Merge branch 'merge' into next

Merge my own merge branch to get various fixes from there
and upstream, especially the hvc console tty refcouting fixes
which which testing is quite a bit harder...

63 files changed, 1406 insertions, 1401 deletions

diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 981f2132d128..6e49ec6f3adc 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -817,10 +817,6 @@ static const __u32 acm_tty_speed[] = {
 	2500000, 3000000, 3500000, 4000000
 };
 
-static const __u8 acm_tty_size[] = {
-	5, 6, 7, 8
-};
-
 static void acm_tty_set_termios(struct tty_struct *tty,
 						struct ktermios *termios_old)
 {
@@ -834,7 +830,21 @@ static void acm_tty_set_termios(struct tty_struct *tty,
 	newline.bParityType = termios->c_cflag & PARENB ?
 				(termios->c_cflag & PARODD ? 1 : 2) +
 				(termios->c_cflag & CMSPAR ? 2 : 0) : 0;
-	newline.bDataBits = acm_tty_size[(termios->c_cflag & CSIZE) >> 4];
+	switch (termios->c_cflag & CSIZE) {
+	case CS5:
+		newline.bDataBits = 5;
+		break;
+	case CS6:
+		newline.bDataBits = 6;
+		break;
+	case CS7:
+		newline.bDataBits = 7;
+		break;
+	case CS8:
+	default:
+		newline.bDataBits = 8;
+		break;
+	}
 	/* FIXME: Needs to clear unsupported bits in the termios */
 	acm->clocal = ((termios->c_cflag & CLOCAL) != 0);
 
@@ -1233,7 +1243,7 @@ made_compressed_probe:
 
 		if (usb_endpoint_xfer_int(epwrite))
 			usb_fill_int_urb(snd->urb, usb_dev,
-				usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress),
+				usb_sndintpipe(usb_dev, epwrite->bEndpointAddress),
 				NULL, acm->writesize, acm_write_bulk, snd, epwrite->bInterval);
 		else
 			usb_fill_bulk_urb(snd->urb, usb_dev,
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index e0356cb859b5..b78fbe222b72 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -1348,6 +1348,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
 					ret = -EFAULT;
 					goto error;
 				}
+				uurb->buffer += u;
 			}
 			totlen -= u;
 		}
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index ddd820d25288..6056db7af410 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -367,6 +367,10 @@ static int usb_probe_interface(struct device *dev)
 	intf->condition = USB_INTERFACE_UNBOUND;
 	usb_cancel_queued_reset(intf);
 
+	/* If the LPM disable succeeded, balance the ref counts. */
+	if (!lpm_disable_error)
+		usb_unlocked_enable_lpm(udev);
+
 	/* Unbound interfaces are always runtime-PM-disabled and -suspended */
 	if (driver->supports_autosuspend)
 		pm_runtime_disable(dev);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 673ee4696262..1af04bdeaf0c 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -739,13 +739,16 @@ static void hub_tt_work(struct work_struct *work)
 	int			limit = 100;
 
 	spin_lock_irqsave (&hub->tt.lock, flags);
-	while (--limit && !list_empty (&hub->tt.clear_list)) {
+	while (!list_empty(&hub->tt.clear_list)) {
 		struct list_head	*next;
 		struct usb_tt_clear	*clear;
 		struct usb_device	*hdev = hub->hdev;
 		const struct hc_driver	*drv;
 		int			status;
 
+		if (!hub->quiescing && --limit < 0)
+			break;
+
 		next = hub->tt.clear_list.next;
 		clear = list_entry (next, struct usb_tt_clear, clear_list);
 		list_del (&clear->clear_list);
@@ -1210,7 +1213,7 @@ static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type)
 	if (hub->has_indicators)
 		cancel_delayed_work_sync(&hub->leds);
 	if (hub->tt.hub)
-		cancel_work_sync(&hub->tt.clear_work);
+		flush_work(&hub->tt.clear_work);
 }
 
 /* caller has locked the hub device */
@@ -3241,8 +3244,7 @@ static int usb_req_set_sel(struct usb_device *udev, enum usb3_link_state state)
 			(state == USB3_LPM_U2 &&
 			 (u2_sel > USB3_LPM_MAX_U2_SEL_PEL ||
 			  u2_pel > USB3_LPM_MAX_U2_SEL_PEL))) {
-		dev_dbg(&udev->dev, "Device-initiated %s disabled due "
-				"to long SEL %llu ms or PEL %llu ms\n",
+		dev_dbg(&udev->dev, "Device-initiated %s disabled due to long SEL %llu us or PEL %llu us\n",
 				usb3_lpm_names[state], u1_sel, u1_pel);
 		return -EINVAL;
 	}
@@ -3320,16 +3322,6 @@ static int usb_set_device_initiated_lpm(struct usb_device *udev,
 
 	if (enable) {
 		/*
-		 * First, let the device know about the exit latencies
-		 * associated with the link state we're about to enable.
-		 */
-		ret = usb_req_set_sel(udev, state);
-		if (ret < 0) {
-			dev_warn(&udev->dev, "Set SEL for device-initiated "
-					"%s failed.\n", usb3_lpm_names[state]);
-			return -EBUSY;
-		}
-		/*
 		 * Now send the control transfer to enable device-initiated LPM
 		 * for either U1 or U2.
 		 */
@@ -3414,7 +3406,28 @@ static int usb_set_lpm_timeout(struct usb_device *udev,
 static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev,
 		enum usb3_link_state state)
 {
-	int timeout;
+	int timeout, ret;
+	__u8 u1_mel = udev->bos->ss_cap->bU1devExitLat;
+	__le16 u2_mel = udev->bos->ss_cap->bU2DevExitLat;
+
+	/* If the device says it doesn't have *any* exit latency to come out of
+	 * U1 or U2, it's probably lying.  Assume it doesn't implement that link
+	 * state.
+	 */
+	if ((state == USB3_LPM_U1 && u1_mel == 0) ||
+			(state == USB3_LPM_U2 && u2_mel == 0))
+		return;
+
+	/*
+	 * First, let the device know about the exit latencies
+	 * associated with the link state we're about to enable.
+	 */
+	ret = usb_req_set_sel(udev, state);
+	if (ret < 0) {
+		dev_warn(&udev->dev, "Set SEL for device-initiated %s failed.\n",
+				usb3_lpm_names[state]);
+		return;
+	}
 
 	/* We allow the host controller to set the U1/U2 timeout internally
 	 * first, so that it can change its schedule to account for the
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index b415c0c859d3..c14ebc975ba4 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -409,6 +409,10 @@ static void dwc3_core_exit(struct dwc3 *dwc)
 {
 	dwc3_event_buffers_cleanup(dwc);
 	dwc3_free_event_buffers(dwc);
+
+	usb_phy_shutdown(dwc->usb2_phy);
+	usb_phy_shutdown(dwc->usb3_phy);
+
 }
 
 #define DWC3_ALIGN_MASK		(16 - 1)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index c9e729a4bf65..7b7deddf6a52 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1904,7 +1904,7 @@ static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum)
 	ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, &params);
 	WARN_ON_ONCE(ret);
 	dep->resource_index = 0;
-
+	dep->flags &= ~DWC3_EP_BUSY;
 	udelay(100);
 }
 
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index dfb51a45496c..e0ff51b89529 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -952,6 +952,7 @@ endif
 config USB_G_WEBCAM
 	tristate "USB Webcam Gadget"
 	depends on VIDEO_DEV
+	select USB_LIBCOMPOSITE
 	help
 	  The Webcam Gadget acts as a composite USB Audio and Video Class
 	  device. It provides a userspace API to process UVC control requests
diff --git a/drivers/usb/gadget/lpc32xx_udc.c b/drivers/usb/gadget/lpc32xx_udc.c
index f696fb9b136d..21a9861dabf0 100644
--- a/drivers/usb/gadget/lpc32xx_udc.c
+++ b/drivers/usb/gadget/lpc32xx_udc.c
@@ -2930,10 +2930,10 @@ static void vbus_work(struct work_struct *work)
 
 		/* Get the VBUS status from the transceiver */
 		value = i2c_smbus_read_byte_data(udc->isp1301_i2c_client,
-						 ISP1301_I2C_OTG_CONTROL_2);
+						 ISP1301_I2C_INTERRUPT_SOURCE);
 
 		/* VBUS on or off? */
-		if (value & OTG_B_SESS_VLD)
+		if (value & INT_SESS_VLD)
 			udc->vbus = 1;
 		else
 			udc->vbus = 0;
diff --git a/drivers/usb/gadget/net2272.c b/drivers/usb/gadget/net2272.c
index 43ac7482fa91..c009263a47e3 100644
--- a/drivers/usb/gadget/net2272.c
+++ b/drivers/usb/gadget/net2272.c
@@ -2069,8 +2069,10 @@ static irqreturn_t net2272_irq(int irq, void *_dev)
 #if defined(PLX_PCI_RDK2)
 	/* see if PCI int for us by checking irqstat */
 	intcsr = readl(dev->rdk2.fpga_base_addr + RDK2_IRQSTAT);
-	if (!intcsr & (1 << NET2272_PCI_IRQ))
+	if (!intcsr & (1 << NET2272_PCI_IRQ)) {
+		spin_unlock(&dev->lock);
 		return IRQ_NONE;
+	}
 	/* check dma interrupts */
 #endif
 	/* Platform/devcice interrupt handler */
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 9bfde82078ec..0d2f35ca93f1 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -222,7 +222,7 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
 
 	if (pdata->controller_ver < 0) {
 		dev_warn(hcd->self.controller, "Could not get controller version\n");
-		return;
+		return -ENODEV;
 	}
 
 	portsc = ehci_readl(ehci, &ehci->regs->port_status[port_offset]);
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 8e7eca62f169..9c2717d66730 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -160,7 +160,7 @@ static const struct hc_driver ehci_orion_hc_driver = {
 	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
 };
 
-static void __init
+static void __devinit
 ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
 			     const struct mbus_dram_target_info *dram)
 {
diff --git a/drivers/usb/host/ehci-vt8500.c b/drivers/usb/host/ehci-vt8500.c
index 96722bfebc84..d3c9a3e397b9 100644
--- a/drivers/usb/host/ehci-vt8500.c
+++ b/drivers/usb/host/ehci-vt8500.c
@@ -85,6 +85,8 @@ static const struct hc_driver vt8500_ehci_hc_driver = {
 	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
 };
 
+static u64 vt8500_ehci_dma_mask = DMA_BIT_MASK(32);
+
 static int vt8500_ehci_drv_probe(struct platform_device *pdev)
 {
 	struct usb_hcd *hcd;
@@ -95,6 +97,14 @@ static int vt8500_ehci_drv_probe(struct platform_device *pdev)
 	if (usb_disabled())
 		return -ENODEV;
 
+	/*
+	 * Right now device-tree probed devices don't get dma_mask set.
+	 * Since shared usb code relies on it, set it here for now.
+	 * Once we have dma capability bindings this can go away.
+	 */
+	if (!pdev->dev.dma_mask)
+		pdev->dev.dma_mask = &vt8500_ehci_dma_mask;
+
 	if (pdev->resource[1].flags != IORESOURCE_IRQ) {
 		pr_debug("resource[1] is not IORESOURCE_IRQ");
 		return -ENOMEM;
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 966d1484ee79..39f9e4a9a2d3 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -545,7 +545,14 @@ static const struct dmi_system_id __devinitconst ehci_dmi_nohandoff_table[] = {
 		/*  Pegatron Lucid (Ordissimo AIRIS) */
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "M11JB"),
-			DMI_MATCH(DMI_BIOS_VERSION, "Lucid-GE-133"),
+			DMI_MATCH(DMI_BIOS_VERSION, "Lucid-"),
+		},
+	},
+	{
+		/*  Pegatron Lucid (Ordissimo) */
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "Ordissimo"),
+			DMI_MATCH(DMI_BIOS_VERSION, "Lucid-"),
 		},
 	},
 	{ }
diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c
index e4780491df4a..68ebf20e1519 100644
--- a/drivers/usb/host/uhci-platform.c
+++ b/drivers/usb/host/uhci-platform.c
@@ -60,6 +60,7 @@ static const struct hc_driver uhci_platform_hc_driver = {
 	.hub_control =		uhci_hub_control,
 };
 
+static u64 platform_uhci_dma_mask = DMA_BIT_MASK(32);
 
 static int __devinit uhci_hcd_platform_probe(struct platform_device *pdev)
 {
@@ -71,6 +72,14 @@ static int __devinit uhci_hcd_platform_probe(struct platform_device *pdev)
 	if (usb_disabled())
 		return -ENODEV;
 
+	/*
+	 * Right now device-tree probed devices don't get dma_mask set.
+	 * Since shared usb code relies on it, set it here for now.
+	 * Once we have dma capability bindings this can go away.
+	 */
+	if (!pdev->dev.dma_mask)
+		pdev->dev.dma_mask = &platform_uhci_dma_mask;
+
 	hcd = usb_create_hcd(&uhci_platform_hc_driver, &pdev->dev,
 			pdev->name);
 	if (!hcd)
diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c
index 4b436f5a4171..5f3a7c74aa8d 100644
--- a/drivers/usb/host/xhci-dbg.c
+++ b/drivers/usb/host/xhci-dbg.c
@@ -544,7 +544,6 @@ void xhci_dbg_ctx(struct xhci_hcd *xhci,
 	int i;
 	/* Fields are 32 bits wide, DMA addresses are in bytes */
 	int field_size = 32 / 8;
-	struct xhci_slot_ctx *slot_ctx;
 	dma_addr_t dma = ctx->dma;
 	int csz = HCC_64BYTE_CONTEXT(xhci->hcc_params);
 
@@ -570,7 +569,6 @@ void xhci_dbg_ctx(struct xhci_hcd *xhci,
 			dbg_rsvd64(xhci, (u64 *)ctrl_ctx, dma);
 	}
 
-	slot_ctx = xhci_get_slot_ctx(xhci, ctx);
 	xhci_dbg_slot_ctx(xhci, ctx);
 	xhci_dbg_ep_ctx(xhci, ctx, last_ep);
 }
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index aa90ad4d4fd5..a686cf4905bb 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -151,9 +151,8 @@ static void xhci_usb3_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
 		if (portsc & PORT_DEV_REMOVE)
 			port_removable |= 1 << (i + 1);
 	}
-	memset(&desc->u.ss.DeviceRemovable,
-			(__force __u16) cpu_to_le16(port_removable),
-			sizeof(__u16));
+
+	desc->u.ss.DeviceRemovable = cpu_to_le16(port_removable);
 }
 
 static void xhci_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
@@ -809,11 +808,13 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			temp = xhci_readl(xhci, port_array[wIndex]);
 			xhci_dbg(xhci, "set port power, actual port %d status  = 0x%x\n", wIndex, temp);
 
+			spin_unlock_irqrestore(&xhci->lock, flags);
 			temp = usb_acpi_power_manageable(hcd->self.root_hub,
 					wIndex);
 			if (temp)
 				usb_acpi_set_power_state(hcd->self.root_hub,
 						wIndex, true);
+			spin_lock_irqsave(&xhci->lock, flags);
 			break;
 		case USB_PORT_FEAT_RESET:
 			temp = (temp | PORT_RESET);
@@ -917,11 +918,13 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			xhci_writel(xhci, temp & ~PORT_POWER,
 				port_array[wIndex]);
 
+			spin_unlock_irqrestore(&xhci->lock, flags);
 			temp = usb_acpi_power_manageable(hcd->self.root_hub,
 					wIndex);
 			if (temp)
 				usb_acpi_set_power_state(hcd->self.root_hub,
 						wIndex, false);
+			spin_lock_irqsave(&xhci->lock, flags);
 			break;
 		default:
 			goto error;
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index c6ebb176dc4f..4e1a8946b8d1 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1228,6 +1228,17 @@ static void xhci_cmd_to_noop(struct xhci_hcd *xhci, struct xhci_cd *cur_cd)
 	cur_seg = find_trb_seg(xhci->cmd_ring->first_seg,
 			xhci->cmd_ring->dequeue, &cycle_state);
 
+	if (!cur_seg) {
+		xhci_warn(xhci, "Command ring mismatch, dequeue = %p %llx (dma)\n",
+				xhci->cmd_ring->dequeue,
+				(unsigned long long)
+				xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
+					xhci->cmd_ring->dequeue));
+		xhci_debug_ring(xhci, xhci->cmd_ring);
+		xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring);
+		return;
+	}
+
 	/* find the command trb matched by cd from command ring */
 	for (cmd_trb = xhci->cmd_ring->dequeue;
 			cmd_trb != xhci->cmd_ring->enqueue;
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 8d7fcbbe6ade..c9e419f29b74 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -479,7 +479,8 @@ static bool compliance_mode_recovery_timer_quirk_check(void)
 
 	if (strstr(dmi_product_name, "Z420") ||
 			strstr(dmi_product_name, "Z620") ||
-			strstr(dmi_product_name, "Z820"))
+			strstr(dmi_product_name, "Z820") ||
+			strstr(dmi_product_name, "Z1"))
 		return true;
 
 	return false;
@@ -1626,7 +1627,6 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
 	struct xhci_hcd *xhci;
 	struct xhci_container_ctx *in_ctx, *out_ctx;
 	unsigned int ep_index;
-	struct xhci_ep_ctx *ep_ctx;
 	struct xhci_slot_ctx *slot_ctx;
 	struct xhci_input_control_ctx *ctrl_ctx;
 	u32 added_ctxs;
@@ -1662,7 +1662,6 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
 	out_ctx = virt_dev->out_ctx;
 	ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
 	ep_index = xhci_get_endpoint_index(&ep->desc);
-	ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
 
 	/* If this endpoint is already in use, and the upper layers are trying
 	 * to add it again without dropping it, reject the addition.
@@ -1816,6 +1815,8 @@ static int xhci_evaluate_context_result(struct xhci_hcd *xhci,
 	case COMP_EBADSLT:
 		dev_warn(&udev->dev, "WARN: slot not enabled for"
 				"evaluate context command.\n");
+		ret = -EINVAL;
+		break;
 	case COMP_CTX_STATE:
 		dev_warn(&udev->dev, "WARN: invalid context state for "
 				"evaluate context command.\n");
@@ -4020,7 +4021,7 @@ int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev)
 static unsigned long long xhci_service_interval_to_ns(
 		struct usb_endpoint_descriptor *desc)
 {
-	return (1 << (desc->bInterval - 1)) * 125 * 1000;
+	return (1ULL << (desc->bInterval - 1)) * 125 * 1000;
 }
 
 static u16 xhci_get_timeout_no_hub_lpm(struct usb_device *udev,
@@ -4141,7 +4142,7 @@ static u16 xhci_calculate_intel_u2_timeout(struct usb_device *udev,
 			(xhci_service_interval_to_ns(desc) > timeout_ns))
 		timeout_ns = xhci_service_interval_to_ns(desc);
 
-	u2_del_ns = udev->bos->ss_cap->bU2DevExitLat * 1000;
+	u2_del_ns = le16_to_cpu(udev->bos->ss_cap->bU2DevExitLat) * 1000ULL;
 	if (u2_del_ns > timeout_ns)
 		timeout_ns = u2_del_ns;
 
diff --git a/drivers/usb/misc/ezusb.c b/drivers/usb/misc/ezusb.c
index 4223d761223d..6589268a6515 100644
--- a/drivers/usb/misc/ezusb.c
+++ b/drivers/usb/misc/ezusb.c
@@ -158,3 +158,4 @@ int ezusb_fx2_ihex_firmware_download(struct usb_device *dev,
 }
 EXPORT_SYMBOL_GPL(ezusb_fx2_ihex_firmware_download);
 
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
index 457f25e62c51..c964d6af178b 100644
--- a/drivers/usb/musb/am35x.c
+++ b/drivers/usb/musb/am35x.c
@@ -305,6 +305,12 @@ static irqreturn_t am35x_musb_interrupt(int irq, void *hci)
 		ret = IRQ_HANDLED;
 	}
 
+	/* Drop spurious RX and TX if device is disconnected */
+	if (musb->int_usb & MUSB_INTR_DISCONNECT) {
+		musb->int_tx = 0;
+		musb->int_rx = 0;
+	}
+
 	if (musb->int_tx || musb->int_rx || musb->int_usb)
 		ret |= musb_interrupt(musb);
 
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 444346e1e10d..ff5f112053d2 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -458,11 +458,11 @@ static int __devinit dsps_create_musb_pdev(struct dsps_glue *glue, u8 id)
 	struct platform_device	*musb;
 	struct resource *res;
 	struct resource	resources[2];
-	char res_name[10];
+	char res_name[11];
 	int ret, musbid;
 
 	/* get memory resource */
-	sprintf(res_name, "musb%d", id);
+	snprintf(res_name, sizeof(res_name), "musb%d", id);
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, res_name);
 	if (!res) {
 		dev_err(dev, "%s get mem resource failed\n", res_name);
@@ -473,7 +473,7 @@ static int __devinit dsps_create_musb_pdev(struct dsps_glue *glue, u8 id)
 	resources[0] = *res;
 
 	/* get irq resource */
-	sprintf(res_name, "musb%d-irq", id);
+	snprintf(res_name, sizeof(res_name), "musb%d-irq", id);
 	res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, res_name);
 	if (!res) {
 		dev_err(dev, "%s get irq resource failed\n", res_name);
@@ -530,7 +530,7 @@ static int __devinit dsps_create_musb_pdev(struct dsps_glue *glue, u8 id)
 
 		of_property_read_u32(np, "num-eps", (u32 *)&config->num_eps);
 		of_property_read_u32(np, "ram-bits", (u32 *)&config->ram_bits);
-		sprintf(res_name, "port%d-mode", id);
+		snprintf(res_name, sizeof(res_name), "port%d-mode", id);
 		of_property_read_u32(np, res_name, (u32 *)&pdata->mode);
 		of_property_read_u32(np, "power", (u32 *)&pdata->power);
 		config->multipoint = of_property_read_bool(np, "multipoint");
diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c
index 143c4e9e1be4..c021b202c0f3 100644
--- a/drivers/usb/renesas_usbhs/fifo.c
+++ b/drivers/usb/renesas_usbhs/fifo.c
@@ -795,6 +795,7 @@ static void xfer_work(struct work_struct *work)
 	dev_dbg(dev, "  %s %d (%d/ %d)\n",
 		fifo->name, usbhs_pipe_number(pipe), pkt->length, pkt->zero);
 
+	usbhs_pipe_enable(pipe);
 	usbhsf_dma_start(pipe, fifo);
 	dma_async_issue_pending(chan);
 }
diff --git a/drivers/usb/renesas_usbhs/mod.c b/drivers/usb/renesas_usbhs/mod.c
index 35c5208f3249..61933a90e5bf 100644
--- a/drivers/usb/renesas_usbhs/mod.c
+++ b/drivers/usb/renesas_usbhs/mod.c
@@ -273,9 +273,9 @@ static irqreturn_t usbhs_interrupt(int irq, void *data)
 	usbhs_write(priv, INTSTS0, ~irq_state.intsts0 & INTSTS0_MAGIC);
 	usbhs_write(priv, INTSTS1, ~irq_state.intsts1 & INTSTS1_MAGIC);
 
-	usbhs_write(priv, BRDYSTS, 0);
-	usbhs_write(priv, NRDYSTS, 0);
-	usbhs_write(priv, BEMPSTS, 0);
+	usbhs_write(priv, BRDYSTS, ~irq_state.brdysts);
+	usbhs_write(priv, NRDYSTS, ~irq_state.nrdysts);
+	usbhs_write(priv, BEMPSTS, ~irq_state.bempsts);
 
 	/*
 	 * call irq callback functions
diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c
index 9b69a1323294..069cd765400c 100644
--- a/drivers/usb/renesas_usbhs/mod_host.c
+++ b/drivers/usb/renesas_usbhs/mod_host.c
@@ -334,6 +334,11 @@ static void usbhsh_pipe_detach(struct usbhsh_hpriv *hpriv,
 	struct device *dev = usbhs_priv_to_dev(priv);
 	unsigned long flags;
 
+	if (unlikely(!uep)) {
+		dev_err(dev, "no uep\n");
+		return;
+	}
+
 	/********************  spin lock ********************/
 	usbhs_lock(priv, flags);
 
diff --git a/drivers/usb/renesas_usbhs/pipe.h b/drivers/usb/renesas_usbhs/pipe.h
index 08786c06dcf1..3d80c7b1fd1b 100644
--- a/drivers/usb/renesas_usbhs/pipe.h
+++ b/drivers/usb/renesas_usbhs/pipe.h
@@ -54,7 +54,7 @@ struct usbhs_pipe_info {
  * pipe list
  */
 #define __usbhs_for_each_pipe(start, pos, info, i)	\
-	for (i = start, pos = (info)->pipe;		\
+	for (i = start, pos = (info)->pipe + i;		\
 	     i < (info)->size;				\
 	     i++, pos = (info)->pipe + i)
 
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index cf2522c397d3..bd50a8a41a0f 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -125,9 +125,6 @@ static inline int calc_divisor(int bps)
 
 static int ark3116_attach(struct usb_serial *serial)
 {
-	struct usb_serial_port *port = serial->port[0];
-	struct ark3116_private *priv;
-
 	/* make sure we have our end-points */
 	if ((serial->num_bulk_in == 0) ||
 	    (serial->num_bulk_out == 0) ||
@@ -142,8 +139,15 @@ static int ark3116_attach(struct usb_serial *serial)
 		return -EINVAL;
 	}
 
-	priv = kzalloc(sizeof(struct ark3116_private),
-		       GFP_KERNEL);
+	return 0;
+}
+
+static int ark3116_port_probe(struct usb_serial_port *port)
+{
+	struct usb_serial *serial = port->serial;
+	struct ark3116_private *priv;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
 
@@ -198,18 +202,15 @@ static int ark3116_attach(struct usb_serial *serial)
 	return 0;
 }
 
-static void ark3116_release(struct usb_serial *serial)
+static int ark3116_port_remove(struct usb_serial_port *port)
 {
-	struct usb_serial_port *port = serial->port[0];
 	struct ark3116_private *priv = usb_get_serial_port_data(port);
 
 	/* device is closed, so URBs and DMA should be down */
-
-	usb_set_serial_port_data(port, NULL);
-
 	mutex_destroy(&priv->hw_lock);
-
 	kfree(priv);
+
+	return 0;
 }
 
 static void ark3116_init_termios(struct tty_struct *tty)
@@ -723,7 +724,8 @@ static struct usb_serial_driver ark3116_device = {
 	.id_table =		id_table,
 	.num_ports =		1,
 	.attach =		ark3116_attach,
-	.release =		ark3116_release,
+	.port_probe =		ark3116_port_probe,
+	.port_remove =		ark3116_port_remove,
 	.set_termios =		ark3116_set_termios,
 	.init_termios =		ark3116_init_termios,
 	.ioctl =		ark3116_ioctl,
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index 99449424193f..ea29556f0d72 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -45,8 +45,8 @@
 #define DRIVER_DESC "USB Belkin Serial converter driver"
 
 /* function prototypes for a Belkin USB Serial Adapter F5U103 */
-static int  belkin_sa_startup(struct usb_serial *serial);
-static void belkin_sa_release(struct usb_serial *serial);
+static int belkin_sa_port_probe(struct usb_serial_port *port);
+static int belkin_sa_port_remove(struct usb_serial_port *port);
 static int  belkin_sa_open(struct tty_struct *tty,
 			struct usb_serial_port *port);
 static void belkin_sa_close(struct usb_serial_port *port);
@@ -88,8 +88,8 @@ static struct usb_serial_driver belkin_device = {
 	.break_ctl =		belkin_sa_break_ctl,
 	.tiocmget =		belkin_sa_tiocmget,
 	.tiocmset =		belkin_sa_tiocmset,
-	.attach =		belkin_sa_startup,
-	.release =		belkin_sa_release,
+	.port_probe =		belkin_sa_port_probe,
+	.port_remove =		belkin_sa_port_remove,
 };
 
 static struct usb_serial_driver * const serial_drivers[] = {
@@ -118,17 +118,15 @@ struct belkin_sa_private {
 					    (c), BELKIN_SA_SET_REQUEST_TYPE, \
 					    (v), 0, NULL, 0, WDR_TIMEOUT)
 
-/* do some startup allocations not currently performed by usb_serial_probe() */
-static int belkin_sa_startup(struct usb_serial *serial)
+static int belkin_sa_port_probe(struct usb_serial_port *port)
 {
-	struct usb_device *dev = serial->dev;
+	struct usb_device *dev = port->serial->dev;
 	struct belkin_sa_private *priv;
 
-	/* allocate the private data structure */
 	priv = kmalloc(sizeof(struct belkin_sa_private), GFP_KERNEL);
 	if (!priv)
-		return -1; /* error */
-	/* set initial values for control structures */
+		return -ENOMEM;
+
 	spin_lock_init(&priv->lock);
 	priv->control_state = 0;
 	priv->last_lsr = 0;
@@ -140,18 +138,19 @@ static int belkin_sa_startup(struct usb_serial *serial)
 					le16_to_cpu(dev->descriptor.bcdDevice),
 					priv->bad_flow_control);
 
-	init_waitqueue_head(&serial->port[0]->write_wait);
-	usb_set_serial_port_data(serial->port[0], priv);
+	usb_set_serial_port_data(port, priv);
 
 	return 0;
 }
 
-static void belkin_sa_release(struct usb_serial *serial)
+static int belkin_sa_port_remove(struct usb_serial_port *port)
 {
-	int i;
+	struct belkin_sa_private *priv;
 
-	for (i = 0; i < serial->num_ports; ++i)
-		kfree(usb_get_serial_port_data(serial->port[i]));
+	priv = usb_get_serial_port_data(port);
+	kfree(priv);
+
+	return 0;
 }
 
 static int belkin_sa_open(struct tty_struct *tty,
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index e9c7046ae355..d255f66e708e 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -242,13 +242,11 @@ out:	kfree(buffer);
 	return r;
 }
 
-/* allocate private data */
-static int ch341_attach(struct usb_serial *serial)
+static int ch341_port_probe(struct usb_serial_port *port)
 {
 	struct ch341_private *priv;
 	int r;
 
-	/* private data */
 	priv = kzalloc(sizeof(struct ch341_private), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
@@ -258,17 +256,27 @@ static int ch341_attach(struct usb_serial *serial)
 	priv->baud_rate = DEFAULT_BAUD_RATE;
 	priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR;
 
-	r = ch341_configure(serial->dev, priv);
+	r = ch341_configure(port->serial->dev, priv);
 	if (r < 0)
 		goto error;
 
-	usb_set_serial_port_data(serial->port[0], priv);
+	usb_set_serial_port_data(port, priv);
 	return 0;
 
 error:	kfree(priv);
 	return r;
 }
 
+static int ch341_port_remove(struct usb_serial_port *port)
+{
+	struct ch341_private *priv;
+
+	priv = usb_get_serial_port_data(port);
+	kfree(priv);
+
+	return 0;
+}
+
 static int ch341_carrier_raised(struct usb_serial_port *port)
 {
 	struct ch341_private *priv = usb_get_serial_port_data(port);
@@ -304,7 +312,7 @@ static void ch341_close(struct usb_serial_port *port)
 static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
-	struct ch341_private *priv = usb_get_serial_port_data(serial->port[0]);
+	struct ch341_private *priv = usb_get_serial_port_data(port);
 	int r;
 
 	priv->baud_rate = DEFAULT_BAUD_RATE;
@@ -608,7 +616,8 @@ static struct usb_serial_driver ch341_device = {
 	.tiocmget          = ch341_tiocmget,
 	.tiocmset          = ch341_tiocmset,
 	.read_int_callback = ch341_read_int_callback,
-	.attach            = ch341_attach,
+	.port_probe        = ch341_port_probe,
+	.port_remove       = ch341_port_remove,
 	.reset_resume      = ch341_reset_resume,
 };
 
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 28af5acc3360..eb033fc92a15 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -162,7 +162,7 @@ static const struct usb_device_id id_table[] = {
 
 MODULE_DEVICE_TABLE(usb, id_table);
 
-struct cp210x_port_private {
+struct cp210x_serial_private {
 	__u8			bInterfaceNumber;
 };
 
@@ -276,7 +276,7 @@ static int cp210x_get_config(struct usb_serial_port *port, u8 request,
 		unsigned int *data, int size)
 {
 	struct usb_serial *serial = port->serial;
-	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
+	struct cp210x_serial_private *spriv = usb_get_serial_data(serial);
 	__le32 *buf;
 	int result, i, length;
 
@@ -292,7 +292,7 @@ static int cp210x_get_config(struct usb_serial_port *port, u8 request,
 	/* Issue the request, attempting to read 'size' bytes */
 	result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 				request, REQTYPE_INTERFACE_TO_HOST, 0x0000,
-				port_priv->bInterfaceNumber, buf, size,
+				spriv->bInterfaceNumber, buf, size,
 				USB_CTRL_GET_TIMEOUT);
 
 	/* Convert data into an array of integers */
@@ -323,7 +323,7 @@ static int cp210x_set_config(struct usb_serial_port *port, u8 request,
 		unsigned int *data, int size)
 {
 	struct usb_serial *serial = port->serial;
-	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
+	struct cp210x_serial_private *spriv = usb_get_serial_data(serial);
 	__le32 *buf;
 	int result, i, length;
 
@@ -345,13 +345,13 @@ static int cp210x_set_config(struct usb_serial_port *port, u8 request,
 		result = usb_control_msg(serial->dev,
 				usb_sndctrlpipe(serial->dev, 0),
 				request, REQTYPE_HOST_TO_INTERFACE, 0x0000,
-				port_priv->bInterfaceNumber, buf, size,
+				spriv->bInterfaceNumber, buf, size,
 				USB_CTRL_SET_TIMEOUT);
 	} else {
 		result = usb_control_msg(serial->dev,
 				usb_sndctrlpipe(serial->dev, 0),
 				request, REQTYPE_HOST_TO_INTERFACE, data[0],
-				port_priv->bInterfaceNumber, NULL, 0,
+				spriv->bInterfaceNumber, NULL, 0,
 				USB_CTRL_SET_TIMEOUT);
 	}
 
@@ -845,36 +845,30 @@ static void cp210x_break_ctl (struct tty_struct *tty, int break_state)
 
 static int cp210x_startup(struct usb_serial *serial)
 {
-	struct cp210x_port_private *port_priv;
-	int i;
+	struct usb_host_interface *cur_altsetting;
+	struct cp210x_serial_private *spriv;
 
 	/* cp210x buffers behave strangely unless device is reset */
 	usb_reset_device(serial->dev);
 
-	for (i = 0; i < serial->num_ports; i++) {
-		port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL);
-		if (!port_priv)
-			return -ENOMEM;
+	spriv = kzalloc(sizeof(*spriv), GFP_KERNEL);
+	if (!spriv)
+		return -ENOMEM;
 
-		port_priv->bInterfaceNumber =
-		    serial->interface->cur_altsetting->desc.bInterfaceNumber;
+	cur_altsetting = serial->interface->cur_altsetting;
+	spriv->bInterfaceNumber = cur_altsetting->desc.bInterfaceNumber;
 
-		usb_set_serial_port_data(serial->port[i], port_priv);
-	}
+	usb_set_serial_data(serial, spriv);
 
 	return 0;
 }
 
 static void cp210x_release(struct usb_serial *serial)
 {
-	struct cp210x_port_private *port_priv;
-	int i;
+	struct cp210x_serial_private *spriv;
 
-	for (i = 0; i < serial->num_ports; i++) {
-		port_priv = usb_get_serial_port_data(serial->port[i]);
-		kfree(port_priv);
-		usb_set_serial_port_data(serial->port[i], NULL);
-	}
+	spriv = usb_get_serial_data(serial);
+	kfree(spriv);
 }
 
 module_usb_serial_driver(serial_drivers, id_table);
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index 2a7aecc72237..4ee77dcbe690 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -55,9 +55,9 @@
 #define CYBERJACK_PRODUCT_ID	0x0100
 
 /* Function prototypes */
-static int cyberjack_startup(struct usb_serial *serial);
 static void cyberjack_disconnect(struct usb_serial *serial);
-static void cyberjack_release(struct usb_serial *serial);
+static int cyberjack_port_probe(struct usb_serial_port *port);
+static int cyberjack_port_remove(struct usb_serial_port *port);
 static int  cyberjack_open(struct tty_struct *tty,
 	struct usb_serial_port *port);
 static void cyberjack_close(struct usb_serial_port *port);
@@ -83,9 +83,9 @@ static struct usb_serial_driver cyberjack_device = {
 	.description =		"Reiner SCT Cyberjack USB card reader",
 	.id_table =		id_table,
 	.num_ports =		1,
-	.attach =		cyberjack_startup,
 	.disconnect =		cyberjack_disconnect,
-	.release =		cyberjack_release,
+	.port_probe =		cyberjack_port_probe,
+	.port_remove =		cyberjack_port_remove,
 	.open =			cyberjack_open,
 	.close =		cyberjack_close,
 	.write =		cyberjack_write,
@@ -107,56 +107,45 @@ struct cyberjack_private {
 	short		wrsent;		/* Data already sent */
 };
 
-/* do some startup allocations not currently performed by usb_serial_probe() */
-static int cyberjack_startup(struct usb_serial *serial)
+static int cyberjack_port_probe(struct usb_serial_port *port)
 {
 	struct cyberjack_private *priv;
-	int i;
+	int result;
 
-	/* allocate the private data structure */
 	priv = kmalloc(sizeof(struct cyberjack_private), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
 
-	/* set initial values */
 	spin_lock_init(&priv->lock);
 	priv->rdtodo = 0;
 	priv->wrfilled = 0;
 	priv->wrsent = 0;
-	usb_set_serial_port_data(serial->port[0], priv);
 
-	init_waitqueue_head(&serial->port[0]->write_wait);
+	usb_set_serial_port_data(port, priv);
 
-	for (i = 0; i < serial->num_ports; ++i) {
-		int result;
-		result = usb_submit_urb(serial->port[i]->interrupt_in_urb,
-					GFP_KERNEL);
-		if (result)
-			dev_err(&serial->dev->dev,
-				"usb_submit_urb(read int) failed\n");
-		dev_dbg(&serial->dev->dev, "%s - usb_submit_urb(int urb)\n",
-			__func__);
-	}
+	result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+	if (result)
+		dev_err(&port->dev, "usb_submit_urb(read int) failed\n");
 
 	return 0;
 }
 
-static void cyberjack_disconnect(struct usb_serial *serial)
+static int cyberjack_port_remove(struct usb_serial_port *port)
 {
-	int i;
+	struct cyberjack_private *priv;
 
-	for (i = 0; i < serial->num_ports; ++i)
-		usb_kill_urb(serial->port[i]->interrupt_in_urb);
+	priv = usb_get_serial_port_data(port);
+	kfree(priv);
+
+	return 0;
 }
 
-static void cyberjack_release(struct usb_serial *serial)
+static void cyberjack_disconnect(struct usb_serial *serial)
 {
 	int i;
 
-	for (i = 0; i < serial->num_ports; ++i) {
-		/* My special items, the standard routines free my urbs */
-		kfree(usb_get_serial_port_data(serial->port[i]));
-	}
+	for (i = 0; i < serial->num_ports; ++i)
+		usb_kill_urb(serial->port[i]->interrupt_in_urb);
 }
 
 static int  cyberjack_open(struct tty_struct *tty,
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 1befce21e173..f0da1279c114 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -123,10 +123,10 @@ struct cypress_private {
 };
 
 /* function prototypes for the Cypress USB to serial device */
-static int  cypress_earthmate_startup(struct usb_serial *serial);
-static int  cypress_hidcom_startup(struct usb_serial *serial);
-static int  cypress_ca42v2_startup(struct usb_serial *serial);
-static void cypress_release(struct usb_serial *serial);
+static int  cypress_earthmate_port_probe(struct usb_serial_port *port);
+static int  cypress_hidcom_port_probe(struct usb_serial_port *port);
+static int  cypress_ca42v2_port_probe(struct usb_serial_port *port);
+static int  cypress_port_remove(struct usb_serial_port *port);
 static int  cypress_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void cypress_close(struct usb_serial_port *port);
 static void cypress_dtr_rts(struct usb_serial_port *port, int on);
@@ -156,8 +156,8 @@ static struct usb_serial_driver cypress_earthmate_device = {
 	.description =			"DeLorme Earthmate USB",
 	.id_table =			id_table_earthmate,
 	.num_ports =			1,
-	.attach =			cypress_earthmate_startup,
-	.release =			cypress_release,
+	.port_probe =			cypress_earthmate_port_probe,
+	.port_remove =			cypress_port_remove,
 	.open =				cypress_open,
 	.close =			cypress_close,
 	.dtr_rts =			cypress_dtr_rts,
@@ -182,8 +182,8 @@ static struct usb_serial_driver cypress_hidcom_device = {
 	.description =			"HID->COM RS232 Adapter",
 	.id_table =			id_table_cyphidcomrs232,
 	.num_ports =			1,
-	.attach =			cypress_hidcom_startup,
-	.release =			cypress_release,
+	.port_probe =			cypress_hidcom_port_probe,
+	.port_remove =			cypress_port_remove,
 	.open =				cypress_open,
 	.close =			cypress_close,
 	.dtr_rts =			cypress_dtr_rts,
@@ -208,8 +208,8 @@ static struct usb_serial_driver cypress_ca42v2_device = {
 	.description =			"Nokia CA-42 V2 Adapter",
 	.id_table =			id_table_nokiaca42v2,
 	.num_ports =			1,
-	.attach =			cypress_ca42v2_startup,
-	.release =			cypress_release,
+	.port_probe =			cypress_ca42v2_port_probe,
+	.port_remove =			cypress_port_remove,
 	.open =				cypress_open,
 	.close =			cypress_close,
 	.dtr_rts =			cypress_dtr_rts,
@@ -438,10 +438,10 @@ static void cypress_set_dead(struct usb_serial_port *port)
  *****************************************************************************/
 
 
-static int generic_startup(struct usb_serial *serial)
+static int cypress_generic_port_probe(struct usb_serial_port *port)
 {
+	struct usb_serial *serial = port->serial;
 	struct cypress_private *priv;
-	struct usb_serial_port *port = serial->port[0];
 
 	priv = kzalloc(sizeof(struct cypress_private), GFP_KERNEL);
 	if (!priv)
@@ -490,14 +490,16 @@ static int generic_startup(struct usb_serial *serial)
 }
 
 
-static int cypress_earthmate_startup(struct usb_serial *serial)
+static int cypress_earthmate_port_probe(struct usb_serial_port *port)
 {
+	struct usb_serial *serial = port->serial;
 	struct cypress_private *priv;
-	struct usb_serial_port *port = serial->port[0];
+	int ret;
 
-	if (generic_startup(serial)) {
+	ret = cypress_generic_port_probe(port);
+	if (ret) {
 		dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__);
-		return 1;
+		return ret;
 	}
 
 	priv = usb_get_serial_port_data(port);
@@ -518,56 +520,53 @@ static int cypress_earthmate_startup(struct usb_serial *serial)
 	}
 
 	return 0;
-} /* cypress_earthmate_startup */
-
+}
 
-static int cypress_hidcom_startup(struct usb_serial *serial)
+static int cypress_hidcom_port_probe(struct usb_serial_port *port)
 {
 	struct cypress_private *priv;
-	struct usb_serial_port *port = serial->port[0];
+	int ret;
 
-	if (generic_startup(serial)) {
+	ret = cypress_generic_port_probe(port);
+	if (ret) {
 		dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__);
-		return 1;
+		return ret;
 	}
 
 	priv = usb_get_serial_port_data(port);
 	priv->chiptype = CT_CYPHIDCOM;
 
 	return 0;
-} /* cypress_hidcom_startup */
-
+}
 
-static int cypress_ca42v2_startup(struct usb_serial *serial)
+static int cypress_ca42v2_port_probe(struct usb_serial_port *port)
 {
 	struct cypress_private *priv;
-	struct usb_serial_port *port = serial->port[0];
+	int ret;
 
-	if (generic_startup(serial)) {
+	ret = cypress_generic_port_probe(port);
+	if (ret) {
 		dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__);
-		return 1;
+		return ret;
 	}
 
 	priv = usb_get_serial_port_data(port);
 	priv->chiptype = CT_CA42V2;
 
 	return 0;
-} /* cypress_ca42v2_startup */
-
+}
 
-static void cypress_release(struct usb_serial *serial)
+static int cypress_port_remove(struct usb_serial_port *port)
 {
 	struct cypress_private *priv;
 
-	/* all open ports are closed at this point */
-	priv = usb_get_serial_port_data(serial->port[0]);
+	priv = usb_get_serial_port_data(port);
 
-	if (priv) {
-		kfifo_free(&priv->write_fifo);
-		kfree(priv);
-	}
-}
+	kfifo_free(&priv->write_fifo);
+	kfree(priv);
 
+	return 0;
+}
 
 static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index c86f68c6b078..b50fa1c6d885 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -244,6 +244,8 @@ static int digi_startup_device(struct usb_serial *serial);
 static int digi_startup(struct usb_serial *serial);
 static void digi_disconnect(struct usb_serial *serial);
 static void digi_release(struct usb_serial *serial);
+static int digi_port_probe(struct usb_serial_port *port);
+static int digi_port_remove(struct usb_serial_port *port);
 static void digi_read_bulk_callback(struct urb *urb);
 static int digi_read_inb_callback(struct urb *urb);
 static int digi_read_oob_callback(struct urb *urb);
@@ -294,6 +296,8 @@ static struct usb_serial_driver digi_acceleport_2_device = {
 	.attach =			digi_startup,
 	.disconnect =			digi_disconnect,
 	.release =			digi_release,
+	.port_probe =			digi_port_probe,
+	.port_remove =			digi_port_remove,
 };
 
 static struct usb_serial_driver digi_acceleport_4_device = {
@@ -320,6 +324,8 @@ static struct usb_serial_driver digi_acceleport_4_device = {
 	.attach =			digi_startup,
 	.disconnect =			digi_disconnect,
 	.release =			digi_release,
+	.port_probe =			digi_port_probe,
+	.port_remove =			digi_port_remove,
 };
 
 static struct usb_serial_driver * const serial_drivers[] = {
@@ -1240,59 +1246,50 @@ static int digi_startup_device(struct usb_serial *serial)
 	return ret;
 }
 
-
-static int digi_startup(struct usb_serial *serial)
+static int digi_port_init(struct usb_serial_port *port, unsigned port_num)
 {
-
-	int i;
 	struct digi_port *priv;
-	struct digi_serial *serial_priv;
 
-	/* allocate the private data structures for all ports */
-	/* number of regular ports + 1 for the out-of-band port */
-	for (i = 0; i < serial->type->num_ports + 1; i++) {
-		/* allocate port private structure */
-		priv = kmalloc(sizeof(struct digi_port), GFP_KERNEL);
-		if (priv == NULL) {
-			while (--i >= 0)
-				kfree(usb_get_serial_port_data(serial->port[i]));
-			return 1;			/* error */
-		}
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
 
-		/* initialize port private structure */
-		spin_lock_init(&priv->dp_port_lock);
-		priv->dp_port_num = i;
-		priv->dp_out_buf_len = 0;
-		priv->dp_write_urb_in_use = 0;
-		priv->dp_modem_signals = 0;
-		init_waitqueue_head(&priv->dp_modem_change_wait);
-		priv->dp_transmit_idle = 0;
-		init_waitqueue_head(&priv->dp_transmit_idle_wait);
-		priv->dp_throttled = 0;
-		priv->dp_throttle_restart = 0;
-		init_waitqueue_head(&priv->dp_flush_wait);
-		init_waitqueue_head(&priv->dp_close_wait);
-		INIT_WORK(&priv->dp_wakeup_work, digi_wakeup_write_lock);
-		priv->dp_port = serial->port[i];
-		/* initialize write wait queue for this port */
-		init_waitqueue_head(&serial->port[i]->write_wait);
-
-		usb_set_serial_port_data(serial->port[i], priv);
-	}
+	spin_lock_init(&priv->dp_port_lock);
+	priv->dp_port_num = port_num;
+	init_waitqueue_head(&priv->dp_modem_change_wait);
+	init_waitqueue_head(&priv->dp_transmit_idle_wait);
+	init_waitqueue_head(&priv->dp_flush_wait);
+	init_waitqueue_head(&priv->dp_close_wait);
+	INIT_WORK(&priv->dp_wakeup_work, digi_wakeup_write_lock);
+	priv->dp_port = port;
 
-	/* allocate serial private structure */
-	serial_priv = kmalloc(sizeof(struct digi_serial), GFP_KERNEL);
-	if (serial_priv == NULL) {
-		for (i = 0; i < serial->type->num_ports + 1; i++)
-			kfree(usb_get_serial_port_data(serial->port[i]));
-		return 1;			/* error */
-	}
+	init_waitqueue_head(&port->write_wait);
+
+	usb_set_serial_port_data(port, priv);
+
+	return 0;
+}
+
+static int digi_startup(struct usb_serial *serial)
+{
+	struct digi_serial *serial_priv;
+	int ret;
+
+	serial_priv = kzalloc(sizeof(*serial_priv), GFP_KERNEL);
+	if (!serial_priv)
+		return -ENOMEM;
 
-	/* initialize serial private structure */
 	spin_lock_init(&serial_priv->ds_serial_lock);
 	serial_priv->ds_oob_port_num = serial->type->num_ports;
 	serial_priv->ds_oob_port = serial->port[serial_priv->ds_oob_port_num];
-	serial_priv->ds_device_started = 0;
+
+	ret = digi_port_init(serial_priv->ds_oob_port,
+						serial_priv->ds_oob_port_num);
+	if (ret) {
+		kfree(serial_priv);
+		return ret;
+	}
+
 	usb_set_serial_data(serial, serial_priv);
 
 	return 0;
@@ -1313,15 +1310,35 @@ static void digi_disconnect(struct usb_serial *serial)
 
 static void digi_release(struct usb_serial *serial)
 {
-	int i;
+	struct digi_serial *serial_priv;
+	struct digi_port *priv;
+
+	serial_priv = usb_get_serial_data(serial);
+
+	priv = usb_get_serial_port_data(serial_priv->ds_oob_port);
+	kfree(priv);
 
-	/* free the private data structures for all ports */
-	/* number of regular ports + 1 for the out-of-band port */
-	for (i = 0; i < serial->type->num_ports + 1; i++)
-		kfree(usb_get_serial_port_data(serial->port[i]));
-	kfree(usb_get_serial_data(serial));
+	kfree(serial_priv);
 }
 
+static int digi_port_probe(struct usb_serial_port *port)
+{
+	unsigned port_num;
+
+	port_num = port->number - port->serial->minor;
+
+	return digi_port_init(port, port_num);
+}
+
+static int digi_port_remove(struct usb_serial_port *port)
+{
+	struct digi_port *priv;
+
+	priv = usb_get_serial_port_data(port);
+	kfree(priv);
+
+	return 0;
+}
 
 static void digi_read_bulk_callback(struct urb *urb)
 {
diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index 244477107e2f..6e4eb57d0177 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -318,39 +318,30 @@ static int f81232_ioctl(struct tty_struct *tty,
 	return -ENOIOCTLCMD;
 }
 
-static int f81232_startup(struct usb_serial *serial)
+static int f81232_port_probe(struct usb_serial_port *port)
 {
 	struct f81232_private *priv;
-	int i;
 
-	for (i = 0; i < serial->num_ports; ++i) {
-		priv = kzalloc(sizeof(struct f81232_private), GFP_KERNEL);
-		if (!priv)
-			goto cleanup;
-		spin_lock_init(&priv->lock);
-		init_waitqueue_head(&priv->delta_msr_wait);
-		usb_set_serial_port_data(serial->port[i], priv);
-	}
-	return 0;
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
 
-cleanup:
-	for (--i; i >= 0; --i) {
-		priv = usb_get_serial_port_data(serial->port[i]);
-		kfree(priv);
-		usb_set_serial_port_data(serial->port[i], NULL);
-	}
-	return -ENOMEM;
+	spin_lock_init(&priv->lock);
+	init_waitqueue_head(&priv->delta_msr_wait);
+
+	usb_set_serial_port_data(port, priv);
+
+	return 0;
 }
 
-static void f81232_release(struct usb_serial *serial)
+static int f81232_port_remove(struct usb_serial_port *port)
 {
-	int i;
 	struct f81232_private *priv;
 
-	for (i = 0; i < serial->num_ports; ++i) {
-		priv = usb_get_serial_port_data(serial->port[i]);
-		kfree(priv);
-	}
+	priv = usb_get_serial_port_data(port);
+	kfree(priv);
+
+	return 0;
 }
 
 static struct usb_serial_driver f81232_device = {
@@ -373,8 +364,8 @@ static struct usb_serial_driver f81232_device = {
 	.tiocmset =		f81232_tiocmset,
 	.process_read_urb =	f81232_process_read_urb,
 	.read_int_callback =	f81232_read_int_callback,
-	.attach =		f81232_startup,
-	.release =		f81232_release,
+	.port_probe =		f81232_port_probe,
+	.port_remove =		f81232_port_remove,
 };
 
 static struct usb_serial_driver * const serial_drivers[] = {
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 3ee92648c02d..203358d7e7bc 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -1405,11 +1405,10 @@ static void timeout_handler(unsigned long data)
 
 
 
-static int garmin_attach(struct usb_serial *serial)
+static int garmin_port_probe(struct usb_serial_port *port)
 {
-	int status = 0;
-	struct usb_serial_port *port = serial->port[0];
-	struct garmin_data *garmin_data_p = NULL;
+	int status;
+	struct garmin_data *garmin_data_p;
 
 	garmin_data_p = kzalloc(sizeof(struct garmin_data), GFP_KERNEL);
 	if (garmin_data_p == NULL) {
@@ -1434,22 +1433,14 @@ static int garmin_attach(struct usb_serial *serial)
 }
 
 
-static void garmin_disconnect(struct usb_serial *serial)
+static int garmin_port_remove(struct usb_serial_port *port)
 {
-	struct usb_serial_port *port = serial->port[0];
 	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
 
 	usb_kill_urb(port->interrupt_in_urb);
 	del_timer_sync(&garmin_data_p->timer);
-}
-
-
-static void garmin_release(struct usb_serial *serial)
-{
-	struct usb_serial_port *port = serial->port[0];
-	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
-
 	kfree(garmin_data_p);
+	return 0;
 }
 
 
@@ -1466,9 +1457,8 @@ static struct usb_serial_driver garmin_device = {
 	.close               = garmin_close,
 	.throttle            = garmin_throttle,
 	.unthrottle          = garmin_unthrottle,
-	.attach              = garmin_attach,
-	.disconnect          = garmin_disconnect,
-	.release             = garmin_release,
+	.port_probe		= garmin_port_probe,
+	.port_remove		= garmin_port_remove,
 	.write               = garmin_write,
 	.write_room          = garmin_write_room,
 	.write_bulk_callback = garmin_write_bulk_callback,
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 8e6faaf3580c..5acc0d13864a 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -225,6 +225,8 @@ static int  edge_get_icount(struct tty_struct *tty,
 static int  edge_startup(struct usb_serial *serial);
 static void edge_disconnect(struct usb_serial *serial);
 static void edge_release(struct usb_serial *serial);
+static int edge_port_probe(struct usb_serial_port *port);
+static int edge_port_remove(struct usb_serial_port *port);
 
 #include "io_tables.h"	/* all of the devices that this driver supports */
 
@@ -2875,10 +2877,9 @@ static void load_application_firmware(struct edgeport_serial *edge_serial)
 static int edge_startup(struct usb_serial *serial)
 {
 	struct edgeport_serial *edge_serial;
-	struct edgeport_port *edge_port;
 	struct usb_device *dev;
 	struct device *ddev = &serial->dev->dev;
-	int i, j;
+	int i;
 	int response;
 	bool interrupt_in_found;
 	bool bulk_in_found;
@@ -2961,25 +2962,6 @@ static int edge_startup(struct usb_serial *serial)
 	/* we set up the pointers to the endpoints in the edge_open function,
 	 * as the structures aren't created yet. */
 
-	/* set up our port private structures */
-	for (i = 0; i < serial->num_ports; ++i) {
-		edge_port = kzalloc(sizeof(struct edgeport_port), GFP_KERNEL);
-		if (edge_port == NULL) {
-			dev_err(ddev, "%s - Out of memory\n", __func__);
-			for (j = 0; j < i; ++j) {
-				kfree(usb_get_serial_port_data(serial->port[j]));
-				usb_set_serial_port_data(serial->port[j],
-									NULL);
-			}
-			usb_set_serial_data(serial, NULL);
-			kfree(edge_serial);
-			return -ENOMEM;
-		}
-		spin_lock_init(&edge_port->ep_lock);
-		edge_port->port = serial->port[i];
-		usb_set_serial_port_data(serial->port[i], edge_port);
-	}
-
 	response = 0;
 
 	if (edge_serial->is_epic) {
@@ -3120,14 +3102,36 @@ static void edge_disconnect(struct usb_serial *serial)
 static void edge_release(struct usb_serial *serial)
 {
 	struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
-	int i;
-
-	for (i = 0; i < serial->num_ports; ++i)
-		kfree(usb_get_serial_port_data(serial->port[i]));
 
 	kfree(edge_serial);
 }
 
+static int edge_port_probe(struct usb_serial_port *port)
+{
+	struct edgeport_port *edge_port;
+
+	edge_port = kzalloc(sizeof(*edge_port), GFP_KERNEL);
+	if (!edge_port)
+		return -ENOMEM;
+
+	spin_lock_init(&edge_port->ep_lock);
+	edge_port->port = port;
+
+	usb_set_serial_port_data(port, edge_port);
+
+	return 0;
+}
+
+static int edge_port_remove(struct usb_serial_port *port)
+{
+	struct edgeport_port *edge_port;
+
+	edge_port = usb_get_serial_port_data(port);
+	kfree(edge_port);
+
+	return 0;
+}
+
 module_usb_serial_driver(serial_drivers, id_table_combined);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h
index 350afddb55ba..1511dd0ad324 100644
--- a/drivers/usb/serial/io_tables.h
+++ b/drivers/usb/serial/io_tables.h
@@ -110,6 +110,8 @@ static struct usb_serial_driver edgeport_2port_device = {
 	.attach			= edge_startup,
 	.disconnect		= edge_disconnect,
 	.release		= edge_release,
+	.port_probe		= edge_port_probe,
+	.port_remove		= edge_port_remove,
 	.ioctl			= edge_ioctl,
 	.set_termios		= edge_set_termios,
 	.tiocmget		= edge_tiocmget,
@@ -139,6 +141,8 @@ static struct usb_serial_driver edgeport_4port_device = {
 	.attach			= edge_startup,
 	.disconnect		= edge_disconnect,
 	.release		= edge_release,
+	.port_probe		= edge_port_probe,
+	.port_remove		= edge_port_remove,
 	.ioctl			= edge_ioctl,
 	.set_termios		= edge_set_termios,
 	.tiocmget		= edge_tiocmget,
@@ -168,6 +172,8 @@ static struct usb_serial_driver edgeport_8port_device = {
 	.attach			= edge_startup,
 	.disconnect		= edge_disconnect,
 	.release		= edge_release,
+	.port_probe		= edge_port_probe,
+	.port_remove		= edge_port_remove,
 	.ioctl			= edge_ioctl,
 	.set_termios		= edge_set_termios,
 	.tiocmget		= edge_tiocmget,
@@ -197,6 +203,8 @@ static struct usb_serial_driver epic_device = {
 	.attach			= edge_startup,
 	.disconnect		= edge_disconnect,
 	.release		= edge_release,
+	.port_probe		= edge_port_probe,
+	.port_remove		= edge_port_remove,
 	.ioctl			= edge_ioctl,
 	.set_termios		= edge_set_termios,
 	.tiocmget		= edge_tiocmget,
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index a2209cd45093..60023c2d2a31 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -2532,12 +2532,7 @@ static void edge_break(struct tty_struct *tty, int break_state)
 static int edge_startup(struct usb_serial *serial)
 {
 	struct edgeport_serial *edge_serial;
-	struct edgeport_port *edge_port;
-	struct usb_device *dev;
 	int status;
-	int i;
-
-	dev = serial->dev;
 
 	/* create our private serial structure */
 	edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL);
@@ -2555,40 +2550,7 @@ static int edge_startup(struct usb_serial *serial)
 		return status;
 	}
 
-	/* set up our port private structures */
-	for (i = 0; i < serial->num_ports; ++i) {
-		edge_port = kzalloc(sizeof(struct edgeport_port), GFP_KERNEL);
-		if (edge_port == NULL) {
-			dev_err(&serial->dev->dev, "%s - Out of memory\n",
-								__func__);
-			goto cleanup;
-		}
-		spin_lock_init(&edge_port->ep_lock);
-		if (kfifo_alloc(&edge_port->write_fifo, EDGE_OUT_BUF_SIZE,
-								GFP_KERNEL)) {
-			dev_err(&serial->dev->dev, "%s - Out of memory\n",
-								__func__);
-			kfree(edge_port);
-			goto cleanup;
-		}
-		edge_port->port = serial->port[i];
-		edge_port->edge_serial = edge_serial;
-		usb_set_serial_port_data(serial->port[i], edge_port);
-		edge_port->bUartMode = default_uart_mode;
-	}
-
 	return 0;
-
-cleanup:
-	for (--i; i >= 0; --i) {
-		edge_port = usb_get_serial_port_data(serial->port[i]);
-		kfifo_free(&edge_port->write_fifo);
-		kfree(edge_port);
-		usb_set_serial_port_data(serial->port[i], NULL);
-	}
-	kfree(edge_serial);
-	usb_set_serial_data(serial, NULL);
-	return -ENOMEM;
 }
 
 static void edge_disconnect(struct usb_serial *serial)
@@ -2597,17 +2559,54 @@ static void edge_disconnect(struct usb_serial *serial)
 
 static void edge_release(struct usb_serial *serial)
 {
-	int i;
+	kfree(usb_get_serial_data(serial));
+}
+
+static int edge_port_probe(struct usb_serial_port *port)
+{
 	struct edgeport_port *edge_port;
+	int ret;
 
-	for (i = 0; i < serial->num_ports; ++i) {
-		edge_port = usb_get_serial_port_data(serial->port[i]);
+	edge_port = kzalloc(sizeof(*edge_port), GFP_KERNEL);
+	if (!edge_port)
+		return -ENOMEM;
+
+	ret = kfifo_alloc(&edge_port->write_fifo, EDGE_OUT_BUF_SIZE,
+								GFP_KERNEL);
+	if (ret) {
+		kfree(edge_port);
+		return -ENOMEM;
+	}
+
+	spin_lock_init(&edge_port->ep_lock);
+	edge_port->port = port;
+	edge_port->edge_serial = usb_get_serial_data(port->serial);
+	edge_port->bUartMode = default_uart_mode;
+
+	usb_set_serial_port_data(port, edge_port);
+
+	ret = edge_create_sysfs_attrs(port);
+	if (ret) {
 		kfifo_free(&edge_port->write_fifo);
 		kfree(edge_port);
+		return ret;
 	}
-	kfree(usb_get_serial_data(serial));
+
+	return 0;
 }
 
+static int edge_port_remove(struct usb_serial_port *port)
+{
+	struct edgeport_port *edge_port;
+
+	edge_port = usb_get_serial_port_data(port);
+
+	edge_remove_sysfs_attrs(port);
+	kfifo_free(&edge_port->write_fifo);
+	kfree(edge_port);
+
+	return 0;
+}
 
 /* Sysfs Attributes */
 
@@ -2667,8 +2666,8 @@ static struct usb_serial_driver edgeport_1port_device = {
 	.attach			= edge_startup,
 	.disconnect		= edge_disconnect,
 	.release		= edge_release,
-	.port_probe		= edge_create_sysfs_attrs,
-	.port_remove		= edge_remove_sysfs_attrs,
+	.port_probe		= edge_port_probe,
+	.port_remove		= edge_port_remove,
 	.ioctl			= edge_ioctl,
 	.set_termios		= edge_set_termios,
 	.tiocmget		= edge_tiocmget,
@@ -2698,8 +2697,8 @@ static struct usb_serial_driver edgeport_2port_device = {
 	.attach			= edge_startup,
 	.disconnect		= edge_disconnect,
 	.release		= edge_release,
-	.port_probe		= edge_create_sysfs_attrs,
-	.port_remove		= edge_remove_sysfs_attrs,
+	.port_probe		= edge_port_probe,
+	.port_remove		= edge_port_remove,
 	.ioctl			= edge_ioctl,
 	.set_termios		= edge_set_termios,
 	.tiocmget		= edge_tiocmget,
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index 20a132ec39e2..4264821a3b34 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -203,8 +203,7 @@ static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port)
 	return 0;
 }
 
-/* fake probe - only to allocate data structures */
-static int ipw_probe(struct usb_serial *serial, const struct usb_device_id *id)
+static int ipw_attach(struct usb_serial *serial)
 {
 	struct usb_wwan_intf_private *data;
 
@@ -303,9 +302,9 @@ static struct usb_serial_driver ipw_device = {
 	.num_ports =		1,
 	.open =			ipw_open,
 	.close =		ipw_close,
-	.probe =		ipw_probe,
-	.attach =		usb_wwan_startup,
+	.attach =		ipw_attach,
 	.release =		ipw_release,
+	.port_probe =		usb_wwan_port_probe,
 	.port_remove =		usb_wwan_port_remove,
 	.dtr_rts =		ipw_dtr_rts,
 	.write =		usb_wwan_write,
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 01da3ea36e89..cd5533e81de7 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -53,6 +53,8 @@ static int iuu_cardout;
 static bool xmas;
 static int vcc_default = 5;
 
+static int iuu_create_sysfs_attrs(struct usb_serial_port *port);
+static int iuu_remove_sysfs_attrs(struct usb_serial_port *port);
 static void read_rxcmd_callback(struct urb *urb);
 
 struct iuu_private {
@@ -72,63 +74,55 @@ struct iuu_private {
 	u32 clk;
 };
 
-
-static void iuu_free_buf(struct iuu_private *priv)
-{
-	kfree(priv->buf);
-	kfree(priv->writebuf);
-}
-
-static int iuu_alloc_buf(struct usb_serial *serial, struct iuu_private *priv)
-{
-	priv->buf = kzalloc(256, GFP_KERNEL);
-	priv->writebuf = kzalloc(256, GFP_KERNEL);
-	if (!priv->buf || !priv->writebuf) {
-		iuu_free_buf(priv);
-		dev_dbg(&serial->dev->dev, "%s problem allocation buffer\n", __func__);
-		return -ENOMEM;
-	}
-	dev_dbg(&serial->dev->dev, "%s - Privates buffers allocation success\n", __func__);
-	return 0;
-}
-
-static int iuu_startup(struct usb_serial *serial)
+static int iuu_port_probe(struct usb_serial_port *port)
 {
 	struct iuu_private *priv;
+	int ret;
 
 	priv = kzalloc(sizeof(struct iuu_private), GFP_KERNEL);
-	dev_dbg(&serial->dev->dev, "%s- priv allocation success\n", __func__);
 	if (!priv)
 		return -ENOMEM;
-	if (iuu_alloc_buf(serial, priv)) {
+
+	priv->buf = kzalloc(256, GFP_KERNEL);
+	if (!priv->buf) {
+		kfree(priv);
+		return -ENOMEM;
+	}
+
+	priv->writebuf = kzalloc(256, GFP_KERNEL);
+	if (!priv->writebuf) {
+		kfree(priv->buf);
 		kfree(priv);
 		return -ENOMEM;
 	}
+
 	priv->vcc = vcc_default;
 	spin_lock_init(&priv->lock);
 	init_waitqueue_head(&priv->delta_msr_wait);
-	usb_set_serial_port_data(serial->port[0], priv);
+
+	usb_set_serial_port_data(port, priv);
+
+	ret = iuu_create_sysfs_attrs(port);
+	if (ret) {
+		kfree(priv->writebuf);
+		kfree(priv->buf);
+		kfree(priv);
+		return ret;
+	}
+
 	return 0;
 }
 
-/* Release function */
-static void iuu_release(struct usb_serial *serial)
+static int iuu_port_remove(struct usb_serial_port *port)
 {
-	struct usb_serial_port *port = serial->port[0];
 	struct iuu_private *priv = usb_get_serial_port_data(port);
-	if (!port)
-		return;
 
-	if (priv) {
-		iuu_free_buf(priv);
-		dev_dbg(&port->dev, "%s - I will free all\n", __func__);
-		usb_set_serial_port_data(port, NULL);
-
-		dev_dbg(&port->dev, "%s - priv is not anymore in port structure\n", __func__);
-		kfree(priv);
+	iuu_remove_sysfs_attrs(port);
+	kfree(priv->writebuf);
+	kfree(priv->buf);
+	kfree(priv);
 
-		dev_dbg(&port->dev, "%s priv is now kfree\n", __func__);
-	}
+	return 0;
 }
 
 static int iuu_tiocmset(struct tty_struct *tty,
@@ -1215,8 +1209,6 @@ static struct usb_serial_driver iuu_device = {
 	.num_ports = 1,
 	.bulk_in_size = 512,
 	.bulk_out_size = 512,
-	.port_probe = iuu_create_sysfs_attrs,
-	.port_remove = iuu_remove_sysfs_attrs,
 	.open = iuu_open,
 	.close = iuu_close,
 	.write = iuu_uart_write,
@@ -1225,8 +1217,8 @@ static struct usb_serial_driver iuu_device = {
 	.tiocmset = iuu_tiocmset,
 	.set_termios = iuu_set_termios,
 	.init_termios = iuu_init_termios,
-	.attach = iuu_startup,
-	.release = iuu_release,
+	.port_probe = iuu_port_probe,
+	.port_remove = iuu_port_remove,
 };
 
 static struct usb_serial_driver * const serial_drivers[] = {
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 29c943d737d0..7179b0c5f814 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -1374,13 +1374,9 @@ static struct callbacks {
 	   data in device_details */
 static void keyspan_setup_urbs(struct usb_serial *serial)
 {
-	int				i, j;
 	struct keyspan_serial_private 	*s_priv;
 	const struct keyspan_device_details	*d_details;
-	struct usb_serial_port		*port;
-	struct keyspan_port_private	*p_priv;
 	struct callbacks		*cback;
-	int				endp;
 
 	s_priv = usb_get_serial_data(serial);
 	d_details = s_priv->device_details;
@@ -1404,45 +1400,6 @@ static void keyspan_setup_urbs(struct usb_serial *serial)
 		(serial, d_details->glocont_endpoint, USB_DIR_OUT,
 		 serial, s_priv->glocont_buf, GLOCONT_BUFLEN,
 		 cback->glocont_callback);
-
-	/* Setup endpoints for each port specific thing */
-	for (i = 0; i < d_details->num_ports; i++) {
-		port = serial->port[i];
-		p_priv = usb_get_serial_port_data(port);
-
-		/* Do indat endpoints first, once for each flip */
-		endp = d_details->indat_endpoints[i];
-		for (j = 0; j <= d_details->indat_endp_flip; ++j, ++endp) {
-			p_priv->in_urbs[j] = keyspan_setup_urb
-				(serial, endp, USB_DIR_IN, port,
-				 p_priv->in_buffer[j], 64,
-				 cback->indat_callback);
-		}
-		for (; j < 2; ++j)
-			p_priv->in_urbs[j] = NULL;
-
-		/* outdat endpoints also have flip */
-		endp = d_details->outdat_endpoints[i];
-		for (j = 0; j <= d_details->outdat_endp_flip; ++j, ++endp) {
-			p_priv->out_urbs[j] = keyspan_setup_urb
-				(serial, endp, USB_DIR_OUT, port,
-				 p_priv->out_buffer[j], 64,
-				 cback->outdat_callback);
-		}
-		for (; j < 2; ++j)
-			p_priv->out_urbs[j] = NULL;
-
-		/* inack endpoint */
-		p_priv->inack_urb = keyspan_setup_urb
-			(serial, d_details->inack_endpoints[i], USB_DIR_IN,
-			 port, p_priv->inack_buffer, 1, cback->inack_callback);
-
-		/* outcont endpoint */
-		p_priv->outcont_urb = keyspan_setup_urb
-			(serial, d_details->outcont_endpoints[i], USB_DIR_OUT,
-			 port, p_priv->outcont_buffer, 64,
-			 cback->outcont_callback);
-	}
 }
 
 /* usa19 function doesn't require prescaler */
@@ -2407,9 +2364,7 @@ static void keyspan_send_setup(struct usb_serial_port *port, int reset_port)
 static int keyspan_startup(struct usb_serial *serial)
 {
 	int				i, err;
-	struct usb_serial_port		*port;
 	struct keyspan_serial_private 	*s_priv;
-	struct keyspan_port_private	*p_priv;
 	const struct keyspan_device_details	*d_details;
 
 	for (i = 0; (d_details = keyspan_devices[i]) != NULL; ++i)
@@ -2432,19 +2387,6 @@ static int keyspan_startup(struct usb_serial *serial)
 	s_priv->device_details = d_details;
 	usb_set_serial_data(serial, s_priv);
 
-	/* Now setup per port private data */
-	for (i = 0; i < serial->num_ports; i++) {
-		port = serial->port[i];
-		p_priv = kzalloc(sizeof(struct keyspan_port_private),
-								GFP_KERNEL);
-		if (!p_priv) {
-			dev_dbg(&port->dev, "%s - kmalloc for keyspan_port_private (%d) failed!.\n", __func__, i);
-			return 1;
-		}
-		p_priv->device_details = d_details;
-		usb_set_serial_port_data(port, p_priv);
-	}
-
 	keyspan_setup_urbs(serial);
 
 	if (s_priv->instat_urb != NULL) {
@@ -2463,59 +2405,112 @@ static int keyspan_startup(struct usb_serial *serial)
 
 static void keyspan_disconnect(struct usb_serial *serial)
 {
-	int				i, j;
-	struct usb_serial_port		*port;
-	struct keyspan_serial_private 	*s_priv;
-	struct keyspan_port_private	*p_priv;
+	struct keyspan_serial_private *s_priv;
 
 	s_priv = usb_get_serial_data(serial);
 
-	/* Stop reading/writing urbs */
 	stop_urb(s_priv->instat_urb);
 	stop_urb(s_priv->glocont_urb);
 	stop_urb(s_priv->indat_urb);
-	for (i = 0; i < serial->num_ports; ++i) {
-		port = serial->port[i];
-		p_priv = usb_get_serial_port_data(port);
-		stop_urb(p_priv->inack_urb);
-		stop_urb(p_priv->outcont_urb);
-		for (j = 0; j < 2; j++) {
-			stop_urb(p_priv->in_urbs[j]);
-			stop_urb(p_priv->out_urbs[j]);
-		}
-	}
+}
+
+static void keyspan_release(struct usb_serial *serial)
+{
+	struct keyspan_serial_private *s_priv;
+
+	s_priv = usb_get_serial_data(serial);
 
-	/* Now free them */
 	usb_free_urb(s_priv->instat_urb);
 	usb_free_urb(s_priv->indat_urb);
 	usb_free_urb(s_priv->glocont_urb);
-	for (i = 0; i < serial->num_ports; ++i) {
-		port = serial->port[i];
-		p_priv = usb_get_serial_port_data(port);
-		usb_free_urb(p_priv->inack_urb);
-		usb_free_urb(p_priv->outcont_urb);
-		for (j = 0; j < 2; j++) {
-			usb_free_urb(p_priv->in_urbs[j]);
-			usb_free_urb(p_priv->out_urbs[j]);
-		}
-	}
+
+	kfree(s_priv);
 }
 
-static void keyspan_release(struct usb_serial *serial)
+static int keyspan_port_probe(struct usb_serial_port *port)
 {
-	int				i;
-	struct usb_serial_port		*port;
-	struct keyspan_serial_private 	*s_priv;
+	struct usb_serial *serial = port->serial;
+	struct keyspan_port_private *s_priv;
+	struct keyspan_port_private *p_priv;
+	const struct keyspan_device_details *d_details;
+	struct callbacks *cback;
+	int endp;
+	int port_num;
+	int i;
 
 	s_priv = usb_get_serial_data(serial);
+	d_details = s_priv->device_details;
 
-	kfree(s_priv);
+	p_priv = kzalloc(sizeof(*p_priv), GFP_KERNEL);
+	if (!p_priv)
+		return -ENOMEM;
 
-	/* Now free per port private data */
-	for (i = 0; i < serial->num_ports; i++) {
-		port = serial->port[i];
-		kfree(usb_get_serial_port_data(port));
+	s_priv = usb_get_serial_data(port->serial);
+	p_priv->device_details = d_details;
+
+	/* Setup values for the various callback routines */
+	cback = &keyspan_callbacks[d_details->msg_format];
+
+	port_num = port->number - port->serial->minor;
+
+	/* Do indat endpoints first, once for each flip */
+	endp = d_details->indat_endpoints[port_num];
+	for (i = 0; i <= d_details->indat_endp_flip; ++i, ++endp) {
+		p_priv->in_urbs[i] = keyspan_setup_urb(serial, endp,
+						USB_DIR_IN, port,
+						p_priv->in_buffer[i], 64,
+						cback->indat_callback);
+	}
+	/* outdat endpoints also have flip */
+	endp = d_details->outdat_endpoints[port_num];
+	for (i = 0; i <= d_details->outdat_endp_flip; ++i, ++endp) {
+		p_priv->out_urbs[i] = keyspan_setup_urb(serial, endp,
+						USB_DIR_OUT, port,
+						p_priv->out_buffer[i], 64,
+						cback->outdat_callback);
+	}
+	/* inack endpoint */
+	p_priv->inack_urb = keyspan_setup_urb(serial,
+					d_details->inack_endpoints[port_num],
+					USB_DIR_IN, port,
+					p_priv->inack_buffer, 1,
+					cback->inack_callback);
+	/* outcont endpoint */
+	p_priv->outcont_urb = keyspan_setup_urb(serial,
+					d_details->outcont_endpoints[port_num],
+					USB_DIR_OUT, port,
+					p_priv->outcont_buffer, 64,
+					 cback->outcont_callback);
+
+	usb_set_serial_port_data(port, p_priv);
+
+	return 0;
+}
+
+static int keyspan_port_remove(struct usb_serial_port *port)
+{
+	struct keyspan_port_private *p_priv;
+	int i;
+
+	p_priv = usb_get_serial_port_data(port);
+
+	stop_urb(p_priv->inack_urb);
+	stop_urb(p_priv->outcont_urb);
+	for (i = 0; i < 2; i++) {
+		stop_urb(p_priv->in_urbs[i]);
+		stop_urb(p_priv->out_urbs[i]);
+	}
+
+	usb_free_urb(p_priv->inack_urb);
+	usb_free_urb(p_priv->outcont_urb);
+	for (i = 0; i < 2; i++) {
+		usb_free_urb(p_priv->in_urbs[i]);
+		usb_free_urb(p_priv->out_urbs[i]);
 	}
+
+	kfree(p_priv);
+
+	return 0;
 }
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
index 0a8a40b5711e..0273dda303a4 100644
--- a/drivers/usb/serial/keyspan.h
+++ b/drivers/usb/serial/keyspan.h
@@ -42,6 +42,8 @@ static void keyspan_dtr_rts		(struct usb_serial_port *port, int on);
 static int  keyspan_startup		(struct usb_serial *serial);
 static void keyspan_disconnect		(struct usb_serial *serial);
 static void keyspan_release		(struct usb_serial *serial);
+static int keyspan_port_probe(struct usb_serial_port *port);
+static int keyspan_port_remove(struct usb_serial_port *port);
 static int  keyspan_write_room		(struct tty_struct *tty);
 
 static int  keyspan_write		(struct tty_struct *tty,
@@ -567,6 +569,8 @@ static struct usb_serial_driver keyspan_1port_device = {
 	.attach			= keyspan_startup,
 	.disconnect		= keyspan_disconnect,
 	.release		= keyspan_release,
+	.port_probe		= keyspan_port_probe,
+	.port_remove		= keyspan_port_remove,
 };
 
 static struct usb_serial_driver keyspan_2port_device = {
@@ -589,6 +593,8 @@ static struct usb_serial_driver keyspan_2port_device = {
 	.attach			= keyspan_startup,
 	.disconnect		= keyspan_disconnect,
 	.release		= keyspan_release,
+	.port_probe		= keyspan_port_probe,
+	.port_remove		= keyspan_port_remove,
 };
 
 static struct usb_serial_driver keyspan_4port_device = {
@@ -611,6 +617,8 @@ static struct usb_serial_driver keyspan_4port_device = {
 	.attach			= keyspan_startup,
 	.disconnect		= keyspan_disconnect,
 	.release		= keyspan_release,
+	.port_probe		= keyspan_port_probe,
+	.port_remove		= keyspan_port_remove,
 };
 
 static struct usb_serial_driver * const serial_drivers[] = {
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index ca43ecb4a2bd..bb87e29c4ac2 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -713,29 +713,33 @@ MODULE_FIRMWARE("keyspan_pda/keyspan_pda.fw");
 MODULE_FIRMWARE("keyspan_pda/xircom_pgs.fw");
 #endif
 
-static int keyspan_pda_startup(struct usb_serial *serial)
+static int keyspan_pda_port_probe(struct usb_serial_port *port)
 {
 
 	struct keyspan_pda_private *priv;
 
-	/* allocate the private data structures for all ports. Well, for all
-	   one ports. */
-
 	priv = kmalloc(sizeof(struct keyspan_pda_private), GFP_KERNEL);
 	if (!priv)
-		return 1; /* error */
-	usb_set_serial_port_data(serial->port[0], priv);
-	init_waitqueue_head(&serial->port[0]->write_wait);
+		return -ENOMEM;
+
 	INIT_WORK(&priv->wakeup_work, keyspan_pda_wakeup_write);
 	INIT_WORK(&priv->unthrottle_work, keyspan_pda_request_unthrottle);
-	priv->serial = serial;
-	priv->port = serial->port[0];
+	priv->serial = port->serial;
+	priv->port = port;
+
+	usb_set_serial_port_data(port, priv);
+
 	return 0;
 }
 
-static void keyspan_pda_release(struct usb_serial *serial)
+static int keyspan_pda_port_remove(struct usb_serial_port *port)
 {
-	kfree(usb_get_serial_port_data(serial->port[0]));
+	struct keyspan_pda_private *priv;
+
+	priv = usb_get_serial_port_data(port);
+	kfree(priv);
+
+	return 0;
 }
 
 #ifdef KEYSPAN
@@ -786,8 +790,8 @@ static struct usb_serial_driver keyspan_pda_device = {
 	.break_ctl =		keyspan_pda_break_ctl,
 	.tiocmget =		keyspan_pda_tiocmget,
 	.tiocmset =		keyspan_pda_tiocmset,
-	.attach =		keyspan_pda_startup,
-	.release =		keyspan_pda_release,
+	.port_probe =		keyspan_pda_port_probe,
+	.port_remove =		keyspan_pda_port_remove,
 };
 
 static struct usb_serial_driver * const serial_drivers[] = {
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index 3f6d7376c02d..1f4517864cd2 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -60,8 +60,8 @@
 /*
  * Function prototypes
  */
-static int  klsi_105_startup(struct usb_serial *serial);
-static void klsi_105_release(struct usb_serial *serial);
+static int klsi_105_port_probe(struct usb_serial_port *port);
+static int klsi_105_port_remove(struct usb_serial_port *port);
 static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void klsi_105_close(struct usb_serial_port *port);
 static void klsi_105_set_termios(struct tty_struct *tty,
@@ -99,8 +99,8 @@ static struct usb_serial_driver kl5kusb105d_device = {
 	/*.break_ctl =		klsi_105_break_ctl,*/
 	.tiocmget =		klsi_105_tiocmget,
 	.tiocmset =		klsi_105_tiocmset,
-	.attach =		klsi_105_startup,
-	.release =		klsi_105_release,
+	.port_probe =		klsi_105_port_probe,
+	.port_remove =		klsi_105_port_remove,
 	.throttle =		usb_serial_generic_throttle,
 	.unthrottle =		usb_serial_generic_unthrottle,
 	.process_read_urb =	klsi_105_process_read_urb,
@@ -223,60 +223,40 @@ static int klsi_105_get_line_state(struct usb_serial_port *port,
  * Driver's tty interface functions
  */
 
-static int klsi_105_startup(struct usb_serial *serial)
+static int klsi_105_port_probe(struct usb_serial_port *port)
 {
 	struct klsi_105_private *priv;
-	int i;
 
-	/* check if we support the product id (see keyspan.c)
-	 * FIXME
-	 */
+	priv = kmalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
 
-	/* allocate the private data structure */
-	for (i = 0; i < serial->num_ports; i++) {
-		priv = kmalloc(sizeof(struct klsi_105_private),
-						   GFP_KERNEL);
-		if (!priv) {
-			dev_dbg(&serial->interface->dev,
-				"%s - kmalloc for klsi_105_private failed.\n",
-				__func__);
-			i--;
-			goto err_cleanup;
-		}
-		/* set initial values for control structures */
-		priv->cfg.pktlen    = 5;
-		priv->cfg.baudrate  = kl5kusb105a_sio_b9600;
-		priv->cfg.databits  = kl5kusb105a_dtb_8;
-		priv->cfg.unknown1  = 0;
-		priv->cfg.unknown2  = 1;
+	/* set initial values for control structures */
+	priv->cfg.pktlen    = 5;
+	priv->cfg.baudrate  = kl5kusb105a_sio_b9600;
+	priv->cfg.databits  = kl5kusb105a_dtb_8;
+	priv->cfg.unknown1  = 0;
+	priv->cfg.unknown2  = 1;
 
-		priv->line_state    = 0;
+	priv->line_state    = 0;
 
-		usb_set_serial_port_data(serial->port[i], priv);
+	spin_lock_init(&priv->lock);
 
-		spin_lock_init(&priv->lock);
+	/* priv->termios is left uninitialized until port opening */
 
-		/* priv->termios is left uninitialized until port opening */
-		init_waitqueue_head(&serial->port[i]->write_wait);
-	}
+	usb_set_serial_port_data(port, priv);
 
 	return 0;
-
-err_cleanup:
-	for (; i >= 0; i--) {
-		priv = usb_get_serial_port_data(serial->port[i]);
-		kfree(priv);
-		usb_set_serial_port_data(serial->port[i], NULL);
-	}
-	return -ENOMEM;
 }
 
-static void klsi_105_release(struct usb_serial *serial)
+static int klsi_105_port_remove(struct usb_serial_port *port)
 {
-	int i;
+	struct klsi_105_private *priv;
+
+	priv = usb_get_serial_port_data(port);
+	kfree(priv);
 
-	for (i = 0; i < serial->num_ports; ++i)
-		kfree(usb_get_serial_port_data(serial->port[i]));
+	return 0;
 }
 
 static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 5c4d2fbd4e11..c9ca7a5b12e0 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -54,8 +54,8 @@
 
 
 /* Function prototypes */
-static int  kobil_startup(struct usb_serial *serial);
-static void kobil_release(struct usb_serial *serial);
+static int kobil_port_probe(struct usb_serial_port *probe);
+static int kobil_port_remove(struct usb_serial_port *probe);
 static int  kobil_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void kobil_close(struct usb_serial_port *port);
 static int  kobil_write(struct tty_struct *tty, struct usb_serial_port *port,
@@ -89,8 +89,8 @@ static struct usb_serial_driver kobil_device = {
 	.description =		"KOBIL USB smart card terminal",
 	.id_table =		id_table,
 	.num_ports =		1,
-	.attach =		kobil_startup,
-	.release =		kobil_release,
+	.port_probe =		kobil_port_probe,
+	.port_remove =		kobil_port_remove,
 	.ioctl =		kobil_ioctl,
 	.set_termios =		kobil_set_termios,
 	.init_termios =		kobil_init_termios,
@@ -117,9 +117,10 @@ struct kobil_private {
 };
 
 
-static int kobil_startup(struct usb_serial *serial)
+static int kobil_port_probe(struct usb_serial_port *port)
 {
 	int i;
+	struct usb_serial *serial = port->serial;
 	struct kobil_private *priv;
 	struct usb_device *pdev;
 	struct usb_host_config *actconfig;
@@ -149,7 +150,7 @@ static int kobil_startup(struct usb_serial *serial)
 		dev_dbg(&serial->dev->dev, "KOBIL KAAN SIM detected\n");
 		break;
 	}
-	usb_set_serial_port_data(serial->port[0], priv);
+	usb_set_serial_port_data(port, priv);
 
 	/* search for the necessary endpoints */
 	pdev = serial->dev;
@@ -179,12 +180,14 @@ static int kobil_startup(struct usb_serial *serial)
 }
 
 
-static void kobil_release(struct usb_serial *serial)
+static int kobil_port_remove(struct usb_serial_port *port)
 {
-	int i;
+	struct kobil_private *priv;
 
-	for (i = 0; i < serial->num_ports; ++i)
-		kfree(usb_get_serial_port_data(serial->port[i]));
+	priv = usb_get_serial_port_data(port);
+	kfree(priv);
+
+	return 0;
 }
 
 static void kobil_init_termios(struct tty_struct *tty)
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index f3947712e137..8a2081004107 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -49,7 +49,8 @@
  * Function prototypes
  */
 static int  mct_u232_startup(struct usb_serial *serial);
-static void mct_u232_release(struct usb_serial *serial);
+static int  mct_u232_port_probe(struct usb_serial_port *port);
+static int  mct_u232_port_remove(struct usb_serial_port *remove);
 static int  mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void mct_u232_close(struct usb_serial_port *port);
 static void mct_u232_dtr_rts(struct usb_serial_port *port, int on);
@@ -99,7 +100,8 @@ static struct usb_serial_driver mct_u232_device = {
 	.tiocmget =	     mct_u232_tiocmget,
 	.tiocmset =	     mct_u232_tiocmset,
 	.attach =	     mct_u232_startup,
-	.release =	     mct_u232_release,
+	.port_probe =        mct_u232_port_probe,
+	.port_remove =       mct_u232_port_remove,
 	.ioctl =             mct_u232_ioctl,
 	.get_icount =        mct_u232_get_icount,
 };
@@ -388,18 +390,8 @@ static void mct_u232_msr_to_state(struct usb_serial_port *port,
 
 static int mct_u232_startup(struct usb_serial *serial)
 {
-	struct mct_u232_private *priv;
 	struct usb_serial_port *port, *rport;
 
-	priv = kzalloc(sizeof(struct mct_u232_private), GFP_KERNEL);
-	if (!priv)
-		return -ENOMEM;
-	spin_lock_init(&priv->lock);
-	init_waitqueue_head(&priv->msr_wait);
-	usb_set_serial_port_data(serial->port[0], priv);
-
-	init_waitqueue_head(&serial->port[0]->write_wait);
-
 	/* Puh, that's dirty */
 	port = serial->port[0];
 	rport = serial->port[1];
@@ -412,18 +404,31 @@ static int mct_u232_startup(struct usb_serial *serial)
 	return 0;
 } /* mct_u232_startup */
 
+static int mct_u232_port_probe(struct usb_serial_port *port)
+{
+	struct mct_u232_private *priv;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	spin_lock_init(&priv->lock);
+	init_waitqueue_head(&priv->msr_wait);
+
+	usb_set_serial_port_data(port, priv);
 
-static void mct_u232_release(struct usb_serial *serial)
+	return 0;
+}
+
+static int mct_u232_port_remove(struct usb_serial_port *port)
 {
 	struct mct_u232_private *priv;
-	int i;
 
-	for (i = 0; i < serial->num_ports; ++i) {
-		/* My special items, the standard routines free my urbs */
-		priv = usb_get_serial_port_data(serial->port[i]);
-		kfree(priv);
-	}
-} /* mct_u232_release */
+	priv = usb_get_serial_port_data(port);
+	kfree(priv);
+
+	return 0;
+}
 
 static int  mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
@@ -515,12 +520,14 @@ static void mct_u232_dtr_rts(struct usb_serial_port *port, int on)
 
 static void mct_u232_close(struct usb_serial_port *port)
 {
-	if (port->serial->dev) {
-		/* shutdown our urbs */
-		usb_kill_urb(port->write_urb);
-		usb_kill_urb(port->read_urb);
-		usb_kill_urb(port->interrupt_in_urb);
-	}
+	/*
+	 * Must kill the read urb as it is actually an interrupt urb, which
+	 * generic close thus fails to kill.
+	 */
+	usb_kill_urb(port->read_urb);
+	usb_kill_urb(port->interrupt_in_urb);
+
+	usb_serial_generic_close(port);
 } /* mct_u232_close */
 
 
diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c
index 0b257ddffbdb..6f29c74eb769 100644
--- a/drivers/usb/serial/metro-usb.c
+++ b/drivers/usb/serial/metro-usb.c
@@ -179,16 +179,13 @@ static void metrousb_cleanup(struct usb_serial_port *port)
 {
 	dev_dbg(&port->dev, "%s\n", __func__);
 
-	if (port->serial->dev) {
-		/* Shutdown any interrupt in urbs. */
-		if (port->interrupt_in_urb) {
-			usb_unlink_urb(port->interrupt_in_urb);
-			usb_kill_urb(port->interrupt_in_urb);
-		}
-
-		/* Send deactivate cmd to device */
+	usb_unlink_urb(port->interrupt_in_urb);
+	usb_kill_urb(port->interrupt_in_urb);
+
+	mutex_lock(&port->serial->disc_mutex);
+	if (!port->serial->disconnected)
 		metrousb_send_unidirectional_cmd(UNI_CMD_CLOSE, port);
-	}
+	mutex_unlock(&port->serial->disc_mutex);
 }
 
 static int metrousb_open(struct tty_struct *tty, struct usb_serial_port *port)
@@ -271,51 +268,27 @@ static int metrousb_set_modem_ctrl(struct usb_serial *serial, unsigned int contr
 	return retval;
 }
 
-static void metrousb_shutdown(struct usb_serial *serial)
+static int metrousb_port_probe(struct usb_serial_port *port)
 {
-	int i = 0;
+	struct metrousb_private *metro_priv;
 
-	dev_dbg(&serial->dev->dev, "%s\n", __func__);
+	metro_priv = kzalloc(sizeof(*metro_priv), GFP_KERNEL);
+	if (!metro_priv)
+		return -ENOMEM;
 
-	/* Stop reading and writing on all ports. */
-	for (i = 0; i < serial->num_ports; ++i) {
-		/* Close any open urbs. */
-		metrousb_cleanup(serial->port[i]);
+	spin_lock_init(&metro_priv->lock);
 
-		/* Free memory. */
-		kfree(usb_get_serial_port_data(serial->port[i]));
-		usb_set_serial_port_data(serial->port[i], NULL);
+	usb_set_serial_port_data(port, metro_priv);
 
-		dev_dbg(&serial->dev->dev, "%s - freed port number=%d\n",
-			__func__, serial->port[i]->number);
-	}
+	return 0;
 }
 
-static int metrousb_startup(struct usb_serial *serial)
+static int metrousb_port_remove(struct usb_serial_port *port)
 {
 	struct metrousb_private *metro_priv;
-	struct usb_serial_port *port;
-	int i = 0;
 
-	dev_dbg(&serial->dev->dev, "%s\n", __func__);
-
-	/* Loop through the serial ports setting up the private structures.
-	 * Currently we only use one port. */
-	for (i = 0; i < serial->num_ports; ++i) {
-		port = serial->port[i];
-
-		/* Declare memory. */
-		metro_priv = kzalloc(sizeof(struct metrousb_private), GFP_KERNEL);
-		if (!metro_priv)
-			return -ENOMEM;
-
-		/* Initialize memory. */
-		spin_lock_init(&metro_priv->lock);
-		usb_set_serial_port_data(port, metro_priv);
-
-		dev_dbg(&serial->dev->dev, "%s - port number=%d\n ",
-			__func__, port->number);
-	}
+	metro_priv = usb_get_serial_port_data(port);
+	kfree(metro_priv);
 
 	return 0;
 }
@@ -414,8 +387,8 @@ static struct usb_serial_driver metrousb_device = {
 	.close			= metrousb_cleanup,
 	.read_int_callback	= metrousb_read_int_callback,
 	.write_int_callback	= metrousb_write_int_callback,
-	.attach			= metrousb_startup,
-	.release		= metrousb_shutdown,
+	.port_probe		= metrousb_port_probe,
+	.port_remove		= metrousb_port_remove,
 	.throttle		= metrousb_throttle,
 	.unthrottle		= metrousb_unthrottle,
 	.tiocmget		= metrousb_tiocmget,
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 1bf1ad066666..75267421aad8 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -1966,9 +1966,7 @@ static int mos7720_ioctl(struct tty_struct *tty,
 
 static int mos7720_startup(struct usb_serial *serial)
 {
-	struct moschip_port *mos7720_port;
 	struct usb_device *dev;
-	int i;
 	char data;
 	u16 product;
 	int ret_val;
@@ -1999,29 +1997,6 @@ static int mos7720_startup(struct usb_serial *serial)
 		serial->port[1]->interrupt_in_buffer = NULL;
 	}
 
-
-	/* set up serial port private structures */
-	for (i = 0; i < serial->num_ports; ++i) {
-		mos7720_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL);
-		if (mos7720_port == NULL) {
-			dev_err(&dev->dev, "%s - Out of memory\n", __func__);
-			return -ENOMEM;
-		}
-
-		/* Initialize all port interrupt end point to port 0 int
-		 * endpoint.  Our device has only one interrupt endpoint
-		 * common to all ports */
-		serial->port[i]->interrupt_in_endpointAddress =
-				serial->port[0]->interrupt_in_endpointAddress;
-
-		mos7720_port->port = serial->port[i];
-		usb_set_serial_port_data(serial->port[i], mos7720_port);
-
-		dev_dbg(&dev->dev, "port number is %d\n", serial->port[i]->number);
-		dev_dbg(&dev->dev, "serial number is %d\n", serial->minor);
-	}
-
-
 	/* setting configuration feature to one */
 	usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 			(__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5*HZ);
@@ -2049,8 +2024,6 @@ static int mos7720_startup(struct usb_serial *serial)
 
 static void mos7720_release(struct usb_serial *serial)
 {
-	int i;
-
 #ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT
 	/* close the parallel port */
 
@@ -2089,9 +2062,36 @@ static void mos7720_release(struct usb_serial *serial)
 		kref_put(&mos_parport->ref_count, destroy_mos_parport);
 	}
 #endif
-	/* free private structure allocated for serial port */
-	for (i = 0; i < serial->num_ports; ++i)
-		kfree(usb_get_serial_port_data(serial->port[i]));
+}
+
+static int mos7720_port_probe(struct usb_serial_port *port)
+{
+	struct moschip_port *mos7720_port;
+
+	mos7720_port = kzalloc(sizeof(*mos7720_port), GFP_KERNEL);
+	if (!mos7720_port)
+		return -ENOMEM;
+
+	/* Initialize all port interrupt end point to port 0 int endpoint.
+	 * Our device has only one interrupt endpoint common to all ports.
+	 */
+	port->interrupt_in_endpointAddress =
+		port->serial->port[0]->interrupt_in_endpointAddress;
+	mos7720_port->port = port;
+
+	usb_set_serial_port_data(port, mos7720_port);
+
+	return 0;
+}
+
+static int mos7720_port_remove(struct usb_serial_port *port)
+{
+	struct moschip_port *mos7720_port;
+
+	mos7720_port = usb_get_serial_port_data(port);
+	kfree(mos7720_port);
+
+	return 0;
 }
 
 static struct usb_serial_driver moschip7720_2port_driver = {
@@ -2109,6 +2109,8 @@ static struct usb_serial_driver moschip7720_2port_driver = {
 	.probe			= mos77xx_probe,
 	.attach			= mos7720_startup,
 	.release		= mos7720_release,
+	.port_probe		= mos7720_port_probe,
+	.port_remove		= mos7720_port_remove,
 	.ioctl			= mos7720_ioctl,
 	.tiocmget		= mos7720_tiocmget,
 	.tiocmset		= mos7720_tiocmset,
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index d6d4eeca8c68..1cf3375ec1af 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -218,12 +218,10 @@ struct moschip_port {
 	int port_num;		/*Actual port number in the device(1,2,etc) */
 	struct urb *write_urb;	/* write URB for this port */
 	struct urb *read_urb;	/* read URB for this port */
-	struct urb *int_urb;
 	__u8 shadowLCR;		/* last LCR value received */
 	__u8 shadowMCR;		/* last MCR value received */
 	char open;
 	char open_ports;
-	char zombie;
 	wait_queue_head_t wait_chase;	/* for handling sleeping while waiting for chase to finish */
 	wait_queue_head_t delta_msr_wait;	/* for handling sleeping while waiting for msr change to happen */
 	int delta_msr_cond;
@@ -478,7 +476,6 @@ static void mos7840_control_callback(struct urb *urb)
 	struct moschip_port *mos7840_port;
 	struct device *dev = &urb->dev->dev;
 	__u8 regval = 0x0;
-	int result = 0;
 	int status = urb->status;
 
 	mos7840_port = urb->context;
@@ -495,7 +492,7 @@ static void mos7840_control_callback(struct urb *urb)
 		return;
 	default:
 		dev_dbg(dev, "%s - nonzero urb status received: %d\n", __func__, status);
-		goto exit;
+		return;
 	}
 
 	dev_dbg(dev, "%s urb buffer size is %d\n", __func__, urb->actual_length);
@@ -508,16 +505,6 @@ static void mos7840_control_callback(struct urb *urb)
 		mos7840_handle_new_msr(mos7840_port, regval);
 	else if (mos7840_port->MsrLsr == 1)
 		mos7840_handle_new_lsr(mos7840_port, regval);
-
-exit:
-	spin_lock(&mos7840_port->pool_lock);
-	if (!mos7840_port->zombie)
-		result = usb_submit_urb(mos7840_port->int_urb, GFP_ATOMIC);
-	spin_unlock(&mos7840_port->pool_lock);
-	if (result) {
-		dev_err(dev, "%s - Error %d submitting interrupt urb\n",
-			__func__, result);
-	}
 }
 
 static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg,
@@ -686,14 +673,7 @@ static void mos7840_interrupt_callback(struct urb *urb)
 					wreg = MODEM_STATUS_REGISTER;
 					break;
 				}
-				spin_lock(&mos7840_port->pool_lock);
-				if (!mos7840_port->zombie) {
-					rv = mos7840_get_reg(mos7840_port, wval, wreg, &Data);
-				} else {
-					spin_unlock(&mos7840_port->pool_lock);
-					return;
-				}
-				spin_unlock(&mos7840_port->pool_lock);
+				rv = mos7840_get_reg(mos7840_port, wval, wreg, &Data);
 			}
 		}
 	}
@@ -2347,309 +2327,249 @@ static int mos7840_calc_num_ports(struct usb_serial *serial)
 	return mos7840_num_ports;
 }
 
-/****************************************************************************
- * mos7840_startup
- ****************************************************************************/
-
-static int mos7840_startup(struct usb_serial *serial)
+static int mos7840_port_probe(struct usb_serial_port *port)
 {
+	struct usb_serial *serial = port->serial;
 	struct moschip_port *mos7840_port;
-	struct usb_device *dev;
-	int i, status;
+	int status;
+	int pnum;
 	__u16 Data;
 
-	dev = serial->dev;
-
 	/* we set up the pointers to the endpoints in the mos7840_open *
 	 * function, as the structures aren't created yet.             */
 
-	/* set up port private structures */
-	for (i = 0; i < serial->num_ports; ++i) {
-		dev_dbg(&dev->dev, "mos7840_startup: configuring port %d............\n", i);
-		mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL);
-		if (mos7840_port == NULL) {
-			dev_err(&dev->dev, "%s - Out of memory\n", __func__);
-			status = -ENOMEM;
-			i--; /* don't follow NULL pointer cleaning up */
-			goto error;
-		}
-
-		/* Initialize all port interrupt end point to port 0 int
-		 * endpoint. Our device has only one interrupt end point
-		 * common to all port */
-
-		mos7840_port->port = serial->port[i];
-		mos7840_set_port_private(serial->port[i], mos7840_port);
-		spin_lock_init(&mos7840_port->pool_lock);
-
-		/* minor is not initialised until later by
-		 * usb-serial.c:get_free_serial() and cannot therefore be used
-		 * to index device instances */
-		mos7840_port->port_num = i + 1;
-		dev_dbg(&dev->dev, "serial->port[i]->number = %d\n", serial->port[i]->number);
-		dev_dbg(&dev->dev, "serial->port[i]->serial->minor = %d\n", serial->port[i]->serial->minor);
-		dev_dbg(&dev->dev, "mos7840_port->port_num = %d\n", mos7840_port->port_num);
-		dev_dbg(&dev->dev, "serial->minor = %d\n", serial->minor);
-
-		if (mos7840_port->port_num == 1) {
-			mos7840_port->SpRegOffset = 0x0;
-			mos7840_port->ControlRegOffset = 0x1;
-			mos7840_port->DcrRegOffset = 0x4;
-		} else if ((mos7840_port->port_num == 2)
-			   && (serial->num_ports == 4)) {
-			mos7840_port->SpRegOffset = 0x8;
-			mos7840_port->ControlRegOffset = 0x9;
-			mos7840_port->DcrRegOffset = 0x16;
-		} else if ((mos7840_port->port_num == 2)
-			   && (serial->num_ports == 2)) {
-			mos7840_port->SpRegOffset = 0xa;
-			mos7840_port->ControlRegOffset = 0xb;
-			mos7840_port->DcrRegOffset = 0x19;
-		} else if ((mos7840_port->port_num == 3)
-			   && (serial->num_ports == 4)) {
-			mos7840_port->SpRegOffset = 0xa;
-			mos7840_port->ControlRegOffset = 0xb;
-			mos7840_port->DcrRegOffset = 0x19;
-		} else if ((mos7840_port->port_num == 4)
-			   && (serial->num_ports == 4)) {
-			mos7840_port->SpRegOffset = 0xc;
-			mos7840_port->ControlRegOffset = 0xd;
-			mos7840_port->DcrRegOffset = 0x1c;
-		}
-		mos7840_dump_serial_port(serial->port[i], mos7840_port);
-		mos7840_set_port_private(serial->port[i], mos7840_port);
+	pnum = port->number - serial->minor;
 
-		/* enable rx_disable bit in control register */
-		status = mos7840_get_reg_sync(serial->port[i],
-				 mos7840_port->ControlRegOffset, &Data);
-		if (status < 0) {
-			dev_dbg(&dev->dev, "Reading ControlReg failed status-0x%x\n", status);
-			break;
-		} else
-			dev_dbg(&dev->dev, "ControlReg Reading success val is %x, status%d\n", Data, status);
-		Data |= 0x08;	/* setting driver done bit */
-		Data |= 0x04;	/* sp1_bit to have cts change reflect in
-				   modem status reg */
-
-		/* Data |= 0x20; //rx_disable bit */
-		status = mos7840_set_reg_sync(serial->port[i],
-					 mos7840_port->ControlRegOffset, Data);
-		if (status < 0) {
-			dev_dbg(&dev->dev, "Writing ControlReg failed(rx_disable) status-0x%x\n", status);
-			break;
-		} else
-			dev_dbg(&dev->dev, "ControlReg Writing success(rx_disable) status%d\n", status);
+	dev_dbg(&port->dev, "mos7840_startup: configuring port %d\n", pnum);
+	mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL);
+	if (mos7840_port == NULL) {
+		dev_err(&port->dev, "%s - Out of memory\n", __func__);
+		return -ENOMEM;
+	}
 
-		/* Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2
-		   and 0x24 in DCR3 */
-		Data = 0x01;
-		status = mos7840_set_reg_sync(serial->port[i],
-			 (__u16) (mos7840_port->DcrRegOffset + 0), Data);
-		if (status < 0) {
-			dev_dbg(&dev->dev, "Writing DCR0 failed status-0x%x\n", status);
-			break;
-		} else
-			dev_dbg(&dev->dev, "DCR0 Writing success status%d\n", status);
+	/* Initialize all port interrupt end point to port 0 int
+	 * endpoint. Our device has only one interrupt end point
+	 * common to all port */
+
+	mos7840_port->port = port;
+	mos7840_set_port_private(port, mos7840_port);
+	spin_lock_init(&mos7840_port->pool_lock);
+
+	/* minor is not initialised until later by
+	 * usb-serial.c:get_free_serial() and cannot therefore be used
+	 * to index device instances */
+	mos7840_port->port_num = pnum + 1;
+	dev_dbg(&port->dev, "port->number = %d\n", port->number);
+	dev_dbg(&port->dev, "port->serial->minor = %d\n", port->serial->minor);
+	dev_dbg(&port->dev, "mos7840_port->port_num = %d\n", mos7840_port->port_num);
+	dev_dbg(&port->dev, "serial->minor = %d\n", serial->minor);
+
+	if (mos7840_port->port_num == 1) {
+		mos7840_port->SpRegOffset = 0x0;
+		mos7840_port->ControlRegOffset = 0x1;
+		mos7840_port->DcrRegOffset = 0x4;
+	} else if ((mos7840_port->port_num == 2) && (serial->num_ports == 4)) {
+		mos7840_port->SpRegOffset = 0x8;
+		mos7840_port->ControlRegOffset = 0x9;
+		mos7840_port->DcrRegOffset = 0x16;
+	} else if ((mos7840_port->port_num == 2) && (serial->num_ports == 2)) {
+		mos7840_port->SpRegOffset = 0xa;
+		mos7840_port->ControlRegOffset = 0xb;
+		mos7840_port->DcrRegOffset = 0x19;
+	} else if ((mos7840_port->port_num == 3) && (serial->num_ports == 4)) {
+		mos7840_port->SpRegOffset = 0xa;
+		mos7840_port->ControlRegOffset = 0xb;
+		mos7840_port->DcrRegOffset = 0x19;
+	} else if ((mos7840_port->port_num == 4) && (serial->num_ports == 4)) {
+		mos7840_port->SpRegOffset = 0xc;
+		mos7840_port->ControlRegOffset = 0xd;
+		mos7840_port->DcrRegOffset = 0x1c;
+	}
+	mos7840_dump_serial_port(port, mos7840_port);
+	mos7840_set_port_private(port, mos7840_port);
+
+	/* enable rx_disable bit in control register */
+	status = mos7840_get_reg_sync(port,
+			mos7840_port->ControlRegOffset, &Data);
+	if (status < 0) {
+		dev_dbg(&port->dev, "Reading ControlReg failed status-0x%x\n", status);
+		goto out;
+	} else
+		dev_dbg(&port->dev, "ControlReg Reading success val is %x, status%d\n", Data, status);
+	Data |= 0x08;	/* setting driver done bit */
+	Data |= 0x04;	/* sp1_bit to have cts change reflect in
+			   modem status reg */
 
-		Data = 0x05;
-		status = mos7840_set_reg_sync(serial->port[i],
-			 (__u16) (mos7840_port->DcrRegOffset + 1), Data);
-		if (status < 0) {
-			dev_dbg(&dev->dev, "Writing DCR1 failed status-0x%x\n", status);
-			break;
-		} else
-			dev_dbg(&dev->dev, "DCR1 Writing success status%d\n", status);
+	/* Data |= 0x20; //rx_disable bit */
+	status = mos7840_set_reg_sync(port,
+			mos7840_port->ControlRegOffset, Data);
+	if (status < 0) {
+		dev_dbg(&port->dev, "Writing ControlReg failed(rx_disable) status-0x%x\n", status);
+		goto out;
+	} else
+		dev_dbg(&port->dev, "ControlReg Writing success(rx_disable) status%d\n", status);
 
-		Data = 0x24;
-		status = mos7840_set_reg_sync(serial->port[i],
-			 (__u16) (mos7840_port->DcrRegOffset + 2), Data);
-		if (status < 0) {
-			dev_dbg(&dev->dev, "Writing DCR2 failed status-0x%x\n", status);
-			break;
-		} else
-			dev_dbg(&dev->dev, "DCR2 Writing success status%d\n", status);
+	/* Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2
+	   and 0x24 in DCR3 */
+	Data = 0x01;
+	status = mos7840_set_reg_sync(port,
+			(__u16) (mos7840_port->DcrRegOffset + 0), Data);
+	if (status < 0) {
+		dev_dbg(&port->dev, "Writing DCR0 failed status-0x%x\n", status);
+		goto out;
+	} else
+		dev_dbg(&port->dev, "DCR0 Writing success status%d\n", status);
 
-		/* write values in clkstart0x0 and clkmulti 0x20 */
-		Data = 0x0;
-		status = mos7840_set_reg_sync(serial->port[i],
-					 CLK_START_VALUE_REGISTER, Data);
-		if (status < 0) {
-			dev_dbg(&dev->dev, "Writing CLK_START_VALUE_REGISTER failed status-0x%x\n", status);
-			break;
-		} else
-			dev_dbg(&dev->dev, "CLK_START_VALUE_REGISTER Writing success status%d\n", status);
+	Data = 0x05;
+	status = mos7840_set_reg_sync(port,
+			(__u16) (mos7840_port->DcrRegOffset + 1), Data);
+	if (status < 0) {
+		dev_dbg(&port->dev, "Writing DCR1 failed status-0x%x\n", status);
+		goto out;
+	} else
+		dev_dbg(&port->dev, "DCR1 Writing success status%d\n", status);
 
-		Data = 0x20;
-		status = mos7840_set_reg_sync(serial->port[i],
-					CLK_MULTI_REGISTER, Data);
-		if (status < 0) {
-			dev_dbg(&dev->dev, "Writing CLK_MULTI_REGISTER failed status-0x%x\n", status);
-			goto error;
-		} else
-			dev_dbg(&dev->dev, "CLK_MULTI_REGISTER Writing success status%d\n", status);
+	Data = 0x24;
+	status = mos7840_set_reg_sync(port,
+			(__u16) (mos7840_port->DcrRegOffset + 2), Data);
+	if (status < 0) {
+		dev_dbg(&port->dev, "Writing DCR2 failed status-0x%x\n", status);
+		goto out;
+	} else
+		dev_dbg(&port->dev, "DCR2 Writing success status%d\n", status);
 
-		/* write value 0x0 to scratchpad register */
-		Data = 0x00;
-		status = mos7840_set_uart_reg(serial->port[i],
-						SCRATCH_PAD_REGISTER, Data);
-		if (status < 0) {
-			dev_dbg(&dev->dev, "Writing SCRATCH_PAD_REGISTER failed status-0x%x\n", status);
-			break;
-		} else
-			dev_dbg(&dev->dev, "SCRATCH_PAD_REGISTER Writing success status%d\n", status);
+	/* write values in clkstart0x0 and clkmulti 0x20 */
+	Data = 0x0;
+	status = mos7840_set_reg_sync(port, CLK_START_VALUE_REGISTER, Data);
+	if (status < 0) {
+		dev_dbg(&port->dev, "Writing CLK_START_VALUE_REGISTER failed status-0x%x\n", status);
+		goto out;
+	} else
+		dev_dbg(&port->dev, "CLK_START_VALUE_REGISTER Writing success status%d\n", status);
 
-		/* Zero Length flag register */
-		if ((mos7840_port->port_num != 1)
-		    && (serial->num_ports == 2)) {
+	Data = 0x20;
+	status = mos7840_set_reg_sync(port, CLK_MULTI_REGISTER, Data);
+	if (status < 0) {
+		dev_dbg(&port->dev, "Writing CLK_MULTI_REGISTER failed status-0x%x\n", status);
+		goto error;
+	} else
+		dev_dbg(&port->dev, "CLK_MULTI_REGISTER Writing success status%d\n", status);
 
-			Data = 0xff;
-			status = mos7840_set_reg_sync(serial->port[i],
-				      (__u16) (ZLP_REG1 +
-				      ((__u16)mos7840_port->port_num)), Data);
-			dev_dbg(&dev->dev, "ZLIP offset %x\n",
+	/* write value 0x0 to scratchpad register */
+	Data = 0x00;
+	status = mos7840_set_uart_reg(port, SCRATCH_PAD_REGISTER, Data);
+	if (status < 0) {
+		dev_dbg(&port->dev, "Writing SCRATCH_PAD_REGISTER failed status-0x%x\n", status);
+		goto out;
+	} else
+		dev_dbg(&port->dev, "SCRATCH_PAD_REGISTER Writing success status%d\n", status);
+
+	/* Zero Length flag register */
+	if ((mos7840_port->port_num != 1) && (serial->num_ports == 2)) {
+		Data = 0xff;
+		status = mos7840_set_reg_sync(port,
+				(__u16) (ZLP_REG1 +
+					((__u16)mos7840_port->port_num)), Data);
+		dev_dbg(&port->dev, "ZLIP offset %x\n",
 				(__u16)(ZLP_REG1 + ((__u16) mos7840_port->port_num)));
-			if (status < 0) {
-				dev_dbg(&dev->dev, "Writing ZLP_REG%d failed status-0x%x\n", i + 2, status);
-				break;
-			} else
-				dev_dbg(&dev->dev, "ZLP_REG%d Writing success status%d\n", i + 2, status);
-		} else {
-			Data = 0xff;
-			status = mos7840_set_reg_sync(serial->port[i],
-			      (__u16) (ZLP_REG1 +
-			      ((__u16)mos7840_port->port_num) - 0x1), Data);
-			dev_dbg(&dev->dev, "ZLIP offset %x\n",
+		if (status < 0) {
+			dev_dbg(&port->dev, "Writing ZLP_REG%d failed status-0x%x\n", pnum + 2, status);
+			goto out;
+		} else
+			dev_dbg(&port->dev, "ZLP_REG%d Writing success status%d\n", pnum + 2, status);
+	} else {
+		Data = 0xff;
+		status = mos7840_set_reg_sync(port,
+				(__u16) (ZLP_REG1 +
+					((__u16)mos7840_port->port_num) - 0x1), Data);
+		dev_dbg(&port->dev, "ZLIP offset %x\n",
 				(__u16)(ZLP_REG1 + ((__u16) mos7840_port->port_num) - 0x1));
-			if (status < 0) {
-				dev_dbg(&dev->dev, "Writing ZLP_REG%d failed status-0x%x\n", i + 1, status);
-				break;
-			} else
-				dev_dbg(&dev->dev, "ZLP_REG%d Writing success status%d\n", i + 1, status);
+		if (status < 0) {
+			dev_dbg(&port->dev, "Writing ZLP_REG%d failed status-0x%x\n", pnum + 1, status);
+			goto out;
+		} else
+			dev_dbg(&port->dev, "ZLP_REG%d Writing success status%d\n", pnum + 1, status);
 
-		}
-		mos7840_port->control_urb = usb_alloc_urb(0, GFP_KERNEL);
-		mos7840_port->ctrl_buf = kmalloc(16, GFP_KERNEL);
-		mos7840_port->dr = kmalloc(sizeof(struct usb_ctrlrequest),
-								GFP_KERNEL);
-		if (!mos7840_port->control_urb || !mos7840_port->ctrl_buf ||
-							!mos7840_port->dr) {
-			status = -ENOMEM;
-			goto error;
-		}
+	}
+	mos7840_port->control_urb = usb_alloc_urb(0, GFP_KERNEL);
+	mos7840_port->ctrl_buf = kmalloc(16, GFP_KERNEL);
+	mos7840_port->dr = kmalloc(sizeof(struct usb_ctrlrequest),
+			GFP_KERNEL);
+	if (!mos7840_port->control_urb || !mos7840_port->ctrl_buf ||
+			!mos7840_port->dr) {
+		status = -ENOMEM;
+		goto error;
+	}
 
-		mos7840_port->has_led = false;
+	mos7840_port->has_led = false;
 
-		/* Initialize LED timers */
-		if (device_type == MOSCHIP_DEVICE_ID_7810) {
-			mos7840_port->has_led = true;
+	/* Initialize LED timers */
+	if (device_type == MOSCHIP_DEVICE_ID_7810) {
+		mos7840_port->has_led = true;
 
-			init_timer(&mos7840_port->led_timer1);
-			mos7840_port->led_timer1.function = mos7840_led_off;
-			mos7840_port->led_timer1.expires =
-					jiffies + msecs_to_jiffies(LED_ON_MS);
-			mos7840_port->led_timer1.data =
-						(unsigned long)mos7840_port;
+		init_timer(&mos7840_port->led_timer1);
+		mos7840_port->led_timer1.function = mos7840_led_off;
+		mos7840_port->led_timer1.expires =
+			jiffies + msecs_to_jiffies(LED_ON_MS);
+		mos7840_port->led_timer1.data = (unsigned long)mos7840_port;
 
-			init_timer(&mos7840_port->led_timer2);
-			mos7840_port->led_timer2.function =
-						mos7840_led_flag_off;
-			mos7840_port->led_timer2.expires =
-					jiffies + msecs_to_jiffies(LED_OFF_MS);
-			mos7840_port->led_timer2.data =
-						(unsigned long)mos7840_port;
+		init_timer(&mos7840_port->led_timer2);
+		mos7840_port->led_timer2.function = mos7840_led_flag_off;
+		mos7840_port->led_timer2.expires =
+			jiffies + msecs_to_jiffies(LED_OFF_MS);
+		mos7840_port->led_timer2.data = (unsigned long)mos7840_port;
 
-			mos7840_port->led_flag = false;
+		mos7840_port->led_flag = false;
 
-			/* Turn off LED */
-			mos7840_set_led_sync(serial->port[i],
-						MODEM_CONTROL_REGISTER, 0x0300);
-		}
+		/* Turn off LED */
+		mos7840_set_led_sync(port, MODEM_CONTROL_REGISTER, 0x0300);
 	}
+out:
+	if (pnum == serial->num_ports - 1) {
+		/* Zero Length flag enable */
+		Data = 0x0f;
+		status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, Data);
+		if (status < 0) {
+			dev_dbg(&port->dev, "Writing ZLP_REG5 failed status-0x%x\n", status);
+			goto error;
+		} else
+			dev_dbg(&port->dev, "ZLP_REG5 Writing success status%d\n", status);
 
-	/* Zero Length flag enable */
-	Data = 0x0f;
-	status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, Data);
-	if (status < 0) {
-		dev_dbg(&dev->dev, "Writing ZLP_REG5 failed status-0x%x\n", status);
-		goto error;
-	} else
-		dev_dbg(&dev->dev, "ZLP_REG5 Writing success status%d\n", status);
-
-	/* setting configuration feature to one */
-	usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
-			(__u8) 0x03, 0x00, 0x01, 0x00, NULL, 0x00, MOS_WDR_TIMEOUT);
+		/* setting configuration feature to one */
+		usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+				0x03, 0x00, 0x01, 0x00, NULL, 0x00,
+				MOS_WDR_TIMEOUT);
+	}
 	return 0;
 error:
-	for (/* nothing */; i >= 0; i--) {
-		mos7840_port = mos7840_get_port_private(serial->port[i]);
+	kfree(mos7840_port->dr);
+	kfree(mos7840_port->ctrl_buf);
+	usb_free_urb(mos7840_port->control_urb);
+	kfree(mos7840_port);
 
-		kfree(mos7840_port->dr);
-		kfree(mos7840_port->ctrl_buf);
-		usb_free_urb(mos7840_port->control_urb);
-		kfree(mos7840_port);
-		serial->port[i] = NULL;
-	}
 	return status;
 }
 
-/****************************************************************************
- * mos7840_disconnect
- *	This function is called whenever the device is removed from the usb bus.
- ****************************************************************************/
-
-static void mos7840_disconnect(struct usb_serial *serial)
+static int mos7840_port_remove(struct usb_serial_port *port)
 {
-	int i;
-	unsigned long flags;
 	struct moschip_port *mos7840_port;
 
-	/* check for the ports to be closed,close the ports and disconnect */
+	mos7840_port = mos7840_get_port_private(port);
 
-	/* free private structure allocated for serial port  *
-	 * stop reads and writes on all ports                */
+	if (mos7840_port->has_led) {
+		/* Turn off LED */
+		mos7840_set_led_sync(port, MODEM_CONTROL_REGISTER, 0x0300);
 
-	for (i = 0; i < serial->num_ports; ++i) {
-		mos7840_port = mos7840_get_port_private(serial->port[i]);
-		if (mos7840_port) {
-			spin_lock_irqsave(&mos7840_port->pool_lock, flags);
-			mos7840_port->zombie = 1;
-			spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
-			usb_kill_urb(mos7840_port->control_urb);
-		}
+		del_timer_sync(&mos7840_port->led_timer1);
+		del_timer_sync(&mos7840_port->led_timer2);
 	}
-}
-
-/****************************************************************************
- * mos7840_release
- *	This function is called when the usb_serial structure is freed.
- ****************************************************************************/
-
-static void mos7840_release(struct usb_serial *serial)
-{
-	int i;
-	struct moschip_port *mos7840_port;
-
-	/* check for the ports to be closed,close the ports and disconnect */
+	usb_kill_urb(mos7840_port->control_urb);
+	usb_free_urb(mos7840_port->control_urb);
+	kfree(mos7840_port->ctrl_buf);
+	kfree(mos7840_port->dr);
+	kfree(mos7840_port);
 
-	/* free private structure allocated for serial port  *
-	 * stop reads and writes on all ports                */
-
-	for (i = 0; i < serial->num_ports; ++i) {
-		mos7840_port = mos7840_get_port_private(serial->port[i]);
-		if (mos7840_port) {
-			if (mos7840_port->has_led) {
-				/* Turn off LED */
-				mos7840_set_led_sync(mos7840_port->port,
-						MODEM_CONTROL_REGISTER, 0x0300);
-
-				del_timer_sync(&mos7840_port->led_timer1);
-				del_timer_sync(&mos7840_port->led_timer2);
-			}
-			kfree(mos7840_port->ctrl_buf);
-			kfree(mos7840_port->dr);
-			kfree(mos7840_port);
-		}
-	}
+	return 0;
 }
 
 static struct usb_serial_driver moschip7840_4port_device = {
@@ -2677,9 +2597,8 @@ static struct usb_serial_driver moschip7840_4port_device = {
 	.tiocmget = mos7840_tiocmget,
 	.tiocmset = mos7840_tiocmset,
 	.get_icount = mos7840_get_icount,
-	.attach = mos7840_startup,
-	.disconnect = mos7840_disconnect,
-	.release = mos7840_release,
+	.port_probe = mos7840_port_probe,
+	.port_remove = mos7840_port_remove,
 	.read_bulk_callback = mos7840_bulk_in_callback,
 	.read_int_callback = mos7840_interrupt_callback,
 };
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 6def58b79382..9ab73d295774 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -44,8 +44,8 @@ static int  omninet_write(struct tty_struct *tty, struct usb_serial_port *port,
 				const unsigned char *buf, int count);
 static int  omninet_write_room(struct tty_struct *tty);
 static void omninet_disconnect(struct usb_serial *serial);
-static void omninet_release(struct usb_serial *serial);
-static int omninet_attach(struct usb_serial *serial);
+static int omninet_port_probe(struct usb_serial_port *port);
+static int omninet_port_remove(struct usb_serial_port *port);
 
 static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNINET_ID) },
@@ -62,7 +62,8 @@ static struct usb_serial_driver zyxel_omninet_device = {
 	.description =		"ZyXEL - omni.net lcd plus usb",
 	.id_table =		id_table,
 	.num_ports =		1,
-	.attach =		omninet_attach,
+	.port_probe =		omninet_port_probe,
+	.port_remove =		omninet_port_remove,
 	.open =			omninet_open,
 	.close =		omninet_close,
 	.write =		omninet_write,
@@ -70,7 +71,6 @@ static struct usb_serial_driver zyxel_omninet_device = {
 	.read_bulk_callback =	omninet_read_bulk_callback,
 	.write_bulk_callback =	omninet_write_bulk_callback,
 	.disconnect =		omninet_disconnect,
-	.release =		omninet_release,
 };
 
 static struct usb_serial_driver * const serial_drivers[] = {
@@ -112,18 +112,26 @@ struct omninet_data {
 	__u8	od_outseq;	/* Sequence number for bulk_out URBs */
 };
 
-static int omninet_attach(struct usb_serial *serial)
+static int omninet_port_probe(struct usb_serial_port *port)
 {
 	struct omninet_data *od;
-	struct usb_serial_port *port = serial->port[0];
 
 	od = kmalloc(sizeof(struct omninet_data), GFP_KERNEL);
-	if (!od) {
-		dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n",
-			__func__, sizeof(struct omninet_data));
+	if (!od)
 		return -ENOMEM;
-	}
+
 	usb_set_serial_port_data(port, od);
+
+	return 0;
+}
+
+static int omninet_port_remove(struct usb_serial_port *port)
+{
+	struct omninet_data *od;
+
+	od = usb_get_serial_port_data(port);
+	kfree(od);
+
 	return 0;
 }
 
@@ -279,14 +287,6 @@ static void omninet_disconnect(struct usb_serial *serial)
 	usb_kill_urb(wport->write_urb);
 }
 
-
-static void omninet_release(struct usb_serial *serial)
-{
-	struct usb_serial_port *port = serial->port[0];
-
-	kfree(usb_get_serial_port_data(port));
-}
-
 module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 41b1647306eb..6aba731d4864 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -155,7 +155,11 @@ static int send_control_msg(struct usb_serial_port *port, u8 requesttype,
 {
 	struct usb_serial *serial = port->serial;
 	int retval;
-	u8 buffer[2];
+	u8 *buffer;
+
+	buffer = kzalloc(1, GFP_KERNEL);
+	if (!buffer)
+		return -ENOMEM;
 
 	buffer[0] = val;
 	/* Send the message to the vendor control endpoint
@@ -164,6 +168,7 @@ static int send_control_msg(struct usb_serial_port *port, u8 requesttype,
 				requesttype,
 				USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE,
 				0, 0, buffer, 1, 0);
+	kfree(buffer);
 
 	return retval;
 }
@@ -281,7 +286,7 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port,
 	if (!dr) {
 		dev_err(&port->dev, "out of memory\n");
 		count = -ENOMEM;
-		goto error;
+		goto error_no_dr;
 	}
 
 	dr->bRequestType = USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT;
@@ -311,6 +316,8 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port,
 
 	return count;
 error:
+	kfree(dr);
+error_no_dr:
 	usb_free_urb(urb);
 error_no_urb:
 	kfree(buffer);
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 30cff03e9f01..5dee7d61241e 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -47,6 +47,7 @@
 /* Function prototypes */
 static int  option_probe(struct usb_serial *serial,
 			const struct usb_device_id *id);
+static int option_attach(struct usb_serial *serial);
 static void option_release(struct usb_serial *serial);
 static int option_send_setup(struct usb_serial_port *port);
 static void option_instat_callback(struct urb *urb);
@@ -503,11 +504,19 @@ static const struct option_blacklist_info net_intf5_blacklist = {
 	.reserved = BIT(5),
 };
 
+static const struct option_blacklist_info net_intf6_blacklist = {
+	.reserved = BIT(6),
+};
+
 static const struct option_blacklist_info zte_mf626_blacklist = {
 	.sendsetup = BIT(0) | BIT(1),
 	.reserved = BIT(4),
 };
 
+static const struct option_blacklist_info zte_1255_blacklist = {
+	.reserved = BIT(3) | BIT(4),
+};
+
 static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -853,13 +862,19 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0113, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0117, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0118, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0121, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0118, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0121, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0122, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0123, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0124, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0125, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0126, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0123, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0124, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0125, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf6_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0126, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0128, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0142, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0143, 0xff, 0xff, 0xff) },
@@ -872,7 +887,8 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0156, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0157, 0xff, 0xff, 0xff),
 	  .driver_info = (kernel_ulong_t)&net_intf5_blacklist },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0158, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0158, 0xff, 0xff, 0xff),
+	  .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0159, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0161, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0162, 0xff, 0xff, 0xff) },
@@ -880,13 +896,22 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0165, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0167, 0xff, 0xff, 0xff),
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0191, 0xff, 0xff, 0xff), /* ZTE EuFi890 */
+	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0199, 0xff, 0xff, 0xff), /* ZTE MF820S */
+	  .driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0257, 0xff, 0xff, 0xff), /* ZTE MF821 */
+	  .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0326, 0xff, 0xff, 0xff),
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff),
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff),
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff),
+	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1021, 0xff, 0xff, 0xff),
+	  .driver_info = (kernel_ulong_t)&net_intf2_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1057, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1058, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1059, 0xff, 0xff, 0xff) },
@@ -1002,18 +1027,24 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1169, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1170, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1244, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1245, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1245, 0xff, 0xff, 0xff),
+	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1246, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1247, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1247, 0xff, 0xff, 0xff),
+	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1248, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1249, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1250, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1251, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1252, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1252, 0xff, 0xff, 0xff),
+	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1253, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1254, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1255, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1256, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1254, 0xff, 0xff, 0xff),
+	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1255, 0xff, 0xff, 0xff),
+	  .driver_info = (kernel_ulong_t)&zte_1255_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1256, 0xff, 0xff, 0xff),
+	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1257, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1258, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1259, 0xff, 0xff, 0xff) },
@@ -1058,8 +1089,16 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1298, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1299, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1300, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1401, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1402, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1424, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1425, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1426, 0xff, 0xff, 0xff),  /* ZTE MF91 */
+		.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff,
 	  0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) },
@@ -1071,15 +1110,21 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0094, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0130, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0133, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0141, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0130, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0133, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0141, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0147, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0152, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0168, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0168, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0170, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0176, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0176, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
 
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) },
@@ -1244,8 +1289,9 @@ static struct usb_serial_driver option_1port_device = {
 	.tiocmget          = usb_wwan_tiocmget,
 	.tiocmset          = usb_wwan_tiocmset,
 	.ioctl             = usb_wwan_ioctl,
-	.attach            = usb_wwan_startup,
+	.attach            = option_attach,
 	.release           = option_release,
+	.port_probe        = usb_wwan_port_probe,
 	.port_remove	   = usb_wwan_port_remove,
 	.read_int_callback = option_instat_callback,
 #ifdef CONFIG_PM
@@ -1291,8 +1337,6 @@ static bool is_blacklisted(const u8 ifnum, enum option_blacklist_reason reason,
 static int option_probe(struct usb_serial *serial,
 			const struct usb_device_id *id)
 {
-	struct usb_wwan_intf_private *data;
-	struct option_private *priv;
 	struct usb_interface_descriptor *iface_desc =
 				&serial->interface->cur_altsetting->desc;
 	struct usb_device_descriptor *dev_desc = &serial->dev->descriptor;
@@ -1330,6 +1374,19 @@ static int option_probe(struct usb_serial *serial,
 		iface_desc->bInterfaceClass != USB_CLASS_CDC_DATA)
 		return -ENODEV;
 
+	/* Store device id so we can use it during attach. */
+	usb_set_serial_data(serial, (void *)id);
+
+	return 0;
+}
+
+static int option_attach(struct usb_serial *serial)
+{
+	struct usb_interface_descriptor *iface_desc;
+	const struct usb_device_id *id;
+	struct usb_wwan_intf_private *data;
+	struct option_private *priv;
+
 	data = kzalloc(sizeof(struct usb_wwan_intf_private), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
@@ -1340,6 +1397,10 @@ static int option_probe(struct usb_serial *serial,
 		return -ENOMEM;
 	}
 
+	/* Retrieve device id stored at probe. */
+	id = usb_get_serial_data(serial);
+	iface_desc = &serial->interface->cur_altsetting->desc;
+
 	priv->bInterfaceNumber = iface_desc->bInterfaceNumber;
 	data->private = priv;
 
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index 933241f03fd8..cee9a52ca891 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -137,8 +137,8 @@ static int oti6858_chars_in_buffer(struct tty_struct *tty);
 static int oti6858_tiocmget(struct tty_struct *tty);
 static int oti6858_tiocmset(struct tty_struct *tty,
 				unsigned int set, unsigned int clear);
-static int oti6858_startup(struct usb_serial *serial);
-static void oti6858_release(struct usb_serial *serial);
+static int oti6858_port_probe(struct usb_serial_port *port);
+static int oti6858_port_remove(struct usb_serial_port *port);
 
 /* device info */
 static struct usb_serial_driver oti6858_device = {
@@ -161,8 +161,8 @@ static struct usb_serial_driver oti6858_device = {
 	.write_bulk_callback =	oti6858_write_bulk_callback,
 	.write_room =		oti6858_write_room,
 	.chars_in_buffer =	oti6858_chars_in_buffer,
-	.attach =		oti6858_startup,
-	.release =		oti6858_release,
+	.port_probe =		oti6858_port_probe,
+	.port_remove =		oti6858_port_remove,
 };
 
 static struct usb_serial_driver * const serial_drivers[] = {
@@ -331,36 +331,33 @@ static void send_data(struct work_struct *work)
 	usb_serial_port_softint(port);
 }
 
-static int oti6858_startup(struct usb_serial *serial)
+static int oti6858_port_probe(struct usb_serial_port *port)
 {
-	struct usb_serial_port *port = serial->port[0];
 	struct oti6858_private *priv;
-	int i;
-
-	for (i = 0; i < serial->num_ports; ++i) {
-		priv = kzalloc(sizeof(struct oti6858_private), GFP_KERNEL);
-		if (!priv)
-			break;
-
-		spin_lock_init(&priv->lock);
-		init_waitqueue_head(&priv->intr_wait);
-/*		INIT_WORK(&priv->setup_work, setup_line, serial->port[i]); */
-/*		INIT_WORK(&priv->write_work, send_data, serial->port[i]); */
-		priv->port = port;
-		INIT_DELAYED_WORK(&priv->delayed_setup_work, setup_line);
-		INIT_DELAYED_WORK(&priv->delayed_write_work, send_data);
-
-		usb_set_serial_port_data(serial->port[i], priv);
-	}
-	if (i == serial->num_ports)
-		return 0;
 
-	for (--i; i >= 0; --i) {
-		priv = usb_get_serial_port_data(serial->port[i]);
-		kfree(priv);
-		usb_set_serial_port_data(serial->port[i], NULL);
-	}
-	return -ENOMEM;
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	spin_lock_init(&priv->lock);
+	init_waitqueue_head(&priv->intr_wait);
+	priv->port = port;
+	INIT_DELAYED_WORK(&priv->delayed_setup_work, setup_line);
+	INIT_DELAYED_WORK(&priv->delayed_write_work, send_data);
+
+	usb_set_serial_port_data(port, priv);
+
+	return 0;
+}
+
+static int oti6858_port_remove(struct usb_serial_port *port)
+{
+	struct oti6858_private *priv;
+
+	priv = usb_get_serial_port_data(port);
+	kfree(priv);
+
+	return 0;
 }
 
 static int oti6858_write(struct tty_struct *tty, struct usb_serial_port *port,
@@ -709,15 +706,6 @@ static int oti6858_ioctl(struct tty_struct *tty,
 	return -ENOIOCTLCMD;
 }
 
-
-static void oti6858_release(struct usb_serial *serial)
-{
-	int i;
-
-	for (i = 0; i < serial->num_ports; ++i)
-		kfree(usb_get_serial_port_data(serial->port[i]));
-}
-
 static void oti6858_read_int_callback(struct urb *urb)
 {
 	struct usb_serial_port *port =  urb->context;
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 892ebdc7a364..600241901361 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -133,12 +133,15 @@ enum pl2303_type {
 	HX,		/* HX version of the pl2303 chip */
 };
 
+struct pl2303_serial_private {
+	enum pl2303_type type;
+};
+
 struct pl2303_private {
 	spinlock_t lock;
 	wait_queue_head_t delta_msr_wait;
 	u8 line_control;
 	u8 line_status;
-	enum pl2303_type type;
 };
 
 static int pl2303_vendor_read(__u16 value, __u16 index,
@@ -167,14 +170,19 @@ static int pl2303_vendor_write(__u16 value, __u16 index,
 
 static int pl2303_startup(struct usb_serial *serial)
 {
-	struct pl2303_private *priv;
+	struct pl2303_serial_private *spriv;
 	enum pl2303_type type = type_0;
 	unsigned char *buf;
-	int i;
+
+	spriv = kzalloc(sizeof(*spriv), GFP_KERNEL);
+	if (!spriv)
+		return -ENOMEM;
 
 	buf = kmalloc(10, GFP_KERNEL);
-	if (buf == NULL)
+	if (!buf) {
+		kfree(spriv);
 		return -ENOMEM;
+	}
 
 	if (serial->dev->descriptor.bDeviceClass == 0x02)
 		type = type_0;
@@ -186,15 +194,8 @@ static int pl2303_startup(struct usb_serial *serial)
 		type = type_1;
 	dev_dbg(&serial->interface->dev, "device type: %d\n", type);
 
-	for (i = 0; i < serial->num_ports; ++i) {
-		priv = kzalloc(sizeof(struct pl2303_private), GFP_KERNEL);
-		if (!priv)
-			goto cleanup;
-		spin_lock_init(&priv->lock);
-		init_waitqueue_head(&priv->delta_msr_wait);
-		priv->type = type;
-		usb_set_serial_port_data(serial->port[i], priv);
-	}
+	spriv->type = type;
+	usb_set_serial_data(serial, spriv);
 
 	pl2303_vendor_read(0x8484, 0, serial, buf);
 	pl2303_vendor_write(0x0404, 0, serial);
@@ -213,15 +214,40 @@ static int pl2303_startup(struct usb_serial *serial)
 
 	kfree(buf);
 	return 0;
+}
 
-cleanup:
-	kfree(buf);
-	for (--i; i >= 0; --i) {
-		priv = usb_get_serial_port_data(serial->port[i]);
-		kfree(priv);
-		usb_set_serial_port_data(serial->port[i], NULL);
-	}
-	return -ENOMEM;
+static void pl2303_release(struct usb_serial *serial)
+{
+	struct pl2303_serial_private *spriv;
+
+	spriv = usb_get_serial_data(serial);
+	kfree(spriv);
+}
+
+static int pl2303_port_probe(struct usb_serial_port *port)
+{
+	struct pl2303_private *priv;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	spin_lock_init(&priv->lock);
+	init_waitqueue_head(&priv->delta_msr_wait);
+
+	usb_set_serial_port_data(port, priv);
+
+	return 0;
+}
+
+static int pl2303_port_remove(struct usb_serial_port *port)
+{
+	struct pl2303_private *priv;
+
+	priv = usb_get_serial_port_data(port);
+	kfree(priv);
+
+	return 0;
 }
 
 static int set_control_lines(struct usb_device *dev, u8 value)
@@ -240,6 +266,7 @@ static void pl2303_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	struct usb_serial *serial = port->serial;
+	struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	unsigned int cflag;
@@ -323,7 +350,7 @@ static void pl2303_set_termios(struct tty_struct *tty,
 		}
 		if (baud > 1228800) {
 			/* type_0, type_1 only support up to 1228800 baud */
-			if (priv->type != HX)
+			if (spriv->type != HX)
 				baud = 1228800;
 			else if (baud > 6000000)
 				baud = 6000000;
@@ -426,7 +453,7 @@ static void pl2303_set_termios(struct tty_struct *tty,
 	     buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]);
 
 	if (cflag & CRTSCTS) {
-		if (priv->type == HX)
+		if (spriv->type == HX)
 			pl2303_vendor_write(0x0, 0x61, serial);
 		else
 			pl2303_vendor_write(0x0, 0x41, serial);
@@ -468,10 +495,10 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct ktermios tmp_termios;
 	struct usb_serial *serial = port->serial;
-	struct pl2303_private *priv = usb_get_serial_port_data(port);
+	struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
 	int result;
 
-	if (priv->type != HX) {
+	if (spriv->type != HX) {
 		usb_clear_halt(serial->dev, port->write_urb->pipe);
 		usb_clear_halt(serial->dev, port->read_urb->pipe);
 	} else {
@@ -655,17 +682,6 @@ static void pl2303_break_ctl(struct tty_struct *tty, int break_state)
 		dev_err(&port->dev, "error sending break = %d\n", result);
 }
 
-static void pl2303_release(struct usb_serial *serial)
-{
-	int i;
-	struct pl2303_private *priv;
-
-	for (i = 0; i < serial->num_ports; ++i) {
-		priv = usb_get_serial_port_data(serial->port[i]);
-		kfree(priv);
-	}
-}
-
 static void pl2303_update_line_status(struct usb_serial_port *port,
 				      unsigned char *data,
 				      unsigned int actual_length)
@@ -827,6 +843,8 @@ static struct usb_serial_driver pl2303_device = {
 	.read_int_callback =	pl2303_read_int_callback,
 	.attach =		pl2303_startup,
 	.release =		pl2303_release,
+	.port_probe =		pl2303_port_probe,
+	.port_remove =		pl2303_port_remove,
 };
 
 static struct usb_serial_driver * const serial_drivers[] = {
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index c3ddb65c05f2..aa148c21ea40 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -138,7 +138,6 @@ MODULE_DEVICE_TABLE(usb, id_table);
 
 static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 {
-	struct usb_wwan_intf_private *data;
 	struct usb_host_interface *intf = serial->interface->cur_altsetting;
 	struct device *dev = &serial->dev->dev;
 	int retval = -ENODEV;
@@ -154,13 +153,6 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 	ifnum = intf->desc.bInterfaceNumber;
 	dev_dbg(dev, "This Interface = %d\n", ifnum);
 
-	data = kzalloc(sizeof(struct usb_wwan_intf_private),
-					 GFP_KERNEL);
-	if (!data)
-		return -ENOMEM;
-
-	spin_lock_init(&data->susp_lock);
-
 	if (nintf == 1) {
 		/* QDL mode */
 		/* Gobi 2000 has a single altsetting, older ones have two */
@@ -253,20 +245,28 @@ done:
 		}
 	}
 
-	/* Set serial->private if not returning error */
-	if (retval == 0)
-		usb_set_serial_data(serial, data);
-	else
-		kfree(data);
-
 	return retval;
 }
 
+static int qc_attach(struct usb_serial *serial)
+{
+	struct usb_wwan_intf_private *data;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	spin_lock_init(&data->susp_lock);
+
+	usb_set_serial_data(serial, data);
+
+	return 0;
+}
+
 static void qc_release(struct usb_serial *serial)
 {
 	struct usb_wwan_intf_private *priv = usb_get_serial_data(serial);
 
-	/* Free the private data allocated in qcprobe */
 	usb_set_serial_data(serial, NULL);
 	kfree(priv);
 }
@@ -285,8 +285,9 @@ static struct usb_serial_driver qcdevice = {
 	.write		     = usb_wwan_write,
 	.write_room	     = usb_wwan_write_room,
 	.chars_in_buffer     = usb_wwan_chars_in_buffer,
-	.attach		     = usb_wwan_startup,
+	.attach              = qc_attach,
 	.release	     = qc_release,
+	.port_probe          = usb_wwan_port_probe,
 	.port_remove	     = usb_wwan_port_remove,
 #ifdef CONFIG_PM
 	.suspend	     = usb_wwan_suspend,
diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c
index 2cdfdcc90b37..ffcfc962ab10 100644
--- a/drivers/usb/serial/quatech2.c
+++ b/drivers/usb/serial/quatech2.c
@@ -143,12 +143,12 @@ static void qt2_read_bulk_callback(struct urb *urb);
 
 static void qt2_release(struct usb_serial *serial)
 {
-	int i;
+	struct qt2_serial_private *serial_priv;
 
-	kfree(usb_get_serial_data(serial));
+	serial_priv = usb_get_serial_data(serial);
 
-	for (i = 0; i < serial->num_ports; i++)
-		kfree(usb_get_serial_port_data(serial->port[i]));
+	usb_free_urb(serial_priv->read_urb);
+	kfree(serial_priv);
 }
 
 static inline int calc_baud_divisor(int baudrate)
@@ -423,11 +423,16 @@ static void qt2_close(struct usb_serial_port *port)
 	port_priv->is_open = false;
 
 	spin_lock_irqsave(&port_priv->urb_lock, flags);
-	if (port_priv->write_urb->status == -EINPROGRESS)
-		usb_kill_urb(port_priv->write_urb);
+	usb_kill_urb(port_priv->write_urb);
 	port_priv->urb_in_use = false;
 	spin_unlock_irqrestore(&port_priv->urb_lock, flags);
 
+	mutex_lock(&port->serial->disc_mutex);
+	if (port->serial->disconnected) {
+		mutex_unlock(&port->serial->disc_mutex);
+		return;
+	}
+
 	/* flush the port transmit buffer */
 	i = usb_control_msg(serial->dev,
 			    usb_rcvctrlpipe(serial->dev, 0),
@@ -459,26 +464,14 @@ static void qt2_close(struct usb_serial_port *port)
 		dev_err(&port->dev, "%s - close port failed %i\n",
 			__func__, i);
 
+	mutex_unlock(&port->serial->disc_mutex);
 }
 
 static void qt2_disconnect(struct usb_serial *serial)
 {
 	struct qt2_serial_private *serial_priv = usb_get_serial_data(serial);
-	struct qt2_port_private *port_priv;
-	int i;
-
-	if (serial_priv->read_urb->status == -EINPROGRESS)
-		usb_kill_urb(serial_priv->read_urb);
-
-	usb_free_urb(serial_priv->read_urb);
 
-	for (i = 0; i < serial->num_ports; i++) {
-		port_priv = usb_get_serial_port_data(serial->port[i]);
-
-		if (port_priv->write_urb->status == -EINPROGRESS)
-			usb_kill_urb(port_priv->write_urb);
-		usb_free_urb(port_priv->write_urb);
-	}
+	usb_kill_urb(serial_priv->read_urb);
 }
 
 static int get_serial_info(struct usb_serial_port *port,
@@ -773,11 +766,9 @@ static void qt2_read_bulk_callback(struct urb *urb)
 
 static int qt2_setup_urbs(struct usb_serial *serial)
 {
-	struct usb_serial_port *port;
 	struct usb_serial_port *port0;
 	struct qt2_serial_private *serial_priv;
-	struct qt2_port_private *port_priv;
-	int pcount, status;
+	int status;
 
 	port0 = serial->port[0];
 
@@ -795,46 +786,21 @@ static int qt2_setup_urbs(struct usb_serial *serial)
 			  sizeof(serial_priv->read_buffer),
 			  qt2_read_bulk_callback, serial);
 
-	/* setup write_urb for each port */
-	for (pcount = 0; pcount < serial->num_ports; pcount++) {
-
-		port = serial->port[pcount];
-		port_priv = usb_get_serial_port_data(port);
-
-		port_priv->write_urb = usb_alloc_urb(0, GFP_KERNEL);
-		if (!port_priv->write_urb) {
-			dev_err(&serial->dev->dev,
-				"failed to alloc write_urb for port %i\n",
-				pcount);
-			return -ENOMEM;
-		}
-
-		usb_fill_bulk_urb(port_priv->write_urb,
-				  serial->dev,
-				  usb_sndbulkpipe(serial->dev,
-						  port0->
-						  bulk_out_endpointAddress),
-				  port_priv->write_buffer,
-				  sizeof(port_priv->write_buffer),
-				  qt2_write_bulk_callback, port);
-	}
-
 	status = usb_submit_urb(serial_priv->read_urb, GFP_KERNEL);
 	if (status != 0) {
 		dev_err(&serial->dev->dev,
 			"%s - submit read urb failed %i\n", __func__, status);
+		usb_free_urb(serial_priv->read_urb);
 		return status;
 	}
 
 	return 0;
-
 }
 
 static int qt2_attach(struct usb_serial *serial)
 {
 	struct qt2_serial_private *serial_priv;
-	struct qt2_port_private *port_priv;
-	int status, pcount;
+	int status;
 
 	/* power on unit */
 	status = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
@@ -854,26 +820,6 @@ static int qt2_attach(struct usb_serial *serial)
 
 	usb_set_serial_data(serial, serial_priv);
 
-	for (pcount = 0; pcount < serial->num_ports; pcount++) {
-		port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL);
-		if (!port_priv) {
-			dev_err(&serial->dev->dev,
-				"%s- kmalloc(%Zd) failed.\n", __func__,
-				sizeof(*port_priv));
-			pcount--;
-			status = -ENOMEM;
-			goto attach_failed;
-		}
-
-		spin_lock_init(&port_priv->lock);
-		spin_lock_init(&port_priv->urb_lock);
-		init_waitqueue_head(&port_priv->delta_msr_wait);
-
-		port_priv->port = serial->port[pcount];
-
-		usb_set_serial_port_data(serial->port[pcount], port_priv);
-	}
-
 	status = qt2_setup_urbs(serial);
 	if (status != 0)
 		goto attach_failed;
@@ -881,14 +827,53 @@ static int qt2_attach(struct usb_serial *serial)
 	return 0;
 
 attach_failed:
-	for (/* empty */; pcount >= 0; pcount--) {
-		port_priv = usb_get_serial_port_data(serial->port[pcount]);
-		kfree(port_priv);
-	}
 	kfree(serial_priv);
 	return status;
 }
 
+static int qt2_port_probe(struct usb_serial_port *port)
+{
+	struct usb_serial *serial = port->serial;
+	struct qt2_port_private *port_priv;
+	u8 bEndpointAddress;
+
+	port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL);
+	if (!port_priv)
+		return -ENOMEM;
+
+	spin_lock_init(&port_priv->lock);
+	spin_lock_init(&port_priv->urb_lock);
+	init_waitqueue_head(&port_priv->delta_msr_wait);
+	port_priv->port = port;
+
+	port_priv->write_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!port_priv->write_urb) {
+		kfree(port_priv);
+		return -ENOMEM;
+	}
+	bEndpointAddress = serial->port[0]->bulk_out_endpointAddress;
+	usb_fill_bulk_urb(port_priv->write_urb, serial->dev,
+				usb_sndbulkpipe(serial->dev, bEndpointAddress),
+				port_priv->write_buffer,
+				sizeof(port_priv->write_buffer),
+				qt2_write_bulk_callback, port);
+
+	usb_set_serial_port_data(port, port_priv);
+
+	return 0;
+}
+
+static int qt2_port_remove(struct usb_serial_port *port)
+{
+	struct qt2_port_private *port_priv;
+
+	port_priv = usb_get_serial_port_data(port);
+	usb_free_urb(port_priv->write_urb);
+	kfree(port_priv);
+
+	return 0;
+}
+
 static int qt2_tiocmget(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
@@ -1127,6 +1112,8 @@ static struct usb_serial_driver qt2_device = {
 	.attach              = qt2_attach,
 	.release             = qt2_release,
 	.disconnect          = qt2_disconnect,
+	.port_probe          = qt2_port_probe,
+	.port_remove         = qt2_port_remove,
 	.dtr_rts             = qt2_dtr_rts,
 	.break_ctl           = qt2_break_ctl,
 	.tiocmget            = qt2_tiocmget,
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 01d882cf3775..270860f6bb2a 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -161,7 +161,6 @@ static int sierra_probe(struct usb_serial *serial,
 {
 	int result = 0;
 	struct usb_device *udev;
-	struct sierra_intf_private *data;
 	u8 ifnum;
 
 	udev = serial->dev;
@@ -188,11 +187,6 @@ static int sierra_probe(struct usb_serial *serial,
 		return -ENODEV;
 	}
 
-	data = serial->private = kzalloc(sizeof(struct sierra_intf_private), GFP_KERNEL);
-	if (!data)
-		return -ENOMEM;
-	spin_lock_init(&data->susp_lock);
-
 	return result;
 }
 
@@ -884,11 +878,15 @@ static void sierra_dtr_rts(struct usb_serial_port *port, int on)
 
 static int sierra_startup(struct usb_serial *serial)
 {
-	struct usb_serial_port *port;
-	struct sierra_port_private *portdata;
-	struct sierra_iface_info *himemoryp = NULL;
-	int i;
-	u8 ifnum;
+	struct sierra_intf_private *intfdata;
+
+	intfdata = kzalloc(sizeof(*intfdata), GFP_KERNEL);
+	if (!intfdata)
+		return -ENOMEM;
+
+	spin_lock_init(&intfdata->susp_lock);
+
+	usb_set_serial_data(serial, intfdata);
 
 	/* Set Device mode to D0 */
 	sierra_set_power_state(serial->dev, 0x0000);
@@ -897,68 +895,71 @@ static int sierra_startup(struct usb_serial *serial)
 	if (nmea)
 		sierra_vsc_set_nmea(serial->dev, 1);
 
-	/* Now setup per port private data */
-	for (i = 0; i < serial->num_ports; i++) {
-		port = serial->port[i];
-		portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
-		if (!portdata) {
-			dev_dbg(&port->dev, "%s: kmalloc for "
-				"sierra_port_private (%d) failed!\n",
-				__func__, i);
-			return -ENOMEM;
-		}
-		spin_lock_init(&portdata->lock);
-		init_usb_anchor(&portdata->active);
-		init_usb_anchor(&portdata->delayed);
-		ifnum = i;
-		/* Assume low memory requirements */
-		portdata->num_out_urbs = N_OUT_URB;
-		portdata->num_in_urbs  = N_IN_URB;
-
-		/* Determine actual memory requirements */
-		if (serial->num_ports == 1) {
-			/* Get interface number for composite device */
-			ifnum = sierra_calc_interface(serial);
-			himemoryp =
-			    (struct sierra_iface_info *)&typeB_interface_list;
-			if (is_himemory(ifnum, himemoryp)) {
-				portdata->num_out_urbs = N_OUT_URB_HM;
-				portdata->num_in_urbs  = N_IN_URB_HM;
-			}
-		}
-		else {
-			himemoryp =
-			    (struct sierra_iface_info *)&typeA_interface_list;
-			if (is_himemory(i, himemoryp)) {
-				portdata->num_out_urbs = N_OUT_URB_HM;
-				portdata->num_in_urbs  = N_IN_URB_HM;
-			}
-		}
-		dev_dbg(&serial->dev->dev,
-			"Memory usage (urbs) interface #%d, in=%d, out=%d\n",
-			ifnum,portdata->num_in_urbs, portdata->num_out_urbs );
-		/* Set the port private data pointer */
-		usb_set_serial_port_data(port, portdata);
-	}
-
 	return 0;
 }
 
 static void sierra_release(struct usb_serial *serial)
 {
-	int i;
-	struct usb_serial_port *port;
+	struct sierra_intf_private *intfdata;
+
+	intfdata = usb_get_serial_data(serial);
+	kfree(intfdata);
+}
+
+static int sierra_port_probe(struct usb_serial_port *port)
+{
+	struct usb_serial *serial = port->serial;
 	struct sierra_port_private *portdata;
+	const struct sierra_iface_info *himemoryp;
+	u8 ifnum;
 
-	for (i = 0; i < serial->num_ports; ++i) {
-		port = serial->port[i];
-		if (!port)
-			continue;
-		portdata = usb_get_serial_port_data(port);
-		if (!portdata)
-			continue;
-		kfree(portdata);
+	portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
+	if (!portdata)
+		return -ENOMEM;
+
+	spin_lock_init(&portdata->lock);
+	init_usb_anchor(&portdata->active);
+	init_usb_anchor(&portdata->delayed);
+
+	/* Assume low memory requirements */
+	portdata->num_out_urbs = N_OUT_URB;
+	portdata->num_in_urbs  = N_IN_URB;
+
+	/* Determine actual memory requirements */
+	if (serial->num_ports == 1) {
+		/* Get interface number for composite device */
+		ifnum = sierra_calc_interface(serial);
+		himemoryp = &typeB_interface_list;
+	} else {
+		/* This is really the usb-serial port number of the interface
+		 * rather than the interface number.
+		 */
+		ifnum = port->number - serial->minor;
+		himemoryp = &typeA_interface_list;
 	}
+
+	if (is_himemory(ifnum, himemoryp)) {
+		portdata->num_out_urbs = N_OUT_URB_HM;
+		portdata->num_in_urbs  = N_IN_URB_HM;
+	}
+
+	dev_dbg(&port->dev,
+			"Memory usage (urbs) interface #%d, in=%d, out=%d\n",
+			ifnum, portdata->num_in_urbs, portdata->num_out_urbs);
+
+	usb_set_serial_port_data(port, portdata);
+
+	return 0;
+}
+
+static int sierra_port_remove(struct usb_serial_port *port)
+{
+	struct sierra_port_private *portdata;
+
+	portdata = usb_get_serial_port_data(port);
+	kfree(portdata);
+
+	return 0;
 }
 
 #ifdef CONFIG_PM
@@ -1062,6 +1063,8 @@ static struct usb_serial_driver sierra_device = {
 	.tiocmset          = sierra_tiocmset,
 	.attach            = sierra_startup,
 	.release           = sierra_release,
+	.port_probe        = sierra_port_probe,
+	.port_remove       = sierra_port_remove,
 	.suspend	   = sierra_suspend,
 	.resume		   = sierra_resume,
 	.read_int_callback = sierra_instat_callback,
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 9716efe92955..769c137f8975 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -157,13 +157,10 @@ struct spcp8x5_private {
 	u8 			line_status;
 };
 
-/* desc : when device plug in,this function would be called.
- * thanks to usb_serial subsystem,then do almost every things for us. And what
- * we should do just alloc the buffer */
-static int spcp8x5_startup(struct usb_serial *serial)
+static int spcp8x5_port_probe(struct usb_serial_port *port)
 {
+	struct usb_serial *serial = port->serial;
 	struct spcp8x5_private *priv;
-	int i;
 	enum spcp8x5_type type = SPCP825_007_TYPE;
 	u16 product = le16_to_cpu(serial->dev->descriptor.idProduct);
 
@@ -180,34 +177,27 @@ static int spcp8x5_startup(struct usb_serial *serial)
 		type = SPCP825_PHILIP_TYPE;
 	dev_dbg(&serial->dev->dev, "device type = %d\n", (int)type);
 
-	for (i = 0; i < serial->num_ports; ++i) {
-		priv = kzalloc(sizeof(struct spcp8x5_private), GFP_KERNEL);
-		if (!priv)
-			goto cleanup;
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
 
-		spin_lock_init(&priv->lock);
-		init_waitqueue_head(&priv->delta_msr_wait);
-		priv->type = type;
-		usb_set_serial_port_data(serial->port[i] , priv);
-	}
+	spin_lock_init(&priv->lock);
+	init_waitqueue_head(&priv->delta_msr_wait);
+	priv->type = type;
+
+	usb_set_serial_port_data(port , priv);
 
 	return 0;
-cleanup:
-	for (--i; i >= 0; --i) {
-		priv = usb_get_serial_port_data(serial->port[i]);
-		kfree(priv);
-		usb_set_serial_port_data(serial->port[i] , NULL);
-	}
-	return -ENOMEM;
 }
 
-/* call when the device plug out. free all the memory alloced by probe */
-static void spcp8x5_release(struct usb_serial *serial)
+static int spcp8x5_port_remove(struct usb_serial_port *port)
 {
-	int i;
+	struct spcp8x5_private *priv;
 
-	for (i = 0; i < serial->num_ports; i++)
-		kfree(usb_get_serial_port_data(serial->port[i]));
+	priv = usb_get_serial_port_data(port);
+	kfree(priv);
+
+	return 0;
 }
 
 /* set the modem control line of the device.
@@ -649,8 +639,8 @@ static struct usb_serial_driver spcp8x5_device = {
 	.ioctl 			= spcp8x5_ioctl,
 	.tiocmget 		= spcp8x5_tiocmget,
 	.tiocmset 		= spcp8x5_tiocmset,
-	.attach 		= spcp8x5_startup,
-	.release 		= spcp8x5_release,
+	.port_probe		= spcp8x5_port_probe,
+	.port_remove		= spcp8x5_port_remove,
 	.process_read_urb	= spcp8x5_process_read_urb,
 };
 
diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c
index 015810b3785b..868d1e6852e2 100644
--- a/drivers/usb/serial/ssu100.c
+++ b/drivers/usb/serial/ssu100.c
@@ -67,13 +67,6 @@ struct ssu100_port_private {
 	struct async_icount icount;
 };
 
-static void ssu100_release(struct usb_serial *serial)
-{
-	struct ssu100_port_private *priv = usb_get_serial_port_data(*serial->port);
-
-	kfree(priv);
-}
-
 static inline int ssu100_control_msg(struct usb_device *dev,
 				     u8 request, u16 data, u16 index)
 {
@@ -442,21 +435,33 @@ static int ssu100_ioctl(struct tty_struct *tty,
 
 static int ssu100_attach(struct usb_serial *serial)
 {
+	return ssu100_initdevice(serial->dev);
+}
+
+static int ssu100_port_probe(struct usb_serial_port *port)
+{
 	struct ssu100_port_private *priv;
-	struct usb_serial_port *port = *serial->port;
 
 	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
-	if (!priv) {
-		dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n", __func__,
-			sizeof(*priv));
+	if (!priv)
 		return -ENOMEM;
-	}
 
 	spin_lock_init(&priv->status_lock);
 	init_waitqueue_head(&priv->delta_msr_wait);
+
 	usb_set_serial_port_data(port, priv);
 
-	return ssu100_initdevice(serial->dev);
+	return 0;
+}
+
+static int ssu100_port_remove(struct usb_serial_port *port)
+{
+	struct ssu100_port_private *priv;
+
+	priv = usb_get_serial_port_data(port);
+	kfree(priv);
+
+	return 0;
 }
 
 static int ssu100_tiocmget(struct tty_struct *tty)
@@ -647,7 +652,8 @@ static struct usb_serial_driver ssu100_device = {
 	.open		     = ssu100_open,
 	.close		     = ssu100_close,
 	.attach              = ssu100_attach,
-	.release             = ssu100_release,
+	.port_probe          = ssu100_port_probe,
+	.port_remove         = ssu100_port_remove,
 	.dtr_rts             = ssu100_dtr_rts,
 	.process_read_urb    = ssu100_process_read_urb,
 	.tiocmget            = ssu100_tiocmget,
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 6f49392cda5b..f2530d2ef3c4 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -97,6 +97,8 @@ struct ti_device {
 
 static int ti_startup(struct usb_serial *serial);
 static void ti_release(struct usb_serial *serial);
+static int ti_port_probe(struct usb_serial_port *port);
+static int ti_port_remove(struct usb_serial_port *port);
 static int ti_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void ti_close(struct usb_serial_port *port);
 static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
@@ -221,6 +223,8 @@ static struct usb_serial_driver ti_1port_device = {
 	.num_ports		= 1,
 	.attach			= ti_startup,
 	.release		= ti_release,
+	.port_probe		= ti_port_probe,
+	.port_remove		= ti_port_remove,
 	.open			= ti_open,
 	.close			= ti_close,
 	.write			= ti_write,
@@ -249,6 +253,8 @@ static struct usb_serial_driver ti_2port_device = {
 	.num_ports		= 2,
 	.attach			= ti_startup,
 	.release		= ti_release,
+	.port_probe		= ti_port_probe,
+	.port_remove		= ti_port_remove,
 	.open			= ti_open,
 	.close			= ti_close,
 	.write			= ti_write,
@@ -347,11 +353,8 @@ module_exit(ti_exit);
 static int ti_startup(struct usb_serial *serial)
 {
 	struct ti_device *tdev;
-	struct ti_port *tport;
 	struct usb_device *dev = serial->dev;
 	int status;
-	int i;
-
 
 	dev_dbg(&dev->dev,
 		"%s - product 0x%4X, num configurations %d, configuration value %d",
@@ -399,42 +402,8 @@ static int ti_startup(struct usb_serial *serial)
 		goto free_tdev;
 	}
 
-	/* set up port structures */
-	for (i = 0; i < serial->num_ports; ++i) {
-		tport = kzalloc(sizeof(struct ti_port), GFP_KERNEL);
-		if (tport == NULL) {
-			dev_err(&dev->dev, "%s - out of memory\n", __func__);
-			status = -ENOMEM;
-			goto free_tports;
-		}
-		spin_lock_init(&tport->tp_lock);
-		tport->tp_uart_base_addr = (i == 0 ?
-				TI_UART1_BASE_ADDR : TI_UART2_BASE_ADDR);
-		tport->tp_closing_wait = closing_wait;
-		init_waitqueue_head(&tport->tp_msr_wait);
-		init_waitqueue_head(&tport->tp_write_wait);
-		if (kfifo_alloc(&tport->write_fifo, TI_WRITE_BUF_SIZE,
-								GFP_KERNEL)) {
-			dev_err(&dev->dev, "%s - out of memory\n", __func__);
-			kfree(tport);
-			status = -ENOMEM;
-			goto free_tports;
-		}
-		tport->tp_port = serial->port[i];
-		tport->tp_tdev = tdev;
-		usb_set_serial_port_data(serial->port[i], tport);
-		tport->tp_uart_mode = 0;	/* default is RS232 */
-	}
-
 	return 0;
 
-free_tports:
-	for (--i; i >= 0; --i) {
-		tport = usb_get_serial_port_data(serial->port[i]);
-		kfifo_free(&tport->write_fifo);
-		kfree(tport);
-		usb_set_serial_port_data(serial->port[i], NULL);
-	}
 free_tdev:
 	kfree(tdev);
 	usb_set_serial_data(serial, NULL);
@@ -444,21 +413,50 @@ free_tdev:
 
 static void ti_release(struct usb_serial *serial)
 {
-	int i;
 	struct ti_device *tdev = usb_get_serial_data(serial);
+
+	kfree(tdev);
+}
+
+static int ti_port_probe(struct usb_serial_port *port)
+{
 	struct ti_port *tport;
 
-	for (i = 0; i < serial->num_ports; ++i) {
-		tport = usb_get_serial_port_data(serial->port[i]);
-		if (tport) {
-			kfifo_free(&tport->write_fifo);
-			kfree(tport);
-		}
+	tport = kzalloc(sizeof(*tport), GFP_KERNEL);
+	if (!tport)
+		return -ENOMEM;
+
+	spin_lock_init(&tport->tp_lock);
+	if (port == port->serial->port[0])
+		tport->tp_uart_base_addr = TI_UART1_BASE_ADDR;
+	else
+		tport->tp_uart_base_addr = TI_UART2_BASE_ADDR;
+	tport->tp_closing_wait = closing_wait;
+	init_waitqueue_head(&tport->tp_msr_wait);
+	init_waitqueue_head(&tport->tp_write_wait);
+	if (kfifo_alloc(&tport->write_fifo, TI_WRITE_BUF_SIZE, GFP_KERNEL)) {
+		kfree(tport);
+		return -ENOMEM;
 	}
+	tport->tp_port = port;
+	tport->tp_tdev = usb_get_serial_data(port->serial);
+	tport->tp_uart_mode = 0;	/* default is RS232 */
 
-	kfree(tdev);
+	usb_set_serial_port_data(port, tport);
+
+	return 0;
 }
 
+static int ti_port_remove(struct usb_serial_port *port)
+{
+	struct ti_port *tport;
+
+	tport = usb_get_serial_port_data(port);
+	kfifo_free(&tport->write_fifo);
+	kfree(tport);
+
+	return 0;
+}
 
 static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
diff --git a/drivers/usb/serial/usb-wwan.h b/drivers/usb/serial/usb-wwan.h
index 1f034d2397c6..684739b8efd0 100644
--- a/drivers/usb/serial/usb-wwan.h
+++ b/drivers/usb/serial/usb-wwan.h
@@ -8,7 +8,7 @@
 extern void usb_wwan_dtr_rts(struct usb_serial_port *port, int on);
 extern int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port);
 extern void usb_wwan_close(struct usb_serial_port *port);
-extern int usb_wwan_startup(struct usb_serial *serial);
+extern int usb_wwan_port_probe(struct usb_serial_port *port);
 extern int usb_wwan_port_remove(struct usb_serial_port *port);
 extern int usb_wwan_write_room(struct tty_struct *tty);
 extern void usb_wwan_set_termios(struct tty_struct *tty,
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index e42aa398ed37..61a73ad1a187 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -447,10 +447,12 @@ void usb_wwan_close(struct usb_serial_port *port)
 EXPORT_SYMBOL(usb_wwan_close);
 
 /* Helper functions used by usb_wwan_setup_urbs */
-static struct urb *usb_wwan_setup_urb(struct usb_serial *serial, int endpoint,
+static struct urb *usb_wwan_setup_urb(struct usb_serial_port *port,
+				      int endpoint,
 				      int dir, void *ctx, char *buf, int len,
 				      void (*callback) (struct urb *))
 {
+	struct usb_serial *serial = port->serial;
 	struct urb *urb;
 
 	if (endpoint == -1)
@@ -472,101 +474,75 @@ static struct urb *usb_wwan_setup_urb(struct usb_serial *serial, int endpoint,
 	return urb;
 }
 
-/* Setup urbs */
-static void usb_wwan_setup_urbs(struct usb_serial *serial)
+int usb_wwan_port_probe(struct usb_serial_port *port)
 {
-	int i, j;
-	struct usb_serial_port *port;
 	struct usb_wwan_port_private *portdata;
+	struct urb *urb;
+	u8 *buffer;
+	int err;
+	int i;
 
-	for (i = 0; i < serial->num_ports; i++) {
-		port = serial->port[i];
-		portdata = usb_get_serial_port_data(port);
+	portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
+	if (!portdata)
+		return -ENOMEM;
 
-		/* Do indat endpoints first */
-		for (j = 0; j < N_IN_URB; ++j) {
-			portdata->in_urbs[j] = usb_wwan_setup_urb(serial,
-								  port->
-								  bulk_in_endpointAddress,
-								  USB_DIR_IN,
-								  port,
-								  portdata->
-								  in_buffer[j],
-								  IN_BUFLEN,
-								  usb_wwan_indat_callback);
-		}
+	init_usb_anchor(&portdata->delayed);
 
-		/* outdat endpoints */
-		for (j = 0; j < N_OUT_URB; ++j) {
-			portdata->out_urbs[j] = usb_wwan_setup_urb(serial,
-								   port->
-								   bulk_out_endpointAddress,
-								   USB_DIR_OUT,
-								   port,
-								   portdata->
-								   out_buffer
-								   [j],
-								   OUT_BUFLEN,
-								   usb_wwan_outdat_callback);
-		}
+	for (i = 0; i < N_IN_URB; i++) {
+		buffer = (u8 *)__get_free_page(GFP_KERNEL);
+		if (!buffer)
+			goto bail_out_error;
+		portdata->in_buffer[i] = buffer;
+
+		urb = usb_wwan_setup_urb(port, port->bulk_in_endpointAddress,
+						USB_DIR_IN, port,
+						buffer, IN_BUFLEN,
+						usb_wwan_indat_callback);
+		portdata->in_urbs[i] = urb;
 	}
-}
-
-int usb_wwan_startup(struct usb_serial *serial)
-{
-	int i, j, err;
-	struct usb_serial_port *port;
-	struct usb_wwan_port_private *portdata;
-	u8 *buffer;
 
-	/* Now setup per port private data */
-	for (i = 0; i < serial->num_ports; i++) {
-		port = serial->port[i];
-		portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
-		if (!portdata) {
-			dev_dbg(&port->dev, "%s: kmalloc for usb_wwan_port_private (%d) failed!.\n",
-				__func__, i);
-			return 1;
-		}
-		init_usb_anchor(&portdata->delayed);
+	for (i = 0; i < N_OUT_URB; i++) {
+		if (port->bulk_out_endpointAddress == -1)
+			continue;
 
-		for (j = 0; j < N_IN_URB; j++) {
-			buffer = (u8 *) __get_free_page(GFP_KERNEL);
-			if (!buffer)
-				goto bail_out_error;
-			portdata->in_buffer[j] = buffer;
-		}
+		buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL);
+		if (!buffer)
+			goto bail_out_error2;
+		portdata->out_buffer[i] = buffer;
 
-		for (j = 0; j < N_OUT_URB; j++) {
-			buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL);
-			if (!buffer)
-				goto bail_out_error2;
-			portdata->out_buffer[j] = buffer;
-		}
+		urb = usb_wwan_setup_urb(port, port->bulk_out_endpointAddress,
+						USB_DIR_OUT, port,
+						buffer, OUT_BUFLEN,
+						usb_wwan_outdat_callback);
+		portdata->out_urbs[i] = urb;
+	}
 
-		usb_set_serial_port_data(port, portdata);
+	usb_set_serial_port_data(port, portdata);
 
-		if (!port->interrupt_in_urb)
-			continue;
+	if (port->interrupt_in_urb) {
 		err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 		if (err)
 			dev_dbg(&port->dev, "%s: submit irq_in urb failed %d\n",
 				__func__, err);
 	}
-	usb_wwan_setup_urbs(serial);
+
 	return 0;
 
 bail_out_error2:
-	for (j = 0; j < N_OUT_URB; j++)
-		kfree(portdata->out_buffer[j]);
+	for (i = 0; i < N_OUT_URB; i++) {
+		usb_free_urb(portdata->out_urbs[i]);
+		kfree(portdata->out_buffer[i]);
+	}
 bail_out_error:
-	for (j = 0; j < N_IN_URB; j++)
-		if (portdata->in_buffer[j])
-			free_page((unsigned long)portdata->in_buffer[j]);
+	for (i = 0; i < N_IN_URB; i++) {
+		usb_free_urb(portdata->in_urbs[i]);
+		free_page((unsigned long)portdata->in_buffer[i]);
+	}
 	kfree(portdata);
-	return 1;
+
+	return -ENOMEM;
 }
-EXPORT_SYMBOL(usb_wwan_startup);
+EXPORT_SYMBOL_GPL(usb_wwan_port_probe);
 
 int usb_wwan_port_remove(struct usb_serial_port *port)
 {
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 346c7efc20b0..b9fca3586d74 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -83,6 +83,8 @@ static int  whiteheat_firmware_attach(struct usb_serial *serial);
 /* function prototypes for the Connect Tech WhiteHEAT serial converter */
 static int  whiteheat_attach(struct usb_serial *serial);
 static void whiteheat_release(struct usb_serial *serial);
+static int  whiteheat_port_probe(struct usb_serial_port *port);
+static int  whiteheat_port_remove(struct usb_serial_port *port);
 static int  whiteheat_open(struct tty_struct *tty,
 			struct usb_serial_port *port);
 static void whiteheat_close(struct usb_serial_port *port);
@@ -117,6 +119,8 @@ static struct usb_serial_driver whiteheat_device = {
 	.num_ports =		4,
 	.attach =		whiteheat_attach,
 	.release =		whiteheat_release,
+	.port_probe =		whiteheat_port_probe,
+	.port_remove =		whiteheat_port_remove,
 	.open =			whiteheat_open,
 	.close =		whiteheat_close,
 	.ioctl =		whiteheat_ioctl,
@@ -218,15 +222,12 @@ static int whiteheat_attach(struct usb_serial *serial)
 {
 	struct usb_serial_port *command_port;
 	struct whiteheat_command_private *command_info;
-	struct usb_serial_port *port;
-	struct whiteheat_private *info;
 	struct whiteheat_hw_info *hw_info;
 	int pipe;
 	int ret;
 	int alen;
 	__u8 *command;
 	__u8 *result;
-	int i;
 
 	command_port = serial->port[COMMAND_PORT];
 
@@ -285,22 +286,6 @@ static int whiteheat_attach(struct usb_serial *serial)
 		 serial->type->description,
 		 hw_info->sw_major_rev, hw_info->sw_minor_rev);
 
-	for (i = 0; i < serial->num_ports; i++) {
-		port = serial->port[i];
-
-		info = kmalloc(sizeof(struct whiteheat_private), GFP_KERNEL);
-		if (info == NULL) {
-			dev_err(&port->dev,
-				"%s: Out of memory for port structures\n",
-				serial->type->description);
-			goto no_private;
-		}
-
-		info->mcr = 0;
-
-		usb_set_serial_port_data(port, info);
-	}
-
 	command_info = kmalloc(sizeof(struct whiteheat_command_private),
 								GFP_KERNEL);
 	if (command_info == NULL) {
@@ -333,16 +318,10 @@ no_firmware:
 		"%s: please contact support@connecttech.com\n",
 		serial->type->description);
 	kfree(result);
+	kfree(command);
 	return -ENODEV;
 
 no_command_private:
-	for (i = serial->num_ports - 1; i >= 0; i--) {
-		port = serial->port[i];
-		info = usb_get_serial_port_data(port);
-		kfree(info);
-no_private:
-		;
-	}
 	kfree(result);
 no_result_buffer:
 	kfree(command);
@@ -350,21 +329,36 @@ no_command_buffer:
 	return -ENOMEM;
 }
 
-
 static void whiteheat_release(struct usb_serial *serial)
 {
 	struct usb_serial_port *command_port;
-	struct whiteheat_private *info;
-	int i;
 
 	/* free up our private data for our command port */
 	command_port = serial->port[COMMAND_PORT];
 	kfree(usb_get_serial_port_data(command_port));
+}
 
-	for (i = 0; i < serial->num_ports; i++) {
-		info = usb_get_serial_port_data(serial->port[i]);
-		kfree(info);
-	}
+static int whiteheat_port_probe(struct usb_serial_port *port)
+{
+	struct whiteheat_private *info;
+
+	info = kzalloc(sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	usb_set_serial_port_data(port, info);
+
+	return 0;
+}
+
+static int whiteheat_port_remove(struct usb_serial_port *port)
+{
+	struct whiteheat_private *info;
+
+	info = usb_get_serial_port_data(port);
+	kfree(info);
+
+	return 0;
 }
 
 static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port)
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 779cd954abcb..d305a5aa3a5d 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1004,6 +1004,12 @@ UNUSUAL_DEV( 0x07cf, 0x1001, 0x1000, 0x9999,
 		USB_SC_8070, USB_PR_CB, NULL,
 		US_FL_NEED_OVERRIDE | US_FL_FIX_INQUIRY ),
 
+/* Submitted by Oleksandr Chumachenko <ledest@gmail.com> */
+UNUSUAL_DEV( 0x07cf, 0x1167, 0x0100, 0x0100,
+		"Casio",
+		"EX-N1 DigitalCamera",
+		USB_SC_8070, USB_PR_DEVICE, NULL, 0),
+
 /* Submitted by Hartmut Wahl <hwahl@hwahl.de>*/
 UNUSUAL_DEV( 0x0839, 0x000a, 0x0001, 0x0001,
 		"Samsung",