summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/ide/Kconfig6
-rw-r--r--drivers/ide/Makefile1
-rw-r--r--drivers/ide/ide-atapi.c70
-rw-r--r--drivers/ide/ide-floppy.c28
-rw-r--r--drivers/ide/ide-tape.c56
-rw-r--r--drivers/scsi/ide-scsi.c30
-rw-r--r--include/linux/ide.h3
7 files changed, 85 insertions, 109 deletions
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 1607536ff5fb..cf707c8f08d4 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -98,6 +98,9 @@ if BLK_DEV_IDE
comment "Please see Documentation/ide/ide.txt for help/info on IDE drives"
+config IDE_ATAPI
+ bool
+
config BLK_DEV_IDE_SATA
bool "Support for SATA (deprecated; conflicts with libata SATA driver)"
default n
@@ -201,6 +204,7 @@ config BLK_DEV_IDECD_VERBOSE_ERRORS
config BLK_DEV_IDETAPE
tristate "Include IDE/ATAPI TAPE support"
+ select IDE_ATAPI
help
If you have an IDE tape drive using the ATAPI protocol, say Y.
ATAPI is a newer protocol used by IDE tape and CD-ROM drives,
@@ -223,6 +227,7 @@ config BLK_DEV_IDETAPE
config BLK_DEV_IDEFLOPPY
tristate "Include IDE/ATAPI FLOPPY support"
+ select IDE_ATAPI
---help---
If you have an IDE floppy drive which uses the ATAPI protocol,
answer Y. ATAPI is a newer protocol used by IDE CD-ROM/tape/floppy
@@ -246,6 +251,7 @@ config BLK_DEV_IDEFLOPPY
config BLK_DEV_IDESCSI
tristate "SCSI emulation support"
depends on SCSI
+ select IDE_ATAPI
---help---
WARNING: ide-scsi is no longer needed for cd writing applications!
The 2.6 kernel supports direct writing to ide-cd, which eliminates
diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
index f94b679b611e..a2b3f84d710d 100644
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -14,6 +14,7 @@ EXTRA_CFLAGS += -Idrivers/ide
ide-core-y += ide.o ide-io.o ide-iops.o ide-lib.o ide-probe.o ide-taskfile.o
# core IDE code
+ide-core-$(CONFIG_IDE_ATAPI) += ide-atapi.o
ide-core-$(CONFIG_BLK_DEV_IDEPCI) += setup-pci.o
ide-core-$(CONFIG_BLK_DEV_IDEDMA) += ide-dma.o
ide-core-$(CONFIG_IDE_PROC_FS) += ide-proc.o
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
new file mode 100644
index 000000000000..25939bc60402
--- /dev/null
+++ b/drivers/ide/ide-atapi.c
@@ -0,0 +1,70 @@
+/*
+ * ATAPI support.
+ */
+
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ide.h>
+
+static u8 ide_wait_ireason(ide_drive_t *drive, u8 ireason)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ int retries = 100;
+
+ while (retries-- && ((ireason & CD) == 0 || (ireason & IO))) {
+ printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing "
+ "a packet command, retrying\n", drive->name);
+ udelay(100);
+ ireason = hwif->INB(hwif->io_ports.nsect_addr);
+ if (retries == 0) {
+ printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing "
+ "a packet command, ignoring\n",
+ drive->name);
+ ireason |= CD;
+ ireason &= ~IO;
+ }
+ }
+
+ return ireason;
+}
+
+ide_startstop_t ide_transfer_pc(ide_drive_t *drive, struct ide_atapi_pc *pc,
+ ide_handler_t *handler, unsigned int timeout,
+ ide_expiry_t *expiry)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ ide_startstop_t startstop;
+ u8 ireason;
+
+ if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) {
+ printk(KERN_ERR "%s: Strange, packet command initiated yet "
+ "DRQ isn't asserted\n", drive->name);
+ return startstop;
+ }
+
+ ireason = hwif->INB(hwif->io_ports.nsect_addr);
+ if (drive->media == ide_tape && !drive->scsi)
+ ireason = ide_wait_ireason(drive, ireason);
+
+ if ((ireason & CD) == 0 || (ireason & IO)) {
+ printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing "
+ "a packet command\n", drive->name);
+ return ide_do_reset(drive);
+ }
+
+ /* Set the interrupt routine */
+ ide_set_handler(drive, handler, timeout, expiry);
+
+ /* Begin DMA, if necessary */
+ if (pc->flags & PC_FLAG_DMA_OK) {
+ pc->flags |= PC_FLAG_DMA_IN_PROGRESS;
+ hwif->dma_ops->dma_start(drive);
+ }
+
+ /* Send the actual packet */
+ if ((pc->flags & PC_FLAG_ZIP_DRIVE) == 0)
+ hwif->output_data(drive, NULL, pc->c, 12);
+
+ return ide_started;
+}
+EXPORT_SYMBOL_GPL(ide_transfer_pc);
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index a7c138dc324c..e7a1025c03c4 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -532,25 +532,11 @@ static int idefloppy_transfer_pc2(ide_drive_t *drive)
static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
idefloppy_floppy_t *floppy = drive->driver_data;
struct ide_atapi_pc *pc = floppy->pc;
ide_expiry_t *expiry;
unsigned int timeout;
- ide_startstop_t startstop;
- u8 ireason;
- if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) {
- printk(KERN_ERR "%s: Strange, packet command initiated yet "
- "DRQ isn't asserted\n", drive->name);
- return startstop;
- }
- ireason = hwif->INB(hwif->io_ports.nsect_addr);
- if ((ireason & CD) == 0 || (ireason & IO)) {
- printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing "
- "a packet command\n", drive->name);
- return ide_do_reset(drive);
- }
/*
* The following delay solves a problem with ATAPI Zip 100 drives
* where the Busy flag was apparently being deasserted before the
@@ -567,19 +553,7 @@ static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive)
expiry = NULL;
}
- ide_set_handler(drive, &idefloppy_pc_intr, timeout, expiry);
-
- /* Begin DMA, if necessary */
- if (pc->flags & PC_FLAG_DMA_OK) {
- pc->flags |= PC_FLAG_DMA_IN_PROGRESS;
- hwif->dma_ops->dma_start(drive);
- }
-
- if ((pc->flags & PC_FLAG_ZIP_DRIVE) == 0)
- /* Send the actual packet */
- hwif->output_data(drive, NULL, floppy->pc->c, 12);
-
- return ide_started;
+ return ide_transfer_pc(drive, pc, idefloppy_pc_intr, timeout, expiry);
}
static void ide_floppy_report_error(idefloppy_floppy_t *floppy,
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 2a362138f973..5adc2c9ae418 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -947,64 +947,12 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
* again, the callback function will be called and then we will handle the next
* request.
*/
-
-static u8 ide_tape_wait_ireason(ide_drive_t *drive, u8 ireason)
-{
- ide_hwif_t *hwif = drive->hwif;
- int retries = 100;
-
- while (retries-- && ((ireason & CD) == 0 || (ireason & IO))) {
- printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing "
- "a packet command, retrying\n", drive->name);
- udelay(100);
- ireason = hwif->INB(hwif->io_ports.nsect_addr);
- if (retries == 0) {
- printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing "
- "a packet command, ignoring\n",
- drive->name);
- ireason |= CD;
- ireason &= ~IO;
- }
- }
-
- return ireason;
-}
-
static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
idetape_tape_t *tape = drive->driver_data;
- struct ide_atapi_pc *pc = tape->pc;
- ide_startstop_t startstop;
- u8 ireason;
-
- if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) {
- printk(KERN_ERR "%s: Strange, packet command initiated yet "
- "DRQ isn't asserted\n", drive->name);
- return startstop;
- }
-
- ireason = hwif->INB(hwif->io_ports.nsect_addr);
- ireason = ide_tape_wait_ireason(drive, ireason);
- if ((ireason & CD) == 0 || (ireason & IO)) {
- printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing "
- "a packet command\n", drive->name);
- return ide_do_reset(drive);
- }
- /* Set the interrupt routine */
- ide_set_handler(drive, &idetape_pc_intr, IDETAPE_WAIT_CMD, NULL);
-
- /* Begin DMA, if necessary */
- if (pc->flags & PC_FLAG_DMA_OK) {
- pc->flags |= PC_FLAG_DMA_IN_PROGRESS;
- hwif->dma_ops->dma_start(drive);
- }
-
- /* Send the actual packet */
- hwif->output_data(drive, NULL, pc->c, 12);
-
- return ide_started;
+ return ide_transfer_pc(drive, tape->pc, idetape_pc_intr,
+ IDETAPE_WAIT_CMD, NULL);
}
static ide_startstop_t idetape_issue_pc(ide_drive_t *drive,
diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c
index c9fdf60c9dcf..d41348f2245e 100644
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -453,36 +453,10 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive)
static ide_startstop_t idescsi_transfer_pc(ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
idescsi_scsi_t *scsi = drive_to_idescsi(drive);
- struct ide_atapi_pc *pc = scsi->pc;
- ide_startstop_t startstop;
- u8 ireason;
-
- if (ide_wait_stat(&startstop,drive,DRQ_STAT,BUSY_STAT,WAIT_READY)) {
- printk(KERN_ERR "%s: Strange, packet command initiated yet "
- "DRQ isn't asserted\n", drive->name);
- return startstop;
- }
- ireason = hwif->INB(hwif->io_ports.nsect_addr);
- if ((ireason & CD) == 0 || (ireason & IO)) {
- printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing "
- "a packet command\n", drive->name);
- return ide_do_reset (drive);
- }
- /* Set the interrupt routine */
- ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry);
-
- if (pc->flags & PC_FLAG_DMA_OK) {
- pc->flags |= PC_FLAG_DMA_IN_PROGRESS;
- hwif->dma_ops->dma_start(drive);
- }
-
- /* Send the actual packet */
- hwif->output_data(drive, NULL, scsi->pc->c, 12);
-
- return ide_started;
+ return ide_transfer_pc(drive, scsi->pc, idescsi_pc_intr,
+ get_timeout(scsi->pc), idescsi_expiry);
}
static inline int idescsi_set_direction(struct ide_atapi_pc *pc)
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 89feaea9e20b..bed3c58798ae 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -967,6 +967,9 @@ extern int drive_is_ready(ide_drive_t *);
void ide_pktcmd_tf_load(ide_drive_t *, u32, u16, u8);
+ide_startstop_t ide_transfer_pc(ide_drive_t *, struct ide_atapi_pc *,
+ ide_handler_t *, unsigned int, ide_expiry_t *);
+
ide_startstop_t do_rw_taskfile(ide_drive_t *, ide_task_t *);
void task_end_request(ide_drive_t *, struct request *, u8);