summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/sound/tlv320adcx140.yaml')
-rw-r--r--Documentation/devicetree/bindings/sound/tlv320adcx140.yaml34
1 files changed, 31 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
index 2e6ac5d2ee96..e84d4a20c633 100644
--- a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
+++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
@@ -18,9 +18,9 @@ description: |
microphone bias or supply voltage generation.
Specifications can be found at:
- http://www.ti.com/lit/ds/symlink/tlv320adc3140.pdf
- http://www.ti.com/lit/ds/symlink/tlv320adc5140.pdf
- http://www.ti.com/lit/ds/symlink/tlv320adc6140.pdf
+ https://www.ti.com/lit/ds/symlink/tlv320adc3140.pdf
+ https://www.ti.com/lit/ds/symlink/tlv320adc5140.pdf
+ https://www.ti.com/lit/ds/symlink/tlv320adc6140.pdf
properties:
compatible:
@@ -108,6 +108,32 @@ properties:
maximum: 7
default: [0, 0, 0, 0]
+patternProperties:
+ '^ti,gpo-config-[1-4]$':
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description: |
+ Defines the configuration and output driver for the general purpose
+ output pins (GPO). These values are pairs, the first value is for the
+ configuration type and the second value is for the output drive type.
+ The array is defined as <GPO_CFG GPO_DRV>
+
+ GPO output configuration can be one of the following:
+
+ 0 - (default) disabled
+ 1 - GPOX is configured as a general-purpose output (GPO)
+ 2 - GPOX is configured as a device interrupt output (IRQ)
+ 3 - GPOX is configured as a secondary ASI output (SDOUT2)
+ 4 - GPOX is configured as a PDM clock output (PDMCLK)
+
+ GPO output drive configuration for the GPO pins can be one of the following:
+
+ 0d - (default) Hi-Z output
+ 1d - Drive active low and active high
+ 2d - Drive active low and weak high
+ 3d - Drive active low and Hi-Z
+ 4d - Drive weak low and active high
+ 5d - Drive Hi-Z and active high
+
required:
- compatible
- reg
@@ -124,6 +150,8 @@ examples:
ti,mic-bias-source = <6>;
ti,pdm-edge-select = <0 1 0 1>;
ti,gpi-config = <4 5 6 7>;
+ ti,gpo-config-1 = <0 0>;
+ ti,gpo-config-2 = <0 0>;
reset-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
};
};