xfree86: use sed rather than cpp to perform string substitutions

Makefile.am: there are only 4 string substitutions to be done in this file.
SED is much simpler than the C pre processor which adds its own
strings which must be substituted by sed, still.

xorgconf.cpp: replaced __xconfigfile__ with xorg.conf as this file name
is hard coded in the xserver configuration and cannot change.
Replace XCOMM with # permanently.

Delete cpprules.in as it isn't used anywhere else. Should one need
cpprules for real cpp work, there is one in Xquartz from which the
the old man pages code have been stripped.

Fix trailing spaces.

Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>

1 files changed, 305 insertions, 305 deletions

diff --git a/hw/xfree86/xorgconf.cpp b/hw/xfree86/xorgconf.cpp
index 8f0c83014..cd6d4a983 100644
--- a/hw/xfree86/xorgconf.cpp
+++ b/hw/xfree86/xorgconf.cpp
@@ -1,73 +1,73 @@
-XCOMM
-XCOMM Copyright (c) 1994-1998 by The XFree86 Project, Inc.
-XCOMM
-XCOMM Permission is hereby granted, free of charge, to any person obtaining a
-XCOMM copy of this software and associated documentation files (the "Software"),
-XCOMM to deal in the Software without restriction, including without limitation
-XCOMM the rights to use, copy, modify, merge, publish, distribute, sublicense,
-XCOMM and/or sell copies of the Software, and to permit persons to whom the
-XCOMM Software is furnished to do so, subject to the following conditions:
-XCOMM 
-XCOMM The above copyright notice and this permission notice shall be included in
-XCOMM all copies or substantial portions of the Software.
-XCOMM 
-XCOMM THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-XCOMM IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-XCOMM FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
-XCOMM THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-XCOMM WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
-XCOMM OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-XCOMM SOFTWARE.
-XCOMM 
-XCOMM Except as contained in this notice, the name of the XFree86 Project shall
-XCOMM not be used in advertising or otherwise to promote the sale, use or other
-XCOMM dealings in this Software without prior written authorization from the
-XCOMM XFree86 Project.
-XCOMM
-XCOMM $XConsortium: XF86Conf.cpp /main/22 1996/10/23 11:43:51 kaleb $
-
-XCOMM **********************************************************************
-XCOMM This is a sample configuration file only, intended to illustrate
-XCOMM what a config file might look like.  Refer to the __xconfigfile__(__filemansuffix__)
-XCOMM man page for details about the format of this file. 
-XCOMM **********************************************************************
-
-XCOMM The ordering of sections is not important in XFree86 4.0 and later,
-XCOMM nor in any Xorg release.
-
-XCOMM **********************************************************************
-XCOMM Files section.  This allows default font and module paths to be set
-XCOMM **********************************************************************
+#
+# Copyright (c) 1994-1998 by The XFree86 Project, Inc.
+#
+# Permission is hereby granted, free of charge, to any person obtaining a
+# copy of this software and associated documentation files (the "Software"),
+# to deal in the Software without restriction, including without limitation
+# the rights to use, copy, modify, merge, publish, distribute, sublicense,
+# and/or sell copies of the Software, and to permit persons to whom the
+# Software is furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+# SOFTWARE.
+#
+# Except as contained in this notice, the name of the XFree86 Project shall
+# not be used in advertising or otherwise to promote the sale, use or other
+# dealings in this Software without prior written authorization from the
+# XFree86 Project.
+#
+# $XConsortium: XF86Conf.cpp /main/22 1996/10/23 11:43:51 kaleb $
+
+# **********************************************************************
+# This is a sample configuration file only, intended to illustrate
+# what a config file might look like.  Refer to the xorg.conf(__filemansuffix__)
+# man page for details about the format of this file.
+# **********************************************************************
+
+# The ordering of sections is not important in XFree86 4.0 and later,
+# nor in any Xorg release.
+
+# **********************************************************************
+# Files section.  This allows default font and module paths to be set
+# **********************************************************************
 
 Section "Files"
 
-XCOMM Multiple FontPath entries are allowed (which are concatenated together),
-XCOMM as well as specifying multiple comma-separated entries in one FontPath
-XCOMM command (or a combination of both methods).
-XCOMM The default path is shown here.
+# Multiple FontPath entries are allowed (which are concatenated together),
+# as well as specifying multiple comma-separated entries in one FontPath
+# command (or a combination of both methods).
+# The default path is shown here.
 
-XCOMM    FontPath	DEFAULTFONTPATH
+#    FontPath	DEFAULTFONTPATH
 
-XCOMM ModulePath can be used to set a search path for the X server modules.
-XCOMM The default path is shown here.
+# ModulePath can be used to set a search path for the X server modules.
+# The default path is shown here.
 
-XCOMM    ModulePath	MODULEPATH
+#    ModulePath	MODULEPATH
 
 EndSection
 
-XCOMM **********************************************************************
-XCOMM Module section -- this is an optional section which is used to specify
-XCOMM which run-time loadable modules to load when the X server starts up.
-XCOMM **********************************************************************
+# **********************************************************************
+# Module section -- this is an optional section which is used to specify
+# which run-time loadable modules to load when the X server starts up.
+# **********************************************************************
 
 Section "Module"
 
-XCOMM This loads the DBE extension module.
+# This loads the DBE extension module.
 
     Load	"dbe"
 
-XCOMM This loads the miscellaneous extensions module, and disables
-XCOMM initialisation of the XFree86-DGA extension within that module.
+# This loads the miscellaneous extensions module, and disables
+# initialisation of the XFree86-DGA extension within that module.
 
     SubSection	"extmod"
 	Option	"omit xfree86-dga"
@@ -76,53 +76,53 @@ XCOMM initialisation of the XFree86-DGA extension within that module.
 EndSection
 
 
-XCOMM **********************************************************************
-XCOMM Server flags section.  This contains various server-wide Options.
-XCOMM **********************************************************************
+# **********************************************************************
+# Server flags section.  This contains various server-wide Options.
+# **********************************************************************
 
 Section "ServerFlags"
 
-XCOMM Uncomment this to cause a core dump at the spot where a signal is 
-XCOMM received.  This may leave the console in an unusable state, but may
-XCOMM provide a better stack trace in the core dump to aid in debugging
+# Uncomment this to cause a core dump at the spot where a signal is
+# received.  This may leave the console in an unusable state, but may
+# provide a better stack trace in the core dump to aid in debugging
 
-XCOMM    Option	"NoTrapSignals"
+#    Option	"NoTrapSignals"
 
-XCOMM Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
-XCOMM (where n is 1 through 12).  This allows clients to receive these key
-XCOMM events.
+# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
+# (where n is 1 through 12).  This allows clients to receive these key
+# events.
 
-XCOMM    Option	"DontVTSwitch"
+#    Option	"DontVTSwitch"
 
-XCOMM Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
-XCOMM This allows clients to receive this key event.
+# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
+# This allows clients to receive this key event.
 
-XCOMM    Option	"DontZap"	"false"
+#    Option	"DontZap"	"false"
 
-XCOMM Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
-XCOMM sequences.  This allows clients to receive these key events.
+# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
+# sequences.  This allows clients to receive these key events.
 
-XCOMM    Option	"DontZoom"
+#    Option	"DontZoom"
 
-XCOMM Uncomment this to disable tuning with the xvidtune client. With
-XCOMM it the client can still run and fetch card and monitor attributes,
-XCOMM but it will not be allowed to change them. If it tries it will
-XCOMM receive a protocol error.
+# Uncomment this to disable tuning with the xvidtune client. With
+# it the client can still run and fetch card and monitor attributes,
+# but it will not be allowed to change them. If it tries it will
+# receive a protocol error.
 
-XCOMM    Option	"DisableVidModeExtension"
+#    Option	"DisableVidModeExtension"
 
-XCOMM Uncomment this to enable the use of a non-local xvidtune client.
+# Uncomment this to enable the use of a non-local xvidtune client.
 
-XCOMM    Option	"AllowNonLocalXvidtune"
+#    Option	"AllowNonLocalXvidtune"
 
-XCOMM Set the basic blanking screen saver timeout.
+# Set the basic blanking screen saver timeout.
 
     Option	"BlankTime"	"10"	# 10 minutes
 
-XCOMM Set the DPMS timeouts.  These are set here because they are global
-XCOMM rather than screen-specific.  These settings alone don't enable DPMS.
-XCOMM It is enabled per-screen (or per-monitor), and even then only when
-XCOMM the driver supports it.
+# Set the DPMS timeouts.  These are set here because they are global
+# rather than screen-specific.  These settings alone don't enable DPMS.
+# It is enabled per-screen (or per-monitor), and even then only when
+# the driver supports it.
 
     Option	"StandbyTime"	"10"	# 10 minutes
     Option	"SuspendTime"	"10"	# 10 minutes
@@ -130,115 +130,115 @@ XCOMM the driver supports it.
 
 EndSection
 
-XCOMM **********************************************************************
-XCOMM Input devices
-XCOMM **********************************************************************
+# **********************************************************************
+# Input devices
+# **********************************************************************
 
-XCOMM **********************************************************************
-XCOMM Core keyboard's InputDevice section
-XCOMM **********************************************************************
+# **********************************************************************
+# Core keyboard's InputDevice section
+# **********************************************************************
 
 Section "InputDevice"
 
     Identifier	"Keyboard1"
     Driver	"kbd"
 
-XCOMM Set the keyboard auto repeat parameters.  Not all platforms implement
-XCOMM this.
+# Set the keyboard auto repeat parameters.  Not all platforms implement
+# this.
 
     Option	"AutoRepeat"	"500 5"
 
-XCOMM Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)).
-
-XCOMM    Option	"Xleds"	"1 2 3"
-
-XCOMM To customise the XKB settings to suit your keyboard, modify the
-XCOMM lines below (which are the defaults).  For example, for a European
-XCOMM keyboard, you will probably want to use one of:
-XCOMM
-XCOMM    Option	"XkbModel"	"pc102"
-XCOMM    Option	"XkbModel"	"pc105"
-XCOMM
-XCOMM If you have a Microsoft Natural keyboard, you can use:
-XCOMM
-XCOMM    Option	"XkbModel"	"microsoft"
-XCOMM
-XCOMM If you have a US "windows" keyboard you will want:
-XCOMM
-XCOMM    Option	"XkbModel"	"pc104"
-XCOMM
-XCOMM Then to change the language, change the Layout setting.
-XCOMM For example, a german layout can be obtained with:
-XCOMM
-XCOMM    Option	"XkbLayout"	"de"
-XCOMM
-XCOMM or:
-XCOMM
-XCOMM    Option	"XkbLayout"	"de"
-XCOMM    Option	"XkbVariant"	"nodeadkeys"
-XCOMM
-XCOMM If you'd like to switch the positions of your capslock and
-XCOMM control keys, use:
-XCOMM
-XCOMM    Option	"XkbOptions"	"ctrl:swapcaps"
-
-
-XCOMM These are the default XKB settings for xorg
-XCOMM
-XCOMM    Option	"XkbRules"	"xorg"
-XCOMM    Option	"XkbModel"	"pc105"
-XCOMM    Option	"XkbLayout"	"us"
-XCOMM    Option	"XkbVariant"	""
-XCOMM    Option	"XkbOptions"	""
+# Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)).
+
+#    Option	"Xleds"	"1 2 3"
+
+# To customise the XKB settings to suit your keyboard, modify the
+# lines below (which are the defaults).  For example, for a European
+# keyboard, you will probably want to use one of:
+#
+#    Option	"XkbModel"	"pc102"
+#    Option	"XkbModel"	"pc105"
+#
+# If you have a Microsoft Natural keyboard, you can use:
+#
+#    Option	"XkbModel"	"microsoft"
+#
+# If you have a US "windows" keyboard you will want:
+#
+#    Option	"XkbModel"	"pc104"
+#
+# Then to change the language, change the Layout setting.
+# For example, a german layout can be obtained with:
+#
+#    Option	"XkbLayout"	"de"
+#
+# or:
+#
+#    Option	"XkbLayout"	"de"
+#    Option	"XkbVariant"	"nodeadkeys"
+#
+# If you'd like to switch the positions of your capslock and
+# control keys, use:
+#
+#    Option	"XkbOptions"	"ctrl:swapcaps"
+
+
+# These are the default XKB settings for xorg
+#
+#    Option	"XkbRules"	"xorg"
+#    Option	"XkbModel"	"pc105"
+#    Option	"XkbLayout"	"us"
+#    Option	"XkbVariant"	""
+#    Option	"XkbOptions"	""
 
 EndSection
 
 
-XCOMM **********************************************************************
-XCOMM Core Pointer's InputDevice section
-XCOMM **********************************************************************
+# **********************************************************************
+# Core Pointer's InputDevice section
+# **********************************************************************
 
 Section "InputDevice"
 
-XCOMM Identifier and driver
+# Identifier and driver
 
     Identifier	"Mouse1"
     Driver	"mouse"
 
-XCOMM The mouse protocol and device.  The device is normally set to /dev/mouse,
-XCOMM which is usually a symbolic link to the real device.
+# The mouse protocol and device.  The device is normally set to /dev/mouse,
+# which is usually a symbolic link to the real device.
 
     Option	"Protocol"	"Microsoft"
     Option	"Device"	"/dev/mouse"
 
-XCOMM On platforms where PnP mouse detection is supported the following
-XCOMM protocol setting can be used when using a newer PnP mouse:
+# On platforms where PnP mouse detection is supported the following
+# protocol setting can be used when using a newer PnP mouse:
 
-XCOMM    Option	"Protocol"	"Auto"
+#    Option	"Protocol"	"Auto"
 
-XCOMM When using mouse connected to a PS/2 port (aka "MousePort"), set the
-XCOMM the protocol as follows.  On some platforms some other settings may
-XCOMM be available.
+# When using mouse connected to a PS/2 port (aka "MousePort"), set the
+# the protocol as follows.  On some platforms some other settings may
+# be available.
 
-XCOMM    Option "Protocol"	"PS/2"
+#    Option "Protocol"	"PS/2"
 
-XCOMM Baudrate and SampleRate are only for some older Logitech mice.  In
-XCOMM almost every case these lines should be omitted.
+# Baudrate and SampleRate are only for some older Logitech mice.  In
+# almost every case these lines should be omitted.
 
-XCOMM    Option	"BaudRate"	"9600"
-XCOMM    Option	"SampleRate"	"150"
+#    Option	"BaudRate"	"9600"
+#    Option	"SampleRate"	"150"
 
-XCOMM Emulate3Buttons is an option for 2-button mice
-XCOMM Emulate3Timeout is the timeout in milliseconds (default is 50ms)
+# Emulate3Buttons is an option for 2-button mice
+# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
 
-XCOMM    Option	"Emulate3Buttons"
-XCOMM    Option	"Emulate3Timeout"	"50"
+#    Option	"Emulate3Buttons"
+#    Option	"Emulate3Timeout"	"50"
 
-XCOMM ChordMiddle is an option for some 3-button Logitech mice, or any
-XCOMM 3-button mouse where the middle button generates left+right button
-XCOMM events.
+# ChordMiddle is an option for some 3-button Logitech mice, or any
+# 3-button mouse where the middle button generates left+right button
+# events.
 
-XCOMM    Option	"ChordMiddle"
+#    Option	"ChordMiddle"
 
 EndSection
 
@@ -249,91 +249,91 @@ Section "InputDevice"
     Option	"Device"	"/dev/mouse2"
 EndSection
 
-XCOMM Some examples of extended input devices
-
-XCOMM Section "InputDevice"
-XCOMM    Identifier	"spaceball"
-XCOMM    Driver	"magellan"
-XCOMM    Option	"Device"	"/dev/cua0"
-XCOMM EndSection
-XCOMM
-XCOMM Section "InputDevice"
-XCOMM    Identifier	"spaceball2"
-XCOMM    Driver	"spaceorb"
-XCOMM    Option	"Device"	"/dev/cua0"
-XCOMM EndSection
-XCOMM
-XCOMM Section "InputDevice"
-XCOMM    Identifier	"touchscreen0"
-XCOMM    Driver	"microtouch"
-XCOMM    Option	"Device"	"/dev/ttyS0"
-XCOMM    Option	"MinX"		"1412"
-XCOMM    Option	"MaxX"		"15184"
-XCOMM    Option	"MinY"		"15372"
-XCOMM    Option	"MaxY"		"1230"
-XCOMM    Option	"ScreenNumber"	"0"
-XCOMM    Option	"ReportingMode"	"Scaled"
-XCOMM    Option	"ButtonNumber"	"1"
-XCOMM    Option	"SendCoreEvents"
-XCOMM EndSection
-XCOMM
-XCOMM Section "InputDevice"
-XCOMM    Identifier	"touchscreen1"
-XCOMM    Driver	"elo2300"
-XCOMM    Option	"Device"	"/dev/ttyS0"
-XCOMM    Option	"MinX"		"231"
-XCOMM    Option	"MaxX"		"3868"
-XCOMM    Option	"MinY"		"3858"
-XCOMM    Option	"MaxY"		"272"
-XCOMM    Option	"ScreenNumber"	"0"
-XCOMM    Option	"ReportingMode"	"Scaled"
-XCOMM    Option	"ButtonThreshold"	"17"
-XCOMM    Option	"ButtonNumber"	"1"
-XCOMM    Option	"SendCoreEvents"
-XCOMM EndSection
-
-XCOMM **********************************************************************
-XCOMM Monitor section
-XCOMM **********************************************************************
-
-XCOMM Any number of monitor sections may be present
+# Some examples of extended input devices
+
+# Section "InputDevice"
+#    Identifier	"spaceball"
+#    Driver	"magellan"
+#    Option	"Device"	"/dev/cua0"
+# EndSection
+#
+# Section "InputDevice"
+#    Identifier	"spaceball2"
+#    Driver	"spaceorb"
+#    Option	"Device"	"/dev/cua0"
+# EndSection
+#
+# Section "InputDevice"
+#    Identifier	"touchscreen0"
+#    Driver	"microtouch"
+#    Option	"Device"	"/dev/ttyS0"
+#    Option	"MinX"		"1412"
+#    Option	"MaxX"		"15184"
+#    Option	"MinY"		"15372"
+#    Option	"MaxY"		"1230"
+#    Option	"ScreenNumber"	"0"
+#    Option	"ReportingMode"	"Scaled"
+#    Option	"ButtonNumber"	"1"
+#    Option	"SendCoreEvents"
+# EndSection
+#
+# Section "InputDevice"
+#    Identifier	"touchscreen1"
+#    Driver	"elo2300"
+#    Option	"Device"	"/dev/ttyS0"
+#    Option	"MinX"		"231"
+#    Option	"MaxX"		"3868"
+#    Option	"MinY"		"3858"
+#    Option	"MaxY"		"272"
+#    Option	"ScreenNumber"	"0"
+#    Option	"ReportingMode"	"Scaled"
+#    Option	"ButtonThreshold"	"17"
+#    Option	"ButtonNumber"	"1"
+#    Option	"SendCoreEvents"
+# EndSection
+
+# **********************************************************************
+# Monitor section
+# **********************************************************************
+
+# Any number of monitor sections may be present
 
 Section "Monitor"
 
-XCOMM The identifier line must be present.
+# The identifier line must be present.
 
     Identifier	"Generic Monitor"
 
-XCOMM HorizSync is in kHz unless units are specified.
-XCOMM HorizSync may be a comma separated list of discrete values, or a
-XCOMM comma separated list of ranges of values.
-XCOMM NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
-XCOMM USER MANUAL FOR THE CORRECT NUMBERS.
+# HorizSync is in kHz unless units are specified.
+# HorizSync may be a comma separated list of discrete values, or a
+# comma separated list of ranges of values.
+# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
+# USER MANUAL FOR THE CORRECT NUMBERS.
 
-XCOMM    HorizSync	31.5  # typical for a single frequency fixed-sync monitor
-XCOMM    HorizSync	30-64         # multisync
-XCOMM    HorizSync	31.5, 35.2    # multiple fixed sync frequencies
-XCOMM    HorizSync	15-25, 30-50  # multiple ranges of sync frequencies
+#    HorizSync	31.5  # typical for a single frequency fixed-sync monitor
+#    HorizSync	30-64         # multisync
+#    HorizSync	31.5, 35.2    # multiple fixed sync frequencies
+#    HorizSync	15-25, 30-50  # multiple ranges of sync frequencies
 
-XCOMM VertRefresh is in Hz unless units are specified.
-XCOMM VertRefresh may be a comma separated list of discrete values, or a
-XCOMM comma separated list of ranges of values.
-XCOMM NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
-XCOMM USER MANUAL FOR THE CORRECT NUMBERS.
+# VertRefresh is in Hz unless units are specified.
+# VertRefresh may be a comma separated list of discrete values, or a
+# comma separated list of ranges of values.
+# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
+# USER MANUAL FOR THE CORRECT NUMBERS.
 
-XCOMM    VertRefresh	60  # typical for a single frequency fixed-sync monitor
+#    VertRefresh	60  # typical for a single frequency fixed-sync monitor
 
-XCOMM    VertRefresh	50-100        # multisync
-XCOMM    VertRefresh	60, 65        # multiple fixed sync frequencies
-XCOMM    VertRefresh	40-50, 80-100 # multiple ranges of sync frequencies
+#    VertRefresh	50-100        # multisync
+#    VertRefresh	60, 65        # multiple fixed sync frequencies
+#    VertRefresh	40-50, 80-100 # multiple ranges of sync frequencies
 
-XCOMM Modes can be specified in two formats.  A compact one-line format, or
-XCOMM a multi-line format.
+# Modes can be specified in two formats.  A compact one-line format, or
+# a multi-line format.
 
-XCOMM A generic VGA 640x480 mode (hsync = 31.5kHz, refresh = 60Hz)
-XCOMM These two are equivalent
+# A generic VGA 640x480 mode (hsync = 31.5kHz, refresh = 60Hz)
+# These two are equivalent
 
-XCOMM    ModeLine "640x480" 25.175 640 664 760 800 480 491 493 525
+#    ModeLine "640x480" 25.175 640 664 760 800 480 491 493 525
 
     Mode "640x480"
         DotClock	25.175
@@ -341,75 +341,75 @@ XCOMM    ModeLine "640x480" 25.175 640 664 760 800 480 491 493 525
         VTimings	480 491 493 525
     EndMode
 
-XCOMM These two are equivalent
+# These two are equivalent
 
-XCOMM    ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace
+#    ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace
 
-XCOMM    Mode "1024x768i"
-XCOMM        DotClock	45
-XCOMM        HTimings	1024 1048 1208 1264
-XCOMM        VTimings	768 776 784 817
-XCOMM        Flags		"Interlace"
-XCOMM    EndMode
+#    Mode "1024x768i"
+#        DotClock	45
+#        HTimings	1024 1048 1208 1264
+#        VTimings	768 776 784 817
+#        Flags		"Interlace"
+#    EndMode
 
-XCOMM If a monitor has DPMS support, that can be indicated here.  This will
-XCOMM enable DPMS when the monitor is used with drivers that support it.
+# If a monitor has DPMS support, that can be indicated here.  This will
+# enable DPMS when the monitor is used with drivers that support it.
 
-XCOMM    Option	"dpms"
+#    Option	"dpms"
 
-XCOMM If a monitor requires that the sync signals be superimposed on the
-XCOMM green signal, the following option will enable this when used with
-XCOMM drivers that support it.  Only a relatively small range of hardware
-XCOMM (and drivers) actually support this.
+# If a monitor requires that the sync signals be superimposed on the
+# green signal, the following option will enable this when used with
+# drivers that support it.  Only a relatively small range of hardware
+# (and drivers) actually support this.
 
-XCOMM    Option	"sync on green"
+#    Option	"sync on green"
 
 EndSection
 
-XCOMM **********************************************************************
-XCOMM Graphics device section
-XCOMM **********************************************************************
+# **********************************************************************
+# Graphics device section
+# **********************************************************************
 
-XCOMM Any number of graphics device sections may be present
+# Any number of graphics device sections may be present
 
 Section "Device"
 
-XCOMM The Identifier must be present.
+# The Identifier must be present.
 
     Identifier	"Generic VESA"
 
-XCOMM The Driver line must be present.  When using run-time loadable driver
-XCOMM modules, this line instructs the server to load the specified driver
-XCOMM module.  Even when not using loadable driver modules, this line
-XCOMM indicates which driver should interpret the information in this section.
+# The Driver line must be present.  When using run-time loadable driver
+# modules, this line instructs the server to load the specified driver
+# module.  Even when not using loadable driver modules, this line
+# indicates which driver should interpret the information in this section.
 
     Driver	"vesa"
 
-XCOMM The chipset line is optional in most cases.  It can be used to override
-XCOMM the driver's chipset detection, and should not normally be specified.
+# The chipset line is optional in most cases.  It can be used to override
+# the driver's chipset detection, and should not normally be specified.
 
-XCOMM    Chipset	"generic"
+#    Chipset	"generic"
 
-XCOMM Various other lines can be specified to override the driver's automatic
-XCOMM detection code.  In most cases they are not needed.
+# Various other lines can be specified to override the driver's automatic
+# detection code.  In most cases they are not needed.
 
-XCOMM    VideoRam	256
-XCOMM    Clocks	25.2 28.3
+#    VideoRam	256
+#    Clocks	25.2 28.3
 
-XCOMM The BusID line is used to specify which of possibly multiple devices
-XCOMM this section is intended for.  When this line isn't present, a device
-XCOMM section can only match up with the primary video device.  For PCI
-XCOMM devices a line like the following could be used.  This line should not
-XCOMM normally be included unless there is more than one video device
-XCOMM intalled.
+# The BusID line is used to specify which of possibly multiple devices
+# this section is intended for.  When this line isn't present, a device
+# section can only match up with the primary video device.  For PCI
+# devices a line like the following could be used.  This line should not
+# normally be included unless there is more than one video device
+# intalled.
 
-XCOMM    BusID	"PCI:0:10:0"
+#    BusID	"PCI:0:10:0"
 
-XCOMM Various option lines can be added here as required.  Some options
-XCOMM are more appropriate in Screen sections, Display subsections or even
-XCOMM Monitor sections.
+# Various option lines can be added here as required.  Some options
+# are more appropriate in Screen sections, Display subsections or even
+# Monitor sections.
 
-XCOMM    Option	"hw cursor" "off"
+#    Option	"hw cursor" "off"
 
 EndSection
 
@@ -433,24 +433,24 @@ Section "Device"
 EndSection
 
 
-XCOMM **********************************************************************
-XCOMM Screen sections.
-XCOMM **********************************************************************
+# **********************************************************************
+# Screen sections.
+# **********************************************************************
 
-XCOMM Any number of screen sections may be present.  Each describes
-XCOMM the configuration of a single screen.  A single specific screen section
-XCOMM may be specified from the X server command line with the "-screen"
-XCOMM option.
+# Any number of screen sections may be present.  Each describes
+# the configuration of a single screen.  A single specific screen section
+# may be specified from the X server command line with the "-screen"
+# option.
 
 Section "Screen"
 
-XCOMM The Identifier, Device and Monitor lines must be present
+# The Identifier, Device and Monitor lines must be present
 
     Identifier	"Screen 1"
     Device	"Generic VESA"
     Monitor	"Generic Monitor"
 
-XCOMM The favoured Depth and/or Bpp may be specified here
+# The favoured Depth and/or Bpp may be specified here
 
     DefaultDepth 8
 
@@ -480,7 +480,7 @@ Section "Screen"
     Monitor		"Generic Monitor"
     Option		"no accel"
     DefaultDepth	16
-XCOMM    DefaultDepth	24
+#    DefaultDepth	24
 
     SubSection "Display"
 	Depth		8
@@ -514,38 +514,38 @@ Section "Screen"
 EndSection
 
 
-XCOMM **********************************************************************
-XCOMM ServerLayout sections.
-XCOMM **********************************************************************
+# **********************************************************************
+# ServerLayout sections.
+# **********************************************************************
 
-XCOMM Any number of ServerLayout sections may be present.  Each describes
-XCOMM the way multiple screens are organised.  A specific ServerLayout
-XCOMM section may be specified from the X server command line with the
-XCOMM "-layout" option.  In the absence of this, the first section is used.
-XCOMM When now ServerLayout section is present, the first Screen section
-XCOMM is used alone.
+# Any number of ServerLayout sections may be present.  Each describes
+# the way multiple screens are organised.  A specific ServerLayout
+# section may be specified from the X server command line with the
+# "-layout" option.  In the absence of this, the first section is used.
+# When now ServerLayout section is present, the first Screen section
+# is used alone.
 
 Section "ServerLayout"
 
-XCOMM The Identifier line must be present
+# The Identifier line must be present
 
     Identifier	"Main Layout"
 
-XCOMM Each Screen line specifies a Screen section name, and optionally
-XCOMM the relative position of other screens.  The four names after
-XCOMM primary screen name are the screens to the top, bottom, left and right
-XCOMM of the primary screen.  In this example, screen 2 is located to the
-XCOMM right of screen 1.
+# Each Screen line specifies a Screen section name, and optionally
+# the relative position of other screens.  The four names after
+# primary screen name are the screens to the top, bottom, left and right
+# of the primary screen.  In this example, screen 2 is located to the
+# right of screen 1.
 
     Screen	"Screen MGA 1"	""	""	""	"Screen MGA 2"
     Screen	"Screen MGA 2"	""	""	"Screen MGA 1"	""
 
-XCOMM Each InputDevice line specifies an InputDevice section name and
-XCOMM optionally some options to specify the way the device is to be
-XCOMM used.  Those options include "CorePointer", "CoreKeyboard" and
-XCOMM "SendCoreEvents".  In this example, "Mouse1" is the core pointer,
-XCOMM and "Mouse2" is an extended input device that also generates core
-XCOMM pointer events (i.e., both mice will move the standard pointer).
+# Each InputDevice line specifies an InputDevice section name and
+# optionally some options to specify the way the device is to be
+# used.  Those options include "CorePointer", "CoreKeyboard" and
+# "SendCoreEvents".  In this example, "Mouse1" is the core pointer,
+# and "Mouse2" is an extended input device that also generates core
+# pointer events (i.e., both mice will move the standard pointer).
 
     InputDevice	"Mouse1" "CorePointer"
     InputDevice	"Mouse2" "SendCoreEvents"