Remove NetBSD & OpenBSD platform docs

Matthieu Herrb explains:

"I would rather remove this document (and its brother NetBSD.xml)
completely. It was written for times where XFree86 was not yet
included in OpenBSD binary distributions and people had to download,
build and install it by themselve.

Now (well it's been more than 10 years) that X is included with
OpenBSD distributions, this document is mostly and contains many
other out of date information."

Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>

3 files changed, 0 insertions, 1266 deletions

diff --git a/general/platforms/Makefile.am b/general/platforms/Makefile.am
index eeab5dc..cd936bb 100644
--- a/general/platforms/Makefile.am
+++ b/general/platforms/Makefile.am
@@ -2,8 +2,6 @@
 
 doc_sources = \
 	Darwin.xml \
-	NetBSD.xml \
-	OpenBSD.xml \
 	Solaris.xml
 
 xmldir = $(docdir)/platforms
diff --git a/general/platforms/NetBSD.xml b/general/platforms/NetBSD.xml
deleted file mode 100644
index 92fa212..0000000
--- a/general/platforms/NetBSD.xml
+++ /dev/null
@@ -1,801 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
-                      "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd"
-[
-<!ENTITY % defs SYSTEM "/xorg-sgml-doctools/X11/defs.ent"> %defs;
-]>
-
-<article>
-
-<articleinfo>
-
-<title>README for X11R&relvers; on NetBSD</title>
-<author><firstname>Rich</firstname><surname>Murphey</surname></author>
-<author><firstname>David</firstname><surname>Dawes</surname></author>
-<author><firstname>Marc</firstname><surname>Wandschneider</surname></author>
-<author><firstname>Mark</firstname><surname>Weaver</surname></author>
-<author><firstname>Matthieu</firstname><surname>Herrb</surname></author>
-</articleinfo>
-
-<sect1>
-<title>What and Where is X11R&relvers;?</title>
-
-<para>
-X11R&relvers; is an Open Source version of the X Window System that supports
-several UNIX(R) and UNIX-like operating systems (such as Linux, the BSDs
-and Solaris x86) on Intel and other platforms.  This version is compatible
-with X11R6.6, and is based on the XFree86 4.4.0RC2 code base, which,
-in turn was based on the X consortium sample implementation.
-</para>
-
-<para>
-See the <ulink url="../License.html">Copyright Notice</ulink>.
-</para>
-
-<para>
-The sources for X11R&relvers; are available from:
-</para>
-
-<para>
-<ulink url="http://wiki.x.org">http://wiki.x.org</ulink>
-</para>
-
-<para>
-X11R&relvers; also builds on other NetBSD architectures. See section
-<xref linkend="otherarchs" /> for details.
-</para>
-
-</sect1>
-
-<sect1>
-<title>New OS dependent features</title>
-
-<para>
-See the <ulink url="../ReleaseNotes.html">Release Notes</ulink> for
-non-OS dependent new features in X11R&relvers;.
-</para>
-
-<sect2>
-<title>New OS dependent features in XFree86 4.2.0</title>
-
-<para>
-
-<itemizedlist>
-<listitem>
-
-<para>
-Support of client side on NetBSD/sparc64
-</para>
-</listitem>
-<listitem>
-
-<para>
-Support for in-kernel MTRR and AGP support in NetBSD 1.5Y
-</para>
-</listitem>
-
-</itemizedlist>
-
-</para>
-
-</sect2>
-
-<sect2>
-<title>New OS dependent features in XFree86 4.1.0</title>
-
-<para>
-
-<itemizedlist>
-<listitem>
-
-<para>
-Enable wide characters support in NetBSD 1.5P and later.
-</para>
-</listitem>
-
-</itemizedlist>
-
-</para>
-
-</sect2>
-
-<sect2>
-<title>New OS dependent features in XFree86 4.0.2</title>
-
-<para>
-
-<itemizedlist>
-<listitem>
-
-<para>
-A fix for libXmu OS detection which was broken since <symbol>unix</symbol>
-isn't defined anymore by the C preprocessor.
-</para>
-</listitem>
-<listitem>
-
-<para>
-(limited) native wscons support. This is not activated by
-default.
-</para>
-</listitem>
-<listitem>
-
-<para>
-Updates to the aperture driver
-</para>
-</listitem>
-<listitem>
-
-<para>
-Support for multithread libraries with GNU pth
-</para>
-</listitem>
-<listitem>
-
-<para>
-Add <filename>/usr/pkg/bin</filename> to the default user path.
-</para>
-</listitem>
-
-</itemizedlist>
-
-</para>
-
-</sect2>
-
-<sect2>
-<title>New OS dependent features in XFree86 4.0.1</title>
-
-<para>
-
-<itemizedlist>
-<listitem>
-
-<para>
-Support for NetBSD 1.5&lowbar;ALPHA
-</para>
-</listitem>
-<listitem>
-
-<para>
-The Xsun server can be built on NetBSD/sparc
-</para>
-</listitem>
-
-</itemizedlist>
-
-</para>
-
-</sect2>
-
-<sect2>
-<title>New OS dependent features in XFree86 4.0</title>
-
-<para>
-
-<itemizedlist>
-<listitem>
-
-<para>
-Preliminary APM support.
-</para>
-</listitem>
-
-</itemizedlist>
-
-</para>
-
-</sect2>
-
-<sect2>
-<title>New OS dependent features in XFree86 3.9.18</title>
-
-<para>
-
-<itemizedlist>
-<listitem>
-
-<para>
-Soft-booting secondary cards through the int10 BIOS interface is
-now possible using the x86emu real mode emulator.
-</para>
-</listitem>
-
-</itemizedlist>
-
-</para>
-
-</sect2>
-
-<sect2>
-<title>New OS dependent features in XFree86 3.9.17</title>
-
-<para>
-
-<itemizedlist>
-<listitem>
-
-<para>
-Support for <emphasis>silken mouse</emphasis> with the wsmouse protocol has
-been added.
-</para>
-</listitem>
-<listitem>
-
-<para>
-A new version of the Aperture driver which provides MTRR
-support is included.
-</para>
-</listitem>
-
-</itemizedlist>
-
-</para>
-
-</sect2>
-
-</sect1>
-
-<!--
-<sect1>
-<title>Installing the Binaries</title>
-
-<para>
-Refer to the <ULink URL="Install.html">Installation Document</ULink>
-for detailed installation instructions.
-</para>
-
-</sect1>
--->
-
-<sect1>
-<title>Configuring X for Your Hardware</title>
-
-<para>
-The <filename>/etc/X11/xorg.conf</filename> file tells the X server what kind of
-monitor,
-video card and mouse you have, if it cannot determine the information by
-probing the hardware.
-</para>
-
-<para>
-You'll need info on your hardware:
-
-<itemizedlist>
-<listitem>
-
-<para>
-Your mouse type, baud rate and its /dev entry.
-</para>
-</listitem>
-<listitem>
-
-<para>
-The video card's chipset (e.g. ET4000, S3, etc).
-</para>
-</listitem>
-<listitem>
-
-<para>
-Your monitor's sync frequencies.
-</para>
-</listitem>
-
-</itemizedlist>
-
-</para>
-
-<para>
-For details about the <filename>xorg.conf</filename> file format, refer to the
-<emphasis><ulink url="xorg.conf.5.html">xorg.conf(5)</ulink></emphasis> manual page.
-</para>
-
-<para>
-Once you've set up a xorg.conf file, you can fine tune the video
-modes with the <command>xvidtune</command> utility.
-</para>
-
-<sect2>
-<title>About mouse configuration</title>
-
-<para>
-X11R&relvers; has support for the mouse driver included in
-the <filename>wscons</filename> console driver introduced by NetBSD 1.4. Specify
-<quote><literal remap="tt">wsmouse</literal></quote> as the protocol 
-and <quote><literal remap="tt">/dev/wsmouse0</literal></quote> as the
-device in <filename>/etc/X11/xorg.conf</filename> if you're using NetBSD 1.4 or later
-with a PS/2 mouse.
-</para>
-
-<para>
-For older releases, the NetBSD <filename>pms</filename> mouse driver handles PS/2 style
-mice as Busmouse. Specify the protocol as <quote><literal remap="tt">busmouse</literal></quote> in the
-mouse section of your <filename>xorg.conf</filename> file if you're using a PS/2
-mouse with NetBSD 1.3 or former releases.
-</para>
-
-<para>
-Only standard PS/2 mice are supported by this driver. Newest PS/2
-mice that send more than three bytes at a time (especially
-Intellimouse, or MouseMan+ with a wheel) are not supported by NetBSD
-1.3 and former releases.
-</para>
-
-<para>
-See <ulink url="../mouse.html">README.mouse</ulink>  for general
-instruction on mouse configuration.
-</para>
-
-</sect2>
-
-</sect1>
-
-<sect1>
-<title>Running X</title>
-
-<para>
-The easiest way for new users to start X windows is to type:
-
-<screen>
-startx &#62;&#38; startx.log
-</screen>
-
-Error messages are lost unless you redirect them
-because the server takes over the screen.
-</para>
-
-<para>
-To get out of X windows, type: <quote><userinput>exit</userinput></quote>
-in the console <command>xterm</command>.
-You can customize your X by creating <filename>.xinitrc</filename>,
-<filename>.xserverrc</filename>, and <filename>.twmrc</filename> files
-in your home directory as described in the <command>xinit</command>
-and <command>startx</command> man pages.
-</para>
-
-<sect2>
-<title>Starting Xdm, the display manager</title>
-
-<para>
-To start the display manager, log in as root on the console and type:
-<quote><userinput>xdm -nodaemon</userinput></quote>.
-</para>
-
-<para>
-You can start xdm automatically on bootup by changing the line
-
-<screen>
-xdm=NO			xdm_flags=""            # x11 display manager
-</screen>
-
-to:
-
-<screen>
-xdm=YES			xdm_flags=""            # x11 display manager
-</screen>
-
-in <filename>/etc/rc.conf</filename>.
-</para>
-
-<para>
-Under NetBSD 1.4 and later with the wscons console driver, you must
-enable a virtual console for the X server first. To do this follow
-these steps:
-
-<itemizedlist>
-<listitem>
-
-<para>
-Make sure the device file exists. If not, <quote><userinput>cd /dev ;
-./MAKEDEV wscons</userinput></quote>.
-</para>
-</listitem>
-<listitem>
-
-<para>
-Next, make sure your kernel wants to do wscons. (see <xref linkend="wscons"/>).
-</para>
-</listitem>
-<listitem>
-
-<para>
-Next, make sure <quote><literal remap="tt">wscons=YES</literal></quote> in
-<filename>/etc/rc.conf</filename>.
-</para>
-</listitem>
-<listitem>
-
-<para>
-Next, make sure <filename>/etc/wscons.conf</filename> exists. The relevant
-bits:
-
-<screen>
-#screen	0	-	vt100
-screen	1	-	vt100
-screen	2	-	vt100
-screen	3	-	vt100
-screen	4	-	-
-screen	5	-	vt100
-</screen>
-
-</para>
-</listitem>
-
-</itemizedlist>
-
-(Thanks to Mason Loring Bliss
-<email>&lt;mason@acheron.middleboro.ma.us&gt;</email> for this explanation)
-</para>
-
-</sect2>
-
-</sect1>
-
-<sect1>
-<title>Kernel Support for X</title>
-
-<para>
-To make sure X support is enabled under NetBSD, the following
-line must be in your config file in <filename>/sys/arch/i386/conf</filename>:
-</para>
-
-<para>
-
-<screen>
-options XSERVER, UCONSOLE
-</screen>
-
-</para>
-
-<sect2>
-<title>Console drivers</title>
-
-<para>
-The server supports the standard NetBSD/i386
-console drivers: pccons, pcvt and wscons (in pcvt compatibility
-mode). They are detected at runtime and no
-configuration of the server itself is required.
-</para>
-
-<para>
-The pccons driver is the most widely tested and is the console driver
-contained in the NetBSD binary distribution's kernels.
-</para>
-
-<para>
-The pcvt console driver was bundled with NetBSD until 1.4. The pcvt X
-mode is compatible with the pccons driver X mode. It offers several
-virtual consoles and international keyboard support. In order to use
-this driver, change the line:
-</para>
-
-<para>
-
-<screen>
-device          pc0     at isa? port "IO&lowbar;KBD" irq 1
-</screen>
-
-</para>
-
-<para>
-to
-</para>
-
-<para>
-
-<screen>
-device         vt0     at isa? port "IO&lowbar;KBD" irq 1
-</screen>
-
-</para>
-
-<para>
-in your kernel config file, and rebuild and install your kernel.
-</para>
-
-<para id="wscons" xreflabel="below">
-Wscons is the current console driver, included in NetBSD 1.4 and
-later. For now, X supports wscons using the pcvt compatibility
-mode, so be sure to have the lines:
-
-<screen>
-options         WSDISPLAY_COMPAT_PCVT           # emulate some ioctls
-options         WSDISPLAY_COMPAT_SYSCONS        # emulate some ioctls
-options         WSDISPLAY_COMPAT_USL		# VT handling
-options         WSDISPLAY_COMPAT_RAWKBD         # can get raw scancodes
-</screen>
-
-in your kernel configuration file if you're using wscons. Refer to the
-<emphasis>wscons(4)</emphasis> and <emphasis>wsmouse(4)</emphasis> manual pages for
-informations on how to configure wscons into the kernel.
-</para>
-
-</sect2>
-
-<sect2>
-<title>Aperture Driver</title>
-
-<para>
-By default NetBSD include the BSD 4.4 kernel security
-feature that disable access to the <filename>/dev/mem</filename> device when in
-multi-users mode. But X.Org Foundation X servers can take advantage
-(or require)
-linear access to the display memory.
-</para>
-
-<para>
-Most X11R&relvers; card drivers require linear memory access.
-There are two ways to allow X to access linear memory:
-</para>
-
-<para>
-The first way is to disable the kernel security feature by adding
-<quote><filename>option INSECURE</filename></quote> in the kernel configuration file and build a new
-kernel.
-</para>
-
-<para>
-The second way is to install the aperture driver, included in source form in
-<filename>xc/programs/Xserver/hw/xfree86/etc/apNetBSD.shar</filename> in the
-X11R6.9 source distribution. Unpack it in a new directory of your
-choice by running:
-
-<screen>
-  sh apNetBSD.shar
-</screen>
-
-By default the aperture driver will be installed in
-<filename>/usr/local/aperture</filename>. You can change this default directory by
-editing <filename>Makefile.inc</filename> before building it.
-</para>
-
-<para>
-Then run <quote><userinput>make build</userinput></quote> as root to install it. To enable it,
-add the following line to  <filename>/etc/lkm.conf</filename>:
-
-<screen>
-/usr/local/aperture/lkm/xf86.o  -  - /usr/local/aperture/lkm/xf86_mod_install - -
-</screen>
-
-and set <quote><literal remap="tt">lkm=YES</literal></quote> in <filename>/etc/rc.conf</filename>
-</para>
-
-<para>
-Reboot your system. X will auto-detect the aperture
-driver if available.
-</para>
-
-<para>
-<emphasis remap="bf">Warning 1:</emphasis> if you boot another kernel than <filename>/netbsd</filename>,
-loadable kernel modules can crash your system. Always boot in
-single user mode when you want to run another kernel.
-</para>
-
-<para>
-<emphasis remap="bf">Warning 2:</emphasis> the  aperture driver only allows one access at a time
-(so that the system is in the same security state once X is
-launched). This means that if you run multiple servers on multiples
-VT, only the first one will have linear memory access.
-Use <quote>option INSECURE</quote> if you need more that one X server at a time.
-</para>
-
-<para>
-Starting with XFree86 3.9.17, the XFree86 aperture driver
-also supports MTRR write combining on Pentiums II
-and AMD K6 class processors.
-</para>
-
-</sect2>
-
-<sect2>
-<title>MIT-SHM</title>
-
-<para>
-NetBSD 1.0 and later supports System V shared memory. If X
-detects this support in your kernel, it will support the MIT-SHM
-extension.
-</para>
-
-<para>
-To add support for system V shared memory to your kernel add the
-lines:
-</para>
-
-<para>
-
-<screen>
- # System V-like IPC
- options         SYSVMSG
- options         SYSVSEM
- options         SYSVSHM
-</screen>
-
-</para>
-
-<para>
-to your kernel config file.
-</para>
-
-</sect2>
-
-</sect1>
-
-<sect1>
-<title>Rebuilding the X Distribution</title>
-
-<para>
-You should configure the distribution by editing
-<filename>xc/config/cf/host.def</filename>  before compiling.  To compile the
-sources, invoke <quote><userinput>make World</userinput></quote> in the xc directory.
-</para>
-
-<sect2>
-<title>Aperture driver</title>
-
-<para>
-To build the X server with the Aperture driver enabled, you
-should unpack <filename>apNetBSD.shar</filename> and install it first.
-</para>
-
-<para>
-Then edit <filename>xc/config/cf/host.def</filename> and add the line
-
-<screen>
-#define HasNetBSDApertureDriver    YES
-</screen>
-
-to it before rebuilding X.
-</para>
-
-</sect2>
-
-<sect2 id="console-drivers">
-<title>Console drivers</title>
-
-<para>
-X has a configuration option to select the console
-drivers to use in <filename>host.def</filename>:
-
-<itemizedlist>
-<listitem>
-
-<para>
- if you're using pccons put:
-
-<screen>
- #define XFree86ConsoleDefines -DPCCONS_SUPPORT
-</screen>
-
-</para>
-</listitem>
-<listitem>
-
-<para>
-if you're using pcvt put:
-
-<screen>
- #define XFree86ConsoleDefines -DPCVT_SUPPORT
-</screen>
-
-</para>
-</listitem>
-
-</itemizedlist>
-
-If you don't define <emphasis remap="bf">XFree86ConsoleDefines</emphasis> in <filename>host.def</filename> the
-pccons and pcvt drivers will be supported by default.
-</para>
-
-<para>
-Experimental native support for the wscons console driver can be built
-by adding:
-
-<screen>
- #define XFree86ConsoleDefines -DWSCONS_SUPPORT
-</screen>
-
-to <filename>xc/config/host.def</filename> before rebuilding the server.
-This has not been thoroughly tested, except on the macppc.
-</para>
-
-<para>
-For the i386, you should include both pcvt and wscons support in order
-to use the pcvt compatibility mode of wscons:
-
-<screen>
- #define XFree86ConsoleDefines -DPCVT_SUPPORT -DWSCONS_SUPPORT
-</screen>
-
-</para>
-
-</sect2>
-
-<sect2 id="otherarchs">
-<title>Building on other architectures</title>
-
-<para>
-
-Note that the NetBSD project has now its own source tree, based on the
-X source tree, with some local modifications. You may want to
-start with this tree to rebuild from sources.
-The NetBSD xsrc source tree is available at:
-<ulink
-url="ftp://ftp.netbsd.org/pub/NetBSD/NetBSD-current/xsrc/"
->ftp://ftp.netbsd.org/pub/NetBSD/NetBSD-current/xsrc/</ulink>
-</para>
-
-</sect2>
-
-</sect1>
-
-<sect1>
-<title>Building New X Clients</title>
-
-<para>
-The easiest way to build a new client (X application) is to use
-<command>xmkmf</command> if an <filename>Imakefile</filename> is included
-in the sources.  Type <quote><userinput>xmkmf -a</userinput></quote> to
-create the Makefiles, check the configuration if necessary and
-type <quote><userinput>make</userinput></quote>.  Whenever you install
-additional man pages you should update <filename>whatis.db</filename> by
-running <quote><userinput>makewhatis /usr/X11R6/man</userinput></quote>.
-</para>
-
-<para>
-When porting clients to *BSD
-systems, make use of the symbol <symbol>BSD</symbol> for code which is truly
-BSD-specific.  The value of the symbol can be used to distinguish
-different BSD releases.  For example, code specific to the Net-2 and
-later releases can use:
-</para>
-
-<para>
-
-<programlisting>
-
-&num;if (BSD &#62;= 199103)
-</programlisting>
-
-</para>
-
-<para>
-To ensure that this symbol is correctly defined, include
-<filename>&lt;sys/param.h&gt;</filename> in the source that requires it.  Note that
-the symbol <emphasis remap="bf">CSRG&lowbar;BASED</emphasis> is defined for *BSD systems in XFree86 3.1.1
-and later.  This should be used to protect the inclusion of
-<filename>&lt;sys/param.h&gt;</filename>.
-</para>
-
-<para>
-For code that really is specific to a particular i386 BSD port, use
-<emphasis remap="bf">&lowbar;&lowbar;FreeBSD&lowbar;&lowbar;</emphasis> for FreeBSD, <emphasis remap="bf">&lowbar;&lowbar;NetBSD&lowbar;&lowbar;</emphasis> for NetBSD,
-<emphasis remap="bf">&lowbar;&lowbar;OpenBSD&lowbar;&lowbar;</emphasis> for OpenBSD,
-and <emphasis remap="bf">&lowbar;&lowbar;bsdi&lowbar;&lowbar;</emphasis> for BSD/386.
-</para>
-
-</sect1>
-
-<sect1>
-<title>Thanks</title>
-
-<para>
-Many thanks to all people who contributed to make XFree86 work on
-*BSD, in particular:
-<emphasis remap="bf">David Dawes</emphasis>,
-<emphasis remap="bf">Todd Fries</emphasis>,
-<emphasis remap="bf">Rod Grimes</emphasis>,
-<emphasis remap="bf">Charles Hannum</emphasis>,
-<emphasis remap="bf">Amancio Hasty</emphasis>,
-<emphasis remap="bf">Christoph Robitschko</emphasis>,
-<emphasis remap="bf">Matthias Scheler</emphasis>,
-<emphasis remap="bf">Michael Smith</emphasis>,
-<emphasis remap="bf">Ignatios Souvatzis</emphasis>,
-<emphasis remap="bf">Jack Velte</emphasis>,
-<emphasis remap="bf">Nate Williams</emphasis> and
-<emphasis remap="bf">Pace Willison</emphasis>.
-</para>
-
-</sect1>
-
-</article>
diff --git a/general/platforms/OpenBSD.xml b/general/platforms/OpenBSD.xml
deleted file mode 100644
index a2f81b9..0000000
--- a/general/platforms/OpenBSD.xml
+++ /dev/null
@@ -1,463 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
-                      "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd"
-[
-<!ENTITY % defs SYSTEM "/xorg-sgml-doctools/X11/defs.ent"> %defs;
-]>
-
-<article>
-
-<articleinfo>
-
-<title>README for X11R&relvers; on OpenBSD</title>
-<author>
-<firstname>Matthieu</firstname><surname>Herrb</surname>
-</author>
-<pubdate>Last modified on: 4 February 2005.</pubdate>
-
-</articleinfo>
-
-<sect1>
-<title>What and Where is X11R7&relvers;?</title>
-
-<para>
-The X.Org Foundation X11R&relvers; is an Open Source version of
-the X Window System that supports
-several UNIX(R) and UNIX-like operating systems (such as Linux, the BSDs
-and Solaris x86) on Intel and other platforms.
-</para>
-
-<para>
-See the <ulink url="../LICENSE.html">Copyright Notice</ulink>.
-</para>
-
-<para>
-The sources for X11R&relvers; are available from
-<ulink url="http://wiki.x.org">http://wiki.x.org</ulink>
-</para>
-
-<para>
-X11R&relvers; builds on most architectures supported by OpenBSD. See section
-<xref linkend="otherarch"/> for details.
-</para>
-
-</sect1>
-
-<sect1>
-<title>Bug Reports for This Document</title>
-
-<para>
-Use the X.Org Bugzilla at <ulink 
-url="http://bugs.freedesktop.org">http://bugs.freedesktop.org</ulink>
-to submit comments or suggestions about this file, using the xorg product.
-</para>
-
-</sect1>
-
-<sect1>
-<title>New OS dependent features</title>
-
-<para>
-See the <ulink url="ReleaseNotes.html">Release Notes</ulink> for
-non-OS dependent new features in X11R&relvers;.
-</para>
-
-<para>
-
-<itemizedlist>
-<listitem>
-
-<para>
-Switch the the Xinput-aware kbd driver for keyboard input
-</para>
-</listitem>
-
-</itemizedlist>
-
-</para>
-
-<sect2>
-<title>New OS related features in X.Org 6.8</title>
-
-<para>
-
-<itemizedlist>
-<listitem>
-
-<para>
-Support for Propolice in modules.
-</para>
-</listitem>
-<listitem>
-
-<para>
-Server support for OpenBSD/amd64.
-</para>
-</listitem>
-
-</itemizedlist>
-
-</para>
-
-</sect2>
-
-</sect1>
-
-<sect1>
-<title>Configuring X for Your Hardware</title>
-
-<para>
-The <filename>/etc/X11/xorg.conf</filename> file tells the X server what kind of
-monitor,
-video card and mouse you have.  You <emphasis>must</emphasis> create it to tell the
-server what specific hardware you have.
-</para>
-
-<para>
-You'll need info on your hardware:
-
-<itemizedlist>
-<listitem>
-
-<para>
-Your mouse type, baud rate and its /dev entry.
-</para>
-</listitem>
-<listitem>
-
-<para>
-The video card's chipset (e.g. ATI Radeon, nVidia GeForce 4/MX etc).
-</para>
-</listitem>
-<listitem>
-
-<para>
-Your monitor's sync frequencies.
-</para>
-</listitem>
-
-</itemizedlist>
-
-</para>
-
-<para>
-The recommended way to generate an <filename>xorg.conf</filename> file is to use the
-<command>xorgcfg</command> utility.  The xorgconfig text utility is still there
-for the (few) cases where xorgcfg can't be used. Also, there is a
-sample file installed as <filename>/usr/X11R6/lib/X11/xorg.conf.eg</filename>,
-which can be used as a starting point.
-</para>
-
-<para>
-For details about the <filename>xorg.conf</filename> file format, refer to the
-<emphasis><ulink url="xorg.conf.5.html">xorg.conf(5)</ulink></emphasis>
-manual page.
-</para>
-
-<para>
-Once you've set up a xorg.conf file, you can fine tune the video
-modes with the <command>xvidtune</command> utility.
-</para>
-
-<sect2>
-<title>About mouse configuration</title>
-
-<para>
-X11R&relvers; has support for the mouse driver included in
-the new <emphasis remap="bf">wscons</emphasis> console driver.
-Specify <quote><filename>wsmouse</filename></quote> as the protocol and
-<quote><filename>/dev/wsmouse</filename></quote> as the  device in <filename>/etc/X11/xorg.conf</filename>
-with a PS/2 or USB mouse.
-</para>
-
-<para>
-See <ulink
-url="mouse.html"
->README.mouse</ulink
->  for general
-instruction on mouse configuration.
-</para>
-
-</sect2>
-
-</sect1>
-
-<sect1>
-<title>Running X</title>
-
-<sect2>
-<title>Starting xdm, the display manager</title>
-
-<para>
-To start the display manager, log in as root on the console and type:
-<quote><userinput>xdm -nodaemon</userinput></quote>.
-</para>
-
-<para>
-You can start xdm automatically on bootup by adding the line:
-
-<screen>
-xdm_flags=""            # for normal use: xdm_flags=""
-</screen>
-
-in <filename>/etc/rc.conf.local</filename>.
-</para>
-
-</sect2>
-
-<sect2>
-<title>Running X without the display manager</title>
-
-<para>
-The easiest way for new users to start X windows is to type: <quote><userinput>startx
-&#62;&amp; startx.log</userinput></quote>.  Error messages are lost unless you redirect them
-because the server takes over the screen.
-</para>
-
-<para>
-To get out of X windows, type: <quote><userinput>exit</userinput></quote> in the console xterm.
-You can customize your X by creating <filename>.xinitrc</filename>, <filename>.xserverrc</filename>,
-and <filename>.twmrc</filename> files in your home directory as described in the xinit
-and startx man pages.
-</para>
-
-</sect2>
-
-</sect1>
-
-<sect1>
-<title>Kernel Support for X</title>
-
-<para>
-OpenBSD's GENERIC kernels have all support for running X enabled.
-</para>
-
-<sect2>
-<title>Console drivers</title>
-
-<para>
-The server supports wscons, the standard OpenBSD/i386 console driver.
-</para>
-
-</sect2>
-
-<sect2>
-<title>Aperture Driver</title>
-
-<para>
-By default OpenBSD includes the BSD 4.4 kernel security
-feature that disables access to the <filename>/dev/mem</filename> device when in
-multi-user mode. But the X server requires
-linear access to the display memory in most cases.
-</para>
-
-<para>
-OpenBSD requires the aperture driver to be enabled for all X
-servers, because the aperture driver also controls access to the
-I/O ports of the video boards.
-</para>
-
-<para>
-To enable the aperture driver, once included in the kernel, set
-
-<screen>
-machdep.allowaperture=2
-</screen>
-
-in <filename>/etc/sysctl.conf</filename>.  See the
-<ulink
-url="http://www.openbsd.org/cgi-bin/man.cgi?query=xf86&#38;apropos=0&#38;sektion=4&#38;manpath=OpenBSD+Current&#38;arch=i386&#38;format=html"
->xf86(4)</ulink
->
-manual page for details.
-</para>
-
-<para>
-Another (less recommended) way to enable linear memory and I/O ports
-access is to disable the kernel security feature by
-initializing <varname>securelevel</varname> to -1
-in <filename>/etc/rc.securelevel</filename>.
-</para>
-
-<note><title>Caveat:</title>
-<para>
-the aperture driver only allows one access at a time
-(so that the system is in the same security state once X is
-launched). This means that if you run multiple servers on multiple
-virtual terminals, only the first one will have linear memory access.
-Set <varname>securelevel</varname> to -1 if you need more that one X
-server at a time.
-</para></note>
-
-</sect2>
-
-<sect2>
-<title>MIT-SHM</title>
-
-<para>
-OpenBSD supports System V shared memory. If X
-detects this support in your kernel, it will support the MIT-SHM
-extension.
-</para>
-
-</sect2>
-
-</sect1>
-
-<sect1>
-<title>Rebuilding the X Distribution</title>
-
-<para>
-
-Note that OpenBSD project now has its own source tree,
-with some local modifications. You may want
-to start with this tree to rebuild from sources.  The OpenBSD XF4
-source tree is available by anoncvs from all OpenBSD anoncvs
-servers. See <ulink url="http://www.openbsd.org/anoncvs.html"
->http://www.openbsd.org/anoncvs.html</ulink> for details on anoncvs.
-</para>
-
-<para>
-<anchor id="otherarch" xreflabel="Building on other architectures" />
-</para>
-
-<para>
-X11R&relvers; compiles on most OpenBSD architectures. The X.Org
-X server builds and run on the following systems. On other
-architectures supported by OpenBSD, only client side libraries and
-applications are supported.
-</para>
-
-<sect2>
-<title>OpenBSD/alpha</title>
-
-<para>
-The X server is known to work on some VGA cards in alpha
-machines that support BWX I/O, with OpenBSD 3.2 and higher.
-</para>
-
-<para>
-The following cards have been successfully tested for now:
-
-<itemizedlist>
-<listitem>
-
-<para>
-3DLabs Permedia 2 (8, 15, 16 and 24 bits depth)
-</para>
-</listitem>
-<listitem>
-
-<para>
-ATI Rage Pro (works with 'Option "NoAccel"')
-</para>
-</listitem>
-<listitem>
-
-<para>
-Cirrus Logic CL5430 (works with 'Option "NoAccel"')
-</para>
-</listitem>
-<listitem>
-
-<para>
-Cirrus Logic GD5446 (8, 16 and 24 bits depth)
-</para>
-</listitem>
-<listitem>
-
-<para>
-Matrox MGA 2064 (8, 16 and 24 bits depth)
-</para>
-</listitem>
-
-</itemizedlist>
-
-</para>
-
-<para>
-Note that this version of doesn't work on TGA cards. The
-version shipped with OpenBSD 3.1 and higher includes an OS-specific
-driver <emphasis>wsfb</emphasis> that is used to support TGA cards.
-</para>
-
-</sect2>
-
-<sect2>
-<title>OpenBSD/macppc</title>
-
-<para>
-The X server is currently known to work on most of the G4 Macs and
-iBooks with ATI or nVidia cards.
-Other machines are more or less untested.
-</para>
-
-<para>
-Use xorgconfig to build a /etc/X11/xorg.conf file before starting
-the server for the first time.
-</para>
-
-<para>
-For the Titanium Powerbook G4, you can try the following mode line in
-<filename>/etc/X11/xorg.conf</filename> to match the flat panel resolution:
-</para>
-
-<para>
-
-<screen>
-Modeline "1152x768" 64.995 1152 1213 1349 1472  768 771 777 806 -HSync -VSync
-</screen>
-
-</para>
-
-</sect2>
-
-<sect2>
-<title>OpenBSD/sparc</title>
-
-<para>
-OpenBSD 3.2 on sparc switched to the wscons device driver and now uses
-the OS specific <emphasis>wsfb</emphasis> driver in the X server. This driver is
-not included in X11R&relvers;. Please use the version shipped with
-OpenBSD instead.
-</para>
-
-</sect2>
-
-<sect2>
-<title>OpenBSD/sparc64</title>
-
-<para>
-This version only has support PCI based machines using ATI cards on
-OpenBSD/sparc64. Note that the version shipped with OpenBSD has
-support for the X server on both SBus and UPA (unaccelerated) based cards.
-</para>
-
-</sect2>
-
-</sect1>
-
-<sect1>
-<title>Thanks</title>
-
-<para>
-Many thanks to all people who contributed to make X11R&relvers; work on
-*BSD, in particular:
-<emphasis remap="bf">David Dawes</emphasis>,
-<emphasis remap="bf">Todd Fries</emphasis>,
-<emphasis remap="bf">Miodrag Vallat</emphasis>,
-<emphasis remap="bf">Rod Grimes</emphasis>,
-<emphasis remap="bf">Charles Hannum</emphasis>,
-<emphasis remap="bf">Amancio Hasty</emphasis>,
-<emphasis remap="bf">Christoph Robitschko</emphasis>,
-<emphasis remap="bf">Matthias Scheler</emphasis>,
-<emphasis remap="bf">Michael Smith</emphasis>,
-<emphasis remap="bf">Ignatios Souvatzis</emphasis>,
-<emphasis remap="bf">Jack Velte</emphasis>,
-<emphasis remap="bf">Nate Williams</emphasis> and
-<emphasis remap="bf">Pace Willison</emphasis>.
-</para>
-
-</sect1>
-
-</article>