Staging: rtl8187se: remove ENABLE_DOT11D ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 files changed, 0 insertions, 133 deletions

diff --git a/drivers/staging/rtl8187se/Makefile b/drivers/staging/rtl8187se/Makefile
index 6bc7e29771c3..578459898733 100644
--- a/drivers/staging/rtl8187se/Makefile
+++ b/drivers/staging/rtl8187se/Makefile
@@ -17,9 +17,6 @@ EXTRA_CFLAGS += -DSW_DIG
 EXTRA_CFLAGS += -DRATE_ADAPT
 EXTRA_CFLAGS += -DCONFIG_RTL8180_PM
 
-#+YJ,080626
-EXTRA_CFLAGS += -DENABLE_DOT11D
-
 #enable it for legacy power save, disable it for leisure  power save
 EXTRA_CFLAGS += -DENABLE_LPS
 
diff --git a/drivers/staging/rtl8187se/ieee80211/dot11d.c b/drivers/staging/rtl8187se/ieee80211/dot11d.c
index 9314632e9401..d8798698c804 100644
--- a/drivers/staging/rtl8187se/ieee80211/dot11d.c
+++ b/drivers/staging/rtl8187se/ieee80211/dot11d.c
@@ -1,4 +1,3 @@
-#ifdef ENABLE_DOT11D
 //-----------------------------------------------------------------------------
 //	File:
 //		Dot11d.c
@@ -233,4 +232,3 @@ EXPORT_SYMBOL(DOT11D_ScanComplete);
 EXPORT_SYMBOL(IsLegalChannel);
 EXPORT_SYMBOL(ToLegalChannel);
 #endif
-#endif
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211.h b/drivers/staging/rtl8187se/ieee80211/ieee80211.h
index fcc65a924055..61e667afbdd5 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211.h
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211.h
@@ -694,7 +694,6 @@ struct ieee80211_header_data {
 #define MFIE_TYPE_RATES_EX   50
 #define MFIE_TYPE_GENERIC    221
 
-#ifdef ENABLE_DOT11D
 typedef enum
 {
 	COUNTRY_CODE_FCC = 0,
@@ -709,7 +708,6 @@ typedef enum
 	COUNTRY_CODE_GLOBAL_DOMAIN = 9,
 	COUNTRY_CODE_WORLD_WIDE_13_INDEX = 10
 }country_code_type_t;
-#endif
 
 struct ieee80211_info_element_hdr {
 	u8 id;
@@ -961,10 +959,8 @@ struct ieee80211_network {
 #ifdef THOMAS_TURBO
 	u8 Turbo_Enable;//enable turbo mode, added by thomas
 #endif
-#ifdef ENABLE_DOT11D
 	u16 CountryIeLen;
 	u8 CountryIeBuf[MAX_IE_LEN];
-#endif
 };
 
 enum ieee80211_state {
@@ -1105,18 +1101,12 @@ struct ieee80211_device {
 	 */
 	short sync_scan_hurryup;
 
-#ifdef ENABLE_DOT11D
 	void * pDot11dInfo;
 	bool bGlobalDomain;
 
 	// For Liteon Ch12~13 passive scan
 	u8	MinPassiveChnlNum;
 	u8	IbssStartChnl;
-#else
-	/* map of allowed channels. 0 is dummy */
-	// FIXME: remeber to default to a basic channel plan depending of the PHY type
-	int channel_map[MAX_CHANNEL_NUMBER+1];
-#endif
 
 	int rate;       /* current rate */
 	int basic_rate;
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c
index 9226052c40d9..5b972b69ab72 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c
@@ -44,9 +44,7 @@
 #include <linux/ctype.h>
 
 #include "ieee80211.h"
-#ifdef ENABLE_DOT11D
 #include "dot11d.h"
-#endif
 static inline void ieee80211_monitor_rx(struct ieee80211_device *ieee,
 					struct sk_buff *skb,
 					struct ieee80211_rx_stats *rx_stats)
@@ -1072,7 +1070,6 @@ static inline int ieee80211_SignalStrengthTranslate(
 	return RetSS;
 }
 
-#ifdef ENABLE_DOT11D
 static inline void ieee80211_extract_country_ie(
 	struct ieee80211_device *ieee,
 	struct ieee80211_info_element *info_element,
@@ -1114,7 +1111,6 @@ static inline void ieee80211_extract_country_ie(
 	}
 
 }
-#endif
 
 int
 ieee80211_TranslateToDbm(
@@ -1166,10 +1162,8 @@ inline int ieee80211_network_init(
 #ifdef THOMAS_TURBO
 	network->Turbo_Enable = 0;
 #endif
-#ifdef ENABLE_DOT11D
 	network->CountryIeLen = 0;
 	memset(network->CountryIeBuf, 0, MAX_IE_LEN);
-#endif
 
 	if (stats->freq == IEEE80211_52GHZ_BAND) {
 		/* for A band (No DS info) */
@@ -1394,14 +1388,12 @@ inline int ieee80211_network_init(
 			memcpy(network->rsn_ie, info_element,
 			       network->rsn_ie_len);
 			break;
-#ifdef ENABLE_DOT11D
 		case MFIE_TYPE_COUNTRY:
 			IEEE80211_DEBUG_SCAN("MFIE_TYPE_COUNTRY: %d bytes\n",
 					     info_element->len);
 //			printk("=====>Receive <%s> Country IE\n",network->ssid);
 			ieee80211_extract_country_ie(ieee, info_element, network, beacon->header.addr2);
 			break;
-#endif
 		default:
 			IEEE80211_DEBUG_SCAN("unsupported IE %d\n",
 					     info_element->id);
@@ -1552,10 +1544,8 @@ inline void update_network(struct ieee80211_network *dst,
 #ifdef THOMAS_TURBO
 	dst->Turbo_Enable = src->Turbo_Enable;
 #endif
-#ifdef ENABLE_DOT11D
 	dst->CountryIeLen = src->CountryIeLen;
 	memcpy(dst->CountryIeBuf, src->CountryIeBuf, src->CountryIeLen);
-#endif
 }
 
 
@@ -1623,7 +1613,6 @@ inline void ieee80211_process_probe_response(
 		return;
 	}
 
-#ifdef ENABLE_DOT11D
 	// For Asus EeePc request,
 	// (1) if wireless adapter receive get any 802.11d country code in AP beacon,
 	//	   wireless adapter should follow the country code.
@@ -1677,7 +1666,6 @@ inline void ieee80211_process_probe_response(
 			}
 		}
 	}
-#endif
 	/* The network parsed correctly -- so now we scan our known networks
 	 * to see if we can find it in our list.
 	 *
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
index 9fcc24601d79..56d8445cd343 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
@@ -21,9 +21,7 @@
 #include <linux/version.h>
 #include <asm/uaccess.h>
 
-#ifdef ENABLE_DOT11D
 #include "dot11d.h"
-#endif
 u8 rsn_authen_cipher_suite[16][4] = {
 	{0x00,0x0F,0xAC,0x00}, //Use group key, //Reserved
 	{0x00,0x0F,0xAC,0x01}, //WEP-40         //RSNA default
@@ -443,10 +441,8 @@ void ieee80211_send_probe_requests(struct ieee80211_device *ieee)
 void ieee80211_softmac_scan_syncro(struct ieee80211_device *ieee)
 {
 	short ch = 0;
-#ifdef ENABLE_DOT11D
 	u8 channel_map[MAX_CHANNEL_NUMBER+1];
 	memcpy(channel_map, GET_DOT11D_INFO(ieee)->channel_map, MAX_CHANNEL_NUMBER+1);
-#endif
 	down(&ieee->scan_sem);
 //	printk("==================> Sync scan\n");
 
@@ -458,11 +454,7 @@ void ieee80211_softmac_scan_syncro(struct ieee80211_device *ieee)
 			if (ch > MAX_CHANNEL_NUMBER)
 				goto out; /* scan completed */
 
-#ifdef ENABLE_DOT11D
 		}while(!channel_map[ch]);
-#else
-		}while(!ieee->channel_map[ch]);
-#endif
 		/* this fuction can be called in two situations
 		 * 1- We have switched to ad-hoc mode and we are
 		 *    performing a complete syncro scan before conclude
@@ -487,9 +479,7 @@ void ieee80211_softmac_scan_syncro(struct ieee80211_device *ieee)
 
 		ieee->set_chan(ieee->dev, ch);
 //		printk("=====>channel=%d   ",ch);
-#ifdef ENABLE_DOT11D
 		if(channel_map[ch] == 1)
-#endif
 		{
 //			printk("====send probe request\n");
 			ieee80211_send_probe_requests(ieee);
@@ -507,20 +497,16 @@ void ieee80211_softmac_scan_syncro(struct ieee80211_device *ieee)
 out:
 	ieee->sync_scan_hurryup = 0;
 	up(&ieee->scan_sem);
-#ifdef ENABLE_DOT11D
 	if(IS_DOT11D_ENABLE(ieee))
 		DOT11D_ScanComplete(ieee);
-#endif
 }
 
 void ieee80211_softmac_ips_scan_syncro(struct ieee80211_device *ieee)
 {
 	int ch;
         unsigned int watch_dog = 0;
-#ifdef ENABLE_DOT11D
 	u8 channel_map[MAX_CHANNEL_NUMBER+1];
 	memcpy(channel_map, GET_DOT11D_INFO(ieee)->channel_map, MAX_CHANNEL_NUMBER+1);
-#endif
         down(&ieee->scan_sem);
 	ch = ieee->current_network.channel;
 //      	if(ieee->sync_scan_hurryup)
@@ -554,16 +540,12 @@ void ieee80211_softmac_ips_scan_syncro(struct ieee80211_device *ieee)
 		{
 			goto out;
 		}
-#ifdef ENABLE_DOT11D
 		if(channel_map[ieee->current_network.channel] > 0)
-#endif
 		{
 			ieee->set_chan(ieee->dev, ieee->current_network.channel);
 //			printk("======>channel=%d  ",ieee->current_network.channel);
 		}
-#ifdef ENABLE_DOT11D
 		if(channel_map[ieee->current_network.channel] == 1)
-#endif
 		{
 //			printk("====send probe request\n");
 			ieee80211_send_probe_requests(ieee);
@@ -582,11 +564,7 @@ void ieee80211_softmac_ips_scan_syncro(struct ieee80211_device *ieee)
 				goto out; /* scan completed */
 
 			ieee->current_network.channel = (ieee->current_network.channel + 1)%MAX_CHANNEL_NUMBER;
-#ifdef ENABLE_DOT11D
 		}while(!channel_map[ieee->current_network.channel]);
-#else
-		}while(!ieee->channel_map[ieee->current_network.channel]);
-#endif
         }
 out:
 	//ieee->sync_scan_hurryup = 0;
@@ -594,10 +572,8 @@ out:
    	//ieee->current_network.channel = ch;
 	ieee->actscanning = false;
 	up(&ieee->scan_sem);
-#ifdef ENABLE_DOT11D
 	if(IS_DOT11D_ENABLE(ieee))
 		DOT11D_ScanComplete(ieee);
-#endif
 }
 
 
@@ -625,10 +601,8 @@ void ieee80211_softmac_scan_wq(struct work_struct *work)
 	struct delayed_work *dwork = to_delayed_work(work);
 	struct ieee80211_device *ieee = container_of(dwork, struct ieee80211_device, softmac_scan_wq);
 	static short watchdog = 0;
-#ifdef ENABLE_DOT11D
 	u8 channel_map[MAX_CHANNEL_NUMBER+1];
 	memcpy(channel_map, GET_DOT11D_INFO(ieee)->channel_map, MAX_CHANNEL_NUMBER+1);
-#endif
 //	printk("ieee80211_softmac_scan_wq ENABLE_IPS\n");
 //	printk("in %s\n",__func__);
 	down(&ieee->scan_sem);
@@ -639,11 +613,7 @@ void ieee80211_softmac_scan_wq(struct work_struct *work)
 		if (watchdog++ > MAX_CHANNEL_NUMBER)
 				goto out; /* no good chans */
 
-#ifdef ENABLE_DOT11D
  	}while(!channel_map[ieee->current_network.channel]);
-#else
- 	}while(!ieee->channel_map[ieee->current_network.channel]);
-#endif
 
 	//printk("current_network.channel:%d\n", ieee->current_network.channel);
 	if (ieee->scanning == 0 )
@@ -652,9 +622,7 @@ void ieee80211_softmac_scan_wq(struct work_struct *work)
 		goto out;
 	}
 	ieee->set_chan(ieee->dev, ieee->current_network.channel);
-#ifdef ENABLE_DOT11D
 	if(channel_map[ieee->current_network.channel] == 1)
-#endif
 		ieee80211_send_probe_requests(ieee);
 
 	queue_delayed_work(ieee->wq, &ieee->softmac_scan_wq, IEEE80211_SOFTMAC_SCAN_TIME);
@@ -666,10 +634,8 @@ out:
 	ieee->scanning = 0;
 	up(&ieee->scan_sem);
 
-#ifdef ENABLE_DOT11D
 	if(IS_DOT11D_ENABLE(ieee))
 		DOT11D_ScanComplete(ieee);
-#endif
 	return;
 }
 #else
@@ -678,10 +644,8 @@ void ieee80211_softmac_scan_wq(struct work_struct *work)
 	struct delayed_work *dwork = to_delayed_work(work);
         struct ieee80211_device *ieee = container_of(work, struct ieee80211_device, softmac_scan_wq);
         short watchdog = 0;
-#ifdef ENABLE_DOT11D
 	u8 channel_map[MAX_CHANNEL_NUMBER+1];
 	memcpy(channel_map, GET_DOT11D_INFO(ieee)->channel_map, MAX_CHANNEL_NUMBER+1);
-#endif
 //      printk("enter scan wq,watchdog is %d\n",watchdog);
         down(&ieee->scan_sem);
 
@@ -691,11 +655,7 @@ void ieee80211_softmac_scan_wq(struct work_struct *work)
                 if (watchdog++ > MAX_CHANNEL_NUMBER)
                                 goto out; /* no good chans */
 
-#ifdef ENABLE_DOT11D
         }while(!channel_map[ieee->current_network.channel]);
-#else
-        }while(!ieee->channel_map[ieee->current_network.channel]);
-#endif
 
 //      printk("current_network.channel:%d\n", ieee->current_network.channel);
         if (ieee->scanning == 0 )
@@ -704,18 +664,14 @@ void ieee80211_softmac_scan_wq(struct work_struct *work)
                 goto out;
         }
         ieee->set_chan(ieee->dev, ieee->current_network.channel);
-#ifdef ENABLE_DOT11D
 	if(channel_map[ieee->current_network.channel] == 1)
-#endif
 		ieee80211_send_probe_requests(ieee);
 
 	queue_delayed_work(ieee->wq, &ieee->softmac_scan_wq, IEEE80211_SOFTMAC_SCAN_TIME);
 out:
 	up(&ieee->scan_sem);
-#ifdef ENABLE_DOT11D
 	if(IS_DOT11D_ENABLE(ieee))
 		DOT11D_ScanComplete(ieee);
-#endif
 }
 
 #endif
@@ -794,7 +750,6 @@ void ieee80211_stop_scan(struct ieee80211_device *ieee)
 /* called with ieee->lock held */
 void ieee80211_start_scan(struct ieee80211_device *ieee)
 {
-#ifdef ENABLE_DOT11D
 	if(IS_DOT11D_ENABLE(ieee) )
 	{
 		if(IS_COUNTRY_IE_VALID(ieee))
@@ -802,7 +757,6 @@ void ieee80211_start_scan(struct ieee80211_device *ieee)
 			RESET_CIE_WATCHDOG(ieee);
 		}
 	}
-#endif
 	if (ieee->softmac_features & IEEE_SOFTMAC_SCAN){
 		if (ieee->scanning == 0)
 		{
@@ -822,7 +776,6 @@ void ieee80211_start_scan(struct ieee80211_device *ieee)
 /* called with wx_sem held */
 void ieee80211_start_scan_syncro(struct ieee80211_device *ieee)
 {
-#ifdef ENABLE_DOT11D
 	if(IS_DOT11D_ENABLE(ieee) )
 	{
 		if(IS_COUNTRY_IE_VALID(ieee))
@@ -830,7 +783,6 @@ void ieee80211_start_scan_syncro(struct ieee80211_device *ieee)
 			RESET_CIE_WATCHDOG(ieee);
 		}
 	}
-#endif
 	ieee->sync_scan_hurryup = 0;
 
 	if (ieee->softmac_features & IEEE_SOFTMAC_SCAN)
@@ -2534,10 +2486,8 @@ void ieee80211_start_ibss_wq(struct work_struct *work)
 	/* check if we have this cell in our network list */
 	ieee80211_softmac_check_all_nets(ieee);
 
-#ifdef ENABLE_DOT11D
 	if(ieee->state == IEEE80211_NOLINK)
 		ieee->current_network.channel = 10;
-#endif
 	/* if not then the state is not linked. Maybe the user swithced to
 	 * ad-hoc mode just after being in monitor mode, or just after
 	 * being very few time in managed mode (so the card have had no
@@ -2626,7 +2576,6 @@ inline void ieee80211_start_ibss(struct ieee80211_device *ieee)
 void ieee80211_start_bss(struct ieee80211_device *ieee)
 {
 	unsigned long flags;
-#ifdef ENABLE_DOT11D
 	//
 	// Ref: 802.11d 11.1.3.3
 	// STA shall not start a BSS unless properly formed Beacon frame including a Country IE.
@@ -2638,7 +2587,6 @@ void ieee80211_start_bss(struct ieee80211_device *ieee)
 			return;
 		}
 	}
-#endif
 	/* check if we have already found the net we
 	 * are interested in (if any).
 	 * if not (we are disassociated and we are not
@@ -2677,10 +2625,8 @@ void ieee80211_disassociate(struct ieee80211_device *ieee)
 	if (ieee->data_hard_stop)
 			ieee->data_hard_stop(ieee->dev);
 
-#ifdef ENABLE_DOT11D
 	if(IS_DOT11D_ENABLE(ieee))
 		Dot11d_Reset(ieee);
-#endif
 	ieee->state = IEEE80211_NOLINK;
 	ieee->link_change(ieee->dev);
 	notify_wx_assoc_event(ieee);
@@ -2822,11 +2768,7 @@ void ieee80211_start_protocol(struct ieee80211_device *ieee)
 			if (ch > MAX_CHANNEL_NUMBER)
 				return; /* no channel found */
 
-#ifdef ENABLE_DOT11D
 		}while(!GET_DOT11D_INFO(ieee)->channel_map[ch]);
-#else
-		}while(!ieee->channel_map[ch]);
-#endif
 
 		ieee->current_network.channel = ch;
 	}
@@ -2954,9 +2896,7 @@ void ieee80211_softmac_init(struct ieee80211_device *ieee)
 	tasklet_init(&ieee->ps_task,
 	     (void(*)(unsigned long)) ieee80211_sta_ps,
 	     (unsigned long)ieee);
-#ifdef ENABLE_DOT11D
 	ieee->pDot11dInfo = kmalloc(sizeof(RT_DOT11D_INFO), GFP_ATOMIC);
-#endif
 }
 
 void ieee80211_softmac_free(struct ieee80211_device *ieee)
@@ -2971,10 +2911,8 @@ void ieee80211_softmac_free(struct ieee80211_device *ieee)
 	cancel_delayed_work(&ieee->GPIOChangeRFWorkItem);
 
 	destroy_workqueue(ieee->wq);
-#ifdef ENABLE_DOT11D
 	if(NULL != ieee->pDot11dInfo)
 		kfree(ieee->pDot11dInfo);
-#endif
 	up(&ieee->wx_sem);
 }
 
diff --git a/drivers/staging/rtl8187se/r8180_core.c b/drivers/staging/rtl8187se/r8180_core.c
index bed67c8c6905..225561c84f1c 100644
--- a/drivers/staging/rtl8187se/r8180_core.c
+++ b/drivers/staging/rtl8187se/r8180_core.c
@@ -78,9 +78,7 @@ double __extendsfdf2(float a) {return a;}
 #include "r8180_pm.h"
 #endif
 
-#ifdef ENABLE_DOT11D
 #include "ieee80211/dot11d.h"
-#endif
 
 #ifdef CONFIG_RTL8185B
 //#define CONFIG_RTL8180_IO_MAP
@@ -3899,7 +3897,6 @@ void watch_dog_adaptive(unsigned long data)
 //        DMESG("<----watch_dog_adaptive()\n");
 }
 
-#ifdef ENABLE_DOT11D
 
 static CHANNEL_LIST ChannelPlan[] = {
 	{{1,2,3,4,5,6,7,8,9,10,11,36,40,44,48,52,56,60,64},19},  		//FCC
@@ -3975,7 +3972,6 @@ static void rtl8180_set_channel_map(u8 channel_plan, struct ieee80211_device *ie
 		}
 	}
 }
-#endif
 
 //Add for RF power on power off by lizhaoming 080512
 void GPIOChangeRFWorkItemCallBack(struct work_struct *work);
@@ -4003,7 +3999,6 @@ short rtl8180_init(struct net_device *dev)
 	u16 tmpu16;
 	int i, j;
 
-#ifdef ENABLE_DOT11D
 #if 0
 	for(i=0;i<0xFF;i++) {
 		if(i%16 == 0)
@@ -4020,21 +4015,6 @@ short rtl8180_init(struct net_device *dev)
 
 	DMESG("Channel plan is %d\n",priv->channel_plan);
 	rtl8180_set_channel_map(priv->channel_plan, priv->ieee80211);
-#else
-	int ch;
-	//Set Default Channel Plan
-	if(!channels){
-		DMESG("No channels, aborting");
-		return -1;
-	}
-	ch=channels;
-	priv->channel_plan = 0;//hikaru
-	 // set channels 1..14 allowed in given locale
-	for (i=1; i<=14; i++) {
-		(priv->ieee80211->channel_map)[i] = (u8)(ch & 0x01);
-		ch >>= 1;
-	}
-#endif
 
 	//memcpy(priv->stats,0,sizeof(struct Stats));
 
diff --git a/drivers/staging/rtl8187se/r8180_rtl8225z2.c b/drivers/staging/rtl8187se/r8180_rtl8225z2.c
index 01cc746f96c4..514ebdf32dd2 100644
--- a/drivers/staging/rtl8187se/r8180_rtl8225z2.c
+++ b/drivers/staging/rtl8187se/r8180_rtl8225z2.c
@@ -14,9 +14,7 @@
 #include "r8180_rtl8225.h"
 #include "r8180_93cx6.h"
 
-#ifdef ENABLE_DOT11D
 #include "ieee80211/dot11d.h"
-#endif
 
 #ifdef CONFIG_RTL8185B
 
@@ -431,7 +429,6 @@ void rtl8225z2_rf_close(struct net_device *dev)
 	rtl8185_set_anaparam2(dev, RTL8225z2_ANAPARAM2_OFF);
 }
 
-#ifdef ENABLE_DOT11D
 //
 //	Description:
 //		Map dBm into Tx power index according to
@@ -502,7 +499,6 @@ DbmToTxPwrIdx(
 
 	return TxPwrIdx;
 }
-#endif
 
 void rtl8225z2_SetTXPowerLevel(struct net_device *dev, short ch)
 {
@@ -554,7 +550,6 @@ void rtl8225z2_SetTXPowerLevel(struct net_device *dev, short ch)
 			CckTxPwrIdx, OfdmTxPwrIdx);
 	}
 #endif
-#ifdef ENABLE_DOT11D
 	if(IS_DOT11D_ENABLE(priv->ieee80211) &&
 		IS_DOT11D_STATE_DONE(priv->ieee80211) )
 	{
@@ -576,7 +571,6 @@ void rtl8225z2_SetTXPowerLevel(struct net_device *dev, short ch)
 
 	//priv->CurrentCckTxPwrIdx = cck_power_level;
 	//priv->CurrentOfdmTxPwrIdx = ofdm_power_level;
-#endif
 
 	max_cck_power_level = 15;
 	max_ofdm_power_level = 25; //  12 -> 25
diff --git a/drivers/staging/rtl8187se/r8180_wx.c b/drivers/staging/rtl8187se/r8180_wx.c
index 7149e55442c2..939a5bf4bf11 100644
--- a/drivers/staging/rtl8187se/r8180_wx.c
+++ b/drivers/staging/rtl8187se/r8180_wx.c
@@ -22,9 +22,7 @@
 #include "r8180_hw.h"
 #include "r8180_sa2400.h"
 
-#ifdef ENABLE_DOT11D
 #include "ieee80211/dot11d.h"
-#endif
 
 //#define RATE_COUNT 4
 u32 rtl8180_rates[] = {1000000,2000000,5500000,11000000,
@@ -313,11 +311,7 @@ static int rtl8180_wx_get_range(struct net_device *dev,
 	for (i = 0, val = 0; i < 14; i++) {
 
 		// Include only legal frequencies for some countries
-#ifdef ENABLE_DOT11D
 		if ((GET_DOT11D_INFO(priv->ieee80211)->channel_map)[i+1]) {
-#else
-		if ((priv->ieee80211->channel_map)[i+1]) {
-#endif
 		        range->freq[val].i = i + 1;
 			range->freq[val].m = ieee80211_wlan_frequencies[i] * 100000;
 			range->freq[val].e = 1;
@@ -1189,20 +1183,12 @@ static int r8180_wx_set_channelplan(struct net_device *dev,
 		// Clear old channel map
 		for (i=1;i<=MAX_CHANNEL_NUMBER;i++)
 		{
-#ifdef ENABLE_DOT11D
 			GET_DOT11D_INFO(priv->ieee80211)->channel_map[i] = 0;
-#else
-			priv->ieee80211->channel_map[i] = 0;
-#endif
 		}
 		// Set new channel map
 		for (i=1;i<=DefaultChannelPlan[*val].Len;i++)
 		{
-#ifdef ENABLE_DOT11D
 			GET_DOT11D_INFO(priv->ieee80211)->channel_map[DefaultChannelPlan[*val].Channel[i-1]] = 1;
-#else
-			priv->ieee80211->channel_map[DefaultChannelPlan[*val].Channel[i-1]] = 1;
-#endif
 		}
 	}
 	up(&priv->wx_sem);
diff --git a/drivers/staging/rtl8187se/r8185b_init.c b/drivers/staging/rtl8187se/r8185b_init.c
index 88fd1152769b..7ac187e3ac7c 100644
--- a/drivers/staging/rtl8187se/r8185b_init.c
+++ b/drivers/staging/rtl8187se/r8185b_init.c
@@ -34,9 +34,7 @@ Notes:
 #include "r8180_pm.h"
 #endif
 
-#ifdef ENABLE_DOT11D
 #include "ieee80211/dot11d.h"
-#endif
 
 #ifdef CONFIG_RTL8185B
 
@@ -2576,10 +2574,8 @@ MgntDisconnect(
 
 	// Indication of disassociation event.
 	//DrvIFIndicateDisassociation(Adapter, asRsn);
-#ifdef ENABLE_DOT11D
 	if(IS_DOT11D_ENABLE(priv->ieee80211))
 		Dot11d_Reset(priv->ieee80211);
-#endif
 	// In adhoc mode, update beacon frame.
 	if( priv->ieee80211->state == IEEE80211_LINKED )
 	{