diff options
Diffstat (limited to 'drivers/media/video/em28xx')
| -rw-r--r-- | drivers/media/video/em28xx/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/media/video/em28xx/em28xx-cards.c | 49 | ||||
| -rw-r--r-- | drivers/media/video/em28xx/em28xx-core.c | 9 | ||||
| -rw-r--r-- | drivers/media/video/em28xx/em28xx-dvb.c | 160 | ||||
| -rw-r--r-- | drivers/media/video/em28xx/em28xx-i2c.c | 2 | ||||
| -rw-r--r-- | drivers/media/video/em28xx/em28xx-reg.h | 1 | ||||
| -rw-r--r-- | drivers/media/video/em28xx/em28xx.h | 3 |
7 files changed, 171 insertions, 55 deletions
diff --git a/drivers/media/video/em28xx/Kconfig b/drivers/media/video/em28xx/Kconfig index 985100ea17a4..3cb78f26df90 100644 --- a/drivers/media/video/em28xx/Kconfig +++ b/drivers/media/video/em28xx/Kconfig @@ -38,6 +38,8 @@ config VIDEO_EM28XX_DVB select DVB_ZL10353 if !DVB_FE_CUSTOMISE select DVB_TDA10023 if !DVB_FE_CUSTOMISE select DVB_S921 if !DVB_FE_CUSTOMISE + select DVB_DRXD if !DVB_FE_CUSTOMISE + select DVB_CXD2820R if !DVB_FE_CUSTOMISE select VIDEOBUF_DVB ---help--- This adds support for DVB cards based on the diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 69fcea82d01c..4e37375decf5 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -100,6 +100,13 @@ static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = { { -1, -1, -1, -1}, }; +/* Board Hauppauge WinTV HVR 900 (R2) digital */ +static struct em28xx_reg_seq hauppauge_wintv_hvr_900R2_digital[] = { + {EM28XX_R08_GPIO, 0x2e, ~EM_GPIO_4, 10}, + {EM2880_R04_GPO, 0x0c, 0x0f, 10}, + { -1, -1, -1, -1}, +}; + /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */ static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = { {EM28XX_R08_GPIO, 0x69, ~EM_GPIO_4, 10}, @@ -282,6 +289,16 @@ static struct em28xx_reg_seq leadership_reset[] = { { -1, -1, -1, -1}, }; +/* 2013:024f PCTV Systems nanoStick T2 290e + * GPIO_6 - demod reset + * GPIO_7 - LED + */ +static struct em28xx_reg_seq pctv_290e[] = { + {EM2874_R80_GPIO, 0x00, 0xff, 80}, + {EM2874_R80_GPIO, 0x40, 0xff, 80}, /* GPIO_6 = 1 */ + {EM2874_R80_GPIO, 0xc0, 0xff, 80}, /* GPIO_7 = 1 */ + {-1, -1, -1, -1}, +}; /* * Board definitions @@ -859,6 +876,8 @@ struct em28xx_board em28xx_boards[] = { .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .mts_firmware = 1, + .has_dvb = 1, + .dvb_gpio = hauppauge_wintv_hvr_900R2_digital, .ir_codes = RC_MAP_HAUPPAUGE, .decoder = EM28XX_TVP5150, .input = { { @@ -1448,12 +1467,14 @@ struct em28xx_board em28xx_boards[] = { .gpio = pinnacle_hybrid_pro_analog, } }, }, - [EM2882_BOARD_PINNACLE_HYBRID_PRO] = { - .name = "Pinnacle Hybrid Pro (2)", - .valid = EM28XX_BOARD_NOT_VALIDATED, + [EM2882_BOARD_PINNACLE_HYBRID_PRO_330E] = { + .name = "Pinnacle Hybrid Pro (330e)", .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .mts_firmware = 1, + .has_dvb = 1, + .dvb_gpio = hauppauge_wintv_hvr_900R2_digital, + .ir_codes = RC_MAP_PINNACLE_PCTV_HD, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, @@ -1749,6 +1770,17 @@ struct em28xx_board em28xx_boards[] = { .dvb_gpio = kworld_a340_digital, .tuner_gpio = default_tuner_gpio, }, + /* 2013:024f PCTV Systems nanoStick T2 290e. + * Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2 */ + [EM28174_BOARD_PCTV_290E] = { + .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT | + EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ, + .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, + .name = "PCTV Systems nanoStick T2 290e", + .tuner_type = TUNER_ABSENT, + .tuner_gpio = pctv_290e, + .has_dvb = 1, + }, }; const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards); @@ -1863,7 +1895,7 @@ struct usb_device_id em28xx_id_table[] = { { USB_DEVICE(0x2304, 0x021a), .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, { USB_DEVICE(0x2304, 0x0226), - .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO }, + .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO_330E }, { USB_DEVICE(0x2304, 0x0227), .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO }, { USB_DEVICE(0x0413, 0x6023), @@ -1876,6 +1908,8 @@ struct usb_device_id em28xx_id_table[] = { .driver_info = EM2860_BOARD_GADMEI_UTV330 }, { USB_DEVICE(0x1b80, 0xa340), .driver_info = EM2870_BOARD_KWORLD_A340 }, + { USB_DEVICE(0x2013, 0x024f), + .driver_info = EM28174_BOARD_PCTV_290E }, { }, }; MODULE_DEVICE_TABLE(usb, em28xx_id_table); @@ -2229,7 +2263,7 @@ static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl) ctl->demod = XC3028_FE_ZARLINK456; break; case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: - /* djh - Not sure which demod we need here */ + case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E: ctl->demod = XC3028_FE_DEFAULT; break; case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600: @@ -2799,6 +2833,11 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, dev->reg_gpio_num = EM2874_R80_GPIO; dev->wait_after_write = 0; break; + case CHIP_ID_EM28174: + em28xx_info("chip ID is em28174\n"); + dev->reg_gpio_num = EM2874_R80_GPIO; + dev->wait_after_write = 0; + break; case CHIP_ID_EM2883: em28xx_info("chip ID is em2882/em2883\n"); dev->wait_after_write = 0; diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c index 44c63cbd6dda..e33f145d867a 100644 --- a/drivers/media/video/em28xx/em28xx-core.c +++ b/drivers/media/video/em28xx/em28xx-core.c @@ -489,7 +489,8 @@ int em28xx_audio_setup(struct em28xx *dev) int vid1, vid2, feat, cfg; u32 vid; - if (dev->chip_id == CHIP_ID_EM2870 || dev->chip_id == CHIP_ID_EM2874) { + if (dev->chip_id == CHIP_ID_EM2870 || dev->chip_id == CHIP_ID_EM2874 + || dev->chip_id == CHIP_ID_EM28174) { /* Digital only device - don't load any alsa module */ dev->audio_mode.has_audio = 0; dev->has_audio_class = 0; @@ -614,7 +615,7 @@ int em28xx_capture_start(struct em28xx *dev, int start) { int rc; - if (dev->chip_id == CHIP_ID_EM2874) { + if (dev->chip_id == CHIP_ID_EM2874 || dev->chip_id == CHIP_ID_EM28174) { /* The Transport Stream Enable Register moved in em2874 */ if (!start) { rc = em28xx_write_reg_bits(dev, EM2874_R5F_TS_ENABLE, @@ -1111,6 +1112,10 @@ int em28xx_isoc_dvb_max_packetsize(struct em28xx *dev) /* FIXME - for now assume 564 like it was before, but the em2874 code should be added to return the proper value... */ packet_size = 564; + } else if (dev->chip_id == CHIP_ID_EM28174) { + /* FIXME same as em2874. 564 was enough for 22 Mbit DVB-T + but too much for 44 Mbit DVB-C. */ + packet_size = 752; } else { /* TS max packet size stored in bits 1-0 of R01 */ chip_cfg2 = em28xx_read_reg(dev, EM28XX_R01_CHIPCFG2); diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c index c7c04bf712aa..7904ca4b6913 100644 --- a/drivers/media/video/em28xx/em28xx-dvb.c +++ b/drivers/media/video/em28xx/em28xx-dvb.c @@ -38,6 +38,8 @@ #include "tda1002x.h" #include "tda18271.h" #include "s921.h" +#include "drxd.h" +#include "cxd2820r.h" MODULE_DESCRIPTION("driver for em28xx based DVB cards"); MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>"); @@ -58,7 +60,7 @@ if (debug >= level) \ #define EM28XX_DVB_MAX_PACKETS 64 struct em28xx_dvb { - struct dvb_frontend *frontend; + struct dvb_frontend *fe[2]; /* feed count management */ struct mutex lock; @@ -285,12 +287,13 @@ static struct zl10353_config em28xx_zl10353_xc3028_no_i2c_gate = { .if2 = 45600, }; -#ifdef EM28XX_DRX397XD_SUPPORT -/* [TODO] djh - not sure yet what the device config needs to contain */ -static struct drx397xD_config em28xx_drx397xD_with_xc3028 = { - .demod_address = (0xe0 >> 1), +static struct drxd_config em28xx_drxd = { + .index = 0, .demod_address = 0x70, .demod_revision = 0xa2, + .demoda_address = 0x00, .pll_address = 0x00, + .pll_type = DRXD_PLL_NONE, .clock = 12000, .insert_rs_byte = 1, + .pll_set = NULL, .osc_deviation = NULL, .IF = 42800000, + .disable_i2c_gate_ctrl = 1, }; -#endif static int mt352_terratec_xs_init(struct dvb_frontend *fe) { @@ -332,6 +335,26 @@ static struct tda10023_config em28xx_tda10023_config = { .invert = 1, }; +static struct cxd2820r_config em28xx_cxd2820r_config = { + .i2c_address = (0xd8 >> 1), + .ts_mode = CXD2820R_TS_SERIAL, + .if_dvbt_6 = 3300, + .if_dvbt_7 = 3500, + .if_dvbt_8 = 4000, + .if_dvbt2_6 = 3300, + .if_dvbt2_7 = 3500, + .if_dvbt2_8 = 4000, + .if_dvbc = 5000, + + /* enable LNA for DVB-T2 and DVB-C */ + .gpio_dvbt2[0] = CXD2820R_GPIO_E | CXD2820R_GPIO_O | CXD2820R_GPIO_L, + .gpio_dvbc[0] = CXD2820R_GPIO_E | CXD2820R_GPIO_O | CXD2820R_GPIO_L, +}; + +static struct tda18271_config em28xx_cxd2820r_tda18271_config = { + .output_opt = TDA18271_OUTPUT_LT_OFF, +}; + /* ------------------------------------------------------------------ */ static int attach_xc3028(u8 addr, struct em28xx *dev) @@ -343,17 +366,17 @@ static int attach_xc3028(u8 addr, struct em28xx *dev) cfg.i2c_adap = &dev->i2c_adap; cfg.i2c_addr = addr; - if (!dev->dvb->frontend) { + if (!dev->dvb->fe[0]) { em28xx_errdev("/2: dvb frontend not attached. " "Can't attach xc3028\n"); return -EINVAL; } - fe = dvb_attach(xc2028_attach, dev->dvb->frontend, &cfg); + fe = dvb_attach(xc2028_attach, dev->dvb->fe[0], &cfg); if (!fe) { em28xx_errdev("/2: xc3028 attach failed\n"); - dvb_frontend_detach(dev->dvb->frontend); - dev->dvb->frontend = NULL; + dvb_frontend_detach(dev->dvb->fe[0]); + dev->dvb->fe[0] = NULL; return -EINVAL; } @@ -383,16 +406,28 @@ static int register_dvb(struct em28xx_dvb *dvb, } /* Ensure all frontends negotiate bus access */ - dvb->frontend->ops.ts_bus_ctrl = em28xx_dvb_bus_ctrl; + dvb->fe[0]->ops.ts_bus_ctrl = em28xx_dvb_bus_ctrl; + if (dvb->fe[1]) + dvb->fe[1]->ops.ts_bus_ctrl = em28xx_dvb_bus_ctrl; dvb->adapter.priv = dev; /* register frontend */ - result = dvb_register_frontend(&dvb->adapter, dvb->frontend); + result = dvb_register_frontend(&dvb->adapter, dvb->fe[0]); if (result < 0) { printk(KERN_WARNING "%s: dvb_register_frontend failed (errno = %d)\n", dev->name, result); - goto fail_frontend; + goto fail_frontend0; + } + + /* register 2nd frontend */ + if (dvb->fe[1]) { + result = dvb_register_frontend(&dvb->adapter, dvb->fe[1]); + if (result < 0) { + printk(KERN_WARNING "%s: 2nd dvb_register_frontend failed (errno = %d)\n", + dev->name, result); + goto fail_frontend1; + } } /* register demux stuff */ @@ -458,9 +493,14 @@ fail_fe_hw: fail_dmxdev: dvb_dmx_release(&dvb->demux); fail_dmx: - dvb_unregister_frontend(dvb->frontend); -fail_frontend: - dvb_frontend_detach(dvb->frontend); + if (dvb->fe[1]) + dvb_unregister_frontend(dvb->fe[1]); + dvb_unregister_frontend(dvb->fe[0]); +fail_frontend1: + if (dvb->fe[1]) + dvb_frontend_detach(dvb->fe[1]); +fail_frontend0: + dvb_frontend_detach(dvb->fe[0]); dvb_unregister_adapter(&dvb->adapter); fail_adapter: return result; @@ -473,12 +513,15 @@ static void unregister_dvb(struct em28xx_dvb *dvb) dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw); dvb_dmxdev_release(&dvb->dmxdev); dvb_dmx_release(&dvb->demux); - dvb_unregister_frontend(dvb->frontend); - dvb_frontend_detach(dvb->frontend); + if (dvb->fe[1]) + dvb_unregister_frontend(dvb->fe[1]); + dvb_unregister_frontend(dvb->fe[0]); + if (dvb->fe[1]) + dvb_frontend_detach(dvb->fe[1]); + dvb_frontend_detach(dvb->fe[0]); dvb_unregister_adapter(&dvb->adapter); } - static int dvb_init(struct em28xx *dev) { int result = 0; @@ -497,16 +540,17 @@ static int dvb_init(struct em28xx *dev) return -ENOMEM; } dev->dvb = dvb; + dvb->fe[0] = dvb->fe[1] = NULL; mutex_lock(&dev->lock); em28xx_set_mode(dev, EM28XX_DIGITAL_MODE); /* init frontend */ switch (dev->model) { case EM2874_LEADERSHIP_ISDBT: - dvb->frontend = dvb_attach(s921_attach, + dvb->fe[0] = dvb_attach(s921_attach, &sharp_isdbt, &dev->i2c_adap); - if (!dvb->frontend) { + if (!dvb->fe[0]) { result = -EINVAL; goto out_free; } @@ -516,7 +560,7 @@ static int dvb_init(struct em28xx *dev) case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: case EM2880_BOARD_PINNACLE_PCTV_HD_PRO: case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600: - dvb->frontend = dvb_attach(lgdt330x_attach, + dvb->fe[0] = dvb_attach(lgdt330x_attach, &em2880_lgdt3303_dev, &dev->i2c_adap); if (attach_xc3028(0x61, dev) < 0) { @@ -525,7 +569,7 @@ static int dvb_init(struct em28xx *dev) } break; case EM2880_BOARD_KWORLD_DVB_310U: - dvb->frontend = dvb_attach(zl10353_attach, + dvb->fe[0] = dvb_attach(zl10353_attach, &em28xx_zl10353_with_xc3028, &dev->i2c_adap); if (attach_xc3028(0x61, dev) < 0) { @@ -536,7 +580,7 @@ static int dvb_init(struct em28xx *dev) case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: case EM2882_BOARD_TERRATEC_HYBRID_XS: case EM2880_BOARD_EMPIRE_DUAL_TV: - dvb->frontend = dvb_attach(zl10353_attach, + dvb->fe[0] = dvb_attach(zl10353_attach, &em28xx_zl10353_xc3028_no_i2c_gate, &dev->i2c_adap); if (attach_xc3028(0x61, dev) < 0) { @@ -549,13 +593,13 @@ static int dvb_init(struct em28xx *dev) case EM2881_BOARD_PINNACLE_HYBRID_PRO: case EM2882_BOARD_DIKOM_DK300: case EM2882_BOARD_KWORLD_VS_DVBT: - dvb->frontend = dvb_attach(zl10353_attach, + dvb->fe[0] = dvb_attach(zl10353_attach, &em28xx_zl10353_xc3028_no_i2c_gate, &dev->i2c_adap); - if (dvb->frontend == NULL) { + if (dvb->fe[0] == NULL) { /* This board could have either a zl10353 or a mt352. If the chip id isn't for zl10353, try mt352 */ - dvb->frontend = dvb_attach(mt352_attach, + dvb->fe[0] = dvb_attach(mt352_attach, &terratec_xs_mt352_cfg, &dev->i2c_adap); } @@ -567,7 +611,7 @@ static int dvb_init(struct em28xx *dev) break; case EM2883_BOARD_KWORLD_HYBRID_330U: case EM2882_BOARD_EVGA_INDTUBE: - dvb->frontend = dvb_attach(s5h1409_attach, + dvb->fe[0] = dvb_attach(s5h1409_attach, &em28xx_s5h1409_with_xc3028, &dev->i2c_adap); if (attach_xc3028(0x61, dev) < 0) { @@ -576,11 +620,11 @@ static int dvb_init(struct em28xx *dev) } break; case EM2882_BOARD_KWORLD_ATSC_315U: - dvb->frontend = dvb_attach(lgdt330x_attach, + dvb->fe[0] = dvb_attach(lgdt330x_attach, &em2880_lgdt3303_dev, &dev->i2c_adap); - if (dvb->frontend != NULL) { - if (!dvb_attach(simple_tuner_attach, dvb->frontend, + if (dvb->fe[0] != NULL) { + if (!dvb_attach(simple_tuner_attach, dvb->fe[0], &dev->i2c_adap, 0x61, TUNER_THOMSON_DTT761X)) { result = -EINVAL; goto out_free; @@ -588,25 +632,21 @@ static int dvb_init(struct em28xx *dev) } break; case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: -#ifdef EM28XX_DRX397XD_SUPPORT - /* We don't have the config structure properly populated, so - this is commented out for now */ - dvb->frontend = dvb_attach(drx397xD_attach, - &em28xx_drx397xD_with_xc3028, - &dev->i2c_adap); + case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E: + dvb->fe[0] = dvb_attach(drxd_attach, &em28xx_drxd, NULL, + &dev->i2c_adap, &dev->udev->dev); if (attach_xc3028(0x61, dev) < 0) { result = -EINVAL; goto out_free; } break; -#endif case EM2870_BOARD_REDDO_DVB_C_USB_BOX: /* Philips CU1216L NIM (Philips TDA10023 + Infineon TUA6034) */ - dvb->frontend = dvb_attach(tda10023_attach, + dvb->fe[0] = dvb_attach(tda10023_attach, &em28xx_tda10023_config, &dev->i2c_adap, 0x48); - if (dvb->frontend) { - if (!dvb_attach(simple_tuner_attach, dvb->frontend, + if (dvb->fe[0]) { + if (!dvb_attach(simple_tuner_attach, dvb->fe[0], &dev->i2c_adap, 0x60, TUNER_PHILIPS_CU1216L)) { result = -EINVAL; goto out_free; @@ -614,25 +654,53 @@ static int dvb_init(struct em28xx *dev) } break; case EM2870_BOARD_KWORLD_A340: - dvb->frontend = dvb_attach(lgdt3305_attach, + dvb->fe[0] = dvb_attach(lgdt3305_attach, &em2870_lgdt3304_dev, &dev->i2c_adap); - if (dvb->frontend != NULL) - dvb_attach(tda18271_attach, dvb->frontend, 0x60, + if (dvb->fe[0] != NULL) + dvb_attach(tda18271_attach, dvb->fe[0], 0x60, &dev->i2c_adap, &kworld_a340_config); break; + case EM28174_BOARD_PCTV_290E: + /* MFE + * FE 0 = DVB-T/T2 + FE 1 = DVB-C, both sharing same tuner. */ + /* FE 0 */ + dvb->fe[0] = dvb_attach(cxd2820r_attach, + &em28xx_cxd2820r_config, &dev->i2c_adap, NULL); + if (dvb->fe[0]) { + struct i2c_adapter *i2c_tuner; + i2c_tuner = cxd2820r_get_tuner_i2c_adapter(dvb->fe[0]); + /* FE 0 attach tuner */ + if (!dvb_attach(tda18271_attach, dvb->fe[0], 0x60, + i2c_tuner, &em28xx_cxd2820r_tda18271_config)) { + dvb_frontend_detach(dvb->fe[0]); + result = -EINVAL; + goto out_free; + } + /* FE 1. This dvb_attach() cannot fail. */ + dvb->fe[1] = dvb_attach(cxd2820r_attach, NULL, NULL, + dvb->fe[0]); + dvb->fe[1]->id = 1; + /* FE 1 attach tuner */ + if (!dvb_attach(tda18271_attach, dvb->fe[1], 0x60, + i2c_tuner, &em28xx_cxd2820r_tda18271_config)) { + dvb_frontend_detach(dvb->fe[1]); + /* leave FE 0 still active */ + } + } + break; default: em28xx_errdev("/2: The frontend of your DVB/ATSC card" " isn't supported yet\n"); break; } - if (NULL == dvb->frontend) { + if (NULL == dvb->fe[0]) { em28xx_errdev("/2: frontend initialization failed\n"); result = -EINVAL; goto out_free; } /* define general-purpose callback pointer */ - dvb->frontend->callback = em28xx_tuner_callback; + dvb->fe[0]->callback = em28xx_tuner_callback; /* register everything */ result = register_dvb(dvb, THIS_MODULE, dev, &dev->udev->dev); diff --git a/drivers/media/video/em28xx/em28xx-i2c.c b/drivers/media/video/em28xx/em28xx-i2c.c index 71474d31e155..4739fc7e6eb3 100644 --- a/drivers/media/video/em28xx/em28xx-i2c.c +++ b/drivers/media/video/em28xx/em28xx-i2c.c @@ -332,7 +332,7 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned char *eedata, int len) struct em28xx_eeprom *em_eeprom = (void *)eedata; int i, err, size = len, block; - if (dev->chip_id == CHIP_ID_EM2874) { + if (dev->chip_id == CHIP_ID_EM2874 || dev->chip_id == CHIP_ID_EM28174) { /* Empia switched to a 16-bit addressable eeprom in newer devices. While we could certainly write a routine to read the eeprom, there is nothing of use in there that cannot be diff --git a/drivers/media/video/em28xx/em28xx-reg.h b/drivers/media/video/em28xx/em28xx-reg.h index 91e90559642b..e92a28ede434 100644 --- a/drivers/media/video/em28xx/em28xx-reg.h +++ b/drivers/media/video/em28xx/em28xx-reg.h @@ -201,6 +201,7 @@ enum em28xx_chip_id { CHIP_ID_EM2870 = 35, CHIP_ID_EM2883 = 36, CHIP_ID_EM2874 = 65, + CHIP_ID_EM28174 = 113, }; /* diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index 6f2795a3d4b7..3cca33122450 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -97,7 +97,7 @@ #define EM2881_BOARD_PINNACLE_HYBRID_PRO 53 #define EM2882_BOARD_KWORLD_VS_DVBT 54 #define EM2882_BOARD_TERRATEC_HYBRID_XS 55 -#define EM2882_BOARD_PINNACLE_HYBRID_PRO 56 +#define EM2882_BOARD_PINNACLE_HYBRID_PRO_330E 56 #define EM2883_BOARD_KWORLD_HYBRID_330U 57 #define EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU 58 #define EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 60 @@ -118,6 +118,7 @@ #define EM2882_BOARD_DIKOM_DK300 75 #define EM2870_BOARD_KWORLD_A340 76 #define EM2874_LEADERSHIP_ISDBT 77 +#define EM28174_BOARD_PCTV_290E 78 /* Limits minimum and default number of buffers */ |