summaryrefslogtreecommitdiff
path: root/sound/soc/codecs
AgeCommit message (Collapse)AuthorFilesLines
2014-01-09Merge remote-tracking branches 'asoc/topic/ad1836', 'asoc/topic/ad193x', ↵Mark Brown49-1370/+1653
'asoc/topic/adav80x', 'asoc/topic/adsp', 'asoc/topic/ak4641', 'asoc/topic/ak4642', 'asoc/topic/arizona', 'asoc/topic/atmel', 'asoc/topic/au1x', 'asoc/topic/axi', 'asoc/topic/bcm2835', 'asoc/topic/blackfin', 'asoc/topic/cs4271', 'asoc/topic/cs42l52', 'asoc/topic/da7210', 'asoc/topic/davinci', 'asoc/topic/docs', 'asoc/topic/ep93xx', 'asoc/topic/fsl', 'asoc/topic/fsl-mxs', 'asoc/topic/generic', 'asoc/topic/hdmi', 'asoc/topic/jack', 'asoc/topic/jz4740', 'asoc/topic/kirkwood', 'asoc/topic/max98090', 'asoc/topic/mc13783', 'asoc/topic/mxs', 'asoc/topic/nuc900', 'asoc/topic/omap', 'asoc/topic/pxa', 'asoc/topic/rcar', 'asoc/topic/s6000', 'asoc/topic/sai', 'asoc/topic/samsung', 'asoc/topic/sgtl5000', 'asoc/topic/sh', 'asoc/topic/spear', 'asoc/topic/ssm2518', 'asoc/topic/ssm2602', 'asoc/topic/tegra', 'asoc/topic/tlv320aic3x', 'asoc/topic/twl4030', 'asoc/topic/twl6040', 'asoc/topic/txx9', 'asoc/topic/uda1380', 'asoc/topic/ux500', 'asoc/topic/width', 'asoc/topic/wm8510', 'asoc/topic/wm8523', 'asoc/topic/wm8580', 'asoc/topic/wm8711', 'asoc/topic/wm8728', 'asoc/topic/wm8731', 'asoc/topic/wm8741', 'asoc/topic/wm8750', 'asoc/topic/wm8753', 'asoc/topic/wm8776', 'asoc/topic/wm8804', 'asoc/topic/wm8900', 'asoc/topic/wm8901', 'asoc/topic/wm8940', 'asoc/topic/wm8962', 'asoc/topic/wm8974', 'asoc/topic/wm8985', 'asoc/topic/wm8988', 'asoc/topic/wm8990', 'asoc/topic/wm8991', 'asoc/topic/wm8994', 'asoc/topic/wm8995', 'asoc/topic/wm9081' and 'asoc/topic/x86' into asoc-next
2014-01-09Merge remote-tracking branches 'asoc/fix/adau1701' and 'asoc/fix/fsl' into ↵Mark Brown1-1/+1
asoc-linus
2014-01-09ASoC: wm_adsp: Mark wm_adsp2_boot_work as staticCharles Keepax1-1/+1
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-08ASoC: wm_adsp: Start DSP booting earlier in the DAPM processCharles Keepax3-13/+38
Move the start of booting the DSP to earlier in the DAPM process, and move the final starting of the DSP to later in the DAPM process. This allows us to overlap some of the processing with other components of the system being brought up. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-08ASoC: wm_adsp: Factor out ADSP2 boot proceedureCharles Keepax2-78/+105
Move the ADSP2 boot proceedure into a work structure in preparation for running it asynchronously with the reset of the audio path bring up. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-08ASoC: ssm2602: add 16kHz sampling rate supportAndreas Pretzsch1-4/+10
SSM260x also supports 16kHz with external master clocks of 12.000MHz, 12.288MHz and 18.432MHz. Add matching coefficients, update constraints and announced rates. Signed-off-by: Andreas Pretzsch <apr@cn-eng.de> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-08ASoC: twl4030: Pass the twl4030_priv directly to twl4030_can_write_to_chip()Peter Ujfalusi1-3/+2
To avoid another lookup for the twl4030_priv in there. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-08ASoC: twl4030: Move the ctl cache update local to twl4030_write() functionPeter Ujfalusi1-20/+16
There's no other users of this functionality, the code can be moved inside of twl4030_write. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-08ASoC: twl4030: Parameter alignment fixes (for code consistency)Peter Ujfalusi1-48/+45
Over time the multi line alignment got messed up. Correct them in one go so the code will look consistent. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-08ASoC: twl4030: Remove local reg cachePeter Ujfalusi1-144/+63
Depend on the regmap reg cache implementation for register caching done in the twl-core driver. The local register cache can be removed and we can keep only shadow copies of certain ctl registers for pop noise reduction. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-08ASoC: twl4030: Introduce local ctl register cachePeter Ujfalusi1-0/+15
Few registers need to be cached in the codec driver level. These registers should only be written when the path is active to avoid pop noise on the given path. This patch adds an array which covers the range where the sensitive registers are located and uppon loadinf the driver the ctl cache will be initialized. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-08ASoC: twl4030: Remove reset registers functionalityPeter Ujfalusi1-17/+0
The register states now tracked by the regmap implementation in the core which makes the reset registers functionality 'redundant' since we know the state of the registers now all the time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-08ASoC: twl4030: Remove check defaults functionalityPeter Ujfalusi1-23/+0
No need to keep the check defaults functionality anymore. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-08ASoC: twl4030: Separate write condition checking from I/O functionPeter Ujfalusi1-17/+23
Simplifies the code a bit and prepares it to the removal of local caching. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-08ASoC: adau1701: Fix ADAU1701_SEROCTL_WORD_LEN_16 constantLars-Peter Clausen1-1/+1
The driver defines ADAU1701_SEROCTL_WORD_LEN_16 as 0x10 while it should be b10, so 0x2. This patch fixes it. Reported-by: Magnus Reftel <magnus.reftel@lockless.no> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2014-01-06ASoC: mc13783: trivial: Cleanup moduleAlexander Shiyan1-10/+7
This is a trivial cleanup: remove useless variable mc13xxx and extra spaces. No functional changes. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-06ASoC: mc13783: Drop fixed ADC & DAC ports usageAlexander Shiyan1-2/+1
There are no users of this driver without pdata, so stop using constant assignment of ADC and DAC ports. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-06ASoC: mc13783: Use core error messages if registration failsAlexander Shiyan1-8/+0
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-06ASoC: mc13783: Use module_platform_driver_probe()Alexander Shiyan1-4/+2
mc13783-codec is probed only by MC13XXX MFD core driver so use module_platform_driver_probe(). Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-02ASoC: ad1836: Reject unsupported bit sizesMark Brown1-0/+2
Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Lars-Peter Clausen <lars@metafoo.de>
2014-01-02ASoC: ssm2518: Fix off-by-one error by ffs()Takashi Iwai1-4/+4
ffs() returns the bit position from 1, while the ssm2158 driver code assumes it being 0-based. Also, the bit mask computation of the two channel slots are incorrect; it must have worked just casually. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-31ASoC: hdmi-codec: Add devicetree binding with documentationJyri Sarha1-0/+10
Signed-off-by: Jyri Sarha <jsarha@ti.com> cc: bcousson@baylibre.com Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-19ASoC: twl6040: Remove self managed local reg_cache supportPeter Ujfalusi1-162/+49
We can rely on mfd driver to manage the register caching via regmap. The driver still need to cache some registers associated with DL1/2 routes. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-19ASoC: twl6040: Remove register restore functionalityPeter Ujfalusi1-29/+0
The MFD core takes care of the restore via standard regmap API, no need to do this anymore here. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-19ASoC: twl6040: Custom caching for sensitive DL1/2 path registersPeter Ujfalusi1-2/+49
Introduce a small register cache for registers which needs special caching to reduce pop noise: TWL6040_REG_HSLCTL, TWL6040_REG_HSRCTL, TWL6040_REG_EARCTL, TWL6040_REG_HFLCTL and TWL6040_REG_HFRCTL. Switch over and use the new small cache for these registers instead of the main reg_cache. This is in preparation to remove the local ASoC reg_cache from the driver. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-19ASoC: twl6040: Rename twl6040_is_path_unmuted -> twl6040_can_write_to_chipPeter Ujfalusi1-3/+3
Matches more precisely of the functionality. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-19Merge remote-tracking branches 'asoc/fix/adsp', 'asoc/fix/arizona', ↵Mark Brown4-5/+22
'asoc/fix/atmel', 'asoc/fix/fsl', 'asoc/fix/kirkwood', 'asoc/fix/tegra', 'asoc/fix/wm8904' and 'asoc/fix/wm8962' into asoc-linus
2013-12-19ASoC: wm5110: Add support for ASRC RATE 1Charles Keepax3-0/+9
Add support for configuring the sample rate on the SYSCLK side of the ASRC. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-19ASoC: wm5110: Add FSH for ISRCsCharles Keepax3-0/+20
Currently, the driver only supports configuration of the lower sample rate (FSL) on the ISRCs. With the higher rate being fixed a SYSCLK, this patch adds support for configuring the higher sample rate (FSH). Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-19ASoC: wm5110: Expose switch controls for DRECharles Keepax1-0/+7
Certain use-cases require the DRE to be disabled so expose controls for the enables. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-18ASoC: sgtl5000: clean up sgtl5000_enable_regulators()Shawn Guo1-40/+22
Function sgtl5000_enable_regulators() is somehow odd in handling the optional external VDDD supply. The driver can only enable this supply on SGTL5000 chip before revision 0x11, and of course when this external VDDD is present. It currently does something like below. 1. Check if regulator_bulk_get() on VDDA, VDDIO and VDDD will fail. If it fails, VDDD must be absent and it falls on internal LDO by calling sgtl5000_replace_vddd_with_ldo(). Otherwise, VDDD is used. And in either case, regulator_bulk_enable() will be called to enable 3 supplies. 2. In case that SGTL5000 revision is later than 0x11, even if external VDDD is present, it has to roll back the 'enable' and 'get' calls with regulator_bulk_disable() and regulator_bulk_free(), and starts over again by calling sgtl5000_replace_vddd_with_ldo() and regulator_bulk_enable(). Such back and forth calls sequence is complicated and unnecessary. Also, since commit 4ddfebd (regulator: core: Provide a dummy regulator with full constraints), regulator_bulk_get() will always succeeds because of the dummy regulator. Thus the VDDD detection is broken. The patch changes the flow to something like the following, which should be more reasonable and clear, and also fix the VDDD detection breakage. 1. Check if we're running a chip before revision 0x11, on which an external VDDD can possibly be an option. 2. If it is an early revision, call regulator_get_optional() to detect whether an external VDDD supply is available. 3. If external VDDD is present, call sgtl5000_replace_vddd_with_ldo() to update sgtl5000->supplies info. 4. Drop regulator_bulk_get() call in sgtl5000_replace_vddd_with_ldo(), and call it in sgtl5000_enable_regulators() no matter it's an external VDDD or internal LDO. 5. Call regulator_bulk_enable() to enable these 3 regulators. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-18ASoC: wm8904: fix DSP mode B configurationBo Shen1-1/+1
When wm8904 work in DSP mode B, we still need to configure it to work in DSP mode. Or else, it will work in Right Justified mode. Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2013-12-18ASoC: wm_adsp: Add small delay while polling DSP RAM startCharles Keepax1-3/+7
Some devices are getting very close to the limit whilst polling the RAM start, this patch adds a small delay to this loop to give a longer startup timeout. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2013-12-18ASoC: wm_adsp: Remove duplicate info message for DSP RAM readyCharles Keepax1-1/+0
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-17ASoC: wm5110: Correct HPOUT3 DAPM route typoCharles Keepax1-1/+1
Reported-by: Kyung-Kwee Ryu <kyung-kwee.ryu@wolfsonmicro.com> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2013-12-17ASoC: wm8997: Use async writesMark Brown1-2/+2
When writing the patch write to the device asynchronously, allowing better performance when used with a bus like SPI which supports this by minimising the need to context switch back to the driver to get the next bit of data. Signed-off-by: Mark Brown <broonie@linaro.org> Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2013-12-17ASoC: wm5110: Use async writesMark Brown1-2/+2
When writing the patch write to the device asynchronously, allowing better performance when used with a bus like SPI which supports this by minimising the need to context switch back to the driver to get the next bit of data. Signed-off-by: Mark Brown <broonie@linaro.org> Tested-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2013-12-17ASoC: wm5102: Use async writesMark Brown1-2/+2
When writing the patch write to the device asynchronously, allowing better performance when used with a bus like SPI which supports this by minimising the need to context switch back to the driver to get the next bit of data. Signed-off-by: Mark Brown <broonie@linaro.org> Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2013-12-17ASoC: arizona: Use async writesMark Brown1-74/+89
Where possible write to the device asynchronously, allowing better performance when used with a bus like SPI which supports this by minimising the need to context switch back to the driver to get the next bit of data. Signed-off-by: Mark Brown <broonie@linaro.org> Tested-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2013-12-16ASoC: sgtl5000: read chip revision for onceShawn Guo1-13/+3
Store chip revision in struct sgtl5000_priv when sgtl5000_i2c_probe() reads it out from register, so that we can use it in sgtl5000_enable_regulators() with no need to read register again. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-09ASoC: tlv320aic3x: no mono controls 3007 modelJan Weitzel1-43/+83
if codec driver is used for AIC3X_MODEL_3007 the mono iout controls overwrite registers for class-d amplifier. classd amplifier controls are only used for AIC3X_MODEL_3007. Removing all mono snd_kcontrol_new, snd_soc_dapm_widget, snd_soc_dapm_route and aic3x_init stuff from common code and call only for not AIC3X_MODEL_3007 codecs. Testet only with AIC3X_MODEL_3007 Signed-off-by: Jan Weitzel <j.weitzel@phytec.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-05ASoC: wm8962: Enable SYSCLK provisonally before fetching generated DSPCLK_DIVNicolin Chen1-0/+13
DSPCLK_DIV can be only generated correctly after enabling SYSCLK. But if the current bias_level hasn't reached SND_SOC_BIAS_ON, DAPM won't enable SYSCLK, which would cause the calculation result from DSPCLK_DIV invalid since bit DSPCLK_DIV will be finally turned to its true value after DAPM enables SYSCLK while the driver won't calculate it again for the current instance. In this circumstance, a playback which needs non-zero DSPCLK_DIV would be distorted due to unexpected clock frequency resulted from an invalid DSPCLK_DIV value. So this patch provisionally enables the SYSCLK to get a valid DSPCLK_DIV for calculation and then disables it afterward. Signed-off-by: Nicolin Chen <b42378@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-04ASoC: adsp: Use async writes where possibleMark Brown1-9/+9
This will allow a marginal speed improvement when used with a bus that supports async I/O by reducing the amount of context thrashing between writes, allowing the bus to be more fully utilised. Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-03Merge remote-tracking branches 'asoc/fix/arizona', 'asoc/fix/atmel', ↵Mark Brown3-27/+4
'asoc/fix/fsl', 'asoc/fix/kirkwood', 'asoc/fix/omap', 'asoc/fix/rcar', 'asoc/fix/wm8731' and 'asoc/fix/wm8990' into asoc-linus
2013-12-03ASoC: wm8731: fix dsp mode configurationBo Shen1-2/+2
According to WM8731 "PD, Rev 4.9 October 2012" datasheet, when it works in DSP mode A, LRP = 1, while works in DSP mode B, LRP = 0. So, fix LRP for DSP mode as the datesheet specification. Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2013-12-03ASoC: ssm2602: Use core for applying symmetry constraintsLars-Peter Clausen1-48/+2
Let the core take care of applying sample rate and sample bits constraints instead of open-coding this in the driver. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-02ASoC: ak4642: Convert to module_i2c_driver()Mark Brown1-21/+1
The device does not support anything other than I2C (at least with the current driver) so save code. Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-02ASoC: ak4642: Convert to direct regmap API usageMark Brown1-54/+59
This moves us towards being able to remove the ASoC level I/O code which duplicates regmap functionality. Currently the only difference between the supported devices in the driver is the regmap so we can replace the CODEC driver selections with regmap selection instead. Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-02ASoC: ak4642: Convert to table based control initMark Brown1-3/+4
Improves error handling and saves code. Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-29ASoC: cs42l52: Fix buildMark Brown1-1/+1
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Mark Brown <broonie@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-03-21 16:46:32 +0000