1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
|
Binding for a type of flexgen structure found on certain
STMicroelectronics consumer electronics SoC devices
This structure includes:
- a clock cross bar (represented by a mux element)
- a pre and final dividers (represented by a divider and gate elements)
Flexgen structure is a part of Clockgen[1].
Please find an example below:
Clockgen block diagram
-------------------------------------------------------------------
| Flexgen structure |
| --------------------------------------------- |
| | ------- -------- -------- | |
clk_sysin | | | | | | | | |
---|-----------------|-->| | | | | | | |
| | | | | | | | | | |
| | ------- | | | |Pre | |Final | | |
| | |PLL0 | | | | |Dividers| |Dividers| | |
| |->| | | | | | x32 | | x32 | | |
| | | odf_0|----|-->| | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | ------- | | | | | | | | |
| | | | | | | | | | |
| | ------- | | Clock | | | | | | |
| | |PLL1 | | | | | | | | | |
| |->| | | | Cross | | | | | | |
| | | odf_0|----|-->| | | | | | CLK_DIV[31:0]
| | | | | | Bar |====>| |====>| |===|=========>
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | ------- | | | | | | | | |
| | | | | | | | | | |
| | ------- | | | | | | | | |
| | |QUADFS | | | | | | | | | |
| |->| ch0|----|-->| | | | | | | |
| | | | | | | | | | | |
| | ch1|----|-->| | | | | | | |
| | | | | | | | | | | |
| | ch2|----|-->| | | DIV | | DIV | | |
| | | | | | | 1 to | | 1 to | | |
| | ch3|----|-->| | | 1024 | | 64 | | |
| ------- | | | | | | | | |
| | ------- -------- -------- | |
| -------------------------------------------- |
| |
-------------------------------------------------------------------
This binding uses the common clock binding[2].
[1] Documentation/devicetree/bindings/clock/st/st,clkgen.txt
[2] Documentation/devicetree/bindings/clock/clock-bindings.txt
Required properties:
- compatible : shall be:
"st,flexgen"
"st,flexgen-audio", "st,flexgen" (enable clock propagation on parent for
audio use case)
"st,flexgen-video", "st,flexgen" (enable clock propagation on parent
and activate synchronous mode)
"st,flexgen-stih407-a0"
"st,flexgen-stih410-a0"
"st,flexgen-stih407-c0"
"st,flexgen-stih410-c0"
"st,flexgen-stih418-c0"
"st,flexgen-stih407-d0"
"st,flexgen-stih410-d0"
"st,flexgen-stih407-d2"
"st,flexgen-stih418-d2"
"st,flexgen-stih407-d3"
- #clock-cells : from common clock binding; shall be set to 1 (multiple clock
outputs).
- clocks : must be set to the parent's phandle. it could be output clocks of
a quadsfs or/and a pll or/and clk_sysin (up to 7 clocks)
- clock-output-names : List of strings used to name the clock outputs.
Example:
clk_s_c0_flexgen: clk-s-c0-flexgen {
#clock-cells = <1>;
compatible = "st,flexgen";
clocks = <&clk_s_c0_pll0 0>,
<&clk_s_c0_pll1 0>,
<&clk_s_c0_quadfs 0>,
<&clk_s_c0_quadfs 1>,
<&clk_s_c0_quadfs 2>,
<&clk_s_c0_quadfs 3>,
<&clk_sysin>;
clock-output-names = "clk-icn-gpu",
"clk-fdma",
"clk-nand",
"clk-hva",
"clk-proc-stfe",
"clk-proc-tp",
"clk-rx-icn-dmu",
"clk-rx-icn-hva",
"clk-icn-cpu",
"clk-tx-icn-dmu",
"clk-mmc-0",
"clk-mmc-1",
"clk-jpegdec",
"clk-ext2fa9",
"clk-ic-bdisp-0",
"clk-ic-bdisp-1",
"clk-pp-dmu",
"clk-vid-dmu",
"clk-dss-lpc",
"clk-st231-aud-0",
"clk-st231-gp-1",
"clk-st231-dmu",
"clk-icn-lmi",
"clk-tx-icn-disp-1",
"clk-icn-sbc",
"clk-stfe-frc2",
"clk-eth-phy",
"clk-eth-ref-phyclk",
"clk-flash-promip",
"clk-main-disp",
"clk-aux-disp",
"clk-compo-dvp";
};
|
