diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/elo.c | 903 | ||||
| -rw-r--r-- | src/elo.h | 147 |
2 files changed, 1050 insertions, 0 deletions
diff --git a/src/elo.c b/src/elo.c new file mode 100644 index 0000000..e125c1b --- /dev/null +++ b/src/elo.c @@ -0,0 +1,903 @@ +/* + * Copyright (c) 1998 Metro Link Incorporated + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, cpy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF + * OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + * Except as contained in this notice, the name of the Metro Link shall not be + * used in advertising or otherwise to promote the sale, use or other dealings + * in this Software without prior written authorization from Metro Link. + * + */ +/* + * Based, in part, on code with the following copyright notice: + * + * Copyright 1995 by Patrick Lecoanet, France. <lecoanet@cenaath.cena.dgac.fr> + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that + * copyright notice and this permission notice appear in supporting + * documentation, and that the name of Patrick Lecoanet not be used in + * advertising or publicity pertaining to distribution of the software without + * specific, written prior permission. Patrick Lecoanet makes no + * representations about the suitability of this software for any purpose. It + * is provided "as is" without express or implied warranty. + * + * PATRICK LECOANET DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL PATRICK LECOANET BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR + * PERFORMANCE OF THIS SOFTWARE. + * + */ +/* $XFree86: xc/programs/Xserver/hw/xfree86/input/elo2300/elo.c,v 1.11 2001/11/26 16:25:53 dawes Exp $ */ + +#define _elo_C_ +/***************************************************************************** + * Standard Headers + ****************************************************************************/ + +#include <misc.h> +#include <xf86.h> +#define NEED_XF86_TYPES +#include <xf86_ansic.h> +#include <xf86_OSproc.h> +#include <xf86Xinput.h> +#include <xisb.h> +#include <exevents.h> /* Needed for InitValuator/Proximity stuff */ + +/***************************************************************************** + * Local Headers + ****************************************************************************/ +#include "elo.h" + +/***************************************************************************** + * Variables without includable headers + ****************************************************************************/ + +/***************************************************************************** + * Local Variables + ****************************************************************************/ +static XF86ModuleVersionInfo VersionRec = +{ + "elo2300", + MODULEVENDORSTRING, + MODINFOSTRING1, + MODINFOSTRING2, + XF86_VERSION_CURRENT, + 1, 0, 0, + ABI_CLASS_XINPUT, + ABI_XINPUT_VERSION, + MOD_CLASS_XINPUT, + {0, 0, 0, 0} /* signature, to be patched into the file by + * a tool */ +}; + +static const char *default_options[] = +{ + "BaudRate", "9600", + "StopBits", "1", + "DataBits", "8", + "Parity", "None", + "Vmin", "10", + "Vtime", "1", + "FlowControl", "None" +}; + +XF86ModuleData elo2300ModuleData = { &VersionRec, SetupProc, TearDownProc }; + +/***************************************************************************** + * Function Definitions + ****************************************************************************/ + +static void +TearDownProc( pointer p ) +{ + LocalDevicePtr local = (LocalDevicePtr) p; + EloPrivatePtr priv = (EloPrivatePtr) local->private; + + DeviceOff (local->dev); + + xf86CloseSerial (local->fd); + XisbFree (priv->buffer); + xfree (priv); + xfree (local->name); + xfree (local); +} + +static pointer +SetupProc( pointer module, + pointer options, + int *errmaj, + int *errmin ) +{ + LocalDevicePtr local = xcalloc (1, sizeof (LocalDeviceRec)); + EloPrivatePtr priv = xcalloc (1, sizeof (EloPrivateRec)); + pointer defaults, + merged; + char *s; + + + if ((!local) || (!priv)) + goto SetupProc_fail; + + defaults = xf86OptionListCreate( default_options, + (sizeof (default_options) / sizeof (default_options[0])), 0); + + merged = xf86OptionListMerge( defaults, options ); + + xf86OptionListReport( merged ); + + local->fd = xf86OpenSerial (merged); + if (local->fd == -1) + { + xf86ErrorF ("ELO 2300 driver unable to open device\n"); + *errmaj = LDR_NOPORTOPEN; + *errmin = xf86GetErrno (); + goto SetupProc_fail; + } + xf86ErrorFVerb( 6, "tty port opened successfully\n" ); + + priv->min_x = xf86SetIntOption( merged, "MinX", 0 ); + priv->max_x = xf86SetIntOption( merged, "MaxX", 1000 ); + priv->min_y = xf86SetIntOption( merged, "MinY", 0 ); + priv->max_y = xf86SetIntOption( merged, "MaxY", 1000 ); + priv->untouch_delay = xf86SetIntOption( merged, "UntouchDelay", ELO_UNTOUCH_DELAY ); + priv->report_delay = xf86SetIntOption( merged, "ReportDelay", ELO_REPORT_DELAY ); + priv->screen_num = xf86SetIntOption( merged, "ScreenNumber", 0 ); + priv->button_number = xf86SetIntOption( merged, "ButtonNumber", 1 ); + priv->button_threshold = xf86SetIntOption( merged, "ButtonThreshold", 128 ); + + s = xf86FindOptionValue (merged, "ReportingMode"); + if ((s) && (xf86NameCmp (s, "raw") == 0)) + priv->reporting_mode = TS_Raw; + else + priv->reporting_mode = TS_Scaled; + + priv->buffer = XisbNew (local->fd, 200); + priv->button_down = FALSE; + + DBG (9, XisbTrace (priv->buffer, 1)); + + EloNewPacket (priv); + if (QueryHardware (priv, errmaj, errmin) != Success) + { + xf86ErrorF ("Unable to query/initialize Elographics 2300 hardware.\n"); + goto SetupProc_fail; + } + + /* this results in an xstrdup that must be freed later */ + local->name = xf86SetStrOption( merged, "DeviceName", "ELOGraphics 2300 TouchScreen" ); + local->type_name = XI_TOUCHSCREEN; + local->device_control = DeviceControl; + local->read_input = ReadInput; + local->control_proc = ControlProc; + local->close_proc = CloseProc; + local->switch_mode = SwitchMode; + local->conversion_proc = ConvertProc; + local->dev = NULL; + local->private = priv; + local->private_flags = 0; + local->history_size = xf86SetIntOption( merged, "HistorySize", 0 ); + + xf86AddLocalDevice (local, merged); + + /* prepare to process touch packets */ + EloNewPacket (priv); + return (local); + + SetupProc_fail: + if ((local) && (local->fd)) + xf86CloseSerial (local->fd); + if ((local) && (local->name)) + xfree (local->name); + + if ((priv) && (priv->buffer)) + XisbFree (priv->buffer); + if (priv) + xfree (priv); + return (local); +} + +static Bool +DeviceControl( DeviceIntPtr dev, + int mode ) +{ + Bool RetValue; + + switch (mode) + { + case DEVICE_INIT: + DeviceInit (dev); + RetValue = Success; + break; + case DEVICE_ON: + RetValue = DeviceOn( dev ); + break; + case DEVICE_OFF: + RetValue = DeviceOff( dev ); + break; + case DEVICE_CLOSE: + RetValue = DeviceClose( dev ); + break; + default: + RetValue = BadValue; + } + + return( RetValue ); +} + +static Bool +DeviceOn( DeviceIntPtr dev ) +{ + LocalDevicePtr local = (LocalDevicePtr) dev->public.devicePrivate; + + AddEnabledDevice (local->fd); + dev->public.on = TRUE; + return (Success); +} + +static Bool +DeviceOff( DeviceIntPtr dev ) +{ + LocalDevicePtr local = (LocalDevicePtr) dev->public.devicePrivate; + + RemoveEnabledDevice (local->fd); + dev->public.on = FALSE; + return (Success); +} + +static Bool +DeviceClose( DeviceIntPtr dev ) +{ + return (Success); +} + +static Bool +DeviceInit( DeviceIntPtr dev ) +{ + LocalDevicePtr local = (LocalDevicePtr) dev->public.devicePrivate; + EloPrivatePtr priv = (EloPrivatePtr) (local->private); + unsigned char map[] = + {0, 1}; + + /* + * these have to be here instead of in the SetupProc, because when the + * SetupProc is run and server startup, screenInfo is not setup yet + */ + priv->screen_width = screenInfo.screens[priv->screen_num]->width; + priv->screen_height = screenInfo.screens[priv->screen_num]->height; + + /* + * Device reports button press for up to 1 button. + */ + if (InitButtonClassDeviceStruct (dev, 1, map) == FALSE) + { + ErrorF ("Unable to allocate Elographics touchscreen ButtonClassDeviceStruct\n"); + return !Success; + } + + /* + * Device reports motions on 2 axes in absolute coordinates. + * Device may reports touch pressure on the 3rd axis. + */ + if (InitValuatorClassDeviceStruct (dev, priv->axes, xf86GetMotionEvents, + local->history_size, Absolute) == FALSE) + { + ErrorF ("Unable to allocate Elographics touchscreen ValuatorClassDeviceStruct\n"); + return !Success; + } + else + { + InitValuatorAxisStruct (dev, 0, priv->min_x, priv->max_x, + 9500, + 0 /* min_res */ , + 9500 /* max_res */ ); + InitValuatorAxisStruct (dev, 1, priv->min_y, priv->max_y, + 10500, + 0 /* min_res */ , + 10500 /* max_res */ ); + /* 3rd axis is pressure */ + if (priv->axes == 3) + { + InitValuatorAxisStruct (dev, 2, 0, 255, + 255, + 0 /* min_res */ , + 255 /* max_res */ ); + } + } + + if (InitProximityClassDeviceStruct (dev) == FALSE) + { + ErrorF ("Unable to allocate Elographics touchscreen ProximityClassDeviceStruct\n"); + return !Success; + } + + /* + * Allocate the motion events buffer. + */ + xf86MotionHistoryAllocate (local); + return (Success); +} + +static void +ReadInput( LocalDevicePtr local ) +{ + int x, y, z; + int state; + EloPrivatePtr priv = (EloPrivatePtr) (local->private); + + /* + * set blocking to -1 on the first call because we know there is data to + * read. Xisb automatically clears it after one successful read so that + * succeeding reads are preceeded buy a select with a 0 timeout to prevent + * read from blocking indefinately. + */ + XisbBlockDuration (priv->buffer, -1); + while (EloGetPacket (priv) == Success) + { + if (priv->packet[1] == ELO_TOUCH) + { + x = WORD_ASSEMBLY (priv->packet[3], priv->packet[4]); + y = WORD_ASSEMBLY (priv->packet[5], priv->packet[6]); + z = WORD_ASSEMBLY (priv->packet[7], priv->packet[8]); + state = priv->packet[2] & 0x07; + + if (priv->reporting_mode == TS_Scaled) + { + x = xf86ScaleAxis (x, 0, priv->screen_width, priv->min_x, + priv->max_x); + y = xf86ScaleAxis (y, 0, priv->screen_height, priv->min_y, + priv->max_y); + } + xf86XInputSetScreen (local, priv->screen_num, x, y); + if (state == ELO_PRESS) + { + if (priv->axes == 3) + xf86PostProximityEvent (local->dev, 1, 0, 3, x, y, z); + else + xf86PostProximityEvent (local->dev, 1, 0, 2, x, y); + } + + /* + * Send events. + * + * We *must* generate a motion before a button change if pointer + * location has changed as DIX assumes this. This is why we always + * emit a motion, regardless of the kind of packet processed. + */ + if (priv->axes == 3) + xf86PostMotionEvent (local->dev, TRUE, 0, 3, x, y, z); + else + xf86PostMotionEvent (local->dev, TRUE, 0, 2, x, y); + + /* + * Emit a button press or release. + */ + if ((z > priv->button_threshold) && (!priv->button_down)) + { + if (priv->axes == 3) + { + xf86PostButtonEvent (local->dev, TRUE, + priv->button_number, 1, 0, 3, x, y, z); + } + else + { + xf86PostButtonEvent (local->dev, TRUE, + priv->button_number, 1, 0, 2, x, y); + } + priv->button_down = TRUE; + } + /* + * if button_threshold is 0, there may never be a STREAMING + * event with a z <= 0 before there is an untouch (RELEASE) + * event + */ + if (((z <= priv->button_threshold) || (state == ELO_RELEASE)) + && (priv->button_down)) + { + if (priv->axes == 3) + { + xf86PostButtonEvent (local->dev, TRUE, + priv->button_number, 0, 0, 3, x, y, z); + } + else + { + xf86PostButtonEvent (local->dev, TRUE, + priv->button_number, 0, 0, 2, x, y); + } + priv->button_down = FALSE; + } + /* + * the untouch should always come after the button release + */ + if (state == ELO_RELEASE) + { + if (priv->axes == 3) + xf86PostProximityEvent (local->dev, 0, 0, 3, x, y, z); + else + xf86PostProximityEvent (local->dev, 0, 0, 2, x, y); + } + + xf86ErrorFVerb (3, "TouchScreen: x(%d), y(%d), %s\n", + x, y, + (state == ELO_PRESS) ? "Press" : + ((state == ELO_RELEASE) ? "Release" : "Stream")); + } + } +} + +static int +ControlProc( LocalDevicePtr local, + xDeviceCtl * control ) +{ + xDeviceTSCalibrationCtl *c = (xDeviceTSCalibrationCtl *) control; + EloPrivatePtr priv = (EloPrivatePtr) (local->private); + + priv->min_x = c->min_x; + priv->max_x = c->max_x; + priv->min_y = c->min_y; + priv->max_y = c->max_y; + /* + * if we have real Z values, set the threshold, otherwise stick with + * the built-in default. + */ + if (priv->axes == 3) + priv->button_threshold = c->button_threshold; + return (Success); +} + +static void +CloseProc( LocalDevicePtr local ) +{ +} + +static int +SwitchMode( ClientPtr client, + DeviceIntPtr dev, + int mode ) +{ + LocalDevicePtr local = (LocalDevicePtr) dev->public.devicePrivate; + EloPrivatePtr priv = (EloPrivatePtr) (local->private); + if ((mode == TS_Raw) || (mode == TS_Scaled)) + { + priv->reporting_mode = mode; + return (Success); + } + else if ((mode == SendCoreEvents) || (mode == DontSendCoreEvents)) + { + xf86XInputSetSendCoreEvents (local, (mode == SendCoreEvents)); + return (Success); + } + else + return (!Success); +} + +static Bool +ConvertProc( LocalDevicePtr local, + int first, + int num, + int v0, + int v1, + int v2, + int v3, + int v4, + int v5, + int *x, + int *y ) +{ + EloPrivatePtr priv = (EloPrivatePtr) (local->private); + + if (priv->reporting_mode == TS_Raw) + { + *x = xf86ScaleAxis (v0, 0, priv->screen_width, priv->min_x, + priv->max_x); + *y = xf86ScaleAxis (v1, 0, priv->screen_height, priv->min_y, + priv->max_y); + } + else + { + *x = v0; + *y = v1; + } + return (TRUE); +} + +static Bool +QueryHardware( EloPrivatePtr priv, + int *errmaj, + int *errmin ) +{ + unsigned char req[ELO_PACKET_SIZE]; + + memset (req, 0, ELO_PACKET_SIZE); + req[1] = tolower (ELO_ID); + if (EloSendQuery (req, priv) == Success) + { + /* + * indicates hardware reports actual z (pressure) values + */ + if (priv->packet[4] & 0x80) + priv->axes = 3; + else + priv->axes = 2; + + EloPrintIdent( priv->packet ); + if (EloWaitAck (priv) != Success) + { + *errmaj = LDR_NOHARDWARE; + return (!Success); + } + } + else + { + *errmaj = LDR_NOHARDWARE; + return (!Success); + } + /* + * Set the operating mode: Stream, no scaling, no calibration, + * no range checking, no trim, tracking enabled. + */ + memset (req, 0, ELO_PACKET_SIZE); + req[1] = ELO_MODE; + req[3] = ELO_TOUCH_MODE | ELO_STREAM_MODE | ELO_UNTOUCH_MODE | + ELO_ENABLE_Z_MODE; + req[4] = ELO_TRACKING_MODE; + if (EloSendControl (req, priv) != Success) + { + ErrorF ("Unable to change Elographics touchscreen modes\n"); + *errmaj = LDR_NOHARDWARE; + return (!Success); + } + + /* + * Set the touch reports timings from configuration data. + */ + memset (req, 0, ELO_PACKET_SIZE); + req[1] = ELO_REPORT; + req[2] = priv->untouch_delay; + req[3] = priv->report_delay; + if (EloSendControl (req, priv) != Success) + { + ErrorF ("Unable to change Elographics touchscreen reports timings\n"); + *errmaj = LDR_NOHARDWARE; + return (!Success); + + } + return (Success); +} + +/* + *************************************************************************** + * + * EloSendControl -- + * Emit a control command to the controller and wait for acknowledge. + * + * Returns Success if acknowledge received and reported no error. + * + *************************************************************************** + */ +static Bool +EloSendControl( unsigned char *control, + EloPrivatePtr priv ) +{ + if (EloSendPacket (control, priv->buffer) == Success) + { + return EloWaitAck (priv); + } + else + return !Success; +} + +/* + *************************************************************************** + * + * EloSendQuery -- + * Emit a query to the controller and blocks until the reply and + * the acknowledge are read. + * + * The reply is left in reply. The function returns Success if the + * reply is valid and !Success otherwise. + * + *************************************************************************** + */ +static Bool +EloSendQuery( unsigned char *request, + EloPrivatePtr priv ) +{ + Bool ok; + + if (EloSendPacket (request, priv->buffer) == Success) + { + ok = EloWaitReply (toupper (request[1]), priv); + return ok; + } + else + return !Success; +} + +/* + *************************************************************************** + * + * EloSendPacket -- + * Emit an height bytes packet to the controller. + * The function expects a valid buffer containing the + * command to be sent to the controller. It fills it with the + * leading sync character an the trailing checksum byte. + * + *************************************************************************** + */ +static Bool +EloSendPacket( unsigned char *packet, + XISBuffer * b ) +{ + int i, result; + int sum = ELO_INIT_CHECKSUM; + + packet[0] = ELO_SYNC_BYTE; + for (i = 0; i < ELO_PACKET_SIZE - 1; i++) + { + sum += packet[i]; + sum &= 0xFF; + } + packet[ELO_PACKET_SIZE - 1] = sum; + + result = XisbWrite (b, packet, ELO_PACKET_SIZE); + if (result != ELO_PACKET_SIZE) + { + ErrorF ("System error while sending to Elographics touchscreen.\n"); + return !Success; + } + else + return Success; +} + +/* + *************************************************************************** + * + * EloWaitReply -- + * It is assumed that the reply will be in the few next bytes + * read and will be available very soon after the query post. if + * these two asumptions are not met, there are chances that the server + * will be stuck for a while. + * The reply type need to match parameter 'type'. + * The reply is left in reply. The function returns Success if the + * reply is valid and !Success otherwise. + * + *************************************************************************** + */ + +static Bool +EloWaitReply( unsigned char type, + EloPrivatePtr priv ) +{ + Bool ok; + int wrong, empty; + + xf86ErrorFVerb( 4, "Waiting for a '%c' reply\n", type ); + wrong = ELO_MAX_WRONG_PACKETS; + empty = ELO_MAX_EMPTY_PACKETS; + do + { + ok = !Success; + + /* + * Wait half a second for the reply. The fuse counts down each + * timeout and each wrong packet. + */ + xf86ErrorFVerb( 4, "Waiting %d ms for data from port\n", + ELO_MAX_WAIT / 1000 ); + EloNewPacket (priv); + XisbBlockDuration (priv->buffer, ELO_MAX_WAIT); + ok = EloGetPacket (priv); + if (ok != Success) + empty--; + if ((ok == Success) && (priv->packet[1] != type)) + { + xf86ErrorFVerb( 2, "Wrong reply received\n" ); + ok = !Success; + wrong--; + } + } + while (ok != Success && wrong && empty); + + return ok; +} +/* + * prepare to read a new packet regardless of the state of the packet in + * progress + */ +static void +EloNewPacket( EloPrivatePtr priv ) +{ + priv->packeti = 0; + priv->lex_mode = elo_normal; + priv->checksum = 0; +} + +/* + *************************************************************************** + * + * EloGetPacket -- + * Read a packet from the port. Try to synchronize with start of + * packet and compute checksum. + * The packet structure read by this function is as follow: + * Byte 0 : ELO_SYNC_BYTE + * Byte 1 + * ... + * Byte 8 : packet data + * Byte 9 : checksum of bytes 0 to 8 + * + * This function returns if a valid packet has been assembled in + * buffer or if no more data is available. + * + * Returns Success if a packet is successfully assembled including + * testing checksum. If a packet checksum is incorrect, it is discarded. + * Bytes preceding the ELO_SYNC_BYTE are also discarded. + * Returns !Success if out of data while reading. The start of the + * partially assembled packet is left in packet, buffer_p and + * checksum reflect the current state of assembly. + * + *************************************************************************** + */ +static Bool +EloGetPacket( EloPrivatePtr priv ) +{ + int count = 0; + int c; + + while ((c = XisbRead (priv->buffer)) >= 0) + { + if (priv->lex_mode != elo_checksum) + priv->checksum += c; + if (count++ > 50) + { + EloNewPacket (priv); + return (!Success); + } + + switch (priv->lex_mode) + { + case elo_normal: + if (c == ELO_SYNC_BYTE) + { + priv->packet[priv->packeti++] = (unsigned char) c; + priv->checksum = ELO_INIT_CHECKSUM + c; + priv->lex_mode = elo_body; + } + break; + + case elo_body: + if (priv->packeti < 9) + priv->packet[priv->packeti++] = (unsigned char) c; + if (priv->packeti == 9) + priv->lex_mode = elo_checksum; + break; + + case elo_checksum: + + if (c != priv->checksum) + { + xf86ErrorFVerb( 4, "Checksum mismatch. Read %d calculated %d\nPacket discarded.\n", + c, priv->checksum ); + EloNewPacket (priv); + } + else + { + EloNewPacket (priv); + xf86ErrorFVerb( 5, "got a good packet from ELO touchscreen\n" ); + return (Success); + } + break; + } + } + return (!Success); +} + +/* + *************************************************************************** + * + * EloWaitAck -- + * Wait for an acknowledge from the controller. Returns Success if + * acknowledge received and reported no errors. + * + *************************************************************************** + */ +static Bool +EloWaitAck( EloPrivatePtr priv ) +{ + int i, nb_errors; + + if (EloWaitReply (ELO_ACK, priv) == Success) + { + for (i = 0, nb_errors = 0; i < 4; i++) + if (priv->packet[2 + i] != '0') + nb_errors++; + if (nb_errors != 0) + { + xf86ErrorFVerb( 2, "Elographics acknowledge packet reports %d errors\n", + nb_errors ); + } + return Success; + /* return (nb_errors < 4) ? Success : !Success; */ + } + else + return !Success; +} + +/* + *************************************************************************** + * + * EloPrintIdent -- + * Print type of touchscreen and features on controller board. + * + *************************************************************************** + */ +static void +EloPrintIdent( unsigned char *packet ) +{ + xf86Msg( X_PROBED, " Elographics touchscreen is a " ); + switch (packet[2]) + { + case '0': + xf86ErrorF( "AccuTouch" ); + break; + case '1': + xf86ErrorF( "DuraTouch" ); + break; + case '2': + xf86ErrorF( "Intellitouch" ); + break; + } + xf86ErrorF( ", connected through a " ); + switch (packet[3]) + { + case '0': + xf86ErrorF( "serial link.\n" ); + break; + case '1': + xf86ErrorF( "ISA-Bus card.\n" ); + break; + case '2': + xf86ErrorF( "Micro Channel card.\n"); + break; + } + xf86Msg( X_PROBED, " The controller is a model " ); + if (packet[8] & 1) + xf86ErrorF( "E271-2210" ); + else + xf86ErrorF( "E271-2200" ); + xf86ErrorF( ", firmware revision %d.%d.\n", packet[6], packet[5] ); + + if( packet[4] ) + { + xf86Msg( X_PROBED, " Additional features:\n" ); + if (packet[4] & 0x10) + xf86Msg( X_PROBED, " External A/D converter\n" ); + if (packet[4] & 0x20) + xf86Msg( X_PROBED, " 32K RAM\n" ); + if (packet[4] & 0x40) + xf86Msg( X_PROBED, " RAM onboard\n" ); + if (packet[4] & 0x80) + xf86Msg( X_PROBED, " Z axis active\n" ); + xf86ErrorF( "\n" ); + } +} diff --git a/src/elo.h b/src/elo.h new file mode 100644 index 0000000..dcdd6ff --- /dev/null +++ b/src/elo.h @@ -0,0 +1,147 @@ +/* + * Copyright (c) 1998 Metro Link Incorporated + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF + * OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + * Except as contained in this notice, the name of the Metro Link shall not be + * used in advertising or otherwise to promote the sale, use or other dealings + * in this Software without prior written authorization from Metro Link. + * + */ +/* $XFree86: xc/programs/Xserver/hw/xfree86/input/elo2300/elo.h,v 1.2 1999/02/01 12:12:59 dawes Exp $ */ + +#ifndef _elo_H_ +#define _elo_H_ + +/****************************************************************************** + * Definitions + * structs, typedefs, #defines, enums + *****************************************************************************/ +#define ELO_PACKET_SIZE 10 + + /* Note: some of them are not supported by the E281-2310 *//* JPM */ + +#define ELO_SYNC_BYTE 'U' /* Sync byte. First of a packet. */ +#define ELO_TOUCH 'T' /* Report of touchs and motions. */ +#define ELO_OWNER 'O' /* Report vendor name. */ +#define ELO_ID 'I' /* Report of type and features. */ +#define ELO_MODE 'M' /* Set current operating mode. */ +#define ELO_PARAMETER 'P' /* Set the serial parameters. */ +#define ELO_REPORT 'B' /* Set touch reports timings. */ +#define ELO_CALIBRATION 'C' /* Calibration command. */ +#define ELO_ACK 'A' /* Acknowledge packet */ +#define ELO_SERIAL_IO '0' /* Indicator byte for PARAMETER command */ + +#define ELO_INIT_CHECKSUM 0xAA /* Initial value of checksum. */ + +#define ELO_PRESS 0x01 /* Flags in ELO_TOUCH status byte */ +#define ELO_STREAM 0x02 +#define ELO_RELEASE 0x04 + +#define ELO_TOUCH_MODE 0x01 /* Flags in ELO_MODE command */ +#define ELO_STREAM_MODE 0x02 +#define ELO_UNTOUCH_MODE 0x04 +#define ELO_RANGE_CHECK_MODE 0x40 +#define ELO_ENABLE_Z_MODE 0x80 +#define ELO_TRIM_MODE 0x02 +#define ELO_CALIB_MODE 0x04 +#define ELO_SCALING_MODE 0x08 +#define ELO_TRACKING_MODE 0x40 + +#define ELO_SERIAL_SPEED 0x06 /* Flags for high speed serial + * (19200) */ +#define ELO_SERIAL_MASK 0xF8 + +#define ELO_MAX_WRONG_PACKETS 200 /* Number of wrong packets to accept + * before giving up when looking for + * a specific packet type */ +#define ELO_MAX_EMPTY_PACKETS 3 /* Number of empty reads to accept before + * giving up when looking for a reply */ +#define ELO_MAX_WAIT 100000 /* Max wait time for a reply (microsec) */ + +#define ELO_UNTOUCH_DELAY 10 /* 100 ms */ +#define ELO_REPORT_DELAY 4 /* 40 ms or 25 motion reports/s */ + +typedef enum +{ + elo_normal, elo_body, elo_checksum +} +ELOState; + +#define WORD_ASSEMBLY(byte1, byte2) (((byte2) << 8) | (byte1)) + +typedef struct _EloPrivateRec +{ + int min_x; /* Minimum x reported by calibration */ + int max_x; /* Maximum x */ + int min_y; /* Minimum y reported by calibration */ + int max_y; /* Maximum y */ + int button_threshold; /* Z > button threshold = button click */ + int axes; + Bool button_down; /* is the "button" currently down */ + int button_number; /* which button to report */ + int reporting_mode; /* TS_Raw or TS_Scaled */ + + int untouch_delay; /* Delay before reporting an untouch (in ms) */ + int report_delay; /* Delay between touch report packets */ + + int screen_num; /* Screen associated with the device */ + int screen_width; /* Width of the associated X screen */ + int screen_height; /* Height of the screen */ + XISBuffer *buffer; + unsigned char packet[ELO_PACKET_SIZE]; /* packet being/just read */ + int packeti; /* index into packet */ + unsigned char checksum; /* Current checksum of data in assembly * + * buffer */ + ELOState lex_mode; +} +EloPrivateRec, *EloPrivatePtr; + +/****************************************************************************** + * Declarations + * variables: use elo_LOC in front + * of globals. + * put locals in the .c file. + *****************************************************************************/ +static MODULESETUPPROTO( SetupProc ); +static void TearDownProc (pointer p); +static Bool DeviceControl (DeviceIntPtr dev, int mode); +static Bool DeviceOn (DeviceIntPtr dev); +static Bool DeviceOff (DeviceIntPtr dev); +static Bool DeviceClose (DeviceIntPtr dev); +static Bool DeviceInit (DeviceIntPtr dev); +static void ReadInput (LocalDevicePtr local); +static int ControlProc (LocalDevicePtr local, xDeviceCtl * control); +static void CloseProc (LocalDevicePtr local); +static int SwitchMode (ClientPtr client, DeviceIntPtr dev, int mode); +static Bool ConvertProc (LocalDevicePtr local, int first, int num, int v0, int v1, int v2, int v3, int v4, int v5, int *x, int *y); +static Bool QueryHardware (EloPrivatePtr priv, int *errmaj, int *errmin); +static Bool EloSendControl (unsigned char *control, EloPrivatePtr priv); +static Bool EloSendQuery (unsigned char *request, EloPrivatePtr priv); +static Bool EloSendPacket (unsigned char *packet, XISBuffer * b); +static Bool EloWaitReply (unsigned char type, EloPrivatePtr priv); +static void EloNewPacket (EloPrivatePtr priv); +static Bool EloGetPacket (EloPrivatePtr priv); +static Bool EloWaitAck (EloPrivatePtr priv); +static void EloPrintIdent (unsigned char *packet); + +/* + * DO NOT PUT ANYTHING AFTER THIS ENDIF + */ +#endif |