path: root/unotools/source/config/compatibility.cxx

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the LibreOffice project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */

#include <unotools/compatibility.hxx>
#include <unotools/configmgr.hxx>
#include <unotools/configitem.hxx>
#include <unotools/syslocale.hxx>
#include <tools/debug.hxx>
#include <com/sun/star/uno/Any.hxx>
#include <com/sun/star/uno/Sequence.hxx>

#include <vector>

#include <itemholder1.hxx>

#include <algorithm>

//_________________________________________________________________________________________________________________
//  namespaces
//_________________________________________________________________________________________________________________

using namespace ::std;
using namespace ::utl;
using namespace ::rtl;
using namespace ::osl;
using namespace ::com::sun::star::uno;
using namespace ::com::sun::star::beans;

#define ROOTNODE_OPTIONS        OUString( "Office.Compatibility/" )
#define PATHDELIMITER           OUString( "/" )
#define SETNODE_ALLFILEFORMATS  OUString( "AllFileFormats" )

#define PROPERTYNAME_NAME               COMPATIBILITY_PROPERTYNAME_NAME
#define PROPERTYNAME_MODULE             COMPATIBILITY_PROPERTYNAME_MODULE
#define PROPERTYNAME_USEPRTMETRICS      COMPATIBILITY_PROPERTYNAME_USEPRTMETRICS
#define PROPERTYNAME_ADDSPACING         COMPATIBILITY_PROPERTYNAME_ADDSPACING
#define PROPERTYNAME_ADDSPACINGATPAGES  COMPATIBILITY_PROPERTYNAME_ADDSPACINGATPAGES
#define PROPERTYNAME_USEOURTABSTOPS     COMPATIBILITY_PROPERTYNAME_USEOURTABSTOPS
#define PROPERTYNAME_NOEXTLEADING       COMPATIBILITY_PROPERTYNAME_NOEXTLEADING
#define PROPERTYNAME_USELINESPACING     COMPATIBILITY_PROPERTYNAME_USELINESPACING
#define PROPERTYNAME_ADDTABLESPACING    COMPATIBILITY_PROPERTYNAME_ADDTABLESPACING
#define PROPERTYNAME_USEOBJPOS          COMPATIBILITY_PROPERTYNAME_USEOBJECTPOSITIONING
#define PROPERTYNAME_USEOURTEXTWRAP     COMPATIBILITY_PROPERTYNAME_USEOURTEXTWRAPPING
#define PROPERTYNAME_CONSIDERWRAPSTYLE  COMPATIBILITY_PROPERTYNAME_CONSIDERWRAPPINGSTYLE
#define PROPERTYNAME_EXPANDWORDSPACE    COMPATIBILITY_PROPERTYNAME_EXPANDWORDSPACE

#define PROPERTYCOUNT                   13

#define OFFSET_NAME                     0
#define OFFSET_MODULE                   1
#define OFFSET_USEPRTMETRICS            2
#define OFFSET_ADDSPACING               3
#define OFFSET_ADDSPACINGATPAGES        4
#define OFFSET_USEOURTABSTOPS           5
#define OFFSET_NOEXTLEADING             6
#define OFFSET_USELINESPACING           7
#define OFFSET_ADDTABLESPACING          8
#define OFFSET_USEOBJPOS                9
#define OFFSET_USEOURTEXTWRAPPING       10
#define OFFSET_CONSIDERWRAPPINGSTYLE    11
#define OFFSET_EXPANDWORDSPACE          12

//_________________________________________________________________________________________________________________
//  private declarations!
//_________________________________________________________________________________________________________________

/*-****************************************************************************************************************
    @descr  struct to hold information about one compatibility entry
****************************************************************************************************************-*/
struct SvtCompatibilityEntry
{
    public:
        SvtCompatibilityEntry() :
            bUsePrtMetrics( false ), bAddSpacing( false ),
            bAddSpacingAtPages( false ), bUseOurTabStops( false ),
            bNoExtLeading( false ), bUseLineSpacing( false ),
            bAddTableSpacing( false ), bUseObjPos( false ),
            bUseOurTextWrapping( false ), bConsiderWrappingStyle( false ),
            bExpandWordSpace( true ) {}
        SvtCompatibilityEntry(
            const OUString& _rName, const OUString& _rNewModule ) :
                sName( _rName ), sModule( _rNewModule ),
                bUsePrtMetrics( false ), bAddSpacing( false ),
                bAddSpacingAtPages( false ), bUseOurTabStops( false ),
                bNoExtLeading( false ), bUseLineSpacing( false ),
                bAddTableSpacing( false ), bUseObjPos( false ),
                bUseOurTextWrapping( false ), bConsiderWrappingStyle( false ),
                bExpandWordSpace( true ) {}

        inline void     SetUsePrtMetrics( bool _bSet ) { bUsePrtMetrics = _bSet; }
        inline void     SetAddSpacing( bool _bSet ) { bAddSpacing = _bSet; }
        inline void     SetAddSpacingAtPages( bool _bSet ) { bAddSpacingAtPages = _bSet; }
        inline void     SetUseOurTabStops( bool _bSet ) { bUseOurTabStops = _bSet; }
        inline void     SetNoExtLeading( bool _bSet ) { bNoExtLeading = _bSet; }
        inline void     SetUseLineSpacing( bool _bSet ) { bUseLineSpacing = _bSet; }
        inline void     SetAddTableSpacing( bool _bSet ) { bAddTableSpacing = _bSet; }
        inline void     SetUseObjPos( bool _bSet ) { bUseObjPos = _bSet; }
        inline void     SetUseOurTextWrapping( bool _bSet ) { bUseOurTextWrapping = _bSet; }
        inline void     SetConsiderWrappingStyle( bool _bSet ) { bConsiderWrappingStyle = _bSet; }
        inline void     SetExpandWordSpace( bool _bSet ) { bExpandWordSpace = _bSet; }

    public:
        OUString    sName;
        OUString    sModule;
        bool        bUsePrtMetrics;
        bool        bAddSpacing;
        bool        bAddSpacingAtPages;
        bool        bUseOurTabStops;
        bool        bNoExtLeading;
        bool        bUseLineSpacing;
        bool        bAddTableSpacing;
        bool        bUseObjPos;
        bool        bUseOurTextWrapping;
        bool        bConsiderWrappingStyle;
        bool        bExpandWordSpace;
};

/*-****************************************************************************************************************
    @descr  support simple menu structures and operations on it
****************************************************************************************************************-*/
class SvtCompatibility
{
    public:
        //---------------------------------------------------------------------------------------------------------
        // append one entry
        void AppendEntry( const SvtCompatibilityEntry& rEntry )
        {
            lEntries.push_back( rEntry );
        }

        //---------------------------------------------------------------------------------------------------------
        // the only way to free memory!
        void Clear()
        {
            lEntries.clear();
        }

        //---------------------------------------------------------------------------------------------------------
        // convert internal list to external format
        Sequence< Sequence< PropertyValue > > GetList() const
        {
            sal_Int32 nCount = (sal_Int32)lEntries.size();
            sal_Int32 nStep = 0;
            Sequence< PropertyValue > lProperties( PROPERTYCOUNT );
            Sequence< Sequence< PropertyValue > > lResult( nCount );
            const vector< SvtCompatibilityEntry >* pList = &lEntries;

            lProperties[ OFFSET_NAME ].Name = PROPERTYNAME_NAME;
            lProperties[ OFFSET_MODULE ].Name = PROPERTYNAME_MODULE;
            lProperties[ OFFSET_USEPRTMETRICS ].Name = PROPERTYNAME_USEPRTMETRICS;
            lProperties[ OFFSET_ADDSPACING ].Name = PROPERTYNAME_ADDSPACING;
            lProperties[ OFFSET_ADDSPACINGATPAGES ].Name = PROPERTYNAME_ADDSPACINGATPAGES;
            lProperties[ OFFSET_USEOURTABSTOPS ].Name = PROPERTYNAME_USEOURTABSTOPS;
            lProperties[ OFFSET_NOEXTLEADING ].Name = PROPERTYNAME_NOEXTLEADING;
            lProperties[ OFFSET_USELINESPACING ].Name = PROPERTYNAME_USELINESPACING;
            lProperties[ OFFSET_ADDTABLESPACING ].Name = PROPERTYNAME_ADDTABLESPACING;
            lProperties[ OFFSET_USEOBJPOS ].Name = PROPERTYNAME_USEOBJPOS;
            lProperties[ OFFSET_USEOURTEXTWRAPPING ].Name = PROPERTYNAME_USEOURTEXTWRAP;
            lProperties[ OFFSET_CONSIDERWRAPPINGSTYLE ].Name = PROPERTYNAME_CONSIDERWRAPSTYLE;
            lProperties[ OFFSET_EXPANDWORDSPACE ].Name = PROPERTYNAME_EXPANDWORDSPACE;

            for ( vector< SvtCompatibilityEntry >::const_iterator pItem = pList->begin();
                  pItem != pList->end(); ++pItem )
            {
                lProperties[ OFFSET_NAME ].Value <<= pItem->sName;
                lProperties[ OFFSET_MODULE ].Value <<= pItem->sModule;
                lProperties[ OFFSET_USEPRTMETRICS ].Value <<= pItem->bUsePrtMetrics;
                lProperties[ OFFSET_ADDSPACING ].Value <<= pItem->bAddSpacing;
                lProperties[ OFFSET_ADDSPACINGATPAGES ].Value <<= pItem->bAddSpacingAtPages;
                lProperties[ OFFSET_USEOURTABSTOPS ].Value <<= pItem->bUseOurTabStops;
                lProperties[ OFFSET_NOEXTLEADING ].Value <<= pItem->bNoExtLeading;
                lProperties[ OFFSET_USELINESPACING ].Value <<= pItem->bUseLineSpacing;
                lProperties[ OFFSET_ADDTABLESPACING ].Value <<= pItem->bAddTableSpacing;
                lProperties[ OFFSET_USEOBJPOS ].Value <<= pItem->bUseObjPos;
                lProperties[ OFFSET_USEOURTEXTWRAPPING ].Value <<= pItem->bUseOurTextWrapping;
                lProperties[ OFFSET_CONSIDERWRAPPINGSTYLE ].Value <<= pItem->bConsiderWrappingStyle;
                lProperties[ OFFSET_EXPANDWORDSPACE ].Value <<= pItem->bExpandWordSpace;
                lResult[ nStep ] = lProperties;
                ++nStep;
            }

            return lResult;
        }

        int size() const
        {
            return lEntries.size();
        }

        const SvtCompatibilityEntry& operator[]( int i ) const
        {
            return lEntries[i];
        }

    private:
        vector< SvtCompatibilityEntry > lEntries;
};

class SvtCompatibilityOptions_Impl : public ConfigItem
{
    //-------------------------------------------------------------------------------------------------------------
    //  public methods
    //-------------------------------------------------------------------------------------------------------------

    public:

        //---------------------------------------------------------------------------------------------------------
        //  constructor / destructor
        //---------------------------------------------------------------------------------------------------------

         SvtCompatibilityOptions_Impl();
        ~SvtCompatibilityOptions_Impl();

        void SetDefault( OUString sName, bool bValue );

        //---------------------------------------------------------------------------------------------------------
        //  overloaded methods of baseclass
        //---------------------------------------------------------------------------------------------------------

        /*-****************************************************************************************************//**
            @short      called for notify of configmanager
            @descr      These method is called from the ConfigManager before application ends or from the
                         PropertyChangeListener if the sub tree broadcasts changes. You must update your
                        internal values.

            @seealso    baseclass ConfigItem

            @param      "lPropertyNames" is the list of properties which should be updated.
            @return     -

            @onerror    -
        *//*-*****************************************************************************************************/

        virtual void Notify( const Sequence< OUString >& lPropertyNames );

        /*-****************************************************************************************************//**
            @short      write changes to configuration
            @descr      These method writes the changed values into the sub tree
                        and should always called in our destructor to guarantee consistency of config data.

            @seealso    baseclass ConfigItem

            @param      -
            @return     -

            @onerror    -
        *//*-*****************************************************************************************************/

        virtual void Commit();

        //---------------------------------------------------------------------------------------------------------
        //  public interface
        //---------------------------------------------------------------------------------------------------------

        /*-****************************************************************************************************//**
            @short      base implementation of public interface for "SvtCompatibilityOptions"!
            @descr      These class is used as static member of "SvtCompatibilityOptions" ...
                        => The code exist only for one time and isn't duplicated for every instance!

            @seealso    -

            @param      -
            @return     -

            @onerror    -
        *//*-*****************************************************************************************************/

        void                                    Clear();
        Sequence< Sequence< PropertyValue > >   GetList() const;
        void                                    AppendItem( const OUString& _sName,
                                                            const OUString& _sModule,
                                                            bool _bUsePrtMetrics,
                                                            bool _bAddSpacing,
                                                            bool _bAddSpacingAtPages,
                                                            bool _bUseOurTabStops,
                                                            bool _bNoExtLeading,
                                                            bool _bUseLineSpacing,
                                                            bool _bAddTableSpacing,
                                                            bool _bUseObjPos,
                                                            bool _bUseOurTextWrapping,
                                                            bool _bConsiderWrappingStyle,
                                                            bool _bExpandWordSpace );

        inline bool IsUsePrtDevice() const { return m_aDefOptions.bUsePrtMetrics; }
        inline bool IsAddSpacing() const { return m_aDefOptions.bAddSpacing; }
        inline bool IsAddSpacingAtPages() const { return m_aDefOptions.bAddSpacingAtPages; }
        inline bool IsUseOurTabStops() const { return m_aDefOptions.bUseOurTabStops; }
        inline bool IsNoExtLeading() const { return m_aDefOptions.bNoExtLeading; }
        inline bool IsUseLineSpacing() const { return m_aDefOptions.bUseLineSpacing; }
        inline bool IsAddTableSpacing() const { return m_aDefOptions.bAddTableSpacing; }
        inline bool IsUseObjPos() const { return m_aDefOptions.bUseObjPos; }
        inline bool IsUseOurTextWrapping() const { return m_aDefOptions.bUseOurTextWrapping; }
        inline bool IsConsiderWrappingStyle() const { return m_aDefOptions.bConsiderWrappingStyle; }
        inline bool IsExpandWordSpace() const { return m_aDefOptions.bExpandWordSpace; }

    //-------------------------------------------------------------------------------------------------------------
    //  private methods
    //-------------------------------------------------------------------------------------------------------------

    private:

        /*-****************************************************************************************************//**
            @short      return list of key names of our configuration management which represent one module tree
            @descr      These methods return the current list of key names! We need it to get needed values from our
                        configuration management and support dynamical menu item lists!

            @seealso    -

            @param      -
            @return     A list of configuration key names is returned.

            @onerror    -
        *//*-*****************************************************************************************************/

        Sequence< OUString > impl_GetPropertyNames( Sequence< OUString >& rItems );

        /*-****************************************************************************************************//**
            @short      expand the list for all well known properties to destination
            @descr      -
            @attention  -

            @seealso    method impl_GetPropertyNames()

            @param      "lSource"      ,   original list
            @param      "lDestination" ,   destination of operation
            @return     A list of configuration key names is returned.

            @onerror    -
        *//*-*****************************************************************************************************/

        void impl_ExpandPropertyNames( const Sequence< OUString >& lSource,
                                             Sequence< OUString >& lDestination );

    //-------------------------------------------------------------------------------------------------------------
    //  private member
    //-------------------------------------------------------------------------------------------------------------

    private:

        SvtCompatibility        m_aOptions;
        SvtCompatibilityEntry   m_aDefOptions;
};

//*****************************************************************************************************************
//  constructor
//*****************************************************************************************************************
SvtCompatibilityOptions_Impl::SvtCompatibilityOptions_Impl()
    // Init baseclasses first
    :   ConfigItem( ROOTNODE_OPTIONS )
    // Init member then...
{
    // Get names and values of all accessible menu entries and fill internal structures.
    // See impl_GetPropertyNames() for further information.
    Sequence< OUString > lNodes;
    Sequence< OUString > lNames = impl_GetPropertyNames( lNodes );
    sal_uInt32 nCount = lNodes.getLength();
    Sequence< Any > lValues = GetProperties( lNames );

    // Safe impossible cases.
    // We need values from ALL configuration keys.
    // Follow assignment use order of values in relation to our list of key names!
    DBG_ASSERT( !( lNames.getLength()!=lValues.getLength() ), "SvtCompatibilityOptions_Impl::SvtCompatibilityOptions_Impl()\nI miss some values of configuration keys!\n" );

    SvtCompatibilityEntry aItem;
    sal_uInt32 nItem = 0;
    sal_uInt32 nPosition = 0;

    // Get names/values for new menu.
    // 4 subkeys for every item!
    bool bDefaultFound = false;
    for( nItem = 0; nItem < nCount; ++nItem )
    {
        aItem.sName = lNodes[ nItem ];
        lValues[ nPosition++ ] >>= aItem.sModule;
        lValues[ nPosition++ ] >>= aItem.bUsePrtMetrics;
        lValues[ nPosition++ ] >>= aItem.bAddSpacing;
        lValues[ nPosition++ ] >>= aItem.bAddSpacingAtPages;
        lValues[ nPosition++ ] >>= aItem.bUseOurTabStops;
        lValues[ nPosition++ ] >>= aItem.bNoExtLeading;
        lValues[ nPosition++ ] >>= aItem.bUseLineSpacing;
        lValues[ nPosition++ ] >>= aItem.bAddTableSpacing;
        lValues[ nPosition++ ] >>= aItem.bUseObjPos;
        lValues[ nPosition++ ] >>= aItem.bUseOurTextWrapping;
        lValues[ nPosition++ ] >>= aItem.bConsiderWrappingStyle;
        lValues[ nPosition++ ] >>= aItem.bExpandWordSpace;
        m_aOptions.AppendEntry( aItem );

        if ( !bDefaultFound && aItem.sName.equals( COMPATIBILITY_DEFAULT_NAME ) != sal_False )
        {
            SvtSysLocale aSysLocale;
            com::sun::star::lang::Locale aLocale = aSysLocale.GetLanguageTag().getLocale();
            if ( aLocale.Language == "zh" || aLocale.Language == "ja" || aLocale.Language == "ko" )
                aItem.bExpandWordSpace = false;

            m_aDefOptions = aItem;
            bDefaultFound = true;
        }
    }
}

//*****************************************************************************************************************
//  destructor
//*****************************************************************************************************************
SvtCompatibilityOptions_Impl::~SvtCompatibilityOptions_Impl()
{
    // We must save our current values .. if user forget it!
    if( IsModified() == sal_True )
    {
        Commit();
    }
}

void SvtCompatibilityOptions_Impl::SetDefault( OUString sName, bool bValue )
{
    if ( COMPATIBILITY_PROPERTYNAME_USEPRTMETRICS.equals( sName ) )
        m_aDefOptions.SetUsePrtMetrics( bValue );
    else if ( COMPATIBILITY_PROPERTYNAME_ADDSPACING.equals( sName ) )
        m_aDefOptions.SetAddSpacing( bValue );
    else if ( COMPATIBILITY_PROPERTYNAME_ADDSPACINGATPAGES.equals( sName ) )
        m_aDefOptions.SetAddSpacingAtPages( bValue );
    else if ( COMPATIBILITY_PROPERTYNAME_USEOURTABSTOPS.equals( sName ) )
        m_aDefOptions.SetUseOurTabStops( bValue );
    else if ( COMPATIBILITY_PROPERTYNAME_NOEXTLEADING.equals( sName ) )
        m_aDefOptions.SetNoExtLeading( bValue );
    else if ( COMPATIBILITY_PROPERTYNAME_USELINESPACING.equals( sName ) )
        m_aDefOptions.SetUseLineSpacing( bValue );
    else if ( COMPATIBILITY_PROPERTYNAME_ADDTABLESPACING.equals( sName ) )
        m_aDefOptions.SetAddTableSpacing( bValue );
    else if ( COMPATIBILITY_PROPERTYNAME_USEOBJECTPOSITIONING.equals( sName ) )
        m_aDefOptions.SetUseObjPos( bValue );
    else if ( COMPATIBILITY_PROPERTYNAME_USEOURTEXTWRAPPING.equals( sName ) )
        m_aDefOptions.SetUseOurTextWrapping( bValue );
    else if ( COMPATIBILITY_PROPERTYNAME_CONSIDERWRAPPINGSTYLE.equals( sName ) )
        m_aDefOptions.SetConsiderWrappingStyle( bValue );
    else if ( COMPATIBILITY_PROPERTYNAME_EXPANDWORDSPACE.equals( sName ) )
        m_aDefOptions.SetExpandWordSpace( bValue );
}

//*****************************************************************************************************************
//  public method
//*****************************************************************************************************************
void SvtCompatibilityOptions_Impl::Notify( const Sequence< OUString >& )
{
    DBG_ASSERT( sal_False, "SvtCompatibilityOptions_Impl::Notify()\nNot implemented yet! I don't know how I can handle a dynamical list of unknown properties ...\n" );
}

//*****************************************************************************************************************
//  public method
//*****************************************************************************************************************
void SvtCompatibilityOptions_Impl::Commit()
{
    // Write all properties!
    // Delete complete set first.
    ClearNodeSet( SETNODE_ALLFILEFORMATS );

    SvtCompatibilityEntry aItem;
    OUString sNode;
    Sequence< PropertyValue > lPropertyValues( PROPERTYCOUNT - 1 );
    sal_uInt32 nItem = 0;
    sal_uInt32 nNewCount = m_aOptions.size();
    for( nItem = 0; nItem < nNewCount; ++nItem )
    {
        aItem = m_aOptions[ nItem ];
        sNode = SETNODE_ALLFILEFORMATS + PATHDELIMITER + aItem.sName + PATHDELIMITER;

        lPropertyValues[ OFFSET_MODULE - 1                  ].Name = sNode + PROPERTYNAME_MODULE;
        lPropertyValues[ OFFSET_USEPRTMETRICS - 1           ].Name = sNode + PROPERTYNAME_USEPRTMETRICS;
        lPropertyValues[ OFFSET_ADDSPACING - 1              ].Name = sNode + PROPERTYNAME_ADDSPACING;
        lPropertyValues[ OFFSET_ADDSPACINGATPAGES - 1       ].Name = sNode + PROPERTYNAME_ADDSPACINGATPAGES;
        lPropertyValues[ OFFSET_USEOURTABSTOPS - 1          ].Name = sNode + PROPERTYNAME_USEOURTABSTOPS;
        lPropertyValues[ OFFSET_NOEXTLEADING - 1            ].Name = sNode + PROPERTYNAME_NOEXTLEADING;
        lPropertyValues[ OFFSET_USELINESPACING - 1          ].Name = sNode + PROPERTYNAME_USELINESPACING;
        lPropertyValues[ OFFSET_ADDTABLESPACING - 1         ].Name = sNode + PROPERTYNAME_ADDTABLESPACING;
        lPropertyValues[ OFFSET_USEOBJPOS - 1               ].Name = sNode + PROPERTYNAME_USEOBJPOS;
        lPropertyValues[ OFFSET_USEOURTEXTWRAPPING - 1      ].Name = sNode + PROPERTYNAME_USEOURTEXTWRAP;
        lPropertyValues[ OFFSET_CONSIDERWRAPPINGSTYLE - 1   ].Name = sNode + PROPERTYNAME_CONSIDERWRAPSTYLE;
        lPropertyValues[ OFFSET_EXPANDWORDSPACE - 1         ].Name = sNode + PROPERTYNAME_EXPANDWORDSPACE;

        lPropertyValues[ OFFSET_MODULE - 1                  ].Value <<= aItem.sModule;
        lPropertyValues[ OFFSET_USEPRTMETRICS - 1           ].Value <<= aItem.bUsePrtMetrics;
        lPropertyValues[ OFFSET_ADDSPACING - 1              ].Value <<= aItem.bAddSpacing;
        lPropertyValues[ OFFSET_ADDSPACINGATPAGES - 1       ].Value <<= aItem.bAddSpacingAtPages;
        lPropertyValues[ OFFSET_USEOURTABSTOPS - 1          ].Value <<= aItem.bUseOurTabStops;
        lPropertyValues[ OFFSET_NOEXTLEADING - 1            ].Value <<= aItem.bNoExtLeading;
        lPropertyValues[ OFFSET_USELINESPACING - 1          ].Value <<= aItem.bUseLineSpacing;
        lPropertyValues[ OFFSET_ADDTABLESPACING - 1         ].Value <<= aItem.bAddTableSpacing;
        lPropertyValues[ OFFSET_USEOBJPOS - 1               ].Value <<= aItem.bUseObjPos;
        lPropertyValues[ OFFSET_USEOURTEXTWRAPPING - 1      ].Value <<= aItem.bUseOurTextWrapping;
        lPropertyValues[ OFFSET_CONSIDERWRAPPINGSTYLE - 1   ].Value <<= aItem.bConsiderWrappingStyle;
        lPropertyValues[ OFFSET_EXPANDWORDSPACE - 1         ].Value <<= aItem.bExpandWordSpace;

        SetSetProperties( SETNODE_ALLFILEFORMATS, lPropertyValues );
    }
}

//*****************************************************************************************************************
//  public method
//*****************************************************************************************************************
void SvtCompatibilityOptions_Impl::Clear()
{
    m_aOptions.Clear();
    SetModified();
}

//*****************************************************************************************************************
//  public method
//*****************************************************************************************************************
Sequence< Sequence< PropertyValue > > SvtCompatibilityOptions_Impl::GetList() const
{
    Sequence< Sequence< PropertyValue > > lReturn;
    lReturn = m_aOptions.GetList();
    return lReturn;
}

//*****************************************************************************************************************
//  public method
//*****************************************************************************************************************

void SvtCompatibilityOptions_Impl::AppendItem(  const OUString& _sName,
                                                const OUString& _sModule,
                                                bool _bUsePrtMetrics,
                                                bool _bAddSpacing,
                                                bool _bAddSpacingAtPages,
                                                bool _bUseOurTabStops,
                                                bool _bNoExtLeading,
                                                bool _bUseLineSpacing,
                                                bool _bAddTableSpacing,
                                                bool _bUseObjPos,
                                                bool _bUseOurTextWrapping,
                                                bool _bConsiderWrappingStyle,
                                                bool _bExpandWordSpace )
{
    SvtCompatibilityEntry aItem( _sName, _sModule );
    aItem.SetUsePrtMetrics( _bUsePrtMetrics );
    aItem.SetAddSpacing( _bAddSpacing );
    aItem.SetAddSpacingAtPages( _bAddSpacingAtPages );
    aItem.SetUseOurTabStops( _bUseOurTabStops );
    aItem.SetNoExtLeading( _bNoExtLeading );
    aItem.SetUseLineSpacing( _bUseLineSpacing );
    aItem.SetAddTableSpacing( _bAddTableSpacing );
    aItem.SetUseObjPos( _bUseObjPos );
    aItem.SetUseOurTextWrapping( _bUseOurTextWrapping );
    aItem.SetConsiderWrappingStyle( _bConsiderWrappingStyle );
    aItem.SetExpandWordSpace( _bExpandWordSpace );
    m_aOptions.AppendEntry( aItem );

    // default item reset?
    if ( _sName.equals( COMPATIBILITY_DEFAULT_NAME ) != sal_False )
        m_aDefOptions = aItem;

    SetModified();
}

//*****************************************************************************************************************
//  private method
//*****************************************************************************************************************
Sequence< OUString > SvtCompatibilityOptions_Impl::impl_GetPropertyNames( Sequence< OUString >& rItems )
{
    // First get ALL names of current existing list items in configuration!
    rItems = GetNodeNames( SETNODE_ALLFILEFORMATS );
    // expand list to result list ...
    Sequence< OUString > lProperties( rItems.getLength() * ( PROPERTYCOUNT - 1 ) );
    impl_ExpandPropertyNames( rItems, lProperties );
    // Return result.
    return lProperties;
}

//*****************************************************************************************************************
//  private method
//*****************************************************************************************************************
void SvtCompatibilityOptions_Impl::impl_ExpandPropertyNames(
    const Sequence< OUString >& lSource, Sequence< OUString >& lDestination )
{
    OUString sFixPath;
    sal_Int32 nDestStep = 0;
    sal_Int32 nSourceCount = lSource.getLength();
    // Copy entries to destination and expand every item with 2 supported sub properties.
    for( sal_Int32 nSourceStep = 0; nSourceStep < nSourceCount; ++nSourceStep )
    {
        sFixPath = SETNODE_ALLFILEFORMATS;
        sFixPath += PATHDELIMITER;
        sFixPath += lSource[ nSourceStep ];
        sFixPath += PATHDELIMITER;

        lDestination[nDestStep] = sFixPath;
        lDestination[nDestStep] += PROPERTYNAME_MODULE;
        ++nDestStep;
        lDestination[nDestStep] = sFixPath;
        lDestination[nDestStep] += PROPERTYNAME_USEPRTMETRICS;
        ++nDestStep;
        lDestination[nDestStep] = sFixPath;
        lDestination[nDestStep] += PROPERTYNAME_ADDSPACING;
        ++nDestStep;
        lDestination[nDestStep] = sFixPath;
        lDestination[nDestStep] += PROPERTYNAME_ADDSPACINGATPAGES;
        ++nDestStep;
        lDestination[nDestStep] = sFixPath;
        lDestination[nDestStep] += PROPERTYNAME_USEOURTABSTOPS;
        ++nDestStep;
        lDestination[nDestStep] = sFixPath;
        lDestination[nDestStep] += PROPERTYNAME_NOEXTLEADING;
        ++nDestStep;
        lDestination[nDestStep] = sFixPath;
        lDestination[nDestStep] += PROPERTYNAME_USELINESPACING;
        ++nDestStep;
        lDestination[nDestStep] = sFixPath;
        lDestination[nDestStep] += PROPERTYNAME_ADDTABLESPACING;
        ++nDestStep;
        lDestination[nDestStep] = sFixPath;
        lDestination[nDestStep] += PROPERTYNAME_USEOBJPOS;
        ++nDestStep;
        lDestination[nDestStep] = sFixPath;
        lDestination[nDestStep] += PROPERTYNAME_USEOURTEXTWRAP;
        ++nDestStep;
        lDestination[nDestStep] = sFixPath;
        lDestination[nDestStep] += PROPERTYNAME_CONSIDERWRAPSTYLE;
        ++nDestStep;
        lDestination[nDestStep] = sFixPath;
        lDestination[nDestStep] += PROPERTYNAME_EXPANDWORDSPACE;
        ++nDestStep;
    }
}

//*****************************************************************************************************************
//  initialize static member
//  DON'T DO IT IN YOUR HEADER!
//  see definition for further information
//*****************************************************************************************************************
SvtCompatibilityOptions_Impl*   SvtCompatibilityOptions::m_pDataContainer = NULL;
sal_Int32                       SvtCompatibilityOptions::m_nRefCount = 0;

//*****************************************************************************************************************
//  constructor
//*****************************************************************************************************************
SvtCompatibilityOptions::SvtCompatibilityOptions()
{
    // Global access, must be guarded (multithreading!).
    MutexGuard aGuard( GetOwnStaticMutex() );
    // Increase ouer refcount ...
    ++m_nRefCount;
    // ... and initialize ouer data container only if it not already exist!
    if( m_pDataContainer == NULL )
    {
        m_pDataContainer = new SvtCompatibilityOptions_Impl;
        ItemHolder1::holdConfigItem(E_COMPATIBILITY);
    }
}

//*****************************************************************************************************************
//  destructor
//*****************************************************************************************************************
SvtCompatibilityOptions::~SvtCompatibilityOptions()
{
    // Global access, must be guarded (multithreading!)
    MutexGuard aGuard( GetOwnStaticMutex() );
    // Decrease ouer refcount.
    --m_nRefCount;
    // If last instance was deleted ...
    // we must destroy ouer static data container!
    if( m_nRefCount <= 0 )
    {
        delete m_pDataContainer;
        m_pDataContainer = NULL;
    }
}

//*****************************************************************************************************************
//  public method
//*****************************************************************************************************************
void SvtCompatibilityOptions::Clear()
{
    MutexGuard aGuard( GetOwnStaticMutex() );
    m_pDataContainer->Clear();
}

void SvtCompatibilityOptions::SetDefault( OUString sName, bool bValue )
{
    m_pDataContainer->SetDefault( sName, bValue );
}

//*****************************************************************************************************************
//  public method
//*****************************************************************************************************************
void SvtCompatibilityOptions::AppendItem( const OUString& sName,
                                          const OUString& sModule,
                                          bool bUsePrtMetrics,
                                          bool bAddSpacing,
                                          bool bAddSpacingAtPages,
                                          bool bUseOurTabStops,
                                          bool bNoExtLeading,
                                          bool bUseLineSpacing,
                                          bool bAddTableSpacing,
                                          bool bUseObjPos,
                                          bool bUseOurTextWrapping,
                                          bool bConsiderWrappingStyle,
                                          bool bExpandWordSpace )
{
    MutexGuard aGuard( GetOwnStaticMutex() );
    m_pDataContainer->AppendItem(
        sName, sModule, bUsePrtMetrics, bAddSpacing,
        bAddSpacingAtPages, bUseOurTabStops, bNoExtLeading,
        bUseLineSpacing, bAddTableSpacing, bUseObjPos,
        bUseOurTextWrapping, bConsiderWrappingStyle, bExpandWordSpace );
}

bool SvtCompatibilityOptions::IsUsePrtDevice() const
{
    MutexGuard aGuard( GetOwnStaticMutex() );
    return m_pDataContainer->IsUsePrtDevice();
}

bool SvtCompatibilityOptions::IsAddSpacing() const
{
    MutexGuard aGuard( GetOwnStaticMutex() );
    return m_pDataContainer->IsAddSpacing();
}

bool SvtCompatibilityOptions::IsAddSpacingAtPages() const
{
    MutexGuard aGuard( GetOwnStaticMutex() );
    return m_pDataContainer->IsAddSpacingAtPages();
}

bool SvtCompatibilityOptions::IsUseOurTabStops() const
{
    MutexGuard aGuard( GetOwnStaticMutex() );
    return m_pDataContainer->IsUseOurTabStops();
}

bool SvtCompatibilityOptions::IsNoExtLeading() const
{
    MutexGuard aGuard( GetOwnStaticMutex() );
    return m_pDataContainer->IsNoExtLeading();
}

bool SvtCompatibilityOptions::IsUseLineSpacing() const
{
    MutexGuard aGuard( GetOwnStaticMutex() );
    return m_pDataContainer->IsUseLineSpacing();
}

bool SvtCompatibilityOptions::IsAddTableSpacing() const
{
    MutexGuard aGuard( GetOwnStaticMutex() );
    return m_pDataContainer->IsAddTableSpacing();
}

bool SvtCompatibilityOptions::IsUseObjectPositioning() const
{
    MutexGuard aGuard( GetOwnStaticMutex() );
    return m_pDataContainer->IsUseObjPos();
}

bool SvtCompatibilityOptions::IsUseOurTextWrapping() const
{
    MutexGuard aGuard( GetOwnStaticMutex() );
    return m_pDataContainer->IsUseOurTextWrapping();
}

bool SvtCompatibilityOptions::IsConsiderWrappingStyle() const
{
    MutexGuard aGuard( GetOwnStaticMutex() );
    return m_pDataContainer->IsConsiderWrappingStyle();
}

bool SvtCompatibilityOptions::IsExpandWordSpace() const
{
    MutexGuard aGuard( GetOwnStaticMutex() );
    return m_pDataContainer->IsExpandWordSpace();
}

Sequence< Sequence< PropertyValue > > SvtCompatibilityOptions::GetList() const
{
    MutexGuard aGuard( GetOwnStaticMutex() );
    return m_pDataContainer->GetList();
}

namespace
{
    class theCompatibilityOptionsMutex : public rtl::Static<osl::Mutex, theCompatibilityOptionsMutex>{};
}

//*****************************************************************************************************************
//  private method
//*****************************************************************************************************************
Mutex& SvtCompatibilityOptions::GetOwnStaticMutex()
{
    return theCompatibilityOptionsMutex::get();
}

/* vim:set shiftwidth=4 softtabstop=4 expandtab: */