Merge tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc: soc specific changes (part 2) from Olof Johansson:
 "This adds support for the spear13xx platform, which has first been
  under review a long time ago and finally been completed after generic
  spear work has gone into the clock, dt and pinctrl branches.

  Also a number of updates for the samsung socs are part of this branch."

Fix up trivial conflicts in drivers/gpio/gpio-samsung.c that look much
worse than they are: the exonys5 init code was refactored in commit
fd454997d687 ("gpio: samsung: refactor gpiolib init for exynos4/5"), and
then commit f10590c9836c ("ARM: EXYNOS: add GPC4 bank instance") added a
new gpio chip define and did tiny updates to the init code.

So the conflict diff looks like hell, but it's actually a fairly simple
change.

* tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (34 commits)
  ARM: exynos: fix building with CONFIG_OF disabled
  ARM: EXYNOS: Add AUXDATA for i2c controllers
  ARM: dts: Update device tree source files for EXYNOS5250
  ARM: EXYNOS: Add device tree support for interrupt combiner
  ARM: EXYNOS: Add irq_domain support for interrupt combiner
  ARM: EXYNOS: Remove a new bus_type instance for EXYNOS5
  ARM: EXYNOS: update irqs for EXYNOS5250 SoC
  ARM: EXYNOS: Add pre-divider and fout mux clocks for bpll and mpll
  ARM: EXYNOS: add GPC4 bank instance
  ARM: EXYNOS: Redefine IRQ_MCT_L0,1 definition
  ARM: EXYNOS: Modify the GIC physical address for static io-mapping
  ARM: EXYNOS: Add watchdog timer clock instance
  pinctrl: SPEAr1310: Fix pin numbers for clcd_high_res
  SPEAr: Update MAINTAINERS and Documentation
  SPEAr13xx: Add defconfig
  SPEAr13xx: Add compilation support
  SPEAr13xx: Add dts and dtsi files
  pinctrl: Add SPEAr13xx pinctrl drivers
  pinctrl: SPEAr: Create macro for declaring GPIO PINS
  SPEAr13xx: Add common clock framework support
  ...

9 files changed, 83 insertions, 9 deletions

diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index b34287ab5afd..e24961109b70 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -518,6 +518,11 @@ config S3C2443_DMA
 	help
 	  Internal config node for S3C2443 DMA support
 
+config S3C2443_SETUP_SPI
+	bool
+	help
+	  Common setup code for SPI GPIO configurations
+
 endif	# CPU_S3C2443 || CPU_S3C2416
 
 if CPU_S3C2443
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 270a0b6f4f22..0ab6ab15da4c 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -97,5 +97,6 @@ obj-$(CONFIG_MACH_OSIRIS_DVS)		+= mach-osiris-dvs.o
 # device setup
 
 obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
+obj-$(CONFIG_S3C2443_SETUP_SPI)		+= setup-spi.o
 obj-$(CONFIG_ARCH_S3C24XX)		+= setup-i2c.o
 obj-$(CONFIG_S3C24XX_SETUP_TS)		+= setup-ts.o
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2416.c b/arch/arm/mach-s3c24xx/clock-s3c2416.c
index dbc9ab4aaca2..8702ecfaab30 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2416.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2416.c
@@ -144,6 +144,7 @@ static struct clk_lookup s3c2416_clk_lookup[] = {
 	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &hsmmc0_clk),
 	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &hsmmc_mux0.clk),
 	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &hsmmc_mux1.clk),
+	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &hsspi_mux.clk),
 };
 
 void __init s3c2416_init_clocks(int xtal)
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2443.c b/arch/arm/mach-s3c24xx/clock-s3c2443.c
index efb3ac359566..a4c5a520d994 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2443.c
@@ -179,6 +179,11 @@ static struct clk *clks[] __initdata = {
 	&clk_hsmmc,
 };
 
+static struct clk_lookup s3c2443_clk_lookup[] = {
+	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_hsmmc),
+	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &clk_hsspi.clk),
+};
+
 void __init s3c2443_init_clocks(int xtal)
 {
 	unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
@@ -210,6 +215,7 @@ void __init s3c2443_init_clocks(int xtal)
 
 	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+	clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup));
 
 	s3c_pwmclk_init();
 }
diff --git a/arch/arm/mach-s3c24xx/common-s3c2443.c b/arch/arm/mach-s3c24xx/common-s3c2443.c
index 460431589f39..aeeb2be283fa 100644
--- a/arch/arm/mach-s3c24xx/common-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/common-s3c2443.c
@@ -424,11 +424,6 @@ static struct clk init_clocks_off[] = {
 		.enable		= s3c2443_clkcon_enable_p,
 		.ctrlbit	= S3C2443_PCLKCON_IIS,
 	}, {
-		.name		= "hsspi",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_HSSPI,
-	}, {
 		.name		= "adc",
 		.parent		= &clk_p,
 		.enable		= s3c2443_clkcon_enable_p,
@@ -562,6 +557,14 @@ static struct clk hsmmc1_clk = {
 	.ctrlbit	= S3C2443_HCLKCON_HSMMC,
 };
 
+static struct clk hsspi_clk = {
+	.name		= "spi",
+	.devname	= "s3c64xx-spi.0",
+	.parent		= &clk_p,
+	.enable		= s3c2443_clkcon_enable_p,
+	.ctrlbit	= S3C2443_PCLKCON_HSSPI,
+};
+
 /* EPLLCON compatible enough to get on/off information */
 
 void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll)
@@ -612,6 +615,7 @@ static struct clk *clks[] __initdata = {
 	&clk_usb_bus,
 	&clk_armdiv,
 	&hsmmc1_clk,
+	&hsspi_clk,
 };
 
 static struct clksrc_clk *clksrcs[] __initdata = {
@@ -629,6 +633,7 @@ static struct clk_lookup s3c2443_clk_lookup[] = {
 	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
 	CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_esys_uart.clk),
 	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &hsmmc1_clk),
+	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk0", &hsspi_clk),
 };
 
 void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
diff --git a/arch/arm/mach-s3c24xx/dma-s3c2443.c b/arch/arm/mach-s3c24xx/dma-s3c2443.c
index e227c472a40a..2d94228d2866 100644
--- a/arch/arm/mach-s3c24xx/dma-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/dma-s3c2443.c
@@ -55,12 +55,20 @@ static struct s3c24xx_dma_map __initdata s3c2443_dma_mappings[] = {
 		.name		= "sdi",
 		.channels	= MAP(S3C2443_DMAREQSEL_SDI),
 	},
-	[DMACH_SPI0] = {
-		.name		= "spi0",
+	[DMACH_SPI0_RX] = {
+		.name		= "spi0-rx",
+		.channels	= MAP(S3C2443_DMAREQSEL_SPI0RX),
+	},
+	[DMACH_SPI0_TX] = {
+		.name		= "spi0-tx",
 		.channels	= MAP(S3C2443_DMAREQSEL_SPI0TX),
 	},
-	[DMACH_SPI1] = { /* only on S3C2443/S3C2450 */
-		.name		= "spi1",
+	[DMACH_SPI1_RX] = { /* only on S3C2443/S3C2450 */
+		.name		= "spi1-rx",
+		.channels	= MAP(S3C2443_DMAREQSEL_SPI1RX),
+	},
+	[DMACH_SPI1_TX] = { /* only on S3C2443/S3C2450 */
+		.name		= "spi1-tx",
 		.channels	= MAP(S3C2443_DMAREQSEL_SPI1TX),
 	},
 	[DMACH_UART0] = {
diff --git a/arch/arm/mach-s3c24xx/include/mach/dma.h b/arch/arm/mach-s3c24xx/include/mach/dma.h
index acbdfecd4186..454831b66037 100644
--- a/arch/arm/mach-s3c24xx/include/mach/dma.h
+++ b/arch/arm/mach-s3c24xx/include/mach/dma.h
@@ -47,6 +47,10 @@ enum dma_ch {
 	DMACH_UART2_SRC2,
 	DMACH_UART3,		/* s3c2443 has extra uart */
 	DMACH_UART3_SRC2,
+	DMACH_SPI0_TX,		/* s3c2443/2416/2450 hsspi0 */
+	DMACH_SPI0_RX,		/* s3c2443/2416/2450 hsspi0 */
+	DMACH_SPI1_TX,		/* s3c2443/2450 hsspi1 */
+	DMACH_SPI1_RX,		/* s3c2443/2450 hsspi1 */
 	DMACH_MAX,		/* the end entry */
 };
 
diff --git a/arch/arm/mach-s3c24xx/include/mach/map.h b/arch/arm/mach-s3c24xx/include/mach/map.h
index 78ae807f1281..8ba381f2dbe1 100644
--- a/arch/arm/mach-s3c24xx/include/mach/map.h
+++ b/arch/arm/mach-s3c24xx/include/mach/map.h
@@ -98,6 +98,8 @@
 
 /* SPI */
 #define S3C2410_PA_SPI	   (0x59000000)
+#define S3C2443_PA_SPI0		(0x52000000)
+#define S3C2443_PA_SPI1		S3C2410_PA_SPI
 
 /* SDI */
 #define S3C2410_PA_SDI	   (0x5A000000)
@@ -162,4 +164,7 @@
 #define S3C_PA_WDT	    S3C2410_PA_WATCHDOG
 #define S3C_PA_NAND	    S3C24XX_PA_NAND
 
+#define S3C_PA_SPI0		S3C2443_PA_SPI0
+#define S3C_PA_SPI1		S3C2443_PA_SPI1
+
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s3c24xx/setup-spi.c b/arch/arm/mach-s3c24xx/setup-spi.c
new file mode 100644
index 000000000000..5712c85f39b1
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/setup-spi.c
@@ -0,0 +1,39 @@
+/*
+ * HS-SPI device setup for S3C2443/S3C2416
+ *
+ * Copyright (C) 2011 Samsung Electronics Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/s3c64xx-spi.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
+	.fifo_lvl_mask	= 0x7f,
+	.rx_lvl_offset	= 13,
+	.tx_st_done	= 21,
+	.high_speed	= 1,
+};
+
+int s3c64xx_spi0_cfg_gpio(struct platform_device *pdev)
+{
+	/* enable hsspi bit in misccr */
+	s3c2410_modify_misccr(S3C2416_MISCCR_HSSPI_EN2, 1);
+
+	s3c_gpio_cfgall_range(S3C2410_GPE(11), 3,
+			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+
+	return 0;
+}
+#endif