Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (258 commits)
  omap: zoom: host should not pull up wl1271's irq line
  arm: plat-omap: iommu: fix request_mem_region() error path
  OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430
  omap4: mux: Remove duplicate mux modes
  omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flag
  omap: iovmm: disallow mapping NULL address when IOVMF_DA_ANON is set
  omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selected
  omap4: board-omap4panda: Initialise the serial pads
  omap3: board-3430sdp: Initialise the serial pads
  omap4: board-4430sdp: Initialise the serial pads
  omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init
  omap2+: mux: Remove the use of IDLE flag
  omap2+: Add separate list for dynamic pads to mux
  perf: add OMAP support for the new power events
  OMAP4: Add IVA OPP enteries.
  OMAP4: Update Voltage Rail Values for MPU, IVA and CORE
  OMAP4: Enable 800 MHz and 1 GHz MPU-OPP
  OMAP3+: OPP: Replace voltage values with Macros
  OMAP3: wdtimer: Fix CORE idle transition
  Watchdog: omap_wdt: add fine grain runtime-pm
  ...

Fix up various conflicts in
 - arch/arm/mach-omap2/board-omap3evm.c
 - arch/arm/mach-omap2/clock3xxx_data.c
 - arch/arm/mach-omap2/usb-musb.c
 - arch/arm/plat-omap/include/plat/usb.h
 - drivers/usb/musb/musb_core.h

1 files changed, 133 insertions, 149 deletions

diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index 951a0be66cf7..63f10669571a 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -64,6 +64,11 @@
 #define SDRC_DLLA_STATUS_V	OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
 #define SDRC_DLLA_CTRL_V	OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL)
 
+/*
+ * This file needs be built unconditionally as ARM to interoperate correctly
+ * with non-Thumb-2-capable firmware.
+ */
+	.arm
 
 /*
  * API functions
@@ -82,6 +87,8 @@ ENTRY(get_restore_pointer)
 	stmfd	sp!, {lr}	@ save registers on stack
 	adr	r0, restore
 	ldmfd	sp!, {pc}	@ restore regs and return
+ENDPROC(get_restore_pointer)
+	.align
 ENTRY(get_restore_pointer_sz)
 	.word	. - get_restore_pointer
 
@@ -91,6 +98,8 @@ ENTRY(get_omap3630_restore_pointer)
 	stmfd	sp!, {lr}	@ save registers on stack
 	adr	r0, restore_3630
 	ldmfd	sp!, {pc}	@ restore regs and return
+ENDPROC(get_omap3630_restore_pointer)
+	.align
 ENTRY(get_omap3630_restore_pointer_sz)
 	.word	. - get_omap3630_restore_pointer
 
@@ -100,6 +109,8 @@ ENTRY(get_es3_restore_pointer)
 	stmfd	sp!, {lr}	@ save registers on stack
 	adr	r0, restore_es3
 	ldmfd	sp!, {pc}	@ restore regs and return
+ENDPROC(get_es3_restore_pointer)
+	.align
 ENTRY(get_es3_restore_pointer_sz)
 	.word	. - get_es3_restore_pointer
 
@@ -113,8 +124,10 @@ ENTRY(enable_omap3630_toggle_l2_on_restore)
 	stmfd	sp!, {lr}	@ save registers on stack
 	/* Setup so that we will disable and enable l2 */
 	mov	r1, #0x1
-	str	r1, l2dis_3630
+	adrl	r2, l2dis_3630	@ may be too distant for plain adr
+	str	r1, [r2]
 	ldmfd	sp!, {pc}	@ restore regs and return
+ENDPROC(enable_omap3630_toggle_l2_on_restore)
 
 	.text
 /* Function to call rom code to save secure ram context */
@@ -132,20 +145,22 @@ ENTRY(save_secure_ram_context)
 	mov	r1, #0			@ set task id for ROM code in r1
 	mov	r2, #4			@ set some flags in r2, r6
 	mov	r6, #0xff
-	mcr	p15, 0, r0, c7, c10, 4	@ data write barrier
-	mcr	p15, 0, r0, c7, c10, 5	@ data memory barrier
-	.word	0xE1600071		@ call SMI monitor (smi #1)
+	dsb				@ data write barrier
+	dmb				@ data memory barrier
+	smc	#1			@ call SMI monitor (smi #1)
 	nop
 	nop
 	nop
 	nop
 	ldmfd	sp!, {r1-r12, pc}
+	.align
 sram_phy_addr_mask:
 	.word	SRAM_BASE_P
 high_mask:
 	.word	0xffff
 api_params:
 	.word	0x4, 0x0, 0x0, 0x1, 0x1
+ENDPROC(save_secure_ram_context)
 ENTRY(save_secure_ram_context_sz)
 	.word	. - save_secure_ram_context
 
@@ -175,12 +190,12 @@ ENTRY(omap34xx_cpu_suspend)
 	stmfd	sp!, {r0-r12, lr}	@ save registers on stack
 
 	/*
-	 * r0 contains restore pointer in sdram
+	 * r0 contains CPU context save/restore pointer in sdram
 	 * r1 contains information about saving context:
 	 *   0 - No context lost
 	 *   1 - Only L1 and logic lost
-	 *   2 - Only L2 lost
-	 *   3 - Both L1 and L2 lost
+	 *   2 - Only L2 lost (Even L1 is retained we clean it along with L2)
+	 *   3 - Both L1 and L2 lost and logic lost
 	 */
 
 	/* Directly jump to WFI is the context save is not required */
@@ -201,89 +216,74 @@ save_context_wfi:
 	beq	clean_caches
 
 l1_logic_lost:
-	/* Store sp and spsr to SDRAM */
-	mov	r4, sp
-	mrs	r5, spsr
-	mov	r6, lr
+	mov	r4, sp			@ Store sp
+	mrs	r5, spsr		@ Store spsr
+	mov	r6, lr			@ Store lr
 	stmia	r8!, {r4-r6}
-	/* Save all ARM registers */
-	/* Coprocessor access control register */
-	mrc	p15, 0, r6, c1, c0, 2
-	stmia	r8!, {r6}
-	/* TTBR0, TTBR1 and Translation table base control */
-	mrc	p15, 0, r4, c2, c0, 0
-	mrc	p15, 0, r5, c2, c0, 1
-	mrc	p15, 0, r6, c2, c0, 2
-	stmia	r8!, {r4-r6}
-	/*
-	 * Domain access control register, data fault status register,
-	 * and instruction fault status register
-	 */
-	mrc	p15, 0, r4, c3, c0, 0
-	mrc	p15, 0, r5, c5, c0, 0
-	mrc	p15, 0, r6, c5, c0, 1
-	stmia	r8!, {r4-r6}
-	/*
-	 * Data aux fault status register, instruction aux fault status,
-	 * data fault address register and instruction fault address register
-	 */
-	mrc	p15, 0, r4, c5, c1, 0
-	mrc	p15, 0, r5, c5, c1, 1
-	mrc	p15, 0, r6, c6, c0, 0
-	mrc	p15, 0, r7, c6, c0, 2
-	stmia	r8!, {r4-r7}
-	/*
-	 * user r/w thread and process ID, user r/o thread and process ID,
-	 * priv only thread and process ID, cache size selection
-	 */
-	mrc	p15, 0, r4, c13, c0, 2
-	mrc	p15, 0, r5, c13, c0, 3
-	mrc	p15, 0, r6, c13, c0, 4
-	mrc	p15, 2, r7, c0, c0, 0
+
+	mrc	p15, 0, r4, c1, c0, 2	@ Coprocessor access control register
+	mrc	p15, 0, r5, c2, c0, 0	@ TTBR0
+	mrc	p15, 0, r6, c2, c0, 1	@ TTBR1
+	mrc	p15, 0, r7, c2, c0, 2	@ TTBCR
 	stmia	r8!, {r4-r7}
-	/* Data TLB lockdown, instruction TLB lockdown registers */
-	mrc	p15, 0, r5, c10, c0, 0
-	mrc	p15, 0, r6, c10, c0, 1
-	stmia	r8!, {r5-r6}
-	/* Secure or non secure vector base address, FCSE PID, Context PID*/
-	mrc	p15, 0, r4, c12, c0, 0
-	mrc	p15, 0, r5, c13, c0, 0
-	mrc	p15, 0, r6, c13, c0, 1
-	stmia	r8!, {r4-r6}
-	/* Primary remap, normal remap registers */
-	mrc	p15, 0, r4, c10, c2, 0
-	mrc	p15, 0, r5, c10, c2, 1
-	stmia	r8!,{r4-r5}
 
-	/* Store current cpsr*/
-	mrs	r2, cpsr
-	stmia	r8!, {r2}
+	mrc	p15, 0, r4, c3, c0, 0	@ Domain access Control Register
+	mrc	p15, 0, r5, c10, c2, 0	@ PRRR
+	mrc	p15, 0, r6, c10, c2, 1	@ NMRR
+	stmia	r8!,{r4-r6}
 
-	mrc	p15, 0, r4, c1, c0, 0
-	/* save control register */
+	mrc	p15, 0, r4, c13, c0, 1	@ Context ID
+	mrc	p15, 0, r5, c13, c0, 2	@ User r/w thread and process ID
+	mrc	p15, 0, r6, c12, c0, 0	@ Secure or NS vector base address
+	mrs	r7, cpsr		@ Store current cpsr
+	stmia	r8!, {r4-r7}
+
+	mrc	p15, 0, r4, c1, c0, 0	@ save control register
 	stmia	r8!, {r4}
 
 clean_caches:
 	/*
-	 * Clean Data or unified cache to POU
-	 * How to invalidate only L1 cache???? - #FIX_ME#
-	 * mcr	p15, 0, r11, c7, c11, 1
-	 */
-	cmp	r1, #0x1 		@ Check whether L2 inval is required
-	beq	omap3_do_wfi
-
-clean_l2:
-	/*
 	 * jump out to kernel flush routine
 	 *  - reuse that code is better
 	 *  - it executes in a cached space so is faster than refetch per-block
 	 *  - should be faster and will change with kernel
 	 *  - 'might' have to copy address, load and jump to it
+	 * Flush all data from the L1 data cache before disabling
+	 * SCTLR.C bit.
 	 */
 	ldr	r1, kernel_flush
 	mov	lr, pc
 	bx	r1
 
+	/*
+	 * Clear the SCTLR.C bit to prevent further data cache
+	 * allocation. Clearing SCTLR.C would make all the data accesses
+	 * strongly ordered and would not hit the cache.
+	 */
+	mrc	p15, 0, r0, c1, c0, 0
+	bic	r0, r0, #(1 << 2)	@ Disable the C bit
+	mcr	p15, 0, r0, c1, c0, 0
+	isb
+
+	/*
+	 * Invalidate L1 data cache. Even though only invalidate is
+	 * necessary exported flush API is used here. Doing clean
+	 * on already clean cache would be almost NOP.
+	 */
+	ldr	r1, kernel_flush
+	blx	r1
+	/*
+	 * The kernel doesn't interwork: v7_flush_dcache_all in particluar will
+	 * always return in Thumb state when CONFIG_THUMB2_KERNEL is enabled.
+	 * This sequence switches back to ARM.  Note that .align may insert a
+	 * nop: bx pc needs to be word-aligned in order to work.
+	 */
+ THUMB(	.thumb		)
+ THUMB(	.align		)
+ THUMB(	bx	pc	)
+ THUMB(	nop		)
+	.arm
+
 omap3_do_wfi:
 	ldr	r4, sdrc_power		@ read the SDRC_POWER register
 	ldr	r5, [r4]		@ read the contents of SDRC_POWER
@@ -291,9 +291,8 @@ omap3_do_wfi:
 	str	r5, [r4]		@ write back to SDRC_POWER register
 
 	/* Data memory barrier and Data sync barrier */
-	mov	r1, #0
-	mcr	p15, 0, r1, c7, c10, 4
-	mcr	p15, 0, r1, c7, c10, 5
+	dsb
+	dmb
 
 /*
  * ===================================
@@ -319,6 +318,12 @@ omap3_do_wfi:
 	nop
 	bl wait_sdrc_ok
 
+	mrc	p15, 0, r0, c1, c0, 0
+	tst	r0, #(1 << 2)		@ Check C bit enabled?
+	orreq	r0, r0, #(1 << 2)	@ Enable the C bit if cleared
+	mcreq	p15, 0, r0, c1, c0, 0
+	isb
+
 /*
  * ===================================
  * == Exit point from non-OFF modes ==
@@ -408,9 +413,9 @@ skipl2dis:
 	mov	r2, #4			@ set some flags in r2, r6
 	mov	r6, #0xff
 	adr	r3, l2_inv_api_params	@ r3 points to dummy parameters
-	mcr	p15, 0, r0, c7, c10, 4	@ data write barrier
-	mcr	p15, 0, r0, c7, c10, 5	@ data memory barrier
-	.word	0xE1600071		@ call SMI monitor (smi #1)
+	dsb				@ data write barrier
+	dmb				@ data memory barrier
+	smc	#1			@ call SMI monitor (smi #1)
 	/* Write to Aux control register to set some bits */
 	mov	r0, #42			@ set service ID for PPA
 	mov	r12, r0			@ copy secure Service ID in r12
@@ -419,9 +424,9 @@ skipl2dis:
 	mov	r6, #0xff
 	ldr	r4, scratchpad_base
 	ldr	r3, [r4, #0xBC]		@ r3 points to parameters
-	mcr	p15, 0, r0, c7, c10, 4	@ data write barrier
-	mcr	p15, 0, r0, c7, c10, 5	@ data memory barrier
-	.word	0xE1600071		@ call SMI monitor (smi #1)
+	dsb				@ data write barrier
+	dmb				@ data memory barrier
+	smc	#1			@ call SMI monitor (smi #1)
 
 #ifdef CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE
 	/* Restore L2 aux control register */
@@ -434,29 +439,30 @@ skipl2dis:
 	ldr	r4, scratchpad_base
 	ldr	r3, [r4, #0xBC]
 	adds	r3, r3, #8		@ r3 points to parameters
-	mcr	p15, 0, r0, c7, c10, 4	@ data write barrier
-	mcr	p15, 0, r0, c7, c10, 5	@ data memory barrier
-	.word	0xE1600071		@ call SMI monitor (smi #1)
+	dsb				@ data write barrier
+	dmb				@ data memory barrier
+	smc	#1			@ call SMI monitor (smi #1)
 #endif
 	b	logic_l1_restore
 
+	.align
 l2_inv_api_params:
 	.word	0x1, 0x00
 l2_inv_gp:
 	/* Execute smi to invalidate L2 cache */
 	mov r12, #0x1			@ set up to invalidate L2
-	.word 0xE1600070		@ Call SMI monitor (smieq)
+	smc	#0			@ Call SMI monitor (smieq)
 	/* Write to Aux control register to set some bits */
 	ldr	r4, scratchpad_base
 	ldr	r3, [r4,#0xBC]
 	ldr	r0, [r3,#4]
 	mov	r12, #0x3
-	.word	0xE1600070		@ Call SMI monitor (smieq)
+	smc	#0			@ Call SMI monitor (smieq)
 	ldr	r4, scratchpad_base
 	ldr	r3, [r4,#0xBC]
 	ldr	r0, [r3,#12]
 	mov	r12, #0x2
-	.word	0xE1600070		@ Call SMI monitor (smieq)
+	smc	#0			@ Call SMI monitor (smieq)
 logic_l1_restore:
 	ldr	r1, l2dis_3630
 	cmp	r1, #0x1		@ Test if L2 re-enable needed on 3630
@@ -475,68 +481,29 @@ skipl2reen:
 	ldr	r4, scratchpad_base
 	ldr	r3, [r4,#0xBC]
 	adds	r3, r3, #16
+
 	ldmia	r3!, {r4-r6}
-	mov	sp, r4
-	msr	spsr_cxsf, r5
-	mov	lr, r6
-
-	ldmia	r3!, {r4-r9}
-	/* Coprocessor access Control Register */
-	mcr p15, 0, r4, c1, c0, 2
-
-	/* TTBR0 */
-	MCR p15, 0, r5, c2, c0, 0
-	/* TTBR1 */
-	MCR p15, 0, r6, c2, c0, 1
-	/* Translation table base control register */
-	MCR p15, 0, r7, c2, c0, 2
-	/* Domain access Control Register */
-	MCR p15, 0, r8, c3, c0, 0
-	/* Data fault status Register */
-	MCR p15, 0, r9, c5, c0, 0
-
-	ldmia	r3!,{r4-r8}
-	/* Instruction fault status Register */
-	MCR p15, 0, r4, c5, c0, 1
-	/* Data Auxiliary Fault Status Register */
-	MCR p15, 0, r5, c5, c1, 0
-	/* Instruction Auxiliary Fault Status Register*/
-	MCR p15, 0, r6, c5, c1, 1
-	/* Data Fault Address Register */
-	MCR p15, 0, r7, c6, c0, 0
-	/* Instruction Fault Address Register*/
-	MCR p15, 0, r8, c6, c0, 2
-	ldmia	r3!,{r4-r7}
+	mov	sp, r4			@ Restore sp
+	msr	spsr_cxsf, r5		@ Restore spsr
+	mov	lr, r6			@ Restore lr
+
+	ldmia	r3!, {r4-r7}
+	mcr	p15, 0, r4, c1, c0, 2	@ Coprocessor access Control Register
+	mcr	p15, 0, r5, c2, c0, 0	@ TTBR0
+	mcr	p15, 0, r6, c2, c0, 1	@ TTBR1
+	mcr	p15, 0, r7, c2, c0, 2	@ TTBCR
 
-	/* User r/w thread and process ID */
-	MCR p15, 0, r4, c13, c0, 2
-	/* User ro thread and process ID */
-	MCR p15, 0, r5, c13, c0, 3
-	/* Privileged only thread and process ID */
-	MCR p15, 0, r6, c13, c0, 4
-	/* Cache size selection */
-	MCR p15, 2, r7, c0, c0, 0
-	ldmia	r3!,{r4-r8}
-	/* Data TLB lockdown registers */
-	MCR p15, 0, r4, c10, c0, 0
-	/* Instruction TLB lockdown registers */
-	MCR p15, 0, r5, c10, c0, 1
-	/* Secure or Nonsecure Vector Base Address */
-	MCR p15, 0, r6, c12, c0, 0
-	/* FCSE PID */
-	MCR p15, 0, r7, c13, c0, 0
-	/* Context PID */
-	MCR p15, 0, r8, c13, c0, 1
-
-	ldmia	r3!,{r4-r5}
-	/* Primary memory remap register */
-	MCR p15, 0, r4, c10, c2, 0
-	/* Normal memory remap register */
-	MCR p15, 0, r5, c10, c2, 1
-
-	/* Restore cpsr */
-	ldmia	r3!,{r4}		@ load CPSR from SDRAM
-	msr	cpsr, r4		@ store cpsr
+	ldmia	r3!,{r4-r6}
+	mcr	p15, 0, r4, c3, c0, 0	@ Domain access Control Register
+	mcr	p15, 0, r5, c10, c2, 0	@ PRRR
+	mcr	p15, 0, r6, c10, c2, 1	@ NMRR
+
+
+	ldmia	r3!,{r4-r7}
+	mcr	p15, 0, r4, c13, c0, 1	@ Context ID
+	mcr	p15, 0, r5, c13, c0, 2	@ User r/w thread and process ID
+	mrc	p15, 0, r6, c12, c0, 0	@ Secure or NS vector base address
+	msr	cpsr, r7		@ store cpsr
 
 	/* Enabling MMU here */
 	mrc	p15, 0, r7, c2, c0, 2 	@ Read TTBRControl
@@ -594,12 +561,17 @@ usettbr0:
 	ldr	r2, cache_pred_disable_mask
 	and	r4, r2
 	mcr	p15, 0, r4, c1, c0, 0
+	dsb
+	isb
+	ldr     r0, =restoremmu_on
+	bx      r0
 
 /*
  * ==============================
  * == Exit point from OFF mode ==
  * ==============================
  */
+restoremmu_on:
 	ldmfd	sp!, {r0-r12, pc}	@ restore regs and return
 
 
@@ -609,6 +581,7 @@ usettbr0:
 
 /* This function implements the erratum ID i443 WA, applies to 34xx >= ES3.0 */
 	.text
+	.align	3
 ENTRY(es3_sdrc_fix)
 	ldr	r4, sdrc_syscfg		@ get config addr
 	ldr	r5, [r4]		@ get value
@@ -636,6 +609,7 @@ ENTRY(es3_sdrc_fix)
 	str	r5, [r4]		@ kick off refreshes
 	bx	lr
 
+	.align
 sdrc_syscfg:
 	.word	SDRC_SYSCONFIG_P
 sdrc_mr_0:
@@ -650,6 +624,7 @@ sdrc_emr2_1:
 	.word	SDRC_EMR2_1_P
 sdrc_manual_1:
 	.word	SDRC_MANUAL_1_P
+ENDPROC(es3_sdrc_fix)
 ENTRY(es3_sdrc_fix_sz)
 	.word	. - es3_sdrc_fix
 
@@ -684,6 +659,12 @@ wait_sdrc_ready:
 	bic	r5, r5, #0x40
 	str	r5, [r4]
 
+/*
+ * PC-relative stores lead to undefined behaviour in Thumb-2: use a r7 as a
+ * base instead.
+ * Be careful not to clobber r7 when maintaing this code.
+ */
+
 is_dll_in_lock_mode:
 	/* Is dll in lock mode? */
 	ldr	r4, sdrc_dlla_ctrl
@@ -691,10 +672,11 @@ is_dll_in_lock_mode:
 	tst	r5, #0x4
 	bxne	lr			@ Return if locked
 	/* wait till dll locks */
+	adr	r7, kick_counter
 wait_dll_lock_timed:
 	ldr	r4, wait_dll_lock_counter
 	add	r4, r4, #1
-	str	r4, wait_dll_lock_counter
+	str	r4, [r7, #wait_dll_lock_counter - kick_counter]
 	ldr	r4, sdrc_dlla_status
 	/* Wait 20uS for lock */
 	mov	r6, #8
@@ -720,9 +702,10 @@ kick_dll:
 	dsb
 	ldr	r4, kick_counter
 	add	r4, r4, #1
-	str	r4, kick_counter
+	str	r4, [r7]		@ kick_counter
 	b	wait_dll_lock_timed
 
+	.align
 cm_idlest1_core:
 	.word	CM_IDLEST1_CORE_V
 cm_idlest_ckgen:
@@ -765,6 +748,7 @@ kick_counter:
 	.word	0
 wait_dll_lock_counter:
 	.word	0
+ENDPROC(omap34xx_cpu_suspend)
 
 ENTRY(omap34xx_cpu_suspend_sz)
 	.word	. - omap34xx_cpu_suspend