ARM: 6649/1: omap: use fncpy to copy the PM code functions to SRAM

The new fncpy API is better suited* for copying some
code to SRAM at runtime. This patch changes the ad-hoc
code to the more generic fncpy API.

*: 1. fncpy ensures that the thumb mode bit is propagated,
   2. fncpy provides the security of type safety between the
     original function and the sram function pointer.

Tested OK on OMAP3 in low power modes (RET/OFF)
using omap2plus_defconfig with !CONFIG_THUMB2_KERNEL.
Compile tested on OMAP1/2 using omap1_defconfig.

Boot tested on OMAP1 & OMAP2
Tested OK with suspend/resume on OMAP2420/n810

Boots fine on osk5912 and n800

Signed-off-by: Jean Pihet <j-pihet@ti.com>
Acked-by: Kevin Hilman <khilman@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Dave Martin <dave.martin@linaro.org>
Tested-by: Kevin Hilman <khilman@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

6 files changed, 12 insertions, 1 deletions

diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 1c1b0ab5b978..39580e6060e8 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -92,7 +92,7 @@ extern void omap24xx_idle_loop_suspend(void);
 extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
 					void __iomem *sdrc_power);
 extern void omap34xx_cpu_suspend(u32 *addr, int save_state);
-extern void save_secure_ram_context(u32 *addr);
+extern int save_secure_ram_context(u32 *addr);
 extern void omap3_save_scratchpad_contents(void);
 
 extern unsigned int omap24xx_idle_loop_suspend_sz;
diff --git a/arch/arm/mach-omap2/sleep24xx.S b/arch/arm/mach-omap2/sleep24xx.S
index c7780cc8d919..b5071a47ec39 100644
--- a/arch/arm/mach-omap2/sleep24xx.S
+++ b/arch/arm/mach-omap2/sleep24xx.S
@@ -47,6 +47,7 @@
  * Note: This code get's copied to internal SRAM at boot. When the OMAP
  *	 wakes up it continues execution at the point it went to sleep.
  */
+	.align	3
 ENTRY(omap24xx_idle_loop_suspend)
 	stmfd	sp!, {r0, lr}		@ save registers on stack
 	mov	r0, #0			@ clear for mcr setup
@@ -82,6 +83,7 @@ ENTRY(omap24xx_idle_loop_suspend_sz)
  * The DLL load value is not kept in RETENTION or OFF.	It needs to be restored
  * at wake
  */
+	.align	3
 ENTRY(omap24xx_cpu_suspend)
 	stmfd	sp!, {r0 - r12, lr}	@ save registers on stack
 	mov	r3, #0x0		@ clear for mcr call
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index 98d8232808b8..951a0be66cf7 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -118,6 +118,7 @@ ENTRY(enable_omap3630_toggle_l2_on_restore)
 
 	.text
 /* Function to call rom code to save secure ram context */
+	.align	3
 ENTRY(save_secure_ram_context)
 	stmfd	sp!, {r1-r12, lr}	@ save registers on stack
 	adr	r3, api_params		@ r3 points to parameters
@@ -169,6 +170,7 @@ ENTRY(save_secure_ram_context_sz)
  *   depending on the low power mode (non-OFF vs OFF modes),
  *   cf. 'Resume path for xxx mode' comments.
  */
+	.align	3
 ENTRY(omap34xx_cpu_suspend)
 	stmfd	sp!, {r0-r12, lr}	@ save registers on stack
 
diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S
index 055310cc77de..ff9b9dbcb30e 100644
--- a/arch/arm/mach-omap2/sram242x.S
+++ b/arch/arm/mach-omap2/sram242x.S
@@ -39,6 +39,7 @@
 
 	.text
 
+	.align	3
 ENTRY(omap242x_sram_ddr_init)
 	stmfd	sp!, {r0 - r12, lr}	@ save registers on stack
 
@@ -143,6 +144,7 @@ ENTRY(omap242x_sram_ddr_init_sz)
  * r0 = [PRCM_FULL | PRCM_HALF] r1 = SDRC_DLLA_CTRL value r2 = [DDR | SDR]
  * PRCM_FULL = 2, PRCM_HALF = 1, DDR = 1, SDR = 0
  */
+	.align	3
 ENTRY(omap242x_sram_reprogram_sdrc)
 	stmfd	sp!, {r0 - r10, lr}	@ save registers on stack
 	mov	r3, #0x0		@ clear for mrc call
@@ -238,6 +240,7 @@ ENTRY(omap242x_sram_reprogram_sdrc_sz)
 /*
  * Set dividers and pll. Also recalculate DLL value for DDR and unlock mode.
  */
+	.align	3
 ENTRY(omap242x_sram_set_prcm)
 	stmfd	sp!, {r0-r12, lr}	@ regs to stack
 	adr	r4, pbegin		@ addr of preload start
diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
index f9007580aea3..76730209fa0e 100644
--- a/arch/arm/mach-omap2/sram243x.S
+++ b/arch/arm/mach-omap2/sram243x.S
@@ -39,6 +39,7 @@
 
 	.text
 
+	.align	3
 ENTRY(omap243x_sram_ddr_init)
 	stmfd	sp!, {r0 - r12, lr}	@ save registers on stack
 
@@ -143,6 +144,7 @@ ENTRY(omap243x_sram_ddr_init_sz)
  * r0 = [PRCM_FULL | PRCM_HALF] r1 = SDRC_DLLA_CTRL value r2 = [DDR | SDR]
  * PRCM_FULL = 2, PRCM_HALF = 1, DDR = 1, SDR = 0
  */
+	.align	3
 ENTRY(omap243x_sram_reprogram_sdrc)
 	stmfd	sp!, {r0 - r10, lr}	@ save registers on stack
 	mov	r3, #0x0		@ clear for mrc call
@@ -238,6 +240,7 @@ ENTRY(omap243x_sram_reprogram_sdrc_sz)
 /*
  * Set dividers and pll. Also recalculate DLL value for DDR and unlock mode.
  */
+	.align	3
 ENTRY(omap243x_sram_set_prcm)
 	stmfd	sp!, {r0-r12, lr}	@ regs to stack
 	adr	r4, pbegin		@ addr of preload start
diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
index 7f893a29d500..25011ca2145d 100644
--- a/arch/arm/mach-omap2/sram34xx.S
+++ b/arch/arm/mach-omap2/sram34xx.S
@@ -111,6 +111,7 @@
  * since it will cause the ARM MMU to attempt to walk the page tables.
  * These crashes may be intermittent.
  */
+	.align	3
 ENTRY(omap3_sram_configure_core_dpll)
 	stmfd	sp!, {r1-r12, lr}	@ store regs to stack