Merge tag 'v4.10-rc6' into devel

Linux 4.10-rc6

Resolved conflicts in:
	drivers/pinctrl/pinctrl-amd.c
	drivers/pinctrl/samsung/pinctrl-exynos.c

18 files changed, 245 insertions, 97 deletions

diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index 2597b83a8ae2..95aa5233726c 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -95,6 +95,7 @@ struct ch341_private {
 	unsigned baud_rate; /* set baud rate */
 	u8 line_control; /* set line control value RTS/DTR */
 	u8 line_status; /* active status of modem control inputs */
+	u8 lcr;
 };
 
 static void ch341_set_termios(struct tty_struct *tty,
@@ -112,6 +113,8 @@ static int ch341_control_out(struct usb_device *dev, u8 request,
 	r = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request,
 			    USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
 			    value, index, NULL, 0, DEFAULT_TIMEOUT);
+	if (r < 0)
+		dev_err(&dev->dev, "failed to send control message: %d\n", r);
 
 	return r;
 }
@@ -129,11 +132,24 @@ static int ch341_control_in(struct usb_device *dev,
 	r = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), request,
 			    USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
 			    value, index, buf, bufsize, DEFAULT_TIMEOUT);
-	return r;
+	if (r < bufsize) {
+		if (r >= 0) {
+			dev_err(&dev->dev,
+				"short control message received (%d < %u)\n",
+				r, bufsize);
+			r = -EIO;
+		}
+
+		dev_err(&dev->dev, "failed to receive control message: %d\n",
+			r);
+		return r;
+	}
+
+	return 0;
 }
 
-static int ch341_init_set_baudrate(struct usb_device *dev,
-				   struct ch341_private *priv, unsigned ctrl)
+static int ch341_set_baudrate_lcr(struct usb_device *dev,
+				  struct ch341_private *priv, u8 lcr)
 {
 	short a;
 	int r;
@@ -156,9 +172,19 @@ static int ch341_init_set_baudrate(struct usb_device *dev,
 	factor = 0x10000 - factor;
 	a = (factor & 0xff00) | divisor;
 
-	/* 0x9c is "enable SFR_UART Control register and timer" */
-	r = ch341_control_out(dev, CH341_REQ_SERIAL_INIT,
-			      0x9c | (ctrl << 8), a | 0x80);
+	/*
+	 * CH341A buffers data until a full endpoint-size packet (32 bytes)
+	 * has been received unless bit 7 is set.
+	 */
+	a |= BIT(7);
+
+	r = ch341_control_out(dev, CH341_REQ_WRITE_REG, 0x1312, a);
+	if (r)
+		return r;
+
+	r = ch341_control_out(dev, CH341_REQ_WRITE_REG, 0x2518, lcr);
+	if (r)
+		return r;
 
 	return r;
 }
@@ -170,9 +196,9 @@ static int ch341_set_handshake(struct usb_device *dev, u8 control)
 
 static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv)
 {
+	const unsigned int size = 2;
 	char *buffer;
 	int r;
-	const unsigned size = 8;
 	unsigned long flags;
 
 	buffer = kmalloc(size, GFP_KERNEL);
@@ -183,14 +209,9 @@ static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv)
 	if (r < 0)
 		goto out;
 
-	/* setup the private status if available */
-	if (r == 2) {
-		r = 0;
-		spin_lock_irqsave(&priv->lock, flags);
-		priv->line_status = (~(*buffer)) & CH341_BITS_MODEM_STAT;
-		spin_unlock_irqrestore(&priv->lock, flags);
-	} else
-		r = -EPROTO;
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->line_status = (~(*buffer)) & CH341_BITS_MODEM_STAT;
+	spin_unlock_irqrestore(&priv->lock, flags);
 
 out:	kfree(buffer);
 	return r;
@@ -200,9 +221,9 @@ out:	kfree(buffer);
 
 static int ch341_configure(struct usb_device *dev, struct ch341_private *priv)
 {
+	const unsigned int size = 2;
 	char *buffer;
 	int r;
-	const unsigned size = 8;
 
 	buffer = kmalloc(size, GFP_KERNEL);
 	if (!buffer)
@@ -232,7 +253,7 @@ static int ch341_configure(struct usb_device *dev, struct ch341_private *priv)
 	if (r < 0)
 		goto out;
 
-	r = ch341_init_set_baudrate(dev, priv, 0);
+	r = ch341_set_baudrate_lcr(dev, priv, priv->lcr);
 	if (r < 0)
 		goto out;
 
@@ -258,7 +279,6 @@ static int ch341_port_probe(struct usb_serial_port *port)
 
 	spin_lock_init(&priv->lock);
 	priv->baud_rate = DEFAULT_BAUD_RATE;
-	priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR;
 
 	r = ch341_configure(port->serial->dev, priv);
 	if (r < 0)
@@ -320,7 +340,7 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port)
 
 	r = ch341_configure(serial->dev, priv);
 	if (r)
-		goto out;
+		return r;
 
 	if (tty)
 		ch341_set_termios(tty, port, NULL);
@@ -330,12 +350,19 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port)
 	if (r) {
 		dev_err(&port->dev, "%s - failed to submit interrupt urb: %d\n",
 			__func__, r);
-		goto out;
+		return r;
 	}
 
 	r = usb_serial_generic_open(tty, port);
+	if (r)
+		goto err_kill_interrupt_urb;
+
+	return 0;
+
+err_kill_interrupt_urb:
+	usb_kill_urb(port->interrupt_in_urb);
 
-out:	return r;
+	return r;
 }
 
 /* Old_termios contains the original termios settings and
@@ -356,7 +383,6 @@ static void ch341_set_termios(struct tty_struct *tty,
 
 	baud_rate = tty_get_baud_rate(tty);
 
-	priv->baud_rate = baud_rate;
 	ctrl = CH341_LCR_ENABLE_RX | CH341_LCR_ENABLE_TX;
 
 	switch (C_CSIZE(tty)) {
@@ -386,22 +412,25 @@ static void ch341_set_termios(struct tty_struct *tty,
 		ctrl |= CH341_LCR_STOP_BITS_2;
 
 	if (baud_rate) {
-		spin_lock_irqsave(&priv->lock, flags);
-		priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS);
-		spin_unlock_irqrestore(&priv->lock, flags);
-		r = ch341_init_set_baudrate(port->serial->dev, priv, ctrl);
+		priv->baud_rate = baud_rate;
+
+		r = ch341_set_baudrate_lcr(port->serial->dev, priv, ctrl);
 		if (r < 0 && old_termios) {
 			priv->baud_rate = tty_termios_baud_rate(old_termios);
 			tty_termios_copy_hw(&tty->termios, old_termios);
+		} else if (r == 0) {
+			priv->lcr = ctrl;
 		}
-	} else {
-		spin_lock_irqsave(&priv->lock, flags);
-		priv->line_control &= ~(CH341_BIT_DTR | CH341_BIT_RTS);
-		spin_unlock_irqrestore(&priv->lock, flags);
 	}
 
-	ch341_set_handshake(port->serial->dev, priv->line_control);
+	spin_lock_irqsave(&priv->lock, flags);
+	if (C_BAUD(tty) == B0)
+		priv->line_control &= ~(CH341_BIT_DTR | CH341_BIT_RTS);
+	else if (old_termios && (old_termios->c_cflag & CBAUD) == B0)
+		priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS);
+	spin_unlock_irqrestore(&priv->lock, flags);
 
+	ch341_set_handshake(port->serial->dev, priv->line_control);
 }
 
 static void ch341_break_ctl(struct tty_struct *tty, int break_state)
@@ -576,14 +605,23 @@ static int ch341_tiocmget(struct tty_struct *tty)
 
 static int ch341_reset_resume(struct usb_serial *serial)
 {
-	struct ch341_private *priv;
-
-	priv = usb_get_serial_port_data(serial->port[0]);
+	struct usb_serial_port *port = serial->port[0];
+	struct ch341_private *priv = usb_get_serial_port_data(port);
+	int ret;
 
 	/* reconfigure ch341 serial port after bus-reset */
 	ch341_configure(serial->dev, priv);
 
-	return 0;
+	if (tty_port_initialized(&port->port)) {
+		ret = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
+		if (ret) {
+			dev_err(&port->dev, "failed to submit interrupt urb: %d\n",
+				ret);
+			return ret;
+		}
+	}
+
+	return usb_serial_generic_resume(serial);
 }
 
 static struct usb_serial_driver ch341_device = {
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index 5f17a3b9916d..80260b08398b 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -50,6 +50,7 @@
 #define CYBERJACK_PRODUCT_ID	0x0100
 
 /* Function prototypes */
+static int cyberjack_attach(struct usb_serial *serial);
 static int cyberjack_port_probe(struct usb_serial_port *port);
 static int cyberjack_port_remove(struct usb_serial_port *port);
 static int  cyberjack_open(struct tty_struct *tty,
@@ -77,6 +78,7 @@ static struct usb_serial_driver cyberjack_device = {
 	.description =		"Reiner SCT Cyberjack USB card reader",
 	.id_table =		id_table,
 	.num_ports =		1,
+	.attach =		cyberjack_attach,
 	.port_probe =		cyberjack_port_probe,
 	.port_remove =		cyberjack_port_remove,
 	.open =			cyberjack_open,
@@ -100,6 +102,14 @@ struct cyberjack_private {
 	short		wrsent;		/* Data already sent */
 };
 
+static int cyberjack_attach(struct usb_serial *serial)
+{
+	if (serial->num_bulk_out < serial->num_ports)
+		return -ENODEV;
+
+	return 0;
+}
+
 static int cyberjack_port_probe(struct usb_serial_port *port)
 {
 	struct cyberjack_private *priv;
diff --git a/drivers/usb/serial/f81534.c b/drivers/usb/serial/f81534.c
index 8282a6a18fee..22f23a429a95 100644
--- a/drivers/usb/serial/f81534.c
+++ b/drivers/usb/serial/f81534.c
@@ -1237,6 +1237,7 @@ static int f81534_attach(struct usb_serial *serial)
 static int f81534_port_probe(struct usb_serial_port *port)
 {
 	struct f81534_port_private *port_priv;
+	int ret;
 
 	port_priv = devm_kzalloc(&port->dev, sizeof(*port_priv), GFP_KERNEL);
 	if (!port_priv)
@@ -1246,10 +1247,11 @@ static int f81534_port_probe(struct usb_serial_port *port)
 	mutex_init(&port_priv->mcr_mutex);
 
 	/* Assign logic-to-phy mapping */
-	port_priv->phy_num = f81534_logic_to_phy_port(port->serial, port);
-	if (port_priv->phy_num < 0 || port_priv->phy_num >= F81534_NUM_PORT)
-		return -ENODEV;
+	ret = f81534_logic_to_phy_port(port->serial, port);
+	if (ret < 0)
+		return ret;
 
+	port_priv->phy_num = ret;
 	usb_set_serial_port_data(port, port_priv);
 	dev_dbg(&port->dev, "%s: port_number: %d, phy_num: %d\n", __func__,
 			port->port_number, port_priv->phy_num);
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 97cabf803c2f..b2f2e87aed94 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -1043,6 +1043,7 @@ static int garmin_write_bulk(struct usb_serial_port *port,
 		   "%s - usb_submit_urb(write bulk) failed with status = %d\n",
 				__func__, status);
 		count = status;
+		kfree(buffer);
 	}
 
 	/* we are done with this urb, so let the host driver
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index dcc0c58aaad5..d50e5773483f 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -2751,6 +2751,11 @@ static int edge_startup(struct usb_serial *serial)
 					EDGE_COMPATIBILITY_MASK1,
 					EDGE_COMPATIBILITY_MASK2 };
 
+	if (serial->num_bulk_in < 1 || serial->num_interrupt_in < 1) {
+		dev_err(&serial->interface->dev, "missing endpoints\n");
+		return -ENODEV;
+	}
+
 	dev = serial->dev;
 
 	/* create our private serial structure */
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index c339163698eb..9a0db2965fbb 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -1499,8 +1499,7 @@ static int do_boot_mode(struct edgeport_serial *serial,
 
 		dev_dbg(dev, "%s - Download successful -- Device rebooting...\n", __func__);
 
-		/* return an error on purpose */
-		return -ENODEV;
+		return 1;
 	}
 
 stayinbootmode:
@@ -1508,7 +1507,7 @@ stayinbootmode:
 	dev_dbg(dev, "%s - STAYING IN BOOT MODE\n", __func__);
 	serial->product_info.TiMode = TI_MODE_BOOT;
 
-	return 0;
+	return 1;
 }
 
 static int ti_do_config(struct edgeport_port *port, int feature, int on)
@@ -2546,6 +2545,13 @@ static int edge_startup(struct usb_serial *serial)
 	int status;
 	u16 product_id;
 
+	/* Make sure we have the required endpoints when in download mode. */
+	if (serial->interface->cur_altsetting->desc.bNumEndpoints > 1) {
+		if (serial->num_bulk_in < serial->num_ports ||
+				serial->num_bulk_out < serial->num_ports)
+			return -ENODEV;
+	}
+
 	/* create our private serial structure */
 	edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL);
 	if (!edge_serial)
@@ -2553,14 +2559,18 @@ static int edge_startup(struct usb_serial *serial)
 
 	mutex_init(&edge_serial->es_lock);
 	edge_serial->serial = serial;
+	INIT_DELAYED_WORK(&edge_serial->heartbeat_work, edge_heartbeat_work);
 	usb_set_serial_data(serial, edge_serial);
 
 	status = download_fw(edge_serial);
-	if (status) {
+	if (status < 0) {
 		kfree(edge_serial);
 		return status;
 	}
 
+	if (status > 0)
+		return 1;	/* bind but do not register any ports */
+
 	product_id = le16_to_cpu(
 			edge_serial->serial->dev->descriptor.idProduct);
 
@@ -2572,7 +2582,6 @@ static int edge_startup(struct usb_serial *serial)
 		}
 	}
 
-	INIT_DELAYED_WORK(&edge_serial->heartbeat_work, edge_heartbeat_work);
 	edge_heartbeat_schedule(edge_serial);
 
 	return 0;
@@ -2580,6 +2589,9 @@ static int edge_startup(struct usb_serial *serial)
 
 static void edge_disconnect(struct usb_serial *serial)
 {
+	struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
+
+	cancel_delayed_work_sync(&edge_serial->heartbeat_work);
 }
 
 static void edge_release(struct usb_serial *serial)
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 344b4eea4bd5..d57fb5199218 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -68,6 +68,16 @@ struct iuu_private {
 	u32 clk;
 };
 
+static int iuu_attach(struct usb_serial *serial)
+{
+	unsigned char num_ports = serial->num_ports;
+
+	if (serial->num_bulk_in < num_ports || serial->num_bulk_out < num_ports)
+		return -ENODEV;
+
+	return 0;
+}
+
 static int iuu_port_probe(struct usb_serial_port *port)
 {
 	struct iuu_private *priv;
@@ -1196,6 +1206,7 @@ static struct usb_serial_driver iuu_device = {
 	.tiocmset = iuu_tiocmset,
 	.set_termios = iuu_set_termios,
 	.init_termios = iuu_init_termios,
+	.attach = iuu_attach,
 	.port_probe = iuu_port_probe,
 	.port_remove = iuu_port_remove,
 };
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index e49ad0c63ad8..83523fcf6fb9 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -699,6 +699,19 @@ MODULE_FIRMWARE("keyspan_pda/keyspan_pda.fw");
 MODULE_FIRMWARE("keyspan_pda/xircom_pgs.fw");
 #endif
 
+static int keyspan_pda_attach(struct usb_serial *serial)
+{
+	unsigned char num_ports = serial->num_ports;
+
+	if (serial->num_bulk_out < num_ports ||
+			serial->num_interrupt_in < num_ports) {
+		dev_err(&serial->interface->dev, "missing endpoints\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
 static int keyspan_pda_port_probe(struct usb_serial_port *port)
 {
 
@@ -776,6 +789,7 @@ static struct usb_serial_driver keyspan_pda_device = {
 	.break_ctl =		keyspan_pda_break_ctl,
 	.tiocmget =		keyspan_pda_tiocmget,
 	.tiocmset =		keyspan_pda_tiocmset,
+	.attach =		keyspan_pda_attach,
 	.port_probe =		keyspan_pda_port_probe,
 	.port_remove =		keyspan_pda_port_remove,
 };
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index 0ee190fc1bf8..6cb45757818f 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -192,10 +192,11 @@ static int klsi_105_get_line_state(struct usb_serial_port *port,
 			     status_buf, KLSI_STATUSBUF_LEN,
 			     10000
 			     );
-	if (rc < 0)
-		dev_err(&port->dev, "Reading line status failed (error = %d)\n",
-			rc);
-	else {
+	if (rc != KLSI_STATUSBUF_LEN) {
+		dev_err(&port->dev, "reading line status failed: %d\n", rc);
+		if (rc >= 0)
+			rc = -EIO;
+	} else {
 		status = get_unaligned_le16(status_buf);
 
 		dev_info(&port->serial->dev->dev, "read status %x %x\n",
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 2363654cafc9..813035f51fe7 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -51,6 +51,7 @@
 
 
 /* Function prototypes */
+static int kobil_attach(struct usb_serial *serial);
 static int kobil_port_probe(struct usb_serial_port *probe);
 static int kobil_port_remove(struct usb_serial_port *probe);
 static int  kobil_open(struct tty_struct *tty, struct usb_serial_port *port);
@@ -86,6 +87,7 @@ static struct usb_serial_driver kobil_device = {
 	.description =		"KOBIL USB smart card terminal",
 	.id_table =		id_table,
 	.num_ports =		1,
+	.attach =		kobil_attach,
 	.port_probe =		kobil_port_probe,
 	.port_remove =		kobil_port_remove,
 	.ioctl =		kobil_ioctl,
@@ -113,6 +115,16 @@ struct kobil_private {
 };
 
 
+static int kobil_attach(struct usb_serial *serial)
+{
+	if (serial->num_interrupt_out < serial->num_ports) {
+		dev_err(&serial->interface->dev, "missing interrupt-out endpoint\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
 static int kobil_port_probe(struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index d52caa03679c..91bc170b408a 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -65,8 +65,6 @@ struct moschip_port {
 	struct urb		*write_urb_pool[NUM_URBS];
 };
 
-static struct usb_serial_driver moschip7720_2port_driver;
-
 #define USB_VENDOR_ID_MOSCHIP		0x9710
 #define MOSCHIP_DEVICE_ID_7720		0x7720
 #define MOSCHIP_DEVICE_ID_7715		0x7715
@@ -970,25 +968,6 @@ static void mos7720_bulk_out_data_callback(struct urb *urb)
 		tty_port_tty_wakeup(&mos7720_port->port->port);
 }
 
-/*
- * mos77xx_probe
- *	this function installs the appropriate read interrupt endpoint callback
- *	depending on whether the device is a 7720 or 7715, thus avoiding costly
- *	run-time checks in the high-frequency callback routine itself.
- */
-static int mos77xx_probe(struct usb_serial *serial,
-			 const struct usb_device_id *id)
-{
-	if (id->idProduct == MOSCHIP_DEVICE_ID_7715)
-		moschip7720_2port_driver.read_int_callback =
-			mos7715_interrupt_callback;
-	else
-		moschip7720_2port_driver.read_int_callback =
-			mos7720_interrupt_callback;
-
-	return 0;
-}
-
 static int mos77xx_calc_num_ports(struct usb_serial *serial)
 {
 	u16 product = le16_to_cpu(serial->dev->descriptor.idProduct);
@@ -1917,6 +1896,11 @@ static int mos7720_startup(struct usb_serial *serial)
 	u16 product;
 	int ret_val;
 
+	if (serial->num_bulk_in < 2 || serial->num_bulk_out < 2) {
+		dev_err(&serial->interface->dev, "missing bulk endpoints\n");
+		return -ENODEV;
+	}
+
 	product = le16_to_cpu(serial->dev->descriptor.idProduct);
 	dev = serial->dev;
 
@@ -1941,19 +1925,18 @@ static int mos7720_startup(struct usb_serial *serial)
 			tmp->interrupt_in_endpointAddress;
 		serial->port[1]->interrupt_in_urb = NULL;
 		serial->port[1]->interrupt_in_buffer = NULL;
+
+		if (serial->port[0]->interrupt_in_urb) {
+			struct urb *urb = serial->port[0]->interrupt_in_urb;
+
+			urb->complete = mos7715_interrupt_callback;
+		}
 	}
 
 	/* setting configuration feature to one */
 	usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 			(__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5000);
 
-	/* start the interrupt urb */
-	ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL);
-	if (ret_val)
-		dev_err(&dev->dev,
-			"%s - Error %d submitting control urb\n",
-			__func__, ret_val);
-
 #ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT
 	if (product == MOSCHIP_DEVICE_ID_7715) {
 		ret_val = mos7715_parport_init(serial);
@@ -1961,6 +1944,13 @@ static int mos7720_startup(struct usb_serial *serial)
 			return ret_val;
 	}
 #endif
+	/* start the interrupt urb */
+	ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL);
+	if (ret_val) {
+		dev_err(&dev->dev, "failed to submit interrupt urb: %d\n",
+			ret_val);
+	}
+
 	/* LSR For Port 1 */
 	read_mos_reg(serial, 0, MOS7720_LSR, &data);
 	dev_dbg(&dev->dev, "LSR:%x\n", data);
@@ -1970,6 +1960,8 @@ static int mos7720_startup(struct usb_serial *serial)
 
 static void mos7720_release(struct usb_serial *serial)
 {
+	usb_kill_urb(serial->port[0]->interrupt_in_urb);
+
 #ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT
 	/* close the parallel port */
 
@@ -2019,11 +2011,6 @@ static int mos7720_port_probe(struct usb_serial_port *port)
 	if (!mos7720_port)
 		return -ENOMEM;
 
-	/* Initialize all port interrupt end point to port 0 int endpoint.
-	 * Our device has only one interrupt endpoint common to all ports.
-	 */
-	port->interrupt_in_endpointAddress =
-		port->serial->port[0]->interrupt_in_endpointAddress;
 	mos7720_port->port = port;
 
 	usb_set_serial_port_data(port, mos7720_port);
@@ -2053,7 +2040,6 @@ static struct usb_serial_driver moschip7720_2port_driver = {
 	.close			= mos7720_close,
 	.throttle		= mos7720_throttle,
 	.unthrottle		= mos7720_unthrottle,
-	.probe			= mos77xx_probe,
 	.attach			= mos7720_startup,
 	.release		= mos7720_release,
 	.port_probe		= mos7720_port_probe,
@@ -2067,7 +2053,7 @@ static struct usb_serial_driver moschip7720_2port_driver = {
 	.chars_in_buffer	= mos7720_chars_in_buffer,
 	.break_ctl		= mos7720_break,
 	.read_bulk_callback	= mos7720_bulk_in_callback,
-	.read_int_callback	= NULL  /* dynamically assigned in probe() */
+	.read_int_callback	= mos7720_interrupt_callback,
 };
 
 static struct usb_serial_driver * const serial_drivers[] = {
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 9a220b8e810f..ea27fb23967a 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -214,7 +214,6 @@ MODULE_DEVICE_TABLE(usb, id_table);
 
 struct moschip_port {
 	int port_num;		/*Actual port number in the device(1,2,etc) */
-	struct urb *write_urb;	/* write URB for this port */
 	struct urb *read_urb;	/* read URB for this port */
 	__u8 shadowLCR;		/* last LCR value received */
 	__u8 shadowMCR;		/* last MCR value received */
@@ -1037,9 +1036,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 				serial,
 				serial->port[0]->interrupt_in_urb->interval);
 
-			/* start interrupt read for mos7840               *
-			 * will continue as long as mos7840 is connected  */
-
+			/* start interrupt read for mos7840 */
 			response =
 			    usb_submit_urb(serial->port[0]->interrupt_in_urb,
 					   GFP_KERNEL);
@@ -1186,7 +1183,6 @@ static void mos7840_close(struct usb_serial_port *port)
 		}
 	}
 
-	usb_kill_urb(mos7840_port->write_urb);
 	usb_kill_urb(mos7840_port->read_urb);
 	mos7840_port->read_urb_busy = false;
 
@@ -1199,12 +1195,6 @@ static void mos7840_close(struct usb_serial_port *port)
 		}
 	}
 
-	if (mos7840_port->write_urb) {
-		/* if this urb had a transfer buffer already (old tx) free it */
-		kfree(mos7840_port->write_urb->transfer_buffer);
-		usb_free_urb(mos7840_port->write_urb);
-	}
-
 	Data = 0x0;
 	mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
 
@@ -2113,6 +2103,17 @@ static int mos7840_calc_num_ports(struct usb_serial *serial)
 	return mos7840_num_ports;
 }
 
+static int mos7840_attach(struct usb_serial *serial)
+{
+	if (serial->num_bulk_in < serial->num_ports ||
+			serial->num_bulk_out < serial->num_ports) {
+		dev_err(&serial->interface->dev, "missing endpoints\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
 static int mos7840_port_probe(struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
@@ -2388,6 +2389,7 @@ static struct usb_serial_driver moschip7840_4port_device = {
 	.tiocmset = mos7840_tiocmset,
 	.tiocmiwait = usb_serial_generic_tiocmiwait,
 	.get_icount = usb_serial_generic_get_icount,
+	.attach = mos7840_attach,
 	.port_probe = mos7840_port_probe,
 	.port_remove = mos7840_port_remove,
 	.read_bulk_callback = mos7840_bulk_in_callback,
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index f6c6900bccf0..a180b17d2432 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -38,6 +38,7 @@ static int  omninet_write(struct tty_struct *tty, struct usb_serial_port *port,
 				const unsigned char *buf, int count);
 static int  omninet_write_room(struct tty_struct *tty);
 static void omninet_disconnect(struct usb_serial *serial);
+static int omninet_attach(struct usb_serial *serial);
 static int omninet_port_probe(struct usb_serial_port *port);
 static int omninet_port_remove(struct usb_serial_port *port);
 
@@ -56,6 +57,7 @@ static struct usb_serial_driver zyxel_omninet_device = {
 	.description =		"ZyXEL - omni.net lcd plus usb",
 	.id_table =		id_table,
 	.num_ports =		1,
+	.attach =		omninet_attach,
 	.port_probe =		omninet_port_probe,
 	.port_remove =		omninet_port_remove,
 	.open =			omninet_open,
@@ -104,6 +106,17 @@ struct omninet_data {
 	__u8	od_outseq;	/* Sequence number for bulk_out URBs */
 };
 
+static int omninet_attach(struct usb_serial *serial)
+{
+	/* The second bulk-out endpoint is used for writing. */
+	if (serial->num_bulk_out < 2) {
+		dev_err(&serial->interface->dev, "missing endpoints\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
 static int omninet_port_probe(struct usb_serial_port *port)
 {
 	struct omninet_data *od;
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index a4b88bc038b6..b8bf52bf7a94 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -134,6 +134,7 @@ static int oti6858_chars_in_buffer(struct tty_struct *tty);
 static int oti6858_tiocmget(struct tty_struct *tty);
 static int oti6858_tiocmset(struct tty_struct *tty,
 				unsigned int set, unsigned int clear);
+static int oti6858_attach(struct usb_serial *serial);
 static int oti6858_port_probe(struct usb_serial_port *port);
 static int oti6858_port_remove(struct usb_serial_port *port);
 
@@ -158,6 +159,7 @@ static struct usb_serial_driver oti6858_device = {
 	.write_bulk_callback =	oti6858_write_bulk_callback,
 	.write_room =		oti6858_write_room,
 	.chars_in_buffer =	oti6858_chars_in_buffer,
+	.attach =		oti6858_attach,
 	.port_probe =		oti6858_port_probe,
 	.port_remove =		oti6858_port_remove,
 };
@@ -324,6 +326,20 @@ static void send_data(struct work_struct *work)
 	usb_serial_port_softint(port);
 }
 
+static int oti6858_attach(struct usb_serial *serial)
+{
+	unsigned char num_ports = serial->num_ports;
+
+	if (serial->num_bulk_in < num_ports ||
+			serial->num_bulk_out < num_ports ||
+			serial->num_interrupt_in < num_ports) {
+		dev_err(&serial->interface->dev, "missing endpoints\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
 static int oti6858_port_probe(struct usb_serial_port *port)
 {
 	struct oti6858_private *priv;
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index ae682e4eeaef..46fca6b75846 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -220,9 +220,17 @@ static int pl2303_probe(struct usb_serial *serial,
 static int pl2303_startup(struct usb_serial *serial)
 {
 	struct pl2303_serial_private *spriv;
+	unsigned char num_ports = serial->num_ports;
 	enum pl2303_type type = TYPE_01;
 	unsigned char *buf;
 
+	if (serial->num_bulk_in < num_ports ||
+			serial->num_bulk_out < num_ports ||
+			serial->num_interrupt_in < num_ports) {
+		dev_err(&serial->interface->dev, "missing endpoints\n");
+		return -ENODEV;
+	}
+
 	spriv = kzalloc(sizeof(*spriv), GFP_KERNEL);
 	if (!spriv)
 		return -ENOMEM;
diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c
index 659cb8606bd9..5709cc93b083 100644
--- a/drivers/usb/serial/quatech2.c
+++ b/drivers/usb/serial/quatech2.c
@@ -408,16 +408,12 @@ static void qt2_close(struct usb_serial_port *port)
 {
 	struct usb_serial *serial;
 	struct qt2_port_private *port_priv;
-	unsigned long flags;
 	int i;
 
 	serial = port->serial;
 	port_priv = usb_get_serial_port_data(port);
 
-	spin_lock_irqsave(&port_priv->urb_lock, flags);
 	usb_kill_urb(port_priv->write_urb);
-	port_priv->urb_in_use = false;
-	spin_unlock_irqrestore(&port_priv->urb_lock, flags);
 
 	/* flush the port transmit buffer */
 	i = usb_control_msg(serial->dev,
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index ef0dbf0703c5..475e6c31b266 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -154,6 +154,19 @@ static int spcp8x5_probe(struct usb_serial *serial,
 	return 0;
 }
 
+static int spcp8x5_attach(struct usb_serial *serial)
+{
+	unsigned char num_ports = serial->num_ports;
+
+	if (serial->num_bulk_in < num_ports ||
+			serial->num_bulk_out < num_ports) {
+		dev_err(&serial->interface->dev, "missing endpoints\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
 static int spcp8x5_port_probe(struct usb_serial_port *port)
 {
 	const struct usb_device_id *id = usb_get_serial_data(port->serial);
@@ -477,6 +490,7 @@ static struct usb_serial_driver spcp8x5_device = {
 	.tiocmget		= spcp8x5_tiocmget,
 	.tiocmset		= spcp8x5_tiocmset,
 	.probe			= spcp8x5_probe,
+	.attach			= spcp8x5_attach,
 	.port_probe		= spcp8x5_port_probe,
 	.port_remove		= spcp8x5_port_remove,
 };
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 8db9d071d940..64b85b8dedf3 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -579,6 +579,13 @@ static int ti_startup(struct usb_serial *serial)
 		goto free_tdev;
 	}
 
+	if (serial->num_bulk_in < serial->num_ports ||
+			serial->num_bulk_out < serial->num_ports) {
+		dev_err(&serial->interface->dev, "missing endpoints\n");
+		status = -ENODEV;
+		goto free_tdev;
+	}
+
 	return 0;
 
 free_tdev: