_close,
+	.dtr_rts		= keyspan_dtr_rts,
+	.write			= keyspan_write,
+	.write_room		= keyspan_write_room,
+	.set_termios		= keyspan_set_termios,
+	.break_ctl		= keyspan_break_ctl,
+	.tiocmget		= keyspan_tiocmget,
+	.tiocmset		= keyspan_tiocmset,
+	.attach			= keyspan_startup,
+	.disconnect		= keyspan_disconnect,
+	.release		= keyspan_release,
+	.port_probe		= keyspan_port_probe,
+	.port_remove		= keyspan_port_remove,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&keyspan_pre_device, &keyspan_1port_device,
+	&keyspan_2port_device, &keyspan_4port_device, NULL
+};
+
+module_usb_serial_driver(serial_drivers, keyspan_ids_combined);
+
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
deleted file mode 100644
index 0273dda303a4..000000000000
--- a/drivers/usb/serial/keyspan.h
+++ /dev/null
@@ -1,629 +0,0 @@
-/*
-  Keyspan USB to Serial Converter driver
- 
-  (C) Copyright (C) 2000-2001
-      Hugh Blemings <hugh@blemings.org>
-   
-  This program is free software; you can redistribute it and/or modify
-  it under the terms of the GNU General Public License as published by
-  the Free Software Foundation; either version 2 of the License, or
-  (at your option) any later version.
-
-  See http://blemings.org/hugh/keyspan.html for more information.
-  
-  Code in this driver inspired by and in a number of places taken
-  from Brian Warner's original Keyspan-PDA driver.
-
-  This driver has been put together with the support of Innosys, Inc.
-  and Keyspan, Inc the manufacturers of the Keyspan USB-serial products.
-  Thanks Guys :)
-  
-  Thanks to Paulus for miscellaneous tidy ups, some largish chunks
-  of much nicer and/or completely new code and (perhaps most uniquely)
-  having the patience to sit down and explain why and where he'd changed
-  stuff.
-
-  Tip 'o the hat to IBM (and previously Linuxcare :) for supporting 
-  staff in their work on open source projects.
-  
-  See keyspan.c for update history.
-
-*/
-
-#ifndef __LINUX_USB_SERIAL_KEYSPAN_H
-#define __LINUX_USB_SERIAL_KEYSPAN_H
-
-
-/* Function prototypes for Keyspan serial converter */
-static int  keyspan_open		(struct tty_struct *tty,
-					 struct usb_serial_port *port);
-static void keyspan_close		(struct usb_serial_port *port);
-static void keyspan_dtr_rts		(struct usb_serial_port *port, int on);
-static int  keyspan_startup		(struct usb_serial *serial);
-static void keyspan_disconnect		(struct usb_serial *serial);
-static void keyspan_release		(struct usb_serial *serial);
-static int keyspan_port_probe(struct usb_serial_port *port);
-static int keyspan_port_remove(struct usb_serial_port *port);
-static int  keyspan_write_room		(struct tty_struct *tty);
-
-static int  keyspan_write		(struct tty_struct *tty,
-					 struct usb_serial_port *port,
-					 const unsigned char *buf,
-					 int count);
-
-static void keyspan_send_setup		(struct usb_serial_port *port,
-					 int reset_port);
-
-
-static void keyspan_set_termios		(struct tty_struct *tty,
-					 struct usb_serial_port *port,
-					 struct ktermios *old);
-static void keyspan_break_ctl		(struct tty_struct *tty,
-					 int break_state);
-static int  keyspan_tiocmget		(struct tty_struct *tty);
-static int  keyspan_tiocmset		(struct tty_struct *tty,
-					 unsigned int set,
-					 unsigned int clear);
-static int  keyspan_fake_startup	(struct usb_serial *serial);
-
-static int  keyspan_usa19_calc_baud	(struct usb_serial_port *port,
-					 u32 baud_rate, u32 baudclk,
-					 u8 *rate_hi, u8 *rate_low,
-					 u8 *prescaler, int portnum);
-
-static int  keyspan_usa19w_calc_baud	(struct usb_serial_port *port,
-					 u32 baud_rate, u32 baudclk,
-					 u8 *rate_hi, u8 *rate_low,
-					 u8 *prescaler, int portnum);
-
-static int  keyspan_usa28_calc_baud	(struct usb_serial_port *port,
-					 u32 baud_rate, u32 baudclk,
-					 u8 *rate_hi, u8 *rate_low,
-					 u8 *prescaler, int portnum);
-
-static int  keyspan_usa19hs_calc_baud	(struct usb_serial_port *port,
-					 u32 baud_rate, u32 baudclk,
-					 u8 *rate_hi, u8 *rate_low,
-					 u8 *prescaler, int portnum);
-
-static int  keyspan_usa28_send_setup	(struct usb_serial *serial,
-					 struct usb_serial_port *port,
-					 int reset_port);
-static int  keyspan_usa26_send_setup	(struct usb_serial *serial,
-	       				 struct usb_serial_port *port,
-					 int reset_port);
-static int  keyspan_usa49_send_setup	(struct usb_serial *serial,
-					 struct usb_serial_port *port,
-					 int reset_port);
-
-static int  keyspan_usa90_send_setup	(struct usb_serial *serial,
-					 struct usb_serial_port *port,
-					 int reset_port);
-
-static int  keyspan_usa67_send_setup	(struct usb_serial *serial,
-					 struct usb_serial_port *port,
-					 int reset_port);
-
-/* Values used for baud rate calculation - device specific */
-#define	KEYSPAN_INVALID_BAUD_RATE		(-1)
-#define	KEYSPAN_BAUD_RATE_OK			(0)
-#define	KEYSPAN_USA18X_BAUDCLK			(12000000L)	/* a guess */
-#define	KEYSPAN_USA19_BAUDCLK			(12000000L)
-#define	KEYSPAN_USA19W_BAUDCLK			(24000000L)
-#define	KEYSPAN_USA19HS_BAUDCLK			(14769231L)
-#define	KEYSPAN_USA28_BAUDCLK			(1843200L)
-#define	KEYSPAN_USA28X_BAUDCLK			(12000000L)
-#define	KEYSPAN_USA49W_BAUDCLK			(48000000L)
-
-/* Some constants used to characterise each device.  */
-#define		KEYSPAN_MAX_NUM_PORTS		(4)
-#define		KEYSPAN_MAX_FLIPS		(2)
-
-/* Device info for the Keyspan serial converter, used
-   by the overall usb-serial probe function */
-#define KEYSPAN_VENDOR_ID			(0x06cd)
-
-/* Product IDs for the products supported, pre-renumeration */
-#define	keyspan_usa18x_pre_product_id		0x0105
-#define	keyspan_usa19_pre_product_id		0x0103
-#define	keyspan_usa19qi_pre_product_id		0x010b
-#define	keyspan_mpr_pre_product_id		0x011b
-#define	keyspan_usa19qw_pre_product_id		0x0118
-#define	keyspan_usa19w_pre_product_id		0x0106
-#define	keyspan_usa28_pre_product_id		0x0101
-#define	keyspan_usa28x_pre_product_id		0x0102
-#define	keyspan_usa28xa_pre_product_id		0x0114
-#define	keyspan_usa28xb_pre_product_id		0x0113
-#define	keyspan_usa49w_pre_product_id		0x0109
-#define	keyspan_usa49wlc_pre_product_id		0x011a
-
-/* Product IDs post-renumeration.  Note that the 28x and 28xb
-   have the same id's post-renumeration but behave identically
-   so it's not an issue. As such, the 28xb is not listed in any
-   of the device tables. */
-#define	keyspan_usa18x_product_id		0x0112
-#define	keyspan_usa19_product_id		0x0107
-#define	keyspan_usa19qi_product_id		0x010c
-#define	keyspan_usa19hs_product_id		0x0121
-#define	keyspan_mpr_product_id			0x011c
-#define	keyspan_usa19qw_product_id		0x0119
-#define	keyspan_usa19w_product_id		0x0108
-#define	keyspan_usa28_product_id		0x010f
-#define	keyspan_usa28x_product_id		0x0110
-#define	keyspan_usa28xa_product_id		0x0115
-#define	keyspan_usa28xb_product_id		0x0110
-#define	keyspan_usa28xg_product_id		0x0135
-#define	keyspan_usa49w_product_id		0x010a
-#define	keyspan_usa49wlc_product_id		0x012a
-#define	keyspan_usa49wg_product_id		0x0131
-
-struct keyspan_device_details {
-	/* product ID value */
-	int	product_id;
-
-	enum	{msg_usa26, msg_usa28, msg_usa49, msg_usa90, msg_usa67} msg_format;
-
-		/* Number of physical ports */
-	int	num_ports;
-
-		/* 1 if endpoint flipping used on input, 0 if not */
-	int	indat_endp_flip;
-
-		/* 1 if endpoint flipping used on output, 0 if not */
-	int 	outdat_endp_flip;
-
-		/* Table mapping input data endpoint IDs to physical
-		   port number and flip if used */
-	int	indat_endpoints[KEYSPAN_MAX_NUM_PORTS];
-
-		/* Same for output endpoints */
-	int	outdat_endpoints[KEYSPAN_MAX_NUM_PORTS];
-
-		/* Input acknowledge endpoints */
-	int	inack_endpoints[KEYSPAN_MAX_NUM_PORTS];
-
-		/* Output control endpoints */
-	int	outcont_endpoints[KEYSPAN_MAX_NUM_PORTS];
-
-		/* Endpoint used for input status */
-	int	instat_endpoint;
-
-		/* Endpoint used for input data 49WG only */
-	int	indat_endpoint;
-
-		/* Endpoint used for global control functions */
-	int	glocont_endpoint;
-
-	int	(*calculate_baud_rate) (struct usb_serial_port *port,
-					u32 baud_rate, u32 baudclk,
-					u8 *rate_hi, u8 *rate_low, u8 *prescaler, int portnum);
-	u32	baudclk;
-}; 
-
-/* Now for each device type we setup the device detail
-   structure with the appropriate information (provided
-   in Keyspan's documentation) */
-
-static const struct keyspan_device_details usa18x_device_details = {
-	.product_id		= keyspan_usa18x_product_id,
-	.msg_format		= msg_usa26,
-	.num_ports		= 1,
-	.indat_endp_flip	= 0,
-	.outdat_endp_flip	= 1,
-	.indat_endpoints	= {0x81},
-	.outdat_endpoints	= {0x01},
-	.inack_endpoints	= {0x85},
-	.outcont_endpoints	= {0x05},
-	.instat_endpoint	= 0x87,
-	.indat_endpoint		= -1,
-	.glocont_endpoint	= 0x07,
-	.calculate_baud_rate	= keyspan_usa19w_calc_baud,
-	.baudclk		= KEYSPAN_USA18X_BAUDCLK,
-};
-
-static const struct keyspan_device_details usa19_device_details = {
-	.product_id		= keyspan_usa19_product_id,
-	.msg_format		= msg_usa28,
-	.num_ports		= 1,
-	.indat_endp_flip	= 1,
-	.outdat_endp_flip	= 1,
-	.indat_endpoints	= {0x81},
-	.outdat_endpoints	= {0x01},
-	.inack_endpoints	= {0x83},
-	.outcont_endpoints	= {0x03},
-	.instat_endpoint	= 0x84,
-	.indat_endpoint		= -1,
-	.glocont_endpoint	= -1,
-	.calculate_baud_rate	= keyspan_usa19_calc_baud,
-	.baudclk		= KEYSPAN_USA19_BAUDCLK,
-};
-
-static const struct keyspan_device_details usa19qi_device_details = {
-	.product_id		= keyspan_usa19qi_product_id,
-	.msg_format		= msg_usa28,
-	.num_ports		= 1,
-	.indat_endp_flip	= 1,
-	.outdat_endp_flip	= 1,
-	.indat_endpoints	= {0x81},
-	.outdat_endpoints	= {0x01},
-	.inack_endpoints	= {0x83},
-	.outcont_endpoints	= {0x03},
-	.instat_endpoint	= 0x84,
-	.indat_endpoint		= -1,
-	.glocont_endpoint	= -1,
-	.calculate_baud_rate	= keyspan_usa28_calc_baud,
-	.baudclk		= KEYSPAN_USA19_BAUDCLK,
-};
-
-static const struct keyspan_device_details mpr_device_details = {
-	.product_id		= keyspan_mpr_product_id,
-	.msg_format		= msg_usa28,
-	.num_ports		= 1,
-	.indat_endp_flip	= 1,
-	.outdat_endp_flip	= 1,
-	.indat_endpoints	= {0x81},
-	.outdat_endpoints	= {0x01},
-	.inack_endpoints	= {0x83},
-	.outcont_endpoints	= {0x03},
-	.instat_endpoint	= 0x84,
-	.indat_endpoint		= -1,
-	.glocont_endpoint	= -1,
-	.calculate_baud_rate	= keyspan_usa28_calc_baud,
-	.baudclk		= KEYSPAN_USA19_BAUDCLK,
-};
-
-static const struct keyspan_device_details usa19qw_device_details = {
-	.product_id		= keyspan_usa19qw_product_id,
-	.msg_format		= msg_usa26,
-	.num_ports		= 1,
-	.indat_endp_flip	= 0,
-	.outdat_endp_flip	= 1,
-	.indat_endpoints	= {0x81},
-	.outdat_endpoints	= {0x01},
-	.inack_endpoints	= {0x85},
-	.outcont_endpoints	= {0x05},
-	.instat_endpoint	= 0x87,
-	.indat_endpoint		= -1,
-	.glocont_endpoint	= 0x07,
-	.calculate_baud_rate	= keyspan_usa19w_calc_baud,
-	.baudclk		= KEYSPAN_USA19W_BAUDCLK,
-};
-
-static const struct keyspan_device_details usa19w_device_details = {
-	.product_id		= keyspan_usa19w_product_id,
-	.msg_format		= msg_usa26,
-	.num_ports		= 1,
-	.indat_endp_flip	= 0,
-	.outdat_endp_flip	= 1,
-	.indat_endpoints	= {0x81},
-	.outdat_endpoints	= {0x01},
-	.inack_endpoints	= {0x85},
-	.outcont_endpoints	= {0x05},
-	.instat_endpoint	= 0x87,
-	.indat_endpoint		= -1,
-	.glocont_endpoint	= 0x07,
-	.calculate_baud_rate	= keyspan_usa19w_calc_baud,
-	.baudclk		= KEYSPAN_USA19W_BAUDCLK,
-};
-
-static const struct keyspan_device_details usa19hs_device_details = {
-	.product_id		= keyspan_usa19hs_product_id,
-	.msg_format		= msg_usa90,
-	.num_ports		= 1,
-	.indat_endp_flip	= 0,
-	.outdat_endp_flip	= 0,
-	.indat_endpoints	= {0x81},
-	.outdat_endpoints	= {0x01},
-	.inack_endpoints	= {-1},
-	.outcont_endpoints	= {0x02},
-	.instat_endpoint	= 0x82,
-	.indat_endpoint		= -1,
-	.glocont_endpoint	= -1,
-	.calculate_baud_rate	= keyspan_usa19hs_calc_baud,
-	.baudclk		= KEYSPAN_USA19HS_BAUDCLK,
-};
-
-static const struct keyspan_device_details usa28_device_details = {
-	.product_id		= keyspan_usa28_product_id,
-	.msg_format		= msg_usa28,
-	.num_ports		= 2,
-	.indat_endp_flip	= 1,
-	.outdat_endp_flip	= 1,
-	.indat_endpoints	= {0x81, 0x83},
-	.outdat_endpoints	= {0x01, 0x03},
-	.inack_endpoints	= {0x85, 0x86},
-	.outcont_endpoints	= {0x05, 0x06},
-	.instat_endpoint	= 0x87,
-	.indat_endpoint		= -1,
-	.glocont_endpoint	= 0x07,
-	.calculate_baud_rate	= keyspan_usa28_calc_baud,
-	.baudclk		= KEYSPAN_USA28_BAUDCLK,		
-};
-
-static const struct keyspan_device_details usa28x_device_details = {
-	.product_id		= keyspan_usa28x_product_id,
-	.msg_format		= msg_usa26,
-	.num_ports		= 2,
-	.indat_endp_flip	= 0,
-	.outdat_endp_flip	= 1,
-	.indat_endpoints	= {0x81, 0x83},
-	.outdat_endpoints	= {0x01, 0x03},
-	.inack_endpoints	= {0x85, 0x86},
-	.outcont_endpoints	= {0x05, 0x06},
-	.instat_endpoint	= 0x87,
-	.indat_endpoint		= -1,
-	.glocont_endpoint	= 0x07,
-	.calculate_baud_rate	= keyspan_usa19w_calc_baud,
-	.baudclk		= KEYSPAN_USA28X_BAUDCLK,
-};
-
-static const struct keyspan_device_details usa28xa_device_details = {
-	.product_id		= keyspan_usa28xa_product_id,
-	.msg_format		= msg_usa26,
-	.num_ports		= 2,
-	.indat_endp_flip	= 0,
-	.outdat_endp_flip	= 1,
-	.indat_endpoints	= {0x81, 0x83},
-	.outdat_endpoints	= {0x01, 0x03},
-	.inack_endpoints	= {0x85, 0x86},
-	.outcont_endpoints	= {0x05, 0x06},
-	.instat_endpoint	= 0x87,
-	.indat_endpoint		= -1,
-	.glocont_endpoint	= 0x07,
-	.calculate_baud_rate	= keyspan_usa19w_calc_baud,
-	.baudclk		= KEYSPAN_USA28X_BAUDCLK,
-};
-
-static const struct keyspan_device_details usa28xg_device_details = {
-	.product_id		= keyspan_usa28xg_product_id,
-	.msg_format		= msg_usa67,
-	.num_ports		= 2,
-	.indat_endp_flip	= 0,
-	.outdat_endp_flip	= 0,
-	.indat_endpoints	= {0x84, 0x88},
-	.outdat_endpoints	= {0x02, 0x06},
-	.inack_endpoints	= {-1, -1},
-	.outcont_endpoints	= {-1, -1},
-	.instat_endpoint	= 0x81,
-	.indat_endpoint		= -1,
-	.glocont_endpoint	= 0x01,
-	.calculate_baud_rate	= keyspan_usa19w_calc_baud,
-	.baudclk		= KEYSPAN_USA28X_BAUDCLK,
-};
-/* We don't need a separate entry for the usa28xb as it appears as a 28x anyway */
-
-static const struct keyspan_device_details usa49w_device_details = {
-	.product_id		= keyspan_usa49w_product_id,
-	.msg_format		= msg_usa49,
-	.num_ports		= 4,
-	.indat_endp_flip	= 0,
-	.outdat_endp_flip	= 0,
-	.indat_endpoints	= {0x81, 0x82, 0x83, 0x84},
-	.outdat_endpoints	= {0x01, 0x02, 0x03, 0x04},
-	.inack_endpoints	= {-1, -1, -1, -1},
-	.outcont_endpoints	= {-1, -1, -1, -1},
-	.instat_endpoint	= 0x87,
-	.indat_endpoint		= -1,
-	.glocont_endpoint	= 0x07,
-	.calculate_baud_rate	= keyspan_usa19w_calc_baud,
-	.baudclk		= KEYSPAN_USA49W_BAUDCLK,
-};
-
-static const struct keyspan_device_details usa49wlc_device_details = {
-	.product_id		= keyspan_usa49wlc_product_id,
-	.msg_format		= msg_usa49,
-	.num_ports		= 4,
-	.indat_endp_flip	= 0,
-	.outdat_endp_flip	= 0,
-	.indat_endpoints	= {0x81, 0x82, 0x83, 0x84},
-	.outdat_endpoints	= {0x01, 0x02, 0x03, 0x04},
-	.inack_endpoints	= {-1, -1, -1, -1},
-	.outcont_endpoints	= {-1, -1, -1, -1},
-	.instat_endpoint	= 0x87,
-	.indat_endpoint		= -1,
-	.glocont_endpoint	= 0x07,
-	.calculate_baud_rate	= keyspan_usa19w_calc_baud,
-	.baudclk		= KEYSPAN_USA19W_BAUDCLK,
-};
-
-static const struct keyspan_device_details usa49wg_device_details = {
-	.product_id		= keyspan_usa49wg_product_id,
-	.msg_format		= msg_usa49,
-	.num_ports		= 4,
-	.indat_endp_flip	= 0,
-	.outdat_endp_flip	= 0,
-	.indat_endpoints	= {-1, -1, -1, -1},		/* single 'global' data in EP */
-	.outdat_endpoints	= {0x01, 0x02, 0x04, 0x06},
-	.inack_endpoints	= {-1, -1, -1, -1},
-	.outcont_endpoints	= {-1, -1, -1, -1},
-	.instat_endpoint	= 0x81,
-	.indat_endpoint		= 0x88,
-	.glocont_endpoint	= 0x00,				/* uses control EP */
-	.calculate_baud_rate	= keyspan_usa19w_calc_baud,
-	.baudclk		= KEYSPAN_USA19W_BAUDCLK,
-};
-
-static const struct keyspan_device_details *keyspan_devices[] = {
-	&usa18x_device_details,
-	&usa19_device_details,
-	&usa19qi_device_details,
-	&mpr_device_details,
-	&usa19qw_device_details,
-	&usa19w_device_details,
-	&usa19hs_device_details,
-	&usa28_device_details,
-	&usa28x_device_details,
-	&usa28xa_device_details,
-	&usa28xg_device_details,
-	/* 28xb not required as it renumerates as a 28x */
-	&usa49w_device_details,
-	&usa49wlc_device_details,
-	&usa49wg_device_details,
-	NULL,
-};
-
-static const struct usb_device_id keyspan_ids_combined[] = {
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_pre_product_id) },
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_pre_product_id) },
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_pre_product_id) },
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_pre_product_id) },
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_pre_product_id) },
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_pre_product_id) },
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_pre_product_id) },
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_pre_product_id) },
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_pre_product_id) },
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_pre_product_id) },
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_pre_product_id) },
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_pre_product_id) },
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_product_id) },
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_product_id) },
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_product_id) },
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_product_id) },
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_product_id) },
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19hs_product_id) },
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_product_id) },
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) },
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) },
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) },
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xg_product_id) },
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id)},
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)},
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wg_product_id)},
-	{ } /* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE(usb, keyspan_ids_combined);
-
-/* usb_device_id table for the pre-firmware download keyspan devices */
-static const struct usb_device_id keyspan_pre_ids[] = {
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_pre_product_id) },
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_pre_product_id) },
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_pre_product_id) },
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_pre_product_id) },
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_pre_product_id) },
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_pre_product_id) },
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_pre_product_id) },
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_pre_product_id) },
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_pre_product_id) },
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_pre_product_id) },
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_pre_product_id) },
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_pre_product_id) },
-	{ } /* Terminating entry */
-};
-
-static const struct usb_device_id keyspan_1port_ids[] = {
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_product_id) },
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_product_id) },
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_product_id) },
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_product_id) },
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_product_id) },
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19hs_product_id) },
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_product_id) },
-	{ } /* Terminating entry */
-};
-
-static const struct usb_device_id keyspan_2port_ids[] = {
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) },
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) },
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) },
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xg_product_id) },
-	{ } /* Terminating entry */
-};
-
-static const struct usb_device_id keyspan_4port_ids[] = {
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id) },
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)},
-	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wg_product_id)},
-	{ } /* Terminating entry */
-};
-
-/* Structs for the devices, pre and post renumeration. */
-static struct usb_serial_driver keyspan_pre_device = {
-	.driver = {
-		.owner		= THIS_MODULE,
-		.name		= "keyspan_no_firm",
-	},
-	.description		= "Keyspan - (without firmware)",
-	.id_table		= keyspan_pre_ids,
-	.num_ports		= 1,
-	.attach			= keyspan_fake_startup,
-};
-
-static struct usb_serial_driver keyspan_1port_device = {
-	.driver = {
-		.owner		= THIS_MODULE,
-		.name		= "keyspan_1",
-	},
-	.description		= "Keyspan 1 port adapter",
-	.id_table		= keyspan_1port_ids,
-	.num_ports		= 1,
-	.open			= keyspan_open,
-	.close			= keyspan_close,
-	.dtr_rts		= keyspan_dtr_rts,
-	.write			= keyspan_write,
-	.write_room		= keyspan_write_room,
-	.set_termios		= keyspan_set_termios,
-	.break_ctl		= keyspan_break_ctl,
-	.tiocmget		= keyspan_tiocmget,
-	.tiocmset		= keyspan_tiocmset,
-	.attach			= keyspan_startup,
-	.disconnect		= keyspan_disconnect,
-	.release		= keyspan_release,
-	.port_probe		= keyspan_port_probe,
-	.port_remove		= keyspan_port_remove,
-};
-
-static struct usb_serial_driver keyspan_2port_device = {
-	.driver = {
-		.owner		= THIS_MODULE,
-		.name		= "keyspan_2",
-	},
-	.description		= "Keyspan 2 port adapter",
-	.id_table		= keyspan_2port_ids,
-	.num_ports		= 2,
-	.open			= keyspan_open,
-	.close			= keyspan_close,
-	.dtr_rts		= keyspan_dtr_rts,
-	.write			= keyspan_write,
-	.write_room		= keyspan_write_room,
-	.set_termios		= keyspan_set_termios,
-	.break_ctl		= keyspan_break_ctl,
-	.tiocmget		= keyspan_tiocmget,
-	.tiocmset		= keyspan_tiocmset,
-	.attach			= keyspan_startup,
-	.disconnect		= keyspan_disconnect,
-	.release		= keyspan_release,
-	.port_probe		= keyspan_port_probe,
-	.port_remove		= keyspan_port_remove,
-};
-
-static struct usb_serial_driver keyspan_4port_device = {
-	.driver = {
-		.owner		= THIS_MODULE,
-		.name		= "keyspan_4",
-	},
-	.description		= "Keyspan 4 port adapter",
-	.id_table		= keyspan_4port_ids,
-	.num_ports		= 4,
-	.open			= keyspan_open,
-	.close			= keyspan_close,
-	.dtr_rts		= keyspan_dtr_rts,
-	.write			= keyspan_write,
-	.write_room		= keyspan_write_room,
-	.set_termios		= keyspan_set_termios,
-	.break_ctl		= keyspan_break_ctl,
-	.tiocmget		= keyspan_tiocmget,
-	.tiocmset		= keyspan_tiocmset,
-	.attach			= keyspan_startup,
-	.disconnect		= keyspan_disconnect,
-	.release		= keyspan_release,
-	.port_probe		= keyspan_port_probe,
-	.port_remove		= keyspan_port_remove,
-};
-
-static struct usb_serial_driver * const serial_drivers[] = {
-	&keyspan_pre_device, &keyspan_1port_device,
-	&keyspan_2port_device, &keyspan_4port_device, NULL
-};
-
-#endif
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 83523fcf6fb9..d2dab2a341b8 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -139,6 +139,7 @@ static void keyspan_pda_rx_interrupt(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
 	unsigned char *data = urb->transfer_buffer;
+	unsigned int len = urb->actual_length;
 	int retval;
 	int status = urb->status;
 	struct keyspan_pda_private *priv;
@@ -159,18 +160,26 @@ static void keyspan_pda_rx_interrupt(struct urb *urb)
 		goto exit;
 	}
 
+	if (len < 1) {
+		dev_warn(&port->dev, "short message received\n");
+		goto exit;
+	}
+
 	/* see if the message is data or a status interrupt */
 	switch (data[0]) {
 	case 0:
 		 /* rest of message is rx data */
-		if (urb->actual_length) {
-			tty_insert_flip_string(&port->port, data + 1,
-						urb->actual_length - 1);
-			tty_flip_buffer_push(&port->port);
-		}
+		if (len < 2)
+			break;
+		tty_insert_flip_string(&port->port, data + 1, len - 1);
+		tty_flip_buffer_push(&port->port);
 		break;
 	case 1:
 		/* status interrupt */
+		if (len < 3) {
+			dev_warn(&port->dev, "short interrupt message received\n");
+			break;
+		}
 		dev_dbg(&port->dev, "rx int, d1=%d, d2=%d\n", data[1], data[2]);
 		switch (data[1]) {
 		case 1: /* modemline change */
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index 6cb45757818f..595415e59d5d 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -89,7 +89,6 @@ static struct usb_serial_driver kl5kusb105d_device = {
 	.open =			klsi_105_open,
 	.close =		klsi_105_close,
 	.set_termios =		klsi_105_set_termios,
-	/*.break_ctl =		klsi_105_break_ctl,*/
 	.tiocmget =		klsi_105_tiocmget,
 	.port_probe =		klsi_105_port_probe,
 	.port_remove =		klsi_105_port_remove,
@@ -104,16 +103,15 @@ static struct usb_serial_driver * const serial_drivers[] = {
 };
 
 struct klsi_105_port_settings {
-	__u8	pktlen;		/* always 5, it seems */
-	__u8	baudrate;
-	__u8	databits;
-	__u8	unknown1;
-	__u8	unknown2;
-} __attribute__ ((packed));
+	u8	pktlen;		/* always 5, it seems */
+	u8	baudrate;
+	u8	databits;
+	u8	unknown1;
+	u8	unknown2;
+};
 
 struct klsi_105_private {
 	struct klsi_105_port_settings	cfg;
-	struct ktermios			termios;
 	unsigned long			line_state; /* modem line settings */
 	spinlock_t			lock;
 };
@@ -143,10 +141,12 @@ static int klsi_105_chg_port_settings(struct usb_serial_port *port,
 	if (rc < 0)
 		dev_err(&port->dev,
 			"Change port settings failed (error = %d)\n", rc);
-	dev_info(&port->serial->dev->dev,
-		 "%d byte block, baudrate %x, databits %d, u1 %d, u2 %d\n",
-		 settings->pktlen, settings->baudrate, settings->databits,
-		 settings->unknown1, settings->unknown2);
+
+	dev_dbg(&port->dev,
+		"pktlen %u, baudrate 0x%02x, databits %u, u1 %u, u2 %u\n",
+		settings->pktlen, settings->baudrate, settings->databits,
+		settings->unknown1, settings->unknown2);
+
 	return rc;
 }
 
@@ -175,8 +175,6 @@ static int klsi_105_get_line_state(struct usb_serial_port *port,
 	u8 *status_buf;
 	__u16 status;
 
-	dev_info(&port->serial->dev->dev, "sending SIO Poll request\n");
-
 	status_buf = kmalloc(KLSI_STATUSBUF_LEN, GFP_KERNEL);
 	if (!status_buf)
 		return -ENOMEM;
@@ -199,8 +197,8 @@ static int klsi_105_get_line_state(struct usb_serial_port *port,
 	} else {
 		status = get_unaligned_le16(status_buf);
 
-		dev_info(&port->serial->dev->dev, "read status %x %x\n",
-			 status_buf[0], status_buf[1]);
+		dev_dbg(&port->dev, "read status %02x %02x\n",
+			status_buf[0], status_buf[1]);
 
 		*line_state_p = klsi_105_status2linestate(status);
 	}
@@ -233,8 +231,6 @@ static int klsi_105_port_probe(struct usb_serial_port *port)
 
 	spin_lock_init(&priv->lock);
 
-	/* priv->termios is left uninitialized until port opening */
-
 	usb_set_serial_port_data(port, priv);
 
 	return 0;
@@ -255,7 +251,6 @@ static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
 	struct klsi_105_private *priv = usb_get_serial_port_data(port);
 	int retval = 0;
 	int rc;
-	int i;
 	unsigned long line_state;
 	struct klsi_105_port_settings *cfg;
 	unsigned long flags;
@@ -278,14 +273,7 @@ static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
 	cfg->unknown2 = 1;
 	klsi_105_chg_port_settings(port, cfg);
 
-	/* set up termios structure */
 	spin_lock_irqsave(&priv->lock, flags);
-	priv->termios.c_iflag = tty->termios.c_iflag;
-	priv->termios.c_oflag = tty->termios.c_oflag;
-	priv->termios.c_cflag = tty->termios.c_cflag;
-	priv->termios.c_lflag = tty->termios.c_lflag;
-	for (i = 0; i < NCCS; i++)
-		priv->termios.c_cc[i] = tty->termios.c_cc[i];
 	priv->cfg.pktlen   = cfg->pktlen;
 	priv->cfg.baudrate = cfg->baudrate;
 	priv->cfg.databits = cfg->databits;
@@ -438,19 +426,6 @@ static void klsi_105_set_termios(struct tty_struct *tty,
 	 */
 	baud = tty_get_baud_rate(tty);
 
-	if ((cflag & CBAUD) != (old_cflag & CBAUD)) {
-		/* reassert DTR and (maybe) RTS on transition from B0 */
-		if ((old_cflag & CBAUD) == B0) {
-			dev_dbg(dev, "%s: baud was B0\n", __func__);
-#if 0
-			priv->control_state |= TIOCM_DTR;
-			/* don't set RTS if using hardware flow control */
-			if (!(old_cflag & CRTSCTS))
-				priv->control_state |= TIOCM_RTS;
-			mct_u232_set_modem_ctrl(serial, priv->control_state);
-#endif
-		}
-	}
 	switch (baud) {
 	case 0: /* handled below */
 		break;
@@ -484,17 +459,14 @@ static void klsi_105_set_termios(struct tty_struct *tty,
 		baud = 9600;
 		break;
 	}
-	if ((cflag & CBAUD) == B0) {
-		dev_dbg(dev, "%s: baud is B0\n", __func__);
-		/* Drop RTS and DTR */
-		/* maybe this should be simulated by sending read
-		 * disable and read enable messages?
-		 */
-#if 0
-		priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
-		mct_u232_set_modem_ctrl(serial, priv->control_state);
-#endif
-	}
+
+	/*
+	 * FIXME: implement B0 handling
+	 *
+	 * Maybe this should be simulated by sending read disable and read
+	 * enable messages?
+	 */
+
 	tty_encode_baud_rate(tty, baud, baud);
 
 	if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
@@ -528,22 +500,6 @@ static void klsi_105_set_termios(struct tty_struct *tty,
 	    || (cflag & CSTOPB) != (old_cflag & CSTOPB)) {
 		/* Not currently supported */
 		tty->termios.c_cflag &= ~(PARENB|PARODD|CSTOPB);
-#if 0
-		priv->last_lcr = 0;
-
-		/* set the parity */
-		if (cflag & PARENB)
-			priv->last_lcr |= (cflag & PARODD) ?
-				MCT_U232_PARITY_ODD : MCT_U232_PARITY_EVEN;
-		else
-			priv->last_lcr |= MCT_U232_PARITY_NONE;
-
-		/* set the number of stop bits */
-		priv->last_lcr |= (cflag & CSTOPB) ?
-			MCT_U232_STOP_BITS_2 : MCT_U232_STOP_BITS_1;
-
-		mct_u232_set_line_ctrl(serial, priv->last_lcr);
-#endif
 	}
 	/*
 	 * Set flow control: well, I do not really now how to handle DTR/RTS.
@@ -554,14 +510,6 @@ static void klsi_105_set_termios(struct tty_struct *tty,
 	    ||  (cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
 		/* Not currently supported */
 		tty->termios.c_cflag &= ~CRTSCTS;
-		/* Drop DTR/RTS if no flow control otherwise assert */
-#if 0
-		if ((iflag & IXOFF) || (iflag & IXON) || (cflag & CRTSCTS))
-			priv->control_state |= TIOCM_DTR | TIOCM_RTS;
-		else
-			priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
-		mct_u232_set_modem_ctrl(serial, priv->control_state);
-#endif
 	}
 	memcpy(cfg, &priv->cfg, sizeof(*cfg));
 	spin_unlock_irqrestore(&priv->lock, flags);
@@ -572,25 +520,6 @@ err:
 	kfree(cfg);
 }
 
-#if 0
-static void mct_u232_break_ctl(struct tty_struct *tty, int break_state)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct usb_serial *serial = port->serial;
-	struct mct_u232_private *priv =
-				(struct mct_u232_private *)port->private;
-	unsigned char lcr = priv->last_lcr;
-
-	dev_dbg(&port->dev, "%s - state=%d\n", __func__, break_state);
-
-	/* LOCKING */
-	if (break_state)
-		lcr |= MCT_U232_SET_BREAK;
-
-	mct_u232_set_line_ctrl(serial, lcr);
-}
-#endif
-
 static int klsi_105_tiocmget(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index 885655315de1..edbc81f205c2 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -322,8 +322,12 @@ static int mct_u232_get_modem_stat(struct usb_serial_port *port,
 			MCT_U232_GET_REQUEST_TYPE,
 			0, 0, buf, MCT_U232_GET_MODEM_STAT_SIZE,
 			WDR_TIMEOUT);
-	if (rc < 0) {
+	if (rc < MCT_U232_GET_MODEM_STAT_SIZE) {
 		dev_err(&port->dev, "Get MODEM STATus failed (error = %d)\n", rc);
+
+		if (rc >= 0)
+			rc = -EIO;
+
 		*msr = 0;
 	} else {
 		*msr = buf[0];
diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c
index 39e683096e94..cc84da8dbb84 100644
--- a/drivers/usb/serial/metro-usb.c
+++ b/drivers/usb/serial/metro-usb.c
@@ -135,23 +135,8 @@ static void metrousb_read_int_callback(struct urb *urb)
 	throttled = metro_priv->throttled;
 	spin_unlock_irqrestore(&metro_priv->lock, flags);
 
-	/* Continue trying to read if set. */
-	if (!throttled) {
-		usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev,
-				 usb_rcvintpipe(port->serial->dev, port->interrupt_in_endpointAddress),
-				 port->interrupt_in_urb->transfer_buffer,
-				 port->interrupt_in_urb->transfer_buffer_length,
-				 metrousb_read_int_callback, port, 1);
-
-		result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
-
-		if (result)
-			dev_err(&port->dev,
-				"%s - failed submitting interrupt in urb, error code=%d\n",
-				__func__, result);
-	}
-	return;
-
+	if (throttled)
+		return;
 exit:
 	/* Try to resubmit the urb. */
 	result = usb_submit_urb(urb, GFP_ATOMIC);
@@ -161,19 +146,8 @@ exit:
 			__func__, result);
 }
 
-static void metrousb_write_int_callback(struct urb *urb)
-{
-	struct usb_serial_port *port = urb->context;
-
-	dev_warn(&port->dev, "%s not implemented yet.\n",
-		__func__);
-}
-
 static void metrousb_cleanup(struct usb_serial_port *port)
 {
-	dev_dbg(&port->dev, "%s\n", __func__);
-
-	usb_unlink_urb(port->interrupt_in_urb);
 	usb_kill_urb(port->interrupt_in_urb);
 
 	metrousb_send_unidirectional_cmd(UNI_CMD_CLOSE, port);
@@ -186,8 +160,6 @@ static int metrousb_open(struct tty_struct *tty, struct usb_serial_port *port)
 	unsigned long flags = 0;
 	int result = 0;
 
-	dev_dbg(&port->dev, "%s\n", __func__);
-
 	/* Make sure the urb is initialized. */
 	if (!port->interrupt_in_urb) {
 		dev_err(&port->dev, "%s - interrupt urb not initialized\n",
@@ -227,8 +199,6 @@ static int metrousb_open(struct tty_struct *tty, struct usb_serial_port *port)
 			__func__, result);
 		goto exit;
 	}
-
-	dev_dbg(&port->dev, "%s - port open\n", __func__);
 exit:
 	return result;
 }
@@ -290,8 +260,6 @@ static void metrousb_throttle(struct tty_struct *tty)
 	struct metrousb_private *metro_priv = usb_get_serial_port_data(port);
 	unsigned long flags = 0;
 
-	dev_dbg(tty->dev, "%s\n", __func__);
-
 	/* Set the private information for the port to stop reading data. */
 	spin_lock_irqsave(&metro_priv->lock, flags);
 	metro_priv->throttled = 1;
@@ -305,8 +273,6 @@ static int metrousb_tiocmget(struct tty_struct *tty)
 	struct metrousb_private *metro_priv = usb_get_serial_port_data(port);
 	unsigned long flags = 0;
 
-	dev_dbg(tty->dev, "%s\n", __func__);
-
 	spin_lock_irqsave(&metro_priv->lock, flags);
 	control_state = metro_priv->control_state;
 	spin_unlock_irqrestore(&metro_priv->lock, flags);
@@ -350,15 +316,12 @@ static void metrousb_unthrottle(struct tty_struct *tty)
 	unsigned long flags = 0;
 	int result = 0;
 
-	dev_dbg(tty->dev, "%s\n", __func__);
-
 	/* Set the private information for the port to resume reading data. */
 	spin_lock_irqsave(&metro_priv->lock, flags);
 	metro_priv->throttled = 0;
 	spin_unlock_irqrestore(&metro_priv->lock, flags);
 
 	/* Submit the urb to read from the port. */
-	port->interrupt_in_urb->dev = port->serial->dev;
 	result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
 	if (result)
 		dev_err(tty->dev,
@@ -377,7 +340,6 @@ static struct usb_serial_driver metrousb_device = {
 	.open			= metrousb_open,
 	.close			= metrousb_cleanup,
 	.read_int_callback	= metrousb_read_int_callback,
-	.write_int_callback	= metrousb_write_int_callback,
 	.port_probe		= metrousb_port_probe,
 	.port_remove		= metrousb_port_remove,
 	.throttle		= metrousb_throttle,
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 91bc170b408a..f075121c6e32 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -234,11 +234,16 @@ static int read_mos_reg(struct usb_serial *serial, unsigned int serial_portnum,
 
 	status = usb_control_msg(usbdev, pipe, request, requesttype, value,
 				     index, buf, 1, MOS_WDR_TIMEOUT);
-	if (status == 1)
+	if (status == 1) {
 		*data = *buf;
-	else if (status < 0)
+	} else {
 		dev_err(&usbdev->dev,
 			"mos7720: usb_control_msg() failed: %d\n", status);
+		if (status >= 0)
+			status = -EIO;
+		*data = 0;
+	}
+
 	kfree(buf);
 
 	return status;
@@ -1846,7 +1851,6 @@ static int get_serial_info(struct moschip_port *mos7720_port,
 	tmp.line		= mos7720_port->port->minor;
 	tmp.port		= mos7720_port->port->port_number;
 	tmp.irq			= 0;
-	tmp.flags		= ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
 	tmp.xmit_fifo_size	= NUM_URBS * URB_TRANSFER_BUFFER_SIZE;
 	tmp.baud_base		= 9600;
 	tmp.close_delay		= 5*HZ;
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index ea27fb23967a..3821c53fcee9 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -284,9 +284,15 @@ static int mos7840_get_reg_sync(struct usb_serial_port *port, __u16 reg,
 	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ,
 			      MCS_RD_RTYPE, 0, reg, buf, VENDOR_READ_LENGTH,
 			      MOS_WDR_TIMEOUT);
+	if (ret < VENDOR_READ_LENGTH) {
+		if (ret >= 0)
+			ret = -EIO;
+		goto out;
+	}
+
 	*val = buf[0];
 	dev_dbg(&port->dev, "%s offset is %x, return val %x\n", __func__, reg, *val);
-
+out:
 	kfree(buf);
 	return ret;
 }
@@ -352,8 +358,13 @@ static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg,
 	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ,
 			      MCS_RD_RTYPE, Wval, reg, buf, VENDOR_READ_LENGTH,
 			      MOS_WDR_TIMEOUT);
+	if (ret < VENDOR_READ_LENGTH) {
+		if (ret >= 0)
+			ret = -EIO;
+		goto out;
+	}
 	*val = buf[0];
-
+out:
 	kfree(buf);
 	return ret;
 }
@@ -1023,6 +1034,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 	 * (can't set it up in mos7840_startup as the structures *
 	 * were not set up at that time.)                        */
 	if (port0->open_ports == 1) {
+		/* FIXME: Buffer never NULL, so URB is not submitted. */
 		if (serial->port[0]->interrupt_in_buffer == NULL) {
 			/* set up interrupt urb */
 			usb_fill_int_urb(serial->port[0]->interrupt_in_urb,
@@ -1479,10 +1491,10 @@ static int mos7840_tiocmget(struct tty_struct *tty)
 		return -ENODEV;
 
 	status = mos7840_get_uart_reg(port, MODEM_STATUS_REGISTER, &msr);
-	if (status != 1)
+	if (status < 0)
 		return -EIO;
 	status = mos7840_get_uart_reg(port, MODEM_CONTROL_REGISTER, &mcr);
-	if (status != 1)
+	if (status < 0)
 		return -EIO;
 	result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0)
 	    | ((mcr & MCR_RTS) ? TIOCM_RTS : 0)
@@ -1952,7 +1964,6 @@ static int mos7840_get_serial_info(struct moschip_port *mos7840_port,
 	tmp.line = mos7840_port->port->minor;
 	tmp.port = mos7840_port->port->port_number;
 	tmp.irq = 0;
-	tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
 	tmp.xmit_fifo_size = NUM_URBS * URB_TRANSFER_BUFFER_SIZE;
 	tmp.baud_base = 9600;
 	tmp.close_delay = 5 * HZ;
@@ -2106,7 +2117,8 @@ static int mos7840_calc_num_ports(struct usb_serial *serial)
 static int mos7840_attach(struct usb_serial *serial)
 {
 	if (serial->num_bulk_in < serial->num_ports ||
-			serial->num_bulk_out < serial->num_ports) {
+			serial->num_bulk_out < serial->num_ports ||
+			serial->num_interrupt_in < 1) {
 		dev_err(&serial->interface->dev, "missing endpoints\n");
 		return -ENODEV;
 	}
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 5ded6f524d59..3937b9c3cc69 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -142,7 +142,7 @@ static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port)
 	usb_clear_halt(port->serial->dev, port->read_urb->pipe);
 
 	res = usb_serial_generic_open(tty, port);
-	if (!res)
+	if (res)
 		return res;
 
 	/* Request CTS line state, sometimes during opening the current
@@ -343,7 +343,6 @@ static int get_serial_info(struct usb_serial_port *port,
 	tmp.line		= port->minor;
 	tmp.port		= 0;
 	tmp.irq			= 0;
-	tmp.flags		= ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
 	tmp.xmit_fifo_size	= 1024;
 	tmp.baud_base		= 9600;
 	tmp.close_delay		= 5*HZ;
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 1db4b61bdf7b..ca69eb42071b 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -450,7 +450,7 @@ static int pl2303_get_line_request(struct usb_serial_port *port,
 	if (ret != 7) {
 		dev_err(&port->dev, "%s - failed: %d\n", __func__, ret);
 
-		if (ret > 0)
+		if (ret >= 0)
 			ret = -EIO;
 
 		return ret;
@@ -470,12 +470,8 @@ static int pl2303_set_line_request(struct usb_serial_port *port,
 	ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 				SET_LINE_REQUEST, SET_LINE_REQUEST_TYPE,
 				0, 0, buf, 7, 100);
-	if (ret != 7) {
+	if (ret < 0) {
 		dev_err(&port->dev, "%s - failed: %d\n", __func__, ret);
-
-		if (ret > 0)
-			ret = -EIO;
-
 		return ret;
 	}
 
diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c
index 5709cc93b083..fdbb904d153f 100644
--- a/drivers/usb/serial/quatech2.c
+++ b/drivers/usb/serial/quatech2.c
@@ -188,22 +188,22 @@ static inline int qt2_setdevice(struct usb_device *dev, u8 *data)
 }
 
 
-static inline int qt2_getdevice(struct usb_device *dev, u8 *data)
-{
-	return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
-			       QT_SET_GET_DEVICE, 0xc0, 0, 0,
-			       data, 3, QT2_USB_TIMEOUT);
-}
-
 static inline int qt2_getregister(struct usb_device *dev,
 				  u8 uart,
 				  u8 reg,
 				  u8 *data)
 {
-	return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
-			       QT_SET_GET_REGISTER, 0xc0, reg,
-			       uart, data, sizeof(*data), QT2_USB_TIMEOUT);
+	int ret;
+
+	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+			      QT_SET_GET_REGISTER, 0xc0, reg,
+			      uart, data, sizeof(*data), QT2_USB_TIMEOUT);
+	if (ret < sizeof(*data)) {
+		if (ret >= 0)
+			ret = -EIO;
+	}
 
+	return ret;
 }
 
 static inline int qt2_setregister(struct usb_device *dev,
@@ -372,9 +372,11 @@ static int qt2_open(struct tty_struct *tty, struct usb_serial_port *port)
 				 0xc0, 0,
 				 device_port, data, 2, QT2_USB_TIMEOUT);
 
-	if (status < 0) {
+	if (status < 2) {
 		dev_err(&port->dev, "%s - open port failed %i\n", __func__,
 			status);
+		if (status >= 0)
+			status = -EIO;
 		kfree(data);
 		return status;
 	}
@@ -463,7 +465,6 @@ static int get_serial_info(struct usb_serial_port *port,
 	tmp.line		= port->minor;
 	tmp.port		= 0;
 	tmp.irq			= 0;
-	tmp.flags		= ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
 	tmp.xmit_fifo_size	= port->bulk_out_size;
 	tmp.baud_base		= 9600;
 	tmp.close_delay		= 5*HZ;
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index e1994e264cc0..465e851b2815 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -137,24 +137,9 @@ static int is_himemory(const u8 ifnum,
 	return 0;
 }
 
-static int sierra_calc_interface(struct usb_serial *serial)
+static u8 sierra_interface_num(struct usb_serial *serial)
 {
-	int interface;
-	struct usb_interface *p_interface;
-	struct usb_host_interface *p_host_interface;
-
-	/* Get the interface structure pointer from the serial struct */
-	p_interface = serial->interface;
-
-	/* Get a pointer to the host interface structure */
-	p_host_interface = p_interface->cur_altsetting;
-
-	/* read the interface descriptor for this active altsetting
-	 * to find out the interface number we are on
-	*/
-	interface = p_host_interface->desc.bInterfaceNumber;
-
-	return interface;
+	return serial->interface->cur_altsetting->desc.bInterfaceNumber;
 }
 
 static int sierra_probe(struct usb_serial *serial,
@@ -165,7 +150,7 @@ static int sierra_probe(struct usb_serial *serial,
 	u8 ifnum;
 
 	udev = serial->dev;
-	ifnum = sierra_calc_interface(serial);
+	ifnum = sierra_interface_num(serial);
 
 	/*
 	 * If this interface supports more than 1 alternate
@@ -178,9 +163,6 @@ static int sierra_probe(struct usb_serial *serial,
 		usb_set_interface(udev, ifnum, 1);
 	}
 
-	/* ifnum could have changed - by calling usb_set_interface */
-	ifnum = sierra_calc_interface(serial);
-
 	if (is_blacklisted(ifnum,
 				(struct sierra_iface_info *)id->driver_info)) {
 		dev_dbg(&serial->dev->dev,
@@ -342,7 +324,7 @@ static int sierra_send_setup(struct usb_serial_port *port)
 
 	/* If composite device then properly report interface */
 	if (serial->num_ports == 1) {
-		interface = sierra_calc_interface(serial);
+		interface = sierra_interface_num(serial);
 		/* Control message is sent only to interfaces with
 		 * interrupt_in endpoints
 		 */
@@ -916,7 +898,7 @@ static int sierra_port_probe(struct usb_serial_port *port)
 	/* Determine actual memory requirements */
 	if (serial->num_ports == 1) {
 		/* Get interface number for composite device */
-		ifnum = sierra_calc_interface(serial);
+		ifnum = sierra_interface_num(serial);
 		himemoryp = &typeB_interface_list;
 	} else {
 		/* This is really the usb-serial port number of the interface
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 475e6c31b266..ddfd787c461c 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -232,11 +232,17 @@ static int spcp8x5_get_msr(struct usb_serial_port *port, u8 *status)
 	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
 			      GET_UART_STATUS, GET_UART_STATUS_TYPE,
 			      0, GET_UART_STATUS_MSR, buf, 1, 100);
-	if (ret < 0)
+	if (ret < 1) {
 		dev_err(&port->dev, "failed to get modem status: %d\n", ret);
+		if (ret >= 0)
+			ret = -EIO;
+		goto out;
+	}
 
 	dev_dbg(&port->dev, "0xc0:0x22:0:6  %d - 0x02%x\n", ret, *buf);
 	*status = *buf;
+	ret = 0;
+out:
 	kfree(buf);
 
 	return ret;
diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c
index 2a156144c76c..5aa7bbbeba3d 100644
--- a/drivers/usb/serial/ssu100.c
+++ b/drivers/usb/serial/ssu100.c
@@ -80,9 +80,17 @@ static inline int ssu100_setdevice(struct usb_device *dev, u8 *data)
 
 static inline int ssu100_getdevice(struct usb_device *dev, u8 *data)
 {
-	return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
-			       QT_SET_GET_DEVICE, 0xc0, 0, 0,
-			       data, 3, 300);
+	int ret;
+
+	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+			      QT_SET_GET_DEVICE, 0xc0, 0, 0,
+			      data, 3, 300);
+	if (ret < 3) {
+		if (ret >= 0)
+			ret = -EIO;
+	}
+
+	return ret;
 }
 
 static inline int ssu100_getregister(struct usb_device *dev,
@@ -90,10 +98,17 @@ static inline int ssu100_getregister(struct usb_device *dev,
 				     unsigned short reg,
 				     u8 *data)
 {
-	return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
-			       QT_SET_GET_REGISTER, 0xc0, reg,
-			       uart, data, sizeof(*data), 300);
+	int ret;
+
+	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+			      QT_SET_GET_REGISTER, 0xc0, reg,
+			      uart, data, sizeof(*data), 300);
+	if (ret < sizeof(*data)) {
+		if (ret >= 0)
+			ret = -EIO;
+	}
 
+	return ret;
 }
 
 
@@ -289,8 +304,10 @@ static int ssu100_open(struct tty_struct *tty, struct usb_serial_port *port)
 				 QT_OPEN_CLOSE_CHANNEL,
 				 QT_TRANSFER_IN, 0x01,
 				 0, data, 2, 300);
-	if (result < 0) {
+	if (result < 2) {
 		dev_dbg(&port->dev, "%s - open failed %i\n", __func__, result);
+		if (result >= 0)
+			result = -EIO;
 		kfree(data);
 		return result;
 	}
@@ -322,7 +339,6 @@ static int get_serial_info(struct usb_serial_port *port,
 	tmp.line		= port->minor;
 	tmp.port		= 0;
 	tmp.irq			= 0;
-	tmp.flags		= ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
 	tmp.xmit_fifo_size	= port->bulk_out_size;
 	tmp.baud_base		= 9600;
 	tmp.close_delay		= 5*HZ;
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 64b85b8dedf3..3107bf5d1c96 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -1553,13 +1553,10 @@ static int ti_command_out_sync(struct ti_device *tdev, __u8 command,
 		(USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT),
 		value, moduleid, data, size, 1000);
 
-	if (status == size)
-		status = 0;
-
-	if (status > 0)
-		status = -ECOMM;
+	if (status < 0)
+		return status;
 
-	return status;
+	return 0;
 }
 
 
@@ -1575,8 +1572,7 @@ static int ti_command_in_sync(struct ti_device *tdev, __u8 command,
 
 	if (status == size)
 		status = 0;
-
-	if (status > 0)
+	else if (status >= 0)
 		status = -ECOMM;
 
 	return status;
diff --git a/drivers/usb/serial/upd78f0730.c b/drivers/usb/serial/upd78f0730.c
new file mode 100644
index 000000000000..a028dd2310c9
--- /dev/null
+++ b/drivers/usb/serial/upd78f0730.c
@@ -0,0 +1,441 @@
+/*
+ * Renesas Electronics uPD78F0730 USB to serial converter driver
+ *
+ * Copyright (C) 2014,2016 Maksim Salau <maksim.salau@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * Protocol of the adaptor is described in the application note U19660EJ1V0AN00
+ * μPD78F0730 8-bit Single-Chip Microcontroller
+ * USB-to-Serial Conversion Software
+ * <https://www.renesas.com/en-eu/doc/DocumentServer/026/U19660EJ1V0AN00.pdf>
+ *
+ * The adaptor functionality is limited to the following:
+ * - data bits: 7 or 8
+ * - stop bits: 1 or 2
+ * - parity: even, odd or none
+ * - flow control: none
+ * - baud rates: 0, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 153600
+ * - signals: DTR, RTS and BREAK
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+#define DRIVER_DESC "Renesas uPD78F0730 USB to serial converter driver"
+
+#define DRIVER_AUTHOR "Maksim Salau <maksim.salau@gmail.com>"
+
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(0x0409, 0x0063) }, /* V850ESJX3-STICK */
+	{ USB_DEVICE(0x045B, 0x0212) }, /* YRPBRL78G13, YRPBRL78G14 */
+	{ USB_DEVICE(0x064B, 0x7825) }, /* Analog Devices EVAL-ADXL362Z-DB */
+	{}
+};
+
+MODULE_DEVICE_TABLE(usb, id_table);
+
+/*
+ * Each adaptor is associated with a private structure, that holds the current
+ * state of control signals (DTR, RTS and BREAK).
+ */
+struct upd78f0730_port_private {
+	struct mutex	lock;		/* mutex to protect line_signals */
+	u8		line_signals;
+};
+
+/* Op-codes of control commands */
+#define UPD78F0730_CMD_LINE_CONTROL	0x00
+#define UPD78F0730_CMD_SET_DTR_RTS	0x01
+#define UPD78F0730_CMD_SET_XON_XOFF_CHR	0x02
+#define UPD78F0730_CMD_OPEN_CLOSE	0x03
+#define UPD78F0730_CMD_SET_ERR_CHR	0x04
+
+/* Data sizes in UPD78F0730_CMD_LINE_CONTROL command */
+#define UPD78F0730_DATA_SIZE_7_BITS	0x00
+#define UPD78F0730_DATA_SIZE_8_BITS	0x01
+#define UPD78F0730_DATA_SIZE_MASK	0x01
+
+/* Stop-bit modes in UPD78F0730_CMD_LINE_CONTROL command */
+#define UPD78F0730_STOP_BIT_1_BIT	0x00
+#define UPD78F0730_STOP_BIT_2_BIT	0x02
+#define UPD78F0730_STOP_BIT_MASK	0x02
+
+/* Parity modes in UPD78F0730_CMD_LINE_CONTROL command */
+#define UPD78F0730_PARITY_NONE	0x00
+#define UPD78F0730_PARITY_EVEN	0x04
+#define UPD78F0730_PARITY_ODD	0x08
+#define UPD78F0730_PARITY_MASK	0x0C
+
+/* Flow control modes in UPD78F0730_CMD_LINE_CONTROL command */
+#define UPD78F0730_FLOW_CONTROL_NONE	0x00
+#define UPD78F0730_FLOW_CONTROL_HW	0x10
+#define UPD78F0730_FLOW_CONTROL_SW	0x20
+#define UPD78F0730_FLOW_CONTROL_MASK	0x30
+
+/* Control signal bits in UPD78F0730_CMD_SET_DTR_RTS command */
+#define UPD78F0730_RTS		0x01
+#define UPD78F0730_DTR		0x02
+#define UPD78F0730_BREAK	0x04
+
+/* Port modes in UPD78F0730_CMD_OPEN_CLOSE command */
+#define UPD78F0730_PORT_CLOSE	0x00
+#define UPD78F0730_PORT_OPEN	0x01
+
+/* Error character substitution modes in UPD78F0730_CMD_SET_ERR_CHR command */
+#define UPD78F0730_ERR_CHR_DISABLED	0x00
+#define UPD78F0730_ERR_CHR_ENABLED	0x01
+
+/*
+ * Declaration of command structures
+ */
+
+/* UPD78F0730_CMD_LINE_CONTROL command */
+struct upd78f0730_line_control {
+	u8	opcode;
+	__le32	baud_rate;
+	u8	params;
+} __packed;
+
+/* UPD78F0730_CMD_SET_DTR_RTS command */
+struct upd78f0730_set_dtr_rts {
+	u8 opcode;
+	u8 params;
+};
+
+/* UPD78F0730_CMD_SET_XON_OFF_CHR command */
+struct upd78f0730_set_xon_xoff_chr {
+	u8 opcode;
+	u8 xon;
+	u8 xoff;
+};
+
+/* UPD78F0730_CMD_OPEN_CLOSE command */
+struct upd78f0730_open_close {
+	u8 opcode;
+	u8 state;
+};
+
+/* UPD78F0730_CMD_SET_ERR_CHR command */
+struct upd78f0730_set_err_chr {
+	u8 opcode;
+	u8 state;
+	u8 err_char;
+};
+
+static int upd78f0730_send_ctl(struct usb_serial_port *port,
+			const void *data, int size)
+{
+	struct usb_device *usbdev = port->serial->dev;
+	void *buf;
+	int res;
+
+	if (size <= 0 || !data)
+		return -EINVAL;
+
+	buf = kmemdup(data, size, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	res = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0), 0x00,
+			USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
+			0x0000, 0x0000, buf, size, USB_CTRL_SET_TIMEOUT);
+
+	kfree(buf);
+
+	if (res != size) {
+		struct device *dev = &port->dev;
+
+		dev_err(dev, "failed to send control request %02x: %d\n",
+			*(u8 *)data, res);
+		/* The maximum expected length of a transfer is 6 bytes */
+		if (res >= 0)
+			res = -EIO;
+
+		return res;
+	}
+
+	return 0;
+}
+
+static int upd78f0730_port_probe(struct usb_serial_port *port)
+{
+	struct upd78f0730_port_private *private;
+
+	private = kzalloc(sizeof(*private), GFP_KERNEL);
+	if (!private)
+		return -ENOMEM;
+
+	mutex_init(&private->lock);
+	usb_set_serial_port_data(port, private);
+
+	return 0;
+}
+
+static int upd78f0730_port_remove(struct usb_serial_port *port)
+{
+	struct upd78f0730_port_private *private;
+
+	private = usb_get_serial_port_data(port);
+	mutex_destroy(&private->lock);
+	kfree(private);
+
+	return 0;
+}
+
+static int upd78f0730_tiocmget(struct tty_struct *tty)
+{
+	struct device *dev = tty->dev;
+	struct upd78f0730_port_private *private;
+	struct usb_serial_port *port = tty->driver_data;
+	int signals;
+	int res;
+
+	private = usb_get_serial_port_data(port);
+
+	mutex_lock(&private->lock);
+	signals = private->line_signals;
+	mutex_unlock(&private->lock);
+
+	res = ((signals & UPD78F0730_DTR) ? TIOCM_DTR : 0) |
+		((signals & UPD78F0730_RTS) ? TIOCM_RTS : 0);
+
+	dev_dbg(dev, "%s - res = %x\n", __func__, res);
+
+	return res;
+}
+
+static int upd78f0730_tiocmset(struct tty_struct *tty,
+			unsigned int set, unsigned int clear)
+{
+	struct device *dev = tty->dev;
+	struct usb_serial_port *port = tty->driver_data;
+	struct upd78f0730_port_private *private;
+	struct upd78f0730_set_dtr_rts request;
+	int res;
+
+	private = usb_get_serial_port_data(port);
+
+	mutex_lock(&private->lock);
+	if (set & TIOCM_DTR) {
+		private->line_signals |= UPD78F0730_DTR;
+		dev_dbg(dev, "%s - set DTR\n", __func__);
+	}
+	if (set & TIOCM_RTS) {
+		private->line_signals |= UPD78F0730_RTS;
+		dev_dbg(dev, "%s - set RTS\n", __func__);
+	}
+	if (clear & TIOCM_DTR) {
+		private->line_signals &= ~UPD78F0730_DTR;
+		dev_dbg(dev, "%s - clear DTR\n", __func__);
+	}
+	if (clear & TIOCM_RTS) {
+		private->line_signals &= ~UPD78F0730_RTS;
+		dev_dbg(dev, "%s - clear RTS\n", __func__);
+	}
+	request.opcode = UPD78F0730_CMD_SET_DTR_RTS;
+	request.params = private->line_signals;
+
+	res = upd78f0730_send_ctl(port, &request, sizeof(request));
+	mutex_unlock(&private->lock);
+
+	return res;
+}
+
+static void upd78f0730_break_ctl(struct tty_struct *tty, int break_state)
+{
+	struct device *dev = tty->dev;
+	struct upd78f0730_port_private *private;
+	struct usb_serial_port *port = tty->driver_data;
+	struct upd78f0730_set_dtr_rts request;
+
+	private = usb_get_serial_port_data(port);
+
+	mutex_lock(&private->lock);
+	if (break_state) {
+		private->line_signals |= UPD78F0730_BREAK;
+		dev_dbg(dev, "%s - set BREAK\n", __func__);
+	} else {
+		private->line_signals &= ~UPD78F0730_BREAK;
+		dev_dbg(dev, "%s - clear BREAK\n", __func__);
+	}
+	request.opcode = UPD78F0730_CMD_SET_DTR_RTS;
+	request.params = private->line_signals;
+
+	upd78f0730_send_ctl(port, &request, sizeof(request));
+	mutex_unlock(&private->lock);
+}
+
+static void upd78f0730_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct tty_struct *tty = port->port.tty;
+	unsigned int set = 0;
+	unsigned int clear = 0;
+
+	if (on)
+		set = TIOCM_DTR | TIOCM_RTS;
+	else
+		clear = TIOCM_DTR | TIOCM_RTS;
+
+	upd78f0730_tiocmset(tty, set, clear);
+}
+
+static speed_t upd78f0730_get_baud_rate(struct tty_struct *tty)
+{
+	const speed_t baud_rate = tty_get_baud_rate(tty);
+	const speed_t supported[] = {
+		0, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 153600
+	};
+	int i;
+
+	for (i = ARRAY_SIZE(supported) - 1; i >= 0; i--) {
+		if (baud_rate == supported[i])
+			return baud_rate;
+	}
+
+	/* If the baud rate is not supported, switch to the default one */
+	tty_encode_baud_rate(tty, 9600, 9600);
+
+	return tty_get_baud_rate(tty);
+}
+
+static void upd78f0730_set_termios(struct tty_struct *tty,
+				struct usb_serial_port *port,
+				struct ktermios *old_termios)
+{
+	struct device *dev = &port->dev;
+	struct upd78f0730_line_control request;
+	speed_t baud_rate;
+
+	if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios))
+		return;
+
+	if (C_BAUD(tty) == B0)
+		upd78f0730_dtr_rts(port, 0);
+	else if (old_termios && (old_termios->c_cflag & CBAUD) == B0)
+		upd78f0730_dtr_rts(port, 1);
+
+	baud_rate = upd78f0730_get_baud_rate(tty);
+	request.opcode = UPD78F0730_CMD_LINE_CONTROL;
+	request.baud_rate = cpu_to_le32(baud_rate);
+	request.params = 0;
+	dev_dbg(dev, "%s - baud rate = %d\n", __func__, baud_rate);
+
+	switch (C_CSIZE(tty)) {
+	case CS7:
+		request.params |= UPD78F0730_DATA_SIZE_7_BITS;
+		dev_dbg(dev, "%s - 7 data bits\n", __func__);
+		break;
+	default:
+		tty->termios.c_cflag &= ~CSIZE;
+		tty->termios.c_cflag |= CS8;
+		dev_warn(dev, "data size is not supported, using 8 bits\n");
+		/* fall through */
+	case CS8:
+		request.params |= UPD78F0730_DATA_SIZE_8_BITS;
+		dev_dbg(dev, "%s - 8 data bits\n", __func__);
+		break;
+	}
+
+	if (C_PARENB(tty)) {
+		if (C_PARODD(tty)) {
+			request.params |= UPD78F0730_PARITY_ODD;
+			dev_dbg(dev, "%s - odd parity\n", __func__);
+		} else {
+			request.params |= UPD78F0730_PARITY_EVEN;
+			dev_dbg(dev, "%s - even parity\n", __func__);
+		}
+
+		if (C_CMSPAR(tty)) {
+			tty->termios.c_cflag &= ~CMSPAR;
+			dev_warn(dev, "MARK/SPACE parity is not supported\n");
+		}
+	} else {
+		request.params |= UPD78F0730_PARITY_NONE;
+		dev_dbg(dev, "%s - no parity\n", __func__);
+	}
+
+	if (C_CSTOPB(tty)) {
+		request.params |= UPD78F0730_STOP_BIT_2_BIT;
+		dev_dbg(dev, "%s - 2 stop bits\n", __func__);
+	} else {
+		request.params |= UPD78F0730_STOP_BIT_1_BIT;
+		dev_dbg(dev, "%s - 1 stop bit\n", __func__);
+	}
+
+	if (C_CRTSCTS(tty)) {
+		tty->termios.c_cflag &= ~CRTSCTS;
+		dev_warn(dev, "RTSCTS flow control is not supported\n");
+	}
+	if (I_IXOFF(tty) || I_IXON(tty)) {
+		tty->termios.c_iflag &= ~(IXOFF | IXON);
+		dev_warn(dev, "XON/XOFF flow control is not supported\n");
+	}
+	request.params |= UPD78F0730_FLOW_CONTROL_NONE;
+	dev_dbg(dev, "%s - no flow control\n", __func__);
+
+	upd78f0730_send_ctl(port, &request, sizeof(request));
+}
+
+static int upd78f0730_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct upd78f0730_open_close request = {
+		.opcode = UPD78F0730_CMD_OPEN_CLOSE,
+		.state = UPD78F0730_PORT_OPEN
+	};
+	int res;
+
+	res = upd78f0730_send_ctl(port, &request, sizeof(request));
+	if (res)
+		return res;
+
+	if (tty)
+		upd78f0730_set_termios(tty, port, NULL);
+
+	return usb_serial_generic_open(tty, port);
+}
+
+static void upd78f0730_close(struct usb_serial_port *port)
+{
+	struct upd78f0730_open_close request = {
+		.opcode = UPD78F0730_CMD_OPEN_CLOSE,
+		.state = UPD78F0730_PORT_CLOSE
+	};
+
+	usb_serial_generic_close(port);
+	upd78f0730_send_ctl(port, &request, sizeof(request));
+}
+
+static struct usb_serial_driver upd78f0730_device = {
+	.driver	 = {
+		.owner	= THIS_MODULE,
+		.name	= "upd78f0730",
+	},
+	.id_table	= id_table,
+	.num_ports	= 1,
+	.port_probe	= upd78f0730_port_probe,
+	.port_remove	= upd78f0730_port_remove,
+	.open		= upd78f0730_open,
+	.close		= upd78f0730_close,
+	.set_termios	= upd78f0730_set_termios,
+	.tiocmget	= upd78f0730_tiocmget,
+	.tiocmset	= upd78f0730_tiocmset,
+	.dtr_rts	= upd78f0730_dtr_rts,
+	.break_ctl	= upd78f0730_break_ctl,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&upd78f0730_device,
+	NULL
+};
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index d3ea90bef84d..5ab65eb1dacc 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -487,7 +487,6 @@ static int whiteheat_ioctl(struct tty_struct *tty,
 		serstruct.type = PORT_16654;
 		serstruct.line = port->minor;
 		serstruct.port = port->port_number;
-		serstruct.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
 		serstruct.xmit_fifo_size = kfifo_size(&port->write_fifo);
 		serstruct.custom_divisor = 0;
 		serstruct.baud_base = 460800;