Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (185 commits)
  powerpc: fix compile error with 85xx/p1010rdb.c
  powerpc: fix compile error with 85xx/p1023_rds.c
  powerpc/fsl: add MSI support for the Freescale hypervisor
  arch/powerpc/sysdev/fsl_rmu.c: introduce missing kfree
  powerpc/fsl: Add support for Integrated Flash Controller
  powerpc/fsl: update compatiable on fsl 16550 uart nodes
  powerpc/85xx: fix PCI and localbus properties in p1022ds.dts
  powerpc/85xx: re-enable ePAPR byte channel driver in corenet32_smp_defconfig
  powerpc/fsl: Update defconfigs to enable some standard FSL HW features
  powerpc: Add TBI PHY node to first MDIO bus
  sbc834x: put full compat string in board match check
  powerpc/fsl-pci: Allow 64-bit PCIe devices to DMA to any memory address
  powerpc: Fix unpaired probe_hcall_entry and probe_hcall_exit
  offb: Fix setting of the pseudo-palette for >8bpp
  offb: Add palette hack for qemu "standard vga" framebuffer
  offb: Fix bug in calculating requested vram size
  powerpc/boot: Change the WARN to INFO for boot wrapper overlap message
  powerpc/44x: Fix build error on currituck platform
  powerpc/boot: Change the load address for the wrapper to fit the kernel
  powerpc/44x: Enable CRASH_DUMP for 440x
  ...

Fix up a trivial conflict in arch/powerpc/include/asm/cputime.h due to
the additional sparse-checking code for cputime_t.

1 files changed, 203 insertions, 25 deletions

diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index 85bb66d7f933..a70bc1e385eb 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -144,6 +144,112 @@ static void pnv_teardown_msi_irqs(struct pci_dev *pdev)
 }
 #endif /* CONFIG_PCI_MSI */
 
+static void pnv_pci_dump_p7ioc_diag_data(struct pnv_phb *phb)
+{
+	struct OpalIoP7IOCPhbErrorData *data = &phb->diag.p7ioc;
+	int i;
+
+	pr_info("PHB %d diagnostic data:\n", phb->hose->global_number);
+
+	pr_info("  brdgCtl              = 0x%08x\n", data->brdgCtl);
+
+	pr_info("  portStatusReg        = 0x%08x\n", data->portStatusReg);
+	pr_info("  rootCmplxStatus      = 0x%08x\n", data->rootCmplxStatus);
+	pr_info("  busAgentStatus       = 0x%08x\n", data->busAgentStatus);
+
+	pr_info("  deviceStatus         = 0x%08x\n", data->deviceStatus);
+	pr_info("  slotStatus           = 0x%08x\n", data->slotStatus);
+	pr_info("  linkStatus           = 0x%08x\n", data->linkStatus);
+	pr_info("  devCmdStatus         = 0x%08x\n", data->devCmdStatus);
+	pr_info("  devSecStatus         = 0x%08x\n", data->devSecStatus);
+
+	pr_info("  rootErrorStatus      = 0x%08x\n", data->rootErrorStatus);
+	pr_info("  uncorrErrorStatus    = 0x%08x\n", data->uncorrErrorStatus);
+	pr_info("  corrErrorStatus      = 0x%08x\n", data->corrErrorStatus);
+	pr_info("  tlpHdr1              = 0x%08x\n", data->tlpHdr1);
+	pr_info("  tlpHdr2              = 0x%08x\n", data->tlpHdr2);
+	pr_info("  tlpHdr3              = 0x%08x\n", data->tlpHdr3);
+	pr_info("  tlpHdr4              = 0x%08x\n", data->tlpHdr4);
+	pr_info("  sourceId             = 0x%08x\n", data->sourceId);
+
+	pr_info("  errorClass           = 0x%016llx\n", data->errorClass);
+	pr_info("  correlator           = 0x%016llx\n", data->correlator);
+
+	pr_info("  p7iocPlssr           = 0x%016llx\n", data->p7iocPlssr);
+	pr_info("  p7iocCsr             = 0x%016llx\n", data->p7iocCsr);
+	pr_info("  lemFir               = 0x%016llx\n", data->lemFir);
+	pr_info("  lemErrorMask         = 0x%016llx\n", data->lemErrorMask);
+	pr_info("  lemWOF               = 0x%016llx\n", data->lemWOF);
+	pr_info("  phbErrorStatus       = 0x%016llx\n", data->phbErrorStatus);
+	pr_info("  phbFirstErrorStatus  = 0x%016llx\n", data->phbFirstErrorStatus);
+	pr_info("  phbErrorLog0         = 0x%016llx\n", data->phbErrorLog0);
+	pr_info("  phbErrorLog1         = 0x%016llx\n", data->phbErrorLog1);
+	pr_info("  mmioErrorStatus      = 0x%016llx\n", data->mmioErrorStatus);
+	pr_info("  mmioFirstErrorStatus = 0x%016llx\n", data->mmioFirstErrorStatus);
+	pr_info("  mmioErrorLog0        = 0x%016llx\n", data->mmioErrorLog0);
+	pr_info("  mmioErrorLog1        = 0x%016llx\n", data->mmioErrorLog1);
+	pr_info("  dma0ErrorStatus      = 0x%016llx\n", data->dma0ErrorStatus);
+	pr_info("  dma0FirstErrorStatus = 0x%016llx\n", data->dma0FirstErrorStatus);
+	pr_info("  dma0ErrorLog0        = 0x%016llx\n", data->dma0ErrorLog0);
+	pr_info("  dma0ErrorLog1        = 0x%016llx\n", data->dma0ErrorLog1);
+	pr_info("  dma1ErrorStatus      = 0x%016llx\n", data->dma1ErrorStatus);
+	pr_info("  dma1FirstErrorStatus = 0x%016llx\n", data->dma1FirstErrorStatus);
+	pr_info("  dma1ErrorLog0        = 0x%016llx\n", data->dma1ErrorLog0);
+	pr_info("  dma1ErrorLog1        = 0x%016llx\n", data->dma1ErrorLog1);
+
+	for (i = 0; i < OPAL_P7IOC_NUM_PEST_REGS; i++) {
+		if ((data->pestA[i] >> 63) == 0 &&
+		    (data->pestB[i] >> 63) == 0)
+			continue;
+		pr_info("  PE[%3d] PESTA        = 0x%016llx\n", i, data->pestA[i]);
+		pr_info("          PESTB        = 0x%016llx\n", data->pestB[i]);
+	}
+}
+
+static void pnv_pci_dump_phb_diag_data(struct pnv_phb *phb)
+{
+	switch(phb->model) {
+	case PNV_PHB_MODEL_P7IOC:
+		pnv_pci_dump_p7ioc_diag_data(phb);
+		break;
+	default:
+		pr_warning("PCI %d: Can't decode this PHB diag data\n",
+			   phb->hose->global_number);
+	}
+}
+
+static void pnv_pci_handle_eeh_config(struct pnv_phb *phb, u32 pe_no)
+{
+	unsigned long flags, rc;
+	int has_diag;
+
+	spin_lock_irqsave(&phb->lock, flags);
+
+	rc = opal_pci_get_phb_diag_data(phb->opal_id, phb->diag.blob, PNV_PCI_DIAG_BUF_SIZE);
+	has_diag = (rc == OPAL_SUCCESS);
+
+	rc = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no,
+				       OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
+	if (rc) {
+		pr_warning("PCI %d: Failed to clear EEH freeze state"
+			   " for PE#%d, err %ld\n",
+			   phb->hose->global_number, pe_no, rc);
+
+		/* For now, let's only display the diag buffer when we fail to clear
+		 * the EEH status. We'll do more sensible things later when we have
+		 * proper EEH support. We need to make sure we don't pollute ourselves
+		 * with the normal errors generated when probing empty slots
+		 */
+		if (has_diag)
+			pnv_pci_dump_phb_diag_data(phb);
+		else
+			pr_warning("PCI %d: No diag data available\n",
+				   phb->hose->global_number);
+	}
+
+	spin_unlock_irqrestore(&phb->lock, flags);
+}
+
 static void pnv_pci_config_check_eeh(struct pnv_phb *phb, struct pci_bus *bus,
 				     u32 bdfn)
 {
@@ -165,15 +271,8 @@ static void pnv_pci_config_check_eeh(struct pnv_phb *phb, struct pci_bus *bus,
 	}
 	cfg_dbg(" -> EEH check, bdfn=%04x PE%d fstate=%x\n",
 		bdfn, pe_no, fstate);
-	if (fstate != 0) {
-		rc = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no,
-					      OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
-		if (rc) {
-			pr_warning("PCI %d: Failed to clear EEH freeze state"
-				   " for PE#%d, err %lld\n",
-				   phb->hose->global_number, pe_no, rc);
-		}
-	}
+	if (fstate != 0)
+		pnv_pci_handle_eeh_config(phb, pe_no);
 }
 
 static int pnv_pci_read_config(struct pci_bus *bus,
@@ -257,12 +356,54 @@ struct pci_ops pnv_pci_ops = {
 	.write = pnv_pci_write_config,
 };
 
+
+static void pnv_tce_invalidate(struct iommu_table *tbl,
+			       u64 *startp, u64 *endp)
+{
+	u64 __iomem *invalidate = (u64 __iomem *)tbl->it_index;
+	unsigned long start, end, inc;
+
+	start = __pa(startp);
+	end = __pa(endp);
+
+
+	/* BML uses this case for p6/p7/galaxy2: Shift addr and put in node */
+	if (tbl->it_busno) {
+		start <<= 12;
+		end <<= 12;
+		inc = 128 << 12;
+		start |= tbl->it_busno;
+		end |= tbl->it_busno;
+	}
+	/* p7ioc-style invalidation, 2 TCEs per write */
+	else if (tbl->it_type & TCE_PCI_SWINV_PAIR) {
+		start |= (1ull << 63);
+		end |= (1ull << 63);
+		inc = 16;
+	}
+	/* Default (older HW) */
+	else
+		inc = 128;
+
+	end |= inc - 1;		/* round up end to be different than start */
+
+	mb(); /* Ensure above stores are visible */
+	while (start <= end) {
+		__raw_writeq(start, invalidate);
+		start += inc;
+	}
+	/* The iommu layer will do another mb() for us on build() and
+	 * we don't care on free()
+	 */
+}
+
+
 static int pnv_tce_build(struct iommu_table *tbl, long index, long npages,
 			 unsigned long uaddr, enum dma_data_direction direction,
 			 struct dma_attrs *attrs)
 {
 	u64 proto_tce;
-	u64 *tcep;
+	u64 *tcep, *tces;
 	u64 rpn;
 
 	proto_tce = TCE_PCI_READ; // Read allowed
@@ -270,25 +411,33 @@ static int pnv_tce_build(struct iommu_table *tbl, long index, long npages,
 	if (direction != DMA_TO_DEVICE)
 		proto_tce |= TCE_PCI_WRITE;
 
-	tcep = ((u64 *)tbl->it_base) + index;
+	tces = tcep = ((u64 *)tbl->it_base) + index - tbl->it_offset;
+	rpn = __pa(uaddr) >> TCE_SHIFT;
 
-	while (npages--) {
-		/* can't move this out since we might cross LMB boundary */
-		rpn = (virt_to_abs(uaddr)) >> TCE_SHIFT;
-		*tcep = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT;
+	while (npages--)
+		*(tcep++) = proto_tce | (rpn++ << TCE_RPN_SHIFT);
+
+	/* Some implementations won't cache invalid TCEs and thus may not
+	 * need that flush. We'll probably turn it_type into a bit mask
+	 * of flags if that becomes the case
+	 */
+	if (tbl->it_type & TCE_PCI_SWINV_CREATE)
+		pnv_tce_invalidate(tbl, tces, tcep - 1);
 
-		uaddr += TCE_PAGE_SIZE;
-		tcep++;
-	}
 	return 0;
 }
 
 static void pnv_tce_free(struct iommu_table *tbl, long index, long npages)
 {
-	u64 *tcep = ((u64 *)tbl->it_base) + index;
+	u64 *tcep, *tces;
+
+	tces = tcep = ((u64 *)tbl->it_base) + index - tbl->it_offset;
 
 	while (npages--)
 		*(tcep++) = 0;
+
+	if (tbl->it_type & TCE_PCI_SWINV_FREE)
+		pnv_tce_invalidate(tbl, tces, tcep - 1);
 }
 
 void pnv_pci_setup_iommu_table(struct iommu_table *tbl,
@@ -308,13 +457,14 @@ static struct iommu_table * __devinit
 pnv_pci_setup_bml_iommu(struct pci_controller *hose)
 {
 	struct iommu_table *tbl;
-	const __be64 *basep;
+	const __be64 *basep, *swinvp;
 	const __be32 *sizep;
 
 	basep = of_get_property(hose->dn, "linux,tce-base", NULL);
 	sizep = of_get_property(hose->dn, "linux,tce-size", NULL);
 	if (basep == NULL || sizep == NULL) {
-		pr_err("PCI: %s has missing tce entries !\n", hose->dn->full_name);
+		pr_err("PCI: %s has missing tce entries !\n",
+		       hose->dn->full_name);
 		return NULL;
 	}
 	tbl = kzalloc_node(sizeof(struct iommu_table), GFP_KERNEL, hose->node);
@@ -323,6 +473,15 @@ pnv_pci_setup_bml_iommu(struct pci_controller *hose)
 	pnv_pci_setup_iommu_table(tbl, __va(be64_to_cpup(basep)),
 				  be32_to_cpup(sizep), 0);
 	iommu_init_table(tbl, hose->node);
+
+	/* Deal with SW invalidated TCEs when needed (BML way) */
+	swinvp = of_get_property(hose->dn, "linux,tce-sw-invalidate-info",
+				 NULL);
+	if (swinvp) {
+		tbl->it_busno = swinvp[1];
+		tbl->it_index = (unsigned long)ioremap(swinvp[0], 8);
+		tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE;
+	}
 	return tbl;
 }
 
@@ -356,6 +515,13 @@ static void __devinit pnv_pci_dma_dev_setup(struct pci_dev *pdev)
 		pnv_pci_dma_fallback_setup(hose, pdev);
 }
 
+/* Fixup wrong class code in p7ioc root complex */
+static void __devinit pnv_p7ioc_rc_quirk(struct pci_dev *dev)
+{
+	dev->class = PCI_CLASS_BRIDGE_PCI << 8;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_IBM, 0x3b9, pnv_p7ioc_rc_quirk);
+
 static int pnv_pci_probe_mode(struct pci_bus *bus)
 {
 	struct pci_controller *hose = pci_bus_to_host(bus);
@@ -400,12 +566,24 @@ void __init pnv_pci_init(void)
 		init_pci_config_tokens();
 		find_and_init_phbs();
 #endif /* CONFIG_PPC_POWERNV_RTAS */
-	} else {
-		/* OPAL is here, do our normal stuff */
+	}
+	/* OPAL is here, do our normal stuff */
+	else {
+		int found_ioda = 0;
+
+		/* Look for IODA IO-Hubs. We don't support mixing IODA
+		 * and p5ioc2 due to the need to change some global
+		 * probing flags
+		 */
+		for_each_compatible_node(np, NULL, "ibm,ioda-hub") {
+			pnv_pci_init_ioda_hub(np);
+			found_ioda = 1;
+		}
 
 		/* Look for p5ioc2 IO-Hubs */
-		for_each_compatible_node(np, NULL, "ibm,p5ioc2")
-			pnv_pci_init_p5ioc2_hub(np);
+		if (!found_ioda)
+			for_each_compatible_node(np, NULL, "ibm,p5ioc2")
+				pnv_pci_init_p5ioc2_hub(np);
 	}
 
 	/* Setup the linkage between OF nodes and PHBs */