diff options
Diffstat (limited to 'arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts')
-rw-r--r-- | arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts | 38 |
1 files changed, 38 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts index b8f46e2802fd..251bbab7d707 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts @@ -70,6 +70,21 @@ }; }; + leds { + compatible = "gpio-leds"; + + pwr { + label = "orangepi:green:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + status { + label = "orangepi:red:status"; + gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>; + }; + }; + reg_vcc3v3: vcc3v3 { compatible = "regulator-fixed"; regulator-name = "vcc3v3"; @@ -88,6 +103,10 @@ status = "okay"; }; +&ehci0 { + status = "okay"; +}; + &hdmi { status = "okay"; }; @@ -132,8 +151,27 @@ status = "okay"; }; +&ohci0 { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; + +&usb_otg { + /* + * According to schematics CN1 MicroUSB port can be used to take + * external 5V to power up the board VBUS. On the contrary CN1 MicroUSB + * port cannot provide power externally even if the board is powered + * via GPIO pins. It thus makes sense to force peripheral mode. + */ + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; |