diff options
author | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2017-07-23 20:54:31 -0700 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2017-07-23 20:54:31 -0700 |
commit | 055655a9f0fefef2256310a128a4cdaff8b8c432 (patch) | |
tree | 2f7371e23c2aab9cf5134b372a0c4bdf673ed16d /drivers/iio/adc/aspeed_adc.c | |
parent | 520eccdfe187591a51ea9ab4c1a024ae4d0f68d9 (diff) | |
parent | 737cc2a593782df6846b3cab7e0f64384f58364a (diff) |
Merge tag 'iio-fixes-for-4.13a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
First set of IIO fixes for the 4.13 cycle.
* ad2s1210
- Fix negative angular velocity reads (identified by a gcc 7 warning)
* aspeed-adc
- Wait for initialization sequence to finish before enabling channels.
Without it no channels work.
* axp288
- Revert a patch that dropped some bogus register mods. No one is entirely
sure why but it breaks charging on some devices.
- Fix GPADC pin read returning 0. Turns out a small sleep is needed.
* bmc150
- Make sure device is restored to normal state after suspend / resume
cycle. Otherwise, simple sysfs reads are broken.
* tsl2563
- fix wrong event code.
* st-accel
- add spi 3-wire support. Needed to fix the lsm303agr accelerometer
which only had 3 wires in all cases. Side effect is to enable optional
3-wire support for other devices.
* st-pressure
- disable multiread by default for LPS22HB (only effects SPI)
* sun4i-gpadc-iio
- fix unbalanced irq enable / disable
* vf610
- Fix VALT slection for REFSEL bits - ensures we are using the
right reference pins.
Diffstat (limited to 'drivers/iio/adc/aspeed_adc.c')
-rw-r--r-- | drivers/iio/adc/aspeed_adc.c | 26 |
1 files changed, 26 insertions, 0 deletions
diff --git a/drivers/iio/adc/aspeed_adc.c b/drivers/iio/adc/aspeed_adc.c index e0ea411a0b2d..c02b23d675cb 100644 --- a/drivers/iio/adc/aspeed_adc.c +++ b/drivers/iio/adc/aspeed_adc.c @@ -22,6 +22,7 @@ #include <linux/iio/iio.h> #include <linux/iio/driver.h> +#include <linux/iopoll.h> #define ASPEED_RESOLUTION_BITS 10 #define ASPEED_CLOCKS_PER_SAMPLE 12 @@ -38,11 +39,17 @@ #define ASPEED_ENGINE_ENABLE BIT(0) +#define ASPEED_ADC_CTRL_INIT_RDY BIT(8) + +#define ASPEED_ADC_INIT_POLLING_TIME 500 +#define ASPEED_ADC_INIT_TIMEOUT 500000 + struct aspeed_adc_model_data { const char *model_name; unsigned int min_sampling_rate; // Hz unsigned int max_sampling_rate; // Hz unsigned int vref_voltage; // mV + bool wait_init_sequence; }; struct aspeed_adc_data { @@ -211,6 +218,24 @@ static int aspeed_adc_probe(struct platform_device *pdev) goto scaler_error; } + model_data = of_device_get_match_data(&pdev->dev); + + if (model_data->wait_init_sequence) { + /* Enable engine in normal mode. */ + writel(ASPEED_OPERATION_MODE_NORMAL | ASPEED_ENGINE_ENABLE, + data->base + ASPEED_REG_ENGINE_CONTROL); + + /* Wait for initial sequence complete. */ + ret = readl_poll_timeout(data->base + ASPEED_REG_ENGINE_CONTROL, + adc_engine_control_reg_val, + adc_engine_control_reg_val & + ASPEED_ADC_CTRL_INIT_RDY, + ASPEED_ADC_INIT_POLLING_TIME, + ASPEED_ADC_INIT_TIMEOUT); + if (ret) + goto scaler_error; + } + /* Start all channels in normal mode. */ ret = clk_prepare_enable(data->clk_scaler->clk); if (ret) @@ -274,6 +299,7 @@ static const struct aspeed_adc_model_data ast2500_model_data = { .vref_voltage = 1800, // mV .min_sampling_rate = 1, .max_sampling_rate = 1000000, + .wait_init_sequence = true, }; static const struct of_device_id aspeed_adc_matches[] = { |