Merge remote-tracking branch 'kumar/next' into next

From Kumar Gala:
<<
Add support for T4 and B4 SoC families from Freescale, e6500 altivec
support, some various board fixes and other minor cleanups.
>>

60 files changed, 2735 insertions, 92 deletions

diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt
new file mode 100644
index 000000000000..922c30ad90d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt
@@ -0,0 +1,22 @@
+===================================================================
+Power Architecture CPU Binding
+Copyright 2013 Freescale Semiconductor Inc.
+
+Power Architecture CPUs in Freescale SOCs are represented in device trees as
+per the definition in ePAPR.
+
+In addition to the ePAPR definitions, the properties defined below may be
+present on CPU nodes.
+
+PROPERTIES
+
+   - fsl,eref-*
+        Usage: optional
+        Value type: <empty>
+        Definition: The EREF (EREF: A Programmer.s Reference Manual for
+	Freescale Power Architecture) defines the architecture for Freescale
+	Power CPUs.  The EREF defines some architecture categories not defined
+	by the Power ISA.  For these EREF-specific categories, the existence of
+	a property named fsl,eref-[CAT], where [CAT] is the abbreviated category
+	name with all uppercase letters converted to lowercase, indicates that
+	the category is supported by the implementation.
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index a9ae67317374..84cb0c932153 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -681,7 +681,6 @@ config SBUS
 config FSL_SOC
 	bool
 	select HAVE_CAN_FLEXCAN if NET && CAN
-	select PPC_CLOCK
 
 config FSL_PCI
  	bool
@@ -769,11 +768,6 @@ config PCI_8260
 	select PPC_INDIRECT_PCI
 	default y
 
-config 8260_PCI9
-	bool "Enable workaround for MPC826x erratum PCI 9"
-	depends on PCI_8260 && !8272
-	default y
-
 source "drivers/pci/pcie/Kconfig"
 
 source "drivers/pci/Kconfig"
diff --git a/arch/powerpc/boot/dts/b4420qds.dts b/arch/powerpc/boot/dts/b4420qds.dts
new file mode 100644
index 000000000000..923156d03b30
--- /dev/null
+++ b/arch/powerpc/boot/dts/b4420qds.dts
@@ -0,0 +1,50 @@
+/*
+ * B4420DS Device Tree Source
+ *
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of
+ * this software, even if advised of the possibility of such damage.
+ */
+
+/include/ "fsl/b4420si-pre.dtsi"
+/include/ "b4qds.dts"
+
+/ {
+	model = "fsl,B4420QDS";
+	compatible = "fsl,B4420QDS";
+
+	ifc: localbus@ffe124000 {
+		board-control@3,0 {
+			compatible = "fsl,b4420qds-fpga", "fsl,fpga-qixis";
+		};
+	};
+
+};
+
+/include/ "fsl/b4420si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/b4860qds.dts b/arch/powerpc/boot/dts/b4860qds.dts
new file mode 100644
index 000000000000..78907f38bb77
--- /dev/null
+++ b/arch/powerpc/boot/dts/b4860qds.dts
@@ -0,0 +1,61 @@
+/*
+ * B4860DS Device Tree Source
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/b4860si-pre.dtsi"
+/include/ "b4qds.dts"
+
+/ {
+	model = "fsl,B4860QDS";
+	compatible = "fsl,B4860QDS";
+
+	ifc: localbus@ffe124000 {
+		board-control@3,0 {
+			compatible = "fsl,b4860qds-fpga", "fsl,fpga-qixis";
+		};
+	};
+
+	rio: rapidio@ffe0c0000 {
+		reg = <0xf 0xfe0c0000 0 0x11000>;
+
+		port1 {
+			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+		};
+		port2 {
+			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+		};
+	};
+
+};
+
+/include/ "fsl/b4860si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/b4qds.dts b/arch/powerpc/boot/dts/b4qds.dts
new file mode 100644
index 000000000000..e6d2f8f90544
--- /dev/null
+++ b/arch/powerpc/boot/dts/b4qds.dts
@@ -0,0 +1,169 @@
+/*
+ * B4420DS Device Tree Source
+ *
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of
+ * this software, even if advised of the possibility of such damage.
+ */
+
+/ {
+	model = "fsl,B4QDS";
+	compatible = "fsl,B4QDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	ifc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x2000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xff800000 0x00010000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x2 0x0 0x10000>;
+
+			partition@0 {
+				/* This location must not be altered  */
+				/* 1MB for u-boot Bootloader Image */
+				reg = <0x0 0x00100000>;
+				label = "NAND U-Boot Image";
+				read-only;
+			};
+
+			partition@100000 {
+				/* 1MB for DTB Image */
+				reg = <0x00100000 0x00100000>;
+				label = "NAND DTB Image";
+			};
+
+			partition@200000 {
+				/* 10MB for Linux Kernel Image */
+				reg = <0x00200000 0x00A00000>;
+				label = "NAND Linux Kernel Image";
+			};
+
+			partition@c00000 {
+				/* 500MB for Root file System Image */
+				reg = <0x00c00000 0x1F400000>;
+				label = "NAND RFS Image";
+			};
+		};
+
+		board-control@3,0 {
+			compatible = "fsl,b4qds-fpga", "fsl,fpga-qixis";
+			reg = <3 0 0x300>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01052000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "sst,sst25wf040";
+				reg = <0>;
+				spi-max-frequency = <40000000>; /* input clock */
+			};
+		};
+
+		sdhc@114000 {
+			/*Disabled as there is no sdhc connector on B4420QDS board*/
+			status = "disabled";
+		};
+
+		i2c@118000 {
+			eeprom@50 {
+				compatible = "at24,24c64";
+				reg = <0x50>;
+			};
+			eeprom@51 {
+				compatible = "at24,24c256";
+				reg = <0x51>;
+			};
+			eeprom@53 {
+				compatible = "at24,24c256";
+				reg = <0x53>;
+			};
+			eeprom@57 {
+				compatible = "at24,24c256";
+				reg = <0x57>;
+			};
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+			};
+		};
+
+		usb@210000 {
+			dr_mode = "host";
+			phy_type = "ulpi";
+		};
+
+	};
+
+	pci0: pcie@ffe200000 {
+		reg = <0xf 0xfe200000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+};
+
+/include/ "fsl/b4si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi
new file mode 100644
index 000000000000..5a6615d0ade2
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi
@@ -0,0 +1,98 @@
+/*
+ * B4420 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of
+ * this software, even if advised of the possibility of such damage.
+ */
+
+/include/ "b4si-post.dtsi"
+
+/* controller at 0x200000 */
+&pci0 {
+	compatible = "fsl,b4420-pcie", "fsl,qoriq-pcie-v2.4";
+};
+
+&dcsr {
+	dcsr-epu@0 {
+		compatible = "fsl,b4420-dcsr-epu", "fsl,dcsr-epu";
+	};
+	dcsr-npc {
+		compatible = "fsl,b4420-dcsr-cnpc", "fsl,dcsr-cnpc";
+	};
+	dcsr-dpaa@9000 {
+		compatible = "fsl,b4420-dcsr-dpaa", "fsl,dcsr-dpaa";
+	};
+	dcsr-ocn@11000 {
+		compatible = "fsl,b4420-dcsr-ocn", "fsl,dcsr-ocn";
+	};
+	dcsr-nal@18000 {
+		compatible = "fsl,b4420-dcsr-nal", "fsl,dcsr-nal";
+	};
+	dcsr-rcpm@22000 {
+		compatible = "fsl,b4420-dcsr-rcpm", "fsl,dcsr-rcpm";
+	};
+	dcsr-snpc@30000 {
+		compatible = "fsl,b4420-dcsr-snpc", "fsl,dcsr-snpc";
+	};
+	dcsr-snpc@31000 {
+		compatible = "fsl,b4420-dcsr-snpc", "fsl,dcsr-snpc";
+	};
+	dcsr-cpu-sb-proxy@108000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu1>;
+		reg = <0x108000 0x1000 0x109000 0x1000>;
+	};
+};
+
+&soc {
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,b4420-l3-cache-controller", "cache";
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,b4420-corenet-cf";
+	};
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,b4420-device-config", "fsl,qoriq-device-config-2.0";
+	};
+
+	clockgen: global-utilities@e1000 {
+		compatible = "fsl,b4420-clockgen", "fsl,qoriq-clockgen-2.0";
+	};
+
+	rcpm: global-utilities@e2000 {
+		compatible = "fsl,b4420-rcpm", "fsl,qoriq-rcpm-2.0";
+	};
+
+	L2: l2-cache-controller@c20000 {
+		compatible = "fsl,b4420-l2-cache-controller";
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi b/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
new file mode 100644
index 000000000000..7b4426e0a5a5
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
@@ -0,0 +1,73 @@
+/*
+ * B4420 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of
+ * this software, even if advised of the possibility of such damage.
+ */
+
+/dts-v1/;
+
+/ {
+	compatible = "fsl,B4420";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+		dcsr = &dcsr;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		pci0 = &pci0;
+		dma0 = &dma0;
+		dma1 = &dma1;
+		sdhc = &sdhc;
+	};
+
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e6500@0 {
+			device_type = "cpu";
+			reg = <0 1>;
+			next-level-cache = <&L2>;
+		};
+		cpu1: PowerPC,e6500@2 {
+			device_type = "cpu";
+			reg = <2 3>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
new file mode 100644
index 000000000000..e5cf6c81dd66
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
@@ -0,0 +1,142 @@
+/*
+ * B4860 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "b4si-post.dtsi"
+
+/* controller at 0x200000 */
+&pci0 {
+	compatible = "fsl,b4860-pcie", "fsl,qoriq-pcie-v2.4";
+};
+
+&rio {
+	compatible = "fsl,srio";
+	interrupts = <16 2 1 11>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+	fsl,iommu-parent = <&pamu0>;
+	ranges;
+
+	port1 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <1>;
+		fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */
+	};
+
+	port2 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <2>;
+		fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */
+	};
+};
+
+&dcsr {
+	dcsr-epu@0 {
+		compatible = "fsl,b4860-dcsr-epu", "fsl,dcsr-epu";
+	};
+	dcsr-npc {
+		compatible = "fsl,b4860-dcsr-cnpc", "fsl,dcsr-cnpc";
+	};
+	dcsr-dpaa@9000 {
+		compatible = "fsl,b4860-dcsr-dpaa", "fsl,dcsr-dpaa";
+	};
+	dcsr-ocn@11000 {
+		compatible = "fsl,b4860-dcsr-ocn", "fsl,dcsr-ocn";
+	};
+	dcsr-ddr@13000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr2>;
+		reg = <0x13000 0x1000>;
+	};
+	dcsr-nal@18000 {
+		compatible = "fsl,b4860-dcsr-nal", "fsl,dcsr-nal";
+	};
+	dcsr-rcpm@22000 {
+		compatible = "fsl,b4860-dcsr-rcpm", "fsl,dcsr-rcpm";
+	};
+	dcsr-snpc@30000 {
+		compatible = "fsl,b4860-dcsr-snpc", "fsl,dcsr-snpc";
+	};
+	dcsr-snpc@31000 {
+		compatible = "fsl,b4860-dcsr-snpc", "fsl,dcsr-snpc";
+	};
+	dcsr-cpu-sb-proxy@108000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu1>;
+		reg = <0x108000 0x1000 0x109000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@110000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu2>;
+		reg = <0x110000 0x1000 0x111000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@118000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu3>;
+		reg = <0x118000 0x1000 0x119000 0x1000>;
+	};
+};
+
+&soc {
+	ddr2: memory-controller@9000 {
+		compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+		reg = <0x9000 0x1000>;
+		interrupts = <16 2 1 9>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,b4860-l3-cache-controller", "cache";
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,b4860-corenet-cf";
+	};
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,b4860-device-config", "fsl,qoriq-device-config-2.0";
+	};
+
+	clockgen: global-utilities@e1000 {
+		compatible = "fsl,b4860-clockgen", "fsl,qoriq-clockgen-2.0";
+	};
+
+	rcpm: global-utilities@e2000 {
+		compatible = "fsl,b4860-rcpm", "fsl,qoriq-rcpm-2.0";
+	};
+
+	L2: l2-cache-controller@c20000 {
+		compatible = "fsl,b4860-l2-cache-controller";
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi b/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
new file mode 100644
index 000000000000..5263fa46a3fb
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
@@ -0,0 +1,83 @@
+/*
+ * B4860 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/ {
+	compatible = "fsl,B4860";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+		dcsr = &dcsr;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		pci0 = &pci0;
+		dma0 = &dma0;
+		dma1 = &dma1;
+		sdhc = &sdhc;
+	};
+
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e6500@0 {
+			device_type = "cpu";
+			reg = <0 1>;
+			next-level-cache = <&L2>;
+		};
+		cpu1: PowerPC,e6500@2 {
+			device_type = "cpu";
+			reg = <2 3>;
+			next-level-cache = <&L2>;
+		};
+		cpu2: PowerPC,e6500@4 {
+			device_type = "cpu";
+			reg = <4 5>;
+			next-level-cache = <&L2>;
+		};
+		cpu3: PowerPC,e6500@6 {
+			device_type = "cpu";
+			reg = <6 7>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
new file mode 100644
index 000000000000..73991547c69b
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
@@ -0,0 +1,268 @@
+/*
+ * B4420 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of
+ * this software, even if advised of the possibility of such damage.
+ */
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,ifc", "simple-bus";
+	interrupts = <25 2 0 0>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+	compatible = "fsl,b4-pcie", "fsl,qoriq-pcie-v2.4";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	interrupts = <20 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		reg = <0 0 0 0 0>;
+		interrupts = <20 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 40 1 0 0
+			0000 0 0 2 &mpic 1 1 0 0
+			0000 0 0 3 &mpic 2 1 0 0
+			0000 0 0 4 &mpic 3 1 0 0
+			>;
+	};
+};
+
+&dcsr {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,dcsr", "simple-bus";
+
+	dcsr-epu@0 {
+		compatible = "fsl,b4-dcsr-epu", "fsl,dcsr-epu";
+		interrupts = <52 2 0 0
+			      84 2 0 0
+			      85 2 0 0
+			      94 2 0 0
+			      95 2 0 0>;
+		reg = <0x0 0x1000>;
+	};
+	dcsr-npc {
+		compatible = "fsl,b4-dcsr-cnpc", "fsl,dcsr-cnpc";
+		reg = <0x1000 0x1000 0x1002000 0x10000>;
+	};
+	dcsr-nxc@2000 {
+		compatible = "fsl,dcsr-nxc";
+		reg = <0x2000 0x1000>;
+	};
+	dcsr-corenet {
+		compatible = "fsl,dcsr-corenet";
+		reg = <0x8000 0x1000 0x1A000 0x1000>;
+	};
+	dcsr-dpaa@9000 {
+		compatible = "fsl,b4-dcsr-dpaa", "fsl,dcsr-dpaa";
+		reg = <0x9000 0x1000>;
+	};
+	dcsr-ocn@11000 {
+		compatible = "fsl,b4-dcsr-ocn", "fsl,dcsr-ocn";
+		reg = <0x11000 0x1000>;
+	};
+	dcsr-ddr@12000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr1>;
+		reg = <0x12000 0x1000>;
+	};
+	dcsr-nal@18000 {
+		compatible = "fsl,b4-dcsr-nal", "fsl,dcsr-nal";
+		reg = <0x18000 0x1000>;
+	};
+	dcsr-rcpm@22000 {
+		compatible = "fsl,b4-dcsr-rcpm", "fsl,dcsr-rcpm";
+		reg = <0x22000 0x1000>;
+	};
+	dcsr-snpc@30000 {
+		compatible = "fsl,b4-dcsr-snpc", "fsl,dcsr-snpc";
+		reg = <0x30000 0x1000 0x1022000 0x10000>;
+	};
+	dcsr-snpc@31000 {
+		compatible = "fsl,b4-dcsr-snpc", "fsl,dcsr-snpc";
+		reg = <0x31000 0x1000 0x1042000 0x10000>;
+	};
+	dcsr-cpu-sb-proxy@100000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu0>;
+		reg = <0x100000 0x1000 0x101000 0x1000>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+
+	soc-sram-error {
+		compatible = "fsl,soc-sram-error";
+		interrupts = <16 2 1 2>;
+	};
+
+	corenet-law@0 {
+		compatible = "fsl,corenet-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <32>;
+	};
+
+	ddr1: memory-controller@8000 {
+		compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+		reg = <0x8000 0x1000>;
+		interrupts = <16 2 1 8>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,b4-l3-cache-controller", "cache";
+		reg = <0x10000 0x1000>;
+		interrupts = <16 2 1 4>;
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,b4-corenet-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 0>;
+		fsl,ccf-num-csdids = <32>;
+		fsl,ccf-num-snoopids = <32>;
+	};
+
+	iommu@20000 {
+		compatible =  "fsl,pamu-v1.0", "fsl,pamu";
+		reg = <0x20000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupts = <
+			24 2 0 0
+			16 2 1 1>;
+
+
+		/* PCIe, DMA, SRIO */
+		pamu0: pamu@0 {
+			reg = <0 0x1000>;
+			fsl,primary-cache-geometry = <8 1>;
+			fsl,secondary-cache-geometry = <32 2>;
+		};
+
+		/* AXI2, Maple */
+		pamu1: pamu@1000 {
+			reg = <0x1000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <32 2>;
+		};
+
+		/* Q/BMan */
+		pamu2: pamu@2000 {
+			reg = <0x2000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <32 2>;
+		};
+
+		/* AXI1, FMAN */
+		pamu3: pamu@3000 {
+			reg = <0x3000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <32 2>;
+		};
+	};
+
+/include/ "qoriq-mpic.dtsi"
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,b4-device-config";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		fsl,liodn-bits = <12>;
+	};
+
+	clockgen: global-utilities@e1000 {
+		compatible = "fsl,b4-clockgen", "fsl,qoriq-clockgen-2.0";
+		reg = <0xe1000 0x1000>;
+	};
+
+	rcpm: global-utilities@e2000 {
+		compatible = "fsl,b4-rcpm", "fsl,qoriq-rcpm-2.0";
+		reg = <0xe2000 0x1000>;
+	};
+
+/include/ "qoriq-dma-0.dtsi"
+	dma@100300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
+	};
+
+/include/ "qoriq-dma-1.dtsi"
+	dma@101300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
+	};
+
+/include/ "qonverge-usb2-dr-0.dtsi"
+	usb0: usb@210000 {
+		compatible = "fsl-usb2-dr-v2.4", "fsl-usb2-dr";
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
+	};
+
+/include/ "qoriq-espi-0.dtsi"
+	spi@110000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "qoriq-esdhc-0.dtsi"
+	sdhc@114000 {
+		sdhci,auto-cmd12;
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
+	};
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-sec5.3-0.dtsi"
+
+	L2: l2-cache-controller@c20000 {
+		compatible = "fsl,b4-l2-cache-controller";
+		reg = <0xc20000 0x1000>;
+		next-level-cache = <&cpc>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/e500mc_power_isa.dtsi b/arch/powerpc/boot/dts/fsl/e500mc_power_isa.dtsi
index 870c6535a053..ea145c91cfbd 100644
--- a/arch/powerpc/boot/dts/fsl/e500mc_power_isa.dtsi
+++ b/arch/powerpc/boot/dts/fsl/e500mc_power_isa.dtsi
@@ -53,6 +53,7 @@
 		power-isa-mmc;		// Memory Coherence
 		power-isa-scpm;		// Store Conditional Page Mobility
 		power-isa-wt;		// Wait
+		fsl,eref-deo;		// Data Cache Extended Operations
 		mmu-type = "power-embedded";
 	};
 };
diff --git a/arch/powerpc/boot/dts/fsl/e5500_power_isa.dtsi b/arch/powerpc/boot/dts/fsl/e5500_power_isa.dtsi
index 3230212f7ad5..c254c981ae87 100644
--- a/arch/powerpc/boot/dts/fsl/e5500_power_isa.dtsi
+++ b/arch/powerpc/boot/dts/fsl/e5500_power_isa.dtsi
@@ -54,6 +54,7 @@
 		power-isa-scpm;		// Store Conditional Page Mobility
 		power-isa-wt;		// Wait
 		power-isa-64;		// 64-bit
+		fsl,eref-deo;		// Data Cache Extended Operations
 		mmu-type = "power-embedded";
 	};
 };
diff --git a/arch/powerpc/boot/dts/fsl/e6500_power_isa.dtsi b/arch/powerpc/boot/dts/fsl/e6500_power_isa.dtsi
new file mode 100644
index 000000000000..a912dbeff359
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/e6500_power_isa.dtsi
@@ -0,0 +1,65 @@
+/*
+ * e6500 Power ISA Device Tree Source (include)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/ {
+	cpus {
+		power-isa-version = "2.06";
+		power-isa-b;		// Base
+		power-isa-e;		// Embedded
+		power-isa-atb;		// Alternate Time Base
+		power-isa-cs;		// Cache Specification
+		power-isa-ds;		// Decorated Storage
+		power-isa-e.ed;		// Embedded.Enhanced Debug
+		power-isa-e.pd;		// Embedded.External PID
+		power-isa-e.hv;		// Embedded.Hypervisor
+		power-isa-e.le;		// Embedded.Little-Endian
+		power-isa-e.pm;		// Embedded.Performance Monitor
+		power-isa-e.pc;		// Embedded.Processor Control
+		power-isa-ecl;		// Embedded Cache Locking
+		power-isa-exp;		// External Proxy
+		power-isa-fp;		// Floating Point
+		power-isa-fp.r;		// Floating Point.Record
+		power-isa-mmc;		// Memory Coherence
+		power-isa-scpm;		// Store Conditional Page Mobility
+		power-isa-wt;		// Wait
+		power-isa-64;		// 64-bit
+		power-isa-e.pt;		// Embedded.Page Table
+		power-isa-e.hv.lrat;	// Embedded.Hypervisor.LRAT
+		power-isa-e.em;		// Embedded Multi-Threading
+		power-isa-v;		// Vector (AltiVec)
+		fsl,eref-er;		// Enhanced Reservations (Load and Reserve and Store Cond.)
+		fsl,eref-deo;		// Data Cache Extended Operations
+		mmu-type = "power-embedded";
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi
index 941fa159cefb..f1105bffa915 100644
--- a/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi
@@ -148,6 +148,7 @@
 
 	crypto: crypto@300000 {
 		compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
+		fsl,sec-era = <3>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0x30000 0x10000>;
diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
index 69ac1acd4349..dc6cc5afd189 100644
--- a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
@@ -155,7 +155,7 @@
 	compatible = "fsl,dcsr", "simple-bus";
 
 	dcsr-epu@0 {
-		compatible = "fsl,dcsr-epu";
+		compatible = "fsl,p2041-dcsr-epu", "fsl,dcsr-epu";
 		interrupts = <52 2 0 0
 			      84 2 0 0
 			      85 2 0 0>;
diff --git a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
index 9b5a81a4529c..3fa1e22d544a 100644
--- a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
@@ -182,7 +182,7 @@
 	compatible = "fsl,dcsr", "simple-bus";
 
 	dcsr-epu@0 {
-		compatible = "fsl,dcsr-epu";
+		compatible = "fsl,p3041-dcsr-epu", "fsl,dcsr-epu";
 		interrupts = <52 2 0 0
 			      84 2 0 0
 			      85 2 0 0>;
diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
index 19859ad851eb..34769a7eafea 100644
--- a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
@@ -156,7 +156,7 @@
 	compatible = "fsl,dcsr", "simple-bus";
 
 	dcsr-epu@0 {
-		compatible = "fsl,dcsr-epu";
+		compatible = "fsl,p4080-dcsr-epu", "fsl,dcsr-epu";
 		interrupts = <52 2 0 0
 			      84 2 0 0
 			      85 2 0 0>;
diff --git a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
index 9ea77c3513f6..bc3ae5a2252f 100644
--- a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
@@ -184,7 +184,7 @@
 	compatible = "fsl,dcsr", "simple-bus";
 
 	dcsr-epu@0 {
-		compatible = "fsl,dcsr-epu";
+		compatible = "fsl,p5020-dcsr-epu", "fsl,dcsr-epu";
 		interrupts = <52 2 0 0
 			      84 2 0 0
 			      85 2 0 0>;
diff --git a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
index 97f8c26f9709..a91897f6af09 100644
--- a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
@@ -129,7 +129,7 @@
 	compatible = "fsl,dcsr", "simple-bus";
 
 	dcsr-epu@0 {
-		compatible = "fsl,dcsr-epu";
+		compatible = "fsl,p5040-dcsr-epu", "fsl,dcsr-epu";
 		interrupts = <52 2 0 0
 			      84 2 0 0
 			      85 2 0 0>;
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi
index ffadcb563ada..bb3d8266b5ce 100644
--- a/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi
+++ b/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi
@@ -34,6 +34,7 @@
 
 crypto@30000 {
 	compatible = "fsl,sec-v4.4", "fsl,sec-v4.0";
+	fsl,sec-era = <3>;
 	#address-cells = <1>;
 	#size-cells = <1>;
 	ranges		 = <0x0 0x30000 0x10000>;
diff --git a/arch/powerpc/boot/dts/fsl/qonverge-usb2-dr-0.dtsi b/arch/powerpc/boot/dts/fsl/qonverge-usb2-dr-0.dtsi
new file mode 100644
index 000000000000..29dad723091e
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qonverge-usb2-dr-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ Qonverge USB Host device tree stub [ controller @ offset 0x210000 ]
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+usb@210000 {
+	compatible = "fsl-usb2-dr";
+	reg = <0x210000 0x1000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	interrupts = <44 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-gpio-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-gpio-1.dtsi
new file mode 100644
index 000000000000..c2f9cdadb604
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-gpio-1.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ GPIO device tree stub [ controller @ offset 0x131000 ]
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+gpio1: gpio@131000 {
+	compatible = "fsl,qoriq-gpio";
+	reg = <0x131000 0x1000>;
+	interrupts = <54 2 0 0>;
+	#gpio-cells = <2>;
+	gpio-controller;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-gpio-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-gpio-2.dtsi
new file mode 100644
index 000000000000..33f3ccbac83f
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-gpio-2.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ GPIO device tree stub [ controller @ offset 0x132000 ]
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+gpio2: gpio@132000 {
+	compatible = "fsl,qoriq-gpio";
+	reg = <0x132000 0x1000>;
+	interrupts = <86 2 0 0>;
+	#gpio-cells = <2>;
+	gpio-controller;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-gpio-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-gpio-3.dtsi
new file mode 100644
index 000000000000..86954e95ea02
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-gpio-3.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ GPIO device tree stub [ controller @ offset 0x133000 ]
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+gpio3: gpio@133000 {
+	compatible = "fsl,qoriq-gpio";
+	reg = <0x133000 0x1000>;
+	interrupts = <87 2 0 0>;
+	#gpio-cells = <2>;
+	gpio-controller;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec4.0-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec4.0-0.dtsi
index 0cbbac329539..02bee5fcbb9a 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-sec4.0-0.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-sec4.0-0.dtsi
@@ -34,6 +34,7 @@
 
 crypto: crypto@300000 {
 	compatible = "fsl,sec-v4.0";
+	fsl,sec-era = <1>;
 	#address-cells = <1>;
 	#size-cells = <1>;
 	reg = <0x300000 0x10000>;
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec4.2-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec4.2-0.dtsi
index 7990e0d3d6f2..7f7574e53323 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-sec4.2-0.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-sec4.2-0.dtsi
@@ -34,6 +34,7 @@
 
 crypto: crypto@300000 {
 	compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
+	fsl,sec-era = <3>;
 	#address-cells = <1>;
 	#size-cells = <1>;
 	reg		 = <0x300000 0x10000>;
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec4.1-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec5.0-0.dtsi
index 3308986bba0d..e298efbb0f3e 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-sec4.1-0.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-sec5.0-0.dtsi
@@ -1,7 +1,7 @@
 /*
- * QorIQ Sec/Crypto 4.1 device tree stub [ controller @ offset 0x300000 ]
+ * QorIQ Sec/Crypto 5.0 device tree stub [ controller @ offset 0x300000 ]
  *
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2012 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -33,7 +33,8 @@
  */
 
 crypto: crypto@300000 {
-	compatible = "fsl,sec-v4.1", "fsl,sec-v4.0";
+	compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
+	fsl,sec-era = <5>;
 	#address-cells = <1>;
 	#size-cells = <1>;
 	reg		 = <0x300000 0x10000>;
@@ -41,35 +42,35 @@ crypto: crypto@300000 {
 	interrupts	 = <92 2 0 0>;
 
 	sec_jr0: jr@1000 {
-		compatible = "fsl,sec-v4.1-job-ring",
+		compatible = "fsl,sec-v5.0-job-ring",
 			     "fsl,sec-v4.0-job-ring";
 		reg = <0x1000 0x1000>;
 		interrupts = <88 2 0 0>;
 	};
 
 	sec_jr1: jr@2000 {
-		compatible = "fsl,sec-v4.1-job-ring",
+		compatible = "fsl,sec-v5.0-job-ring",
 			     "fsl,sec-v4.0-job-ring";
 		reg = <0x2000 0x1000>;
 		interrupts = <89 2 0 0>;
 	};
 
 	sec_jr2: jr@3000 {
-		compatible = "fsl,sec-v4.1-job-ring",
+		compatible = "fsl,sec-v5.0-job-ring",
 			     "fsl,sec-v4.0-job-ring";
 		reg = <0x3000 0x1000>;
 		interrupts = <90 2 0 0>;
 	};
 
 	sec_jr3: jr@4000 {
-		compatible = "fsl,sec-v4.1-job-ring",
+		compatible = "fsl,sec-v5.0-job-ring",
 			     "fsl,sec-v4.0-job-ring";
 		reg = <0x4000 0x1000>;
 		interrupts = <91 2 0 0>;
 	};
 
 	rtic@6000 {
-		compatible = "fsl,sec-v4.1-rtic",
+		compatible = "fsl,sec-v5.0-rtic",
 			     "fsl,sec-v4.0-rtic";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -77,25 +78,25 @@ crypto: crypto@300000 {
 		ranges = <0x0 0x6100 0xe00>;
 
 		rtic_a: rtic-a@0 {
-			compatible = "fsl,sec-v4.1-rtic-memory",
+			compatible = "fsl,sec-v5.0-rtic-memory",
 				     "fsl,sec-v4.0-rtic-memory";
 			reg = <0x00 0x20 0x100 0x80>;
 		};
 
 		rtic_b: rtic-b@20 {
-			compatible = "fsl,sec-v4.1-rtic-memory",
+			compatible = "fsl,sec-v5.0-rtic-memory",
 				     "fsl,sec-v4.0-rtic-memory";
 			reg = <0x20 0x20 0x200 0x80>;
 		};
 
 		rtic_c: rtic-c@40 {
-			compatible = "fsl,sec-v4.1-rtic-memory",
+			compatible = "fsl,sec-v5.0-rtic-memory",
 				     "fsl,sec-v4.0-rtic-memory";
 			reg = <0x40 0x20 0x300 0x80>;
 		};
 
 		rtic_d: rtic-d@60 {
-			compatible = "fsl,sec-v4.1-rtic-memory",
+			compatible = "fsl,sec-v5.0-rtic-memory",
 				     "fsl,sec-v4.0-rtic-memory";
 			reg = <0x60 0x20 0x500 0x80>;
 		};
@@ -103,7 +104,7 @@ crypto: crypto@300000 {
 };
 
 sec_mon: sec_mon@314000 {
-	compatible = "fsl,sec-v4.1-mon", "fsl,sec-v4.0-mon";
+	compatible = "fsl,sec-v5.0-mon", "fsl,sec-v4.0-mon";
 	reg = <0x314000 0x1000>;
 	interrupts = <93 2 0 0>;
 };
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec5.2-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec5.2-0.dtsi
index 7b2ab8a8c1f4..33ff09d52e05 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-sec5.2-0.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-sec5.2-0.dtsi
@@ -34,6 +34,7 @@
 
 crypto: crypto@300000 {
 	compatible = "fsl,sec-v5.2", "fsl,sec-v5.0", "fsl,sec-v4.0";
+	fsl,sec-era = <5>;
 	#address-cells = <1>;
 	#size-cells = <1>;
 	reg		 = <0x300000 0x10000>;
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec5.3-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec5.3-0.dtsi
new file mode 100644
index 000000000000..08778221c194
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-sec5.3-0.dtsi
@@ -0,0 +1,119 @@
+/*
+ * QorIQ Sec/Crypto 5.3 device tree stub [ controller @ offset 0x300000 ]
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto: crypto@300000 {
+	compatible = "fsl,sec-v5.3", "fsl,sec-v5.0", "fsl,sec-v4.0";
+	fsl,sec-era = <4>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	reg		 = <0x300000 0x10000>;
+	ranges		 = <0 0x300000 0x10000>;
+	interrupts	 = <92 2 0 0>;
+
+	sec_jr0: jr@1000 {
+		compatible = "fsl,sec-v5.3-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x1000 0x1000>;
+		interrupts = <88 2 0 0>;
+	};
+
+	sec_jr1: jr@2000 {
+		compatible = "fsl,sec-v5.3-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x2000 0x1000>;
+		interrupts = <89 2 0 0>;
+	};
+
+	sec_jr2: jr@3000 {
+		compatible = "fsl,sec-v5.3-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x3000 0x1000>;
+		interrupts = <90 2 0 0>;
+	};
+
+	sec_jr3: jr@4000 {
+		compatible = "fsl,sec-v5.3-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x4000 0x1000>;
+		interrupts = <91 2 0 0>;
+	};
+
+	rtic@6000 {
+		compatible = "fsl,sec-v5.3-rtic",
+			     "fsl,sec-v5.0-rtic",
+			     "fsl,sec-v4.0-rtic";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x6000 0x100>;
+		ranges = <0x0 0x6100 0xe00>;
+
+		rtic_a: rtic-a@0 {
+			compatible = "fsl,sec-v5.3-rtic-memory",
+				     "fsl,sec-v5.0-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x00 0x20 0x100 0x80>;
+		};
+
+		rtic_b: rtic-b@20 {
+			compatible = "fsl,sec-v5.3-rtic-memory",
+				     "fsl,sec-v5.0-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x20 0x20 0x200 0x80>;
+		};
+
+		rtic_c: rtic-c@40 {
+			compatible = "fsl,sec-v5.3-rtic-memory",
+				     "fsl,sec-v5.0-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x40 0x20 0x300 0x80>;
+		};
+
+		rtic_d: rtic-d@60 {
+			compatible = "fsl,sec-v5.3-rtic-memory",
+				     "fsl,sec-v5.0-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x60 0x20 0x500 0x80>;
+		};
+	};
+};
+
+sec_mon: sec_mon@314000 {
+	compatible = "fsl,sec-v5.3-mon", "fsl,sec-v5.0-mon", "fsl,sec-v4.0-mon";
+	reg = <0x314000 0x1000>;
+	interrupts = <93 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
new file mode 100644
index 000000000000..bd611a9cad32
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
@@ -0,0 +1,442 @@
+/*
+ * T4240 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,ifc", "simple-bus";
+	interrupts = <25 2 0 0>;
+};
+
+/* controller at 0x240000 */
+&pci0 {
+	compatible = "fsl,t4240-pcie", "fsl,qoriq-pcie-v3.0";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	interrupts = <20 2 0 0>;
+	pcie@0 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		reg = <0 0 0 0 0>;
+		interrupts = <20 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 40 1 0 0
+			0000 0 0 2 &mpic 1 1 0 0
+			0000 0 0 3 &mpic 2 1 0 0
+			0000 0 0 4 &mpic 3 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x250000 */
+&pci1 {
+	compatible = "fsl,t4240-pcie", "fsl,qoriq-pcie-v3.0";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 0xff>;
+	interrupts = <21 2 0 0>;
+	pcie@0 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		reg = <0 0 0 0 0>;
+		interrupts = <21 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 41 1 0 0
+			0000 0 0 2 &mpic 5 1 0 0
+			0000 0 0 3 &mpic 6 1 0 0
+			0000 0 0 4 &mpic 7 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x260000 */
+&pci2 {
+	compatible = "fsl,t4240-pcie", "fsl,qoriq-pcie-v3.0";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	interrupts = <22 2 0 0>;
+	pcie@0 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		reg = <0 0 0 0 0>;
+		interrupts = <22 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 42 1 0 0
+			0000 0 0 2 &mpic 9 1 0 0
+			0000 0 0 3 &mpic 10 1 0 0
+			0000 0 0 4 &mpic 11 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x270000 */
+&pci3 {
+	compatible = "fsl,t4240-pcie", "fsl,qoriq-pcie-v3.0";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	interrupts = <23 2 0 0>;
+	pcie@0 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		reg = <0 0 0 0 0>;
+		interrupts = <23 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 43 1 0 0
+			0000 0 0 2 &mpic 0 1 0 0
+			0000 0 0 3 &mpic 4 1 0 0
+			0000 0 0 4 &mpic 8 1 0 0
+			>;
+	};
+};
+
+&rio {
+	compatible = "fsl,srio";
+	interrupts = <16 2 1 11>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+	ranges;
+
+	port1 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <1>;
+	};
+
+	port2 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <2>;
+	};
+};
+
+&dcsr {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,dcsr", "simple-bus";
+
+	dcsr-epu@0 {
+		compatible = "fsl,t4240-dcsr-epu", "fsl,dcsr-epu";
+		interrupts = <52 2 0 0
+			      84 2 0 0
+			      85 2 0 0
+			      94 2 0 0
+			      95 2 0 0>;
+		reg = <0x0 0x1000>;
+	};
+	dcsr-npc {
+		compatible = "fsl,t4240-dcsr-cnpc", "fsl,dcsr-cnpc";
+		reg = <0x1000 0x1000 0x1002000 0x10000>;
+	};
+	dcsr-nxc@2000 {
+		compatible = "fsl,dcsr-nxc";
+		reg = <0x2000 0x1000>;
+	};
+	dcsr-corenet {
+		compatible = "fsl,dcsr-corenet";
+		reg = <0x8000 0x1000 0x1A000 0x1000>;
+	};
+	dcsr-dpaa@9000 {
+		compatible = "fsl,t4240-dcsr-dpaa", "fsl,dcsr-dpaa";
+		reg = <0x9000 0x1000>;
+	};
+	dcsr-ocn@11000 {
+		compatible = "fsl,t4240-dcsr-ocn", "fsl,dcsr-ocn";
+		reg = <0x11000 0x1000>;
+	};
+	dcsr-ddr@12000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr1>;
+		reg = <0x12000 0x1000>;
+	};
+	dcsr-ddr@13000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr2>;
+		reg = <0x13000 0x1000>;
+	};
+	dcsr-ddr@14000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr3>;
+		reg = <0x14000 0x1000>;
+	};
+	dcsr-nal@18000 {
+		compatible = "fsl,t4240-dcsr-nal", "fsl,dcsr-nal";
+		reg = <0x18000 0x1000>;
+	};
+	dcsr-rcpm@22000 {
+		compatible = "fsl,t4240-dcsr-rcpm", "fsl,dcsr-rcpm";
+		reg = <0x22000 0x1000>;
+	};
+	dcsr-snpc@30000 {
+		compatible = "fsl,t4240-dcsr-snpc", "fsl,dcsr-snpc";
+		reg = <0x30000 0x1000 0x1022000 0x10000>;
+	};
+	dcsr-snpc@31000 {
+		compatible = "fsl,t4240-dcsr-snpc", "fsl,dcsr-snpc";
+		reg = <0x31000 0x1000 0x1042000 0x10000>;
+	};
+	dcsr-snpc@32000 {
+		compatible = "fsl,t4240-dcsr-snpc", "fsl,dcsr-snpc";
+		reg = <0x32000 0x1000 0x1062000 0x10000>;
+	};
+	dcsr-cpu-sb-proxy@100000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu0>;
+		reg = <0x100000 0x1000 0x101000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@108000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu1>;
+		reg = <0x108000 0x1000 0x109000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@110000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu2>;
+		reg = <0x110000 0x1000 0x111000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@118000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu3>;
+		reg = <0x118000 0x1000 0x119000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@120000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu4>;
+		reg = <0x120000 0x1000 0x121000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@128000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu5>;
+		reg = <0x128000 0x1000 0x129000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@130000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu6>;
+		reg = <0x130000 0x1000 0x131000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@138000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu7>;
+		reg = <0x138000 0x1000 0x139000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@140000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu8>;
+		reg = <0x140000 0x1000 0x141000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@148000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu9>;
+		reg = <0x148000 0x1000 0x149000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@150000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu10>;
+		reg = <0x150000 0x1000 0x151000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@158000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu11>;
+		reg = <0x158000 0x1000 0x159000 0x1000>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+
+	soc-sram-error {
+		compatible = "fsl,soc-sram-error";
+		interrupts = <16 2 1 29>;
+	};
+
+	corenet-law@0 {
+		compatible = "fsl,corenet-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <32>;
+	};
+
+	ddr1: memory-controller@8000 {
+		compatible = "fsl,qoriq-memory-controller-v4.7",
+				"fsl,qoriq-memory-controller";
+		reg = <0x8000 0x1000>;
+		interrupts = <16 2 1 23>;
+	};
+
+	ddr2: memory-controller@9000 {
+		compatible = "fsl,qoriq-memory-controller-v4.7",
+				"fsl,qoriq-memory-controller";
+		reg = <0x9000 0x1000>;
+		interrupts = <16 2 1 22>;
+	};
+
+	ddr3: memory-controller@a000 {
+		compatible = "fsl,qoriq-memory-controller-v4.7",
+				"fsl,qoriq-memory-controller";
+		reg = <0xa000 0x1000>;
+		interrupts = <16 2 1 21>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,t4240-l3-cache-controller", "cache";
+		reg = <0x10000 0x1000
+		       0x11000 0x1000
+		       0x12000 0x1000>;
+		interrupts = <16 2 1 27
+			      16 2 1 26
+			      16 2 1 25>;
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,corenet-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 31>;
+		fsl,ccf-num-csdids = <32>;
+		fsl,ccf-num-snoopids = <32>;
+	};
+
+	iommu@20000 {
+		compatible = "fsl,pamu-v1.0", "fsl,pamu";
+		reg = <0x20000 0x6000>;
+		interrupts = <
+			24 2 0 0
+			16 2 1 30>;
+	};
+
+/include/ "qoriq-mpic.dtsi"
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,t4240-device-config", "fsl,qoriq-device-config-2.0";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		fsl,liodn-bits = <12>;
+	};
+
+	clockgen: global-utilities@e1000 {
+		compatible = "fsl,t4240-clockgen", "fsl,qoriq-clockgen-2.0";
+		reg = <0xe1000 0x1000>;
+	};
+
+	rcpm: global-utilities@e2000 {
+		compatible = "fsl,t4240-rcpm", "fsl,qoriq-rcpm-2.0";
+		reg = <0xe2000 0x1000>;
+	};
+
+	sfp: sfp@e8000 {
+		compatible = "fsl,t4240-sfp";
+		reg	   = <0xe8000 0x1000>;
+	};
+
+	serdes: serdes@ea000 {
+		compatible = "fsl,t4240-serdes";
+		reg	   = <0xea000 0x4000>;
+	};
+
+/include/ "qoriq-dma-0.dtsi"
+/include/ "qoriq-dma-1.dtsi"
+
+/include/ "qoriq-espi-0.dtsi"
+	spi@110000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "qoriq-esdhc-0.dtsi"
+	sdhc@114000 {
+		compatible = "fsl,t4240-esdhc", "fsl,esdhc";
+		sdhci,auto-cmd12;
+	};
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-gpio-1.dtsi"
+/include/ "qoriq-gpio-2.dtsi"
+/include/ "qoriq-gpio-3.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+		usb0: usb@210000 {
+			compatible = "fsl-usb2-mph-v2.4", "fsl-usb2-mph";
+			phy_type = "utmi";
+			port0;
+		};
+/include/ "qoriq-usb2-dr-0.dtsi"
+		usb1: usb@211000 {
+			compatible = "fsl-usb2-dr-v2.4", "fsl-usb2-dr";
+			dr_mode = "host";
+			phy_type = "utmi";
+		};
+/include/ "qoriq-sata2-0.dtsi"
+/include/ "qoriq-sata2-1.dtsi"
+/include/ "qoriq-sec5.0-0.dtsi"
+
+	L2_1: l2-cache-controller@c20000 {
+		compatible = "fsl,t4240-l2-cache-controller";
+		reg = <0xc20000 0x40000>;
+		next-level-cache = <&cpc>;
+	};
+	L2_2: l2-cache-controller@c60000 {
+		compatible = "fsl,t4240-l2-cache-controller";
+		reg = <0xc60000 0x40000>;
+		next-level-cache = <&cpc>;
+	};
+	L2_3: l2-cache-controller@ca0000 {
+		compatible = "fsl,t4240-l2-cache-controller";
+		reg = <0xca0000 0x40000>;
+		next-level-cache = <&cpc>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi
new file mode 100644
index 000000000000..a93c55a88560
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi
@@ -0,0 +1,128 @@
+/*
+ * T4240 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e6500_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,T4240";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+		dcsr = &dcsr;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		crypto = &crypto;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		pci3 = &pci3;
+		dma0 = &dma0;
+		dma1 = &dma1;
+		sdhc = &sdhc;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e6500@0 {
+			device_type = "cpu";
+			reg = <0 1>;
+			next-level-cache = <&L2_1>;
+		};
+		cpu1: PowerPC,e6500@2 {
+			device_type = "cpu";
+			reg = <2 3>;
+			next-level-cache = <&L2_1>;
+		};
+		cpu2: PowerPC,e6500@4 {
+			device_type = "cpu";
+			reg = <4 5>;
+			next-level-cache = <&L2_1>;
+		};
+		cpu3: PowerPC,e6500@6 {
+			device_type = "cpu";
+			reg = <6 7>;
+			next-level-cache = <&L2_1>;
+		};
+		cpu4: PowerPC,e6500@8 {
+			device_type = "cpu";
+			reg = <8 9>;
+			next-level-cache = <&L2_2>;
+		};
+		cpu5: PowerPC,e6500@10 {
+			device_type = "cpu";
+			reg = <10 11>;
+			next-level-cache = <&L2_2>;
+		};
+		cpu6: PowerPC,e6500@12 {
+			device_type = "cpu";
+			reg = <12 13>;
+			next-level-cache = <&L2_2>;
+		};
+		cpu7: PowerPC,e6500@14 {
+			device_type = "cpu";
+			reg = <14 15>;
+			next-level-cache = <&L2_2>;
+		};
+		cpu8: PowerPC,e6500@16 {
+			device_type = "cpu";
+			reg = <16 17>;
+			next-level-cache = <&L2_3>;
+		};
+		cpu9: PowerPC,e6500@18 {
+			device_type = "cpu";
+			reg = <18 19>;
+			next-level-cache = <&L2_3>;
+		};
+		cpu10: PowerPC,e6500@20 {
+			device_type = "cpu";
+			reg = <20 21>;
+			next-level-cache = <&L2_3>;
+		};
+		cpu11: PowerPC,e6500@22 {
+			device_type = "cpu";
+			reg = <22 23>;
+			next-level-cache = <&L2_3>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8536ds_36b.dts b/arch/powerpc/boot/dts/mpc8536ds_36b.dts
index f8a3b3413176..6c723ee108cd 100644
--- a/arch/powerpc/boot/dts/mpc8536ds_36b.dts
+++ b/arch/powerpc/boot/dts/mpc8536ds_36b.dts
@@ -32,7 +32,7 @@
 		reg = <0 0 0 0>;	// Filled by U-Boot
 	};
 
-	lbc: localbus@ffe05000 {
+	lbc: localbus@fffe05000 {
 		reg = <0xf 0xffe05000 0 0x1000>;
 
 		ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
@@ -44,7 +44,7 @@
 		ranges = <0x0 0xf 0xffe00000 0x100000>;
 	};
 
-	pci0: pci@ffe08000 {
+	pci0: pci@fffe08000 {
 		reg = <0xf 0xffe08000 0 0x1000>;
 		ranges = <0x02000000 0 0xf0000000 0xc 0x00000000 0 0x10000000
 			  0x01000000 0 0x00000000 0xf 0xffc00000 0 0x00010000>;
@@ -59,7 +59,7 @@
 			0x8800 0 0 4 &mpic 4 1 0 0>;
 	};
 
-	pci1: pcie@ffe09000 {
+	pci1: pcie@fffe09000 {
 		reg = <0xf 0xffe09000 0 0x1000>;
 		ranges = <0x02000000 0 0xf8000000 0xc 0x18000000 0 0x08000000
 			  0x01000000 0 0x00000000 0xf 0xffc20000 0 0x00010000>;
diff --git a/arch/powerpc/boot/dts/p1021rdb-pc.dtsi b/arch/powerpc/boot/dts/p1021rdb-pc.dtsi
index c13abfbbe2e2..d6274c58f496 100644
--- a/arch/powerpc/boot/dts/p1021rdb-pc.dtsi
+++ b/arch/powerpc/boot/dts/p1021rdb-pc.dtsi
@@ -62,11 +62,19 @@
 		};
 
 		partition@400000 {
-			/* 11MB for JFFS2 based Root file System */
-			reg = <0x00400000 0x00b00000>;
+			/* 10.75MB for JFFS2 based Root file System */
+			reg = <0x00400000 0x00ac0000>;
 			label = "NOR JFFS2 Root File System";
 		};
 
+		partition@ec0000 {
+			/* This location must not be altered  */
+			/* 256KB for QE ucode firmware*/
+			reg = <0x00ec0000 0x00040000>;
+			label = "NOR QE microcode firmware";
+			read-only;
+		};
+
 		partition@f00000 {
 			/* This location must not be altered  */
 			/* 512KB for u-boot Bootloader Image */
diff --git a/arch/powerpc/boot/dts/p1025rdb_36b.dts b/arch/powerpc/boot/dts/p1025rdb_36b.dts
index 4ce4bfa0eda4..06deb6f341ba 100644
--- a/arch/powerpc/boot/dts/p1025rdb_36b.dts
+++ b/arch/powerpc/boot/dts/p1025rdb_36b.dts
@@ -82,6 +82,11 @@
 				  0x0 0x100000>;
 		};
 	};
+
+	qe: qe@fffe80000 {
+		status = "disabled"; /* no firmware loaded */
+	};
+
 };
 
 /include/ "p1025rdb.dtsi"
diff --git a/arch/powerpc/boot/dts/t4240qds.dts b/arch/powerpc/boot/dts/t4240qds.dts
new file mode 100644
index 000000000000..0555976dd0f3
--- /dev/null
+++ b/arch/powerpc/boot/dts/t4240qds.dts
@@ -0,0 +1,224 @@
+/*
+ * T4240QDS Device Tree Source
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/t4240si-pre.dtsi"
+
+/ {
+	model = "fsl,T4240QDS";
+	compatible = "fsl,T4240QDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	ifc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x2000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xff800000 0x00010000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x2 0x0 0x10000>;
+
+			partition@0 {
+				/* This location must not be altered  */
+				/* 1MB for u-boot Bootloader Image */
+				reg = <0x0 0x00100000>;
+				label = "NAND U-Boot Image";
+				read-only;
+			};
+
+			partition@100000 {
+				/* 1MB for DTB Image */
+				reg = <0x00100000 0x00100000>;
+				label = "NAND DTB Image";
+			};
+
+			partition@200000 {
+				/* 10MB for Linux Kernel Image */
+				reg = <0x00200000 0x00A00000>;
+				label = "NAND Linux Kernel Image";
+			};
+
+			partition@C00000 {
+				/* 500MB for Root file System Image */
+				reg = <0x00c00000 0x1F400000>;
+				label = "NAND RFS Image";
+			};
+		};
+
+		board-control@3,0 {
+			compatible = "fsl,t4240qds-fpga", "fsl,fpga-qixis";
+			reg = <3 0 0x300>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "sst,sst25wf040";
+				reg = <0>;
+				spi-max-frequency = <40000000>; /* input clock */
+			};
+		};
+
+		i2c@118000 {
+			eeprom@51 {
+				compatible = "at24,24c256";
+				reg = <0x51>;
+			};
+			eeprom@52 {
+				compatible = "at24,24c256";
+				reg = <0x52>;
+			};
+			eeprom@53 {
+				compatible = "at24,24c256";
+				reg = <0x53>;
+			};
+			eeprom@54 {
+				compatible = "at24,24c256";
+				reg = <0x54>;
+			};
+			eeprom@55 {
+				compatible = "at24,24c256";
+				reg = <0x55>;
+			};
+			eeprom@56 {
+				compatible = "at24,24c256";
+				reg = <0x56>;
+			};
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+				interrupts = <0x1 0x1 0 0>;
+			};
+		};
+	};
+
+	pci0: pcie@ffe240000 {
+		reg = <0xf 0xfe240000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe250000 {
+		reg = <0xf 0xfe250000 0 0x10000>;
+		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe260000 {
+		reg = <0xf 0xfe260000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci3: pcie@ffe270000 {
+		reg = <0xf 0xfe270000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+	rio: rapidio@ffe0c0000 {
+		reg = <0xf 0xfe0c0000 0 0x11000>;
+
+		port1 {
+			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+		};
+		port2 {
+			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+		};
+	};
+};
+
+/include/ "fsl/t4240si-post.dtsi"
diff --git a/arch/powerpc/configs/corenet64_smp_defconfig b/arch/powerpc/configs/corenet64_smp_defconfig
index 3d139fa04050..6c8b020806ff 100644
--- a/arch/powerpc/configs/corenet64_smp_defconfig
+++ b/arch/powerpc/configs/corenet64_smp_defconfig
@@ -1,14 +1,13 @@
 CONFIG_PPC64=y
 CONFIG_PPC_BOOK3E_64=y
-# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
+CONFIG_ALTIVEC=y
 CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_EXPERIMENTAL=y
+CONFIG_NR_CPUS=24
 CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -22,10 +21,13 @@ CONFIG_MODVERSIONS=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_MAC_PARTITION=y
+CONFIG_B4_QDS=y
 CONFIG_P5020_DS=y
 CONFIG_P5040_DS=y
+CONFIG_T4240_QDS=y
 # CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
 CONFIG_BINFMT_MISC=m
+CONFIG_FSL_IFC=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCI_MSI=y
 CONFIG_RAPIDIO=y
@@ -58,16 +60,33 @@ CONFIG_IP_SCTP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
 CONFIG_MTD=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_OF_PARTS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
+CONFIG_FTL=y
 CONFIG_MTD_CFI=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_MTD_M25P80=y
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_NAND_ECC=y
 CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_FSL_ELBC=y
 CONFIG_MTD_NAND_FSL_IFC=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
@@ -78,6 +97,7 @@ CONFIG_SATA_FSL=y
 CONFIG_SATA_SIL24=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
+CONFIG_E1000E=y
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_KEYBOARD is not set
@@ -121,7 +141,16 @@ CONFIG_NTFS_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_HUGETLBFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=1
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
@@ -129,6 +158,12 @@ CONFIG_NFSD=m
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=m
 CONFIG_CRC_T10DIF=y
+CONFIG_CRC16=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
@@ -140,6 +175,5 @@ CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_MD4=y
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_AES=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_DEV_FSL_CAAM=y
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index cf815e847cdc..5a58882e351e 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -1,13 +1,12 @@
 CONFIG_PPC_85xx=y
 CONFIG_PHYS_64BIT=y
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_AUDIT=y
 CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -48,6 +47,7 @@ CONFIG_HIGHMEM=y
 CONFIG_BINFMT_MISC=m
 CONFIG_MATH_EMULATION=y
 CONFIG_FORCE_MAX_ZONEORDER=12
+CONFIG_FSL_IFC=y
 CONFIG_PCI=y
 CONFIG_PCI_MSI=y
 CONFIG_RAPIDIO=y
@@ -79,18 +79,33 @@ CONFIG_IP_SCTP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
 CONFIG_MTD=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_OF_PARTS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_FTL=y
 CONFIG_MTD_CFI=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_MTD_M25P80=y
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_NAND_ECC=y
 CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_FSL_ELBC=y
 CONFIG_MTD_NAND_FSL_IFC=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=y
@@ -106,6 +121,7 @@ CONFIG_SCSI_LOGGING=y
 CONFIG_ATA=y
 CONFIG_SATA_AHCI=y
 CONFIG_SATA_FSL=y
+CONFIG_SATA_SIL24=y
 CONFIG_PATA_ALI=y
 CONFIG_PATA_VIA=y
 CONFIG_NETDEVICES=y
@@ -113,6 +129,9 @@ CONFIG_DUMMY=y
 CONFIG_FS_ENET=y
 CONFIG_UCC_GETH=y
 CONFIG_GIANFAR=y
+CONFIG_E1000=y
+CONFIG_E1000E=y
+CONFIG_IGB=y
 CONFIG_MARVELL_PHY=y
 CONFIG_DAVICOM_PHY=y
 CONFIG_CICADA_PHY=y
@@ -132,7 +151,6 @@ CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
 CONFIG_SERIAL_QE=m
 CONFIG_NVRAM=y
-CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_CPM=m
 CONFIG_I2C_MPC=y
@@ -206,6 +224,15 @@ CONFIG_NTFS_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_HUGETLBFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=1
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
 CONFIG_ADFS_FS=m
 CONFIG_AFFS_FS=m
 CONFIG_HFS_FS=m
@@ -224,13 +251,18 @@ CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_CRC_T10DIF=y
+CONFIG_CRC16=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
 CONFIG_DEBUG_FS=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_INFO=y
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_AES=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_DEV_FSL_CAAM=y
 CONFIG_CRYPTO_DEV_TALITOS=y
diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig
index 8d00ea5b8a9f..165e6b32baef 100644
--- a/arch/powerpc/configs/mpc85xx_smp_defconfig
+++ b/arch/powerpc/configs/mpc85xx_smp_defconfig
@@ -50,6 +50,7 @@ CONFIG_HIGHMEM=y
 CONFIG_BINFMT_MISC=m
 CONFIG_MATH_EMULATION=y
 CONFIG_FORCE_MAX_ZONEORDER=12
+CONFIG_FSL_IFC=y
 CONFIG_PCI=y
 CONFIG_PCI_MSI=y
 CONFIG_RAPIDIO=y
@@ -81,18 +82,33 @@ CONFIG_IP_SCTP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
 CONFIG_MTD=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_OF_PARTS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_FTL=y
 CONFIG_MTD_CFI=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_MTD_M25P80=y
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_NAND_ECC=y
 CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_FSL_ELBC=y
 CONFIG_MTD_NAND_FSL_IFC=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=y
@@ -108,6 +124,7 @@ CONFIG_SCSI_LOGGING=y
 CONFIG_ATA=y
 CONFIG_SATA_AHCI=y
 CONFIG_SATA_FSL=y
+CONFIG_SATA_SIL24=y
 CONFIG_PATA_ALI=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
@@ -207,6 +224,15 @@ CONFIG_NTFS_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_HUGETLBFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=1
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
 CONFIG_ADFS_FS=m
 CONFIG_AFFS_FS=m
 CONFIG_HFS_FS=m
@@ -225,6 +251,12 @@ CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_CRC_T10DIF=y
+CONFIG_CRC16=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
 CONFIG_DEBUG_FS=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_INFO=y
diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index ccadad6db4e4..284e50bc7b68 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -375,7 +375,7 @@ extern const char *powerpc_base_platform;
 #define CPU_FTRS_E6500	(CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | \
 	    CPU_FTR_L2CSR | CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE | \
 	    CPU_FTR_DBELL | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \
-	    CPU_FTR_DEBUG_LVL_EXC | CPU_FTR_EMB_HV)
+	    CPU_FTR_DEBUG_LVL_EXC | CPU_FTR_EMB_HV | CPU_FTR_ALTIVEC_COMP)
 #define CPU_FTRS_GENERIC_32	(CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN)
 
 /* 64-bit CPUs */
diff --git a/arch/powerpc/include/asm/kvm_asm.h b/arch/powerpc/include/asm/kvm_asm.h
index aabcdba8f6b0..b9dd382cb349 100644
--- a/arch/powerpc/include/asm/kvm_asm.h
+++ b/arch/powerpc/include/asm/kvm_asm.h
@@ -67,6 +67,10 @@
 #define BOOKE_INTERRUPT_HV_SYSCALL 40
 #define BOOKE_INTERRUPT_HV_PRIV 41
 
+/* altivec */
+#define BOOKE_INTERRUPT_ALTIVEC_UNAVAIL 42
+#define BOOKE_INTERRUPT_ALTIVEC_ASSIST 43
+
 /* book3s */
 
 #define BOOK3S_INTERRUPT_SYSTEM_RESET	0x100
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 025a130729bc..ffbc5fd549ac 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -70,6 +70,8 @@ struct pci_controller {
 	 *  BIG_ENDIAN - cfg_addr is a big endian register
 	 *  BROKEN_MRM - the 440EPx/GRx chips have an errata that causes hangs on
 	 *   the PLB4.  Effectively disable MRM commands by setting this.
+	 *  FSL_CFG_REG_LINK - Freescale controller version in which the PCIe
+	 *   link status is in a RC PCIe cfg register (vs being a SoC register)
 	 */
 #define PPC_INDIRECT_TYPE_SET_CFG_TYPE		0x00000001
 #define PPC_INDIRECT_TYPE_EXT_REG		0x00000002
@@ -77,6 +79,7 @@ struct pci_controller {
 #define PPC_INDIRECT_TYPE_NO_PCIE_LINK		0x00000008
 #define PPC_INDIRECT_TYPE_BIG_ENDIAN		0x00000010
 #define PPC_INDIRECT_TYPE_BROKEN_MRM		0x00000020
+#define PPC_INDIRECT_TYPE_FSL_CFG_REG_LINK	0x00000040
 	u32 indirect_type;
 	/* Currently, we limit ourselves to 1 IO range and 3 mem
 	 * ranges since the common pci_bus structure can't handle more
@@ -90,9 +93,9 @@ struct pci_controller {
 
 #ifdef CONFIG_PPC64
 	unsigned long buid;
+#endif	/* CONFIG_PPC64 */
 
 	void *private_data;
-#endif	/* CONFIG_PPC64 */
 };
 
 /* These are used for config access before all the PCI probing
@@ -117,6 +120,12 @@ extern void setup_indirect_pci(struct pci_controller* hose,
 			       resource_size_t cfg_addr,
 			       resource_size_t cfg_data, u32 flags);
 
+extern int indirect_read_config(struct pci_bus *bus, unsigned int devfn,
+				int offset, int len, u32 *val);
+
+extern int indirect_write_config(struct pci_bus *bus, unsigned int devfn,
+				 int offset, int len, u32 val);
+
 static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
 {
 	return bus->sysdata;
diff --git a/arch/powerpc/kernel/cpu_setup_fsl_booke.S b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
index dcd881937f7a..0b9af015bedc 100644
--- a/arch/powerpc/kernel/cpu_setup_fsl_booke.S
+++ b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
@@ -53,6 +53,15 @@ _GLOBAL(__e500_dcache_setup)
 	isync
 	blr
 
+_GLOBAL(__setup_cpu_e6500)
+	mflr	r6
+#ifdef CONFIG_PPC64
+	bl	.setup_altivec_ivors
+#endif
+	bl	__setup_cpu_e5500
+	mtlr	r6
+	blr
+
 #ifdef CONFIG_PPC32
 _GLOBAL(__setup_cpu_e200)
 	/* enable dedicated debug exception handling resources (Debug APU) */
@@ -107,6 +116,13 @@ _GLOBAL(__setup_cpu_e5500)
 #endif
 
 #ifdef CONFIG_PPC_BOOK3E_64
+_GLOBAL(__restore_cpu_e6500)
+	mflr	r5
+	bl	.setup_altivec_ivors
+	bl	__restore_cpu_e5500
+	mtlr	r5
+	blr
+
 _GLOBAL(__restore_cpu_e5500)
 	mflr	r4
 	bl	__e500_icache_setup
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 19599ef352bc..ae9f433daabf 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -74,7 +74,9 @@ extern void __restore_cpu_a2(void);
 #endif /* CONFIG_PPC64 */
 #if defined(CONFIG_E500)
 extern void __setup_cpu_e5500(unsigned long offset, struct cpu_spec* spec);
+extern void __setup_cpu_e6500(unsigned long offset, struct cpu_spec* spec);
 extern void __restore_cpu_e5500(void);
+extern void __restore_cpu_e6500(void);
 #endif /* CONFIG_E500 */
 
 /* This table only contains "desktop" CPUs, it need to be filled with embedded
@@ -2065,7 +2067,8 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.pvr_value		= 0x80400000,
 		.cpu_name		= "e6500",
 		.cpu_features		= CPU_FTRS_E6500,
-		.cpu_user_features	= COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
+		.cpu_user_features	= COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU |
+			PPC_FEATURE_HAS_ALTIVEC_COMP,
 		.mmu_features		= MMU_FTR_TYPE_FSL_E | MMU_FTR_BIG_PHYS |
 			MMU_FTR_USE_TLBILX,
 		.icache_bsize		= 64,
@@ -2073,9 +2076,9 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.num_pmcs		= 4,
 		.oprofile_cpu_type	= "ppc/e6500",
 		.oprofile_type		= PPC_OPROFILE_FSL_EMB,
-		.cpu_setup		= __setup_cpu_e5500,
+		.cpu_setup		= __setup_cpu_e6500,
 #ifndef CONFIG_PPC32
-		.cpu_restore		= __restore_cpu_e5500,
+		.cpu_restore		= __restore_cpu_e6500,
 #endif
 		.machine_check		= machine_check_e500mc,
 		.platform		= "ppce6500",
diff --git a/arch/powerpc/kernel/epapr_hcalls.S b/arch/powerpc/kernel/epapr_hcalls.S
index 62c0dc237826..9f1ebf7338f1 100644
--- a/arch/powerpc/kernel/epapr_hcalls.S
+++ b/arch/powerpc/kernel/epapr_hcalls.S
@@ -17,6 +17,7 @@
 #include <asm/asm-compat.h>
 #include <asm/asm-offsets.h>
 
+#ifndef CONFIG_PPC64
 /* epapr_ev_idle() was derived from e500_idle() */
 _GLOBAL(epapr_ev_idle)
 	CURRENT_THREAD_INFO(r3, r1)
@@ -42,6 +43,7 @@ epapr_ev_idle_start:
 	 * _TLF_NAPPING.
 	 */
 	b	idle_loop
+#endif
 
 /* Hypercall entry point. Will be patched with device tree instructions. */
 .global epapr_hypercall_start
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index ae54553eacd9..42a756eec9ff 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -299,6 +299,8 @@ interrupt_base_book3e:					/* fake trap */
 	EXCEPTION_STUB(0x1a0, watchdog)			/* 0x09f0 */
 	EXCEPTION_STUB(0x1c0, data_tlb_miss)
 	EXCEPTION_STUB(0x1e0, instruction_tlb_miss)
+	EXCEPTION_STUB(0x200, altivec_unavailable)	/* 0x0f20 */
+	EXCEPTION_STUB(0x220, altivec_assist)		/* 0x1700 */
 	EXCEPTION_STUB(0x260, perfmon)
 	EXCEPTION_STUB(0x280, doorbell)
 	EXCEPTION_STUB(0x2a0, doorbell_crit)
@@ -395,6 +397,45 @@ interrupt_end_book3e:
 	bl	.kernel_fp_unavailable_exception
 	b	.ret_from_except
 
+/* Altivec Unavailable Interrupt */
+	START_EXCEPTION(altivec_unavailable);
+	NORMAL_EXCEPTION_PROLOG(0x200, BOOKE_INTERRUPT_ALTIVEC_UNAVAIL,
+				PROLOG_ADDITION_NONE)
+	/* we can probably do a shorter exception entry for that one... */
+	EXCEPTION_COMMON(0x200, PACA_EXGEN, INTS_KEEP)
+#ifdef CONFIG_ALTIVEC
+BEGIN_FTR_SECTION
+	ld	r12,_MSR(r1)
+	andi.	r0,r12,MSR_PR;
+	beq-	1f
+	bl	.load_up_altivec
+	b	fast_exception_return
+1:
+END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+#endif
+	INTS_DISABLE
+	bl	.save_nvgprs
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	.altivec_unavailable_exception
+	b	.ret_from_except
+
+/* AltiVec Assist */
+	START_EXCEPTION(altivec_assist);
+	NORMAL_EXCEPTION_PROLOG(0x220, BOOKE_INTERRUPT_ALTIVEC_ASSIST,
+				PROLOG_ADDITION_NONE)
+	EXCEPTION_COMMON(0x220, PACA_EXGEN, INTS_DISABLE)
+	bl	.save_nvgprs
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+#ifdef CONFIG_ALTIVEC
+BEGIN_FTR_SECTION
+	bl	.altivec_assist_exception
+END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+#else
+	bl	.unknown_exception
+#endif
+	b	.ret_from_except
+
+
 /* Decrementer Interrupt */
 	MASKABLE_EXCEPTION(0x900, BOOKE_INTERRUPT_DECREMENTER,
 			   decrementer, .timer_interrupt, ACK_DEC)
@@ -807,6 +848,7 @@ fast_exception_return:
 BAD_STACK_TRAMPOLINE(0x000)
 BAD_STACK_TRAMPOLINE(0x100)
 BAD_STACK_TRAMPOLINE(0x200)
+BAD_STACK_TRAMPOLINE(0x220)
 BAD_STACK_TRAMPOLINE(0x260)
 BAD_STACK_TRAMPOLINE(0x280)
 BAD_STACK_TRAMPOLINE(0x2a0)
@@ -1350,6 +1392,11 @@ _GLOBAL(__setup_base_ivors)
 
 	blr
 
+_GLOBAL(setup_altivec_ivors)
+	SET_IVOR(32, 0x200) /* AltiVec Unavailable */
+	SET_IVOR(33, 0x220) /* AltiVec Assist */
+	blr
+
 _GLOBAL(setup_perfmon_ivor)
 	SET_IVOR(35, 0x260) /* Performance Monitor */
 	blr
diff --git a/arch/powerpc/kernel/idle_book3e.S b/arch/powerpc/kernel/idle_book3e.S
index 4c7cb4008585..bfb73cc209ce 100644
--- a/arch/powerpc/kernel/idle_book3e.S
+++ b/arch/powerpc/kernel/idle_book3e.S
@@ -16,11 +16,13 @@
 #include <asm/ppc-opcode.h>
 #include <asm/processor.h>
 #include <asm/thread_info.h>
+#include <asm/epapr_hcalls.h>
 
 /* 64-bit version only for now */
 #ifdef CONFIG_PPC64
 
-_GLOBAL(book3e_idle)
+.macro BOOK3E_IDLE name loop
+_GLOBAL(\name)
 	/* Save LR for later */
 	mflr	r0
 	std	r0,16(r1)
@@ -67,7 +69,33 @@ _GLOBAL(book3e_idle)
 
 	/* We can now re-enable hard interrupts and go to sleep */
 	wrteei	1
-1:	PPC_WAIT(0)
+	\loop
+
+.endm
+
+.macro BOOK3E_IDLE_LOOP
+1:
+	PPC_WAIT(0)
 	b	1b
+.endm
+
+/* epapr_ev_idle_start below is patched with the proper hcall
+   opcodes during kernel initialization */
+.macro EPAPR_EV_IDLE_LOOP
+idle_loop:
+	LOAD_REG_IMMEDIATE(r11, EV_HCALL_TOKEN(EV_IDLE))
+
+.global epapr_ev_idle_start
+epapr_ev_idle_start:
+	li      r3, -1
+	nop
+	nop
+	nop
+	b       idle_loop
+.endm
+
+BOOK3E_IDLE epapr_ev_idle EPAPR_EV_IDLE_LOOP
+
+BOOK3E_IDLE book3e_idle BOOK3E_IDLE_LOOP
 
 #endif /* CONFIG_PPC64 */
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index df32a838dcfa..6888cad5103d 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -414,9 +414,9 @@ static void setup_page_sizes(void)
 
 #ifdef CONFIG_PPC_FSL_BOOK3E
 	unsigned int mmucfg = mfspr(SPRN_MMUCFG);
+	int fsl_mmu = mmu_has_feature(MMU_FTR_TYPE_FSL_E);
 
-	if (((mmucfg & MMUCFG_MAVN) == MMUCFG_MAVN_V1) &&
-		(mmu_has_feature(MMU_FTR_TYPE_FSL_E))) {
+	if (fsl_mmu && (mmucfg & MMUCFG_MAVN) == MMUCFG_MAVN_V1) {
 		unsigned int tlb1cfg = mfspr(SPRN_TLB1CFG);
 		unsigned int min_pg, max_pg;
 
@@ -442,6 +442,20 @@ static void setup_page_sizes(void)
 
 		goto no_indirect;
 	}
+
+	if (fsl_mmu && (mmucfg & MMUCFG_MAVN) == MMUCFG_MAVN_V2) {
+		u32 tlb1ps = mfspr(SPRN_TLB1PS);
+
+		for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) {
+			struct mmu_psize_def *def = &mmu_psize_defs[psize];
+
+			if (tlb1ps & (1U << (def->shift - 10))) {
+				def->flags |= MMU_PAGE_SIZE_DIRECT;
+			}
+		}
+
+		goto no_indirect;
+	}
 #endif
 
 	tlb0cfg = mfspr(SPRN_TLB0CFG);
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index a0dcd577fb0d..8f02b05f4c96 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -305,6 +305,40 @@ config PPC_QEMU_E500
 	  unset based on the emulated CPU (or actual host CPU in the case
 	  of KVM).
 
+if PPC64
+
+config T4240_QDS
+	bool "Freescale T4240 QDS"
+	select DEFAULT_UIMAGE
+	select E500
+	select PPC_E500MC
+	select PHYS_64BIT
+	select SWIOTLB
+	select ARCH_REQUIRE_GPIOLIB
+	select GPIO_MPC8XXX
+	select HAS_RAPIDIO
+	select PPC_EPAPR_HV_PIC
+	help
+	  This option enables support for the T4240 QDS board
+
+config B4_QDS
+	bool "Freescale B4 QDS"
+	select DEFAULT_UIMAGE
+	select E500
+	select PPC_E500MC
+	select PHYS_64BIT
+	select SWIOTLB
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	select HAS_RAPIDIO
+	select PPC_EPAPR_HV_PIC
+	help
+	  This option enables support for the B4 QDS board
+	  The B4 application development system B4 QDS is a complete
+	  debugging environment intended for engineers developing
+	  applications for the B4.
+
+endif
 endif # FSL_SOC_BOOKE
 
 config TQM85xx
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index 07d0dbb141c0..2eab37ea4a9d 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -22,6 +22,8 @@ obj-$(CONFIG_P3041_DS)    += p3041_ds.o corenet_ds.o
 obj-$(CONFIG_P4080_DS)    += p4080_ds.o corenet_ds.o
 obj-$(CONFIG_P5020_DS)    += p5020_ds.o corenet_ds.o
 obj-$(CONFIG_P5040_DS)    += p5040_ds.o corenet_ds.o
+obj-$(CONFIG_T4240_QDS)   += t4240_qds.o corenet_ds.o
+obj-$(CONFIG_B4_QDS)	  += b4_qds.o corenet_ds.o
 obj-$(CONFIG_STX_GP3)	  += stx_gp3.o
 obj-$(CONFIG_TQM85xx)	  += tqm85xx.o
 obj-$(CONFIG_SBC8548)     += sbc8548.o
diff --git a/arch/powerpc/platforms/85xx/b4_qds.c b/arch/powerpc/platforms/85xx/b4_qds.c
new file mode 100644
index 000000000000..0c6702f8b88e
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/b4_qds.c
@@ -0,0 +1,102 @@
+/*
+ * B4 QDS Setup
+ * Should apply for QDS platform of B4860 and it's personalities.
+ * viz B4860/B4420/B4220QDS
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/phy.h>
+
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <mm/mmu_decl.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+
+#include <linux/of_platform.h>
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+#include <asm/ehv_pic.h>
+
+#include "corenet_ds.h"
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init b4_qds_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+#ifdef CONFIG_SMP
+	extern struct smp_ops_t smp_85xx_ops;
+#endif
+
+	if ((of_flat_dt_is_compatible(root, "fsl,B4860QDS")) ||
+		(of_flat_dt_is_compatible(root, "fsl,B4420QDS")) ||
+			(of_flat_dt_is_compatible(root, "fsl,B4220QDS")))
+		return 1;
+
+	/* Check if we're running under the Freescale hypervisor */
+	if ((of_flat_dt_is_compatible(root, "fsl,B4860QDS-hv")) ||
+		(of_flat_dt_is_compatible(root, "fsl,B4420QDS-hv")) ||
+			(of_flat_dt_is_compatible(root, "fsl,B4220QDS-hv"))) {
+		ppc_md.init_IRQ = ehv_pic_init;
+		ppc_md.get_irq = ehv_pic_get_irq;
+		ppc_md.restart = fsl_hv_restart;
+		ppc_md.power_off = fsl_hv_halt;
+		ppc_md.halt = fsl_hv_halt;
+#ifdef CONFIG_SMP
+		/*
+		 * Disable the timebase sync operations because we can't write
+		 * to the timebase registers under the hypervisor.
+		  */
+		smp_85xx_ops.give_timebase = NULL;
+		smp_85xx_ops.take_timebase = NULL;
+#endif
+		return 1;
+	}
+
+	return 0;
+}
+
+define_machine(b4_qds) {
+	.name			= "B4 QDS",
+	.probe			= b4_qds_probe,
+	.setup_arch		= corenet_ds_setup_arch,
+	.init_IRQ		= corenet_ds_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+/* coreint doesn't play nice with lazy EE, use legacy mpic for now */
+#ifdef CONFIG_PPC64
+	.get_irq		= mpic_get_irq,
+#else
+	.get_irq		= mpic_get_coreint_irq,
+#endif
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+#ifdef CONFIG_PPC64
+	.power_save		= book3e_idle,
+#else
+	.power_save		= e500_idle,
+#endif
+};
+
+machine_arch_initcall(b4_qds, corenet_ds_publish_devices);
+
+#ifdef CONFIG_SWIOTLB
+machine_arch_initcall(b4_qds, swiotlb_setup_bus_notifier);
+#endif
diff --git a/arch/powerpc/platforms/85xx/corenet_ds.c b/arch/powerpc/platforms/85xx/corenet_ds.c
index 6f355d8c92f6..c59c617eee93 100644
--- a/arch/powerpc/platforms/85xx/corenet_ds.c
+++ b/arch/powerpc/platforms/85xx/corenet_ds.c
@@ -40,7 +40,7 @@ void __init corenet_ds_pic_init(void)
 	if (ppc_md.get_irq == mpic_get_coreint_irq)
 		flags |= MPIC_ENABLE_COREINT;
 
-	mpic = mpic_alloc(NULL, 0, flags, 0, 256, " OpenPIC  ");
+	mpic = mpic_alloc(NULL, 0, flags, 0, 512, " OpenPIC  ");
 	BUG_ON(mpic == NULL);
 
 	mpic_init(mpic);
@@ -83,6 +83,9 @@ static const struct of_device_id of_device_ids[] = {
 	{
 		.compatible	= "fsl,qoriq-pcie-v2.4",
 	},
+	{
+		.compatible	= "fsl,qoriq-pcie-v3.0",
+	},
 	/* The following two are for the Freescale hypervisor */
 	{
 		.name		= "hypervisor",
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index 148c2f2d9780..6a1759939c6b 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -201,7 +201,7 @@ static int __cpuinit smp_85xx_kick_cpu(int nr)
 		 * We don't set the BPTR register here since it already points
 		 * to the boot page properly.
 		 */
-		mpic_reset_core(hw_cpu);
+		mpic_reset_core(nr);
 
 		/*
 		 * wait until core is ready...
diff --git a/arch/powerpc/platforms/85xx/t4240_qds.c b/arch/powerpc/platforms/85xx/t4240_qds.c
new file mode 100644
index 000000000000..5998e9f33304
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/t4240_qds.c
@@ -0,0 +1,98 @@
+/*
+ * T4240 QDS Setup
+ *
+ * Maintained by Kumar Gala (see MAINTAINERS for contact information)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/phy.h>
+
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <mm/mmu_decl.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+
+#include <linux/of_platform.h>
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+#include <asm/ehv_pic.h>
+
+#include "corenet_ds.h"
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init t4240_qds_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+#ifdef CONFIG_SMP
+	extern struct smp_ops_t smp_85xx_ops;
+#endif
+
+	if (of_flat_dt_is_compatible(root, "fsl,T4240QDS"))
+		return 1;
+
+	/* Check if we're running under the Freescale hypervisor */
+	if (of_flat_dt_is_compatible(root, "fsl,T4240QDS-hv")) {
+		ppc_md.init_IRQ = ehv_pic_init;
+		ppc_md.get_irq = ehv_pic_get_irq;
+		ppc_md.restart = fsl_hv_restart;
+		ppc_md.power_off = fsl_hv_halt;
+		ppc_md.halt = fsl_hv_halt;
+#ifdef CONFIG_SMP
+		/*
+		 * Disable the timebase sync operations because we can't write
+		 * to the timebase registers under the hypervisor.
+		  */
+		smp_85xx_ops.give_timebase = NULL;
+		smp_85xx_ops.take_timebase = NULL;
+#endif
+		return 1;
+	}
+
+	return 0;
+}
+
+define_machine(t4240_qds) {
+	.name			= "T4240 QDS",
+	.probe			= t4240_qds_probe,
+	.setup_arch		= corenet_ds_setup_arch,
+	.init_IRQ		= corenet_ds_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+/* coreint doesn't play nice with lazy EE, use legacy mpic for now */
+#ifdef CONFIG_PPC64
+	.get_irq		= mpic_get_irq,
+#else
+	.get_irq		= mpic_get_coreint_irq,
+#endif
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+#ifdef CONFIG_PPC64
+	.power_save		= book3e_idle,
+#else
+	.power_save		= e500_idle,
+#endif
+};
+
+machine_arch_initcall(t4240_qds, corenet_ds_publish_devices);
+
+#ifdef CONFIG_SWIOTLB
+machine_arch_initcall(t4240_qds, swiotlb_setup_bus_notifier);
+#endif
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 9089ae71334a..34d224be93ba 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -343,7 +343,6 @@ config FSL_ULI1575
 
 config CPM
 	bool
-	select PPC_CLOCK
 
 config OF_RTC
 	bool
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 18e3b76c78d7..54f3936001aa 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -230,7 +230,7 @@ config PHYS_64BIT
 
 config ALTIVEC
 	bool "AltiVec Support"
-	depends on 6xx || POWER4
+	depends on 6xx || POWER4 || (PPC_E500MC && PPC64)
 	---help---
 	  This option enables kernel support for the Altivec extensions to the
 	  PowerPC processor. The kernel currently supports saving and restoring
diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c
index 178c99427b1c..ab02db3d02d8 100644
--- a/arch/powerpc/sysdev/fsl_msi.c
+++ b/arch/powerpc/sysdev/fsl_msi.c
@@ -333,6 +333,8 @@ static int fsl_of_msi_remove(struct platform_device *ofdev)
 	return 0;
 }
 
+static struct lock_class_key fsl_msi_irq_class;
+
 static int fsl_msi_setup_hwirq(struct fsl_msi *msi, struct platform_device *dev,
 			       int offset, int irq_index)
 {
@@ -351,7 +353,7 @@ static int fsl_msi_setup_hwirq(struct fsl_msi *msi, struct platform_device *dev,
 		dev_err(&dev->dev, "No memory for MSI cascade data\n");
 		return -ENOMEM;
 	}
-
+	irq_set_lockdep_class(virt_msir, &fsl_msi_irq_class);
 	msi->msi_virqs[irq_index] = virt_msir;
 	cascade_data->index = offset;
 	cascade_data->msi_data = msi;
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 682084dba19b..cf81d6516514 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -54,16 +54,63 @@ static void quirk_fsl_pcie_header(struct pci_dev *dev)
 	return;
 }
 
-static int __init fsl_pcie_check_link(struct pci_controller *hose)
+static int fsl_indirect_read_config(struct pci_bus *, unsigned int,
+				    int, int, u32 *);
+
+static int fsl_pcie_check_link(struct pci_controller *hose)
 {
-	u32 val;
+	u32 val = 0;
+
+	if (hose->indirect_type & PPC_INDIRECT_TYPE_FSL_CFG_REG_LINK) {
+		if (hose->ops->read == fsl_indirect_read_config) {
+			struct pci_bus bus;
+			bus.number = 0;
+			bus.sysdata = hose;
+			bus.ops = hose->ops;
+			indirect_read_config(&bus, 0, PCIE_LTSSM, 4, &val);
+		} else
+			early_read_config_dword(hose, 0, 0, PCIE_LTSSM, &val);
+		if (val < PCIE_LTSSM_L0)
+			return 1;
+	} else {
+		struct ccsr_pci __iomem *pci = hose->private_data;
+		/* for PCIe IP rev 3.0 or greater use CSR0 for link state */
+		val = (in_be32(&pci->pex_csr0) & PEX_CSR0_LTSSM_MASK)
+				>> PEX_CSR0_LTSSM_SHIFT;
+		if (val != PEX_CSR0_LTSSM_L0)
+			return 1;
+	}
 
-	early_read_config_dword(hose, 0, 0, PCIE_LTSSM, &val);
-	if (val < PCIE_LTSSM_L0)
-		return 1;
 	return 0;
 }
 
+static int fsl_indirect_read_config(struct pci_bus *bus, unsigned int devfn,
+				    int offset, int len, u32 *val)
+{
+	struct pci_controller *hose = pci_bus_to_host(bus);
+
+	if (fsl_pcie_check_link(hose))
+		hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK;
+	else
+		hose->indirect_type &= ~PPC_INDIRECT_TYPE_NO_PCIE_LINK;
+
+	return indirect_read_config(bus, devfn, offset, len, val);
+}
+
+static struct pci_ops fsl_indirect_pci_ops =
+{
+	.read = fsl_indirect_read_config,
+	.write = indirect_write_config,
+};
+
+static void __init fsl_setup_indirect_pci(struct pci_controller* hose,
+					  resource_size_t cfg_addr,
+					  resource_size_t cfg_data, u32 flags)
+{
+	setup_indirect_pci(hose, cfg_addr, cfg_data, flags);
+	hose->ops = &fsl_indirect_pci_ops;
+}
+
 #if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx)
 
 #define MAX_PHYS_ADDR_BITS	40
@@ -106,7 +153,7 @@ static int setup_one_atmu(struct ccsr_pci __iomem *pci,
 		flags |= 0x10000000; /* enable relaxed ordering */
 
 	for (i = 0; size > 0; i++) {
-		unsigned int bits = min(__ilog2(size),
+		unsigned int bits = min(ilog2(size),
 					__ffs(pci_addr | phys_addr));
 
 		if (index + i >= 5)
@@ -126,10 +173,9 @@ static int setup_one_atmu(struct ccsr_pci __iomem *pci,
 }
 
 /* atmu setup for fsl pci/pcie controller */
-static void setup_pci_atmu(struct pci_controller *hose,
-				  struct resource *rsrc)
+static void setup_pci_atmu(struct pci_controller *hose)
 {
-	struct ccsr_pci __iomem *pci;
+	struct ccsr_pci __iomem *pci = hose->private_data;
 	int i, j, n, mem_log, win_idx = 3, start_idx = 1, end_idx = 4;
 	u64 mem, sz, paddr_hi = 0;
 	u64 paddr_lo = ULLONG_MAX;
@@ -140,15 +186,6 @@ static void setup_pci_atmu(struct pci_controller *hose,
 	const u64 *reg;
 	int len;
 
-	pr_debug("PCI memory map start 0x%016llx, size 0x%016llx\n",
-		 (u64)rsrc->start, (u64)resource_size(rsrc));
-
-	pci = ioremap(rsrc->start, resource_size(rsrc));
-	if (!pci) {
-	    dev_err(hose->parent, "Unable to map ATMU registers\n");
-	    return;
-	}
-
 	if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
 		if (in_be32(&pci->block_rev1) >= PCIE_IP_REV_2_2) {
 			win_idx = 2;
@@ -196,7 +233,7 @@ static void setup_pci_atmu(struct pci_controller *hose,
 			out_be32(&pci->pow[j].powbar, (hose->io_base_phys >> 12));
 			/* Enable, IO R/W */
 			out_be32(&pci->pow[j].powar, 0x80088000
-				| (__ilog2(hose->io_resource.end
+				| (ilog2(hose->io_resource.end
 				- hose->io_resource.start + 1) - 1));
 		}
 	}
@@ -207,12 +244,12 @@ static void setup_pci_atmu(struct pci_controller *hose,
 
 	if (paddr_hi == paddr_lo) {
 		pr_err("%s: No outbound window space\n", name);
-		goto out;
+		return;
 	}
 
 	if (paddr_lo == 0) {
 		pr_err("%s: No space for inbound window\n", name);
-		goto out;
+		return;
 	}
 
 	/* setup PCSRBAR/PEXCSRBAR */
@@ -261,7 +298,7 @@ static void setup_pci_atmu(struct pci_controller *hose,
 	}
 
 	sz = min(mem, paddr_lo);
-	mem_log = __ilog2_u64(sz);
+	mem_log = ilog2(sz);
 
 	/* PCIe can overmap inbound & outbound since RX & TX are separated */
 	if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
@@ -290,7 +327,7 @@ static void setup_pci_atmu(struct pci_controller *hose,
 		 * SWIOTLB and access the full range of memory
 		 */
 		if (sz != mem) {
-			mem_log = __ilog2_u64(mem);
+			mem_log = ilog2(mem);
 
 			/* Size window up if we dont fit in exact power-of-2 */
 			if ((1ull << mem_log) != mem)
@@ -327,7 +364,7 @@ static void setup_pci_atmu(struct pci_controller *hose,
 		sz -= 1ull << mem_log;
 
 		if (sz) {
-			mem_log = __ilog2_u64(sz);
+			mem_log = ilog2(sz);
 			piwar |= (mem_log - 1);
 
 			out_be32(&pci->piw[win_idx].pitar,  paddr >> 12);
@@ -358,9 +395,6 @@ static void setup_pci_atmu(struct pci_controller *hose,
 		pr_info("%s: DMA window size is 0x%llx\n", name,
 			(u64)hose->dma_window_size);
 	}
-
-out:
-	iounmap(pci);
 }
 
 static void __init setup_pci_cmd(struct pci_controller *hose)
@@ -429,6 +463,7 @@ int __init fsl_add_bridge(struct platform_device *pdev, int is_primary)
 	const int *bus_range;
 	u8 hdr_type, progif;
 	struct device_node *dev;
+	struct ccsr_pci __iomem *pci;
 
 	dev = pdev->dev.of_node;
 
@@ -461,8 +496,18 @@ int __init fsl_add_bridge(struct platform_device *pdev, int is_primary)
 	hose->first_busno = bus_range ? bus_range[0] : 0x0;
 	hose->last_busno = bus_range ? bus_range[1] : 0xff;
 
-	setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4,
-		PPC_INDIRECT_TYPE_BIG_ENDIAN);
+	pr_debug("PCI memory map start 0x%016llx, size 0x%016llx\n",
+		 (u64)rsrc.start, (u64)resource_size(&rsrc));
+
+	pci = hose->private_data = ioremap(rsrc.start, resource_size(&rsrc));
+	if (!hose->private_data)
+		goto no_bridge;
+
+	fsl_setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4,
+			       PPC_INDIRECT_TYPE_BIG_ENDIAN);
+
+	if (in_be32(&pci->block_rev1) < PCIE_IP_REV_3_0)
+		hose->indirect_type |= PPC_INDIRECT_TYPE_FSL_CFG_REG_LINK;
 
 	if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
 		/* For PCIE read HEADER_TYPE to identify controler mode */
@@ -500,11 +545,12 @@ int __init fsl_add_bridge(struct platform_device *pdev, int is_primary)
 	pci_process_bridge_OF_ranges(hose, dev, is_primary);
 
 	/* Setup PEX window registers */
-	setup_pci_atmu(hose, &rsrc);
+	setup_pci_atmu(hose);
 
 	return 0;
 
 no_bridge:
+	iounmap(hose->private_data);
 	/* unmap cfg_data & cfg_addr separately if not on same page */
 	if (((unsigned long)hose->cfg_data & PAGE_MASK) !=
 	    ((unsigned long)hose->cfg_addr & PAGE_MASK))
@@ -681,6 +727,7 @@ static int __init mpc83xx_pcie_setup(struct pci_controller *hose,
 	WARN_ON(hose->dn->data);
 	hose->dn->data = pcie;
 	hose->ops = &mpc83xx_pcie_ops;
+	hose->indirect_type |= PPC_INDIRECT_TYPE_FSL_CFG_REG_LINK;
 
 	out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAH, 0);
 	out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAL, 0);
@@ -766,8 +813,8 @@ int __init mpc83xx_add_bridge(struct device_node *dev)
 		if (ret)
 			goto err0;
 	} else {
-		setup_indirect_pci(hose, rsrc_cfg.start,
-				   rsrc_cfg.start + 4, 0);
+		fsl_setup_indirect_pci(hose, rsrc_cfg.start,
+				       rsrc_cfg.start + 4, 0);
 	}
 
 	printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. "
@@ -836,6 +883,7 @@ static const struct of_device_id pci_ids[] = {
 	{ .compatible = "fsl,qoriq-pcie-v2.2", },
 	{ .compatible = "fsl,qoriq-pcie-v2.3", },
 	{ .compatible = "fsl,qoriq-pcie-v2.4", },
+	{ .compatible = "fsl,qoriq-pcie-v3.0", },
 
 	/*
 	 * The following entries are for compatibility with older device
diff --git a/arch/powerpc/sysdev/fsl_pci.h b/arch/powerpc/sysdev/fsl_pci.h
index c495c00c8740..72b5625330e2 100644
--- a/arch/powerpc/sysdev/fsl_pci.h
+++ b/arch/powerpc/sysdev/fsl_pci.h
@@ -14,9 +14,12 @@
 #ifndef __POWERPC_FSL_PCI_H
 #define __POWERPC_FSL_PCI_H
 
+struct platform_device;
+
 #define PCIE_LTSSM	0x0404		/* PCIE Link Training and Status */
 #define PCIE_LTSSM_L0	0x16		/* L0 state */
 #define PCIE_IP_REV_2_2		0x02080202 /* PCIE IP block version Rev2.2 */
+#define PCIE_IP_REV_3_0		0x02080300 /* PCIE IP block version Rev3.0 */
 #define PIWAR_EN		0x80000000	/* Enable */
 #define PIWAR_PF		0x20000000	/* prefetch */
 #define PIWAR_TGI_LOCAL		0x00f00000	/* target - local memory */
@@ -89,6 +92,16 @@ struct ccsr_pci {
 	__be32	pex_err_cap_r1;		/* 0x.e2c - PCIE error capture register 0 */
 	__be32	pex_err_cap_r2;		/* 0x.e30 - PCIE error capture register 0 */
 	__be32	pex_err_cap_r3;		/* 0x.e34 - PCIE error capture register 0 */
+	u8	res_e38[200];
+	__be32	pdb_stat;		/* 0x.f00 - PCIE Debug Status */
+	u8	res_f04[16];
+	__be32	pex_csr0;		/* 0x.f14 - PEX Control/Status register 0*/
+#define PEX_CSR0_LTSSM_MASK	0xFC
+#define PEX_CSR0_LTSSM_SHIFT	2
+#define PEX_CSR0_LTSSM_L0	0x11
+	__be32	pex_csr1;		/* 0x.f18 - PEX Control/Status register 1*/
+	u8	res_f1c[228];
+
 };
 
 extern int fsl_add_bridge(struct platform_device *pdev, int is_primary);
diff --git a/arch/powerpc/sysdev/indirect_pci.c b/arch/powerpc/sysdev/indirect_pci.c
index 82fdad885d20..c6c8b526a4f6 100644
--- a/arch/powerpc/sysdev/indirect_pci.c
+++ b/arch/powerpc/sysdev/indirect_pci.c
@@ -20,9 +20,8 @@
 #include <asm/pci-bridge.h>
 #include <asm/machdep.h>
 
-static int
-indirect_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
-		     int len, u32 *val)
+int indirect_read_config(struct pci_bus *bus, unsigned int devfn,
+			 int offset, int len, u32 *val)
 {
 	struct pci_controller *hose = pci_bus_to_host(bus);
 	volatile void __iomem *cfg_data;
@@ -78,9 +77,8 @@ indirect_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
 	return PCIBIOS_SUCCESSFUL;
 }
 
-static int
-indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
-		      int len, u32 val)
+int indirect_write_config(struct pci_bus *bus, unsigned int devfn,
+			  int offset, int len, u32 val)
 {
 	struct pci_controller *hose = pci_bus_to_host(bus);
 	volatile void __iomem *cfg_data;
diff --git a/arch/powerpc/sysdev/qe_lib/Kconfig b/arch/powerpc/sysdev/qe_lib/Kconfig
index 41ac3dfac98e..3c251993bacd 100644
--- a/arch/powerpc/sysdev/qe_lib/Kconfig
+++ b/arch/powerpc/sysdev/qe_lib/Kconfig
@@ -22,6 +22,6 @@ config UCC
 
 config QE_USB
 	bool
-	default y if USB_GADGET_FSL_QE
+	default y if USB_FSL_QE
 	help
 	  QE USB Controller support