diff options
| author | Mathias Nyman <mathias.nyman@linux.intel.com> | 2015-10-01 18:40:38 +0300 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2015-10-04 10:34:17 +0100 |
| commit | b50107bb83d027dfd36bb7efb90570559757d6ae (patch) | |
| tree | bfdf003f25884dd1e25fea40f80fdb2eb66808be /drivers/usb/host/xhci.c | |
| parent | 7117522520b9101af7a0602d6b0d1e67d689fc6b (diff) | |
xhci: check xhci hardware for USB 3.1 support
Set the controller speed to HCD_USB31 to if host hardware supports USB 3.1
For PCI xhci controllers the USB 3.1 support is checked from SBRN bits in
pci config space. Platform controllers will need to set xhci->sbrn == 0x31
to indicate USB 3.1 support before calling xhci_gen_setup().
Also make sure xhci driver works correctly with speed set to HCD_USB31
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/usb/host/xhci.c')
| -rw-r--r-- | drivers/usb/host/xhci.c | 13 |
1 files changed, 9 insertions, 4 deletions
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 0ba6c1cc90b4..49a41c7890c8 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -3973,7 +3973,7 @@ int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1) __le32 __iomem *addr; int raw_port; - if (hcd->speed != HCD_USB3) + if (hcd->speed < HCD_USB3) addr = xhci->usb2_ports[port1 - 1]; else addr = xhci->usb3_ports[port1 - 1]; @@ -4124,7 +4124,7 @@ int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd, int hird, exit_latency; int ret; - if (hcd->speed == HCD_USB3 || !xhci->hw_lpm_support || + if (hcd->speed >= HCD_USB3 || !xhci->hw_lpm_support || !udev->lpm_capable) return -EPERM; @@ -4241,7 +4241,7 @@ int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev) struct xhci_hcd *xhci = hcd_to_xhci(hcd); int portnum = udev->portnum - 1; - if (hcd->speed == HCD_USB3 || !xhci->sw_lpm_support || + if (hcd->speed >= HCD_USB3 || !xhci->sw_lpm_support || !udev->lpm_capable) return 0; @@ -4841,8 +4841,9 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) /* XHCI controllers don't stop the ep queue on short packets :| */ hcd->self.no_stop_on_short = 1; + xhci = hcd_to_xhci(hcd); + if (usb_hcd_is_primary_hcd(hcd)) { - xhci = hcd_to_xhci(hcd); xhci->main_hcd = hcd; /* Mark the first roothub as being USB 2.0. * The xHCI driver will register the USB 3.0 roothub. @@ -4856,6 +4857,10 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) */ hcd->has_tt = 1; } else { + if (xhci->sbrn == 0x31) { + xhci_info(xhci, "Host supports USB 3.1 Enhanced SuperSpeed\n"); + hcd->speed = HCD_USB31; + } /* xHCI private pointer was set in xhci_pci_probe for the second * registered roothub. */ |