diff options
| -rw-r--r-- | ChangeLog | 138 | ||||
| -rw-r--r-- | NEWS | 307 | ||||
| -rw-r--r-- | RELEASE | 2 | ||||
| -rw-r--r-- | configure.ac | 12 | ||||
| -rw-r--r-- | gstreamer-vaapi.doap | 10 | ||||
| -rw-r--r-- | meson.build | 2 |
6 files changed, 367 insertions, 104 deletions
@@ -1,3 +1,141 @@ +=== release 1.15.2 === + +2019-02-26 12:01:53 +0000 Tim-Philipp Müller <tim@centricular.com> + + * ChangeLog: + * NEWS: + * RELEASE: + * configure.ac: + * gstreamer-vaapi.doap: + * meson.build: + Release 1.15.2 + +2019-02-26 12:01:53 +0000 Tim-Philipp Müller <tim@centricular.com> + + * docs/plugins/inspect/plugin-vaapi.xml: + Update docs + +2019-02-05 16:59:40 +0800 He Junyan <junyan.he@hotmail.com> + + * gst/vaapi/gstvaapivideomemory.c: + vaapivideomemory: Prefer same format for surface and image + We prefer to use the same format between image and surface for gst + vaapi allocator. The old way may choose different formats between + image and surface. For example, the RGBA image may have a NV12 surface. + So we need to do format conversion when we put/get image to surface. + Some drivers such as iHD can not support such conversion and always + cause a data flow error. There may also have some performance cost + for format conversion when put/get images. + So we prefer to use the same format for image and surface in the + allocator. If the surface can not support that format, we then + fallback to find a best one as the surface format. + Co-authored-by: Víctor Jáquez <vjaquez@igalia.com> + +2019-02-15 15:19:51 +0800 He Junyan <junyan.he@hotmail.com> + + * gst-libs/gst/vaapi/video-format.c: + libs: Delete the duplicated ARGB video format. + Two ARGB formats with the same format information. + Should be verbose and delete one. + Signed-off-by: He Junyan <junyan.he@hotmail.com> + +2019-02-13 10:39:59 -0500 Adam Jackson <ajax@redhat.com> + + * common: + * gst-libs/gst/vaapi/gstvaapiutils_glx.c: + glx: Stop specifying GLX_DEPTH_SIZE + This code is just confused. It's asking for at least as many bits of + (z-axis) depth as the root window has bits of (color) depth. For rgb565 + or rgb888 this is harmless, but at 10 bits per channel this demands a + 30-bit or deeper Z buffer. While some hardware could in principle do a + 32-bit Z buffer, Mesa does not expose such fbconfigs (at least on Intel + and AMD). + We're not actually using the Z buffer, so just stop asking for one. + +2019-01-14 11:30:48 +0100 Niels De Graef <niels.degraef@barco.com> + + * configure.ac: + * gst-libs/gst/vaapi/Makefile.am: + * gst-libs/gst/vaapi/gstvaapidisplay_wayland.c: + * gst-libs/gst/vaapi/gstvaapidisplay_wayland_priv.h: + * gst-libs/gst/vaapi/gstvaapiwindow_wayland.c: + * gst-libs/gst/vaapi/meson.build: + * gst/vaapi/gstvaapisink.c: + * meson.build: + libs: wayland: add support for XDG-shell protocol + [wl_shell] is officially [deprecated], so provide support for the + XDG-shell protocol should be provided by all desktop-like compositors. + (In case they don't, we can of course fall back to wl_shell). + Note that the XML file is directly provided by the `wayland-protocols` + dependency and generates the protocol marshalling code. + [wl_shell]: https://people.freedesktop.org/~whot/wayland-doxygen/wayland/Client/group__iface__wl__shell.html + [deprecated]: https://github.com/wayland-project/wayland/commit/698dde195837f3d0844b2725ba4ea8ce9ee7518c + +2019-02-16 19:09:50 +0100 Niels De Graef <nielsdegraef@gmail.com> + + * gst-libs/gst/vaapi/gstvaapiwindow_wayland.c: + libs: window: wayland: Prefix wl_shell_surface field with `wl_` + It will help us to distinguish from other Wayland shell surface + (such as XDG-shell) later on. + +2019-01-14 09:58:19 +0100 Niels De Graef <nielsdegraef@gmail.com> + + * gst-libs/gst/vaapi/gstvaapidisplay_wayland.c: + * gst-libs/gst/vaapi/gstvaapidisplay_wayland_priv.h: + * gst-libs/gst/vaapi/gstvaapiwindow_wayland.c: + libs: wayland: Prefix wl_shell field with `wl_` + It will help us to distinguish from other Wayland shells (such as + XDG-shell) later on. + +2019-02-08 09:21:28 +0300 Denis Nagorny <denis.nagorny@intel.com> + + * gst-libs/gst/vaapi/gstvaapidisplay.c: + libs: display: lock ensure_profile() + Thread safety patch for ensure_profile() function + Fixes #133 + +2019-02-08 16:35:39 +0100 Víctor Manuel Jáquez Leal <vjaquez@igalia.com> + + * meson.build: + meson: bump the minimum wayland version requirement to 1.11.0 + This was missed on commit 77bb3424 + +2019-01-24 21:08:07 +0100 Víctor Manuel Jáquez Leal <vjaquez@igalia.com> + + * gst-libs/gst/vaapi/gstvaapiwindow_x11.c: + * gst/vaapi/gstvaapisink.c: + vaapisink: x11: trap WM_DELETE_WINDOW message + Register the WM_DELETE_WINDOW message from window manager and + trap it to stop the pipeline cleanly. + Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer-vaapi/issues/130 + +2019-01-21 19:22:58 +0100 Víctor Manuel Jáquez Leal <vjaquez@igalia.com> + + * gst-libs/gst/vaapi/gstvaapiwindow.c: + libs: window: remove native-id property + native-id property is problematic since the variable that stores it is + gsize, which is platform specific, and in some is bigger than unsigned + long, and there are not way to handle gsize properties. + Also, GST_VAAPI_ID_INVALID is defined in gsize terms, and we would + like to keep using it for this scope. + This patch removes the native-id property and set it manually in + gst_vaapi_window_new_internal(). + +2019-01-18 10:33:37 +0100 Víctor Manuel Jáquez Leal <vjaquez@igalia.com> + + * gst-libs/gst/vaapi/gstvaapiwindow.c: + libs: window: use G_GSIZE_MODIFIER for window id + gsize type is not equal in all platforms, then the 'l' print modifier + shall not be used always. + This issue was found in Debian builds. + +2019-01-17 10:27:13 +0800 Wangfei <fei.w.wang@intel.com> + + * gst-libs/gst/vaapi/gstvaapiencoder_h264.c: + * gst-libs/gst/vaapi/gstvaapiencoder_h265.c: + encoder: h264/h265: set SPS cbr_flag with correct value. + The flag only set as 1 when the rate-control mode is CBR. + === release 1.15.1 === 2019-01-17 02:36:52 +0000 Tim-Philipp Müller <tim@centricular.com> @@ -15,7 +15,7 @@ the git master branch and which will eventually result in 1.16. See https://gstreamer.freedesktop.org/releases/1.16/ for the latest version of this document. -_Last updated: Monday 14 January 2019, 13:00 UTC (log)_ +_Last updated: Monday 25 January 2019, 15:00 UTC (log)_ Introduction @@ -24,8 +24,8 @@ The GStreamer team is proud to announce a new major feature release in the stable 1.x API series of your favourite cross-platform multimedia framework! -As always, this release is again packed with new features, bug fixes and -other improvements. +As always, this release is again packed with many new features, bug +fixes and other improvements. Highlights @@ -40,7 +40,7 @@ Highlights - Support for Closed Captions and other Ancillary Data in video -- Spport for planar (non-interleaved) raw audio +- Support for planar (non-interleaved) raw audio - GstVideoAggregator, compositor and OpenGL mixer elements are now in -base @@ -98,14 +98,17 @@ Noteworthy new API to process the media in a live pipeline before it reaches the sink. This is on top of the systemic latency that is normally reported by the latency query. This defaults to 20ms and should make pipelines - such as “v4lsrc ! xvimagesink” not claim that all frames are late in - the QoS events. Ideally, this should replace max_lateness for most - applications. + such as v4l2src ! xvimagesink not claim that all frames are late in + the QoS events. Ideally, this should replace the "max-lateness" + property for most applications. - RTCP Extended Reports (XR) parsing according to RFC 3611: Loss/Duplicate RLE, Packet Receipt Times, Receiver Reference Time, Delay since the last Receiver (DLRR), Statistics Summary, and VoIP - Metrics reports. + Metrics reports. This only provides the ability to parse such + packets, generation of XR packets is not supported yet and XR + packets are not automatically parsed by rtpbin / rtpsession but must + be actively handled by the application. - a new mode for interlaced video was added where each buffer carries a single field of interlaced video, with buffer flags indicating @@ -146,9 +149,10 @@ or planar arrangement in memory would look like |LEFT|LEFT|LEFT| and |RIGHT|RIGHT|RIGHT| residing in separate memory chunks or separated by some padding. -GStreamer has always had signalling for non-interleaved audio, but it -was never actually properly implemented in any elements. audioconvert -would advertise support for it, but wasn’t actually able to handle it. +GStreamer has always had signalling for non-interleaved audio since +version 1.0, but it was never actually properly implemented in any +elements. audioconvert would advertise support for it, but wasn’t +actually able to handle it correctly. With this release we now have full support for non-interleaved audio as well, which means more efficient integration with external APIs that @@ -177,18 +181,18 @@ The video support library has gained support for detecting and extracting Ancillary Data from videos as per the SMPTE S291M specification, including: -- a VBI (Video Blanking Interval) parser that can detect and extract - Ancillary Data from Vertical Blanking Interval lines of component - signals. This is currently supported for videos in v210 and UYVY - format. +- a VBI (Vertical Blanking Interval) parser that can detect and + extract Ancillary Data from Vertical Blanking Interval lines of + component signals. This is currently supported for videos in v210 + and UYVY format. - a new GstMeta for closed captions: GstVideoCaptionMeta. This supports the two types of closed captions, CEA-608 and CEA-708, along with the four different ways they can be transported (other systems are a superset of those). -- a VBI (Video Blanking Interval) encoder for writing ancillary data - to the Vertical Blanking Interval lines of component signals. +- a VBI (Vertical Blanking Interval) encoder for writing ancillary + data to the Vertical Blanking Interval lines of component signals. The new closedcaption plugin in gst-plugins-bad then makes use of all this new infrastructure and provides the following elements: @@ -222,6 +226,9 @@ support: - playbin and playbin3 learned how to autoplug CEA 608/708 CC overlay elements +- the externally maintained ajavideosrc element for AJA capture cards + has support for extracting closed captions + The rsclosedcaption plugin in the Rust plugins collection includes a MacCaption (MCC) file parser and encoder. @@ -239,7 +246,7 @@ New Elements - gloverlaycompositor: New OpenGL-based compositor element that flattens any overlays from GstVideoOverlayCompositionMetas into the - video stream. + video stream. This element is also always part of glimagesink. - glalpha: New element that adds an alpha channel to a video stream. The values of the alpha channel can either be set to a constant or @@ -248,7 +255,7 @@ New Elements done in floating point so results may not be identical to the output of the existing alpha element. -- rtpfunnel funnels together rtp-streams into a single session. Use +- rtpfunnel funnels together RTP streams into a single session. Use cases include multiplexing and bundle. webrtcbin uses it to implement BUNDLE support. @@ -264,10 +271,12 @@ New Elements WPE - Two new OpenCV-based elements: cameracalibrate and cameraundistort - who can communicate to figure out distortion correction parameters + that can communicate to figure out distortion correction parameters for a camera and correct for the distortion. -- new sctp plugin based on usrsctp with sctpenc and sctpdec elements +- New sctp plugin based on usrsctp with sctpenc and sctpdec elements. + These elements are used inside webrtcbin for implementing data + channels. New element features and additions @@ -348,12 +357,12 @@ New element features and additions - rtspsrc now allows applications to send RTSP SET_PARAMETER and GET_PARAMETER requests using action signals. -- rtspsrc also has a small (100ms) configurable teardown delay by - default to try and make sure an RTSP TEARDOWN request gets sent out - when the source element shuts down. This will block the downward - PAUSED to READY state change for a short time, but can be unset - where it’s a problem. Some servers only allow a limited number of - concurren clients, so if no proper TEARDOWN is sent clients may have +- rtspsrc has a small (100ms) configurable teardown delay by default + to try and make sure an RTSP TEARDOWN request gets sent out when the + source element shuts down. This will block the downward PAUSED to + READY state change for a short time, but can be disabled where it’s + a problem. Some servers only allow a limited number of concurrent + clients, so if no proper TEARDOWN is sent new clients may have problems connecting to the server for a while. - souphttpsrc behaves better with low bitrate streams now. Before it @@ -364,6 +373,7 @@ New element features and additions - filesink: do internal buffering to avoid performance regression with small writes since we bypass libc buffering by using writev() + instead of fwrite() - identity: add "eos-after" property and fix "error-after" property when the element is reused @@ -405,9 +415,9 @@ New element features and additions relays (TURN servers). - The removesilence element has received various new features and - properties, such as a - "threshold"1 property, detecting silence only after minimum silence time/buffers, a“silent”property to control bus message notifications as well as a“squash”` - property. + properties, such as a "threshold" property, detecting silence only + after minimum silence time/buffers, a "silent" property to control + bus message notifications as well as a "squash" property. - AOMedia AV1 decoder gained support for 10/12bit decoding whilst the AV1 encoder supports more image formats and subsamplings now and @@ -430,15 +440,15 @@ Plugin and library moves - The stereo element was moved from -bad into the existing audiofx plugin in -good. If you get duplicate type registration warnings - when upgrading, check that you don’t have a stale gststereo plugin - lying about somewhere. + when upgrading, check that you don’t have a stale stereoplugin lying + about somewhere. GstVideoAggregator, compositor, and OpenGL mixer elements moved from -bad to -base GstVideoAggregator is a new base class for raw video mixers and muxers -and is based on [GstAggregator][aggregator]. It provides defined-latency -mixing of raw video inputs and ensures that the pipeline won’t stall -even if one of the input streams stops producing data. +and is based on GstAggregator. It provides defined-latency mixing of raw +video inputs and ensures that the pipeline won’t stall even if one of +the input streams stops producing data. As part of the move to stabilise the API there were some last-minute API changes and clean-ups, but those should mostly affect internal elements. @@ -456,14 +466,15 @@ would expected in most scenarios. The compositor element has gained support for per-pad blending mode operators (SOURCE, OVER, ADD) which determines what operator to use for blending this pad over the previous ones. This can be used to implement -crossfading. +crossfading and the available operators can be extended in the future as +needed. A number of OpenGL-based video mixer elements (glvideomixer, glmixerbin, glvideomixerelement, glstereomix, glmosaic) which are built on top of GstVideoAggregator have also been moved from -bad to -base now. These elements have been merged into the existing OpenGL plugin, so if you get duplicate type registration warnings when upgrading, check that you -don’t have a stale gstopenglmixers plugin lying about somewhere. +don’t have a stale openglmixers plugin lying about somewhere. Plugin removals @@ -477,11 +488,11 @@ The following plugins have been removed from gst-plugins-bad: plugin. - The acmmp3dec and acmenc plugins for Windows have been removed. ACM - is an ancient legacy API and there was no point in keeping them - around for a licensed mp3 decoder now that mp3 patents have expired - and we have a decoder in -good. We also didn’t ship these in our - cerbero-built Windows packages, so it’s unlikely that they’ll be - missed. + is an ancient legacy API and there was no point in keeping the + plugins around for a licensed MP3 decoder now that the MP3 patents + have expired and we have a decoder in -good. We also didn’t ship + these in our cerbero-built Windows packages, so it’s unlikely that + they’ll be missed. Miscellaneous API additions @@ -506,7 +517,8 @@ Miscellaneous API additions one might need to put such elements into READY state to test if the hardware is present in the system for example. -- protection: Add a new definition for unspecified system protection +- protection: Add a new definition for unspecified system protection, + GST_PROTECTION_UNSPECIFIED_SYSTEM_ID - take functions for various mini objects that didn’t have them yet: gst_query_take(), gst_message_take(), gst_tag_list_take(), @@ -522,11 +534,18 @@ Miscellaneous API additions gst_clear_mini_object(), gst_clear_object() - miniobject: new API gst_mini_object_add_parent() and - gst_mini_object_remove_parent()to set parent pointers on mini objects to ensure correct writability: Every container of miniobjects now needs to store itself as parent in the child object, and remove itself again later. A mini object is then only writable if there is at most one parent, that parent is writable itself, and the reference count of the mini object is 1.GstBuffer(for memories),GstBufferList(for buffers),GstSample(for caps, buffer, bufferlist), andGstVideoOverlayComposition` - were updated accordingly. Without this it was possible to have - e.g. a buffer list with a refcount of 2 used in two places at once - that both modify the same buffer with refcount 1 at the same time - wrongly thinking it is writable even though it’s really not. + gst_mini_object_remove_parent() to set parent pointers on mini + objects to ensure correct writability: Every container of + miniobjects now needs to store itself as parent in the child object, + and remove itself again later. A mini object is then only writable + if there is at most one parent, that parent is writable itself, and + the reference count of the mini object is 1. GstBuffer (for + memories), GstBufferList (for buffers), GstSample (for caps, buffer, + bufferlist), and GstVideoOverlayComposition were updated + accordingly. Without this it was possible to have e.g. a buffer list + with a refcount of 2 used in two places at once that both modify the + same buffer with refcount 1 at the same time wrongly thinking it is + writable even though it’s really not. - poll: add API to watch for POLLPRI and stop treating POLLPRI as a read. This is useful to wait for video4linux events which are @@ -596,7 +615,7 @@ GstPlayer Miscellaneous changes -- As a result of moving to different FFmpeg APIs, encoder and decoder +- As a result of moving to newer FFmpeg APIs, encoder and decoder elements exposed by the GStreamer FFmpeg wrapper plugin (gst-libav) may have seen possibly incompatible changes to property names and/or types, and not all properties exposed might be functional. We are @@ -649,48 +668,48 @@ Tracing framework and debugging improvements object. This is currently limited to pads for GstElements and events for the pads. The output may look like this: - (gdb) gst-print pad.object.parent - GstMatroskaDemux (matroskademux0) { - SinkPad (sink, pull) { - } - SrcPad (video_0, push) { - events: - stream-start: - stream-id: 0463ccb080d00b8689bf569a435c4ff84f9ff753545318ae2328ea0763fd0bec/001:1274058367 - caps: video/x-theora - width: 1920 - height: 800 - pixel-aspect-ratio: 1/1 - framerate: 24/1 - streamheader: < 0x5555557c7d30 [GstBuffer], 0x5555557c7e40 [GstBuffer], 0x7fffe00141d0 [GstBuffer] > - segment: time - rate: 1 - tag: global - container-format: Matroska - } - SrcPad (audio_0, push) { - events: - stream-start: - stream-id: 0463ccb080d00b8689bf569a435c4ff84f9ff753545318ae2328ea0763fd0bec/002:1551204875 - caps: audio/mpeg - mpegversion: 4 - framed: true - stream-format: raw - codec_data: 0x7fffe0014500 [GstBuffer] - level: 2 - base-profile: lc - profile: lc - channels: 2 - rate: 44100 - segment: time - rate: 1 - tag: global - container-format: Matroska - tag: stream - audio-codec: MPEG-4 AAC audio - language-code: en + (gdb) gst-print pad.object.parent + GstMatroskaDemux (matroskademux0) { + SinkPad (sink, pull) { + } + SrcPad (video_0, push) { + events: + stream-start: + stream-id: 0463ccb080d00b8689bf569a435c4ff84f9ff753545318ae2328ea0763fd0bec/001:1274058367 + caps: video/x-theora + width: 1920 + height: 800 + pixel-aspect-ratio: 1/1 + framerate: 24/1 + streamheader: < 0x5555557c7d30 [GstBuffer], 0x5555557c7e40 [GstBuffer], 0x7fffe00141d0 [GstBuffer] > + segment: time + rate: 1 + tag: global + container-format: Matroska + } + SrcPad (audio_0, push) { + events: + stream-start: + stream-id: 0463ccb080d00b8689bf569a435c4ff84f9ff753545318ae2328ea0763fd0bec/002:1551204875 + caps: audio/mpeg + mpegversion: 4 + framed: true + stream-format: raw + codec_data: 0x7fffe0014500 [GstBuffer] + level: 2 + base-profile: lc + profile: lc + channels: 2 + rate: 44100 + segment: time + rate: 1 + tag: global + container-format: Matroska + tag: stream + audio-codec: MPEG-4 AAC audio + language-code: en + } } - } - gst_structure_to_string() now serialises the actual value of pointers when serialising GstStructures instead of claiming they’re @@ -704,10 +723,10 @@ Tools - gst-inspect-1.0 has coloured output now and will automatically use a pager if the output does not fit on a page. This only works in a - unix environment and if the output is not piped. If you don’t like - the colours you can disable them by setting the - GST_INSPECT_NO_COLORS=1 environment variable or passing the - --no-colors command line option. + UNIX environment and if the output is not piped, and on Windows 10 + build 16257 or newer. If you don’t like the colours you can disable + them by setting the GST_INSPECT_NO_COLORS=1 environment variable or + passing the --no-color command line option. GStreamer RTSP server @@ -736,6 +755,29 @@ GStreamer VAAPI - this section will be filled in in due course +GStreamer OMX + +- Add support of NV16 format to video encoders input. + +- Video decoders now handle the ALLOCATION query to tell upstream + about the number of buffers they require. Video encoders will also + use this query to adjust their number of allocated buffers + preventing starvation when using dynamic buffer mode. + +- The OMX_PERFORMANCE debug category has been renamed to OMX_API_TRACE + and can now be used to track a widder variety of interactions + between OMX and GStreamer. + +- Video encoders will now detect frame rate only changes and will + inform OMX about it rather than doing a full format reset. + +- Various Zynq UltraScale+ specific improvements: + - Video encoders are now able to import dmabuf from upstream. + - Support for HEVC range extension profiles and more AVC profiles. + - We can now request video encoders to generate an IDR using the + force key unit event. + + GStreamer Editing Services and NLE - this section will be filled in in due course @@ -858,7 +900,7 @@ Added value per tag. The old ::iter_tag_list() function was renamed to ::iter_generic() and still provides access to each value for a tag - Bus::iter() and Bus::iter_timed() iterators around the corresponding - ::pop*() functions + ::pop\*() functions - serde serialization of Value can also handle Buffer now @@ -995,11 +1037,78 @@ Build and Dependencies - New sctp plugin based on usrsctp (for WebRTC data channels) +Cerbero + +Cerbero is a meta build system used to build GStreamer plus dependencies +on platforms where dependencies are not readily available, such as +Windows, Android, iOS and macOS. + +Cerbero has seen a number of improvements: + +- Cerbero has been ported to Python 3 and requires Python 3.5 or newer + now + +- Source tarballs are now protected by checksums in the recipes to + guard against download errors and malicious takeover of projects or + websites. In addition, downloads are only allowed via secure + transports now and plain HTTP, FTP and git:// transports are not + allowed anymore. + +- There is now a new fetch-bootstrap command which downloads sources + required for bootstrapping, with an optional --build-tools-only + argument to match the bootstrap --build-tools-only command. + +- The bootstrap, build, package and bundle-source commands gained a + new --offline switch that ensures that only sources from the cache + are used and never downloaded via the network. This is useful in + combination with the fetch and fetch-bootstrap commands that acquire + sources ahead of time before any build steps are executed. This + allows more control over the sources used and when sources are + updated, and is particularly useful for build environments that + don’t have network access. + +- bootstrap --assume-yes will automatically say ‘yes’ to any + interactive prompts during the bootstrap stage, such as those from + apt-get or yum. + +- bootstrap --system-only will only bootstrap the system without build + tools. + +- Manifest support: The build manifest can be used in continuous + integration (CI) systems to fixate the Git revision of certain + projects so that all builds of a pipeline are on the same reference. + This is used in GStreamer’s gitlab CI for example. It can also be + used in order to re-produce a specific build. To set a manifest, you + can set manifest = 'my_manifest.xml' in your configuration file, or + use the --manifest command line option. The command line option will + take precendence over anything specific in the configuration file. + +- The new build-deps command can be used to build only the + dependencies of a recipe, without the recipe itself. + +- new --list-variants command to list available variants + +- variants can now be set on the command line via the -v option as a + comma-separated list. This overrides any variants set in any + configuration files. + +- new qt5, intelmsdk and nvidia variants for enabling Qt5 and hardware + codec support. See the Enabling Optional Features with Variants + section in the Cerbero documentation for more details how to enable + and use these variants. + +- A new -t / --timestamp command line switch makes commands print + timestamps + Platform-specific changes and improvements Android +- toolchain: update compiler to clang and NDKr18. NDK r18 removed the + armv5 target and only has Android platforms that target at least + armv7 so the armv5 target is not useful anymore. + - The way that GIO modules are named has changed due to upstream GLib natively adding support for loading static GIO modules. This means that any GStreamer application using gnutls for SSL/TLS on the @@ -1010,9 +1119,15 @@ Android library. Look at this commit for the necessary change in the examples. +- various build issues on Android have been fixed. + macOS and iOS -- macOS binaries should be fully relocatable now +- various build issues on iOS have been fixed. + +- the minimum required iOS version is now 9.0. The difference in + adoption between 8.0 and 9.0 is 0.1% and the bump to 9.0 fixes some + build issues. - The way that GIO modules are named has changed due to upstream GLib natively adding support for loading static GIO modules. This means @@ -1,4 +1,4 @@ -This is GStreamer gstreamer-vaapi 1.15.1. +This is GStreamer gstreamer-vaapi 1.15.2. GStreamer 1.15 is the development branch leading up to the next major stable version which will be 1.16. diff --git a/configure.ac b/configure.ac index cf382d7c..056ebfee 100644 --- a/configure.ac +++ b/configure.ac @@ -1,7 +1,7 @@ # gstreamer-vaapi package version number m4_define([gst_vaapi_major_version], [1]) m4_define([gst_vaapi_minor_version], [15]) -m4_define([gst_vaapi_micro_version], [1]) +m4_define([gst_vaapi_micro_version], [2]) m4_define([gst_vaapi_nano_version], [0]) m4_define([gst_vaapi_version], [gst_vaapi_major_version.gst_vaapi_minor_version.gst_vaapi_micro_version]) @@ -16,17 +16,17 @@ dnl - interfaces added/removed/changed -> increment CURRENT, REVISION = 0 dnl - interfaces added -> increment AGE dnl - interfaces removed -> AGE = 0 # gstreamer-vaapi library (libtool) version number -m4_define([gst_vaapi_lt_current], [1501]) +m4_define([gst_vaapi_lt_current], [1502]) m4_define([gst_vaapi_lt_revision], [0]) -m4_define([gst_vaapi_lt_age], [1501]) +m4_define([gst_vaapi_lt_age], [1502]) # glib version number m4_define([glib_version], [2.40]) # gstreamer version number -m4_define([gst_version], [1.15.1]) -m4_define([gst_plugins_base_version], [1.15.1]) -m4_define([gst_plugins_bad_version], [1.15.1]) +m4_define([gst_version], [1.15.2]) +m4_define([gst_plugins_base_version], [1.15.2]) +m4_define([gst_plugins_bad_version], [1.15.2]) # Wayland minimum version number m4_define([wayland_api_version], [1.11.0]) diff --git a/gstreamer-vaapi.doap b/gstreamer-vaapi.doap index e77be06d..8477c7df 100644 --- a/gstreamer-vaapi.doap +++ b/gstreamer-vaapi.doap @@ -27,6 +27,16 @@ <release> <Version> + <revision>1.15.2</revision> + <branch>master</branch> + <name></name> + <created>2019-02-26</created> + <file-release rdf:resource="https://gstreamer.freedesktop.org/src/gstreamer-vaapi/gstreamer-vaapi-1.15.2.tar.xz" /> + </Version> + </release> + + <release> + <Version> <revision>1.15.1</revision> <branch>master</branch> <name></name> diff --git a/meson.build b/meson.build index b32b7745..5b36d1b6 100644 --- a/meson.build +++ b/meson.build @@ -1,5 +1,5 @@ project('gstreamer-vaapi', 'c', - version : '1.15.1', + version : '1.15.2', meson_version : '>= 0.47.0', default_options : [ 'warning_level=1', 'buildtype=debugoptimized' ]) |