Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:
	arch/sh/kernel/vmlinux.lds.S

1 files changed, 84 insertions, 5 deletions

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 76c355214dc3..574ee67b6181 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -57,6 +57,7 @@ parameter is applicable:
 	ISAPNP	ISA PnP code is enabled.
 	ISDN	Appropriate ISDN support is enabled.
 	JOY	Appropriate joystick support is enabled.
+	KVM	Kernel Virtual Machine support is enabled.
 	LIBATA  Libata driver is enabled
 	LP	Printer support is enabled.
 	LOOP	Loopback device support is enabled.
@@ -1098,6 +1099,44 @@ and is between 256 and 4096 characters. It is defined in the file
 	kstack=N	[X86] Print N words from the kernel stack
 			in oops dumps.
 
+	kvm.ignore_msrs=[KVM] Ignore guest accesses to unhandled MSRs.
+			Default is 0 (don't ignore, but inject #GP)
+
+	kvm.oos_shadow=	[KVM] Disable out-of-sync shadow paging.
+			Default is 1 (enabled)
+
+	kvm-amd.nested=	[KVM,AMD] Allow nested virtualization in KVM/SVM.
+			Default is 0 (off)
+
+	kvm-amd.npt=	[KVM,AMD] Disable nested paging (virtualized MMU)
+			for all guests.
+			Default is 1 (enabled) if in 64bit or 32bit-PAE mode
+
+	kvm-intel.bypass_guest_pf=
+			[KVM,Intel] Disables bypassing of guest page faults
+			on Intel chips. Default is 1 (enabled)
+
+	kvm-intel.ept=	[KVM,Intel] Disable extended page tables
+			(virtualized MMU) support on capable Intel chips.
+			Default is 1 (enabled)
+
+	kvm-intel.emulate_invalid_guest_state=
+			[KVM,Intel] Enable emulation of invalid guest states
+			Default is 0 (disabled)
+
+	kvm-intel.flexpriority=
+			[KVM,Intel] Disable FlexPriority feature (TPR shadow).
+			Default is 1 (enabled)
+
+	kvm-intel.unrestricted_guest=
+			[KVM,Intel] Disable unrestricted guest feature
+			(virtualized real and unpaged mode) on capable
+			Intel chips. Default is 1 (enabled)
+
+	kvm-intel.vpid=	[KVM,Intel] Disable Virtual Processor Identification
+			feature (tagged TLBs) on capable Intel chips.
+			Default is 1 (enabled)
+
 	l2cr=		[PPC]
 
 	l3cr=		[PPC]
@@ -1503,6 +1542,14 @@ and is between 256 and 4096 characters. It is defined in the file
 			[NFS] set the TCP port on which the NFSv4 callback
 			channel should listen.
 
+	nfs.cache_getent=
+			[NFS] sets the pathname to the program which is used
+			to update the NFS client cache entries.
+
+	nfs.cache_getent_timeout=
+			[NFS] sets the timeout after which an attempt to
+			update a cache entry is deemed to have failed.
+
 	nfs.idmap_cache_timeout=
 			[NFS] set the maximum lifetime for idmapper cache
 			entries.
@@ -1535,6 +1582,11 @@ and is between 256 and 4096 characters. It is defined in the file
 			symbolic names: lapic and ioapic
 			Example: nmi_watchdog=2 or nmi_watchdog=panic,lapic
 
+	netpoll.carrier_timeout=
+			[NET] Specifies amount of time (in seconds) that
+			netpoll should wait for a carrier. By default netpoll
+			waits 4 seconds.
+
 	no387		[BUGS=X86-32] Tells the kernel to use the 387 maths
 			emulation library even if a 387 maths coprocessor
 			is present.
@@ -1919,11 +1971,12 @@ and is between 256 and 4096 characters. It is defined in the file
 			Format: { 0 | 1 }
 			See arch/parisc/kernel/pdc_chassis.c
 
-	percpu_alloc=	[X86] Select which percpu first chunk allocator to use.
-			Allowed values are one of "lpage", "embed" and "4k".
-			See comments in arch/x86/kernel/setup_percpu.c for
-			details on each allocator.  This parameter is primarily
-			for debugging and performance comparison.
+	percpu_alloc=	Select which percpu first chunk allocator to use.
+			Currently supported values are "embed" and "page".
+			Archs may support subset or none of the	selections.
+			See comments in mm/percpu.c for details on each
+			allocator.  This parameter is primarily	for debugging
+			and performance comparison.
 
 	pf.		[PARIDE]
 			See Documentation/blockdev/paride.txt.
@@ -2395,6 +2448,18 @@ and is between 256 and 4096 characters. It is defined in the file
 	stifb=		[HW]
 			Format: bpp:<bpp1>[:<bpp2>[:<bpp3>...]]
 
+	sunrpc.min_resvport=
+	sunrpc.max_resvport=
+			[NFS,SUNRPC]
+			SunRPC servers often require that client requests
+			originate from a privileged port (i.e. a port in the
+			range 0 < portnr < 1024).
+			An administrator who wishes to reserve some of these
+			ports for other uses may adjust the range that the
+			kernel's sunrpc client considers to be privileged
+			using these two parameters to set the minimum and
+			maximum port values.
+
 	sunrpc.pool_mode=
 			[NFS]
 			Control how the NFS server code allocates CPUs to
@@ -2411,6 +2476,15 @@ and is between 256 and 4096 characters. It is defined in the file
 			pernode	    one pool for each NUMA node (equivalent
 				    to global on non-NUMA machines)
 
+	sunrpc.tcp_slot_table_entries=
+	sunrpc.udp_slot_table_entries=
+			[NFS,SUNRPC]
+			Sets the upper limit on the number of simultaneous
+			RPC calls that can be sent from the client to a
+			server. Increasing these values may allow you to
+			improve throughput, but will also increase the
+			amount of memory reserved for use by the client.
+
 	swiotlb=	[IA-64] Number of I/O TLB slabs
 
 	switches=	[HW,M68k]
@@ -2480,6 +2554,11 @@ and is between 256 and 4096 characters. It is defined in the file
 	trace_buf_size=nn[KMG]
 			[FTRACE] will set tracing buffer size.
 
+	trace_event=[event-list]
+			[FTRACE] Set and start specified trace events in order
+			to facilitate early boot debugging.
+			See also Documentation/trace/events.txt
+
 	trix=		[HW,OSS] MediaTrix AudioTrix Pro
 			Format:
 			<io>,<irq>,<dma>,<dma2>,<sb_io>,<sb_irq>,<sb_dma>,<mpu_io>,<mpu_irq>