summaryrefslogtreecommitdiff
path: root/drivers/net/Kconfig
diff options
context:
space:
mode:
authorJeff Garzik <jgarzik@pobox.com>2005-08-29 16:40:27 -0400
committerJeff Garzik <jgarzik@pobox.com>2005-08-29 16:40:27 -0400
commitc1b054d03f5b31c33eaa0b267c629b118eaf3790 (patch)
tree9333907ca767be24fcb3667877242976c3e3c8dd /drivers/net/Kconfig
parent559fb51ba7e66fe298b8355fabde1275b7def35f (diff)
parentbf4e70e54cf31dcca48d279c7f7e71328eebe749 (diff)
Merge /spare/repo/linux-2.6/
Diffstat (limited to 'drivers/net/Kconfig')
-rw-r--r--drivers/net/Kconfig71
1 files changed, 45 insertions, 26 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 0313af45c1ec..a6a441b969fd 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -3,6 +3,8 @@
# Network device configuration
#
+menu "Network device support"
+
config NETDEVICES
depends on NET
bool "Network device support"
@@ -21,9 +23,12 @@ config NETDEVICES
If unsure, say Y.
+# All the following symbols are dependent on NETDEVICES - do not repeat
+# that for each of the symbols.
+if NETDEVICES
+
config DUMMY
tristate "Dummy net driver support"
- depends on NETDEVICES
---help---
This is essentially a bit-bucket device (i.e. traffic you send to
this device is consigned into oblivion) with a configurable IP
@@ -43,7 +48,6 @@ config DUMMY
config BONDING
tristate "Bonding driver support"
- depends on NETDEVICES
depends on INET
---help---
Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet
@@ -61,7 +65,6 @@ config BONDING
config EQUALIZER
tristate "EQL (serial line load balancing) support"
- depends on NETDEVICES
---help---
If you have two serial connections to some other computer (this
usually requires two modems and two telephone lines) and you use
@@ -81,7 +84,6 @@ config EQUALIZER
config TUN
tristate "Universal TUN/TAP device driver support"
- depends on NETDEVICES
select CRC32
---help---
TUN/TAP provides packet reception and transmission for user space
@@ -105,7 +107,7 @@ config TUN
config NET_SB1000
tristate "General Instruments Surfboard 1000"
- depends on NETDEVICES && PNP
+ depends on PNP
---help---
This is a driver for the General Instrument (also known as
NextLevel) SURFboard 1000 internal
@@ -127,16 +129,16 @@ config NET_SB1000
If you don't have this card, of course say N.
-if NETDEVICES
source "drivers/net/arcnet/Kconfig"
-endif
+
+source "drivers/net/phy/Kconfig"
#
# Ethernet
#
menu "Ethernet (10 or 100Mbit)"
- depends on NETDEVICES && !UML
+ depends on !UML
config NET_ETHERNET
bool "Ethernet (10 or 100Mbit)"
@@ -1135,7 +1137,7 @@ config IBMLANA
config IBMVETH
tristate "IBM LAN Virtual Ethernet support"
- depends on NETDEVICES && NET_ETHERNET && PPC_PSERIES
+ depends on NET_ETHERNET && PPC_PSERIES
---help---
This driver supports virtual ethernet adapters on newer IBM iSeries
and pSeries systems.
@@ -1145,7 +1147,7 @@ config IBMVETH
be called ibmveth.
config IBM_EMAC
- tristate "IBM PPC4xx EMAC driver support"
+ bool "IBM PPC4xx EMAC driver support"
depends on 4xx
select CRC32
---help---
@@ -1154,7 +1156,7 @@ config IBM_EMAC
config IBM_EMAC_ERRMSG
bool "Verbose error messages"
- depends on IBM_EMAC
+ depends on IBM_EMAC && BROKEN
config IBM_EMAC_RXB
int "Number of receive buffers"
@@ -1320,7 +1322,7 @@ config FORCEDETH
config CS89x0
tristate "CS89x0 support"
- depends on NET_PCI && (ISA || ARCH_IXDP2X01)
+ depends on (NET_PCI && (ISA || ARCH_IXDP2X01)) || ARCH_PNX0105
---help---
Support for CS89x0 chipset based Ethernet cards. If you have a
network (Ethernet) card of this type, say Y and read the
@@ -1488,14 +1490,14 @@ config 8139CP
will be called 8139cp. This is recommended.
config 8139TOO
- tristate "RealTek RTL-8139 PCI Fast Ethernet Adapter support"
+ tristate "RealTek RTL-8129/8130/8139 PCI Fast Ethernet Adapter support"
depends on NET_PCI && PCI
select CRC32
select MII
---help---
This is a driver for the Fast Ethernet PCI network cards based on
- the RTL8139 chips. If you have one of those, say Y and read
- the Ethernet-HOWTO <http://www.tldp.org/docs.html#howto>.
+ the RTL 8129/8130/8139 chips. If you have one of those, say Y and
+ read the Ethernet-HOWTO <http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here: the module
will be called 8139too. This is recommended.
@@ -1758,7 +1760,7 @@ endmenu
#
menu "Ethernet (1000 Mbit)"
- depends on NETDEVICES && !UML
+ depends on !UML
config ACENIC
tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support"
@@ -2089,7 +2091,7 @@ endmenu
#
menu "Ethernet (10000 Mbit)"
- depends on NETDEVICES && !UML
+ depends on !UML
config CHELSIO_T1
tristate "Chelsio 10Gb Ethernet support"
@@ -2203,11 +2205,11 @@ source "drivers/s390/net/Kconfig"
config ISERIES_VETH
tristate "iSeries Virtual Ethernet driver support"
- depends on NETDEVICES && PPC_ISERIES
+ depends on PPC_ISERIES
config FDDI
bool "FDDI driver support"
- depends on NETDEVICES && (PCI || EISA)
+ depends on (PCI || EISA)
help
Fiber Distributed Data Interface is a high speed local area network
design; essentially a replacement for high speed Ethernet. FDDI can
@@ -2256,7 +2258,7 @@ config SKFP
config HIPPI
bool "HIPPI driver support (EXPERIMENTAL)"
- depends on NETDEVICES && EXPERIMENTAL && INET && PCI
+ depends on EXPERIMENTAL && INET && PCI
help
HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and
1600Mbit/sec dual-simplex switched or point-to-point network. HIPPI
@@ -2288,7 +2290,7 @@ config ROADRUNNER_LARGE_RINGS
config PLIP
tristate "PLIP (parallel port) support"
- depends on NETDEVICES && PARPORT
+ depends on PARPORT
---help---
PLIP (Parallel Line Internet Protocol) is used to create a
reasonably fast mini network consisting of two (or, rarely, more)
@@ -2324,7 +2326,6 @@ config PLIP
config PPP
tristate "PPP (point-to-point protocol) support"
- depends on NETDEVICES
---help---
PPP (Point to Point Protocol) is a newer and better SLIP. It serves
the same purpose: sending Internet traffic over telephone (and other
@@ -2460,7 +2461,6 @@ config PPPOATM
config SLIP
tristate "SLIP (serial line) support"
- depends on NETDEVICES
---help---
Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to
connect to your Internet service provider or to connect to some
@@ -2527,7 +2527,7 @@ config SLIP_MODE_SLIP6
config NET_FC
bool "Fibre Channel driver support"
- depends on NETDEVICES && SCSI && PCI
+ depends on SCSI && PCI
help
Fibre Channel is a high speed serial protocol mainly used to connect
large storage devices to the computer; it is compatible with and
@@ -2540,7 +2540,7 @@ config NET_FC
config SHAPER
tristate "Traffic Shaper (EXPERIMENTAL)"
- depends on NETDEVICES && EXPERIMENTAL
+ depends on EXPERIMENTAL
---help---
The traffic shaper is a virtual network device that allows you to
limit the rate of outgoing data flow over some other network device.
@@ -2561,8 +2561,27 @@ config SHAPER
config NETCONSOLE
tristate "Network console logging support (EXPERIMENTAL)"
- depends on NETDEVICES && EXPERIMENTAL
+ depends on EXPERIMENTAL
---help---
If you want to log kernel messages over the network, enable this.
See <file:Documentation/networking/netconsole.txt> for details.
+endif #NETDEVICES
+
+config NETPOLL
+ def_bool NETCONSOLE
+
+config NETPOLL_RX
+ bool "Netpoll support for trapping incoming packets"
+ default n
+ depends on NETPOLL
+
+config NETPOLL_TRAP
+ bool "Netpoll traffic trapping"
+ default n
+ depends on NETPOLL
+
+config NET_POLL_CONTROLLER
+ def_bool NETPOLL
+
+endmenu