Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (185 commits)
  powerpc: fix compile error with 85xx/p1010rdb.c
  powerpc: fix compile error with 85xx/p1023_rds.c
  powerpc/fsl: add MSI support for the Freescale hypervisor
  arch/powerpc/sysdev/fsl_rmu.c: introduce missing kfree
  powerpc/fsl: Add support for Integrated Flash Controller
  powerpc/fsl: update compatiable on fsl 16550 uart nodes
  powerpc/85xx: fix PCI and localbus properties in p1022ds.dts
  powerpc/85xx: re-enable ePAPR byte channel driver in corenet32_smp_defconfig
  powerpc/fsl: Update defconfigs to enable some standard FSL HW features
  powerpc: Add TBI PHY node to first MDIO bus
  sbc834x: put full compat string in board match check
  powerpc/fsl-pci: Allow 64-bit PCIe devices to DMA to any memory address
  powerpc: Fix unpaired probe_hcall_entry and probe_hcall_exit
  offb: Fix setting of the pseudo-palette for >8bpp
  offb: Add palette hack for qemu "standard vga" framebuffer
  offb: Fix bug in calculating requested vram size
  powerpc/boot: Change the WARN to INFO for boot wrapper overlap message
  powerpc/44x: Fix build error on currituck platform
  powerpc/boot: Change the load address for the wrapper to fit the kernel
  powerpc/44x: Enable CRASH_DUMP for 440x
  ...

Fix up a trivial conflict in arch/powerpc/include/asm/cputime.h due to
the additional sparse-checking code for cputime_t.

1 files changed, 270 insertions, 0 deletions

diff --git a/arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi
new file mode 100644
index 000000000000..64e7075a9cd4
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi
@@ -0,0 +1,270 @@
+/*
+ * MPC8568 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,mpc8568-localbus", "fsl,pq3-localbus", "simple-bus";
+	interrupts = <19 2 0 0>;
+	sleep = <&pmc 0x08000000>;
+};
+
+/* controller at 0x8000 */
+&pci0 {
+	compatible = "fsl,mpc8540-pci";
+	device_type = "pci";
+	interrupts = <24 0x2 0 0>;
+	bus-range = <0 0xff>;
+	#interrupt-cells = <1>;
+	#size-cells = <2>;
+	#address-cells = <3>;
+	sleep = <&pmc 0x80000000>;
+};
+
+/* controller at 0xa000 */
+&pci1 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <26 2 0 0>;
+	sleep = <&pmc 0x20000000>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <26 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+			>;
+	};
+};
+
+&rio {
+	compatible = "fsl,srio";
+	interrupts = <48 2 0 0>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+	fsl,srio-rmu-handle = <&rmu>;
+	sleep = <&pmc 0x00080000>;
+	ranges;
+
+	port1 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <1>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,mpc8568-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <10>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,mpc8568-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <17 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,mpc8568-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <18 2 0 0>;
+	};
+
+	i2c-sleep-nexus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		sleep = <&pmc 0x00000004>;
+		ranges;
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+
+	};
+
+	duart-sleep-nexus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		sleep = <&pmc 0x00000002>;
+		ranges;
+
+/include/ "pq3-duart-0.dtsi"
+
+	};
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,mpc8568-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x80000>; // L2, 512K
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+	dma@21300 {
+		sleep = <&pmc 0x00000400>;
+	};
+
+/include/ "pq3-etsec1-0.dtsi"
+	ethernet@24000 {
+		sleep = <&pmc 0x00000080>;
+	};
+
+/include/ "pq3-etsec1-1.dtsi"
+	ethernet@25000 {
+		sleep = <&pmc 0x00000040>;
+	};
+
+	par_io@e0100 {
+		reg = <0xe0100 0x100>;
+		device_type = "par_io";
+	};
+
+/include/ "pq3-sec2.1-0.dtsi"
+	crypto@30000 {
+		sleep = <&pmc 0x01000000>;
+	};
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-rmu-0.dtsi"
+	rmu@d3000 {
+		sleep = <&pmc 0x00040000>;
+	};
+
+	global-utilities@e0000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8568-guts", "fsl,mpc8548-guts";
+		reg = <0xe0000 0x1000>;
+		ranges = <0 0xe0000 0x1000>;
+		fsl,has-rstcr;
+
+		pmc: power@70 {
+			compatible = "fsl,mpc8568-pmc",
+				     "fsl,mpc8548-pmc";
+			reg = <0x70 0x20>;
+		};
+	};
+};
+
+&qe {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "qe";
+	compatible = "fsl,qe";
+	sleep = <&pmc 0x00000800>;
+	brg-frequency = <0>;
+	bus-frequency = <396000000>;
+	fsl,qe-num-riscs = <2>;
+	fsl,qe-num-snums = <28>;
+
+	qeic: interrupt-controller@80 {
+		interrupt-controller;
+		compatible = "fsl,qe-ic";
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x80 0x80>;
+		interrupts = <46 2 0 0 46 2 0 0>; //high:30 low:30
+		interrupt-parent = <&mpic>;
+	};
+
+	spi@4c0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,spi";
+		reg = <0x4c0 0x40>;
+		cell-index = <0>;
+		interrupts = <2>;
+		interrupt-parent = <&qeic>;
+	};
+
+	spi@500 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cell-index = <1>;
+		compatible = "fsl,spi";
+		reg = <0x500 0x40>;
+		interrupts = <1>;
+		interrupt-parent = <&qeic>;
+	};
+
+	ucc@2000 {
+		cell-index = <1>;
+		reg = <0x2000 0x200>;
+		interrupts = <32>;
+		interrupt-parent = <&qeic>;
+	};
+
+	ucc@3000 {
+		cell-index = <2>;
+		reg = <0x3000 0x200>;
+		interrupts = <33>;
+		interrupt-parent = <&qeic>;
+	};
+
+	muram@10000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,qe-muram", "fsl,cpm-muram";
+		ranges = <0x0 0x10000 0x10000>;
+
+		data-only@0 {
+			compatible = "fsl,qe-muram-data",
+				     "fsl,cpm-muram-data";
+			reg = <0x0 0x10000>;
+		};
+	};
+};