summaryrefslogtreecommitdiff
path: root/drivers/net/phy
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/phy')
-rw-r--r--drivers/net/phy/Kconfig10
-rw-r--r--drivers/net/phy/Makefile1
-rw-r--r--drivers/net/phy/at803x.c128
-rw-r--r--drivers/net/phy/bcm63xx.c4
-rw-r--r--drivers/net/phy/marvell.c108
-rw-r--r--drivers/net/phy/mdio-sun4i.c194
-rw-r--r--drivers/net/phy/phy.c26
-rw-r--r--drivers/net/phy/phy_device.c11
-rw-r--r--drivers/net/phy/spi_ks8995.c14
-rw-r--r--drivers/net/phy/vitesse.c38
10 files changed, 446 insertions, 88 deletions
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 1e11f2bfd9ce..3a316b30089f 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -144,6 +144,16 @@ config MDIO_OCTEON
If in doubt, say Y.
+config MDIO_SUN4I
+ tristate "Allwinner sun4i MDIO interface support"
+ depends on ARCH_SUNXI
+ select REGULATOR
+ select REGULATOR_FIXED_VOLTAGE
+ help
+ This driver supports the MDIO interface found in the network
+ interface units of the Allwinner SoC that have an EMAC (A10,
+ A12, A10s, etc.)
+
config MDIO_BUS_MUX
tristate
depends on OF_MDIO
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 9645e389a58d..23a2ab2e847e 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -30,3 +30,4 @@ obj-$(CONFIG_AMD_PHY) += amd.o
obj-$(CONFIG_MDIO_BUS_MUX) += mdio-mux.o
obj-$(CONFIG_MDIO_BUS_MUX_GPIO) += mdio-mux-gpio.o
obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += mdio-mux-mmioreg.o
+obj-$(CONFIG_MDIO_SUN4I) += mdio-sun4i.o
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 45cbc10de01c..1f7091b3c27c 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -27,15 +27,22 @@
#define AT803X_MMD_ACCESS_CONTROL 0x0D
#define AT803X_MMD_ACCESS_CONTROL_DATA 0x0E
#define AT803X_FUNC_DATA 0x4003
+#define AT803X_DEBUG_ADDR 0x1D
+#define AT803X_DEBUG_DATA 0x1E
+#define AT803X_DEBUG_SYSTEM_MODE_CTRL 0x05
+#define AT803X_DEBUG_RGMII_TX_CLK_DLY BIT(8)
MODULE_DESCRIPTION("Atheros 803x PHY driver");
MODULE_AUTHOR("Matus Ujhelyi");
MODULE_LICENSE("GPL");
-static void at803x_set_wol_mac_addr(struct phy_device *phydev)
+static int at803x_set_wol(struct phy_device *phydev,
+ struct ethtool_wolinfo *wol)
{
struct net_device *ndev = phydev->attached_dev;
const u8 *mac;
+ int ret;
+ u32 value;
unsigned int i, offsets[] = {
AT803X_LOC_MAC_ADDR_32_47_OFFSET,
AT803X_LOC_MAC_ADDR_16_31_OFFSET,
@@ -43,30 +50,61 @@ static void at803x_set_wol_mac_addr(struct phy_device *phydev)
};
if (!ndev)
- return;
+ return -ENODEV;
- mac = (const u8 *) ndev->dev_addr;
+ if (wol->wolopts & WAKE_MAGIC) {
+ mac = (const u8 *) ndev->dev_addr;
- if (!is_valid_ether_addr(mac))
- return;
+ if (!is_valid_ether_addr(mac))
+ return -EFAULT;
- for (i = 0; i < 3; i++) {
- phy_write(phydev, AT803X_MMD_ACCESS_CONTROL,
+ for (i = 0; i < 3; i++) {
+ phy_write(phydev, AT803X_MMD_ACCESS_CONTROL,
AT803X_DEVICE_ADDR);
- phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA,
+ phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA,
offsets[i]);
- phy_write(phydev, AT803X_MMD_ACCESS_CONTROL,
+ phy_write(phydev, AT803X_MMD_ACCESS_CONTROL,
AT803X_FUNC_DATA);
- phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA,
+ phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA,
mac[(i * 2) + 1] | (mac[(i * 2)] << 8));
+ }
+
+ value = phy_read(phydev, AT803X_INTR_ENABLE);
+ value |= AT803X_WOL_ENABLE;
+ ret = phy_write(phydev, AT803X_INTR_ENABLE, value);
+ if (ret)
+ return ret;
+ value = phy_read(phydev, AT803X_INTR_STATUS);
+ } else {
+ value = phy_read(phydev, AT803X_INTR_ENABLE);
+ value &= (~AT803X_WOL_ENABLE);
+ ret = phy_write(phydev, AT803X_INTR_ENABLE, value);
+ if (ret)
+ return ret;
+ value = phy_read(phydev, AT803X_INTR_STATUS);
}
+
+ return ret;
+}
+
+static void at803x_get_wol(struct phy_device *phydev,
+ struct ethtool_wolinfo *wol)
+{
+ u32 value;
+
+ wol->supported = WAKE_MAGIC;
+ wol->wolopts = 0;
+
+ value = phy_read(phydev, AT803X_INTR_ENABLE);
+ if (value & AT803X_WOL_ENABLE)
+ wol->wolopts |= WAKE_MAGIC;
}
static int at803x_config_init(struct phy_device *phydev)
{
int val;
+ int ret;
u32 features;
- int status;
features = SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_AUI |
SUPPORTED_FIBRE | SUPPORTED_BNC;
@@ -100,20 +138,29 @@ static int at803x_config_init(struct phy_device *phydev)
phydev->supported = features;
phydev->advertising = features;
- /* enable WOL */
- at803x_set_wol_mac_addr(phydev);
- status = phy_write(phydev, AT803X_INTR_ENABLE, AT803X_WOL_ENABLE);
- status = phy_read(phydev, AT803X_INTR_STATUS);
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
+ ret = phy_write(phydev, AT803X_DEBUG_ADDR,
+ AT803X_DEBUG_SYSTEM_MODE_CTRL);
+ if (ret)
+ return ret;
+ ret = phy_write(phydev, AT803X_DEBUG_DATA,
+ AT803X_DEBUG_RGMII_TX_CLK_DLY);
+ if (ret)
+ return ret;
+ }
return 0;
}
-/* ATHEROS 8035 */
-static struct phy_driver at8035_driver = {
+static struct phy_driver at803x_driver[] = {
+{
+ /* ATHEROS 8035 */
.phy_id = 0x004dd072,
.name = "Atheros 8035 ethernet",
.phy_id_mask = 0xffffffef,
.config_init = at803x_config_init,
+ .set_wol = at803x_set_wol,
+ .get_wol = at803x_get_wol,
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_aneg = &genphy_config_aneg,
@@ -121,14 +168,14 @@ static struct phy_driver at8035_driver = {
.driver = {
.owner = THIS_MODULE,
},
-};
-
-/* ATHEROS 8030 */
-static struct phy_driver at8030_driver = {
+}, {
+ /* ATHEROS 8030 */
.phy_id = 0x004dd076,
.name = "Atheros 8030 ethernet",
.phy_id_mask = 0xffffffef,
.config_init = at803x_config_init,
+ .set_wol = at803x_set_wol,
+ .get_wol = at803x_get_wol,
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_aneg = &genphy_config_aneg,
@@ -136,32 +183,33 @@ static struct phy_driver at8030_driver = {
.driver = {
.owner = THIS_MODULE,
},
-};
+}, {
+ /* ATHEROS 8031 */
+ .phy_id = 0x004dd074,
+ .name = "Atheros 8031 ethernet",
+ .phy_id_mask = 0xffffffef,
+ .config_init = at803x_config_init,
+ .set_wol = at803x_set_wol,
+ .get_wol = at803x_get_wol,
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_aneg = &genphy_config_aneg,
+ .read_status = &genphy_read_status,
+ .driver = {
+ .owner = THIS_MODULE,
+ },
+} };
static int __init atheros_init(void)
{
- int ret;
-
- ret = phy_driver_register(&at8035_driver);
- if (ret)
- goto err1;
-
- ret = phy_driver_register(&at8030_driver);
- if (ret)
- goto err2;
-
- return 0;
-
-err2:
- phy_driver_unregister(&at8035_driver);
-err1:
- return ret;
+ return phy_drivers_register(at803x_driver,
+ ARRAY_SIZE(at803x_driver));
}
static void __exit atheros_exit(void)
{
- phy_driver_unregister(&at8035_driver);
- phy_driver_unregister(&at8030_driver);
+ return phy_drivers_unregister(at803x_driver,
+ ARRAY_SIZE(at803x_driver));
}
module_init(atheros_init);
diff --git a/drivers/net/phy/bcm63xx.c b/drivers/net/phy/bcm63xx.c
index 84c7a39b1c65..ac55b0807853 100644
--- a/drivers/net/phy/bcm63xx.c
+++ b/drivers/net/phy/bcm63xx.c
@@ -78,7 +78,7 @@ static struct phy_driver bcm63xx_driver[] = {
.name = "Broadcom BCM63XX (1)",
/* ASYM_PAUSE bit is marked RO in datasheet, so don't cheat */
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
- .flags = PHY_HAS_INTERRUPT,
+ .flags = PHY_HAS_INTERRUPT | PHY_IS_INTERNAL,
.config_init = bcm63xx_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
@@ -91,7 +91,7 @@ static struct phy_driver bcm63xx_driver[] = {
.phy_id_mask = 0xfffffc00,
.name = "Broadcom BCM63XX (2)",
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
- .flags = PHY_HAS_INTERRUPT,
+ .flags = PHY_HAS_INTERRUPT | PHY_IS_INTERNAL,
.config_init = bcm63xx_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 202fe1ff1987..2e91477362d4 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -116,6 +116,8 @@
#define MII_M1011_PHY_STATUS_RESOLVED 0x0800
#define MII_M1011_PHY_STATUS_LINK 0x0400
+#define MII_M1116R_CONTROL_REG_MAC 21
+
MODULE_DESCRIPTION("Marvell PHY driver");
MODULE_AUTHOR("Andy Fleming");
@@ -372,6 +374,66 @@ static int m88e1318_config_aneg(struct phy_device *phydev)
return m88e1121_config_aneg(phydev);
}
+static int m88e1510_config_aneg(struct phy_device *phydev)
+{
+ int err;
+
+ err = m88e1318_config_aneg(phydev);
+ if (err < 0)
+ return err;
+
+ return marvell_of_reg_init(phydev);
+}
+
+static int m88e1116r_config_init(struct phy_device *phydev)
+{
+ int temp;
+ int err;
+
+ temp = phy_read(phydev, MII_BMCR);
+ temp |= BMCR_RESET;
+ err = phy_write(phydev, MII_BMCR, temp);
+ if (err < 0)
+ return err;
+
+ mdelay(500);
+
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0);
+ if (err < 0)
+ return err;
+
+ temp = phy_read(phydev, MII_M1011_PHY_SCR);
+ temp |= (7 << 12); /* max number of gigabit attempts */
+ temp |= (1 << 11); /* enable downshift */
+ temp |= MII_M1011_PHY_SCR_AUTO_CROSS;
+ err = phy_write(phydev, MII_M1011_PHY_SCR, temp);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 2);
+ if (err < 0)
+ return err;
+ temp = phy_read(phydev, MII_M1116R_CONTROL_REG_MAC);
+ temp |= (1 << 5);
+ temp |= (1 << 4);
+ err = phy_write(phydev, MII_M1116R_CONTROL_REG_MAC, temp);
+ if (err < 0)
+ return err;
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0);
+ if (err < 0)
+ return err;
+
+ temp = phy_read(phydev, MII_BMCR);
+ temp |= BMCR_RESET;
+ err = phy_write(phydev, MII_BMCR, temp);
+ if (err < 0)
+ return err;
+
+ mdelay(500);
+
+ return 0;
+}
+
static int m88e1111_config_init(struct phy_device *phydev)
{
int err;
@@ -940,6 +1002,32 @@ static struct phy_driver marvell_drivers[] = {
.config_intr = &marvell_config_intr,
.driver = { .owner = THIS_MODULE },
},
+ {
+ .phy_id = MARVELL_PHY_ID_88E1116R,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .name = "Marvell 88E1116R",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &m88e1116r_config_init,
+ .config_aneg = &genphy_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .driver = { .owner = THIS_MODULE },
+ },
+ {
+ .phy_id = MARVELL_PHY_ID_88E1510,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .name = "Marvell 88E1510",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_aneg = &m88e1510_config_aneg,
+ .read_status = &marvell_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .did_interrupt = &m88e1121_did_interrupt,
+ .driver = { .owner = THIS_MODULE },
+ },
};
static int __init marvell_init(void)
@@ -958,15 +1046,17 @@ module_init(marvell_init);
module_exit(marvell_exit);
static struct mdio_device_id __maybe_unused marvell_tbl[] = {
- { 0x01410c60, 0xfffffff0 },
- { 0x01410c90, 0xfffffff0 },
- { 0x01410cc0, 0xfffffff0 },
- { 0x01410e10, 0xfffffff0 },
- { 0x01410cb0, 0xfffffff0 },
- { 0x01410cd0, 0xfffffff0 },
- { 0x01410e50, 0xfffffff0 },
- { 0x01410e30, 0xfffffff0 },
- { 0x01410e90, 0xfffffff0 },
+ { MARVELL_PHY_ID_88E1101, MARVELL_PHY_ID_MASK },
+ { MARVELL_PHY_ID_88E1112, MARVELL_PHY_ID_MASK },
+ { MARVELL_PHY_ID_88E1111, MARVELL_PHY_ID_MASK },
+ { MARVELL_PHY_ID_88E1118, MARVELL_PHY_ID_MASK },
+ { MARVELL_PHY_ID_88E1121R, MARVELL_PHY_ID_MASK },
+ { MARVELL_PHY_ID_88E1145, MARVELL_PHY_ID_MASK },
+ { MARVELL_PHY_ID_88E1149R, MARVELL_PHY_ID_MASK },
+ { MARVELL_PHY_ID_88E1240, MARVELL_PHY_ID_MASK },
+ { MARVELL_PHY_ID_88E1318S, MARVELL_PHY_ID_MASK },
+ { MARVELL_PHY_ID_88E1116R, MARVELL_PHY_ID_MASK },
+ { MARVELL_PHY_ID_88E1510, MARVELL_PHY_ID_MASK },
{ }
};
diff --git a/drivers/net/phy/mdio-sun4i.c b/drivers/net/phy/mdio-sun4i.c
new file mode 100644
index 000000000000..61d3f4ebf52e
--- /dev/null
+++ b/drivers/net/phy/mdio-sun4i.c
@@ -0,0 +1,194 @@
+/*
+ * Allwinner EMAC MDIO interface driver
+ *
+ * Copyright 2012-2013 Stefan Roese <sr@denx.de>
+ * Copyright 2013 Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * Based on the Linux driver provided by Allwinner:
+ * Copyright (C) 1997 Sten Wang
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_address.h>
+#include <linux/of_mdio.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+
+#define EMAC_MAC_MCMD_REG (0x00)
+#define EMAC_MAC_MADR_REG (0x04)
+#define EMAC_MAC_MWTD_REG (0x08)
+#define EMAC_MAC_MRDD_REG (0x0c)
+#define EMAC_MAC_MIND_REG (0x10)
+#define EMAC_MAC_SSRR_REG (0x14)
+
+#define MDIO_TIMEOUT (msecs_to_jiffies(100))
+
+struct sun4i_mdio_data {
+ void __iomem *membase;
+ struct regulator *regulator;
+};
+
+static int sun4i_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
+{
+ struct sun4i_mdio_data *data = bus->priv;
+ unsigned long start_jiffies;
+ int value;
+
+ /* issue the phy address and reg */
+ writel((mii_id << 8) | regnum, data->membase + EMAC_MAC_MADR_REG);
+ /* pull up the phy io line */
+ writel(0x1, data->membase + EMAC_MAC_MCMD_REG);
+
+ /* Wait read complete */
+ start_jiffies = jiffies;
+ while (readl(data->membase + EMAC_MAC_MIND_REG) & 0x1) {
+ if (time_after(start_jiffies,
+ start_jiffies + MDIO_TIMEOUT))
+ return -ETIMEDOUT;
+ msleep(1);
+ }
+
+ /* push down the phy io line */
+ writel(0x0, data->membase + EMAC_MAC_MCMD_REG);
+ /* and read data */
+ value = readl(data->membase + EMAC_MAC_MRDD_REG);
+
+ return value;
+}
+
+static int sun4i_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
+ u16 value)
+{
+ struct sun4i_mdio_data *data = bus->priv;
+ unsigned long start_jiffies;
+
+ /* issue the phy address and reg */
+ writel((mii_id << 8) | regnum, data->membase + EMAC_MAC_MADR_REG);
+ /* pull up the phy io line */
+ writel(0x1, data->membase + EMAC_MAC_MCMD_REG);
+
+ /* Wait read complete */
+ start_jiffies = jiffies;
+ while (readl(data->membase + EMAC_MAC_MIND_REG) & 0x1) {
+ if (time_after(start_jiffies,
+ start_jiffies + MDIO_TIMEOUT))
+ return -ETIMEDOUT;
+ msleep(1);
+ }
+
+ /* push down the phy io line */
+ writel(0x0, data->membase + EMAC_MAC_MCMD_REG);
+ /* and write data */
+ writel(value, data->membase + EMAC_MAC_MWTD_REG);
+
+ return 0;
+}
+
+static int sun4i_mdio_reset(struct mii_bus *bus)
+{
+ return 0;
+}
+
+static int sun4i_mdio_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct mii_bus *bus;
+ struct sun4i_mdio_data *data;
+ int ret, i;
+
+ bus = mdiobus_alloc_size(sizeof(*data));
+ if (!bus)
+ return -ENOMEM;
+
+ bus->name = "sun4i_mii_bus";
+ bus->read = &sun4i_mdio_read;
+ bus->write = &sun4i_mdio_write;
+ bus->reset = &sun4i_mdio_reset;
+ snprintf(bus->id, MII_BUS_ID_SIZE, "%s-mii", dev_name(&pdev->dev));
+ bus->parent = &pdev->dev;
+
+ bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
+ if (!bus->irq) {
+ ret = -ENOMEM;
+ goto err_out_free_mdiobus;
+ }
+
+ for (i = 0; i < PHY_MAX_ADDR; i++)
+ bus->irq[i] = PHY_POLL;
+
+ data = bus->priv;
+ data->membase = of_iomap(np, 0);
+ if (!data->membase) {
+ ret = -ENOMEM;
+ goto err_out_free_mdio_irq;
+ }
+
+ data->regulator = devm_regulator_get(&pdev->dev, "phy");
+ if (IS_ERR(data->regulator)) {
+ if (PTR_ERR(data->regulator) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
+ dev_info(&pdev->dev, "no regulator found\n");
+ } else {
+ ret = regulator_enable(data->regulator);
+ if (ret)
+ goto err_out_free_mdio_irq;
+ }
+
+ ret = of_mdiobus_register(bus, np);
+ if (ret < 0)
+ goto err_out_disable_regulator;
+
+ platform_set_drvdata(pdev, bus);
+
+ return 0;
+
+err_out_disable_regulator:
+ regulator_disable(data->regulator);
+err_out_free_mdio_irq:
+ kfree(bus->irq);
+err_out_free_mdiobus:
+ mdiobus_free(bus);
+ return ret;
+}
+
+static int sun4i_mdio_remove(struct platform_device *pdev)
+{
+ struct mii_bus *bus = platform_get_drvdata(pdev);
+
+ mdiobus_unregister(bus);
+ kfree(bus->irq);
+ mdiobus_free(bus);
+
+ return 0;
+}
+
+static const struct of_device_id sun4i_mdio_dt_ids[] = {
+ { .compatible = "allwinner,sun4i-mdio" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, sun4i_mdio_dt_ids);
+
+static struct platform_driver sun4i_mdio_driver = {
+ .probe = sun4i_mdio_probe,
+ .remove = sun4i_mdio_remove,
+ .driver = {
+ .name = "sun4i-mdio",
+ .of_match_table = sun4i_mdio_dt_ids,
+ },
+};
+
+module_platform_driver(sun4i_mdio_driver);
+
+MODULE_DESCRIPTION("Allwinner EMAC MDIO interface driver");
+MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 663d2d0448b7..36c6994436b7 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -294,7 +294,8 @@ int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd)
cmd->duplex = phydev->duplex;
cmd->port = PORT_MII;
cmd->phy_address = phydev->addr;
- cmd->transceiver = XCVR_EXTERNAL;
+ cmd->transceiver = phy_is_internal(phydev) ?
+ XCVR_INTERNAL : XCVR_EXTERNAL;
cmd->autoneg = phydev->autoneg;
return 0;
@@ -419,8 +420,6 @@ out_unlock:
EXPORT_SYMBOL(phy_start_aneg);
-static void phy_change(struct work_struct *work);
-
/**
* phy_start_machine - start PHY state machine tracking
* @phydev: the phy_device struct
@@ -565,8 +564,6 @@ int phy_start_interrupts(struct phy_device *phydev)
{
int err = 0;
- INIT_WORK(&phydev->phy_queue, phy_change);
-
atomic_set(&phydev->irq_disable, 0);
if (request_irq(phydev->irq, phy_interrupt,
IRQF_SHARED,
@@ -623,7 +620,7 @@ EXPORT_SYMBOL(phy_stop_interrupts);
* phy_change - Scheduled by the phy_interrupt/timer to handle PHY changes
* @work: work_struct that describes the work to be done
*/
-static void phy_change(struct work_struct *work)
+void phy_change(struct work_struct *work)
{
int err;
struct phy_device *phydev =
@@ -682,7 +679,7 @@ void phy_stop(struct phy_device *phydev)
if (PHY_HALTED == phydev->state)
goto out_unlock;
- if (phydev->irq != PHY_POLL) {
+ if (phy_interrupt_is_valid(phydev)) {
/* Disable PHY Interrupts */
phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED);
@@ -828,8 +825,9 @@ void phy_state_machine(struct work_struct *work)
break;
case PHY_RUNNING:
/* Only register a CHANGE if we are
- * polling */
- if (PHY_POLL == phydev->irq)
+ * polling or ignoring interrupts
+ */
+ if (!phy_interrupt_is_valid(phydev))
phydev->state = PHY_CHANGELINK;
break;
case PHY_CHANGELINK:
@@ -848,7 +846,7 @@ void phy_state_machine(struct work_struct *work)
phydev->adjust_link(phydev->attached_dev);
- if (PHY_POLL != phydev->irq)
+ if (phy_interrupt_is_valid(phydev))
err = phy_config_interrupt(phydev,
PHY_INTERRUPT_ENABLED);
break;
@@ -922,6 +920,14 @@ void phy_state_machine(struct work_struct *work)
PHY_STATE_TIME * HZ);
}
+void phy_mac_interrupt(struct phy_device *phydev, int new_link)
+{
+ cancel_work_sync(&phydev->phy_queue);
+ phydev->link = new_link;
+ schedule_work(&phydev->phy_queue);
+}
+EXPORT_SYMBOL(phy_mac_interrupt);
+
static inline void mmd_phy_indirect(struct mii_bus *bus, int prtad, int devad,
int addr)
{
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 3657b4a29124..74630e94fa3b 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -189,6 +189,7 @@ struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id,
mutex_init(&dev->lock);
INIT_DELAYED_WORK(&dev->state_queue, phy_state_machine);
+ INIT_WORK(&dev->phy_queue, phy_change);
/* Request the appropriate module unconditionally; don't
bother trying to do so only if it isn't already loaded,
@@ -1009,10 +1010,16 @@ static int phy_probe(struct device *dev)
phydrv = to_phy_driver(drv);
phydev->drv = phydrv;
- /* Disable the interrupt if the PHY doesn't support it */
- if (!(phydrv->flags & PHY_HAS_INTERRUPT))
+ /* Disable the interrupt if the PHY doesn't support it
+ * but the interrupt is still a valid one
+ */
+ if (!(phydrv->flags & PHY_HAS_INTERRUPT) &&
+ phy_interrupt_is_valid(phydev))
phydev->irq = PHY_POLL;
+ if (phydrv->flags & PHY_IS_INTERNAL)
+ phydev->is_internal = true;
+
mutex_lock(&phydev->lock);
/* Start out supporting everything. Eventually,
diff --git a/drivers/net/phy/spi_ks8995.c b/drivers/net/phy/spi_ks8995.c
index d11c93e69e03..f3bea1346021 100644
--- a/drivers/net/phy/spi_ks8995.c
+++ b/drivers/net/phy/spi_ks8995.c
@@ -354,19 +354,7 @@ static struct spi_driver ks8995_driver = {
.remove = ks8995_remove,
};
-static int __init ks8995_init(void)
-{
- pr_info(DRV_DESC " version " DRV_VERSION "\n");
-
- return spi_register_driver(&ks8995_driver);
-}
-module_init(ks8995_init);
-
-static void __exit ks8995_exit(void)
-{
- spi_unregister_driver(&ks8995_driver);
-}
-module_exit(ks8995_exit);
+module_spi_driver(ks8995_driver);
MODULE_DESCRIPTION(DRV_DESC);
MODULE_VERSION(DRV_VERSION);
diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c
index 3492b5391273..69b482bce7d2 100644
--- a/drivers/net/phy/vitesse.c
+++ b/drivers/net/phy/vitesse.c
@@ -44,18 +44,19 @@
#define MII_VSC8244_ISTAT_DUPLEX 0x1000
/* Vitesse Auxiliary Control/Status Register */
-#define MII_VSC8244_AUX_CONSTAT 0x1c
-#define MII_VSC8244_AUXCONSTAT_INIT 0x0000
-#define MII_VSC8244_AUXCONSTAT_DUPLEX 0x0020
-#define MII_VSC8244_AUXCONSTAT_SPEED 0x0018
-#define MII_VSC8244_AUXCONSTAT_GBIT 0x0010
-#define MII_VSC8244_AUXCONSTAT_100 0x0008
+#define MII_VSC8244_AUX_CONSTAT 0x1c
+#define MII_VSC8244_AUXCONSTAT_INIT 0x0000
+#define MII_VSC8244_AUXCONSTAT_DUPLEX 0x0020
+#define MII_VSC8244_AUXCONSTAT_SPEED 0x0018
+#define MII_VSC8244_AUXCONSTAT_GBIT 0x0010
+#define MII_VSC8244_AUXCONSTAT_100 0x0008
#define MII_VSC8221_AUXCONSTAT_INIT 0x0004 /* need to set this bit? */
#define MII_VSC8221_AUXCONSTAT_RESERVED 0x0004
#define PHY_ID_VSC8244 0x000fc6c0
#define PHY_ID_VSC8221 0x000fc550
+#define PHY_ID_VSC8211 0x000fc4b0
MODULE_DESCRIPTION("Vitesse PHY driver");
MODULE_AUTHOR("Kriston Carson");
@@ -100,9 +101,8 @@ static int vsc824x_config_init(struct phy_device *phydev)
static int vsc824x_ack_interrupt(struct phy_device *phydev)
{
int err = 0;
-
- /*
- * Don't bother to ACK the interrupts if interrupts
+
+ /* Don't bother to ACK the interrupts if interrupts
* are disabled. The 824x cannot clear the interrupts
* if they are disabled.
*/
@@ -122,8 +122,7 @@ static int vsc82xx_config_intr(struct phy_device *phydev)
MII_VSC8244_IMASK_MASK :
MII_VSC8221_IMASK_MASK);
else {
- /*
- * The Vitesse PHY cannot clear the interrupt
+ /* The Vitesse PHY cannot clear the interrupt
* once it has disabled them, so we clear them first
*/
err = phy_read(phydev, MII_VSC8244_ISTAT);
@@ -146,7 +145,8 @@ static int vsc8221_config_init(struct phy_device *phydev)
return err;
/* Perhaps we should set EXT_CON1 based on the interface?
- Options are 802.3Z SerDes or SGMII */
+ * Options are 802.3Z SerDes or SGMII
+ */
}
/* Vitesse 824x */
@@ -176,6 +176,19 @@ static struct phy_driver vsc82xx_driver[] = {
.ack_interrupt = &vsc824x_ack_interrupt,
.config_intr = &vsc82xx_config_intr,
.driver = { .owner = THIS_MODULE,},
+}, {
+ /* Vitesse 8211 */
+ .phy_id = PHY_ID_VSC8211,
+ .phy_id_mask = 0x000ffff0,
+ .name = "Vitesse VSC8211",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &vsc8221_config_init,
+ .config_aneg = &genphy_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &vsc824x_ack_interrupt,
+ .config_intr = &vsc82xx_config_intr,
+ .driver = { .owner = THIS_MODULE,},
} };
static int __init vsc82xx_init(void)
@@ -196,6 +209,7 @@ module_exit(vsc82xx_exit);
static struct mdio_device_id __maybe_unused vitesse_tbl[] = {
{ PHY_ID_VSC8244, 0x000fffc0 },
{ PHY_ID_VSC8221, 0x000ffff0 },
+ { PHY_ID_VSC8211, 0x000ffff0 },
{ }
};
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 07:58:28 +0000