diff options
author | Yevgeny Petrilin <yevgenyp@mellanox.co.il> | 2008-10-22 15:38:42 -0700 |
---|---|---|
committer | Roland Dreier <rolandd@cisco.com> | 2008-10-22 15:38:42 -0700 |
commit | 7ff93f8b7ecbc36e7ffc5c11a61643821c1bfee5 (patch) | |
tree | 4b38e1ead8b27a480cc766f6927dccf5b63793ae /drivers/net/mlx4/main.c | |
parent | 2a2336f8228292b8197f4187e54b0748903e6645 (diff) |
mlx4_core: Multiple port type support
Multi-protocol adapters support different port types. Each consumer
of mlx4_core queries for supported port types; in particular mlx4_ib
can no longer assume that all physical ports belong to it. Port type
is configured through a sysfs interface. When the type of a port is
changed, all mlx4 interfaces are unregistered, and then registered
again with the new port types.
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Diffstat (limited to 'drivers/net/mlx4/main.c')
-rw-r--r-- | drivers/net/mlx4/main.c | 211 |
1 files changed, 205 insertions, 6 deletions
diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c index 0a5c8bfb3f1f..c1d447873bf1 100644 --- a/drivers/net/mlx4/main.c +++ b/drivers/net/mlx4/main.c @@ -98,6 +98,44 @@ module_param_named(use_prio, use_prio, bool, 0444); MODULE_PARM_DESC(use_prio, "Enable steering by VLAN priority on ETH ports " "(0/1, default 0)"); +static int mlx4_check_port_params(struct mlx4_dev *dev, + enum mlx4_port_type *port_type) +{ + int i; + + for (i = 0; i < dev->caps.num_ports - 1; i++) { + if (port_type[i] != port_type[i+1] && + !(dev->caps.flags & MLX4_DEV_CAP_FLAG_DPDP)) { + mlx4_err(dev, "Only same port types supported " + "on this HCA, aborting.\n"); + return -EINVAL; + } + } + if ((port_type[0] == MLX4_PORT_TYPE_ETH) && + (port_type[1] == MLX4_PORT_TYPE_IB)) { + mlx4_err(dev, "eth-ib configuration is not supported.\n"); + return -EINVAL; + } + + for (i = 0; i < dev->caps.num_ports; i++) { + if (!(port_type[i] & dev->caps.supported_type[i+1])) { + mlx4_err(dev, "Requested port type for port %d is not " + "supported on this HCA\n", i + 1); + return -EINVAL; + } + } + return 0; +} + +static void mlx4_set_port_mask(struct mlx4_dev *dev) +{ + int i; + + dev->caps.port_mask = 0; + for (i = 1; i <= dev->caps.num_ports; ++i) + if (dev->caps.port_type[i] == MLX4_PORT_TYPE_IB) + dev->caps.port_mask |= 1 << (i - 1); +} static int mlx4_dev_cap(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) { int err; @@ -139,6 +177,7 @@ static int mlx4_dev_cap(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) dev->caps.port_width_cap[i] = dev_cap->max_port_width[i]; dev->caps.eth_mtu_cap[i] = dev_cap->eth_mtu[i]; dev->caps.def_mac[i] = dev_cap->def_mac[i]; + dev->caps.supported_type[i] = dev_cap->supported_port_types[i]; } dev->caps.num_uars = dev_cap->uar_size / PAGE_SIZE; @@ -182,6 +221,11 @@ static int mlx4_dev_cap(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) dev->caps.log_num_prios = use_prio ? 3 : 0; for (i = 1; i <= dev->caps.num_ports; ++i) { + if (dev->caps.supported_type[i] != MLX4_PORT_TYPE_ETH) + dev->caps.port_type[i] = MLX4_PORT_TYPE_IB; + else + dev->caps.port_type[i] = MLX4_PORT_TYPE_ETH; + if (dev->caps.log_num_macs > dev_cap->log_max_macs[i]) { dev->caps.log_num_macs = dev_cap->log_max_macs[i]; mlx4_warn(dev, "Requested number of MACs is too much " @@ -196,6 +240,8 @@ static int mlx4_dev_cap(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) } } + mlx4_set_port_mask(dev); + dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW] = dev_cap->reserved_qps; dev->caps.reserved_qps_cnt[MLX4_QP_REGION_ETH_ADDR] = dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FC_ADDR] = @@ -213,6 +259,95 @@ static int mlx4_dev_cap(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) return 0; } +/* + * Change the port configuration of the device. + * Every user of this function must hold the port mutex. + */ +static int mlx4_change_port_types(struct mlx4_dev *dev, + enum mlx4_port_type *port_types) +{ + int err = 0; + int change = 0; + int port; + + for (port = 0; port < dev->caps.num_ports; port++) { + if (port_types[port] != dev->caps.port_type[port + 1]) { + change = 1; + dev->caps.port_type[port + 1] = port_types[port]; + } + } + if (change) { + mlx4_unregister_device(dev); + for (port = 1; port <= dev->caps.num_ports; port++) { + mlx4_CLOSE_PORT(dev, port); + err = mlx4_SET_PORT(dev, port); + if (err) { + mlx4_err(dev, "Failed to set port %d, " + "aborting\n", port); + goto out; + } + } + mlx4_set_port_mask(dev); + err = mlx4_register_device(dev); + } + +out: + return err; +} + +static ssize_t show_port_type(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct mlx4_port_info *info = container_of(attr, struct mlx4_port_info, + port_attr); + struct mlx4_dev *mdev = info->dev; + + return sprintf(buf, "%s\n", + mdev->caps.port_type[info->port] == MLX4_PORT_TYPE_IB ? + "ib" : "eth"); +} + +static ssize_t set_port_type(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct mlx4_port_info *info = container_of(attr, struct mlx4_port_info, + port_attr); + struct mlx4_dev *mdev = info->dev; + struct mlx4_priv *priv = mlx4_priv(mdev); + enum mlx4_port_type types[MLX4_MAX_PORTS]; + int i; + int err = 0; + + if (!strcmp(buf, "ib\n")) + info->tmp_type = MLX4_PORT_TYPE_IB; + else if (!strcmp(buf, "eth\n")) + info->tmp_type = MLX4_PORT_TYPE_ETH; + else { + mlx4_err(mdev, "%s is not supported port type\n", buf); + return -EINVAL; + } + + mutex_lock(&priv->port_mutex); + for (i = 0; i < mdev->caps.num_ports; i++) + types[i] = priv->port[i+1].tmp_type ? priv->port[i+1].tmp_type : + mdev->caps.port_type[i+1]; + + err = mlx4_check_port_params(mdev, types); + if (err) + goto out; + + for (i = 1; i <= mdev->caps.num_ports; i++) + priv->port[i].tmp_type = 0; + + err = mlx4_change_port_types(mdev, types); + +out: + mutex_unlock(&priv->port_mutex); + return err ? err : count; +} + static int mlx4_load_fw(struct mlx4_dev *dev) { struct mlx4_priv *priv = mlx4_priv(dev); @@ -617,6 +752,7 @@ static int mlx4_setup_hca(struct mlx4_dev *dev) { struct mlx4_priv *priv = mlx4_priv(dev); int err; + int port; err = mlx4_init_uar_table(dev); if (err) { @@ -715,8 +851,20 @@ static int mlx4_setup_hca(struct mlx4_dev *dev) goto err_qp_table_free; } + for (port = 1; port <= dev->caps.num_ports; port++) { + err = mlx4_SET_PORT(dev, port); + if (err) { + mlx4_err(dev, "Failed to set port %d, aborting\n", + port); + goto err_mcg_table_free; + } + } + return 0; +err_mcg_table_free: + mlx4_cleanup_mcg_table(dev); + err_qp_table_free: mlx4_cleanup_qp_table(dev); @@ -780,14 +928,37 @@ no_msi: priv->eq_table.eq[i].irq = dev->pdev->irq; } -static void mlx4_init_port_info(struct mlx4_dev *dev, int port) +static int mlx4_init_port_info(struct mlx4_dev *dev, int port) { struct mlx4_port_info *info = &mlx4_priv(dev)->port[port]; + int err = 0; info->dev = dev; info->port = port; mlx4_init_mac_table(dev, &info->mac_table); mlx4_init_vlan_table(dev, &info->vlan_table); + + sprintf(info->dev_name, "mlx4_port%d", port); + info->port_attr.attr.name = info->dev_name; + info->port_attr.attr.mode = S_IRUGO | S_IWUSR; + info->port_attr.show = show_port_type; + info->port_attr.store = set_port_type; + + err = device_create_file(&dev->pdev->dev, &info->port_attr); + if (err) { + mlx4_err(dev, "Failed to create file for port %d\n", port); + info->port = -1; + } + + return err; +} + +static void mlx4_cleanup_port_info(struct mlx4_port_info *info) +{ + if (info->port < 0) + return; + + device_remove_file(&info->dev->pdev->dev, &info->port_attr); } static int __mlx4_init_one(struct pci_dev *pdev, const struct pci_device_id *id) @@ -870,6 +1041,8 @@ static int __mlx4_init_one(struct pci_dev *pdev, const struct pci_device_id *id) INIT_LIST_HEAD(&priv->ctx_list); spin_lock_init(&priv->ctx_lock); + mutex_init(&priv->port_mutex); + INIT_LIST_HEAD(&priv->pgdir_list); mutex_init(&priv->pgdir_mutex); @@ -905,18 +1078,24 @@ static int __mlx4_init_one(struct pci_dev *pdev, const struct pci_device_id *id) if (err) goto err_close; - for (port = 1; port <= dev->caps.num_ports; port++) - mlx4_init_port_info(dev, port); + for (port = 1; port <= dev->caps.num_ports; port++) { + err = mlx4_init_port_info(dev, port); + if (err) + goto err_port; + } err = mlx4_register_device(dev); if (err) - goto err_cleanup; + goto err_port; pci_set_drvdata(pdev, dev); return 0; -err_cleanup: +err_port: + for (port = 1; port <= dev->caps.num_ports; port++) + mlx4_cleanup_port_info(&priv->port[port]); + mlx4_cleanup_mcg_table(dev); mlx4_cleanup_qp_table(dev); mlx4_cleanup_srq_table(dev); @@ -973,8 +1152,10 @@ static void mlx4_remove_one(struct pci_dev *pdev) if (dev) { mlx4_unregister_device(dev); - for (p = 1; p <= dev->caps.num_ports; ++p) + for (p = 1; p <= dev->caps.num_ports; p++) { + mlx4_cleanup_port_info(&priv->port[p]); mlx4_CLOSE_PORT(dev, p); + } mlx4_cleanup_mcg_table(dev); mlx4_cleanup_qp_table(dev); @@ -1026,10 +1207,28 @@ static struct pci_driver mlx4_driver = { .remove = __devexit_p(mlx4_remove_one) }; +static int __init mlx4_verify_params(void) +{ + if ((log_num_mac < 0) || (log_num_mac > 7)) { + printk(KERN_WARNING "mlx4_core: bad num_mac: %d\n", log_num_mac); + return -1; + } + + if ((log_num_vlan < 0) || (log_num_vlan > 7)) { + printk(KERN_WARNING "mlx4_core: bad num_vlan: %d\n", log_num_vlan); + return -1; + } + + return 0; +} + static int __init mlx4_init(void) { int ret; + if (mlx4_verify_params()) + return -EINVAL; + ret = mlx4_catas_init(); if (ret) return ret; |