diff options
Diffstat (limited to 'include/linux')
| -rw-r--r-- | include/linux/mfd/samsung/core.h | 11 | ||||
| -rw-r--r-- | include/linux/platform_data/lp8755.h | 71 | ||||
| -rw-r--r-- | include/linux/regulator/driver.h | 6 |
3 files changed, 84 insertions, 4 deletions
diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h index b50c38f8bc48..f0f4de3b4ccc 100644 --- a/include/linux/mfd/samsung/core.h +++ b/include/linux/mfd/samsung/core.h @@ -26,6 +26,7 @@ enum sec_device_type { /** * struct sec_pmic_dev - s5m87xx master device for sub-drivers * @dev: master device of the chip (can be used to access platform data) + * @pdata: pointer to private data used to pass platform data to child * @i2c: i2c client private data for regulator * @rtc: i2c client private data for rtc * @iolock: mutex for serializing io access @@ -39,6 +40,7 @@ enum sec_device_type { */ struct sec_pmic_dev { struct device *dev; + struct sec_platform_data *pdata; struct regmap *regmap; struct i2c_client *i2c; struct i2c_client *rtc; @@ -82,11 +84,11 @@ struct sec_platform_data { int buck_gpios[3]; int buck_ds[3]; - int buck2_voltage[8]; + unsigned int buck2_voltage[8]; bool buck2_gpiodvs; - int buck3_voltage[8]; + unsigned int buck3_voltage[8]; bool buck3_gpiodvs; - int buck4_voltage[8]; + unsigned int buck4_voltage[8]; bool buck4_gpiodvs; int buck_set1; @@ -127,6 +129,7 @@ struct sec_platform_data { struct sec_regulator_data { int id; struct regulator_init_data *initdata; + struct device_node *reg_node; }; /* @@ -136,7 +139,7 @@ struct sec_regulator_data { */ struct sec_opmode_data { int id; - int mode; + unsigned int mode; }; /* diff --git a/include/linux/platform_data/lp8755.h b/include/linux/platform_data/lp8755.h new file mode 100644 index 000000000000..a7fd0776c9bf --- /dev/null +++ b/include/linux/platform_data/lp8755.h @@ -0,0 +1,71 @@ +/* + * LP8755 High Performance Power Management Unit Driver:System Interface Driver + * + * Copyright (C) 2012 Texas Instruments + * + * Author: Daniel(Geon Si) Jeong <daniel.jeong@ti.com> + * G.Shark Jeong <gshark.jeong@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _LP8755_H +#define _LP8755_H + +#include <linux/regulator/consumer.h> + +#define LP8755_NAME "lp8755-regulator" +/* + *PWR FAULT : power fault detected + *OCP : over current protect activated + *OVP : over voltage protect activated + *TEMP_WARN : thermal warning + *TEMP_SHDN : thermal shutdonw detected + *I_LOAD : current measured + */ +#define LP8755_EVENT_PWR_FAULT REGULATOR_EVENT_FAIL +#define LP8755_EVENT_OCP REGULATOR_EVENT_OVER_CURRENT +#define LP8755_EVENT_OVP 0x10000 +#define LP8755_EVENT_TEMP_WARN 0x2000 +#define LP8755_EVENT_TEMP_SHDN REGULATOR_EVENT_OVER_TEMP +#define LP8755_EVENT_I_LOAD 0x40000 + +enum lp8755_bucks { + LP8755_BUCK0 = 0, + LP8755_BUCK1, + LP8755_BUCK2, + LP8755_BUCK3, + LP8755_BUCK4, + LP8755_BUCK5, + LP8755_BUCK_MAX, +}; + +/** + * multiphase configuration options + */ +enum lp8755_mphase_config { + MPHASE_CONF0, + MPHASE_CONF1, + MPHASE_CONF2, + MPHASE_CONF3, + MPHASE_CONF4, + MPHASE_CONF5, + MPHASE_CONF6, + MPHASE_CONF7, + MPHASE_CONF8, + MPHASE_CONF_MAX +}; + +/** + * struct lp8755_platform_data + * @mphase_type : Multiphase Switcher Configurations. + * @buck_data : buck0~6 init voltage in uV + */ +struct lp8755_platform_data { + int mphase; + struct regulator_init_data *buck_data[LP8755_BUCK_MAX]; +}; +#endif diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index d10bb0f39c5e..23070fd83872 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -193,6 +193,10 @@ enum regulator_type { * * @vsel_reg: Register for selector when using regulator_regmap_X_voltage_ * @vsel_mask: Mask for register bitfield used for selector + * @apply_reg: Register for initiate voltage change on the output when + * using regulator_set_voltage_sel_regmap + * @apply_bit: Register bitfield used for initiate voltage change on the + * output when using regulator_set_voltage_sel_regmap * @enable_reg: Register for control when using regmap enable/disable ops * @enable_mask: Mask for control when using regmap enable/disable ops * @@ -218,6 +222,8 @@ struct regulator_desc { unsigned int vsel_reg; unsigned int vsel_mask; + unsigned int apply_reg; + unsigned int apply_bit; unsigned int enable_reg; unsigned int enable_mask; unsigned int bypass_reg; |