Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (68 commits)
  net: can: janz-ican3: world-writable sysfs termination file
  net: can: at91_can: world-writable sysfs files
  MAINTAINERS: update email ids of the be2net driver maintainers.
  bridge: Don't put partly initialized fdb into hash
  r8169: prevent RxFIFO induced loops in the irq handler.
  r8169: RxFIFO overflow oddities with 8168 chipsets.
  r8169: use RxFIFO overflow workaround for 8168c chipset.
  include/net/genetlink.h: Allow genlmsg_cancel to accept a NULL argument
  net: Provide compat support for SIOCGETMIFCNT_IN6 and SIOCGETSGCNT_IN6.
  net: Support compat SIOCGETVIFCNT ioctl in ipv4.
  net: Fix bug in compat SIOCGETSGCNT handling.
  niu: Fix races between up/down and get_stats.
  tcp_ecn is an integer not a boolean
  atl1c: Add missing PCI device ID
  s390: Fix possibly wrong size in strncmp (smsgiucv)
  s390: Fix wrong size in memcmp (netiucv)
  qeth: allow OSA CHPARM change in suspend state
  qeth: allow HiperSockets framesize change in suspend
  qeth: add more strict MTU checking
  qeth: show new mac-address if its setting fails
  ...

1 files changed, 18 insertions, 47 deletions

diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index 7160ec51093e..dd1210fddfff 100644
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c
@@ -3948,48 +3948,6 @@ static u8 bnx2x_8073_8727_external_rom_boot(struct bnx2x *bp,
 	return rc;
 }
 
-static void bnx2x_8073_set_xaui_low_power_mode(struct bnx2x *bp,
-					       struct bnx2x_phy *phy)
-{
-	u16 val;
-	bnx2x_cl45_read(bp, phy,
-			MDIO_PMA_DEVAD, MDIO_PMA_REG_8073_CHIP_REV, &val);
-
-	if (val == 0) {
-		/* Mustn't set low power mode in 8073 A0 */
-		return;
-	}
-
-	/* Disable PLL sequencer (use read-modify-write to clear bit 13) */
-	bnx2x_cl45_read(bp, phy,
-			MDIO_XS_DEVAD, MDIO_XS_PLL_SEQUENCER, &val);
-	val &= ~(1<<13);
-	bnx2x_cl45_write(bp, phy,
-		       MDIO_XS_DEVAD, MDIO_XS_PLL_SEQUENCER, val);
-
-	/* PLL controls */
-	bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x805E, 0x1077);
-	bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x805D, 0x0000);
-	bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x805C, 0x030B);
-	bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x805B, 0x1240);
-	bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x805A, 0x2490);
-
-	/* Tx Controls */
-	bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x80A7, 0x0C74);
-	bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x80A6, 0x9041);
-	bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x80A5, 0x4640);
-
-	/* Rx Controls */
-	bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x80FE, 0x01C4);
-	bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x80FD, 0x9249);
-	bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, 0x80FC, 0x2015);
-
-	/* Enable PLL sequencer  (use read-modify-write to set bit 13) */
-	bnx2x_cl45_read(bp, phy, MDIO_XS_DEVAD, MDIO_XS_PLL_SEQUENCER, &val);
-	val |= (1<<13);
-	bnx2x_cl45_write(bp, phy, MDIO_XS_DEVAD, MDIO_XS_PLL_SEQUENCER, val);
-}
-
 /******************************************************************/
 /*			BCM8073 PHY SECTION			  */
 /******************************************************************/
@@ -4148,8 +4106,6 @@ static u8 bnx2x_8073_config_init(struct bnx2x_phy *phy,
 
 	bnx2x_8073_set_pause_cl37(params, phy, vars);
 
-	bnx2x_8073_set_xaui_low_power_mode(bp, phy);
-
 	bnx2x_cl45_read(bp, phy,
 			MDIO_PMA_DEVAD, MDIO_PMA_REG_M8051_MSGOUT_REG, &tmp1);
 
@@ -6519,6 +6475,18 @@ static void bnx2x_848xx_set_link_led(struct bnx2x_phy *phy,
 					 MDIO_PMA_DEVAD,
 					 MDIO_PMA_REG_8481_LED1_MASK,
 					 0x80);
+
+			/* Tell LED3 to blink on source */
+			bnx2x_cl45_read(bp, phy,
+					MDIO_PMA_DEVAD,
+					MDIO_PMA_REG_8481_LINK_SIGNAL,
+					&val);
+			val &= ~(7<<6);
+			val |= (1<<6); /* A83B[8:6]= 1 */
+			bnx2x_cl45_write(bp, phy,
+					 MDIO_PMA_DEVAD,
+					 MDIO_PMA_REG_8481_LINK_SIGNAL,
+					 val);
 		}
 		break;
 	}
@@ -7720,10 +7688,13 @@ static u8 bnx2x_8073_common_init_phy(struct bnx2x *bp,
 	struct bnx2x_phy phy[PORT_MAX];
 	struct bnx2x_phy *phy_blk[PORT_MAX];
 	u16 val;
-	s8 port;
+	s8 port = 0;
 	s8 port_of_path = 0;
-
-	bnx2x_ext_phy_hw_reset(bp, 0);
+	u32 swap_val, swap_override;
+	swap_val = REG_RD(bp,  NIG_REG_PORT_SWAP);
+	swap_override = REG_RD(bp,  NIG_REG_STRAP_OVERRIDE);
+	port ^= (swap_val && swap_override);
+	bnx2x_ext_phy_hw_reset(bp, port);
 	/* PART1 - Reset both phys */
 	for (port = PORT_MAX - 1; port >= PORT_0; port--) {
 		u32 shmem_base, shmem2_base;