1 files changed, 227 insertions, 0 deletions

diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c
index 7a0cb6064f83..296f9e747fac 100644
--- a/drivers/dma/fsldma.c
+++ b/drivers/dma/fsldma.c
@@ -34,6 +34,7 @@
 #include <linux/dmapool.h>
 #include <linux/of_platform.h>
 
+#include <asm/fsldma.h>
 #include "fsldma.h"
 
 static void dma_init(struct fsl_dma_chan *fsl_chan)
@@ -552,6 +553,229 @@ fail:
 }
 
 /**
+ * fsl_dma_prep_slave_sg - prepare descriptors for a DMA_SLAVE transaction
+ * @chan: DMA channel
+ * @sgl: scatterlist to transfer to/from
+ * @sg_len: number of entries in @scatterlist
+ * @direction: DMA direction
+ * @flags: DMAEngine flags
+ *
+ * Prepare a set of descriptors for a DMA_SLAVE transaction. Following the
+ * DMA_SLAVE API, this gets the device-specific information from the
+ * chan->private variable.
+ */
+static struct dma_async_tx_descriptor *fsl_dma_prep_slave_sg(
+	struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len,
+	enum dma_data_direction direction, unsigned long flags)
+{
+	struct fsl_dma_chan *fsl_chan;
+	struct fsl_desc_sw *first = NULL, *prev = NULL, *new = NULL;
+	struct fsl_dma_slave *slave;
+	struct list_head *tx_list;
+	size_t copy;
+
+	int i;
+	struct scatterlist *sg;
+	size_t sg_used;
+	size_t hw_used;
+	struct fsl_dma_hw_addr *hw;
+	dma_addr_t dma_dst, dma_src;
+
+	if (!chan)
+		return NULL;
+
+	if (!chan->private)
+		return NULL;
+
+	fsl_chan = to_fsl_chan(chan);
+	slave = chan->private;
+
+	if (list_empty(&slave->addresses))
+		return NULL;
+
+	hw = list_first_entry(&slave->addresses, struct fsl_dma_hw_addr, entry);
+	hw_used = 0;
+
+	/*
+	 * Build the hardware transaction to copy from the scatterlist to
+	 * the hardware, or from the hardware to the scatterlist
+	 *
+	 * If you are copying from the hardware to the scatterlist and it
+	 * takes two hardware entries to fill an entire page, then both
+	 * hardware entries will be coalesced into the same page
+	 *
+	 * If you are copying from the scatterlist to the hardware and a
+	 * single page can fill two hardware entries, then the data will
+	 * be read out of the page into the first hardware entry, and so on
+	 */
+	for_each_sg(sgl, sg, sg_len, i) {
+		sg_used = 0;
+
+		/* Loop until the entire scatterlist entry is used */
+		while (sg_used < sg_dma_len(sg)) {
+
+			/*
+			 * If we've used up the current hardware address/length
+			 * pair, we need to load a new one
+			 *
+			 * This is done in a while loop so that descriptors with
+			 * length == 0 will be skipped
+			 */
+			while (hw_used >= hw->length) {
+
+				/*
+				 * If the current hardware entry is the last
+				 * entry in the list, we're finished
+				 */
+				if (list_is_last(&hw->entry, &slave->addresses))
+					goto finished;
+
+				/* Get the next hardware address/length pair */
+				hw = list_entry(hw->entry.next,
+						struct fsl_dma_hw_addr, entry);
+				hw_used = 0;
+			}
+
+			/* Allocate the link descriptor from DMA pool */
+			new = fsl_dma_alloc_descriptor(fsl_chan);
+			if (!new) {
+				dev_err(fsl_chan->dev, "No free memory for "
+						       "link descriptor\n");
+				goto fail;
+			}
+#ifdef FSL_DMA_LD_DEBUG
+			dev_dbg(fsl_chan->dev, "new link desc alloc %p\n", new);
+#endif
+
+			/*
+			 * Calculate the maximum number of bytes to transfer,
+			 * making sure it is less than the DMA controller limit
+			 */
+			copy = min_t(size_t, sg_dma_len(sg) - sg_used,
+					     hw->length - hw_used);
+			copy = min_t(size_t, copy, FSL_DMA_BCR_MAX_CNT);
+
+			/*
+			 * DMA_FROM_DEVICE
+			 * from the hardware to the scatterlist
+			 *
+			 * DMA_TO_DEVICE
+			 * from the scatterlist to the hardware
+			 */
+			if (direction == DMA_FROM_DEVICE) {
+				dma_src = hw->address + hw_used;
+				dma_dst = sg_dma_address(sg) + sg_used;
+			} else {
+				dma_src = sg_dma_address(sg) + sg_used;
+				dma_dst = hw->address + hw_used;
+			}
+
+			/* Fill in the descriptor */
+			set_desc_cnt(fsl_chan, &new->hw, copy);
+			set_desc_src(fsl_chan, &new->hw, dma_src);
+			set_desc_dest(fsl_chan, &new->hw, dma_dst);
+
+			/*
+			 * If this is not the first descriptor, chain the
+			 * current descriptor after the previous descriptor
+			 */
+			if (!first) {
+				first = new;
+			} else {
+				set_desc_next(fsl_chan, &prev->hw,
+					      new->async_tx.phys);
+			}
+
+			new->async_tx.cookie = 0;
+			async_tx_ack(&new->async_tx);
+
+			prev = new;
+			sg_used += copy;
+			hw_used += copy;
+
+			/* Insert the link descriptor into the LD ring */
+			list_add_tail(&new->node, &first->tx_list);
+		}
+	}
+
+finished:
+
+	/* All of the hardware address/length pairs had length == 0 */
+	if (!first || !new)
+		return NULL;
+
+	new->async_tx.flags = flags;
+	new->async_tx.cookie = -EBUSY;
+
+	/* Set End-of-link to the last link descriptor of new list */
+	set_ld_eol(fsl_chan, new);
+
+	/* Enable extra controller features */
+	if (fsl_chan->set_src_loop_size)
+		fsl_chan->set_src_loop_size(fsl_chan, slave->src_loop_size);
+
+	if (fsl_chan->set_dest_loop_size)
+		fsl_chan->set_dest_loop_size(fsl_chan, slave->dst_loop_size);
+
+	if (fsl_chan->toggle_ext_start)
+		fsl_chan->toggle_ext_start(fsl_chan, slave->external_start);
+
+	if (fsl_chan->toggle_ext_pause)
+		fsl_chan->toggle_ext_pause(fsl_chan, slave->external_pause);
+
+	if (fsl_chan->set_request_count)
+		fsl_chan->set_request_count(fsl_chan, slave->request_count);
+
+	return &first->async_tx;
+
+fail:
+	/* If first was not set, then we failed to allocate the very first
+	 * descriptor, and we're done */
+	if (!first)
+		return NULL;
+
+	/*
+	 * First is set, so all of the descriptors we allocated have been added
+	 * to first->tx_list, INCLUDING "first" itself. Therefore we
+	 * must traverse the list backwards freeing each descriptor in turn
+	 *
+	 * We're re-using variables for the loop, oh well
+	 */
+	tx_list = &first->tx_list;
+	list_for_each_entry_safe_reverse(new, prev, tx_list, node) {
+		list_del_init(&new->node);
+		dma_pool_free(fsl_chan->desc_pool, new, new->async_tx.phys);
+	}
+
+	return NULL;
+}
+
+static void fsl_dma_device_terminate_all(struct dma_chan *chan)
+{
+	struct fsl_dma_chan *fsl_chan;
+	struct fsl_desc_sw *desc, *tmp;
+	unsigned long flags;
+
+	if (!chan)
+		return;
+
+	fsl_chan = to_fsl_chan(chan);
+
+	/* Halt the DMA engine */
+	dma_halt(fsl_chan);
+
+	spin_lock_irqsave(&fsl_chan->desc_lock, flags);
+
+	/* Remove and free all of the descriptors in the LD queue */
+	list_for_each_entry_safe(desc, tmp, &fsl_chan->ld_queue, node) {
+		list_del(&desc->node);
+		dma_pool_free(fsl_chan->desc_pool, desc, desc->async_tx.phys);
+	}
+
+	spin_unlock_irqrestore(&fsl_chan->desc_lock, flags);
+}
+
+/**
  * fsl_dma_update_completed_cookie - Update the completed cookie.
  * @fsl_chan : Freescale DMA channel
  */
@@ -977,12 +1201,15 @@ static int __devinit of_fsl_dma_probe(struct of_device *dev,
 
 	dma_cap_set(DMA_MEMCPY, fdev->common.cap_mask);
 	dma_cap_set(DMA_INTERRUPT, fdev->common.cap_mask);
+	dma_cap_set(DMA_SLAVE, fdev->common.cap_mask);
 	fdev->common.device_alloc_chan_resources = fsl_dma_alloc_chan_resources;
 	fdev->common.device_free_chan_resources = fsl_dma_free_chan_resources;
 	fdev->common.device_prep_dma_interrupt = fsl_dma_prep_interrupt;
 	fdev->common.device_prep_dma_memcpy = fsl_dma_prep_memcpy;
 	fdev->common.device_is_tx_complete = fsl_dma_is_complete;
 	fdev->common.device_issue_pending = fsl_dma_memcpy_issue_pending;
+	fdev->common.device_prep_slave_sg = fsl_dma_prep_slave_sg;
+	fdev->common.device_terminate_all = fsl_dma_device_terminate_all;
 	fdev->common.dev = &dev->dev;
 
 	fdev->irq = irq_of_parse_and_map(dev->node, 0);