summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/clocksource/Makefile1
-rw-r--r--drivers/clocksource/cyclone.c113
-rw-r--r--drivers/pci/Makefile1
-rw-r--r--drivers/scsi/qla1280.c7
-rw-r--r--drivers/video/Kconfig11
-rw-r--r--drivers/video/Makefile1
-rw-r--r--drivers/video/gbefb.c4
-rw-r--r--drivers/video/logo/Kconfig2
-rw-r--r--drivers/video/logo/logo.c2
-rw-r--r--drivers/video/sgivwfb.c889
10 files changed, 3 insertions, 1028 deletions
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index aed3488d9426..f3fe4cb4974b 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -1,6 +1,5 @@
obj-$(CONFIG_CLKSRC_OF) += clksrc-of.o
obj-$(CONFIG_ATMEL_TCB_CLKSRC) += tcb_clksrc.o
-obj-$(CONFIG_X86_CYCLONE_TIMER) += cyclone.o
obj-$(CONFIG_X86_PM_TIMER) += acpi_pm.o
obj-$(CONFIG_SCx200HR_TIMER) += scx200_hrt.o
obj-$(CONFIG_CS5535_CLOCK_EVENT_SRC) += cs5535-clockevt.o
diff --git a/drivers/clocksource/cyclone.c b/drivers/clocksource/cyclone.c
deleted file mode 100644
index 9e0998f22885..000000000000
--- a/drivers/clocksource/cyclone.c
+++ /dev/null
@@ -1,113 +0,0 @@
-#include <linux/clocksource.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/timex.h>
-#include <linux/init.h>
-
-#include <asm/pgtable.h>
-#include <asm/io.h>
-
-#include <asm/mach_timer.h>
-
-#define CYCLONE_CBAR_ADDR 0xFEB00CD0 /* base address ptr */
-#define CYCLONE_PMCC_OFFSET 0x51A0 /* offset to control register */
-#define CYCLONE_MPCS_OFFSET 0x51A8 /* offset to select register */
-#define CYCLONE_MPMC_OFFSET 0x51D0 /* offset to count register */
-#define CYCLONE_TIMER_FREQ 99780000 /* 100Mhz, but not really */
-#define CYCLONE_TIMER_MASK CLOCKSOURCE_MASK(32) /* 32 bit mask */
-
-int use_cyclone = 0;
-static void __iomem *cyclone_ptr;
-
-static cycle_t read_cyclone(struct clocksource *cs)
-{
- return (cycle_t)readl(cyclone_ptr);
-}
-
-static struct clocksource clocksource_cyclone = {
- .name = "cyclone",
- .rating = 250,
- .read = read_cyclone,
- .mask = CYCLONE_TIMER_MASK,
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static int __init init_cyclone_clocksource(void)
-{
- unsigned long base; /* saved value from CBAR */
- unsigned long offset;
- u32 __iomem* volatile cyclone_timer; /* Cyclone MPMC0 register */
- u32 __iomem* reg;
- int i;
-
- /* make sure we're on a summit box: */
- if (!use_cyclone)
- return -ENODEV;
-
- printk(KERN_INFO "Summit chipset: Starting Cyclone Counter.\n");
-
- /* find base address: */
- offset = CYCLONE_CBAR_ADDR;
- reg = ioremap_nocache(offset, sizeof(reg));
- if (!reg) {
- printk(KERN_ERR "Summit chipset: Could not find valid CBAR register.\n");
- return -ENODEV;
- }
- /* even on 64bit systems, this is only 32bits: */
- base = readl(reg);
- iounmap(reg);
- if (!base) {
- printk(KERN_ERR "Summit chipset: Could not find valid CBAR value.\n");
- return -ENODEV;
- }
-
- /* setup PMCC: */
- offset = base + CYCLONE_PMCC_OFFSET;
- reg = ioremap_nocache(offset, sizeof(reg));
- if (!reg) {
- printk(KERN_ERR "Summit chipset: Could not find valid PMCC register.\n");
- return -ENODEV;
- }
- writel(0x00000001,reg);
- iounmap(reg);
-
- /* setup MPCS: */
- offset = base + CYCLONE_MPCS_OFFSET;
- reg = ioremap_nocache(offset, sizeof(reg));
- if (!reg) {
- printk(KERN_ERR "Summit chipset: Could not find valid MPCS register.\n");
- return -ENODEV;
- }
- writel(0x00000001,reg);
- iounmap(reg);
-
- /* map in cyclone_timer: */
- offset = base + CYCLONE_MPMC_OFFSET;
- cyclone_timer = ioremap_nocache(offset, sizeof(u64));
- if (!cyclone_timer) {
- printk(KERN_ERR "Summit chipset: Could not find valid MPMC register.\n");
- return -ENODEV;
- }
-
- /* quick test to make sure its ticking: */
- for (i = 0; i < 3; i++){
- u32 old = readl(cyclone_timer);
- int stall = 100;
-
- while (stall--)
- barrier();
-
- if (readl(cyclone_timer) == old) {
- printk(KERN_ERR "Summit chipset: Counter not counting! DISABLED\n");
- iounmap(cyclone_timer);
- cyclone_timer = NULL;
- return -ENODEV;
- }
- }
- cyclone_ptr = cyclone_timer;
-
- return clocksource_register_hz(&clocksource_cyclone,
- CYCLONE_TIMER_FREQ);
-}
-
-arch_initcall(init_cyclone_clocksource);
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index e2501ac6fe84..e04fe2d9df3b 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -38,7 +38,6 @@ obj-$(CONFIG_ARM) += setup-irq.o
obj-$(CONFIG_UNICORE32) += setup-irq.o
obj-$(CONFIG_SUPERH) += setup-irq.o
obj-$(CONFIG_MIPS) += setup-irq.o
-obj-$(CONFIG_X86_VISWS) += setup-irq.o
obj-$(CONFIG_TILE) += setup-irq.o
obj-$(CONFIG_SPARC_LEON) += setup-irq.o
obj-$(CONFIG_M68K) += setup-irq.o
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index 97dabd39b092..158020522dfb 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -379,14 +379,7 @@
#define DEBUG_PRINT_NVRAM 0
#define DEBUG_QLA1280 0
-/*
- * The SGI VISWS is broken and doesn't support MMIO ;-(
- */
-#ifdef CONFIG_X86_VISWS
-#define MEMORY_MAPPED_IO 0
-#else
#define MEMORY_MAPPED_IO 1
-#endif
#include "qla1280.h"
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 97a8f3a12a7b..b4b209ce8029 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -796,18 +796,9 @@ config FB_HGA
As this card technology is at least 25 years old,
most people will answer N here.
-config FB_SGIVW
- tristate "SGI Visual Workstation framebuffer support"
- depends on FB && X86_VISWS
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- SGI Visual Workstation support for framebuffer graphics.
-
config FB_GBE
bool "SGI Graphics Backend frame buffer support"
- depends on (FB = y) && (SGI_IP32 || X86_VISWS)
+ depends on (FB = y) && SGI_IP32
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 08d6a4ab3ace..1be26fe10592 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -75,7 +75,6 @@ obj-$(CONFIG_FB_CG14) += cg14.o sbuslib.o
obj-$(CONFIG_FB_P9100) += p9100.o sbuslib.o
obj-$(CONFIG_FB_TCX) += tcx.o sbuslib.o
obj-$(CONFIG_FB_LEO) += leo.o sbuslib.o
-obj-$(CONFIG_FB_SGIVW) += sgivwfb.o
obj-$(CONFIG_FB_ACORN) += acornfb.o
obj-$(CONFIG_FB_ATARI) += atafb.o c2p_iplan2.o atafb_mfb.o \
atafb_iplan2p2.o atafb_iplan2p4.o atafb_iplan2p8.o
diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c
index 4c7cb368a9dc..3ec65a878ac8 100644
--- a/drivers/video/gbefb.c
+++ b/drivers/video/gbefb.c
@@ -45,10 +45,6 @@ struct gbefb_par {
#define GBE_BASE 0x16000000 /* SGI O2 */
#endif
-#ifdef CONFIG_X86_VISWS
-#define GBE_BASE 0xd0000000 /* SGI Visual Workstation */
-#endif
-
/* macro for fastest write-though access to the framebuffer */
#ifdef CONFIG_MIPS
#ifdef CONFIG_CPU_R10000
diff --git a/drivers/video/logo/Kconfig b/drivers/video/logo/Kconfig
index 39ac49e0682c..0037104d66ac 100644
--- a/drivers/video/logo/Kconfig
+++ b/drivers/video/logo/Kconfig
@@ -54,7 +54,7 @@ config LOGO_PARISC_CLUT224
config LOGO_SGI_CLUT224
bool "224-color SGI Linux logo"
- depends on SGI_IP22 || SGI_IP27 || SGI_IP32 || X86_VISWS
+ depends on SGI_IP22 || SGI_IP27 || SGI_IP32
default y
config LOGO_SUN_CLUT224
diff --git a/drivers/video/logo/logo.c b/drivers/video/logo/logo.c
index b670cbda38e3..940cd196eef5 100644
--- a/drivers/video/logo/logo.c
+++ b/drivers/video/logo/logo.c
@@ -81,7 +81,7 @@ const struct linux_logo * __init_refok fb_find_logo(int depth)
logo = &logo_parisc_clut224;
#endif
#ifdef CONFIG_LOGO_SGI_CLUT224
- /* SGI Linux logo on MIPS/MIPS64 and VISWS */
+ /* SGI Linux logo on MIPS/MIPS64 */
logo = &logo_sgi_clut224;
#endif
#ifdef CONFIG_LOGO_SUN_CLUT224
diff --git a/drivers/video/sgivwfb.c b/drivers/video/sgivwfb.c
deleted file mode 100644
index bc74d0408998..000000000000
--- a/drivers/video/sgivwfb.c
+++ /dev/null
@@ -1,889 +0,0 @@
-/*
- * linux/drivers/video/sgivwfb.c -- SGI DBE frame buffer device
- *
- * Copyright (C) 1999 Silicon Graphics, Inc.
- * Jeffrey Newquist, newquist@engr.sgi.som
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-
-#include <asm/io.h>
-#include <asm/mtrr.h>
-#include <asm/visws/sgivw.h>
-
-#define INCLUDE_TIMING_TABLE_DATA
-#define DBE_REG_BASE par->regs
-#include <video/sgivw.h>
-
-struct sgivw_par {
- struct asregs *regs;
- u32 cmap_fifo;
- u_long timing_num;
-};
-
-#define FLATPANEL_SGI_1600SW 5
-
-/*
- * RAM we reserve for the frame buffer. This defines the maximum screen
- * size
- *
- * The default can be overridden if the driver is compiled as a module
- */
-
-static int ypan = 0;
-static int ywrap = 0;
-
-static int flatpanel_id = -1;
-
-static struct fb_fix_screeninfo sgivwfb_fix = {
- .id = "SGI Vis WS FB",
- .type = FB_TYPE_PACKED_PIXELS,
- .visual = FB_VISUAL_PSEUDOCOLOR,
- .mmio_start = DBE_REG_PHYS,
- .mmio_len = DBE_REG_SIZE,
- .accel = FB_ACCEL_NONE,
- .line_length = 640,
-};
-
-static struct fb_var_screeninfo sgivwfb_var = {
- /* 640x480, 8 bpp */
- .xres = 640,
- .yres = 480,
- .xres_virtual = 640,
- .yres_virtual = 480,
- .bits_per_pixel = 8,
- .red = { 0, 8, 0 },
- .green = { 0, 8, 0 },
- .blue = { 0, 8, 0 },
- .height = -1,
- .width = -1,
- .pixclock = 20000,
- .left_margin = 64,
- .right_margin = 64,
- .upper_margin = 32,
- .lower_margin = 32,
- .hsync_len = 64,
- .vsync_len = 2,
- .vmode = FB_VMODE_NONINTERLACED
-};
-
-static struct fb_var_screeninfo sgivwfb_var1600sw = {
- /* 1600x1024, 8 bpp */
- .xres = 1600,
- .yres = 1024,
- .xres_virtual = 1600,
- .yres_virtual = 1024,
- .bits_per_pixel = 8,
- .red = { 0, 8, 0 },
- .green = { 0, 8, 0 },
- .blue = { 0, 8, 0 },
- .height = -1,
- .width = -1,
- .pixclock = 9353,
- .left_margin = 20,
- .right_margin = 30,
- .upper_margin = 37,
- .lower_margin = 3,
- .hsync_len = 20,
- .vsync_len = 3,
- .vmode = FB_VMODE_NONINTERLACED
-};
-
-/*
- * Interface used by the world
- */
-int sgivwfb_init(void);
-
-static int sgivwfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info);
-static int sgivwfb_set_par(struct fb_info *info);
-static int sgivwfb_setcolreg(u_int regno, u_int red, u_int green,
- u_int blue, u_int transp,
- struct fb_info *info);
-static int sgivwfb_mmap(struct fb_info *info,
- struct vm_area_struct *vma);
-
-static struct fb_ops sgivwfb_ops = {
- .owner = THIS_MODULE,
- .fb_check_var = sgivwfb_check_var,
- .fb_set_par = sgivwfb_set_par,
- .fb_setcolreg = sgivwfb_setcolreg,
- .fb_fillrect = cfb_fillrect,
- .fb_copyarea = cfb_copyarea,
- .fb_imageblit = cfb_imageblit,
- .fb_mmap = sgivwfb_mmap,
-};
-
-/*
- * Internal routines
- */
-static unsigned long bytes_per_pixel(int bpp)
-{
- switch (bpp) {
- case 8:
- return 1;
- case 16:
- return 2;
- case 32:
- return 4;
- default:
- printk(KERN_INFO "sgivwfb: unsupported bpp %d\n", bpp);
- return 0;
- }
-}
-
-static unsigned long get_line_length(int xres_virtual, int bpp)
-{
- return (xres_virtual * bytes_per_pixel(bpp));
-}
-
-/*
- * Function: dbe_TurnOffDma
- * Parameters: (None)
- * Description: This should turn off the monitor and dbe. This is used
- * when switching between the serial console and the graphics
- * console.
- */
-
-static void dbe_TurnOffDma(struct sgivw_par *par)
-{
- unsigned int readVal;
- int i;
-
- // Check to see if things are already turned off:
- // 1) Check to see if dbe is not using the internal dotclock.
- // 2) Check to see if the xy counter in dbe is already off.
-
- DBE_GETREG(ctrlstat, readVal);
- if (GET_DBE_FIELD(CTRLSTAT, PCLKSEL, readVal) < 2)
- return;
-
- DBE_GETREG(vt_xy, readVal);
- if (GET_DBE_FIELD(VT_XY, VT_FREEZE, readVal) == 1)
- return;
-
- // Otherwise, turn off dbe
-
- DBE_GETREG(ovr_control, readVal);
- SET_DBE_FIELD(OVR_CONTROL, OVR_DMA_ENABLE, readVal, 0);
- DBE_SETREG(ovr_control, readVal);
- udelay(1000);
- DBE_GETREG(frm_control, readVal);
- SET_DBE_FIELD(FRM_CONTROL, FRM_DMA_ENABLE, readVal, 0);
- DBE_SETREG(frm_control, readVal);
- udelay(1000);
- DBE_GETREG(did_control, readVal);
- SET_DBE_FIELD(DID_CONTROL, DID_DMA_ENABLE, readVal, 0);
- DBE_SETREG(did_control, readVal);
- udelay(1000);
-
- // XXX HACK:
- //
- // This was necessary for GBE--we had to wait through two
- // vertical retrace periods before the pixel DMA was
- // turned off for sure. I've left this in for now, in
- // case dbe needs it.
-
- for (i = 0; i < 10000; i++) {
- DBE_GETREG(frm_inhwctrl, readVal);
- if (GET_DBE_FIELD(FRM_INHWCTRL, FRM_DMA_ENABLE, readVal) ==
- 0)
- udelay(10);
- else {
- DBE_GETREG(ovr_inhwctrl, readVal);
- if (GET_DBE_FIELD
- (OVR_INHWCTRL, OVR_DMA_ENABLE, readVal) == 0)
- udelay(10);
- else {
- DBE_GETREG(did_inhwctrl, readVal);
- if (GET_DBE_FIELD
- (DID_INHWCTRL, DID_DMA_ENABLE,
- readVal) == 0)
- udelay(10);
- else
- break;
- }
- }
- }
-}
-
-/*
- * Set the User Defined Part of the Display. Again if par use it to get
- * real video mode.
- */
-static int sgivwfb_check_var(struct fb_var_screeninfo *var,
- struct fb_info *info)
-{
- struct sgivw_par *par = (struct sgivw_par *)info->par;
- struct dbe_timing_info *timing;
- u_long line_length;
- u_long min_mode;
- int req_dot;
- int test_mode;
-
- /*
- * FB_VMODE_CONUPDATE and FB_VMODE_SMOOTH_XPAN are equal!
- * as FB_VMODE_SMOOTH_XPAN is only used internally
- */
-
- if (var->vmode & FB_VMODE_CONUPDATE) {
- var->vmode |= FB_VMODE_YWRAP;
- var->xoffset = info->var.xoffset;
- var->yoffset = info->var.yoffset;
- }
-
- /* XXX FIXME - forcing var's */
- var->xoffset = 0;
- var->yoffset = 0;
-
- /* Limit bpp to 8, 16, and 32 */
- if (var->bits_per_pixel <= 8)
- var->bits_per_pixel = 8;
- else if (var->bits_per_pixel <= 16)
- var->bits_per_pixel = 16;
- else if (var->bits_per_pixel <= 32)
- var->bits_per_pixel = 32;
- else
- return -EINVAL;
-
- var->grayscale = 0; /* No grayscale for now */
-
- /* determine valid resolution and timing */
- for (min_mode = 0; min_mode < ARRAY_SIZE(dbeVTimings); min_mode++) {
- if (dbeVTimings[min_mode].width >= var->xres &&
- dbeVTimings[min_mode].height >= var->yres)
- break;
- }
-
- if (min_mode == ARRAY_SIZE(dbeVTimings))
- return -EINVAL; /* Resolution to high */
-
- /* XXX FIXME - should try to pick best refresh rate */
- /* for now, pick closest dot-clock within 3MHz */
- req_dot = PICOS2KHZ(var->pixclock);
- printk(KERN_INFO "sgivwfb: requested pixclock=%d ps (%d KHz)\n",
- var->pixclock, req_dot);
- test_mode = min_mode;
- while (dbeVTimings[min_mode].width == dbeVTimings[test_mode].width) {
- if (dbeVTimings[test_mode].cfreq + 3000 > req_dot)
- break;
- test_mode++;
- }
- if (dbeVTimings[min_mode].width != dbeVTimings[test_mode].width)
- test_mode--;
- min_mode = test_mode;
- timing = &dbeVTimings[min_mode];
- printk(KERN_INFO "sgivwfb: granted dot-clock=%d KHz\n", timing->cfreq);
-
- /* Adjust virtual resolution, if necessary */
- if (var->xres > var->xres_virtual || (!ywrap && !ypan))
- var->xres_virtual = var->xres;
- if (var->yres > var->yres_virtual || (!ywrap && !ypan))
- var->yres_virtual = var->yres;
-
- /*
- * Memory limit
- */
- line_length = get_line_length(var->xres_virtual, var->bits_per_pixel);
- if (line_length * var->yres_virtual > sgivwfb_mem_size)
- return -ENOMEM; /* Virtual resolution to high */
-
- info->fix.line_length = line_length;
-
- switch (var->bits_per_pixel) {
- case 8:
- var->red.offset = 0;
- var->red.length = 8;
- var->green.offset = 0;
- var->green.length = 8;
- var->blue.offset = 0;
- var->blue.length = 8;
- var->transp.offset = 0;
- var->transp.length = 0;
- break;
- case 16: /* RGBA 5551 */
- var->red.offset = 11;
- var->red.length = 5;
- var->green.offset = 6;
- var->green.length = 5;
- var->blue.offset = 1;
- var->blue.length = 5;
- var->transp.offset = 0;
- var->transp.length = 0;
- break;
- case 32: /* RGB 8888 */
- var->red.offset = 0;
- var->red.length = 8;
- var->green.offset = 8;
- var->green.length = 8;
- var->blue.offset = 16;
- var->blue.length = 8;
- var->transp.offset = 24;
- var->transp.length = 8;
- break;
- }
- var->red.msb_right = 0;
- var->green.msb_right = 0;
- var->blue.msb_right = 0;
- var->transp.msb_right = 0;
-
- /* set video timing information */
- var->pixclock = KHZ2PICOS(timing->cfreq);
- var->left_margin = timing->htotal - timing->hsync_end;
- var->right_margin = timing->hsync_start - timing->width;
- var->upper_margin = timing->vtotal - timing->vsync_end;
- var->lower_margin = timing->vsync_start - timing->height;
- var->hsync_len = timing->hsync_end - timing->hsync_start;
- var->vsync_len = timing->vsync_end - timing->vsync_start;
-
- /* Ouch. This breaks the rules but timing_num is only important if you
- * change a video mode */
- par->timing_num = min_mode;
-
- printk(KERN_INFO "sgivwfb: new video mode xres=%d yres=%d bpp=%d\n",
- var->xres, var->yres, var->bits_per_pixel);
- printk(KERN_INFO " vxres=%d vyres=%d\n", var->xres_virtual,
- var->yres_virtual);
- return 0;
-}
-
-/*
- * Setup flatpanel related registers.
- */
-static void sgivwfb_setup_flatpanel(struct sgivw_par *par, struct dbe_timing_info *currentTiming)
-{
- int fp_wid, fp_hgt, fp_vbs, fp_vbe;
- u32 outputVal = 0;
-
- SET_DBE_FIELD(VT_FLAGS, HDRV_INVERT, outputVal,
- (currentTiming->flags & FB_SYNC_HOR_HIGH_ACT) ? 0 : 1);
- SET_DBE_FIELD(VT_FLAGS, VDRV_INVERT, outputVal,
- (currentTiming->flags & FB_SYNC_VERT_HIGH_ACT) ? 0 : 1);
- DBE_SETREG(vt_flags, outputVal);
-
- /* Turn on the flat panel */
- switch (flatpanel_id) {
- case FLATPANEL_SGI_1600SW:
- fp_wid = 1600;
- fp_hgt = 1024;
- fp_vbs = 0;
- fp_vbe = 1600;
- currentTiming->pll_m = 4;
- currentTiming->pll_n = 1;
- currentTiming->pll_p = 0;
- break;
- default:
- fp_wid = fp_hgt = fp_vbs = fp_vbe = 0xfff;
- }
-
- outputVal = 0;
- SET_DBE_FIELD(FP_DE, FP_DE_ON, outputVal, fp_vbs);
- SET_DBE_FIELD(FP_DE, FP_DE_OFF, outputVal, fp_vbe);
- DBE_SETREG(fp_de, outputVal);
- outputVal = 0;
- SET_DBE_FIELD(FP_HDRV, FP_HDRV_OFF, outputVal, fp_wid);
- DBE_SETREG(fp_hdrv, outputVal);
- outputVal = 0;
- SET_DBE_FIELD(FP_VDRV, FP_VDRV_ON, outputVal, 1);
- SET_DBE_FIELD(FP_VDRV, FP_VDRV_OFF, outputVal, fp_hgt + 1);
- DBE_SETREG(fp_vdrv, outputVal);
-}
-
-/*
- * Set the hardware according to 'par'.
- */
-static int sgivwfb_set_par(struct fb_info *info)
-{
- struct sgivw_par *par = info->par;
- int i, j, htmp, temp;
- u32 readVal, outputVal;
- int wholeTilesX, maxPixelsPerTileX;
- int frmWrite1, frmWrite2, frmWrite3b;
- struct dbe_timing_info *currentTiming; /* Current Video Timing */
- int xpmax, ypmax; // Monitor resolution
- int bytesPerPixel; // Bytes per pixel
-
- currentTiming = &dbeVTimings[par->timing_num];
- bytesPerPixel = bytes_per_pixel(info->var.bits_per_pixel);
- xpmax = currentTiming->width;
- ypmax = currentTiming->height;
-
- /* dbe_InitGraphicsBase(); */
- /* Turn on dotclock PLL */
- DBE_SETREG(ctrlstat, 0x20000000);
-
- dbe_TurnOffDma(par);
-
- /* dbe_CalculateScreenParams(); */
- maxPixelsPerTileX = 512 / bytesPerPixel;
- wholeTilesX = xpmax / maxPixelsPerTileX;
- if (wholeTilesX * maxPixelsPerTileX < xpmax)
- wholeTilesX++;
-
- printk(KERN_DEBUG "sgivwfb: pixPerTile=%d wholeTilesX=%d\n",
- maxPixelsPerTileX, wholeTilesX);
-
- /* dbe_InitGammaMap(); */
- udelay(10);
-
- for (i = 0; i < 256; i++) {
- DBE_ISETREG(gmap, i, (i << 24) | (i << 16) | (i << 8));
- }
-
- /* dbe_TurnOn(); */
- DBE_GETREG(vt_xy, readVal);
- if (GET_DBE_FIELD(VT_XY, VT_FREEZE, readVal) == 1) {
- DBE_SETREG(vt_xy, 0x00000000);
- udelay(1);
- } else
- dbe_TurnOffDma(par);
-
- /* dbe_Initdbe(); */
- for (i = 0; i < 256; i++) {
- for (j = 0; j < 100; j++) {
- DBE_GETREG(cm_fifo, readVal);
- if (readVal != 0x00000000)
- break;
- else
- udelay(10);
- }
-
- // DBE_ISETREG(cmap, i, 0x00000000);
- DBE_ISETREG(cmap, i, (i << 8) | (i << 16) | (i << 24));
- }
-
- /* dbe_InitFramebuffer(); */
- frmWrite1 = 0;
- SET_DBE_FIELD(FRM_SIZE_TILE, FRM_WIDTH_TILE, frmWrite1,
- wholeTilesX);
- SET_DBE_FIELD(FRM_SIZE_TILE, FRM_RHS, frmWrite1, 0);
-
- switch (bytesPerPixel) {
- case 1:
- SET_DBE_FIELD(FRM_SIZE_TILE, FRM_DEPTH, frmWrite1,
- DBE_FRM_DEPTH_8);
- break;
- case 2:
- SET_DBE_FIELD(FRM_SIZE_TILE, FRM_DEPTH, frmWrite1,
- DBE_FRM_DEPTH_16);
- break;
- case 4:
- SET_DBE_FIELD(FRM_SIZE_TILE, FRM_DEPTH, frmWrite1,
- DBE_FRM_DEPTH_32);
- break;
- }
-
- frmWrite2 = 0;
- SET_DBE_FIELD(FRM_SIZE_PIXEL, FB_HEIGHT_PIX, frmWrite2, ypmax);
-
- // Tell dbe about the framebuffer location and type
- // XXX What format is the FRM_TILE_PTR?? 64K aligned address?
- frmWrite3b = 0;
- SET_DBE_FIELD(FRM_CONTROL, FRM_TILE_PTR, frmWrite3b,
- sgivwfb_mem_phys >> 9);
- SET_DBE_FIELD(FRM_CONTROL, FRM_DMA_ENABLE, frmWrite3b, 1);
- SET_DBE_FIELD(FRM_CONTROL, FRM_LINEAR, frmWrite3b, 1);
-
- /* Initialize DIDs */
-
- outputVal = 0;
- switch (bytesPerPixel) {
- case 1:
- SET_DBE_FIELD(WID, TYP, outputVal, DBE_CMODE_I8);
- break;
- case 2:
- SET_DBE_FIELD(WID, TYP, outputVal, DBE_CMODE_RGBA5);
- break;
- case 4:
- SET_DBE_FIELD(WID, TYP, outputVal, DBE_CMODE_RGB8);
- break;
- }
- SET_DBE_FIELD(WID, BUF, outputVal, DBE_BMODE_BOTH);
-
- for (i = 0; i < 32; i++) {
- DBE_ISETREG(mode_regs, i, outputVal);
- }
-
- /* dbe_InitTiming(); */
- DBE_SETREG(vt_intr01, 0xffffffff);
- DBE_SETREG(vt_intr23, 0xffffffff);
-
- DBE_GETREG(dotclock, readVal);
- DBE_SETREG(dotclock, readVal & 0xffff);
-
- DBE_SETREG(vt_xymax, 0x00000000);
- outputVal = 0;
- SET_DBE_FIELD(VT_VSYNC, VT_VSYNC_ON, outputVal,
- currentTiming->vsync_start);
- SET_DBE_FIELD(VT_VSYNC, VT_VSYNC_OFF, outputVal,
- currentTiming->vsync_end);
- DBE_SETREG(vt_vsync, outputVal);
- outputVal = 0;
- SET_DBE_FIELD(VT_HSYNC, VT_HSYNC_ON, outputVal,
- currentTiming->hsync_start);
- SET_DBE_FIELD(VT_HSYNC, VT_HSYNC_OFF, outputVal,
- currentTiming->hsync_end);
- DBE_SETREG(vt_hsync, outputVal);
- outputVal = 0;
- SET_DBE_FIELD(VT_VBLANK, VT_VBLANK_ON, outputVal,
- currentTiming->vblank_start);
- SET_DBE_FIELD(VT_VBLANK, VT_VBLANK_OFF, outputVal,
- currentTiming->vblank_end);
- DBE_SETREG(vt_vblank, outputVal);
- outputVal = 0;
- SET_DBE_FIELD(VT_HBLANK, VT_HBLANK_ON, outputVal,
- currentTiming->hblank_start);
- SET_DBE_FIELD(VT_HBLANK, VT_HBLANK_OFF, outputVal,
- currentTiming->hblank_end - 3);
- DBE_SETREG(vt_hblank, outputVal);
- outputVal = 0;
- SET_DBE_FIELD(VT_VCMAP, VT_VCMAP_ON, outputVal,
- currentTiming->vblank_start);
- SET_DBE_FIELD(VT_VCMAP, VT_VCMAP_OFF, outputVal,
- currentTiming->vblank_end);
- DBE_SETREG(vt_vcmap, outputVal);
- outputVal = 0;
- SET_DBE_FIELD(VT_HCMAP, VT_HCMAP_ON, outputVal,
- currentTiming->hblank_start);
- SET_DBE_FIELD(VT_HCMAP, VT_HCMAP_OFF, outputVal,
- currentTiming->hblank_end - 3);
- DBE_SETREG(vt_hcmap, outputVal);
-
- if (flatpanel_id != -1)
- sgivwfb_setup_flatpanel(par, currentTiming);
-
- outputVal = 0;
- temp = currentTiming->vblank_start - currentTiming->vblank_end - 1;
- if (temp > 0)
- temp = -temp;
-
- SET_DBE_FIELD(DID_START_XY, DID_STARTY, outputVal, (u32) temp);
- if (currentTiming->hblank_end >= 20)
- SET_DBE_FIELD(DID_START_XY, DID_STARTX, outputVal,
- currentTiming->hblank_end - 20);
- else
- SET_DBE_FIELD(DID_START_XY, DID_STARTX, outputVal,
- currentTiming->htotal - (20 -
- currentTiming->
- hblank_end));
- DBE_SETREG(did_start_xy, outputVal);
-
- outputVal = 0;
- SET_DBE_FIELD(CRS_START_XY, CRS_STARTY, outputVal,
- (u32) (temp + 1));
- if (currentTiming->hblank_end >= DBE_CRS_MAGIC)
- SET_DBE_FIELD(CRS_START_XY, CRS_STARTX, outputVal,
- currentTiming->hblank_end - DBE_CRS_MAGIC);
- else
- SET_DBE_FIELD(CRS_START_XY, CRS_STARTX, outputVal,
- currentTiming->htotal - (DBE_CRS_MAGIC -
- currentTiming->
- hblank_end));
- DBE_SETREG(crs_start_xy, outputVal);
-
- outputVal = 0;
- SET_DBE_FIELD(VC_START_XY, VC_STARTY, outputVal, (u32) temp);
- SET_DBE_FIELD(VC_START_XY, VC_STARTX, outputVal,
- currentTiming->hblank_end - 4);
- DBE_SETREG(vc_start_xy, outputVal);
-
- DBE_SETREG(frm_size_tile, frmWrite1);
- DBE_SETREG(frm_size_pixel, frmWrite2);
-
- outputVal = 0;
- SET_DBE_FIELD(DOTCLK, M, outputVal, currentTiming->pll_m - 1);
- SET_DBE_FIELD(DOTCLK, N, outputVal, currentTiming->pll_n - 1);
- SET_DBE_FIELD(DOTCLK, P, outputVal, currentTiming->pll_p);
- SET_DBE_FIELD(DOTCLK, RUN, outputVal, 1);
- DBE_SETREG(dotclock, outputVal);
-
- udelay(11 * 1000);
-
- DBE_SETREG(vt_vpixen, 0xffffff);
- DBE_SETREG(vt_hpixen, 0xffffff);
-
- outputVal = 0;
- SET_DBE_FIELD(VT_XYMAX, VT_MAXX, outputVal, currentTiming->htotal);
- SET_DBE_FIELD(VT_XYMAX, VT_MAXY, outputVal, currentTiming->vtotal);
- DBE_SETREG(vt_xymax, outputVal);
-
- outputVal = frmWrite1;
- SET_DBE_FIELD(FRM_SIZE_TILE, FRM_FIFO_RESET, outputVal, 1);
- DBE_SETREG(frm_size_tile, outputVal);
- DBE_SETREG(frm_size_tile, frmWrite1);
-
- outputVal = 0;
- SET_DBE_FIELD(OVR_WIDTH_TILE, OVR_FIFO_RESET, outputVal, 1);
- DBE_SETREG(ovr_width_tile, outputVal);
- DBE_SETREG(ovr_width_tile, 0);
-
- DBE_SETREG(frm_control, frmWrite3b);
- DBE_SETREG(did_control, 0);
-
- // Wait for dbe to take frame settings
- for (i = 0; i < 100000; i++) {
- DBE_GETREG(frm_inhwctrl, readVal);
- if (GET_DBE_FIELD(FRM_INHWCTRL, FRM_DMA_ENABLE, readVal) !=
- 0)
- break;
- else
- udelay(1);
- }
-
- if (i == 100000)
- printk(KERN_INFO
- "sgivwfb: timeout waiting for frame DMA enable.\n");
-
- outputVal = 0;
- htmp = currentTiming->hblank_end - 19;
- if (htmp < 0)
- htmp += currentTiming->htotal; /* allow blank to wrap around */
- SET_DBE_FIELD(VT_HPIXEN, VT_HPIXEN_ON, outputVal, htmp);
- SET_DBE_FIELD(VT_HPIXEN, VT_HPIXEN_OFF, outputVal,
- ((htmp + currentTiming->width -
- 2) % currentTiming->htotal));
- DBE_SETREG(vt_hpixen, outputVal);
-
- outputVal = 0;
- SET_DBE_FIELD(VT_VPIXEN, VT_VPIXEN_OFF, outputVal,
- currentTiming->vblank_start);
- SET_DBE_FIELD(VT_VPIXEN, VT_VPIXEN_ON, outputVal,
- currentTiming->vblank_end);
- DBE_SETREG(vt_vpixen, outputVal);
-
- // Turn off mouse cursor
- par->regs->crs_ctl = 0;
-
- // XXX What's this section for??
- DBE_GETREG(ctrlstat, readVal);
- readVal &= 0x02000000;
-
- if (readVal != 0) {
- DBE_SETREG(ctrlstat, 0x30000000);
- }
- return 0;
-}
-
-/*
- * Set a single color register. The values supplied are already
- * rounded down to the hardware's capabilities (according to the
- * entries in the var structure). Return != 0 for invalid regno.
- */
-
-static int sgivwfb_setcolreg(u_int regno, u_int red, u_int green,
- u_int blue, u_int transp,
- struct fb_info *info)
-{
- struct sgivw_par *par = (struct sgivw_par *) info->par;
-
- if (regno > 255)
- return 1;
- red >>= 8;
- green >>= 8;
- blue >>= 8;
-
- /* wait for the color map FIFO to have a free entry */
- while (par->cmap_fifo == 0)
- par->cmap_fifo = par->regs->cm_fifo;
-
- par->regs->cmap[regno] = (red << 24) | (green << 16) | (blue << 8);
- par->cmap_fifo--; /* assume FIFO is filling up */
- return 0;
-}
-
-static int sgivwfb_mmap(struct fb_info *info,
- struct vm_area_struct *vma)
-{
- int r;
-
- pgprot_val(vma->vm_page_prot) =
- pgprot_val(vma->vm_page_prot) | _PAGE_PCD;
-
- r = vm_iomap_memory(vma, sgivwfb_mem_phys, sgivwfb_mem_size);
-
- printk(KERN_DEBUG "sgivwfb: mmap framebuffer P(%lx)->V(%lx)\n",
- sgivwfb_mem_phys + (vma->vm_pgoff << PAGE_SHIFT), vma->vm_start);
-
- return r;
-}
-
-int __init sgivwfb_setup(char *options)
-{
- char *this_opt;
-
- if (!options || !*options)
- return 0;
-
- while ((this_opt = strsep(&options, ",")) != NULL) {
- if (!strncmp(this_opt, "monitor:", 8)) {
- if (!strncmp(this_opt + 8, "crt", 3))
- flatpanel_id = -1;
- else if (!strncmp(this_opt + 8, "1600sw", 6))
- flatpanel_id = FLATPANEL_SGI_1600SW;
- }
- }
- return 0;
-}
-
-/*
- * Initialisation
- */
-static int sgivwfb_probe(struct platform_device *dev)
-{
- struct sgivw_par *par;
- struct fb_info *info;
- char *monitor;
-
- info = framebuffer_alloc(sizeof(struct sgivw_par) + sizeof(u32) * 16, &dev->dev);
- if (!info)
- return -ENOMEM;
- par = info->par;
-
- if (!request_mem_region(DBE_REG_PHYS, DBE_REG_SIZE, "sgivwfb")) {
- printk(KERN_ERR "sgivwfb: couldn't reserve mmio region\n");
- framebuffer_release(info);
- return -EBUSY;
- }
-
- par->regs = (struct asregs *) ioremap_nocache(DBE_REG_PHYS, DBE_REG_SIZE);
- if (!par->regs) {
- printk(KERN_ERR "sgivwfb: couldn't ioremap registers\n");
- goto fail_ioremap_regs;
- }
-
- mtrr_add(sgivwfb_mem_phys, sgivwfb_mem_size, MTRR_TYPE_WRCOMB, 1);
-
- sgivwfb_fix.smem_start = sgivwfb_mem_phys;
- sgivwfb_fix.smem_len = sgivwfb_mem_size;
- sgivwfb_fix.ywrapstep = ywrap;
- sgivwfb_fix.ypanstep = ypan;
-
- info->fix = sgivwfb_fix;
-
- switch (flatpanel_id) {
- case FLATPANEL_SGI_1600SW:
- info->var = sgivwfb_var1600sw;
- monitor = "SGI 1600SW flatpanel";
- break;
- default:
- info->var = sgivwfb_var;
- monitor = "CRT";
- }
-
- printk(KERN_INFO "sgivwfb: %s monitor selected\n", monitor);
-
- info->fbops = &sgivwfb_ops;
- info->pseudo_palette = (void *) (par + 1);
- info->flags = FBINFO_DEFAULT;
-
- info->screen_base = ioremap_nocache((unsigned long) sgivwfb_mem_phys, sgivwfb_mem_size);
- if (!info->screen_base) {
- printk(KERN_ERR "sgivwfb: couldn't ioremap screen_base\n");
- goto fail_ioremap_fbmem;
- }
-
- if (fb_alloc_cmap(&info->cmap, 256, 0) < 0)
- goto fail_color_map;
-
- if (register_framebuffer(info) < 0) {
- printk(KERN_ERR "sgivwfb: couldn't register framebuffer\n");
- goto fail_register_framebuffer;
- }
-
- platform_set_drvdata(dev, info);
-
- fb_info(info, "SGI DBE frame buffer device, using %ldK of video memory at %#lx\n",
- sgivwfb_mem_size >> 10, sgivwfb_mem_phys);
- return 0;
-
-fail_register_framebuffer:
- fb_dealloc_cmap(&info->cmap);
-fail_color_map:
- iounmap((char *) info->screen_base);
-fail_ioremap_fbmem:
- iounmap(par->regs);
-fail_ioremap_regs:
- release_mem_region(DBE_REG_PHYS, DBE_REG_SIZE);
- framebuffer_release(info);
- return -ENXIO;
-}
-
-static int sgivwfb_remove(struct platform_device *dev)
-{
- struct fb_info *info = platform_get_drvdata(dev);
-
- if (info) {
- struct sgivw_par *par = info->par;
-
- unregister_framebuffer(info);
- dbe_TurnOffDma(par);
- iounmap(par->regs);
- iounmap(info->screen_base);
- release_mem_region(DBE_REG_PHYS, DBE_REG_SIZE);
- fb_dealloc_cmap(&info->cmap);
- framebuffer_release(info);
- }
- return 0;
-}
-
-static struct platform_driver sgivwfb_driver = {
- .probe = sgivwfb_probe,
- .remove = sgivwfb_remove,
- .driver = {
- .name = "sgivwfb",
- },
-};
-
-static struct platform_device *sgivwfb_device;
-
-int __init sgivwfb_init(void)
-{
- int ret;
-
-#ifndef MODULE
- char *option = NULL;
-
- if (fb_get_options("sgivwfb", &option))
- return -ENODEV;
- sgivwfb_setup(option);
-#endif
- ret = platform_driver_register(&sgivwfb_driver);
- if (!ret) {
- sgivwfb_device = platform_device_alloc("sgivwfb", 0);
- if (sgivwfb_device) {
- ret = platform_device_add(sgivwfb_device);
- } else
- ret = -ENOMEM;
- if (ret) {
- platform_driver_unregister(&sgivwfb_driver);
- platform_device_put(sgivwfb_device);
- }
- }
- return ret;
-}
-
-module_init(sgivwfb_init);
-
-#ifdef MODULE
-MODULE_LICENSE("GPL");
-
-static void __exit sgivwfb_exit(void)
-{
- platform_device_unregister(sgivwfb_device);
- platform_driver_unregister(&sgivwfb_driver);
-}
-
-module_exit(sgivwfb_exit);
-
-#endif /* MODULE */