Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (56 commits)
  sky2: Fix oops in sky2_xmit_frame() after TX timeout
  Documentation/3c509: document ethtool support
  af_packet: Don't use skb after dev_queue_xmit()
  vxge: use pci_dma_mapping_error to test return value
  netfilter: ebtables: enforce CAP_NET_ADMIN
  e1000e: fix and commonize code for setting the receive address registers
  e1000e: e1000e_enable_tx_pkt_filtering() returns wrong value
  e1000e: perform 10/100 adaptive IFS only on parts that support it
  e1000e: don't accumulate PHY statistics on PHY read failure
  e1000e: call pci_save_state() after pci_restore_state()
  netxen: update version to 4.0.72
  netxen: fix set mac addr
  netxen: fix smatch warning
  netxen: fix tx ring memory leak
  tcp: update the netstamp_needed counter when cloning sockets
  TI DaVinci EMAC: Handle emac module clock correctly.
  dmfe/tulip: Let dmfe handle DM910x except for SPARC on-board chips
  ixgbe: Fix compiler warning about variable being used uninitialized
  netfilter: nf_ct_ftp: fix out of bounds read in update_nl_seq()
  mv643xx_eth: don't include cache padding in rx desc buffer size
  ...

Fix trivial conflict in drivers/scsi/cxgb3i/cxgb3i_offload.c

3 files changed, 81 insertions, 25 deletions

diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index c13cf64095b6..33c4b12a63ba 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -331,8 +331,8 @@ static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev)
 	bool clk125en = true;
 
 	/* Abort if we are using an untested phy. */
-	if (BRCM_PHY_MODEL(phydev) != PHY_ID_BCM57780 ||
-	    BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610 ||
+	if (BRCM_PHY_MODEL(phydev) != PHY_ID_BCM57780 &&
+	    BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610 &&
 	    BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610M)
 		return;
 
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index bd4e8d72dc08..e17b70291bbc 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -264,6 +264,8 @@ static int mdio_bus_match(struct device *dev, struct device_driver *drv)
 		(phydev->phy_id & phydrv->phy_id_mask));
 }
 
+#ifdef CONFIG_PM
+
 static bool mdio_bus_phy_may_suspend(struct phy_device *phydev)
 {
 	struct device_driver *drv = phydev->dev.driver;
@@ -295,34 +297,88 @@ static bool mdio_bus_phy_may_suspend(struct phy_device *phydev)
 	return true;
 }
 
-/* Suspend and resume.  Copied from platform_suspend and
- * platform_resume
- */
-static int mdio_bus_suspend(struct device * dev, pm_message_t state)
+static int mdio_bus_suspend(struct device *dev)
 {
 	struct phy_driver *phydrv = to_phy_driver(dev->driver);
 	struct phy_device *phydev = to_phy_device(dev);
 
+	/*
+	 * We must stop the state machine manually, otherwise it stops out of
+	 * control, possibly with the phydev->lock held. Upon resume, netdev
+	 * may call phy routines that try to grab the same lock, and that may
+	 * lead to a deadlock.
+	 */
+	if (phydev->attached_dev)
+		phy_stop_machine(phydev);
+
 	if (!mdio_bus_phy_may_suspend(phydev))
 		return 0;
+
 	return phydrv->suspend(phydev);
 }
 
-static int mdio_bus_resume(struct device * dev)
+static int mdio_bus_resume(struct device *dev)
 {
 	struct phy_driver *phydrv = to_phy_driver(dev->driver);
 	struct phy_device *phydev = to_phy_device(dev);
+	int ret;
 
 	if (!mdio_bus_phy_may_suspend(phydev))
+		goto no_resume;
+
+	ret = phydrv->resume(phydev);
+	if (ret < 0)
+		return ret;
+
+no_resume:
+	if (phydev->attached_dev)
+		phy_start_machine(phydev, NULL);
+
+	return 0;
+}
+
+static int mdio_bus_restore(struct device *dev)
+{
+	struct phy_device *phydev = to_phy_device(dev);
+	struct net_device *netdev = phydev->attached_dev;
+	int ret;
+
+	if (!netdev)
 		return 0;
-	return phydrv->resume(phydev);
+
+	ret = phy_init_hw(phydev);
+	if (ret < 0)
+		return ret;
+
+	/* The PHY needs to renegotiate. */
+	phydev->link = 0;
+	phydev->state = PHY_UP;
+
+	phy_start_machine(phydev, NULL);
+
+	return 0;
 }
 
+static struct dev_pm_ops mdio_bus_pm_ops = {
+	.suspend = mdio_bus_suspend,
+	.resume = mdio_bus_resume,
+	.freeze = mdio_bus_suspend,
+	.thaw = mdio_bus_resume,
+	.restore = mdio_bus_restore,
+};
+
+#define MDIO_BUS_PM_OPS (&mdio_bus_pm_ops)
+
+#else
+
+#define MDIO_BUS_PM_OPS NULL
+
+#endif /* CONFIG_PM */
+
 struct bus_type mdio_bus_type = {
 	.name		= "mdio_bus",
 	.match		= mdio_bus_match,
-	.suspend	= mdio_bus_suspend,
-	.resume		= mdio_bus_resume,
+	.pm		= MDIO_BUS_PM_OPS,
 };
 EXPORT_SYMBOL(mdio_bus_type);
 
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index b10fedd82143..8212b2b93422 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -378,6 +378,20 @@ void phy_disconnect(struct phy_device *phydev)
 }
 EXPORT_SYMBOL(phy_disconnect);
 
+int phy_init_hw(struct phy_device *phydev)
+{
+	int ret;
+
+	if (!phydev->drv || !phydev->drv->config_init)
+		return 0;
+
+	ret = phy_scan_fixups(phydev);
+	if (ret < 0)
+		return ret;
+
+	return phydev->drv->config_init(phydev);
+}
+
 /**
  * phy_attach_direct - attach a network device to a given PHY device pointer
  * @dev: network device to attach
@@ -425,21 +439,7 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
 	/* Do initial configuration here, now that
 	 * we have certain key parameters
 	 * (dev_flags and interface) */
-	if (phydev->drv->config_init) {
-		int err;
-
-		err = phy_scan_fixups(phydev);
-
-		if (err < 0)
-			return err;
-
-		err = phydev->drv->config_init(phydev);
-
-		if (err < 0)
-			return err;
-	}
-
-	return 0;
+	return phy_init_hw(phydev);
 }
 EXPORT_SYMBOL(phy_attach_direct);