| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The functions th1520_mbox_suspend_noirq and th1520_mbox_resume_noirq are
intended to save and restore the interrupt mask registers in the MBOX
ICU0. However, the array used to store these registers was incorrectly
sized, leading to memory corruption when accessing all four registers.
This commit corrects the array size to accommodate all four interrupt
mask registers, preventing memory corruption during suspend and resume
operations.
Fixes: 5d4d263e1c6b ("mailbox: Introduce support for T-head TH1520 Mailbox driver")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/a99e72be-8490-4960-ad26-cbfef6af238f@stanley.mountain/
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
struct zynqmp_ipi_pdata __percpu *pdata is not a per-cpu variable,
so it should not be annotated with __percpu annotation.
Remove invalid __percpu annotation to fix several
zynqmp-ipi-mailbox.c:920:15: warning: incorrect type in assignment (different address spaces)
zynqmp-ipi-mailbox.c:920:15: expected struct zynqmp_ipi_pdata [noderef] __percpu *pdata
zynqmp-ipi-mailbox.c:920:15: got void *
zynqmp-ipi-mailbox.c:927:56: warning: incorrect type in argument 3 (different address spaces)
zynqmp-ipi-mailbox.c:927:56: expected unsigned int [usertype] *out_value
zynqmp-ipi-mailbox.c:927:56: got unsigned int [noderef] __percpu *
...
and several
drivers/mailbox/zynqmp-ipi-mailbox.c:924:9: warning: dereference of noderef expression
...
sparse warnings.
There were no changes in the resulting object file.
Cc: stable@vger.kernel.org
Fixes: 6ffb1635341b ("mailbox: zynqmp: handle SGI for shared IPI")
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Tanmay Shah <tanmay.shah@amd.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
The Samsung Exynos mailbox controller, used on Google GS101 SoC, has 16
flag bits for hardware interrupt generation and a shared register for
passing mailbox messages. When the controller is used by the
ACPM interface the shared register is ignored and the mailbox controller
acts as a doorbell. The controller just raises the interrupt to APM
after the ACPM interface has written the message to SRAM.
Add support for the Samsung Exynos mailbox controller.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
IPQ5424 mailbox do not have clock support and reuses msm8994_apcs_data.
Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
For some SoCs, boot firmware is using the same IPCC instance used
by Linux and it has kept CLEAR_ON_RECV_RD set which basically means
interrupt pending registers are cleared when RECV_ID is read and the
register automatically updates to the next pending interrupt/client
status based on priority.
Clear the CLEAR_ON_RECV_RD if it is set from the boot firmware.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Add a mailbox controller driver for the Microchip Inter-processor
Communication (IPC), which is used to send and receive data between
processors.
The driver uses the RISC-V Supervisor Binary Interface (SBI) to
communicate with software running in machine mode (M-mode) to access
the IPC hardware block.
Additional details on the Microchip vendor extension and the IPC
function IDs described in the driver can be found in the following
documentation:
https://github.com/linux4microchip/microchip-sbi-ecall-extension
This SBI interface in this driver is compatible with the Mi-V Inter-hart
Communication (IHC) IP.
Transmitting and receiving data through the mailbox framework is done
through struct mchp_ipc_msg.
Signed-off-by: Valentina Fernandez <valentina.fernandezalanis@microchip.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
The Tegra RCE (Camera) driver expects the mailbox to be empty before
processing the IVC messages. On RT kernel, the threads processing the
IVC messages (which are invoked after `mbox_chan_received_data()` is
called) may be on a different CPU or running with a higher priority
than the HSP interrupt handler thread. This can cause it to act on the
message before the mailbox gets cleared in the HSP interrupt handler
resulting in a loss of IVC notification.
Fix this by clearing the mailbox data register before calling
`mbox_chan_received_data()`.
Fixes: 8f585d14030d ("mailbox: tegra-hsp: Add tegra_hsp_sm_ops")
Fixes: 74c20dd0f892 ("mailbox: tegra-hsp: Add 128-bit shared mailbox support")
Cc: stable@vger.kernel.org
Signed-off-by: Pekka Pessi <ppessi@nvidia.com>
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
This code accidentally checks ->ctrl_base instead of ->mbox_base so the
error handling can never be triggered.
Fixes: a4123ffab9ec ("mailbox: mpfs: support new, syscon based, devicetree configuration")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
The devm_ioremap() function doesn't return error pointers, it returns
NULL. Update the error checking to match.
Fixes: 5d4d263e1c6b ("mailbox: Introduce support for T-head TH1520 Mailbox driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Michal Wilczynski <m.wilczynski@samsung.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is a small set of tty and serial driver updates for 6.13-rc1.
Nothing major at all this time, only some small changes:
- few device tree binding updates
- 8250_exar serial driver updates
- imx serial driver updates
- sprd_serial driver updates
- other tiny serial driver updates, full details in the shortlog
All of these have been in linux-next for a while with one reported
issue, but that commit has now been reverted"
* tag 'tty-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (37 commits)
Revert "serial: sh-sci: Clean sci_ports[0] after at earlycon exit"
serial: amba-pl011: fix build regression
dt-bindings: serial: Add a new compatible string for ums9632
serial: sprd: Add support for sc9632
tty/serial/altera_uart: unwrap error log string
tty/serial/altera_jtaguart: unwrap error log string
serial: amba-pl011: Fix RX stall when DMA is used
tty: ldsic: fix tty_ldisc_autoload sysctl's proc_handler
serial: 8250_fintek: Add support for F81216E
serial: sh-sci: Clean sci_ports[0] after at earlycon exit
tty: atmel_serial: Fix typo retreives to retrieves
tty: atmel_serial: Use devm_platform_ioremap_resource()
serial: 8250: omap: Move pm_runtime_get_sync
tty: serial: samsung: Add Exynos8895 compatible
dt-bindings: serial: samsung: Add samsung,exynos8895-uart compatible
serial: 8250_dw: Add Sophgo SG2044 quirk
dt-bindings: serial: snps-dw-apb-uart: Add Sophgo SG2044 uarts
dt-bindings: serial: snps,dw-apb-uart: merge duplicate compatible entry.
altera_jtaguart: Use dev_err() to report error attaching IRQ
altera_uart: Use dev_err() to report error attaching IRQ handler
...
|
|
Type 4 PCC channels have an option to send back a response
to the platform when they are done processing the request.
The flag to indicate whether or not to respond is inside
the message body, and thus is not available to the pcc
mailbox.
If the flag is not set, still set command completion
bit after processing message.
In order to read the flag, this patch maps the shared
buffer to virtual memory. To avoid duplication of mapping
the shared buffer is then made available to be used by
the driver that uses the mailbox.
Signed-off-by: Adam Young <admiyo@os.amperecomputing.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/mailbox to use .remove(),
with the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
Make a few indentions consistent while touching these struct
initializers.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Replace %i with %u in snprintf() because it is "unsigned int".
Signed-off-by: zhang jiao <zhangjiao2@cmss.chinamobile.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Both the inner and outer loops in this code use the "i" iterator.
The inner loop should really use a different iterator.
It doesn't affect things in practice because the data comes from the
device tree. The "protocol" and "windows" variables are going to be
zero. That means we're always going to hit the "return &chans[channel];"
statement and we're not going to want to iterate through the outer
loop again.
Still it's worth fixing this for future use cases.
Fixes: 5a6338cce9f4 ("mailbox: arm_mhuv2: Add driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
As per zynqmp-ipi bindings, zynqmp IPI node can have multiple child nodes.
Current IPI setup function is set only for first child node. If IPI node
has multiple child nodes in the device-tree, then IPI setup fails for
child nodes other than first child node. In such case kernel will crash.
Fix this crash by registering IPI setup function for each available child
node.
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
This driver was tested using the drm/imagination GPU driver. It was able
to successfully power on the GPU, by passing a command through mailbox
from E910 core to E902 that's responsible for powering up the GPU. The
GPU driver was able to read the BVNC version from control registers,
which confirms it was successfully powered on.
[ 33.957467] powervr ffef400000.gpu: [drm] loaded firmware
powervr/rogue_36.52.104.182_v1.fw
[ 33.966008] powervr ffef400000.gpu: [drm] FW version v1.0 (build
6621747 OS)
[ 38.978542] powervr ffef400000.gpu: [drm] *ERROR* Firmware failed to
boot
Though the driver still fails to boot the firmware, the mailbox driver
works when used with the not-yet-upstreamed firmware AON driver. There
is ongoing work to get the BXM-4-64 supported with the drm/imagination
driver [1], though it's not completed yet.
This work is based on the driver from the vendor kernel [2].
Link: https://gitlab.freedesktop.org/imagination/linux-firmware/-/issues/2 [1]
Link: https://github.com/revyos/thead-kernel.git [2]
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
It should be size of the struct clk_bulk_data, not data pointer pass to
devm_kcalloc().
Fixes: aa1609f571ca ("mailbox: mtk-cmdq: Dynamically allocate clk_bulk_data structure")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
The TI message manager driver can be compiled without ARCH_KEYSTONE
nor ARCH_K3 enabled. Allow it to be built under COMPILE_TEST.
Signed-off-by: Andrew Davis <afd@ti.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
When OF support is disabled the of_device_id struct match table can be
conditionally compiled out, this helper allows the assignment to also be
turned into a NULL conditionally. When the of_device_id struct is not
conditionally defined based on OF then the table will be unused causing a
warning. The two options are to either set the table as _maybe_unused, or
to just remove this helper since the table will always be defined.
Do the latter here.
Signed-off-by: Andrew Davis <afd@ti.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
The qcom-cpucp mailbox irq is expected to function during suspend-resume
cycle particularly when the scmi cpufreq driver can query the current
frequency using the get_level message after the cpus are brought up during
resume. Hence mark the irq with IRQF_NO_SUSPEND flag to fix the do_xfer
failures we see during resume.
Err Logs:
arm-scmi firmware:scmi: timed out in resp(caller:do_xfer+0x164/0x568)
cpufreq: cpufreq_online: ->get() failed
Reported-by: Johan Hovold <johan+linaro@kernel.org>
Closes: https://lore.kernel.org/lkml/ZtgFj1y5ggipgEOS@hovoldconsulting.com/
Fixes: 0e2a9a03106c ("mailbox: Add support for QTI CPUCP mailbox controller")
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
pm_runtime_put_autosuspend() will soon be changed to include a call to
pm_runtime_mark_last_busy(). This patch switches the current users to
__pm_runtime_put_autosuspend() which will continue to have the
functionality of old pm_runtime_put_autosuspend().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
The two previous bindings for this hardware were incorrect, as the
control/status and interrupt register regions should have been described
as syscons and dealt with via regmap in the driver. Add support for
accessing these registers using that method now, so that the hwmon
driver can be supported without using auxdev or hacks with io_remap().
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Nothing in kfifo.h directly needs dma-mapping.h, only two macros
use DMA_MAPPING_ERROR when actually instantiated. Drop the
dma-mapping.h include to reduce include bloat.
Add an explicity <linux/io.h> include to drivers/mailbox/omap-mailbox.c
as that file uses __raw_readl and __raw_writel through a complicated
include chain involving <linux/dma-mapping.h>
Fixes: d52b761e4b1a ("kfifo: add kfifo_dma_out_prepare_mapped()")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241023055317.313234-1-hch@lst.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Selecting CONFIG_OMAP2PLUS_MBOX while compile testing
causes a build failure:
WARNING: unmet direct dependencies detected for OMAP2PLUS_MBOX
Depends on [n]: MAILBOX [=y] && (ARCH_OMAP2PLUS || ARCH_K3)
Selected by [m]:
- TI_K3_M4_REMOTEPROC [=m] && REMOTEPROC [=y] && (ARCH_K3 || COMPILE_TEST [=y])
Using 'select' to force-enable another subsystem is generally
a mistake and causes problems such as this one, so change the
three drivers that link against this driver to use 'depends on'
instead, and ensure the driver itself can be compile tested
regardless of the platform.
When compile-testing without CONFIG_TI_SCI_PROTOCOL=m, there
is a chance for a link failure, so add a careful dependency
on that.
arm-linux-gnueabi-ld: drivers/remoteproc/ti_k3_m4_remoteproc.o: in function `k3_m4_rproc_probe':
ti_k3_m4_remoteproc.c:(.text.k3_m4_rproc_probe+0x76): undefined reference to `devm_ti_sci_get_by_phandle'
Fixes: ebcf9008a895 ("remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Andrew Davis <afd@ti.com>
Reviewed-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Use of_property_match_string() instead of open-coding the search. With
this, of_get_property() can be removed as there is no need to check for
"mbox-names" presence first.
This is part of a larger effort to remove callers of of_get_property()
and similar functions. of_get_property() leaks the DT property data
pointer which is a problem for dynamically allocated nodes which may
be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
During noirq suspend phase the Raspberry Pi power driver suffer of
firmware property timeouts. The reason is that the IRQ of the underlying
BCM2835 mailbox is disabled and rpi_firmware_property_list() will always
run into a timeout [1].
Since the VideoCore side isn't consider as a wakeup source, set the
IRQF_NO_SUSPEND flag for the mailbox IRQ in order to keep it enabled
during suspend-resume cycle.
[1]
PM: late suspend of devices complete after 1.754 msecs
WARNING: CPU: 0 PID: 438 at drivers/firmware/raspberrypi.c:128
rpi_firmware_property_list+0x204/0x22c
Firmware transaction 0x00028001 timeout
Modules linked in:
CPU: 0 PID: 438 Comm: bash Tainted: G C 6.9.3-dirty #17
Hardware name: BCM2835
Call trace:
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x34/0x44
dump_stack_lvl from __warn+0x88/0xec
__warn from warn_slowpath_fmt+0x7c/0xb0
warn_slowpath_fmt from rpi_firmware_property_list+0x204/0x22c
rpi_firmware_property_list from rpi_firmware_property+0x68/0x8c
rpi_firmware_property from rpi_firmware_set_power+0x54/0xc0
rpi_firmware_set_power from _genpd_power_off+0xe4/0x148
_genpd_power_off from genpd_sync_power_off+0x7c/0x11c
genpd_sync_power_off from genpd_finish_suspend+0xcc/0xe0
genpd_finish_suspend from dpm_run_callback+0x78/0xd0
dpm_run_callback from device_suspend_noirq+0xc0/0x238
device_suspend_noirq from dpm_suspend_noirq+0xb0/0x168
dpm_suspend_noirq from suspend_devices_and_enter+0x1b8/0x5ac
suspend_devices_and_enter from pm_suspend+0x254/0x2e4
pm_suspend from state_store+0xa8/0xd4
state_store from kernfs_fop_write_iter+0x154/0x1a0
kernfs_fop_write_iter from vfs_write+0x12c/0x184
vfs_write from ksys_write+0x78/0xc0
ksys_write from ret_fast_syscall+0x0/0x54
Exception stack(0xcc93dfa8 to 0xcc93dff0)
[...]
PM: noirq suspend of devices complete after 3095.584 msecs
Link: https://github.com/raspberrypi/firmware/issues/1894
Fixes: 0bae6af6d704 ("mailbox: Enable BCM2835 mailbox support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
The devm_clk_get_enabled() helpers:
- call devm_clk_get()
- call clk_prepare_enable() and register what is needed in order to
call clk_disable_unprepare() when needed, as a managed resource.
This simplifies the code and avoids the calls to clk_disable_unprepare().
Due to clk only used in probe, not in suspend\resume, this pointer can
remove from sprd_mbox_priv to save a little memory.
Signed-off-by: Huan Yang <link@vivo.com>
Reviewed-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
MODULE_DEVICE_TABLE(of, rockchip_mbox_of_match) could let the module
properly autoloaded based on the alias from of_device_id table. It
should be 'rockchip_mbox_of_match' instead of 'rockchp_mbox_of_match',
just fix it.
Fixes: f70ed3b5dc8b ("mailbox: rockchip: Add Rockchip mailbox driver")
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
There are several MUs for different usage, SCMI MU, ELE MU, RemotePROC
MU. Using "imx_mu_chan" in interrupt name would be hard to identify
which MU triggers interrupt, so use device name to make it easy to know
which MU triggers which interrupt.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
The ARM MHUv3 controller is only present on ARM64 SoCs. Hence add a
dependency on ARM64, to prevent asking the user about this driver when
configuring a kernel for a different architecture than ARM64.
Fixes: ca1a8680b134b5e6 ("mailbox: arm_mhuv3: Add driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
devm_pm_runtime_enable()
When mtk-cmdq unbinds, a WARN_ON message with condition
pm_runtime_get_sync() < 0 occurs.
According to the call tracei below:
cmdq_mbox_shutdown
mbox_free_channel
mbox_controller_unregister
__devm_mbox_controller_unregister
...
The root cause can be deduced to be calling pm_runtime_get_sync() after
calling pm_runtime_disable() as observed below:
1. CMDQ driver uses devm_mbox_controller_register() in cmdq_probe()
to bind the cmdq device to the mbox_controller, so
devm_mbox_controller_unregister() will automatically unregister
the device bound to the mailbox controller when the device-managed
resource is removed. That means devm_mbox_controller_unregister()
and cmdq_mbox_shoutdown() will be called after cmdq_remove().
2. CMDQ driver also uses devm_pm_runtime_enable() in cmdq_probe() after
devm_mbox_controller_register(), so that devm_pm_runtime_disable()
will be called after cmdq_remove(), but before
devm_mbox_controller_unregister().
To fix this problem, cmdq_probe() needs to move
devm_mbox_controller_register() after devm_pm_runtime_enable() to make
devm_pm_runtime_disable() be called after
devm_mbox_controller_unregister().
Fixes: 623a6143a845 ("mailbox: mediatek: Add Mediatek CMDQ driver")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
There are cases where remote that is acking mailbox message can take longer
than the default tx_poll_period value. Therefore, enable this to be mutable.
Added tx_poll_period field while inserting the module to set the
poll period for ack after sending mailbox message.
Signed-off-by: Ben Levinsky <ben.levinsky@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
This newly added driver fails compile testing on 32-bit architectures
because it relies on 64-bit MMIO register access:
drivers/mailbox/qcom-cpucp-mbox.c: In function 'qcom_cpucp_mbox_irq_fn':
drivers/mailbox/qcom-cpucp-mbox.c:54:18: error: implicit declaration of function 'readq'; did you mean 'readb'? [-Wimplicit-function-declaration]
54 | status = readq(cpucp->rx_base + APSS_CPUCP_RX_MBOX_STAT);
| ^~~~~
| readb
drivers/mailbox/qcom-cpucp-mbox.c:65:17: error: implicit declaration of function 'writeq'; did you mean 'writeb'? [-Wimplicit-function-declaration]
65 | writeq(BIT(i), cpucp->rx_base + APSS_CPUCP_RX_MBOX_CLEAR);
| ^~~~~~
| writeb
Change the Kconfig dependency to disallow that configuration as well.
Fixes: 0e2a9a03106c ("mailbox: Add support for QTI CPUCP mailbox controller")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Add support for CPUSS Control Processor (CPUCP) mailbox controller,
this driver enables communication between AP and CPUCP by acting as
a doorbell between them.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mailbox/mtk-cmdq-mailbox.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
'pdf_dma_map' has been unused since the original
commit a24532f8d17b ("mailbox: Add Broadcom PDC mailbox driver").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Two TXDB_V2 channels are used between Linux and System Manager(SM).
Channel0 for normal TX, Channel 1 for notification completion.
The TXDB_V2 trigger logic is using imx_mu_xcr_rmw which uses
read/modify/update logic.
Note: clear MUB GSR BITs, the MUA side GCR BITs will also got cleared per
hardware design.
Channel0 Linux
read GCR->modify GCR->write GCR->M33 SM->read GSR----->clear GSR
|-(1)-|
Channel1 Linux start in time slot(1)
read GCR->modify GCR->write GCR->M33 SM->read GSR->clear GSR
So Channel1 read GCR will read back the GCR that Channel0 wrote, because
M33 has not finish clear GSR, this means Channel1 GCR writing will
trigger Channel1 and Channel0 interrupt both which is wrong.
Channel0 will be freed(SCMI channel status set to FREE) in M33 SM when
processing the 1st Channel0 interrupt. So when 2nd interrupt trigger
(channel 0/1 trigger together), SM will see a freed Channel0, and report
protocol error.
To address the issue, not using read/modify/update logic, just use
write, because write 0 to GCR will be ignored. And after write MUA GCR,
wait the SM to clear MUB GSR by looping MUA GCR value.
Fixes: 5bfe4067d350 ("mailbox: imx: support channel type tx doorbell v2")
Reviewed-by: Ranjani Vaidyanathan <ranjani.vaidyanathan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Multiple mailbox users can share one interrupt line. This flag was
mistakenly dropped as part of the FIFO removal. Mark the IRQ as shared.
Reported-by: Beleswar Padhi <b-padhi@ti.com>
Fixes: 3f58c1f4206f ("mailbox: omap: Remove kernel FIFO message queuing")
Signed-off-by: Andrew Davis <afd@ti.com>
Tested-by: Beleswar Padhi <b-padhi@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Now that the clock probing code uses devm_kasprintf(), there is
no more restriction on the number of GCEs: dynamically allocate
the clk_bulk_data clocks array to improve flexibility and also
to get a slight memory saving on platforms featuring only one
CMDQ mailbox (and consequently only one Global Command Engine).
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Move the clocks probe to a new cmdq_get_clocks() function; while
at it, partially refactor the code:
Drop the clk_names[] array and assign clock names to the array
of clk_bulk_data with devm_kasprintf() instead, slightly reduce
the indentation for the multi-gce clock probe path and add a
comment describing the reason why we get clocks of other GCE
instance instead of just the clock from the one that it is
getting probed.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
The Global Command Engine mailbox has only one clock hence
requiring clock-names is useless.
Get the first (and only) clock instead, without name checks.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
irq_to_desc() is not exported to loadable modules, so this driver now
fails to link in some configurations:
ERROR: modpost: "irq_to_desc" [drivers/mailbox/zynqmp-ipi-mailbox.ko] undefined!
I can't see a purpose for this call, since the return value is unused
and probably left over from some code refactoring.
Address the link failure by just removing the line.
Fixes: 6ffb1635341b ("mailbox: zynqmp: handle SGI for shared IPI")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Tanmay Shah <tanmay.shah@amd.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
The only generic interface to execute asynchronously in the BH context is
tasklet; however, it's marked deprecated and has some design flaws. To
replace tasklets, BH workqueue support was recently added. A BH workqueue
behaves similarly to regular workqueues except that the queued work items
are executed in the BH context.
Based on the work done by Tejun Heo <tj@kernel.org>
Branch: https://git.kernel.org/pub/scm/linux/kernel/git/tj/wq.git for-6.10
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
The return value of pm_runtime_get_sync() in cmdq_mbox_shutdown()
will return 1 when pm runtime state is active, and we don't want to
get the warning message in this case.
So we change the return value < 0 for WARN_ON().
Fixes: 8afe816b0c99 ("mailbox: mtk-cmdq-mailbox: Implement Runtime PM with autosuspend")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Add MODULE_DEVICE_TABLE(), so this module could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
At least one IPI is used in TF-A for communication with PMC firmware.
If this IPI needs to be used by other agents such as RPU then, IPI
system interrupt can't be generated in mailbox driver. In such case
TF-A generates SGI to mailbox driver for IPI notification.
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Signed-off-by: Saeed Nowshadi <saeed.nowshadi@amd.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Add support for ARM MHUv3 mailbox controller.
Support is limited to the MHUv3 Doorbell extension using only the PBX/MBX
combined interrupts.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
The kernel FIFO queue has a couple issues. The biggest issue is that
it causes extra latency in a path that can be used in real-time tasks,
such as communication with real-time remote processors.
The whole FIFO idea itself looks to be a leftover from before the
unified mailbox framework. The current mailbox framework expects
mbox_chan_received_data() to be called with data immediately as it
arrives. Remove the FIFO and pass the messages to the mailbox
framework directly as part of a threaded IRQ handler.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
It is much more clear to check if the hardware FIFO is full and return
EBUSY if true. This allows us to also remove one level of indention
from the core of this function. It also makes the similarities between
omap_mbox_chan_send_noirq() and omap_mbox_chan_send() more obvious.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
This function only checks if mbox_chan *chan is not NULL, but that cannot
be the case and if it was returning NULL which is not later checked
doesn't save us from this. The second check for chan->con_priv is
completely redundant as if it was NULL we would return NULL just the
same. Simply dereference con_priv directly and remove this function.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
