diff options
Diffstat (limited to 'drivers/mfd/wm8350-core.c')
-rw-r--r-- | drivers/mfd/wm8350-core.c | 456 |
1 files changed, 456 insertions, 0 deletions
diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c new file mode 100644 index 000000000000..c7552c0b7797 --- /dev/null +++ b/drivers/mfd/wm8350-core.c @@ -0,0 +1,456 @@ +/* + * wm8350-core.c -- Device access for Wolfson WM8350 + * + * Copyright 2007, 2008 Wolfson Microelectronics PLC. + * + * Author: Liam Girdwood, Mark Brown + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/interrupt.h> + +#include <linux/mfd/wm8350/core.h> +#include <linux/mfd/wm8350/audio.h> +#include <linux/mfd/wm8350/gpio.h> +#include <linux/mfd/wm8350/pmic.h> +#include <linux/mfd/wm8350/supply.h> + +#define WM8350_UNLOCK_KEY 0x0013 +#define WM8350_LOCK_KEY 0x0000 + +#define WM8350_CLOCK_CONTROL_1 0x28 +#define WM8350_AIF_TEST 0x74 + +/* debug */ +#define WM8350_BUS_DEBUG 0 +#if WM8350_BUS_DEBUG +#define dump(regs, src) do { \ + int i_; \ + u16 *src_ = src; \ + printk(KERN_DEBUG); \ + for (i_ = 0; i_ < regs; i_++) \ + printk(" 0x%4.4x", *src_++); \ + printk("\n"); \ +} while (0); +#else +#define dump(bytes, src) +#endif + +#define WM8350_LOCK_DEBUG 0 +#if WM8350_LOCK_DEBUG +#define ldbg(format, arg...) printk(format, ## arg) +#else +#define ldbg(format, arg...) +#endif + +/* + * WM8350 Device IO + */ +static DEFINE_MUTEX(io_mutex); +static DEFINE_MUTEX(reg_lock_mutex); +static DEFINE_MUTEX(auxadc_mutex); + +/* Perform a physical read from the device. + */ +static int wm8350_phys_read(struct wm8350 *wm8350, u8 reg, int num_regs, + u16 *dest) +{ + int i, ret; + int bytes = num_regs * 2; + + dev_dbg(wm8350->dev, "volatile read\n"); + ret = wm8350->read_dev(wm8350, reg, bytes, (char *)dest); + + for (i = reg; i < reg + num_regs; i++) { + /* Cache is CPU endian */ + dest[i - reg] = be16_to_cpu(dest[i - reg]); + + /* Satisfy non-volatile bits from cache */ + dest[i - reg] &= wm8350_reg_io_map[i].vol; + dest[i - reg] |= wm8350->reg_cache[i]; + + /* Mask out non-readable bits */ + dest[i - reg] &= wm8350_reg_io_map[i].readable; + } + + dump(num_regs, dest); + + return ret; +} + +static int wm8350_read(struct wm8350 *wm8350, u8 reg, int num_regs, u16 *dest) +{ + int i; + int end = reg + num_regs; + int ret = 0; + int bytes = num_regs * 2; + + if (wm8350->read_dev == NULL) + return -ENODEV; + + if ((reg + num_regs - 1) > WM8350_MAX_REGISTER) { + dev_err(wm8350->dev, "invalid reg %x\n", + reg + num_regs - 1); + return -EINVAL; + } + + dev_dbg(wm8350->dev, + "%s R%d(0x%2.2x) %d regs\n", __func__, reg, reg, num_regs); + +#if WM8350_BUS_DEBUG + /* we can _safely_ read any register, but warn if read not supported */ + for (i = reg; i < end; i++) { + if (!wm8350_reg_io_map[i].readable) + dev_warn(wm8350->dev, + "reg R%d is not readable\n", i); + } +#endif + + /* if any volatile registers are required, then read back all */ + for (i = reg; i < end; i++) + if (wm8350_reg_io_map[i].vol) + return wm8350_phys_read(wm8350, reg, num_regs, dest); + + /* no volatiles, then cache is good */ + dev_dbg(wm8350->dev, "cache read\n"); + memcpy(dest, &wm8350->reg_cache[reg], bytes); + dump(num_regs, dest); + return ret; +} + +static inline int is_reg_locked(struct wm8350 *wm8350, u8 reg) +{ + if (reg == WM8350_SECURITY || + wm8350->reg_cache[WM8350_SECURITY] == WM8350_UNLOCK_KEY) + return 0; + + if ((reg == WM8350_GPIO_CONFIGURATION_I_O) || + (reg >= WM8350_GPIO_FUNCTION_SELECT_1 && + reg <= WM8350_GPIO_FUNCTION_SELECT_4) || + (reg >= WM8350_BATTERY_CHARGER_CONTROL_1 && + reg <= WM8350_BATTERY_CHARGER_CONTROL_3)) + return 1; + return 0; +} + +static int wm8350_write(struct wm8350 *wm8350, u8 reg, int num_regs, u16 *src) +{ + int i; + int end = reg + num_regs; + int bytes = num_regs * 2; + + if (wm8350->write_dev == NULL) + return -ENODEV; + + if ((reg + num_regs - 1) > WM8350_MAX_REGISTER) { + dev_err(wm8350->dev, "invalid reg %x\n", + reg + num_regs - 1); + return -EINVAL; + } + + /* it's generally not a good idea to write to RO or locked registers */ + for (i = reg; i < end; i++) { + if (!wm8350_reg_io_map[i].writable) { + dev_err(wm8350->dev, + "attempted write to read only reg R%d\n", i); + return -EINVAL; + } + + if (is_reg_locked(wm8350, i)) { + dev_err(wm8350->dev, + "attempted write to locked reg R%d\n", i); + return -EINVAL; + } + + src[i - reg] &= wm8350_reg_io_map[i].writable; + + wm8350->reg_cache[i] = + (wm8350->reg_cache[i] & ~wm8350_reg_io_map[i].writable) + | src[i - reg]; + + src[i - reg] = cpu_to_be16(src[i - reg]); + } + + /* Actually write it out */ + return wm8350->write_dev(wm8350, reg, bytes, (char *)src); +} + +/* + * Safe read, modify, write methods + */ +int wm8350_clear_bits(struct wm8350 *wm8350, u16 reg, u16 mask) +{ + u16 data; + int err; + + mutex_lock(&io_mutex); + err = wm8350_read(wm8350, reg, 1, &data); + if (err) { + dev_err(wm8350->dev, "read from reg R%d failed\n", reg); + goto out; + } + + data &= ~mask; + err = wm8350_write(wm8350, reg, 1, &data); + if (err) + dev_err(wm8350->dev, "write to reg R%d failed\n", reg); +out: + mutex_unlock(&io_mutex); + return err; +} +EXPORT_SYMBOL_GPL(wm8350_clear_bits); + +int wm8350_set_bits(struct wm8350 *wm8350, u16 reg, u16 mask) +{ + u16 data; + int err; + + mutex_lock(&io_mutex); + err = wm8350_read(wm8350, reg, 1, &data); + if (err) { + dev_err(wm8350->dev, "read from reg R%d failed\n", reg); + goto out; + } + + data |= mask; + err = wm8350_write(wm8350, reg, 1, &data); + if (err) + dev_err(wm8350->dev, "write to reg R%d failed\n", reg); +out: + mutex_unlock(&io_mutex); + return err; +} +EXPORT_SYMBOL_GPL(wm8350_set_bits); + +u16 wm8350_reg_read(struct wm8350 *wm8350, int reg) +{ + u16 data; + int err; + + mutex_lock(&io_mutex); + err = wm8350_read(wm8350, reg, 1, &data); + if (err) + dev_err(wm8350->dev, "read from reg R%d failed\n", reg); + + mutex_unlock(&io_mutex); + return data; +} +EXPORT_SYMBOL_GPL(wm8350_reg_read); + +int wm8350_reg_write(struct wm8350 *wm8350, int reg, u16 val) +{ + int ret; + u16 data = val; + + mutex_lock(&io_mutex); + ret = wm8350_write(wm8350, reg, 1, &data); + if (ret) + dev_err(wm8350->dev, "write to reg R%d failed\n", reg); + mutex_unlock(&io_mutex); + return ret; +} +EXPORT_SYMBOL_GPL(wm8350_reg_write); + +int wm8350_block_read(struct wm8350 *wm8350, int start_reg, int regs, + u16 *dest) +{ + int err = 0; + + mutex_lock(&io_mutex); + err = wm8350_read(wm8350, start_reg, regs, dest); + if (err) + dev_err(wm8350->dev, "block read starting from R%d failed\n", + start_reg); + mutex_unlock(&io_mutex); + return err; +} +EXPORT_SYMBOL_GPL(wm8350_block_read); + +int wm8350_block_write(struct wm8350 *wm8350, int start_reg, int regs, + u16 *src) +{ + int ret = 0; + + mutex_lock(&io_mutex); + ret = wm8350_write(wm8350, start_reg, regs, src); + if (ret) + dev_err(wm8350->dev, "block write starting at R%d failed\n", + start_reg); + mutex_unlock(&io_mutex); + return ret; +} +EXPORT_SYMBOL_GPL(wm8350_block_write); + +int wm8350_reg_lock(struct wm8350 *wm8350) +{ + u16 key = WM8350_LOCK_KEY; + int ret; + + ldbg(__func__); + mutex_lock(&io_mutex); + ret = wm8350_write(wm8350, WM8350_SECURITY, 1, &key); + if (ret) + dev_err(wm8350->dev, "lock failed\n"); + mutex_unlock(&io_mutex); + return ret; +} +EXPORT_SYMBOL_GPL(wm8350_reg_lock); + +int wm8350_reg_unlock(struct wm8350 *wm8350) +{ + u16 key = WM8350_UNLOCK_KEY; + int ret; + + ldbg(__func__); + mutex_lock(&io_mutex); + ret = wm8350_write(wm8350, WM8350_SECURITY, 1, &key); + if (ret) + dev_err(wm8350->dev, "unlock failed\n"); + mutex_unlock(&io_mutex); + return ret; +} +EXPORT_SYMBOL_GPL(wm8350_reg_unlock); + +/* + * Cache is always host endian. + */ +static int wm8350_create_cache(struct wm8350 *wm8350, int mode) +{ + int i, ret = 0; + u16 value; + const u16 *reg_map; + + switch (mode) { +#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_0 + case 0: + reg_map = wm8350_mode0_defaults; + break; +#endif +#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_1 + case 1: + reg_map = wm8350_mode1_defaults; + break; +#endif +#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_2 + case 2: + reg_map = wm8350_mode2_defaults; + break; +#endif +#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_3 + case 3: + reg_map = wm8350_mode3_defaults; + break; +#endif + default: + dev_err(wm8350->dev, "Configuration mode %d not supported\n", + mode); + return -EINVAL; + } + + wm8350->reg_cache = + kzalloc(sizeof(u16) * (WM8350_MAX_REGISTER + 1), GFP_KERNEL); + if (wm8350->reg_cache == NULL) + return -ENOMEM; + + /* Read the initial cache state back from the device - this is + * a PMIC so the device many not be in a virgin state and we + * can't rely on the silicon values. + */ + for (i = 0; i < WM8350_MAX_REGISTER; i++) { + /* audio register range */ + if (wm8350_reg_io_map[i].readable && + (i < WM8350_CLOCK_CONTROL_1 || i > WM8350_AIF_TEST)) { + ret = wm8350->read_dev(wm8350, i, 2, (char *)&value); + if (ret < 0) { + dev_err(wm8350->dev, + "failed to read initial cache value\n"); + goto out; + } + value = be16_to_cpu(value); + value &= wm8350_reg_io_map[i].readable; + wm8350->reg_cache[i] = value; + } else + wm8350->reg_cache[i] = reg_map[i]; + } + +out: + return ret; +} +EXPORT_SYMBOL_GPL(wm8350_create_cache); + +int wm8350_device_init(struct wm8350 *wm8350) +{ + int ret = -EINVAL; + u16 id1, id2, mask, mode; + + /* get WM8350 revision and config mode */ + wm8350->read_dev(wm8350, WM8350_RESET_ID, sizeof(id1), &id1); + wm8350->read_dev(wm8350, WM8350_ID, sizeof(id2), &id2); + + id1 = be16_to_cpu(id1); + id2 = be16_to_cpu(id2); + + if (id1 == 0x0) + dev_info(wm8350->dev, "Found Rev C device\n"); + else if (id1 == 0x6143) { + switch ((id2 & WM8350_CHIP_REV_MASK) >> 12) { + case WM8350_REV_E: + dev_info(wm8350->dev, "Found Rev E device\n"); + wm8350->rev = WM8350_REV_E; + break; + case WM8350_REV_F: + dev_info(wm8350->dev, "Found Rev F device\n"); + wm8350->rev = WM8350_REV_F; + break; + case WM8350_REV_G: + dev_info(wm8350->dev, "Found Rev G device\n"); + wm8350->rev = WM8350_REV_G; + break; + default: + /* For safety we refuse to run on unknown hardware */ + dev_info(wm8350->dev, "Found unknown rev\n"); + ret = -ENODEV; + goto err; + } + } else { + dev_info(wm8350->dev, "Device with ID %x is not a WM8350\n", + id1); + ret = -ENODEV; + goto err; + } + + mode = id2 & WM8350_CONF_STS_MASK >> 10; + mask = id2 & WM8350_CUST_ID_MASK; + dev_info(wm8350->dev, "Config mode %d, ROM mask %d\n", mode, mask); + + ret = wm8350_create_cache(wm8350, mode); + if (ret < 0) { + printk(KERN_ERR "wm8350: failed to create register cache\n"); + return ret; + } + + return 0; + +err: + kfree(wm8350->reg_cache); + return ret; +} +EXPORT_SYMBOL_GPL(wm8350_device_init); + +void wm8350_device_exit(struct wm8350 *wm8350) +{ + kfree(wm8350->reg_cache); +} +EXPORT_SYMBOL_GPL(wm8350_device_exit); + +MODULE_LICENSE("GPL"); |