diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/wireless/ath5k/Makefile | 12 | ||||
| -rw-r--r-- | drivers/net/wireless/ath5k/ath5k.h | 390 | ||||
| -rw-r--r-- | drivers/net/wireless/ath5k/attach.c | 315 | ||||
| -rw-r--r-- | drivers/net/wireless/ath5k/base.c | 32 | ||||
| -rw-r--r-- | drivers/net/wireless/ath5k/caps.c | 193 | ||||
| -rw-r--r-- | drivers/net/wireless/ath5k/debug.c | 4 | ||||
| -rw-r--r-- | drivers/net/wireless/ath5k/desc.c | 667 | ||||
| -rw-r--r-- | drivers/net/wireless/ath5k/desc.h (renamed from drivers/net/wireless/ath5k/hw.h) | 400 | ||||
| -rw-r--r-- | drivers/net/wireless/ath5k/dma.c | 566 | ||||
| -rw-r--r-- | drivers/net/wireless/ath5k/eeprom.c | 466 | ||||
| -rw-r--r-- | drivers/net/wireless/ath5k/eeprom.h | 215 | ||||
| -rw-r--r-- | drivers/net/wireless/ath5k/gpio.c | 176 | ||||
| -rw-r--r-- | drivers/net/wireless/ath5k/hw.c | 4492 | ||||
| -rw-r--r-- | drivers/net/wireless/ath5k/initvals.c | 22 | ||||
| -rw-r--r-- | drivers/net/wireless/ath5k/pcu.c | 1002 | ||||
| -rw-r--r-- | drivers/net/wireless/ath5k/phy.c | 10 | ||||
| -rw-r--r-- | drivers/net/wireless/ath5k/qcu.c | 488 | ||||
| -rw-r--r-- | drivers/net/wireless/ath5k/reg.h | 102 | ||||
| -rw-r--r-- | drivers/net/wireless/ath5k/reset.c | 925 |
19 files changed, 5435 insertions, 5042 deletions
diff --git a/drivers/net/wireless/ath5k/Makefile b/drivers/net/wireless/ath5k/Makefile index 564ecd0c5d4b..719cfaef7085 100644 --- a/drivers/net/wireless/ath5k/Makefile +++ b/drivers/net/wireless/ath5k/Makefile @@ -1,6 +1,14 @@ -ath5k-y += base.o -ath5k-y += hw.o +ath5k-y += caps.o ath5k-y += initvals.o +ath5k-y += eeprom.o +ath5k-y += gpio.o +ath5k-y += desc.o +ath5k-y += dma.o +ath5k-y += qcu.o +ath5k-y += pcu.o ath5k-y += phy.o +ath5k-y += reset.o +ath5k-y += attach.o +ath5k-y += base.o ath5k-$(CONFIG_ATH5K_DEBUG) += debug.o obj-$(CONFIG_ATH5K) += ath5k.o diff --git a/drivers/net/wireless/ath5k/ath5k.h b/drivers/net/wireless/ath5k/ath5k.h index c1b497873668..4c0211798a7a 100644 --- a/drivers/net/wireless/ath5k/ath5k.h +++ b/drivers/net/wireless/ath5k/ath5k.h @@ -18,18 +18,23 @@ #ifndef _ATH5K_H #define _ATH5K_H -/* Set this to 1 to disable regulatory domain restrictions for channel tests. - * WARNING: This is for debuging only and has side effects (eg. scan takes too - * long and results timeouts). It's also illegal to tune to some of the - * supported frequencies in some countries, so use this at your own risk, - * you've been warned. */ +/* TODO: Clean up channel debuging -doesn't work anyway- and start + * working on reg. control code using all available eeprom information + * -rev. engineering needed- */ #define CHAN_DEBUG 0 #include <linux/io.h> #include <linux/types.h> #include <net/mac80211.h> -#include "hw.h" +/* RX/TX descriptor hw structs + * TODO: Driver part should only see sw structs */ +#include "desc.h" + +/* EEPROM structs/offsets + * TODO: Make a more generic struct (eg. add more stuff to ath5k_capabilities) + * and clean up common bits, then introduce set/get functions in eeprom.c */ +#include "eeprom.h" /* PCI IDs */ #define PCI_DEVICE_ID_ATHEROS_AR5210 0x0007 /* AR5210 */ @@ -87,7 +92,92 @@ ATH5K_PRINTK_LIMIT(_sc, KERN_ERR, _fmt, ##__VA_ARGS__) /* + * AR5K REGISTER ACCESS + */ + +/* Some macros to read/write fields */ + +/* First shift, then mask */ +#define AR5K_REG_SM(_val, _flags) \ + (((_val) << _flags##_S) & (_flags)) + +/* First mask, then shift */ +#define AR5K_REG_MS(_val, _flags) \ + (((_val) & (_flags)) >> _flags##_S) + +/* Some registers can hold multiple values of interest. For this + * reason when we want to write to these registers we must first + * retrieve the values which we do not want to clear (lets call this + * old_data) and then set the register with this and our new_value: + * ( old_data | new_value) */ +#define AR5K_REG_WRITE_BITS(ah, _reg, _flags, _val) \ + ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & ~(_flags)) | \ + (((_val) << _flags##_S) & (_flags)), _reg) + +#define AR5K_REG_MASKED_BITS(ah, _reg, _flags, _mask) \ + ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & \ + (_mask)) | (_flags), _reg) + +#define AR5K_REG_ENABLE_BITS(ah, _reg, _flags) \ + ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) | (_flags), _reg) + +#define AR5K_REG_DISABLE_BITS(ah, _reg, _flags) \ + ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) & ~(_flags), _reg) + +/* Access to PHY registers */ +#define AR5K_PHY_READ(ah, _reg) \ + ath5k_hw_reg_read(ah, (ah)->ah_phy + ((_reg) << 2)) + +#define AR5K_PHY_WRITE(ah, _reg, _val) \ + ath5k_hw_reg_write(ah, _val, (ah)->ah_phy + ((_reg) << 2)) + +/* Access QCU registers per queue */ +#define AR5K_REG_READ_Q(ah, _reg, _queue) \ + (ath5k_hw_reg_read(ah, _reg) & (1 << _queue)) \ + +#define AR5K_REG_WRITE_Q(ah, _reg, _queue) \ + ath5k_hw_reg_write(ah, (1 << _queue), _reg) + +#define AR5K_Q_ENABLE_BITS(_reg, _queue) do { \ + _reg |= 1 << _queue; \ +} while (0) + +#define AR5K_Q_DISABLE_BITS(_reg, _queue) do { \ + _reg &= ~(1 << _queue); \ +} while (0) + +/* Used while writing initvals */ +#define AR5K_REG_WAIT(_i) do { \ + if (_i % 64) \ + udelay(1); \ +} while (0) + +/* Register dumps are done per operation mode */ +#define AR5K_INI_RFGAIN_5GHZ 0 +#define AR5K_INI_RFGAIN_2GHZ 1 + +/* TODO: Clean this up */ +#define AR5K_INI_VAL_11A 0 +#define AR5K_INI_VAL_11A_TURBO 1 +#define AR5K_INI_VAL_11B 2 +#define AR5K_INI_VAL_11G 3 +#define AR5K_INI_VAL_11G_TURBO 4 +#define AR5K_INI_VAL_XR 0 +#define AR5K_INI_VAL_MAX 5 + +#define AR5K_RF5111_INI_RF_MAX_BANKS AR5K_MAX_RF_BANKS +#define AR5K_RF5112_INI_RF_MAX_BANKS AR5K_MAX_RF_BANKS + +/* Used for BSSID etc manipulation */ +#define AR5K_LOW_ID(_a)( \ +(_a)[0] | (_a)[1] << 8 | (_a)[2] << 16 | (_a)[3] << 24 \ +) + +#define AR5K_HIGH_ID(_a) ((_a)[4] | (_a)[5] << 8) + +/* * Some tuneable values (these should be changeable by the user) + * TODO: Make use of them and add more options OR use debug/configfs */ #define AR5K_TUNE_DMA_BEACON_RESP 2 #define AR5K_TUNE_SW_BEACON_RESP 10 @@ -98,13 +188,13 @@ #define AR5K_TUNE_REGISTER_TIMEOUT 20000 /* Register for RSSI threshold has a mask of 0xff, so 255 seems to * be the max value. */ -#define AR5K_TUNE_RSSI_THRES 129 +#define AR5K_TUNE_RSSI_THRES 129 /* This must be set when setting the RSSI threshold otherwise it can * prevent a reset. If AR5K_RSSI_THR is read after writing to it * the BMISS_THRES will be seen as 0, seems harware doesn't keep * track of it. Max value depends on harware. For AR5210 this is just 7. * For AR5211+ this seems to be up to 255. */ -#define AR5K_TUNE_BMISS_THRES 7 +#define AR5K_TUNE_BMISS_THRES 7 #define AR5K_TUNE_REGISTER_DWELL_TIME 20000 #define AR5K_TUNE_BEACON_INTERVAL 100 #define AR5K_TUNE_AIFS 2 @@ -123,6 +213,55 @@ #define AR5K_TUNE_ANT_DIVERSITY true #define AR5K_TUNE_HWTXTRIES 4 +#define AR5K_INIT_CARR_SENSE_EN 1 + +/*Swap RX/TX Descriptor for big endian archs*/ +#if defined(__BIG_ENDIAN) +#define AR5K_INIT_CFG ( \ + AR5K_CFG_SWTD | AR5K_CFG_SWRD \ +) +#else +#define AR5K_INIT_CFG 0x00000000 +#endif + +/* Initial values */ +#define AR5K_INIT_TX_LATENCY 502 +#define AR5K_INIT_USEC 39 +#define AR5K_INIT_USEC_TURBO 79 +#define AR5K_INIT_USEC_32 31 +#define AR5K_INIT_SLOT_TIME 396 +#define AR5K_INIT_SLOT_TIME_TURBO 480 +#define AR5K_INIT_ACK_CTS_TIMEOUT 1024 +#define AR5K_INIT_ACK_CTS_TIMEOUT_TURBO 0x08000800 +#define AR5K_INIT_PROG_IFS 920 +#define AR5K_INIT_PROG_IFS_TURBO 960 +#define AR5K_INIT_EIFS 3440 +#define AR5K_INIT_EIFS_TURBO 6880 +#define AR5K_INIT_SIFS 560 +#define AR5K_INIT_SIFS_TURBO 480 +#define AR5K_INIT_SH_RETRY 10 +#define AR5K_INIT_LG_RETRY AR5K_INIT_SH_RETRY +#define AR5K_INIT_SSH_RETRY 32 +#define AR5K_INIT_SLG_RETRY AR5K_INIT_SSH_RETRY +#define AR5K_INIT_TX_RETRY 10 + +#define AR5K_INIT_TRANSMIT_LATENCY ( \ + (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) | \ + (AR5K_INIT_USEC) \ +) +#define AR5K_INIT_TRANSMIT_LATENCY_TURBO ( \ + (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) | \ + (AR5K_INIT_USEC_TURBO) \ +) +#define AR5K_INIT_PROTO_TIME_CNTRL ( \ + (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS << 12) | \ + (AR5K_INIT_PROG_IFS) \ +) +#define AR5K_INIT_PROTO_TIME_CNTRL_TURBO ( \ + (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS_TURBO << 12) | \ + (AR5K_INIT_PROG_IFS_TURBO) \ +) + /* token to use for aifs, cwmin, cwmax in MadWiFi */ #define AR5K_TXQ_USEDEFAULT ((u32) -1) @@ -196,7 +335,6 @@ struct ath5k_srev_name { #define AR5K_SREV_RAD_5133 0xc0 /* MIMO found on 5418 */ /* IEEE defs */ - #define IEEE80211_MAX_LEN 2500 /* TODO add support to mac80211 for vendor-specific rates and modes */ @@ -268,16 +406,13 @@ enum ath5k_driver_mode { AR5K_MODE_MAX = 5 }; -/* adding this flag to rate_code enables short preamble, see ar5212_reg.h */ -#define AR5K_SET_SHORT_PREAMBLE 0x04 - /****************\ TX DEFINITIONS \****************/ /* - * TX Status + * TX Status descriptor */ struct ath5k_tx_status { u16 ts_seqnum; @@ -349,7 +484,6 @@ enum ath5k_tx_queue_id { AR5K_TX_QUEUE_ID_XR_DATA = 9, }; - /* * Flags to set hw queue's parameters... */ @@ -382,7 +516,8 @@ struct ath5k_txq_info { /* * Transmit packet types. - * These are not fully used inside OpenHAL yet + * used on tx control descriptor + * TODO: Use them inside base.c corectly */ enum ath5k_pkt_type { AR5K_PKT_TYPE_NORMAL = 0, @@ -425,7 +560,7 @@ enum ath5k_dmasize { \****************/ /* - * RX Status + * RX Status descriptor */ struct ath5k_rx_status { u16 rs_datalen; @@ -489,34 +624,59 @@ struct ath5k_beacon_state { #define TSF_TO_TU(_tsf) (u32)((_tsf) >> 10) +/*******************************\ + GAIN OPTIMIZATION DEFINITIONS +\*******************************/ + +enum ath5k_rfgain { + AR5K_RFGAIN_INACTIVE = 0, + AR5K_RFGAIN_READ_REQUESTED, + AR5K_RFGAIN_NEED_CHANGE, +}; + +#define AR5K_GAIN_CRN_FIX_BITS_5111 4 +#define AR5K_GAIN_CRN_FIX_BITS_5112 7 +#define AR5K_GAIN_CRN_MAX_FIX_BITS AR5K_GAIN_CRN_FIX_BITS_5112 +#define AR5K_GAIN_DYN_ADJUST_HI_MARGIN 15 +#define AR5K_GAIN_DYN_ADJUST_LO_MARGIN 20 +#define AR5K_GAIN_CCK_PROBE_CORR 5 +#define AR5K_GAIN_CCK_OFDM_GAIN_DELTA 15 +#define AR5K_GAIN_STEP_COUNT 10 +#define AR5K_GAIN_PARAM_TX_CLIP 0 +#define AR5K_GAIN_PARAM_PD_90 1 +#define AR5K_GAIN_PARAM_PD_84 2 +#define AR5K_GAIN_PARAM_GAIN_SEL 3 +#define AR5K_GAIN_PARAM_MIX_ORN 0 +#define AR5K_GAIN_PARAM_PD_138 1 +#define AR5K_GAIN_PARAM_PD_137 2 +#define AR5K_GAIN_PARAM_PD_136 3 +#define AR5K_GAIN_PARAM_PD_132 4 +#define AR5K_GAIN_PARAM_PD_131 5 +#define AR5K_GAIN_PARAM_PD_130 6 +#define AR5K_GAIN_CHECK_ADJUST(_g) \ + ((_g)->g_current <= (_g)->g_low || (_g)->g_current >= (_g)->g_high) + +struct ath5k_gain_opt_step { + s16 gos_param[AR5K_GAIN_CRN_MAX_FIX_BITS]; + s32 gos_gain; +}; + +struct ath5k_gain { + u32 g_step_idx; + u32 g_current; + u32 g_target; + u32 g_low; + u32 g_high; + u32 g_f_corr; + u32 g_active; + const struct ath5k_gain_opt_step *g_step; +}; + + /********************\ COMMON DEFINITIONS \********************/ -/* - * Atheros hardware descriptor - * This is read and written to by the hardware - */ -struct ath5k_desc { - u32 ds_link; /* physical address of the next descriptor */ - u32 ds_data; /* physical address of data buffer (skb) */ - - union { - struct ath5k_hw_5210_tx_desc ds_tx5210; - struct ath5k_hw_5212_tx_desc ds_tx5212; - struct ath5k_hw_all_rx_desc ds_rx; - } ud; -} __packed; - -#define AR5K_RXDESC_INTREQ 0x0020 - -#define AR5K_TXDESC_CLRDMASK 0x0001 -#define AR5K_TXDESC_NOACK 0x0002 /*[5211+]*/ -#define AR5K_TXDESC_RTSENA 0x0004 -#define AR5K_TXDESC_CTSENA 0x0008 -#define AR5K_TXDESC_INTREQ 0x0010 -#define AR5K_TXDESC_VEOL 0x0020 /*[5211+]*/ - #define AR5K_SLOT_TIME_9 396 #define AR5K_SLOT_TIME_20 880 #define AR5K_SLOT_TIME_MAX 0xffff @@ -548,15 +708,16 @@ struct ath5k_desc { #define CHANNEL_MODES CHANNEL_ALL /* - * Used internaly in OpenHAL (ar5211.c/ar5212.c - * for reset_tx_queue). Also see struct struct ieee80211_channel. + * Used internaly for reset_tx_queue). + * Also see struct struct ieee80211_channel. */ #define IS_CHAN_XR(_c) ((_c.hw_value & CHANNEL_XR) != 0) #define IS_CHAN_B(_c) ((_c.hw_value & CHANNEL_B) != 0) /* - * The following structure will be used to map 2GHz channels to + * The following structure is used to map 2GHz channels to * 5GHz Atheros channels. + * TODO: Clean up */ struct ath5k_athchan_2ghz { u32 a2_flags; @@ -564,9 +725,9 @@ struct ath5k_athchan_2ghz { }; -/* - * Rate definitions - */ +/******************\ + RATE DEFINITIONS +\******************/ /** * Seems the ar5xxx harware supports up to 32 rates, indexed by 1-32. @@ -618,6 +779,8 @@ struct ath5k_athchan_2ghz { #define ATH5K_RATE_CODE_XR_2M 0x06 #define ATH5K_RATE_CODE_XR_3M 0x01 +/* adding this flag to rate_code enables short preamble */ +#define AR5K_SET_SHORT_PREAMBLE 0x04 /* * Crypto definitions @@ -639,7 +802,6 @@ struct ath5k_athchan_2ghz { return (false); \ } while (0) - enum ath5k_ant_setting { AR5K_ANT_VARIABLE = 0, /* variable by programming */ AR5K_ANT_FIXED_A = 1, /* fixed to 11a frequencies */ @@ -750,7 +912,8 @@ enum ath5k_power_mode { /* * These match net80211 definitions (not used in - * d80211). + * mac80211). + * TODO: Clean this up */ #define AR5K_LED_INIT 0 /*IEEE80211_S_INIT*/ #define AR5K_LED_SCAN 1 /*IEEE80211_S_SCAN*/ @@ -766,7 +929,8 @@ enum ath5k_power_mode { /* * Chipset capabilities -see ath5k_hw_get_capability- * get_capability function is not yet fully implemented - * in OpenHAL so most of these don't work yet... + * in ath5k so most of these don't work yet... + * TODO: Implement these & merge with _TUNE_ stuff above */ enum ath5k_capability_type { AR5K_CAP_REG_DMN = 0, /* Used to get current reg. domain id */ @@ -835,6 +999,7 @@ struct ath5k_capabilities { #define AR5K_MAX_GPIO 10 #define AR5K_MAX_RF_BANKS 8 +/* TODO: Clean up and merge with ath5k_softc */ struct ath5k_hw { u32 ah_magic; @@ -927,11 +1092,13 @@ struct ath5k_hw { /* * Function pointers */ + int (*ah_setup_rx_desc)(struct ath5k_hw *ah, struct ath5k_desc *desc, + u32 size, unsigned int flags); int (*ah_setup_tx_desc)(struct ath5k_hw *, struct ath5k_desc *, unsigned int, unsigned int, enum ath5k_pkt_type, unsigned int, unsigned int, unsigned int, unsigned int, unsigned int, unsigned int, unsigned int, unsigned int); - int (*ah_setup_xtx_desc)(struct ath5k_hw *, struct ath5k_desc *, + int (*ah_setup_mrr_tx_desc)(struct ath5k_hw *, struct ath5k_desc *, unsigned int, unsigned int, unsigned int, unsigned int, unsigned int, unsigned int); int (*ah_proc_tx_desc)(struct ath5k_hw *, struct ath5k_desc *, @@ -944,33 +1111,38 @@ struct ath5k_hw { * Prototypes */ -/* General Functions */ -extern int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val, bool is_set); /* Attach/Detach Functions */ extern struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version); -extern const struct ath5k_rate_table *ath5k_hw_get_rate_table(struct ath5k_hw *ah, unsigned int mode); extern void ath5k_hw_detach(struct ath5k_hw *ah); + /* Reset Functions */ +extern int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial); extern int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, struct ieee80211_channel *channel, bool change_channel); /* Power management functions */ extern int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, bool set_chip, u16 sleep_duration); + /* DMA Related Functions */ -extern void ath5k_hw_start_rx(struct ath5k_hw *ah); +extern void ath5k_hw_start_rx_dma(struct ath5k_hw *ah); extern int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah); -extern u32 ath5k_hw_get_rx_buf(struct ath5k_hw *ah); -extern void ath5k_hw_put_rx_buf(struct ath5k_hw *ah, u32 phys_addr); -extern int ath5k_hw_tx_start(struct ath5k_hw *ah, unsigned int queue); +extern u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah); +extern void ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr); +extern int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue); extern int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue); -extern u32 ath5k_hw_get_tx_buf(struct ath5k_hw *ah, unsigned int queue); -extern int ath5k_hw_put_tx_buf(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr); +extern u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue); +extern int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, + u32 phys_addr); extern int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase); /* Interrupt handling */ extern bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah); extern int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask); -extern enum ath5k_int ath5k_hw_set_intr(struct ath5k_hw *ah, enum ath5k_int new_mask); +extern enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum +ath5k_int new_mask); extern void ath5k_hw_update_mib_counters(struct ath5k_hw *ah, struct ieee80211_low_level_stats *stats); + /* EEPROM access functions */ -extern int ath5k_hw_set_regdomain(struct ath5k_hw *ah, u16 regdomain); +extern int ath5k_eeprom_init(struct ath5k_hw *ah); +extern int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac); + /* Protocol Control Unit Functions */ extern int ath5k_hw_set_opmode(struct ath5k_hw *ah); /* BSSID Functions */ @@ -980,14 +1152,14 @@ extern void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc extern int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask); /* Receive start/stop functions */ extern void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah); -extern void ath5k_hw_stop_pcu_recv(struct ath5k_hw *ah); +extern void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah); /* RX Filter functions */ extern void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1); -extern int ath5k_hw_set_mcast_filterindex(struct ath5k_hw *ah, u32 index); +extern int ath5k_hw_set_mcast_filter_idx(struct ath5k_hw *ah, u32 index); extern int ath5k_hw_clear_mcast_filter_idx(struct ath5k_hw *ah, u32 index); extern u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah); extern void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter); -/* Beacon related functions */ +/* Beacon control functions */ extern u32 ath5k_hw_get_tsf32(struct ath5k_hw *ah); extern u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah); extern void ath5k_hw_reset_tsf(struct ath5k_hw *ah); @@ -1009,61 +1181,129 @@ extern int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry); extern int ath5k_hw_is_key_valid(struct ath5k_hw *ah, u16 entry); extern int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry, const struct ieee80211_key_conf *key, const u8 *mac); extern int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac); + /* Queue Control Unit, DFS Control Unit Functions */ -extern int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type, struct ath5k_txq_info *queue_info); -extern int ath5k_hw_setup_tx_queueprops(struct ath5k_hw *ah, int queue, const struct ath5k_txq_info *queue_info); extern int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, struct ath5k_txq_info *queue_info); +extern int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue, + const struct ath5k_txq_info *queue_info); +extern int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, + enum ath5k_tx_queue queue_type, + struct ath5k_txq_info *queue_info); +extern u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue); extern void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue); extern int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue); -extern u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue); -extern int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time); extern unsigned int ath5k_hw_get_slot_time(struct ath5k_hw *ah); +extern int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time); + /* Hardware Descriptor Functions */ -extern int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, u32 size, unsigned int flags); +extern int ath5k_hw_init_desc_functions(struct ath5k_hw *ah); + /* GPIO Functions */ extern void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state); -extern int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio); extern int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio); +extern int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio); extern u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio); extern int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val); extern void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, u32 interrupt_level); + /* Misc functions */ +int ath5k_hw_set_capabilities(struct ath5k_hw *ah); extern int ath5k_hw_get_capability(struct ath5k_hw *ah, enum ath5k_capability_type cap_type, u32 capability, u32 *result); - +extern int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid, u16 assoc_id); +extern int ath5k_hw_disable_pspoll(struct ath5k_hw *ah); /* Initial register settings functions */ extern int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel); + /* Initialize RF */ extern int ath5k_hw_rfregs(struct ath5k_hw *ah, struct ieee80211_channel *channel, unsigned int mode); extern int ath5k_hw_rfgain(struct ath5k_hw *ah, unsigned int freq); extern enum ath5k_rfgain ath5k_hw_get_rf_gain(struct ath5k_hw *ah); extern int ath5k_hw_set_rfgain_opt(struct ath5k_hw *ah); - - /* PHY/RF channel functions */ extern bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags); extern int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel); /* PHY calibration */ extern int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, struct ieee80211_channel *channel); -extern int ath5k_hw_phy_disable(struct ath5k_hw *ah); +extern int ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq); /* Misc PHY functions */ extern u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan); extern void ath5k_hw_set_def_antenna(struct ath5k_hw *ah, unsigned int ant); extern unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah); -extern int ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq); +extern int ath5k_hw_phy_disable(struct ath5k_hw *ah); /* TX power setup */ extern int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, unsigned int txpower); extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, unsigned int power); +/* + * Functions used internaly + */ + +/* + * Translate usec to hw clock units + */ +static inline unsigned int ath5k_hw_htoclock(unsigned int usec, bool turbo) +{ + return turbo ? (usec * 80) : (usec * 40); +} +/* + * Translate hw clock units to usec + */ +static inline unsigned int ath5k_hw_clocktoh(unsigned int clock, bool turbo) +{ + return turbo ? (clock / 80) : (clock / 40); +} + +/* + * Read from a register + */ static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg) { return ioread32(ah->ah_iobase + reg); } +/* + * Write to a register + */ static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg) { iowrite32(val, ah->ah_iobase + reg); } +#if defined(_ATH5K_RESET) || defined(_ATH5K_PHY) +/* + * Check if a register write has been completed + */ +static int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, + u32 val, bool is_set) +{ + int i; + u32 data; + + for (i = AR5K_TUNE_REGISTER_TIMEOUT; i > 0; i--) { + data = ath5k_hw_reg_read(ah, reg); + if (is_set && (data & flag)) + break; + else if ((data & flag) == val) + break; + udelay(15); + } + + return (i <= 0) ? -EAGAIN : 0; +} +#endif + +static inline u32 ath5k_hw_bitswap(u32 val, unsigned int bits) +{ + u32 retval = 0, bit, i; + + for (i = 0; i < bits; i++) { + bit = (val >> i) & 1; + retval = (retval << 1) | bit; + } + + return retval; +} + #endif diff --git a/drivers/net/wireless/ath5k/attach.c b/drivers/net/wireless/ath5k/attach.c new file mode 100644 index 000000000000..0eb2511fe147 --- /dev/null +++ b/drivers/net/wireless/ath5k/attach.c @@ -0,0 +1,315 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/*************************************\ +* Attach/Detach Functions and helpers * +\*************************************/ + +#include <linux/pci.h> +#include "ath5k.h" +#include "reg.h" +#include "debug.h" +#include "base.h" + +/** + * ath5k_hw_post - Power On Self Test helper function + * + * @ah: The &struct ath5k_hw + */ +static int ath5k_hw_post(struct ath5k_hw *ah) +{ + + int i, c; + u16 cur_reg; + u16 regs[2] = {AR5K_STA_ID0, AR5K_PHY(8)}; + u32 var_pattern; + u32 static_pattern[4] = { + 0x55555555, 0xaaaaaaaa, + 0x66666666, 0x99999999 + }; + u32 init_val; + u32 cur_val; + + for (c = 0; c < 2; c++) { + + cur_reg = regs[c]; + + /* Save previous value */ + init_val = ath5k_hw_reg_read(ah, cur_reg); + + for (i = 0; i < 256; i++) { + var_pattern = i << 16 | i; + ath5k_hw_reg_write(ah, var_pattern, cur_reg); + cur_val = ath5k_hw_reg_read(ah, cur_reg); + + if (cur_val != var_pattern) { + ATH5K_ERR(ah->ah_sc, "POST Failed !!!\n"); + return -EAGAIN; + } + + /* Found on ndiswrapper dumps */ + var_pattern = 0x0039080f; + ath5k_hw_reg_write(ah, var_pattern, cur_reg); + } + + for (i = 0; i < 4; i++) { + var_pattern = static_pattern[i]; + ath5k_hw_reg_write(ah, var_pattern, cur_reg); + cur_val = ath5k_hw_reg_read(ah, cur_reg); + + if (cur_val != var_pattern) { + ATH5K_ERR(ah->ah_sc, "POST Failed !!!\n"); + return -EAGAIN; + } + + /* Found on ndiswrapper dumps */ + var_pattern = 0x003b080f; + ath5k_hw_reg_write(ah, var_pattern, cur_reg); + } + + /* Restore previous value */ + ath5k_hw_reg_write(ah, init_val, cur_reg); + + } + + return 0; + +} + +/** + * ath5k_hw_attach - Check if hw is supported and init the needed structs + * + * @sc: The &struct ath5k_softc we got from the driver's attach function + * @mac_version: The mac version id (check out ath5k.h) based on pci id + * + * Check if the device is supported, perform a POST and initialize the needed + * structs. Returns -ENOMEM if we don't have memory for the needed structs, + * -ENODEV if the device is not supported or prints an error msg if something + * else went wrong. + */ +struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version) +{ + struct ath5k_hw *ah; + struct pci_dev *pdev = sc->pdev; + u8 mac[ETH_ALEN]; + int ret; + u32 srev; + + /*If we passed the test malloc a ath5k_hw struct*/ + ah = kzalloc(sizeof(struct ath5k_hw), GFP_KERNEL); + if (ah == NULL) { + ret = -ENOMEM; + ATH5K_ERR(sc, "out of memory\n"); + goto err; + } + + ah->ah_sc = sc; + ah->ah_iobase = sc->iobase; + + /* + * HW information + */ + ah->ah_op_mode = IEEE80211_IF_TYPE_STA; + ah->ah_radar.r_enabled = AR5K_TUNE_RADAR_ALERT; + ah->ah_turbo = false; + ah->ah_txpower.txp_tpc = AR5K_TUNE_TPC_TXPOWER; + ah->ah_imr = 0; + ah->ah_atim_window = 0; + ah->ah_aifs = AR5K_TUNE_AIFS; + ah->ah_cw_min = AR5K_TUNE_CWMIN; + ah->ah_limit_tx_retries = AR5K_INIT_TX_RETRY; + ah->ah_software_retry = false; + ah->ah_ant_diversity = AR5K_TUNE_ANT_DIVERSITY; + + /* + * Set the mac revision based on the pci id + */ + ah->ah_version = mac_version; + + /*Fill the ath5k_hw struct with the needed functions*/ + ret = ath5k_hw_init_desc_functions(ah); + if (ret) + goto err_free; + + /* Bring device out of sleep and reset it's units */ + ret = ath5k_hw_nic_wakeup(ah, CHANNEL_B, true); + if (ret) + goto err_free; + + /* Get MAC, PHY and RADIO revisions */ + srev = ath5k_hw_reg_read(ah, AR5K_SREV); + ah->ah_mac_srev = srev; + ah->ah_mac_version = AR5K_REG_MS(srev, AR5K_SREV_VER); + ah->ah_mac_revision = AR5K_REG_MS(srev, AR5K_SREV_REV); + ah->ah_phy_revision = ath5k_hw_reg_read(ah, AR5K_PHY_CHIP_ID) & + 0xffffffff; + ah->ah_radio_5ghz_revision = ath5k_hw_radio_revision(ah, + CHANNEL_5GHZ); + + if (ah->ah_version == AR5K_AR5210) + ah->ah_radio_2ghz_revision = 0; + else + ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah, + CHANNEL_2GHZ); + + /* Return on unsuported chips (unsupported eeprom etc) */ + if ((srev >= AR5K_SREV_VER_AR5416) && + (srev < AR5K_SREV_VER_AR2425)) { + ATH5K_ERR(sc, "Device not yet supported.\n"); + ret = -ENODEV; + goto err_free; + } else if (srev == AR5K_SREV_VER_AR2425) { + ATH5K_WARN(sc, "Support for RF2425 is under development.\n"); + } + + /* Identify single chip solutions */ + if (((srev <= AR5K_SREV_VER_AR5414) && + (srev >= AR5K_SREV_VER_AR2413)) || + (srev == AR5K_SREV_VER_AR2425)) { + ah->ah_single_chip = true; + } else { + ah->ah_single_chip = false; + } + + /* Single chip radio */ + if (ah->ah_radio_2ghz_revision == ah->ah_radio_5ghz_revision) + ah->ah_radio_2ghz_revision = 0; + + /* Identify the radio chip*/ + if (ah->ah_version == AR5K_AR5210) { + ah->ah_radio = AR5K_RF5110; + /* + * Register returns 0x0/0x04 for radio revision + * so ath5k_hw_radio_revision doesn't parse the value + * correctly. For now we are based on mac's srev to + * identify RF2425 radio. + */ + } else if (srev == AR5K_SREV_VER_AR2425) { + ah->ah_radio = AR5K_RF2425; + ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2425; + } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_5112) { + ah->ah_radio = AR5K_RF5111; + ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5111; + } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC0) { + ah->ah_radio = AR5K_RF5112; + ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112; + } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC1) { + ah->ah_radio = AR5K_RF2413; + ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2413; + } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC2) { + ah->ah_radio = AR5K_RF5413; + ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413; + } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_5133) { + /* AR5424 */ + if (srev >= AR5K_SREV_VER_AR5424) { + ah->ah_radio = AR5K_RF5413; + ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413; + /* AR2424 */ + } else { + ah->ah_radio = AR5K_RF2413; /* For testing */ + ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2413; + } + } + ah->ah_phy = AR5K_PHY(0); + + /* + * Write PCI-E power save settings + */ + if ((ah->ah_version == AR5K_AR5212) && (pdev->is_pcie)) { + ath5k_hw_reg_write(ah, 0x9248fc00, 0x4080); + ath5k_hw_reg_write(ah, 0x24924924, 0x4080); + ath5k_hw_reg_write(ah, 0x28000039, 0x4080); + ath5k_hw_reg_write(ah, 0x53160824, 0x4080); + ath5k_hw_reg_write(ah, 0xe5980579, 0x4080); + ath5k_hw_reg_write(ah, 0x001defff, 0x4080); + ath5k_hw_reg_write(ah, 0x1aaabe40, 0x4080); + ath5k_hw_reg_write(ah, 0xbe105554, 0x4080); + ath5k_hw_reg_write(ah, 0x000e3007, 0x4080); + ath5k_hw_reg_write(ah, 0x00000000, 0x4084); + } + + /* + * POST + */ + ret = ath5k_hw_post(ah); + if (ret) + goto err_free; + + /* Write AR5K_PCICFG_UNK on 2112B and later chips */ + if (ah->ah_radio_5ghz_revision > AR5K_SREV_RAD_2112B || + srev > AR5K_SREV_VER_AR2413) { + ath5k_hw_reg_write(ah, AR5K_PCICFG_UNK, AR5K_PCICFG); + } + + /* + * Get card capabilities, values, ... + */ + ret = ath5k_eeprom_init(ah); + if (ret) { + ATH5K_ERR(sc, "unable to init EEPROM\n"); + goto err_free; + } + + /* Get misc capabilities */ + ret = ath5k_hw_set_capabilities(ah); + if (ret) { + ATH5K_ERR(sc, "unable to get device capabilities: 0x%04x\n", + sc->pdev->device); + goto err_free; + } + + /* Get MAC address */ + ret = ath5k_eeprom_read_mac(ah, mac); + if (ret) { + ATH5K_ERR(sc, "unable to read address from EEPROM: 0x%04x\n", + sc->pdev->device); + goto err_free; + } + + ath5k_hw_set_lladdr(ah, mac); + /* Set BSSID to bcast address: ff:ff:ff:ff:ff:ff for now */ + memset(ah->ah_bssid, 0xff, ETH_ALEN); + ath5k_hw_set_associd(ah, ah->ah_bssid, 0); + ath5k_hw_set_opmode(ah); + + ath5k_hw_set_rfgain_opt(ah); + + return ah; +err_free: + kfree(ah); +err: + return ERR_PTR(ret); +} + +/** + * ath5k_hw_detach - Free the ath5k_hw struct + * + * @ah: The &struct ath5k_hw + */ +void ath5k_hw_detach(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + + __set_bit(ATH_STAT_INVALID, ah->ah_sc->status); + + if (ah->ah_rf_banks != NULL) + kfree(ah->ah_rf_banks); + + /* assume interrupts are down */ + kfree(ah); +} diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index bcec74e839e9..7989ab5c2bba 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -707,7 +707,7 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw) * return false w/o doing anything. MAC's that do * support it will return true w/o doing anything. */ - ret = ah->ah_setup_xtx_desc(ah, NULL, 0, 0, 0, 0, 0, 0); + ret = ah->ah_setup_mrr_tx_desc(ah, NULL, 0, 0, 0, 0, 0, 0); if (ret < 0) goto err; if (ret > 0) @@ -1137,7 +1137,7 @@ ath5k_rxbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) ds = bf->desc; ds->ds_link = bf->daddr; /* link to self */ ds->ds_data = bf->skbaddr; - ath5k_hw_setup_rx_desc(ah, ds, + ah->ah_setup_rx_desc(ah, ds, skb_tailroom(skb), /* buffer size */ 0); @@ -1188,12 +1188,12 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) list_add_tail(&bf->list, &txq->q); sc->tx_stats[txq->qnum].len++; if (txq->link == NULL) /* is this first packet? */ - ath5k_hw_put_tx_buf(ah, txq->qnum, bf->daddr); + ath5k_hw_set_txdp(ah, txq->qnum, bf->daddr); else /* no, so only link it */ *txq->link = bf->daddr; txq->link = &ds->ds_link; - ath5k_hw_tx_start(ah, txq->qnum); + ath5k_hw_start_tx_dma(ah, txq->qnum); mmiowb(); spin_unlock_bh(&txq->lock); @@ -1393,7 +1393,7 @@ ath5k_beaconq_config(struct ath5k_softc *sc) "beacon queueprops tqi_aifs:%d tqi_cw_min:%d tqi_cw_max:%d\n", qi.tqi_aifs, qi.tqi_cw_min, qi.tqi_cw_max); - ret = ath5k_hw_setup_tx_queueprops(ah, sc->bhalq, &qi); + ret = ath5k_hw_set_tx_queueprops(ah, sc->bhalq, &qi); if (ret) { ATH5K_ERR(sc, "%s: unable to update parameters for beacon " "hardware queue!\n", __func__); @@ -1442,14 +1442,14 @@ ath5k_txq_cleanup(struct ath5k_softc *sc) /* don't touch the hardware if marked invalid */ ath5k_hw_stop_tx_dma(ah, sc->bhalq); ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "beacon queue %x\n", - ath5k_hw_get_tx_buf(ah, sc->bhalq)); + ath5k_hw_get_txdp(ah, sc->bhalq)); for (i = 0; i < ARRAY_SIZE(sc->txqs); i++) if (sc->txqs[i].setup) { ath5k_hw_stop_tx_dma(ah, sc->txqs[i].qnum); ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "txq [%u] %x, " "link %p\n", sc->txqs[i].qnum, - ath5k_hw_get_tx_buf(ah, + ath5k_hw_get_txdp(ah, sc->txqs[i].qnum), sc->txqs[i].link); } @@ -1509,8 +1509,8 @@ ath5k_rx_start(struct ath5k_softc *sc) bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list); spin_unlock_bh(&sc->rxbuflock); - ath5k_hw_put_rx_buf(ah, bf->daddr); - ath5k_hw_start_rx(ah); /* enable recv descriptors */ + ath5k_hw_set_rxdp(ah, bf->daddr); + ath5k_hw_start_rx_dma(ah); /* enable recv descriptors */ ath5k_mode_setup(sc); /* set filters, etc. */ ath5k_hw_start_rx_pcu(ah); /* re-enable PCU/DMA engine */ @@ -1527,7 +1527,7 @@ ath5k_rx_stop(struct ath5k_softc *sc) { struct ath5k_hw *ah = sc->ah; - ath5k_hw_stop_pcu_recv(ah); /* disable PCU */ + ath5k_hw_stop_rx_pcu(ah); /* disable PCU */ ath5k_hw_set_rx_filter(ah, 0); /* clear recv filter */ ath5k_hw_stop_rx_dma(ah); /* disable DMA engine */ @@ -1976,8 +1976,8 @@ ath5k_beacon_send(struct ath5k_softc *sc) /* NB: hw still stops DMA, so proceed */ } - ath5k_hw_put_tx_buf(ah, sc->bhalq, bf->daddr); - ath5k_hw_tx_start(ah, sc->bhalq); + ath5k_hw_set_txdp(ah, sc->bhalq, bf->daddr); + ath5k_hw_start_tx_dma(ah, sc->bhalq); ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "TXDP[%u] = %llx (%p)\n", sc->bhalq, (unsigned long long)bf->daddr, bf->desc); @@ -2106,7 +2106,7 @@ ath5k_beacon_config(struct ath5k_softc *sc) { struct ath5k_hw *ah = sc->ah; - ath5k_hw_set_intr(ah, 0); + ath5k_hw_set_imr(ah, 0); sc->bmisscount = 0; sc->imask &= ~(AR5K_INT_BMISS | AR5K_INT_SWBA); @@ -2132,7 +2132,7 @@ ath5k_beacon_config(struct ath5k_softc *sc) } /* TODO else AP */ - ath5k_hw_set_intr(ah, sc->imask); + ath5k_hw_set_imr(ah, sc->imask); } @@ -2211,7 +2211,7 @@ ath5k_stop_locked(struct ath5k_softc *sc) if (!test_bit(ATH_STAT_INVALID, sc->status)) { ath5k_led_off(sc); - ath5k_hw_set_intr(ah, 0); + ath5k_hw_set_imr(ah, 0); synchronize_irq(sc->pdev->irq); } ath5k_txq_cleanup(sc); @@ -2604,7 +2604,7 @@ ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel) ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "resetting\n"); if (stop) { - ath5k_hw_set_intr(ah, 0); + ath5k_hw_set_imr(ah, 0); ath5k_txq_cleanup(sc); ath5k_rx_stop(sc); } diff --git a/drivers/net/wireless/ath5k/caps.c b/drivers/net/wireless/ath5k/caps.c new file mode 100644 index 000000000000..150f5ed204a0 --- /dev/null +++ b/drivers/net/wireless/ath5k/caps.c @@ -0,0 +1,193 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/**************\ +* Capabilities * +\**************/ + +#include "ath5k.h" +#include "reg.h" +#include "debug.h" +#include "base.h" + +/* + * Fill the capabilities struct + * TODO: Merge this with EEPROM code when we are done with it + */ +int ath5k_hw_set_capabilities(struct ath5k_hw *ah) +{ + u16 ee_header; + + ATH5K_TRACE(ah->ah_sc); + /* Capabilities stored in the EEPROM */ + ee_header = ah->ah_capabilities.cap_eeprom.ee_header; + + if (ah->ah_version == AR5K_AR5210) { + /* + * Set radio capabilities + * (The AR5110 only supports the middle 5GHz band) + */ + ah->ah_capabilities.cap_range.range_5ghz_min = 5120; + ah->ah_capabilities.cap_range.range_5ghz_max = 5430; + ah->ah_capabilities.cap_range.range_2ghz_min = 0; + ah->ah_capabilities.cap_range.range_2ghz_max = 0; + + /* Set supported modes */ + __set_bit(AR5K_MODE_11A, ah->ah_capabilities.cap_mode); + __set_bit(AR5K_MODE_11A_TURBO, ah->ah_capabilities.cap_mode); + } else { + /* + * XXX The tranceiver supports frequencies from 4920 to 6100GHz + * XXX and from 2312 to 2732GHz. There are problems with the + * XXX current ieee80211 implementation because the IEEE + * XXX channel mapping does not support negative channel + * XXX numbers (2312MHz is channel -19). Of course, this + * XXX doesn't matter because these channels are out of range + * XXX but some regulation domains like MKK (Japan) will + * XXX support frequencies somewhere around 4.8GHz. + */ + + /* + * Set radio capabilities + */ + + if (AR5K_EEPROM_HDR_11A(ee_header)) { + /* 4920 */ + ah->ah_capabilities.cap_range.range_5ghz_min = 5005; + ah->ah_capabilities.cap_range.range_5ghz_max = 6100; + + /* Set supported modes */ + __set_bit(AR5K_MODE_11A, + ah->ah_capabilities.cap_mode); + __set_bit(AR5K_MODE_11A_TURBO, + ah->ah_capabilities.cap_mode); + if (ah->ah_version == AR5K_AR5212) + __set_bit(AR5K_MODE_11G_TURBO, + ah->ah_capabilities.cap_mode); + } + + /* Enable 802.11b if a 2GHz capable radio (2111/5112) is + * connected */ + if (AR5K_EEPROM_HDR_11B(ee_header) || + AR5K_EEPROM_HDR_11G(ee_header)) { + /* 2312 */ + ah->ah_capabilities.cap_range.range_2ghz_min = 2412; + ah->ah_capabilities.cap_range.range_2ghz_max = 2732; + + if (AR5K_EEPROM_HDR_11B(ee_header)) + __set_bit(AR5K_MODE_11B, + ah->ah_capabilities.cap_mode); + + if (AR5K_EEPROM_HDR_11G(ee_header)) + __set_bit(AR5K_MODE_11G, + ah->ah_capabilities.cap_mode); + } + } + + /* GPIO */ + ah->ah_gpio_npins = AR5K_NUM_GPIO; + + /* Set number of supported TX queues */ + if (ah->ah_version == AR5K_AR5210) + ah->ah_capabilities.cap_queues.q_tx_num = + AR5K_NUM_TX_QUEUES_NOQCU; + else + ah->ah_capabilities.cap_queues.q_tx_num = AR5K_NUM_TX_QUEUES; + + return 0; +} + +/* Main function used by the driver part to check caps */ +int ath5k_hw_get_capability(struct ath5k_hw *ah, + enum ath5k_capability_type cap_type, + u32 capability, u32 *result) +{ + ATH5K_TRACE(ah->ah_sc); + + switch (cap_type) { + case AR5K_CAP_NUM_TXQUEUES: + if (result) { + if (ah->ah_version == AR5K_AR5210) + *result = AR5K_NUM_TX_QUEUES_NOQCU; + else + *result = AR5K_NUM_TX_QUEUES; + goto yes; + } + case AR5K_CAP_VEOL: + goto yes; + case AR5K_CAP_COMPRESSION: + if (ah->ah_version == AR5K_AR5212) + goto yes; + else + goto no; + case AR5K_CAP_BURST: + goto yes; + case AR5K_CAP_TPC: + goto yes; + case AR5K_CAP_BSSIDMASK: + if (ah->ah_version == AR5K_AR5212) + goto yes; + else + goto no; + case AR5K_CAP_XR: + if (ah->ah_version == AR5K_AR5212) + goto yes; + else + goto no; + default: + goto no; + } + +no: + return -EINVAL; +yes: + return 0; +} + +/* + * TODO: Following functions should be part of a new function + * set_capability + */ + +int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid, + u16 assoc_id) +{ + ATH5K_TRACE(ah->ah_sc); + + if (ah->ah_version == AR5K_AR5210) { + AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, + AR5K_STA_ID1_NO_PSPOLL | AR5K_STA_ID1_DEFAULT_ANTENNA); + return 0; + } + + return -EIO; +} + +int ath5k_hw_disable_pspoll(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + + if (ah->ah_version == AR5K_AR5210) { + AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, + AR5K_STA_ID1_NO_PSPOLL | AR5K_STA_ID1_DEFAULT_ANTENNA); + return 0; + } + + return -EIO; +} diff --git a/drivers/net/wireless/ath5k/debug.c b/drivers/net/wireless/ath5k/debug.c index 6fa6c8e04ff0..8f92d670f614 100644 --- a/drivers/net/wireless/ath5k/debug.c +++ b/drivers/net/wireless/ath5k/debug.c @@ -58,8 +58,8 @@ * THE POSSIBILITY OF SUCH DAMAGES. */ -#include "debug.h" #include "base.h" +#include "debug.h" static unsigned int ath5k_debug; module_param_named(debug, ath5k_debug, uint, 0); @@ -525,7 +525,7 @@ ath5k_debug_printrxbuffs(struct ath5k_softc *sc, struct ath5k_hw *ah) return; printk(KERN_DEBUG "rx queue %x, link %p\n", - ath5k_hw_get_rx_buf(ah), sc->rxlink); + ath5k_hw_get_rxdp(ah), sc->rxlink); spin_lock_bh(&sc->rxbuflock); list_for_each_entry(bf, &sc->rxbuf, list) { diff --git a/drivers/net/wireless/ath5k/desc.c b/drivers/net/wireless/ath5k/desc.c new file mode 100644 index 000000000000..d45b90a6e06c --- /dev/null +++ b/drivers/net/wireless/ath5k/desc.c @@ -0,0 +1,667 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2007-2008 Pavel Roskin <proski@gnu.org> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/******************************\ + Hardware Descriptor Functions +\******************************/ + +#include "ath5k.h" +#include "reg.h" +#include "debug.h" +#include "base.h" + +/* + * TX Descriptors + */ + +/* + * Initialize the 2-word tx control descriptor on 5210/5211 + */ +static int +ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, + unsigned int pkt_len, unsigned int hdr_len, enum ath5k_pkt_type type, + unsigned int tx_power, unsigned int tx_rate0, unsigned int tx_tries0, + unsigned int key_index, unsigned int antenna_mode, unsigned int flags, + unsigned int rtscts_rate, unsigned int rtscts_duration) +{ + u32 frame_type; + struct ath5k_hw_2w_tx_ctl *tx_ctl; + unsigned int frame_len; + + tx_ctl = &desc->ud.ds_tx5210.tx_ctl; + + /* + * Validate input + * - Zero retries don't make sense. + * - A zero rate will put the HW into a mode where it continously sends + * noise on the channel, so it is important to avoid this. + */ + if (unlikely(tx_tries0 == 0)) { + ATH5K_ERR(ah->ah_sc, "zero retries\n"); + WARN_ON(1); + return -EINVAL; + } + if (unlikely(tx_rate0 == 0)) { + ATH5K_ERR(ah->ah_sc, "zero rate\n"); + WARN_ON(1); + return -EINVAL; + } + + /* Clear descriptor */ + memset(&desc->ud.ds_tx5210, 0, sizeof(struct ath5k_hw_5210_tx_desc)); + + /* Setup control descriptor */ + + /* Verify and set frame length */ + + /* remove padding we might have added before */ + frame_len = pkt_len - (hdr_len & 3) + FCS_LEN; + + if (frame_len & ~AR5K_2W_TX_DESC_CTL0_FRAME_LEN) + return -EINVAL; + + tx_ctl->tx_control_0 = frame_len & AR5K_2W_TX_DESC_CTL0_FRAME_LEN; + + /* Verify and set buffer length */ + + /* NB: beacon's BufLen must be a multiple of 4 bytes */ + if (type == AR5K_PKT_TYPE_BEACON) + pkt_len = roundup(pkt_len, 4); + + if (pkt_len & ~AR5K_2W_TX_DESC_CTL1_BUF_LEN) + return -EINVAL; + + tx_ctl->tx_control_1 = pkt_len & AR5K_2W_TX_DESC_CTL1_BUF_LEN; + + /* + * Verify and set header length + * XXX: I only found that on 5210 code, does it work on 5211 ? + */ + if (ah->ah_version == AR5K_AR5210) { + if (hdr_len & ~AR5K_2W_TX_DESC_CTL0_HEADER_LEN) + return -EINVAL; + tx_ctl->tx_control_0 |= + AR5K_REG_SM(hdr_len, AR5K_2W_TX_DESC_CTL0_HEADER_LEN); + } + + /*Diferences between 5210-5211*/ + if (ah->ah_version == AR5K_AR5210) { + switch (type) { + case AR5K_PKT_TYPE_BEACON: + case AR5K_PKT_TYPE_PROBE_RESP: + frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_NO_DELAY; + case AR5K_PKT_TYPE_PIFS: + frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_PIFS; + default: + frame_type = type /*<< 2 ?*/; + } + + tx_ctl->tx_control_0 |= + AR5K_REG_SM(frame_type, AR5K_2W_TX_DESC_CTL0_FRAME_TYPE) | + AR5K_REG_SM(tx_rate0, AR5K_2W_TX_DESC_CTL0_XMIT_RATE); + + } else { + tx_ctl->tx_control_0 |= + AR5K_REG_SM(tx_rate0, AR5K_2W_TX_DESC_CTL0_XMIT_RATE) | + AR5K_REG_SM(antenna_mode, + AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT); + tx_ctl->tx_control_1 |= + AR5K_REG_SM(type, AR5K_2W_TX_DESC_CTL1_FRAME_TYPE); + } +#define _TX_FLAGS(_c, _flag) \ + if (flags & AR5K_TXDESC_##_flag) { \ + tx_ctl->tx_control_##_c |= \ + AR5K_2W_TX_DESC_CTL##_c##_##_flag; \ + } + + _TX_FLAGS(0, CLRDMASK); + _TX_FLAGS(0, VEOL); + _TX_FLAGS(0, INTREQ); + _TX_FLAGS(0, RTSENA); + _TX_FLAGS(1, NOACK); + +#undef _TX_FLAGS + + /* + * WEP crap + */ + if (key_index != AR5K_TXKEYIX_INVALID) { + tx_ctl->tx_control_0 |= + AR5K_2W_TX_DESC_CTL0_ENCRYPT_KEY_VALID; + tx_ctl->tx_control_1 |= + AR5K_REG_SM(key_index, + AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX); + } + + /* + * RTS/CTS Duration [5210 ?] + */ + if ((ah->ah_version == AR5K_AR5210) && + (flags & (AR5K_TXDESC_RTSENA | AR5K_TXDESC_CTSENA))) + tx_ctl->tx_control_1 |= rtscts_duration & + AR5K_2W_TX_DESC_CTL1_RTS_DURATION; + + return 0; +} + +/* + * Initialize the 4-word tx control descriptor on 5212 + */ +static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *ah, + struct ath5k_desc *desc, unsigned int pkt_len, unsigned int hdr_len, + enum ath5k_pkt_type type, unsigned int tx_power, unsigned int tx_rate0, + unsigned int tx_tries0, unsigned int key_index, + unsigned int antenna_mode, unsigned int flags, + unsigned int rtscts_rate, + unsigned int rtscts_duration) +{ + struct ath5k_hw_4w_tx_ctl *tx_ctl; + unsigned int frame_len; + + ATH5K_TRACE(ah->ah_sc); + tx_ctl = &desc->ud.ds_tx5212.tx_ctl; + + /* + * Validate input + * - Zero retries don't make sense. + * - A zero rate will put the HW into a mode where it continously sends + * noise on the channel, so it is important to avoid this. + */ + if (unlikely(tx_tries0 == 0)) { + ATH5K_ERR(ah->ah_sc, "zero retries\n"); + WARN_ON(1); + return -EINVAL; + } + if (unlikely(tx_rate0 == 0)) { + ATH5K_ERR(ah->ah_sc, "zero rate\n"); + WARN_ON(1); + return -EINVAL; + } + + /* Clear descriptor */ + memset(&desc->ud.ds_tx5212, 0, sizeof(struct ath5k_hw_5212_tx_desc)); + + /* Setup control descriptor */ + + /* Verify and set frame length */ + + /* remove padding we might have added before */ + frame_len = pkt_len - (hdr_len & 3) + FCS_LEN; + + if (frame_len & ~AR5K_4W_TX_DESC_CTL0_FRAME_LEN) + return -EINVAL; + + tx_ctl->tx_control_0 = frame_len & AR5K_4W_TX_DESC_CTL0_FRAME_LEN; + + /* Verify and set buffer length */ + + /* NB: beacon's BufLen must be a multiple of 4 bytes */ + if (type == AR5K_PKT_TYPE_BEACON) + pkt_len = roundup(pkt_len, 4); + + if (pkt_len & ~AR5K_4W_TX_DESC_CTL1_BUF_LEN) + return -EINVAL; + + tx_ctl->tx_control_1 = pkt_len & AR5K_4W_TX_DESC_CTL1_BUF_LEN; + + tx_ctl->tx_control_0 |= + AR5K_REG_SM(tx_power, AR5K_4W_TX_DESC_CTL0_XMIT_POWER) | + AR5K_REG_SM(antenna_mode, AR5K_4W_TX_DESC_CTL0_ANT_MODE_XMIT); + tx_ctl->tx_control_1 |= AR5K_REG_SM(type, + AR5K_4W_TX_DESC_CTL1_FRAME_TYPE); + tx_ctl->tx_control_2 = AR5K_REG_SM(tx_tries0 + AR5K_TUNE_HWTXTRIES, + AR5K_4W_TX_DESC_CTL2_XMIT_TRIES0); + tx_ctl->tx_control_3 = tx_rate0 & AR5K_4W_TX_DESC_CTL3_XMIT_RATE0; + +#define _TX_FLAGS(_c, _flag) \ + if (flags & AR5K_TXDESC_##_flag) { \ + tx_ctl->tx_control_##_c |= \ + AR5K_4W_TX_DESC_CTL##_c##_##_flag; \ + } + + _TX_FLAGS(0, CLRDMASK); + _TX_FLAGS(0, VEOL); + _TX_FLAGS(0, INTREQ); + _TX_FLAGS(0, RTSENA); + _TX_FLAGS(0, CTSENA); + _TX_FLAGS(1, NOACK); + +#undef _TX_FLAGS + + /* + * WEP crap + */ + if (key_index != AR5K_TXKEYIX_INVALID) { + tx_ctl->tx_control_0 |= AR5K_4W_TX_DESC_CTL0_ENCRYPT_KEY_VALID; + tx_ctl->tx_control_1 |= AR5K_REG_SM(key_index, + AR5K_4W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX); + } + + /* + * RTS/CTS + */ + if (flags & (AR5K_TXDESC_RTSENA | AR5K_TXDESC_CTSENA)) { + if ((flags & AR5K_TXDESC_RTSENA) && + (flags & AR5K_TXDESC_CTSENA)) + return -EINVAL; + tx_ctl->tx_control_2 |= rtscts_duration & + AR5K_4W_TX_DESC_CTL2_RTS_DURATION; + tx_ctl->tx_control_3 |= AR5K_REG_SM(rtscts_rate, + AR5K_4W_TX_DESC_CTL3_RTS_CTS_RATE); + } + + return 0; +} + +/* + * Initialize a 4-word multi rate retry tx control descriptor on 5212 + */ +static int +ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, + unsigned int tx_rate1, u_int tx_tries1, u_int tx_rate2, + u_int tx_tries2, unsigned int tx_rate3, u_int tx_tries3) +{ + struct ath5k_hw_4w_tx_ctl *tx_ctl; + + /* + * Rates can be 0 as long as the retry count is 0 too. + * A zero rate and nonzero retry count will put the HW into a mode where + * it continously sends noise on the channel, so it is important to + * avoid this. + */ + if (unlikely((tx_rate1 == 0 && tx_tries1 != 0) || + (tx_rate2 == 0 && tx_tries2 != 0) || + (tx_rate3 == 0 && tx_tries3 != 0))) { + ATH5K_ERR(ah->ah_sc, "zero rate\n"); + WARN_ON(1); + return -EINVAL; + } + + if (ah->ah_version == AR5K_AR5212) { + tx_ctl = &desc->ud.ds_tx5212.tx_ctl; + +#define _XTX_TRIES(_n) \ + if (tx_tries##_n) { \ + tx_ctl->tx_control_2 |= \ + AR5K_REG_SM(tx_tries##_n, \ + AR5K_4W_TX_DESC_CTL2_XMIT_TRIES##_n); \ + tx_ctl->tx_control_3 |= \ + AR5K_REG_SM(tx_rate##_n, \ + AR5K_4W_TX_DESC_CTL3_XMIT_RATE##_n); \ + } + + _XTX_TRIES(1); + _XTX_TRIES(2); + _XTX_TRIES(3); + +#undef _XTX_TRIES + + return 1; + } + + return 0; +} + +/* + * Proccess the tx status descriptor on 5210/5211 + */ +static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *ah, + struct ath5k_desc *desc, struct ath5k_tx_status *ts) +{ + struct ath5k_hw_2w_tx_ctl *tx_ctl; + struct ath5k_hw_tx_status *tx_status; + + ATH5K_TRACE(ah->ah_sc); + + tx_ctl = &desc->ud.ds_tx5210.tx_ctl; + tx_status = &desc->ud.ds_tx5210.tx_stat; + + /* No frame has been send or error */ + if (unlikely((tx_status->tx_status_1 & AR5K_DESC_TX_STATUS1_DONE) == 0)) + return -EINPROGRESS; + + /* + * Get descriptor status + */ + ts->ts_tstamp = AR5K_REG_MS(tx_status->tx_status_0, + AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP); + ts->ts_shortretry = AR5K_REG_MS(tx_status->tx_status_0, + AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT); + ts->ts_longretry = AR5K_REG_MS(tx_status->tx_status_0, + AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT); + /*TODO: ts->ts_virtcol + test*/ + ts->ts_seqnum = AR5K_REG_MS(tx_status->tx_status_1, + AR5K_DESC_TX_STATUS1_SEQ_NUM); + ts->ts_rssi = AR5K_REG_MS(tx_status->tx_status_1, + AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH); + ts->ts_antenna = 1; + ts->ts_status = 0; + ts->ts_rate = AR5K_REG_MS(tx_ctl->tx_control_0, + AR5K_2W_TX_DESC_CTL0_XMIT_RATE); + + if (!(tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK)) { + if (tx_status->tx_status_0 & + AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES) + ts->ts_status |= AR5K_TXERR_XRETRY; + + if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN) + ts->ts_status |= AR5K_TXERR_FIFO; + + if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FILTERED) + ts->ts_status |= AR5K_TXERR_FILT; + } + + return 0; +} + +/* + * Proccess a tx status descriptor on 5212 + */ +static int ath5k_hw_proc_4word_tx_status(struct ath5k_hw *ah, + struct ath5k_desc *desc, struct ath5k_tx_status *ts) +{ + struct ath5k_hw_4w_tx_ctl *tx_ctl; + struct ath5k_hw_tx_status *tx_status; + + ATH5K_TRACE(ah->ah_sc); + + tx_ctl = &desc->ud.ds_tx5212.tx_ctl; + tx_status = &desc->ud.ds_tx5212.tx_stat; + + /* No frame has been send or error */ + if (unlikely(!(tx_status->tx_status_1 & AR5K_DESC_TX_STATUS1_DONE))) + return -EINPROGRESS; + + /* + * Get descriptor status + */ + ts->ts_tstamp = AR5K_REG_MS(tx_status->tx_status_0, + AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP); + ts->ts_shortretry = AR5K_REG_MS(tx_status->tx_status_0, + AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT); + ts->ts_longretry = AR5K_REG_MS(tx_status->tx_status_0, + AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT); + ts->ts_seqnum = AR5K_REG_MS(tx_status->tx_status_1, + AR5K_DESC_TX_STATUS1_SEQ_NUM); + ts->ts_rssi = AR5K_REG_MS(tx_status->tx_status_1, + AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH); + ts->ts_antenna = (tx_status->tx_status_1 & + AR5K_DESC_TX_STATUS1_XMIT_ANTENNA) ? 2 : 1; + ts->ts_status = 0; + + switch (AR5K_REG_MS(tx_status->tx_status_1, + AR5K_DESC_TX_STATUS1_FINAL_TS_INDEX)) { + case 0: + ts->ts_rate = tx_ctl->tx_control_3 & + AR5K_4W_TX_DESC_CTL3_XMIT_RATE0; + break; + case 1: + ts->ts_rate = AR5K_REG_MS(tx_ctl->tx_control_3, + AR5K_4W_TX_DESC_CTL3_XMIT_RATE1); + ts->ts_longretry += AR5K_REG_MS(tx_ctl->tx_control_2, + AR5K_4W_TX_DESC_CTL2_XMIT_TRIES1); + break; + case 2: + ts->ts_rate = AR5K_REG_MS(tx_ctl->tx_control_3, + AR5K_4W_TX_DESC_CTL3_XMIT_RATE2); + ts->ts_longretry += AR5K_REG_MS(tx_ctl->tx_control_2, + AR5K_4W_TX_DESC_CTL2_XMIT_TRIES2); + break; + case 3: + ts->ts_rate = AR5K_REG_MS(tx_ctl->tx_control_3, + AR5K_4W_TX_DESC_CTL3_XMIT_RATE3); + ts->ts_longretry += AR5K_REG_MS(tx_ctl->tx_control_2, + AR5K_4W_TX_DESC_CTL2_XMIT_TRIES3); + break; + } + + /* TX error */ + if (!(tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK)) { + if (tx_status->tx_status_0 & + AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES) + ts->ts_status |= AR5K_TXERR_XRETRY; + + if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN) + ts->ts_status |= AR5K_TXERR_FIFO; + + if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FILTERED) + ts->ts_status |= AR5K_TXERR_FILT; + } + + return 0; +} + +/* + * RX Descriptors + */ + +/* + * Initialize an rx control descriptor + */ +static int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, + u32 size, unsigned int flags) +{ + struct ath5k_hw_rx_ctl *rx_ctl; + + ATH5K_TRACE(ah->ah_sc); + rx_ctl = &desc->ud.ds_rx.rx_ctl; + + /* + * Clear the descriptor + * If we don't clean the status descriptor, + * while scanning we get too many results, + * most of them virtual, after some secs + * of scanning system hangs. M.F. + */ + memset(&desc->ud.ds_rx, 0, sizeof(struct ath5k_hw_all_rx_desc)); + + /* Setup descriptor */ + rx_ctl->rx_control_1 = size & AR5K_DESC_RX_CTL1_BUF_LEN; + if (unlikely(rx_ctl->rx_control_1 != size)) + return -EINVAL; + + if (flags & AR5K_RXDESC_INTREQ) + rx_ctl->rx_control_1 |= AR5K_DESC_RX_CTL1_INTREQ; + + return 0; +} + +/* + * Proccess the rx status descriptor on 5210/5211 + */ +static int ath5k_hw_proc_5210_rx_status(struct ath5k_hw *ah, + struct ath5k_desc *desc, struct ath5k_rx_status *rs) +{ + struct ath5k_hw_rx_status *rx_status; + + rx_status = &desc->ud.ds_rx.u.rx_stat; + + /* No frame received / not ready */ + if (unlikely(!(rx_status->rx_status_1 & + AR5K_5210_RX_DESC_STATUS1_DONE))) + return -EINPROGRESS; + + /* + * Frame receive status + */ + rs->rs_datalen = rx_status->rx_status_0 & + AR5K_5210_RX_DESC_STATUS0_DATA_LEN; + rs->rs_rssi = AR5K_REG_MS(rx_status->rx_status_0, + AR5K_5210_RX_DESC_STATUS0_RECEIVE_SIGNAL); + rs->rs_rate = AR5K_REG_MS(rx_status->rx_status_0, + AR5K_5210_RX_DESC_STATUS0_RECEIVE_RATE); + rs->rs_antenna = rx_status->rx_status_0 & + AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANTENNA; + rs->rs_more = rx_status->rx_status_0 & + AR5K_5210_RX_DESC_STATUS0_MORE; + /* TODO: this timestamp is 13 bit, later on we assume 15 bit */ + rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1, + AR5K_5210_RX_DESC_STATUS1_RECEIVE_TIMESTAMP); + rs->rs_status = 0; + rs->rs_phyerr = 0; + + /* + * Key table status + */ + if (rx_status->rx_status_1 & AR5K_5210_RX_DESC_STATUS1_KEY_INDEX_VALID) + rs->rs_keyix = AR5K_REG_MS(rx_status->rx_status_1, + AR5K_5210_RX_DESC_STATUS1_KEY_INDEX); + else + rs->rs_keyix = AR5K_RXKEYIX_INVALID; + + /* + * Receive/descriptor errors + */ + if (!(rx_status->rx_status_1 & + AR5K_5210_RX_DESC_STATUS1_FRAME_RECEIVE_OK)) { + if (rx_status->rx_status_1 & + AR5K_5210_RX_DESC_STATUS1_CRC_ERROR) + rs->rs_status |= AR5K_RXERR_CRC; + + if (rx_status->rx_status_1 & + AR5K_5210_RX_DESC_STATUS1_FIFO_OVERRUN) + rs->rs_status |= AR5K_RXERR_FIFO; + + if (rx_status->rx_status_1 & + AR5K_5210_RX_DESC_STATUS1_PHY_ERROR) { + rs->rs_status |= AR5K_RXERR_PHY; + rs->rs_phyerr |= AR5K_REG_MS(rx_status->rx_status_1, + AR5K_5210_RX_DESC_STATUS1_PHY_ERROR); + } + + if (rx_status->rx_status_1 & + AR5K_5210_RX_DESC_STATUS1_DECRYPT_CRC_ERROR) + rs->rs_status |= AR5K_RXERR_DECRYPT; + } + + return 0; +} + +/* + * Proccess the rx status descriptor on 5212 + */ +static int ath5k_hw_proc_5212_rx_status(struct ath5k_hw *ah, + struct ath5k_desc *desc, struct ath5k_rx_status *rs) +{ + struct ath5k_hw_rx_status *rx_status; + struct ath5k_hw_rx_error *rx_err; + + ATH5K_TRACE(ah->ah_sc); + rx_status = &desc->ud.ds_rx.u.rx_stat; + + /* Overlay on error */ + rx_err = &desc->ud.ds_rx.u.rx_err; + + /* No frame received / not ready */ + if (unlikely(!(rx_status->rx_status_1 & + AR5K_5212_RX_DESC_STATUS1_DONE))) + return -EINPROGRESS; + + /* + * Frame receive status + */ + rs->rs_datalen = rx_status->rx_status_0 & + AR5K_5212_RX_DESC_STATUS0_DATA_LEN; + rs->rs_rssi = AR5K_REG_MS(rx_status->rx_status_0, + AR5K_5212_RX_DESC_STATUS0_RECEIVE_SIGNAL); + rs->rs_rate = AR5K_REG_MS(rx_status->rx_status_0, + AR5K_5212_RX_DESC_STATUS0_RECEIVE_RATE); + rs->rs_antenna = rx_status->rx_status_0 & + AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA; + rs->rs_more = rx_status->rx_status_0 & + AR5K_5212_RX_DESC_STATUS0_MORE; + rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1, + AR5K_5212_RX_DESC_STATUS1_RECEIVE_TIMESTAMP); + rs->rs_status = 0; + rs->rs_phyerr = 0; + + /* + * Key table status + */ + if (rx_status->rx_status_1 & AR5K_5212_RX_DESC_STATUS1_KEY_INDEX_VALID) + rs->rs_keyix = AR5K_REG_MS(rx_status->rx_status_1, + AR5K_5212_RX_DESC_STATUS1_KEY_INDEX); + else + rs->rs_keyix = AR5K_RXKEYIX_INVALID; + + /* + * Receive/descriptor errors + */ + if (!(rx_status->rx_status_1 & + AR5K_5212_RX_DESC_STATUS1_FRAME_RECEIVE_OK)) { + if (rx_status->rx_status_1 & + AR5K_5212_RX_DESC_STATUS1_CRC_ERROR) + rs->rs_status |= AR5K_RXERR_CRC; + + if (rx_status->rx_status_1 & + AR5K_5212_RX_DESC_STATUS1_PHY_ERROR) { + rs->rs_status |= AR5K_RXERR_PHY; + rs->rs_phyerr |= AR5K_REG_MS(rx_err->rx_error_1, + AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE); + } + + if (rx_status->rx_status_1 & + AR5K_5212_RX_DESC_STATUS1_DECRYPT_CRC_ERROR) + rs->rs_status |= AR5K_RXERR_DECRYPT; + + if (rx_status->rx_status_1 & + AR5K_5212_RX_DESC_STATUS1_MIC_ERROR) + rs->rs_status |= AR5K_RXERR_MIC; + } + + return 0; +} + +/* + * Init function pointers inside ath5k_hw struct + */ +int ath5k_hw_init_desc_functions(struct ath5k_hw *ah) +{ + + if (ah->ah_version != AR5K_AR5210 && + ah->ah_version != AR5K_AR5211 && + ah->ah_version != AR5K_AR5212) + return -ENOTSUPP; + + /* XXX: What is this magic value and where is it used ? */ + if (ah->ah_version == AR5K_AR5212) + ah->ah_magic = AR5K_EEPROM_MAGIC_5212; + else if (ah->ah_version == AR5K_AR5211) + ah->ah_magic = AR5K_EEPROM_MAGIC_5211; + + if (ah->ah_version == AR5K_AR5212) { + ah->ah_setup_rx_desc = ath5k_hw_setup_rx_desc; + ah->ah_setup_tx_desc = ath5k_hw_setup_4word_tx_desc; + ah->ah_setup_mrr_tx_desc = ath5k_hw_setup_mrr_tx_desc; + ah->ah_proc_tx_desc = ath5k_hw_proc_4word_tx_status; + } else { + ah->ah_setup_rx_desc = ath5k_hw_setup_rx_desc; + ah->ah_setup_tx_desc = ath5k_hw_setup_2word_tx_desc; + ah->ah_setup_mrr_tx_desc = ath5k_hw_setup_mrr_tx_desc; + ah->ah_proc_tx_desc = ath5k_hw_proc_2word_tx_status; + } + + if (ah->ah_version == AR5K_AR5212) + ah->ah_proc_rx_desc = ath5k_hw_proc_5212_rx_status; + else if (ah->ah_version <= AR5K_AR5211) + ah->ah_proc_rx_desc = ath5k_hw_proc_5210_rx_status; + + return 0; +} + diff --git a/drivers/net/wireless/ath5k/hw.h b/drivers/net/wireless/ath5k/desc.h index 64fca8dcb386..56158c804e3e 100644 --- a/drivers/net/wireless/ath5k/hw.h +++ b/drivers/net/wireless/ath5k/desc.h @@ -1,8 +1,6 @@ /* - * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org> - * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com> - * Copyright (c) 2007 Matthew W. S. Bell <mentor@madwifi.org> - * Copyright (c) 2007 Luis Rodriguez <mcgrof@winlab.rutgers.edu> + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -15,159 +13,9 @@ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * */ -#include <linux/delay.h> - -/* - * Gain settings - */ - -enum ath5k_rfgain { - AR5K_RFGAIN_INACTIVE = 0, - AR5K_RFGAIN_READ_REQUESTED, - AR5K_RFGAIN_NEED_CHANGE, -}; - -#define AR5K_GAIN_CRN_FIX_BITS_5111 4 -#define AR5K_GAIN_CRN_FIX_BITS_5112 7 -#define AR5K_GAIN_CRN_MAX_FIX_BITS AR5K_GAIN_CRN_FIX_BITS_5112 -#define AR5K_GAIN_DYN_ADJUST_HI_MARGIN 15 -#define AR5K_GAIN_DYN_ADJUST_LO_MARGIN 20 -#define AR5K_GAIN_CCK_PROBE_CORR 5 -#define AR5K_GAIN_CCK_OFDM_GAIN_DELTA 15 -#define AR5K_GAIN_STEP_COUNT 10 -#define AR5K_GAIN_PARAM_TX_CLIP 0 -#define AR5K_GAIN_PARAM_PD_90 1 -#define AR5K_GAIN_PARAM_PD_84 2 -#define AR5K_GAIN_PARAM_GAIN_SEL 3 -#define AR5K_GAIN_PARAM_MIX_ORN 0 -#define AR5K_GAIN_PARAM_PD_138 1 -#define AR5K_GAIN_PARAM_PD_137 2 -#define AR5K_GAIN_PARAM_PD_136 3 -#define AR5K_GAIN_PARAM_PD_132 4 -#define AR5K_GAIN_PARAM_PD_131 5 -#define AR5K_GAIN_PARAM_PD_130 6 -#define AR5K_GAIN_CHECK_ADJUST(_g) \ - ((_g)->g_current <= (_g)->g_low || (_g)->g_current >= (_g)->g_high) - -struct ath5k_gain_opt_step { - s16 gos_param[AR5K_GAIN_CRN_MAX_FIX_BITS]; - s32 gos_gain; -}; - -struct ath5k_gain { - u32 g_step_idx; - u32 g_current; - u32 g_target; - u32 g_low; - u32 g_high; - u32 g_f_corr; - u32 g_active; - const struct ath5k_gain_opt_step *g_step; -}; - - -/* - * HW SPECIFIC STRUCTS - */ - -/* Some EEPROM defines */ -#define AR5K_EEPROM_EEP_SCALE 100 -#define AR5K_EEPROM_EEP_DELTA 10 -#define AR5K_EEPROM_N_MODES 3 -#define AR5K_EEPROM_N_5GHZ_CHAN 10 -#define AR5K_EEPROM_N_2GHZ_CHAN 3 -#define AR5K_EEPROM_MAX_CHAN 10 -#define AR5K_EEPROM_N_PCDAC 11 -#define AR5K_EEPROM_N_TEST_FREQ 8 -#define AR5K_EEPROM_N_EDGES 8 -#define AR5K_EEPROM_N_INTERCEPTS 11 -#define AR5K_EEPROM_FREQ_M(_v) AR5K_EEPROM_OFF(_v, 0x7f, 0xff) -#define AR5K_EEPROM_PCDAC_M 0x3f -#define AR5K_EEPROM_PCDAC_START 1 -#define AR5K_EEPROM_PCDAC_STOP 63 -#define AR5K_EEPROM_PCDAC_STEP 1 -#define AR5K_EEPROM_NON_EDGE_M 0x40 -#define AR5K_EEPROM_CHANNEL_POWER 8 -#define AR5K_EEPROM_N_OBDB 4 -#define AR5K_EEPROM_OBDB_DIS 0xffff -#define AR5K_EEPROM_CHANNEL_DIS 0xff -#define AR5K_EEPROM_SCALE_OC_DELTA(_x) (((_x) * 2) / 10) -#define AR5K_EEPROM_N_CTLS(_v) AR5K_EEPROM_OFF(_v, 16, 32) -#define AR5K_EEPROM_MAX_CTLS 32 -#define AR5K_EEPROM_N_XPD_PER_CHANNEL 4 -#define AR5K_EEPROM_N_XPD0_POINTS 4 -#define AR5K_EEPROM_N_XPD3_POINTS 3 -#define AR5K_EEPROM_N_INTERCEPT_10_2GHZ 35 -#define AR5K_EEPROM_N_INTERCEPT_10_5GHZ 55 -#define AR5K_EEPROM_POWER_M 0x3f -#define AR5K_EEPROM_POWER_MIN 0 -#define AR5K_EEPROM_POWER_MAX 3150 -#define AR5K_EEPROM_POWER_STEP 50 -#define AR5K_EEPROM_POWER_TABLE_SIZE 64 -#define AR5K_EEPROM_N_POWER_LOC_11B 4 -#define AR5K_EEPROM_N_POWER_LOC_11G 6 -#define AR5K_EEPROM_I_GAIN 10 -#define AR5K_EEPROM_CCK_OFDM_DELTA 15 -#define AR5K_EEPROM_N_IQ_CAL 2 - -/* Struct to hold EEPROM calibration data */ -struct ath5k_eeprom_info { - u16 ee_magic; - u16 ee_protect; - u16 ee_regdomain; - u16 ee_version; - u16 ee_header; - u16 ee_ant_gain; - u16 ee_misc0; - u16 ee_misc1; - u16 ee_cck_ofdm_gain_delta; - u16 ee_cck_ofdm_power_delta; - u16 ee_scaled_cck_delta; - - /* Used for tx thermal adjustment (eeprom_init, rfregs) */ - u16 ee_tx_clip; - u16 ee_pwd_84; - u16 ee_pwd_90; - u16 ee_gain_select; - - /* RF Calibration settings (reset, rfregs) */ - u16 ee_i_cal[AR5K_EEPROM_N_MODES]; - u16 ee_q_cal[AR5K_EEPROM_N_MODES]; - u16 ee_fixed_bias[AR5K_EEPROM_N_MODES]; - u16 ee_turbo_max_power[AR5K_EEPROM_N_MODES]; - u16 ee_xr_power[AR5K_EEPROM_N_MODES]; - u16 ee_switch_settling[AR5K_EEPROM_N_MODES]; - u16 ee_ant_tx_rx[AR5K_EEPROM_N_MODES]; - u16 ee_ant_control[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_PCDAC]; - u16 ee_ob[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB]; - u16 ee_db[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB]; - u16 ee_tx_end2xlna_enable[AR5K_EEPROM_N_MODES]; - u16 ee_tx_end2xpa_disable[AR5K_EEPROM_N_MODES]; - u16 ee_tx_frm2xpa_enable[AR5K_EEPROM_N_MODES]; - u16 ee_thr_62[AR5K_EEPROM_N_MODES]; - u16 ee_xlna_gain[AR5K_EEPROM_N_MODES]; - u16 ee_xpd[AR5K_EEPROM_N_MODES]; - u16 ee_x_gain[AR5K_EEPROM_N_MODES]; - u16 ee_i_gain[AR5K_EEPROM_N_MODES]; - u16 ee_margin_tx_rx[AR5K_EEPROM_N_MODES]; - - /* Unused */ - u16 ee_false_detect[AR5K_EEPROM_N_MODES]; - u16 ee_cal_pier[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_2GHZ_CHAN]; - u16 ee_channel[AR5K_EEPROM_N_MODES][AR5K_EEPROM_MAX_CHAN]; /*empty*/ - - /* Conformance test limits (Unused) */ - u16 ee_ctls; - u16 ee_ctl[AR5K_EEPROM_MAX_CTLS]; - - /* Noise Floor Calibration settings */ - s16 ee_noise_floor_thr[AR5K_EEPROM_N_MODES]; - s8 ee_adc_desired_size[AR5K_EEPROM_N_MODES]; - s8 ee_pga_desired_size[AR5K_EEPROM_N_MODES]; -}; - /* * Internal RX/TX descriptor structures * (rX: reserved fields possibily used by future versions of the ar5k chipset) @@ -178,14 +26,15 @@ struct ath5k_eeprom_info { */ struct ath5k_hw_rx_ctl { u32 rx_control_0; /* RX control word 0 */ + u32 rx_control_1; /* RX control word 1 */ +} __packed; +/* RX control word 0 field/sflags */ #define AR5K_DESC_RX_CTL0 0x00000000 - u32 rx_control_1; /* RX control word 1 */ - +/* RX control word 1 fields/flags */ #define AR5K_DESC_RX_CTL1_BUF_LEN 0x00000fff #define AR5K_DESC_RX_CTL1_INTREQ 0x00002000 -} __packed; /* * common hardware RX status descriptor @@ -197,6 +46,7 @@ struct ath5k_hw_rx_status { } __packed; /* 5210/5211 */ +/* RX status word 0 fields/flags */ #define AR5K_5210_RX_DESC_STATUS0_DATA_LEN 0x00000fff #define AR5K_5210_RX_DESC_STATUS0_MORE 0x00001000 #define AR5K_5210_RX_DESC_STATUS0_RECEIVE_RATE 0x00078000 @@ -205,6 +55,8 @@ struct ath5k_hw_rx_status { #define AR5K_5210_RX_DESC_STATUS0_RECEIVE_SIGNAL_S 19 #define AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANTENNA 0x38000000 #define AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANTENNA_S 27 + +/* RX status word 1 fields/flags */ #define AR5K_5210_RX_DESC_STATUS1_DONE 0x00000001 #define AR5K_5210_RX_DESC_STATUS1_FRAME_RECEIVE_OK 0x00000002 #define AR5K_5210_RX_DESC_STATUS1_CRC_ERROR 0x00000004 @@ -220,6 +72,7 @@ struct ath5k_hw_rx_status { #define AR5K_5210_RX_DESC_STATUS1_KEY_CACHE_MISS 0x10000000 /* 5212 */ +/* RX status word 0 fields/flags */ #define AR5K_5212_RX_DESC_STATUS0_DATA_LEN 0x00000fff #define AR5K_5212_RX_DESC_STATUS0_MORE 0x00001000 #define AR5K_5212_RX_DESC_STATUS0_DECOMP_CRC_ERROR 0x00002000 @@ -229,6 +82,8 @@ struct ath5k_hw_rx_status { #define AR5K_5212_RX_DESC_STATUS0_RECEIVE_SIGNAL_S 20 #define AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA 0xf0000000 #define AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA_S 28 + +/* RX status word 1 fields/flags */ #define AR5K_5212_RX_DESC_STATUS1_DONE 0x00000001 #define AR5K_5212_RX_DESC_STATUS1_FRAME_RECEIVE_OK 0x00000002 #define AR5K_5212_RX_DESC_STATUS1_CRC_ERROR 0x00000004 @@ -246,16 +101,18 @@ struct ath5k_hw_rx_status { * common hardware RX error descriptor */ struct ath5k_hw_rx_error { - u32 rx_error_0; /* RX error word 0 */ + u32 rx_error_0; /* RX status word 0 */ + u32 rx_error_1; /* RX status word 1 */ +} __packed; +/* RX error word 0 fields/flags */ #define AR5K_RX_DESC_ERROR0 0x00000000 - u32 rx_error_1; /* RX error word 1 */ - +/* RX error word 1 fields/flags */ #define AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE 0x0000ff00 #define AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE_S 8 -} __packed; +/* PHY Error codes */ #define AR5K_DESC_RX_PHY_ERROR_NONE 0x00 #define AR5K_DESC_RX_PHY_ERROR_TIMING 0x20 #define AR5K_DESC_RX_PHY_ERROR_PARITY 0x40 @@ -270,7 +127,10 @@ struct ath5k_hw_rx_error { */ struct ath5k_hw_2w_tx_ctl { u32 tx_control_0; /* TX control word 0 */ + u32 tx_control_1; /* TX control word 1 */ +} __packed; +/* TX control word 0 fields/flags */ #define AR5K_2W_TX_DESC_CTL0_FRAME_LEN 0x00000fff #define AR5K_2W_TX_DESC_CTL0_HEADER_LEN 0x0003f000 /*[5210 ?]*/ #define AR5K_2W_TX_DESC_CTL0_HEADER_LEN_S 12 @@ -284,29 +144,34 @@ struct ath5k_hw_2w_tx_ctl { #define AR5K_2W_TX_DESC_CTL0_FRAME_TYPE_S 26 #define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5210 0x02000000 #define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5211 0x1e000000 -#define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT (ah->ah_version == AR5K_AR5210 ? \ - AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5210 : \ - AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5211) + +#define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT \ + (ah->ah_version == AR5K_AR5210 ? \ + AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5210 : \ + AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5211) + #define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_S 25 #define AR5K_2W_TX_DESC_CTL0_INTREQ 0x20000000 #define AR5K_2W_TX_DESC_CTL0_ENCRYPT_KEY_VALID 0x40000000 - u32 tx_control_1; /* TX control word 1 */ - +/* TX control word 1 fields/flags */ #define AR5K_2W_TX_DESC_CTL1_BUF_LEN 0x00000fff #define AR5K_2W_TX_DESC_CTL1_MORE 0x00001000 #define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5210 0x0007e000 #define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5211 0x000fe000 -#define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX (ah->ah_version == AR5K_AR5210 ? \ - AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5210 : \ - AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5211) + +#define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX \ + (ah->ah_version == AR5K_AR5210 ? \ + AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5210 : \ + AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5211) + #define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_S 13 #define AR5K_2W_TX_DESC_CTL1_FRAME_TYPE 0x00700000 /*[5211]*/ #define AR5K_2W_TX_DESC_CTL1_FRAME_TYPE_S 20 #define AR5K_2W_TX_DESC_CTL1_NOACK 0x00800000 /*[5211]*/ #define AR5K_2W_TX_DESC_CTL1_RTS_DURATION 0xfff80000 /*[5210 ?]*/ -} __packed; +/* Frame types */ #define AR5K_AR5210_TX_DESC_FRAME_TYPE_NORMAL 0x00 #define AR5K_AR5210_TX_DESC_FRAME_TYPE_ATIM 0x04 #define AR5K_AR5210_TX_DESC_FRAME_TYPE_PSPOLL 0x08 @@ -378,7 +243,10 @@ struct ath5k_hw_4w_tx_ctl { */ struct ath5k_hw_tx_status { u32 tx_status_0; /* TX status word 0 */ + u32 tx_status_1; /* TX status word 1 */ +} __packed; +/* TX status word 0 fields/flags */ #define AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK 0x00000001 #define AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES 0x00000002 #define AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN 0x00000004 @@ -400,8 +268,7 @@ struct ath5k_hw_tx_status { #define AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP 0xffff0000 #define AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP_S 16 - u32 tx_status_1; /* TX status word 1 */ - +/* TX status word 1 fields/flags */ #define AR5K_DESC_TX_STATUS1_DONE 0x00000001 #define AR5K_DESC_TX_STATUS1_SEQ_NUM 0x00001ffe #define AR5K_DESC_TX_STATUS1_SEQ_NUM_S 1 @@ -411,8 +278,6 @@ struct ath5k_hw_tx_status { #define AR5K_DESC_TX_STATUS1_FINAL_TS_INDEX_S 21 #define AR5K_DESC_TX_STATUS1_COMP_SUCCESS 0x00800000 #define AR5K_DESC_TX_STATUS1_XMIT_ANTENNA 0x01000000 -} __packed; - /* * 5210/5211 hardware TX descriptor @@ -441,176 +306,27 @@ struct ath5k_hw_all_rx_desc { } u; } __packed; - /* - * AR5K REGISTER ACCESS + * Atheros hardware descriptor + * This is read and written to by the hardware */ +struct ath5k_desc { + u32 ds_link; /* physical address of the next descriptor */ + u32 ds_data; /* physical address of data buffer (skb) */ -/*Swap RX/TX Descriptor for big endian archs*/ -#if defined(__BIG_ENDIAN) -#define AR5K_INIT_CFG ( \ - AR5K_CFG_SWTD | AR5K_CFG_SWRD \ -) -#else -#define AR5K_INIT_CFG 0x00000000 -#endif - -/*#define AR5K_REG_READ(_reg) ath5k_hw_reg_read(ah, _reg) - -#define AR5K_REG_WRITE(_reg, _val) ath5k_hw_reg_write(ah, _val, _reg)*/ - -#define AR5K_REG_SM(_val, _flags) \ - (((_val) << _flags##_S) & (_flags)) - -#define AR5K_REG_MS(_val, _flags) \ - (((_val) & (_flags)) >> _flags##_S) - -/* Some registers can hold multiple values of interest. For this - * reason when we want to write to these registers we must first - * retrieve the values which we do not want to clear (lets call this - * old_data) and then set the register with this and our new_value: - * ( old_data | new_value) */ -#define AR5K_REG_WRITE_BITS(ah, _reg, _flags, _val) \ - ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & ~(_flags)) | \ - (((_val) << _flags##_S) & (_flags)), _reg) - -#define AR5K_REG_MASKED_BITS(ah, _reg, _flags, _mask) \ - ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & \ - (_mask)) | (_flags), _reg) - -#define AR5K_REG_ENABLE_BITS(ah, _reg, _flags) \ - ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) | (_flags), _reg) - -#define AR5K_REG_DISABLE_BITS(ah, _reg, _flags) \ - ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) & ~(_flags), _reg) - -#define AR5K_PHY_WRITE(ah, _reg, _val) \ - ath5k_hw_reg_write(ah, _val, (ah)->ah_phy + ((_reg) << 2)) - -#define AR5K_PHY_READ(ah, _reg) \ - ath5k_hw_reg_read(ah, (ah)->ah_phy + ((_reg) << 2)) - -#define AR5K_REG_WAIT(_i) do { \ - if (_i % 64) \ - udelay(1); \ -} while (0) - -#define AR5K_EEPROM_READ(_o, _v) do { \ - if ((ret = ath5k_hw_eeprom_read(ah, (_o), &(_v))) != 0) \ - return (ret); \ -} while (0) - -#define AR5K_EEPROM_READ_HDR(_o, _v) \ - AR5K_EEPROM_READ(_o, ah->ah_capabilities.cap_eeprom._v); \ - -/* Read status of selected queue */ -#define AR5K_REG_READ_Q(ah, _reg, _queue) \ - (ath5k_hw_reg_read(ah, _reg) & (1 << _queue)) \ - -#define AR5K_REG_WRITE_Q(ah, _reg, _queue) \ - ath5k_hw_reg_write(ah, (1 << _queue), _reg) - -#define AR5K_Q_ENABLE_BITS(_reg, _queue) do { \ - _reg |= 1 << _queue; \ -} while (0) - -#define AR5K_Q_DISABLE_BITS(_reg, _queue) do { \ - _reg &= ~(1 << _queue); \ -} while (0) - -#define AR5K_LOW_ID(_a)( \ -(_a)[0] | (_a)[1] << 8 | (_a)[2] << 16 | (_a)[3] << 24 \ -) - -#define AR5K_HIGH_ID(_a) ((_a)[4] | (_a)[5] << 8) - -/* - * Initial register values - */ - -/* - * Common initial register values - */ -#define AR5K_INIT_MODE CHANNEL_B - -#define AR5K_INIT_TX_LATENCY 502 -#define AR5K_INIT_USEC 39 -#define AR5K_INIT_USEC_TURBO 79 -#define AR5K_INIT_USEC_32 31 -#define AR5K_INIT_CARR_SENSE_EN 1 -#define AR5K_INIT_PROG_IFS 920 -#define AR5K_INIT_PROG_IFS_TURBO 960 -#define AR5K_INIT_EIFS 3440 -#define AR5K_INIT_EIFS_TURBO 6880 -#define AR5K_INIT_SLOT_TIME 396 -#define AR5K_INIT_SLOT_TIME_TURBO 480 -#define AR5K_INIT_ACK_CTS_TIMEOUT 1024 -#define AR5K_INIT_ACK_CTS_TIMEOUT_TURBO 0x08000800 -#define AR5K_INIT_SIFS 560 -#define AR5K_INIT_SIFS_TURBO 480 -#define AR5K_INIT_SH_RETRY 10 -#define AR5K_INIT_LG_RETRY AR5K_INIT_SH_RETRY -#define AR5K_INIT_SSH_RETRY 32 -#define AR5K_INIT_SLG_RETRY AR5K_INIT_SSH_RETRY -#define AR5K_INIT_TX_RETRY 10 -#define AR5K_INIT_TOPS 8 -#define AR5K_INIT_RXNOFRM 8 -#define AR5K_INIT_RPGTO 0 -#define AR5K_INIT_TXNOFRM 0 -#define AR5K_INIT_BEACON_PERIOD 65535 -#define AR5K_INIT_TIM_OFFSET 0 -#define AR5K_INIT_BEACON_EN 0 -#define AR5K_INIT_RESET_TSF 0 - -#define AR5K_INIT_TRANSMIT_LATENCY ( \ - (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) | \ - (AR5K_INIT_USEC) \ -) -#define AR5K_INIT_TRANSMIT_LATENCY_TURBO ( \ - (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) | \ - (AR5K_INIT_USEC_TURBO) \ -) -#define AR5K_INIT_PROTO_TIME_CNTRL ( \ - (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS << 12) | \ - (AR5K_INIT_PROG_IFS) \ -) -#define AR5K_INIT_PROTO_TIME_CNTRL_TURBO ( \ - (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS_TURBO << 12) | \ - (AR5K_INIT_PROG_IFS_TURBO) \ -) -#define AR5K_INIT_BEACON_CONTROL ( \ - (AR5K_INIT_RESET_TSF << 24) | (AR5K_INIT_BEACON_EN << 23) | \ - (AR5K_INIT_TIM_OFFSET << 16) | (AR5K_INIT_BEACON_PERIOD) \ -) - -/* - * Non-common initial register values which have to be loaded into the - * card at boot time and after each reset. - */ - -/* Register dumps are done per operation mode */ -#define AR5K_INI_RFGAIN_5GHZ 0 -#define AR5K_INI_RFGAIN_2GHZ 1 - -#define AR5K_INI_VAL_11A 0 -#define AR5K_INI_VAL_11A_TURBO 1 -#define AR5K_INI_VAL_11B 2 -#define AR5K_INI_VAL_11G 3 -#define AR5K_INI_VAL_11G_TURBO 4 -#define AR5K_INI_VAL_XR 0 -#define AR5K_INI_VAL_MAX 5 - -#define AR5K_RF5111_INI_RF_MAX_BANKS AR5K_MAX_RF_BANKS -#define AR5K_RF5112_INI_RF_MAX_BANKS AR5K_MAX_RF_BANKS + union { + struct ath5k_hw_5210_tx_desc ds_tx5210; + struct ath5k_hw_5212_tx_desc ds_tx5212; + struct ath5k_hw_all_rx_desc ds_rx; + } ud; +} __packed; -static inline u32 ath5k_hw_bitswap(u32 val, unsigned int bits) -{ - u32 retval = 0, bit, i; +#define AR5K_RXDESC_INTREQ 0x0020 - for (i = 0; i < bits; i++) { - bit = (val >> i) & 1; - retval = (retval << 1) | bit; - } +#define AR5K_TXDESC_CLRDMASK 0x0001 +#define AR5K_TXDESC_NOACK 0x0002 /*[5211+]*/ +#define AR5K_TXDESC_RTSENA 0x0004 +#define AR5K_TXDESC_CTSENA 0x0008 +#define AR5K_TXDESC_INTREQ 0x0010 +#define AR5K_TXDESC_VEOL 0x0020 /*[5211+]*/ - return retval; -} diff --git a/drivers/net/wireless/ath5k/dma.c b/drivers/net/wireless/ath5k/dma.c new file mode 100644 index 000000000000..a28090be9603 --- /dev/null +++ b/drivers/net/wireless/ath5k/dma.c @@ -0,0 +1,566 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/*************************************\ +* DMA and interrupt masking functions * +\*************************************/ + +/* + * dma.c - DMA and interrupt masking functions + * + * Here we setup descriptor pointers (rxdp/txdp) start/stop dma engine and + * handle queue setup for 5210 chipset (rest are handled on qcu.c). + * Also we setup interrupt mask register (IMR) and read the various iterrupt + * status registers (ISR). + * + * TODO: Handle SISR on 5211+ and introduce a function to return the queue + * number that resulted the interrupt. + */ + +#include "ath5k.h" +#include "reg.h" +#include "debug.h" +#include "base.h" + +/*********\ +* Receive * +\*********/ + +/** + * ath5k_hw_start_rx_dma - Start DMA receive + * + * @ah: The &struct ath5k_hw + */ +void ath5k_hw_start_rx_dma(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + ath5k_hw_reg_write(ah, AR5K_CR_RXE, AR5K_CR); + ath5k_hw_reg_read(ah, AR5K_CR); +} + +/** + * ath5k_hw_stop_rx_dma - Stop DMA receive + * + * @ah: The &struct ath5k_hw + */ +int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah) +{ + unsigned int i; + + ATH5K_TRACE(ah->ah_sc); + ath5k_hw_reg_write(ah, AR5K_CR_RXD, AR5K_CR); + + /* + * It may take some time to disable the DMA receive unit + */ + for (i = 2000; i > 0 && + (ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_CR_RXE) != 0; + i--) + udelay(10); + + return i ? 0 : -EBUSY; +} + +/** + * ath5k_hw_get_rxdp - Get RX Descriptor's address + * + * @ah: The &struct ath5k_hw + * + * XXX: Is RXDP read and clear ? + */ +u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah) +{ + return ath5k_hw_reg_read(ah, AR5K_RXDP); +} + +/** + * ath5k_hw_set_rxdp - Set RX Descriptor's address + * + * @ah: The &struct ath5k_hw + * @phys_addr: RX descriptor address + * + * XXX: Should we check if rx is enabled before setting rxdp ? + */ +void ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr) +{ + ATH5K_TRACE(ah->ah_sc); + + ath5k_hw_reg_write(ah, phys_addr, AR5K_RXDP); +} + + +/**********\ +* Transmit * +\**********/ + +/** + * ath5k_hw_start_tx_dma - Start DMA transmit for a specific queue + * + * @ah: The &struct ath5k_hw + * @queue: The hw queue number + * + * Start DMA transmit for a specific queue and since 5210 doesn't have + * QCU/DCU, set up queue parameters for 5210 here based on queue type (one + * queue for normal data and one queue for beacons). For queue setup + * on newer chips check out qcu.c. Returns -EINVAL if queue number is out + * of range or if queue is already disabled. + * + * NOTE: Must be called after setting up tx control descriptor for that + * queue (see below). + */ +int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue) +{ + u32 tx_queue; + + ATH5K_TRACE(ah->ah_sc); + AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); + + /* Return if queue is declared inactive */ + if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) + return -EIO; + + if (ah->ah_version == AR5K_AR5210) { + tx_queue = ath5k_hw_reg_read(ah, AR5K_CR); + + /* + * Set the queue by type on 5210 + */ + switch (ah->ah_txq[queue].tqi_type) { + case AR5K_TX_QUEUE_DATA: + tx_queue |= AR5K_CR_TXE0 & ~AR5K_CR_TXD0; + break; + case AR5K_TX_QUEUE_BEACON: + tx_queue |= AR5K_CR_TXE1 & ~AR5K_CR_TXD1; + ath5k_hw_reg_write(ah, AR5K_BCR_TQ1V | AR5K_BCR_BDMAE, + AR5K_BSR); + break; + case AR5K_TX_QUEUE_CAB: + tx_queue |= AR5K_CR_TXE1 & ~AR5K_CR_TXD1; + ath5k_hw_reg_write(ah, AR5K_BCR_TQ1FV | AR5K_BCR_TQ1V | + AR5K_BCR_BDMAE, AR5K_BSR); + break; + default: + return -EINVAL; + } + /* Start queue */ + ath5k_hw_reg_write(ah, tx_queue, AR5K_CR); + ath5k_hw_reg_read(ah, AR5K_CR); + } else { + /* Return if queue is disabled */ + if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXD, queue)) + return -EIO; + + /* Start queue */ + AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXE, queue); + } + + return 0; +} + +/** + * ath5k_hw_stop_tx_dma - Stop DMA transmit on a specific queue + * + * @ah: The &struct ath5k_hw + * @queue: The hw queue number + * + * Stop DMA transmit on a specific hw queue and drain queue so we don't + * have any pending frames. Returns -EBUSY if we still have pending frames, + * -EINVAL if queue number is out of range. + * + * TODO: Test queue drain code + */ +int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue) +{ + unsigned int i = 100; + u32 tx_queue, pending; + + ATH5K_TRACE(ah->ah_sc); + AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); + + /* Return if queue is declared inactive */ + if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) + return -EIO; + + if (ah->ah_version == AR5K_AR5210) { + tx_queue = ath5k_hw_reg_read(ah, AR5K_CR); + + /* + * Set by queue type + */ + switch (ah->ah_txq[queue].tqi_type) { + case AR5K_TX_QUEUE_DATA: + tx_queue |= AR5K_CR_TXD0 & ~AR5K_CR_TXE0; + break; + case AR5K_TX_QUEUE_BEACON: + case AR5K_TX_QUEUE_CAB: + /* XXX Fix me... */ + tx_queue |= AR5K_CR_TXD1 & ~AR5K_CR_TXD1; + ath5k_hw_reg_write(ah, 0, AR5K_BSR); + break; + default: + return -EINVAL; + } + + /* Stop queue */ + ath5k_hw_reg_write(ah, tx_queue, AR5K_CR); + ath5k_hw_reg_read(ah, AR5K_CR); + } else { + /* + * Schedule TX disable and wait until queue is empty + */ + AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXD, queue); + + /*Check for pending frames*/ + do { + pending = ath5k_hw_reg_read(ah, + AR5K_QUEUE_STATUS(queue)) & + AR5K_QCU_STS_FRMPENDCNT; + udelay(100); + } while (--i && pending); + + /* Clear register */ + ath5k_hw_reg_write(ah, 0, AR5K_QCU_TXD); + if (pending) + return -EBUSY; + } + + /* TODO: Check for success else return error */ + return 0; +} + +/** + * ath5k_hw_get_txdp - Get TX Descriptor's address for a specific queue + * + * @ah: The &struct ath5k_hw + * @queue: The hw queue number + * + * Get TX descriptor's address for a specific queue. For 5210 we ignore + * the queue number and use tx queue type since we only have 2 queues. + * We use TXDP0 for normal data queue and TXDP1 for beacon queue. + * For newer chips with QCU/DCU we just read the corresponding TXDP register. + * + * XXX: Is TXDP read and clear ? + */ +u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue) +{ + u16 tx_reg; + + ATH5K_TRACE(ah->ah_sc); + AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); + + /* + * Get the transmit queue descriptor pointer from the selected queue + */ + /*5210 doesn't have QCU*/ + if (ah->ah_version == AR5K_AR5210) { + switch (ah->ah_txq[queue].tqi_type) { + case AR5K_TX_QUEUE_DATA: + tx_reg = AR5K_NOQCU_TXDP0; + break; + case AR5K_TX_QUEUE_BEACON: + case AR5K_TX_QUEUE_CAB: + tx_reg = AR5K_NOQCU_TXDP1; + break; + default: + return 0xffffffff; + } + } else { + tx_reg = AR5K_QUEUE_TXDP(queue); + } + + return ath5k_hw_reg_read(ah, tx_reg); +} + +/** + * ath5k_hw_set_txdp - Set TX Descriptor's address for a specific queue + * + * @ah: The &struct ath5k_hw + * @queue: The hw queue number + * + * Set TX descriptor's address for a specific queue. For 5210 we ignore + * the queue number and we use tx queue type since we only have 2 queues + * so as above we use TXDP0 for normal data queue and TXDP1 for beacon queue. + * For newer chips with QCU/DCU we just set the corresponding TXDP register. + * Returns -EINVAL if queue type is invalid for 5210 and -EIO if queue is still + * active. + */ +int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr) +{ + u16 tx_reg; + + ATH5K_TRACE(ah->ah_sc); + AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); + + /* + * Set the transmit queue descriptor pointer register by type + * on 5210 + */ + if (ah->ah_version == AR5K_AR5210) { + switch (ah->ah_txq[queue].tqi_type) { + case AR5K_TX_QUEUE_DATA: + tx_reg = AR5K_NOQCU_TXDP0; + break; + case AR5K_TX_QUEUE_BEACON: + case AR5K_TX_QUEUE_CAB: + tx_reg = AR5K_NOQCU_TXDP1; + break; + default: + return -EINVAL; + } + } else { + /* + * Set the transmit queue descriptor pointer for + * the selected queue on QCU for 5211+ + * (this won't work if the queue is still active) + */ + if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, queue)) + return -EIO; + + tx_reg = AR5K_QUEUE_TXDP(queue); + } + + /* Set descriptor pointer */ + ath5k_hw_reg_write(ah, phys_addr, tx_reg); + + return 0; +} + +/** + * ath5k_hw_update_tx_triglevel - Update tx trigger level + * + * @ah: The &struct ath5k_hw + * @increase: Flag to force increase of trigger level + * + * This function increases/decreases the tx trigger level for the tx fifo + * buffer (aka FIFO threshold) that is used to indicate when PCU flushes + * the buffer and transmits it's data. Lowering this results sending small + * frames more quickly but can lead to tx underruns, raising it a lot can + * result other problems (i think bmiss is related). Right now we start with + * the lowest possible (64Bytes) and if we get tx underrun we increase it using + * the increase flag. Returns -EIO if we have have reached maximum/minimum. + * + * XXX: Link this with tx DMA size ? + * XXX: Use it to save interrupts ? + * TODO: Needs testing, i think it's related to bmiss... + */ +int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase) +{ + u32 trigger_level, imr; + int ret = -EIO; + + ATH5K_TRACE(ah->ah_sc); + + /* + * Disable interrupts by setting the mask + */ + imr = ath5k_hw_set_imr(ah, ah->ah_imr & ~AR5K_INT_GLOBAL); + + trigger_level = AR5K_REG_MS(ath5k_hw_reg_read(ah, AR5K_TXCFG), + AR5K_TXCFG_TXFULL); + + if (!increase) { + if (--trigger_level < AR5K_TUNE_MIN_TX_FIFO_THRES) + goto done; + } else + trigger_level += + ((AR5K_TUNE_MAX_TX_FIFO_THRES - trigger_level) / 2); + + /* + * Update trigger level on success + */ + if (ah->ah_version == AR5K_AR5210) + ath5k_hw_reg_write(ah, trigger_level, AR5K_TRIG_LVL); + else + AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG, + AR5K_TXCFG_TXFULL, trigger_level); + + ret = 0; + +done: + /* + * Restore interrupt mask + */ + ath5k_hw_set_imr(ah, imr); + + return ret; +} + +/*******************\ +* Interrupt masking * +\*******************/ + +/** + * ath5k_hw_is_intr_pending - Check if we have pending interrupts + * + * @ah: The &struct ath5k_hw + * + * Check if we have pending interrupts to process. Returns 1 if we + * have pending interrupts and 0 if we haven't. + */ +bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + return ath5k_hw_reg_read(ah, AR5K_INTPEND); +} + +/** + * ath5k_hw_get_isr - Get interrupt status + * + * @ah: The @struct ath5k_hw + * @interrupt_mask: Driver's interrupt mask used to filter out + * interrupts in sw. + * + * This function is used inside our interrupt handler to determine the reason + * for the interrupt by reading Primary Interrupt Status Register. Returns an + * abstract interrupt status mask which is mostly ISR with some uncommon bits + * being mapped on some standard non hw-specific positions + * (check out &ath5k_int). + * + * NOTE: We use read-and-clear register, so after this function is called ISR + * is zeroed. + * + * XXX: Why filter interrupts in sw with interrupt_mask ? No benefit at all + * plus it can be misleading (one might thing that we save interrupts this way) + */ +int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask) +{ + u32 data; + + ATH5K_TRACE(ah->ah_sc); + + /* + * Read interrupt status from the Interrupt Status register + * on 5210 + */ + if (ah->ah_version == AR5K_AR5210) { + data = ath5k_hw_reg_read(ah, AR5K_ISR); + if (unlikely(data == AR5K_INT_NOCARD)) { + *interrupt_mask = data; + return -ENODEV; + } + } else { + /* + * Read interrupt status from the Read-And-Clear + * shadow register. + * Note: PISR/SISR Not available on 5210 + */ + data = ath5k_hw_reg_read(ah, AR5K_RAC_PISR); + } + + /* + * Get abstract interrupt mask (driver-compatible) + */ + *interrupt_mask = (data & AR5K_INT_COMMON) & ah->ah_imr; + + if (unlikely(data == AR5K_INT_NOCARD)) + return -ENODEV; + + if (data & (AR5K_ISR_RXOK | AR5K_ISR_RXERR)) + *interrupt_mask |= AR5K_INT_RX; + + if (data & (AR5K_ISR_TXOK | AR5K_ISR_TXERR + | AR5K_ISR_TXDESC | AR5K_ISR_TXEOL)) + *interrupt_mask |= AR5K_INT_TX; + + if (ah->ah_version != AR5K_AR5210) { + /*HIU = Host Interface Unit (PCI etc)*/ + if (unlikely(data & (AR5K_ISR_HIUERR))) + *interrupt_mask |= AR5K_INT_FATAL; + + /*Beacon Not Ready*/ + if (unlikely(data & (AR5K_ISR_BNR))) + *interrupt_mask |= AR5K_INT_BNR; + } + + /* + * XXX: BMISS interrupts may occur after association. + * I found this on 5210 code but it needs testing. If this is + * true we should disable them before assoc and re-enable them + * after a successfull assoc + some jiffies. + */ +#if 0 + interrupt_mask &= ~AR5K_INT_BMISS; +#endif + + /* + * In case we didn't handle anything, + * print the register value. + */ + if (unlikely(*interrupt_mask == 0 && net_ratelimit())) + ATH5K_PRINTF("0x%08x\n", data); + + return 0; +} + +/** + * ath5k_hw_set_imr - Set interrupt mask + * + * @ah: The &struct ath5k_hw + * @new_mask: The new interrupt mask to be set + * + * Set the interrupt mask in hw to save interrupts. We do that by mapping + * ath5k_int bits to hw-specific bits to remove abstraction and writing + * Interrupt Mask Register. + */ +enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask) +{ + enum ath5k_int old_mask, int_mask; + + /* + * Disable card interrupts to prevent any race conditions + * (they will be re-enabled afterwards). + */ + ath5k_hw_reg_write(ah, AR5K_IER_DISABLE, AR5K_IER); + ath5k_hw_reg_read(ah, AR5K_IER); + + old_mask = ah->ah_imr; + + /* + * Add additional, chipset-dependent interrupt mask flags + * and write them to the IMR (interrupt mask register). + */ + int_mask = new_mask & AR5K_INT_COMMON; + + if (new_mask & AR5K_INT_RX) + int_mask |= AR5K_IMR_RXOK | AR5K_IMR_RXERR | AR5K_IMR_RXORN | + AR5K_IMR_RXDESC; + + if (new_mask & AR5K_INT_TX) + int_mask |= AR5K_IMR_TXOK | AR5K_IMR_TXERR | AR5K_IMR_TXDESC | + AR5K_IMR_TXURN; + + if (ah->ah_version != AR5K_AR5210) { + if (new_mask & AR5K_INT_FATAL) { + int_mask |= AR5K_IMR_HIUERR; + AR5K_REG_ENABLE_BITS(ah, AR5K_SIMR2, AR5K_SIMR2_MCABT | + AR5K_SIMR2_SSERR | AR5K_SIMR2_DPERR); + } + } + + ath5k_hw_reg_write(ah, int_mask, AR5K_PIMR); + + /* Store new interrupt mask */ + ah->ah_imr = new_mask; + + /* ..re-enable interrupts */ + ath5k_hw_reg_write(ah, AR5K_IER_ENABLE, AR5K_IER); + ath5k_hw_reg_read(ah, AR5K_IER); + + return old_mask; +} + diff --git a/drivers/net/wireless/ath5k/eeprom.c b/drivers/net/wireless/ath5k/eeprom.c new file mode 100644 index 000000000000..a883839b6a9f --- /dev/null +++ b/drivers/net/wireless/ath5k/eeprom.c @@ -0,0 +1,466 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/*************************************\ +* EEPROM access functions and helpers * +\*************************************/ + +#include "ath5k.h" +#include "reg.h" +#include "debug.h" +#include "base.h" + +/* + * Read from eeprom + */ +static int ath5k_hw_eeprom_read(struct ath5k_hw *ah, u32 offset, u16 *data) +{ + u32 status, timeout; + + ATH5K_TRACE(ah->ah_sc); + /* + * Initialize EEPROM access + */ + if (ah->ah_version == AR5K_AR5210) { + AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_EEAE); + (void)ath5k_hw_reg_read(ah, AR5K_EEPROM_BASE + (4 * offset)); + } else { + ath5k_hw_reg_write(ah, offset, AR5K_EEPROM_BASE); + AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD, + AR5K_EEPROM_CMD_READ); + } + + for (timeout = AR5K_TUNE_REGISTER_TIMEOUT; timeout > 0; timeout--) { + status = ath5k_hw_reg_read(ah, AR5K_EEPROM_STATUS); + if (status & AR5K_EEPROM_STAT_RDDONE) { + if (status & AR5K_EEPROM_STAT_RDERR) + return -EIO; + *data = (u16)(ath5k_hw_reg_read(ah, AR5K_EEPROM_DATA) & + 0xffff); + return 0; + } + udelay(15); + } + + return -ETIMEDOUT; +} + +/* + * Translate binary channel representation in EEPROM to frequency + */ +static u16 ath5k_eeprom_bin2freq(struct ath5k_hw *ah, u16 bin, + unsigned int mode) +{ + u16 val; + + if (bin == AR5K_EEPROM_CHANNEL_DIS) + return bin; + + if (mode == AR5K_EEPROM_MODE_11A) { + if (ah->ah_ee_version > AR5K_EEPROM_VERSION_3_2) + val = (5 * bin) + 4800; + else + val = bin > 62 ? (10 * 62) + (5 * (bin - 62)) + 5100 : + (bin * 10) + 5100; + } else { + if (ah->ah_ee_version > AR5K_EEPROM_VERSION_3_2) + val = bin + 2300; + else + val = bin + 2400; + } + + return val; +} + +/* + * Read antenna infos from eeprom + */ +static int ath5k_eeprom_read_ants(struct ath5k_hw *ah, u32 *offset, + unsigned int mode) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + u32 o = *offset; + u16 val; + int ret, i = 0; + + AR5K_EEPROM_READ(o++, val); + ee->ee_switch_settling[mode] = (val >> 8) & 0x7f; + ee->ee_ant_tx_rx[mode] = (val >> 2) & 0x3f; + ee->ee_ant_control[mode][i] = (val << 4) & 0x3f; + + AR5K_EEPROM_READ(o++, val); + ee->ee_ant_control[mode][i++] |= (val >> 12) & 0xf; + ee->ee_ant_control[mode][i++] = (val >> 6) & 0x3f; + ee->ee_ant_control[mode][i++] = val & 0x3f; + + AR5K_EEPROM_READ(o++, val); + ee->ee_ant_control[mode][i++] = (val >> 10) & 0x3f; + ee->ee_ant_control[mode][i++] = (val >> 4) & 0x3f; + ee->ee_ant_control[mode][i] = (val << 2) & 0x3f; + + AR5K_EEPROM_READ(o++, val); + ee->ee_ant_control[mode][i++] |= (val >> 14) & 0x3; + ee->ee_ant_control[mode][i++] = (val >> 8) & 0x3f; + ee->ee_ant_control[mode][i++] = (val >> 2) & 0x3f; + ee->ee_ant_control[mode][i] = (val << 4) & 0x3f; + + AR5K_EEPROM_READ(o++, val); + ee->ee_ant_control[mode][i++] |= (val >> 12) & 0xf; + ee->ee_ant_control[mode][i++] = (val >> 6) & 0x3f; + ee->ee_ant_control[mode][i++] = val & 0x3f; + + /* Get antenna modes */ + ah->ah_antenna[mode][0] = + (ee->ee_ant_control[mode][0] << 4) | 0x1; + ah->ah_antenna[mode][AR5K_ANT_FIXED_A] = + ee->ee_ant_control[mode][1] | + (ee->ee_ant_control[mode][2] << 6) | + (ee->ee_ant_control[mode][3] << 12) | + (ee->ee_ant_control[mode][4] << 18) | + (ee->ee_ant_control[mode][5] << 24); + ah->ah_antenna[mode][AR5K_ANT_FIXED_B] = + ee->ee_ant_control[mode][6] | + (ee->ee_ant_control[mode][7] << 6) | + (ee->ee_ant_control[mode][8] << 12) | + (ee->ee_ant_control[mode][9] << 18) | + (ee->ee_ant_control[mode][10] << 24); + + /* return new offset */ + *offset = o; + + return 0; +} + +/* + * Read supported modes from eeprom + */ +static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset, + unsigned int mode) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + u32 o = *offset; + u16 val; + int ret; + + AR5K_EEPROM_READ(o++, val); + ee->ee_tx_end2xlna_enable[mode] = (val >> 8) & 0xff; + ee->ee_thr_62[mode] = val & 0xff; + + if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2) + ee->ee_thr_62[mode] = mode == AR5K_EEPROM_MODE_11A ? 15 : 28; + + AR5K_EEPROM_READ(o++, val); + ee->ee_tx_end2xpa_disable[mode] = (val >> 8) & 0xff; + ee->ee_tx_frm2xpa_enable[mode] = val & 0xff; + + AR5K_EEPROM_READ(o++, val); + ee->ee_pga_desired_size[mode] = (val >> 8) & 0xff; + + if ((val & 0xff) & 0x80) + ee->ee_noise_floor_thr[mode] = -((((val & 0xff) ^ 0xff)) + 1); + else + ee->ee_noise_floor_thr[mode] = val & 0xff; + + if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2) + ee->ee_noise_floor_thr[mode] = + mode == AR5K_EEPROM_MODE_11A ? -54 : -1; + + AR5K_EEPROM_READ(o++, val); + ee->ee_xlna_gain[mode] = (val >> 5) & 0xff; + ee->ee_x_gain[mode] = (val >> 1) & 0xf; + ee->ee_xpd[mode] = val & 0x1; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) + ee->ee_fixed_bias[mode] = (val >> 13) & 0x1; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_3_3) { + AR5K_EEPROM_READ(o++, val); + ee->ee_false_detect[mode] = (val >> 6) & 0x7f; + + if (mode == AR5K_EEPROM_MODE_11A) + ee->ee_xr_power[mode] = val & 0x3f; + else { + ee->ee_ob[mode][0] = val & 0x7; + ee->ee_db[mode][0] = (val >> 3) & 0x7; + } + } + + if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_4) { + ee->ee_i_gain[mode] = AR5K_EEPROM_I_GAIN; + ee->ee_cck_ofdm_power_delta = AR5K_EEPROM_CCK_OFDM_DELTA; + } else { + ee->ee_i_gain[mode] = (val >> 13) & 0x7; + + AR5K_EEPROM_READ(o++, val); + ee->ee_i_gain[mode] |= (val << 3) & 0x38; + + if (mode == AR5K_EEPROM_MODE_11G) + ee->ee_cck_ofdm_power_delta = (val >> 3) & 0xff; + } + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0 && + mode == AR5K_EEPROM_MODE_11A) { + ee->ee_i_cal[mode] = (val >> 8) & 0x3f; + ee->ee_q_cal[mode] = (val >> 3) & 0x1f; + } + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_6 && + mode == AR5K_EEPROM_MODE_11G) + ee->ee_scaled_cck_delta = (val >> 11) & 0x1f; + + /* return new offset */ + *offset = o; + + return 0; +} + +/* + * Initialize eeprom & capabilities structs + */ +int ath5k_eeprom_init(struct ath5k_hw *ah) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + unsigned int mode, i; + int ret; + u32 offset; + u16 val; + + /* Initial TX thermal adjustment values */ + ee->ee_tx_clip = 4; + ee->ee_pwd_84 = ee->ee_pwd_90 = 1; + ee->ee_gain_select = 1; + + /* + * Read values from EEPROM and store them in the capability structure + */ + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MAGIC, ee_magic); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_PROTECT, ee_protect); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_REG_DOMAIN, ee_regdomain); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_VERSION, ee_version); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_HDR, ee_header); + + /* Return if we have an old EEPROM */ + if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_0) + return 0; + +#ifdef notyet + /* + * Validate the checksum of the EEPROM date. There are some + * devices with invalid EEPROMs. + */ + for (cksum = 0, offset = 0; offset < AR5K_EEPROM_INFO_MAX; offset++) { + AR5K_EEPROM_READ(AR5K_EEPROM_INFO(offset), val); + cksum ^= val; + } + if (cksum != AR5K_EEPROM_INFO_CKSUM) { + ATH5K_ERR(ah->ah_sc, "Invalid EEPROM checksum 0x%04x\n", cksum); + return -EIO; + } +#endif + + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_ANT_GAIN(ah->ah_ee_version), + ee_ant_gain); + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) { + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC0, ee_misc0); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC1, ee_misc1); + } + + if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_3) { + AR5K_EEPROM_READ(AR5K_EEPROM_OBDB0_2GHZ, val); + ee->ee_ob[AR5K_EEPROM_MODE_11B][0] = val & 0x7; + ee->ee_db[AR5K_EEPROM_MODE_11B][0] = (val >> 3) & 0x7; + + AR5K_EEPROM_READ(AR5K_EEPROM_OBDB1_2GHZ, val); + ee->ee_ob[AR5K_EEPROM_MODE_11G][0] = val & 0x7; + ee->ee_db[AR5K_EEPROM_MODE_11G][0] = (val >> 3) & 0x7; + } + + /* + * Get conformance test limit values + */ + offset = AR5K_EEPROM_CTL(ah->ah_ee_version); + ee->ee_ctls = AR5K_EEPROM_N_CTLS(ah->ah_ee_version); + + for (i = 0; i < ee->ee_ctls; i++) { + AR5K_EEPROM_READ(offset++, val); + ee->ee_ctl[i] = (val >> 8) & 0xff; + ee->ee_ctl[i + 1] = val & 0xff; + } + + /* + * Get values for 802.11a (5GHz) + */ + mode = AR5K_EEPROM_MODE_11A; + + ee->ee_turbo_max_power[mode] = + AR5K_EEPROM_HDR_T_5GHZ_DBM(ee->ee_header); + + offset = AR5K_EEPROM_MODES_11A(ah->ah_ee_version); + + ret = ath5k_eeprom_read_ants(ah, &offset, mode); + if (ret) + return ret; + + AR5K_EEPROM_READ(offset++, val); + ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff); + ee->ee_ob[mode][3] = (val >> 5) & 0x7; + ee->ee_db[mode][3] = (val >> 2) & 0x7; + ee->ee_ob[mode][2] = (val << 1) & 0x7; + + AR5K_EEPROM_READ(offset++, val); + ee->ee_ob[mode][2] |= (val >> 15) & 0x1; + ee->ee_db[mode][2] = (val >> 12) & 0x7; + ee->ee_ob[mode][1] = (val >> 9) & 0x7; + ee->ee_db[mode][1] = (val >> 6) & 0x7; + ee->ee_ob[mode][0] = (val >> 3) & 0x7; + ee->ee_db[mode][0] = val & 0x7; + + ret = ath5k_eeprom_read_modes(ah, &offset, mode); + if (ret) + return ret; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) { + AR5K_EEPROM_READ(offset++, val); + ee->ee_margin_tx_rx[mode] = val & 0x3f; + } + + /* + * Get values for 802.11b (2.4GHz) + */ + mode = AR5K_EEPROM_MODE_11B; + offset = AR5K_EEPROM_MODES_11B(ah->ah_ee_version); + + ret = ath5k_eeprom_read_ants(ah, &offset, mode); + if (ret) + return ret; + + AR5K_EEPROM_READ(offset++, val); + ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff); + ee->ee_ob[mode][1] = (val >> 4) & 0x7; + ee->ee_db[mode][1] = val & 0x7; + + ret = ath5k_eeprom_read_modes(ah, &offset, mode); + if (ret) + return ret; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) { + AR5K_EEPROM_READ(offset++, val); + ee->ee_cal_pier[mode][0] = + ath5k_eeprom_bin2freq(ah, val & 0xff, mode); + ee->ee_cal_pier[mode][1] = + ath5k_eeprom_bin2freq(ah, (val >> 8) & 0xff, mode); + + AR5K_EEPROM_READ(offset++, val); + ee->ee_cal_pier[mode][2] = + ath5k_eeprom_bin2freq(ah, val & 0xff, mode); + } + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) + ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f; + + /* + * Get values for 802.11g (2.4GHz) + */ + mode = AR5K_EEPROM_MODE_11G; + offset = AR5K_EEPROM_MODES_11G(ah->ah_ee_version); + + ret = ath5k_eeprom_read_ants(ah, &offset, mode); + if (ret) + return ret; + + AR5K_EEPROM_READ(offset++, val); + ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff); + ee->ee_ob[mode][1] = (val >> 4) & 0x7; + ee->ee_db[mode][1] = val & 0x7; + + ret = ath5k_eeprom_read_modes(ah, &offset, mode); + if (ret) + return ret; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) { + AR5K_EEPROM_READ(offset++, val); + ee->ee_cal_pier[mode][0] = + ath5k_eeprom_bin2freq(ah, val & 0xff, mode); + ee->ee_cal_pier[mode][1] = + ath5k_eeprom_bin2freq(ah, (val >> 8) & 0xff, mode); + + AR5K_EEPROM_READ(offset++, val); + ee->ee_turbo_max_power[mode] = val & 0x7f; + ee->ee_xr_power[mode] = (val >> 7) & 0x3f; + + AR5K_EEPROM_READ(offset++, val); + ee->ee_cal_pier[mode][2] = + ath5k_eeprom_bin2freq(ah, val & 0xff, mode); + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) + ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f; + + AR5K_EEPROM_READ(offset++, val); + ee->ee_i_cal[mode] = (val >> 8) & 0x3f; + ee->ee_q_cal[mode] = (val >> 3) & 0x1f; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_2) { + AR5K_EEPROM_READ(offset++, val); + ee->ee_cck_ofdm_gain_delta = val & 0xff; + } + } + + /* + * Read 5GHz EEPROM channels + */ + + return 0; +} + +/* + * Read the MAC address from eeprom + */ +int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac) +{ + u8 mac_d[ETH_ALEN]; + u32 total, offset; + u16 data; + int octet, ret; + + memset(mac, 0, ETH_ALEN); + memset(mac_d, 0, ETH_ALEN); + + ret = ath5k_hw_eeprom_read(ah, 0x20, &data); + if (ret) + return ret; + + for (offset = 0x1f, octet = 0, total = 0; offset >= 0x1d; offset--) { + ret = ath5k_hw_eeprom_read(ah, offset, &data); + if (ret) + return ret; + + total += data; + mac_d[octet + 1] = data & 0xff; + mac_d[octet] = data >> 8; + octet += 2; + } + + memcpy(mac, mac_d, ETH_ALEN); + + if (!total || total == 3 * 0xffff) + return -EINVAL; + + return 0; +} + diff --git a/drivers/net/wireless/ath5k/eeprom.h b/drivers/net/wireless/ath5k/eeprom.h new file mode 100644 index 000000000000..a468ecfbb18a --- /dev/null +++ b/drivers/net/wireless/ath5k/eeprom.h @@ -0,0 +1,215 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/* + * Common ar5xxx EEPROM data offsets (set these on AR5K_EEPROM_BASE) + */ +#define AR5K_EEPROM_MAGIC 0x003d /* EEPROM Magic number */ +#define AR5K_EEPROM_MAGIC_VALUE 0x5aa5 /* Default - found on EEPROM */ +#define AR5K_EEPROM_MAGIC_5212 0x0000145c /* 5212 */ +#define AR5K_EEPROM_MAGIC_5211 0x0000145b /* 5211 */ +#define AR5K_EEPROM_MAGIC_5210 0x0000145a /* 5210 */ + +#define AR5K_EEPROM_PROTECT 0x003f /* EEPROM protect status */ +#define AR5K_EEPROM_PROTECT_RD_0_31 0x0001 /* Read protection bit for offsets 0x0 - 0x1f */ +#define AR5K_EEPROM_PROTECT_WR_0_31 0x0002 /* Write protection bit for offsets 0x0 - 0x1f */ +#define AR5K_EEPROM_PROTECT_RD_32_63 0x0004 /* 0x20 - 0x3f */ +#define AR5K_EEPROM_PROTECT_WR_32_63 0x0008 +#define AR5K_EEPROM_PROTECT_RD_64_127 0x0010 /* 0x40 - 0x7f */ +#define AR5K_EEPROM_PROTECT_WR_64_127 0x0020 +#define AR5K_EEPROM_PROTECT_RD_128_191 0x0040 /* 0x80 - 0xbf (regdom) */ +#define AR5K_EEPROM_PROTECT_WR_128_191 0x0080 +#define AR5K_EEPROM_PROTECT_RD_192_207 0x0100 /* 0xc0 - 0xcf */ +#define AR5K_EEPROM_PROTECT_WR_192_207 0x0200 +#define AR5K_EEPROM_PROTECT_RD_208_223 0x0400 /* 0xd0 - 0xdf */ +#define AR5K_EEPROM_PROTECT_WR_208_223 0x0800 +#define AR5K_EEPROM_PROTECT_RD_224_239 0x1000 /* 0xe0 - 0xef */ +#define AR5K_EEPROM_PROTECT_WR_224_239 0x2000 +#define AR5K_EEPROM_PROTECT_RD_240_255 0x4000 /* 0xf0 - 0xff */ +#define AR5K_EEPROM_PROTECT_WR_240_255 0x8000 +#define AR5K_EEPROM_REG_DOMAIN 0x00bf /* EEPROM regdom */ +#define AR5K_EEPROM_INFO_BASE 0x00c0 /* EEPROM header */ +#define AR5K_EEPROM_INFO_MAX (0x400 - AR5K_EEPROM_INFO_BASE) +#define AR5K_EEPROM_INFO_CKSUM 0xffff +#define AR5K_EEPROM_INFO(_n) (AR5K_EEPROM_INFO_BASE + (_n)) + +#define AR5K_EEPROM_VERSION AR5K_EEPROM_INFO(1) /* EEPROM Version */ +#define AR5K_EEPROM_VERSION_3_0 0x3000 /* No idea what's going on before this version */ +#define AR5K_EEPROM_VERSION_3_1 0x3001 /* ob/db values for 2Ghz (ar5211_rfregs) */ +#define AR5K_EEPROM_VERSION_3_2 0x3002 /* different frequency representation (eeprom_bin2freq) */ +#define AR5K_EEPROM_VERSION_3_3 0x3003 /* offsets changed, has 32 CTLs (see below) and ee_false_detect (eeprom_read_modes) */ +#define AR5K_EEPROM_VERSION_3_4 0x3004 /* has ee_i_gain ee_cck_ofdm_power_delta (eeprom_read_modes) */ +#define AR5K_EEPROM_VERSION_4_0 0x4000 /* has ee_misc*, ee_cal_pier, ee_turbo_max_power and ee_xr_power (eeprom_init) */ +#define AR5K_EEPROM_VERSION_4_1 0x4001 /* has ee_margin_tx_rx (eeprom_init) */ +#define AR5K_EEPROM_VERSION_4_2 0x4002 /* has ee_cck_ofdm_gain_delta (eeprom_init) */ +#define AR5K_EEPROM_VERSION_4_3 0x4003 +#define AR5K_EEPROM_VERSION_4_4 0x4004 +#define AR5K_EEPROM_VERSION_4_5 0x4005 +#define AR5K_EEPROM_VERSION_4_6 0x4006 /* has ee_scaled_cck_delta */ +#define AR5K_EEPROM_VERSION_4_7 0x4007 + +#define AR5K_EEPROM_MODE_11A 0 +#define AR5K_EEPROM_MODE_11B 1 +#define AR5K_EEPROM_MODE_11G 2 + +#define AR5K_EEPROM_HDR AR5K_EEPROM_INFO(2) /* Header that contains the device caps */ +#define AR5K_EEPROM_HDR_11A(_v) (((_v) >> AR5K_EEPROM_MODE_11A) & 0x1) +#define AR5K_EEPROM_HDR_11B(_v) (((_v) >> AR5K_EEPROM_MODE_11B) & 0x1) +#define AR5K_EEPROM_HDR_11G(_v) (((_v) >> AR5K_EEPROM_MODE_11G) & 0x1) +#define AR5K_EEPROM_HDR_T_2GHZ_DIS(_v) (((_v) >> 3) & 0x1) /* Disable turbo for 2Ghz (?) */ +#define AR5K_EEPROM_HDR_T_5GHZ_DBM(_v) (((_v) >> 4) & 0x7f) /* Max turbo power for a/XR mode (eeprom_init) */ +#define AR5K_EEPROM_HDR_DEVICE(_v) (((_v) >> 11) & 0x7) +#define AR5K_EEPROM_HDR_T_5GHZ_DIS(_v) (((_v) >> 15) & 0x1) /* Disable turbo for 5Ghz (?) */ +#define AR5K_EEPROM_HDR_RFKILL(_v) (((_v) >> 14) & 0x1) /* Device has RFKill support */ + +#define AR5K_EEPROM_RFKILL_GPIO_SEL 0x0000001c +#define AR5K_EEPROM_RFKILL_GPIO_SEL_S 2 +#define AR5K_EEPROM_RFKILL_POLARITY 0x00000002 +#define AR5K_EEPROM_RFKILL_POLARITY_S 1 + +/* Newer EEPROMs are using a different offset */ +#define AR5K_EEPROM_OFF(_v, _v3_0, _v3_3) \ + (((_v) >= AR5K_EEPROM_VERSION_3_3) ? _v3_3 : _v3_0) + +#define AR5K_EEPROM_ANT_GAIN(_v) AR5K_EEPROM_OFF(_v, 0x00c4, 0x00c3) +#define AR5K_EEPROM_ANT_GAIN_5GHZ(_v) ((int8_t)(((_v) >> 8) & 0xff)) +#define AR5K_EEPROM_ANT_GAIN_2GHZ(_v) ((int8_t)((_v) & 0xff)) + +/* calibration settings */ +#define AR5K_EEPROM_MODES_11A(_v) AR5K_EEPROM_OFF(_v, 0x00c5, 0x00d4) +#define AR5K_EEPROM_MODES_11B(_v) AR5K_EEPROM_OFF(_v, 0x00d0, 0x00f2) +#define AR5K_EEPROM_MODES_11G(_v) AR5K_EEPROM_OFF(_v, 0x00da, 0x010d) +#define AR5K_EEPROM_CTL(_v) AR5K_EEPROM_OFF(_v, 0x00e4, 0x0128) /* Conformance test limits */ + +/* [3.1 - 3.3] */ +#define AR5K_EEPROM_OBDB0_2GHZ 0x00ec +#define AR5K_EEPROM_OBDB1_2GHZ 0x00ed + +/* Misc values available since EEPROM 4.0 */ +#define AR5K_EEPROM_MISC0 0x00c4 +#define AR5K_EEPROM_EARSTART(_v) ((_v) & 0xfff) +#define AR5K_EEPROM_EEMAP(_v) (((_v) >> 14) & 0x3) +#define AR5K_EEPROM_MISC1 0x00c5 +#define AR5K_EEPROM_TARGET_PWRSTART(_v) ((_v) & 0xfff) +#define AR5K_EEPROM_HAS32KHZCRYSTAL(_v) (((_v) >> 14) & 0x1) + + +/* Some EEPROM defines */ +#define AR5K_EEPROM_EEP_SCALE 100 +#define AR5K_EEPROM_EEP_DELTA 10 +#define AR5K_EEPROM_N_MODES 3 +#define AR5K_EEPROM_N_5GHZ_CHAN 10 +#define AR5K_EEPROM_N_2GHZ_CHAN 3 +#define AR5K_EEPROM_MAX_CHAN 10 +#define AR5K_EEPROM_N_PCDAC 11 +#define AR5K_EEPROM_N_TEST_FREQ 8 +#define AR5K_EEPROM_N_EDGES 8 +#define AR5K_EEPROM_N_INTERCEPTS 11 +#define AR5K_EEPROM_FREQ_M(_v) AR5K_EEPROM_OFF(_v, 0x7f, 0xff) +#define AR5K_EEPROM_PCDAC_M 0x3f +#define AR5K_EEPROM_PCDAC_START 1 +#define AR5K_EEPROM_PCDAC_STOP 63 +#define AR5K_EEPROM_PCDAC_STEP 1 +#define AR5K_EEPROM_NON_EDGE_M 0x40 +#define AR5K_EEPROM_CHANNEL_POWER 8 +#define AR5K_EEPROM_N_OBDB 4 +#define AR5K_EEPROM_OBDB_DIS 0xffff +#define AR5K_EEPROM_CHANNEL_DIS 0xff +#define AR5K_EEPROM_SCALE_OC_DELTA(_x) (((_x) * 2) / 10) +#define AR5K_EEPROM_N_CTLS(_v) AR5K_EEPROM_OFF(_v, 16, 32) +#define AR5K_EEPROM_MAX_CTLS 32 +#define AR5K_EEPROM_N_XPD_PER_CHANNEL 4 +#define AR5K_EEPROM_N_XPD0_POINTS 4 +#define AR5K_EEPROM_N_XPD3_POINTS 3 +#define AR5K_EEPROM_N_INTERCEPT_10_2GHZ 35 +#define AR5K_EEPROM_N_INTERCEPT_10_5GHZ 55 +#define AR5K_EEPROM_POWER_M 0x3f +#define AR5K_EEPROM_POWER_MIN 0 +#define AR5K_EEPROM_POWER_MAX 3150 +#define AR5K_EEPROM_POWER_STEP 50 +#define AR5K_EEPROM_POWER_TABLE_SIZE 64 +#define AR5K_EEPROM_N_POWER_LOC_11B 4 +#define AR5K_EEPROM_N_POWER_LOC_11G 6 +#define AR5K_EEPROM_I_GAIN 10 +#define AR5K_EEPROM_CCK_OFDM_DELTA 15 +#define AR5K_EEPROM_N_IQ_CAL 2 + +#define AR5K_EEPROM_READ(_o, _v) do { \ + ret = ath5k_hw_eeprom_read(ah, (_o), &(_v)); \ + if (ret) \ + return ret; \ +} while (0) + +#define AR5K_EEPROM_READ_HDR(_o, _v) \ + AR5K_EEPROM_READ(_o, ah->ah_capabilities.cap_eeprom._v); \ + +/* Struct to hold EEPROM calibration data */ +struct ath5k_eeprom_info { + u16 ee_magic; + u16 ee_protect; + u16 ee_regdomain; + u16 ee_version; + u16 ee_header; + u16 ee_ant_gain; + u16 ee_misc0; + u16 ee_misc1; + u16 ee_cck_ofdm_gain_delta; + u16 ee_cck_ofdm_power_delta; + u16 ee_scaled_cck_delta; + + /* Used for tx thermal adjustment (eeprom_init, rfregs) */ + u16 ee_tx_clip; + u16 ee_pwd_84; + u16 ee_pwd_90; + u16 ee_gain_select; + + /* RF Calibration settings (reset, rfregs) */ + u16 ee_i_cal[AR5K_EEPROM_N_MODES]; + u16 ee_q_cal[AR5K_EEPROM_N_MODES]; + u16 ee_fixed_bias[AR5K_EEPROM_N_MODES]; + u16 ee_turbo_max_power[AR5K_EEPROM_N_MODES]; + u16 ee_xr_power[AR5K_EEPROM_N_MODES]; + u16 ee_switch_settling[AR5K_EEPROM_N_MODES]; + u16 ee_ant_tx_rx[AR5K_EEPROM_N_MODES]; + u16 ee_ant_control[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_PCDAC]; + u16 ee_ob[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB]; + u16 ee_db[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB]; + u16 ee_tx_end2xlna_enable[AR5K_EEPROM_N_MODES]; + u16 ee_tx_end2xpa_disable[AR5K_EEPROM_N_MODES]; + u16 ee_tx_frm2xpa_enable[AR5K_EEPROM_N_MODES]; + u16 ee_thr_62[AR5K_EEPROM_N_MODES]; + u16 ee_xlna_gain[AR5K_EEPROM_N_MODES]; + u16 ee_xpd[AR5K_EEPROM_N_MODES]; + u16 ee_x_gain[AR5K_EEPROM_N_MODES]; + u16 ee_i_gain[AR5K_EEPROM_N_MODES]; + u16 ee_margin_tx_rx[AR5K_EEPROM_N_MODES]; + + /* Unused */ + u16 ee_false_detect[AR5K_EEPROM_N_MODES]; + u16 ee_cal_pier[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_2GHZ_CHAN]; + u16 ee_channel[AR5K_EEPROM_N_MODES][AR5K_EEPROM_MAX_CHAN]; /*empty*/ + + /* Conformance test limits (Unused) */ + u16 ee_ctls; + u16 ee_ctl[AR5K_EEPROM_MAX_CTLS]; + + /* Noise Floor Calibration settings */ + s16 ee_noise_floor_thr[AR5K_EEPROM_N_MODES]; + s8 ee_adc_desired_size[AR5K_EEPROM_N_MODES]; + s8 ee_pga_desired_size[AR5K_EEPROM_N_MODES]; +}; diff --git a/drivers/net/wireless/ath5k/gpio.c b/drivers/net/wireless/ath5k/gpio.c new file mode 100644 index 000000000000..b77205adc180 --- /dev/null +++ b/drivers/net/wireless/ath5k/gpio.c @@ -0,0 +1,176 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/****************\ + GPIO Functions +\****************/ + +#include "ath5k.h" +#include "reg.h" +#include "debug.h" +#include "base.h" + +/* + * Set led state + */ +void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state) +{ + u32 led; + /*5210 has different led mode handling*/ + u32 led_5210; + + ATH5K_TRACE(ah->ah_sc); + + /*Reset led status*/ + if (ah->ah_version != AR5K_AR5210) + AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG, + AR5K_PCICFG_LEDMODE | AR5K_PCICFG_LED); + else + AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_LED); + + /* + * Some blinking values, define at your wish + */ + switch (state) { + case AR5K_LED_SCAN: + case AR5K_LED_AUTH: + led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_PEND; + led_5210 = AR5K_PCICFG_LED_PEND | AR5K_PCICFG_LED_BCTL; + break; + + case AR5K_LED_INIT: + led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_NONE; + led_5210 = AR5K_PCICFG_LED_PEND; + break; + + case AR5K_LED_ASSOC: + case AR5K_LED_RUN: + led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_ASSOC; + led_5210 = AR5K_PCICFG_LED_ASSOC; + break; + + default: + led = AR5K_PCICFG_LEDMODE_PROM | AR5K_PCICFG_LED_NONE; + led_5210 = AR5K_PCICFG_LED_PEND; + break; + } + + /*Write new status to the register*/ + if (ah->ah_version != AR5K_AR5210) + AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led); + else + AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led_5210); +} + +/* + * Set GPIO inputs + */ +int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio) +{ + ATH5K_TRACE(ah->ah_sc); + if (gpio > AR5K_NUM_GPIO) + return -EINVAL; + + ath5k_hw_reg_write(ah, + (ath5k_hw_reg_read(ah, AR5K_GPIOCR) & ~AR5K_GPIOCR_OUT(gpio)) + | AR5K_GPIOCR_IN(gpio), AR5K_GPIOCR); + + return 0; +} + +/* + * Set GPIO outputs + */ +int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio) +{ + ATH5K_TRACE(ah->ah_sc); + if (gpio > AR5K_NUM_GPIO) + return -EINVAL; + + ath5k_hw_reg_write(ah, + (ath5k_hw_reg_read(ah, AR5K_GPIOCR) & ~AR5K_GPIOCR_OUT(gpio)) + | AR5K_GPIOCR_OUT(gpio), AR5K_GPIOCR); + + return 0; +} + +/* + * Get GPIO state + */ +u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio) +{ + ATH5K_TRACE(ah->ah_sc); + if (gpio > AR5K_NUM_GPIO) + return 0xffffffff; + + /* GPIO input magic */ + return ((ath5k_hw_reg_read(ah, AR5K_GPIODI) & AR5K_GPIODI_M) >> gpio) & + 0x1; +} + +/* + * Set GPIO state + */ +int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val) +{ + u32 data; + ATH5K_TRACE(ah->ah_sc); + + if (gpio > AR5K_NUM_GPIO) + return -EINVAL; + + /* GPIO output magic */ + data = ath5k_hw_reg_read(ah, AR5K_GPIODO); + + data &= ~(1 << gpio); + data |= (val & 1) << gpio; + + ath5k_hw_reg_write(ah, data, AR5K_GPIODO); + + return 0; +} + +/* + * Initialize the GPIO interrupt (RFKill switch) + */ +void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, + u32 interrupt_level) +{ + u32 data; + + ATH5K_TRACE(ah->ah_sc); + if (gpio > AR5K_NUM_GPIO) + return; + + /* + * Set the GPIO interrupt + */ + data = (ath5k_hw_reg_read(ah, AR5K_GPIOCR) & + ~(AR5K_GPIOCR_INT_SEL(gpio) | AR5K_GPIOCR_INT_SELH | + AR5K_GPIOCR_INT_ENA | AR5K_GPIOCR_OUT(gpio))) | + (AR5K_GPIOCR_INT_SEL(gpio) | AR5K_GPIOCR_INT_ENA); + + ath5k_hw_reg_write(ah, interrupt_level ? data : + (data | AR5K_GPIOCR_INT_SELH), AR5K_GPIOCR); + + ah->ah_imr |= AR5K_IMR_GPIO; + + /* Enable GPIO interrupts */ + AR5K_REG_ENABLE_BITS(ah, AR5K_PIMR, AR5K_IMR_GPIO); +} + diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c deleted file mode 100644 index b987aa1e0f77..000000000000 --- a/drivers/net/wireless/ath5k/hw.c +++ /dev/null @@ -1,4492 +0,0 @@ -/* - * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org> - * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com> - * Copyright (c) 2007 Matthew W. S. Bell <mentor@madwifi.org> - * Copyright (c) 2007 Luis Rodriguez <mcgrof@winlab.rutgers.edu> - * Copyright (c) 2007 Pavel Roskin <proski@gnu.org> - * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com> - * - * Permission to use, copy, modify, and distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -/* - * HW related functions for Atheros Wireless LAN devices. - */ - -#include <linux/pci.h> -#include <linux/delay.h> - -#include "reg.h" -#include "base.h" -#include "debug.h" - -/* Prototypes */ -static int ath5k_hw_nic_reset(struct ath5k_hw *, u32); -static int ath5k_hw_nic_wakeup(struct ath5k_hw *, int, bool); -static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *, struct ath5k_desc *, - unsigned int, unsigned int, enum ath5k_pkt_type, unsigned int, - unsigned int, unsigned int, unsigned int, unsigned int, unsigned int, - unsigned int, unsigned int); -static int ath5k_hw_setup_xr_tx_desc(struct ath5k_hw *, struct ath5k_desc *, - unsigned int, unsigned int, unsigned int, unsigned int, unsigned int, - unsigned int); -static int ath5k_hw_proc_4word_tx_status(struct ath5k_hw *, struct ath5k_desc *, - struct ath5k_tx_status *); -static int ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *, struct ath5k_desc *, - unsigned int, unsigned int, enum ath5k_pkt_type, unsigned int, - unsigned int, unsigned int, unsigned int, unsigned int, unsigned int, - unsigned int, unsigned int); -static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *, struct ath5k_desc *, - struct ath5k_tx_status *); -static int ath5k_hw_proc_5212_rx_status(struct ath5k_hw *, struct ath5k_desc *, - struct ath5k_rx_status *); -static int ath5k_hw_proc_5210_rx_status(struct ath5k_hw *, struct ath5k_desc *, - struct ath5k_rx_status *); -static int ath5k_hw_get_capabilities(struct ath5k_hw *); - -static int ath5k_eeprom_init(struct ath5k_hw *); -static int ath5k_eeprom_read_mac(struct ath5k_hw *, u8 *); - -static int ath5k_hw_enable_pspoll(struct ath5k_hw *, u8 *, u16); -static int ath5k_hw_disable_pspoll(struct ath5k_hw *); - -/* - * Enable to overwrite the country code (use "00" for debug) - */ -#if 0 -#define COUNTRYCODE "00" -#endif - -/*******************\ - General Functions -\*******************/ - -/* - * Functions used internaly - */ - -static inline unsigned int ath5k_hw_htoclock(unsigned int usec, bool turbo) -{ - return turbo ? (usec * 80) : (usec * 40); -} - -static inline unsigned int ath5k_hw_clocktoh(unsigned int clock, bool turbo) -{ - return turbo ? (clock / 80) : (clock / 40); -} - -/* - * Check if a register write has been completed - */ -int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val, - bool is_set) -{ - int i; - u32 data; - - for (i = AR5K_TUNE_REGISTER_TIMEOUT; i > 0; i--) { - data = ath5k_hw_reg_read(ah, reg); - if (is_set && (data & flag)) - break; - else if ((data & flag) == val) - break; - udelay(15); - } - - return (i <= 0) ? -EAGAIN : 0; -} - - -/***************************************\ - Attach/Detach Functions -\***************************************/ - -/* - * Power On Self Test helper function - */ -static int ath5k_hw_post(struct ath5k_hw *ah) -{ - - int i, c; - u16 cur_reg; - u16 regs[2] = {AR5K_STA_ID0, AR5K_PHY(8)}; - u32 var_pattern; - u32 static_pattern[4] = { - 0x55555555, 0xaaaaaaaa, - 0x66666666, 0x99999999 - }; - u32 init_val; - u32 cur_val; - - for (c = 0; c < 2; c++) { - - cur_reg = regs[c]; - - /* Save previous value */ - init_val = ath5k_hw_reg_read(ah, cur_reg); - - for (i = 0; i < 256; i++) { - var_pattern = i << 16 | i; - ath5k_hw_reg_write(ah, var_pattern, cur_reg); - cur_val = ath5k_hw_reg_read(ah, cur_reg); - - if (cur_val != var_pattern) { - ATH5K_ERR(ah->ah_sc, "POST Failed !!!\n"); - return -EAGAIN; - } - - /* Found on ndiswrapper dumps */ - var_pattern = 0x0039080f; - ath5k_hw_reg_write(ah, var_pattern, cur_reg); - } - - for (i = 0; i < 4; i++) { - var_pattern = static_pattern[i]; - ath5k_hw_reg_write(ah, var_pattern, cur_reg); - cur_val = ath5k_hw_reg_read(ah, cur_reg); - - if (cur_val != var_pattern) { - ATH5K_ERR(ah->ah_sc, "POST Failed !!!\n"); - return -EAGAIN; - } - - /* Found on ndiswrapper dumps */ - var_pattern = 0x003b080f; - ath5k_hw_reg_write(ah, var_pattern, cur_reg); - } - - /* Restore previous value */ - ath5k_hw_reg_write(ah, init_val, cur_reg); - - } - - return 0; - -} - -/* - * Check if the device is supported and initialize the needed structs - */ -struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version) -{ - struct ath5k_hw *ah; - struct pci_dev *pdev = sc->pdev; - u8 mac[ETH_ALEN]; - int ret; - u32 srev; - - /*If we passed the test malloc a ath5k_hw struct*/ - ah = kzalloc(sizeof(struct ath5k_hw), GFP_KERNEL); - if (ah == NULL) { - ret = -ENOMEM; - ATH5K_ERR(sc, "out of memory\n"); - goto err; - } - - ah->ah_sc = sc; - ah->ah_iobase = sc->iobase; - - /* - * HW information - */ - - ah->ah_op_mode = IEEE80211_IF_TYPE_STA; - ah->ah_radar.r_enabled = AR5K_TUNE_RADAR_ALERT; - ah->ah_turbo = false; - ah->ah_txpower.txp_tpc = AR5K_TUNE_TPC_TXPOWER; - ah->ah_imr = 0; - ah->ah_atim_window = 0; - ah->ah_aifs = AR5K_TUNE_AIFS; - ah->ah_cw_min = AR5K_TUNE_CWMIN; - ah->ah_limit_tx_retries = AR5K_INIT_TX_RETRY; - ah->ah_software_retry = false; - ah->ah_ant_diversity = AR5K_TUNE_ANT_DIVERSITY; - - /* - * Set the mac revision based on the pci id - */ - ah->ah_version = mac_version; - - /*Fill the ath5k_hw struct with the needed functions*/ - if (ah->ah_version == AR5K_AR5212) - ah->ah_magic = AR5K_EEPROM_MAGIC_5212; - else if (ah->ah_version == AR5K_AR5211) - ah->ah_magic = AR5K_EEPROM_MAGIC_5211; - - if (ah->ah_version == AR5K_AR5212) { - ah->ah_setup_tx_desc = ath5k_hw_setup_4word_tx_desc; - ah->ah_setup_xtx_desc = ath5k_hw_setup_xr_tx_desc; - ah->ah_proc_tx_desc = ath5k_hw_proc_4word_tx_status; - } else { - ah->ah_setup_tx_desc = ath5k_hw_setup_2word_tx_desc; - ah->ah_setup_xtx_desc = ath5k_hw_setup_xr_tx_desc; - ah->ah_proc_tx_desc = ath5k_hw_proc_2word_tx_status; - } - - if (ah->ah_version == AR5K_AR5212) - ah->ah_proc_rx_desc = ath5k_hw_proc_5212_rx_status; - else if (ah->ah_version <= AR5K_AR5211) - ah->ah_proc_rx_desc = ath5k_hw_proc_5210_rx_status; - - /* Bring device out of sleep and reset it's units */ - ret = ath5k_hw_nic_wakeup(ah, AR5K_INIT_MODE, true); - if (ret) - goto err_free; - - /* Get MAC, PHY and RADIO revisions */ - srev = ath5k_hw_reg_read(ah, AR5K_SREV); - ah->ah_mac_srev = srev; - ah->ah_mac_version = AR5K_REG_MS(srev, AR5K_SREV_VER); - ah->ah_mac_revision = AR5K_REG_MS(srev, AR5K_SREV_REV); - ah->ah_phy_revision = ath5k_hw_reg_read(ah, AR5K_PHY_CHIP_ID) & - 0xffffffff; - ah->ah_radio_5ghz_revision = ath5k_hw_radio_revision(ah, - CHANNEL_5GHZ); - - if (ah->ah_version == AR5K_AR5210) - ah->ah_radio_2ghz_revision = 0; - else - ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah, - CHANNEL_2GHZ); - - /* Return on unsuported chips (unsupported eeprom etc) */ - if ((srev >= AR5K_SREV_VER_AR5416) && - (srev < AR5K_SREV_VER_AR2425)) { - ATH5K_ERR(sc, "Device not yet supported.\n"); - ret = -ENODEV; - goto err_free; - } else if (srev == AR5K_SREV_VER_AR2425) { - ATH5K_WARN(sc, "Support for RF2425 is under development.\n"); - } - - /* Identify single chip solutions */ - if (((srev <= AR5K_SREV_VER_AR5414) && - (srev >= AR5K_SREV_VER_AR2413)) || - (srev == AR5K_SREV_VER_AR2425)) { - ah->ah_single_chip = true; - } else { - ah->ah_single_chip = false; - } - - /* Single chip radio */ - if (ah->ah_radio_2ghz_revision == ah->ah_radio_5ghz_revision) - ah->ah_radio_2ghz_revision = 0; - - /* Identify the radio chip*/ - if (ah->ah_version == AR5K_AR5210) { - ah->ah_radio = AR5K_RF5110; - /* - * Register returns 0x0/0x04 for radio revision - * so ath5k_hw_radio_revision doesn't parse the value - * correctly. For now we are based on mac's srev to - * identify RF2425 radio. - */ - } else if (srev == AR5K_SREV_VER_AR2425) { - ah->ah_radio = AR5K_RF2425; - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2425; - } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_5112) { - ah->ah_radio = AR5K_RF5111; - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5111; - } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC0) { - ah->ah_radio = AR5K_RF5112; - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112; - } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC1) { - ah->ah_radio = AR5K_RF2413; - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2413; - } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC2) { - ah->ah_radio = AR5K_RF5413; - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413; - } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_5133) { - /* AR5424 */ - if (srev >= AR5K_SREV_VER_AR5424) { - ah->ah_radio = AR5K_RF5413; - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413; - /* AR2424 */ - } else { - ah->ah_radio = AR5K_RF2413; /* For testing */ - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2413; - } - } - ah->ah_phy = AR5K_PHY(0); - - /* - * Write PCI-E power save settings - */ - if ((ah->ah_version == AR5K_AR5212) && (pdev->is_pcie)) { - ath5k_hw_reg_write(ah, 0x9248fc00, 0x4080); - ath5k_hw_reg_write(ah, 0x24924924, 0x4080); - ath5k_hw_reg_write(ah, 0x28000039, 0x4080); - ath5k_hw_reg_write(ah, 0x53160824, 0x4080); - ath5k_hw_reg_write(ah, 0xe5980579, 0x4080); - ath5k_hw_reg_write(ah, 0x001defff, 0x4080); - ath5k_hw_reg_write(ah, 0x1aaabe40, 0x4080); - ath5k_hw_reg_write(ah, 0xbe105554, 0x4080); - ath5k_hw_reg_write(ah, 0x000e3007, 0x4080); - ath5k_hw_reg_write(ah, 0x00000000, 0x4084); - } - - /* - * POST - */ - ret = ath5k_hw_post(ah); - if (ret) - goto err_free; - - /* Write AR5K_PCICFG_UNK on 2112B and later chips */ - if (ah->ah_radio_5ghz_revision > AR5K_SREV_RAD_2112B || - srev > AR5K_SREV_VER_AR2413) { - ath5k_hw_reg_write(ah, AR5K_PCICFG_UNK, AR5K_PCICFG); - } - - /* - * Get card capabilities, values, ... - */ - ret = ath5k_eeprom_init(ah); - if (ret) { - ATH5K_ERR(sc, "unable to init EEPROM\n"); - goto err_free; - } - - /* Get misc capabilities */ - ret = ath5k_hw_get_capabilities(ah); - if (ret) { - ATH5K_ERR(sc, "unable to get device capabilities: 0x%04x\n", - sc->pdev->device); - goto err_free; - } - - /* Get MAC address */ - ret = ath5k_eeprom_read_mac(ah, mac); - if (ret) { - ATH5K_ERR(sc, "unable to read address from EEPROM: 0x%04x\n", - sc->pdev->device); - goto err_free; - } - - ath5k_hw_set_lladdr(ah, mac); - /* Set BSSID to bcast address: ff:ff:ff:ff:ff:ff for now */ - memset(ah->ah_bssid, 0xff, ETH_ALEN); - ath5k_hw_set_associd(ah, ah->ah_bssid, 0); - ath5k_hw_set_opmode(ah); - - ath5k_hw_set_rfgain_opt(ah); - - return ah; -err_free: - kfree(ah); -err: - return ERR_PTR(ret); -} - -/* - * Bring up MAC + PHY Chips - */ -static int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial) -{ - struct pci_dev *pdev = ah->ah_sc->pdev; - u32 turbo, mode, clock, bus_flags; - int ret; - - turbo = 0; - mode = 0; - clock = 0; - - ATH5K_TRACE(ah->ah_sc); - - /* Wakeup the device */ - ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0); - if (ret) { - ATH5K_ERR(ah->ah_sc, "failed to wakeup the MAC Chip\n"); - return ret; - } - - if (ah->ah_version != AR5K_AR5210) { - /* - * Get channel mode flags - */ - - if (ah->ah_radio >= AR5K_RF5112) { - mode = AR5K_PHY_MODE_RAD_RF5112; - clock = AR5K_PHY_PLL_RF5112; - } else { - mode = AR5K_PHY_MODE_RAD_RF5111; /*Zero*/ - clock = AR5K_PHY_PLL_RF5111; /*Zero*/ - } - - if (flags & CHANNEL_2GHZ) { - mode |= AR5K_PHY_MODE_FREQ_2GHZ; - clock |= AR5K_PHY_PLL_44MHZ; - - if (flags & CHANNEL_CCK) { - mode |= AR5K_PHY_MODE_MOD_CCK; - } else if (flags & CHANNEL_OFDM) { - /* XXX Dynamic OFDM/CCK is not supported by the - * AR5211 so we set MOD_OFDM for plain g (no - * CCK headers) operation. We need to test - * this, 5211 might support ofdm-only g after - * all, there are also initial register values - * in the code for g mode (see initvals.c). */ - if (ah->ah_version == AR5K_AR5211) - mode |= AR5K_PHY_MODE_MOD_OFDM; - else - mode |= AR5K_PHY_MODE_MOD_DYN; - } else { - ATH5K_ERR(ah->ah_sc, - "invalid radio modulation mode\n"); - return -EINVAL; - } - } else if (flags & CHANNEL_5GHZ) { - mode |= AR5K_PHY_MODE_FREQ_5GHZ; - clock |= AR5K_PHY_PLL_40MHZ; - - if (flags & CHANNEL_OFDM) - mode |= AR5K_PHY_MODE_MOD_OFDM; - else { - ATH5K_ERR(ah->ah_sc, - "invalid radio modulation mode\n"); - return -EINVAL; - } - } else { - ATH5K_ERR(ah->ah_sc, "invalid radio frequency mode\n"); - return -EINVAL; - } - - if (flags & CHANNEL_TURBO) - turbo = AR5K_PHY_TURBO_MODE | AR5K_PHY_TURBO_SHORT; - } else { /* Reset the device */ - - /* ...enable Atheros turbo mode if requested */ - if (flags & CHANNEL_TURBO) - ath5k_hw_reg_write(ah, AR5K_PHY_TURBO_MODE, - AR5K_PHY_TURBO); - } - - /* reseting PCI on PCI-E cards results card to hang - * and always return 0xffff... so we ingore that flag - * for PCI-E cards */ - bus_flags = (pdev->is_pcie) ? 0 : AR5K_RESET_CTL_PCI; - - /* Reset chipset */ - ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU | - AR5K_RESET_CTL_BASEBAND | bus_flags); - if (ret) { - ATH5K_ERR(ah->ah_sc, "failed to reset the MAC Chip\n"); - return -EIO; - } - - if (ah->ah_version == AR5K_AR5210) - udelay(2300); - - /* ...wakeup again!*/ - ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0); - if (ret) { - ATH5K_ERR(ah->ah_sc, "failed to resume the MAC Chip\n"); - return ret; - } - - /* ...final warm reset */ - if (ath5k_hw_nic_reset(ah, 0)) { - ATH5K_ERR(ah->ah_sc, "failed to warm reset the MAC Chip\n"); - return -EIO; - } - - if (ah->ah_version != AR5K_AR5210) { - /* ...set the PHY operating mode */ - ath5k_hw_reg_write(ah, clock, AR5K_PHY_PLL); - udelay(300); - - ath5k_hw_reg_write(ah, mode, AR5K_PHY_MODE); - ath5k_hw_reg_write(ah, turbo, AR5K_PHY_TURBO); - } - - return 0; -} - -/* - * Free the ath5k_hw struct - */ -void ath5k_hw_detach(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - - __set_bit(ATH_STAT_INVALID, ah->ah_sc->status); - - if (ah->ah_rf_banks != NULL) - kfree(ah->ah_rf_banks); - - /* assume interrupts are down */ - kfree(ah); -} - -/****************************\ - Reset function and helpers -\****************************/ - -/** - * ath5k_hw_write_ofdm_timings - set OFDM timings on AR5212 - * - * @ah: the &struct ath5k_hw - * @channel: the currently set channel upon reset - * - * Write the OFDM timings for the AR5212 upon reset. This is a helper for - * ath5k_hw_reset(). This seems to tune the PLL a specified frequency - * depending on the bandwidth of the channel. - * - */ -static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah, - struct ieee80211_channel *channel) -{ - /* Get exponent and mantissa and set it */ - u32 coef_scaled, coef_exp, coef_man, - ds_coef_exp, ds_coef_man, clock; - - if (!(ah->ah_version == AR5K_AR5212) || - !(channel->hw_value & CHANNEL_OFDM)) - BUG(); - - /* Seems there are two PLLs, one for baseband sampling and one - * for tuning. Tuning basebands are 40 MHz or 80MHz when in - * turbo. */ - clock = channel->hw_value & CHANNEL_TURBO ? 80 : 40; - coef_scaled = ((5 * (clock << 24)) / 2) / - channel->center_freq; - - for (coef_exp = 31; coef_exp > 0; coef_exp--) - if ((coef_scaled >> coef_exp) & 0x1) - break; - - if (!coef_exp) - return -EINVAL; - - coef_exp = 14 - (coef_exp - 24); - coef_man = coef_scaled + - (1 << (24 - coef_exp - 1)); - ds_coef_man = coef_man >> (24 - coef_exp); - ds_coef_exp = coef_exp - 16; - - AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3, - AR5K_PHY_TIMING_3_DSC_MAN, ds_coef_man); - AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3, - AR5K_PHY_TIMING_3_DSC_EXP, ds_coef_exp); - - return 0; -} - - -/* - * index into rates for control rates, we can set it up like this because - * this is only used for AR5212 and we know it supports G mode - */ -static int control_rates[] = - { 0, 1, 1, 1, 4, 4, 6, 6, 8, 8, 8, 8 }; - -/** - * ath5k_hw_write_rate_duration - set rate duration during hw resets - * - * @ah: the &struct ath5k_hw - * @mode: one of enum ath5k_driver_mode - * - * Write the rate duration table upon hw reset. This is a helper for - * ath5k_hw_reset(). It seems all this is doing is setting an ACK timeout for - * the hardware for the current mode for each rate. The rates which are capable - * of short preamble (802.11b rates 2Mbps, 5.5Mbps, and 11Mbps) have another - * register for the short preamble ACK timeout calculation. - */ -static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah, - unsigned int mode) -{ - struct ath5k_softc *sc = ah->ah_sc; - struct ieee80211_rate *rate; - unsigned int i; - - /* Write rate duration table */ - for (i = 0; i < sc->sbands[IEEE80211_BAND_2GHZ].n_bitrates; i++) { - u32 reg; - u16 tx_time; - - rate = &sc->sbands[IEEE80211_BAND_2GHZ].bitrates[control_rates[i]]; - - /* Set ACK timeout */ - reg = AR5K_RATE_DUR(rate->hw_value); - - /* An ACK frame consists of 10 bytes. If you add the FCS, - * which ieee80211_generic_frame_duration() adds, - * its 14 bytes. Note we use the control rate and not the - * actual rate for this rate. See mac80211 tx.c - * ieee80211_duration() for a brief description of - * what rate we should choose to TX ACKs. */ - tx_time = le16_to_cpu(ieee80211_generic_frame_duration(sc->hw, - sc->vif, 10, rate)); - - ath5k_hw_reg_write(ah, tx_time, reg); - - if (!(rate->flags & IEEE80211_RATE_SHORT_PREAMBLE)) - continue; - - /* - * We're not distinguishing short preamble here, - * This is true, all we'll get is a longer value here - * which is not necessarilly bad. We could use - * export ieee80211_frame_duration() but that needs to be - * fixed first to be properly used by mac802111 drivers: - * - * - remove erp stuff and let the routine figure ofdm - * erp rates - * - remove passing argument ieee80211_local as - * drivers don't have access to it - * - move drivers using ieee80211_generic_frame_duration() - * to this - */ - ath5k_hw_reg_write(ah, tx_time, - reg + (AR5K_SET_SHORT_PREAMBLE << 2)); - } -} - -/* - * Main reset function - */ -int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, - struct ieee80211_channel *channel, bool change_channel) -{ - struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; - struct pci_dev *pdev = ah->ah_sc->pdev; - u32 data, s_seq, s_ant, s_led[3], dma_size; - unsigned int i, mode, freq, ee_mode, ant[2]; - int ret; - - ATH5K_TRACE(ah->ah_sc); - - s_seq = 0; - s_ant = 0; - ee_mode = 0; - freq = 0; - mode = 0; - - /* - * Save some registers before a reset - */ - /*DCU/Antenna selection not available on 5210*/ - if (ah->ah_version != AR5K_AR5210) { - if (change_channel) { - /* Seq number for queue 0 -do this for all queues ? */ - s_seq = ath5k_hw_reg_read(ah, - AR5K_QUEUE_DFS_SEQNUM(0)); - /*Default antenna*/ - s_ant = ath5k_hw_reg_read(ah, AR5K_DEFAULT_ANTENNA); - } - } - - /*GPIOs*/ - s_led[0] = ath5k_hw_reg_read(ah, AR5K_PCICFG) & AR5K_PCICFG_LEDSTATE; - s_led[1] = ath5k_hw_reg_read(ah, AR5K_GPIOCR); - s_led[2] = ath5k_hw_reg_read(ah, AR5K_GPIODO); - - if (change_channel && ah->ah_rf_banks != NULL) - ath5k_hw_get_rf_gain(ah); - - - /*Wakeup the device*/ - ret = ath5k_hw_nic_wakeup(ah, channel->hw_value, false); - if (ret) - return ret; - - /* - * Initialize operating mode - */ - ah->ah_op_mode = op_mode; - - /* - * 5111/5112 Settings - * 5210 only comes with RF5110 - */ - if (ah->ah_version != AR5K_AR5210) { - if (ah->ah_radio != AR5K_RF5111 && - ah->ah_radio != AR5K_RF5112 && - ah->ah_radio != AR5K_RF5413 && - ah->ah_radio != AR5K_RF2413 && - ah->ah_radio != AR5K_RF2425) { - ATH5K_ERR(ah->ah_sc, - "invalid phy radio: %u\n", ah->ah_radio); - return -EINVAL; - } - - switch (channel->hw_value & CHANNEL_MODES) { - case CHANNEL_A: - mode = AR5K_MODE_11A; - freq = AR5K_INI_RFGAIN_5GHZ; - ee_mode = AR5K_EEPROM_MODE_11A; - break; - case CHANNEL_G: - mode = AR5K_MODE_11G; - freq = AR5K_INI_RFGAIN_2GHZ; - ee_mode = AR5K_EEPROM_MODE_11G; - break; - case CHANNEL_B: - mode = AR5K_MODE_11B; - freq = AR5K_INI_RFGAIN_2GHZ; - ee_mode = AR5K_EEPROM_MODE_11B; - break; - case CHANNEL_T: - mode = AR5K_MODE_11A_TURBO; - freq = AR5K_INI_RFGAIN_5GHZ; - ee_mode = AR5K_EEPROM_MODE_11A; - break; - /*Is this ok on 5211 too ?*/ - case CHANNEL_TG: - mode = AR5K_MODE_11G_TURBO; - freq = AR5K_INI_RFGAIN_2GHZ; - ee_mode = AR5K_EEPROM_MODE_11G; - break; - case CHANNEL_XR: - if (ah->ah_version == AR5K_AR5211) { - ATH5K_ERR(ah->ah_sc, - "XR mode not available on 5211"); - return -EINVAL; - } - mode = AR5K_MODE_XR; - freq = AR5K_INI_RFGAIN_5GHZ; - ee_mode = AR5K_EEPROM_MODE_11A; - break; - default: - ATH5K_ERR(ah->ah_sc, - "invalid channel: %d\n", channel->center_freq); - return -EINVAL; - } - - /* PHY access enable */ - ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0)); - - } - - ret = ath5k_hw_write_initvals(ah, mode, change_channel); - if (ret) - return ret; - - /* - * 5211/5212 Specific - */ - if (ah->ah_version != AR5K_AR5210) { - /* - * Write initial RF gain settings - * This should work for both 5111/5112 - */ - ret = ath5k_hw_rfgain(ah, freq); - if (ret) - return ret; - - mdelay(1); - - /* - * Write some more initial register settings - */ - if (ah->ah_version == AR5K_AR5212) { - ath5k_hw_reg_write(ah, 0x0002a002, 0x982c); - - if (channel->hw_value == CHANNEL_G) - if (ah->ah_mac_srev < AR5K_SREV_VER_AR2413) - ath5k_hw_reg_write(ah, 0x00f80d80, - 0x994c); - else if (ah->ah_mac_srev < AR5K_SREV_VER_AR2424) - ath5k_hw_reg_write(ah, 0x00380140, - 0x994c); - else if (ah->ah_mac_srev < AR5K_SREV_VER_AR2425) - ath5k_hw_reg_write(ah, 0x00fc0ec0, - 0x994c); - else /* 2425 */ - ath5k_hw_reg_write(ah, 0x00fc0fc0, - 0x994c); - else - ath5k_hw_reg_write(ah, 0x00000000, 0x994c); - - /* Some bits are disabled here, we know nothing about - * register 0xa228 yet, most of the times this ends up - * with a value 0x9b5 -haven't seen any dump with - * a different value- */ - /* Got this from decompiling binary HAL */ - data = ath5k_hw_reg_read(ah, 0xa228); - data &= 0xfffffdff; - ath5k_hw_reg_write(ah, data, 0xa228); - - data = ath5k_hw_reg_read(ah, 0xa228); - data &= 0xfffe03ff; - ath5k_hw_reg_write(ah, data, 0xa228); - data = 0; - - /* Just write 0x9b5 ? */ - /* ath5k_hw_reg_write(ah, 0x000009b5, 0xa228); */ - ath5k_hw_reg_write(ah, 0x0000000f, AR5K_SEQ_MASK); - ath5k_hw_reg_write(ah, 0x00000000, 0xa254); - ath5k_hw_reg_write(ah, 0x0000000e, AR5K_PHY_SCAL); - } - - /* Fix for first revision of the RF5112 RF chipset */ - if (ah->ah_radio >= AR5K_RF5112 && - ah->ah_radio_5ghz_revision < - AR5K_SREV_RAD_5112A) { - ath5k_hw_reg_write(ah, AR5K_PHY_CCKTXCTL_WORLD, - AR5K_PHY_CCKTXCTL); - if (channel->hw_value & CHANNEL_5GHZ) - data = 0xffb81020; - else - data = 0xffb80d20; - ath5k_hw_reg_write(ah, data, AR5K_PHY_FRAME_CTL); - data = 0; - } - - /* - * Set TX power (FIXME) - */ - ret = ath5k_hw_txpower(ah, channel, AR5K_TUNE_DEFAULT_TXPOWER); - if (ret) - return ret; - - /* Write rate duration table only on AR5212 and if - * virtual interface has already been brought up - * XXX: rethink this after new mode changes to - * mac80211 are integrated */ - if (ah->ah_version == AR5K_AR5212 && - ah->ah_sc->vif != NULL) - ath5k_hw_write_rate_duration(ah, mode); - - /* - * Write RF registers - */ - ret = ath5k_hw_rfregs(ah, channel, mode); - if (ret) - return ret; - - /* - * Configure additional registers - */ - - /* Write OFDM timings on 5212*/ - if (ah->ah_version == AR5K_AR5212 && - channel->hw_value & CHANNEL_OFDM) { - ret = ath5k_hw_write_ofdm_timings(ah, channel); - if (ret) - return ret; - } - - /*Enable/disable 802.11b mode on 5111 - (enable 2111 frequency converter + CCK)*/ - if (ah->ah_radio == AR5K_RF5111) { - if (mode == AR5K_MODE_11B) - AR5K_REG_ENABLE_BITS(ah, AR5K_TXCFG, - AR5K_TXCFG_B_MODE); - else - AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG, - AR5K_TXCFG_B_MODE); - } - - /* - * Set channel and calibrate the PHY - */ - ret = ath5k_hw_channel(ah, channel); - if (ret) - return ret; - - /* Set antenna mode */ - AR5K_REG_MASKED_BITS(ah, AR5K_PHY_ANT_CTL, - ah->ah_antenna[ee_mode][0], 0xfffffc06); - - /* - * In case a fixed antenna was set as default - * write the same settings on both AR5K_PHY_ANT_SWITCH_TABLE - * registers. - */ - if (s_ant != 0){ - if (s_ant == AR5K_ANT_FIXED_A) /* 1 - Main */ - ant[0] = ant[1] = AR5K_ANT_FIXED_A; - else /* 2 - Aux */ - ant[0] = ant[1] = AR5K_ANT_FIXED_B; - } else { - ant[0] = AR5K_ANT_FIXED_A; - ant[1] = AR5K_ANT_FIXED_B; - } - - ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[0]], - AR5K_PHY_ANT_SWITCH_TABLE_0); - ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[1]], - AR5K_PHY_ANT_SWITCH_TABLE_1); - - /* Commit values from EEPROM */ - if (ah->ah_radio == AR5K_RF5111) - AR5K_REG_WRITE_BITS(ah, AR5K_PHY_FRAME_CTL, - AR5K_PHY_FRAME_CTL_TX_CLIP, ee->ee_tx_clip); - - ath5k_hw_reg_write(ah, - AR5K_PHY_NF_SVAL(ee->ee_noise_floor_thr[ee_mode]), - AR5K_PHY_NFTHRES); - - AR5K_REG_MASKED_BITS(ah, AR5K_PHY_SETTLING, - (ee->ee_switch_settling[ee_mode] << 7) & 0x3f80, - 0xffffc07f); - AR5K_REG_MASKED_BITS(ah, AR5K_PHY_GAIN, - (ee->ee_ant_tx_rx[ee_mode] << 12) & 0x3f000, - 0xfffc0fff); - AR5K_REG_MASKED_BITS(ah, AR5K_PHY_DESIRED_SIZE, - (ee->ee_adc_desired_size[ee_mode] & 0x00ff) | - ((ee->ee_pga_desired_size[ee_mode] << 8) & 0xff00), - 0xffff0000); - - ath5k_hw_reg_write(ah, - (ee->ee_tx_end2xpa_disable[ee_mode] << 24) | - (ee->ee_tx_end2xpa_disable[ee_mode] << 16) | - (ee->ee_tx_frm2xpa_enable[ee_mode] << 8) | - (ee->ee_tx_frm2xpa_enable[ee_mode]), AR5K_PHY_RF_CTL4); - - AR5K_REG_MASKED_BITS(ah, AR5K_PHY_RF_CTL3, - ee->ee_tx_end2xlna_enable[ee_mode] << 8, 0xffff00ff); - AR5K_REG_MASKED_BITS(ah, AR5K_PHY_NF, - (ee->ee_thr_62[ee_mode] << 12) & 0x7f000, 0xfff80fff); - AR5K_REG_MASKED_BITS(ah, AR5K_PHY_OFDM_SELFCORR, 4, 0xffffff01); - - AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, - AR5K_PHY_IQ_CORR_ENABLE | - (ee->ee_i_cal[ee_mode] << AR5K_PHY_IQ_CORR_Q_I_COFF_S) | - ee->ee_q_cal[ee_mode]); - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) - AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN_2GHZ, - AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX, - ee->ee_margin_tx_rx[ee_mode]); - - } else { - mdelay(1); - /* Disable phy and wait */ - ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT); - mdelay(1); - } - - /* - * Restore saved values - */ - /*DCU/Antenna selection not available on 5210*/ - if (ah->ah_version != AR5K_AR5210) { - ath5k_hw_reg_write(ah, s_seq, AR5K_QUEUE_DFS_SEQNUM(0)); - ath5k_hw_reg_write(ah, s_ant, AR5K_DEFAULT_ANTENNA); - } - AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, s_led[0]); - ath5k_hw_reg_write(ah, s_led[1], AR5K_GPIOCR); - ath5k_hw_reg_write(ah, s_led[2], AR5K_GPIODO); - - /* - * Misc - */ - /* XXX: add ah->aid once mac80211 gives this to us */ - ath5k_hw_set_associd(ah, ah->ah_bssid, 0); - - ath5k_hw_set_opmode(ah); - /*PISR/SISR Not available on 5210*/ - if (ah->ah_version != AR5K_AR5210) { - ath5k_hw_reg_write(ah, 0xffffffff, AR5K_PISR); - /* If we later allow tuning for this, store into sc structure */ - data = AR5K_TUNE_RSSI_THRES | - AR5K_TUNE_BMISS_THRES << AR5K_RSSI_THR_BMISS_S; - ath5k_hw_reg_write(ah, data, AR5K_RSSI_THR); - } - - /* - * Set Rx/Tx DMA Configuration - * - * Set maximum DMA size (512) except for PCI-E cards since - * it causes rx overruns and tx errors (tested on 5424 but since - * rx overruns also occur on 5416/5418 with madwifi we set 128 - * for all PCI-E cards to be safe). - * - * In dumps this is 128 for allchips. - * - * XXX: need to check 5210 for this - * TODO: Check out tx triger level, it's always 64 on dumps but I - * guess we can tweak it and see how it goes ;-) - */ - dma_size = (pdev->is_pcie) ? AR5K_DMASIZE_128B : AR5K_DMASIZE_512B; - if (ah->ah_version != AR5K_AR5210) { - AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG, - AR5K_TXCFG_SDMAMR, dma_size); - AR5K_REG_WRITE_BITS(ah, AR5K_RXCFG, - AR5K_RXCFG_SDMAMW, dma_size); - } - - /* - * Enable the PHY and wait until completion - */ - ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT); - - /* - * On 5211+ read activation -> rx delay - * and use it. - */ - if (ah->ah_version != AR5K_AR5210) { - data = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) & - AR5K_PHY_RX_DELAY_M; - data = (channel->hw_value & CHANNEL_CCK) ? - ((data << 2) / 22) : (data / 10); - - udelay(100 + (2 * data)); - data = 0; - } else { - mdelay(1); - } - - /* - * Perform ADC test (?) - */ - data = ath5k_hw_reg_read(ah, AR5K_PHY_TST1); - ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1); - for (i = 0; i <= 20; i++) { - if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10)) - break; - udelay(200); - } - ath5k_hw_reg_write(ah, data, AR5K_PHY_TST1); - data = 0; - - /* - * Start automatic gain calibration - * - * During AGC calibration RX path is re-routed to - * a signal detector so we don't receive anything. - * - * This method is used to calibrate some static offsets - * used together with on-the fly I/Q calibration (the - * one performed via ath5k_hw_phy_calibrate), that doesn't - * interrupt rx path. - * - * If we are in a noisy environment AGC calibration may time - * out. - */ - AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, - AR5K_PHY_AGCCTL_CAL); - - /* At the same time start I/Q calibration for QAM constellation - * -no need for CCK- */ - ah->ah_calibration = false; - if (!(mode == AR5K_MODE_11B)) { - ah->ah_calibration = true; - AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, - AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15); - AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, - AR5K_PHY_IQ_RUN); - } - - /* Wait for gain calibration to finish (we check for I/Q calibration - * during ath5k_phy_calibrate) */ - if (ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL, - AR5K_PHY_AGCCTL_CAL, 0, false)) { - ATH5K_ERR(ah->ah_sc, "gain calibration timeout (%uMHz)\n", - channel->center_freq); - return -EAGAIN; - } - - /* - * Start noise floor calibration - * - * If we run NF calibration before AGC, it always times out. - * Binary HAL starts NF and AGC calibration at the same time - * and only waits for AGC to finish. I believe that's wrong because - * during NF calibration, rx path is also routed to a detector, so if - * it doesn't finish we won't have RX. - * - * XXX: Find an interval that's OK for all cards... - */ - ret = ath5k_hw_noise_floor_calibration(ah, channel->center_freq); - if (ret) - return ret; - - /* - * Reset queues and start beacon timers at the end of the reset routine - */ - for (i = 0; i < ah->ah_capabilities.cap_queues.q_tx_num; i++) { - /*No QCU on 5210*/ - if (ah->ah_version != AR5K_AR5210) - AR5K_REG_WRITE_Q(ah, AR5K_QUEUE_QCUMASK(i), i); - - ret = ath5k_hw_reset_tx_queue(ah, i); - if (ret) { - ATH5K_ERR(ah->ah_sc, - "failed to reset TX queue #%d\n", i); - return ret; - } - } - - /* Pre-enable interrupts on 5211/5212*/ - if (ah->ah_version != AR5K_AR5210) - ath5k_hw_set_intr(ah, AR5K_INT_RX | AR5K_INT_TX | - AR5K_INT_FATAL); - - /* - * Set RF kill flags if supported by the device (read from the EEPROM) - * Disable gpio_intr for now since it results system hang. - * TODO: Handle this in ath5k_intr - */ -#if 0 - if (AR5K_EEPROM_HDR_RFKILL(ah->ah_capabilities.cap_eeprom.ee_header)) { - ath5k_hw_set_gpio_input(ah, 0); - ah->ah_gpio[0] = ath5k_hw_get_gpio(ah, 0); - if (ah->ah_gpio[0] == 0) - ath5k_hw_set_gpio_intr(ah, 0, 1); - else - ath5k_hw_set_gpio_intr(ah, 0, 0); - } -#endif - - /* - * Set the 32MHz reference clock on 5212 phy clock sleep register - * - * TODO: Find out how to switch to external 32Khz clock to save power - */ - if (ah->ah_version == AR5K_AR5212) { - ath5k_hw_reg_write(ah, AR5K_PHY_SCR_32MHZ, AR5K_PHY_SCR); - ath5k_hw_reg_write(ah, AR5K_PHY_SLMT_32MHZ, AR5K_PHY_SLMT); - ath5k_hw_reg_write(ah, AR5K_PHY_SCAL_32MHZ, AR5K_PHY_SCAL); - ath5k_hw_reg_write(ah, AR5K_PHY_SCLOCK_32MHZ, AR5K_PHY_SCLOCK); - ath5k_hw_reg_write(ah, AR5K_PHY_SDELAY_32MHZ, AR5K_PHY_SDELAY); - ath5k_hw_reg_write(ah, ah->ah_phy_spending, AR5K_PHY_SPENDING); - - data = ath5k_hw_reg_read(ah, AR5K_USEC_5211) & 0xffffc07f ; - data |= (ah->ah_phy_spending == AR5K_PHY_SPENDING_18) ? - 0x00000f80 : 0x00001380 ; - ath5k_hw_reg_write(ah, data, AR5K_USEC_5211); - data = 0; - } - - if (ah->ah_version == AR5K_AR5212) { - ath5k_hw_reg_write(ah, 0x000100aa, 0x8118); - ath5k_hw_reg_write(ah, 0x00003210, 0x811c); - ath5k_hw_reg_write(ah, 0x00000052, 0x8108); - if (ah->ah_mac_srev >= AR5K_SREV_VER_AR2413) - ath5k_hw_reg_write(ah, 0x00000004, 0x8120); - } - - /* - * Disable beacons and reset the register - */ - AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE | - AR5K_BEACON_RESET_TSF); - - return 0; -} - -/* - * Reset chipset - */ -static int ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val) -{ - int ret; - u32 mask = val ? val : ~0U; - - ATH5K_TRACE(ah->ah_sc); - - /* Read-and-clear RX Descriptor Pointer*/ - ath5k_hw_reg_read(ah, AR5K_RXDP); - - /* - * Reset the device and wait until success - */ - ath5k_hw_reg_write(ah, val, AR5K_RESET_CTL); - - /* Wait at least 128 PCI clocks */ - udelay(15); - - if (ah->ah_version == AR5K_AR5210) { - val &= AR5K_RESET_CTL_CHIP; - mask &= AR5K_RESET_CTL_CHIP; - } else { - val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND; - mask &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND; - } - - ret = ath5k_hw_register_timeout(ah, AR5K_RESET_CTL, mask, val, false); - - /* - * Reset configuration register (for hw byte-swap). Note that this - * is only set for big endian. We do the necessary magic in - * AR5K_INIT_CFG. - */ - if ((val & AR5K_RESET_CTL_PCU) == 0) - ath5k_hw_reg_write(ah, AR5K_INIT_CFG, AR5K_CFG); - - return ret; -} - -/* - * Power management functions - */ - -/* - * Sleep control - */ -int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, - bool set_chip, u16 sleep_duration) -{ - unsigned int i; - u32 staid, data; - - ATH5K_TRACE(ah->ah_sc); - staid = ath5k_hw_reg_read(ah, AR5K_STA_ID1); - - switch (mode) { - case AR5K_PM_AUTO: - staid &= ~AR5K_STA_ID1_DEFAULT_ANTENNA; - /* fallthrough */ - case AR5K_PM_NETWORK_SLEEP: - if (set_chip) - ath5k_hw_reg_write(ah, - AR5K_SLEEP_CTL_SLE_ALLOW | - sleep_duration, - AR5K_SLEEP_CTL); - - staid |= AR5K_STA_ID1_PWR_SV; - break; - - case AR5K_PM_FULL_SLEEP: - if (set_chip) - ath5k_hw_reg_write(ah, AR5K_SLEEP_CTL_SLE_SLP, - AR5K_SLEEP_CTL); - - staid |= AR5K_STA_ID1_PWR_SV; - break; - - case AR5K_PM_AWAKE: - - staid &= ~AR5K_STA_ID1_PWR_SV; - - if (!set_chip) - goto commit; - - /* Preserve sleep duration */ - data = ath5k_hw_reg_read(ah, AR5K_SLEEP_CTL); - if( data & 0xffc00000 ){ - data = 0; - } else { - data = data & 0xfffcffff; - } - - ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL); - udelay(15); - - for (i = 50; i > 0; i--) { - /* Check if the chip did wake up */ - if ((ath5k_hw_reg_read(ah, AR5K_PCICFG) & - AR5K_PCICFG_SPWR_DN) == 0) - break; - - /* Wait a bit and retry */ - udelay(200); - ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL); - } - - /* Fail if the chip didn't wake up */ - if (i <= 0) - return -EIO; - - break; - - default: - return -EINVAL; - } - -commit: - ah->ah_power_mode = mode; - ath5k_hw_reg_write(ah, staid, AR5K_STA_ID1); - - return 0; -} - -/***********************\ - DMA Related Functions -\***********************/ - -/* - * Receive functions - */ - -/* - * Start DMA receive - */ -void ath5k_hw_start_rx(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - ath5k_hw_reg_write(ah, AR5K_CR_RXE, AR5K_CR); - ath5k_hw_reg_read(ah, AR5K_CR); -} - -/* - * Stop DMA receive - */ -int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah) -{ - unsigned int i; - - ATH5K_TRACE(ah->ah_sc); - ath5k_hw_reg_write(ah, AR5K_CR_RXD, AR5K_CR); - - /* - * It may take some time to disable the DMA receive unit - */ - for (i = 2000; i > 0 && - (ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_CR_RXE) != 0; - i--) - udelay(10); - - return i ? 0 : -EBUSY; -} - -/* - * Get the address of the RX Descriptor - */ -u32 ath5k_hw_get_rx_buf(struct ath5k_hw *ah) -{ - return ath5k_hw_reg_read(ah, AR5K_RXDP); -} - -/* - * Set the address of the RX Descriptor - */ -void ath5k_hw_put_rx_buf(struct ath5k_hw *ah, u32 phys_addr) -{ - ATH5K_TRACE(ah->ah_sc); - - /*TODO:Shouldn't we check if RX is enabled first ?*/ - ath5k_hw_reg_write(ah, phys_addr, AR5K_RXDP); -} - -/* - * Transmit functions - */ - -/* - * Start DMA transmit for a specific queue - * (see also QCU/DCU functions) - */ -int ath5k_hw_tx_start(struct ath5k_hw *ah, unsigned int queue) -{ - u32 tx_queue; - - ATH5K_TRACE(ah->ah_sc); - AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); - - /* Return if queue is declared inactive */ - if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) - return -EIO; - - if (ah->ah_version == AR5K_AR5210) { - tx_queue = ath5k_hw_reg_read(ah, AR5K_CR); - - /* - * Set the queue by type on 5210 - */ - switch (ah->ah_txq[queue].tqi_type) { - case AR5K_TX_QUEUE_DATA: - tx_queue |= AR5K_CR_TXE0 & ~AR5K_CR_TXD0; - break; - case AR5K_TX_QUEUE_BEACON: - tx_queue |= AR5K_CR_TXE1 & ~AR5K_CR_TXD1; - ath5k_hw_reg_write(ah, AR5K_BCR_TQ1V | AR5K_BCR_BDMAE, - AR5K_BSR); - break; - case AR5K_TX_QUEUE_CAB: - tx_queue |= AR5K_CR_TXE1 & ~AR5K_CR_TXD1; - ath5k_hw_reg_write(ah, AR5K_BCR_TQ1FV | AR5K_BCR_TQ1V | - AR5K_BCR_BDMAE, AR5K_BSR); - break; - default: - return -EINVAL; - } - /* Start queue */ - ath5k_hw_reg_write(ah, tx_queue, AR5K_CR); - ath5k_hw_reg_read(ah, AR5K_CR); - } else { - /* Return if queue is disabled */ - if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXD, queue)) - return -EIO; - - /* Start queue */ - AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXE, queue); - } - - return 0; -} - -/* - * Stop DMA transmit for a specific queue - * (see also QCU/DCU functions) - */ -int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue) -{ - unsigned int i = 100; - u32 tx_queue, pending; - - ATH5K_TRACE(ah->ah_sc); - AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); - - /* Return if queue is declared inactive */ - if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) - return -EIO; - - if (ah->ah_version == AR5K_AR5210) { - tx_queue = ath5k_hw_reg_read(ah, AR5K_CR); - - /* - * Set by queue type - */ - switch (ah->ah_txq[queue].tqi_type) { - case AR5K_TX_QUEUE_DATA: - tx_queue |= AR5K_CR_TXD0 & ~AR5K_CR_TXE0; - break; - case AR5K_TX_QUEUE_BEACON: - case AR5K_TX_QUEUE_CAB: - /* XXX Fix me... */ - tx_queue |= AR5K_CR_TXD1 & ~AR5K_CR_TXD1; - ath5k_hw_reg_write(ah, 0, AR5K_BSR); - break; - default: - return -EINVAL; - } - - /* Stop queue */ - ath5k_hw_reg_write(ah, tx_queue, AR5K_CR); - ath5k_hw_reg_read(ah, AR5K_CR); - } else { - /* - * Schedule TX disable and wait until queue is empty - */ - AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXD, queue); - - /*Check for pending frames*/ - do { - pending = ath5k_hw_reg_read(ah, - AR5K_QUEUE_STATUS(queue)) & - AR5K_QCU_STS_FRMPENDCNT; - udelay(100); - } while (--i && pending); - - /* Clear register */ - ath5k_hw_reg_write(ah, 0, AR5K_QCU_TXD); - if (pending) - return -EBUSY; - } - - /* TODO: Check for success else return error */ - return 0; -} - -/* - * Get the address of the TX Descriptor for a specific queue - * (see also QCU/DCU functions) - */ -u32 ath5k_hw_get_tx_buf(struct ath5k_hw *ah, unsigned int queue) -{ - u16 tx_reg; - - ATH5K_TRACE(ah->ah_sc); - AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); - - /* - * Get the transmit queue descriptor pointer from the selected queue - */ - /*5210 doesn't have QCU*/ - if (ah->ah_version == AR5K_AR5210) { - switch (ah->ah_txq[queue].tqi_type) { - case AR5K_TX_QUEUE_DATA: - tx_reg = AR5K_NOQCU_TXDP0; - break; - case AR5K_TX_QUEUE_BEACON: - case AR5K_TX_QUEUE_CAB: - tx_reg = AR5K_NOQCU_TXDP1; - break; - default: - return 0xffffffff; - } - } else { - tx_reg = AR5K_QUEUE_TXDP(queue); - } - - return ath5k_hw_reg_read(ah, tx_reg); -} - -/* - * Set the address of the TX Descriptor for a specific queue - * (see also QCU/DCU functions) - */ -int ath5k_hw_put_tx_buf(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr) -{ - u16 tx_reg; - - ATH5K_TRACE(ah->ah_sc); - AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); - - /* - * Set the transmit queue descriptor pointer register by type - * on 5210 - */ - if (ah->ah_version == AR5K_AR5210) { - switch (ah->ah_txq[queue].tqi_type) { - case AR5K_TX_QUEUE_DATA: - tx_reg = AR5K_NOQCU_TXDP0; - break; - case AR5K_TX_QUEUE_BEACON: - case AR5K_TX_QUEUE_CAB: - tx_reg = AR5K_NOQCU_TXDP1; - break; - default: - return -EINVAL; - } - } else { - /* - * Set the transmit queue descriptor pointer for - * the selected queue on QCU for 5211+ - * (this won't work if the queue is still active) - */ - if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, queue)) - return -EIO; - - tx_reg = AR5K_QUEUE_TXDP(queue); - } - - /* Set descriptor pointer */ - ath5k_hw_reg_write(ah, phys_addr, tx_reg); - - return 0; -} - -/* - * Update tx trigger level - */ -int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase) -{ - u32 trigger_level, imr; - int ret = -EIO; - - ATH5K_TRACE(ah->ah_sc); - - /* - * Disable interrupts by setting the mask - */ - imr = ath5k_hw_set_intr(ah, ah->ah_imr & ~AR5K_INT_GLOBAL); - - /*TODO: Boundary check on trigger_level*/ - trigger_level = AR5K_REG_MS(ath5k_hw_reg_read(ah, AR5K_TXCFG), - AR5K_TXCFG_TXFULL); - - if (!increase) { - if (--trigger_level < AR5K_TUNE_MIN_TX_FIFO_THRES) - goto done; - } else - trigger_level += - ((AR5K_TUNE_MAX_TX_FIFO_THRES - trigger_level) / 2); - - /* - * Update trigger level on success - */ - if (ah->ah_version == AR5K_AR5210) - ath5k_hw_reg_write(ah, trigger_level, AR5K_TRIG_LVL); - else - AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG, - AR5K_TXCFG_TXFULL, trigger_level); - - ret = 0; - -done: - /* - * Restore interrupt mask - */ - ath5k_hw_set_intr(ah, imr); - - return ret; -} - -/* - * Interrupt handling - */ - -/* - * Check if we have pending interrupts - */ -bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - return ath5k_hw_reg_read(ah, AR5K_INTPEND); -} - -/* - * Get interrupt mask (ISR) - */ -int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask) -{ - u32 data; - - ATH5K_TRACE(ah->ah_sc); - - /* - * Read interrupt status from the Interrupt Status register - * on 5210 - */ - if (ah->ah_version == AR5K_AR5210) { - data = ath5k_hw_reg_read(ah, AR5K_ISR); - if (unlikely(data == AR5K_INT_NOCARD)) { - *interrupt_mask = data; - return -ENODEV; - } - } else { - /* - * Read interrupt status from the Read-And-Clear shadow register - * Note: PISR/SISR Not available on 5210 - */ - data = ath5k_hw_reg_read(ah, AR5K_RAC_PISR); - } - - /* - * Get abstract interrupt mask (driver-compatible) - */ - *interrupt_mask = (data & AR5K_INT_COMMON) & ah->ah_imr; - - if (unlikely(data == AR5K_INT_NOCARD)) - return -ENODEV; - - if (data & (AR5K_ISR_RXOK | AR5K_ISR_RXERR)) - *interrupt_mask |= AR5K_INT_RX; - - if (data & (AR5K_ISR_TXOK | AR5K_ISR_TXERR - | AR5K_ISR_TXDESC | AR5K_ISR_TXEOL)) - *interrupt_mask |= AR5K_INT_TX; - - if (ah->ah_version != AR5K_AR5210) { - /*HIU = Host Interface Unit (PCI etc)*/ - if (unlikely(data & (AR5K_ISR_HIUERR))) - *interrupt_mask |= AR5K_INT_FATAL; - - /*Beacon Not Ready*/ - if (unlikely(data & (AR5K_ISR_BNR))) - *interrupt_mask |= AR5K_INT_BNR; - } - - /* - * XXX: BMISS interrupts may occur after association. - * I found this on 5210 code but it needs testing. If this is - * true we should disable them before assoc and re-enable them - * after a successfull assoc + some jiffies. - */ -#if 0 - interrupt_mask &= ~AR5K_INT_BMISS; -#endif - - /* - * In case we didn't handle anything, - * print the register value. - */ - if (unlikely(*interrupt_mask == 0 && net_ratelimit())) - ATH5K_PRINTF("0x%08x\n", data); - - return 0; -} - -/* - * Set interrupt mask - */ -enum ath5k_int ath5k_hw_set_intr(struct ath5k_hw *ah, enum ath5k_int new_mask) -{ - enum ath5k_int old_mask, int_mask; - - /* - * Disable card interrupts to prevent any race conditions - * (they will be re-enabled afterwards). - */ - ath5k_hw_reg_write(ah, AR5K_IER_DISABLE, AR5K_IER); - ath5k_hw_reg_read(ah, AR5K_IER); - - old_mask = ah->ah_imr; - - /* - * Add additional, chipset-dependent interrupt mask flags - * and write them to the IMR (interrupt mask register). - */ - int_mask = new_mask & AR5K_INT_COMMON; - - if (new_mask & AR5K_INT_RX) - int_mask |= AR5K_IMR_RXOK | AR5K_IMR_RXERR | AR5K_IMR_RXORN | - AR5K_IMR_RXDESC; - - if (new_mask & AR5K_INT_TX) - int_mask |= AR5K_IMR_TXOK | AR5K_IMR_TXERR | AR5K_IMR_TXDESC | - AR5K_IMR_TXURN; - - if (ah->ah_version != AR5K_AR5210) { - if (new_mask & AR5K_INT_FATAL) { - int_mask |= AR5K_IMR_HIUERR; - AR5K_REG_ENABLE_BITS(ah, AR5K_SIMR2, AR5K_SIMR2_MCABT | - AR5K_SIMR2_SSERR | AR5K_SIMR2_DPERR); - } - } - - ath5k_hw_reg_write(ah, int_mask, AR5K_PIMR); - - /* Store new interrupt mask */ - ah->ah_imr = new_mask; - - /* ..re-enable interrupts */ - ath5k_hw_reg_write(ah, AR5K_IER_ENABLE, AR5K_IER); - ath5k_hw_reg_read(ah, AR5K_IER); - - return old_mask; -} - - -/*************************\ - EEPROM access functions -\*************************/ - -/* - * Read from eeprom - */ -static int ath5k_hw_eeprom_read(struct ath5k_hw *ah, u32 offset, u16 *data) -{ - u32 status, timeout; - - ATH5K_TRACE(ah->ah_sc); - /* - * Initialize EEPROM access - */ - if (ah->ah_version == AR5K_AR5210) { - AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_EEAE); - (void)ath5k_hw_reg_read(ah, AR5K_EEPROM_BASE + (4 * offset)); - } else { - ath5k_hw_reg_write(ah, offset, AR5K_EEPROM_BASE); - AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD, - AR5K_EEPROM_CMD_READ); - } - - for (timeout = AR5K_TUNE_REGISTER_TIMEOUT; timeout > 0; timeout--) { - status = ath5k_hw_reg_read(ah, AR5K_EEPROM_STATUS); - if (status & AR5K_EEPROM_STAT_RDDONE) { - if (status & AR5K_EEPROM_STAT_RDERR) - return -EIO; - *data = (u16)(ath5k_hw_reg_read(ah, AR5K_EEPROM_DATA) & - 0xffff); - return 0; - } - udelay(15); - } - - return -ETIMEDOUT; -} - -/* - * Write to eeprom - currently disabled, use at your own risk - */ -#if 0 -static int ath5k_hw_eeprom_write(struct ath5k_hw *ah, u32 offset, u16 data) -{ - - u32 status, timeout; - - ATH5K_TRACE(ah->ah_sc); - - /* - * Initialize eeprom access - */ - - if (ah->ah_version == AR5K_AR5210) { - AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_EEAE); - } else { - AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD, - AR5K_EEPROM_CMD_RESET); - } - - /* - * Write data to data register - */ - - if (ah->ah_version == AR5K_AR5210) { - ath5k_hw_reg_write(ah, data, AR5K_EEPROM_BASE + (4 * offset)); - } else { - ath5k_hw_reg_write(ah, offset, AR5K_EEPROM_BASE); - ath5k_hw_reg_write(ah, data, AR5K_EEPROM_DATA); - AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD, - AR5K_EEPROM_CMD_WRITE); - } - - /* - * Check status - */ - - for (timeout = AR5K_TUNE_REGISTER_TIMEOUT; timeout > 0; timeout--) { - status = ath5k_hw_reg_read(ah, AR5K_EEPROM_STATUS); - if (status & AR5K_EEPROM_STAT_WRDONE) { - if (status & AR5K_EEPROM_STAT_WRERR) - return EIO; - return 0; - } - udelay(15); - } - - ATH5K_ERR(ah->ah_sc, "EEPROM Write is disabled!"); - return -EIO; -} -#endif - -/* - * Translate binary channel representation in EEPROM to frequency - */ -static u16 ath5k_eeprom_bin2freq(struct ath5k_hw *ah, u16 bin, unsigned int mode) -{ - u16 val; - - if (bin == AR5K_EEPROM_CHANNEL_DIS) - return bin; - - if (mode == AR5K_EEPROM_MODE_11A) { - if (ah->ah_ee_version > AR5K_EEPROM_VERSION_3_2) - val = (5 * bin) + 4800; - else - val = bin > 62 ? (10 * 62) + (5 * (bin - 62)) + 5100 : - (bin * 10) + 5100; - } else { - if (ah->ah_ee_version > AR5K_EEPROM_VERSION_3_2) - val = bin + 2300; - else - val = bin + 2400; - } - - return val; -} - -/* - * Read antenna infos from eeprom - */ -static int ath5k_eeprom_read_ants(struct ath5k_hw *ah, u32 *offset, - unsigned int mode) -{ - struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; - u32 o = *offset; - u16 val; - int ret, i = 0; - - AR5K_EEPROM_READ(o++, val); - ee->ee_switch_settling[mode] = (val >> 8) & 0x7f; - ee->ee_ant_tx_rx[mode] = (val >> 2) & 0x3f; - ee->ee_ant_control[mode][i] = (val << 4) & 0x3f; - - AR5K_EEPROM_READ(o++, val); - ee->ee_ant_control[mode][i++] |= (val >> 12) & 0xf; - ee->ee_ant_control[mode][i++] = (val >> 6) & 0x3f; - ee->ee_ant_control[mode][i++] = val & 0x3f; - - AR5K_EEPROM_READ(o++, val); - ee->ee_ant_control[mode][i++] = (val >> 10) & 0x3f; - ee->ee_ant_control[mode][i++] = (val >> 4) & 0x3f; - ee->ee_ant_control[mode][i] = (val << 2) & 0x3f; - - AR5K_EEPROM_READ(o++, val); - ee->ee_ant_control[mode][i++] |= (val >> 14) & 0x3; - ee->ee_ant_control[mode][i++] = (val >> 8) & 0x3f; - ee->ee_ant_control[mode][i++] = (val >> 2) & 0x3f; - ee->ee_ant_control[mode][i] = (val << 4) & 0x3f; - - AR5K_EEPROM_READ(o++, val); - ee->ee_ant_control[mode][i++] |= (val >> 12) & 0xf; - ee->ee_ant_control[mode][i++] = (val >> 6) & 0x3f; - ee->ee_ant_control[mode][i++] = val & 0x3f; - - /* Get antenna modes */ - ah->ah_antenna[mode][0] = - (ee->ee_ant_control[mode][0] << 4) | 0x1; - ah->ah_antenna[mode][AR5K_ANT_FIXED_A] = - ee->ee_ant_control[mode][1] | - (ee->ee_ant_control[mode][2] << 6) | - (ee->ee_ant_control[mode][3] << 12) | - (ee->ee_ant_control[mode][4] << 18) | - (ee->ee_ant_control[mode][5] << 24); - ah->ah_antenna[mode][AR5K_ANT_FIXED_B] = - ee->ee_ant_control[mode][6] | - (ee->ee_ant_control[mode][7] << 6) | - (ee->ee_ant_control[mode][8] << 12) | - (ee->ee_ant_control[mode][9] << 18) | - (ee->ee_ant_control[mode][10] << 24); - - /* return new offset */ - *offset = o; - - return 0; -} - -/* - * Read supported modes from eeprom - */ -static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset, - unsigned int mode) -{ - struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; - u32 o = *offset; - u16 val; - int ret; - - AR5K_EEPROM_READ(o++, val); - ee->ee_tx_end2xlna_enable[mode] = (val >> 8) & 0xff; - ee->ee_thr_62[mode] = val & 0xff; - - if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2) - ee->ee_thr_62[mode] = mode == AR5K_EEPROM_MODE_11A ? 15 : 28; - - AR5K_EEPROM_READ(o++, val); - ee->ee_tx_end2xpa_disable[mode] = (val >> 8) & 0xff; - ee->ee_tx_frm2xpa_enable[mode] = val & 0xff; - - AR5K_EEPROM_READ(o++, val); - ee->ee_pga_desired_size[mode] = (val >> 8) & 0xff; - - if ((val & 0xff) & 0x80) - ee->ee_noise_floor_thr[mode] = -((((val & 0xff) ^ 0xff)) + 1); - else - ee->ee_noise_floor_thr[mode] = val & 0xff; - - if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2) - ee->ee_noise_floor_thr[mode] = - mode == AR5K_EEPROM_MODE_11A ? -54 : -1; - - AR5K_EEPROM_READ(o++, val); - ee->ee_xlna_gain[mode] = (val >> 5) & 0xff; - ee->ee_x_gain[mode] = (val >> 1) & 0xf; - ee->ee_xpd[mode] = val & 0x1; - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) - ee->ee_fixed_bias[mode] = (val >> 13) & 0x1; - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_3_3) { - AR5K_EEPROM_READ(o++, val); - ee->ee_false_detect[mode] = (val >> 6) & 0x7f; - - if (mode == AR5K_EEPROM_MODE_11A) - ee->ee_xr_power[mode] = val & 0x3f; - else { - ee->ee_ob[mode][0] = val & 0x7; - ee->ee_db[mode][0] = (val >> 3) & 0x7; - } - } - - if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_4) { - ee->ee_i_gain[mode] = AR5K_EEPROM_I_GAIN; - ee->ee_cck_ofdm_power_delta = AR5K_EEPROM_CCK_OFDM_DELTA; - } else { - ee->ee_i_gain[mode] = (val >> 13) & 0x7; - - AR5K_EEPROM_READ(o++, val); - ee->ee_i_gain[mode] |= (val << 3) & 0x38; - - if (mode == AR5K_EEPROM_MODE_11G) - ee->ee_cck_ofdm_power_delta = (val >> 3) & 0xff; - } - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0 && - mode == AR5K_EEPROM_MODE_11A) { - ee->ee_i_cal[mode] = (val >> 8) & 0x3f; - ee->ee_q_cal[mode] = (val >> 3) & 0x1f; - } - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_6 && - mode == AR5K_EEPROM_MODE_11G) - ee->ee_scaled_cck_delta = (val >> 11) & 0x1f; - - /* return new offset */ - *offset = o; - - return 0; -} - -/* - * Initialize eeprom & capabilities structs - */ -static int ath5k_eeprom_init(struct ath5k_hw *ah) -{ - struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; - unsigned int mode, i; - int ret; - u32 offset; - u16 val; - - /* Initial TX thermal adjustment values */ - ee->ee_tx_clip = 4; - ee->ee_pwd_84 = ee->ee_pwd_90 = 1; - ee->ee_gain_select = 1; - - /* - * Read values from EEPROM and store them in the capability structure - */ - AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MAGIC, ee_magic); - AR5K_EEPROM_READ_HDR(AR5K_EEPROM_PROTECT, ee_protect); - AR5K_EEPROM_READ_HDR(AR5K_EEPROM_REG_DOMAIN, ee_regdomain); - AR5K_EEPROM_READ_HDR(AR5K_EEPROM_VERSION, ee_version); - AR5K_EEPROM_READ_HDR(AR5K_EEPROM_HDR, ee_header); - - /* Return if we have an old EEPROM */ - if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_0) - return 0; - -#ifdef notyet - /* - * Validate the checksum of the EEPROM date. There are some - * devices with invalid EEPROMs. - */ - for (cksum = 0, offset = 0; offset < AR5K_EEPROM_INFO_MAX; offset++) { - AR5K_EEPROM_READ(AR5K_EEPROM_INFO(offset), val); - cksum ^= val; - } - if (cksum != AR5K_EEPROM_INFO_CKSUM) { - ATH5K_ERR(ah->ah_sc, "Invalid EEPROM checksum 0x%04x\n", cksum); - return -EIO; - } -#endif - - AR5K_EEPROM_READ_HDR(AR5K_EEPROM_ANT_GAIN(ah->ah_ee_version), - ee_ant_gain); - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) { - AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC0, ee_misc0); - AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC1, ee_misc1); - } - - if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_3) { - AR5K_EEPROM_READ(AR5K_EEPROM_OBDB0_2GHZ, val); - ee->ee_ob[AR5K_EEPROM_MODE_11B][0] = val & 0x7; - ee->ee_db[AR5K_EEPROM_MODE_11B][0] = (val >> 3) & 0x7; - - AR5K_EEPROM_READ(AR5K_EEPROM_OBDB1_2GHZ, val); - ee->ee_ob[AR5K_EEPROM_MODE_11G][0] = val & 0x7; - ee->ee_db[AR5K_EEPROM_MODE_11G][0] = (val >> 3) & 0x7; - } - - /* - * Get conformance test limit values - */ - offset = AR5K_EEPROM_CTL(ah->ah_ee_version); - ee->ee_ctls = AR5K_EEPROM_N_CTLS(ah->ah_ee_version); - - for (i = 0; i < ee->ee_ctls; i++) { - AR5K_EEPROM_READ(offset++, val); - ee->ee_ctl[i] = (val >> 8) & 0xff; - ee->ee_ctl[i + 1] = val & 0xff; - } - - /* - * Get values for 802.11a (5GHz) - */ - mode = AR5K_EEPROM_MODE_11A; - - ee->ee_turbo_max_power[mode] = - AR5K_EEPROM_HDR_T_5GHZ_DBM(ee->ee_header); - - offset = AR5K_EEPROM_MODES_11A(ah->ah_ee_version); - - ret = ath5k_eeprom_read_ants(ah, &offset, mode); - if (ret) - return ret; - - AR5K_EEPROM_READ(offset++, val); - ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff); - ee->ee_ob[mode][3] = (val >> 5) & 0x7; - ee->ee_db[mode][3] = (val >> 2) & 0x7; - ee->ee_ob[mode][2] = (val << 1) & 0x7; - - AR5K_EEPROM_READ(offset++, val); - ee->ee_ob[mode][2] |= (val >> 15) & 0x1; - ee->ee_db[mode][2] = (val >> 12) & 0x7; - ee->ee_ob[mode][1] = (val >> 9) & 0x7; - ee->ee_db[mode][1] = (val >> 6) & 0x7; - ee->ee_ob[mode][0] = (val >> 3) & 0x7; - ee->ee_db[mode][0] = val & 0x7; - - ret = ath5k_eeprom_read_modes(ah, &offset, mode); - if (ret) - return ret; - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) { - AR5K_EEPROM_READ(offset++, val); - ee->ee_margin_tx_rx[mode] = val & 0x3f; - } - - /* - * Get values for 802.11b (2.4GHz) - */ - mode = AR5K_EEPROM_MODE_11B; - offset = AR5K_EEPROM_MODES_11B(ah->ah_ee_version); - - ret = ath5k_eeprom_read_ants(ah, &offset, mode); - if (ret) - return ret; - - AR5K_EEPROM_READ(offset++, val); - ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff); - ee->ee_ob[mode][1] = (val >> 4) & 0x7; - ee->ee_db[mode][1] = val & 0x7; - - ret = ath5k_eeprom_read_modes(ah, &offset, mode); - if (ret) - return ret; - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) { - AR5K_EEPROM_READ(offset++, val); - ee->ee_cal_pier[mode][0] = - ath5k_eeprom_bin2freq(ah, val & 0xff, mode); - ee->ee_cal_pier[mode][1] = - ath5k_eeprom_bin2freq(ah, (val >> 8) & 0xff, mode); - - AR5K_EEPROM_READ(offset++, val); - ee->ee_cal_pier[mode][2] = - ath5k_eeprom_bin2freq(ah, val & 0xff, mode); - } - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) - ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f; - - /* - * Get values for 802.11g (2.4GHz) - */ - mode = AR5K_EEPROM_MODE_11G; - offset = AR5K_EEPROM_MODES_11G(ah->ah_ee_version); - - ret = ath5k_eeprom_read_ants(ah, &offset, mode); - if (ret) - return ret; - - AR5K_EEPROM_READ(offset++, val); - ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff); - ee->ee_ob[mode][1] = (val >> 4) & 0x7; - ee->ee_db[mode][1] = val & 0x7; - - ret = ath5k_eeprom_read_modes(ah, &offset, mode); - if (ret) - return ret; - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) { - AR5K_EEPROM_READ(offset++, val); - ee->ee_cal_pier[mode][0] = - ath5k_eeprom_bin2freq(ah, val & 0xff, mode); - ee->ee_cal_pier[mode][1] = - ath5k_eeprom_bin2freq(ah, (val >> 8) & 0xff, mode); - - AR5K_EEPROM_READ(offset++, val); - ee->ee_turbo_max_power[mode] = val & 0x7f; - ee->ee_xr_power[mode] = (val >> 7) & 0x3f; - - AR5K_EEPROM_READ(offset++, val); - ee->ee_cal_pier[mode][2] = - ath5k_eeprom_bin2freq(ah, val & 0xff, mode); - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) - ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f; - - AR5K_EEPROM_READ(offset++, val); - ee->ee_i_cal[mode] = (val >> 8) & 0x3f; - ee->ee_q_cal[mode] = (val >> 3) & 0x1f; - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_2) { - AR5K_EEPROM_READ(offset++, val); - ee->ee_cck_ofdm_gain_delta = val & 0xff; - } - } - - /* - * Read 5GHz EEPROM channels - */ - - return 0; -} - -/* - * Read the MAC address from eeprom - */ -static int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac) -{ - u8 mac_d[ETH_ALEN]; - u32 total, offset; - u16 data; - int octet, ret; - - memset(mac, 0, ETH_ALEN); - memset(mac_d, 0, ETH_ALEN); - - ret = ath5k_hw_eeprom_read(ah, 0x20, &data); - if (ret) - return ret; - - for (offset = 0x1f, octet = 0, total = 0; offset >= 0x1d; offset--) { - ret = ath5k_hw_eeprom_read(ah, offset, &data); - if (ret) - return ret; - - total += data; - mac_d[octet + 1] = data & 0xff; - mac_d[octet] = data >> 8; - octet += 2; - } - - memcpy(mac, mac_d, ETH_ALEN); - - if (!total || total == 3 * 0xffff) - return -EINVAL; - - return 0; -} - -/* - * Fill the capabilities struct - */ -static int ath5k_hw_get_capabilities(struct ath5k_hw *ah) -{ - u16 ee_header; - - ATH5K_TRACE(ah->ah_sc); - /* Capabilities stored in the EEPROM */ - ee_header = ah->ah_capabilities.cap_eeprom.ee_header; - - if (ah->ah_version == AR5K_AR5210) { - /* - * Set radio capabilities - * (The AR5110 only supports the middle 5GHz band) - */ - ah->ah_capabilities.cap_range.range_5ghz_min = 5120; - ah->ah_capabilities.cap_range.range_5ghz_max = 5430; - ah->ah_capabilities.cap_range.range_2ghz_min = 0; - ah->ah_capabilities.cap_range.range_2ghz_max = 0; - - /* Set supported modes */ - __set_bit(AR5K_MODE_11A, ah->ah_capabilities.cap_mode); - __set_bit(AR5K_MODE_11A_TURBO, ah->ah_capabilities.cap_mode); - } else { - /* - * XXX The tranceiver supports frequencies from 4920 to 6100GHz - * XXX and from 2312 to 2732GHz. There are problems with the - * XXX current ieee80211 implementation because the IEEE - * XXX channel mapping does not support negative channel - * XXX numbers (2312MHz is channel -19). Of course, this - * XXX doesn't matter because these channels are out of range - * XXX but some regulation domains like MKK (Japan) will - * XXX support frequencies somewhere around 4.8GHz. - */ - - /* - * Set radio capabilities - */ - - if (AR5K_EEPROM_HDR_11A(ee_header)) { - ah->ah_capabilities.cap_range.range_5ghz_min = 5005; /* 4920 */ - ah->ah_capabilities.cap_range.range_5ghz_max = 6100; - - /* Set supported modes */ - __set_bit(AR5K_MODE_11A, - ah->ah_capabilities.cap_mode); - __set_bit(AR5K_MODE_11A_TURBO, - ah->ah_capabilities.cap_mode); - if (ah->ah_version == AR5K_AR5212) - __set_bit(AR5K_MODE_11G_TURBO, - ah->ah_capabilities.cap_mode); - } - - /* Enable 802.11b if a 2GHz capable radio (2111/5112) is - * connected */ - if (AR5K_EEPROM_HDR_11B(ee_header) || - AR5K_EEPROM_HDR_11G(ee_header)) { - ah->ah_capabilities.cap_range.range_2ghz_min = 2412; /* 2312 */ - ah->ah_capabilities.cap_range.range_2ghz_max = 2732; - - if (AR5K_EEPROM_HDR_11B(ee_header)) - __set_bit(AR5K_MODE_11B, - ah->ah_capabilities.cap_mode); - - if (AR5K_EEPROM_HDR_11G(ee_header)) - __set_bit(AR5K_MODE_11G, - ah->ah_capabilities.cap_mode); - } - } - - /* GPIO */ - ah->ah_gpio_npins = AR5K_NUM_GPIO; - - /* Set number of supported TX queues */ - if (ah->ah_version == AR5K_AR5210) - ah->ah_capabilities.cap_queues.q_tx_num = - AR5K_NUM_TX_QUEUES_NOQCU; - else - ah->ah_capabilities.cap_queues.q_tx_num = AR5K_NUM_TX_QUEUES; - - return 0; -} - -/*********************************\ - Protocol Control Unit Functions -\*********************************/ - -/* - * Set Operation mode - */ -int ath5k_hw_set_opmode(struct ath5k_hw *ah) -{ - u32 pcu_reg, beacon_reg, low_id, high_id; - - pcu_reg = 0; - beacon_reg = 0; - - ATH5K_TRACE(ah->ah_sc); - - switch (ah->ah_op_mode) { - case IEEE80211_IF_TYPE_IBSS: - pcu_reg |= AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_DESC_ANTENNA | - (ah->ah_version == AR5K_AR5210 ? - AR5K_STA_ID1_NO_PSPOLL : 0); - beacon_reg |= AR5K_BCR_ADHOC; - break; - - case IEEE80211_IF_TYPE_AP: - case IEEE80211_IF_TYPE_MESH_POINT: - pcu_reg |= AR5K_STA_ID1_AP | AR5K_STA_ID1_RTS_DEF_ANTENNA | - (ah->ah_version == AR5K_AR5210 ? - AR5K_STA_ID1_NO_PSPOLL : 0); - beacon_reg |= AR5K_BCR_AP; - break; - - case IEEE80211_IF_TYPE_STA: - pcu_reg |= AR5K_STA_ID1_DEFAULT_ANTENNA | - (ah->ah_version == AR5K_AR5210 ? - AR5K_STA_ID1_PWR_SV : 0); - case IEEE80211_IF_TYPE_MNTR: - pcu_reg |= AR5K_STA_ID1_DEFAULT_ANTENNA | - (ah->ah_version == AR5K_AR5210 ? - AR5K_STA_ID1_NO_PSPOLL : 0); - break; - - default: - return -EINVAL; - } - - /* - * Set PCU registers - */ - low_id = AR5K_LOW_ID(ah->ah_sta_id); - high_id = AR5K_HIGH_ID(ah->ah_sta_id); - ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0); - ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1); - - /* - * Set Beacon Control Register on 5210 - */ - if (ah->ah_version == AR5K_AR5210) - ath5k_hw_reg_write(ah, beacon_reg, AR5K_BCR); - - return 0; -} - -/* - * BSSID Functions - */ - -/* - * Get station id - */ -void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac) -{ - ATH5K_TRACE(ah->ah_sc); - memcpy(mac, ah->ah_sta_id, ETH_ALEN); -} - -/* - * Set station id - */ -int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac) -{ - u32 low_id, high_id; - - ATH5K_TRACE(ah->ah_sc); - /* Set new station ID */ - memcpy(ah->ah_sta_id, mac, ETH_ALEN); - - low_id = AR5K_LOW_ID(mac); - high_id = AR5K_HIGH_ID(mac); - - ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0); - ath5k_hw_reg_write(ah, high_id, AR5K_STA_ID1); - - return 0; -} - -/* - * Set BSSID - */ -void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id) -{ - u32 low_id, high_id; - u16 tim_offset = 0; - - /* - * Set simple BSSID mask on 5212 - */ - if (ah->ah_version == AR5K_AR5212) { - ath5k_hw_reg_write(ah, 0xffffffff, AR5K_BSS_IDM0); - ath5k_hw_reg_write(ah, 0xffffffff, AR5K_BSS_IDM1); - } - - /* - * Set BSSID which triggers the "SME Join" operation - */ - low_id = AR5K_LOW_ID(bssid); - high_id = AR5K_HIGH_ID(bssid); - ath5k_hw_reg_write(ah, low_id, AR5K_BSS_ID0); - ath5k_hw_reg_write(ah, high_id | ((assoc_id & 0x3fff) << - AR5K_BSS_ID1_AID_S), AR5K_BSS_ID1); - - if (assoc_id == 0) { - ath5k_hw_disable_pspoll(ah); - return; - } - - AR5K_REG_WRITE_BITS(ah, AR5K_BEACON, AR5K_BEACON_TIM, - tim_offset ? tim_offset + 4 : 0); - - ath5k_hw_enable_pspoll(ah, NULL, 0); -} -/** - * ath5k_hw_set_bssid_mask - set common bits we should listen to - * - * The bssid_mask is a utility used by AR5212 hardware to inform the hardware - * which bits of the interface's MAC address should be looked at when trying - * to decide which packets to ACK. In station mode every bit matters. In AP - * mode with a single BSS every bit matters as well. In AP mode with - * multiple BSSes not every bit matters. - * - * @ah: the &struct ath5k_hw - * @mask: the bssid_mask, a u8 array of size ETH_ALEN - * - * Note that this is a simple filter and *does* not filter out all - * relevant frames. Some non-relevant frames will get through, probability - * jocks are welcomed to compute. - * - * When handling multiple BSSes (or VAPs) you can get the BSSID mask by - * computing the set of: - * - * ~ ( MAC XOR BSSID ) - * - * When you do this you are essentially computing the common bits. Later it - * is assumed the harware will "and" (&) the BSSID mask with the MAC address - * to obtain the relevant bits which should match on the destination frame. - * - * Simple example: on your card you have have two BSSes you have created with - * BSSID-01 and BSSID-02. Lets assume BSSID-01 will not use the MAC address. - * There is another BSSID-03 but you are not part of it. For simplicity's sake, - * assuming only 4 bits for a mac address and for BSSIDs you can then have: - * - * \ - * MAC: 0001 | - * BSSID-01: 0100 | --> Belongs to us - * BSSID-02: 1001 | - * / - * ------------------- - * BSSID-03: 0110 | --> External - * ------------------- - * - * Our bssid_mask would then be: - * - * On loop iteration for BSSID-01: - * ~(0001 ^ 0100) -> ~(0101) - * -> 1010 - * bssid_mask = 1010 - * - * On loop iteration for BSSID-02: - * bssid_mask &= ~(0001 ^ 1001) - * bssid_mask = (1010) & ~(0001 ^ 1001) - * bssid_mask = (1010) & ~(1001) - * bssid_mask = (1010) & (0110) - * bssid_mask = 0010 - * - * A bssid_mask of 0010 means "only pay attention to the second least - * significant bit". This is because its the only bit common - * amongst the MAC and all BSSIDs we support. To findout what the real - * common bit is we can simply "&" the bssid_mask now with any BSSID we have - * or our MAC address (we assume the hardware uses the MAC address). - * - * Now, suppose there's an incoming frame for BSSID-03: - * - * IFRAME-01: 0110 - * - * An easy eye-inspeciton of this already should tell you that this frame - * will not pass our check. This is beacuse the bssid_mask tells the - * hardware to only look at the second least significant bit and the - * common bit amongst the MAC and BSSIDs is 0, this frame has the 2nd LSB - * as 1, which does not match 0. - * - * So with IFRAME-01 we *assume* the hardware will do: - * - * allow = (IFRAME-01 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0; - * --> allow = (0110 & 0010) == (0010 & 0001) ? 1 : 0; - * --> allow = (0010) == 0000 ? 1 : 0; - * --> allow = 0 - * - * Lets now test a frame that should work: - * - * IFRAME-02: 0001 (we should allow) - * - * allow = (0001 & 1010) == 1010 - * - * allow = (IFRAME-02 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0; - * --> allow = (0001 & 0010) == (0010 & 0001) ? 1 :0; - * --> allow = (0010) == (0010) - * --> allow = 1 - * - * Other examples: - * - * IFRAME-03: 0100 --> allowed - * IFRAME-04: 1001 --> allowed - * IFRAME-05: 1101 --> allowed but its not for us!!! - * - */ -int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask) -{ - u32 low_id, high_id; - ATH5K_TRACE(ah->ah_sc); - - if (ah->ah_version == AR5K_AR5212) { - low_id = AR5K_LOW_ID(mask); - high_id = AR5K_HIGH_ID(mask); - - ath5k_hw_reg_write(ah, low_id, AR5K_BSS_IDM0); - ath5k_hw_reg_write(ah, high_id, AR5K_BSS_IDM1); - - return 0; - } - - return -EIO; -} - -/* - * Receive start/stop functions - */ - -/* - * Start receive on PCU - */ -void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX); - - /* TODO: ANI Support */ -} - -/* - * Stop receive on PCU - */ -void ath5k_hw_stop_pcu_recv(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX); - - /* TODO: ANI Support */ -} - -/* - * RX Filter functions - */ - -/* - * Set multicast filter - */ -void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1) -{ - ATH5K_TRACE(ah->ah_sc); - /* Set the multicat filter */ - ath5k_hw_reg_write(ah, filter0, AR5K_MCAST_FILTER0); - ath5k_hw_reg_write(ah, filter1, AR5K_MCAST_FILTER1); -} - -/* - * Set multicast filter by index - */ -int ath5k_hw_set_mcast_filterindex(struct ath5k_hw *ah, u32 index) -{ - - ATH5K_TRACE(ah->ah_sc); - if (index >= 64) - return -EINVAL; - else if (index >= 32) - AR5K_REG_ENABLE_BITS(ah, AR5K_MCAST_FILTER1, - (1 << (index - 32))); - else - AR5K_REG_ENABLE_BITS(ah, AR5K_MCAST_FILTER0, (1 << index)); - - return 0; -} - -/* - * Clear Multicast filter by index - */ -int ath5k_hw_clear_mcast_filter_idx(struct ath5k_hw *ah, u32 index) -{ - - ATH5K_TRACE(ah->ah_sc); - if (index >= 64) - return -EINVAL; - else if (index >= 32) - AR5K_REG_DISABLE_BITS(ah, AR5K_MCAST_FILTER1, - (1 << (index - 32))); - else - AR5K_REG_DISABLE_BITS(ah, AR5K_MCAST_FILTER0, (1 << index)); - - return 0; -} - -/* - * Get current rx filter - */ -u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah) -{ - u32 data, filter = 0; - - ATH5K_TRACE(ah->ah_sc); - filter = ath5k_hw_reg_read(ah, AR5K_RX_FILTER); - - /*Radar detection for 5212*/ - if (ah->ah_version == AR5K_AR5212) { - data = ath5k_hw_reg_read(ah, AR5K_PHY_ERR_FIL); - - if (data & AR5K_PHY_ERR_FIL_RADAR) - filter |= AR5K_RX_FILTER_RADARERR; - if (data & (AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK)) - filter |= AR5K_RX_FILTER_PHYERR; - } - - return filter; -} - -/* - * Set rx filter - */ -void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter) -{ - u32 data = 0; - - ATH5K_TRACE(ah->ah_sc); - - /* Set PHY error filter register on 5212*/ - if (ah->ah_version == AR5K_AR5212) { - if (filter & AR5K_RX_FILTER_RADARERR) - data |= AR5K_PHY_ERR_FIL_RADAR; - if (filter & AR5K_RX_FILTER_PHYERR) - data |= AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK; - } - - /* - * The AR5210 uses promiscous mode to detect radar activity - */ - if (ah->ah_version == AR5K_AR5210 && - (filter & AR5K_RX_FILTER_RADARERR)) { - filter &= ~AR5K_RX_FILTER_RADARERR; - filter |= AR5K_RX_FILTER_PROM; - } - - /*Zero length DMA*/ - if (data) - AR5K_REG_ENABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA); - else - AR5K_REG_DISABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA); - - /*Write RX Filter register*/ - ath5k_hw_reg_write(ah, filter & 0xff, AR5K_RX_FILTER); - - /*Write PHY error filter register on 5212*/ - if (ah->ah_version == AR5K_AR5212) - ath5k_hw_reg_write(ah, data, AR5K_PHY_ERR_FIL); - -} - -/* - * Beacon related functions - */ - -/* - * Get a 32bit TSF - */ -u32 ath5k_hw_get_tsf32(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - return ath5k_hw_reg_read(ah, AR5K_TSF_L32); -} - -/* - * Get the full 64bit TSF - */ -u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah) -{ - u64 tsf = ath5k_hw_reg_read(ah, AR5K_TSF_U32); - ATH5K_TRACE(ah->ah_sc); - - return ath5k_hw_reg_read(ah, AR5K_TSF_L32) | (tsf << 32); -} - -/* - * Force a TSF reset - */ -void ath5k_hw_reset_tsf(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - AR5K_REG_ENABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_RESET_TSF); -} - -/* - * Initialize beacon timers - */ -void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval) -{ - u32 timer1, timer2, timer3; - - ATH5K_TRACE(ah->ah_sc); - /* - * Set the additional timers by mode - */ - switch (ah->ah_op_mode) { - case IEEE80211_IF_TYPE_STA: - if (ah->ah_version == AR5K_AR5210) { - timer1 = 0xffffffff; - timer2 = 0xffffffff; - } else { - timer1 = 0x0000ffff; - timer2 = 0x0007ffff; - } - break; - - default: - timer1 = (next_beacon - AR5K_TUNE_DMA_BEACON_RESP) << 3; - timer2 = (next_beacon - AR5K_TUNE_SW_BEACON_RESP) << 3; - } - - timer3 = next_beacon + (ah->ah_atim_window ? ah->ah_atim_window : 1); - - /* - * Set the beacon register and enable all timers. - * (next beacon, DMA beacon, software beacon, ATIM window time) - */ - ath5k_hw_reg_write(ah, next_beacon, AR5K_TIMER0); - ath5k_hw_reg_write(ah, timer1, AR5K_TIMER1); - ath5k_hw_reg_write(ah, timer2, AR5K_TIMER2); - ath5k_hw_reg_write(ah, timer3, AR5K_TIMER3); - - ath5k_hw_reg_write(ah, interval & (AR5K_BEACON_PERIOD | - AR5K_BEACON_RESET_TSF | AR5K_BEACON_ENABLE), - AR5K_BEACON); -} - -#if 0 -/* - * Set beacon timers - */ -int ath5k_hw_set_beacon_timers(struct ath5k_hw *ah, - const struct ath5k_beacon_state *state) -{ - u32 cfp_period, next_cfp, dtim, interval, next_beacon; - - /* - * TODO: should be changed through *state - * review struct ath5k_beacon_state struct - * - * XXX: These are used for cfp period bellow, are they - * ok ? Is it O.K. for tsf here to be 0 or should we use - * get_tsf ? - */ - u32 dtim_count = 0; /* XXX */ - u32 cfp_count = 0; /* XXX */ - u32 tsf = 0; /* XXX */ - - ATH5K_TRACE(ah->ah_sc); - /* Return on an invalid beacon state */ - if (state->bs_interval < 1) - return -EINVAL; - - interval = state->bs_interval; - dtim = state->bs_dtim_period; - - /* - * PCF support? - */ - if (state->bs_cfp_period > 0) { - /* - * Enable PCF mode and set the CFP - * (Contention Free Period) and timer registers - */ - cfp_period = state->bs_cfp_period * state->bs_dtim_period * - state->bs_interval; - next_cfp = (cfp_count * state->bs_dtim_period + dtim_count) * - state->bs_interval; - - AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, - AR5K_STA_ID1_DEFAULT_ANTENNA | - AR5K_STA_ID1_PCF); - ath5k_hw_reg_write(ah, cfp_period, AR5K_CFP_PERIOD); - ath5k_hw_reg_write(ah, state->bs_cfp_max_duration, - AR5K_CFP_DUR); - ath5k_hw_reg_write(ah, (tsf + (next_cfp == 0 ? cfp_period : - next_cfp)) << 3, AR5K_TIMER2); - } else { - /* Disable PCF mode */ - AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, - AR5K_STA_ID1_DEFAULT_ANTENNA | - AR5K_STA_ID1_PCF); - } - - /* - * Enable the beacon timer register - */ - ath5k_hw_reg_write(ah, state->bs_next_beacon, AR5K_TIMER0); - - /* - * Start the beacon timers - */ - ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, AR5K_BEACON) &~ - (AR5K_BEACON_PERIOD | AR5K_BEACON_TIM)) | - AR5K_REG_SM(state->bs_tim_offset ? state->bs_tim_offset + 4 : 0, - AR5K_BEACON_TIM) | AR5K_REG_SM(state->bs_interval, - AR5K_BEACON_PERIOD), AR5K_BEACON); - - /* - * Write new beacon miss threshold, if it appears to be valid - * XXX: Figure out right values for min <= bs_bmiss_threshold <= max - * and return if its not in range. We can test this by reading value and - * setting value to a largest value and seeing which values register. - */ - - AR5K_REG_WRITE_BITS(ah, AR5K_RSSI_THR, AR5K_RSSI_THR_BMISS, - state->bs_bmiss_threshold); - - /* - * Set sleep control register - * XXX: Didn't find this in 5210 code but since this register - * exists also in ar5k's 5210 headers i leave it as common code. - */ - AR5K_REG_WRITE_BITS(ah, AR5K_SLEEP_CTL, AR5K_SLEEP_CTL_SLDUR, - (state->bs_sleep_duration - 3) << 3); - - /* - * Set enhanced sleep registers on 5212 - */ - if (ah->ah_version == AR5K_AR5212) { - if (state->bs_sleep_duration > state->bs_interval && - roundup(state->bs_sleep_duration, interval) == - state->bs_sleep_duration) - interval = state->bs_sleep_duration; - - if (state->bs_sleep_duration > dtim && (dtim == 0 || - roundup(state->bs_sleep_duration, dtim) == - state->bs_sleep_duration)) - dtim = state->bs_sleep_duration; - - if (interval > dtim) - return -EINVAL; - - next_beacon = interval == dtim ? state->bs_next_dtim : - state->bs_next_beacon; - - ath5k_hw_reg_write(ah, - AR5K_REG_SM((state->bs_next_dtim - 3) << 3, - AR5K_SLEEP0_NEXT_DTIM) | - AR5K_REG_SM(10, AR5K_SLEEP0_CABTO) | - AR5K_SLEEP0_ENH_SLEEP_EN | - AR5K_SLEEP0_ASSUME_DTIM, AR5K_SLEEP0); - - ath5k_hw_reg_write(ah, AR5K_REG_SM((next_beacon - 3) << 3, - AR5K_SLEEP1_NEXT_TIM) | - AR5K_REG_SM(10, AR5K_SLEEP1_BEACON_TO), AR5K_SLEEP1); - - ath5k_hw_reg_write(ah, - AR5K_REG_SM(interval, AR5K_SLEEP2_TIM_PER) | - AR5K_REG_SM(dtim, AR5K_SLEEP2_DTIM_PER), AR5K_SLEEP2); - } - - return 0; -} - -/* - * Reset beacon timers - */ -void ath5k_hw_reset_beacon(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - /* - * Disable beacon timer - */ - ath5k_hw_reg_write(ah, 0, AR5K_TIMER0); - - /* - * Disable some beacon register values - */ - AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, - AR5K_STA_ID1_DEFAULT_ANTENNA | AR5K_STA_ID1_PCF); - ath5k_hw_reg_write(ah, AR5K_BEACON_PERIOD, AR5K_BEACON); -} - -/* - * Wait for beacon queue to finish - */ -int ath5k_hw_beaconq_finish(struct ath5k_hw *ah, unsigned long phys_addr) -{ - unsigned int i; - int ret; - - ATH5K_TRACE(ah->ah_sc); - - /* 5210 doesn't have QCU*/ - if (ah->ah_version == AR5K_AR5210) { - /* - * Wait for beaconn queue to finish by checking - * Control Register and Beacon Status Register. - */ - for (i = AR5K_TUNE_BEACON_INTERVAL / 2; i > 0; i--) { - if (!(ath5k_hw_reg_read(ah, AR5K_BSR) & AR5K_BSR_TXQ1F) - || - !(ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_BSR_TXQ1F)) - break; - udelay(10); - } - - /* Timeout... */ - if (i <= 0) { - /* - * Re-schedule the beacon queue - */ - ath5k_hw_reg_write(ah, phys_addr, AR5K_NOQCU_TXDP1); - ath5k_hw_reg_write(ah, AR5K_BCR_TQ1V | AR5K_BCR_BDMAE, - AR5K_BCR); - - return -EIO; - } - ret = 0; - } else { - /*5211/5212*/ - ret = ath5k_hw_register_timeout(ah, - AR5K_QUEUE_STATUS(AR5K_TX_QUEUE_ID_BEACON), - AR5K_QCU_STS_FRMPENDCNT, 0, false); - - if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, AR5K_TX_QUEUE_ID_BEACON)) - return -EIO; - } - - return ret; -} -#endif - -/* - * Update mib counters (statistics) - */ -void ath5k_hw_update_mib_counters(struct ath5k_hw *ah, - struct ieee80211_low_level_stats *stats) -{ - ATH5K_TRACE(ah->ah_sc); - - /* Read-And-Clear */ - stats->dot11ACKFailureCount += ath5k_hw_reg_read(ah, AR5K_ACK_FAIL); - stats->dot11RTSFailureCount += ath5k_hw_reg_read(ah, AR5K_RTS_FAIL); - stats->dot11RTSSuccessCount += ath5k_hw_reg_read(ah, AR5K_RTS_OK); - stats->dot11FCSErrorCount += ath5k_hw_reg_read(ah, AR5K_FCS_FAIL); - - /* XXX: Should we use this to track beacon count ? - * -we read it anyway to clear the register */ - ath5k_hw_reg_read(ah, AR5K_BEACON_CNT); - - /* Reset profile count registers on 5212*/ - if (ah->ah_version == AR5K_AR5212) { - ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_TX); - ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RX); - ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RXCLR); - ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_CYCLE); - } -} - -/** ath5k_hw_set_ack_bitrate - set bitrate for ACKs - * - * @ah: the &struct ath5k_hw - * @high: determines if to use low bit rate or now - */ -void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high) -{ - if (ah->ah_version != AR5K_AR5212) - return; - else { - u32 val = AR5K_STA_ID1_BASE_RATE_11B | AR5K_STA_ID1_ACKCTS_6MB; - if (high) - AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, val); - else - AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, val); - } -} - - -/* - * ACK/CTS Timeouts - */ - -/* - * Set ACK timeout on PCU - */ -int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout) -{ - ATH5K_TRACE(ah->ah_sc); - if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_ACK), - ah->ah_turbo) <= timeout) - return -EINVAL; - - AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_ACK, - ath5k_hw_htoclock(timeout, ah->ah_turbo)); - - return 0; -} - -/* - * Read the ACK timeout from PCU - */ -unsigned int ath5k_hw_get_ack_timeout(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - - return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah, - AR5K_TIME_OUT), AR5K_TIME_OUT_ACK), ah->ah_turbo); -} - -/* - * Set CTS timeout on PCU - */ -int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout) -{ - ATH5K_TRACE(ah->ah_sc); - if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_CTS), - ah->ah_turbo) <= timeout) - return -EINVAL; - - AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_CTS, - ath5k_hw_htoclock(timeout, ah->ah_turbo)); - - return 0; -} - -/* - * Read CTS timeout from PCU - */ -unsigned int ath5k_hw_get_cts_timeout(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah, - AR5K_TIME_OUT), AR5K_TIME_OUT_CTS), ah->ah_turbo); -} - -/* - * Key table (WEP) functions - */ - -int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry) -{ - unsigned int i; - - ATH5K_TRACE(ah->ah_sc); - AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE); - - for (i = 0; i < AR5K_KEYCACHE_SIZE; i++) - ath5k_hw_reg_write(ah, 0, AR5K_KEYTABLE_OFF(entry, i)); - - /* - * Set NULL encryption on AR5212+ - * - * Note: AR5K_KEYTABLE_TYPE -> AR5K_KEYTABLE_OFF(entry, 5) - * AR5K_KEYTABLE_TYPE_NULL -> 0x00000007 - * - * Note2: Windows driver (ndiswrapper) sets this to - * 0x00000714 instead of 0x00000007 - */ - if (ah->ah_version > AR5K_AR5211) - ath5k_hw_reg_write(ah, AR5K_KEYTABLE_TYPE_NULL, - AR5K_KEYTABLE_TYPE(entry)); - - return 0; -} - -int ath5k_hw_is_key_valid(struct ath5k_hw *ah, u16 entry) -{ - ATH5K_TRACE(ah->ah_sc); - AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE); - - /* Check the validation flag at the end of the entry */ - return ath5k_hw_reg_read(ah, AR5K_KEYTABLE_MAC1(entry)) & - AR5K_KEYTABLE_VALID; -} - -int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry, - const struct ieee80211_key_conf *key, const u8 *mac) -{ - unsigned int i; - __le32 key_v[5] = {}; - u32 keytype; - - ATH5K_TRACE(ah->ah_sc); - - /* key->keylen comes in from mac80211 in bytes */ - - if (key->keylen > AR5K_KEYTABLE_SIZE / 8) - return -EOPNOTSUPP; - - switch (key->keylen) { - /* WEP 40-bit = 40-bit entered key + 24 bit IV = 64-bit */ - case 40 / 8: - memcpy(&key_v[0], key->key, 5); - keytype = AR5K_KEYTABLE_TYPE_40; - break; - - /* WEP 104-bit = 104-bit entered key + 24-bit IV = 128-bit */ - case 104 / 8: - memcpy(&key_v[0], &key->key[0], 6); - memcpy(&key_v[2], &key->key[6], 6); - memcpy(&key_v[4], &key->key[12], 1); - keytype = AR5K_KEYTABLE_TYPE_104; - break; - /* WEP 128-bit = 128-bit entered key + 24 bit IV = 152-bit */ - case 128 / 8: - memcpy(&key_v[0], &key->key[0], 6); - memcpy(&key_v[2], &key->key[6], 6); - memcpy(&key_v[4], &key->key[12], 4); - keytype = AR5K_KEYTABLE_TYPE_128; - break; - - default: - return -EINVAL; /* shouldn't happen */ - } - - for (i = 0; i < ARRAY_SIZE(key_v); i++) - ath5k_hw_reg_write(ah, le32_to_cpu(key_v[i]), - AR5K_KEYTABLE_OFF(entry, i)); - - ath5k_hw_reg_write(ah, keytype, AR5K_KEYTABLE_TYPE(entry)); - - return ath5k_hw_set_key_lladdr(ah, entry, mac); -} - -int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac) -{ - u32 low_id, high_id; - - ATH5K_TRACE(ah->ah_sc); - /* Invalid entry (key table overflow) */ - AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE); - - /* MAC may be NULL if it's a broadcast key. In this case no need to - * to compute AR5K_LOW_ID and AR5K_HIGH_ID as we already know it. */ - if (unlikely(mac == NULL)) { - low_id = 0xffffffff; - high_id = 0xffff | AR5K_KEYTABLE_VALID; - } else { - low_id = AR5K_LOW_ID(mac); - high_id = AR5K_HIGH_ID(mac) | AR5K_KEYTABLE_VALID; - } - - ath5k_hw_reg_write(ah, low_id, AR5K_KEYTABLE_MAC0(entry)); - ath5k_hw_reg_write(ah, high_id, AR5K_KEYTABLE_MAC1(entry)); - - return 0; -} - - -/********************************************\ -Queue Control Unit, DFS Control Unit Functions -\********************************************/ - -/* - * Initialize a transmit queue - */ -int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type, - struct ath5k_txq_info *queue_info) -{ - unsigned int queue; - int ret; - - ATH5K_TRACE(ah->ah_sc); - - /* - * Get queue by type - */ - /*5210 only has 2 queues*/ - if (ah->ah_version == AR5K_AR5210) { - switch (queue_type) { - case AR5K_TX_QUEUE_DATA: - queue = AR5K_TX_QUEUE_ID_NOQCU_DATA; - break; - case AR5K_TX_QUEUE_BEACON: - case AR5K_TX_QUEUE_CAB: - queue = AR5K_TX_QUEUE_ID_NOQCU_BEACON; - break; - default: - return -EINVAL; - } - } else { - switch (queue_type) { - case AR5K_TX_QUEUE_DATA: - for (queue = AR5K_TX_QUEUE_ID_DATA_MIN; - ah->ah_txq[queue].tqi_type != - AR5K_TX_QUEUE_INACTIVE; queue++) { - - if (queue > AR5K_TX_QUEUE_ID_DATA_MAX) - return -EINVAL; - } - break; - case AR5K_TX_QUEUE_UAPSD: - queue = AR5K_TX_QUEUE_ID_UAPSD; - break; - case AR5K_TX_QUEUE_BEACON: - queue = AR5K_TX_QUEUE_ID_BEACON; - break; - case AR5K_TX_QUEUE_CAB: - queue = AR5K_TX_QUEUE_ID_CAB; - break; - case AR5K_TX_QUEUE_XR_DATA: - if (ah->ah_version != AR5K_AR5212) - ATH5K_ERR(ah->ah_sc, - "XR data queues only supported in" - " 5212!\n"); - queue = AR5K_TX_QUEUE_ID_XR_DATA; - break; - default: - return -EINVAL; - } - } - - /* - * Setup internal queue structure - */ - memset(&ah->ah_txq[queue], 0, sizeof(struct ath5k_txq_info)); - ah->ah_txq[queue].tqi_type = queue_type; - - if (queue_info != NULL) { - queue_info->tqi_type = queue_type; - ret = ath5k_hw_setup_tx_queueprops(ah, queue, queue_info); - if (ret) - return ret; - } - /* - * We use ah_txq_status to hold a temp value for - * the Secondary interrupt mask registers on 5211+ - * check out ath5k_hw_reset_tx_queue - */ - AR5K_Q_ENABLE_BITS(ah->ah_txq_status, queue); - - return queue; -} - -/* - * Setup a transmit queue - */ -int ath5k_hw_setup_tx_queueprops(struct ath5k_hw *ah, int queue, - const struct ath5k_txq_info *queue_info) -{ - ATH5K_TRACE(ah->ah_sc); - AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); - - if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) - return -EIO; - - memcpy(&ah->ah_txq[queue], queue_info, sizeof(struct ath5k_txq_info)); - - /*XXX: Is this supported on 5210 ?*/ - if ((queue_info->tqi_type == AR5K_TX_QUEUE_DATA && - ((queue_info->tqi_subtype == AR5K_WME_AC_VI) || - (queue_info->tqi_subtype == AR5K_WME_AC_VO))) || - queue_info->tqi_type == AR5K_TX_QUEUE_UAPSD) - ah->ah_txq[queue].tqi_flags |= AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS; - - return 0; -} - -/* - * Get properties for a specific transmit queue - */ -int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, - struct ath5k_txq_info *queue_info) -{ - ATH5K_TRACE(ah->ah_sc); - memcpy(queue_info, &ah->ah_txq[queue], sizeof(struct ath5k_txq_info)); - return 0; -} - -/* - * Set a transmit queue inactive - */ -void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue) -{ - ATH5K_TRACE(ah->ah_sc); - if (WARN_ON(queue >= ah->ah_capabilities.cap_queues.q_tx_num)) - return; - - /* This queue will be skipped in further operations */ - ah->ah_txq[queue].tqi_type = AR5K_TX_QUEUE_INACTIVE; - /*For SIMR setup*/ - AR5K_Q_DISABLE_BITS(ah->ah_txq_status, queue); -} - -/* - * Set DFS params for a transmit queue - */ -int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue) -{ - u32 cw_min, cw_max, retry_lg, retry_sh; - struct ath5k_txq_info *tq = &ah->ah_txq[queue]; - - ATH5K_TRACE(ah->ah_sc); - AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); - - tq = &ah->ah_txq[queue]; - - if (tq->tqi_type == AR5K_TX_QUEUE_INACTIVE) - return 0; - - if (ah->ah_version == AR5K_AR5210) { - /* Only handle data queues, others will be ignored */ - if (tq->tqi_type != AR5K_TX_QUEUE_DATA) - return 0; - - /* Set Slot time */ - ath5k_hw_reg_write(ah, ah->ah_turbo ? - AR5K_INIT_SLOT_TIME_TURBO : AR5K_INIT_SLOT_TIME, - AR5K_SLOT_TIME); - /* Set ACK_CTS timeout */ - ath5k_hw_reg_write(ah, ah->ah_turbo ? - AR5K_INIT_ACK_CTS_TIMEOUT_TURBO : - AR5K_INIT_ACK_CTS_TIMEOUT, AR5K_SLOT_TIME); - /* Set Transmit Latency */ - ath5k_hw_reg_write(ah, ah->ah_turbo ? - AR5K_INIT_TRANSMIT_LATENCY_TURBO : - AR5K_INIT_TRANSMIT_LATENCY, AR5K_USEC_5210); - /* Set IFS0 */ - if (ah->ah_turbo) - ath5k_hw_reg_write(ah, ((AR5K_INIT_SIFS_TURBO + - (ah->ah_aifs + tq->tqi_aifs) * - AR5K_INIT_SLOT_TIME_TURBO) << - AR5K_IFS0_DIFS_S) | AR5K_INIT_SIFS_TURBO, - AR5K_IFS0); - else - ath5k_hw_reg_write(ah, ((AR5K_INIT_SIFS + - (ah->ah_aifs + tq->tqi_aifs) * - AR5K_INIT_SLOT_TIME) << AR5K_IFS0_DIFS_S) | - AR5K_INIT_SIFS, AR5K_IFS0); - - /* Set IFS1 */ - ath5k_hw_reg_write(ah, ah->ah_turbo ? - AR5K_INIT_PROTO_TIME_CNTRL_TURBO : - AR5K_INIT_PROTO_TIME_CNTRL, AR5K_IFS1); - /* Set AR5K_PHY_SETTLING */ - ath5k_hw_reg_write(ah, ah->ah_turbo ? - (ath5k_hw_reg_read(ah, AR5K_PHY_SETTLING) & ~0x7F) - | 0x38 : - (ath5k_hw_reg_read(ah, AR5K_PHY_SETTLING) & ~0x7F) - | 0x1C, - AR5K_PHY_SETTLING); - /* Set Frame Control Register */ - ath5k_hw_reg_write(ah, ah->ah_turbo ? - (AR5K_PHY_FRAME_CTL_INI | AR5K_PHY_TURBO_MODE | - AR5K_PHY_TURBO_SHORT | 0x2020) : - (AR5K_PHY_FRAME_CTL_INI | 0x1020), - AR5K_PHY_FRAME_CTL_5210); - } - - /* - * Calculate cwmin/max by channel mode - */ - cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN; - cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX; - ah->ah_aifs = AR5K_TUNE_AIFS; - /*XR is only supported on 5212*/ - if (IS_CHAN_XR(ah->ah_current_channel) && - ah->ah_version == AR5K_AR5212) { - cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN_XR; - cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX_XR; - ah->ah_aifs = AR5K_TUNE_AIFS_XR; - /*B mode is not supported on 5210*/ - } else if (IS_CHAN_B(ah->ah_current_channel) && - ah->ah_version != AR5K_AR5210) { - cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN_11B; - cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX_11B; - ah->ah_aifs = AR5K_TUNE_AIFS_11B; - } - - cw_min = 1; - while (cw_min < ah->ah_cw_min) - cw_min = (cw_min << 1) | 1; - - cw_min = tq->tqi_cw_min < 0 ? (cw_min >> (-tq->tqi_cw_min)) : - ((cw_min << tq->tqi_cw_min) + (1 << tq->tqi_cw_min) - 1); - cw_max = tq->tqi_cw_max < 0 ? (cw_max >> (-tq->tqi_cw_max)) : - ((cw_max << tq->tqi_cw_max) + (1 << tq->tqi_cw_max) - 1); - - /* - * Calculate and set retry limits - */ - if (ah->ah_software_retry) { - /* XXX Need to test this */ - retry_lg = ah->ah_limit_tx_retries; - retry_sh = retry_lg = retry_lg > AR5K_DCU_RETRY_LMT_SH_RETRY ? - AR5K_DCU_RETRY_LMT_SH_RETRY : retry_lg; - } else { - retry_lg = AR5K_INIT_LG_RETRY; - retry_sh = AR5K_INIT_SH_RETRY; - } - - /*No QCU/DCU [5210]*/ - if (ah->ah_version == AR5K_AR5210) { - ath5k_hw_reg_write(ah, - (cw_min << AR5K_NODCU_RETRY_LMT_CW_MIN_S) - | AR5K_REG_SM(AR5K_INIT_SLG_RETRY, - AR5K_NODCU_RETRY_LMT_SLG_RETRY) - | AR5K_REG_SM(AR5K_INIT_SSH_RETRY, - AR5K_NODCU_RETRY_LMT_SSH_RETRY) - | AR5K_REG_SM(retry_lg, AR5K_NODCU_RETRY_LMT_LG_RETRY) - | AR5K_REG_SM(retry_sh, AR5K_NODCU_RETRY_LMT_SH_RETRY), - AR5K_NODCU_RETRY_LMT); - } else { - /*QCU/DCU [5211+]*/ - ath5k_hw_reg_write(ah, - AR5K_REG_SM(AR5K_INIT_SLG_RETRY, - AR5K_DCU_RETRY_LMT_SLG_RETRY) | - AR5K_REG_SM(AR5K_INIT_SSH_RETRY, - AR5K_DCU_RETRY_LMT_SSH_RETRY) | - AR5K_REG_SM(retry_lg, AR5K_DCU_RETRY_LMT_LG_RETRY) | - AR5K_REG_SM(retry_sh, AR5K_DCU_RETRY_LMT_SH_RETRY), - AR5K_QUEUE_DFS_RETRY_LIMIT(queue)); - - /*===Rest is also for QCU/DCU only [5211+]===*/ - - /* - * Set initial content window (cw_min/cw_max) - * and arbitrated interframe space (aifs)... - */ - ath5k_hw_reg_write(ah, - AR5K_REG_SM(cw_min, AR5K_DCU_LCL_IFS_CW_MIN) | - AR5K_REG_SM(cw_max, AR5K_DCU_LCL_IFS_CW_MAX) | - AR5K_REG_SM(ah->ah_aifs + tq->tqi_aifs, - AR5K_DCU_LCL_IFS_AIFS), - AR5K_QUEUE_DFS_LOCAL_IFS(queue)); - - /* - * Set misc registers - */ - ath5k_hw_reg_write(ah, AR5K_QCU_MISC_DCU_EARLY, - AR5K_QUEUE_MISC(queue)); - - if (tq->tqi_cbr_period) { - ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_cbr_period, - AR5K_QCU_CBRCFG_INTVAL) | - AR5K_REG_SM(tq->tqi_cbr_overflow_limit, - AR5K_QCU_CBRCFG_ORN_THRES), - AR5K_QUEUE_CBRCFG(queue)); - AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), - AR5K_QCU_MISC_FRSHED_CBR); - if (tq->tqi_cbr_overflow_limit) - AR5K_REG_ENABLE_BITS(ah, - AR5K_QUEUE_MISC(queue), - AR5K_QCU_MISC_CBR_THRES_ENABLE); - } - - if (tq->tqi_ready_time) - ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_ready_time, - AR5K_QCU_RDYTIMECFG_INTVAL) | - AR5K_QCU_RDYTIMECFG_ENABLE, - AR5K_QUEUE_RDYTIMECFG(queue)); - - if (tq->tqi_burst_time) { - ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_burst_time, - AR5K_DCU_CHAN_TIME_DUR) | - AR5K_DCU_CHAN_TIME_ENABLE, - AR5K_QUEUE_DFS_CHANNEL_TIME(queue)); - - if (tq->tqi_flags & AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE) - AR5K_REG_ENABLE_BITS(ah, - AR5K_QUEUE_MISC(queue), - AR5K_QCU_MISC_RDY_VEOL_POLICY); - } - - if (tq->tqi_flags & AR5K_TXQ_FLAG_BACKOFF_DISABLE) - ath5k_hw_reg_write(ah, AR5K_DCU_MISC_POST_FR_BKOFF_DIS, - AR5K_QUEUE_DFS_MISC(queue)); - - if (tq->tqi_flags & AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE) - ath5k_hw_reg_write(ah, AR5K_DCU_MISC_BACKOFF_FRAG, - AR5K_QUEUE_DFS_MISC(queue)); - - /* - * Set registers by queue type - */ - switch (tq->tqi_type) { - case AR5K_TX_QUEUE_BEACON: - AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), - AR5K_QCU_MISC_FRSHED_DBA_GT | - AR5K_QCU_MISC_CBREXP_BCN | - AR5K_QCU_MISC_BCN_ENABLE); - - AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue), - (AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL << - AR5K_DCU_MISC_ARBLOCK_CTL_S) | - AR5K_DCU_MISC_POST_FR_BKOFF_DIS | - AR5K_DCU_MISC_BCN_ENABLE); - - ath5k_hw_reg_write(ah, ((AR5K_TUNE_BEACON_INTERVAL - - (AR5K_TUNE_SW_BEACON_RESP - - AR5K_TUNE_DMA_BEACON_RESP) - - AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF) * 1024) | - AR5K_QCU_RDYTIMECFG_ENABLE, - AR5K_QUEUE_RDYTIMECFG(queue)); - break; - - case AR5K_TX_QUEUE_CAB: - AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), - AR5K_QCU_MISC_FRSHED_DBA_GT | - AR5K_QCU_MISC_CBREXP | - AR5K_QCU_MISC_CBREXP_BCN); - - AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue), - (AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL << - AR5K_DCU_MISC_ARBLOCK_CTL_S)); - break; - - case AR5K_TX_QUEUE_UAPSD: - AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), - AR5K_QCU_MISC_CBREXP); - break; - - case AR5K_TX_QUEUE_DATA: - default: - break; - } - - /* - * Enable interrupts for this tx queue - * in the secondary interrupt mask registers - */ - if (tq->tqi_flags & AR5K_TXQ_FLAG_TXOKINT_ENABLE) - AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txok, queue); - - if (tq->tqi_flags & AR5K_TXQ_FLAG_TXERRINT_ENABLE) - AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txerr, queue); - - if (tq->tqi_flags & AR5K_TXQ_FLAG_TXURNINT_ENABLE) - AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txurn, queue); - - if (tq->tqi_flags & AR5K_TXQ_FLAG_TXDESCINT_ENABLE) - AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txdesc, queue); - - if (tq->tqi_flags & AR5K_TXQ_FLAG_TXEOLINT_ENABLE) - AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txeol, queue); - - - /* Update secondary interrupt mask registers */ - ah->ah_txq_imr_txok &= ah->ah_txq_status; - ah->ah_txq_imr_txerr &= ah->ah_txq_status; - ah->ah_txq_imr_txurn &= ah->ah_txq_status; - ah->ah_txq_imr_txdesc &= ah->ah_txq_status; - ah->ah_txq_imr_txeol &= ah->ah_txq_status; - - ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txok, - AR5K_SIMR0_QCU_TXOK) | - AR5K_REG_SM(ah->ah_txq_imr_txdesc, - AR5K_SIMR0_QCU_TXDESC), AR5K_SIMR0); - ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txerr, - AR5K_SIMR1_QCU_TXERR) | - AR5K_REG_SM(ah->ah_txq_imr_txeol, - AR5K_SIMR1_QCU_TXEOL), AR5K_SIMR1); - ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txurn, - AR5K_SIMR2_QCU_TXURN), AR5K_SIMR2); - } - - return 0; -} - -/* - * Get number of pending frames - * for a specific queue [5211+] - */ -u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue) { - ATH5K_TRACE(ah->ah_sc); - AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); - - /* Return if queue is declared inactive */ - if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) - return false; - - /* XXX: How about AR5K_CFG_TXCNT ? */ - if (ah->ah_version == AR5K_AR5210) - return false; - - return AR5K_QUEUE_STATUS(queue) & AR5K_QCU_STS_FRMPENDCNT; -} - -/* - * Set slot time - */ -int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time) -{ - ATH5K_TRACE(ah->ah_sc); - if (slot_time < AR5K_SLOT_TIME_9 || slot_time > AR5K_SLOT_TIME_MAX) - return -EINVAL; - - if (ah->ah_version == AR5K_AR5210) - ath5k_hw_reg_write(ah, ath5k_hw_htoclock(slot_time, - ah->ah_turbo), AR5K_SLOT_TIME); - else - ath5k_hw_reg_write(ah, slot_time, AR5K_DCU_GBL_IFS_SLOT); - - return 0; -} - -/* - * Get slot time - */ -unsigned int ath5k_hw_get_slot_time(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - if (ah->ah_version == AR5K_AR5210) - return ath5k_hw_clocktoh(ath5k_hw_reg_read(ah, - AR5K_SLOT_TIME) & 0xffff, ah->ah_turbo); - else - return ath5k_hw_reg_read(ah, AR5K_DCU_GBL_IFS_SLOT) & 0xffff; -} - - -/******************************\ - Hardware Descriptor Functions -\******************************/ - -/* - * TX Descriptor - */ - -/* - * Initialize the 2-word tx descriptor on 5210/5211 - */ -static int -ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, - unsigned int pkt_len, unsigned int hdr_len, enum ath5k_pkt_type type, - unsigned int tx_power, unsigned int tx_rate0, unsigned int tx_tries0, - unsigned int key_index, unsigned int antenna_mode, unsigned int flags, - unsigned int rtscts_rate, unsigned int rtscts_duration) -{ - u32 frame_type; - struct ath5k_hw_2w_tx_ctl *tx_ctl; - unsigned int frame_len; - - tx_ctl = &desc->ud.ds_tx5210.tx_ctl; - - /* - * Validate input - * - Zero retries don't make sense. - * - A zero rate will put the HW into a mode where it continously sends - * noise on the channel, so it is important to avoid this. - */ - if (unlikely(tx_tries0 == 0)) { - ATH5K_ERR(ah->ah_sc, "zero retries\n"); - WARN_ON(1); - return -EINVAL; - } - if (unlikely(tx_rate0 == 0)) { - ATH5K_ERR(ah->ah_sc, "zero rate\n"); - WARN_ON(1); - return -EINVAL; - } - - /* Clear descriptor */ - memset(&desc->ud.ds_tx5210, 0, sizeof(struct ath5k_hw_5210_tx_desc)); - - /* Setup control descriptor */ - - /* Verify and set frame length */ - - /* remove padding we might have added before */ - frame_len = pkt_len - (hdr_len & 3) + FCS_LEN; - - if (frame_len & ~AR5K_2W_TX_DESC_CTL0_FRAME_LEN) - return -EINVAL; - - tx_ctl->tx_control_0 = frame_len & AR5K_2W_TX_DESC_CTL0_FRAME_LEN; - - /* Verify and set buffer length */ - - /* NB: beacon's BufLen must be a multiple of 4 bytes */ - if(type == AR5K_PKT_TYPE_BEACON) - pkt_len = roundup(pkt_len, 4); - - if (pkt_len & ~AR5K_2W_TX_DESC_CTL1_BUF_LEN) - return -EINVAL; - - tx_ctl->tx_control_1 = pkt_len & AR5K_2W_TX_DESC_CTL1_BUF_LEN; - - /* - * Verify and set header length - * XXX: I only found that on 5210 code, does it work on 5211 ? - */ - if (ah->ah_version == AR5K_AR5210) { - if (hdr_len & ~AR5K_2W_TX_DESC_CTL0_HEADER_LEN) - return -EINVAL; - tx_ctl->tx_control_0 |= - AR5K_REG_SM(hdr_len, AR5K_2W_TX_DESC_CTL0_HEADER_LEN); - } - - /*Diferences between 5210-5211*/ - if (ah->ah_version == AR5K_AR5210) { - switch (type) { - case AR5K_PKT_TYPE_BEACON: - case AR5K_PKT_TYPE_PROBE_RESP: - frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_NO_DELAY; - case AR5K_PKT_TYPE_PIFS: - frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_PIFS; - default: - frame_type = type /*<< 2 ?*/; - } - - tx_ctl->tx_control_0 |= - AR5K_REG_SM(frame_type, AR5K_2W_TX_DESC_CTL0_FRAME_TYPE) | - AR5K_REG_SM(tx_rate0, AR5K_2W_TX_DESC_CTL0_XMIT_RATE); - } else { - tx_ctl->tx_control_0 |= - AR5K_REG_SM(tx_rate0, AR5K_2W_TX_DESC_CTL0_XMIT_RATE) | - AR5K_REG_SM(antenna_mode, AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT); - tx_ctl->tx_control_1 |= - AR5K_REG_SM(type, AR5K_2W_TX_DESC_CTL1_FRAME_TYPE); - } -#define _TX_FLAGS(_c, _flag) \ - if (flags & AR5K_TXDESC_##_flag) \ - tx_ctl->tx_control_##_c |= \ - AR5K_2W_TX_DESC_CTL##_c##_##_flag - - _TX_FLAGS(0, CLRDMASK); - _TX_FLAGS(0, VEOL); - _TX_FLAGS(0, INTREQ); - _TX_FLAGS(0, RTSENA); - _TX_FLAGS(1, NOACK); - -#undef _TX_FLAGS - - /* - * WEP crap - */ - if (key_index != AR5K_TXKEYIX_INVALID) { - tx_ctl->tx_control_0 |= - AR5K_2W_TX_DESC_CTL0_ENCRYPT_KEY_VALID; - tx_ctl->tx_control_1 |= - AR5K_REG_SM(key_index, - AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX); - } - - /* - * RTS/CTS Duration [5210 ?] - */ - if ((ah->ah_version == AR5K_AR5210) && - (flags & (AR5K_TXDESC_RTSENA | AR5K_TXDESC_CTSENA))) - tx_ctl->tx_control_1 |= rtscts_duration & - AR5K_2W_TX_DESC_CTL1_RTS_DURATION; - - return 0; -} - -/* - * Initialize the 4-word tx descriptor on 5212 - */ -static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *ah, - struct ath5k_desc *desc, unsigned int pkt_len, unsigned int hdr_len, - enum ath5k_pkt_type type, unsigned int tx_power, unsigned int tx_rate0, - unsigned int tx_tries0, unsigned int key_index, - unsigned int antenna_mode, unsigned int flags, unsigned int rtscts_rate, - unsigned int rtscts_duration) -{ - struct ath5k_hw_4w_tx_ctl *tx_ctl; - unsigned int frame_len; - - ATH5K_TRACE(ah->ah_sc); - tx_ctl = &desc->ud.ds_tx5212.tx_ctl; - - /* - * Validate input - * - Zero retries don't make sense. - * - A zero rate will put the HW into a mode where it continously sends - * noise on the channel, so it is important to avoid this. - */ - if (unlikely(tx_tries0 == 0)) { - ATH5K_ERR(ah->ah_sc, "zero retries\n"); - WARN_ON(1); - return -EINVAL; - } - if (unlikely(tx_rate0 == 0)) { - ATH5K_ERR(ah->ah_sc, "zero rate\n"); - WARN_ON(1); - return -EINVAL; - } - - /* Clear descriptor */ - memset(&desc->ud.ds_tx5212, 0, sizeof(struct ath5k_hw_5212_tx_desc)); - - /* Setup control descriptor */ - - /* Verify and set frame length */ - - /* remove padding we might have added before */ - frame_len = pkt_len - (hdr_len & 3) + FCS_LEN; - - if (frame_len & ~AR5K_4W_TX_DESC_CTL0_FRAME_LEN) - return -EINVAL; - - tx_ctl->tx_control_0 = frame_len & AR5K_4W_TX_DESC_CTL0_FRAME_LEN; - - /* Verify and set buffer length */ - - /* NB: beacon's BufLen must be a multiple of 4 bytes */ - if(type == AR5K_PKT_TYPE_BEACON) - pkt_len = roundup(pkt_len, 4); - - if (pkt_len & ~AR5K_4W_TX_DESC_CTL1_BUF_LEN) - return -EINVAL; - - tx_ctl->tx_control_1 = pkt_len & AR5K_4W_TX_DESC_CTL1_BUF_LEN; - - tx_ctl->tx_control_0 |= - AR5K_REG_SM(tx_power, AR5K_4W_TX_DESC_CTL0_XMIT_POWER) | - AR5K_REG_SM(antenna_mode, AR5K_4W_TX_DESC_CTL0_ANT_MODE_XMIT); - tx_ctl->tx_control_1 |= AR5K_REG_SM(type, - AR5K_4W_TX_DESC_CTL1_FRAME_TYPE); - tx_ctl->tx_control_2 = AR5K_REG_SM(tx_tries0 + AR5K_TUNE_HWTXTRIES, - AR5K_4W_TX_DESC_CTL2_XMIT_TRIES0); - tx_ctl->tx_control_3 = tx_rate0 & AR5K_4W_TX_DESC_CTL3_XMIT_RATE0; - -#define _TX_FLAGS(_c, _flag) \ - if (flags & AR5K_TXDESC_##_flag) \ - tx_ctl->tx_control_##_c |= \ - AR5K_4W_TX_DESC_CTL##_c##_##_flag - - _TX_FLAGS(0, CLRDMASK); - _TX_FLAGS(0, VEOL); - _TX_FLAGS(0, INTREQ); - _TX_FLAGS(0, RTSENA); - _TX_FLAGS(0, CTSENA); - _TX_FLAGS(1, NOACK); - -#undef _TX_FLAGS - - /* - * WEP crap - */ - if (key_index != AR5K_TXKEYIX_INVALID) { - tx_ctl->tx_control_0 |= AR5K_4W_TX_DESC_CTL0_ENCRYPT_KEY_VALID; - tx_ctl->tx_control_1 |= AR5K_REG_SM(key_index, - AR5K_4W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX); - } - - /* - * RTS/CTS - */ - if (flags & (AR5K_TXDESC_RTSENA | AR5K_TXDESC_CTSENA)) { - if ((flags & AR5K_TXDESC_RTSENA) && - (flags & AR5K_TXDESC_CTSENA)) - return -EINVAL; - tx_ctl->tx_control_2 |= rtscts_duration & - AR5K_4W_TX_DESC_CTL2_RTS_DURATION; - tx_ctl->tx_control_3 |= AR5K_REG_SM(rtscts_rate, - AR5K_4W_TX_DESC_CTL3_RTS_CTS_RATE); - } - - return 0; -} - -/* - * Initialize a 4-word multirate tx descriptor on 5212 - */ -static int -ath5k_hw_setup_xr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, - unsigned int tx_rate1, u_int tx_tries1, u_int tx_rate2, u_int tx_tries2, - unsigned int tx_rate3, u_int tx_tries3) -{ - struct ath5k_hw_4w_tx_ctl *tx_ctl; - - /* - * Rates can be 0 as long as the retry count is 0 too. - * A zero rate and nonzero retry count will put the HW into a mode where - * it continously sends noise on the channel, so it is important to - * avoid this. - */ - if (unlikely((tx_rate1 == 0 && tx_tries1 != 0) || - (tx_rate2 == 0 && tx_tries2 != 0) || - (tx_rate3 == 0 && tx_tries3 != 0))) { - ATH5K_ERR(ah->ah_sc, "zero rate\n"); - WARN_ON(1); - return -EINVAL; - } - - if (ah->ah_version == AR5K_AR5212) { - tx_ctl = &desc->ud.ds_tx5212.tx_ctl; - -#define _XTX_TRIES(_n) \ - if (tx_tries##_n) { \ - tx_ctl->tx_control_2 |= \ - AR5K_REG_SM(tx_tries##_n, \ - AR5K_4W_TX_DESC_CTL2_XMIT_TRIES##_n); \ - tx_ctl->tx_control_3 |= \ - AR5K_REG_SM(tx_rate##_n, \ - AR5K_4W_TX_DESC_CTL3_XMIT_RATE##_n); \ - } - - _XTX_TRIES(1); - _XTX_TRIES(2); - _XTX_TRIES(3); - -#undef _XTX_TRIES - - return 1; - } - - return 0; -} - -/* - * Proccess the tx status descriptor on 5210/5211 - */ -static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *ah, - struct ath5k_desc *desc, struct ath5k_tx_status *ts) -{ - struct ath5k_hw_2w_tx_ctl *tx_ctl; - struct ath5k_hw_tx_status *tx_status; - - ATH5K_TRACE(ah->ah_sc); - - tx_ctl = &desc->ud.ds_tx5210.tx_ctl; - tx_status = &desc->ud.ds_tx5210.tx_stat; - - /* No frame has been send or error */ - if (unlikely((tx_status->tx_status_1 & AR5K_DESC_TX_STATUS1_DONE) == 0)) - return -EINPROGRESS; - - /* - * Get descriptor status - */ - ts->ts_tstamp = AR5K_REG_MS(tx_status->tx_status_0, - AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP); - ts->ts_shortretry = AR5K_REG_MS(tx_status->tx_status_0, - AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT); - ts->ts_longretry = AR5K_REG_MS(tx_status->tx_status_0, - AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT); - /*TODO: ts->ts_virtcol + test*/ - ts->ts_seqnum = AR5K_REG_MS(tx_status->tx_status_1, - AR5K_DESC_TX_STATUS1_SEQ_NUM); - ts->ts_rssi = AR5K_REG_MS(tx_status->tx_status_1, - AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH); - ts->ts_antenna = 1; - ts->ts_status = 0; - ts->ts_rate = AR5K_REG_MS(tx_ctl->tx_control_0, - AR5K_2W_TX_DESC_CTL0_XMIT_RATE); - - if ((tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK) == 0){ - if (tx_status->tx_status_0 & - AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES) - ts->ts_status |= AR5K_TXERR_XRETRY; - - if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN) - ts->ts_status |= AR5K_TXERR_FIFO; - - if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FILTERED) - ts->ts_status |= AR5K_TXERR_FILT; - } - - return 0; -} - -/* - * Proccess a tx descriptor on 5212 - */ -static int ath5k_hw_proc_4word_tx_status(struct ath5k_hw *ah, - struct ath5k_desc *desc, struct ath5k_tx_status *ts) -{ - struct ath5k_hw_4w_tx_ctl *tx_ctl; - struct ath5k_hw_tx_status *tx_status; - - ATH5K_TRACE(ah->ah_sc); - - tx_ctl = &desc->ud.ds_tx5212.tx_ctl; - tx_status = &desc->ud.ds_tx5212.tx_stat; - - /* No frame has been send or error */ - if (unlikely((tx_status->tx_status_1 & AR5K_DESC_TX_STATUS1_DONE) == 0)) - return -EINPROGRESS; - - /* - * Get descriptor status - */ - ts->ts_tstamp = AR5K_REG_MS(tx_status->tx_status_0, - AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP); - ts->ts_shortretry = AR5K_REG_MS(tx_status->tx_status_0, - AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT); - ts->ts_longretry = AR5K_REG_MS(tx_status->tx_status_0, - AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT); - ts->ts_seqnum = AR5K_REG_MS(tx_status->tx_status_1, - AR5K_DESC_TX_STATUS1_SEQ_NUM); - ts->ts_rssi = AR5K_REG_MS(tx_status->tx_status_1, - AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH); - ts->ts_antenna = (tx_status->tx_status_1 & - AR5K_DESC_TX_STATUS1_XMIT_ANTENNA) ? 2 : 1; - ts->ts_status = 0; - - switch (AR5K_REG_MS(tx_status->tx_status_1, - AR5K_DESC_TX_STATUS1_FINAL_TS_INDEX)) { - case 0: - ts->ts_rate = tx_ctl->tx_control_3 & - AR5K_4W_TX_DESC_CTL3_XMIT_RATE0; - break; - case 1: - ts->ts_rate = AR5K_REG_MS(tx_ctl->tx_control_3, - AR5K_4W_TX_DESC_CTL3_XMIT_RATE1); - ts->ts_longretry += AR5K_REG_MS(tx_ctl->tx_control_2, - AR5K_4W_TX_DESC_CTL2_XMIT_TRIES1); - break; - case 2: - ts->ts_rate = AR5K_REG_MS(tx_ctl->tx_control_3, - AR5K_4W_TX_DESC_CTL3_XMIT_RATE2); - ts->ts_longretry += AR5K_REG_MS(tx_ctl->tx_control_2, - AR5K_4W_TX_DESC_CTL2_XMIT_TRIES2); - break; - case 3: - ts->ts_rate = AR5K_REG_MS(tx_ctl->tx_control_3, - AR5K_4W_TX_DESC_CTL3_XMIT_RATE3); - ts->ts_longretry += AR5K_REG_MS(tx_ctl->tx_control_2, - AR5K_4W_TX_DESC_CTL2_XMIT_TRIES3); - break; - } - - if ((tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK) == 0){ - if (tx_status->tx_status_0 & - AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES) - ts->ts_status |= AR5K_TXERR_XRETRY; - - if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN) - ts->ts_status |= AR5K_TXERR_FIFO; - - if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FILTERED) - ts->ts_status |= AR5K_TXERR_FILT; - } - - return 0; -} - -/* - * RX Descriptor - */ - -/* - * Initialize an rx descriptor - */ -int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, - u32 size, unsigned int flags) -{ - struct ath5k_hw_rx_ctl *rx_ctl; - - ATH5K_TRACE(ah->ah_sc); - rx_ctl = &desc->ud.ds_rx.rx_ctl; - - /* - * Clear the descriptor - * If we don't clean the status descriptor, - * while scanning we get too many results, - * most of them virtual, after some secs - * of scanning system hangs. M.F. - */ - memset(&desc->ud.ds_rx, 0, sizeof(struct ath5k_hw_all_rx_desc)); - - /* Setup descriptor */ - rx_ctl->rx_control_1 = size & AR5K_DESC_RX_CTL1_BUF_LEN; - if (unlikely(rx_ctl->rx_control_1 != size)) - return -EINVAL; - - if (flags & AR5K_RXDESC_INTREQ) - rx_ctl->rx_control_1 |= AR5K_DESC_RX_CTL1_INTREQ; - - return 0; -} - -/* - * Proccess the rx status descriptor on 5210/5211 - */ -static int ath5k_hw_proc_5210_rx_status(struct ath5k_hw *ah, - struct ath5k_desc *desc, struct ath5k_rx_status *rs) -{ - struct ath5k_hw_rx_status *rx_status; - - rx_status = &desc->ud.ds_rx.u.rx_stat; - - /* No frame received / not ready */ - if (unlikely((rx_status->rx_status_1 & AR5K_5210_RX_DESC_STATUS1_DONE) - == 0)) - return -EINPROGRESS; - - /* - * Frame receive status - */ - rs->rs_datalen = rx_status->rx_status_0 & - AR5K_5210_RX_DESC_STATUS0_DATA_LEN; - rs->rs_rssi = AR5K_REG_MS(rx_status->rx_status_0, - AR5K_5210_RX_DESC_STATUS0_RECEIVE_SIGNAL); - rs->rs_rate = AR5K_REG_MS(rx_status->rx_status_0, - AR5K_5210_RX_DESC_STATUS0_RECEIVE_RATE); - rs->rs_antenna = rx_status->rx_status_0 & - AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANTENNA; - rs->rs_more = rx_status->rx_status_0 & - AR5K_5210_RX_DESC_STATUS0_MORE; - /* TODO: this timestamp is 13 bit, later on we assume 15 bit */ - rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1, - AR5K_5210_RX_DESC_STATUS1_RECEIVE_TIMESTAMP); - rs->rs_status = 0; - rs->rs_phyerr = 0; - - /* - * Key table status - */ - if (rx_status->rx_status_1 & AR5K_5210_RX_DESC_STATUS1_KEY_INDEX_VALID) - rs->rs_keyix = AR5K_REG_MS(rx_status->rx_status_1, - AR5K_5210_RX_DESC_STATUS1_KEY_INDEX); - else - rs->rs_keyix = AR5K_RXKEYIX_INVALID; - - /* - * Receive/descriptor errors - */ - if ((rx_status->rx_status_1 & - AR5K_5210_RX_DESC_STATUS1_FRAME_RECEIVE_OK) == 0) { - if (rx_status->rx_status_1 & - AR5K_5210_RX_DESC_STATUS1_CRC_ERROR) - rs->rs_status |= AR5K_RXERR_CRC; - - if (rx_status->rx_status_1 & - AR5K_5210_RX_DESC_STATUS1_FIFO_OVERRUN) - rs->rs_status |= AR5K_RXERR_FIFO; - - if (rx_status->rx_status_1 & - AR5K_5210_RX_DESC_STATUS1_PHY_ERROR) { - rs->rs_status |= AR5K_RXERR_PHY; - rs->rs_phyerr |= AR5K_REG_MS(rx_status->rx_status_1, - AR5K_5210_RX_DESC_STATUS1_PHY_ERROR); - } - - if (rx_status->rx_status_1 & - AR5K_5210_RX_DESC_STATUS1_DECRYPT_CRC_ERROR) - rs->rs_status |= AR5K_RXERR_DECRYPT; - } - - return 0; -} - -/* - * Proccess the rx status descriptor on 5212 - */ -static int ath5k_hw_proc_5212_rx_status(struct ath5k_hw *ah, - struct ath5k_desc *desc, struct ath5k_rx_status *rs) -{ - struct ath5k_hw_rx_status *rx_status; - struct ath5k_hw_rx_error *rx_err; - - ATH5K_TRACE(ah->ah_sc); - rx_status = &desc->ud.ds_rx.u.rx_stat; - - /* Overlay on error */ - rx_err = &desc->ud.ds_rx.u.rx_err; - - /* No frame received / not ready */ - if (unlikely((rx_status->rx_status_1 & AR5K_5212_RX_DESC_STATUS1_DONE) - == 0)) - return -EINPROGRESS; - - /* - * Frame receive status - */ - rs->rs_datalen = rx_status->rx_status_0 & - AR5K_5212_RX_DESC_STATUS0_DATA_LEN; - rs->rs_rssi = AR5K_REG_MS(rx_status->rx_status_0, - AR5K_5212_RX_DESC_STATUS0_RECEIVE_SIGNAL); - rs->rs_rate = AR5K_REG_MS(rx_status->rx_status_0, - AR5K_5212_RX_DESC_STATUS0_RECEIVE_RATE); - rs->rs_antenna = rx_status->rx_status_0 & - AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA; - rs->rs_more = rx_status->rx_status_0 & - AR5K_5212_RX_DESC_STATUS0_MORE; - rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1, - AR5K_5212_RX_DESC_STATUS1_RECEIVE_TIMESTAMP); - rs->rs_status = 0; - rs->rs_phyerr = 0; - - /* - * Key table status - */ - if (rx_status->rx_status_1 & AR5K_5212_RX_DESC_STATUS1_KEY_INDEX_VALID) - rs->rs_keyix = AR5K_REG_MS(rx_status->rx_status_1, - AR5K_5212_RX_DESC_STATUS1_KEY_INDEX); - else - rs->rs_keyix = AR5K_RXKEYIX_INVALID; - - /* - * Receive/descriptor errors - */ - if ((rx_status->rx_status_1 & - AR5K_5212_RX_DESC_STATUS1_FRAME_RECEIVE_OK) == 0) { - if (rx_status->rx_status_1 & - AR5K_5212_RX_DESC_STATUS1_CRC_ERROR) - rs->rs_status |= AR5K_RXERR_CRC; - - if (rx_status->rx_status_1 & - AR5K_5212_RX_DESC_STATUS1_PHY_ERROR) { - rs->rs_status |= AR5K_RXERR_PHY; - rs->rs_phyerr |= AR5K_REG_MS(rx_err->rx_error_1, - AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE); - } - - if (rx_status->rx_status_1 & - AR5K_5212_RX_DESC_STATUS1_DECRYPT_CRC_ERROR) - rs->rs_status |= AR5K_RXERR_DECRYPT; - - if (rx_status->rx_status_1 & - AR5K_5212_RX_DESC_STATUS1_MIC_ERROR) - rs->rs_status |= AR5K_RXERR_MIC; - } - - return 0; -} - - -/****************\ - GPIO Functions -\****************/ - -/* - * Set led state - */ -void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state) -{ - u32 led; - /*5210 has different led mode handling*/ - u32 led_5210; - - ATH5K_TRACE(ah->ah_sc); - - /*Reset led status*/ - if (ah->ah_version != AR5K_AR5210) - AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG, - AR5K_PCICFG_LEDMODE | AR5K_PCICFG_LED); - else - AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_LED); - - /* - * Some blinking values, define at your wish - */ - switch (state) { - case AR5K_LED_SCAN: - case AR5K_LED_AUTH: - led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_PEND; - led_5210 = AR5K_PCICFG_LED_PEND | AR5K_PCICFG_LED_BCTL; - break; - - case AR5K_LED_INIT: - led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_NONE; - led_5210 = AR5K_PCICFG_LED_PEND; - break; - - case AR5K_LED_ASSOC: - case AR5K_LED_RUN: - led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_ASSOC; - led_5210 = AR5K_PCICFG_LED_ASSOC; - break; - - default: - led = AR5K_PCICFG_LEDMODE_PROM | AR5K_PCICFG_LED_NONE; - led_5210 = AR5K_PCICFG_LED_PEND; - break; - } - - /*Write new status to the register*/ - if (ah->ah_version != AR5K_AR5210) - AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led); - else - AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led_5210); -} - -/* - * Set GPIO outputs - */ -int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio) -{ - ATH5K_TRACE(ah->ah_sc); - if (gpio > AR5K_NUM_GPIO) - return -EINVAL; - - ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, AR5K_GPIOCR) &~ - AR5K_GPIOCR_OUT(gpio)) | AR5K_GPIOCR_OUT(gpio), AR5K_GPIOCR); - - return 0; -} - -/* - * Set GPIO inputs - */ -int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio) -{ - ATH5K_TRACE(ah->ah_sc); - if (gpio > AR5K_NUM_GPIO) - return -EINVAL; - - ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, AR5K_GPIOCR) &~ - AR5K_GPIOCR_OUT(gpio)) | AR5K_GPIOCR_IN(gpio), AR5K_GPIOCR); - - return 0; -} - -/* - * Get GPIO state - */ -u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio) -{ - ATH5K_TRACE(ah->ah_sc); - if (gpio > AR5K_NUM_GPIO) - return 0xffffffff; - - /* GPIO input magic */ - return ((ath5k_hw_reg_read(ah, AR5K_GPIODI) & AR5K_GPIODI_M) >> gpio) & - 0x1; -} - -/* - * Set GPIO state - */ -int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val) -{ - u32 data; - ATH5K_TRACE(ah->ah_sc); - - if (gpio > AR5K_NUM_GPIO) - return -EINVAL; - - /* GPIO output magic */ - data = ath5k_hw_reg_read(ah, AR5K_GPIODO); - - data &= ~(1 << gpio); - data |= (val & 1) << gpio; - - ath5k_hw_reg_write(ah, data, AR5K_GPIODO); - - return 0; -} - -/* - * Initialize the GPIO interrupt (RFKill switch) - */ -void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, - u32 interrupt_level) -{ - u32 data; - - ATH5K_TRACE(ah->ah_sc); - if (gpio > AR5K_NUM_GPIO) - return; - - /* - * Set the GPIO interrupt - */ - data = (ath5k_hw_reg_read(ah, AR5K_GPIOCR) & - ~(AR5K_GPIOCR_INT_SEL(gpio) | AR5K_GPIOCR_INT_SELH | - AR5K_GPIOCR_INT_ENA | AR5K_GPIOCR_OUT(gpio))) | - (AR5K_GPIOCR_INT_SEL(gpio) | AR5K_GPIOCR_INT_ENA); - - ath5k_hw_reg_write(ah, interrupt_level ? data : - (data | AR5K_GPIOCR_INT_SELH), AR5K_GPIOCR); - - ah->ah_imr |= AR5K_IMR_GPIO; - - /* Enable GPIO interrupts */ - AR5K_REG_ENABLE_BITS(ah, AR5K_PIMR, AR5K_IMR_GPIO); -} - - - - -/****************\ - Misc functions -\****************/ - -int ath5k_hw_get_capability(struct ath5k_hw *ah, - enum ath5k_capability_type cap_type, - u32 capability, u32 *result) -{ - ATH5K_TRACE(ah->ah_sc); - - switch (cap_type) { - case AR5K_CAP_NUM_TXQUEUES: - if (result) { - if (ah->ah_version == AR5K_AR5210) - *result = AR5K_NUM_TX_QUEUES_NOQCU; - else - *result = AR5K_NUM_TX_QUEUES; - goto yes; - } - case AR5K_CAP_VEOL: - goto yes; - case AR5K_CAP_COMPRESSION: - if (ah->ah_version == AR5K_AR5212) - goto yes; - else - goto no; - case AR5K_CAP_BURST: - goto yes; - case AR5K_CAP_TPC: - goto yes; - case AR5K_CAP_BSSIDMASK: - if (ah->ah_version == AR5K_AR5212) - goto yes; - else - goto no; - case AR5K_CAP_XR: - if (ah->ah_version == AR5K_AR5212) - goto yes; - else - goto no; - default: - goto no; - } - -no: - return -EINVAL; -yes: - return 0; -} - -static int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid, - u16 assoc_id) -{ - ATH5K_TRACE(ah->ah_sc); - - if (ah->ah_version == AR5K_AR5210) { - AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, - AR5K_STA_ID1_NO_PSPOLL | AR5K_STA_ID1_DEFAULT_ANTENNA); - return 0; - } - - return -EIO; -} - -static int ath5k_hw_disable_pspoll(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - - if (ah->ah_version == AR5K_AR5210) { - AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, - AR5K_STA_ID1_NO_PSPOLL | AR5K_STA_ID1_DEFAULT_ANTENNA); - return 0; - } - - return -EIO; -} diff --git a/drivers/net/wireless/ath5k/initvals.c b/drivers/net/wireless/ath5k/initvals.c index 2806b21bf90b..ea2e1a20b499 100644 --- a/drivers/net/wireless/ath5k/initvals.c +++ b/drivers/net/wireless/ath5k/initvals.c @@ -1,9 +1,9 @@ /* * Initial register settings functions * - * Copyright (c) 2004, 2005, 2006, 2007 Reyk Floeter <reyk@openbsd.org> - * Copyright (c) 2006, 2007 Nick Kossifidis <mickflemm@gmail.com> - * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com> + * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com> * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -20,13 +20,9 @@ */ #include "ath5k.h" -#include "base.h" #include "reg.h" - -/* - * MAC/PHY REGISTERS - */ - +#include "debug.h" +#include "base.h" /* * Mode-independent initial register writes @@ -65,10 +61,10 @@ static const struct ath5k_ini ar5210_ini[] = { { AR5K_TXCFG, AR5K_DMASIZE_128B }, { AR5K_RXCFG, AR5K_DMASIZE_128B }, { AR5K_CFG, AR5K_INIT_CFG }, - { AR5K_TOPS, AR5K_INIT_TOPS }, - { AR5K_RXNOFRM, AR5K_INIT_RXNOFRM }, - { AR5K_RPGTO, AR5K_INIT_RPGTO }, - { AR5K_TXNOFRM, AR5K_INIT_TXNOFRM }, + { AR5K_TOPS, 8 }, + { AR5K_RXNOFRM, 8 }, + { AR5K_RPGTO, 0 }, + { AR5K_TXNOFRM, 0 }, { AR5K_SFR, 0 }, { AR5K_MIBC, 0 }, { AR5K_MISC, 0 }, diff --git a/drivers/net/wireless/ath5k/pcu.c b/drivers/net/wireless/ath5k/pcu.c new file mode 100644 index 000000000000..5a896d1e2a2b --- /dev/null +++ b/drivers/net/wireless/ath5k/pcu.c @@ -0,0 +1,1002 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2007-2008 Matthew W. S. Bell <mentor@madwifi.org> + * Copyright (c) 2007-2008 Luis Rodriguez <mcgrof@winlab.rutgers.edu> + * Copyright (c) 2007-2008 Pavel Roskin <proski@gnu.org> + * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/*********************************\ +* Protocol Control Unit Functions * +\*********************************/ + +#include "ath5k.h" +#include "reg.h" +#include "debug.h" +#include "base.h" + +/*******************\ +* Generic functions * +\*******************/ + +/** + * ath5k_hw_set_opmode - Set PCU operating mode + * + * @ah: The &struct ath5k_hw + * + * Initialize PCU for the various operating modes (AP/STA etc) + * + * NOTE: ah->ah_op_mode must be set before calling this. + */ +int ath5k_hw_set_opmode(struct ath5k_hw *ah) +{ + u32 pcu_reg, beacon_reg, low_id, high_id; + + pcu_reg = 0; + beacon_reg = 0; + + ATH5K_TRACE(ah->ah_sc); + + switch (ah->ah_op_mode) { + case IEEE80211_IF_TYPE_IBSS: + pcu_reg |= AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_DESC_ANTENNA | + (ah->ah_version == AR5K_AR5210 ? + AR5K_STA_ID1_NO_PSPOLL : 0); + beacon_reg |= AR5K_BCR_ADHOC; + break; + + case IEEE80211_IF_TYPE_AP: + case IEEE80211_IF_TYPE_MESH_POINT: + pcu_reg |= AR5K_STA_ID1_AP | AR5K_STA_ID1_RTS_DEF_ANTENNA | + (ah->ah_version == AR5K_AR5210 ? + AR5K_STA_ID1_NO_PSPOLL : 0); + beacon_reg |= AR5K_BCR_AP; + break; + + case IEEE80211_IF_TYPE_STA: + pcu_reg |= AR5K_STA_ID1_DEFAULT_ANTENNA | + (ah->ah_version == AR5K_AR5210 ? + AR5K_STA_ID1_PWR_SV : 0); + case IEEE80211_IF_TYPE_MNTR: + pcu_reg |= AR5K_STA_ID1_DEFAULT_ANTENNA | + (ah->ah_version == AR5K_AR5210 ? + AR5K_STA_ID1_NO_PSPOLL : 0); + break; + + default: + return -EINVAL; + } + + /* + * Set PCU registers + */ + low_id = AR5K_LOW_ID(ah->ah_sta_id); + high_id = AR5K_HIGH_ID(ah->ah_sta_id); + ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0); + ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1); + + /* + * Set Beacon Control Register on 5210 + */ + if (ah->ah_version == AR5K_AR5210) + ath5k_hw_reg_write(ah, beacon_reg, AR5K_BCR); + + return 0; +} + +/** + * ath5k_hw_update - Update mib counters (mac layer statistics) + * + * @ah: The &struct ath5k_hw + * @stats: The &struct ieee80211_low_level_stats we use to track + * statistics on the driver + * + * Reads MIB counters from PCU and updates sw statistics. Must be + * called after a MIB interrupt. + */ +void ath5k_hw_update_mib_counters(struct ath5k_hw *ah, + struct ieee80211_low_level_stats *stats) +{ + ATH5K_TRACE(ah->ah_sc); + + /* Read-And-Clear */ + stats->dot11ACKFailureCount += ath5k_hw_reg_read(ah, AR5K_ACK_FAIL); + stats->dot11RTSFailureCount += ath5k_hw_reg_read(ah, AR5K_RTS_FAIL); + stats->dot11RTSSuccessCount += ath5k_hw_reg_read(ah, AR5K_RTS_OK); + stats->dot11FCSErrorCount += ath5k_hw_reg_read(ah, AR5K_FCS_FAIL); + + /* XXX: Should we use this to track beacon count ? + * -we read it anyway to clear the register */ + ath5k_hw_reg_read(ah, AR5K_BEACON_CNT); + + /* Reset profile count registers on 5212*/ + if (ah->ah_version == AR5K_AR5212) { + ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_TX); + ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RX); + ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RXCLR); + ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_CYCLE); + } +} + +/** + * ath5k_hw_set_ack_bitrate - set bitrate for ACKs + * + * @ah: The &struct ath5k_hw + * @high: Flag to determine if we want to use high transmition rate + * for ACKs or not + * + * If high flag is set, we tell hw to use a set of control rates based on + * the current transmition rate (check out control_rates array inside reset.c). + * If not hw just uses the lowest rate available for the current modulation + * scheme being used (1Mbit for CCK and 6Mbits for OFDM). + */ +void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high) +{ + if (ah->ah_version != AR5K_AR5212) + return; + else { + u32 val = AR5K_STA_ID1_BASE_RATE_11B | AR5K_STA_ID1_ACKCTS_6MB; + if (high) + AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, val); + else + AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, val); + } +} + + +/******************\ +* ACK/CTS Timeouts * +\******************/ + +/** + * ath5k_hw_het_ack_timeout - Get ACK timeout from PCU in usec + * + * @ah: The &struct ath5k_hw + */ +unsigned int ath5k_hw_get_ack_timeout(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + + return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah, + AR5K_TIME_OUT), AR5K_TIME_OUT_ACK), ah->ah_turbo); +} + +/** + * ath5k_hw_set_ack_timeout - Set ACK timeout on PCU + * + * @ah: The &struct ath5k_hw + * @timeout: Timeout in usec + */ +int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout) +{ + ATH5K_TRACE(ah->ah_sc); + if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_ACK), + ah->ah_turbo) <= timeout) + return -EINVAL; + + AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_ACK, + ath5k_hw_htoclock(timeout, ah->ah_turbo)); + + return 0; +} + +/** + * ath5k_hw_get_cts_timeout - Get CTS timeout from PCU in usec + * + * @ah: The &struct ath5k_hw + */ +unsigned int ath5k_hw_get_cts_timeout(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah, + AR5K_TIME_OUT), AR5K_TIME_OUT_CTS), ah->ah_turbo); +} + +/** + * ath5k_hw_set_cts_timeout - Set CTS timeout on PCU + * + * @ah: The &struct ath5k_hw + * @timeout: Timeout in usec + */ +int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout) +{ + ATH5K_TRACE(ah->ah_sc); + if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_CTS), + ah->ah_turbo) <= timeout) + return -EINVAL; + + AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_CTS, + ath5k_hw_htoclock(timeout, ah->ah_turbo)); + + return 0; +} + + +/****************\ +* BSSID handling * +\****************/ + +/** + * ath5k_hw_get_lladdr - Get station id + * + * @ah: The &struct ath5k_hw + * @mac: The card's mac address + * + * Initialize ah->ah_sta_id using the mac address provided + * (just a memcpy). + * + * TODO: Remove it once we merge ath5k_softc and ath5k_hw + */ +void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac) +{ + ATH5K_TRACE(ah->ah_sc); + memcpy(mac, ah->ah_sta_id, ETH_ALEN); +} + +/** + * ath5k_hw_set_lladdr - Set station id + * + * @ah: The &struct ath5k_hw + * @mac: The card's mac address + * + * Set station id on hw using the provided mac address + */ +int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac) +{ + u32 low_id, high_id; + + ATH5K_TRACE(ah->ah_sc); + /* Set new station ID */ + memcpy(ah->ah_sta_id, mac, ETH_ALEN); + + low_id = AR5K_LOW_ID(mac); + high_id = AR5K_HIGH_ID(mac); + + ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0); + ath5k_hw_reg_write(ah, high_id, AR5K_STA_ID1); + + return 0; +} + +/** + * ath5k_hw_set_associd - Set BSSID for association + * + * @ah: The &struct ath5k_hw + * @bssid: BSSID + * @assoc_id: Assoc id + * + * Sets the BSSID which trigers the "SME Join" operation + */ +void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id) +{ + u32 low_id, high_id; + u16 tim_offset = 0; + + /* + * Set simple BSSID mask on 5212 + */ + if (ah->ah_version == AR5K_AR5212) { + ath5k_hw_reg_write(ah, 0xffffffff, AR5K_BSS_IDM0); + ath5k_hw_reg_write(ah, 0xffffffff, AR5K_BSS_IDM1); + } + + /* + * Set BSSID which triggers the "SME Join" operation + */ + low_id = AR5K_LOW_ID(bssid); + high_id = AR5K_HIGH_ID(bssid); + ath5k_hw_reg_write(ah, low_id, AR5K_BSS_ID0); + ath5k_hw_reg_write(ah, high_id | ((assoc_id & 0x3fff) << + AR5K_BSS_ID1_AID_S), AR5K_BSS_ID1); + + if (assoc_id == 0) { + ath5k_hw_disable_pspoll(ah); + return; + } + + AR5K_REG_WRITE_BITS(ah, AR5K_BEACON, AR5K_BEACON_TIM, + tim_offset ? tim_offset + 4 : 0); + + ath5k_hw_enable_pspoll(ah, NULL, 0); +} + +/** + * ath5k_hw_set_bssid_mask - filter out bssids we listen + * + * @ah: the &struct ath5k_hw + * @mask: the bssid_mask, a u8 array of size ETH_ALEN + * + * BSSID masking is a method used by AR5212 and newer hardware to inform PCU + * which bits of the interface's MAC address should be looked at when trying + * to decide which packets to ACK. In station mode and AP mode with a single + * BSS every bit matters since we lock to only one BSS. In AP mode with + * multiple BSSes (virtual interfaces) not every bit matters because hw must + * accept frames for all BSSes and so we tweak some bits of our mac address + * in order to have multiple BSSes. + * + * NOTE: This is a simple filter and does *not* filter out all + * relevant frames. Some frames that are not for us might get ACKed from us + * by PCU because they just match the mask. + * + * When handling multiple BSSes you can get the BSSID mask by computing the + * set of ~ ( MAC XOR BSSID ) for all bssids we handle. + * + * When you do this you are essentially computing the common bits of all your + * BSSes. Later it is assumed the harware will "and" (&) the BSSID mask with + * the MAC address to obtain the relevant bits and compare the result with + * (frame's BSSID & mask) to see if they match. + */ +/* + * Simple example: on your card you have have two BSSes you have created with + * BSSID-01 and BSSID-02. Lets assume BSSID-01 will not use the MAC address. + * There is another BSSID-03 but you are not part of it. For simplicity's sake, + * assuming only 4 bits for a mac address and for BSSIDs you can then have: + * + * \ + * MAC: 0001 | + * BSSID-01: 0100 | --> Belongs to us + * BSSID-02: 1001 | + * / + * ------------------- + * BSSID-03: 0110 | --> External + * ------------------- + * + * Our bssid_mask would then be: + * + * On loop iteration for BSSID-01: + * ~(0001 ^ 0100) -> ~(0101) + * -> 1010 + * bssid_mask = 1010 + * + * On loop iteration for BSSID-02: + * bssid_mask &= ~(0001 ^ 1001) + * bssid_mask = (1010) & ~(0001 ^ 1001) + * bssid_mask = (1010) & ~(1001) + * bssid_mask = (1010) & (0110) + * bssid_mask = 0010 + * + * A bssid_mask of 0010 means "only pay attention to the second least + * significant bit". This is because its the only bit common + * amongst the MAC and all BSSIDs we support. To findout what the real + * common bit is we can simply "&" the bssid_mask now with any BSSID we have + * or our MAC address (we assume the hardware uses the MAC address). + * + * Now, suppose there's an incoming frame for BSSID-03: + * + * IFRAME-01: 0110 + * + * An easy eye-inspeciton of this already should tell you that this frame + * will not pass our check. This is beacuse the bssid_mask tells the + * hardware to only look at the second least significant bit and the + * common bit amongst the MAC and BSSIDs is 0, this frame has the 2nd LSB + * as 1, which does not match 0. + * + * So with IFRAME-01 we *assume* the hardware will do: + * + * allow = (IFRAME-01 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0; + * --> allow = (0110 & 0010) == (0010 & 0001) ? 1 : 0; + * --> allow = (0010) == 0000 ? 1 : 0; + * --> allow = 0 + * + * Lets now test a frame that should work: + * + * IFRAME-02: 0001 (we should allow) + * + * allow = (0001 & 1010) == 1010 + * + * allow = (IFRAME-02 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0; + * --> allow = (0001 & 0010) == (0010 & 0001) ? 1 :0; + * --> allow = (0010) == (0010) + * --> allow = 1 + * + * Other examples: + * + * IFRAME-03: 0100 --> allowed + * IFRAME-04: 1001 --> allowed + * IFRAME-05: 1101 --> allowed but its not for us!!! + * + */ +int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask) +{ + u32 low_id, high_id; + ATH5K_TRACE(ah->ah_sc); + + if (ah->ah_version == AR5K_AR5212) { + low_id = AR5K_LOW_ID(mask); + high_id = AR5K_HIGH_ID(mask); + + ath5k_hw_reg_write(ah, low_id, AR5K_BSS_IDM0); + ath5k_hw_reg_write(ah, high_id, AR5K_BSS_IDM1); + + return 0; + } + + return -EIO; +} + + +/************\ +* RX Control * +\************/ + +/** + * ath5k_hw_start_rx_pcu - Start RX engine + * + * @ah: The &struct ath5k_hw + * + * Starts RX engine on PCU so that hw can process RXed frames + * (ACK etc). + * + * NOTE: RX DMA should be already enabled using ath5k_hw_start_rx_dma + * TODO: Init ANI here + */ +void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX); +} + +/** + * at5k_hw_stop_rx_pcu - Stop RX engine + * + * @ah: The &struct ath5k_hw + * + * Stops RX engine on PCU + * + * TODO: Detach ANI here + */ +void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX); +} + +/* + * Set multicast filter + */ +void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1) +{ + ATH5K_TRACE(ah->ah_sc); + /* Set the multicat filter */ + ath5k_hw_reg_write(ah, filter0, AR5K_MCAST_FILTER0); + ath5k_hw_reg_write(ah, filter1, AR5K_MCAST_FILTER1); +} + +/* + * Set multicast filter by index + */ +int ath5k_hw_set_mcast_filter_idx(struct ath5k_hw *ah, u32 index) +{ + + ATH5K_TRACE(ah->ah_sc); + if (index >= 64) + return -EINVAL; + else if (index >= 32) + AR5K_REG_ENABLE_BITS(ah, AR5K_MCAST_FILTER1, + (1 << (index - 32))); + else + AR5K_REG_ENABLE_BITS(ah, AR5K_MCAST_FILTER0, (1 << index)); + + return 0; +} + +/* + * Clear Multicast filter by index + */ +int ath5k_hw_clear_mcast_filter_idx(struct ath5k_hw *ah, u32 index) +{ + + ATH5K_TRACE(ah->ah_sc); + if (index >= 64) + return -EINVAL; + else if (index >= 32) + AR5K_REG_DISABLE_BITS(ah, AR5K_MCAST_FILTER1, + (1 << (index - 32))); + else + AR5K_REG_DISABLE_BITS(ah, AR5K_MCAST_FILTER0, (1 << index)); + + return 0; +} + +/** + * ath5k_hw_get_rx_filter - Get current rx filter + * + * @ah: The &struct ath5k_hw + * + * Returns the RX filter by reading rx filter and + * phy error filter registers. RX filter is used + * to set the allowed frame types that PCU will accept + * and pass to the driver. For a list of frame types + * check out reg.h. + */ +u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah) +{ + u32 data, filter = 0; + + ATH5K_TRACE(ah->ah_sc); + filter = ath5k_hw_reg_read(ah, AR5K_RX_FILTER); + + /*Radar detection for 5212*/ + if (ah->ah_version == AR5K_AR5212) { + data = ath5k_hw_reg_read(ah, AR5K_PHY_ERR_FIL); + + if (data & AR5K_PHY_ERR_FIL_RADAR) + filter |= AR5K_RX_FILTER_RADARERR; + if (data & (AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK)) + filter |= AR5K_RX_FILTER_PHYERR; + } + + return filter; +} + +/** + * ath5k_hw_set_rx_filter - Set rx filter + * + * @ah: The &struct ath5k_hw + * @filter: RX filter mask (see reg.h) + * + * Sets RX filter register and also handles PHY error filter + * register on 5212 and newer chips so that we have proper PHY + * error reporting. + */ +void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter) +{ + u32 data = 0; + + ATH5K_TRACE(ah->ah_sc); + + /* Set PHY error filter register on 5212*/ + if (ah->ah_version == AR5K_AR5212) { + if (filter & AR5K_RX_FILTER_RADARERR) + data |= AR5K_PHY_ERR_FIL_RADAR; + if (filter & AR5K_RX_FILTER_PHYERR) + data |= AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK; + } + + /* + * The AR5210 uses promiscous mode to detect radar activity + */ + if (ah->ah_version == AR5K_AR5210 && + (filter & AR5K_RX_FILTER_RADARERR)) { + filter &= ~AR5K_RX_FILTER_RADARERR; + filter |= AR5K_RX_FILTER_PROM; + } + + /*Zero length DMA*/ + if (data) + AR5K_REG_ENABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA); + else + AR5K_REG_DISABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA); + + /*Write RX Filter register*/ + ath5k_hw_reg_write(ah, filter & 0xff, AR5K_RX_FILTER); + + /*Write PHY error filter register on 5212*/ + if (ah->ah_version == AR5K_AR5212) + ath5k_hw_reg_write(ah, data, AR5K_PHY_ERR_FIL); + +} + + +/****************\ +* Beacon control * +\****************/ + +/** + * ath5k_hw_get_tsf32 - Get a 32bit TSF + * + * @ah: The &struct ath5k_hw + * + * Returns lower 32 bits of current TSF + */ +u32 ath5k_hw_get_tsf32(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + return ath5k_hw_reg_read(ah, AR5K_TSF_L32); +} + +/** + * ath5k_hw_get_tsf64 - Get the full 64bit TSF + * + * @ah: The &struct ath5k_hw + * + * Returns the current TSF + */ +u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah) +{ + u64 tsf = ath5k_hw_reg_read(ah, AR5K_TSF_U32); + ATH5K_TRACE(ah->ah_sc); + + return ath5k_hw_reg_read(ah, AR5K_TSF_L32) | (tsf << 32); +} + +/** + * ath5k_hw_reset_tsf - Force a TSF reset + * + * @ah: The &struct ath5k_hw + * + * Forces a TSF reset on PCU + */ +void ath5k_hw_reset_tsf(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + AR5K_REG_ENABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_RESET_TSF); +} + +/* + * Initialize beacon timers + */ +void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval) +{ + u32 timer1, timer2, timer3; + + ATH5K_TRACE(ah->ah_sc); + /* + * Set the additional timers by mode + */ + switch (ah->ah_op_mode) { + case IEEE80211_IF_TYPE_STA: + if (ah->ah_version == AR5K_AR5210) { + timer1 = 0xffffffff; + timer2 = 0xffffffff; + } else { + timer1 = 0x0000ffff; + timer2 = 0x0007ffff; + } + break; + + default: + timer1 = (next_beacon - AR5K_TUNE_DMA_BEACON_RESP) << 3; + timer2 = (next_beacon - AR5K_TUNE_SW_BEACON_RESP) << 3; + } + + timer3 = next_beacon + (ah->ah_atim_window ? ah->ah_atim_window : 1); + + /* + * Set the beacon register and enable all timers. + * (next beacon, DMA beacon, software beacon, ATIM window time) + */ + ath5k_hw_reg_write(ah, next_beacon, AR5K_TIMER0); + ath5k_hw_reg_write(ah, timer1, AR5K_TIMER1); + ath5k_hw_reg_write(ah, timer2, AR5K_TIMER2); + ath5k_hw_reg_write(ah, timer3, AR5K_TIMER3); + + ath5k_hw_reg_write(ah, interval & (AR5K_BEACON_PERIOD | + AR5K_BEACON_RESET_TSF | AR5K_BEACON_ENABLE), + AR5K_BEACON); +} + +#if 0 +/* + * Set beacon timers + */ +int ath5k_hw_set_beacon_timers(struct ath5k_hw *ah, + const struct ath5k_beacon_state *state) +{ + u32 cfp_period, next_cfp, dtim, interval, next_beacon; + + /* + * TODO: should be changed through *state + * review struct ath5k_beacon_state struct + * + * XXX: These are used for cfp period bellow, are they + * ok ? Is it O.K. for tsf here to be 0 or should we use + * get_tsf ? + */ + u32 dtim_count = 0; /* XXX */ + u32 cfp_count = 0; /* XXX */ + u32 tsf = 0; /* XXX */ + + ATH5K_TRACE(ah->ah_sc); + /* Return on an invalid beacon state */ + if (state->bs_interval < 1) + return -EINVAL; + + interval = state->bs_interval; + dtim = state->bs_dtim_period; + + /* + * PCF support? + */ + if (state->bs_cfp_period > 0) { + /* + * Enable PCF mode and set the CFP + * (Contention Free Period) and timer registers + */ + cfp_period = state->bs_cfp_period * state->bs_dtim_period * + state->bs_interval; + next_cfp = (cfp_count * state->bs_dtim_period + dtim_count) * + state->bs_interval; + + AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, + AR5K_STA_ID1_DEFAULT_ANTENNA | + AR5K_STA_ID1_PCF); + ath5k_hw_reg_write(ah, cfp_period, AR5K_CFP_PERIOD); + ath5k_hw_reg_write(ah, state->bs_cfp_max_duration, + AR5K_CFP_DUR); + ath5k_hw_reg_write(ah, (tsf + (next_cfp == 0 ? cfp_period : + next_cfp)) << 3, AR5K_TIMER2); + } else { + /* Disable PCF mode */ + AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, + AR5K_STA_ID1_DEFAULT_ANTENNA | + AR5K_STA_ID1_PCF); + } + + /* + * Enable the beacon timer register + */ + ath5k_hw_reg_write(ah, state->bs_next_beacon, AR5K_TIMER0); + + /* + * Start the beacon timers + */ + ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, AR5K_BEACON) & + ~(AR5K_BEACON_PERIOD | AR5K_BEACON_TIM)) | + AR5K_REG_SM(state->bs_tim_offset ? state->bs_tim_offset + 4 : 0, + AR5K_BEACON_TIM) | AR5K_REG_SM(state->bs_interval, + AR5K_BEACON_PERIOD), AR5K_BEACON); + + /* + * Write new beacon miss threshold, if it appears to be valid + * XXX: Figure out right values for min <= bs_bmiss_threshold <= max + * and return if its not in range. We can test this by reading value and + * setting value to a largest value and seeing which values register. + */ + + AR5K_REG_WRITE_BITS(ah, AR5K_RSSI_THR, AR5K_RSSI_THR_BMISS, + state->bs_bmiss_threshold); + + /* + * Set sleep control register + * XXX: Didn't find this in 5210 code but since this register + * exists also in ar5k's 5210 headers i leave it as common code. + */ + AR5K_REG_WRITE_BITS(ah, AR5K_SLEEP_CTL, AR5K_SLEEP_CTL_SLDUR, + (state->bs_sleep_duration - 3) << 3); + + /* + * Set enhanced sleep registers on 5212 + */ + if (ah->ah_version == AR5K_AR5212) { + if (state->bs_sleep_duration > state->bs_interval && + roundup(state->bs_sleep_duration, interval) == + state->bs_sleep_duration) + interval = state->bs_sleep_duration; + + if (state->bs_sleep_duration > dtim && (dtim == 0 || + roundup(state->bs_sleep_duration, dtim) == + state->bs_sleep_duration)) + dtim = state->bs_sleep_duration; + + if (interval > dtim) + return -EINVAL; + + next_beacon = interval == dtim ? state->bs_next_dtim : + state->bs_next_beacon; + + ath5k_hw_reg_write(ah, + AR5K_REG_SM((state->bs_next_dtim - 3) << 3, + AR5K_SLEEP0_NEXT_DTIM) | + AR5K_REG_SM(10, AR5K_SLEEP0_CABTO) | + AR5K_SLEEP0_ENH_SLEEP_EN | + AR5K_SLEEP0_ASSUME_DTIM, AR5K_SLEEP0); + + ath5k_hw_reg_write(ah, AR5K_REG_SM((next_beacon - 3) << 3, + AR5K_SLEEP1_NEXT_TIM) | + AR5K_REG_SM(10, AR5K_SLEEP1_BEACON_TO), AR5K_SLEEP1); + + ath5k_hw_reg_write(ah, + AR5K_REG_SM(interval, AR5K_SLEEP2_TIM_PER) | + AR5K_REG_SM(dtim, AR5K_SLEEP2_DTIM_PER), AR5K_SLEEP2); + } + + return 0; +} + +/* + * Reset beacon timers + */ +void ath5k_hw_reset_beacon(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + /* + * Disable beacon timer + */ + ath5k_hw_reg_write(ah, 0, AR5K_TIMER0); + + /* + * Disable some beacon register values + */ + AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, + AR5K_STA_ID1_DEFAULT_ANTENNA | AR5K_STA_ID1_PCF); + ath5k_hw_reg_write(ah, AR5K_BEACON_PERIOD, AR5K_BEACON); +} + +/* + * Wait for beacon queue to finish + */ +int ath5k_hw_beaconq_finish(struct ath5k_hw *ah, unsigned long phys_addr) +{ + unsigned int i; + int ret; + + ATH5K_TRACE(ah->ah_sc); + + /* 5210 doesn't have QCU*/ + if (ah->ah_version == AR5K_AR5210) { + /* + * Wait for beaconn queue to finish by checking + * Control Register and Beacon Status Register. + */ + for (i = AR5K_TUNE_BEACON_INTERVAL / 2; i > 0; i--) { + if (!(ath5k_hw_reg_read(ah, AR5K_BSR) & AR5K_BSR_TXQ1F) + || + !(ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_BSR_TXQ1F)) + break; + udelay(10); + } + + /* Timeout... */ + if (i <= 0) { + /* + * Re-schedule the beacon queue + */ + ath5k_hw_reg_write(ah, phys_addr, AR5K_NOQCU_TXDP1); + ath5k_hw_reg_write(ah, AR5K_BCR_TQ1V | AR5K_BCR_BDMAE, + AR5K_BCR); + + return -EIO; + } + ret = 0; + } else { + /*5211/5212*/ + ret = ath5k_hw_register_timeout(ah, + AR5K_QUEUE_STATUS(AR5K_TX_QUEUE_ID_BEACON), + AR5K_QCU_STS_FRMPENDCNT, 0, false); + + if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, AR5K_TX_QUEUE_ID_BEACON)) + return -EIO; + } + + return ret; +} +#endif + + +/*********************\ +* Key table functions * +\*********************/ + +/* + * Reset a key entry on the table + */ +int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry) +{ + unsigned int i; + + ATH5K_TRACE(ah->ah_sc); + AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE); + + for (i = 0; i < AR5K_KEYCACHE_SIZE; i++) + ath5k_hw_reg_write(ah, 0, AR5K_KEYTABLE_OFF(entry, i)); + + /* + * Set NULL encryption on AR5212+ + * + * Note: AR5K_KEYTABLE_TYPE -> AR5K_KEYTABLE_OFF(entry, 5) + * AR5K_KEYTABLE_TYPE_NULL -> 0x00000007 + * + * Note2: Windows driver (ndiswrapper) sets this to + * 0x00000714 instead of 0x00000007 + */ + if (ah->ah_version > AR5K_AR5211) + ath5k_hw_reg_write(ah, AR5K_KEYTABLE_TYPE_NULL, + AR5K_KEYTABLE_TYPE(entry)); + + return 0; +} + +/* + * Check if a table entry is valid + */ +int ath5k_hw_is_key_valid(struct ath5k_hw *ah, u16 entry) +{ + ATH5K_TRACE(ah->ah_sc); + AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE); + + /* Check the validation flag at the end of the entry */ + return ath5k_hw_reg_read(ah, AR5K_KEYTABLE_MAC1(entry)) & + AR5K_KEYTABLE_VALID; +} + +/* + * Set a key entry on the table + */ +int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry, + const struct ieee80211_key_conf *key, const u8 *mac) +{ + unsigned int i; + __le32 key_v[5] = {}; + u32 keytype; + + ATH5K_TRACE(ah->ah_sc); + + /* key->keylen comes in from mac80211 in bytes */ + + if (key->keylen > AR5K_KEYTABLE_SIZE / 8) + return -EOPNOTSUPP; + + switch (key->keylen) { + /* WEP 40-bit = 40-bit entered key + 24 bit IV = 64-bit */ + case 40 / 8: + memcpy(&key_v[0], key->key, 5); + keytype = AR5K_KEYTABLE_TYPE_40; + break; + + /* WEP 104-bit = 104-bit entered key + 24-bit IV = 128-bit */ + case 104 / 8: + memcpy(&key_v[0], &key->key[0], 6); + memcpy(&key_v[2], &key->key[6], 6); + memcpy(&key_v[4], &key->key[12], 1); + keytype = AR5K_KEYTABLE_TYPE_104; + break; + /* WEP 128-bit = 128-bit entered key + 24 bit IV = 152-bit */ + case 128 / 8: + memcpy(&key_v[0], &key->key[0], 6); + memcpy(&key_v[2], &key->key[6], 6); + memcpy(&key_v[4], &key->key[12], 4); + keytype = AR5K_KEYTABLE_TYPE_128; + break; + + default: + return -EINVAL; /* shouldn't happen */ + } + + for (i = 0; i < ARRAY_SIZE(key_v); i++) + ath5k_hw_reg_write(ah, le32_to_cpu(key_v[i]), + AR5K_KEYTABLE_OFF(entry, i)); + + ath5k_hw_reg_write(ah, keytype, AR5K_KEYTABLE_TYPE(entry)); + + return ath5k_hw_set_key_lladdr(ah, entry, mac); +} + +int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac) +{ + u32 low_id, high_id; + + ATH5K_TRACE(ah->ah_sc); + /* Invalid entry (key table overflow) */ + AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE); + + /* MAC may be NULL if it's a broadcast key. In this case no need to + * to compute AR5K_LOW_ID and AR5K_HIGH_ID as we already know it. */ + if (unlikely(mac == NULL)) { + low_id = 0xffffffff; + high_id = 0xffff | AR5K_KEYTABLE_VALID; + } else { + low_id = AR5K_LOW_ID(mac); + high_id = AR5K_HIGH_ID(mac) | AR5K_KEYTABLE_VALID; + } + + ath5k_hw_reg_write(ah, low_id, AR5K_KEYTABLE_MAC0(entry)); + ath5k_hw_reg_write(ah, high_id, AR5K_KEYTABLE_MAC1(entry)); + + return 0; +} + diff --git a/drivers/net/wireless/ath5k/phy.c b/drivers/net/wireless/ath5k/phy.c index fa0d47faf574..1ea8ed962d26 100644 --- a/drivers/net/wireless/ath5k/phy.c +++ b/drivers/net/wireless/ath5k/phy.c @@ -1,9 +1,9 @@ /* * PHY functions * - * Copyright (c) 2004, 2005, 2006, 2007 Reyk Floeter <reyk@openbsd.org> - * Copyright (c) 2006, 2007 Nick Kossifidis <mickflemm@gmail.com> - * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com> + * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com> * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -19,6 +19,8 @@ * */ +#define _ATH5K_PHY + #include <linux/delay.h> #include "ath5k.h" @@ -2501,3 +2503,5 @@ int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, unsigned int power) return ath5k_hw_txpower(ah, channel, power); } + +#undef _ATH5K_PHY diff --git a/drivers/net/wireless/ath5k/qcu.c b/drivers/net/wireless/ath5k/qcu.c new file mode 100644 index 000000000000..2e20f7816ca7 --- /dev/null +++ b/drivers/net/wireless/ath5k/qcu.c @@ -0,0 +1,488 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/********************************************\ +Queue Control Unit, DFS Control Unit Functions +\********************************************/ + +#include "ath5k.h" +#include "reg.h" +#include "debug.h" +#include "base.h" + +/* + * Get properties for a transmit queue + */ +int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, + struct ath5k_txq_info *queue_info) +{ + ATH5K_TRACE(ah->ah_sc); + memcpy(queue_info, &ah->ah_txq[queue], sizeof(struct ath5k_txq_info)); + return 0; +} + +/* + * Set properties for a transmit queue + */ +int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue, + const struct ath5k_txq_info *queue_info) +{ + ATH5K_TRACE(ah->ah_sc); + AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); + + if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) + return -EIO; + + memcpy(&ah->ah_txq[queue], queue_info, sizeof(struct ath5k_txq_info)); + + /*XXX: Is this supported on 5210 ?*/ + if ((queue_info->tqi_type == AR5K_TX_QUEUE_DATA && + ((queue_info->tqi_subtype == AR5K_WME_AC_VI) || + (queue_info->tqi_subtype == AR5K_WME_AC_VO))) || + queue_info->tqi_type == AR5K_TX_QUEUE_UAPSD) + ah->ah_txq[queue].tqi_flags |= AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS; + + return 0; +} + +/* + * Initialize a transmit queue + */ +int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type, + struct ath5k_txq_info *queue_info) +{ + unsigned int queue; + int ret; + + ATH5K_TRACE(ah->ah_sc); + + /* + * Get queue by type + */ + /*5210 only has 2 queues*/ + if (ah->ah_version == AR5K_AR5210) { + switch (queue_type) { + case AR5K_TX_QUEUE_DATA: + queue = AR5K_TX_QUEUE_ID_NOQCU_DATA; + break; + case AR5K_TX_QUEUE_BEACON: + case AR5K_TX_QUEUE_CAB: + queue = AR5K_TX_QUEUE_ID_NOQCU_BEACON; + break; + default: + return -EINVAL; + } + } else { + switch (queue_type) { + case AR5K_TX_QUEUE_DATA: + for (queue = AR5K_TX_QUEUE_ID_DATA_MIN; + ah->ah_txq[queue].tqi_type != + AR5K_TX_QUEUE_INACTIVE; queue++) { + + if (queue > AR5K_TX_QUEUE_ID_DATA_MAX) + return -EINVAL; + } + break; + case AR5K_TX_QUEUE_UAPSD: + queue = AR5K_TX_QUEUE_ID_UAPSD; + break; + case AR5K_TX_QUEUE_BEACON: + queue = AR5K_TX_QUEUE_ID_BEACON; + break; + case AR5K_TX_QUEUE_CAB: + queue = AR5K_TX_QUEUE_ID_CAB; + break; + case AR5K_TX_QUEUE_XR_DATA: + if (ah->ah_version != AR5K_AR5212) + ATH5K_ERR(ah->ah_sc, + "XR data queues only supported in" + " 5212!\n"); + queue = AR5K_TX_QUEUE_ID_XR_DATA; + break; + default: + return -EINVAL; + } + } + + /* + * Setup internal queue structure + */ + memset(&ah->ah_txq[queue], 0, sizeof(struct ath5k_txq_info)); + ah->ah_txq[queue].tqi_type = queue_type; + + if (queue_info != NULL) { + queue_info->tqi_type = queue_type; + ret = ath5k_hw_set_tx_queueprops(ah, queue, queue_info); + if (ret) + return ret; + } + + /* + * We use ah_txq_status to hold a temp value for + * the Secondary interrupt mask registers on 5211+ + * check out ath5k_hw_reset_tx_queue + */ + AR5K_Q_ENABLE_BITS(ah->ah_txq_status, queue); + + return queue; +} + +/* + * Get number of pending frames + * for a specific queue [5211+] + */ +u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue) +{ + ATH5K_TRACE(ah->ah_sc); + AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); + + /* Return if queue is declared inactive */ + if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE) + return false; + + /* XXX: How about AR5K_CFG_TXCNT ? */ + if (ah->ah_version == AR5K_AR5210) + return false; + + return AR5K_QUEUE_STATUS(queue) & AR5K_QCU_STS_FRMPENDCNT; +} + +/* + * Set a transmit queue inactive + */ +void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue) +{ + ATH5K_TRACE(ah->ah_sc); + if (WARN_ON(queue >= ah->ah_capabilities.cap_queues.q_tx_num)) + return; + + /* This queue will be skipped in further operations */ + ah->ah_txq[queue].tqi_type = AR5K_TX_QUEUE_INACTIVE; + /*For SIMR setup*/ + AR5K_Q_DISABLE_BITS(ah->ah_txq_status, queue); +} + +/* + * Set DFS properties for a transmit queue on DCU + */ +int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue) +{ + u32 cw_min, cw_max, retry_lg, retry_sh; + struct ath5k_txq_info *tq = &ah->ah_txq[queue]; + + ATH5K_TRACE(ah->ah_sc); + AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num); + + tq = &ah->ah_txq[queue]; + + if (tq->tqi_type == AR5K_TX_QUEUE_INACTIVE) + return 0; + + if (ah->ah_version == AR5K_AR5210) { + /* Only handle data queues, others will be ignored */ + if (tq->tqi_type != AR5K_TX_QUEUE_DATA) + return 0; + + /* Set Slot time */ + ath5k_hw_reg_write(ah, ah->ah_turbo ? + AR5K_INIT_SLOT_TIME_TURBO : AR5K_INIT_SLOT_TIME, + AR5K_SLOT_TIME); + /* Set ACK_CTS timeout */ + ath5k_hw_reg_write(ah, ah->ah_turbo ? + AR5K_INIT_ACK_CTS_TIMEOUT_TURBO : + AR5K_INIT_ACK_CTS_TIMEOUT, AR5K_SLOT_TIME); + /* Set Transmit Latency */ + ath5k_hw_reg_write(ah, ah->ah_turbo ? + AR5K_INIT_TRANSMIT_LATENCY_TURBO : + AR5K_INIT_TRANSMIT_LATENCY, AR5K_USEC_5210); + + /* Set IFS0 */ + if (ah->ah_turbo) { + ath5k_hw_reg_write(ah, ((AR5K_INIT_SIFS_TURBO + + (ah->ah_aifs + tq->tqi_aifs) * + AR5K_INIT_SLOT_TIME_TURBO) << + AR5K_IFS0_DIFS_S) | AR5K_INIT_SIFS_TURBO, + AR5K_IFS0); + } else { + ath5k_hw_reg_write(ah, ((AR5K_INIT_SIFS + + (ah->ah_aifs + tq->tqi_aifs) * + AR5K_INIT_SLOT_TIME) << AR5K_IFS0_DIFS_S) | + AR5K_INIT_SIFS, AR5K_IFS0); + } + + /* Set IFS1 */ + ath5k_hw_reg_write(ah, ah->ah_turbo ? + AR5K_INIT_PROTO_TIME_CNTRL_TURBO : + AR5K_INIT_PROTO_TIME_CNTRL, AR5K_IFS1); + /* Set AR5K_PHY_SETTLING */ + ath5k_hw_reg_write(ah, ah->ah_turbo ? + (ath5k_hw_reg_read(ah, AR5K_PHY_SETTLING) & ~0x7F) + | 0x38 : + (ath5k_hw_reg_read(ah, AR5K_PHY_SETTLING) & ~0x7F) + | 0x1C, + AR5K_PHY_SETTLING); + /* Set Frame Control Register */ + ath5k_hw_reg_write(ah, ah->ah_turbo ? + (AR5K_PHY_FRAME_CTL_INI | AR5K_PHY_TURBO_MODE | + AR5K_PHY_TURBO_SHORT | 0x2020) : + (AR5K_PHY_FRAME_CTL_INI | 0x1020), + AR5K_PHY_FRAME_CTL_5210); + } + + /* + * Calculate cwmin/max by channel mode + */ + cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN; + cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX; + ah->ah_aifs = AR5K_TUNE_AIFS; + /*XR is only supported on 5212*/ + if (IS_CHAN_XR(ah->ah_current_channel) && + ah->ah_version == AR5K_AR5212) { + cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN_XR; + cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX_XR; + ah->ah_aifs = AR5K_TUNE_AIFS_XR; + /*B mode is not supported on 5210*/ + } else if (IS_CHAN_B(ah->ah_current_channel) && + ah->ah_version != AR5K_AR5210) { + cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN_11B; + cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX_11B; + ah->ah_aifs = AR5K_TUNE_AIFS_11B; + } + + cw_min = 1; + while (cw_min < ah->ah_cw_min) + cw_min = (cw_min << 1) | 1; + + cw_min = tq->tqi_cw_min < 0 ? (cw_min >> (-tq->tqi_cw_min)) : + ((cw_min << tq->tqi_cw_min) + (1 << tq->tqi_cw_min) - 1); + cw_max = tq->tqi_cw_max < 0 ? (cw_max >> (-tq->tqi_cw_max)) : + ((cw_max << tq->tqi_cw_max) + (1 << tq->tqi_cw_max) - 1); + + /* + * Calculate and set retry limits + */ + if (ah->ah_software_retry) { + /* XXX Need to test this */ + retry_lg = ah->ah_limit_tx_retries; + retry_sh = retry_lg = retry_lg > AR5K_DCU_RETRY_LMT_SH_RETRY ? + AR5K_DCU_RETRY_LMT_SH_RETRY : retry_lg; + } else { + retry_lg = AR5K_INIT_LG_RETRY; + retry_sh = AR5K_INIT_SH_RETRY; + } + + /*No QCU/DCU [5210]*/ + if (ah->ah_version == AR5K_AR5210) { + ath5k_hw_reg_write(ah, + (cw_min << AR5K_NODCU_RETRY_LMT_CW_MIN_S) + | AR5K_REG_SM(AR5K_INIT_SLG_RETRY, + AR5K_NODCU_RETRY_LMT_SLG_RETRY) + | AR5K_REG_SM(AR5K_INIT_SSH_RETRY, + AR5K_NODCU_RETRY_LMT_SSH_RETRY) + | AR5K_REG_SM(retry_lg, AR5K_NODCU_RETRY_LMT_LG_RETRY) + | AR5K_REG_SM(retry_sh, AR5K_NODCU_RETRY_LMT_SH_RETRY), + AR5K_NODCU_RETRY_LMT); + } else { + /*QCU/DCU [5211+]*/ + ath5k_hw_reg_write(ah, + AR5K_REG_SM(AR5K_INIT_SLG_RETRY, + AR5K_DCU_RETRY_LMT_SLG_RETRY) | + AR5K_REG_SM(AR5K_INIT_SSH_RETRY, + AR5K_DCU_RETRY_LMT_SSH_RETRY) | + AR5K_REG_SM(retry_lg, AR5K_DCU_RETRY_LMT_LG_RETRY) | + AR5K_REG_SM(retry_sh, AR5K_DCU_RETRY_LMT_SH_RETRY), + AR5K_QUEUE_DFS_RETRY_LIMIT(queue)); + + /*===Rest is also for QCU/DCU only [5211+]===*/ + + /* + * Set initial content window (cw_min/cw_max) + * and arbitrated interframe space (aifs)... + */ + ath5k_hw_reg_write(ah, + AR5K_REG_SM(cw_min, AR5K_DCU_LCL_IFS_CW_MIN) | + AR5K_REG_SM(cw_max, AR5K_DCU_LCL_IFS_CW_MAX) | + AR5K_REG_SM(ah->ah_aifs + tq->tqi_aifs, + AR5K_DCU_LCL_IFS_AIFS), + AR5K_QUEUE_DFS_LOCAL_IFS(queue)); + + /* + * Set misc registers + */ + ath5k_hw_reg_write(ah, AR5K_QCU_MISC_DCU_EARLY, + AR5K_QUEUE_MISC(queue)); + + if (tq->tqi_cbr_period) { + ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_cbr_period, + AR5K_QCU_CBRCFG_INTVAL) | + AR5K_REG_SM(tq->tqi_cbr_overflow_limit, + AR5K_QCU_CBRCFG_ORN_THRES), + AR5K_QUEUE_CBRCFG(queue)); + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), + AR5K_QCU_MISC_FRSHED_CBR); + if (tq->tqi_cbr_overflow_limit) + AR5K_REG_ENABLE_BITS(ah, + AR5K_QUEUE_MISC(queue), + AR5K_QCU_MISC_CBR_THRES_ENABLE); + } + + if (tq->tqi_ready_time) + ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_ready_time, + AR5K_QCU_RDYTIMECFG_INTVAL) | + AR5K_QCU_RDYTIMECFG_ENABLE, + AR5K_QUEUE_RDYTIMECFG(queue)); + + if (tq->tqi_burst_time) { + ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_burst_time, + AR5K_DCU_CHAN_TIME_DUR) | + AR5K_DCU_CHAN_TIME_ENABLE, + AR5K_QUEUE_DFS_CHANNEL_TIME(queue)); + + if (tq->tqi_flags + & AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE) + AR5K_REG_ENABLE_BITS(ah, + AR5K_QUEUE_MISC(queue), + AR5K_QCU_MISC_RDY_VEOL_POLICY); + } + + if (tq->tqi_flags & AR5K_TXQ_FLAG_BACKOFF_DISABLE) + ath5k_hw_reg_write(ah, AR5K_DCU_MISC_POST_FR_BKOFF_DIS, + AR5K_QUEUE_DFS_MISC(queue)); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE) + ath5k_hw_reg_write(ah, AR5K_DCU_MISC_BACKOFF_FRAG, + AR5K_QUEUE_DFS_MISC(queue)); + + /* + * Set registers by queue type + */ + switch (tq->tqi_type) { + case AR5K_TX_QUEUE_BEACON: + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), + AR5K_QCU_MISC_FRSHED_DBA_GT | + AR5K_QCU_MISC_CBREXP_BCN | + AR5K_QCU_MISC_BCN_ENABLE); + + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue), + (AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL << + AR5K_DCU_MISC_ARBLOCK_CTL_S) | + AR5K_DCU_MISC_POST_FR_BKOFF_DIS | + AR5K_DCU_MISC_BCN_ENABLE); + + ath5k_hw_reg_write(ah, ((AR5K_TUNE_BEACON_INTERVAL - + (AR5K_TUNE_SW_BEACON_RESP - + AR5K_TUNE_DMA_BEACON_RESP) - + AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF) * 1024) | + AR5K_QCU_RDYTIMECFG_ENABLE, + AR5K_QUEUE_RDYTIMECFG(queue)); + break; + + case AR5K_TX_QUEUE_CAB: + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), + AR5K_QCU_MISC_FRSHED_DBA_GT | + AR5K_QCU_MISC_CBREXP | + AR5K_QCU_MISC_CBREXP_BCN); + + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue), + (AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL << + AR5K_DCU_MISC_ARBLOCK_CTL_S)); + break; + + case AR5K_TX_QUEUE_UAPSD: + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), + AR5K_QCU_MISC_CBREXP); + break; + + case AR5K_TX_QUEUE_DATA: + default: + break; + } + + /* + * Enable interrupts for this tx queue + * in the secondary interrupt mask registers + */ + if (tq->tqi_flags & AR5K_TXQ_FLAG_TXOKINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txok, queue); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_TXERRINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txerr, queue); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_TXURNINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txurn, queue); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_TXDESCINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txdesc, queue); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_TXEOLINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txeol, queue); + + + /* Update secondary interrupt mask registers */ + ah->ah_txq_imr_txok &= ah->ah_txq_status; + ah->ah_txq_imr_txerr &= ah->ah_txq_status; + ah->ah_txq_imr_txurn &= ah->ah_txq_status; + ah->ah_txq_imr_txdesc &= ah->ah_txq_status; + ah->ah_txq_imr_txeol &= ah->ah_txq_status; + + ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txok, + AR5K_SIMR0_QCU_TXOK) | + AR5K_REG_SM(ah->ah_txq_imr_txdesc, + AR5K_SIMR0_QCU_TXDESC), AR5K_SIMR0); + ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txerr, + AR5K_SIMR1_QCU_TXERR) | + AR5K_REG_SM(ah->ah_txq_imr_txeol, + AR5K_SIMR1_QCU_TXEOL), AR5K_SIMR1); + ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txurn, + AR5K_SIMR2_QCU_TXURN), AR5K_SIMR2); + } + + return 0; +} + +/* + * Get slot time from DCU + */ +unsigned int ath5k_hw_get_slot_time(struct ath5k_hw *ah) +{ + ATH5K_TRACE(ah->ah_sc); + if (ah->ah_version == AR5K_AR5210) + return ath5k_hw_clocktoh(ath5k_hw_reg_read(ah, + AR5K_SLOT_TIME) & 0xffff, ah->ah_turbo); + else + return ath5k_hw_reg_read(ah, AR5K_DCU_GBL_IFS_SLOT) & 0xffff; +} + +/* + * Set slot time on DCU + */ +int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time) +{ + ATH5K_TRACE(ah->ah_sc); + if (slot_time < AR5K_SLOT_TIME_9 || slot_time > AR5K_SLOT_TIME_MAX) + return -EINVAL; + + if (ah->ah_version == AR5K_AR5210) + ath5k_hw_reg_write(ah, ath5k_hw_htoclock(slot_time, + ah->ah_turbo), AR5K_SLOT_TIME); + else + ath5k_hw_reg_write(ah, slot_time, AR5K_DCU_GBL_IFS_SLOT); + + return 0; +} + diff --git a/drivers/net/wireless/ath5k/reg.h b/drivers/net/wireless/ath5k/reg.h index 7562bf173d3e..a98832364448 100644 --- a/drivers/net/wireless/ath5k/reg.h +++ b/drivers/net/wireless/ath5k/reg.h @@ -1,7 +1,7 @@ /* - * Copyright (c) 2007 Nick Kossifidis <mickflemm@gmail.com> - * Copyright (c) 2004, 2005, 2006, 2007 Reyk Floeter <reyk@openbsd.org> - * Copyright (c) 2007 Michael Taylor <mike.taylor@apprion.com> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2007-2008 Michael Taylor <mike.taylor@apprion.com> * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -977,98 +977,6 @@ #define AR5K_EEPROM_BASE 0x6000 /* - * Common ar5xxx EEPROM data offsets (set these on AR5K_EEPROM_BASE) - */ -#define AR5K_EEPROM_MAGIC 0x003d /* EEPROM Magic number */ -#define AR5K_EEPROM_MAGIC_VALUE 0x5aa5 /* Default - found on EEPROM */ -#define AR5K_EEPROM_MAGIC_5212 0x0000145c /* 5212 */ -#define AR5K_EEPROM_MAGIC_5211 0x0000145b /* 5211 */ -#define AR5K_EEPROM_MAGIC_5210 0x0000145a /* 5210 */ - -#define AR5K_EEPROM_PROTECT 0x003f /* EEPROM protect status */ -#define AR5K_EEPROM_PROTECT_RD_0_31 0x0001 /* Read protection bit for offsets 0x0 - 0x1f */ -#define AR5K_EEPROM_PROTECT_WR_0_31 0x0002 /* Write protection bit for offsets 0x0 - 0x1f */ -#define AR5K_EEPROM_PROTECT_RD_32_63 0x0004 /* 0x20 - 0x3f */ -#define AR5K_EEPROM_PROTECT_WR_32_63 0x0008 -#define AR5K_EEPROM_PROTECT_RD_64_127 0x0010 /* 0x40 - 0x7f */ -#define AR5K_EEPROM_PROTECT_WR_64_127 0x0020 -#define AR5K_EEPROM_PROTECT_RD_128_191 0x0040 /* 0x80 - 0xbf (regdom) */ -#define AR5K_EEPROM_PROTECT_WR_128_191 0x0080 -#define AR5K_EEPROM_PROTECT_RD_192_207 0x0100 /* 0xc0 - 0xcf */ -#define AR5K_EEPROM_PROTECT_WR_192_207 0x0200 -#define AR5K_EEPROM_PROTECT_RD_208_223 0x0400 /* 0xd0 - 0xdf */ -#define AR5K_EEPROM_PROTECT_WR_208_223 0x0800 -#define AR5K_EEPROM_PROTECT_RD_224_239 0x1000 /* 0xe0 - 0xef */ -#define AR5K_EEPROM_PROTECT_WR_224_239 0x2000 -#define AR5K_EEPROM_PROTECT_RD_240_255 0x4000 /* 0xf0 - 0xff */ -#define AR5K_EEPROM_PROTECT_WR_240_255 0x8000 -#define AR5K_EEPROM_REG_DOMAIN 0x00bf /* EEPROM regdom */ -#define AR5K_EEPROM_INFO_BASE 0x00c0 /* EEPROM header */ -#define AR5K_EEPROM_INFO_MAX (0x400 - AR5K_EEPROM_INFO_BASE) -#define AR5K_EEPROM_INFO_CKSUM 0xffff -#define AR5K_EEPROM_INFO(_n) (AR5K_EEPROM_INFO_BASE + (_n)) - -#define AR5K_EEPROM_VERSION AR5K_EEPROM_INFO(1) /* EEPROM Version */ -#define AR5K_EEPROM_VERSION_3_0 0x3000 /* No idea what's going on before this version */ -#define AR5K_EEPROM_VERSION_3_1 0x3001 /* ob/db values for 2Ghz (ar5211_rfregs) */ -#define AR5K_EEPROM_VERSION_3_2 0x3002 /* different frequency representation (eeprom_bin2freq) */ -#define AR5K_EEPROM_VERSION_3_3 0x3003 /* offsets changed, has 32 CTLs (see below) and ee_false_detect (eeprom_read_modes) */ -#define AR5K_EEPROM_VERSION_3_4 0x3004 /* has ee_i_gain ee_cck_ofdm_power_delta (eeprom_read_modes) */ -#define AR5K_EEPROM_VERSION_4_0 0x4000 /* has ee_misc*, ee_cal_pier, ee_turbo_max_power and ee_xr_power (eeprom_init) */ -#define AR5K_EEPROM_VERSION_4_1 0x4001 /* has ee_margin_tx_rx (eeprom_init) */ -#define AR5K_EEPROM_VERSION_4_2 0x4002 /* has ee_cck_ofdm_gain_delta (eeprom_init) */ -#define AR5K_EEPROM_VERSION_4_3 0x4003 -#define AR5K_EEPROM_VERSION_4_4 0x4004 -#define AR5K_EEPROM_VERSION_4_5 0x4005 -#define AR5K_EEPROM_VERSION_4_6 0x4006 /* has ee_scaled_cck_delta */ -#define AR5K_EEPROM_VERSION_4_7 0x4007 - -#define AR5K_EEPROM_MODE_11A 0 -#define AR5K_EEPROM_MODE_11B 1 -#define AR5K_EEPROM_MODE_11G 2 - -#define AR5K_EEPROM_HDR AR5K_EEPROM_INFO(2) /* Header that contains the device caps */ -#define AR5K_EEPROM_HDR_11A(_v) (((_v) >> AR5K_EEPROM_MODE_11A) & 0x1) -#define AR5K_EEPROM_HDR_11B(_v) (((_v) >> AR5K_EEPROM_MODE_11B) & 0x1) -#define AR5K_EEPROM_HDR_11G(_v) (((_v) >> AR5K_EEPROM_MODE_11G) & 0x1) -#define AR5K_EEPROM_HDR_T_2GHZ_DIS(_v) (((_v) >> 3) & 0x1) /* Disable turbo for 2Ghz (?) */ -#define AR5K_EEPROM_HDR_T_5GHZ_DBM(_v) (((_v) >> 4) & 0x7f) /* Max turbo power for a/XR mode (eeprom_init) */ -#define AR5K_EEPROM_HDR_DEVICE(_v) (((_v) >> 11) & 0x7) -#define AR5K_EEPROM_HDR_T_5GHZ_DIS(_v) (((_v) >> 15) & 0x1) /* Disable turbo for 5Ghz (?) */ -#define AR5K_EEPROM_HDR_RFKILL(_v) (((_v) >> 14) & 0x1) /* Device has RFKill support */ - -#define AR5K_EEPROM_RFKILL_GPIO_SEL 0x0000001c -#define AR5K_EEPROM_RFKILL_GPIO_SEL_S 2 -#define AR5K_EEPROM_RFKILL_POLARITY 0x00000002 -#define AR5K_EEPROM_RFKILL_POLARITY_S 1 - -/* Newer EEPROMs are using a different offset */ -#define AR5K_EEPROM_OFF(_v, _v3_0, _v3_3) \ - (((_v) >= AR5K_EEPROM_VERSION_3_3) ? _v3_3 : _v3_0) - -#define AR5K_EEPROM_ANT_GAIN(_v) AR5K_EEPROM_OFF(_v, 0x00c4, 0x00c3) -#define AR5K_EEPROM_ANT_GAIN_5GHZ(_v) ((int8_t)(((_v) >> 8) & 0xff)) -#define AR5K_EEPROM_ANT_GAIN_2GHZ(_v) ((int8_t)((_v) & 0xff)) - -/* calibration settings */ -#define AR5K_EEPROM_MODES_11A(_v) AR5K_EEPROM_OFF(_v, 0x00c5, 0x00d4) -#define AR5K_EEPROM_MODES_11B(_v) AR5K_EEPROM_OFF(_v, 0x00d0, 0x00f2) -#define AR5K_EEPROM_MODES_11G(_v) AR5K_EEPROM_OFF(_v, 0x00da, 0x010d) -#define AR5K_EEPROM_CTL(_v) AR5K_EEPROM_OFF(_v, 0x00e4, 0x0128) /* Conformance test limits */ - -/* [3.1 - 3.3] */ -#define AR5K_EEPROM_OBDB0_2GHZ 0x00ec -#define AR5K_EEPROM_OBDB1_2GHZ 0x00ed - -/* Misc values available since EEPROM 4.0 */ -#define AR5K_EEPROM_MISC0 0x00c4 -#define AR5K_EEPROM_EARSTART(_v) ((_v) & 0xfff) -#define AR5K_EEPROM_EEMAP(_v) (((_v) >> 14) & 0x3) -#define AR5K_EEPROM_MISC1 0x00c5 -#define AR5K_EEPROM_TARGET_PWRSTART(_v) ((_v) & 0xfff) -#define AR5K_EEPROM_HAS32KHZCRYSTAL(_v) (((_v) >> 14) & 0x1) - -/* * EEPROM data register */ #define AR5K_EEPROM_DATA_5211 0x6004 @@ -1950,13 +1858,13 @@ #define AR5K_PHY_GAIN_OFFSET_RXTX_FLAG 0x00020000 /* RX-TX flag (?) */ /* - * Desired size register + * Desired ADC/PGA size register * (for more infos read ANI patent) */ #define AR5K_PHY_DESIRED_SIZE 0x9850 /* Register Address */ #define AR5K_PHY_DESIRED_SIZE_ADC 0x000000ff /* Mask for ADC desired size */ #define AR5K_PHY_DESIRED_SIZE_PGA 0x0000ff00 /* Mask for PGA desired size */ -#define AR5K_PHY_DESIRED_SIZE_TOT 0x0ff00000 /* Mask for Total desired size (?) */ +#define AR5K_PHY_DESIRED_SIZE_TOT 0x0ff00000 /* Mask for Total desired size */ /* * PHY signal register diff --git a/drivers/net/wireless/ath5k/reset.c b/drivers/net/wireless/ath5k/reset.c new file mode 100644 index 000000000000..d260fba0180f --- /dev/null +++ b/drivers/net/wireless/ath5k/reset.c @@ -0,0 +1,925 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2007-2008 Luis Rodriguez <mcgrof@winlab.rutgers.edu> + * Copyright (c) 2007-2008 Pavel Roskin <proski@gnu.org> + * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#define _ATH5K_RESET + +/*****************************\ + Reset functions and helpers +\*****************************/ + +#include <linux/pci.h> +#include "ath5k.h" +#include "reg.h" +#include "base.h" +#include "debug.h" + +/** + * ath5k_hw_write_ofdm_timings - set OFDM timings on AR5212 + * + * @ah: the &struct ath5k_hw + * @channel: the currently set channel upon reset + * + * Write the OFDM timings for the AR5212 upon reset. This is a helper for + * ath5k_hw_reset(). This seems to tune the PLL a specified frequency + * depending on the bandwidth of the channel. + * + */ +static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + /* Get exponent and mantissa and set it */ + u32 coef_scaled, coef_exp, coef_man, + ds_coef_exp, ds_coef_man, clock; + + if (!(ah->ah_version == AR5K_AR5212) || + !(channel->hw_value & CHANNEL_OFDM)) + BUG(); + + /* Seems there are two PLLs, one for baseband sampling and one + * for tuning. Tuning basebands are 40 MHz or 80MHz when in + * turbo. */ + clock = channel->hw_value & CHANNEL_TURBO ? 80 : 40; + coef_scaled = ((5 * (clock << 24)) / 2) / + channel->center_freq; + + for (coef_exp = 31; coef_exp > 0; coef_exp--) + if ((coef_scaled >> coef_exp) & 0x1) + break; + + if (!coef_exp) + return -EINVAL; + + coef_exp = 14 - (coef_exp - 24); + coef_man = coef_scaled + + (1 << (24 - coef_exp - 1)); + ds_coef_man = coef_man >> (24 - coef_exp); + ds_coef_exp = coef_exp - 16; + + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3, + AR5K_PHY_TIMING_3_DSC_MAN, ds_coef_man); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3, + AR5K_PHY_TIMING_3_DSC_EXP, ds_coef_exp); + + return 0; +} + + +/* + * index into rates for control rates, we can set it up like this because + * this is only used for AR5212 and we know it supports G mode + */ +static int control_rates[] = + { 0, 1, 1, 1, 4, 4, 6, 6, 8, 8, 8, 8 }; + +/** + * ath5k_hw_write_rate_duration - set rate duration during hw resets + * + * @ah: the &struct ath5k_hw + * @mode: one of enum ath5k_driver_mode + * + * Write the rate duration table upon hw reset. This is a helper for + * ath5k_hw_reset(). It seems all this is doing is setting an ACK timeout for + * the hardware for the current mode for each rate. The rates which are capable + * of short preamble (802.11b rates 2Mbps, 5.5Mbps, and 11Mbps) have another + * register for the short preamble ACK timeout calculation. + */ +static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah, + unsigned int mode) +{ + struct ath5k_softc *sc = ah->ah_sc; + struct ieee80211_rate *rate; + unsigned int i; + + /* Write rate duration table */ + for (i = 0; i < sc->sbands[IEEE80211_BAND_2GHZ].n_bitrates; i++) { + u32 reg; + u16 tx_time; + + rate = &sc->sbands[IEEE80211_BAND_2GHZ].bitrates[control_rates[i]]; + + /* Set ACK timeout */ + reg = AR5K_RATE_DUR(rate->hw_value); + + /* An ACK frame consists of 10 bytes. If you add the FCS, + * which ieee80211_generic_frame_duration() adds, + * its 14 bytes. Note we use the control rate and not the + * actual rate for this rate. See mac80211 tx.c + * ieee80211_duration() for a brief description of + * what rate we should choose to TX ACKs. */ + tx_time = le16_to_cpu(ieee80211_generic_frame_duration(sc->hw, + sc->vif, 10, rate)); + + ath5k_hw_reg_write(ah, tx_time, reg); + + if (!(rate->flags & IEEE80211_RATE_SHORT_PREAMBLE)) + continue; + + /* + * We're not distinguishing short preamble here, + * This is true, all we'll get is a longer value here + * which is not necessarilly bad. We could use + * export ieee80211_frame_duration() but that needs to be + * fixed first to be properly used by mac802111 drivers: + * + * - remove erp stuff and let the routine figure ofdm + * erp rates + * - remove passing argument ieee80211_local as + * drivers don't have access to it + * - move drivers using ieee80211_generic_frame_duration() + * to this + */ + ath5k_hw_reg_write(ah, tx_time, + reg + (AR5K_SET_SHORT_PREAMBLE << 2)); + } +} + +/* + * Reset chipset + */ +static int ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val) +{ + int ret; + u32 mask = val ? val : ~0U; + + ATH5K_TRACE(ah->ah_sc); + + /* Read-and-clear RX Descriptor Pointer*/ + ath5k_hw_reg_read(ah, AR5K_RXDP); + + /* + * Reset the device and wait until success + */ + ath5k_hw_reg_write(ah, val, AR5K_RESET_CTL); + + /* Wait at least 128 PCI clocks */ + udelay(15); + + if (ah->ah_version == AR5K_AR5210) { + val &= AR5K_RESET_CTL_CHIP; + mask &= AR5K_RESET_CTL_CHIP; + } else { + val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND; + mask &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND; + } + + ret = ath5k_hw_register_timeout(ah, AR5K_RESET_CTL, mask, val, false); + + /* + * Reset configuration register (for hw byte-swap). Note that this + * is only set for big endian. We do the necessary magic in + * AR5K_INIT_CFG. + */ + if ((val & AR5K_RESET_CTL_PCU) == 0) + ath5k_hw_reg_write(ah, AR5K_INIT_CFG, AR5K_CFG); + + return ret; +} + +/* + * Sleep control + */ +int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, + bool set_chip, u16 sleep_duration) +{ + unsigned int i; + u32 staid, data; + + ATH5K_TRACE(ah->ah_sc); + staid = ath5k_hw_reg_read(ah, AR5K_STA_ID1); + + switch (mode) { + case AR5K_PM_AUTO: + staid &= ~AR5K_STA_ID1_DEFAULT_ANTENNA; + /* fallthrough */ + case AR5K_PM_NETWORK_SLEEP: + if (set_chip) + ath5k_hw_reg_write(ah, + AR5K_SLEEP_CTL_SLE_ALLOW | + sleep_duration, + AR5K_SLEEP_CTL); + + staid |= AR5K_STA_ID1_PWR_SV; + break; + + case AR5K_PM_FULL_SLEEP: + if (set_chip) + ath5k_hw_reg_write(ah, AR5K_SLEEP_CTL_SLE_SLP, + AR5K_SLEEP_CTL); + + staid |= AR5K_STA_ID1_PWR_SV; + break; + + case AR5K_PM_AWAKE: + + staid &= ~AR5K_STA_ID1_PWR_SV; + + if (!set_chip) + goto commit; + + /* Preserve sleep duration */ + data = ath5k_hw_reg_read(ah, AR5K_SLEEP_CTL); + if (data & 0xffc00000) + data = 0; + else + data = data & 0xfffcffff; + + ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL); + udelay(15); + + for (i = 50; i > 0; i--) { + /* Check if the chip did wake up */ + if ((ath5k_hw_reg_read(ah, AR5K_PCICFG) & + AR5K_PCICFG_SPWR_DN) == 0) + break; + + /* Wait a bit and retry */ + udelay(200); + ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL); + } + + /* Fail if the chip didn't wake up */ + if (i <= 0) + return -EIO; + + break; + + default: + return -EINVAL; + } + +commit: + ah->ah_power_mode = mode; + ath5k_hw_reg_write(ah, staid, AR5K_STA_ID1); + + return 0; +} + +/* + * Bring up MAC + PHY Chips + */ +int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial) +{ + struct pci_dev *pdev = ah->ah_sc->pdev; + u32 turbo, mode, clock, bus_flags; + int ret; + + turbo = 0; + mode = 0; + clock = 0; + + ATH5K_TRACE(ah->ah_sc); + + /* Wakeup the device */ + ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0); + if (ret) { + ATH5K_ERR(ah->ah_sc, "failed to wakeup the MAC Chip\n"); + return ret; + } + + if (ah->ah_version != AR5K_AR5210) { + /* + * Get channel mode flags + */ + + if (ah->ah_radio >= AR5K_RF5112) { + mode = AR5K_PHY_MODE_RAD_RF5112; + clock = AR5K_PHY_PLL_RF5112; + } else { + mode = AR5K_PHY_MODE_RAD_RF5111; /*Zero*/ + clock = AR5K_PHY_PLL_RF5111; /*Zero*/ + } + + if (flags & CHANNEL_2GHZ) { + mode |= AR5K_PHY_MODE_FREQ_2GHZ; + clock |= AR5K_PHY_PLL_44MHZ; + + if (flags & CHANNEL_CCK) { + mode |= AR5K_PHY_MODE_MOD_CCK; + } else if (flags & CHANNEL_OFDM) { + /* XXX Dynamic OFDM/CCK is not supported by the + * AR5211 so we set MOD_OFDM for plain g (no + * CCK headers) operation. We need to test + * this, 5211 might support ofdm-only g after + * all, there are also initial register values + * in the code for g mode (see initvals.c). */ + if (ah->ah_version == AR5K_AR5211) + mode |= AR5K_PHY_MODE_MOD_OFDM; + else + mode |= AR5K_PHY_MODE_MOD_DYN; + } else { + ATH5K_ERR(ah->ah_sc, + "invalid radio modulation mode\n"); + return -EINVAL; + } + } else if (flags & CHANNEL_5GHZ) { + mode |= AR5K_PHY_MODE_FREQ_5GHZ; + clock |= AR5K_PHY_PLL_40MHZ; + + if (flags & CHANNEL_OFDM) + mode |= AR5K_PHY_MODE_MOD_OFDM; + else { + ATH5K_ERR(ah->ah_sc, + "invalid radio modulation mode\n"); + return -EINVAL; + } + } else { + ATH5K_ERR(ah->ah_sc, "invalid radio frequency mode\n"); + return -EINVAL; + } + + if (flags & CHANNEL_TURBO) + turbo = AR5K_PHY_TURBO_MODE | AR5K_PHY_TURBO_SHORT; + } else { /* Reset the device */ + + /* ...enable Atheros turbo mode if requested */ + if (flags & CHANNEL_TURBO) + ath5k_hw_reg_write(ah, AR5K_PHY_TURBO_MODE, + AR5K_PHY_TURBO); + } + + /* reseting PCI on PCI-E cards results card to hang + * and always return 0xffff... so we ingore that flag + * for PCI-E cards */ + bus_flags = (pdev->is_pcie) ? 0 : AR5K_RESET_CTL_PCI; + + /* Reset chipset */ + ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU | + AR5K_RESET_CTL_BASEBAND | bus_flags); + if (ret) { + ATH5K_ERR(ah->ah_sc, "failed to reset the MAC Chip\n"); + return -EIO; + } + + if (ah->ah_version == AR5K_AR5210) + udelay(2300); + + /* ...wakeup again!*/ + ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0); + if (ret) { + ATH5K_ERR(ah->ah_sc, "failed to resume the MAC Chip\n"); + return ret; + } + + /* ...final warm reset */ + if (ath5k_hw_nic_reset(ah, 0)) { + ATH5K_ERR(ah->ah_sc, "failed to warm reset the MAC Chip\n"); + return -EIO; + } + + if (ah->ah_version != AR5K_AR5210) { + /* ...set the PHY operating mode */ + ath5k_hw_reg_write(ah, clock, AR5K_PHY_PLL); + udelay(300); + + ath5k_hw_reg_write(ah, mode, AR5K_PHY_MODE); + ath5k_hw_reg_write(ah, turbo, AR5K_PHY_TURBO); + } + + return 0; +} + +/* + * Main reset function + */ +int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, + struct ieee80211_channel *channel, bool change_channel) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct pci_dev *pdev = ah->ah_sc->pdev; + u32 data, s_seq, s_ant, s_led[3], dma_size; + unsigned int i, mode, freq, ee_mode, ant[2]; + int ret; + + ATH5K_TRACE(ah->ah_sc); + + s_seq = 0; + s_ant = 0; + ee_mode = 0; + freq = 0; + mode = 0; + + /* + * Save some registers before a reset + */ + /*DCU/Antenna selection not available on 5210*/ + if (ah->ah_version != AR5K_AR5210) { + if (change_channel) { + /* Seq number for queue 0 -do this for all queues ? */ + s_seq = ath5k_hw_reg_read(ah, + AR5K_QUEUE_DFS_SEQNUM(0)); + /*Default antenna*/ + s_ant = ath5k_hw_reg_read(ah, AR5K_DEFAULT_ANTENNA); + } + } + + /*GPIOs*/ + s_led[0] = ath5k_hw_reg_read(ah, AR5K_PCICFG) & AR5K_PCICFG_LEDSTATE; + s_led[1] = ath5k_hw_reg_read(ah, AR5K_GPIOCR); + s_led[2] = ath5k_hw_reg_read(ah, AR5K_GPIODO); + + if (change_channel && ah->ah_rf_banks != NULL) + ath5k_hw_get_rf_gain(ah); + + + /*Wakeup the device*/ + ret = ath5k_hw_nic_wakeup(ah, channel->hw_value, false); + if (ret) + return ret; + + /* + * Initialize operating mode + */ + ah->ah_op_mode = op_mode; + + /* + * 5111/5112 Settings + * 5210 only comes with RF5110 + */ + if (ah->ah_version != AR5K_AR5210) { + if (ah->ah_radio != AR5K_RF5111 && + ah->ah_radio != AR5K_RF5112 && + ah->ah_radio != AR5K_RF5413 && + ah->ah_radio != AR5K_RF2413 && + ah->ah_radio != AR5K_RF2425) { + ATH5K_ERR(ah->ah_sc, + "invalid phy radio: %u\n", ah->ah_radio); + return -EINVAL; + } + + switch (channel->hw_value & CHANNEL_MODES) { + case CHANNEL_A: + mode = AR5K_MODE_11A; + freq = AR5K_INI_RFGAIN_5GHZ; + ee_mode = AR5K_EEPROM_MODE_11A; + break; + case CHANNEL_G: + mode = AR5K_MODE_11G; + freq = AR5K_INI_RFGAIN_2GHZ; + ee_mode = AR5K_EEPROM_MODE_11G; + break; + case CHANNEL_B: + mode = AR5K_MODE_11B; + freq = AR5K_INI_RFGAIN_2GHZ; + ee_mode = AR5K_EEPROM_MODE_11B; + break; + case CHANNEL_T: + mode = AR5K_MODE_11A_TURBO; + freq = AR5K_INI_RFGAIN_5GHZ; + ee_mode = AR5K_EEPROM_MODE_11A; + break; + /*Is this ok on 5211 too ?*/ + case CHANNEL_TG: + mode = AR5K_MODE_11G_TURBO; + freq = AR5K_INI_RFGAIN_2GHZ; + ee_mode = AR5K_EEPROM_MODE_11G; + break; + case CHANNEL_XR: + if (ah->ah_version == AR5K_AR5211) { + ATH5K_ERR(ah->ah_sc, + "XR mode not available on 5211"); + return -EINVAL; + } + mode = AR5K_MODE_XR; + freq = AR5K_INI_RFGAIN_5GHZ; + ee_mode = AR5K_EEPROM_MODE_11A; + break; + default: + ATH5K_ERR(ah->ah_sc, + "invalid channel: %d\n", channel->center_freq); + return -EINVAL; + } + + /* PHY access enable */ + ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0)); + + } + + ret = ath5k_hw_write_initvals(ah, mode, change_channel); + if (ret) + return ret; + + /* + * 5211/5212 Specific + */ + if (ah->ah_version != AR5K_AR5210) { + /* + * Write initial RF gain settings + * This should work for both 5111/5112 + */ + ret = ath5k_hw_rfgain(ah, freq); + if (ret) + return ret; + + mdelay(1); + + /* + * Write some more initial register settings + */ + if (ah->ah_version == AR5K_AR5212) { + ath5k_hw_reg_write(ah, 0x0002a002, 0x982c); + + if (channel->hw_value == CHANNEL_G) + if (ah->ah_mac_srev < AR5K_SREV_VER_AR2413) + ath5k_hw_reg_write(ah, 0x00f80d80, + 0x994c); + else if (ah->ah_mac_srev < AR5K_SREV_VER_AR2424) + ath5k_hw_reg_write(ah, 0x00380140, + 0x994c); + else if (ah->ah_mac_srev < AR5K_SREV_VER_AR2425) + ath5k_hw_reg_write(ah, 0x00fc0ec0, + 0x994c); + else /* 2425 */ + ath5k_hw_reg_write(ah, 0x00fc0fc0, + 0x994c); + else + ath5k_hw_reg_write(ah, 0x00000000, 0x994c); + + /* Some bits are disabled here, we know nothing about + * register 0xa228 yet, most of the times this ends up + * with a value 0x9b5 -haven't seen any dump with + * a different value- */ + /* Got this from decompiling binary HAL */ + data = ath5k_hw_reg_read(ah, 0xa228); + data &= 0xfffffdff; + ath5k_hw_reg_write(ah, data, 0xa228); + + data = ath5k_hw_reg_read(ah, 0xa228); + data &= 0xfffe03ff; + ath5k_hw_reg_write(ah, data, 0xa228); + data = 0; + + /* Just write 0x9b5 ? */ + /* ath5k_hw_reg_write(ah, 0x000009b5, 0xa228); */ + ath5k_hw_reg_write(ah, 0x0000000f, AR5K_SEQ_MASK); + ath5k_hw_reg_write(ah, 0x00000000, 0xa254); + ath5k_hw_reg_write(ah, 0x0000000e, AR5K_PHY_SCAL); + } + + /* Fix for first revision of the RF5112 RF chipset */ + if (ah->ah_radio >= AR5K_RF5112 && + ah->ah_radio_5ghz_revision < + AR5K_SREV_RAD_5112A) { + ath5k_hw_reg_write(ah, AR5K_PHY_CCKTXCTL_WORLD, + AR5K_PHY_CCKTXCTL); + if (channel->hw_value & CHANNEL_5GHZ) + data = 0xffb81020; + else + data = 0xffb80d20; + ath5k_hw_reg_write(ah, data, AR5K_PHY_FRAME_CTL); + data = 0; + } + + /* + * Set TX power (FIXME) + */ + ret = ath5k_hw_txpower(ah, channel, AR5K_TUNE_DEFAULT_TXPOWER); + if (ret) + return ret; + + /* Write rate duration table only on AR5212 and if + * virtual interface has already been brought up + * XXX: rethink this after new mode changes to + * mac80211 are integrated */ + if (ah->ah_version == AR5K_AR5212 && + ah->ah_sc->vif != NULL) + ath5k_hw_write_rate_duration(ah, mode); + + /* + * Write RF registers + */ + ret = ath5k_hw_rfregs(ah, channel, mode); + if (ret) + return ret; + + /* + * Configure additional registers + */ + + /* Write OFDM timings on 5212*/ + if (ah->ah_version == AR5K_AR5212 && + channel->hw_value & CHANNEL_OFDM) { + ret = ath5k_hw_write_ofdm_timings(ah, channel); + if (ret) + return ret; + } + + /*Enable/disable 802.11b mode on 5111 + (enable 2111 frequency converter + CCK)*/ + if (ah->ah_radio == AR5K_RF5111) { + if (mode == AR5K_MODE_11B) + AR5K_REG_ENABLE_BITS(ah, AR5K_TXCFG, + AR5K_TXCFG_B_MODE); + else + AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG, + AR5K_TXCFG_B_MODE); + } + + /* + * Set channel and calibrate the PHY + */ + ret = ath5k_hw_channel(ah, channel); + if (ret) + return ret; + + /* Set antenna mode */ + AR5K_REG_MASKED_BITS(ah, AR5K_PHY_ANT_CTL, + ah->ah_antenna[ee_mode][0], 0xfffffc06); + + /* + * In case a fixed antenna was set as default + * write the same settings on both AR5K_PHY_ANT_SWITCH_TABLE + * registers. + */ + if (s_ant != 0) { + if (s_ant == AR5K_ANT_FIXED_A) /* 1 - Main */ + ant[0] = ant[1] = AR5K_ANT_FIXED_A; + else /* 2 - Aux */ + ant[0] = ant[1] = AR5K_ANT_FIXED_B; + } else { + ant[0] = AR5K_ANT_FIXED_A; + ant[1] = AR5K_ANT_FIXED_B; + } + + ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[0]], + AR5K_PHY_ANT_SWITCH_TABLE_0); + ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[1]], + AR5K_PHY_ANT_SWITCH_TABLE_1); + + /* Commit values from EEPROM */ + if (ah->ah_radio == AR5K_RF5111) + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_FRAME_CTL, + AR5K_PHY_FRAME_CTL_TX_CLIP, ee->ee_tx_clip); + + ath5k_hw_reg_write(ah, + AR5K_PHY_NF_SVAL(ee->ee_noise_floor_thr[ee_mode]), + AR5K_PHY_NFTHRES); + + AR5K_REG_MASKED_BITS(ah, AR5K_PHY_SETTLING, + (ee->ee_switch_settling[ee_mode] << 7) & 0x3f80, + 0xffffc07f); + AR5K_REG_MASKED_BITS(ah, AR5K_PHY_GAIN, + (ee->ee_ant_tx_rx[ee_mode] << 12) & 0x3f000, + 0xfffc0fff); + AR5K_REG_MASKED_BITS(ah, AR5K_PHY_DESIRED_SIZE, + (ee->ee_adc_desired_size[ee_mode] & 0x00ff) | + ((ee->ee_pga_desired_size[ee_mode] << 8) & 0xff00), + 0xffff0000); + + ath5k_hw_reg_write(ah, + (ee->ee_tx_end2xpa_disable[ee_mode] << 24) | + (ee->ee_tx_end2xpa_disable[ee_mode] << 16) | + (ee->ee_tx_frm2xpa_enable[ee_mode] << 8) | + (ee->ee_tx_frm2xpa_enable[ee_mode]), AR5K_PHY_RF_CTL4); + + AR5K_REG_MASKED_BITS(ah, AR5K_PHY_RF_CTL3, + ee->ee_tx_end2xlna_enable[ee_mode] << 8, 0xffff00ff); + AR5K_REG_MASKED_BITS(ah, AR5K_PHY_NF, + (ee->ee_thr_62[ee_mode] << 12) & 0x7f000, 0xfff80fff); + AR5K_REG_MASKED_BITS(ah, AR5K_PHY_OFDM_SELFCORR, 4, 0xffffff01); + + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, + AR5K_PHY_IQ_CORR_ENABLE | + (ee->ee_i_cal[ee_mode] << AR5K_PHY_IQ_CORR_Q_I_COFF_S) | + ee->ee_q_cal[ee_mode]); + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN_2GHZ, + AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX, + ee->ee_margin_tx_rx[ee_mode]); + + } else { + mdelay(1); + /* Disable phy and wait */ + ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT); + mdelay(1); + } + + /* + * Restore saved values + */ + /*DCU/Antenna selection not available on 5210*/ + if (ah->ah_version != AR5K_AR5210) { + ath5k_hw_reg_write(ah, s_seq, AR5K_QUEUE_DFS_SEQNUM(0)); + ath5k_hw_reg_write(ah, s_ant, AR5K_DEFAULT_ANTENNA); + } + AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, s_led[0]); + ath5k_hw_reg_write(ah, s_led[1], AR5K_GPIOCR); + ath5k_hw_reg_write(ah, s_led[2], AR5K_GPIODO); + + /* + * Misc + */ + /* XXX: add ah->aid once mac80211 gives this to us */ + ath5k_hw_set_associd(ah, ah->ah_bssid, 0); + + ath5k_hw_set_opmode(ah); + /*PISR/SISR Not available on 5210*/ + if (ah->ah_version != AR5K_AR5210) { + ath5k_hw_reg_write(ah, 0xffffffff, AR5K_PISR); + /* If we later allow tuning for this, store into sc structure */ + data = AR5K_TUNE_RSSI_THRES | + AR5K_TUNE_BMISS_THRES << AR5K_RSSI_THR_BMISS_S; + ath5k_hw_reg_write(ah, data, AR5K_RSSI_THR); + } + + /* + * Set Rx/Tx DMA Configuration + * + * Set maximum DMA size (512) except for PCI-E cards since + * it causes rx overruns and tx errors (tested on 5424 but since + * rx overruns also occur on 5416/5418 with madwifi we set 128 + * for all PCI-E cards to be safe). + * + * In dumps this is 128 for allchips. + * + * XXX: need to check 5210 for this + * TODO: Check out tx triger level, it's always 64 on dumps but I + * guess we can tweak it and see how it goes ;-) + */ + dma_size = (pdev->is_pcie) ? AR5K_DMASIZE_128B : AR5K_DMASIZE_512B; + if (ah->ah_version != AR5K_AR5210) { + AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG, + AR5K_TXCFG_SDMAMR, dma_size); + AR5K_REG_WRITE_BITS(ah, AR5K_RXCFG, + AR5K_RXCFG_SDMAMW, dma_size); + } + + /* + * Enable the PHY and wait until completion + */ + ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT); + + /* + * On 5211+ read activation -> rx delay + * and use it. + */ + if (ah->ah_version != AR5K_AR5210) { + data = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) & + AR5K_PHY_RX_DELAY_M; + data = (channel->hw_value & CHANNEL_CCK) ? + ((data << 2) / 22) : (data / 10); + + udelay(100 + (2 * data)); + data = 0; + } else { + mdelay(1); + } + + /* + * Perform ADC test (?) + */ + data = ath5k_hw_reg_read(ah, AR5K_PHY_TST1); + ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1); + for (i = 0; i <= 20; i++) { + if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10)) + break; + udelay(200); + } + ath5k_hw_reg_write(ah, data, AR5K_PHY_TST1); + data = 0; + + /* + * Start automatic gain calibration + * + * During AGC calibration RX path is re-routed to + * a signal detector so we don't receive anything. + * + * This method is used to calibrate some static offsets + * used together with on-the fly I/Q calibration (the + * one performed via ath5k_hw_phy_calibrate), that doesn't + * interrupt rx path. + * + * If we are in a noisy environment AGC calibration may time + * out. + */ + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, + AR5K_PHY_AGCCTL_CAL); + + /* At the same time start I/Q calibration for QAM constellation + * -no need for CCK- */ + ah->ah_calibration = false; + if (!(mode == AR5K_MODE_11B)) { + ah->ah_calibration = true; + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, + AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15); + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, + AR5K_PHY_IQ_RUN); + } + + /* Wait for gain calibration to finish (we check for I/Q calibration + * during ath5k_phy_calibrate) */ + if (ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL, + AR5K_PHY_AGCCTL_CAL, 0, false)) { + ATH5K_ERR(ah->ah_sc, "gain calibration timeout (%uMHz)\n", + channel->center_freq); + return -EAGAIN; + } + + /* + * Start noise floor calibration + * + * If we run NF calibration before AGC, it always times out. + * Binary HAL starts NF and AGC calibration at the same time + * and only waits for AGC to finish. I believe that's wrong because + * during NF calibration, rx path is also routed to a detector, so if + * it doesn't finish we won't have RX. + * + * XXX: Find an interval that's OK for all cards... + */ + ret = ath5k_hw_noise_floor_calibration(ah, channel->center_freq); + if (ret) + return ret; + + /* + * Reset queues and start beacon timers at the end of the reset routine + */ + for (i = 0; i < ah->ah_capabilities.cap_queues.q_tx_num; i++) { + /*No QCU on 5210*/ + if (ah->ah_version != AR5K_AR5210) + AR5K_REG_WRITE_Q(ah, AR5K_QUEUE_QCUMASK(i), i); + + ret = ath5k_hw_reset_tx_queue(ah, i); + if (ret) { + ATH5K_ERR(ah->ah_sc, + "failed to reset TX queue #%d\n", i); + return ret; + } + } + + /* Pre-enable interrupts on 5211/5212*/ + if (ah->ah_version != AR5K_AR5210) + ath5k_hw_set_imr(ah, AR5K_INT_RX | AR5K_INT_TX | + AR5K_INT_FATAL); + + /* + * Set RF kill flags if supported by the device (read from the EEPROM) + * Disable gpio_intr for now since it results system hang. + * TODO: Handle this in ath5k_intr + */ +#if 0 + if (AR5K_EEPROM_HDR_RFKILL(ah->ah_capabilities.cap_eeprom.ee_header)) { + ath5k_hw_set_gpio_input(ah, 0); + ah->ah_gpio[0] = ath5k_hw_get_gpio(ah, 0); + if (ah->ah_gpio[0] == 0) + ath5k_hw_set_gpio_intr(ah, 0, 1); + else + ath5k_hw_set_gpio_intr(ah, 0, 0); + } +#endif + + /* + * Set the 32MHz reference clock on 5212 phy clock sleep register + * + * TODO: Find out how to switch to external 32Khz clock to save power + */ + if (ah->ah_version == AR5K_AR5212) { + ath5k_hw_reg_write(ah, AR5K_PHY_SCR_32MHZ, AR5K_PHY_SCR); + ath5k_hw_reg_write(ah, AR5K_PHY_SLMT_32MHZ, AR5K_PHY_SLMT); + ath5k_hw_reg_write(ah, AR5K_PHY_SCAL_32MHZ, AR5K_PHY_SCAL); + ath5k_hw_reg_write(ah, AR5K_PHY_SCLOCK_32MHZ, AR5K_PHY_SCLOCK); + ath5k_hw_reg_write(ah, AR5K_PHY_SDELAY_32MHZ, AR5K_PHY_SDELAY); + ath5k_hw_reg_write(ah, ah->ah_phy_spending, AR5K_PHY_SPENDING); + + data = ath5k_hw_reg_read(ah, AR5K_USEC_5211) & 0xffffc07f ; + data |= (ah->ah_phy_spending == AR5K_PHY_SPENDING_18) ? + 0x00000f80 : 0x00001380 ; + ath5k_hw_reg_write(ah, data, AR5K_USEC_5211); + data = 0; + } + + if (ah->ah_version == AR5K_AR5212) { + ath5k_hw_reg_write(ah, 0x000100aa, 0x8118); + ath5k_hw_reg_write(ah, 0x00003210, 0x811c); + ath5k_hw_reg_write(ah, 0x00000052, 0x8108); + if (ah->ah_mac_srev >= AR5K_SREV_VER_AR2413) + ath5k_hw_reg_write(ah, 0x00000004, 0x8120); + } + + /* + * Disable beacons and reset the register + */ + AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE | + AR5K_BEACON_RESET_TSF); + + return 0; +} + +#undef _ATH5K_RESET |