man: sort the options and properties alphabetically

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>

1 files changed, 92 insertions, 92 deletions

diff --git a/man/libinput.man b/man/libinput.man
index 92e181e..36775e6 100644
--- a/man/libinput.man
+++ b/man/libinput.man
@@ -41,15 +41,6 @@ The following driver
 .B Options
 are supported:
 .TP 7
-.BI "Option \*qDevice\*q \*q" string \*q
-Specifies the device through which the device can be accessed.  This will 
-generally be of the form \*q/dev/input/eventX\*q, where X is some integer.
-When using
-.B InputClass
-directives, this option is set by the server.
-The mapping from device node to hardware is system-dependent. Property:
-"Device Node" (read-only).
-.TP 7
 .BI "Option \*qAccelProfile\*q \*q" string \*q
 Sets the pointer acceleration profile to the given profile. Permitted values
 are
@@ -89,6 +80,46 @@ Enables a click method. Permitted values are
 Not all devices support all methods, if an option is unsupported, the
 default click method for this device is used.
 .TP 7
+.BI "Option \*qDisableWhileTyping\*q \*q" bool \*q
+Indicates if the touchpad should be disabled while typing on the keyboard
+(this does not apply to modifier keys such as Ctrl or Alt).
+.TP 7
+.BI "Option \*qDevice\*q \*q" string \*q
+Specifies the device through which the device can be accessed.  This will
+generally be of the form \*q/dev/input/eventX\*q, where X is some integer.
+When using
+.B InputClass
+directives, this option is set by the server.
+The mapping from device node to hardware is system-dependent. Property:
+"Device Node" (read-only).
+.TP 7
+.BI "Option \*qDragLockButtons\*q \*q" "L1 B1 L2 B2 ..." \*q
+Sets "drag lock buttons" that simulate a button logically down even when it has
+been physically released. To logically release a locked button, a second click
+of the same button is required.
+.IP
+If the option is a single button number, that button acts as the
+"meta" locking button for the next button number. See section
+.B BUTTON DRAG LOCK
+for details.
+.IP
+If the option is a list of button number pairs, the first number of each
+number pair is the lock button, the second number the logical button number
+to be locked. See section
+.B BUTTON DRAG LOCK
+for details.
+.IP
+For both meta and button pair configuration, the button numbers are
+device button numbers, i.e. the
+.B ButtonMapping
+applies after drag lock.
+.TP 7
+.BI "Option \*qHorizontalScrolling\*q \*q" bool \*q
+Disables horizontal scrolling. When disabled, this driver will discard any
+horizontal scroll events from libinput. Note that this does not disable
+horizontal scrolling, it merely discards the horizontal axis from any scroll
+events.
+.TP 7
 .BI "Option \*qLeftHanded\*q \*q" bool \*q
 Enables left-handed button orientation, i.e. swapping left and right buttons.
 .TP 7
@@ -99,6 +130,10 @@ buttons simultaneously produces a middle mouse button click.
 .BI "Option \*qNaturalScrolling\*q \*q" bool \*q
 Enables or disables natural scrolling behavior.
 .TP 7
+.BI "Option \*qRotationAngle\*q \*q" float \*q
+Sets the rotation angle of the device to the given angle, in degrees
+clockwise. The angle must be between 0.0 (inclusive) and 360.0 (exclusive).
+.TP 7
 .BI "Option \*qScrollButton\*q \*q" int \*q
 Designates a button as scroll button. If the
 .BI ScrollMethod
@@ -116,20 +151,10 @@ Enables a scroll method. Permitted values are
 Not all devices support all options, if an option is unsupported, the
 default scroll option for this device is used.
 .TP 7
-.BI "Option \*qHorizontalScrolling\*q \*q" bool \*q
-Disables horizontal scrolling. When disabled, this driver will discard any
-horizontal scroll events from libinput. Note that this does not disable
-horizontal scrolling, it merely discards the horizontal axis from any scroll
-events.
-.TP 7
 .BI "Option \*qSendEventsMode\*q \*q" (disabled|enabled|disabled-on-external-mouse) \*q
 Sets the send events mode to disabled, enabled, or "disable when an external
 mouse is connected".
 .TP 7
-.BI "Option \*qRotationAngle\*q \*q" float \*q
-Sets the rotation angle of the device to the given angle, in degrees
-clockwise. The angle must be between 0.0 (inclusive) and 360.0 (exclusive).
-.TP 7
 .BI "Option \*qTapping\*q \*q" bool \*q
 Enables or disables tap-to-click behavior.
 .TP 7
@@ -150,31 +175,6 @@ Enables or disables drag lock during tapping behavior. When enabled, a
 finger up during tap-and-drag will not immediately release the button. If
 the finger is set down again within the timeout, the dragging process
 continues.
-.TP 7
-.BI "Option \*qDisableWhileTyping\*q \*q" bool \*q
-Indicates if the touchpad should be disabled while typing on the keyboard
-(this does not apply to modifier keys such as Ctrl or Alt).
-.TP 7
-.BI "Option \*qDragLockButtons\*q \*q" "L1 B1 L2 B2 ..." \*q
-Sets "drag lock buttons" that simulate a button logically down even when it has
-been physically released. To logically release a locked button, a second click
-of the same button is required.
-.IP
-If the option is a single button number, that button acts as the
-"meta" locking button for the next button number. See section
-.B BUTTON DRAG LOCK
-for details.
-.IP
-If the option is a list of button number pairs, the first number of each
-number pair is the lock button, the second number the logical button number
-to be locked. See section
-.B BUTTON DRAG LOCK
-for details.
-.IP
-For both meta and button pair configuration, the button numbers are
-device button numbers, i.e. the
-.B ButtonMapping
-applies after drag lock.
 .PP
 For all options, the options are only parsed if the device supports that
 configuration option. For all options, the default value is the one used by
@@ -189,40 +189,51 @@ on the device. The following properties are provided by the
 .B libinput
 driver.
 .TP 7
-.BI "libinput Tapping Enabled"
-1 boolean value (8 bit, 0 or 1). 1 enables tapping
-.TP 7
-.BI "libinput Tapping Button Mapping Enabled"
-2 boolean value (8 bit, 0 or 1), in order "lrm" and "lmr". Indicates which
-button mapping is currently enabled on this device.
+.BI "libinput Accel Speed"
+1 32-bit float value, defines the pointer speed. Value range -1, 1
 .TP 7
-.BI "libinput Tapping Drag Lock Enabled"
-1 boolean value (8 bit, 0 or 1). 1 enables drag lock during tapping
+.BI "libinput Button Scrolling Button"
+1 32-bit value. Sets the button number to use for button scrolling. This
+setting is independent of the scroll method, to enable button scrolling the
+method must be set to button-scrolling and a valid button must be set.
 .TP 7
 .BI "libinput Calibration Matrix"
 9 32-bit float values, representing a 3x3 calibration matrix, order is row
 1, row 2, row 3
 .TP 7
-.BI "libinput Accel Speed"
-1 32-bit float value, defines the pointer speed. Value range -1, 1
+.BI "libinput Click Methods Available"
+2 boolean values (8 bit, 0 or 1), in order "buttonareas", "clickfinger".
+Indicates which click methods are available on this device.
 .TP 7
-.BI "libinput Natural Scrolling Enabled"
-1 boolean value (8 bit, 0 or 1). 1 enables natural scrolling
+.BI "libinput Click Methods Enabled"
+2 boolean values (8 bit, 0 or 1), in order "buttonareas", "clickfinger".
+Indicates which click methods are enabled on this device.
 .TP 7
-.BI "libinput Send Events Modes Available"
-2 boolean values (8 bit, 0 or 1), in order "disabled" and
-"disabled-on-external-mouse". Indicates which send-event modes are available
-on this device.
+.BI "libinput Drag Lock Buttons"
+Either one 8-bit value specifying the meta drag lock button, or a list of
+button pairs. See section
+.B BUTTON DRAG LOCK
+for details.
 .TP 7
-.BI "libinput Send Events Mode Enabled"
-2 boolean values (8 bit, 0 or 1), in order "disabled" and
-"disabled-on-external-mouse". Indicates which send-event modes is currently
-enabled on this device.
+.BI "libinput Horizontal Scrolling Enabled"
+1 boolean value (8 bit, 0 or 1). Indicates whether horizontal scrolling
+events are enabled or not.
 .TP 7
 .BI "libinput Left Handed Enabled"
 1 boolean value (8 bit, 0 or 1). Indicates if left-handed mode is enabled or
 disabled.
 .TP 7
+.BI "libinput Middle Emulation Enabled"
+1 boolean value (8 bit, 0 or 1). Indicates if middle emulation is enabled or
+disabled.
+.TP 7
+.BI "libinput Natural Scrolling Enabled"
+1 boolean value (8 bit, 0 or 1). 1 enables natural scrolling
+.TP 7
+.BI "libinput Rotation Angle"
+1 32-bit float value [0.0 to 360.0). Sets the rotation angle of the device,
+clockwise of its natural neutral position.
+.TP 7
 .BI "libinput Scroll Methods Available"
 3 boolean values (8 bit, 0 or 1), in order "two-finger", "edge", "button".
 Indicates which scroll methods are available on this device.
@@ -231,44 +242,33 @@ Indicates which scroll methods are available on this device.
 3 boolean values (8 bit, 0 or 1), in order "two-finger", "edge", "button".
 Indicates which scroll method is currently enabled on this device.
 .TP 7
-.BI "libinput Button Scrolling Button"
-1 32-bit value. Sets the button number to use for button scrolling. This
-setting is independent of the scroll method, to enable button scrolling the
-method must be set to button-scrolling and a valid button must be set.
+.BI "libinput Send Events Modes Available"
+2 boolean values (8 bit, 0 or 1), in order "disabled" and
+"disabled-on-external-mouse". Indicates which send-event modes are available
+on this device.
 .TP 7
-.BI "libinput Click Methods Available"
-2 boolean values (8 bit, 0 or 1), in order "buttonareas", "clickfinger".
-Indicates which click methods are available on this device.
+.BI "libinput Send Events Mode Enabled"
+2 boolean values (8 bit, 0 or 1), in order "disabled" and
+"disabled-on-external-mouse". Indicates which send-event modes is currently
+enabled on this device.
 .TP 7
-.BI "libinput Click Methods Enabled"
-2 boolean values (8 bit, 0 or 1), in order "buttonareas", "clickfinger".
-Indicates which click methods are enabled on this device.
+.BI "libinput Tapping Enabled"
+1 boolean value (8 bit, 0 or 1). 1 enables tapping
 .TP 7
-.BI "libinput Middle Emulation Enabled"
-1 boolean value (8 bit, 0 or 1). Indicates if middle emulation is enabled or
-disabled.
+.BI "libinput Tapping Button Mapping Enabled"
+2 boolean value (8 bit, 0 or 1), in order "lrm" and "lmr". Indicates which
+button mapping is currently enabled on this device.
+.TP 7
+.BI "libinput Tapping Drag Lock Enabled"
+1 boolean value (8 bit, 0 or 1). 1 enables drag lock during tapping
 .TP 7
 .BI "libinput Disable While Typing Enabled"
 1 boolean value (8 bit, 0 or 1). Indicates if disable while typing is
 enabled or disabled.
-.TP 7
-.BI "libinput Rotation Angle"
-1 32-bit float value [0.0 to 360.0). Sets the rotation angle of the device,
-clockwise of its natural neutral position.
 .PP
-The above properties have a
+Most properties have a
 .BI "libinput <property name> Default"
 equivalent that indicates the default value for this setting on this device.
-.TP 7
-.BI "libinput Drag Lock Buttons"
-Either one 8-bit value specifying the meta drag lock button, or a list of
-button pairs. See section
-.B BUTTON DRAG LOCK
-for details.
-.TP 7
-.BI "libinput Horizontal Scrolling Enabled"
-1 boolean value (8 bit, 0 or 1). Indicates whether horizontal scrolling
-events are enabled or not.
 
 .SH BUTTON MAPPING
 X clients receive events with logical button numbers, where 1, 2, 3